Move matrix config to info.json, part 1 (#19985)

7 files changed, 20 insertions, 48 deletions

diff --git a/keyboards/jacky_studio/bear_65/config.h b/keyboards/jacky_studio/bear_65/config.h
index 0caf635045..cde00d1c4d 100644
--- a/keyboards/jacky_studio/bear_65/config.h
+++ b/keyboards/jacky_studio/bear_65/config.h
@@ -3,23 +3,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/jacky_studio/bear_65/rev1/info.json b/keyboards/jacky_studio/bear_65/rev1/info.json
index ed5768bf32..c5ae580453 100644
--- a/keyboards/jacky_studio/bear_65/rev1/info.json
+++ b/keyboards/jacky_studio/bear_65/rev1/info.json
@@ -10,6 +10,11 @@
         "pid": "0x000A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "F7", "F6", "F5", "F4", "F1", "F0"],
+        "rows": ["B0", "B1", "B2", "B3", "B7"]
+    },
+    "diode_direction": "ROW2COL",
     "backlight": {
         "pin": "B6"
     },
diff --git a/keyboards/jacky_studio/bear_65/rev2/info.json b/keyboards/jacky_studio/bear_65/rev2/info.json
index 147dc2ade4..26e7ee3f33 100644
--- a/keyboards/jacky_studio/bear_65/rev2/info.json
+++ b/keyboards/jacky_studio/bear_65/rev2/info.json
@@ -10,6 +10,11 @@
         "pid": "0x0428",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "F7", "F6", "F5", "F4", "F1", "F0"],
+        "rows": ["B0", "B1", "B2", "B3", "B7"]
+    },
+    "diode_direction": "ROW2COL",
     "backlight": {
         "pin": "B6"
     },
diff --git a/keyboards/jacky_studio/s7_elephant/rev1/config.h b/keyboards/jacky_studio/s7_elephant/rev1/config.h
index d7a8bf543b..7b1324e3f3 100644
--- a/keyboards/jacky_studio/s7_elephant/rev1/config.h
+++ b/keyboards/jacky_studio/s7_elephant/rev1/config.h
@@ -16,20 +16,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { B6, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7, F1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/jacky_studio/s7_elephant/rev1/info.json b/keyboards/jacky_studio/s7_elephant/rev1/info.json
index f2e51f63ac..685504afb1 100644
--- a/keyboards/jacky_studio/s7_elephant/rev1/info.json
+++ b/keyboards/jacky_studio/s7_elephant/rev1/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0007",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B6", "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "C6", "C7", "F4", "F5", "F6", "F7", "F1"],
+        "rows": ["B0", "B1", "B2", "B3", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/jacky_studio/s7_elephant/rev2/config.h b/keyboards/jacky_studio/s7_elephant/rev2/config.h
index 1a6e9cea9e..1359eafc9a 100644
--- a/keyboards/jacky_studio/s7_elephant/rev2/config.h
+++ b/keyboards/jacky_studio/s7_elephant/rev2/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- *
- *                        0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0, E6 }
-
-#define DIODE_DIRECTION ROW2COL
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/jacky_studio/s7_elephant/rev2/info.json b/keyboards/jacky_studio/s7_elephant/rev2/info.json
index 639b5a3897..dac233ecc1 100644
--- a/keyboards/jacky_studio/s7_elephant/rev2/info.json
+++ b/keyboards/jacky_studio/s7_elephant/rev2/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0008",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "F7", "F6", "F5", "F4", "F1", "F0", "E6"],
+        "rows": ["B0", "B1", "B2", "B3", "B7"]
+    },
+    "diode_direction": "ROW2COL",
     "backlight": {
         "pin": "B6",
         "levels": 15