[Keyboard] move @GlenPickle 's chimera* boards into a folder (#16072)

9 files changed, 482 insertions, 0 deletions

diff --git a/keyboards/glenpickle/chimera_ortho/chimera_ortho.c b/keyboards/glenpickle/chimera_ortho/chimera_ortho.c
new file mode 100644
index 0000000000..2cdc3d9331
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/chimera_ortho.c
@@ -0,0 +1,16 @@
+#include "chimera_ortho.h"
+
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init();
+}
diff --git a/keyboards/glenpickle/chimera_ortho/chimera_ortho.h b/keyboards/glenpickle/chimera_ortho/chimera_ortho.h
new file mode 100644
index 0000000000..03384c9b28
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/chimera_ortho.h
@@ -0,0 +1,61 @@
+#pragma once
+
+#include "quantum.h"
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+/*
+#define LED_B 5
+#define LED_R 6
+#define LED_G 7
+
+#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+
+#define red_led_on   PORTF |= (1<<LED_R)
+#define red_led_off  PORTF &= ~(1<<LED_R)
+#define grn_led_on   PORTF |= (1<<LED_G)
+#define grn_led_off  PORTF &= ~(1<<LED_G)
+#define blu_led_on   PORTF |= (1<<LED_B)
+#define blu_led_off  PORTF &= ~(1<<LED_B)
+
+#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
+#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
+#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
+#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
+#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
+#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+*/
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+    k43, k00, k01, k02, k03, k04, k31,      k38, k05, k06, k07, k08, k09, k46, \
+    k42, k10, k11, k12, k13, k14, k32,      k37, k15, k16, k17, k18, k19, k47, \
+    k41, k20, k21, k22, k23, k24, k33,      k36, k25, k26, k27, k28, k29, k48, \
+                        k44, k34,                k35, k45 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
+    { XXX, k31, k32, k33, k34, k35, k36, k37, k38, XXX }, \
+    { XXX, k41, k42, k43, k44, k45, k46, k47, k48, XXX } \
+}
diff --git a/keyboards/glenpickle/chimera_ortho/config.h b/keyboards/glenpickle/chimera_ortho/config.h
new file mode 100644
index 0000000000..3d86343a67
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/config.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    unknown
+#define PRODUCT         Chimera Ortho
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 10
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/glenpickle/chimera_ortho/info.json b/keyboards/glenpickle/chimera_ortho/info.json
new file mode 100644
index 0000000000..73e15c64f3
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/info.json
@@ -0,0 +1,56 @@
+{
+  "keyboard_name": "Chimera Ortho",
+  "maintainer": "qmk",
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label": "Esc", "x": 0, "y": 0},
+        {"label": "Q", "x": 1, "y": 0},
+        {"label": "W", "x": 2, "y": 0},
+        {"label": "E", "x": 3, "y": 0},
+        {"label": "R", "x": 4, "y": 0},
+        {"label": "T", "x": 5, "y": 0},
+        {"label": "{", "x": 6, "y": 0},
+        {"label": "}", "x": 8.5, "y": 0},
+        {"label": "Y", "x": 9.5, "y": 0},
+        {"label": "U", "x": 10.5, "y": 0},
+        {"label": "I", "x": 11.5, "y": 0},
+        {"label": "O", "x": 12.5, "y": 0},
+        {"label": "P", "x": 13.5, "y": 0},
+        {"label": "\"", "x": 14.5, "y": 0},
+        {"label": "Tab", "x": 0, "y": 1},
+        {"label": "A", "x": 1, "y": 1},
+        {"label": "S", "x": 2, "y": 1},
+        {"label": "D", "x": 3, "y": 1},
+        {"label": "F", "x": 4, "y": 1},
+        {"label": "G", "x": 5, "y": 1},
+        {"label": "-", "x": 6, "y": 1},
+        {"label": "1", "x": 8.5, "y": 1},
+        {"label": "H", "x": 9.5, "y": 1},
+        {"label": "J", "x": 10.5, "y": 1},
+        {"label": "K", "x": 11.5, "y": 1},
+        {"label": "L", "x": 12.5, "y": 1},
+        {"label": ";", "x": 13.5, "y": 1},
+        {"label": "Enter", "x": 14.5, "y": 1},
+        {"label": "(", "x": 0, "y": 2},
+        {"label": "Z", "x": 1, "y": 2},
+        {"label": "X", "x": 2, "y": 2},
+        {"label": "C", "x": 3, "y": 2},
+        {"label": "V", "x": 4, "y": 2},
+        {"label": "B", "x": 5, "y": 2},
+        {"label": "=", "x": 6, "y": 2},
+        {"label": "8", "x": 8.5, "y": 2},
+        {"label": "N", "x": 9.5, "y": 2},
+        {"label": "M", "x": 10.5, "y": 2},
+        {"label": ", ", "x": 11.5, "y": 2},
+        {"label": ".", "x": 12.5, "y": 2},
+        {"label": "/", "x": 13.5, "y": 2},
+        {"label": ")", "x": 14.5, "y": 2},
+        {"label": "Num Layer", "x": 4, "y": 3.25},
+        {"label": "Back Space", "x": 5, "y": 3.25},
+        {"label": "Space", "x": 9.5, "y": 3.25},
+        {"label": "Symbol Layer", "x": 10.5, "y": 3.25}
+      ]
+    }
+  }
+}
diff --git a/keyboards/glenpickle/chimera_ortho/keymaps/default/config.h b/keyboards/glenpickle/chimera_ortho/keymaps/default/config.h
new file mode 100644
index 0000000000..bdfd4db80f
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/keymaps/default/config.h
@@ -0,0 +1,5 @@
+#pragma once
+
+// place overrides here
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
diff --git a/keyboards/glenpickle/chimera_ortho/keymaps/default/keymap.c b/keyboards/glenpickle/chimera_ortho/keymaps/default/keymap.c
new file mode 100644
index 0000000000..6a676493dd
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/keymaps/default/keymap.c
@@ -0,0 +1,179 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_ortho_layers {
+  _QWERTY,
+  _CAPS,
+  _NUMPAD,
+  _SYMBOLS,
+  _MACROS,
+  _NAV
+};
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+#define KC_SPFN LT(_NAV,KC_EQL)
+#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
+#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
+#define KC_SPLT MT(MOD_LALT, KC_MINS)
+#define KC_SPRT MT(MOD_LALT, KC_1)
+#define KC_GBRC MT(MOD_RGUI, KC_8)
+#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+enum custom_keycodes {
+  KC_INCL = SAFE_RANGE,
+  KC_PULL,
+  KC_PUSH,
+  KC_SCAP,
+  KC_SCOF
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------+-------.
+     KC_MESC, KC_Q  , KC_W  , KC_E  , KC_R  , KC_T  ,KC_SCTL,      KC_SCTR, KC_Y  , KC_U  , KC_I  , KC_O  , KC_P  ,KC_QUOT,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     KC_TAB , KC_A  , KC_S  , KC_D  , KC_F  , KC_G  ,KC_SPLT,      KC_SPRT, KC_H  , KC_J  , KC_K  , KC_L  ,KC_SCLN,KC_ENT ,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     KC_LSPO, KC_Z  , KC_X  , KC_C  , KC_V  , KC_B  ,KC_SPFN,      KC_GBRC, KC_N  , KC_M  ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSPC,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+                                     KC_NMPD,KC_BSPC,                      KC_SPC ,KC_SYMB
+  // \------------------------------+-------+-------+------/       \------+-------+-------+------------------------------/
+  ),
+
+  [_CAPS] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------+-------.
+     _______,_______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,KC_UNDS,      _______,_______,_______,_______,_______,KC_COLN,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     KC_SCOF,_______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,_______,_______,KC_SCOF,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+                                     _______,_______,                      _______,_______
+  // \------------------------------+-------+-------+------/       \------+-------+-------+------------------------------/
+  ),
+
+  [_NUMPAD] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------+-------.
+     _______,_______,KC_COLN,_______,_______,_______,_______,      _______,_______, KC_7  , KC_8  , KC_9  ,KC_ASTR,KC_MINS,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______,_______,KC_DOT ,_______,_______,_______,_______,      _______,_______, KC_4  , KC_5  , KC_6  ,KC_PLUS,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,_______,      _______,_______, KC_1  , KC_2  , KC_3  ,KC_SLSH,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+                                     _______,_______,                      _______, KC_0
+  // \------------------------------+-------+-------+------/       \------+-------+-------+------------------------------/
+  ),
+
+  [_SYMBOLS] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------+-------.
+     _______,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC,_______,      _______,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSLS,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 ,_______,      _______,KC_TILD,KC_COLN,KC_UNDS,KC_LCBR,KC_RCBR,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______, KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,_______,      _______,KC_GRV ,KC_SCLN,KC_MINS,KC_LBRC,KC_RBRC,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+                                     KC_PIPE,_______,                      _______,_______
+  // \------------------------------+-------+-------+------/       \------+-------+-------+------------------------------/
+  ),
+
+  [_NAV] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------+-------.
+     _______,_______,_______,_______,_______,_______,_______,      _______,_______,_______, KC_UP ,_______,KC_PSCR,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,_______,      _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,_______,      _______,_______,KC_PGUP,KC_PGDN,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+                                     _______,KC_DEL ,                      _______,_______
+  // \------------------------------+-------+-------+------/       \------+-------+-------+------------------------------/
+  ),
+
+  [_MACROS] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------+-------.
+     _______,_______,_______,_______,_______,_______,_______,      _______,_______,_______,KC_INCL,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,KC_CAD ,_______,_______,_______,      _______,_______,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+     KC_SCAP,_______,_______,_______,_______,_______,_______,      _______,_______,_______,KC_PULL,KC_PUSH,_______,KC_SCAP,
+  //|-------+-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------+-------|
+                                     _______,_______,                      _______,_______
+  // \------------------------------+-------+-------+------/       \------+-------+-------+------------------------------/
+  )
+
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch(keycode) {
+    /* include some kind of library or header */
+    case KC_INCL:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>" SS_TAP(X_LEFT));
+      }
+      return false;
+    case KC_PULL:
+      if (record->event.pressed) {
+        SEND_STRING("git pull" SS_TAP(X_ENTER));
+      }
+      return false;
+    case KC_PUSH:
+      if (record->event.pressed){
+        SEND_STRING("git push" SS_TAP(X_ENTER));
+      }
+      return false;
+    case KC_SCAP:
+      if (record->event.pressed){
+        layer_on(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      return false;
+    case KC_SCOF:
+      if (record->event.pressed){
+        layer_off(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      return false;
+  }
+  return true;
+};
+
+
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+
+    switch (layer) {
+      case _QWERTY:
+          set_led_green;
+          break;
+        case _CAPS:
+      set_led_white;
+      break;
+        case _NUMPAD:
+            set_led_blue;
+            break;
+        case _SYMBOLS:
+            set_led_red;
+            break;
+        case _NAV:
+      set_led_magenta;
+      break;
+        case _MACROS:
+      set_led_cyan;
+      break;
+       default:
+            set_led_green;
+            break;
+    }
+};
diff --git a/keyboards/glenpickle/chimera_ortho/matrix.c b/keyboards/glenpickle/chimera_ortho/matrix.c
new file mode 100644
index 0000000000..a92c3e8431
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/matrix.c
@@ -0,0 +1,65 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
+
+void matrix_init_custom(void) {
+    uart_init(1000000);
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    uint32_t timeout = 0;
+    bool changed = false;
+
+    //the s character requests the RF slave to send the matrix
+    uart_write('s');
+
+    //trust the external keystates entirely, erase the last data
+    uint8_t uart_data[11] = {0};
+
+    //there are 10 bytes corresponding to 10 columns, and an end byte
+    for (uint8_t i = 0; i < 11; i++) {
+        //wait for the serial data, timeout if it's been too long
+        //this only happened in testing with a loose wire, but does no
+        //harm to leave it in here
+        while (!uart_available()) {
+            timeout++;
+            if (timeout > 10000) {
+                break;
+            }
+        }
+        uart_data[i] = uart_read();
+    }
+
+    //check for the end packet, the key state bytes use the LSBs, so 0xE0
+    //will only show up here if the correct bytes were recieved
+    if (uart_data[10] == 0xE0) {
+        //shifting and transferring the keystates to the QMK matrix variable
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5;
+            if (current_matrix[i] != current_row) {
+                changed = true;
+            }
+            current_matrix[i] = current_row;
+        }
+    }
+
+    return changed;
+}
diff --git a/keyboards/glenpickle/chimera_ortho/readme.md b/keyboards/glenpickle/chimera_ortho/readme.md
new file mode 100644
index 0000000000..bff001d3c9
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/readme.md
@@ -0,0 +1,19 @@
+# Chimera Ortho
+
+![Chimera Ortho](https://imgur.com/pbdNsoP.jpg)
+
+A split wireless 40% ortholinear keyboard 
+
+Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)  
+
+
+Hardware Supported: Chimera Ortho PCB, WaveShare core nRF51822
+
+Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ortho/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make glenpickle/chimera_ortho:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
diff --git a/keyboards/glenpickle/chimera_ortho/rules.mk b/keyboards/glenpickle/chimera_ortho/rules.mk
new file mode 100644
index 0000000000..8cb1736147
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+CUSTOM_MATRIX = lite
+
+# project specific files
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c