[Keyboard] move @GlenPickle 's chimera* boards into a folder (#16072)

8 files changed, 409 insertions, 0 deletions

diff --git a/keyboards/glenpickle/chimera_ergo/chimera_ergo.c b/keyboards/glenpickle/chimera_ergo/chimera_ergo.c
new file mode 100644
index 0000000000..47653c2e4b
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/chimera_ergo.c
@@ -0,0 +1,16 @@
+#include "chimera_ergo.h"
+
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init();
+}
diff --git a/keyboards/glenpickle/chimera_ergo/chimera_ergo.h b/keyboards/glenpickle/chimera_ergo/chimera_ergo.h
new file mode 100644
index 0000000000..b8897ac14e
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/chimera_ergo.h
@@ -0,0 +1,62 @@
+#pragma once
+
+#include "quantum.h"
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+/*
+#define LED_B 5
+#define LED_R 6
+#define LED_G 7
+
+#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+
+#define red_led_on   PORTF |= (1<<LED_R)
+#define red_led_off  PORTF &= ~(1<<LED_R)
+#define grn_led_on   PORTF |= (1<<LED_G)
+#define grn_led_off  PORTF &= ~(1<<LED_G)
+#define blu_led_on   PORTF |= (1<<LED_B)
+#define blu_led_off  PORTF &= ~(1<<LED_B)
+
+#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
+#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
+#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
+#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
+#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
+#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+*/
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+    k10, k05, k22, k42, k33, k34,      k37, k38, k48, k29, k49, k1B, \
+    k20, k31, k12, k03, k14, k24,      k27, k17, k08, k19, k3A, k2B, \
+    k30, k21, k02, k13, k04, k40,      k46, k07, k18, k09, k2A, k3B, \
+    k15, k44, k32, k23, k43, k41,      k06, k47, k28, k39, k4A, k16, \
+                        k35, k25,      k26, k36 \
+) { \
+    { XXX, XXX, k02, k03, k04, k05, k06, k07, k08, k09, XXX, XXX }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1B }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B }, \
+    { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4A, XXX } \
+}
diff --git a/keyboards/glenpickle/chimera_ergo/config.h b/keyboards/glenpickle/chimera_ergo/config.h
new file mode 100644
index 0000000000..3c0cc5c162
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/config.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    unknown
+#define PRODUCT         Chimera Ergo
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/glenpickle/chimera_ergo/info.json b/keyboards/glenpickle/chimera_ergo/info.json
new file mode 100644
index 0000000000..28a9689bae
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/info.json
@@ -0,0 +1,10 @@
+{
+  "keyboard_name": "Chimera Ergo",
+  "url": "",
+  "maintainer": "qmk",
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"label":"k00", "x":0, "y":1}, {"label":"k01", "x":1, "y":0.75}, {"label":"k02", "x":2, "y":0.25}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0.25}, {"label":"k05", "x":5, "y":0.5}, {"label":"k06", "x":7, "y":0.5}, {"label":"k07", "x":8, "y":0.25}, {"label":"k08", "x":9, "y":0}, {"label":"k09", "x":10, "y":0.25}, {"label":"k10", "x":11, "y":0.75}, {"label":"k11", "x":12, "y":1}, {"label":"k12", "x":0, "y":2}, {"label":"k13", "x":1, "y":1.75}, {"label":"k14", "x":2, "y":1.25}, {"label":"k15", "x":3, "y":1}, {"label":"k16", "x":4, "y":1.25}, {"label":"k17", "x":5, "y":1.5}, {"label":"k18", "x":7, "y":1.5}, {"label":"k19", "x":8, "y":1.25}, {"label":"k20", "x":9, "y":1}, {"label":"k21", "x":10, "y":1.25}, {"label":"k22", "x":11, "y":1.75}, {"label":"k23", "x":12, "y":2}, {"label":"k24", "x":0, "y":3}, {"label":"k25", "x":1, "y":2.75}, {"label":"k26", "x":2, "y":2.25}, {"label":"k27", "x":3, "y":2}, {"label":"k28", "x":4, "y":2.25}, {"label":"k29", "x":5, "y":2.5}, {"label":"k30", "x":7, "y":2.5}, {"label":"k31", "x":8, "y":2.25}, {"label":"k32", "x":9, "y":2}, {"label":"k33", "x":10, "y":2.25}, {"label":"k34", "x":11, "y":2.75}, {"label":"k35", "x":12, "y":3}, {"label":"k36", "x":0, "y":4}, {"label":"k37", "x":1, "y":3.75}, {"label":"k38", "x":2, "y":3.25}, {"label":"k39", "x":3, "y":3}, {"label":"k40", "x":4, "y":3.25}, {"label":"k41", "x":5, "y":3.5}, {"label":"k42", "x":7, "y":3.5}, {"label":"k43", "x":8, "y":3.25}, {"label":"k44", "x":9, "y":3}, {"label":"k45", "x":10, "y":3.25}, {"label":"k46", "x":11, "y":3.75}, {"label":"k47", "x":12, "y":4}, {"label":"k48", "x":4, "y":4.75}, {"label":"k49", "x":5, "y":5}, {"label":"k50", "x":7, "y":5}, {"label":"k51", "x":8, "y":4.75}]
+    }
+  }
+}
diff --git a/keyboards/glenpickle/chimera_ergo/keymaps/default/keymap.c b/keyboards/glenpickle/chimera_ergo/keymaps/default/keymap.c
new file mode 100644
index 0000000000..51ab0e92cd
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/keymaps/default/keymap.c
@@ -0,0 +1,159 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_ergo_layers
+{
+  _QWERTY,
+  _CAPS,
+  _NUMPAD,
+  _SYMBOLS,
+  _MACROS,
+  _NAV
+};
+
+enum custom_keycodes {
+  SC_INCL = SAFE_RANGE,
+  SC_PULL,
+  SC_PUSH,
+  SC_SCAP,
+  SC_SCOF
+};
+
+#define SC_NMPD TG(_NUMPAD)
+#define SC_SYMB TG(_SYMBOLS)
+#define SC_SPFN LT(_NAV,KC_EQL)
+#define SC_SCTL MT(MOD_LCTL, KC_LBRC)
+#define SC_SCTR MT(MOD_LCTL, KC_RBRC)
+#define SC_SPLT MT(MOD_LALT, KC_MINS)
+#define SC_SPRT MT(MOD_LALT, KC_1)
+#define SC_GBRC MT(MOD_RGUI, KC_RBRC)
+#define SC_MESC LT(_MACROS, KC_ESC)
+#define SC_CAD LALT(LCTL(KC_DEL))
+
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+     KC_LBRC, KC_1,    SC_SCTL, SC_SPLT, SC_SPFN, KC_5,          KC_6,    SC_GBRC, SC_SPRT, SC_SCTR, KC_0,    KC_RBRC,
+     SC_MESC, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,          KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT,
+     KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,          KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+     KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,          KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+                                         SC_NMPD, KC_BSPC,       KC_SPC,  SC_SYMB
+  ),
+
+  [_CAPS] = LAYOUT(
+     _______, KC_UNDS, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______,
+     _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______,
+     _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, KC_COLN, _______,
+     SC_SCOF, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, SC_SCOF,
+                                         _______, _______,       _______, _______
+  ),
+
+  [_NUMPAD] = LAYOUT(
+     _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, KC_MINS, _______,
+     _______, _______, KC_COLN, _______, _______, _______,       _______, KC_7,    KC_8,    KC_9,    KC_ASTR, _______,
+     _______, _______, KC_DOT , _______, _______, _______,       _______, KC_4,    KC_5,    KC_6,    KC_PLUS, _______,
+     _______, _______, _______, _______, _______, _______,       _______, KC_1,    KC_2,    KC_3,    KC_SLSH, _______,
+                                         _______, _______,       _______, KC_0
+  ),
+
+  [_SYMBOLS] = LAYOUT(
+     _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______,
+     _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,       KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSLS,
+     KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,         KC_TILD, KC_EQL,  KC_UNDS, KC_LCBR, KC_RCBR, _______,
+     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,        KC_GRV,  KC_PLUS, KC_MINS, KC_LBRC, KC_RBRC, _______,
+                                         KC_PIPE, _______,       _______, _______
+  ),
+
+  [_MACROS] = LAYOUT(
+     _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______,
+     _______, _______, _______, _______, _______, _______,       _______, _______, SC_INCL, _______, _______, _______,
+     _______, _______, _______, SC_CAD,  _______, _______,       _______, _______, _______, _______, _______, _______,
+     SC_SCAP, _______, _______, _______, _______, _______,       _______, _______, SC_PULL, SC_PUSH, _______, _______,
+                                         _______, _______,       _______, _______
+  ),
+
+  [_NAV] = LAYOUT(
+     _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______,
+     _______, _______, _______, _______, _______, _______,       _______, KC_PGUP, KC_UP,   KC_PGDN, KC_PSCR, _______,
+     _______, _______, _______, _______, _______, _______,       _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+     _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______,
+                                         _______, KC_DEL,        _______, _______
+  ),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch(keycode) {
+    /* include some kind of library or header */
+    case SC_INCL:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>");
+        tap_code(KC_LEFT);
+      }
+      return false;
+    case SC_PULL:
+      if (record->event.pressed) {
+        SEND_STRING("git pull");
+        tap_code(KC_ENT);
+      }
+      return false;
+    case SC_PUSH:
+      if (record->event.pressed) {
+        SEND_STRING("git push");
+        tap_code(KC_ENT);
+      }
+      return false;
+    case SC_SCAP:
+      if (record->event.pressed) {
+        layer_on(_CAPS);
+        tap_code(KC_CAPS);
+      }
+      return false;
+    case SC_SCOF:
+      if (record->event.pressed) {
+        layer_off(_CAPS);
+        tap_code(KC_CAPS);
+      }
+      return false;
+    default:
+      return true;
+  }
+  return true;
+};
+
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+
+    switch (layer) {
+      case _QWERTY:
+          set_led_green;
+          break;
+        case _CAPS:
+      set_led_white;
+      break;
+        case _NUMPAD:
+            set_led_blue;
+            break;
+        case _SYMBOLS:
+            set_led_red;
+            break;
+        case _NAV:
+      set_led_magenta;
+      break;
+        case _MACROS:
+      set_led_cyan;
+      break;
+       default:
+            set_led_green;
+            break;
+    }
+};
diff --git a/keyboards/glenpickle/chimera_ergo/matrix.c b/keyboards/glenpickle/chimera_ergo/matrix.c
new file mode 100644
index 0000000000..603ad0f386
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/matrix.c
@@ -0,0 +1,65 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
+
+void matrix_init_custom(void) {
+    uart_init(1000000);
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    uint32_t timeout = 0;
+    bool changed = false;
+
+    //the s character requests the RF slave to send the matrix
+    uart_write('s');
+
+    //trust the external keystates entirely, erase the last data
+    uint8_t uart_data[14] = {0};
+
+    //there are 10 bytes corresponding to 10 columns, and an end byte
+    for (uint8_t i = 0; i < 14; i++) {
+        //wait for the serial data, timeout if it's been too long
+        //this only happened in testing with a loose wire, but does no
+        //harm to leave it in here
+        while (!uart_available()) {
+            timeout++;
+            if (timeout > 10000) {
+                break;
+            }
+        }
+        uart_data[i] = uart_read();
+    }
+
+    //check for the end packet, the key state bytes use the LSBs, so 0xE0
+    //will only show up here if the correct bytes were recieved
+    if (uart_data[10] == 0xE0) {
+        //shifting and transferring the keystates to the QMK matrix variable
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6;
+            if (current_matrix[i] != current_row) {
+                changed = true;
+            }
+            current_matrix[i] = current_row;
+        }
+    }
+
+    return changed;
+}
diff --git a/keyboards/glenpickle/chimera_ergo/readme.md b/keyboards/glenpickle/chimera_ergo/readme.md
new file mode 100644
index 0000000000..4ccd039ee0
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/readme.md
@@ -0,0 +1,16 @@
+# Chimera Ergo
+
+![Chimera Ergo](https://imgur.com/AA6ycMQ.jpg)
+
+A split wireless 40% ergonomic keyboard 
+
+Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)  
+Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822  
+Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make glenpickle/chimera_ergo:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
diff --git a/keyboards/glenpickle/chimera_ergo/rules.mk b/keyboards/glenpickle/chimera_ergo/rules.mk
new file mode 100644
index 0000000000..8cb1736147
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ergo/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+CUSTOM_MATRIX = lite
+
+# project specific files
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c