Merge remote-tracking branch 'upstream/develop'

3 files changed, 8 insertions, 77 deletions

diff --git a/keyboards/evyd13/eon95/config.h b/keyboards/evyd13/eon95/config.h
index c75fa39f79..70d07b9855 100644
--- a/keyboards/evyd13/eon95/config.h
+++ b/keyboards/evyd13/eon95/config.h
@@ -16,11 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 12
-#define MATRIX_COLS 10
 
 /*
  * Keyboard Matrix Assignments
@@ -38,73 +33,11 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-#define LED_NUM_LOCK_PIN B7
-#define LED_CAPS_LOCK_PIN D5
-#define LED_SCROLL_LOCK_PIN B0
-#define LED_PIN_ON_STATE 0
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN D0
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 12
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -121,8 +54,4 @@
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 3
diff --git a/keyboards/evyd13/eon95/info.json b/keyboards/evyd13/eon95/info.json
index c165088997..e0d2736341 100644
--- a/keyboards/evyd13/eon95/info.json
+++ b/keyboards/evyd13/eon95/info.json
@@ -8,6 +8,14 @@
         "pid": "0x8A18",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "D5",
+        "num_lock": "B7",
+        "scroll_lock": "B0",
+        "on_state": 0
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/evyd13/eon95/rules.mk b/keyboards/evyd13/eon95/rules.mk
index 30e86c0190..6ff9b4e02b 100644
--- a/keyboards/evyd13/eon95/rules.mk
+++ b/keyboards/evyd13/eon95/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #