diff options
| author | Albert Y <76888457+filterpaper@users.noreply.github.com> | 2021-11-29 16:24:12 +0800 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2021-11-29 00:24:12 -0800 |
| commit | d4b07be012777809992519006c1067200c7404ef (patch) | |
| tree | 84ac64dcad0262e991f42c6eade78ab6dfe443fe /keyboards/cradio/readme.md | |
| parent | d8324e8a9c41c23b281b9d41a38ddbd4c015ddb4 (diff) | |
[Keyboard] Add swap hands support and readme update for Cradio (#15226)
Co-authored-by: filterpaper <filterpaper@localhost>
Diffstat (limited to 'keyboards/cradio/readme.md')
| -rw-r--r-- | keyboards/cradio/readme.md | 26 |
1 files changed, 24 insertions, 2 deletions
diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md index 99cd20fb9c..e538a417dc 100644 --- a/keyboards/cradio/readme.md +++ b/keyboards/cradio/readme.md @@ -8,7 +8,8 @@ Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](htt * Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr) * Hardware Supported: - * [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions) + * [Cradio](https://github.com/davidphilipbarr/36keys/tree/master/34Keys) + * [Sweep](https://github.com/davidphilipbarr/Sweep) * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic) * [Paroxysm](https://github.com/davidphilipbarr/hypergolic/tree/main/paroxysm) * Variants of the same 34-key direct pin PCB @@ -22,7 +23,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Setting Handedness -Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are: +Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are: make cradio:default:dfu-split-left make cradio:default:dfu-split-right @@ -36,3 +37,24 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. * **Physical reset button**: Briefly press the reset button soldered on the PCB. * **Keycode in layout**: Press the key mapped to `RESET` if it is configured. + +## Swapped Pins + +If you have one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware: +```c +#undef DIRECT_PINS +#define DIRECT_PINS { \ + { D7, F7, F6, F5, F4 }, \ + { B1, B3, B2, B6, D3 }, \ + { D1, D0, D4, C6, E6 }, \ + { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ +} +#undef DIRECT_PINS_RIGHT +#define DIRECT_PINS_RIGHT { \ + { F4, F5, F6, F7, D7 }, \ + { D3, B6, B2, B3, B1 }, \ + { E6, C6, D4, D0, D1 }, \ + { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ +} +``` + |