refactor SPLIT_KEYBOARD, OLED_DRIVER_ENABLE (#10405)

2 files changed, 0 insertions, 257 deletions

diff --git a/keyboards/claw44/keymaps/yfuku/config.h b/keyboards/claw44/keymaps/yfuku/config.h
deleted file mode 100644
index 244ffa7096..0000000000
--- a/keyboards/claw44/keymaps/yfuku/config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define TAPPING_TERM 180
-#define IGNORE_MOD_TAP_INTERRUPT
diff --git a/keyboards/claw44/keymaps/yfuku/keymap.c b/keyboards/claw44/keymaps/yfuku/keymap.c
deleted file mode 100644
index 77d459b928..0000000000
--- a/keyboards/claw44/keymaps/yfuku/keymap.c
+++ /dev/null
@@ -1,221 +0,0 @@
-#include QMK_KEYBOARD_H
-#ifdef PROTOCOL_LUFA
-  #include "lufa.h"
-  #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-
-extern keymap_config_t keymap_config;
-
-extern uint8_t is_master;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE
-};
-
-enum macro_keycodes {
-  KC_SAMPLEMACRO,
-};
-
-// common
-#define KC_ KC_TRNS
-#define KC_XXXX KC_NO
-#define KC_RST RESET
-#define KC_VD KC__VOLDOWN
-#define KC_VU KC__VOLUP
-
-// layer
-#define KC_L_SPC LT(_LOWER, KC_SPC)
-#define KC_R_ENT LT(_RAISE, KC_ENT)
-
-// shift_t
-#define KC_S_TAB LSFT_T(KC_TAB)
-#define KC_S_ESC LSFT_T(KC_ESC)
-#define KC_S_JA LSFT_T(KC_LANG1)
-#define KC_S_EN LSFT_T(KC_LANG2)
-
-// cmd_t
-#define KC_M_F LCMD_T(KC_F)
-#define KC_M_D LCMD_T(KC_D)
-#define KC_M_J LCMD_T(KC_J)
-#define KC_M_K LCMD_T(KC_K)
-
-// ctl_t
-#define KC_C_S LCTL_T(KC_S)
-#define KC_C_L LCTL_T(KC_L)
-#define KC_C_BS LCTL_T(KC_BSPC)
-
-// alt_t
-#define KC_A_D ALT_T(KC_D)
-#define KC_A_K ALT_T(KC_K)
-#define KC_A_Z ALT_T(KC_Z)
-#define KC_A_SL ALT_T(KC_SLSH)
-#define KC_A_DEL ALT_T(KC_DEL)
-
-// cmd+shift_t
-#define KC_MS_Q SCMD_T(KC_Q)
-#define KC_MS_A SCMD_T(KC_A)
-#define KC_MS_S SCMD_T(KC_S)
-#define KC_MS_SC SCMD_T(KC_SCLN)
-#define KC_MS_ESC SCMD_T(KC_ESC)
-
-//
-#define KC_MR RCMD(KC_R)
-#define KC_MF RCMD(KC_F)
-#define KC_MW RCMD(KC_W)
-#define KC_MX RCMD(KC_X)
-#define KC_MC RCMD(KC_C)
-#define KC_MV RCMD(KC_V)
-#define KC_MTAB RCMD(KC_TAB)
-#define KC_MSF RCMD(RSFT(KC_F))
-#define KC_MSR RCMD(RSFT(KC_R))
-#define KC_MST RCMD(RSFT(KC_T))
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  // M_ = LCMD_T(
-  // A_ = ALT_T(
-  // C_ = LCTL_T(
-  // MS_ = SMD_T(
-  // R_ = LT(_RAISE
-  // L_ = LT(_LOWER
-
-  [_QWERTY] = LAYOUT_kc( \
-  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
-     ESC , Q  , W  , E  , R  , T  ,       Y  , U  , I  , O  , P  ,MINS,
-  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
-    S_TAB, A  ,C_S , D  ,M_F , G  ,       H  ,M_J , K  ,C_L ,SCLN,S_ESC,
-  //|----+----+----+----+----+----+     |----+----+----+----+----+----|
-         , Z  , X  , C  , V  , B  ,       N  , M  ,COMM,DOT ,SLSH,    ,
-  //`----+----+----+----+----+----/     \----+----+----+----+----+----'
-             A_DEL,S_EN,L_SPC,C_BS,      C_BS,R_ENT,S_JA,A_DEL
-  //          `----+----+----+----'     `----+----+----+----'
-  ),
-
-  //   \ ^ ! & |  @ = + * % -
-  // ( # $ " ' ~  ← ↓ ↑ → ` )
-  //         { [  ] }
-
-  [_RAISE] = LAYOUT_kc( \
-  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
-         ,BSLS,CIRC,EXLM,AMPR,PIPE,      AT  ,EQL ,PLUS,ASTR,PERC,MINS,
-  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
-     LPRN,HASH,DLR ,DQT ,QUOT,TILD,      LEFT,DOWN, UP ,RGHT,GRV ,RPRN,
-  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
-        ,     ,    ,    ,LCBR,LBRC,      RBRC,RCBR,    ,    ,    ,    ,
-  //`----+----+----+----+----+----/     \----+----+----+----+----+----'
-                   ,    ,BSPC,    ,          ,    ,    ,RST
-  //          `----+----+----+----'     `----+----+----+----'
-  ),
-
-  [_LOWER] = LAYOUT_kc( \
-  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
-         ,    ,    ,MSF ,MSR ,MST ,          ,EQL ,PLUS,ASTR,PERC,MINS,
-  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
-         , 1  , 2  , 3  , 4  , 5  ,       6  , 7  , 8  , 9  , 0  ,    ,
-  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,          ,    ,COMM,DOT ,SLSH,    ,
-  //`----+----+----+--+-+----+----/     \----+----+----+----+----+----'
-               RST ,    ,    ,    ,          ,DEL ,    ,
-  //          `----+----+----+----'     `----+----+----+----'
-  ),
-};
-
-void matrix_init_user(void) {
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    iota_gfx_init(!has_usb());   // turns on the display
-  #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-// When add source files to SRC in rules.mk, you can use functions.
-const char *read_layer_state(void);
-const char *read_logo(void);
-void set_keylog(uint16_t keycode, keyrecord_t *record);
-const char *read_keylog(void);
-const char *read_keylogs(void);
-
-// const char *read_mode_icon(bool swap);
-// const char *read_host_led_state(void);
-// void set_timelog(void);
-// const char *read_timelog(void);
-
-void matrix_scan_user(void) {
-  iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
-  if (is_master) {
-    // If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    //matrix_write_ln(matrix, read_host_led_state());
-    //matrix_write_ln(matrix, read_timelog());
-  } else {
-    matrix_write(matrix, read_logo());
-  }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-  matrix_clear(&matrix);
-  matrix_render_user(&matrix);
-  matrix_update(&display, &matrix);
-}
-#endif//SSD1306OLED
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-#ifdef SSD1306OLED
-    set_keylog(keycode, record);
-#endif
-    // set_timelog();
-  }
-
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        set_single_persistent_default_layer(_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-      } else {
-        layer_off(_LOWER);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-      } else {
-        layer_off(_RAISE);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
-