Merge remote-tracking branch 'origin/master' into develop

1 files changed, 3 insertions, 91 deletions

diff --git a/keyboards/chromatonemini/config.h b/keyboards/chromatonemini/config.h
index e92f84ba87..5bb55f8797 100644
--- a/keyboards/chromatonemini/config.h
+++ b/keyboards/chromatonemini/config.h
@@ -19,27 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, D7, C6, D4, D0, D1 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /*
  * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
  */
@@ -171,63 +150,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   endif  // CONSOLE_ENABLE
 #endif  // RGB_MATRIX_ENABLE
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-// /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-// /* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
 /* Audio */
 #ifdef AUDIO_ENABLE
 #   define AUDIO_PIN B6  // use PB6 = PIN10 as Audio output
@@ -262,19 +184,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define MIDI_INITIAL_VELOCITY 117
 #endif  //  MIDI_ENABLE
 
-/*
- * Encoder options
- */
-#ifdef ENCODER_ENABLE
-#   define ENCODERS_PAD_A { B5 }
-#   define ENCODERS_PAD_B { B4 }
-#   define ENCODER_RESOLUTION 4
-#   define TAP_CODE_DELAY 10
-
-#define ENCODERS 1
-#define ENCODERS_CW_KEY  { {7, 2} }
-#define ENCODERS_CCW_KEY { {7, 1} }
-#endif  // ENCODER_ENABLE
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
 
 /* 2021/01/22 added to shrink firmware size */
 // NO_ACTION_TAPPING -1964 bytes, however, this disables Layer mods...