Merge remote-tracking branch 'upstream/master'

29 files changed, 647 insertions, 386 deletions

diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c
index f76b7e02c8..d9a81b195a 100644
--- a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c
+++ b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c
@@ -23,12 +23,10 @@ enum custom_macros {
 
   const uint16_t PROGMEM fn_actions[] = {
       [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),    //Hold for momentary Lower layer, Tap for Space,
-      [1] = ACTION_LAYER_MOMENTARY(_MOUSE)           //Hold for momentary MOUSE
-
    };
 
 #define SPC_LW FUNC(0)
-#define MSE FUNC(1)
+#define MSE MO(_MOUSE)
 #define PIPE M(R_PIPE)
 #define POINT M(R_POINT)
 
diff --git a/keyboards/bpiphany/frosty_flake/rules.mk b/keyboards/bpiphany/frosty_flake/rules.mk
index 94619e03d1..a890c4a594 100644
--- a/keyboards/bpiphany/frosty_flake/rules.mk
+++ b/keyboards/bpiphany/frosty_flake/rules.mk
@@ -1,52 +1,15 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u2
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
diff --git a/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c
index 3ad3247d49..bd909c288c 100644
--- a/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c
+++ b/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c
@@ -14,22 +14,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_LCTL,KC_LGUI,KC_LALT,                 KC_SPC,                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT)
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-
 void matrix_init_user(void) {
 
 }
diff --git a/keyboards/bpiphany/kitten_paw/rules.mk b/keyboards/bpiphany/kitten_paw/rules.mk
index fab9c422fe..72a7f14b3f 100644
--- a/keyboards/bpiphany/kitten_paw/rules.mk
+++ b/keyboards/bpiphany/kitten_paw/rules.mk
@@ -1,54 +1,15 @@
-
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u2
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-	OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
diff --git a/keyboards/bpiphany/pegasushoof/pegasushoof.c b/keyboards/bpiphany/pegasushoof/2013/2013.c
index cde814812e..7a489b22a7 100644
--- a/keyboards/bpiphany/pegasushoof/pegasushoof.c
+++ b/keyboards/bpiphany/pegasushoof/2013/2013.c
@@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "pegasushoof.h"
+#include "2013.h"
 
 
 extern inline void ph_caps_led_on(void);
diff --git a/keyboards/bpiphany/pegasushoof/pegasushoof.h b/keyboards/bpiphany/pegasushoof/2013/2013.h
index b91235aadd..b3e911ab41 100644
--- a/keyboards/bpiphany/pegasushoof/pegasushoof.h
+++ b/keyboards/bpiphany/pegasushoof/2013/2013.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef PEGASUSHOOF_H
-#define PEGASUSHOOF_H
+#pragma once
 
 #include "matrix.h"
 #include "quantum.h"
@@ -56,21 +55,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     )
 
 #define LAYOUT_tkl_jis( \
-  KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,        KN5, KN7, KP7, \
-  KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO7, KO2,   KR4, KC4, KE4, \
-  KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2,             KQ4, KC5, KE5, \
-  KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO3, KO1,                       \
-  KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KL0,      KB3,             KC6,      \
-  KP4, KD2, KN6, KG0,           KQ6,           KH0, KI0, KN0, KM0, KP1,        KC0, KQ0, KR0  \
-  ) { /*        00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
-     /* 0 */  { KC_NO,  KC_NO,  KC0,    KC_NO,  KC_NO,  KF0,    KG0,    KH0,    KI0,    KJ0,    KK0,    KL0,    KM0,    KN0,    KO0,    KC_NO,  KQ0,    KR0   }, \
-     /* 1 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KG1,    KH1,    KI1,    KJ1,    KK1,    KL1,    KM1,    KC_NO,  KO1,    KP1,    KC_NO,  KC_NO }, \
-     /* 2 */  { KC_NO,  KB2,    KC_NO,  KD2,    KC_NO,  KF2,    KG2,    KH2,    KI2,    KJ2,    KK2,    KL2,    KM2,    KC_NO,  KO2,    KC_NO,  KC_NO,  KC_NO }, \
-     /* 3 */  { KC_NO,  KB3,    KC_NO,  KC_NO,  KC_NO,  KF3,    KG3,    KH3,    KI3,    KJ3,    KK3,    KL3,    KM3,    KC_NO,  KO3,    KC_NO,  KC_NO,  KC_NO }, \
-     /* 4 */  { KC_NO,  KC_NO,  KC4,    KC_NO,  KE4,    KF4,    KG4,    KH4,    KI4,    KJ4,    KK4,    KL4,    KM4,    KC_NO,  KO4,    KP4,    KQ4,    KR4   }, \
-     /* 5 */  { KC_NO,  KC_NO,  KC5,    KC_NO,  KE5,    KF5,    KG5,    KH5,    KI5,    KJ5,    KK5,    KL5,    KM5,    KN5,    KO5,    KP5,    KC_NO,  KC_NO }, \
-     /* 6 */  { KC_NO,  KC_NO,  KC6,    KC_NO,  KC_NO,  KF6,    KG6,    KC_NO,  KI6,    KJ6,    KK6,    KL6,    KC_NO,  KN6,    KO6,    KC_NO,  KQ6,    KC_NO }, \
-     /* 7 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KF7,    KG7,    KH7,    KI7,    KJ7,    KK7,    KL7,    KK7,    KL7,    KO7,    KP7,    KC_NO,  KC_NO }  \
+    KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,        KN5, KN7, KP7, \
+    KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO7, KO2,   KR4, KC4, KE4, \
+    KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2,             KQ4, KC5, KE5, \
+    KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO3, KO1,                       \
+    KB2,      KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KL0, KB3,             KC6,      \
+    KP4, KD2, KN6, KG0,           KQ6,           KH0, KI0, KN0, KM0, KP1,        KC0, KQ0, KR0  \
+    ) { /*         00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+        /* 0 */  { KC_NO,  KC_NO,  KC0,    KC_NO,  KC_NO,  KF0,    KG0,    KH0,    KI0,    KJ0,    KK0,    KL0,    KM0,    KN0,    KO0,    KC_NO,  KQ0,    KR0   }, \
+        /* 1 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KG1,    KH1,    KI1,    KJ1,    KK1,    KL1,    KM1,    KC_NO,  KO1,    KP1,    KC_NO,  KC_NO }, \
+        /* 2 */  { KC_NO,  KB2,    KC_NO,  KD2,    KC_NO,  KF2,    KG2,    KH2,    KI2,    KJ2,    KK2,    KL2,    KM2,    KC_NO,  KO2,    KC_NO,  KC_NO,  KC_NO }, \
+        /* 3 */  { KC_NO,  KB3,    KC_NO,  KC_NO,  KC_NO,  KF3,    KG3,    KH3,    KI3,    KJ3,    KK3,    KL3,    KM3,    KC_NO,  KO3,    KC_NO,  KC_NO,  KC_NO }, \
+        /* 4 */  { KC_NO,  KC_NO,  KC4,    KC_NO,  KE4,    KF4,    KG4,    KH4,    KI4,    KJ4,    KK4,    KL4,    KM4,    KC_NO,  KO4,    KP4,    KQ4,    KR4   }, \
+        /* 5 */  { KC_NO,  KC_NO,  KC5,    KC_NO,  KE5,    KF5,    KG5,    KH5,    KI5,    KJ5,    KK5,    KL5,    KM5,    KN5,    KO5,    KP5,    KC_NO,  KC_NO }, \
+        /* 6 */  { KC_NO,  KC_NO,  KC6,    KC_NO,  KC_NO,  KF6,    KG6,    KC_NO,  KI6,    KJ6,    KK6,    KL6,    KC_NO,  KN6,    KO6,    KC_NO,  KQ6,    KC_NO }, \
+        /* 7 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KF7,    KG7,    KH7,    KI7,    KJ7,    KK7,    KL7,    KK7,    KL7,    KO7,    KP7,    KC_NO,  KC_NO }  \
 }
 
 inline void ph_caps_led_on(void)  { DDRC |=  (1<<6); PORTC &= ~(1<<6); }
@@ -79,5 +78,3 @@ inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); }
 inline void ph_sclk_led_on(void)  { DDRC |=  (1<<5); PORTC &= ~(1<<5); }
 inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); }
 
-
-#endif
diff --git a/keyboards/bpiphany/pegasushoof/2013/config.h b/keyboards/bpiphany/pegasushoof/2013/config.h
new file mode 100644
index 0000000000..d2f81fedc3
--- /dev/null
+++ b/keyboards/bpiphany/pegasushoof/2013/config.h
@@ -0,0 +1,37 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Filco
+#define PRODUCT         Majestouch TKL \\w The Pegasus Hoof 2013
+#define DESCRIPTION     QMK firmware for Majestouch TKL
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
diff --git a/keyboards/bpiphany/pegasushoof/matrix.c b/keyboards/bpiphany/pegasushoof/2013/matrix.c
index a670d53823..a670d53823 100644
--- a/keyboards/bpiphany/pegasushoof/matrix.c
+++ b/keyboards/bpiphany/pegasushoof/2013/matrix.c
diff --git a/keyboards/bpiphany/pegasushoof/2013/rules.mk b/keyboards/bpiphany/pegasushoof/2013/rules.mk
new file mode 100644
index 0000000000..3215e3588a
--- /dev/null
+++ b/keyboards/bpiphany/pegasushoof/2013/rules.mk
@@ -0,0 +1,2 @@
+CUSTOM_MATRIX = yes
+SRC = matrix.c
diff --git a/keyboards/bpiphany/pegasushoof/2015/2015.c b/keyboards/bpiphany/pegasushoof/2015/2015.c
new file mode 100644
index 0000000000..62841e7af1
--- /dev/null
+++ b/keyboards/bpiphany/pegasushoof/2015/2015.c
@@ -0,0 +1,58 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "2015.h"
+
+
+extern inline void ph_caps_led_on(void);
+extern inline void ph_caps_led_off(void);
+
+extern inline void ph_sclk_led_on(void);
+extern inline void ph_sclk_led_off(void);
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+};
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+bool process_action_user(keyrecord_t *record) {
+    return true;
+}
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+}
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	matrix_scan_user();
+}
+
+bool process_action_kb(keyrecord_t *record) {
+	return process_action_user(record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	led_set_user(usb_led);
+}
diff --git a/keyboards/bpiphany/pegasushoof/2015/2015.h b/keyboards/bpiphany/pegasushoof/2015/2015.h
new file mode 100644
index 0000000000..18bfc46b81
--- /dev/null
+++ b/keyboards/bpiphany/pegasushoof/2015/2015.h
@@ -0,0 +1,82 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "matrix.h"
+#include "quantum.h"
+
+#define  ___ XXXXXXX
+
+#define LAYOUT( \
+    KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5, \
+    KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4, \
+    KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7, \
+    KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                  \
+    KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,      \
+    KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0  \
+    ) { /*         00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+        /* 0 */  { ___ , KB0 , KC0 , KD0 , ___ , KF0 , KG0 , ___ , ___ , ___ , KK0 , KL0 , ___ , ___ , KO0 , ___ , ___ , KR0 }, \
+        /* 1 */  { KA1 , KB1 , ___ , KD1 , KE1 , KF1 , KG1 , KH1 , KI1 , KJ1 , ___ , ___ , ___ , ___ , ___ , ___ , ___ , ___ }, \
+        /* 2 */  { ___ , KB2 , ___ , KD2 , KE2 , KF2 , KG2 , KH2 , KI2 , KJ2 , ___ , ___ , ___ , KN2 , ___ , KP2 , ___ , KR2 }, \
+        /* 3 */  { ___ , KB3 , ___ , KD3 , KE3 , KF3 , KG3 , KH3 , KI3 , KJ3 , ___ , ___ , KM3 , KN3 , ___ , ___ , ___ , KR3 }, \
+        /* 4 */  { KA4 , KB4 , ___ , KD4 , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , ___ , ___ , KO4 , ___ , KQ4 , KR4 }, \
+        /* 5 */  { KA5 , ___ , KC5 , KD5 , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , ___ , ___ , ___ , ___ , ___ , ___ , ___ , KR5 }, \
+        /* 6 */  { ___ , KB6 , KC6 , ___ , KE6 , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , ___ , ___ , ___ , KO6 , ___ , ___ , KR6 }, \
+        /* 7 */  { KA7 , KB7 , KC7 , KD7 , KE7 , KF7 , KG7 , KH7 , KI7 , KJ7 , ___ , ___ , ___ , ___ , KO7 , ___ , KQ7 , KR7 }  \
+    }
+
+#define LAYOUT_tkl_ansi( \
+    KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5, \
+    KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4, \
+    KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7, \
+    KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                  \
+    KN2,      KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,      \
+    KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0  \
+    ) LAYOUT( \
+        KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5, \
+        KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4, \
+        KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7, \
+        KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                  \
+        KN2,KC_NO,KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,      \
+        KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0  \
+    )
+
+#define LAYOUT_tkl_jis( \
+    KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,        KC7, KC5, KA5, \
+    KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB5, KB2,   KL4, KO4, KQ4, \
+    KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2,             KK4, KO7, KQ7, \
+    KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB3, KB1,                       \
+    KN2,      KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KE0, KN3,             KO6,      \
+    KA4, KP2, KC6, KJ0,           KK6,           KI0, KH0, KC0, KD0, KA1,        KO0, KK0, KL0  \
+    ) { /*         00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+        /* 0 */  { ___ , KB0 , KC0 , KD0 , KE0 , KF0 , KG0 , KH0 , KI0 , KJ0 , KK0 , KL0 , ___ , ___ , KO0 , ___ , ___ , KR0 }, \
+        /* 1 */  { KA1 , KB1 , ___ , KD1 , KE1 , KF1 , KG1 , KH1 , KI1 , KJ1 , ___ , ___ , ___ , ___ , ___ , ___ , ___ ,     }, \
+        /* 2 */  { ___ , KB2 , ___ , KD2 , KE2 , KF2 , KG2 , KH2 , KI2 , KJ2 , ___ , ___ , ___ , KN2 , ___ , KP2 , ___ , KR2 }, \
+        /* 3 */  { ___ , KB3 , ___ , KD3 , KE3 , KF3 , KG3 , KH3 , KI3 , KJ3 , ___ , ___ , ___ , KN3 , ___ , ___ , ___ , KR3 }, \
+        /* 4 */  { KA4 , KB4 , ___ , KD4 , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , ___ , ___ , KO4 , ___ , KQ4 , KR4 }, \
+        /* 5 */  { KA5 , KB5 , KC5 , KD5 , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , ___ , ___ , ___ , ___ , ___ , ___ , ___ , KR5 }, \
+        /* 6 */  { ___ , KB6 , KC6 , ___ , KE6 , KF6 , KG6 , KH6 , ___ , KJ6 , KK6 , ___ , ___ , ___ , KO6 , ___ , ___ , KR6 }, \
+        /* 7 */  { KA7 , KB7 , KC7 , KD7 , KE7 , KF7 , KG7 , KH7 , KI7 , KJ7 , ___ , ___ , ___ , ___ , KO7 , ___ , KQ7 , KR7 }  \
+}
+
+inline void ph_caps_led_on(void)  { DDRC |=  (1<<6); PORTC &= ~(1<<6); }
+inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); }
+
+inline void ph_sclk_led_on(void)  { DDRC |=  (1<<5); PORTC &= ~(1<<5); }
+inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); }
+
diff --git a/keyboards/bpiphany/pegasushoof/2015/config.h b/keyboards/bpiphany/pegasushoof/2015/config.h
new file mode 100644
index 0000000000..6edfa59930
--- /dev/null
+++ b/keyboards/bpiphany/pegasushoof/2015/config.h
@@ -0,0 +1,38 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Filco
+#define PRODUCT         Majestouch TKL \\w The Pegasus Hoof 2015
+#define DESCRIPTION     QMK firmware for Majestouch TKL
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
diff --git a/keyboards/bpiphany/pegasushoof/2015/matrix.c b/keyboards/bpiphany/pegasushoof/2015/matrix.c
new file mode 100644
index 0000000000..db03993544
--- /dev/null
+++ b/keyboards/bpiphany/pegasushoof/2015/matrix.c
@@ -0,0 +1,146 @@
+/*
+  Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+  Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void select_row(uint8_t col);
+
+inline uint8_t matrix_rows(void)
+{
+  return MATRIX_ROWS;
+}
+
+inline uint8_t matrix_cols(void)
+{
+  return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+  /* Column output pins */
+  DDRD  |=  0b01111011;
+  /* Row input pins */
+  DDRC  &= ~0b10000000;
+  DDRB  &= ~0b01111111;
+  PORTC |=  0b10000000;
+  PORTB |=  0b01111111;
+
+  for (uint8_t i=0; i < matrix_rows(); i++)  {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+
+  matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+  bool changed = false;
+  for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+    select_row(col);
+    wait_us(30);
+    matrix_row_t rows = read_cols();
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+      bool curr_bit = rows & (1<<row);
+      if ((changed |= prev_bit != curr_bit)) {
+	    matrix_debouncing[row] ^= (matrix_row_t) 1 << col;
+      }
+    }
+  }
+
+  debounce(matrix_debouncing, matrix, matrix_rows(), changed);
+  matrix_scan_quantum();
+
+  return (uint8_t)changed;
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+  return matrix[row];
+}
+
+void matrix_print(void)
+{
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < matrix_rows(); row++) {
+    phex(row); print(": ");
+    pbin_reverse16(matrix_get_row(row));
+    print("\n");
+  }
+}
+
+uint8_t matrix_key_count(void)
+{
+  uint8_t count = 0;
+  for (uint8_t i = 0; i < matrix_rows(); i++) {
+    count += bitpop16(matrix_get_row(i));
+  }
+  return count;
+}
+
+static matrix_row_t read_cols(void)
+{
+  return
+    (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<0)) |
+    (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<1)) |
+    (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) |
+    (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) |
+    (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) |
+    (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) |
+    (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) |
+    (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7));
+}
+
+static void select_row(uint8_t col)
+{
+  switch (col) {
+  case  0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break;
+  case  1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break;
+  case  2: PORTD = (PORTD & ~0b01111011) | 0b01100000; break;
+  case  3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break;
+  case  4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break;
+  case  5: PORTD = (PORTD & ~0b01111011) | 0b01101010; break;
+  case  6: PORTD = (PORTD & ~0b01111011) | 0b01110001; break;
+  case  7: PORTD = (PORTD & ~0b01111011) | 0b01101001; break;
+  case  8: PORTD = (PORTD & ~0b01111011) | 0b01100001; break;
+  case  9: PORTD = (PORTD & ~0b01111011) | 0b01111000; break;
+  case 10: PORTD = (PORTD & ~0b01111011) | 0b00100011; break;
+  case 11: PORTD = (PORTD & ~0b01111011) | 0b00101011; break;
+  case 12: PORTD = (PORTD & ~0b01111011) | 0b00110011; break;
+  case 13: PORTD = (PORTD & ~0b01111011) | 0b01110000; break;
+  case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break;
+  case 15: PORTD = (PORTD & ~0b01111011) | 0b01101000; break;
+  case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break;
+  case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break;
+  }
+}
diff --git a/keyboards/bpiphany/pegasushoof/2015/rules.mk b/keyboards/bpiphany/pegasushoof/2015/rules.mk
new file mode 100644
index 0000000000..3215e3588a
--- /dev/null
+++ b/keyboards/bpiphany/pegasushoof/2015/rules.mk
@@ -0,0 +1,2 @@
+CUSTOM_MATRIX = yes
+SRC = matrix.c
diff --git a/keyboards/bpiphany/pegasushoof/config.h b/keyboards/bpiphany/pegasushoof/config.h
index cd89b7582a..6868dc1354 100644
--- a/keyboards/bpiphany/pegasushoof/config.h
+++ b/keyboards/bpiphany/pegasushoof/config.h
@@ -1,5 +1,5 @@
 /*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,27 +15,6 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6050
-#define DEVICE_VER      0x0104
-#define MANUFACTURER    Filco
-#define PRODUCT         Majestouch TKL \\w The Pegasus Hoof
-#define DESCRIPTION     QMK firmware for Majestouch TKL
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 18
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-#endif
diff --git a/keyboards/bpiphany/pegasushoof/info.json b/keyboards/bpiphany/pegasushoof/info.json
index c4fa28ac46..0fb9f4a746 100644
--- a/keyboards/bpiphany/pegasushoof/info.json
+++ b/keyboards/bpiphany/pegasushoof/info.json
@@ -187,6 +187,101 @@
         {"label":"Down", "x":16.25, "y":5.5},
         {"label":"Right", "x":17.25, "y":5.5}
       ]
+    },
+    "LAYOUT_tkl_jis": {
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"F1", "x":2, "y":0},
+        {"label":"F2", "x":3, "y":0},
+        {"label":"F3", "x":4, "y":0},
+        {"label":"F4", "x":5, "y":0},
+        {"label":"F5", "x":6.5, "y":0},
+        {"label":"F6", "x":7.5, "y":0},
+        {"label":"F7", "x":8.5, "y":0},
+        {"label":"F8", "x":9.5, "y":0},
+        {"label":"F9", "x":11, "y":0},
+        {"label":"F10", "x":12, "y":0},
+        {"label":"F11", "x":13, "y":0},
+        {"label":"F12", "x":14, "y":0},
+        {"label":"Print Screen", "x":15.25, "y":0},
+        {"label":"Scroll Lock", "x":16.25, "y":0},
+        {"label":"Pause", "x":17.25, "y":0},
+        {"label":"Half-width/Full-width", "x":0, "y":1.5},
+        {"label":"1", "x":1, "y":1.5},
+        {"label":"2", "x":2, "y":1.5},
+        {"label":"3", "x":3, "y":1.5},
+        {"label":"4", "x":4, "y":1.5},
+        {"label":"5", "x":5, "y":1.5},
+        {"label":"6", "x":6, "y":1.5},
+        {"label":"7", "x":7, "y":1.5},
+        {"label":"8", "x":8, "y":1.5},
+        {"label":"9", "x":9, "y":1.5},
+        {"label":"0", "x":10, "y":1.5},
+        {"label":"-", "x":11, "y":1.5},
+        {"label":"^", "x":12, "y":1.5},
+        {"label":"Yen", "x":13, "y":1.5},
+        {"label":"Backspace", "x":14, "y":1.5},
+        {"label":"Insert", "x":15.25, "y":1.5},
+        {"label":"Home", "x":16.25, "y":1.5},
+        {"label":"Page Up", "x":17.25, "y":1.5},
+        {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2.5},
+        {"label":"W", "x":2.5, "y":2.5},
+        {"label":"E", "x":3.5, "y":2.5},
+        {"label":"R", "x":4.5, "y":2.5},
+        {"label":"T", "x":5.5, "y":2.5},
+        {"label":"Y", "x":6.5, "y":2.5},
+        {"label":"U", "x":7.5, "y":2.5},
+        {"label":"I", "x":8.5, "y":2.5},
+        {"label":"O", "x":9.5, "y":2.5},
+        {"label":"P", "x":10.5, "y":2.5},
+        {"label":"@", "x":11.5, "y":2.5},
+        {"label":"[", "x":12.5, "y":2.5},
+        {"label":"Del", "x":15.25, "y":2.5},
+        {"label":"End", "x":16.25, "y":2.5},
+        {"label":"Page Down", "x":17.25, "y":2.5},
+        {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+        {"label":"A", "x":1.75, "y":3.5},
+        {"label":"S", "x":2.75, "y":3.5},
+        {"label":"D", "x":3.75, "y":3.5},
+        {"label":"F", "x":4.75, "y":3.5},
+        {"label":"G", "x":5.75, "y":3.5},
+        {"label":"H", "x":6.75, "y":3.5},
+        {"label":"J", "x":7.75, "y":3.5},
+        {"label":"K", "x":8.75, "y":3.5},
+        {"label":"L", "x":9.75, "y":3.5},
+        {"label":";", "x":10.75, "y":3.5},
+        {"label":":", "x":11.75, "y":3.5},
+        {"label":"]", "x":12.75, "y":3.5},
+        {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
+        {"label":"Shift", "x":0, "y":4.5, "w":2.25},
+        {"label":"Z", "x":2.25, "y":4.5},
+        {"label":"X", "x":3.25, "y":4.5},
+        {"label":"C", "x":4.25, "y":4.5},
+        {"label":"V", "x":5.25, "y":4.5},
+        {"label":"B", "x":6.25, "y":4.5},
+        {"label":"N", "x":7.25, "y":4.5},
+        {"label":"M", "x":8.25, "y":4.5},
+        {"label":",", "x":9.25, "y":4.5},
+        {"label":".", "x":10.25, "y":4.5},
+        {"label":"/", "x":11.25, "y":4.5},
+        {"label":"\\", "x":12.25, "y":4.5},
+        {"label":"Shift", "x":13.25, "y":4.5, "w":1.75},
+        {"label":"Up", "x":16.25, "y":4.5},
+        {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+        {"label":"GUI", "x":1.25, "y":5.5},
+        {"label":"Alt", "x":2.25, "y":5.5, "w":1.25},
+        {"label":"Muhenkan", "x":3.5, "y":5.5},
+        {"label":"Space", "x":4.5, "y":5.5, "w":4.5},
+        {"label":"Henkan", "x":9, "y":5.5, "w":1.25},
+        {"label":"Kana", "x":10.25, "y":5.5, "w":1.25},
+        {"label":"Alt", "x":11.5, "y":5.5, "w":1.25},
+        {"label":"Fn", "x":12.75, "y":5.5},
+        {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+        {"label":"Left", "x":15.25, "y":5.5},
+        {"label":"Down", "x":16.25, "y":5.5},
+        {"label":"Right", "x":17.25, "y":5.5}
+      ]
     }
   }
 }
diff --git a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c
index 7db7e5d39e..aad2d643cd 100644
--- a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c
+++ b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c
@@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TAB,  SE_AO,  SE_AE,  SE_OE,  KC_P,   KC_Y,   KC_F,   KC_G,   KC_C,   KC_R,   KC_L,   KC_COMM,SE_CIRC,SE_QUOT,   KC_DEL, KC_END, KC_PGDN, \
 		KC_LCTRL,KC_A,   KC_O,   KC_E,   KC_U,   KC_I,   KC_H,   KC_D,   KC_T,   KC_N,   KC_S,   SE_MINS,        KC_ENT,                             \
 		KC_LSFT, SE_LTGT,KC_DOT, KC_Q,   KC_J,   KC_K,   KC_B,   KC_X,   KC_M,   KC_W,   KC_V,   KC_Z,           KC_RSFT,           KC_UP,           \
-		KC_FN0,  KC_LGUI,KC_LALT,                       KC_SPC,                          KC_RALT,KC_RGUI,KC_MENU,KC_FN1,    KC_LEFT,KC_DOWN,KC_RGHT),
+		MO(KM_MEDIA),KC_LGUI,KC_LALT,                   KC_SPC,                          KC_RALT,KC_RGUI,KC_MENU,KC_FN1,    KC_LEFT,KC_DOWN,KC_RGHT),
 	/* Layer 1: Standard ISO layer */
 	[KM_QWERTY] = LAYOUT( \
 		KC_ESC,          KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,    KC_PSCR,KC_SLCK,KC_PAUS, \
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   SE_AO,  SE_CIRC,SE_QUOT,   KC_DEL, KC_END, KC_PGDN, \
 		KC_LCTRL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   SE_OE,  SE_AE,          KC_ENT,                             \
 		KC_LSFT, SE_LTGT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, SE_MINS,        KC_RSFT,           KC_UP,           \
-		KC_FN0,  KC_LGUI,KC_LALT,                       KC_SPC,                          KC_RALT,KC_RGUI,KC_MENU,KC_FN1,    KC_LEFT,KC_DOWN,KC_RGHT),
+		MO(KM_MEDIA),KC_LGUI,KC_LALT,                   KC_SPC,                          KC_RALT,KC_RGUI,KC_MENU,KC_FN1,    KC_LEFT,KC_DOWN,KC_RGHT),
 	/* Layer 2: Media layer */
 	[KM_MEDIA] = LAYOUT( \
 		_______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   KC_WAKE,KC_PWR, KC_SLEP, \
@@ -76,7 +76,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_LAYER_MOMENTARY(KM_MEDIA),
 	[1] = ACTION_LAYER_TOGGLE(KM_QWERTY)
 };
 
diff --git a/keyboards/bpiphany/pegasushoof/readme.md b/keyboards/bpiphany/pegasushoof/readme.md
index 10ec79300a..ab49db03c4 100644
--- a/keyboards/bpiphany/pegasushoof/readme.md
+++ b/keyboards/bpiphany/pegasushoof/readme.md
@@ -3,7 +3,7 @@
 A replacement controller that turns your Filco Majestouch 87/88 mechanical keyboard into a fully programmable keyboard.
 
 Keyboard Maintainer: QMK Community  
-Hardware Supported: Pegasus Hoof  
+Hardware Supported: Pegasus Hoof, revisions [20131001](2013/) and [20150108](2015/)  
 Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/filco-pegasus-hoof-controller/)
 
 Make example for this keyboard (after setting up your build environment):
@@ -11,3 +11,11 @@ Make example for this keyboard (after setting up your build environment):
     make bpiphany/pegasus_hoof:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+### Additional Resources
+
+With many thanks to Bathroom Epiphanies for all the kind advice and help.
+
+ * [Schematic](https://deskthority.net/wiki/Costar_replacement_controllers#Schematic)
+ * [bpiphany TMK source](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard)
+ * [bpiphany QMK source](https://github.com/BathroomEpiphanies/epiphanies_qmk_keyboard)
diff --git a/keyboards/bpiphany/pegasushoof/rules.mk b/keyboards/bpiphany/pegasushoof/rules.mk
index 00e4bb0ea1..0910feb61b 100644
--- a/keyboards/bpiphany/pegasushoof/rules.mk
+++ b/keyboards/bpiphany/pegasushoof/rules.mk
@@ -1,50 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
@@ -64,5 +29,4 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 
 LAYOUTS = tkl_ansi
 
-CUSTOM_MATRIX = yes
-SRC = matrix.c
+DEFAULT_FOLDER=bpiphany/pegasushoof/2013
diff --git a/keyboards/bpiphany/sixshooter/rules.mk b/keyboards/bpiphany/sixshooter/rules.mk
index 5bf8d21650..ad76051eb2 100644
--- a/keyboards/bpiphany/sixshooter/rules.mk
+++ b/keyboards/bpiphany/sixshooter/rules.mk
@@ -1,49 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = halfkay
 
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/bpiphany/tiger_lily/rules.mk b/keyboards/bpiphany/tiger_lily/rules.mk
index 8f07bb006e..edd3ab6a4a 100644
--- a/keyboards/bpiphany/tiger_lily/rules.mk
+++ b/keyboards/bpiphany/tiger_lily/rules.mk
@@ -1,52 +1,15 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u2
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
diff --git a/keyboards/bpiphany/unloved_bastard/info.json b/keyboards/bpiphany/unloved_bastard/info.json
index efa995088b..b0e3346e07 100644
--- a/keyboards/bpiphany/unloved_bastard/info.json
+++ b/keyboards/bpiphany/unloved_bastard/info.json
@@ -9,6 +9,9 @@
     "LAYOUT": {
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
     },
+    "LAYOUT_tkl_iso": {
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+    },
     "LAYOUT_tkl_ansi": {
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
     }
diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c b/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c
index 0576cb2422..3c23088357 100644
--- a/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c
+++ b/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c
@@ -25,22 +25,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                  KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, KC_APP,  KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT  )
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-
 void matrix_init_user(void) {
 
 }
diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c
index afae406b1e..783e37196e 100644
--- a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c
+++ b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c
@@ -25,22 +25,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                  KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, KC_APP,  KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT  )
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-
 void matrix_init_user(void) {
 
 }
diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/config.h b/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/config.h
new file mode 100644
index 0000000000..c55f7f9f7d
--- /dev/null
+++ b/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/keymap.c b/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/keymap.c
new file mode 100644
index 0000000000..b6b78c2c5a
--- /dev/null
+++ b/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/keymap.c
@@ -0,0 +1,42 @@
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_tkl_iso(\
+                 KC_ESC, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \
+                 KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP, \
+                 KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,            KC_DEL,  KC_END,  KC_PGDN, \
+                 KC_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT, \
+                 KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,          KC_RSFT,            KC_UP, \
+                 KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, KC_APP,  KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT  )
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/readme.md b/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/readme.md
new file mode 100644
index 0000000000..40fae94480
--- /dev/null
+++ b/keyboards/bpiphany/unloved_bastard/keymaps/default_iso/readme.md
@@ -0,0 +1,3 @@
+# default_iso
+
+A standard tenkeyless ISO-layout keymap for Unloved Bastard-powered keyboards.
diff --git a/keyboards/bpiphany/unloved_bastard/rules.mk b/keyboards/bpiphany/unloved_bastard/rules.mk
index 2db321c573..65123020f3 100644
--- a/keyboards/bpiphany/unloved_bastard/rules.mk
+++ b/keyboards/bpiphany/unloved_bastard/rules.mk
@@ -1,52 +1,15 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u2
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
@@ -70,4 +33,4 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = yes
 SRC += matrix.c
 
-LAYOUTS = tkl_ansi
+LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/bpiphany/unloved_bastard/unloved_bastard.h b/keyboards/bpiphany/unloved_bastard/unloved_bastard.h
index 9eaf587d7a..0223e7233d 100644
--- a/keyboards/bpiphany/unloved_bastard/unloved_bastard.h
+++ b/keyboards/bpiphany/unloved_bastard/unloved_bastard.h
@@ -1,4 +1,4 @@
-/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,7 +18,7 @@
 
 #include "quantum.h"
 
-#define LAYOUT( \
+#define LAYOUT_all( \
   KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,   KN5, KN7, KP7, \
   KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2,   KR4, KC4, KE4, \
   KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3,   KQ4, KC5, KE5, \
@@ -47,17 +47,32 @@
   KB2,      KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0,      KB3,        KC6,      \
   KP4, KN2, KN6,                KQ6,                KN0, KN3, KM0, KP1,   KC0, KQ0, KR0  \
 ) \
-{ \
-/* Columns and rows need to be swapped in the below definition */ \
-/*          A       B       C       D       E       F       G       H       I       J       K       L       M       N       O       P       Q       R       */ \
-/* 0 */ {   KC_NO,  KC_NO,  KC0,    KC_NO,  KC_NO,  KF0,    KC_NO,  KC_NO,  KC_NO,  KJ0,  KK0,  KC_NO, KM0,  KN0,    KO0,    KC_NO,  KQ0,    KR0     }, \
-/* 1 */ {   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KG1,    KH1,    KI1,    KJ1,    KK1,  KL1,   KM1,  KC_NO,  KO1,    KP1,    KC_NO,  KC_NO   }, \
-/* 2 */ {   KC_NO,  KB2,    KC_NO,  KC_NO,  KC_NO,  KF2,    KG2,    KH2,    KI2,    KJ2,    KK2,  KL2,   KM2,  KN2,    KO2,    KC_NO,  KC_NO,  KC_NO   }, \
-/* 3 */ {   KC_NO,  KB3,    KC_NO,  KC_NO,  KC_NO,  KF3,    KG3,    KH3,    KI3,    KJ3,    KK3,  KL3,   KM3,  KN3,    KO3,    KC_NO,  KC_NO,  KC_NO   }, \
-/* 4 */ {   KC_NO,  KC_NO,  KC4,    KC_NO,  KE4,    KF4,    KG4,    KH4,    KI4,    KJ4,    KK4,  KL4,   KM4,  KC_NO,  KO4,    KP4,    KQ4,    KR4     }, \
-/* 5 */ {   KC_NO,  KC_NO,  KC5,    KC_NO,  KE5,    KF5,    KG5,    KH5,    KI5,    KJ5,    KK5,  KL5,   KM5,  KN5,    KO5,    KP5,    KC_NO,  KC_NO   }, \
-/* 6 */ {   KC_NO,  KC_NO,  KC6,    KC_NO,  KC_NO,  KF6,    KG6,    KC_NO,  KI6,    KJ6,    KK6,  KL6,   KC_NO,KN6,    KO6,    KC_NO,  KQ6,    KC_NO   }, \
-/* 7 */ {   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KF7,    KG7,    KH7,    KI7,    KJ7,    KK7,  KL7,   KM7,  KN7,    KC_NO,  KP7,    KC_NO,  KC_NO   }  \
-}
+LAYOUT_all( \
+  KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,   KN5, KN7, KP7, \
+  KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2,   KR4, KC4, KE4, \
+  KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3,   KQ4, KC5, KE5, \
+  KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6,      KO1,                  \
+  KB2,KC_NO,KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0,      KB3,        KC6,      \
+  KP4, KN2, KN6,                KQ6,                KN0, KN3, KM0, KP1,   KC0, KQ0, KR0  \
+)
+
+#define LAYOUT_tkl_iso( \
+  KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,   KN5, KN7, KP7, \
+  KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2,   KR4, KC4, KE4, \
+  KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2,        KQ4, KC5, KE5, \
+  KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO3, KO1,                  \
+  KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0,      KB3,        KC6,      \
+  KP4, KN2, KN6,                KQ6,                KN0, KN3, KM0, KP1,   KC0, KQ0, KR0  \
+) \
+LAYOUT_all( \
+  KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,   KN5, KN7, KP7, \
+  KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2,   KR4, KC4, KE4, \
+  KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3,   KQ4, KC5, KE5, \
+  KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6,      KO1,                  \
+  KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0,      KB3,        KC6,      \
+  KP4, KN2, KN6,                KQ6,                KN0, KN3, KM0, KP1,   KC0, KQ0, KR0  \
+)
+
+#define LAYOUT LAYOUT_all
 
 #endif