Merge remote-tracking branch 'origin/master' into develop

11 files changed, 1028 insertions, 0 deletions

diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/config.h b/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/config.h
new file mode 100644
index 0000000000..b2e49c8c6e
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/config.h
@@ -0,0 +1,153 @@
+/**
+ * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifdef VIA_ENABLE
+/* Via configuration. */
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 8
+#endif // VIA_ENABLE
+
+/**
+ * Configure the global tapping term (default: 200ms).
+ * If you have a lot of accidental mod activations, crank up the tapping term.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
+ */
+#ifndef TAPPING_TERM
+#    define TAPPING_TERM 160
+#endif // TAPPING_TERM
+
+// disable trackpad taps
+// #define CIRQUE_PINNACLE_TAPPING_TERM 0
+
+/**
+ * Enable rapid switch from tap to hold.  Disable auto-repeat when pressing key
+ * twice, except for one-shot keys.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
+ */
+#define TAPPING_FORCE_HOLD
+
+/*
+ * Tap-or-Hold decision modes.
+ *
+ * Note that the following flags behave differently when combined (ie. when 2 or
+ * more are enabled).
+ *
+ * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
+ * decision modes.
+ */
+
+/**
+ * Faster tap-hold trigger.
+ *
+ * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
+ * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
+ */
+#define PERMISSIVE_HOLD
+
+/**
+ * Prevent normal rollover on alphas from accidentally triggering mods.
+ *
+ * Ignores key presses that interrupt a mod-tap.  Must-have for Home Row mod.
+ *
+ * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
+ * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
+ */
+#define IGNORE_MOD_TAP_INTERRUPT
+
+/** Dilemma-specific features. */
+
+#ifdef POINTING_DEVICE_ENABLE
+// Flip horizontal direction for drag-scroll.
+#    define DILEMMA_DRAGSCROLL_REVERSE_X
+// #define DILEMMA_DRAGSCROLL_REVERSE_Y
+#endif // POINTING_DEVICE_ENABLE
+
+/** RGB Matrix. */
+
+#ifdef RGB_MATRIX_ENABLE
+// Enable all animations on ARM boards since they have plenty of memory
+// available for it.
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+// Limit maximum brightness to keep power consumption reasonable, and avoid
+// disconnects.
+#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
+
+// Rainbow swirl as startup mode.
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+// Slow swirl at startup.
+#    define RGB_MATRIX_STARTUP_SPD 32
+
+// Startup values.
+#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
+#endif // RGB_MATRIX_ENABLE
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/keymap.c b/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/keymap.c
new file mode 100644
index 0000000000..e8c0441d7b
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/keymap.c
@@ -0,0 +1,224 @@
+/**
+ * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum bstiq_layers {
+    LAYER_BASE = 0,
+    LAYER_MBO,
+    LAYER_MEDIA,
+    LAYER_NAV,
+    LAYER_MOUSE,
+    LAYER_SYM,
+    LAYER_NUM,
+    LAYER_FUN,
+};
+
+// Automatically enable sniping when the mouse layer is on.
+#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_MOUSE
+
+#define BSP_NAV LT(LAYER_NAV, KC_BSPC)
+#define ENT_MBO LT(LAYER_MBO, KC_ENT)
+#define TAB_MED LT(LAYER_MEDIA, KC_TAB)
+#define ESC_SYM LT(LAYER_SYM, KC_ESC)
+#define SPC_NUM LT(LAYER_NUM, KC_SPC)
+#define SPC_MBO LT(LAYER_MBO, KC_SPC)
+#define MOUSE(KC) LT(LAYER_MOUSE, KC)
+
+#define USR_RDO KC_AGAIN
+#define USR_PST S(KC_INS)
+#define USR_CPY C(KC_INS)
+#define USR_CUT S(KC_DEL)
+#define USR_UND KC_UNDO
+
+#define MS_L KC_MS_LEFT
+#define MS_R KC_MS_RIGHT
+#define MS_D KC_MS_DOWN
+#define MS_U KC_MS_UP
+
+#define WH_L KC_MS_WH_LEFT
+#define WH_R KC_MS_WH_RIGHT
+#define WH_D KC_MS_WH_DOWN
+#define WH_U KC_MS_WH_UP
+
+// clang-format off
+/** Convenience macro. */
+#define _KC_LAYOUT_wrapper(                                                                             \
+         k00,      k01,      k02,      k03,      k04,      k05,      k06,      k07,      k08,      k09, \
+         k10,      k11,      k12,      k13,      k14,      k15,      k16,      k17,      k18,      k19, \
+         k20,      k21,      k22,      k23,      k24,      k25,      k26,      k27,      k28,      k29, \
+         ...)                                                                                           \
+    KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, \
+    KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, \
+    KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, \
+    __VA_ARGS__
+#define KC_LAYOUT_wrapper(...) _KC_LAYOUT_wrapper(__VA_ARGS__)
+
+/** Base layer with BÉPO layout. */
+#define LAYOUT_LAYER_BASE_BEPO KC_LAYOUT_wrapper(               \
+       B,    W,    P,    O, QUOT,  DOT,    V,    D,    L,    J, \
+       A,    U,    I,    E, COMM,    C,    T,    S,    R,    N, \
+       Z,    Y,    X, SLSH,    K,    M,    Q,    G,    H,    F, \
+                SPC_MBO, TAB_MED,    ESC_SYM, SPC_NUM)
+
+/** Convenience key shorthands. */
+#define U_NA KC_NO // Present but not available for use.
+#define U_NU KC_NO // Available but not used.
+
+/** Convenience row shorthands. */
+#define ________________HOME_ROW_NA________________    U_NA,    U_NA,    U_NA,    U_NA,    U_NA
+#define ______________HOME_ROW_GASC_L______________ KC_LGUI, KC_LALT, KC_LSFT, KC_LCTL,    U_NA
+#define ______________HOME_ROW_ALGR_L______________    U_NA, KC_ALGR,    U_NA,    U_NA,    U_NA
+#define ______________HOME_ROW_GASC_R______________    U_NA, KC_LCTL, KC_LSFT, KC_LALT, KC_LGUI
+#define ______________HOME_ROW_ALGR_R______________    U_NA,    U_NA,    U_NA, KC_ALGR,    U_NA
+
+/** Layers. */
+
+// Buttons.
+#define LAYOUT_LAYER_MBO                                                                      \
+    ________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
+    ______________HOME_ROW_GASC_L______________, KC_BSPC, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT, \
+    KC_BTN3, KC_ALGR, KC_BTN2, KC_BTN1,    U_NA,  KC_DEL, KC_HOME, KC_PGDN, KC_PGUP,  KC_END, \
+                                  U_NA,    U_NA,  KC_ENT,  KC_ENT
+
+// Media.
+#define LAYOUT_LAYER_MEDIA                                                                    \
+    ________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
+    ______________HOME_ROW_GASC_L______________,    U_NU,    MS_L,    MS_D,    MS_U,    MS_R, \
+    ______________HOME_ROW_ALGR_L______________,    U_NU,    WH_L,    WH_D,    WH_U,    WH_R, \
+                                  U_NA,    U_NA, KC_BTN1, KC_BTN3
+
+// Navigation.
+#define LAYOUT_LAYER_NAV                                                                      \
+    ________________HOME_ROW_NA________________, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, \
+    ______________HOME_ROW_GASC_L______________,    U_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, \
+    ______________HOME_ROW_ALGR_L______________,    U_NU,    U_NU,    U_NU,    U_NU,    U_NU, \
+                                  U_NA,    U_NA, KC_MSTP, KC_MPLY
+
+// Mouse.
+#define LAYOUT_LAYER_MOUSE                                                                    \
+    S_D_MOD, USR_PST, USR_CPY, USR_CUT, USR_UND, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
+    DPI_MOD, DRGSCRL, KC_LSFT, DRGSCRL, _______,    U_NU,    MS_L,    MS_D,    MS_U,    MS_R, \
+    USR_RDO, USR_PST, USR_CPY, KC_BTN3, USR_UND,    U_NU,    WH_L,    WH_D,    WH_U,    WH_R, \
+                               KC_BTN1, KC_BTN2, KC_BTN1, KC_BTN3
+
+// Symbols.
+#define LAYOUT_LAYER_SYM                                                                      \
+    KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, ________________HOME_ROW_NA________________, \
+    KC_COLN,  KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GASC_R______________, \
+    KC_TILD, KC_EXLM,   KC_AT, KC_HASH, KC_MINS, ______________HOME_ROW_ALGR_R______________, \
+                               KC_RPRN, KC_LPRN,    U_NA,    U_NA
+
+// Numerals.
+#define LAYOUT_LAYER_NUM                                                                      \
+    KC_LBRC,    KC_7,    KC_8,    KC_9, KC_RBRC, ________________HOME_ROW_NA________________, \
+    KC_SCLN,    KC_4,    KC_5,    KC_6,  KC_EQL, ______________HOME_ROW_GASC_R______________, \
+     KC_GRV,    KC_1,    KC_2,    KC_3, KC_UNDS, ______________HOME_ROW_ALGR_R______________, \
+                                  KC_0, KC_MINS,    U_NA,    U_NA
+
+// Function keys.
+#define LAYOUT_LAYER_FUN                                                                      \
+     KC_F12,   KC_F7,   KC_F8,   KC_F9, KC_PSCR, ________________HOME_ROW_NA________________, \
+     KC_F11,   KC_F4,   KC_F5,   KC_F6, KC_SCRL, ______________HOME_ROW_GASC_R______________, \
+     KC_F10,   KC_F1,   KC_F2,   KC_F3, KC_PAUS, ______________HOME_ROW_ALGR_R______________,\
+                                KC_APP,  KC_TAB,    U_NA,    U_NA
+
+/**
+ * Add Home Row mod to a layout.
+ *
+ * Expects a 10-key per row layout.  Adds support for GASC (Gui, Alt, Shift, Ctl)
+ * home row.  The layout passed in parameter must contain at least 20 keycodes.
+ *
+ * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
+ *
+ *     HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO)
+ */
+#define _HOME_ROW_MOD_GASC(                                            \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,                  \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,                  \
+    ...)                                                               \
+             L00,         L01,         L02,         L03,         L04,  \
+             R05,         R06,         R07,         R08,         R09,  \
+      LGUI_T(L10), LALT_T(L11), LSFT_T(L12), LCTL_T(L13),        L14,  \
+             R15,  RCTL_T(R16), RSFT_T(R17), LALT_T(R18), RGUI_T(R19), \
+      __VA_ARGS__
+#define HOME_ROW_MOD_GASC(...) _HOME_ROW_MOD_GASC(__VA_ARGS__)
+
+/**
+ * Add mouse layer keys to a layout.
+ *
+ * Expects a 10-key per row layout.  The layout passed in parameter must contain
+ * at least 30 keycodes.
+ *
+ * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
+ *
+ *     MOUSE_MOD(LAYOUT_LAYER_BASE_BEPO)
+ */
+#define _MOUSE_MOD(                                               \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,             \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,             \
+    L20, L21, L22, L23, L24, R25, R26, R27, R28, R29,             \
+    ...)                                                          \
+            L00,        L01,        L02,        L03,        L04,  \
+            R05,        R06,        R07,        R08,        R09,  \
+            L10,        L11,        L12,        L13,        L14,  \
+            R15,        R16,        R17,        R18,        R19,  \
+            L20, MOUSE(L21),        L22,        L23,        L24,  \
+            R25,        R26,        R27,        R28,  MOUSE(R29), \
+      __VA_ARGS__
+#define MOUSE_MOD(...) _MOUSE_MOD(__VA_ARGS__)
+
+#define LAYOUT_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [LAYER_BASE] = LAYOUT_wrapper(
+    MOUSE_MOD(HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO))
+  ),
+  [LAYER_MBO] = LAYOUT_wrapper(LAYOUT_LAYER_MBO),
+  [LAYER_MEDIA] = LAYOUT_wrapper(LAYOUT_LAYER_MEDIA),
+  [LAYER_NAV] = LAYOUT_wrapper(LAYOUT_LAYER_NAV),
+  [LAYER_MOUSE] = LAYOUT_wrapper(LAYOUT_LAYER_MOUSE),
+  [LAYER_SYM] = LAYOUT_wrapper(LAYOUT_LAYER_SYM),
+  [LAYER_NUM] = LAYOUT_wrapper(LAYOUT_LAYER_NUM),
+  [LAYER_FUN] = LAYOUT_wrapper(LAYOUT_LAYER_FUN),
+};
+// clang-format on
+
+#if defined(POINTING_DEVICE_ENABLE) && defined(DILEMMA_AUTO_SNIPING_ON_LAYER)
+layer_state_t layer_state_set_kb(layer_state_t state) {
+    state = layer_state_set_user(state);
+    dilemma_set_pointer_sniping_enabled(layer_state_cmp(state, DILEMMA_AUTO_SNIPING_ON_LAYER));
+    return state;
+}
+#endif // POINTING_DEVICE_ENABLE && DILEMMA_AUTO_SNIPING_ON_LAYER
+
+#ifdef RGB_MATRIX_ENABLE
+// Forward-declare this helper function since it is defined in rgb_matrix.c.
+void rgb_matrix_update_pwm_buffers(void);
+#endif
+
+void shutdown_user(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_enable_noeeprom();
+    rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
+    rgblight_setrgb(RGB_RED);
+#endif // RGBLIGHT_ENABLE
+#ifdef RGB_MATRIX_ENABLE
+    rgb_matrix_set_color_all(RGB_RED);
+    rgb_matrix_update_pwm_buffers();
+#endif // RGB_MATRIX_ENABLE
+}
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/readme.md b/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/readme.md
new file mode 100644
index 0000000000..df1f43cbcb
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/readme.md
@@ -0,0 +1,3 @@
+# Dilemma @bstiq keymap
+
+Inspired from Miryoku, using home-rows.
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/default/keymap.c b/keyboards/bastardkb/dilemma/3x5_2/keymaps/default/keymap.c
new file mode 100644
index 0000000000..0f9aff0a85
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/default/keymap.c
@@ -0,0 +1,84 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum charybdis_keymap_layers {
+    LAYER_BASE = 0,
+    LAYER_NAV,
+    LAYER_SYM,
+    LAYER_NUM,
+};
+
+#define NAV MO(LAYER_NAV)
+#define SYM MO(LAYER_SYM)
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [LAYER_BASE] = LAYOUT_split_3x5_2(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+          KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,       KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,       KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,       KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                                      NAV, CW_TOGG,     KC_SPC,     SYM
+  //                            ╰──────────────────╯ ╰──────────────────╯
+  ),
+
+  [LAYER_NAV] = LAYOUT_split_3x5_2(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+        KC_TAB, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,    XXXXXXX, KC_HOME,   KC_UP,  KC_END,  KC_DEL,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_LSFT, KC_LCTL, KC_LALT, KC_RGUI, KC_VOLD,    XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       QK_BOOT, EE_CLR,  KC_MPRV, KC_MNXT, KC_MPLY,    XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX,  KC_ENT,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                                  _______, KC_LSFT,     KC_SPC, _______
+  //                            ╰──────────────────╯ ╰──────────────────╯
+  ),
+
+  [LAYER_SYM] = LAYOUT_split_3x5_2(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+        KC_ESC, KC_LBRC, KC_LCBR, KC_LPRN, KC_TILD,    KC_CIRC, KC_RPRN, KC_RCBR, KC_RBRC,  KC_GRV,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_MINS, KC_ASTR,  KC_EQL, KC_UNDS,  KC_DLR,    KC_HASH, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_PLUS, KC_PIPE,   KC_AT, KC_SLSH, KC_PERC,    _______, KC_BSLS, KC_AMPR, KC_QUES, KC_EXLM,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                                  _______, KC_LSFT,     KC_SPC, _______
+  //                            ╰──────────────────╯ ╰──────────────────╯
+  ),
+
+  [LAYER_NUM] = LAYOUT_split_3x5_2(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+          KC_1,    KC_2,    KC_3,    KC_4,    KC_5,       KC_6,    KC_7,    KC_8,    KC_9,   KC_0,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,  KC_F11,     KC_F12, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+         KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,      KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                                  _______, KC_LSFT,     KC_SPC, _______
+  //                            ╰──────────────────╯ ╰──────────────────╯
+  ),
+};
+// clang-format on
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, LAYER_NAV, LAYER_SYM, LAYER_NUM);
+}
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/config.h b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/config.h
new file mode 100644
index 0000000000..d7b1351d89
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/config.h
@@ -0,0 +1,8 @@
+// Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define CIRQUE_PINNACLE_TAP_ENABLE
+#define POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE
+#define POINTING_DEVICE_GESTURES_SCROLL_ENABLE
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c
new file mode 100644
index 0000000000..9cd21c3c1f
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c
@@ -0,0 +1,160 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "drashna.h"
+
+// clang-format off
+#define LAYOUT_split_3x5_2_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__)
+#define LAYOUT_split_3x5_2_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+    ) \
+    LAYOUT_split_3x5_2 ( \
+       K01,    K02,      K03,     K04,     K05,                K06,     K07,     K08,     K09,     K0A, \
+       ALT_T(K11), K12,  K13,     K14,     GUI_T(K15),  LGUI_T(K16),    K17,     K18,     K19, LALT_T(K1A), \
+       CTL_T(K21), K22,  K23,     K24,     K25,                K26,     K27,     K28,     K29, RCTL_T(K2A), \
+                              KC_SPC,  BK_LWER,              DL_RAIS, RSFT_T(KC_ENT) \
+    )
+
+#define LAYOUT_split_3x5_2_base_wrapper(...)       LAYOUT_split_3x5_2_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_DEFAULT_LAYER_1] = LAYOUT_split_3x5_2_base_wrapper(
+        _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+        _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+        _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+    ),
+
+    [_DEFAULT_LAYER_2] = LAYOUT_split_3x5_2_base_wrapper(
+        ______________COLEMAK_MOD_DH_L1____________, ______________COLEMAK_MOD_DH_R1____________,
+        ______________COLEMAK_MOD_DH_L2____________, ______________COLEMAK_MOD_DH_R2____________,
+        ______________COLEMAK_MOD_DH_L3____________, ______________COLEMAK_MOD_DH_R3____________
+    ),
+    [_DEFAULT_LAYER_3] = LAYOUT_split_3x5_2_base_wrapper(
+        _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+        _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+        _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+    ),
+
+    [_DEFAULT_LAYER_4] = LAYOUT_split_3x5_2_base_wrapper(
+        _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+        _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+        _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+    ),
+
+    [_MOUSE] = LAYOUT_split_3x5_2(
+        _______, _______, _______, _______, _______,    KC_WH_U, DPI_RMOD,DPI_MOD, S_D_RMOD,S_D_MOD,
+        _______, _______, _______, _______, _______,    KC_WH_D, KC_BTN1, KC_BTN3, KC_BTN2, KC_BTN6,
+        _______, _______, _______, _______, _______,    KC_BTN7, KC_BTN4, KC_BTN5, KC_BTN8, _______,
+                                    SNIPING, _______,    _______, _______
+    ),
+    [_LOWER] = LAYOUT_split_3x5_2_wrapper(
+        _________________LOWER_L1__________________,    _________________LOWER_R1__________________,
+        _________________LOWER_L2__________________,    _________________LOWER_R2__________________,
+        _________________LOWER_L3__________________,    _________________LOWER_R3__________________,
+                                   _______, _______,    _______, AUTO_CTN
+    ),
+    [_RAISE] = LAYOUT_split_3x5_2_wrapper(
+        _________________RAISE_L1__________________,    _________________RAISE_R1__________________,
+        _________________RAISE_L2__________________,    _________________RAISE_R2__________________,
+        _________________RAISE_L3__________________,    _________________RAISE_R3__________________,
+                                   _______, _______,    _______, _______
+    ),
+    [_ADJUST] = LAYOUT_split_3x5_2_wrapper(
+        _________________ADJUST_L1_________________,    _________________ADJUST_R1_________________,
+        _________________ADJUST_L2_________________,    _________________ADJUST_R2_________________,
+        _________________ADJUST_L3_________________,    _________________ADJUST_R3_________________,
+                                   KC_NUKE, _______,    _______, QK_BOOT
+    ),
+};
+
+
+void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
+    for (int32_t i = 0; i < 40; i++) {
+        __asm__ volatile("nop" ::: "memory");
+    }
+}
+
+
+#if defined(OLED_ENABLE) && defined(OLED_DISPLAY_128X128)
+#    ifdef UNICODE_COMMON_ENABLE
+#        include "process_unicode_common.h"
+#        include "keyrecords/unicode.h"
+#    endif
+
+extern const char PROGMEM display_border[3];
+
+
+extern uint32_t oled_timer;
+extern bool is_oled_enabled;
+
+
+bool oled_task_keymap(void) {
+    static const char PROGMEM header_image[] = {
+        0, 192, 32, 16, 8, 4, 2, 1, 1, 1, 1, 1, 1, 1, 1, 3, 7, 15, 31, 63, 127, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 127, 63, 31, 15, 7, 3, 1, 1, 1, 1, 1, 1, 1, 1, 2, 4, 8, 16, 32, 192, 0,
+        //         0,255,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  3,  7, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  7,  3,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,255,  0
+    };
+    oled_write_raw_P(header_image, sizeof(header_image));
+    oled_set_cursor(7, 0);
+    oled_write_P(PSTR("Rock On"), true);
+
+    render_default_layer_state(1, 1);
+    render_layer_state(1, 2);
+    render_kitty(0, 5);
+    render_wpm(1, 7, 5);
+#   if defined(POINTING_DEVICE_ENABLE)
+    render_pointing_dpi_status(dilemma_get_pointer_sniping_enabled() ? dilemma_get_pointer_sniping_dpi() : dilemma_get_pointer_default_dpi(), 1, 7, 6);
+    render_mouse_mode(17, 6);
+#    elif defined(WPM_ENABLE) && defined(DEBUG_MATRIX_SCAN_RATE)
+    render_matrix_scan_rate(1, 7, 6);
+#    endif
+    render_bootmagic_status(7, 7);
+    render_user_status(1, 9);
+
+    render_mod_status(get_mods() | get_oneshot_mods(), 1, 10);
+    render_keylock_status(host_keyboard_led_state(), 1, 11);
+    render_unicode_mode(1, 12);
+
+//    render_rgb_hsv(1, 13);
+    oled_set_cursor(1, 13);
+    // oled_write_P(PSTR("Timer:"), false);
+    // oled_write(get_u8_str((uint8_t)(timer_elapsed32(oled_timer) / 1000), ' '), false);
+    oled_write_P(PSTR("Status: "), false);
+    if (is_oled_enabled) {
+        oled_write_P(PSTR("on "), false);
+    } else {
+        oled_write_P(PSTR("off"), false);
+    }
+
+    render_keylogger_status(1, 14);
+
+    for (uint8_t i = 1; i < 15; i++) {
+        oled_set_cursor(0, i);
+        oled_write_raw_P(display_border, sizeof(display_border));
+        oled_set_cursor(21, i);
+        oled_write_raw_P(display_border, sizeof(display_border));
+    }
+
+    static const char PROGMEM footer_image[] = {0, 3, 4, 8, 16, 32, 64, 128, 128, 128, 128, 128, 128, 128, 192, 224, 240, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 240, 224, 192, 128, 128, 128, 128, 128, 128, 128, 64, 32, 16, 8, 4, 3, 0};
+    oled_set_cursor(0, 15);
+    oled_write_raw_P(footer_image, sizeof(footer_image));
+
+    return false;
+}
+#endif
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/rules.mk b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/rules.mk
new file mode 100644
index 0000000000..41d73bc49a
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/rules.mk
@@ -0,0 +1,8 @@
+SWAP_HANDS_ENABLE     = no
+AUTOCORRECT_ENABLE    = yes
+CAPS_WORD_ENABLE      = yes
+CONSOLE_ENABLE        = yes
+KEYLOGGER_ENABLE      = no
+WPM_ENABLE            = yes
+OLED_ENABLE           = yes
+OLED_DRIVER           = custom
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/config.h b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/config.h
new file mode 100644
index 0000000000..fbe61df03b
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/config.h
@@ -0,0 +1,91 @@
+/**
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifdef VIA_ENABLE
+/* VIA configuration. */
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 6
+#endif // VIA_ENABLE
+
+/* Disable unused features. */
+#define NO_ACTION_ONESHOT
+
+#ifndef TAPPING_TERM
+/**
+ * \brief Configure the global tapping term (default: 200ms).
+ *
+ * If you have a lot of accidental mod activations, crank up the tapping term.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
+ */
+#    define TAPPING_TERM 200
+#endif // TAPPING_TERM
+
+/**
+ * \brief Enable rapid switch from tap to hold.
+ *
+ * Note that a side-effect of this setting is to disable auto-repeat when
+ * pressing key twice, except for one-shot keys.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
+ */
+#define TAPPING_FORCE_HOLD
+
+/*
+ * Tap-or-Hold decision modes.
+ *
+ * Note that the following flags behave differently when combined (ie. when 2 or
+ * more are enabled).
+ *
+ * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
+ * decision modes.
+ */
+
+/**
+ * \brief Faster tap-hold trigger.
+ *
+ * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
+ * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
+ */
+#define PERMISSIVE_HOLD
+
+/**
+ * \brief Prevent normal rollover on alphas from accidentally triggering mods.
+ *
+ * Ignores key presses that interrupt a mod-tap.  Must-have for Home Row mod.
+ *
+ * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
+ * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
+ */
+#define IGNORE_MOD_TAP_INTERRUPT
+
+/* Charybdis-specific features. */
+
+#ifdef POINTING_DEVICE_ENABLE
+// Automatically enable the pointer layer when moving the trackball.  See also:
+// - `DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
+// - `DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
+// #define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+#endif // POINTING_DEVICE_ENABLE
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/keymap.c b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/keymap.c
new file mode 100644
index 0000000000..082a151674
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/keymap.c
@@ -0,0 +1,229 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#ifdef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+#    include "timer.h"
+#endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+
+enum dilemma_keymap_layers {
+    LAYER_BASE = 0,
+    LAYER_FUNCTION,
+    LAYER_NAVIGATION,
+    LAYER_POINTER,
+    LAYER_NUMERAL,
+    LAYER_SYMBOLS,
+};
+
+// Automatically enable sniping-mode on the pointer layer.
+#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_POINTER
+
+#ifdef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+static uint16_t auto_pointer_layer_timer = 0;
+
+#    ifndef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
+#        define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
+#    endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
+
+#    ifndef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
+#        define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
+#    endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
+#endif     // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+
+#define SPC_NAV LT(LAYER_NAVIGATION, KC_SPC)
+#define TAB_FUN LT(LAYER_FUNCTION, KC_TAB)
+#define ENT_SYM LT(LAYER_SYMBOLS, KC_ENT)
+#define BSP_NUM LT(LAYER_NUMERAL, KC_BSPC)
+#define _L_PTR(KC) LT(LAYER_POINTER, KC)
+
+#ifndef POINTING_DEVICE_ENABLE
+#    define DRGSCRL KC_NO
+#    define DPI_MOD KC_NO
+#    define S_D_MOD KC_NO
+#    define SNIPING KC_NO
+#endif // !POINTING_DEVICE_ENABLE
+
+// clang-format off
+/** \brief QWERTY layout (3 rows, 10 columns). */
+#define LAYOUT_LAYER_BASE                                                                     \
+       KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, \
+       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_QUOT, \
+       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, \
+                               TAB_FUN, SPC_NAV, ENT_SYM, BSP_NUM
+
+/** Convenience row shorthands. */
+#define _______________DEAD_HALF_ROW_______________ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+#define ______________HOME_ROW_GACS_L______________ KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX
+#define ______________HOME_ROW_GACS_R______________ XXXXXXX, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI
+
+/*
+ * Layers used on the Dilemma.
+ *
+ * These layers started off heavily inspired by the Miryoku layout, but trimmed
+ * down and tailored for a stock experience that is meant to be fundation for
+ * further personalization.
+ *
+ * See https://github.com/manna-harbour/miryoku for the original layout.
+ */
+
+/**
+ * \brief Function layer.
+ *
+ * Secondary right-hand layer has function keys mirroring the numerals on the
+ * primary layer with extras on the pinkie column, plus system keys on the inner
+ * column. App is on the tertiary thumb key and other thumb keys are duplicated
+ * from the base layer to enable auto-repeat.
+ */
+#define LAYOUT_LAYER_FUNCTION                                                                 \
+    _______________DEAD_HALF_ROW_______________, KC_PSCR,   KC_F7,   KC_F8,   KC_F9,  KC_F12, \
+    ______________HOME_ROW_GACS_L______________, KC_SLCK,   KC_F4,   KC_F5,   KC_F6,  KC_F11, \
+    _______________DEAD_HALF_ROW_______________, KC_PAUS,   KC_F1,   KC_F2,   KC_F3,  KC_F10, \
+                               _______, XXXXXXX, XXXXXXX, XXXXXXX
+
+/** \brief Mouse emulation and pointer functions. */
+#define LAYOUT_LAYER_POINTER                                                                  \
+    QK_BOOT, XXXXXXX, XXXXXXX, DPI_MOD, S_D_MOD, S_D_MOD, DPI_MOD, XXXXXXX, XXXXXXX, QK_BOOT, \
+    ______________HOME_ROW_GACS_L______________, ______________HOME_ROW_GACS_R______________, \
+    _______, DRGSCRL, SNIPING, KC_BTN3, XXXXXXX, XXXXXXX, KC_BTN3, SNIPING, DRGSCRL, _______, \
+                               KC_BTN2, KC_BTN1, KC_BTN1, KC_BTN2
+
+/**
+ * \brief Navigation layer.
+ *
+ * Primary right-hand layer (left home thumb) is navigation and editing. Cursor
+ * keys are on the home position, line and page movement below, clipboard above,
+ * caps lock and insert on the inner column. Thumb keys are duplicated from the
+ * base layer to avoid having to layer change mid edit and to enable auto-repeat.
+ */
+#define LAYOUT_LAYER_NAVIGATION                                                               \
+    _______________DEAD_HALF_ROW_______________, _______________DEAD_HALF_ROW_______________, \
+    ______________HOME_ROW_GACS_L______________, KC_CLCK, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT, \
+    _______________DEAD_HALF_ROW_______________,  KC_INS, KC_HOME, KC_PGDN, KC_PGUP,  KC_END, \
+                               XXXXXXX, _______,  KC_ENT, KC_BSPC
+
+/**
+ * \brief Numeral layout.
+ *
+ * Primary left-hand layer (right home thumb) is numerals and symbols. Numerals
+ * are in the standard numpad locations with symbols in the remaining positions.
+ * `KC_DOT` is duplicated from the base layer.
+ */
+#define LAYOUT_LAYER_NUMERAL                                                                  \
+    KC_LBRC,    KC_7,    KC_8,    KC_9, KC_RBRC, _______________DEAD_HALF_ROW_______________, \
+    KC_SCLN,    KC_4,    KC_5,    KC_6,  KC_EQL, ______________HOME_ROW_GACS_R______________, \
+     KC_DOT,    KC_1,    KC_2,    KC_3, KC_BSLS, _______________DEAD_HALF_ROW_______________, \
+                               KC_MINS,    KC_0, XXXXXXX, _______
+
+/**
+ * \brief Symbols layer.
+ *
+ * Secondary left-hand layer has shifted symbols in the same locations to reduce
+ * chording when using mods with shifted symbols. `KC_LPRN` is duplicated next to
+ * `KC_RPRN`.
+ */
+#define LAYOUT_LAYER_SYMBOLS                                                                  \
+    KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, _______________DEAD_HALF_ROW_______________, \
+    KC_COLN,  KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GACS_R______________, \
+    KC_TILD, KC_EXLM,   KC_AT, KC_HASH, KC_PIPE, _______________DEAD_HALF_ROW_______________, \
+                                KC_GRV, KC_UNDS, _______, XXXXXXX
+
+/**
+ * \brief Add Home Row mod to a layout.
+ *
+ * Expects a 10-key per row layout.  Adds support for GACS (Gui, Alt, Ctl, Shift)
+ * home row.  The layout passed in parameter must contain at least 20 keycodes.
+ *
+ * This is meant to be used with `LAYER_ALPHAS_QWERTY` defined above, eg.:
+ *
+ *     HOME_ROW_MOD_GACS(LAYER_ALPHAS_QWERTY)
+ */
+#define _HOME_ROW_MOD_GACS(                                            \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,                  \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,                  \
+    ...)                                                               \
+             L00,         L01,         L02,         L03,         L04,  \
+             R05,         R06,         R07,         R08,         R09,  \
+      LGUI_T(L10), LALT_T(L11), LCTL_T(L12), LSFT_T(L13),        L14,  \
+             R15,  RSFT_T(R16), RCTL_T(R17), LALT_T(R18), RGUI_T(R19), \
+      __VA_ARGS__
+#define HOME_ROW_MOD_GACS(...) _HOME_ROW_MOD_GACS(__VA_ARGS__)
+
+/**
+ * \brief Add pointer layer keys to a layout.
+ *
+ * Expects a 10-key per row layout.  The layout passed in parameter must contain
+ * at least 30 keycodes.
+ *
+ * This is meant to be used with `LAYER_ALPHAS_QWERTY` defined above, eg.:
+ *
+ *     POINTER_MOD(LAYER_ALPHAS_QWERTY)
+ */
+#define _POINTER_MOD(                                                  \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,                  \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,                  \
+    L20, L21, L22, L23, L24, R25, R26, R27, R28, R29,                  \
+    ...)                                                               \
+             L00,         L01,         L02,         L03,         L04,  \
+             R05,         R06,         R07,         R08,         R09,  \
+             L10,         L11,         L12,         L13,         L14,  \
+             R15,         R16,         R17,         R18,         R19,  \
+      _L_PTR(L20),        L21,         L22,         L23,         L24,  \
+             R25,         R26,         R27,         R28,  _L_PTR(R29), \
+      __VA_ARGS__
+#define POINTER_MOD(...) _POINTER_MOD(__VA_ARGS__)
+
+#define LAYOUT_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [LAYER_BASE] = LAYOUT_wrapper(
+    POINTER_MOD(HOME_ROW_MOD_GACS(LAYOUT_LAYER_BASE))
+  ),
+  [LAYER_FUNCTION] = LAYOUT_wrapper(LAYOUT_LAYER_FUNCTION),
+  [LAYER_NAVIGATION] = LAYOUT_wrapper(LAYOUT_LAYER_NAVIGATION),
+  [LAYER_NUMERAL] = LAYOUT_wrapper(LAYOUT_LAYER_NUMERAL),
+  [LAYER_POINTER] = LAYOUT_wrapper(LAYOUT_LAYER_POINTER),
+  [LAYER_SYMBOLS] = LAYOUT_wrapper(LAYOUT_LAYER_SYMBOLS),
+};
+// clang-format on
+
+#ifdef POINTING_DEVICE_ENABLE
+#    ifdef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
+    if (abs(mouse_report.x) > DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD || abs(mouse_report.y) > DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD) {
+        if (auto_pointer_layer_timer == 0) {
+            layer_on(LAYER_POINTER);
+        }
+        auto_pointer_layer_timer = timer_read();
+    }
+    return mouse_report;
+}
+
+void matrix_scan_user(void) {
+    if (auto_pointer_layer_timer != 0 && TIMER_DIFF_16(timer_read(), auto_pointer_layer_timer) >= DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS) {
+        auto_pointer_layer_timer = 0;
+        layer_off(LAYER_POINTER);
+    }
+}
+#    endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+
+#    ifdef DILEMMA_AUTO_SNIPING_ON_LAYER
+layer_state_t layer_state_set_user(layer_state_t state) {
+    dilemma_set_pointer_sniping_enabled(layer_state_cmp(state, DILEMMA_AUTO_SNIPING_ON_LAYER));
+    return state;
+}
+#    endif // DILEMMA_AUTO_SNIPING_ON_LAYER
+#endif     // POINTING_DEVICE_ENABLE
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/readme.md b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/readme.md
new file mode 100644
index 0000000000..df40677f4d
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/readme.md
@@ -0,0 +1,67 @@
+# Dilemma `via` keymap
+
+The Dilemma `via` keymap is based on a QWERTY layout with [home row mods](https://precondition.github.io/home-row-mods) and [Miryoku-inspired layers](https://github.com/manna-harbour/miryoku), and some features and changes specific to the Dilemma.
+
+This layout also supports VIA.
+
+## Customizing the keymap
+
+### Dynamic DPI scaling
+
+Use the following keycodes to change the default DPI:
+
+-   `POINTER_DEFAULT_DPI_FORWARD`: increases the DPI; decreases when shifted;
+-   `POINTER_DEFAULT_DPI_REVERSE`: decreases the DPI; increases when shifted.
+
+There's a maximum of 16 possible values for the sniping mode DPI. See the [Dilemma documentation](../../README.md) for more information.
+
+Use the following keycodes to change the sniping mode DPI:
+
+-   `POINTER_SNIPING_DPI_FORWARD`: increases the DPI; decreases when shifted;
+-   `POINTER_SNIPING_DPI_REVERSE`: decreases the DPI; increases when shifted.
+
+There's a maximum of 4 possible values for the sniping mode DPI. See the [Dilemma documentation](../../README.md) for more information.
+
+### Drag-scroll
+
+Use the `DRAGSCROLL_MODE` keycode to enable drag-scroll on hold. Use the `DRAGSCROLL_TOGGLE` keycode to enable/disable drag-scroll on key press.
+
+### Circular scroll
+
+By default, the firmware is configured to enable the circular scroll feature on Cirque trackpad.
+
+To disable this, add the following to your keymap:
+
+```c
+#undef POINTING_DEVICE_GESTURES_SCROLL_ENABLE
+```
+
+### Sniping
+
+Use the `SNIPING_MODE` keycode to enable sniping mode on hold. Use the `SNIPING_TOGGLE` keycode to enable/disable sniping mode on key press.
+
+Change the value of `DILEMMA_AUTO_SNIPING_ON_LAYER` to automatically enable sniping mode on layer change. By default, sniping mode is enabled on the pointer layer:
+
+```c
+#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_POINTER
+```
+
+### Auto pointer layer
+
+The pointer layer can be automatically enabled when moving the trackball. To enable or disable this behavior, add or remove the following define:
+
+```c
+#define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+```
+
+By default, the layer is turned off 1 second after the last registered trackball movement:
+
+```c
+#define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
+```
+
+The trigger sensibility can also be tuned. The lower the value, the more sensible the trigger:
+
+```c
+#define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
+```
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/rules.mk b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/rules.mk
new file mode 100644
index 0000000000..1e5b99807c
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes