[keyboard] bastardkb: restructure folder hierarchy (#16778)

* bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus

Upcoming support for the following (adapter, mcu) pairs will be
submitted in follow-up PRs:

- `v2/elitec`
- `v2/stemcell`
- `blackpill`

This PR contains the following changes:

- Move previous implementation to an inner `v1/elitec` folder
- Move keyboard USB IDs and strings to data driven
- Update headers to update maintainers list
- Run `qmk format-c`

* bastardkb/charybdis: remove broken acceleration implementation

* bastardkb/charybdis: fix debug output

* bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair

* bastardkb: add Blackpill support

* bastardkb/charybdis/3x5: add `bstiq` keymap

* bastardkb/charybdis: add fake LEDs to the configuration

For the Charybdis 3x5 (respectively 4x6), the LED config now simulates
36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to
prevent confusion when testing LEDs during assembly when handedness is
not set correctly.  Those fake LEDs are bound to the physical
bottom-left corner.

* bastardkbk/charybdis/readme.md: update build commands

Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield.

* bastardkb/charybdis: fix Via keymap with blackpill

* bastardkb/charybdis: add 3x6 configuration

* bastardkb/charybdis: remove unnecessary files

* bastardkb/charybdis: remove obsolete code

* bastardkb/charybdis/3x6: add Via keymap

* bastardkb: add support for Splinky (RP2040) board

* bastardkb: initial configuration for the Splinky (SPI not working yet)

* bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball

* bastardkb/charybdis/3x6: add splinky config

* bastardkb/*/v2/splinky: update drivers to `vendor`

* bastardkb/dilemma: add new board

* bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps

* bastardkb/dilemma: add `bstiq` keymap

* bastardkb: specify blackpill boards

* bastardkb/charybdis: fix blackpill-specific define syntax

* bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options

* bastardkb: fix `QK_BOOT` keycodes

* bastardkb/dilemma: fix mouse direction on X axis

* bastardkb/charybdis/3x6: adjust CS

* bastardkb/dilemma: adjust trackpad configuration

* charybdis: fix `PWM33XX_CS_PIN` defines

This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613.

* bastardkb: remove Vial mentions from `bstiq` keymaps

* Cleanup unnecessary comments

Co-authored-by: Nathan <nathan.cooke@compass.com>
Co-authored-by: Charly Delay <0xcharly@codesink.dev>

1 files changed, 17 insertions, 32 deletions

diff --git a/keyboards/bastardkb/charybdis/readme.md b/keyboards/bastardkb/charybdis/readme.md
index d786abf36e..c112c1150e 100644
--- a/keyboards/bastardkb/charybdis/readme.md
+++ b/keyboards/bastardkb/charybdis/readme.md
@@ -18,33 +18,32 @@ Check out the [keyboard build guides](https://docs.bastardkb.com) for the Charyb
 
 ## Building the firmware
 
-### Charybdis (4x6)
-
-The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout.
+**You must specify the shield version when compiling/flashing the firmware.**
 
+The template is:
 ```shell
-qmk compile -kb bastardkb/charybdis/4x6 -km default
+qmk compile -kb bastardkb/charybdis/{LAYOUT}/{VERSION}/elitec -km {KEYMAP}
 ```
 
-Check out the `via` layout if you're looking for VIA support:
+See below for populated commands per layout
 
-```shell
-qmk compile -kb bastardkb/charybdis/4x6 -km via
-```
+The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout.
 
-### Charybdis (3x5)
+Check out the `via` layout if you're looking for VIA support.
 
-The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout.
+### Charybdis (4x6)
 
-```shell
-qmk compile -kb bastardkb/charybdis/3x5 -km default
-```
+| Shield Version | default                                                         | via                                                             |
+|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------|
+| v1             | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km via`     |
+| v2             | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km via` |
 
-Check out the `via` layout if you're looking for VIA support:
+### Charybdis (3x5)
 
-```shell
-qmk compile -kb bastardkb/charybdis/3x5 -km via
-```
+| Shield Version | default                                                         | via                                                             |
+|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------|
+| v1             | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km via`     |
+| v2             | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km via` |
 
 ## Customizing the firmware
 
@@ -73,7 +72,7 @@ Drag-scroll enables scrolling with the trackball. When drag-scroll is enabled, t
 
 Call `charybdis_set_pointer_dragscroll_enabled(bool enable)` to enable/disable drag-scroll.
 
-`charybdis_get_pointer_dragscroll_enabled()` returns whether sniping mode is currently enabled.
+`charybdis_get_pointer_dragscroll_enabled()` returns whether drag-scroll mode is currently enabled.
 
 To invert the horizontal scrolling direction, define `CHARYBDIS_DRAGSCROLL_REVERSE_X`:
 
@@ -114,20 +113,6 @@ This behavior can be further customized with the following defines:
 #define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100
 ```
 
-### Acceleration
-
-By default, the pointer's movements are linear. To enable acceleration, add the following define:
-
-```c
-#define CHARYBDIS_POINTER_ACCELERATION_ENABLE
-```
-
-The acceleration factor can be further tune _via_ the `CHARYBDIS_POINTER_ACCELERATION_FACTOR`:
-
-```c
-#define CHARYBDIS_POINTER_ACCELERATION_FACTOR 24
-```
-
 ### Custom keycodes
 
 The Charybdis firmware defines a number of keycodes to leverage its features, namely: