Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

1 files changed, 0 insertions, 68 deletions

diff --git a/keyboard/retro_refit/retro_refit.c b/keyboard/retro_refit/retro_refit.c
deleted file mode 100644
index 78b6edca75..0000000000
--- a/keyboard/retro_refit/retro_refit.c
+++ /dev/null
@@ -1,68 +0,0 @@
-#include "retro_refit.h"
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-    // leave this function blank - it can be defined in a keymap file
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-    // leave this function blank - it can be defined in a keymap file
-};
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    // leave this function blank - it can be defined in a keymap file
-};
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    // Disable status LED on KB, enable status LED on Teensy (KB_STATUS = !TEENSY_STATUS)
-    DDRD |= (1<<6);
-    PORTD |= (1<<6);
-
-    matrix_init_user();
-};
-
-void amatrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-};
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output low
-        DDRD |= (1<<0);
-        PORTD &= ~(1<<0);
-    } else {
-        // Hi-Z
-        DDRD &= ~(1<<0);
-        PORTD &= ~(1<<0);
-    }
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        // output low
-        DDRD |= (1<<1);
-        PORTD &= ~(1<<1);
-    } else {
-        // Hi-Z
-        DDRD &= ~(1<<1);
-        PORTD &= ~(1<<1);
-    }
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-        // output low
-        DDRC |= (1<<6);
-        PORTC &= ~(1<<6);
-    } else {
-        // Hi-Z
-        DDRC &= ~(1<<6);
-        PORTC &= ~(1<<6);
-    }
-
-    led_set_user(usb_led);
-};
\ No newline at end of file