Merge remote-tracking branch 'upstream/master'

22 files changed, 1731 insertions, 0 deletions

diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
new file mode 100644
index 0000000000..001f17f316
--- /dev/null
+++ b/keyboard/planck/Makefile
@@ -0,0 +1,136 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = planck_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c \
+	backlight.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_jack.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/planck/Makefile.pjrc b/keyboard/planck/Makefile.pjrc
new file mode 100644
index 0000000000..be83ba18b1
--- /dev/null
+++ b/keyboard/planck/Makefile.pjrc
@@ -0,0 +1,116 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_jack.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u4
+#MCU = at90usb1286
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
+CONSOLE_ENABLE = yes    # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DKEYMAP_PLAIN
+plain: all
+
+poker: OPT_DEFS += -DKEYMAP_POKER
+poker: all
+
+poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
+poker_set: all
+
+poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
+poker_bit: all
diff --git a/keyboard/planck/README.md b/keyboard/planck/README.md
new file mode 100644
index 0000000000..206d6ad80d
--- /dev/null
+++ b/keyboard/planck/README.md
@@ -0,0 +1,29 @@
+Planck keyboard firmware
+======================
+DIY/Assembled compact ortholinear keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com).
+
+## Notable TMK forks (which some of the keymap files are from)
+- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
+- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
+- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
+- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
+
+## Build
+
+Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else.
+
+Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type "make" to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST).
+
+Move to this directory then just run `make` like:
+
+    $ make
+
+Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
+
+
+## Keymap
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
+
+To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
+
+    $ make KEYMAP=[<name>]
diff --git a/keyboard/planck/backlight.c b/keyboard/planck/backlight.c
new file mode 100644
index 0000000000..ee7e31ee9c
--- /dev/null
+++ b/keyboard/planck/backlight.c
@@ -0,0 +1,46 @@
+
+#include <avr/io.h>
+#include "backlight.h"
+
+
+void backlight_init_ports()
+{
+    // Setup PB7 as output and output low.
+    DDRB |= (1<<7);
+    PORTB &= ~(1<<7);
+    
+    // Use full 16-bit resolution. 
+    ICR1 = 0xFFFF;
+
+    // I could write a wall of text here to explain... but TL;DW
+    // Go read the ATmega32u4 datasheet.
+    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+    
+    // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // (i.e. start high, go low when counter matches.)
+    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+    
+    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+    
+    // Default to zero duty cycle.
+    OCR1C = 0x0000;
+}
+
+void backlight_set(uint8_t level)
+{
+    if ( level == 0 )
+    {
+        // Turn off PWM control on PB7, revert to output low.
+        TCCR1A &= ~(_BV(COM1C1));
+    }
+    else
+    {
+        // Turn on PWM control of PB7
+        TCCR1A |= _BV(COM1C1);
+        OCR1C = level << 12 | 0x0FFF;
+    }
+}
+
diff --git a/keyboard/planck/backlight.h b/keyboard/planck/backlight.h
new file mode 100644
index 0000000000..0fe1f4a72b
--- /dev/null
+++ b/keyboard/planck/backlight.h
@@ -0,0 +1,2 @@
+
+void backlight_init_ports(void);
diff --git a/keyboard/planck/config.h b/keyboard/planck/config.h
new file mode 100644
index 0000000000..0b0c152479
--- /dev/null
+++ b/keyboard/planck/config.h
@@ -0,0 +1,74 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    jackhumbert
+#define PRODUCT         Planck
+#define DESCRIPTION     t.m.k. keyboard firmware for the Planck
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */
+#define BACKLIGHT_LEVELS 15
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/planck/keymap_brett.c b/keyboard/planck/keymap_brett.c
new file mode 100644
index 0000000000..97d832b47a
--- /dev/null
+++ b/keyboard/planck/keymap_brett.c
@@ -0,0 +1,42 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( 
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, RSFT,
+  TAB, LGUI,  RSFT, LALT, FN2,     SPC,     FN1,  LEFT, DOWN, UP,   RGHT),
+[1] = KEYMAP( /* RAISE */
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    DEL,
+  TRNS, F1,   F2,   F3,   F4,   F5,   F6,   4,    5,    6,   QUOT, TRNS,
+  TRNS, F7,   F8,   F9,   F10,  F11,  F12,  1,    2,    3,   TRNS, PGUP,
+  MPRV, MNXT, TRNS, MUTE, TRNS,    TRNS,    FN1,  0,  0,  TRNS, PGDN),
+[2] = KEYMAP( /* LOWER */
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS,
+  TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, BSLS, EQL,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  MPLY, MSTP, VOLU, VOLD, FN2,     TRNS,    TRNS, TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay 
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};
diff --git a/keyboard/planck/keymap_common.c b/keyboard/planck/keymap_common.c
new file mode 100644
index 0000000000..fdb1769e1c
--- /dev/null
+++ b/keyboard/planck/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/keyboard/planck/keymap_common.h b/keyboard/planck/keymap_common.h
new file mode 100644
index 0000000000..8a55fd9ee0
--- /dev/null
+++ b/keyboard/planck/keymap_common.h
@@ -0,0 +1,64 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+// MIT Layout
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35,      K37, K38, K39, K3A, K3B  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_NO,    KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }  \
+}
+
+// Grid Layout
+#define KEYMAP_GRID( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }  \
+}
+
+
+#endif
diff --git a/keyboard/planck/keymap_dotcom.c b/keyboard/planck/keymap_dotcom.c
new file mode 100644
index 0000000000..347f6dea91
--- /dev/null
+++ b/keyboard/planck/keymap_dotcom.c
@@ -0,0 +1,34 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( 
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  FN1,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, LBRC,
+  LCTL, BSLS, QUOT, LALT, FN22,    SPC,     LEFT, UP, DOWN, RGHT,  RBRC),
+[1] = KEYMAP( 
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    DEL,
+  TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17,  TRNS, TRNS, TRNS,
+  TRNS, FN18,  FN19,  FN22,  EQL,  MINS,  FN20,  TRNS,  TRNS,  TRNS,  TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,   FN1,  TRNS, VOLD, VOLU, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+};
diff --git a/keyboard/planck/keymap_jack.c b/keyboard/planck/keymap_jack.c
new file mode 100644
index 0000000000..c74812121f
--- /dev/null
+++ b/keyboard/planck/keymap_jack.c
@@ -0,0 +1,50 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Jack */
+  TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  ESC,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+  RSFT, LCTL, LALT, LGUI, FN2,    SPC,     FN1, LEFT, DOWN, UP,  RGHT),
+[1] = KEYMAP( /* Jack colemak */
+  TAB,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, BSPC,
+  ESC,  A,    R,    S,    T,    D,    H,    N,    E,    I,    O,     QUOT,
+  LSFT, Z,    X,    C,    V,    B,    K,    M,    COMM, DOT,  SLSH, ENT,
+  FN3, LCTL, LALT, LGUI, FN2,    SPC,     FN1, LEFT, DOWN, UP,  RGHT),
+[2] = KEYMAP( /* Jack RAISE */
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    BSPC,
+  TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL,  LBRC, RBRC, BSLS,
+  TRNS, F11,  F12,  F13,  F14,  F15,  F16,  F17,  F18,  F19,  F20, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,   FN1,  MNXT, VOLD, VOLU, MPLY),
+[3] = KEYMAP( /* Jack LOWER */
+  FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
+  TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+  TRNS, F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  TRNS,
+  TRNS, TRNS, TRNS, TRNS, FN2,    TRNS,    TRNS, MNXT, VOLD, VOLU, MPLY),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),  
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};
diff --git a/keyboard/planck/keymap_joe.c b/keyboard/planck/keymap_joe.c
new file mode 100644
index 0000000000..07122b702c
--- /dev/null
+++ b/keyboard/planck/keymap_joe.c
@@ -0,0 +1,107 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Joe colemak */
+  ESC,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, MINS,
+  BSPC, A,    R,    S,    T,    D,    H,    N,    E,    I,    O,    ENT,
+  TAB,  Z,    X,    C,    V,    B,    K,    M,    COMM, DOT,  SLSH, QUOT,
+  LCTL, LGUI, LALT, LSFT, FN1,    SPC,      FN0,  LEFT, DOWN, UP,  RGHT),
+[1] = KEYMAP( /* Joe qwerty */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    MINS,
+  BSPC, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+  TAB,  Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, QUOT,
+  LCTL, LGUI, LALT, LSFT, FN1,    SPC,      FN0,  LEFT, DOWN, UP,  RGHT),
+[2] = KEYMAP( /* Joe RAISE */
+  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,
+  DEL,  FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS,
+  BSLS, FN5,  FN6,  TRNS, TRNS, MENU, CAPS, INS,  PSCR, LBRC, RBRC, FN21,
+  TRNS, TRNS, TRNS, TRNS, FN2,     TRNS,    FN0,  FN26, FN27, FN28, FN29),
+[3] = KEYMAP( /* Joe LOWER */
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN7, FN8, FN9, FN30, FN31,
+  DEL,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    TRNS,
+  FN25, FN3,  FN4,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN23, FN24, EQL,
+  TRNS, TRNS, TRNS, TRNS, FN1,    TRNS,     FN2,  HOME, PGDN, PGUP, END),
+[4] = KEYMAP( /* Joe LOWER + RAISE */
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,     TRNS,   TRNS, MNXT, VOLD, VOLU, MPLY),
+};
+
+enum macro_id {
+    M_Q0,
+    M_Q1,
+    M_Q2,
+    M_Q3,
+    M_Q4
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+    [1] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(4),  // to Fn overlay
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0), 
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+    [5] = ACTION_MODS_KEY(MOD_LCTL, KC_PGDN),
+    [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PGUP),
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [7] = ACTION_MACRO(M_Q0),
+    [8] = ACTION_MACRO(M_Q1),
+    [9] = ACTION_MACRO(M_Q2),
+    [30] = ACTION_MACRO(M_Q3),
+    [31] = ACTION_MACRO(M_Q4),
+
+    [26] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_LEFT),
+    [27] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_DOWN),
+    [28] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_UP),
+    [29] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_RGHT),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{ 
+    keyevent_t event = record->event;
+    switch (id) {
+        case M_Q0:
+            return event.pressed ?
+                MACRO( D(LSFT), T(SCLN), U(LSFT), T(SLSH), END ) :
+                MACRO_NONE;
+        case M_Q1:
+            return event.pressed ?
+                MACRO( D(LSFT), T(SCLN), T(9), U(LSFT), END ) :
+                MACRO_NONE;
+        case M_Q2:
+            return event.pressed ?
+                MACRO( D(LSFT), T(0), T(SCLN), U(LSFT), END ) :
+                MACRO_NONE;
+        case M_Q3:
+            return event.pressed ?
+                MACRO( D(LSFT), T(9), T(SCLN), U(LSFT), END ) :
+                MACRO_NONE;
+        case M_Q4:
+            return event.pressed ?
+                MACRO( D(LSFT), T(SCLN), T(0), U(LSFT), END ) :
+                MACRO_NONE;
+
+    }
+    return MACRO_NONE;
+}
\ No newline at end of file
diff --git a/keyboard/planck/keymap_matthew.c b/keyboard/planck/keymap_matthew.c
new file mode 100644
index 0000000000..56e7003a97
--- /dev/null
+++ b/keyboard/planck/keymap_matthew.c
@@ -0,0 +1,70 @@
+// by Matthew Pepers - https://github.com/pepers
+
+/* grid planck layout - modified programmer dvorak
+,-----------------------------------------------------------------------------------------------.
+| pause |   @   |   |   |   ^   |       |       |       |       |   *   |   #   |   $   |  del  |
+|  esc  |  ; :  |  , <  |  . >  |   P   |   Y   |   F   |   G   |   G   |   C   |   R   | bkspc |
+|  F1   |  F2   |  F3   |  F4   |  F5   |  F6   |  F7   |  F8   |  F9   |  F10  |  F11  |  F12  |
+|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|
+|   &   |   /   |   {   |   (   |   [   |   =   |   !   |   ]   |   )   |   }   |   \   |   +   |
+|  ` ~  |   A   |   O   |   E   |   U   |   I   |   D   |   H   |   T   |   N   |   S   |  - _  |
+|   %   |   7   |   5   |   3   |   1   |   9   |   0   |   2   |   4   |   6   |   8   |   ?   |
+|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|
+|       |       |       |       |       |       |       |       |       |       |       | prtsc |
+|  tab  |  ' "  |   Q   |   J   |   K   |   X   |   B   |   M   |   W   |   V   |   Z   | retrn |
+|       |       |       |       |       |       |       |       |       |       |       | insrt |
+|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|
+|       |       |       |       |       |       |       |       |       |       |       |       |
+| lctrl | lgui  | lalt  | ralt  | lower | shift | space | raise | left  | down  |  up   | right |
+|       |       |       |       |       |       |       |       | home  | pgdn  | pgup  |  end  |
+`-----------------------------------------------------------------------------------------------'
+*/
+
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* 0: dvorak */
+  [0] = KEYMAP_GRID( ESC, SCLN, COMM,  DOT,    P,    Y,    F,    G,    C,    R,    L, BSPC,   \
+                     GRV,    A,    O,    E,    U,    I,    D,    H,    T,    N,    S, MINS,   \
+                     TAB, QUOT,    Q,    J,    K,    X,    B,    M,    W,    V,    Z,  ENT,   \
+                    LCTL, LGUI, LALT, RALT,  FN1, LSFT,  SPC,  FN2, LEFT, DOWN,   UP, RGHT),
+
+  /* 1: lower (FN1) */
+  [1] = KEYMAP_GRID( F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12,   \
+                   FN17,    7,    5,    3,    1,    9,    0,    2,    4,    6,    8, FN18,   \
+                   TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,  INS,   \
+                   TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP,  END),
+
+  /* 2: raise (FN2) */
+  [2] = KEYMAP_GRID(PAUS, FN19, FN20, FN21, TRNS, TRNS, TRNS, TRNS, FN22, FN23, FN24,  DEL,   \
+                    FN10, SLSH, FN11, FN12, LBRC,  EQL, FN13, RBRC, FN14, FN15, BSLS, FN16,   \
+                    TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR,   \
+                    TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),               // lower Fn layer
+    [2] = ACTION_LAYER_MOMENTARY(2),               // raise Fn layer
+
+    // lower row1
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_5),        // %
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH),    // ?
+    
+    // raise row0
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2),        // @
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLASH),   // |
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_6),        // ^
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_8),        // *
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_3),        // #
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_4),        // $
+    
+    // raise row1
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_7),        // &
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRACKET), // {
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_9),        // (
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_1),        // !
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_0),        // )
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRACKET), // }
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_EQUAL),    // +
+};
diff --git a/keyboard/planck/keymap_nathan.c b/keyboard/planck/keymap_nathan.c
new file mode 100644
index 0000000000..47539188ed
--- /dev/null
+++ b/keyboard/planck/keymap_nathan.c
@@ -0,0 +1,180 @@
+// Author: Nathan Ross Powell <nathanrospowell@gmail.com>
+// https://github.com/nathanrosspowell/tmk_keyboard/blob/planck-jack/keyboard/planck/keymap_nathan.c
+
+#include "keymap_common.h"
+
+#ifndef KEYMAP_GRID
+   /* Planck keymap definition macro for the 'grid' layout
+    * ,-----------------------------------------------------------------------.
+    * |     |     |     |     |     |     |     |     |     |     |     |     |
+    * |-----------------------------------------------------------------------|
+    * |     |     |     |     |     |     |     |     |     |     |     |     |
+    * |-----------------------------------------------------------------------|
+    * |     |     |     |     |     |     |     |     |     |     |     |     |
+    * |-----------------------------------------------------------------------|
+    * |     |     |     |     |     |     |     |     |     |     |     |     |
+    * `-----------------------------------------------------------------------'
+    */
+#define KEYMAP_GRID( \
+       K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B, \
+       K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B, \
+       K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B, \
+       K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }  \
+}
+#endif
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   /* 0: main layer
+    * ,-----------------------------------------------------------------------.
+    * |Tab  | q   | w   | e   | r   | t   | y   | u   | i   | o   | p   | BS  |
+    * |-----------------------------------------------------------------------|
+    * |Ctrl | a   | s   | d   | f   | g   | h   | j   | k   | l   | ;   | Ret |
+    * |-----------------------------------------------------------------------|
+    * |Shift| z   | x   | c   | v   | b   | n   | m   | [   | (   | {   | <   |
+    * |-----------------------------------------------------------------------|
+    * |Meta | \   | /   | Alt |Lower|Space|Space|Upper|Left |Down | Up  |Right|
+    * `-----------------------------------------------------------------------'
+    */
+  [0] = KEYMAP_GRID(
+       TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+       LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+       RSFT, Z,    X,    C,    V,    B,    N,    M,    LBRC, FN10, FN11, FN12,
+       LGUI, BSLS, SLSH, LALT, FN0,  SPC,  SPC,  FN1,  LEFT, DOWN, UP,   RGHT),
+
+   /* 1: fn left/lower layer
+    * The top row are Visual Studio combos:
+    *   'Run', 'Breakpoint', 'Step over', 'Step into', 'Set cursor to line'
+    * 2nd row are key combos:
+    *   'ctrl-alt-delete', 'ctrl-shift-escape' 
+    * 3rd row are macros keys:
+    *   'P0' - 'P5' execute a script on Windows machines 
+    * ,-----------------------------------------------------------------------.
+    * | ESC | F5   | F9 | F10 | F11 |S+F11|CSF10|NLock|Num7 |Num8 |Num9 | Del |
+    * |-----------------------------------------------------------------------|
+    * |     |C/A/D|C/S/E| Ins |Print|Pause|SLock|Num0 |Num4 |Num5 |Num6 |Num= |
+    * |-----------------------------------------------------------------------|
+    * |     | P0  | P1  | P2  | P3  | P4  | P5  |Num. |Num1 |Num2 |Num3 |Num/ |
+    * |-----------------------------------------------------------------------|
+    * |     |User |     |     |     |     |     |     |Home |PgDn |PgUp | End |
+    * `-----------------------------------------------------------------------'
+    */
+  [1] = KEYMAP_GRID(
+       ESC,  F5,   F9,   F10,  F11,  FN30, FN31, NLCK, P7,   P8,   P9,   DEL,
+       TRNS, FN16, FN17, INS,  PSCR, PAUS, SLCK, P0,   P4,   P5,   P6,   PEQL,
+       TRNS, FN2,  FN3,  FN4,  FN5,  FN6,  FN7,  PDOT, P1,   P2,   P3,   PSLS,
+       TRNS, FN8,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END ),
+
+  /* 2: fn right/raise layer
+    * ,-----------------------------------------------------------------------.
+    * | F1  | F2  | F3  | F4  |F5   | F6  | F7  | F8  | F9  | F10 | F11 | F12 |
+    * |-----------------------------------------------------------------------|
+    * |     | !   | @   | #   | $   | %   | ^   | &   | *   | -   | +   | =   |
+    * |-----------------------------------------------------------------------|
+    * |     | _   | '   | "   | `   | ~   | ,   | .   | ]   | )   | }   | >   |
+    * |-----------------------------------------------------------------------|
+    * |     |NextT|PrevT|     |     |     | Esc |     |Mute |Vol- |Vol+ | P/P |
+    * `-----------------------------------------------------------------------'
+    */
+  [2] = KEYMAP_GRID(
+       F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,
+       TRNS, FN18, FN19, FN20, FN21, FN22, FN23, FN24, FN25, MINS, FN26, PAST,
+       TRNS, FN27, QUOT, FN28, GRV,  FN29, COMM, DOT,  RBRC, FN13, FN14, FN15,
+       TRNS, MNXT, MPRV, TRNS, TRNS, TRNS, ESC,  TRNS, MUTE, VOLD, VOLU, MPLY ),
+};
+
+enum macro_id {
+    M_P0,
+    M_P1,
+    M_P2,
+    M_P3,
+    M_P4,
+    M_P5,
+    M_USERNAME
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0] = ACTION_LAYER_MOMENTARY(1), // left/lower layer
+  [1] = ACTION_LAYER_MOMENTARY(2), // right/raise layer
+  // Program macros
+  [2] = ACTION_MACRO(M_P0),
+  [3] = ACTION_MACRO(M_P1),
+  [4] = ACTION_MACRO(M_P2),
+  [5] = ACTION_MACRO(M_P3),
+  [6] = ACTION_MACRO(M_P4),
+  [7] = ACTION_MACRO(M_P5),
+  [8] = ACTION_MACRO(M_USERNAME),
+  // Braces
+  [10] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // (
+  [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // {
+  [12] = ACTION_MODS_KEY(MOD_LSFT, KC_COMMA), // <
+  [13] = ACTION_MODS_KEY(MOD_LSFT, KC_0),  // )
+  [14] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // {
+  [15] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), // >
+  // Combo
+  [16] = ACTION_MODS_KEY(MOD_LALT | MOD_LCTL, KC_DEL), // Ctrl+Alt+Delete
+  [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_ESC), // Ctrl+Shft+Escape
+  // Symbols
+  [18] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // !
+  [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @
+  [20] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // #
+  [21] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $
+  [22] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // %
+  [23] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^
+  [24] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // &
+  [25] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
+  [26] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + 
+  [27] = ACTION_MODS_KEY(MOD_LSFT, KC_MINUS), // _
+  [28] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOTE), // "
+  [29] = ACTION_MODS_KEY(MOD_LSFT, KC_GRAVE), // ~
+  // Debugging
+  [30] = ACTION_MODS_KEY(MOD_LSFT, KC_F11), // Step into
+  [31] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F10), // Set cursor to line
+ };
+
+// Run a script and pass a key number to it. This is Windows specific and the script needs to be on your path.
+// *open run dialog* keypress.py [PRG_NUM]
+#define ADD_PYTHON_PROGRAM_ON_WIN( PRG_NUM )  MACRO( D(LGUI), T(R), U(LGUI), W(100), T(K), T(E), T(Y), T(P), T(R), T(E), T(S), T(S), T(DOT), T(P), T(Y), T(SPC), T(PRG_NUM), END )
+// *return*
+#define RUN_PYTHON_PROGRAM_ON_WIN MACRO( T(ENT), END )
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    keyevent_t event = record->event;
+    switch (id) {
+        case M_P0:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 0 ) : 
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P1:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 1 ) : 
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P2:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 2 ) : 
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P3:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 3 ) : 
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P4:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 4 ) : 
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P5:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 5 ) : 
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_USERNAME:
+            return event.pressed ?
+                MACRO( T(N), T(A), T(T), T(H), T(A), T(N), T(R), T(O), T(S), T(S), T(P), T(O), T(W), T(E), T(L), T(L), END ) :
+                MACRO_NONE;
+
+    }
+    return MACRO_NONE;
+}
diff --git a/keyboard/planck/keymap_peasant.c b/keyboard/planck/keymap_peasant.c
new file mode 100644
index 0000000000..ddacb614e6
--- /dev/null
+++ b/keyboard/planck/keymap_peasant.c
@@ -0,0 +1,51 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = KEYMAP( /* Native */
+      ESC,     Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    FN2, 
+      BSPC,    A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+      TAB,     Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+      DEL,     LCTL, NO,   LSFT, LALT, SPC,        NO,   LEFT, DOWN, UP,  RGHT), 
+    [1] = KEYMAP( /* QWERTY->PHOTOSHOP */
+      DELETE,  0,    1,    2,    3,    4,    5,    6,    7,    8,    9,    FN1,
+      O,       G,    S,    U,    T,    FN27,  F21,  F10,  F11,  F7,   F8,   F9,
+      TAB,     FN4, FN5,  FN6,  F1,   FN7,  F18,  F19,  F23,  F20,  F22,  FN9,
+      COMM,    DOT,  FN10, FN11, FN3,  SPC,        FN12, F2,   FN8,  F3,   F14),
+    [2] = KEYMAP( /* 2: FN3 PHOTOSHOP */
+      ESC,    FN25, FN26,   NO,   NO,   NO,   NO,   NO,   NO,   NO,   NO,   NO,
+      NO,      NO,   NO,   NO,   NO,   NO,   NO,   NO,   NO,   FN19, FN20, FN21, 
+      C,       NO,  FN22,  FN5,   NO,   FN23, NO,   NO,   NO,   NO,   FN13, NO,
+      FN14,    FN15, FN16, FN17, FN3,   SPC,        FN18, NO,   NO,   F24,  NO),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_DEFAULT_LAYER_SET(0),                             // set Qwerty layout
+    [2] = ACTION_DEFAULT_LAYER_SET(1),                             // set Photoshop presets
+    [3] = ACTION_LAYER_ON_OFF(2),                                  // Photoshop function layer
+ 
+    [4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9),   // photo folder AHK
+    [5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I),              // select inverse
+    [6] = ACTION_MODS_KEY(MOD_LSFT, KC_M),                         // marquee select
+    [7] = ACTION_MODS_KEY(MOD_LALT, KC_BSPC),                      // fill 
+    [8] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_X),    // warp
+    [9] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT | MOD_LSFT, KC_F12),  // merge all new layer
+    [10] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS),                     // zoom out
+    [11] = ACTION_MODS_KEY(MOD_LCTL, KC_H),                        // RBG sliders
+    [12] = ACTION_MODS_KEY(MOD_LCTL, KC_S),                        // save
+    [13] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F5),           // layer mask from transparancy 
+    [14] = ACTION_MODS_KEY(MOD_LALT, KC_LBRC),                     // prev layer
+    [15] = ACTION_MODS_KEY(MOD_LALT, KC_RBRC),                     // next layer
+    [16] = ACTION_MODS_KEY(MOD_LCTL, KC_EQL),                      // zoom in
+    [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_H),             // HSV sliders
+    [18] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F11), // save as PNG
+    [19] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F7),  // gaussian blur
+    [20] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F8),  // motion blur
+    [21] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_X),            // liquify filter
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),                     // prev layer blending
+    [23] = ACTION_MODS_KEY(MOD_LSFT | MOD_LALT, KC_N),             // normal layer blending
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),                      // next layer blending
+    [25] = ACTION_MODS_KEY(MOD_LCTL, KC_Z),                        // step back
+    [26] = ACTION_MODS_KEY(MOD_LCTL, KC_Y),                        // step forward
+    [27] = ACTION_MODS_KEY(MOD_LCTL, KC_R),                        // rasterize
+     
+};
diff --git a/keyboard/planck/keymap_sean.c b/keyboard/planck/keymap_sean.c
new file mode 100644
index 0000000000..9ad572a72c
--- /dev/null
+++ b/keyboard/planck/keymap_sean.c
@@ -0,0 +1,50 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = KEYMAP( /* Matrix Dvorak */
+      QUOT, COMM, DOT,  P,    Y,    SLSH, EQL,  F,    G,    C,    R,   L,
+      A,    O,    E,    U,    I,    ESC,  BSPC, D,    H,    T,    N,   S,
+      SCLN, Q,    J,    K,    X,    TAB,  ENT,  B,    M,    W,    V,   Z,
+      LSFT, LCTL, LALT, LGUI, FN1,  SPC,        FN2,  LEFT, DOWN, UP,  RGHT),
+
+    [1] = KEYMAP( /* Matrix Qwerty */
+      Q,    W,    E,    R,    T,    SLSH, EQL,  Y,    U,    I,    O,    P,
+      A,    S,    D,    F,    G,    ESC,  BSPC, H,    J,    K,    L,    SCLN,
+      Z,    X,    C,    V,    B,    TAB,  ENT,  N,    M,    COMM, DOT,  SLSH,
+      LSFT, LCTL, LALT, LGUI, FN1,  SPC,        FN2,  LEFT, DOWN, UP,  RGHT),
+      
+    [2] = KEYMAP( /* fn1 lower */
+      F1,   F2,   F3,   F4,   F5,   TRNS, TRNS, F6,   F7,   F8,   F9,   F10,
+      1,    2,    3,    4,    5,    ESC,  DEL,  6,    7,    8,    9,    0,
+      FN3,  FN4,  TRNS,   GRV,  MINS, TRNS, TRNS, BSLS, LBRC, RBRC, TRNS, TRNS,
+      TRNS, TRNS, TRNS, TRNS, FN1,  TRNS,       TRNS, HOME, PGDN, PGUP, END),
+
+    [3] = KEYMAP( /* fn2 raise */
+      F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,
+      FN10, FN11, FN12, FN13, FN14, ESC,  DEL,  FN15, FN16, FN17, FN18, FN19,
+      FN3,  FN4,  TRNS,   FN22, FN20, TRNS, TRNS, FN28, FN23, FN24, TRNS, TRNS,
+      TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       FN2,  MNXT, VOLD, VOLU, MPLY),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay 
+    [3] = ACTION_DEFAULT_LAYER_SET(0), 
+    [4] = ACTION_DEFAULT_LAYER_SET(1),  
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+};
\ No newline at end of file
diff --git a/keyboard/planck/keymap_shane.c b/keyboard/planck/keymap_shane.c
new file mode 100644
index 0000000000..d4e40fe63a
--- /dev/null
+++ b/keyboard/planck/keymap_shane.c
@@ -0,0 +1,100 @@
+// https://github.com/shanecelis/tmk_keyboard/blob/master/keyboard/planck/keymap_shane.c
+
+#include "keymap_common.h"
+#include "action_layer.h"
+#include "action.h"
+#include "action_util.h"
+
+/*
+  Shane's Planck Layout
+  http://www.keyboard-layout-editor.com/#/layouts/015d9011102619d7695c86ffe57cf441
+*/
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP_AND_SWAP( /* Base */
+    TAB,	Q,	W,	E,	R,	T,	Y,	U,	I,	O,	P,	MINS,
+    LCTL,	A,	S,	D,	F,	G,	H,	J,	K,	L,	SCLN,	BSPC,
+    LSFT,	Z,	X,	C,	V,	B,	N,	M,	COMM,	DOT,	SLSH,	FN5,
+    /*ALPHA*/FN3,	/*HYPER*/	/*SUPER*/LGUI, /*META*/LALT, LCTL,	FN2,	FN6,	FN1,	LEFT,	DOWN,	UP,	RGHT),
+  [2] = KEYMAP_AND_SWAP( /* More modifiers */
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS, RCTL, RALT, RGUI,	TRNS),
+  [4] = KEYMAP_AND_SWAP( /* WASD */
+    TRNS,	TRNS,	UP,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	LEFT,	DOWN,	RIGHT,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS, TRNS, TRNS, TRNS, TRNS),
+  [6] = KEYMAP_AND_SWAP( /* Raise/FN1 */
+    FN23,	1,	2,	3,	4,	5,	6,	7,	8,	9,	0,	EQL,
+    TRNS,	F1,	F2,	F3,	F4,	F5,	F6,	F7,	F8,	F9,	F10,	ENT,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	BSLS,	TRNS,
+    PAUS,	TRNS,	TRNS,	TRNS,	TRNS,	BSPC,	TRNS,	MUTE,	PGUP,	PGDN,	MNXT),
+  [8] = KEYMAP_AND_SWAP( /* Lower/FN2 */
+    ESC,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	FN19,	FN20,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	CAPS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	QUOT,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	FN24,	FN25,	LBRC,	RBRC,	TRNS,	TRNS,
+    FN4,	TRNS,	TRNS,	TRNS,	TRNS,	ENT,	TRNS,	MPLY,	VOLD,	VOLU,	MPRV),
+};
+
+enum function_id {
+  SPACE_FN,
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch (id) {
+  case SPACE_FN:
+    if (record->event.pressed) {
+      // Change the keyboard maps.
+      // Whatever even layer's are on, turn on the odd one's too.
+      for (uint8_t i = 0; i < 9; i += 2) {
+        if (layer_state & (1UL << i))
+          layer_on(i + 1);
+      }
+      layer_on(1);
+    } else {
+      // turn off all the even layers.
+      for (uint8_t i = 0; i < 9; i += 2)
+        layer_off(i + 1);
+
+      if (record->tap.count != 0) {
+        // Space was tapped rather than used like a modifier.
+        // So send a space up and down event.
+        add_key(KC_SPC);
+        send_keyboard_report();
+        del_key(KC_SPC);
+        send_keyboard_report();
+      }
+    }
+    break;
+  }
+}
+
+
+
+const uint16_t PROGMEM fn_actions[] = {
+  [1] = ACTION_LAYER_MOMENTARY(6),  // to fist Fn overlay
+  [2] = ACTION_LAYER_MOMENTARY(8),  // to second Fn overlay
+  [3] = ACTION_LAYER_TOGGLE(2), // toggle more modifiers
+  [4] = ACTION_LAYER_TOGGLE(4), // toggle wasd
+  [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+  [6] = ACTION_FUNCTION_TAP(SPACE_FN),
+
+  [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+  [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+  [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+  [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+  [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+  [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+  [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+  [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+  [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+  [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+  [21] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+  [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+  [23] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+  [24] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+  [25] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+  [26] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+};
diff --git a/keyboard/planck/keymap_simon.c b/keyboard/planck/keymap_simon.c
new file mode 100644
index 0000000000..37951364be
--- /dev/null
+++ b/keyboard/planck/keymap_simon.c
@@ -0,0 +1,44 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Jack */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    DOT,  ENT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SCLN, DEL,
+  LCTL, ENT,  LALT, CAPS, FN2,    SPC,      FN1,  LEFT, DOWN, UP,   RGHT),
+[1] = KEYMAP( /* Jack RAISE */
+  TRNS, F1,   F2,   F3,   F4,   NO,   FN11, FN9,  FN12, NO,   FN14, TRNS,
+  TRNS, F5,   F6,   F7,   F8,   FN16, SLSH, MINS, EQL,  LBRC, FN8,  TRNS,
+  TRNS, F9,   F10,  F11,  F12,  F15,  F16,  FN22, SCLN, MINS, QUOT, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,    TRNS, TRNS, TRNS, TRNS, TRNS),
+[2] = KEYMAP( /* Jack LOWER */
+  FN22, 1,    2,    3,   FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
+  TRNS, 4,    5,    6,   TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+  TRNS, 7,    8,    9,   0,    FN28, FN15,   F7,   F8,   F9,   F10,  TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,    TRNS, TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+
+    [8]  = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH),
+    [9]  = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT),
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};
diff --git a/keyboard/planck/keymap_wilba.c b/keyboard/planck/keymap_wilba.c
new file mode 100644
index 0000000000..9781f8fcd8
--- /dev/null
+++ b/keyboard/planck/keymap_wilba.c
@@ -0,0 +1,56 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Wilba */
+  FN27, FN28, FN29, E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+  LCTL, LGUI, LALT, RSFT, FN1,  SPC,        FN2,  LEFT, DOWN, UP,   RGHT),
+[1] = KEYMAP( /* Wilba Alternate */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+  LCTL, LGUI, LALT, RSFT, FN1,  SPC,        FN2,  LEFT, DOWN, UP,   RGHT),
+[2] = KEYMAP( /* Wilba LOWER */
+  TRNS, 1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    TRNS,
+  TRNS, F11,  F12,  LBRC, RBRC, FN20, EQL,  FN23, FN24, MINS, FN21, TRNS,
+  TRNS, BSLS, GRV,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, FN1,  TRNS,       TRNS, MNXT, VOLD, VOLU, MPLY),
+[3] = KEYMAP( /* Wilba RAISE */
+  TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS,
+  TRNS, F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  TRNS,  
+  TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       FN2,  TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // LOWER
+    [2] = ACTION_LAYER_MOMENTARY(3),  // RAISE
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),  
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // !
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // #
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // %
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // &
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // (
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // )
+    
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // +
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // {
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // }
+    [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // |
+
+    [26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+    
+    [27] = ACTION_BACKLIGHT_TOGGLE(),
+    [28] = ACTION_BACKLIGHT_INCREASE(),
+    [29] = ACTION_BACKLIGHT_DECREASE()
+    
+};
diff --git a/keyboard/planck/led.c b/keyboard/planck/led.c
new file mode 100644
index 0000000000..1f36434883
--- /dev/null
+++ b/keyboard/planck/led.c
@@ -0,0 +1,38 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    // Using PE6 Caps Lock LED
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+    {
+        // Output high.
+        DDRE |= (1<<6);
+        PORTE |= (1<<6);
+    }
+    else
+    {
+        // Output low.
+        DDRE &= ~(1<<6);
+        PORTE &= ~(1<<6);
+    }
+}
diff --git a/keyboard/planck/matrix-handwire.c b/keyboard/planck/matrix-handwire.c
new file mode 100644
index 0000000000..2f2dbdb108
--- /dev/null
+++ b/keyboard/planck/matrix-handwire.c
@@ -0,0 +1,193 @@
+/*
+Copyright 2012 Jun Wako 
+Generated by planckkeyboard.com (2014 Jack Humbert)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void init_cols(void)
+{
+    DDRB &= ~(1<<6 | 1<<5 | 1<<4);
+    PORTB |= (1<<6 | 1<<5 | 1<<4);
+    DDRD &= ~(1<<7 | 1<<6 | 1<<4);
+    PORTD |= (1<<7 | 1<<6 | 1<<4);
+    DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    
+}
+
+static matrix_row_t read_cols(void)
+{
+  return (PIND&(1<<4) ? 0 : (1<<0)) |
+         (PIND&(1<<6) ? 0 : (1<<1)) |
+         (PIND&(1<<7) ? 0 : (1<<2)) |
+         (PINB&(1<<4) ? 0 : (1<<3)) |
+         (PINB&(1<<5) ? 0 : (1<<4)) |
+         (PINB&(1<<6) ? 0 : (1<<5)) |
+         (PINF&(1<<7) ? 0 : (1<<6)) |
+         (PINF&(1<<6) ? 0 : (1<<7)) |
+         (PINF&(1<<5) ? 0 : (1<<8)) |
+         (PINF&(1<<4) ? 0 : (1<<9)) |
+         (PINF&(1<<1) ? 0 : (1<<10)) |
+         (PINF&(1<<0) ? 0 : (1<<11));
+         
+}
+
+static void unselect_rows(void)
+{
+    DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
+    PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3);
+    
+}
+
+static void select_row(uint8_t row)
+{
+    switch (row) {
+        case 0:
+            DDRB  |= (1<<0);
+            PORTB &= ~(1<<0);
+            break;
+        case 1:
+            DDRB  |= (1<<1);
+            PORTB &= ~(1<<1);
+            break;
+        case 2:
+            DDRB  |= (1<<2);
+            PORTB &= ~(1<<2);
+            break;
+        case 3:
+            DDRB  |= (1<<3);
+            PORTB &= ~(1<<3);
+            break;
+        
+    }
+}
diff --git a/keyboard/planck/matrix.c b/keyboard/planck/matrix.c
new file mode 100644
index 0000000000..e3926caece
--- /dev/null
+++ b/keyboard/planck/matrix.c
@@ -0,0 +1,219 @@
+/*
+Copyright 2012 Jun Wako 
+Generated by planckkeyboard.com (2014 Jack Humbert)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "backlight.h" // TODO fix this dependency 
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+
+    // TODO fix this dependency 
+    backlight_init_ports();
+    
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+//
+// Planck PCB Rev 1 Pin Assignments
+//
+// Column: 0,  1,  2,  3,  4,  5,  6,  7,  8,  9,  10, 11
+// Pin:    F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7
+//
+
+static void init_cols(void)
+{
+    DDRB &= ~(1<<4 | 1<<0);
+    PORTB |= (1<<4 | 1<<0);
+    DDRC &= ~(1<<7);
+    PORTC |= (1<<7);
+    DDRD &= ~(1<<7 | 1<<6 | 1<<4);
+    PORTD |= (1<<7 | 1<<6 | 1<<4);
+    DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    
+}
+
+static matrix_row_t read_cols(void)
+{
+  return (PINF&(1<<1) ? 0 : (1<<0)) |
+         (PINF&(1<<0) ? 0 : (1<<1)) |
+         (PINB&(1<<0) ? 0 : (1<<2)) |
+         (PINC&(1<<7) ? 0 : (1<<3)) |
+         (PINF&(1<<4) ? 0 : (1<<4)) |
+         (PINF&(1<<5) ? 0 : (1<<5)) |
+         (PINF&(1<<6) ? 0 : (1<<6)) |
+         (PINF&(1<<7) ? 0 : (1<<7)) |
+         (PIND&(1<<4) ? 0 : (1<<8)) |
+         (PIND&(1<<6) ? 0 : (1<<9)) |
+         (PINB&(1<<4) ? 0 : (1<<10)) |
+         (PIND&(1<<7) ? 0 : (1<<11));
+         
+}
+
+static void unselect_rows(void)
+{
+    DDRB &= ~(1<<5 | 1<<6);
+    PORTB |= (1<<5 | 1<<6);
+    DDRD &= ~(1<<0 | 1<<5);
+    PORTD |= (1<<0 | 1<<5);
+    
+}
+
+//
+// Planck PCB Rev 1 Pin Assignments
+//
+// Row: 0,  1,  2,  3
+// Pin: D0, D5, B5, B6
+//
+
+static void select_row(uint8_t row)
+{
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 1:
+            DDRD  |= (1<<5);
+            PORTD &= ~(1<<5);
+            break;
+        case 2:
+            DDRB  |= (1<<5);
+            PORTB &= ~(1<<5);
+            break;
+        case 3:
+            DDRB  |= (1<<6);
+            PORTB &= ~(1<<6);
+            break;
+        
+    }
+}
\ No newline at end of file