Merge remote-tracking branch 'remotes/jackhumbert/master'

9 files changed, 0 insertions, 732 deletions

diff --git a/keyboard/IIgs/Makefile b/keyboard/IIgs/Makefile
deleted file mode 100644
index 3bf380e64b..0000000000
--- a/keyboard/IIgs/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = IIgs_Standard
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	keymap.c \
-	matrix.c \
-	led.c 
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-#MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-MOUSEKEY_ENABLE = no	# Mouse keys
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/keyboard/IIgs/README b/keyboard/IIgs/README
deleted file mode 100644
index 820d771102..0000000000
--- a/keyboard/IIgs/README
+++ /dev/null
@@ -1,45 +0,0 @@
-Replaceable USB Controller for Apple IIgs/Standard(M0116)

-JeffreySung(nattyman@gmail.com)

-

-===============================

-

-Feature

--------

-- Replaceable keyboard controller for Apple IIgs(A9M0330)/Standard(M0116)

-- Teensy++ 2.0 required

-- Some signal bypass required

-- ADB keyboard doesn't use matrix for modifier keys. With virtual row for modifier keys, 

-  these keys are merged into key matrix using virtual row.

-  

-History

-=======

-- 2012.09.17 First Release

-- 2012.09.17 CapsLock support

-- 2012.09.19 Power button added

-Build

-=====

-0. Just Type "Make" and return.

-

-Hardware

-========

-PJRC Teensy

------------

-0. The following ports should not be connected to board.

-   From top view of Teensy++, from GND and counter clock wise.

-    -7,26(in keyboard PCB, these pins are VDD,GND)

-	-30,31(in Teensy++, these pins are Ref,GND respectively)

-	-5,6(D2,D3  for bluetooth in future)

-1. Bypass #31 pin(from board) to E4(Teensy)

-2. Bypass #30 pin(from board) to F2(Teensy)

-3. Bypass #6  pin(from board) to A0(Teensy)

-4. Refer to documentation directory

-

-To Do

-=====

-0. When DEBOUNCE defined, there is a errors.

-1. Layer Change by toggling Clear Key

-2. Eject Key add. (following files should be modified.)

-		common/keycode.h

-		common/keyboard.c

-3. Use bluetooth

-EOF

diff --git a/keyboard/IIgs/config.h b/keyboard/IIgs/config.h
deleted file mode 100644
index bc8bf75f94..0000000000
--- a/keyboard/IIgs/config.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*

-Copyright 2011 Jun Wako <wakojun@gmail.com>

-

-This program is free software: you can redistribute it and/or modify

-it under the terms of the GNU General Public License as published by

-the Free Software Foundation, either version 2 of the License, or

-(at your option) any later version.

-

-This program is distributed in the hope that it will be useful,

-but WITHOUT ANY WARRANTY; without even the implied warranty of

-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-GNU General Public License for more details.

-

-You should have received a copy of the GNU General Public License

-along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-#ifndef CONFIG_H

-#define CONFIG_H

-

-

-/* USB Device descriptor parameter */

-/* for Apple 

-#define VENDOR_ID       0x05AC

-#define PRODUCT_ID      0xBEE0

-*/

-#define VENDOR_ID       0xFEED

-#define PRODUCT_ID      0xBEE0

-#define DEVICE_VER      0x0202

-#define MANUFACTURER    t.m.k.

-#define PRODUCT         Apple Desktop Bus Keyboard

-

-

-/* message strings */

-#define DESCRIPTION     Apple M0116/A9M0660 keyboard firmware

-

-

-/* matrix size */

-#define MATRIX_ROWS 11	// last row is virtual for modifier

-#define MATRIX_COLS 8

-/* define if matrix has ghost */

-#define MATRIX_HAS_GHOST

-/* Set 0 if need no debouncing */

-#define DEBOUNCE    5

-

-

-/* key combination for command */

-#define IS_COMMAND() ( \

-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \

-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \

-)

-

-

-/* layer switching */

-#define LAYER_SWITCH_DELAY 100

-#define LAYER_SEND_FN_TERM 300

-

-

-/* legacy keymap support */

-#define USE_LEGACY_KEYMAP

-

-

-#endif

diff --git a/keyboard/IIgs/doc/PIN_BYPASS.jpg b/keyboard/IIgs/doc/PIN_BYPASS.jpg
deleted file mode 100644
index 2998f0c3f8..0000000000
--- a/keyboard/IIgs/doc/PIN_BYPASS.jpg
+++ /dev/null
diff --git a/keyboard/IIgs/doc/Teensy++_Mod.jpg b/keyboard/IIgs/doc/Teensy++_Mod.jpg
deleted file mode 100644
index 146c1ab93c..0000000000
--- a/keyboard/IIgs/doc/Teensy++_Mod.jpg
+++ /dev/null
diff --git a/keyboard/IIgs/hid_listen.mac b/keyboard/IIgs/hid_listen.mac
deleted file mode 100755
index 8758fdf886..0000000000
--- a/keyboard/IIgs/hid_listen.mac
+++ /dev/null
diff --git a/keyboard/IIgs/keymap.c b/keyboard/IIgs/keymap.c
deleted file mode 100644
index cd33e223ac..0000000000
--- a/keyboard/IIgs/keymap.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*

-Copyright 2012 Jeffrey Sung <nattyman@gmail.com>

-

-This program is free software: you can redistribute it and/or modify

-it under the terms of the GNU General Public License as published by

-the Free Software Foundation, either version 2 of the License, or

-(at your option) any later version.

-

-This program is distributed in the hope that it will be useful,

-but WITHOUT ANY WARRANTY; without even the implied warranty of

-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-GNU General Public License for more details.

-

-You should have received a copy of the GNU General Public License

-along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/* 

- * Keymap for Apple IIgs/Standard Keyboard

- */

-#include <stdint.h>

-#include <stdbool.h>

-#include <avr/pgmspace.h>

-#include "keycode.h"

-#include "print.h"

-#include "debug.h"

-#include "util.h"

-#include "keymap.h"

-

-

-// Convert physical keyboard layout to matrix array.

-// This is a macro to define keymap easily in keyboard layout form.

-#define KEYMAP( R10C5, \

-    R3C7, R3C6, R3C5, R3C4, R3C3, R3C2, R3C1, R8C1, R8C0, R3C0, R0C0, R0C1, R0C2, R0C3, R4C4, R4C5, R4C6, R4C7, \

-    R9C7, R9C6, R9C5, R9C4, R9C3, R9C2, R9C1, R9C0, R1C0, R1C1, R1C2, R1C3, R1C4,       R2C4, R2C5, R2C6, R2C3, \

-    R10C0,R7C7, R7C6, R7C5, R7C4, R7C3, R7C2, R7C1, R7C0, R0C4, R1C6, R1C7, R1C5,       R2C0, R2C1, R2C2, R2C7, \

-    R10C1,R6C7, R6C6, R6C5, R6C4, R6C3, R6C2, R6C1, R6C0, R0C5, R0C6, 					R4C0, R4C1, R4C2, \

-    R10C4,R10C2,R10C3,R5C4, R5C7, R5C5, R5C6, R5C0, R5C2, R0C7,							R5C1, R5C3, R4C3 \

-) { \

-    { R0C0, R0C1,  R0C2,  R0C3,  R0C4, R0C5,  R0C6,  R0C7 }, \

-    { R1C0, R1C1,  R1C2,  R1C3,  R1C4, R1C5,  R1C6,  R1C7 }, \

-    { R2C0, R2C1,  R2C2,  R2C3,  R2C4, R2C5,  R2C6,  R2C7 }, \

-    { R3C0, R3C1,  R3C2,  R3C3,  R3C4, R3C5,  R3C6,  R3C7 }, \

-    { R4C0, R4C1,  R4C2,  R4C3,  R4C4, R4C5,  R4C6,  R4C7 }, \

-    { R5C0, R5C1,  R5C2,  R5C3,  R5C4, R5C5,  R5C6,  R5C7 }, \

-    { R6C0, R6C1,  R6C2,  R6C3,  R6C4, R6C5,  R6C6,  R6C7 }, \

-    { R7C0, R7C1,  R7C2,  R7C3,  R7C4, R7C5,  R7C6,  R7C7 }, \

-    { R8C0, R8C1,  KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, KC_NO }, \

-    { R9C0, R9C1,  R9C2,  R9C3,  R9C4, R9C5,  R9C6,  R9C7 }, \

-	{ R10C0,R10C1, R10C2, R10C3, R10C4,R10C5, KC_NO, KC_NO} \

-}

-

-#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))

-

-

-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.

-static const uint8_t PROGMEM fn_layer[] = {

-    0,              // Fn0

-    1,              // Fn1

-    2,              // Fn2

-    3,              // Fn3

-    4,              // Fn4

-    0,              // Fn5

-    3,              // Fn6

-    3               // Fn7

-};

-

-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.

-// See layer.c for details.

-static const uint8_t PROGMEM fn_keycode[] = {

-    KC_NO,          // Fn0

-    KC_NO,          // Fn1

-    KC_SLSH,        // Fn2

-    KC_SCLN,        // Fn3

-    KC_SPC,         // Fn4

-    KC_NO,          // Fn5

-    KC_NO,          // Fn6

-    KC_NO           // Fn7

-};

-

-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

-    /* Layer 0: Default Layer

-     * ,-----------------------------------------------------------. ,---------------,

-     * |                    POWER                                  | |               |  

-     * |-----------------------------------------------------------| |---------------|

-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |FN0| = | / | * |

-     * |-----------------------------------------------------------| |---------------|

-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     | | 7 | 8 | 9 | + |

-     * |-----------------------------------------------------'     | |---------------|

-     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  | | 4 | 5 | 6 | - |

-     * |-----------------------------------------------------------| |---------------|

-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|   /   |Shift | | 1 | 2 | 3 | E |

-     * |-----------------------------------------------------------| |-----------| N |

-     * |CAPS|Alt |Gui  |`  |SPC               |BSLS  |LFT|RGT|DN|UP| |   0   | . | T |

-     * `-----------------------------------------------------------' |---------------'

-     */

-    KEYMAP(							KC_PWR,

-		   KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,    KC_MINS,KC_EQL, KC_BSPC,	KC_FN1, KC_PEQL, KC_PSLS,  KC_PAST, \

-           KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,    KC_LBRC,KC_RBRC,			KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \

-           KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN, KC_QUOT,KC_ENT,				KC_P4,   KC_P5,   KC_P6,   KC_PMNS, \

-           KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,								KC_P1,   KC_P2,   KC_P3, \

-           KC_CAPS,KC_LALT,KC_LGUI,KC_GRV, KC_SPC, KC_BSLS,KC_LEFT,KC_RGHT,KC_DOWN,KC_UP,										KC_P0,   KC_PDOT, KC_PENT),

-

-

-    /* Layer 1: Tenkey use Layer

-     * ,-----------------------------------------------------------. ,---------------,

-     * |                    POWER                                  | |               |  

-     * |-----------------------------------------------------------| |---------------|

-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NLK| = | / | * |

-     * |-----------------------------------------------------------| |---------------|

-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     | |INS| 8 |PGU|V+ |

-     * |-----------------------------------------------------'     | |---------------|

-     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  | |DEL|UP |PGD|V- |

-     * |-----------------------------------------------------------| |---------------|

-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|   /   |Shift | |LFT|DN |RGT| E |

-     * |-----------------------------------------------------------| |-----------| N |

-     * |CAPS|Alt |Gui  |`  |SPC               |BSLS  |LFT|RGT|DN|UP| |   0   | . | T |

-     * `-----------------------------------------------------------' `---------------'

-     */

-    KEYMAP(						KC_PWR, \

-		   KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,    KC_MINS,KC_EQL, KC_BSPC, KC_FN1,   KC_PEQL, KC_PSLS, KC_MUTE, \

-           KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,    KC_LBRC,KC_RBRC,         KC_INS,   KC_P8,   KC_PGUP,   KC_VOLU, \

-           KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN, KC_QUOT,KC_ENT,          KC_DEL,   KC_UP,   KC_PGDN,   KC_VOLD, \

-           KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH, 						 KC_LEFT,  KC_DOWN,   KC_RIGHT, \

-           KC_CAPS,KC_LALT,KC_LGUI,KC_GRV, KC_SPC, KC_BSLS,KC_LEFT,KC_RGHT,KC_DOWN,KC_UP,                                    KC_P0,    KC_PDOT, KC_PENT),

-};

-

-

-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)

-{

-    return KEYCODE(layer, row, col);

-}

-

-uint8_t keymap_fn_layer(uint8_t index)

-{

-    return pgm_read_byte(&fn_layer[index]);

-}

-

-uint8_t keymap_fn_keycode(uint8_t index)

-{

-    return pgm_read_byte(&fn_keycode[index]);

-}

diff --git a/keyboard/IIgs/led.c b/keyboard/IIgs/led.c
deleted file mode 100644
index f76545f0ba..0000000000
--- a/keyboard/IIgs/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-}
diff --git a/keyboard/IIgs/matrix.c b/keyboard/IIgs/matrix.c
deleted file mode 100644
index 6ca55b7ea2..0000000000
--- a/keyboard/IIgs/matrix.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "led.h"
-
-
-#if (MATRIX_COLS > 16)
-#   error "MATRIX_COLS must not exceed 16"
-#endif
-#if (MATRIX_ROWS > 255)
-#   error "MATRIX_ROWS must not exceed 255"
-#endif
-
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE	0
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-// matrix state buffer(1:on, 0:off)
-#if (MATRIX_COLS <= 8)
-static uint8_t *matrix;
-static uint8_t *matrix_prev;
-static uint8_t _matrix0[MATRIX_ROWS];
-static uint8_t _matrix1[MATRIX_ROWS];
-#else
-static uint16_t *matrix;
-static uint16_t *matrix_prev;
-static uint16_t _matrix0[MATRIX_ROWS];
-static uint16_t _matrix1[MATRIX_ROWS];
-#endif
-
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-static uint8_t read_col(uint8_t row);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    // Input with pull-up(DDR:0, PORT:1)
-	// Column C1 ~ C7 (PortC0-6)
-	// Column C0(Port E1)
-    DDRC &= ~0b01111111;
-    PORTC |= 0b01111111;
-    DDRE &= ~0b00000010;
-    PORTE |= 0b00000010;
-	//DDRB &= ~0b00000100;
-	//PORTB |= 0b00000100;
-	// modifier	B3/4,F4/5,E4	always input
-	// 			A0
-    //DDRA |=  0b00000001;
-    //PORTA &= 0b00000001;
-    //DDRB |=  0b00011000;
-    //PORTB &= 0b00011000;
-    //DDRF |= ~0b00110000;
-    //PORTF &= 0b00110000;
-    //DDRB &= ~0b00011000;
-    //PORTB |= 0b00011000;
-    //DDRF &= ~0b00110000;
-    //PORTF |= 0b00110000;
-    //DDRE &= ~0b00010000;
-    //PORTE |= 0b00010000;
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
-    matrix = _matrix0;
-    matrix_prev = _matrix1;
-}
-
-uint8_t matrix_scan(void)
-{
-    if (!debouncing) {
-        uint8_t *tmp = matrix_prev;
-        matrix_prev = matrix;
-        matrix = tmp;
-    }
-
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        unselect_rows();
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-		if ( i == ( MATRIX_ROWS - 1 ) ) {							// CHECK CAPS LOCK
-       		if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {		// CAPS LOCK is ON on HOST
-				if ( ~read_col(i) & (1<< 4) ) { 							// CAPS LOCK is still DOWN ( 0bXXX1_XXXX)	
-					matrix[i]        = ~read_col(i) & 0b11101111;				// change CAPS LOCK as released
-				} else {													// CAPS LOCK in UP
-					matrix[i] = ~read_col(i) | 0b00010000;						// send fake caps lock down
-				}
-			} else {													// CAPS LOCK is OFF on HOST
-        		if (matrix[i] != (uint8_t)~read_col(i)) {
-           			matrix[i] = (uint8_t)~read_col(i);
-        			if (debouncing) {
-        				debug("bounce!: "); debug_hex(debouncing); print("\n");
-					}
-       				debouncing = DEBOUNCE;
-				}
-			}
-		} else {
-        	if (matrix[i] != (uint8_t)~read_col(i)) {
-           		matrix[i] = (uint8_t)~read_col(i);
-        		if (debouncing) {
-        			debug("bounce!: "); debug_hex(debouncing); print("\n");
-				}
-       			debouncing = DEBOUNCE;
-			}
-		}
-	}
-    unselect_rows();
-
-    if (debouncing) {
-        debouncing--;
-    }
-
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        if (matrix[i] != matrix_prev[i]) {
-            return true;
-        }
-    }
-    return false;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        if (matrix_has_ghost_in_row(i))
-            return true;
-    }
-#endif
-    return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-//	if ( row == ( MATRIX_ROWS - 1 ) && col == 4) {							// CHECK CAPS LOCK
-//    	if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {		// CAPS LOCK is ON on HOST
-//			if ((matrix_prev[row] & 0b00010000) && (~matrix[row] & 0b00010000)) {
-//				debug("CapsLock Reverse:");debug_hex(matrix[row]);
-//				matrix[row] |= 0b00010000;
-//				matrix_prev[row] &= ~0b00010000;
-//				debug("->");debug_hex(matrix[row]);debug("\n");
-//			}
-//		} 
-//	}
-   	return (matrix[row] & (1<<col));
-}
-
-inline
-#if (MATRIX_COLS <= 8)
-uint8_t matrix_get_row(uint8_t row)
-#else
-uint16_t matrix_get_row(uint8_t row)
-#endif
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < matrix_rows(); row++) {
-        phex(row); print(": ");
-#if (MATRIX_COLS <= 8)
-        pbin_reverse(matrix_get_row(row));
-#else
-        pbin_reverse16(matrix_get_row(row));
-#endif
-#ifdef MATRIX_HAS_GHOST
-        if (matrix_has_ghost_in_row(row)) {
-            print(" <ghost");
-        }
-#endif
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-#if (MATRIX_COLS <= 8)
-        count += bitpop(matrix[i]);
-#else
-        count += bitpop16(matrix[i]);
-#endif
-    }
-    return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
-    // no ghost exists in case less than 2 keys on
-    if (((matrix[row] - 1) & matrix[row]) == 0)
-        return false;
-
-    // ghost exists in case same state as other row
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
-            return true;
-    }
-    return false;
-}
-#endif
-
-inline
-static uint8_t read_col(uint8_t row)
-{
-	// For normal 	: Column C1 ~ C7 (PortC0-6), C0(Port E1)
-	// For modifier	: B3(CNTRL)/4(SHIFT),F4(CMD/GUI)/5(OPTION,ALT)
-	// Modifier would be copied to report->mods except E4(CAPSLOCK)
-	uint8_t tmp;
-	if ( row == 10 ) {
-		tmp = 0xC0;
-		tmp |= (PINB >> 3 ) & 0b00000011;	// LEFT CTRL  is 0bit in modifier (HID Spec)
-											// LEFT SHIFT is 1bit in modifier (HID Spec)
-		tmp |= (PINF >> 3 ) & 0b00000100;	// LEFT ALT   is 2bit in modifier (HID Spec)
-		tmp |= (PINF >> 1 ) & 0b00001000;	// LEFT GUI   is 3bit in modifier (HID Spec)
-		tmp |= (PINA << 4 ) & 0b00010000;	// CAPSLOCK
-		tmp |= (PINB << 3 ) & 0b00100000;	// POWER 	 
-	} else {
-		tmp = 0x00;
-		tmp = (PINE >> 1)&0b00000001; 
-		tmp |= PINC << 1 ;
-	}
-	return tmp;
-}
-
-inline
-static void unselect_rows(void)
-{
-    // Hi-Z(DDR:0, PORT:0) to unselect
-	// DDR : 1, output	0, input
-    DDRB  &= ~0b00000011; // PB: 1,0  
-    PORTB &= ~0b00000011;
-    DDRD  &= ~0b00010000; // PD: 4
-    PORTD &= ~0b00010000;
-    DDRE  &= ~0b11000000; // PE: 7,6
-    PORTE &= ~0b11000000;
-    DDRF  &= ~0b11000111; // PF: 7,6,2,1,0 
-    PORTF &= ~0b11000111;
-	// to unselect virtual row(modifier), set port to output with low
-    DDRA  |=  0b00000001; // PA: 0 for CAPSLOCK
-    PORTA &= ~0b00000001;
-    DDRB  |=  0b00011100; // PB: 3,4 for modifier(row10)
-    PORTB &= ~0b00011100; // PB: 2 for power
-    DDRF  |=  0b00110000; // PF: 4,5 for modifier
-    PORTF &= ~0b00110000;
-}
-
-inline
-static void select_row(uint8_t row)
-{
-    // Output low(DDR:1, PORT:0) to select
-	// with row enable, column could send low to AVR when pressed
-    // row: 0    1    2    3    4    5    6    7    8    9
-    // pin: PB1, PB0, PE7, PE6, PD4, PF2, PF0, PF1, PF6  PF7
-    switch (row) {
-        case 0:
-            DDRB  |= (1<<1);
-            PORTB &= ~(1<<1);
-            break;
-        case 1:
-            DDRB  |= (1<<0);
-            PORTB &= ~(1<<0);
-            break;
-        case 2:
-            DDRE  |= (1<<7);
-            PORTE &= ~(1<<7);
-            break;
-        case 3:
-            DDRE  |= (1<<6);
-            PORTE &= ~(1<<6);
-            break;
-        case 4:
-            DDRD  |= (1<<4);
-            PORTD &= ~(1<<4);
-            break;
-        case 5:
-            DDRF  |= (1<<2);
-            PORTF &= ~(1<<2);
-            break;
-        case 6:
-            DDRF  |= (1<<0);
-            PORTF &= ~(1<<0);
-            break;
-        case 7:
-            DDRF  |= (1<<1);
-            PORTF &= ~(1<<1);
-            break;
-        case 8:
-            DDRF  |= (1<<6);
-            PORTF &= ~(1<<6);
-            break;
-        case 9:
-            DDRF  |= (1<<7);
-            PORTF &= ~(1<<7);
-            break;
-		case 10:
-			// modifier has no row enable
-			// to select virtual row, set port as input
-		    DDRA &= ~0b00000001;
-		    PORTA |= 0b00000001;
-		    DDRB &= ~0b00011100;
-		    PORTB |= 0b00011100;
-		    DDRF &= ~0b00110000;
-		    PORTF |= 0b00110000;
-            break;
-
-    }
-}