Purge uGFX. (#14720)

* Purge uGFX.

* Remove remnants of visualizer.

* Remove remnants of uGFX.

5 files changed, 0 insertions, 479 deletions

diff --git a/drivers/ugfx/gdisp/st7565/board_st7565_template.h b/drivers/ugfx/gdisp/st7565/board_st7565_template.h
deleted file mode 100644
index 875ed9e65c..0000000000
--- a/drivers/ugfx/gdisp/st7565/board_st7565_template.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#include "quantum.h"
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0, 1, 2, 3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
- */
-
-#define ST7565_A0_PIN C7
-#define ST7565_RST_PIN C8
-#define ST7565_MOSI_PIN C6
-#define ST7565_SCLK_PIN C5
-#define ST7565_SS_PIN C4
-
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
-    // Operation complete callback or @p NULL.
-    .end_cb = NULL,
-    // The chip select line port - when not using pcs.
-    .ssport = PAL_PORT(ST7565_SS_PIN),
-    // brief The chip select line pad number - when not using pcs.
-    .sspad = PAL_PAD(ST7565_SS_PIN),
-    // SPI initialization data.
-    .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
-            | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
-            | SPIx_CTARn_DT(0)     // Delay After Transfer Scaler (no minimum)= 27.78ns
-            | SPIx_CTARn_CSSCK(0)  // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-            | SPIx_CTARn_PBR(0)    // Baud Rate Prescaler = 2
-            | SPIx_CTARn_BR(0)     // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void)g;
-    // Only the LCD is using the SPI bus, so no need to acquire
-    // spiAcquireBus(&SPID1);
-    spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
-    (void)g;
-    // Only the LCD is using the SPI bus, so no need to release
-    // spiReleaseBus(&SPID1);
-    spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void)g;
-    setPinOutput(ST7565_A0_PIN);
-    writePinHigh(ST7565_A0_PIN);
-    setPinOutput(ST7565_RST_PIN);
-    writePinHigh(ST7565_RST_PIN);
-    setPinOutput(ST7565_SS_PIN);
-
-    palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2);
-    palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2);
-
-    spiInit();
-    spiStart(&SPID1, &spi1config);
-    release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void)g;
-    writePin(ST7565_RST_PIN, !state);
-}
-
-static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) {
-    (void)g;
-    writePinLow(ST7565_A0_PIN);
-    spiSend(&SPID1, 1, &cmd);
-}
-
-static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) {
-    (void)g;
-    writePinHigh(ST7565_A0_PIN);
-    spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk
deleted file mode 100644
index 799a986b0a..0000000000
--- a/drivers/ugfx/gdisp/st7565/driver.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-GFXINC += drivers/ugfx/gdisp/st7565
-GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
-GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
deleted file mode 100644
index f586f97e38..0000000000
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#    define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK
-#    include "gdisp_lld_config.h"
-#    include "src/gdisp/gdisp_driver.h"
-
-#    include "board_st7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#    ifndef GDISP_SCREEN_HEIGHT
-#        define GDISP_SCREEN_HEIGHT LCD_HEIGHT
-#    endif
-#    ifndef GDISP_SCREEN_WIDTH
-#        define GDISP_SCREEN_WIDTH LCD_WIDTH
-#    endif
-#    ifndef GDISP_INITIAL_CONTRAST
-#        define GDISP_INITIAL_CONTRAST 35
-#    endif
-#    ifndef GDISP_INITIAL_BACKLIGHT
-#        define GDISP_INITIAL_BACKLIGHT 100
-#    endif
-
-#    define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
-
-#    include "st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility.                        */
-/*===========================================================================*/
-#    ifndef ST7565_LCD_BIAS
-#        define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#    endif
-#    ifndef ST7565_ADC
-#        define ST7565_ADC ST7565_ADC_NORMAL
-#    endif
-#    ifndef ST7565_COM_SCAN
-#        define ST7565_COM_SCAN ST7565_COM_SCAN_INC
-#    endif
-#    ifndef ST7565_PAGE_ORDER
-#        define ST7565_PAGE_ORDER 0, 1, 2, 3, 4, 5, 6, 7
-#    endif
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-// Some common routines and macros
-#    define RAM(g) ((gU8 *)g->priv)
-#    define write_cmd2(g, cmd1, cmd2) \
-        {                             \
-            write_cmd(g, cmd1);       \
-            write_cmd(g, cmd2);       \
-        }
-#    define write_cmd3(g, cmd1, cmd2, cmd3) \
-        {                                   \
-            write_cmd(g, cmd1);             \
-            write_cmd(g, cmd2);             \
-            write_cmd(g, cmd3);             \
-        }
-
-// Some common routines and macros
-#    define delay(us) gfxSleepMicroseconds(us)
-#    define delay_ms(ms) gfxSleepMilliseconds(ms)
-
-#    define xyaddr(x, y) ((x) + ((y) >> 3) * GDISP_SCREEN_WIDTH)
-#    define xybit(y) (1 << ((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-    // The private area is the display surface.
-    g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8);
-    if (!g->priv) {
-        return gFalse;
-    }
-
-    // Initialise the board interface
-    init_board(g);
-
-    // Hardware reset
-    setpin_reset(g, TRUE);
-    gfxSleepMilliseconds(20);
-    setpin_reset(g, FALSE);
-    gfxSleepMilliseconds(20);
-    acquire_bus(g);
-
-    write_cmd(g, ST7565_LCD_BIAS);
-    write_cmd(g, ST7565_ADC);
-    write_cmd(g, ST7565_COM_SCAN);
-
-    write_cmd(g, ST7565_START_LINE | 0);
-
-    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST * 64 / 101);
-    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
-
-    // turn on voltage converter (VC=1, VR=0, VF=0)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x04);
-    delay_ms(50);
-
-    // turn on voltage regulator (VC=1, VR=1, VF=0)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x06);
-    delay_ms(50);
-
-    // turn on voltage follower (VC=1, VR=1, VF=1)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-    delay_ms(50);
-
-    write_cmd(g, ST7565_DISPLAY_ON);
-    write_cmd(g, ST7565_ALLON_NORMAL);
-    write_cmd(g, ST7565_INVERT_DISPLAY);  // Disable Inversion of display.
-
-    write_cmd(g, ST7565_RMW);
-
-    // Finish Init
-    post_init_board(g);
-
-    // Release the bus
-    release_bus(g);
-
-    /* Initialise the GDISP structure */
-    g->g.Width       = GDISP_SCREEN_WIDTH;
-    g->g.Height      = GDISP_SCREEN_HEIGHT;
-    g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode   = powerOff;
-    g->g.Backlight   = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast    = GDISP_INITIAL_CONTRAST;
-    return TRUE;
-}
-
-#    if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned p;
-
-    // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
-
-    acquire_bus(g);
-    gU8 pagemap[] = {ST7565_PAGE_ORDER};
-    for (p = 0; p < sizeof(pagemap); p++) {
-        write_cmd(g, ST7565_PAGE | pagemap[p]);
-        write_cmd(g, ST7565_COLUMN_MSB | 0);
-        write_cmd(g, ST7565_COLUMN_LSB | 0);
-        write_cmd(g, ST7565_RMW);
-        write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
-    }
-    release_bus(g);
-
-    g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-#    endif
-
-#    if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t x, y;
-
-    switch (g->g.Orientation) {
-        default:
-        case GDISP_ROTATE_0:
-            x = g->p.x;
-            y = g->p.y;
-            break;
-        case GDISP_ROTATE_90:
-            x = g->p.y;
-            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
-            break;
-        case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
-            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
-            break;
-        case GDISP_ROTATE_270:
-            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
-            y = g->p.x;
-            break;
-    }
-    if (gdispColor2Native(g->p.color) != Black)
-        RAM(g)[xyaddr(x, y)] |= xybit(y);
-    else
-        RAM(g)[xyaddr(x, y)] &= ~xybit(y);
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#    endif
-
-#    if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t x, y;
-
-    switch (g->g.Orientation) {
-        default:
-        case GDISP_ROTATE_0:
-            x = g->p.x;
-            y = g->p.y;
-            break;
-        case GDISP_ROTATE_90:
-            x = g->p.y;
-            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
-            break;
-        case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
-            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
-            break;
-        case GDISP_ROTATE_270:
-            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
-            y = g->p.x;
-            break;
-    }
-    return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-#    endif
-
-#    if GDISP_HARDWARE_BITFILLS
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t *buffer     = (uint8_t *)g->p.ptr;
-    int      linelength = g->p.cx;
-    for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx   = g->p.x;
-        unsigned dsty   = g->p.y + i;
-        unsigned srcx   = g->p.x1;
-        unsigned srcy   = g->p.y1 + i;
-        unsigned srcbit = srcy * g->p.x2 + srcx;
-        for (int j = 0; j < linelength; j++) {
-            uint8_t  src    = buffer[srcbit / 8];
-            uint8_t  bit    = 7 - (srcbit % 8);
-            uint8_t  bitset = (src >> bit) & 1;
-            uint8_t *dst    = &(RAM(g)[xyaddr(dstx, dsty)]);
-            if (bitset) {
-                *dst |= xybit(dsty);
-            } else {
-                *dst &= ~xybit(dsty);
-            }
-            dstx++;
-            srcbit++;
-        }
-    }
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#    endif
-
-#    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch (g->p.x) {
-        case GDISP_CONTROL_POWER:
-            if (g->g.Powermode == (powermode_t)g->p.ptr) return;
-            switch ((powermode_t)g->p.ptr) {
-                case powerOff:
-                case powerSleep:
-                case powerDeepSleep:
-                    acquire_bus(g);
-                    write_cmd(g, ST7565_DISPLAY_OFF);
-                    release_bus(g);
-                    break;
-                case powerOn:
-                    acquire_bus(g);
-                    write_cmd(g, ST7565_DISPLAY_ON);
-                    release_bus(g);
-                    break;
-                default:
-                    return;
-            }
-            g->g.Powermode = (powermode_t)g->p.ptr;
-            return;
-
-        case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr) return;
-            switch ((orientation_t)g->p.ptr) {
-                /* Rotation is handled by the drawing routines */
-                case GDISP_ROTATE_0:
-                case GDISP_ROTATE_180:
-                    g->g.Height = GDISP_SCREEN_HEIGHT;
-                    g->g.Width  = GDISP_SCREEN_WIDTH;
-                    break;
-                case GDISP_ROTATE_90:
-                case GDISP_ROTATE_270:
-                    g->g.Height = GDISP_SCREEN_WIDTH;
-                    g->g.Width  = GDISP_SCREEN_HEIGHT;
-                    break;
-                default:
-                    return;
-            }
-            g->g.Orientation = (orientation_t)g->p.ptr;
-            return;
-
-        case GDISP_CONTROL_CONTRAST:
-            if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100;
-            acquire_bus(g);
-            write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr) << 6) / 101) & 0x3F);
-            release_bus(g);
-            g->g.Contrast = (unsigned)g->p.ptr;
-            return;
-    }
-}
-#    endif  // GDISP_NEED_CONTROL
-
-#endif  // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
deleted file mode 100644
index 6052058ec2..0000000000
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#    define GDISP_HARDWARE_FLUSH GFXON  // This controller requires flushing
-#    define GDISP_HARDWARE_DRAWPIXEL GFXON
-#    define GDISP_HARDWARE_PIXELREAD GFXON
-#    define GDISP_HARDWARE_CONTROL GFXON
-#    define GDISP_HARDWARE_BITFILLS GFXON
-
-#    define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h
deleted file mode 100644
index 3c77a88569..0000000000
--- a/drivers/ugfx/gdisp/st7565/st7565.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST 0x81
-#define ST7565_ALLON_NORMAL 0xA4
-#define ST7565_ALLON 0xA5
-#define ST7565_POSITIVE_DISPLAY 0xA6
-#define ST7565_INVERT_DISPLAY 0xA7
-#define ST7565_DISPLAY_OFF 0xAE
-#define ST7565_DISPLAY_ON 0xAF
-
-#define ST7565_LCD_BIAS_7 0xA3
-#define ST7565_LCD_BIAS_9 0xA2
-
-#define ST7565_ADC_NORMAL 0xA0
-#define ST7565_ADC_REVERSE 0xA1
-
-#define ST7565_COM_SCAN_INC 0xC0
-#define ST7565_COM_SCAN_DEC 0xC8
-
-#define ST7565_START_LINE 0x40
-#define ST7565_PAGE 0xB0
-#define ST7565_COLUMN_MSB 0x10
-#define ST7565_COLUMN_LSB 0x00
-#define ST7565_RMW 0xE0
-
-#define ST7565_RESISTOR_RATIO 0x20
-#define ST7565_POWER_CONTROL 0x28
-
-#define ST7565_RESET 0xE2
-
-#endif /* _ST7565_H */