Merge remote-tracking branch 'remotes/jackhumbert/master'

1 files changed, 0 insertions, 106 deletions

diff --git a/converter/sun_usb/README b/converter/sun_usb/README
deleted file mode 100644
index 98340dd315..0000000000
--- a/converter/sun_usb/README
+++ /dev/null
@@ -1,106 +0,0 @@
-Sun to USB keyboard protocol converter
-======================================
-Target MCU is ATMega32u4 but other USB capable AVR will also work.
-
-This converter will work with Sun Type 2-5 Keyboards.
-
-
-Tested on:
-Sun Type 3 Keyboard: http://blog.daveastels.com.s3-website-us-west-2.amazonaws.com/2014/12/27/type-3-keyboard.html
-CTCSP SHORT TYPE KEYBOARD(Type 5): http://imgur.com/a/QIv6p
-
-
-Keymap of Type 3(keymap_sun3.c) were impoted from dastels's repository.
-https://github.com/dastels/tmk_keyboard/tree/master/converter/sun3_usb
-
-
-
-Connector
----------
-  8Pin mini DIN
-     ___ ___
-    /  |_|  \
-   / 8  7  6 \
-  | 5    4  3 |
-   \_ 2   1 _/
-     \_____/  
-   (receptacle)
-
-    Wiring:
-    Pin mini DIN        MCU
-    ----------------------------------
-    1   GND             GND
-    2   GND             GND
-    3   5V
-    4   RX/TX(Mouse)
-    5   RX              PD3
-    6   TX              PD2
-    7   GND             GND
-    8   5V              VCC
-
-
-Protocol
---------
-Signal: Asynchronous, Negative logic, 1200baud, No Flow control
-Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
-
-    AVR USART engine expects positive logic while Sun keyboard signal is negative.
-    To use AVR UART engine you need external inverter in front of RX and TX pin.
-    Otherwise you can software serial routine to communicate the keyboard.
-
-This converter uses software method, you doesn't need any inverter part.
-
-
-Commands From System To Keyboard
-    0x01 Reset
-            Keyboard responds with following byte sequence:
-            Success: 0xFF 0x04 0x7F
-            Fail:    0x7E 0x01 0x7F
-    0x02 Bell On
-    0x03 Bell Off
-    0x0A Click On
-    0x0B Click Off
-    0x0E LED
-            followed by LED status byte:
-            bit: 3       2       1       0
-            LED: CapsLk  ScrLk   Compose NumLk
-    0x0F Layout
-            Keyboard responds with 'Layout Response' 0xFE 0xXX
-
-Commands From Keyboard To System
-    0x7F Idle
-            means no keys pressed.
-    0xFE Layout Response
-    0xFF Reset Response(followed by 0x04)
-     
-Reference
-    http://kentie.net/article/sunkbd/page2.htm
-    http://kentie.net/article/sunkbd/KBD.pdf
-
-
-Build Firmware
---------------
-Just use 'make'
-    $ cd sun_usb
-    $ make
-Then, load the binary to MCU with your favorite programmer.
-
-
-Sun commands
-------------
-You can send Sun protocol commands with TMK `Magic` key combo. By default `Magic` key is `LShift` + `RShift`, `LAlt` + `RAlt' or `LMeta` + `RMeta`.
-https://github.com/tmk/tmk_keyboard#magic-commands
-
-Following Sun specific commands are available. For example, to send 'Bell On' you can press `LShift` + `RShift` + `Up` keys simultaneously.
-
-```
------ Sun converter Help -----
-Up:     Bell On
-Down:   Bell Off
-Left:   Click On
-Right:  Click Off
-PgUp:   LED all On
-PgDown: LED all On
-Insert: Layout
-Delete: Reset
-```