Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

20 files changed, 0 insertions, 2351 deletions

diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
deleted file mode 100644
index 51b2225661..0000000000
--- a/converter/ps2_usb/Makefile
+++ /dev/null
@@ -1,105 +0,0 @@
-# 
-# Makefile for Teensy
-#
-# Target file name (without extension).
-TARGET = ps2_usb_lufa
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-
-# PS/2 Options
-#
-#PS2_USE_USART = yes	# uses hardware USART engine for PS/2 signal receive(recomened)
-PS2_USE_INT = yes	# uses external interrupt for falling edge of PS/2 clock pin
-#PS2_USE_BUSYWAIT = yes	# uses primitive reference code
-
-
-# Optimize size but this may cause error "relocation truncated to fit"
-#EXTRALDFLAGS = -Wl,--relax
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.mbed b/converter/ps2_usb/Makefile.mbed
deleted file mode 100644
index a7ea5bcf24..0000000000
--- a/converter/ps2_usb/Makefile.mbed
+++ /dev/null
@@ -1,46 +0,0 @@
-PROJECT = ps2_usb
-
-TMK_DIR = ../../tmk_core
-MBED_DIR = $(TMK_DIR)/tool/mbed/mbed-sdk
-
-#VPATH += $(MBED_DIR):$(TMK_DIR)
-vpath %.s .:$(MBED_DIR):$(TMK_DIR)
-vpath %.c .:$(MBED_DIR):$(TMK_DIR)
-vpath %.cpp .:$(MBED_DIR):$(TMK_DIR)
-
-OBJDIR = ./build
-
-OBJECTS = \
-	$(OBJDIR)/protocol/ps2_busywait.o \
-	$(OBJDIR)/protocol/ps2_io_mbed.o \
-	$(OBJDIR)/./keymap_common.o \
-	$(OBJDIR)/./matrix.o \
-	$(OBJDIR)/./led.o \
-	$(OBJDIR)/./main.o
-
-ifdef KEYMAP
-    OBJECTS := $(OBJDIR)/keymap_$(KEYMAP).o $(OBJECTS)
-else
-    OBJECTS := $(OBJDIR)/keymap_plain.o $(OBJECTS)
-endif
-
-CONFIG_H = config_mbed.h
-
-SYS_OBJECTS = 
-
-INCLUDE_PATHS = -I.
-
-LIBRARY_PATHS = 
-LIBRARIES = 
-
-# Build Options
-#   Comment out to disable
-#BOOTMAGIC_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-
-
-#include $(TMK_DIR)/tool/mbed/mk20d50m.mk
-include $(TMK_DIR)/tool/mbed/lpc11u35_501.mk
-include $(TMK_DIR)/tool/mbed/mbed.mk
-include $(TMK_DIR)/tool/mbed/common.mk
-include $(TMK_DIR)/tool/mbed/gcc.mk
diff --git a/converter/ps2_usb/Makefile.pjrc b/converter/ps2_usb/Makefile.pjrc
deleted file mode 100644
index 64319aca88..0000000000
--- a/converter/ps2_usb/Makefile.pjrc
+++ /dev/null
@@ -1,75 +0,0 @@
-# Target file name (without extension).
-TARGET = ps2_usb_pjrc
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =   keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   *Comment out* to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-# PS/2 Options
-#
-#PS2_USE_USART = yes	# uses hardware USART engine for PS/2 signal receive(recomened)
-#PS2_USE_INT = yes	# uses external interrupt for falling edge of PS/2 clock pin
-PS2_USE_BUSYWAIT = yes	# uses primitive reference code
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.tmk_rev1 b/converter/ps2_usb/Makefile.tmk_rev1
deleted file mode 100644
index 6aaef49969..0000000000
--- a/converter/ps2_usb/Makefile.tmk_rev1
+++ /dev/null
@@ -1,98 +0,0 @@
-# 
-# Makefile for TMK keyboard converter rev2
-#     https://github.com/tmk/keyboard_converter#pcb-rev1
-#
-# Target file name (without extension).
-TARGET = ps2_usb_tmk_rev1
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config_tmk_rev1.h
-
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-
-# PS/2 Options
-#
-PS2_USE_USART = yes	# uses hardware USART engine for PS/2 signal receive(recomened)
-#PS2_USE_BUSYWAIT = yes	# uses primitive reference code
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.tmk_rev2 b/converter/ps2_usb/Makefile.tmk_rev2
deleted file mode 100644
index 5049a22703..0000000000
--- a/converter/ps2_usb/Makefile.tmk_rev2
+++ /dev/null
@@ -1,98 +0,0 @@
-# 
-# Makefile for TMK keyboard converter rev2
-#     https://github.com/tmk/keyboard_converter#pcb-rev2
-#
-# Target file name (without extension).
-TARGET = ps2_usb_tmk_rev2
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config_tmk_rev2.h
-
-
-# MCU name
-MCU = atmega32u2
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-
-# PS/2 Options
-#
-PS2_USE_INT = yes	# uses external interrupt for falling edge of PS/2 clock pin
-#PS2_USE_BUSYWAIT = yes	# uses primitive reference code
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.vusb b/converter/ps2_usb/Makefile.vusb
deleted file mode 100644
index d9fa12bcda..0000000000
--- a/converter/ps2_usb/Makefile.vusb
+++ /dev/null
@@ -1,107 +0,0 @@
-# Target file name (without extension).
-TARGET = ps2_usb_vusb
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-
-# Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful.
-PS2_USE_USART = yes
-
-
-# V-USB debug level: To use ps2_usart.c level must be 0
-# ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS += -DDEBUG_LEVEL=0
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-#MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-MCU = atmega168
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 20000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-NO_UART = yes		# UART is unavailable
-
-
-
-#---------------- Programming Options --------------------------
-AVRDUDE = avrdude
-# Type: avrdude -c ? to get a full listing.
-AVRDUDE_PROGRAMMER = usbasp
-AVRDUDE_PORT =
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-# Boot Section Size in bytes
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBasp           2048
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/protocol/vusb.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/README.md b/converter/ps2_usb/README.md
deleted file mode 100644
index 74464e2640..0000000000
--- a/converter/ps2_usb/README.md
+++ /dev/null
@@ -1,84 +0,0 @@
-PS/2 to USB keyboard converter
-==============================
-This firmware converts PS/2 keyboard protocol to USB.(It supports Scan Code Set 2.)
-
-
-Connect Wires
--------------
-In case of Teensy2.0(ATMega32U4):
-
-1. Connect **Vcc** and **GND**.
-2. Connect **Clock** and **Data** line. 
-    - **Interrupt**:   **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
-    - **Busywait**:    **Clock** is on `PD1` and **Data** on `PD0`.
-    - **USART**:       **Clock** is on `PD5` and **Data** on `PD2`.
-3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
-
-To change pin configuration edit **config.h** and **Makefile**.
-
-
-Build Firmware
---------------
-For **PJRC Teensy** just run `make`:
-
-    $ make clean
-    $ make
-
-To select keymap:
-
-    $ make clean
-    $ make KEYMAP=[plain|jis|spacefn|...]
-
-After that you will find HEX file `ps2_usb_lufa.hex` in current directory.
-
-
-- For **TMK converter Rev.1** use `make -f Makefile.tmk_rev1` instead of `make` and HEX file is `ps2_usb_tmk_rev1.hex`.
-
-- For **TMK converter Rev.2** use `make -f Makefile.tmk_rev2` instead of `make` and HEX file is `ps2_usb_tmk_rev2.hex`.
-
-
-Keymap
-------
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in README.md of top directory) and existent keymap files.
-
-
-PS/2 signal handling implementations
-------------------------------------
-Following three methods can be used to implement PS/2 signal handling.
-
-### Simple and stupid busy-wait(ps2_busywait.c)
-    This is expected to implemented with portable C code for reference.
-### Interrupt driven(ps2_interrupt.c)
-    Uses pin interrupt to detect falling edge of clock line.
-### USART hardware module(ps2_usart.c)
-    Uses AVR USART engine to receive PS/2 signal.
-
-To select method edit Makefile.
-
-
-V-USB Support
--------------
-With V-USB you can use this converter on ATmega(168/328) but it doesn't support NKRO at this time.
-
-Circuit:
-
-                    +---+   +---------------+
-    USB            GND  |   |   ATmega168   |
-    ===                 C3  |               |
-    5V <-------+--------+---|Vcc,AVCC       |        PS/2
-               R1           |               |        ====
-    D- <----+--+-----R2-----|INT1        RXD|------->DATA
-    D+ <----|---+----R3-----|INT0        XCK|------->CLOCK
-            Z1  Z2          |               |      ->5V
-    GND<----+---+--+--+-----|GND            |      ->GND
-                   |  |     |               |
-                   |  C2-+--|XTAL1          |
-                   |     X1 |               |
-                   +--C3-+--|XTAL2          |
-                            +---------------+
-    R1:     1.5K Ohm
-    R2,R3:  68 Ohm
-    Z1,Z2:  Zenner 3.6V
-    C1,C2:  22pF
-    C3:     0.1uF
-    X1:     Crystal 20MHz(16MHz/12MHz)
diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h
deleted file mode 100644
index c0a4fab13b..0000000000
--- a/converter/ps2_usb/config.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include <avr/interrupt.h>
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6512
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         PS/2 keyboard converter
-#define DESCRIPTION     convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-//#define NO_SUSPEND_POWER_DOWN
-
-
-/*
- * PS/2 Busywait
- */
-#ifdef PS2_USE_BUSYWAIT
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   1
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-#endif
-
-/*
- * PS/2 Pin interrupt
- */
-#ifdef PS2_USE_INT
-/* uses INT1 for clock line(ATMega32U4) */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   1
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-#define PS2_INT_INIT()  do {    \
-    EICRA |= ((1<<ISC11) |      \
-              (0<<ISC10));      \
-} while (0)
-#define PS2_INT_ON()  do {      \
-    EIMSK |= (1<<INT1);         \
-} while (0)
-#define PS2_INT_OFF() do {      \
-    EIMSK &= ~(1<<INT1);        \
-} while (0)
-#define PS2_INT_VECT    INT1_vect
-#endif
-
-/*
- * PS/2 USART
- */
-#ifdef PS2_USE_USART
-#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
-/* XCK for clock line and RXD for data line */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   5
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    2
-/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
-/* set DDR of CLOCK as input to be slave */
-#define PS2_USART_INIT() do {   \
-    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-    UCSR1C = ((1 << UMSEL10) |  \
-              (3 << UPM10)   |  \
-              (0 << USBS1)   |  \
-              (3 << UCSZ10)  |  \
-              (0 << UCPOL1));   \
-    UCSR1A = 0;                 \
-    UBRR1H = 0;                 \
-    UBRR1L = 0;                 \
-} while (0)
-#define PS2_USART_RX_INT_ON() do {  \
-    UCSR1B = ((1 << RXCIE1) |       \
-              (1 << RXEN1));        \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
-    UCSR1B = (1 << RXEN1);          \
-} while (0)
-#define PS2_USART_OFF() do {    \
-    UCSR1C = 0;                 \
-    UCSR1B &= ~((1 << RXEN1) |  \
-                (1 << TXEN1));  \
-} while (0)
-#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
-#define PS2_USART_RX_DATA       UDR1
-#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-#define PS2_USART_RX_VECT       USART1_RX_vect
-#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
-/* XCK for clock line and RXD for data line */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   4
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
-/* set DDR of CLOCK as input to be slave */
-#define PS2_USART_INIT() do {   \
-    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-    UCSR0C = ((1 << UMSEL00) |  \
-              (3 << UPM00)   |  \
-              (0 << USBS0)   |  \
-              (3 << UCSZ00)  |  \
-              (0 << UCPOL0));   \
-    UCSR0A = 0;                 \
-    UBRR0H = 0;                 \
-    UBRR0L = 0;                 \
-} while (0)
-#define PS2_USART_RX_INT_ON() do {  \
-    UCSR0B = ((1 << RXCIE0) |       \
-              (1 << RXEN0));        \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
-    UCSR0B = (1 << RXEN0);          \
-} while (0)
-#define PS2_USART_OFF() do {    \
-    UCSR0C = 0;                 \
-    UCSR0B &= ~((1 << RXEN0) |  \
-                (1 << TXEN0));  \
-} while (0)
-#define PS2_USART_RX_READY      (UCSR0A & (1<<RXC0))
-#define PS2_USART_RX_DATA       UDR0
-#define PS2_USART_ERROR         (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
-#define PS2_USART_RX_VECT       USART_RX_vect
-#endif
-#endif
-
-#endif
diff --git a/converter/ps2_usb/config_mbed.h b/converter/ps2_usb/config_mbed.h
deleted file mode 100644
index 5819763e65..0000000000
--- a/converter/ps2_usb/config_mbed.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_MBED_H
-#define CONFIG_MBED_H
-
-
-#if 0
-// duplicated name against mbed USBDeivce
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6512
-#endif
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         PS/2 keyboard converter
-#define DESCRIPTION     convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-/*
- * PS/2 Busywait
- */
-#ifdef PS2_USE_BUSYWAIT
-#   define PS2_CLOCK_PORT  PORTD
-#   define PS2_CLOCK_PIN   PIND
-#   define PS2_CLOCK_DDR   DDRD
-#   define PS2_CLOCK_BIT   5
-#   define PS2_DATA_PORT   PORTD
-#   define PS2_DATA_PIN    PIND
-#   define PS2_DATA_DDR    DDRD
-#   define PS2_DATA_BIT    2
-#endif
-
-
-#endif
diff --git a/converter/ps2_usb/config_tmk_rev1.h b/converter/ps2_usb/config_tmk_rev1.h
deleted file mode 100644
index 75dc97df38..0000000000
--- a/converter/ps2_usb/config_tmk_rev1.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include <avr/interrupt.h>
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6512
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         PS/2 keyboard converter
-#define DESCRIPTION     convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-//#define NO_SUSPEND_POWER_DOWN
-
-
-/*
- * PS/2 Busywait
- */
-#ifdef PS2_USE_BUSYWAIT
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   5
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    2
-#endif
-
-/*
- * PS/2 USART
- */
-#ifdef PS2_USE_USART
-#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
-/* XCK for clock line and RXD for data line */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   5
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    2
-/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
-/* set DDR of CLOCK as input to be slave */
-#define PS2_USART_INIT() do {   \
-    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-    UCSR1C = ((1 << UMSEL10) |  \
-              (3 << UPM10)   |  \
-              (0 << USBS1)   |  \
-              (3 << UCSZ10)  |  \
-              (0 << UCPOL1));   \
-    UCSR1A = 0;                 \
-    UBRR1H = 0;                 \
-    UBRR1L = 0;                 \
-} while (0)
-#define PS2_USART_RX_INT_ON() do {  \
-    UCSR1B = ((1 << RXCIE1) |       \
-              (1 << RXEN1));        \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
-    UCSR1B = (1 << RXEN1);          \
-} while (0)
-#define PS2_USART_OFF() do {    \
-    UCSR1C = 0;                 \
-    UCSR1B &= ~((1 << RXEN1) |  \
-                (1 << TXEN1));  \
-} while (0)
-#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
-#define PS2_USART_RX_DATA       UDR1
-#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-#define PS2_USART_RX_VECT       USART1_RX_vect
-#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
-/* XCK for clock line and RXD for data line */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   4
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
-/* set DDR of CLOCK as input to be slave */
-#define PS2_USART_INIT() do {   \
-    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-    UCSR0C = ((1 << UMSEL00) |  \
-              (3 << UPM00)   |  \
-              (0 << USBS0)   |  \
-              (3 << UCSZ00)  |  \
-              (0 << UCPOL0));   \
-    UCSR0A = 0;                 \
-    UBRR0H = 0;                 \
-    UBRR0L = 0;                 \
-} while (0)
-#define PS2_USART_RX_INT_ON() do {  \
-    UCSR0B = ((1 << RXCIE0) |       \
-              (1 << RXEN0));        \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
-    UCSR0B = (1 << RXEN0);          \
-} while (0)
-#define PS2_USART_OFF() do {    \
-    UCSR0C = 0;                 \
-    UCSR0B &= ~((1 << RXEN0) |  \
-                (1 << TXEN0));  \
-} while (0)
-#define PS2_USART_RX_READY      (UCSR0A & (1<<RXC0))
-#define PS2_USART_RX_DATA       UDR0
-#define PS2_USART_ERROR         (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
-#define PS2_USART_RX_VECT       USART_RX_vect
-#endif
-#endif
-
-#endif
diff --git a/converter/ps2_usb/config_tmk_rev2.h b/converter/ps2_usb/config_tmk_rev2.h
deleted file mode 100644
index 2e91838e28..0000000000
--- a/converter/ps2_usb/config_tmk_rev2.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include <avr/interrupt.h>
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6512
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         PS/2 keyboard converter
-#define DESCRIPTION     convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-//#define NO_SUSPEND_POWER_DOWN
-
-
-/*
- * PS/2 Busywait
- */
-#ifdef PS2_USE_BUSYWAIT
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   1
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-#endif
-
-/*
- * PS/2 Pin interrupt
- */
-#ifdef PS2_USE_INT
-/* uses INT1 for clock line(ATMega32U4) */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   1
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-#define PS2_INT_INIT()  do {    \
-    EICRA |= ((1<<ISC11) |      \
-              (0<<ISC10));      \
-} while (0)
-#define PS2_INT_ON()  do {      \
-    EIMSK |= (1<<INT1);         \
-} while (0)
-#define PS2_INT_OFF() do {      \
-    EIMSK &= ~(1<<INT1);        \
-} while (0)
-#define PS2_INT_VECT    INT1_vect
-#endif
-
-#endif
diff --git a/converter/ps2_usb/keymap_common.c b/converter/ps2_usb/keymap_common.c
deleted file mode 100644
index e344fb4167..0000000000
--- a/converter/ps2_usb/keymap_common.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
-Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "keymap_common.h"
-#include "progmem.h"
-
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
-    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
-}
diff --git a/converter/ps2_usb/keymap_common.h b/converter/ps2_usb/keymap_common.h
deleted file mode 100644
index d783e01ded..0000000000
--- a/converter/ps2_usb/keymap_common.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
-Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "report.h"
-#include "print.h"
-#include "debug.h"
-#include "keymap.h"
-
-
-// 32*8(256) byte array which converts PS/2 code into USB code
-extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
-extern const uint16_t fn_actions[];
-
-
-/* All keys */
-#define KEYMAP_ALL( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
-                                                                                            \
-    K61,                     /* for European ISO */                                         \
-    K51, K13, K6A, K64, K67, /* for Japanese JIS */                                         \
-    K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */                \
-    KB7, KBF, KDE,           /* System Power, Sleep, Wake */                                \
-    KA3, KB2, KA1,           /* Mute, Volume Up, Volume Down */                             \
-    KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */                \
-    KC8, KAB, KC0,           /* Mail, Calculator, My Computer */                            \
-    K90, KBA, KB8, KB0,      /* WWW Search, Home, Back, Forward */                          \
-    KA8, KA0, K98            /* WWW Stop, Refresh, Favorites */                             \
-) { \
-    { KC_NO,    KC_##K01, KC_NO,    KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
-    { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO    }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO    }, \
-    { KC_##K18, KC_NO,    KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO    }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO    }, \
-    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO    }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO    }, \
-    { KC_##K38, KC_NO,    KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO    }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO    }, \
-    { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO    }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_NO,    KC_##K54, KC_##K55, KC_NO,    KC_##K57 }, \
-    { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO,    KC_##K5D, KC_NO,    KC_##K5F }, \
-    { KC_NO,    KC_##K61, KC_NO,    KC_NO,    KC_##K64, KC_NO,    KC_##K66, KC_##K67 }, \
-    { KC_NO,    KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
-    { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_##K83, KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##K90, KC_##K91, KC_NO,    KC_NO,    KC_##K94, KC_##K95, KC_NO,    KC_NO    }, \
-    { KC_##K98, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K9F }, \
-    { KC_##KA0, KC_##KA1, KC_NO,    KC_##KA3, KC_NO,    KC_NO,    KC_NO,    KC_##KA7 }, \
-    { KC_##KA8, KC_NO,    KC_NO,    KC_##KAB, KC_NO,    KC_NO,    KC_NO,    KC_##KAF }, \
-    { KC_##KB0, KC_NO,    KC_##KB2, KC_NO,    KC_##KB4, KC_NO,    KC_NO,    KC_##KB7 }, \
-    { KC_##KB8, KC_NO,    KC_##KBA, KC_##KBB, KC_NO,    KC_NO,    KC_NO,    KC_##KBF }, \
-    { KC_##KC0, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##KC8, KC_NO,    KC_##KCA, KC_NO,    KC_NO,    KC_##KCD, KC_NO,    KC_NO    }, \
-    { KC_##KD0, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##KDA, KC_NO,    KC_NO,    KC_NO,    KC_##KDE, KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_##KE9, KC_NO,    KC_##KEB, KC_##KEC, KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO,    KC_##KF4, KC_##KF5, KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##KFA, KC_NO,    KC_##KFC, KC_##KFD, KC_##KFE, KC_NO    }, \
-}
-
-/* US layout */
-#define KEYMAP( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
-) \
-KEYMAP_ALL( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
-                                                                                            \
-    NUBS,                                                                                   \
-    RO, KANA, JYEN, HENK, MHEN,                                                             \
-    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
-    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
-    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
-    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
-    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
-    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
-    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
-)
-
-/* ISO layout */
-#define KEYMAP_ISO( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,     KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A,               K6B,K73,K74,K79, \
-    K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,    K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
-) \
-KEYMAP_ALL( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
-                                                                                            \
-    K61,                                                                                    \
-    RO, KANA, JYEN, HENK, MHEN,                                                             \
-    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
-    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
-    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
-    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
-    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
-    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
-    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
-)
-
-/* JIS layout */
-#define KEYMAP_JIS( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,         KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,         KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,    K67,K29,K64,K13,            K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
-) \
-KEYMAP_ALL( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
-                                                                                            \
-    NUBS,                                                                                   \
-    K51, K13, K6A, K64, K67,                                                                \
-    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
-    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
-    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
-    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
-    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
-    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
-    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
-)
-
-#endif
diff --git a/converter/ps2_usb/keymap_jis.c b/converter/ps2_usb/keymap_jis.c
deleted file mode 100644
index 02585150fb..0000000000
--- a/converter/ps2_usb/keymap_jis.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * JIS layout Japanese keyboard
- */
-#include "keymap_common.h"
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: JIS LAYOUT
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
-     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| JY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Ret | |Del|End|PgD| |  7|  8|  9|   |
-     * |------------------------------------------------------`    | `-----------' |-----------|  +|
-     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  \|    |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
-     * |Ctrl |Gui |Alt |MHEN| Space  |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP_JIS(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,               DEL, END, PGDN,    P7,  P8,  P9,
-    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,BSLS,     ENT,                         P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RO,            RSFT,          UP,           P1,  P2,  P3,
-    LCTL,LGUI,LALT,     MHEN,SPC, HENK,KANA,               RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-};
diff --git a/converter/ps2_usb/keymap_plain.c b/converter/ps2_usb/keymap_plain.c
deleted file mode 100644
index 51b2fddb5b..0000000000
--- a/converter/ps2_usb/keymap_plain.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: default
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
-     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
-     * |-----------------------------------------------------------| `-----------' |-----------|  +|
-     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
-    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
-    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-};
diff --git a/converter/ps2_usb/keymap_spacefn.c b/converter/ps2_usb/keymap_spacefn.c
deleted file mode 100644
index bffd2bc606..0000000000
--- a/converter/ps2_usb/keymap_spacefn.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * SpaceFN layout
- * http://geekhack.org/index.php?topic=51069.0
- */
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: default
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
-     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
-     * |-----------------------------------------------------------| `-----------' |-----------|  +|
-     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
-    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
-    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
-    LCTL,LGUI,LALT,          FN0,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
-
-    /* 1: SpaceFN
-     * ,-----------------------------------------------------------.
-     * |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-     * |-----------------------------------------------------------|
-     * |     |   |   |Esc|   |   |   |Hom|Up |End|Psc|Slk|Pau|Ins  |
-     * |-----------------------------------------------------------|
-     * |      |   |   |   |   |   |PgU|Lef|Dow|Rig|   |   |        |
-     * |-----------------------------------------------------------|
-     * |        |   |   |   |   |Spc|PgD|`  |~  |   |Men|          |
-     * |-----------------------------------------------------------|
-     * |    |    |    |                        |    |    |    |    |
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
-    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,      INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TRNS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP,  END, PSCR,SLCK,PAUS,INS,      DEL, END, PGDN,    P7,  P8,  P9,
-    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS,     TRNS,                        P4,  P5,  P6,  PPLS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP,           TRNS,          UP,           P1,  P2,  P3,
-    TRNS,TRNS,TRNS,          TRNS,                    TRNS,TRNS,TRNS,TRNS,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
-    [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),    // tilde
-};
-
diff --git a/converter/ps2_usb/led.c b/converter/ps2_usb/led.c
deleted file mode 100644
index e448e84ec7..0000000000
--- a/converter/ps2_usb/led.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "ps2.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-    uint8_t ps2_led = 0;
-    if (usb_led &  (1<<USB_LED_SCROLL_LOCK))
-        ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
-    if (usb_led &  (1<<USB_LED_NUM_LOCK))
-        ps2_led |= (1<<PS2_LED_NUM_LOCK);
-    if (usb_led &  (1<<USB_LED_CAPS_LOCK))
-        ps2_led |= (1<<PS2_LED_CAPS_LOCK);
-    ps2_host_set_led(ps2_led);
-}
diff --git a/converter/ps2_usb/main.cpp b/converter/ps2_usb/main.cpp
deleted file mode 100644
index 860af149a0..0000000000
--- a/converter/ps2_usb/main.cpp
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "mbed.h"
-#include "debug.h"
-#include "timer.h"
-#include "action.h"
-#include "keycode.h"
-#include "host.h"
-#include "host_driver.h"
-#include "mbed_driver.h"
- 
-
-// Button and LEDs of LPC11U35 board
-DigitalIn isp(P0_1);            // ISP button
-DigitalOut led_red(P0_20);
-DigitalOut led_green(P0_21);
-
-
-int main(void) {
-    isp.mode(PullUp);
-    led_red = 1;
-    led_green = 0;
-
-    timer_init();
-    host_set_driver(&mbed_driver);
-    keyboard_init();
-
-    //debug_enable = true;
-    xprintf("mbed_onekey ver.eee:\r\n");
-
-
-    bool last_isp = isp;
-    while (1) {
-        keyboard_task();
-
-        //led_green = !led_green;
-        if (last_isp == isp) continue;
-        last_isp = isp;
-        if (last_isp == 0) {
-            led_red = 0;    // on
-            dprintf("timer: %i\r\n", timer_read());
-            //register_code(KC_A);
-        } else {
-            led_red = 1;    // off
-            //unregister_code(KC_A);
-        }
-    }
-}
diff --git a/converter/ps2_usb/matrix.c b/converter/ps2_usb/matrix.c
deleted file mode 100644
index 45cf2a4a90..0000000000
--- a/converter/ps2_usb/matrix.c
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "action.h"
-#include "print.h"
-#include "util.h"
-#include "debug.h"
-#include "ps2.h"
-#include "matrix.h"
-
-
-static void matrix_make(uint8_t code);
-static void matrix_break(uint8_t code);
-static void matrix_clear(void);
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-
-
-/*
- * Matrix Array usage:
- * 'Scan Code Set 2' is assigned into 256(32x8)cell matrix.
- * Hmm, it is very sparse and not efficient :(
- *
- * Notes:
- * Both 'Hanguel/English'(F1) and 'Hanja'(F2) collide with 'Delete'(E0 71) and 'Down'(E0 72).
- * These two Korean keys need exceptional handling and are not supported for now. Sorry.
- *
- *    8bit wide
- *   +---------+
- *  0|         |
- *  :|   XX    | 00-7F for normal codes(without E0-prefix)
- *  f|_________|
- * 10|         |
- *  :|  E0 YY  | 80-FF for E0-prefixed codes
- * 1f|         |     (<YY>|0x80) is used as matrix position.
- *   +---------+
- *
- * Exceptions:
- * 0x83:    F7(0x83) This is a normal code but beyond  0x7F.
- * 0xFC:    PrintScreen
- * 0xFE:    Pause
- */
-static uint8_t matrix[MATRIX_ROWS];
-#define ROW(code)      (code>>3)
-#define COL(code)      (code&0x07)
-
-// matrix positions for exceptional keys
-#define F7             (0x83)
-#define PRINT_SCREEN   (0xFC)
-#define PAUSE          (0xFE)
-
-static bool is_modified = false;
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    debug_enable = true;
-    ps2_host_init();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-
-    return;
-}
-
-/*
- * PS/2 Scan Code Set 2: Exceptional Handling
- *
- * There are several keys to be handled exceptionally.
- * The scan code for these keys are varied or prefix/postfix'd
- * depending on modifier key state.
- *
- * Keyboard Scan Code Specification:
- *     http://www.microsoft.com/whdc/archive/scancode.mspx
- *     http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc
- *
- *
- * 1) Insert, Delete, Home, End, PageUp, PageDown, Up, Down, Right, Left
- *     a) when Num Lock is off
- *     modifiers | make                      | break
- *     ----------+---------------------------+----------------------
- *     Ohter     |                    <make> | <break>
- *     LShift    | E0 F0 12           <make> | <break>  E0 12
- *     RShift    | E0 F0 59           <make> | <break>  E0 59
- *     L+RShift  | E0 F0 12  E0 F0 59 <make> | <break>  E0 59 E0 12
- *
- *     b) when Num Lock is on
- *     modifiers | make                      | break
- *     ----------+---------------------------+----------------------
- *     Other     | E0 12              <make> | <break>  E0 F0 12
- *     Shift'd   |                    <make> | <break>
- *
- *     Handling: These prefix/postfix codes are ignored.
- *
- *
- * 2) Keypad /
- *     modifiers | make                      | break
- *     ----------+---------------------------+----------------------
- *     Ohter     |                    <make> | <break>
- *     LShift    | E0 F0 12           <make> | <break>  E0 12
- *     RShift    | E0 F0 59           <make> | <break>  E0 59
- *     L+RShift  | E0 F0 12  E0 F0 59 <make> | <break>  E0 59 E0 12
- *
- *     Handling: These prefix/postfix codes are ignored.
- *
- *
- * 3) PrintScreen
- *     modifiers | make         | break
- *     ----------+--------------+-----------------------------------
- *     Other     | E0 12  E0 7C | E0 F0 7C  E0 F0 12
- *     Shift'd   |        E0 7C | E0 F0 7C
- *     Control'd |        E0 7C | E0 F0 7C
- *     Alt'd     |           84 | F0 84
- *
- *     Handling: These prefix/postfix codes are ignored, and both scan codes
- *               'E0 7C' and 84 are seen as PrintScreen.
- *
- * 4) Pause
- *     modifiers | make(no break code)
- *     ----------+--------------------------------------------------
- *     Other     | E1 14 77 E1 F0 14 F0 77
- *     Control'd | E0 7E E0 F0 7E
- *
- *     Handling: Both code sequences are treated as a whole.
- *               And we need a ad hoc 'pseudo break code' hack to get the key off
- *               because it has no break code.
- *
- */
-uint8_t matrix_scan(void)
-{
-
-    // scan code reading states
-    static enum {
-        INIT,
-        F0,
-        E0,
-        E0_F0,
-        // Pause
-        E1,
-        E1_14,
-        E1_14_77,
-        E1_14_77_E1,
-        E1_14_77_E1_F0,
-        E1_14_77_E1_F0_14,
-        E1_14_77_E1_F0_14_F0,
-        // Control'd Pause
-        E0_7E,
-        E0_7E_E0,
-        E0_7E_E0_F0,
-    } state = INIT;
-
-
-    is_modified = false;
-
-    // 'pseudo break code' hack
-    if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) {
-        matrix_break(PAUSE);
-    }
-
-    uint8_t code = ps2_host_recv();
-    if (code) xprintf("%i\r\n", code);
-    if (!ps2_error) {
-        switch (state) {
-            case INIT:
-                switch (code) {
-                    case 0xE0:
-                        state = E0;
-                        break;
-                    case 0xF0:
-                        state = F0;
-                        break;
-                    case 0xE1:
-                        state = E1;
-                        break;
-                    case 0x83:  // F7
-                        matrix_make(F7);
-                        state = INIT;
-                        break;
-                    case 0x84:  // Alt'd PrintScreen
-                        matrix_make(PRINT_SCREEN);
-                        state = INIT;
-                        break;
-                    case 0x00:  // Overrun [3]p.25
-                        matrix_clear();
-                        clear_keyboard();
-                        print("Overrun\n");
-                        state = INIT;
-                        break;
-                    default:    // normal key make
-                        if (code < 0x80) {
-                            matrix_make(code);
-                        } else {
-                            matrix_clear();
-                            clear_keyboard();
-                            xprintf("unexpected scan code at INIT: %02X\n", code);
-                        }
-                        state = INIT;
-                }
-                break;
-            case E0:    // E0-Prefixed
-                switch (code) {
-                    case 0x12:  // to be ignored
-                    case 0x59:  // to be ignored
-                        state = INIT;
-                        break;
-                    case 0x7E:  // Control'd Pause
-                        state = E0_7E;
-                        break;
-                    case 0xF0:
-                        state = E0_F0;
-                        break;
-                    default:
-                        if (code < 0x80) {
-                            matrix_make(code|0x80);
-                        } else {
-                            matrix_clear();
-                            clear_keyboard();
-                            xprintf("unexpected scan code at E0: %02X\n", code);
-                        }
-                        state = INIT;
-                }
-                break;
-            case F0:    // Break code
-                switch (code) {
-                    case 0x83:  // F7
-                        matrix_break(F7);
-                        state = INIT;
-                        break;
-                    case 0x84:  // Alt'd PrintScreen
-                        matrix_break(PRINT_SCREEN);
-                        state = INIT;
-                        break;
-                    case 0xF0:
-                        matrix_clear();
-                        clear_keyboard();
-                        xprintf("unexpected scan code at F0: F0(clear and cont.)\n");
-                        break;
-                    default:
-                    if (code < 0x80) {
-                        matrix_break(code);
-                    } else {
-                        matrix_clear();
-                        clear_keyboard();
-                        xprintf("unexpected scan code at F0: %02X\n", code);
-                    }
-                    state = INIT;
-                }
-                break;
-            case E0_F0: // Break code of E0-prefixed
-                switch (code) {
-                    case 0x12:  // to be ignored
-                    case 0x59:  // to be ignored
-                        state = INIT;
-                        break;
-                    default:
-                        if (code < 0x80) {
-                            matrix_break(code|0x80);
-                        } else {
-                            matrix_clear();
-                            clear_keyboard();
-                            xprintf("unexpected scan code at E0_F0: %02X\n", code);
-                        }
-                        state = INIT;
-                }
-                break;
-            // following are states of Pause
-            case E1:
-                switch (code) {
-                    case 0x14:
-                        state = E1_14;
-                        break;
-                    default:
-                        state = INIT;
-                }
-                break;
-            case E1_14:
-                switch (code) {
-                    case 0x77:
-                        state = E1_14_77;
-                        break;
-                    default:
-                        state = INIT;
-                }
-                break;
-            case E1_14_77:
-                switch (code) {
-                    case 0xE1:
-                        state = E1_14_77_E1;
-                        break;
-                    default:
-                        state = INIT;
-                }
-                break;
-            case E1_14_77_E1:
-                switch (code) {
-                    case 0xF0:
-                        state = E1_14_77_E1_F0;
-                        break;
-                    default:
-                        state = INIT;
-                }
-                break;
-            case E1_14_77_E1_F0:
-                switch (code) {
-                    case 0x14:
-                        state = E1_14_77_E1_F0_14;
-                        break;
-                    default:
-                        state = INIT;
-                }
-                break;
-            case E1_14_77_E1_F0_14:
-                switch (code) {
-                    case 0xF0:
-                        state = E1_14_77_E1_F0_14_F0;
-                        break;
-                    default:
-                        state = INIT;
-                }
-                break;
-            case E1_14_77_E1_F0_14_F0:
-                switch (code) {
-                    case 0x77:
-                        matrix_make(PAUSE);
-                        state = INIT;
-                        break;
-                    default:
-                        state = INIT;
-                }
-                break;
-            // Following are states of Control'd Pause
-            case E0_7E:
-                if (code == 0xE0)
-                    state = E0_7E_E0;
-                else
-                    state = INIT;
-                break;
-            case E0_7E_E0:
-                if (code == 0xF0)
-                    state = E0_7E_E0_F0;
-                else
-                    state = INIT;
-                break;
-            case E0_7E_E0_F0:
-                if (code == 0x7E)
-                    matrix_make(PAUSE);
-                state = INIT;
-                break;
-            default:
-                state = INIT;
-        }
-    }
-
-    // TODO: request RESEND when error occurs?
-/*
-    if (PS2_IS_FAILED(ps2_error)) {
-        uint8_t ret = ps2_host_send(PS2_RESEND);
-        xprintf("Resend: %02X\n", ret);
-    }
-*/
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    return is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        if (matrix_has_ghost_in_row(i))
-            return true;
-    }
-#endif
-    return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & (1<<col));
-}
-
-inline
-uint8_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < matrix_rows(); row++) {
-        phex(row); print(": ");
-        pbin_reverse(matrix_get_row(row));
-#ifdef MATRIX_HAS_GHOST
-        if (matrix_has_ghost_in_row(row)) {
-            print(" <ghost");
-        }
-#endif
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop(matrix[i]);
-    }
-    return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
-    // no ghost exists in case less than 2 keys on
-    if (((matrix[row] - 1) & matrix[row]) == 0)
-        return false;
-
-    // ghost exists in case same state as other row
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
-            return true;
-    }
-    return false;
-}
-#endif
-
-
-inline
-static void matrix_make(uint8_t code)
-{
-    if (!matrix_is_on(ROW(code), COL(code))) {
-        matrix[ROW(code)] |= 1<<COL(code);
-        is_modified = true;
-    }
-}
-
-inline
-static void matrix_break(uint8_t code)
-{
-    if (matrix_is_on(ROW(code), COL(code))) {
-        matrix[ROW(code)] &= ~(1<<COL(code));
-        is_modified = true;
-    }
-}
-
-inline
-static void matrix_clear(void)
-{
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-}
diff --git a/converter/ps2_usb/usbconfig.h b/converter/ps2_usb/usbconfig.h
deleted file mode 100644
index d0ca4c717e..0000000000
--- a/converter/ps2_usb/usbconfig.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/* Name: usbconfig.h
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: Christian Starkjohann
- * Creation Date: 2005-04-01
- * Tabsize: 4
- * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
- */
-
-#ifndef __usbconfig_h_included__
-#define __usbconfig_h_included__
-
-
-/*
-General Description:
-This file is an example configuration (with inline documentation) for the USB
-driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
-also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
-wire the lines to any other port, as long as D+ is also wired to INT0 (or any
-other hardware interrupt, as long as it is the highest level interrupt, see
-section at the end of this file).
-*/
-
-/* ---------------------------- Hardware Config ---------------------------- */
-
-#define USB_CFG_IOPORTNAME      D
-/* This is the port where the USB bus is connected. When you configure it to
- * "B", the registers PORTB, PINB and DDRB will be used.
- */
-#define USB_CFG_DMINUS_BIT      3
-/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
- * This may be any bit in the port.
- */
-#define USB_CFG_DPLUS_BIT       2
-/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
- * This may be any bit in the port. Please note that D+ must also be connected
- * to interrupt pin INT0! [You can also use other interrupts, see section
- * "Optional MCU Description" below, or you can connect D- to the interrupt, as
- * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
- * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
- * markers every millisecond.]
- */
-#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
-/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
- * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
- * require no crystal, they tolerate +/- 1% deviation from the nominal
- * frequency. All other rates require a precision of 2000 ppm and thus a
- * crystal!
- * Since F_CPU should be defined to your actual clock rate anyway, you should
- * not need to modify this setting.
- */
-#define USB_CFG_CHECK_CRC       0
-/* Define this to 1 if you want that the driver checks integrity of incoming
- * data packets (CRC checks). CRC checks cost quite a bit of code size and are
- * currently only available for 18 MHz crystal clock. You must choose
- * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
- */
-
-/* ----------------------- Optional Hardware Config ------------------------ */
-
-/* #define USB_CFG_PULLUP_IOPORTNAME   D */
-/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
- * V+, you can connect and disconnect the device from firmware by calling
- * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
- * This constant defines the port on which the pullup resistor is connected.
- */
-/* #define USB_CFG_PULLUP_BIT          4 */
-/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
- * above) where the 1.5k pullup resistor is connected. See description
- * above for details.
- */
-
-/* --------------------------- Functional Range ---------------------------- */
-
-#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
-/* Define this to 1 if you want to compile a version with two endpoints: The
- * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
- * number).
- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
-/* Define this to 1 if you want to compile a version with three endpoints: The
- * default control endpoint 0, an interrupt-in endpoint 3 (or the number
- * configured below) and a catch-all default interrupt-in endpoint as above.
- * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
- */
-#define USB_CFG_EP3_NUMBER              3
-/* If the so-called endpoint 3 is used, it can now be configured to any other
- * endpoint number (except 0) with this macro. Default if undefined is 3.
- */
-/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
-/* The above macro defines the startup condition for data toggling on the
- * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
- * Since the token is toggled BEFORE sending any data, the first packet is
- * sent with the oposite value of this configuration!
- */
-#define USB_CFG_IMPLEMENT_HALT          0
-/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
- * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
- * it is required by the standard. We have made it a config option because it
- * bloats the code considerably.
- */
-#define USB_CFG_SUPPRESS_INTR_CODE      0
-/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
- * want to send any data over them. If this macro is defined to 1, functions
- * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
- * you need the interrupt-in endpoints in order to comply to an interface
- * (e.g. HID), but never want to send any data. This option saves a couple
- * of bytes in flash memory and the transmit buffers in RAM.
- */
-#define USB_CFG_INTR_POLL_INTERVAL      10
-/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
- * interval. The value is in milliseconds and must not be less than 10 ms for
- * low speed devices.
- */
-#define USB_CFG_IS_SELF_POWERED         0
-/* Define this to 1 if the device has its own power supply. Set it to 0 if the
- * device is powered from the USB bus.
- */
-#define USB_CFG_MAX_BUS_POWER           100
-/* Set this variable to the maximum USB bus power consumption of your device.
- * The value is in milliamperes. [It will be divided by two since USB
- * communicates power requirements in units of 2 mA.]
- */
-#define USB_CFG_IMPLEMENT_FN_WRITE      1
-/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
- * transfers. Set it to 0 if you don't need it and want to save a couple of
- * bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_READ       0
-/* Set this to 1 if you need to send control replies which are generated
- * "on the fly" when usbFunctionRead() is called. If you only want to send
- * data from a static buffer, set it to 0 and return the data from
- * usbFunctionSetup(). This saves a couple of bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
-/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
- * You must implement the function usbFunctionWriteOut() which receives all
- * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
- * can be found in 'usbRxToken'.
- */
-#define USB_CFG_HAVE_FLOWCONTROL        0
-/* Define this to 1 if you want flowcontrol over USB data. See the definition
- * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
- * usbdrv.h.
- */
-#define USB_CFG_DRIVER_FLASH_PAGE       0
-/* If the device has more than 64 kBytes of flash, define this to the 64 k page
- * where the driver's constants (descriptors) are located. Or in other words:
- * Define this to 1 for boot loaders on the ATMega128.
- */
-#define USB_CFG_LONG_TRANSFERS          0
-/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
- * in a single control-in or control-out transfer. Note that the capability
- * for long transfers increases the driver size.
- */
-/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
-/* This macro is a hook if you want to do unconventional things. If it is
- * defined, it's inserted at the beginning of received message processing.
- * If you eat the received message and don't want default processing to
- * proceed, do a return after doing your things. One possible application
- * (besides debugging) is to flash a status LED on each packet.
- */
-/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
-/* This macro is a hook if you need to know when an USB RESET occurs. It has
- * one parameter which distinguishes between the start of RESET state and its
- * end.
- */
-/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
-/* This macro (if defined) is executed when a USB SET_ADDRESS request was
- * received.
- */
-#define USB_COUNT_SOF                   0
-/* define this macro to 1 if you need the global variable "usbSofCount" which
- * counts SOF packets. This feature requires that the hardware interrupt is
- * connected to D- instead of D+.
- */
-/* #ifdef __ASSEMBLER__
- * macro myAssemblerMacro
- *     in      YL, TCNT0
- *     sts     timer0Snapshot, YL
- *     endm
- * #endif
- * #define USB_SOF_HOOK                    myAssemblerMacro
- * This macro (if defined) is executed in the assembler module when a
- * Start Of Frame condition is detected. It is recommended to define it to
- * the name of an assembler macro which is defined here as well so that more
- * than one assembler instruction can be used. The macro may use the register
- * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
- * immediately after an SOF pulse may be lost and must be retried by the host.
- * What can you do with this hook? Since the SOF signal occurs exactly every
- * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
- * designs running on the internal RC oscillator.
- * Please note that Start Of Frame detection works only if D- is wired to the
- * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
- */
-#define USB_CFG_CHECK_DATA_TOGGLING     0
-/* define this macro to 1 if you want to filter out duplicate data packets
- * sent by the host. Duplicates occur only as a consequence of communication
- * errors, when the host does not receive an ACK. Please note that you need to
- * implement the filtering yourself in usbFunctionWriteOut() and
- * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
- * for each control- and out-endpoint to check for duplicate packets.
- */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
-/* define this macro to 1 if you want the function usbMeasureFrameLength()
- * compiled in. This function can be used to calibrate the AVR's RC oscillator.
- */
-#define USB_USE_FAST_CRC                0
-/* The assembler module has two implementations for the CRC algorithm. One is
- * faster, the other is smaller. This CRC routine is only used for transmitted
- * messages where timing is not critical. The faster routine needs 31 cycles
- * per byte while the smaller one needs 61 to 69 cycles. The faster routine
- * may be worth the 32 bytes bigger code size if you transmit lots of data and
- * run the AVR close to its limit.
- */
-
-/* -------------------------- Device Description --------------------------- */
-
-#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
-/* USB vendor ID for the device, low byte first. If you have registered your
- * own Vendor ID, define it here. Otherwise you may use one of obdev's free
- * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
-/* This is the ID of the product, low byte first. It is interpreted in the
- * scope of the vendor ID. If you have registered your own VID with usb.org
- * or if you have licensed a PID from somebody else, define it here. Otherwise
- * you may use one of obdev's free shared VID/PID pairs. See the file
- * USB-IDs-for-free.txt for details!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_VERSION  0x00, 0x01
-/* Version number of the device: Minor number first, then major number.
- */
-#define USB_CFG_VENDOR_NAME     't', '.', 'm', '.', 'k', '.'
-#define USB_CFG_VENDOR_NAME_LEN 6
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME     'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
-#define USB_CFG_DEVICE_NAME_LEN 23
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
-#define USB_CFG_DEVICE_CLASS        0
-#define USB_CFG_DEVICE_SUBCLASS     0
-/* See USB specification if you want to conform to an existing device class.
- * Class 0xff is "vendor specific".
- */
-#define USB_CFG_INTERFACE_CLASS     3   /* HID */
-#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
-#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
-/* See USB specification if you want to conform to an existing device class or
- * protocol. The following classes must be set at interface level:
- * HID class is 3, no subclass and protocol required (but may be useful!)
- * CDC class is 2, use subclass 2 and protocol 1 for ACM
- */
-#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
-/* Define this to the length of the HID report descriptor, if you implement
- * an HID device. Otherwise don't define it or define it to 0.
- * If you use this define, you must add a PROGMEM character array named
- * "usbHidReportDescriptor" to your code which contains the report descriptor.
- * Don't forget to keep the array and this define in sync!
- */
-
-/* #define USB_PUBLIC static */
-/* Use the define above if you #include usbdrv.c instead of linking against it.
- * This technique saves a couple of bytes in flash memory.
- */
-
-/* ------------------- Fine Control over USB Descriptors ------------------- */
-/* If you don't want to use the driver's default USB descriptors, you can
- * provide our own. These can be provided as (1) fixed length static data in
- * flash memory, (2) fixed length static data in RAM or (3) dynamically at
- * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
- * information about this function.
- * Descriptor handling is configured through the descriptor's properties. If
- * no properties are defined or if they are 0, the default descriptor is used.
- * Possible properties are:
- *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
- *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
- *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
- *     you want RAM pointers.
- *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
- *     in static memory is in RAM, not in flash memory.
- *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
- *     the driver must know the descriptor's length. The descriptor itself is
- *     found at the address of a well known identifier (see below).
- * List of static descriptor names (must be declared PROGMEM if in flash):
- *   char usbDescriptorDevice[];
- *   char usbDescriptorConfiguration[];
- *   char usbDescriptorHidReport[];
- *   char usbDescriptorString0[];
- *   int usbDescriptorStringVendor[];
- *   int usbDescriptorStringDevice[];
- *   int usbDescriptorStringSerialNumber[];
- * Other descriptors can't be provided statically, they must be provided
- * dynamically at runtime.
- *
- * Descriptor properties are or-ed or added together, e.g.:
- * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
- *
- * The following descriptors are defined:
- *   USB_CFG_DESCR_PROPS_DEVICE
- *   USB_CFG_DESCR_PROPS_CONFIGURATION
- *   USB_CFG_DESCR_PROPS_STRINGS
- *   USB_CFG_DESCR_PROPS_STRING_0
- *   USB_CFG_DESCR_PROPS_STRING_VENDOR
- *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
- *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
- *   USB_CFG_DESCR_PROPS_HID
- *   USB_CFG_DESCR_PROPS_HID_REPORT
- *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
- *
- * Note about string descriptors: String descriptors are not just strings, they
- * are Unicode strings prefixed with a 2 byte header. Example:
- * int  serialNumberDescriptor[] = {
- *     USB_STRING_DESCRIPTOR_HEADER(6),
- *     'S', 'e', 'r', 'i', 'a', 'l'
- * };
- */
-
-#define USB_CFG_DESCR_PROPS_DEVICE                  0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
-#define USB_CFG_DESCR_PROPS_STRINGS                 0
-#define USB_CFG_DESCR_PROPS_STRING_0                0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
-//#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
-#define USB_CFG_DESCR_PROPS_HID                     0
-#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
-#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
-
-/* ----------------------- Optional MCU Description ------------------------ */
-
-/* The following configurations have working defaults in usbdrv.h. You
- * usually don't need to set them explicitly. Only if you want to run
- * the driver on a device which is not yet supported or with a compiler
- * which is not fully supported (such as IAR C) or if you use a differnt
- * interrupt than INT0, you may have to define some of these.
- */
-/* #define USB_INTR_CFG            MCUCR */
-/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
-/* #define USB_INTR_CFG_CLR        0 */
-/* #define USB_INTR_ENABLE         GIMSK */
-/* #define USB_INTR_ENABLE_BIT     INT0 */
-/* #define USB_INTR_PENDING        GIFR */
-/* #define USB_INTR_PENDING_BIT    INTF0 */
-/* #define USB_INTR_VECTOR         INT0_vect */
-
-#endif /* __usbconfig_h_included__ */