m0110_usb: Change keymap and Makefile

8 files changed, 250 insertions, 286 deletions

diff --git a/converter/m0110_usb/Makefile.pjrc b/converter/m0110_usb/Makefile.tmk_rev1
index e82564218e..f36fcc4b5d 100644
--- a/converter/m0110_usb/Makefile.pjrc
+++ b/converter/m0110_usb/Makefile.tmk_rev1
@@ -1,5 +1,5 @@
 # Target file name (without extension).
-TARGET = m0110_pjrc
+TARGET = m0110_lufa
 
 # Directory common source filess exist
 TMK_DIR = ../../tmk_core
@@ -10,13 +10,14 @@ TARGET_DIR = .
 # keyboard dependent files
 SRC =	matrix.c \
 	led.c \
+	keymap_common.c \
 	m0110.c
 
 # To use own keymap file run make like: make keymap=hasu
-ifdef keymap
-    SRC += keymap_$(keymap).c
+ifdef KEYMAP
+    SRC += keymap_$(KEYMAP).c
 else
-    SRC += keymap.c
+    SRC += keymap_default.c
 endif
 
 CONFIG_H = config.h
@@ -24,10 +25,8 @@ CONFIG_H = config.h
 
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
+#MCU = atmega32u2       # TMK converter rev2
+MCU = atmega32u4       # TMK converter rev1
 
 
 # Processor frequency.
@@ -38,6 +37,29 @@ MCU = atmega32u4       # Teensy 2.0
 F_CPU = 16000000
 
 
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
 # Boot Section Size in bytes
 #   Teensy halfKay   512
 #   Atmel DFU loader 4096
@@ -55,6 +77,7 @@ CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+#KEYMAP_SECTION_ENABLE = yes	# fixed address keymap for keymap editor
 
 
 
@@ -67,7 +90,7 @@ VPATH += $(TARGET_DIR)
 VPATH += $(TMK_DIR)
 
 
-include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/protocol/lufa.mk
 include $(TMK_DIR)/protocol.mk
 include $(TMK_DIR)/common.mk
 include $(TMK_DIR)/rules.mk
diff --git a/converter/m0110_usb/Makefile.tmk_rev2 b/converter/m0110_usb/Makefile.tmk_rev2
new file mode 100644
index 0000000000..e836456326
--- /dev/null
+++ b/converter/m0110_usb/Makefile.tmk_rev2
@@ -0,0 +1,96 @@
+# Target file name (without extension).
+TARGET = m0110_lufa
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	matrix.c \
+	led.c \
+	keymap_common.c \
+	m0110.c
+
+# To use own keymap file run make like: make keymap=hasu
+ifdef KEYMAP
+    SRC += keymap_$(KEYMAP).c
+else
+    SRC += keymap_default.c
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u2       # TMK converter rev2
+#MCU = atmega32u4       # TMK converter rev1
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+#KEYMAP_SECTION_ENABLE = yes	# fixed address keymap for keymap editor
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
index c1ecb53b0b..bfd3261df5 100644
--- a/converter/m0110_usb/README.md
+++ b/converter/m0110_usb/README.md
@@ -59,19 +59,16 @@ To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to
 
     $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
     $ cd m0110_usb
-    $ make -f Makefile clean
-    $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}]
+    $ make -f Makefile.rev2 clean
+    $ make -f Makefile.rev2 [KEYMAP={default|intl|spacefn|hasu}]
 
-Use `Makefile.teensy` instead for Teensy.
+Use `Maefile.tmk_rev1` for TMK converter Rev.1, `Makefile.teensy` for Teensy instead.
 
 
 
 Keymap
 ------
-To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this.
-
-    $ make -f Makefile clean
-    $ make -f Makefile KEYMAP=name
+To create your own keymap copy existent keymap file to `keymap_name.c` and edit it.
 
 
 
diff --git a/converter/m0110_usb/keymap_common.h b/converter/m0110_usb/keymap_common.h
index 8bde7473dd..925556d977 100644
--- a/converter/m0110_usb/keymap_common.h
+++ b/converter/m0110_usb/keymap_common.h
@@ -1,5 +1,5 @@
 /*
-Copyright 2011,2012,2014 Jun Wako <wakojun@gmail.com>
+Copyright 2011,2012,2014,2015 Jun Wako <wakojun@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -24,64 +24,49 @@ extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
 extern const uint16_t fn_actions[];
 
 
-/* 
- * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
- * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
- * on the M0110A, but since it generates a unique scan code which is not used for some other key in
- * the M0110A, they are totally interchangeable.  In fact, the M0110A is functionally (almost)
- * identical to the combination of the M0110 along with the M0120 keypad. The only difference
- * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
- * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
- * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
- * substituted the [comma] key with the [=] key, however its scancode is the same.
+/* Common layout for M0110 and M0110A
+ * This keymap works with both keyboards. As you can see, the M0110A is 
+ * a superset of M0110 keyboard, only one exception is 'Enter'(34) of M0110
+ * does not exist on the M0110A.
  *
- * Physical layout:
- * M0110A
  * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Bcksp| |Clr|  =|  /|  *|
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
  * |---------------------------------------------------------| |---------------|
  * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
  * |-----------------------------------------------------'   | |---------------|
  * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
  * |---------------------------------------------------------| |---------------|
  * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
- * |---------------------------------------------------------' |-----------|Ent|
- * |Opt  |Mac    |           Space           |  \|Lft|Rgt|Dn | |      0|  .|   |
+ * |---------------------------------------------------------| |-----------|Ent|
+ * |Opt  |Mac    |         Space         |Ent|  \|Lft|Rgt|Dn | |      0|  .|   |
  * `---------------------------------------------------------' `---------------'
  *
- * M0110                                                       M0120
+ * M0110A scan codes
  * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  -|  +|  *|
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33| | 47| 68| 6D| 62|
  * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
- * |---------------------------------------------------------| |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
+ * |   30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E|   | | 59| 5B| 5C| 4E|
+ * |-----------------------------------------------------'   | |---------------|
+ * |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27|    24| | 56| 57| 58| 66|
  * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
- * `---------------------------------------------------------' |-----------|Ent|
- *      |Opt|Mac |         Space               |Ent |Opt|      |      0|  .|   |
- *      `-----------------------------------------------'      `---------------'
- * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down)
+ * |      38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C|  38| 4D| | 53| 54| 55|   |
+ * `---------------------------------------------------------' |-----------| 4C|
+ * |   3A|     37|             31            | 2A| 46| 42| 48| |     52| 41|   |
+ * `---------------------------------------------------------' `---------------'
  *
- * NOTE: \ is located differently.
- * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A).
- * NOTE: Left Shift and right Shift are logically same key.
- * NOTE: Left Option and right Option are logically same key.
- */
-
-/* Keymap definition Macro
+ * M0110 + M0120 scan codes
  * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33| | 47| 68| 6D| 62|
  * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
- * |-----------------------------------------------------'   | |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+ * |   30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E|
  * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
- * |---------------------------------------------------------| |-----------|Ent|
- * |Opt  |Mac    |         Space         |Ent|  \|Lft|Rgt|Dn | |      0|  .|   |
- * `---------------------------------------------------------' `---------------'
- * NOTE: Ent between Space and \ means Enter on M0110.
+ * |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27|    24| | 56| 57| 58| 66|
+ * |---------------------------------------------------------| |---------------|
+ * |      38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C|      38| | 53| 54| 55|   |
+ * `---------------------------------------------------------' |-----------| 4C|
+ *      | 3A|  37|             31              |   34| 3A|     |     52| 41|   |
+ *      `------------------------------------------------'     `---------------'
+ * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two.
  */
 #define KEYMAP( \
     K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
@@ -106,25 +91,30 @@ extern const uint16_t fn_actions[];
     { KC_##K68, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K6D, KC_NO,    KC_NO    }, \
 }
 
-/* International keyboard
- *  ,---------------------------------------------------------.
- *  | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33|
- *  |---------------------------------------------------------|
- *  |   30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A|
- *  |------------------------------------------------------,  |
- *  |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24|  |
- *  |---------------------------------------------------------|
- *  |  38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A|      38|
- *  `---------------------------------------------------------'
- *       | 3A|  37|             34              |   31| 3A|
- *       `------------------------------------------------'
+/* International keyboard layout for M0110 + M0120
+ * https://en.wikipedia.org/wiki/File:Apple_Macintosh_Plus_Keyboard.jpg
+ * Probably International keyboard layout of M0110A doesn't exist.
+ *
+ * M0110 + M0120 scan codes
+ * ,---------------------------------------------------------. ,---------------.
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33| | 47| 68| 6D| 62|
+ * |---------------------------------------------------------| |---------------|
+ * |   30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E|
+ * |------------------------------------------------------,  | |---------------|
+ * |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24|  | | 56| 57| 58| 66|
+ * |---------------------------------------------------------| |---------------|
+ * |  38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A|      38| | 53| 54| 55|   |
+ * `---------------------------------------------------------' |-----------| 4C|
+ *      | 3A|  37|             34              |   31| 3A|     |     52| 41|   |
+ *      `------------------------------------------------'     `---------------'
+ * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two.
  */
 #define KEYMAP_INTL( \
     K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
     K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A,  K59,K5B,K5C,K4E, \
     K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24,      K56,K57,K58,K66, \
-    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A,    K4D,  K53,K54,K55,K4C, \
-    K3A,K37,            K34,            K31,    K46,K42,K48,  K52,    K41      \
+    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A,          K53,K54,K55,K4C, \
+        K3A,K37,            K34,                K31,          K52,    K41      \
 ) { \
     { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
     { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
@@ -134,8 +124,8 @@ extern const uint16_t fn_actions[];
     { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
     { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO,    KC_NO,    KC_##K37 }, \
     { KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_##K47 }, \
-    { KC_##K48, KC_NO,    KC_NO,    KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_NO    }, \
+    { KC_NO,    KC_##K41, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K47 }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K4C, KC_NO,    KC_##K4E, KC_NO    }, \
     { KC_NO,    KC_NO,    KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
     { KC_##K58, KC_##K59, KC_NO,    KC_##K5B, KC_##K5C, KC_NO,    KC_NO,    KC_NO    }, \
     { KC_NO,    KC_NO,    KC_##K62, KC_NO,    KC_NO,    KC_NO,    KC_##K66, KC_NO    }, \
diff --git a/converter/m0110_usb/keymap_default.c b/converter/m0110_usb/keymap_default.c
index b0b8ee220a..ff7478d1b5 100644
--- a/converter/m0110_usb/keymap_default.c
+++ b/converter/m0110_usb/keymap_default.c
@@ -20,15 +20,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 
+#ifdef KEYMAP_SECTION_ENABLE
+const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
+#else
 const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+#endif
     /* Default:
      * M0110                                                       M0120
      * ,---------------------------------------------------------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  -|  +|  *|
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  =|  /|  *|
      * |---------------------------------------------------------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  -|
      * |---------------------------------------------------------| |---------------|
-     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
      * |---------------------------------------------------------| |---------------|
      * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
      * `---------------------------------------------------------' |-----------|Ent|
@@ -52,27 +56,40 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
     TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
     LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,     P4,  P5,  P6,  PPLS,
     LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
-    LALT,LGUI,               SPC,                FN0, BSLS,LEFT,RGHT,DOWN,    P0,       PDOT
+    LALT,LGUI,               SPC,                FN0, FN13,LEFT,RGHT,DOWN,    P0,       PDOT
     ),
-    /* Cursor Layer
+    /* Cursor Layer:
+     * M0110                                                       M0120
      * ,---------------------------------------------------------. ,---------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  -|  +|  *|
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
      * |---------------------------------------------------------| |---------------|
-     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |   |INS| |  7|  8|  9|  /|
+     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |INS|   | |  7|  8|  9|  -|
      * |---------------------------------------------------------| |---------------|
-     * |Ctrl  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |  4|  5|  6|  ,|
+     * |Ctrl  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |  4|  5|  6|  +|
      * |---------------------------------------------------------| |---------------|
      * |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shift   | |  1|  2|  3|   |
      * `---------------------------------------------------------' |-----------|Ent|
      *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
      *      `-----------------------------------------------'      `---------------'
+     * M0110A
+     * ,---------------------------------------------------------. ,---------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |INS|   | |  7|  8|  9|  -|
+     * |-----------------------------------------------------'   | |---------------|
+     * |Ctrl  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |  4|  5|  6|  +|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shft|PgU| |  1|  2|  3|   |
+     * |---------------------------------------------------------| |-----------|Ent|
+     * |Opt  |Mac    |         Space             |  \|Hom|End|PgD| |      0|  .|   |
+     * `---------------------------------------------------------' `---------------'
      */
     [1] = KEYMAP(
     ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,           P7,  P8,  P9,  PMNS,
+    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  INS,          P7,  P8,  P9,  PMNS,
     LCTL,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     ENT,     P4,  P5,  P6,  PPLS,
     LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
-    LALT,LGUI,               SPC,                FN0, INS, HOME,END, PGDN,    P0,       PDOT
+    LALT,LGUI,               SPC,                FN0, FN13,HOME,END, PGDN,    P0,       PDOT
     ),
 };
 
@@ -80,6 +97,41 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
 /*
  * Fn action definition
  */
+#ifdef KEYMAP_SECTION_ENABLE
+const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
+#else
 const uint16_t fn_actions[] PROGMEM = {
+#endif
     [0]  = ACTION_LAYER_MOMENTARY(1),
+    [1]  = ACTION_LAYER_MOMENTARY(2),
+    [2]  = ACTION_LAYER_MOMENTARY(3),
+    [3]  = ACTION_LAYER_MOMENTARY(4),
+    [4]  = ACTION_LAYER_MOMENTARY(5),
+    [5]  = ACTION_LAYER_MOMENTARY(6),
+    [6]  = ACTION_LAYER_MOMENTARY(7),
+    [7]  = ACTION_LAYER_TOGGLE(1),
+    [8]  = ACTION_LAYER_TOGGLE(2),
+    [9]  = ACTION_LAYER_TOGGLE(3),
+    [10] = ACTION_LAYER_TAP_TOGGLE(1),
+    [11] = ACTION_LAYER_TAP_TOGGLE(2),
+    [12] = ACTION_LAYER_TAP_TOGGLE(3),
+    [13] = ACTION_LAYER_TAP_KEY(1, KC_BSLASH),
+    [14] = ACTION_LAYER_TAP_KEY(2, KC_TAB),
+    [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER),
+    [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
+    [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
+    [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
+    [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
+    [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
+    [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
+    [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
+    [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
+    [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
+    [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
+    [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
+    [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
+    [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
+    [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
+    [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE),
+    [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH),
 };
diff --git a/converter/m0110_usb/keymap_for_editor.c b/converter/m0110_usb/keymap_for_editor.c
deleted file mode 100644
index d20f298f87..0000000000
--- a/converter/m0110_usb/keymap_for_editor.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <stdint.h>
-#include "keycode.h"
-#include "keymap_common.h"
-
-
-#ifdef KEYMAP_SECTION_ENABLE
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
-#else
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
-#endif
-    /* Default:
-     * ,---------------------------------------------------------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
-     * |-----------------------------------------------------'   | |---------------|
-     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter | |  4|  5|  6|  +|
-     * |---------------------------------------------------------| |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
-     * |---------------------------------------------------------| |-----------|Ent|
-     * |Ctl  |Gui    |         Space         |Alt|  \|Lft|Rgt|Dn | |      0|  .|   |
-     * `---------------------------------------------------------' `---------------'
-     */
-    [0] = KEYMAP(
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    CLR, EQL, PSLS,PAST,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
-    LCAP,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     FN15,    P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
-    LCTL,LGUI,               FN16,               LALT,FN31,LEFT,RGHT,DOWN,    P0,       PDOT
-    ),
-    /* Cursor Layer(WASD, IJKL)
-     * ,---------------------------------------------------------. ,---------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|   | |  7|  8|  9|  -|
-     * |-----------------------------------------------------'   | |---------------|
-     * |Caps  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Enter | |  4|  5|  6|  +|
-     * |---------------------------------------------------------| |---------------|
-     * |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shif|PgU| |  1|  2|  3|   |
-     * |---------------------------------------------------------| |-----------|Ent|
-     * |Ctl  |Gui    |         Space        |Alt |  \|Hom|End|PgD| |      0|  .|   |
-     * `---------------------------------------------------------' `---------------'
-     */
-    [3] = KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  INS,          P7,  P8,  P9,  PMNS,
-    LCAP,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN15,    P4,  P5,  P6,  PPLS,
-    LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
-    LCTL,LGUI,               FN16,               LALT,FN31,HOME,END, PGDN,    P0,       PDOT
-    ),
-    [4] = KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  INS,          P7,  P8,  P9,  PMNS,
-    LCAP,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN15,    P4,  P5,  P6,  PPLS,
-    LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
-    LCTL,LGUI,               FN16,               LALT,FN31,HOME,END, PGDN,    P0,       PDOT
-    ),
-    [7] = {},
-};
-
-
-/*
- * Fn action definition
- */
-#ifdef KEYMAP_SECTION_ENABLE
-const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
-#else
-const uint16_t fn_actions[] PROGMEM = {
-#endif
-    [0]  = ACTION_LAYER_MOMENTARY(1),
-    [1]  = ACTION_LAYER_MOMENTARY(2),
-    [2]  = ACTION_LAYER_MOMENTARY(3),
-    [3]  = ACTION_LAYER_MOMENTARY(4),
-    [4]  = ACTION_LAYER_MOMENTARY(5),
-    [5]  = ACTION_LAYER_MOMENTARY(6),
-    [6]  = ACTION_LAYER_MOMENTARY(7),
-    [7]  = ACTION_LAYER_TOGGLE(1),
-    [8]  = ACTION_LAYER_TOGGLE(2),
-    [9]  = ACTION_LAYER_TOGGLE(3),
-    [10] = ACTION_LAYER_TAP_TOGGLE(1),
-    [11] = ACTION_LAYER_TAP_TOGGLE(2),
-    [12] = ACTION_LAYER_TAP_TOGGLE(3),
-    [13] = ACTION_LAYER_TAP_KEY(1, KC_F),
-    [14] = ACTION_LAYER_TAP_KEY(2, KC_J),
-    [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER),
-    [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
-    [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
-    [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
-    [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
-    [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
-    [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
-    [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
-    [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
-    [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
-    [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
-    [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
-    [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
-    [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
-    [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
-    [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE),
-    [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH),
-};
diff --git a/converter/m0110_usb/keymap_intl.c b/converter/m0110_usb/keymap_intl.c
index 80b029305f..6cc251a289 100644
--- a/converter/m0110_usb/keymap_intl.c
+++ b/converter/m0110_usb/keymap_intl.c
@@ -30,29 +30,17 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
      * |------------------------------------------------------,  | |---------------|
      * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \|  | |  4|  5|  6|  ,|
      * |---------------------------------------------------------| |---------------|
-     * |Shif|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
+     * |Shif|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|        | |  1|  2|  3|   |
      * `---------------------------------------------------------' |-----------|Ent|
-     *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+     *      |Opt|Mac |         Space               |Fn  |   |      |      0|  .|   |
      *      `-----------------------------------------------'      `---------------'
-     * M0110A(not existent?)
-     * ,---------------------------------------------------------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  =|  /|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Ret| |  7|  8|  9|  -|
-     * |------------------------------------------------------,  | |---------------|
-     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \|  | |  4|  5|  6|  +|
-     * |---------------------------------------------------------| |---------------|
-     * |Shif|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
-     * |---------------------------------------------------------| |-----------|Ent|
-     * |Opt  |Mac    |         Space             |  \|Lft|Rgt|Dn | |      0|  .|   |
-     * `---------------------------------------------------------' `---------------'
      */
     [0] = KEYMAP_INTL(
     GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    NLCK,EQL, PSLS,PAST,
     TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,ENT,     P7,  P8,  P9,  PMNS,
     LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,BSLS,         P4,  P5,  P6,  PPLS,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     UP,      P1,  P2,  P3,  PENT,
-    LALT,LGUI,               SPC,                FN0,      LEFT,RGHT,DOWN,    P0,       PDOT
+    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,              P1,  P2,  P3,  PENT,
+         LALT,LGUI,               SPC,                     FN0,               P0,       PDOT
     ),
     /* Cursor Layer
      * ,---------------------------------------------------------. ,---------------.
@@ -62,17 +50,17 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
      * |------------------------------------------------------,  | |---------------|
      * |Ctrl  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Ins|  | |  4|  5|  6|  ,|
      * |---------------------------------------------------------| |---------------|
-     * |Shif|  <|End|   |PgD|   |   |   |   |End|PgD|Dow|Shift   | |  1|  2|  3|   |
+     * |Shif|  <|End|   |PgD|   |   |   |   |End|PgD|Dow|        | |  1|  2|  3|   |
      * `---------------------------------------------------------' |-----------|Ent|
-     *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+     *      |Opt|Mac |         Space               |Fn  |   |      |      0|  .|   |
      *      `-----------------------------------------------'      `---------------'
      */
     [1] = KEYMAP_INTL(
     ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
     CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,  ENT,     P7,  P8,  P9,  PMNS,
     LCTL,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,INS,          P4,  P5,  P6,  PPLS,
-    LSFT,NO,  END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,     PGUP,    P1,  P2,  P3,  PENT,
-    LALT,LGUI,               SPC,                FN0,      HOME,END, PGDN,    P0,       PDOT
+    LSFT,NO,  END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,              P1,  P2,  P3,  PENT,
+         LALT,LGUI,               SPC,                     FN0,               P0,       PDOT
     ),
 };
 
diff --git a/converter/m0110_usb/keymap_plain.c b/converter/m0110_usb/keymap_plain.c
deleted file mode 100644
index d1507fcaa9..0000000000
--- a/converter/m0110_usb/keymap_plain.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <stdint.h>
-#include "keycode.h"
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Default:
-     * M0110                                                       M0120
-     * ,---------------------------------------------------------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  -|  +|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
-     * |---------------------------------------------------------| |---------------|
-     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
-     * |---------------------------------------------------------| |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
-     * `---------------------------------------------------------' |-----------|Ent|
-     *      |Opt|Mac |         Space               |Mac |Opt|      |      0|  .|   |
-     *      `-----------------------------------------------'      `---------------'
-     *  M0110A
-     * ,---------------------------------------------------------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Bcksp| |Nlk|  =|  /|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
-     * |-----------------------------------------------------'   | |---------------|
-     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
-     * |---------------------------------------------------------| |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
-     * |---------------------------------------------------------' |-----------|Ent|
-     * |Opt  |Mac    |           Space           |  \|Lft|Rgt|Dn | |      0|  .|   |
-     * `---------------------------------------------------------' `---------------'
-     */
-    [0] = KEYMAP(
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    NLCK,PEQL,PSLS,PAST,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
-    LCAP,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,     P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
-    LALT,LGUI,               SPC,                RGUI,BSLS,LEFT,RGHT,DOWN,    P0,       PDOT
-    ),
-};
-
-/*
- * Fn action definition
- */
-const uint16_t fn_actions[] PROGMEM = {
-};
-
-