Consolidate modelm v2 (#14996)

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>

89 files changed, 293 insertions, 105 deletions

diff --git a/data/mappings/keyboard_aliases.hjson b/data/mappings/keyboard_aliases.hjson
index 7b27f3415b..a656288a8f 100644
--- a/data/mappings/keyboard_aliases.hjson
+++ b/data/mappings/keyboard_aliases.hjson
@@ -41,6 +41,9 @@
     "angel64": {
         "target": "angel64/alpha"
     },
+    "ashpil/modelm_usbc": {
+        "target": "ibm/model_m/ashpil_usbc"
+    },
     "at101_blackheart": {
         "target": "viktus/at101_bh"
     },
@@ -113,6 +116,15 @@
     "cmm_studio/saka68": {
         "target": "cmm_studio/saka68/solder"
     },
+    "converter/modelm101": {
+        "target": "ibm/model_m/teensypp"
+    },
+    "converter/modelm101_teensy2": {
+        "target": "ibm/model_m/teensy2"
+    },
+    "converter/modelm_ssk": {
+        "target": "ibm/model_m_ssk/teensypp_ssk"
+    },
     "cospad": {
         "target": "kprepublic/cospad"
     },
@@ -203,6 +215,9 @@
     "handwired/ferris": {
         "target": "ferris/0_1"
     },
+    "handwired/ibm122m": {
+        "target": "ibm/model_m_122/ibm122m"
+    },
     "handwired/p1800fl": {
         "target": "team0110/p1800fl"
     },
@@ -425,6 +440,9 @@
     "montsinger/rebound": {
         "target": "montsinger/rebound/rev1"
     },
+    "mschwingen/modelm": {
+        "target": "ibm/model_m/mschwingen"
+    },
     "noxary/268_2": {
         "layouts": {
             "LAYOUT": "LAYOUT_65_ansi_blocker"
@@ -1246,6 +1264,9 @@
     "treadstone48/rev2": {
         "target": "marksard/treadstone48/rev2"
     },
+    "tronguylabs/m122_3270": {
+        "target": "ibm/model_m_122/m122_3270"
+    },
     "ua62": {
         "target": "nacly/ua62"
     },
@@ -1306,6 +1327,9 @@
     "ymdk_np21": {
         "target": "ymdk/np21"
     },
+    "yugo_m/model_m_101": {
+        "target": "ibm/model_m/yugo_m"
+    },
     "yurei": {
         "target": "kkatano/yurei"
     },
diff --git a/docs/ChangeLog/20230528/PR14996.md b/docs/ChangeLog/20230528/PR14996.md
new file mode 100644
index 0000000000..d59b407e4c
--- /dev/null
+++ b/docs/ChangeLog/20230528/PR14996.md
@@ -0,0 +1,21 @@
+# QMK Breaking Changes - 2023 May 28 Changelog
+
+## Notable Features :id=notable-features
+
+### Consolidate modelm ([#14996](https://github.com/qmk/qmk_firmware/pull/14996)
+
+Several build targets for the IBM Model M were cluttered in different folders.
+The maintainers of several Model M replacement controller projects agreed to
+consolidate them under one common folder.
+
+List of the consolidations now in keyboards/modelm/:
+
+- ashpil_usbc 
+- ibm122m
+- mschwingen
+- teensy2 (renamed from modelm101_teensy2)
+- teensypp (renamed from modelm101)
+- teensypp_ssk (renamed from modelm_ssk)
+- ibm122m
+- m122_3270
+- yugo_m
diff --git a/keyboards/handwired/ibm122m/readme.md b/keyboards/handwired/ibm122m/readme.md
deleted file mode 100644
index de89d7596e..0000000000
--- a/keyboards/handwired/ibm122m/readme.md
+++ /dev/null
@@ -1,16 +0,0 @@
-# ibm122m
-
-![IBM Model M 122 key](https://i.imgur.com/Oo3Ozqz.jpg)
-
-This is a keymap for the IBM Model M 122 key terminal keyboard running on a Teensy 2.0++
-I wired it to weird pins on mine (mainly to accomodate speakers), so make sure to update the pin arrays.
-
-Keyboard Maintainer: [Luke Stanley](https://github.com/lukexorz)  
-Hardware Supported: Teensy 2.0++  
-Hardware Availability: https://www.pjrc.com/store/teensypp.html 
-
-Make example for this keyboard (after setting up your build environment):
-
-    make handwired/ibm122m:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/ashpil/modelm_usbc/modelm_usbc.c b/keyboards/ibm/model_m/ashpil_usbc/ashpil_usbc.c
index 92b577635c..92b577635c 100644
--- a/keyboards/ashpil/modelm_usbc/modelm_usbc.c
+++ b/keyboards/ibm/model_m/ashpil_usbc/ashpil_usbc.c
diff --git a/keyboards/ashpil/modelm_usbc/info.json b/keyboards/ibm/model_m/ashpil_usbc/info.json
index 4d8eec3167..ffdb608edc 100644
--- a/keyboards/ashpil/modelm_usbc/info.json
+++ b/keyboards/ibm/model_m/ashpil_usbc/info.json
@@ -1,7 +1,7 @@
 {
     "keyboard_name": "IBM Model M 101/102",
     "manufacturer": "ashpil",
-    "url": "https://github.com/ashpil/qmk_firmware/tree/master/keyboards/ashpil/modelm_usbc",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/ashpil_usbc",
     "maintainer": "ashpil",
     "usb": {
         "vid": "0xFEED",
diff --git a/keyboards/ashpil/modelm_usbc/keymaps/ashpil/config.h b/keyboards/ibm/model_m/ashpil_usbc/keymaps/ashpil/config.h
index 59cec33010..59cec33010 100644
--- a/keyboards/ashpil/modelm_usbc/keymaps/ashpil/config.h
+++ b/keyboards/ibm/model_m/ashpil_usbc/keymaps/ashpil/config.h
diff --git a/keyboards/ashpil/modelm_usbc/keymaps/ashpil/keymap.c b/keyboards/ibm/model_m/ashpil_usbc/keymaps/ashpil/keymap.c
index e8df1f0c81..e8df1f0c81 100644
--- a/keyboards/ashpil/modelm_usbc/keymaps/ashpil/keymap.c
+++ b/keyboards/ibm/model_m/ashpil_usbc/keymaps/ashpil/keymap.c
diff --git a/keyboards/ashpil/modelm_usbc/keymaps/ashpil/rules.mk b/keyboards/ibm/model_m/ashpil_usbc/keymaps/ashpil/rules.mk
index 23b7c173b8..23b7c173b8 100644
--- a/keyboards/ashpil/modelm_usbc/keymaps/ashpil/rules.mk
+++ b/keyboards/ibm/model_m/ashpil_usbc/keymaps/ashpil/rules.mk
diff --git a/keyboards/ashpil/modelm_usbc/keymaps/default/keymap.c b/keyboards/ibm/model_m/ashpil_usbc/keymaps/default/keymap.c
index d8f80a5c72..d8f80a5c72 100644
--- a/keyboards/ashpil/modelm_usbc/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m/ashpil_usbc/keymaps/default/keymap.c
diff --git a/keyboards/ashpil/modelm_usbc/readme.md b/keyboards/ibm/model_m/ashpil_usbc/readme.md
index 261d97ab49..801cb612fd 100644
--- a/keyboards/ashpil/modelm_usbc/readme.md
+++ b/keyboards/ibm/model_m/ashpil_usbc/readme.md
@@ -9,6 +9,6 @@ This is a configuration of QMK intended to be used with the [USB C Model M alt c
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ashpil/modelm_usbc:default
+    make ibm/model_m/ashpil_usbc:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ashpil/modelm_usbc/rules.mk b/keyboards/ibm/model_m/ashpil_usbc/rules.mk
index 6fe874e748..6fe874e748 100644
--- a/keyboards/ashpil/modelm_usbc/rules.mk
+++ b/keyboards/ibm/model_m/ashpil_usbc/rules.mk
diff --git a/keyboards/ibm/model_m/modelm/readme.md b/keyboards/ibm/model_m/modelm/readme.md
new file mode 100644
index 0000000000..048b02495a
--- /dev/null
+++ b/keyboards/ibm/model_m/modelm/readme.md
@@ -0,0 +1,24 @@
+# IBM Model M
+
+This is the parent directory for all projects that replace the controller
+of IBM's Model M Keyboard and then run QMK on it.
+
+These controllers differ in their use of microcontrollers, connection (mainly
+USB) optional speakers etc.
+
+Some of them can be bought fully assembled others are do-it-yourself.
+
+## Warning - Model M Variants
+
+**Not all of these projects will fit into your keyboard!**
+
+As the Model M was produced over several years there are many variants of the
+controller PCB. Check what fits your keyboard before you build/order one.
+
+The variants built for PCs differ in:
+* PCB size
+* Connectors (8/12 pin flex, location)
+* Ground wire connector location
+
+Additionally IBM built Model M variants for terminals with 122 keys, the 
+space saving keyboard (SSK, 84-key) etc.
diff --git a/keyboards/mschwingen/modelm/config.h b/keyboards/ibm/model_m/mschwingen/config.h
index c828bd36ff..b1dc81b8c7 100644
--- a/keyboards/mschwingen/modelm/config.h
+++ b/keyboards/ibm/model_m/mschwingen/config.h
@@ -56,15 +56,15 @@
 #define MODELM_LED2 B6
 #define MODELM_LED3 D0
 
-#if defined(KEYBOARD_mschwingen_modelm_led_wired)
+#if defined(KEYBOARD_ibm_model_m_mschwingen_led_wired)
 # define MODELM_LED_CAPSLOCK  MODELM_LED1
 # define MODELM_LED_SCROLLOCK MODELM_LED2
 # define MODELM_LED_NUMLOCK   MODELM_LED3
-#elif defined(KEYBOARD_mschwingen_modelm_led_ffc)
+#elif defined(KEYBOARD_ibm_model_m_mschwingen_led_ffc)
 # define MODELM_LED_CAPSLOCK  MODELM_LED2
 # define MODELM_LED_SCROLLOCK MODELM_LED3
 # define MODELM_LED_NUMLOCK   MODELM_LED1
-#elif defined(KEYBOARD_mschwingen_modelm_led_ws2812)
+#elif defined(KEYBOARD_ibm_model_m_mschwingen_led_ws2812)
 #else
 # error one of MODELM_LEDS_FFC, MODELM_LEDS_WIRED or MODELM_LEDS_WS2812 must be set!
 #endif
diff --git a/keyboards/mschwingen/modelm/info.json b/keyboards/ibm/model_m/mschwingen/info.json
index 8005f5e7f7..1ba525de6c 100644
--- a/keyboards/mschwingen/modelm/info.json
+++ b/keyboards/ibm/model_m/mschwingen/info.json
@@ -1,7 +1,7 @@
 {
-    "keyboard_name": "IBM Model M 101/102",
+    "keyboard_name": "atmega32U4 board for IBM Model M",
     "manufacturer": "mschwingen",
-    "url": "",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/mschwingen",
     "maintainer": "mschwingen",
     "usb": {
         "vid": "0xFEED",
diff --git a/keyboards/mschwingen/modelm/keymaps/default/keymap.c b/keyboards/ibm/model_m/mschwingen/keymaps/default/keymap.c
index 8e28b4e449..8e28b4e449 100644
--- a/keyboards/mschwingen/modelm/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m/mschwingen/keymaps/default/keymap.c
diff --git a/keyboards/ibm/model_m/mschwingen/led_ffc/readme.md b/keyboards/ibm/model_m/mschwingen/led_ffc/readme.md
new file mode 100644
index 0000000000..722567c18f
--- /dev/null
+++ b/keyboards/ibm/model_m/mschwingen/led_ffc/readme.md
@@ -0,0 +1,21 @@
+# atmega32U4 board for IBM Model M, LEDs connected with flexible flat cable (FFC)
+
+![modelm](https://raw.githubusercontent.com/mschwingen/hardware/master/modelm-usb/images/PCB.jpg)
+
+This is a configuration of QMK intended to be used with the [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb).
+
+* Keyboard Maintainer: [Michael Schwingen](https://github.com/mschwingen/)
+* Hardware Supported: [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb)
+* Hardware Availability: need to build your own.
+
+Make example for this keyboard (after setting up your build environment), run one of:
+
+    make ibm/model_m/mschwingen/led_ffc:default
+
+Flashing example for this keyboard:
+
+    make ibm/model_m/mschwingen/led_ffc:default:flash
+
+Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/mschwingen/modelm/led_ffc/rules.mk b/keyboards/ibm/model_m/mschwingen/led_ffc/rules.mk
index 8b13789179..8b13789179 100644
--- a/keyboards/mschwingen/modelm/led_ffc/rules.mk
+++ b/keyboards/ibm/model_m/mschwingen/led_ffc/rules.mk
diff --git a/keyboards/ibm/model_m/mschwingen/led_wired/readme.md b/keyboards/ibm/model_m/mschwingen/led_wired/readme.md
new file mode 100644
index 0000000000..073c75c10d
--- /dev/null
+++ b/keyboards/ibm/model_m/mschwingen/led_wired/readme.md
@@ -0,0 +1,21 @@
+# atmega32U4 board for IBM Model M, LEDs connected with wires
+
+![modelm](https://raw.githubusercontent.com/mschwingen/hardware/master/modelm-usb/images/PCB.jpg)
+
+This is a configuration of QMK intended to be used with the [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb).
+
+* Keyboard Maintainer: [Michael Schwingen](https://github.com/mschwingen/)
+* Hardware Supported: [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb)
+* Hardware Availability: need to build your own.
+
+Make example for this keyboard (after setting up your build environment), run one of:
+
+    make ibm/model_m/mschwingen/led_wired:default
+
+Flashing example for this keyboard:
+
+    make ibm/model_m/mschwingen/led_wired:default:flash
+
+Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/mschwingen/modelm/led_wired/rules.mk b/keyboards/ibm/model_m/mschwingen/led_wired/rules.mk
index 8b13789179..8b13789179 100644
--- a/keyboards/mschwingen/modelm/led_wired/rules.mk
+++ b/keyboards/ibm/model_m/mschwingen/led_wired/rules.mk
diff --git a/keyboards/ibm/model_m/mschwingen/led_ws2812/readme.md b/keyboards/ibm/model_m/mschwingen/led_ws2812/readme.md
new file mode 100644
index 0000000000..669f7f37a1
--- /dev/null
+++ b/keyboards/ibm/model_m/mschwingen/led_ws2812/readme.md
@@ -0,0 +1,21 @@
+# atmega32U4 board for IBM Model M, old LEDs replaces with WS2812 RGB LEDs
+
+![modelm](https://raw.githubusercontent.com/mschwingen/hardware/master/modelm-usb/images/PCB.jpg)
+
+This is a configuration of QMK intended to be used with the [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb).
+
+* Keyboard Maintainer: [Michael Schwingen](https://github.com/mschwingen/)
+* Hardware Supported: [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb)
+* Hardware Availability: need to build your own.
+
+Make example for this keyboard (after setting up your build environment), run one of:
+
+    make ibm/model_m/mschwingen/led_ws2812:default
+
+Flashing example for this keyboard:
+
+    make ibm/model_m/mschwingen/led_ws2812:default:flash
+
+Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/mschwingen/modelm/led_ws2812/rules.mk b/keyboards/ibm/model_m/mschwingen/led_ws2812/rules.mk
index 9a69649289..9a69649289 100644
--- a/keyboards/mschwingen/modelm/led_ws2812/rules.mk
+++ b/keyboards/ibm/model_m/mschwingen/led_ws2812/rules.mk
diff --git a/keyboards/mschwingen/modelm/matrix.c b/keyboards/ibm/model_m/mschwingen/matrix.c
index 7ea20b5a11..9997b65975 100644
--- a/keyboards/mschwingen/modelm/matrix.c
+++ b/keyboards/ibm/model_m/mschwingen/matrix.c
@@ -22,7 +22,7 @@
 #include "quantum.h"
 #include "spi_master.h"
 #include "print.h"
-#include "modelm.h"
+#include "mschwingen.h"
 
 #define SPI_TIMEOUT 100
 
@@ -93,7 +93,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
 
 void matrix_init_custom(void) {
     unselect_cols();
-    
+
     // set 4MHz SPI clock
     SPSR = 0;
     SPCR = _BV(SPE) | _BV(MSTR) | _BV(CPOL);
diff --git a/keyboards/mschwingen/modelm/modelm.c b/keyboards/ibm/model_m/mschwingen/mschwingen.c
index 23d1b1484a..b764660e21 100644
--- a/keyboards/mschwingen/modelm/modelm.c
+++ b/keyboards/ibm/model_m/mschwingen/mschwingen.c
@@ -15,12 +15,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <util/delay.h>
-#include "modelm.h"
+#include "mschwingen.h"
 #include "uart.h"
 #include "print.h"
 #include "sendchar.h"
 #include "ws2812.h"
-#include "modelm.h"
 #include "sleep_led.h"
 
 #ifdef UART_DEBUG
@@ -36,7 +35,7 @@ static uint16_t blink_cycle_timer;
 static bool     blink_state = false;
 static uint8_t  isRecording = 0;
 
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
 #    if RGBLED_NUM < 3
 #        error we need at least 3 RGB LEDs!
 #    endif
@@ -81,7 +80,7 @@ void sleep_led_disable(void) {
 void sleep_led_enable(void) {
     suspend_active = true;
     writePinLow(MODELM_STATUS_LED);
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
     led[0] = black;
     led[1] = black;
     led[2] = black;
@@ -90,7 +89,7 @@ void sleep_led_enable(void) {
 }
 
 void keyboard_pre_init_kb(void) {
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
     ws2812_setleds(led, RGBLED_NUM);
 #else
     /* Set status LEDs pins to output and Low (on) */
@@ -116,7 +115,7 @@ void keyboard_pre_init_kb(void) {
     writePinLow(SR_CLK_PIN);
 }
 
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
 static void led_update_rgb(void) {
     if (isRecording && blink_state) {
         led[0] = white;
diff --git a/keyboards/mschwingen/modelm/modelm.h b/keyboards/ibm/model_m/mschwingen/mschwingen.h
index d842793ccd..d842793ccd 100644
--- a/keyboards/mschwingen/modelm/modelm.h
+++ b/keyboards/ibm/model_m/mschwingen/mschwingen.h
diff --git a/keyboards/mschwingen/modelm/post_rules.mk b/keyboards/ibm/model_m/mschwingen/post_rules.mk
index a1c2040f4c..a1c2040f4c 100644
--- a/keyboards/mschwingen/modelm/post_rules.mk
+++ b/keyboards/ibm/model_m/mschwingen/post_rules.mk
diff --git a/keyboards/mschwingen/modelm/readme.md b/keyboards/ibm/model_m/mschwingen/readme.md
index f4cb360625..69c5c8b268 100644
--- a/keyboards/mschwingen/modelm/readme.md
+++ b/keyboards/ibm/model_m/mschwingen/readme.md
@@ -10,15 +10,15 @@ This is a configuration of QMK intended to be used with the [Model M USB PCB](ht
 
 Make example for this keyboard (after setting up your build environment), run one of:
 
-    make mschwingen/modelm/led_wired:default
-    make mschwingen/modelm/led_ffc:default
-    make mschwingen/modelm/led_ws2812:default
+    make ibm/model_m/mschwingen/led_wired:default
+    make ibm/model_m/mschwingen/led_ffc:default
+    make ibm/model_m/mschwingen/led_ws2812:default
 
 flash:
 
-    make mschwingen/modelm/led_wired:default:flash
-    make mschwingen/modelm/led_ffc:default:flash
-    make mschwingen/modelm/led_ws2812:default:flash
+    make ibm/model_m/mschwingen/led_wired:default:flash
+    make ibm/model_m/mschwingen/led_ffc:default:flash
+    make ibm/model_m/mschwingen/led_ws2812:default:flash
 
 Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
 
diff --git a/keyboards/mschwingen/modelm/rules.mk b/keyboards/ibm/model_m/mschwingen/rules.mk
index 94830f7a75..5ccab87d9b 100644
--- a/keyboards/mschwingen/modelm/rules.mk
+++ b/keyboards/ibm/model_m/mschwingen/rules.mk
@@ -26,4 +26,4 @@ OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS28
 
 LTO_ENABLE = yes
 
-DEFAULT_FOLDER = mschwingen/modelm/led_wired
+DEFAULT_FOLDER = ibm/model_m/mschwingen/led_wired
diff --git a/keyboards/converter/modelm101/config.h b/keyboards/ibm/model_m/teensy2/config.h
index 764fb56f64..764fb56f64 100644
--- a/keyboards/converter/modelm101/config.h
+++ b/keyboards/ibm/model_m/teensy2/config.h
diff --git a/keyboards/converter/modelm101_teensy2/info.json b/keyboards/ibm/model_m/teensy2/info.json
index 86dc44de0e..19603adb7a 100644
--- a/keyboards/converter/modelm101_teensy2/info.json
+++ b/keyboards/ibm/model_m/teensy2/info.json
@@ -1,7 +1,7 @@
 {
     "keyboard_name": "IBM Model M 101/102",
     "manufacturer": "wangfuco",
-    "url": "https://github.com/wangfuco/qmk_firmware/tree/modelm101_teensy2/keyboards/converter/modelm101_teensy2",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/teensy2",
     "maintainer": "wangfuco",
     "usb": {
         "vid": "0xFEED",
diff --git a/keyboards/converter/modelm101/keymaps/default/keymap.c b/keyboards/ibm/model_m/teensy2/keymaps/default/keymap.c
index fa8621e2e1..fa8621e2e1 100644
--- a/keyboards/converter/modelm101/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m/teensy2/keymaps/default/keymap.c
diff --git a/keyboards/converter/modelm101/keymaps/default/readme.md b/keyboards/ibm/model_m/teensy2/keymaps/default/readme.md
index fb91a8ebe5..fb91a8ebe5 100644
--- a/keyboards/converter/modelm101/keymaps/default/readme.md
+++ b/keyboards/ibm/model_m/teensy2/keymaps/default/readme.md
diff --git a/keyboards/converter/modelm101_teensy2/readme.md b/keyboards/ibm/model_m/teensy2/readme.md
index d65df72580..20f10d4791 100644
--- a/keyboards/converter/modelm101_teensy2/readme.md
+++ b/keyboards/ibm/model_m/teensy2/readme.md
@@ -2,7 +2,7 @@
 
 ![IBM Model M 101 ANSI/102 ISO](https://user-images.githubusercontent.com/46733695/161862805-c891735b-e2e8-418a-ad82-d71c00570eab.jpg)
 
-This is based on the modelm101 keyboard by iw0rm3r. The difference is that Teensy 2.0 board (produced by PJRC) is used instead of the Teensy 2.0++ due to the availability issues. Only CapsLock LED is supported since Teensy 2.0 only has 25 digital I/0 pins.
+This is based on the modelm101 teensypp keyboard by iw0rm3r. The difference is that Teensy 2.0 board (produced by PJRC) is used instead of the Teensy++ 2.0 due to the availability issues. Only CapsLock LED is supported since Teensy 2.0 only has 25 digital I/0 pins.
 
 Configuration is build for the Atmel ATmega32U4 controller, which you can easily use on the Teensy 2.0 board (produced by PJRC).
 
@@ -18,12 +18,12 @@ Status LEDs: CapsLock +5V ScrollLock NumLock
 Pins:        E6       5V  -         -  
 ```  
 
-Keyboard Maintainer: [wangfuco](https://github.com/wangfuco)  
+Keyboard Maintainer: [wangfuco](https://github.com/wangfuco)
 Hardware Supported: Teensy 2.0 board by PJRC  
 Hardware Availability: https://www.pjrc.com/store/teensy.html 
 
 Make example for this keyboard (after setting up your build environment):
 
-    make converter/modelm101_teensy2:default:teensy
+    make ibm/model_m/teensy2:default:teensy
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/converter/modelm101_teensy2/rules.mk b/keyboards/ibm/model_m/teensy2/rules.mk
index 6fe874e748..6fe874e748 100644
--- a/keyboards/converter/modelm101_teensy2/rules.mk
+++ b/keyboards/ibm/model_m/teensy2/rules.mk
diff --git a/keyboards/converter/modelm101_teensy2/config.h b/keyboards/ibm/model_m/teensypp/config.h
index 764fb56f64..764fb56f64 100644
--- a/keyboards/converter/modelm101_teensy2/config.h
+++ b/keyboards/ibm/model_m/teensypp/config.h
diff --git a/keyboards/converter/modelm101/info.json b/keyboards/ibm/model_m/teensypp/info.json
index c59df57e81..dcbed72aeb 100644
--- a/keyboards/converter/modelm101/info.json
+++ b/keyboards/ibm/model_m/teensypp/info.json
@@ -1,7 +1,7 @@
 {
     "keyboard_name": "IBM Model M 101/102",
     "manufacturer": "iw0rm3r",
-    "url": "https://github.com/iw0rm3r/qmk_firmware/tree/modelm101/keyboards/converter/modelm101",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/teensypp",
     "maintainer": "iw0rm3r",
     "usb": {
         "vid": "0xFEED",
diff --git a/keyboards/converter/modelm101_teensy2/keymaps/default/keymap.c b/keyboards/ibm/model_m/teensypp/keymaps/default/keymap.c
index fa8621e2e1..fa8621e2e1 100644
--- a/keyboards/converter/modelm101_teensy2/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m/teensypp/keymaps/default/keymap.c
diff --git a/keyboards/converter/modelm101_teensy2/keymaps/default/readme.md b/keyboards/ibm/model_m/teensypp/keymaps/default/readme.md
index fb91a8ebe5..fb91a8ebe5 100644
--- a/keyboards/converter/modelm101_teensy2/keymaps/default/readme.md
+++ b/keyboards/ibm/model_m/teensypp/keymaps/default/readme.md
diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/config.h
index 779e5a858f..779e5a858f 100644
--- a/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h
+++ b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/config.h
diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/keymap.c
index f4a1acb0ce..f4a1acb0ce 100644
--- a/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c
+++ b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/keymap.c
diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/readme.md
index 17b0f40da2..17b0f40da2 100644
--- a/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md
+++ b/keyboards/ibm/model_m/teensypp/keymaps/iw0rm3r/readme.md
diff --git a/keyboards/converter/modelm101/readme.md b/keyboards/ibm/model_m/teensypp/readme.md
index 5355c80071..e05d68b81c 100644
--- a/keyboards/converter/modelm101/readme.md
+++ b/keyboards/ibm/model_m/teensypp/readme.md
@@ -2,14 +2,14 @@
 
 ![IBM Model M 101 ANSI/102 ISO](https://i.imgur.com/DAE3W7g.jpg)
 
-This is a configuration for the QMK firmware for reversible conversion of IBM's Model M keyboards (common 101-key ANSI and 102-key ISO models) from stock, power-hungry controller, to a modern one, running the USB bus.  
-Configuration is build for the Atmel AT90USB1286 controller, which you can easily use on the Teensy 2.0++ board (produced by PJRC).  
+This is a configuration for the QMK firmware for reversible conversion of IBM's Model M keyboards (common 101-key ANSI and 102-key ISO models) from stock, power-hungry controller, to a modern one, running the USB bus.
+Configuration is build for the Atmel AT90USB1286 controller, which you can easily use on the Teensy++ 2.0 board (produced by PJRC).
 Project is heavely based on 2 other projects:
-1. Teensy 2.0++-based custom Model M controller running TMK firmware ('modelm" by [lmorchard](https://blog.lmorchard.com/2016/02/21/modelm-controller/)); - had a few issues.
-2. Teensy 2.0++-based custom Model M 122-key controller running QMK firmware ("ibm122m" by [lukexorz](https://github.com/lukexorz)); - had wrong layout for 101/102-key boards and no status LED support.
+1. Teensy++ 2.0-based custom Model M controller running TMK firmware ('modelm" by [lmorchard](https://blog.lmorchard.com/2016/02/21/modelm-controller/)); - had a few issues.
+2. Teensy++ 2.0-based custom Model M 122-key controller running QMK firmware ("ibm122m" by [lukexorz](https://github.com/lukexorz)); - had wrong layout for 101/102-key boards and no status LED support.
 
-For this conversion you will need:  
-1. Teensy 2.0++ dev board itself (can be used a different dev board, but it will require some changes in configuration);
+For this conversion you will need:
+1. Teensy++ 2.0 dev board itself (can be used a different dev board, but it will require some changes in configuration);
 2. Ribbon connectors to connect the membrane to a dev board. Depending on your Model M variation, you will need 1 Trio-mate 16pin connector (6-520315-6 or 6-520415-6) and 1 Trio-mate 8pin connector (5-120628-8 or 5-520314-8), or 2 Trio-mate 16pin connectors;
 3. Full-sized breadboard (without power rails; half-size should do, but full-sized one looks more native) or a PCB to wire everything up;
 4. A bunch of jumper wires;
@@ -27,16 +27,16 @@ Pins: F7 F6 F5 F4 F3 F2 F1 F0
 --------------------------------------------------------  
 Status LEDs: CapsLock +5V ScrollLock NumLock  
 Pins:        B6       5V  B5         B4  
-```  
+```
 
-Please note that some versions of Model M have LED connected with a ribbon cable, and not with separate wires.  
+Please note that some versions of Model M have LED connected with a ribbon cable, and not with separate wires.
 
-Keyboard Maintainer: [iw0rm3r](https://github.com/iw0rm3r)  
-Hardware Supported: Teensy 2.0++ board by PJRC  
-Hardware Availability: https://www.pjrc.com/store/teensypp.html 
+* Keyboard Maintainer: [iw0rm3r](https://github.com/iw0rm3r)
+* Hardware Supported: Teensy++ 2.0 board by PJRC
+* Hardware Availability: https://www.pjrc.com/store/teensypp.html 
 
 Make example for this keyboard (after setting up your build environment):
 
-    make converter/modelm101:default:teensy
+    make ibm/model_m/teensypp:default:teensy
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/converter/modelm101/rules.mk b/keyboards/ibm/model_m/teensypp/rules.mk
index 1eeda920b4..1eeda920b4 100644
--- a/keyboards/converter/modelm101/rules.mk
+++ b/keyboards/ibm/model_m/teensypp/rules.mk
diff --git a/keyboards/converter/modelm101/modelm101.c b/keyboards/ibm/model_m/teensypp/teensypp.c
index fa8669dc81..fa8669dc81 100644
--- a/keyboards/converter/modelm101/modelm101.c
+++ b/keyboards/ibm/model_m/teensypp/teensypp.c
diff --git a/keyboards/yugo_m/model_m_101/config.h b/keyboards/ibm/model_m/yugo_m/config.h
index 2b7fc4d157..2b7fc4d157 100644
--- a/keyboards/yugo_m/model_m_101/config.h
+++ b/keyboards/ibm/model_m/yugo_m/config.h
diff --git a/keyboards/yugo_m/model_m_101/info.json b/keyboards/ibm/model_m/yugo_m/info.json
index 9c1aeb0ac9..6e3a0b39c6 100644
--- a/keyboards/yugo_m/model_m_101/info.json
+++ b/keyboards/ibm/model_m/yugo_m/info.json
@@ -1,7 +1,7 @@
 {
-    "keyboard_name": "Yugo-M (Model M replacment controller)",
+    "keyboard_name": "Yugo-M (IBM Model M replacment controller)",
     "manufacturer": "IBM",
-    "url": "https://github.com/tomic1785/qmk_firmware/tree/stm32_model_m/keyboards/yugo_m/model_m_101",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/yugo_m",
     "maintainer": "Nidzo Tomic",
     "usb": {
         "vid": "0xFEED",
diff --git a/keyboards/yugo_m/model_m_101/keymaps/default/keymap.c b/keyboards/ibm/model_m/yugo_m/keymaps/default/keymap.c
index 2759790e4f..2759790e4f 100644
--- a/keyboards/yugo_m/model_m_101/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m/yugo_m/keymaps/default/keymap.c
diff --git a/keyboards/yugo_m/model_m_101/keymaps/default/readme.md b/keyboards/ibm/model_m/yugo_m/keymaps/default/readme.md
index 3d983cc1e7..3d983cc1e7 100644
--- a/keyboards/yugo_m/model_m_101/keymaps/default/readme.md
+++ b/keyboards/ibm/model_m/yugo_m/keymaps/default/readme.md
diff --git a/keyboards/yugo_m/model_m_101/readme.md b/keyboards/ibm/model_m/yugo_m/readme.md
index 7c14dea804..87ca8354fb 100644
--- a/keyboards/yugo_m/model_m_101/readme.md
+++ b/keyboards/ibm/model_m/yugo_m/readme.md
@@ -12,7 +12,7 @@ A drop-in replacement controller PCB for IBM Model M keyboards, based on the STM
 
 Make example for this keyboard (after setting up your build environment):
 
-    make yugo_m/model_m_101:default
+    make ibm/model_m/yugo_m:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
@@ -22,4 +22,4 @@ Note regarding 2022 matrix update:
 
 The original author's firmware did not make several lesser-used membrane/matrix positions available to the controller. These are useful for JIS users and/or if you simply want to create a more unique layout. I've added all of the unused membrane positions to the firmware, except for an extremely seldom used one that sits in the left side of the space bar on some later membranes (I would have added it if I knew its matrix position, but I haven't mapped that out yet). The default mappings for these additional keys follow JIS conventions, except for the extra key on the bottom right corner of the numpad (lower half of vertical 2u Enter), which I've mapped to the LGUI key a.k.a. left Windows/Command key for now. Remap as you wish!
 
-- an_achronism, February 2022
\ No newline at end of file
+- an_achronism, February 2022
diff --git a/keyboards/yugo_m/model_m_101/rules.mk b/keyboards/ibm/model_m/yugo_m/rules.mk
index ab2c49da70..ab2c49da70 100644
--- a/keyboards/yugo_m/model_m_101/rules.mk
+++ b/keyboards/ibm/model_m/yugo_m/rules.mk
diff --git a/keyboards/yugo_m/model_m_101/model_m_101.c b/keyboards/ibm/model_m/yugo_m/yugo_m.c
index 87e681d8e0..542043d5dc 100644
--- a/keyboards/yugo_m/model_m_101/model_m_101.c
+++ b/keyboards/ibm/model_m/yugo_m/yugo_m.c
@@ -20,7 +20,7 @@ void keyboard_pre_init_kb(void) {
   setPinOutput(A2);
   setPinOutput(A1);
   setPinOutput(A0);
-  
+
   keyboard_pre_init_user();
 }
 
diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/ibm/model_m_122/ibm122m/config.h
index af3de54eb2..af3de54eb2 100644
--- a/keyboards/handwired/ibm122m/config.h
+++ b/keyboards/ibm/model_m_122/ibm122m/config.h
diff --git a/keyboards/handwired/ibm122m/info.json b/keyboards/ibm/model_m_122/ibm122m/info.json
index 8dbdbb9fb5..54b0e9bade 100644
--- a/keyboards/handwired/ibm122m/info.json
+++ b/keyboards/ibm/model_m_122/ibm122m/info.json
@@ -1,6 +1,7 @@
 {
   "keyboard_name": "IBM Model M 122 key",
   "manufacturer": "IBM",
+  "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m_122/ibm122m",
   "maintainer": "qmk",
   "usb": {
     "vid": "0xFEED",
diff --git a/keyboards/handwired/ibm122m/keymaps/andresteare/keymap.c b/keyboards/ibm/model_m_122/ibm122m/keymaps/andresteare/keymap.c
index 6d6d09a0a5..6d6d09a0a5 100644
--- a/keyboards/handwired/ibm122m/keymaps/andresteare/keymap.c
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/andresteare/keymap.c
diff --git a/keyboards/handwired/ibm122m/keymaps/default/config.h b/keyboards/ibm/model_m_122/ibm122m/keymaps/default/config.h
index 0453a72580..0453a72580 100644
--- a/keyboards/handwired/ibm122m/keymaps/default/config.h
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/default/config.h
diff --git a/keyboards/handwired/ibm122m/keymaps/default/keymap.c b/keyboards/ibm/model_m_122/ibm122m/keymaps/default/keymap.c
index 5a0754a655..5a0754a655 100644
--- a/keyboards/handwired/ibm122m/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/default/keymap.c
diff --git a/keyboards/handwired/ibm122m/keymaps/default/readme.md b/keyboards/ibm/model_m_122/ibm122m/keymaps/default/readme.md
index aa592c9739..aa592c9739 100644
--- a/keyboards/handwired/ibm122m/keymaps/default/readme.md
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/default/readme.md
diff --git a/keyboards/handwired/ibm122m/keymaps/lukaus/config.h b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/config.h
index bf338e196d..bf338e196d 100644
--- a/keyboards/handwired/ibm122m/keymaps/lukaus/config.h
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/config.h
diff --git a/keyboards/handwired/ibm122m/keymaps/lukaus/keymap.c b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/keymap.c
index 8b99267650..8b99267650 100644
--- a/keyboards/handwired/ibm122m/keymaps/lukaus/keymap.c
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/keymap.c
diff --git a/keyboards/handwired/ibm122m/keymaps/lukaus/readme.md b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/readme.md
index 5d3f6abe15..5d3f6abe15 100644
--- a/keyboards/handwired/ibm122m/keymaps/lukaus/readme.md
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/lukaus/readme.md
diff --git a/keyboards/handwired/ibm122m/keymaps/via/keymap.c b/keyboards/ibm/model_m_122/ibm122m/keymaps/via/keymap.c
index 7f491def14..7f491def14 100644
--- a/keyboards/handwired/ibm122m/keymaps/via/keymap.c
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/via/keymap.c
diff --git a/keyboards/handwired/ibm122m/keymaps/via/rules.mk b/keyboards/ibm/model_m_122/ibm122m/keymaps/via/rules.mk
index 1e5b99807c..1e5b99807c 100644
--- a/keyboards/handwired/ibm122m/keymaps/via/rules.mk
+++ b/keyboards/ibm/model_m_122/ibm122m/keymaps/via/rules.mk
diff --git a/keyboards/ibm/model_m_122/ibm122m/readme.md b/keyboards/ibm/model_m_122/ibm122m/readme.md
new file mode 100644
index 0000000000..87b145cd5b
--- /dev/null
+++ b/keyboards/ibm/model_m_122/ibm122m/readme.md
@@ -0,0 +1,31 @@
+# ibm122m
+
+![IBM Model M 122 key](https://i.imgur.com/Oo3Ozqz.jpg)
+
+This is a keymap for the IBM Model M 122 key terminal keyboard running on a Teensy++ 2.0
+I wired it to weird pins on mine (mainly to accomodate two speakers), so make sure to update the pin arrays.
+
+* Keyboard Maintainer: [Luke Stanley](https://github.com/lukexorz)
+* Hardware Supported: Teensy++ 2.0
+* Hardware Availability: https://www.pjrc.com/store/teensypp.html
+
+Pins of the Teensy board you should use by default:
+```  
+Columns: 1  2  3  4  5  6  7  8  9  10 11 12 13 14 15 16 17 18 19 20  
+Pins:    E6 B7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 C0 C1 C2 C3 C4 C5 C7 F1  
+--------------------------------------------------------  
+Rows: 1  2  3  4  5  6  7  8  
+Pins: F0 B5 B4 B3 B2 B1 B0 E7  
+--------------------------------------------------------  
+Status LEDs: CapsLock +5V ScrollLock NumLock  
+Pins:        N/A      5V  N/A        N/A
+--------------------------------------------------------
+Speaker: 1+ 1-  2+ 2-
+Pins:    C6 GND B6 GND
+```
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ibm/model_m_122/ibm122m:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/handwired/ibm122m/rules.mk b/keyboards/ibm/model_m_122/ibm122m/rules.mk
index 3b2469ecc8..3b2469ecc8 100644
--- a/keyboards/handwired/ibm122m/rules.mk
+++ b/keyboards/ibm/model_m_122/ibm122m/rules.mk
diff --git a/keyboards/tronguylabs/m122_3270/blackpill/info.json b/keyboards/ibm/model_m_122/m122_3270/blackpill/info.json
index b17554b7e0..b17554b7e0 100644
--- a/keyboards/tronguylabs/m122_3270/blackpill/info.json
+++ b/keyboards/ibm/model_m_122/m122_3270/blackpill/info.json
diff --git a/keyboards/tronguylabs/m122_3270/blackpill/readme.md b/keyboards/ibm/model_m_122/m122_3270/blackpill/readme.md
index 1e47a447a3..1e47a447a3 100644
--- a/keyboards/tronguylabs/m122_3270/blackpill/readme.md
+++ b/keyboards/ibm/model_m_122/m122_3270/blackpill/readme.md
diff --git a/keyboards/tronguylabs/m122_3270/blackpill/rules.mk b/keyboards/ibm/model_m_122/m122_3270/blackpill/rules.mk
index 0a85fffb85..0a85fffb85 100644
--- a/keyboards/tronguylabs/m122_3270/blackpill/rules.mk
+++ b/keyboards/ibm/model_m_122/m122_3270/blackpill/rules.mk
diff --git a/keyboards/tronguylabs/m122_3270/bluepill/info.json b/keyboards/ibm/model_m_122/m122_3270/bluepill/info.json
index e2f18d06e4..e2f18d06e4 100644
--- a/keyboards/tronguylabs/m122_3270/bluepill/info.json
+++ b/keyboards/ibm/model_m_122/m122_3270/bluepill/info.json
diff --git a/keyboards/tronguylabs/m122_3270/bluepill/readme.md b/keyboards/ibm/model_m_122/m122_3270/bluepill/readme.md
index a8d92432d4..a8d92432d4 100644
--- a/keyboards/tronguylabs/m122_3270/bluepill/readme.md
+++ b/keyboards/ibm/model_m_122/m122_3270/bluepill/readme.md
diff --git a/keyboards/tronguylabs/m122_3270/bluepill/rules.mk b/keyboards/ibm/model_m_122/m122_3270/bluepill/rules.mk
index e69de29bb2..e69de29bb2 100644
--- a/keyboards/tronguylabs/m122_3270/bluepill/rules.mk
+++ b/keyboards/ibm/model_m_122/m122_3270/bluepill/rules.mk
diff --git a/keyboards/tronguylabs/m122_3270/info.json b/keyboards/ibm/model_m_122/m122_3270/info.json
index 364ab250dc..9b7a78c7f7 100644
--- a/keyboards/tronguylabs/m122_3270/info.json
+++ b/keyboards/ibm/model_m_122/m122_3270/info.json
@@ -1,6 +1,7 @@
 {
     "keyboard_name": "Model M PC/3270 122 key",
     "manufacturer": "IBM",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m_122/m122_3270",
     "maintainer": "jmaynard",
     "usb": {
         "vid": "0x1209",
diff --git a/keyboards/tronguylabs/m122_3270/keymaps/default/keymap.c b/keyboards/ibm/model_m_122/m122_3270/keymaps/default/keymap.c
index 4ade8fe6ee..4ade8fe6ee 100644
--- a/keyboards/tronguylabs/m122_3270/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m_122/m122_3270/keymaps/default/keymap.c
diff --git a/keyboards/tronguylabs/m122_3270/keymaps/default/readme.md b/keyboards/ibm/model_m_122/m122_3270/keymaps/default/readme.md
index cab833dd30..cab833dd30 100644
--- a/keyboards/tronguylabs/m122_3270/keymaps/default/readme.md
+++ b/keyboards/ibm/model_m_122/m122_3270/keymaps/default/readme.md
diff --git a/keyboards/ibm/model_m_122/m122_3270/readme.md b/keyboards/ibm/model_m_122/m122_3270/readme.md
new file mode 100644
index 0000000000..14b8684897
--- /dev/null
+++ b/keyboards/ibm/model_m_122/m122_3270/readme.md
@@ -0,0 +1,33 @@
+# m122-3270
+
+![IBM Model M 122 key](https://i.imgur.com/Oo3Ozqzh.jpg)
+
+This is a replacement controller for the IBM Model M 122 key terminal keyboard
+running on a STM32F411 BlackPill, intended to act as closely to the 3270
+keyboard's functioning as possible while still being usable on a PC.
+
+* Keyboard Maintainer: [Jay Maynard](https://github.com/jmaynard)
+* Hardware Supported: BlackPill STM32F411, Teensy++ 2.0
+* Hardware Availability: [BlackPill](https://www.adafruit.com/product/4877), [Teensy](https://www.pjrc.com/store/teensypp.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ibm/model_m_122/m122_3270/blackpill:default
+    make ibm/model_m_122/m122_3270/bluepill:default
+    make ibm/model_m_122/m122_3270/teensy:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
+and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
+for more information. Brand new to QMK? Start with our
+[Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+A schematic and Gerber files are publicly available for those wishing to have
+carrier boards made professionally instead of handwiring things. The M122
+matrix connectors plug right into it. It can be found at
+https://github.com/jmaynard/tronguylabs-m122-blackpill.
+
+This is derived from Luke Stanley's handwired/ibm122m keyboard, with my own
+keymapping and rework of the I/O for the BlackPill. There's also a version for
+the Teensy++ 2.0, since that was my original design and I still use one on one
+board, even though I switched to the BlackPill for future-proofing.
+The Teensy++ 2.0 is not recommended for new designs.
diff --git a/keyboards/tronguylabs/m122_3270/teensy/info.json b/keyboards/ibm/model_m_122/m122_3270/teensy/info.json
index 7596f5fc15..7596f5fc15 100644
--- a/keyboards/tronguylabs/m122_3270/teensy/info.json
+++ b/keyboards/ibm/model_m_122/m122_3270/teensy/info.json
diff --git a/keyboards/tronguylabs/m122_3270/teensy/readme.md b/keyboards/ibm/model_m_122/m122_3270/teensy/readme.md
index 43357ea610..43357ea610 100644
--- a/keyboards/tronguylabs/m122_3270/teensy/readme.md
+++ b/keyboards/ibm/model_m_122/m122_3270/teensy/readme.md
diff --git a/keyboards/tronguylabs/m122_3270/teensy/rules.mk b/keyboards/ibm/model_m_122/m122_3270/teensy/rules.mk
index 0a85fffb85..0a85fffb85 100644
--- a/keyboards/tronguylabs/m122_3270/teensy/rules.mk
+++ b/keyboards/ibm/model_m_122/m122_3270/teensy/rules.mk
diff --git a/keyboards/ibm/model_m_122/readme.md b/keyboards/ibm/model_m_122/readme.md
new file mode 100644
index 0000000000..0f11f3cf99
--- /dev/null
+++ b/keyboards/ibm/model_m_122/readme.md
@@ -0,0 +1,24 @@
+# IBM Model M Terminal with 122 keys
+
+This is the parent directory for all projects that replace the controller
+of IBM's Model M terminal keyboard with 122 keys and then run QMK on it.
+
+These controllers differ in their use of microcontrollers, connection (mainly
+USB) optional speakers etc.
+
+Some of them can be bought fully assembled others are do-it-yourself.
+
+## Warning - Model M Variants
+
+**Not all of these projects will fit into your keyboard!**
+
+As the Model M was produced over several years there are many variants of the
+controller PCB. Check what fits your keyboard before you build/order one.
+
+The variants built for PCs differ in:
+* PCB size
+* Connectors (8/12 pin flex, location)
+* Ground wire connector location
+
+Additionally IBM built Model M variants with 101/102 keys, the 
+space saving keyboard (SSK, 84-key) etc.
diff --git a/keyboards/ibm/model_m_ssk/readme.md b/keyboards/ibm/model_m_ssk/readme.md
new file mode 100644
index 0000000000..aa9ee490c4
--- /dev/null
+++ b/keyboards/ibm/model_m_ssk/readme.md
@@ -0,0 +1,24 @@
+# IBM Model M Space Saving Keyboard (SSK, 84-key)
+
+This is the parent directory for all projects that replace the controller
+of IBM's Model M space saving keyboard keyboard with 84 keys and then run QMK on it.
+
+These controllers differ in their use of microcontrollers, connection (mainly
+USB) optional speakers etc.
+
+Some of them can be bought fully assembled others are do-it-yourself.
+
+## Warning - Model M Variants
+
+**Not all of these projects will fit into your keyboard!**
+
+As the Model M was produced over several years there are many variants of the
+controller PCB. Check what fits your keyboard before you build/order one.
+
+The variants built for PCs differ in:
+* PCB size
+* Connectors (8/12 pin flex, location)
+* Ground wire connector location
+
+Additionally IBM built Model M variants with 101/102 keys, the 
+terminal keyboard with 122 keys etc.
diff --git a/keyboards/converter/modelm_ssk/config.h b/keyboards/ibm/model_m_ssk/teensypp_ssk/config.h
index 3b6e758833..3b6e758833 100644
--- a/keyboards/converter/modelm_ssk/config.h
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/config.h
diff --git a/keyboards/converter/modelm_ssk/info.json b/keyboards/ibm/model_m_ssk/teensypp_ssk/info.json
index ff2c6cc217..fbc3076c47 100644
--- a/keyboards/converter/modelm_ssk/info.json
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/info.json
@@ -1,7 +1,7 @@
 {
     "keyboard_name": "IBM Model M Space-Saving Keyboard",
     "manufacturer": "tiltowait",
-    "url": "https://github.com/tiltowait/qmk_firmware/tree/modelm_ssk/keyboards/converter/modelm_ssk",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m_ssk/teensypp_ssk",
     "maintainer": "tiltowait",
     "usb": {
         "vid": "0xFEED",
diff --git a/keyboards/converter/modelm_ssk/keymaps/default/keymap.c b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/default/keymap.c
index 928d745f0d..928d745f0d 100644
--- a/keyboards/converter/modelm_ssk/keymaps/default/keymap.c
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/default/keymap.c
diff --git a/keyboards/converter/modelm_ssk/keymaps/default/readme.md b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/default/readme.md
index bc829be266..bc829be266 100644
--- a/keyboards/converter/modelm_ssk/keymaps/default/readme.md
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/default/readme.md
diff --git a/keyboards/converter/modelm_ssk/keymaps/tiltowait/config.h b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/tiltowait/config.h
index 151118fdf6..151118fdf6 100644
--- a/keyboards/converter/modelm_ssk/keymaps/tiltowait/config.h
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/tiltowait/config.h
diff --git a/keyboards/converter/modelm_ssk/keymaps/tiltowait/keymap.c b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/tiltowait/keymap.c
index 4836ad329e..4836ad329e 100644
--- a/keyboards/converter/modelm_ssk/keymaps/tiltowait/keymap.c
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/tiltowait/keymap.c
diff --git a/keyboards/converter/modelm_ssk/keymaps/tiltowait/readme.md b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/tiltowait/readme.md
index aecdd89b82..aecdd89b82 100644
--- a/keyboards/converter/modelm_ssk/keymaps/tiltowait/readme.md
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/keymaps/tiltowait/readme.md
diff --git a/keyboards/converter/modelm_ssk/readme.md b/keyboards/ibm/model_m_ssk/teensypp_ssk/readme.md
index 8105a0c2df..14c0e93dbd 100644
--- a/keyboards/converter/modelm_ssk/readme.md
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/readme.md
@@ -2,11 +2,11 @@
 
 ![IBM Model M Space-Saving Keyboard](https://i.imgur.com/CSXrQI5.jpg)
 
-This is a QMK firmware configuration for the IBM Model M Space-Saving Keyboard (SSK). Based on [this project](https://github.com/qmk/qmk_firmware/tree/master/keyboards/converter/modelm101), it features a few slight improvements and, most importantly, a full remapping to match the SSK's matrix, which differs from its full-sized cousins. The modification is easily reversible, as no part of the keyboard is permanently changed. Just take out the replacement controller and reinstall the original, should you desire.
+This is a QMK firmware configuration for the IBM Model M Space-Saving Keyboard (SSK). Based on [this project](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/teensypp), it features a few slight improvements and, most importantly, a full remapping to match the SSK's matrix, which differs from its full-sized cousins. The modification is easily reversible, as no part of the keyboard is permanently changed. Just take out the replacement controller and reinstall the original, should you desire.
 
 The numpad layer (accessed with Shift + Scroll Lock as with the original controller) is mapped to layer 7 by default. All non-numpad keys are transparent.
 
-**Note:** As of this writing, this configuration has only been tested on the 1392464 SSK. It's possible other models differ in their internal matrices. Should the provided matrix not work for you (and you are certain of your connections), you can enable debugging with `CONSOLE_ENABLE = yes` in `rules.mk` and by following the directions in `default/keymap.c`. Once done, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) will display row/col information to help you remap `modelm_ssk.h`.
+**Note:** As of this writing, this configuration has only been tested on the 1392464 SSK. It's possible other models differ in their internal matrices. Should the provided matrix not work for you (and you are certain of your connections), you can enable debugging with `CONSOLE_ENABLE = yes` in `rules.mk` and by following the directions in `default/keymap.c`. Once done, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) will display row/col information to help you remap `keymap.c`.
 
 ## Requirements
 
@@ -48,7 +48,7 @@ This configuration will not work out of the box with the [Unicomp Mini M](https:
 
 Make example for this keyboard (after setting up your build environment):
 
-    make converter/modelm_ssk:default
+    make ibm/model_m_ssk/teensypp_ssk:default
 
 You must press the button on the Teensy to enter the bootloader the first time. Afterward, so long as you keep `COMMAND_ENABLE = yes` in `rules.mk` (enabled by default), you can use `Left Shift + Right Shift + B` to enter the bootloader. With this method, you can omit `:teensy` from the end of the `make` command.
 
diff --git a/keyboards/converter/modelm_ssk/rules.mk b/keyboards/ibm/model_m_ssk/teensypp_ssk/rules.mk
index 2904475d7d..2904475d7d 100644
--- a/keyboards/converter/modelm_ssk/rules.mk
+++ b/keyboards/ibm/model_m_ssk/teensypp_ssk/rules.mk
diff --git a/keyboards/tronguylabs/m122_3270/readme.md b/keyboards/tronguylabs/m122_3270/readme.md
deleted file mode 100644
index 1dd1580bcd..0000000000
--- a/keyboards/tronguylabs/m122_3270/readme.md
+++ /dev/null
@@ -1,22 +0,0 @@
-# m122-3270
-
-![IBM Model M 122 key](https://i.imgur.com/Oo3Ozqzh.jpg)
-
-This is a replacement controller for the IBM Model M 122 key terminal keyboard running on a STM32F411 BlackPill, intended to act as closely to the 3270 keyboard's functioning as possible while still being usable on a PC.
-
-* Keyboard Maintainer: [Jay Maynard](https://github.com/jmaynard)
-* Hardware Supported: BlackPill STM32F411, Teensy++ 2.0
-* Hardware Availability: [BlackPill](https://www.adafruit.com/product/4877), [Teensy](https://www.pjrc.com/store/teensypp.html)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make tronguylabs/m122_3270/blackpill:default
-    make tronguylabs/m122_3270/teensy:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-A schematic and Gerber files are publicly available for those wishing to have carrier boards made
-professionally instead of handwiring things. The M122 matrix connectors plug right into it. It can
-be found at https://github.com/jmaynard/tronguylabs-m122-blackpill.
-
-This is derived from Luke Stanley's handwired/ibm122m keyboard, with my own keymapping and rework of the I/O for the BlackPill. There's also a version for the Teensy++ 2.0, since that was my original design and I still use one on one board, even though I switched to the BlackPill for future-proofing. The Teensy++ 2.0 is not recommended for new designs.
diff --git a/keyboards/yugo_m/readme.md b/keyboards/yugo_m/readme.md
deleted file mode 100644
index 40c7b64073..0000000000
--- a/keyboards/yugo_m/readme.md
+++ /dev/null
@@ -1,19 +0,0 @@
-# Yugo-M - An STM32-based IBM Model M controller
-
-A drop-in replacement controller PCB for IBM Model M keyboards. 
-Currently available only for 101/102 key keyboards. 
-
-* Keyboard Maintainer: [Nidzo Tomic](https://github.com/tomic1785)
-* Hardware Supported: Yugo-M PCB
-  * Rev 0.9b
-  * Rev 1.1b
-
-For more info visit the project repository: [Yugo-M-controller-project](https://github.com/tomic1785/Yugo-M-controller-project)
-
-
-
-Note regarding 2022 matrix update:
-
-The original author's firmware did not make several lesser-used membrane/matrix positions available to the controller. These are useful for JIS users and/or if you simply want to create a more unique layout. I've added all of the unused membrane positions to the firmware, except for an extremely seldom used one that sits in the left side of the space bar on some later membranes (I would have added it if I knew its matrix position, but I haven't mapped that out yet). The default mappings for these additional keys follow JIS conventions, except for the extra key on the bottom right corner of the numpad (lower half of vertical 2u Enter), which I've mapped to the LGUI key a.k.a. left Windows/Command key for now. Remap as you wish!
-
-- an_achronism, February 2022
\ No newline at end of file