adding uf2 flash support for blackpill 401 (#13968)

* adding uf2 flash support for blackpill 401

* forgot to add blackpill to keyboard header file

* making changes requested by drashna

* fixing tzarc s comments

* removing the keyboard

* undo the change to dactyl_manuform.h

4 files changed, 183 insertions, 2 deletions

diff --git a/docs/flashing.md b/docs/flashing.md
index fae9c5d1c4..7b7fe956f3 100644
--- a/docs/flashing.md
+++ b/docs/flashing.md
@@ -298,7 +298,7 @@ Flashing sequence:
 
 ## tinyuf2
 
-Keyboards may opt into supporting the tinyuf2 bootloader. This is currently only supported on the F411 blackpill.
+Keyboards may opt into supporting the tinyuf2 bootloader. This is currently only supported on the F401/F411 blackpill.
 
 The `rules.mk` setting for this bootloader is `tinyuf2`, and can be specified at the keymap or user level.
 
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld b/platforms/chibios/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld
new file mode 100644
index 0000000000..f4e487dc8f
--- /dev/null
+++ b/platforms/chibios/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld
@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32F401xC memory setup.
+ */
+MEMORY
+{
+    flash0 (rx) : org = 0x08000000 + 64k, len = 256k - 64k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
+    flash1 (rx) : org = 0x00000000, len = 0
+    flash2 (rx) : org = 0x00000000, len = 0
+    flash3 (rx) : org = 0x00000000, len = 0
+    flash4 (rx) : org = 0x00000000, len = 0
+    flash5 (rx) : org = 0x00000000, len = 0
+    flash6 (rx) : org = 0x00000000, len = 0
+    flash7 (rx) : org = 0x00000000, len = 0
+    ram0   (wx) : org = 0x20000000, len = 64k
+    ram1   (wx) : org = 0x00000000, len = 0
+    ram2   (wx) : org = 0x00000000, len = 0
+    ram3   (wx) : org = 0x00000000, len = 0
+    ram4   (wx) : org = 0x00000000, len = 0
+    ram5   (wx) : org = 0x00000000, len = 0
+    ram6   (wx) : org = 0x00000000, len = 0
+    ram7   (wx) : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
+
+/* TinyUF2 bootloader reset support */
+_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld b/platforms/chibios/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld
new file mode 100644
index 0000000000..895d13fa32
--- /dev/null
+++ b/platforms/chibios/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld
@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32F401xE memory setup.
+ */
+MEMORY
+{
+    flash0 (rx) : org = 0x08000000 + 64k, len = 512k - 64k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
+    flash1 (rx) : org = 0x00000000, len = 0
+    flash2 (rx) : org = 0x00000000, len = 0
+    flash3 (rx) : org = 0x00000000, len = 0
+    flash4 (rx) : org = 0x00000000, len = 0
+    flash5 (rx) : org = 0x00000000, len = 0
+    flash6 (rx) : org = 0x00000000, len = 0
+    flash7 (rx) : org = 0x00000000, len = 0
+    ram0   (wx) : org = 0x20000000, len = 96k
+    ram1   (wx) : org = 0x00000000, len = 0
+    ram2   (wx) : org = 0x00000000, len = 0
+    ram3   (wx) : org = 0x00000000, len = 0
+    ram4   (wx) : org = 0x00000000, len = 0
+    ram5   (wx) : org = 0x00000000, len = 0
+    ram6   (wx) : org = 0x00000000, len = 0
+    ram7   (wx) : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
+
+/* TinyUF2 bootloader reset support */
+_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk
index dc441d27bc..f7eaeec8ac 100644
--- a/quantum/mcu_selection.mk
+++ b/quantum/mcu_selection.mk
@@ -252,7 +252,12 @@ ifneq ($(findstring STM32F401, $(MCU)),)
   # Linker script to use
   # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
   #   or <keyboard_dir>/ld/
-  MCU_LDSCRIPT ?= STM32F401xC
+  ifeq ($(strip $(BOOTLOADER)), tinyuf2)
+    MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
+    FIRMWARE_FORMAT ?= uf2
+  else
+    MCU_LDSCRIPT ?= STM32F401xC
+  endif
 
   # Startup code to use
   #  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/