Add alps64

8 files changed, 691 insertions, 0 deletions

diff --git a/keyboard/alps64/Makefile b/keyboard/alps64/Makefile
new file mode 100644
index 0000000000..a7d59309e8
--- /dev/null
+++ b/keyboard/alps64/Makefile
@@ -0,0 +1,134 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = alps64
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/alps64/config.h b/keyboard/alps64/config.h
new file mode 100644
index 0000000000..06649a092d
--- /dev/null
+++ b/keyboard/alps64/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         Alps64
+#define DESCRIPTION     t.m.k. keyboard firmware for Alps64
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/alps64/keymap_common.c b/keyboard/alps64/keymap_common.c
new file mode 100644
index 0000000000..fdb1769e1c
--- /dev/null
+++ b/keyboard/alps64/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/keyboard/alps64/keymap_common.h b/keyboard/alps64/keymap_common.h
new file mode 100644
index 0000000000..b2d6ad5c4a
--- /dev/null
+++ b/keyboard/alps64/keymap_common.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+/* Alps64 keymap definition macro */
+#define KEYMAP( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
+    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
+    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \
+}
+
+/* AEK US */
+#define KEYMAP_AEK( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, \
+    K30, K40, K50,           K60,                          K00, K10, K20  \
+) KEYMAP( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, NO,  K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, NO,  K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, NO,  \
+    K30, K40, K50,           K60,                     NO,  K00, K10, K20  \
+)
+
+#endif
diff --git a/keyboard/alps64/keymap_hasu.c b/keyboard/alps64/keymap_hasu.c
new file mode 100644
index 0000000000..784b313134
--- /dev/null
+++ b/keyboard/alps64/keymap_hasu.c
@@ -0,0 +1,151 @@
+#include "keymap_common.h"
+
+/*
+ * Hasu
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|FN1     |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     */
+    [0] = KEYMAP_AEK( \
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,FN1, \
+        LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2, RSFT, \
+        LCTL,LGUI,LALT,          FN4,                          RALT,FN5, RCTL),
+
+    /* HHKB mode[HHKB Fn]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Del    |
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     */ 
+    [1] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL, \
+        CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,  BSPC, \
+        LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS, \
+        LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,RSFT, \
+        LCTL,LGUI,LALT,          TRNS,                         RALT,RGUI,RCTL),
+
+    /* Vi mode[Slash]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Del    |
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd|   |   |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgUlEnd|Fn0|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     */
+    [2] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL, \
+        TAB, HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,  BSPC, \
+        LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,  ENT, \
+        LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2, RSFT, \
+        LCTL,LGUI,LALT,          SPC,                          RALT,RGUI,RCTL),
+
+    /* Mouse mode(IJKL)[Semicolon]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+     * |-----------------------------------------------------------|
+     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Fn |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    [3] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL, \
+        FN8, NO,  NO,  NO,  NO,  NO,  NO,  WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+        LCTL,ACL0,ACL1,ACL2,ACL2,NO,  NO,  MS_L,MS_D,MS_R,TRNS,NO,  ENT, \
+        LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,FN9, FN10,NO,  RSFT, \
+        LCTL,LGUI,LALT,          BTN1,                         TRNS,TRNS,TRNS),
+
+    /* Layer 4: Mouse mode(IJKL)[Space]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+     * |-----------------------------------------------------------|
+     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Mb1|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    [4] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL, \
+        FN8, NO,  NO,  NO,  NO,  NO,  NO,  WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+        LCTL,VOLD,VOLU,MUTE,NO,  NO,  NO,  MS_L,MS_D,MS_R,BTN1,NO,  ENT, \
+        LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,FN9, FN10,NO,  RSFT, \
+        LCTL,LGUI,LALT,          TRNS,                         TRNS,TRNS,TRNS),
+};
+
+
+/* id for user defined function/macro */
+enum function_id {
+    NONE,
+};
+
+enum macro_id {
+    ALT_TAB,
+};
+
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_DEFAULT_LAYER_SET(0),                // Default layer(not used)
+    [1] = ACTION_LAYER_TAP_KEY(1, KC_ENTER),          // HHKB layer
+    [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH),          // Cursor layer with Slash*
+    [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN),           // Mousekey layer with Semicolon*
+    [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC),            // Mousekey layer with Space
+    [5] = ACTION_LAYER_MOMENTARY(3),                  // Mousekey layer(IJKL)
+    [6] = ACTION_LAYER_TAP_KEY(MOD_RCTL, KC_ENT),      // RControl with tap Enter
+    [7] = ACTION_MODS_ONESHOT(MOD_LSFT),              // Oneshot Shift
+    [8] = ACTION_MACRO(ALT_TAB),                      // Application switching
+    [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
+   [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
+};
+
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    switch (id) {
+        case ALT_TAB:
+            return (record->event.pressed ?
+                    MACRO( D(LALT), D(TAB), END ) :
+                    MACRO( U(TAB), END ));
+    }
+    return MACRO_NONE;
+}
diff --git a/keyboard/alps64/keymap_plain.c b/keyboard/alps64/keymap_plain.c
new file mode 100644
index 0000000000..13a4407f8f
--- /dev/null
+++ b/keyboard/alps64/keymap_plain.c
@@ -0,0 +1,12 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty */
+    KEYMAP_AEK( \
+        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+        CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \
+        LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RSFT, \
+        LCTL,LGUI,LALT,          SPC,                          RALT,RGUI,RCTL),
+};
+const uint16_t PROGMEM fn_actions[] = {};
diff --git a/keyboard/alps64/led.c b/keyboard/alps64/led.c
new file mode 100644
index 0000000000..d20c51aabe
--- /dev/null
+++ b/keyboard/alps64/led.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output high
+        DDRC |= (1<<5);
+        PORTC |= (1<<5);
+    } else {
+        // Hi-Z
+        DDRC &= ~(1<<5);
+        PORTC &= ~(1<<5);
+    }
+}
diff --git a/keyboard/alps64/matrix.c b/keyboard/alps64/matrix.c
new file mode 100644
index 0000000000..a49755c3a3
--- /dev/null
+++ b/keyboard/alps64/matrix.c
@@ -0,0 +1,190 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+/* Column pin configuration
+ * col: 0   1   2   3   4   5   6   7
+ * pin: B0  B1  B2  B3  B4  B5  B6  B7
+ */
+static void  init_cols(void)
+{
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRB  &= ~0b11111111;
+    PORTB |=  0b11111111;
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void)
+{
+    // Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1)
+    return ~PINB;
+}
+
+/* Row pin configuration
+ * row: 0   1   2   3   4   5   6   7
+ * pin: D0  D1  D2  D3  D4  D5  D6  C2
+ */
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRD  &= ~0b01111111;
+    PORTD &= ~0b01111111;
+    DDRC  &= ~0b00000100;
+    PORTD &= ~0b00000100;
+}
+
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 1:
+            DDRD  |= (1<<1);
+            PORTD &= ~(1<<1);
+            break;
+        case 2:
+            DDRD  |= (1<<2);
+            PORTD &= ~(1<<2);
+            break;
+        case 3:
+            DDRD  |= (1<<3);
+            PORTD &= ~(1<<3);
+            break;
+        case 4:
+            DDRD  |= (1<<4);
+            PORTD &= ~(1<<4);
+            break;
+        case 5:
+            DDRD  |= (1<<5);
+            PORTD &= ~(1<<5);
+            break;
+        case 6:
+            DDRD  |= (1<<6);
+            PORTD &= ~(1<<6);
+            break;
+        case 7:
+            DDRC  |= (1<<2);
+            PORTC &= ~(1<<2);
+            break;
+    }
+}