Initial whitefox support

13 files changed, 1463 insertions, 0 deletions

diff --git a/keyboards/whitefox/Makefile b/keyboards/whitefox/Makefile
new file mode 100644
index 0000000000..4e2a6f00fd
--- /dev/null
+++ b/keyboards/whitefox/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/whitefox/bootloader_defs.h b/keyboards/whitefox/bootloader_defs.h
new file mode 100644
index 0000000000..c67153be60
--- /dev/null
+++ b/keyboards/whitefox/bootloader_defs.h
@@ -0,0 +1 @@
+#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/whitefox/chconf.h b/keyboards/whitefox/chconf.h
new file mode 100644
index 0000000000..43c845739a
--- /dev/null
+++ b/keyboards/whitefox/chconf.h
@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h
new file mode 100644
index 0000000000..b7116341ff
--- /dev/null
+++ b/keyboards/whitefox/config.h
@@ -0,0 +1,78 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0F0F
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "Input Club"
+#define USBSTR_MANUFACTURER    'I', '\x00', 'n', '\x00', 'p', '\x00', 'u', '\x00', 't', '\x00', ' ', '\x00', 'C', '\x00', 'l', '\x00', 'u', '\x00', 'b', '\x00'
+#define PRODUCT "WhiteFox/QMK"
+#define USBSTR_PRODUCT         'W', '\x00', 'h', '\x00', 'i', '\x00', 't', '\x00', 'e', '\x00', 'F', '\x00', 'o', '\x00', 'x', '\x00', ' ', '\x00'
+
+/* key matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Keymap for Infinity prototype */
+//#define INFINITY_PROTOTYPE
+
+/* Keymap for Infinity 1.1a (first revision with LED support) */
+//#define INFINITY_LED
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/whitefox/halconf.h b/keyboards/whitefox/halconf.h
new file mode 100644
index 0000000000..46b37a4f46
--- /dev/null
+++ b/keyboards/whitefox/halconf.h
@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/whitefox/keymaps/default/keymap.c b/keyboards/whitefox/keymaps/default/keymap.c
new file mode 100644
index 0000000000..426b226a04
--- /dev/null
+++ b/keyboards/whitefox/keymaps/default/keymap.c
@@ -0,0 +1,51 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "whitefox.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,---------------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|Ins|
+     * |---------------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs|Del|
+     * |---------------------------------------------------------------|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |PgU|
+     * |---------------------------------------------------------------|
+     * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PgD|
+     * |---------------------------------------------------------------|
+     * |Ctrl|Gui |Alt |         Space    |Fn0 |Alt |Gui |  |Lef|Dow|Rig|
+     * `---------------------------------------------------------------'
+     */
+    [0] = KEYMAP( \
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV, INS, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSPC,     DEL, \
+        CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,ENT,      PGUP,\
+        LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RSFT,     UP,  PGDN,\
+        LCTL,LGUI,LALT,               SPC,           RALT,FN0, RCTL,     LEFT,DOWN,RGHT \
+    ),
+    [1] = KEYMAP( \
+        TRNS,F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,TRNS,MUTE,\
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,TRNS,     TRNS,\
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     VOLU,\
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     PGUP,VOLD,\
+        TRNS,TRNS,TRNS,               TRNS,          TRNS,TRNS,TRNS,     HOME,PGDN,END  \
+    ),
+};
+
+const uint16_t fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+};
diff --git a/keyboards/whitefox/keymaps/matt3o/keymap.c b/keyboards/whitefox/keymaps/matt3o/keymap.c
new file mode 100644
index 0000000000..ecadcd2845
--- /dev/null
+++ b/keyboards/whitefox/keymaps/matt3o/keymap.c
@@ -0,0 +1,92 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "whitefox.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,---------------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|Ins|
+     * |---------------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs|Del|
+     * |---------------------------------------------------------------|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |PgU|
+     * |---------------------------------------------------------------|
+     * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PgD|
+     * |---------------------------------------------------------------|
+     * |Ctrl|Gui |Alt |         Space    |Fn0 |Alt |Gui |  |Lef|Dow|Rig|
+     * `---------------------------------------------------------------'
+     */
+    [0] = KEYMAP( \
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV, MUTE,\
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSPC,     DEL, \
+        FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,ENT,      PGUP,\
+        LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RSFT,     UP,  PGDN,\
+        LCTL,LGUI,LALT,               SPC,           RALT,FN1, RCTL,     LEFT,DOWN,RGHT \
+    ),
+    [1] = KEYMAP( \
+        TRNS,F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,TRNS,TRNS,\
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,DEL ,     INS ,\
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     VOLU,\
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     PGUP,VOLD,\
+        TRNS,TRNS,TRNS,               TRNS,          TRNS,TRNS,TRNS,     HOME,PGDN,END  \
+    ),
+    [2] = KEYMAP( \
+        SLEP,P1,  P2,  P3,  P4,  P5,  P6,  P7,  P8,  P9,  P0,  TRNS,TRNS,TRNS,TRNS,FN2, \
+        TRNS,TRNS,FN5 ,FN6 ,TRNS,FN7 ,TRNS,TRNS,TRNS,TRNS,PSCR,TRNS,TRNS,TRNS,     FN3, \
+        CAPS,TRNS,TRNS,TRNS,FN4 ,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,\
+        TRNS,TRNS,TRNS,TRNS,CALC,TRNS,TRNS,TRNS,MAIL,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,\
+        TRNS,TRNS,TRNS,               TRNS,          TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS \
+    ),
+};
+
+/* Give numbers some descriptive names */
+#define ACTION_LEDS_ALL 1
+#define ACTION_LEDS_GAME 2
+
+const uint16_t fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+    [1] = ACTION_LAYER_MOMENTARY(2),
+    [2] = ACTION_FUNCTION(ACTION_LEDS_ALL),
+    [3] = ACTION_FUNCTION(ACTION_LEDS_GAME),
+
+    [4] = ACTION_USAGE_CONSUMER(0x1B4),
+    [5] = ACTION_USAGE_CONSUMER(0x196),
+    [6] = ACTION_USAGE_CONSUMER(0x1A6),
+    [7] = ACTION_USAGE_CONSUMER(0x1A0),
+
+};
+
+/* custom action function */
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	/*
+  (void)opt;
+  switch(id) {
+    case ACTION_LEDS_ALL:
+        if(record->event.pressed) {
+          // signal the LED controller thread
+          chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE);
+        }
+      break;
+    case ACTION_LEDS_GAME:
+      if(record->event.pressed) {
+        // signal the LED controller thread
+        chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE);
+      }
+      break;
+  }
+  */
+}
diff --git a/keyboards/whitefox/led.c b/keyboards/whitefox/led.c
new file mode 100644
index 0000000000..aed66c7c03
--- /dev/null
+++ b/keyboards/whitefox/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+}
diff --git a/keyboards/whitefox/matrix.c b/keyboards/whitefox/matrix.c
new file mode 100644
index 0000000000..ce35bca287
--- /dev/null
+++ b/keyboards/whitefox/matrix.c
@@ -0,0 +1,132 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "print.h"
+#include "matrix.h"
+
+
+/*
+ * Matt3o's WhiteFox
+ * Column pins are input with internal pull-down. Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *
+ *     col: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 }
+ *     row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC8, PTC9, PTC10, PTC11 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+
+void matrix_init(void)
+{
+//debug_matrix = true;
+    /* Column(sense) */
+    palSetPadMode(GPIOD, 0,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 1,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 4,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 5,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 6,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 7,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 1,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 2,  PAL_MODE_INPUT_PULLDOWN);
+
+    /* Row(strobe) */
+    palSetPadMode(GPIOB, 2,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 3,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 8,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 9,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL);
+
+    memset(matrix, 0, MATRIX_ROWS);
+    memset(matrix_debouncing, 0, MATRIX_ROWS);
+}
+
+uint8_t matrix_scan(void)
+{
+    for (int row = 0; row < MATRIX_ROWS; row++) {
+        matrix_row_t data = 0;
+
+        // strobe row
+        switch (row) {
+            case 0: palSetPad(GPIOB, 2);    break;
+            case 1: palSetPad(GPIOB, 3);    break;
+            case 2: palSetPad(GPIOB, 18);   break;
+            case 3: palSetPad(GPIOB, 19);   break;
+            case 4: palSetPad(GPIOC, 0);    break;
+            case 5: palSetPad(GPIOC, 8);    break;
+            case 6: palSetPad(GPIOC, 9);    break;
+            case 7: palSetPad(GPIOC, 10);   break;
+            case 8: palSetPad(GPIOC, 11);   break;
+        }
+
+        wait_us(1); // need wait to settle pin state
+
+        // read col data: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 }
+        data = ((palReadPort(GPIOC) & 0x06UL) << 5) |
+               ((palReadPort(GPIOD) & 0xF0UL) >> 2) |
+                (palReadPort(GPIOD) & 0x03UL);
+
+        // un-strobe row
+        switch (row) {
+            case 0: palClearPad(GPIOB, 2);  break;
+            case 1: palClearPad(GPIOB, 3);  break;
+            case 2: palClearPad(GPIOB, 18); break;
+            case 3: palClearPad(GPIOB, 19); break;
+            case 4: palClearPad(GPIOC, 0);  break;
+            case 5: palClearPad(GPIOC, 8);  break;
+            case 6: palClearPad(GPIOC, 9);  break;
+            case 7: palClearPad(GPIOC, 10); break;
+            case 8: palClearPad(GPIOC, 11); break;
+        }
+
+        if (matrix_debouncing[row] != data) {
+            matrix_debouncing[row] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            matrix[row] = matrix_debouncing[row];
+        }
+        debouncing = false;
+    }
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    xprintf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        xprintf("%X0: ", row);
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                xprintf("1");
+            else
+                xprintf("0");
+        }
+        xprintf("\n");
+    }
+}
diff --git a/keyboards/whitefox/mcuconf.h b/keyboards/whitefox/mcuconf.h
new file mode 100644
index 0000000000..ab1f7d724d
--- /dev/null
+++ b/keyboards/whitefox/mcuconf.h
@@ -0,0 +1,66 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* PEE mode - 48MHz system clock driven by external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#define KINETIS_XTAL_FREQUENCY      16000000UL
+
+#if 0
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1
+#define KINETIS_CLKDIV1_OUTDIV2     1
+#define KINETIS_CLKDIV1_OUTDIV4     2
+#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                TRUE
+#define KINETIS_USB_USB0_IRQ_PRIORITY       5
+
+/*
+ * I2C driver settings
+ */
+#define KINETIS_I2C_USE_I2C0                TRUE
+#define KINETIS_I2C_I2C0_PRIORITY           4
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
new file mode 100644
index 0000000000..18b690f492
--- /dev/null
+++ b/keyboards/whitefox/rules.mk
@@ -0,0 +1,68 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
+#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity KB
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
+OPT_DEFS = 
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+#CONSOLE_ENABLE ?= yes	# Console for debug
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	    # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
diff --git a/keyboards/whitefox/whitefox.c b/keyboards/whitefox/whitefox.c
new file mode 100644
index 0000000000..d35bf83388
--- /dev/null
+++ b/keyboards/whitefox/whitefox.c
@@ -0,0 +1,17 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "whitefox.h"
diff --git a/keyboards/whitefox/whitefox.h b/keyboards/whitefox/whitefox.h
new file mode 100644
index 0000000000..0ffcdca011
--- /dev/null
+++ b/keyboards/whitefox/whitefox.h
@@ -0,0 +1,54 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef WHITEFOX_H
+#define WHITEFOX_H
+
+#include "quantum.h"
+
+/* WhiteFox 
+ * ,---------------------------------------------------------------.
+ * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|Ins|
+ * |---------------------------------------------------------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs|Del|
+ * |---------------------------------------------------------------|
+ * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |PgU|
+ * |---------------------------------------------------------------|
+ * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PgD|
+ * |---------------------------------------------------------------|
+ * |Ctrl|Gui |Alt |         Space    |App |Alt |Gui |  |Lef|Dow|Rig|
+ * `---------------------------------------------------------------'
+ */
+
+#define KEYMAP( \
+    K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, K61, \
+    K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, K23,      K33, \
+    K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, K64, K74, K84,      K05, \
+    K15, K25, K35, K45, K55, K65, K75, K85, K06, K16, K26, K36, K46,      K56, K66, \
+    K76, K86, K07,                K17,           K27, K37, K47,      K57, K67, K77  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
+    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
+    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
+    { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO    }  \
+}
+
+#endif