summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRyan <fauxpark@gmail.com>2023-05-01 17:37:12 +1000
committerGitHub <noreply@github.com>2023-05-01 17:37:12 +1000
commit2944e938703e2049bb6262a0ab31e701d27e8ab3 (patch)
treea73caa75fafe8b7926e18886d603c032d246fcac
parent12d42cedd2624db0d5cfe6f538211f9dfcd19822 (diff)
Move `USB_MAX_POWER_CONSUMPTION` to data driven (#20648)
-rw-r--r--keyboards/barleycorn_smd/config.h3
-rw-r--r--keyboards/barleycorn_smd/info.json3
-rw-r--r--keyboards/basketweave/config.h2
-rw-r--r--keyboards/basketweave/info.json3
-rw-r--r--keyboards/chavdai40/rev1/config.h3
-rw-r--r--keyboards/chavdai40/rev1/info.json3
-rw-r--r--keyboards/chavdai40/rev2/config.h3
-rw-r--r--keyboards/chavdai40/rev2/info.json3
-rw-r--r--keyboards/coseyfannitutti/discipad/config.h2
-rw-r--r--keyboards/coseyfannitutti/discipad/info.json3
-rw-r--r--keyboards/coseyfannitutti/discipline/config.h2
-rw-r--r--keyboards/coseyfannitutti/discipline/info.json3
-rw-r--r--keyboards/crimsonkeyboards/resume1800/config.h2
-rw-r--r--keyboards/crimsonkeyboards/resume1800/info.json3
-rw-r--r--keyboards/dm9records/plaid/config.h2
-rw-r--r--keyboards/dm9records/plaid/info.json3
-rw-r--r--keyboards/ericrlau/numdiscipline/rev1/config.h2
-rw-r--r--keyboards/ericrlau/numdiscipline/rev1/info.json3
-rw-r--r--keyboards/gboards/ergotaco/config.h2
-rw-r--r--keyboards/gboards/georgi/config.h2
-rw-r--r--keyboards/gboards/gergo/config.h2
-rw-r--r--keyboards/handwired/dactyl/config.h2
-rw-r--r--keyboards/handwired/dc/mc/001/config.h2
-rw-r--r--keyboards/handwired/dc/mc/001/info.json3
-rw-r--r--keyboards/handwired/frenchdev/config.h2
-rw-r--r--keyboards/handwired/hnah40/config.h2
-rw-r--r--keyboards/handwired/hnah40/info.json3
-rw-r--r--keyboards/handwired/lovelive9/config.h1
-rw-r--r--keyboards/handwired/lovelive9/info.json3
-rw-r--r--keyboards/hotdox/config.h2
-rw-r--r--keyboards/jkdlab/binary_monkey/config.h21
-rw-r--r--keyboards/jkdlab/binary_monkey/info.json3
-rw-r--r--keyboards/kagizaraya/chidori/config.h1
-rw-r--r--keyboards/kagizaraya/chidori/info.json3
-rw-r--r--keyboards/keycapsss/plaid_pad/config.h2
-rw-r--r--keyboards/keycapsss/plaid_pad/info.json3
-rw-r--r--keyboards/kinesis/kint2pp/config.h5
-rw-r--r--keyboards/kinesis/kint2pp/info.json3
-rw-r--r--keyboards/kinesis/kint36/config.h4
-rw-r--r--keyboards/kinesis/kint36/info.json3
-rw-r--r--keyboards/kinesis/kint41/config.h4
-rw-r--r--keyboards/kinesis/kint41/info.json3
-rw-r--r--keyboards/kinesis/kintlc/config.h5
-rw-r--r--keyboards/kinesis/kintlc/info.json3
-rw-r--r--keyboards/kprepublic/jj40/config.h2
-rw-r--r--keyboards/kprepublic/jj40/info.json3
-rw-r--r--keyboards/kprepublic/jj4x4/config.h2
-rw-r--r--keyboards/kprepublic/jj4x4/info.json3
-rw-r--r--keyboards/littlealby/mute/config.h2
-rw-r--r--keyboards/littlealby/mute/info.json3
-rw-r--r--keyboards/orthocode/config.h2
-rw-r--r--keyboards/orthocode/info.json3
-rw-r--r--keyboards/p3d/glitch/config.h2
-rw-r--r--keyboards/p3d/glitch/info.json3
-rw-r--r--keyboards/peej/lumberjack/config.h19
-rw-r--r--keyboards/peej/lumberjack/info.json3
-rw-r--r--keyboards/peej/rosaline/config.h2
-rw-r--r--keyboards/peej/rosaline/ortho/info.json3
-rw-r--r--keyboards/peej/rosaline/staggered/info.json3
-rw-r--r--keyboards/ploopyco/mouse/config.h2
-rw-r--r--keyboards/ploopyco/mouse/info.json3
-rw-r--r--keyboards/ploopyco/trackball/config.h2
-rw-r--r--keyboards/ploopyco/trackball/info.json3
-rw-r--r--keyboards/ploopyco/trackball_mini/config.h2
-rw-r--r--keyboards/ploopyco/trackball_mini/info.json3
-rw-r--r--keyboards/ploopyco/trackball_nano/config.h2
-rw-r--r--keyboards/ploopyco/trackball_nano/info.json3
-rw-r--r--keyboards/punk75/config.h2
-rw-r--r--keyboards/rgbkb/pan/config.h1
-rw-r--r--keyboards/ryanskidmore/rskeys100/config.h3
-rw-r--r--keyboards/sendyyeah/pix/config.h2
-rw-r--r--keyboards/tokyokeyboard/tokyo60/config.h3
-rw-r--r--keyboards/tokyokeyboard/tokyo60/info.json3
-rw-r--r--keyboards/torn/config.h2
-rw-r--r--keyboards/torn/info.json3
-rw-r--r--keyboards/trashman/ketch/config.h1
-rw-r--r--keyboards/trashman/ketch/info.json3
-rw-r--r--keyboards/tronguylabs/m122_3270/config.h21
-rw-r--r--keyboards/tronguylabs/m122_3270/info.json3
-rw-r--r--keyboards/uranuma/config.h4
-rw-r--r--keyboards/uranuma/info.json3
-rw-r--r--keyboards/work_louder/loop/config.h2
-rw-r--r--keyboards/work_louder/loop/info.json3
-rw-r--r--keyboards/work_louder/micro/config.h6
-rw-r--r--keyboards/work_louder/micro/info.json3
-rw-r--r--keyboards/work_louder/nano/config.h2
-rw-r--r--keyboards/work_louder/nano/info.json3
-rw-r--r--keyboards/work_louder/work_board/config.h2
-rw-r--r--keyboards/work_louder/work_board/info.json3
-rw-r--r--keyboards/yiancardesigns/barleycorn/config.h3
-rw-r--r--keyboards/yiancardesigns/barleycorn/info.json3
-rw-r--r--keyboards/yiancardesigns/gingham/config.h2
-rw-r--r--keyboards/yiancardesigns/gingham/info.json3
-rw-r--r--keyboards/yiancardesigns/seigaiha/config.h2
-rw-r--r--keyboards/yiancardesigns/seigaiha/info.json3
-rw-r--r--keyboards/ymdk/np21/config.h2
-rw-r--r--keyboards/ymdk/np21/info.json3
-rw-r--r--keyboards/ymdk/ymd96/config.h2
-rw-r--r--keyboards/ymdk/ymd96/info.json3
99 files changed, 90 insertions, 226 deletions
diff --git a/keyboards/barleycorn_smd/config.h b/keyboards/barleycorn_smd/config.h
index 2d53b280f7..167c3b5c87 100644
--- a/keyboards/barleycorn_smd/config.h
+++ b/keyboards/barleycorn_smd/config.h
@@ -54,9 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-#define USB_MAX_POWER_CONSUMPTION 400
-
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/barleycorn_smd/info.json b/keyboards/barleycorn_smd/info.json
index b37d4003f7..0f759e5f4d 100644
--- a/keyboards/barleycorn_smd/info.json
+++ b/keyboards/barleycorn_smd/info.json
@@ -5,7 +5,8 @@
"usb": {
"vid": "0x7033",
"pid": "0x4749",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 400
},
"indicators": {
"caps_lock": "B2",
diff --git a/keyboards/basketweave/config.h b/keyboards/basketweave/config.h
index 87864e2bf4..36054e7bb6 100644
--- a/keyboards/basketweave/config.h
+++ b/keyboards/basketweave/config.h
@@ -16,8 +16,6 @@
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/basketweave/info.json b/keyboards/basketweave/info.json
index 825364424b..8f9be9b406 100644
--- a/keyboards/basketweave/info.json
+++ b/keyboards/basketweave/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x6B62",
"pid": "0x8989",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["A0", "A1", "A2", "A3", "A4", "B0", "B1", "B2", "D5", "D6", "C5", "C4", "C3", "C2", "C1"],
diff --git a/keyboards/chavdai40/rev1/config.h b/keyboards/chavdai40/rev1/config.h
index 277219f16d..8f5f5496a2 100644
--- a/keyboards/chavdai40/rev1/config.h
+++ b/keyboards/chavdai40/rev1/config.h
@@ -19,6 +19,3 @@
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE
-
-/* usb power settings */
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/chavdai40/rev1/info.json b/keyboards/chavdai40/rev1/info.json
index 511dff4ad1..67705c25bb 100644
--- a/keyboards/chavdai40/rev1/info.json
+++ b/keyboards/chavdai40/rev1/info.json
@@ -1,7 +1,8 @@
{
"keyboard_name": "Chavdai40",
"usb": {
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B8", "B4", "B3", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1"],
diff --git a/keyboards/chavdai40/rev2/config.h b/keyboards/chavdai40/rev2/config.h
index 277219f16d..8f5f5496a2 100644
--- a/keyboards/chavdai40/rev2/config.h
+++ b/keyboards/chavdai40/rev2/config.h
@@ -19,6 +19,3 @@
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE
-
-/* usb power settings */
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/chavdai40/rev2/info.json b/keyboards/chavdai40/rev2/info.json
index 97cd474fa0..acefcabdc7 100644
--- a/keyboards/chavdai40/rev2/info.json
+++ b/keyboards/chavdai40/rev2/info.json
@@ -1,7 +1,8 @@
{
"keyboard_name": "Chavdai40 rev2",
"usb": {
- "device_version": "0.0.2"
+ "device_version": "0.0.2",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B7", "B4", "B3", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1"],
diff --git a/keyboards/coseyfannitutti/discipad/config.h b/keyboards/coseyfannitutti/discipad/config.h
index edcaedfb79..31a3fe8cb0 100644
--- a/keyboards/coseyfannitutti/discipad/config.h
+++ b/keyboards/coseyfannitutti/discipad/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/discipad/info.json b/keyboards/coseyfannitutti/discipad/info.json
index d7291698b3..9ce76c840a 100644
--- a/keyboards/coseyfannitutti/discipad/info.json
+++ b/keyboards/coseyfannitutti/discipad/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x6B62",
"pid": "0x1769",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["C0", "C1", "C2", "C3"],
diff --git a/keyboards/coseyfannitutti/discipline/config.h b/keyboards/coseyfannitutti/discipline/config.h
index d43ae80cb9..0acee7345a 100644
--- a/keyboards/coseyfannitutti/discipline/config.h
+++ b/keyboards/coseyfannitutti/discipline/config.h
@@ -16,8 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/discipline/info.json b/keyboards/coseyfannitutti/discipline/info.json
index e699bc0a46..f28e0cd4d8 100644
--- a/keyboards/coseyfannitutti/discipline/info.json
+++ b/keyboards/coseyfannitutti/discipline/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x6B62",
"pid": "0x6869",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["A2", "B3", "A3", "B4", "A4", "D5", "D6", "C6", "C5", "C4", "C3", "C2", "C1", "C0", "D7"],
diff --git a/keyboards/crimsonkeyboards/resume1800/config.h b/keyboards/crimsonkeyboards/resume1800/config.h
index 7c66ab16c6..bdc484a3b3 100644
--- a/keyboards/crimsonkeyboards/resume1800/config.h
+++ b/keyboards/crimsonkeyboards/resume1800/config.h
@@ -16,8 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/crimsonkeyboards/resume1800/info.json b/keyboards/crimsonkeyboards/resume1800/info.json
index b8cd36dbed..664a69e22e 100644
--- a/keyboards/crimsonkeyboards/resume1800/info.json
+++ b/keyboards/crimsonkeyboards/resume1800/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0xFEED",
"pid": "0xC18B",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["A2", "B3", "A3", "B4", "A4", "D1", "D5", "D6", "A6", "A7", "C7", "C6", "C5", "C4", "D7", "C3", "C2", "C1", "C0", "D0"],
diff --git a/keyboards/dm9records/plaid/config.h b/keyboards/dm9records/plaid/config.h
index b4b541dbfc..71400c3cf8 100644
--- a/keyboards/dm9records/plaid/config.h
+++ b/keyboards/dm9records/plaid/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dm9records/plaid/info.json b/keyboards/dm9records/plaid/info.json
index cedf1fae5d..a18de0accd 100644
--- a/keyboards/dm9records/plaid/info.json
+++ b/keyboards/dm9records/plaid/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x16C0",
"pid": "0x27DB",
- "device_version": "0.0.2"
+ "device_version": "0.0.2",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B0", "D7", "D6", "D5", "B2", "B1", "C0", "C1", "C2", "C3", "D1", "D0"],
diff --git a/keyboards/ericrlau/numdiscipline/rev1/config.h b/keyboards/ericrlau/numdiscipline/rev1/config.h
index d5c2b1438e..055e8afe38 100644
--- a/keyboards/ericrlau/numdiscipline/rev1/config.h
+++ b/keyboards/ericrlau/numdiscipline/rev1/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ericrlau/numdiscipline/rev1/info.json b/keyboards/ericrlau/numdiscipline/rev1/info.json
index dd5a8a7a16..efcbcf2ab0 100644
--- a/keyboards/ericrlau/numdiscipline/rev1/info.json
+++ b/keyboards/ericrlau/numdiscipline/rev1/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x454C",
"pid": "0x0001",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["A2", "B3", "A3", "B4", "A4", "D5", "D6", "C6", "C5", "C4", "C3", "C2", "C1", "C0", "D7", "A5", "A6", "A7"],
diff --git a/keyboards/gboards/ergotaco/config.h b/keyboards/gboards/ergotaco/config.h
index ba0078e71b..456eb3f9d9 100644
--- a/keyboards/gboards/ergotaco/config.h
+++ b/keyboards/gboards/ergotaco/config.h
@@ -43,5 +43,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key combination for command */
#define IS_COMMAND() (get_mods() == MOD_MASK_CTRL || get_mods() == MOD_MASK_SHIFT)
-
-#define USB_MAX_POWER_CONSUMPTION 500
diff --git a/keyboards/gboards/georgi/config.h b/keyboards/gboards/georgi/config.h
index 99bdd06bb5..db2ff42a1e 100644
--- a/keyboards/gboards/georgi/config.h
+++ b/keyboards/gboards/georgi/config.h
@@ -51,5 +51,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
-
-#define USB_MAX_POWER_CONSUMPTION 500
diff --git a/keyboards/gboards/gergo/config.h b/keyboards/gboards/gergo/config.h
index 37d4fe8499..dbff6ccf6f 100644
--- a/keyboards/gboards/gergo/config.h
+++ b/keyboards/gboards/gergo/config.h
@@ -55,5 +55,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
-
-#define USB_MAX_POWER_CONSUMPTION 500
diff --git a/keyboards/handwired/dactyl/config.h b/keyboards/handwired/dactyl/config.h
index 0b98f64a4f..f37a8f2722 100644
--- a/keyboards/handwired/dactyl/config.h
+++ b/keyboards/handwired/dactyl/config.h
@@ -49,5 +49,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* fix space cadet rollover issue */
#define DISABLE_SPACE_CADET_ROLLOVER
-
-#define USB_MAX_POWER_CONSUMPTION 500
diff --git a/keyboards/handwired/dc/mc/001/config.h b/keyboards/handwired/dc/mc/001/config.h
index 4e9dfdea8c..533f50e018 100644
--- a/keyboards/handwired/dc/mc/001/config.h
+++ b/keyboards/handwired/dc/mc/001/config.h
@@ -32,5 +32,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_ACTION_LAYER
#define NO_ACTION_TAPPING
#define NO_ACTION_ONESHOT
-
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/handwired/dc/mc/001/info.json b/keyboards/handwired/dc/mc/001/info.json
index 852915569e..404cf2e45d 100644
--- a/keyboards/handwired/dc/mc/001/info.json
+++ b/keyboards/handwired/dc/mc/001/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x4443",
"pid": "0x4D43",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"encoder": {
"rotary": [
diff --git a/keyboards/handwired/frenchdev/config.h b/keyboards/handwired/frenchdev/config.h
index fc5d819060..9cb309c78f 100644
--- a/keyboards/handwired/frenchdev/config.h
+++ b/keyboards/handwired/frenchdev/config.h
@@ -25,8 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_BRIGHTNESS_LO 15
#define LED_BRIGHTNESS_HI 255
-#define USB_MAX_POWER_CONSUMPTION 500
-
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
#define MOUSEKEY_TIME_TO_MAX 5
diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h
index 3ebccf9ad2..611a6960cb 100644
--- a/keyboards/handwired/hnah40/config.h
+++ b/keyboards/handwired/hnah40/config.h
@@ -21,8 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-#define USB_MAX_POWER_CONSUMPTION 100
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/handwired/hnah40/info.json b/keyboards/handwired/hnah40/info.json
index a4ed0756e7..728d6dbc59 100644
--- a/keyboards/handwired/hnah40/info.json
+++ b/keyboards/handwired/hnah40/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0xFEED",
"pid": "0x0000",
- "device_version": "0.0.2"
+ "device_version": "0.0.2",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B0", "D7", "D6", "D5", "B2", "B1", "C0", "C1", "C2", "C3", "D1"],
diff --git a/keyboards/handwired/lovelive9/config.h b/keyboards/handwired/lovelive9/config.h
index e6499e9111..092e83d9d5 100644
--- a/keyboards/handwired/lovelive9/config.h
+++ b/keyboards/handwired/lovelive9/config.h
@@ -19,6 +19,5 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
-#define USB_MAX_POWER_CONSUMPTION 400
#define TAPPING_TERM 200
diff --git a/keyboards/handwired/lovelive9/info.json b/keyboards/handwired/lovelive9/info.json
index 25dc85704d..4000b543c3 100644
--- a/keyboards/handwired/lovelive9/info.json
+++ b/keyboards/handwired/lovelive9/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0xFEED",
"pid": "0x0007",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 400
},
"matrix_pins": {
"cols": ["B4", "B6", "B2", "D7", "B1", "F7", "F6", "F5", "F4"],
diff --git a/keyboards/hotdox/config.h b/keyboards/hotdox/config.h
index 56eda36984..4e801399da 100644
--- a/keyboards/hotdox/config.h
+++ b/keyboards/hotdox/config.h
@@ -34,8 +34,6 @@
/* fix space cadet rollover issue */
#define DISABLE_SPACE_CADET_ROLLOVER
-#define USB_MAX_POWER_CONSUMPTION 500
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/jkdlab/binary_monkey/config.h b/keyboards/jkdlab/binary_monkey/config.h
deleted file mode 100644
index 3b83277d42..0000000000
--- a/keyboards/jkdlab/binary_monkey/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2021 JKDLAB. <jkdlab.co@gmail.com>
- * Copyright 2021 Jaehee <ljh34210329@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License,
- * or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-
-#pragma once
-
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/jkdlab/binary_monkey/info.json b/keyboards/jkdlab/binary_monkey/info.json
index 43ba146854..50b92ff899 100644
--- a/keyboards/jkdlab/binary_monkey/info.json
+++ b/keyboards/jkdlab/binary_monkey/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x4934",
"pid": "0x0101",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["D1", "D2", "D3"],
diff --git a/keyboards/kagizaraya/chidori/config.h b/keyboards/kagizaraya/chidori/config.h
index 51f8958e20..eb719e9504 100644
--- a/keyboards/kagizaraya/chidori/config.h
+++ b/keyboards/kagizaraya/chidori/config.h
@@ -48,7 +48,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
/* USB config */
-#define USB_MAX_POWER_CONSUMPTION 100
#define USB_COUNT_SOF 0
#define USB_INTR_CFG_SET (1 << ISC01)
#define USB_INTR_ENABLE_BIT INT0
diff --git a/keyboards/kagizaraya/chidori/info.json b/keyboards/kagizaraya/chidori/info.json
index 16cd17f942..6603f54b03 100644
--- a/keyboards/kagizaraya/chidori/info.json
+++ b/keyboards/kagizaraya/chidori/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0xFEED",
"pid": "0x3942",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"processor": "atmega328p",
"bootloader": "usbasploader",
diff --git a/keyboards/keycapsss/plaid_pad/config.h b/keyboards/keycapsss/plaid_pad/config.h
index 0ac7d2ee62..984323f63c 100644
--- a/keyboards/keycapsss/plaid_pad/config.h
+++ b/keyboards/keycapsss/plaid_pad/config.h
@@ -16,7 +16,5 @@
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
// Fix for volume controll with encoder (steadily in/decrease)
#define TAP_CODE_DELAY 60
diff --git a/keyboards/keycapsss/plaid_pad/info.json b/keyboards/keycapsss/plaid_pad/info.json
index 6ff2d2cea2..9fe02448d0 100644
--- a/keyboards/keycapsss/plaid_pad/info.json
+++ b/keyboards/keycapsss/plaid_pad/info.json
@@ -4,7 +4,8 @@
"maintainer": "BenRoe",
"usb": {
"vid": "0x7983",
- "pid": "0x5050"
+ "pid": "0x5050",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B0", "D7", "D6", "D5"],
diff --git a/keyboards/kinesis/kint2pp/config.h b/keyboards/kinesis/kint2pp/config.h
deleted file mode 100644
index b81985f1ef..0000000000
--- a/keyboards/kinesis/kint2pp/config.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#pragma once
-
-// The Teensy 2++ consumes about 60 mA of current at its full speed of 16 MHz as
-// per https://www.pjrc.com/teensy/low_power.html
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/kinesis/kint2pp/info.json b/keyboards/kinesis/kint2pp/info.json
index b2ddfb80b0..74d96d59e0 100644
--- a/keyboards/kinesis/kint2pp/info.json
+++ b/keyboards/kinesis/kint2pp/info.json
@@ -4,7 +4,8 @@
"usb": {
"vid": "0xFEED",
"pid": "0x6060",
- "device_version": "0.0.2"
+ "device_version": "0.0.2",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["E7", "F0", "F7", "B1", "B3", "B0", "D5"],
diff --git a/keyboards/kinesis/kint36/config.h b/keyboards/kinesis/kint36/config.h
index 8b291df88e..94e523e9ef 100644
--- a/keyboards/kinesis/kint36/config.h
+++ b/keyboards/kinesis/kint36/config.h
@@ -16,8 +16,4 @@
#pragma once
-// The Teensy 3.6 consumes about 80 mA of current at its full speed of 180 MHz:
-// https://forum.pjrc.com/threads/47256-What-is-the-power-consumption-of-the-Teensy-3-6
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define EEPROM_SIZE 4096
diff --git a/keyboards/kinesis/kint36/info.json b/keyboards/kinesis/kint36/info.json
index 2d71fc0eb3..815b6cb871 100644
--- a/keyboards/kinesis/kint36/info.json
+++ b/keyboards/kinesis/kint36/info.json
@@ -4,7 +4,8 @@
"usb": {
"vid": "0x1209",
"pid": "0x345C",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B3", "D1", "C0", "D5", "C1", "B2", "D4"],
diff --git a/keyboards/kinesis/kint41/config.h b/keyboards/kinesis/kint41/config.h
index 74d1a8a78f..e620abd09e 100644
--- a/keyboards/kinesis/kint41/config.h
+++ b/keyboards/kinesis/kint41/config.h
@@ -16,10 +16,6 @@
#pragma once
-// The Teensy 4.1 consumes about 100 mA of current at its full speed of 600 MHz
-// as per https://www.pjrc.com/store/teensy41.html
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the
* AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock,
* i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information.
diff --git a/keyboards/kinesis/kint41/info.json b/keyboards/kinesis/kint41/info.json
index 0a6424641a..1901ed1d3b 100644
--- a/keyboards/kinesis/kint41/info.json
+++ b/keyboards/kinesis/kint41/info.json
@@ -4,7 +4,8 @@
"usb": {
"vid": "0x1209",
"pid": "0x345C",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["LINE_PIN18", "LINE_PIN14", "LINE_PIN15", "LINE_PIN20", "LINE_PIN22", "LINE_PIN19", "LINE_PIN6"],
diff --git a/keyboards/kinesis/kintlc/config.h b/keyboards/kinesis/kintlc/config.h
index a5610a4c8c..e620abd09e 100644
--- a/keyboards/kinesis/kintlc/config.h
+++ b/keyboards/kinesis/kintlc/config.h
@@ -16,11 +16,6 @@
#pragma once
-// The Teensy LC power consumption is unknown as per
-// https://www.pjrc.com/store/teensylc.html but since
-// https://www.pjrc.com/store/teensy41.html says 100mA, let's go with half.
-#define USB_MAX_POWER_CONSUMPTION 50
-
/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the
* AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock,
* i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information.
diff --git a/keyboards/kinesis/kintlc/info.json b/keyboards/kinesis/kintlc/info.json
index 6c8938ab35..da8e8f7e45 100644
--- a/keyboards/kinesis/kintlc/info.json
+++ b/keyboards/kinesis/kintlc/info.json
@@ -4,7 +4,8 @@
"usb": {
"vid": "0x1209",
"pid": "0x345C",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 50
},
"matrix_pins": {
"cols": ["LINE_PIN18", "LINE_PIN14", "LINE_PIN15", "LINE_PIN20", "LINE_PIN22", "LINE_PIN19", "LINE_PIN6"],
diff --git a/keyboards/kprepublic/jj40/config.h b/keyboards/kprepublic/jj40/config.h
index f26971a5a3..d77984fc69 100644
--- a/keyboards/kprepublic/jj40/config.h
+++ b/keyboards/kprepublic/jj40/config.h
@@ -27,5 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/kprepublic/jj40/info.json b/keyboards/kprepublic/jj40/info.json
index c41c139606..e5dacd90da 100644
--- a/keyboards/kprepublic/jj40/info.json
+++ b/keyboards/kprepublic/jj40/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x4B50",
"pid": "0x0040",
- "device_version": "2.0.0"
+ "device_version": "2.0.0",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["C4", "C5", "C6", "C7", "A4", "A5", "A6", "A7", "A3", "A2", "A1", "A0"],
diff --git a/keyboards/kprepublic/jj4x4/config.h b/keyboards/kprepublic/jj4x4/config.h
index c0220254b9..5646d4c653 100644
--- a/keyboards/kprepublic/jj4x4/config.h
+++ b/keyboards/kprepublic/jj4x4/config.h
@@ -30,5 +30,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/kprepublic/jj4x4/info.json b/keyboards/kprepublic/jj4x4/info.json
index 337b532f97..fce30c67b0 100644
--- a/keyboards/kprepublic/jj4x4/info.json
+++ b/keyboards/kprepublic/jj4x4/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x4B50",
"pid": "0x0044",
- "device_version": "2.0.0"
+ "device_version": "2.0.0",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["A1", "A0", "A2", "A3"],
diff --git a/keyboards/littlealby/mute/config.h b/keyboards/littlealby/mute/config.h
index bd2aa9c26b..3a5b0356a9 100644
--- a/keyboards/littlealby/mute/config.h
+++ b/keyboards/littlealby/mute/config.h
@@ -15,8 +15,6 @@
*/
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
#ifdef RGBLIGHT_ENABLE
#define RGBLED_NUM 1
#endif
diff --git a/keyboards/littlealby/mute/info.json b/keyboards/littlealby/mute/info.json
index 9d2a172116..a6392a76e7 100644
--- a/keyboards/littlealby/mute/info.json
+++ b/keyboards/littlealby/mute/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x4142",
"pid": "0x4D55",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"ws2812": {
"pin": "B6"
diff --git a/keyboards/orthocode/config.h b/keyboards/orthocode/config.h
index 3964ccec15..10987d87af 100644
--- a/keyboards/orthocode/config.h
+++ b/keyboards/orthocode/config.h
@@ -16,8 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define TAP_CODE_DELAY 10
#define RGBLED_NUM 10 /*Change for the number of leds on the strip you attach*/
diff --git a/keyboards/orthocode/info.json b/keyboards/orthocode/info.json
index 144075fde1..6b283da6cf 100644
--- a/keyboards/orthocode/info.json
+++ b/keyboards/orthocode/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x3415",
"pid": "0x0001",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["C4", "C3", "C2", "C1", "C0", "D7", "D6", "A7", "A4", "A5", "A6", "A3", "A2", "A1", "A0"],
diff --git a/keyboards/p3d/glitch/config.h b/keyboards/p3d/glitch/config.h
index 2db0b8566c..a754828053 100644
--- a/keyboards/p3d/glitch/config.h
+++ b/keyboards/p3d/glitch/config.h
@@ -29,8 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define USB_MAX_POWER_CONSUMPTION 400
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/p3d/glitch/info.json b/keyboards/p3d/glitch/info.json
index 9ff596476f..25dc17b820 100644
--- a/keyboards/p3d/glitch/info.json
+++ b/keyboards/p3d/glitch/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x7033",
"pid": "0x3568",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 400
},
"matrix_pins": {
"cols": ["B2", "D2", "B3", "B7", "F5", "F4", "F1", "F0"],
diff --git a/keyboards/peej/lumberjack/config.h b/keyboards/peej/lumberjack/config.h
deleted file mode 100644
index 0079764d8e..0000000000
--- a/keyboards/peej/lumberjack/config.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Copyright 2020 Paul James
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/peej/lumberjack/info.json b/keyboards/peej/lumberjack/info.json
index c65c4bea47..83b4a6e6c2 100644
--- a/keyboards/peej/lumberjack/info.json
+++ b/keyboards/peej/lumberjack/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x706A",
"pid": "0x0002",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B0", "D7", "D6", "D5", "D4", "D1", "D0", "C1", "C2", "C3"],
diff --git a/keyboards/peej/rosaline/config.h b/keyboards/peej/rosaline/config.h
index 18505def82..d36ddb96e9 100644
--- a/keyboards/peej/rosaline/config.h
+++ b/keyboards/peej/rosaline/config.h
@@ -16,7 +16,5 @@
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define LED1 C5
#define LED2 C4
diff --git a/keyboards/peej/rosaline/ortho/info.json b/keyboards/peej/rosaline/ortho/info.json
index c175aafb42..9fb9d3cb40 100644
--- a/keyboards/peej/rosaline/ortho/info.json
+++ b/keyboards/peej/rosaline/ortho/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x706A",
"pid": "0x0003",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B0", "D7", "D6", "C2", "D4", "D1", "D0", "C1"],
diff --git a/keyboards/peej/rosaline/staggered/info.json b/keyboards/peej/rosaline/staggered/info.json
index 0608f2a9f7..99796675e1 100644
--- a/keyboards/peej/rosaline/staggered/info.json
+++ b/keyboards/peej/rosaline/staggered/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x706A",
"pid": "0x0003",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["B0", "D7", "D6", "C2", "D4", "D1", "D0", "C1"],
diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h
index bc7e587ee7..9747969db4 100644
--- a/keyboards/ploopyco/mouse/config.h
+++ b/keyboards/ploopyco/mouse/config.h
@@ -23,8 +23,6 @@
#define UNUSABLE_PINS \
{ B4, D6, F1, F5, F6, F7 }
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
diff --git a/keyboards/ploopyco/mouse/info.json b/keyboards/ploopyco/mouse/info.json
index 96b91d89a6..e31a1eb4cd 100644
--- a/keyboards/ploopyco/mouse/info.json
+++ b/keyboards/ploopyco/mouse/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x5043",
"pid": "0x4D6F",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"bootmagic": {
"matrix": [0, 3]
diff --git a/keyboards/ploopyco/trackball/config.h b/keyboards/ploopyco/trackball/config.h
index de94eab9ba..de0ed1ebec 100644
--- a/keyboards/ploopyco/trackball/config.h
+++ b/keyboards/ploopyco/trackball/config.h
@@ -23,8 +23,6 @@
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define ROTATIONAL_TRANSFORM_ANGLE 20
// If board has a debug LED, you can enable it by defining this
diff --git a/keyboards/ploopyco/trackball/info.json b/keyboards/ploopyco/trackball/info.json
index a1f9c53284..ef6682f9e4 100644
--- a/keyboards/ploopyco/trackball/info.json
+++ b/keyboards/ploopyco/trackball/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x5043",
"pid": "0x5442",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"bootmagic": {
"matrix": [0, 3]
diff --git a/keyboards/ploopyco/trackball_mini/config.h b/keyboards/ploopyco/trackball_mini/config.h
index 2cb236fcd0..789deb5a5f 100644
--- a/keyboards/ploopyco/trackball_mini/config.h
+++ b/keyboards/ploopyco/trackball_mini/config.h
@@ -24,8 +24,6 @@
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-#define USB_MAX_POWER_CONSUMPTION 100
-
// If board has a debug LED, you can enable it by defining this
// #define DEBUG_LED_PIN F7
diff --git a/keyboards/ploopyco/trackball_mini/info.json b/keyboards/ploopyco/trackball_mini/info.json
index e3daea0575..7d040aa5bf 100644
--- a/keyboards/ploopyco/trackball_mini/info.json
+++ b/keyboards/ploopyco/trackball_mini/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x5043",
"pid": "0x1EAB",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"bootmagic": {
"matrix": [0, 3]
diff --git a/keyboards/ploopyco/trackball_nano/config.h b/keyboards/ploopyco/trackball_nano/config.h
index c8e74cc271..e2ebde3263 100644
--- a/keyboards/ploopyco/trackball_nano/config.h
+++ b/keyboards/ploopyco/trackball_nano/config.h
@@ -24,8 +24,6 @@
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define ADNS5050_SCLK_PIN B7
#define ADNS5050_SDIO_PIN C6
#define ADNS5050_CS_PIN B4
diff --git a/keyboards/ploopyco/trackball_nano/info.json b/keyboards/ploopyco/trackball_nano/info.json
index 522ff43d99..5295548573 100644
--- a/keyboards/ploopyco/trackball_nano/info.json
+++ b/keyboards/ploopyco/trackball_nano/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x5043",
"pid": "0x54A3",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/punk75/config.h b/keyboards/punk75/config.h
index a8b9af7999..b314f6dae9 100644
--- a/keyboards/punk75/config.h
+++ b/keyboards/punk75/config.h
@@ -19,8 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED A0
-#define USB_MAX_POWER_CONSUMPTION 500
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/rgbkb/pan/config.h b/keyboards/rgbkb/pan/config.h
index f1b323bc17..2bd147df5b 100644
--- a/keyboards/rgbkb/pan/config.h
+++ b/keyboards/rgbkb/pan/config.h
@@ -30,7 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_MATRIX_LED_COUNT RGBLED_NUM
#define RGBLIGHT_LIMIT_VAL 120
-#define USB_MAX_POWER_CONSUMPTION 500
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
diff --git a/keyboards/ryanskidmore/rskeys100/config.h b/keyboards/ryanskidmore/rskeys100/config.h
index 84fd3381ed..1ec96ddfdf 100644
--- a/keyboards/ryanskidmore/rskeys100/config.h
+++ b/keyboards/ryanskidmore/rskeys100/config.h
@@ -42,6 +42,3 @@
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-
-/* Set the max power consumption for the keyboard, which is 500 mA. */
-#define USB_MAX_POWER_CONSUMPTION 500
diff --git a/keyboards/sendyyeah/pix/config.h b/keyboards/sendyyeah/pix/config.h
index 2030d914d6..88d255f6c0 100644
--- a/keyboards/sendyyeah/pix/config.h
+++ b/keyboards/sendyyeah/pix/config.h
@@ -25,8 +25,6 @@
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-#define USB_MAX_POWER_CONSUMPTION 500
-
#define RGBLED_NUM 15
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
diff --git a/keyboards/tokyokeyboard/tokyo60/config.h b/keyboards/tokyokeyboard/tokyo60/config.h
index 800cb31a2f..dd58e34f08 100644
--- a/keyboards/tokyokeyboard/tokyo60/config.h
+++ b/keyboards/tokyokeyboard/tokyo60/config.h
@@ -1,8 +1,5 @@
#pragma once
-/* Set power consumption to work with mobile devices */
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/tokyokeyboard/tokyo60/info.json b/keyboards/tokyokeyboard/tokyo60/info.json
index cd2cfe2248..aae81a4a6b 100644
--- a/keyboards/tokyokeyboard/tokyo60/info.json
+++ b/keyboards/tokyokeyboard/tokyo60/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x5436",
"pid": "0x6060",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B2", "B5", "B4", "D7", "D6", "B3"],
diff --git a/keyboards/torn/config.h b/keyboards/torn/config.h
index 0b56ef812d..6025d55b1c 100644
--- a/keyboards/torn/config.h
+++ b/keyboards/torn/config.h
@@ -45,6 +45,4 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define OLED_TIMEOUT 60000
diff --git a/keyboards/torn/info.json b/keyboards/torn/info.json
index c5294d14af..c1b83188f0 100644
--- a/keyboards/torn/info.json
+++ b/keyboards/torn/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x7274",
"pid": "0x0001",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"encoder": {
"rotary": [
diff --git a/keyboards/trashman/ketch/config.h b/keyboards/trashman/ketch/config.h
index 64c34a8008..0f391f70ba 100644
--- a/keyboards/trashman/ketch/config.h
+++ b/keyboards/trashman/ketch/config.h
@@ -22,7 +22,6 @@ SOFTWARE.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
#define RGBLED_NUM 10
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/trashman/ketch/info.json b/keyboards/trashman/ketch/info.json
index 02dc364a35..21f3bb7ec3 100644
--- a/keyboards/trashman/ketch/info.json
+++ b/keyboards/trashman/ketch/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0xFEAE",
"pid": "0x8947",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"ws2812": {
"pin": "F4"
diff --git a/keyboards/tronguylabs/m122_3270/config.h b/keyboards/tronguylabs/m122_3270/config.h
deleted file mode 100644
index 754e0977c4..0000000000
--- a/keyboards/tronguylabs/m122_3270/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Copyright 2021 James R. Maynard III <jaymaynard@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-// Both controllers draw 100 mA or less
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/tronguylabs/m122_3270/info.json b/keyboards/tronguylabs/m122_3270/info.json
index 2dae824cc4..364ab250dc 100644
--- a/keyboards/tronguylabs/m122_3270/info.json
+++ b/keyboards/tronguylabs/m122_3270/info.json
@@ -4,7 +4,8 @@
"maintainer": "jmaynard",
"usb": {
"vid": "0x1209",
- "pid": "0x3270"
+ "pid": "0x3270",
+ "max_power": 100
},
"debounce": 15,
"layouts": {
diff --git a/keyboards/uranuma/config.h b/keyboards/uranuma/config.h
index 39bb20f2a8..7bc78f68d6 100644
--- a/keyboards/uranuma/config.h
+++ b/keyboards/uranuma/config.h
@@ -1,9 +1,5 @@
#pragma once
-// fix iPhone and iPad power adapter issue
-// iOS device need lessthan 100
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/uranuma/info.json b/keyboards/uranuma/info.json
index 2dd2bd9e53..f7019e0c86 100644
--- a/keyboards/uranuma/info.json
+++ b/keyboards/uranuma/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0xFEED",
"pid": "0x112D",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D2", "D4"],
diff --git a/keyboards/work_louder/loop/config.h b/keyboards/work_louder/loop/config.h
index 4d5bcf9dba..93b3b54184 100644
--- a/keyboards/work_louder/loop/config.h
+++ b/keyboards/work_louder/loop/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define RGBLIGHT_DI_PIN E6
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
diff --git a/keyboards/work_louder/loop/info.json b/keyboards/work_louder/loop/info.json
index 64aed890de..be5d470382 100644
--- a/keyboards/work_louder/loop/info.json
+++ b/keyboards/work_louder/loop/info.json
@@ -5,7 +5,8 @@
"maintainer": "Work Louder",
"usb": {
"vid": "0x574C",
- "pid": "0x1DF9"
+ "pid": "0x1DF9",
+ "max_power": 100
},
"rgb_matrix": {
"driver": "WS2812"
diff --git a/keyboards/work_louder/micro/config.h b/keyboards/work_louder/micro/config.h
index f23c5a4ef1..234b1de602 100644
--- a/keyboards/work_louder/micro/config.h
+++ b/keyboards/work_louder/micro/config.h
@@ -4,12 +4,6 @@
#pragma once
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define RGB_MATRIX_LED_COUNT 12
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
#define RGB_MATRIX_DISABLE_KEYCODES
diff --git a/keyboards/work_louder/micro/info.json b/keyboards/work_louder/micro/info.json
index f6b45226a0..80c1c259f5 100644
--- a/keyboards/work_louder/micro/info.json
+++ b/keyboards/work_louder/micro/info.json
@@ -49,7 +49,8 @@
"usb": {
"device_version": "1.0.0",
"pid": "0xE6E3",
- "vid": "0x574C"
+ "vid": "0x574C",
+ "max_power": 100
},
"encoder": {
"rotary": [
diff --git a/keyboards/work_louder/nano/config.h b/keyboards/work_louder/nano/config.h
index 265da302e5..74427859cb 100644
--- a/keyboards/work_louder/nano/config.h
+++ b/keyboards/work_louder/nano/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define RGBLIGHT_DI_PIN C7
#define RGBLED_NUM 6
//# define RGBLIGHT_HUE_STEP 8
diff --git a/keyboards/work_louder/nano/info.json b/keyboards/work_louder/nano/info.json
index 70da0e4cc4..097ad1f045 100644
--- a/keyboards/work_louder/nano/info.json
+++ b/keyboards/work_louder/nano/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x574C",
"pid": "0xE6F0",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"rgb_matrix": {
"driver": "WS2812"
diff --git a/keyboards/work_louder/work_board/config.h b/keyboards/work_louder/work_board/config.h
index 8f392bd050..1d8feeff58 100644
--- a/keyboards/work_louder/work_board/config.h
+++ b/keyboards/work_louder/work_board/config.h
@@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define USB_MAX_POWER_CONSUMPTION 100
-
#define RGBLIGHT_DI_PIN D2
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
diff --git a/keyboards/work_louder/work_board/info.json b/keyboards/work_louder/work_board/info.json
index b79a1144a1..1b3bd41520 100644
--- a/keyboards/work_louder/work_board/info.json
+++ b/keyboards/work_louder/work_board/info.json
@@ -5,7 +5,8 @@
"maintainer": "Work Louder",
"usb": {
"vid": "0x574C",
- "pid": "0xDCD1"
+ "pid": "0xDCD1",
+ "max_power": 100
},
"rgb_matrix": {
"driver": "WS2812"
diff --git a/keyboards/yiancardesigns/barleycorn/config.h b/keyboards/yiancardesigns/barleycorn/config.h
index 5eed7521ff..5e90dd3515 100644
--- a/keyboards/yiancardesigns/barleycorn/config.h
+++ b/keyboards/yiancardesigns/barleycorn/config.h
@@ -41,9 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-#define USB_MAX_POWER_CONSUMPTION 100
-
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/yiancardesigns/barleycorn/info.json b/keyboards/yiancardesigns/barleycorn/info.json
index ad19574eae..99786319b3 100644
--- a/keyboards/yiancardesigns/barleycorn/info.json
+++ b/keyboards/yiancardesigns/barleycorn/info.json
@@ -5,7 +5,8 @@
"usb": {
"vid": "0x8968",
"pid": "0x4749",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"processor": "atmega328p",
"bootloader": "usbasploader",
diff --git a/keyboards/yiancardesigns/gingham/config.h b/keyboards/yiancardesigns/gingham/config.h
index cf19c1bb22..fe06114dd5 100644
--- a/keyboards/yiancardesigns/gingham/config.h
+++ b/keyboards/yiancardesigns/gingham/config.h
@@ -41,8 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/yiancardesigns/gingham/info.json b/keyboards/yiancardesigns/gingham/info.json
index c09db75564..c0b1644fea 100644
--- a/keyboards/yiancardesigns/gingham/info.json
+++ b/keyboards/yiancardesigns/gingham/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x8968",
"pid": "0x4748",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"processor": "atmega328p",
"bootloader": "usbasploader",
diff --git a/keyboards/yiancardesigns/seigaiha/config.h b/keyboards/yiancardesigns/seigaiha/config.h
index de93e5ecb2..70ce1c29ab 100644
--- a/keyboards/yiancardesigns/seigaiha/config.h
+++ b/keyboards/yiancardesigns/seigaiha/config.h
@@ -41,8 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/yiancardesigns/seigaiha/info.json b/keyboards/yiancardesigns/seigaiha/info.json
index fca905283e..26ab6ab528 100644
--- a/keyboards/yiancardesigns/seigaiha/info.json
+++ b/keyboards/yiancardesigns/seigaiha/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x8968",
"pid": "0x4750",
- "device_version": "0.0.1"
+ "device_version": "0.0.1",
+ "max_power": 100
},
"bootmagic": {
"matrix": [1, 0]
diff --git a/keyboards/ymdk/np21/config.h b/keyboards/ymdk/np21/config.h
index 81bfa2e81a..e97ca9ea63 100644
--- a/keyboards/ymdk/np21/config.h
+++ b/keyboards/ymdk/np21/config.h
@@ -54,5 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/ymdk/np21/info.json b/keyboards/ymdk/np21/info.json
index 1c4651c94c..62fdf7e20c 100644
--- a/keyboards/ymdk/np21/info.json
+++ b/keyboards/ymdk/np21/info.json
@@ -5,7 +5,8 @@
"usb": {
"vid": "0x594D",
"pid": "0x5021",
- "device_version": "2.0.0"
+ "device_version": "2.0.0",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["A0", "A1", "A2", "A3", "A4", "A5"],
diff --git a/keyboards/ymdk/ymd96/config.h b/keyboards/ymdk/ymd96/config.h
index 3b6ffded66..ecb03b5917 100644
--- a/keyboards/ymdk/ymd96/config.h
+++ b/keyboards/ymdk/ymd96/config.h
@@ -21,8 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define TAPPING_TOGGLE 3
-#define USB_MAX_POWER_CONSUMPTION 100
-
/* RGB underglow */
#define RGBLED_NUM 18
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/ymdk/ymd96/info.json b/keyboards/ymdk/ymd96/info.json
index d24d4fa4cd..96f83d3412 100644
--- a/keyboards/ymdk/ymd96/info.json
+++ b/keyboards/ymdk/ymd96/info.json
@@ -6,7 +6,8 @@
"usb": {
"vid": "0x20A0",
"pid": "0x422D",
- "device_version": "2.0.0"
+ "device_version": "2.0.0",
+ "max_power": 100
},
"matrix_pins": {
"cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7"],