[Keyboard] Added different wiring of dactyl (#17997)

7 files changed, 222 insertions, 0 deletions

diff --git a/keyboards/handwired/skakunm_dactyl/config.h b/keyboards/handwired/skakunm_dactyl/config.h
new file mode 100644
index 0000000000..1fb0cc6b2a
--- /dev/null
+++ b/keyboards/handwired/skakunm_dactyl/config.h
@@ -0,0 +1,60 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+// wiring of each half
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_ROW_PINS { B1, B3, B2, B6 }
+
+#define DIODE_DIRECTION COL2ROW
+
+/* mouse config */
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D0
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Enables This makes it easier for fast typists to use dual-function keys */
+#define PERMISSIVE_HOLD
+
+/* ws2812 RGB LED */
+//#define RGB_DI_PIN D3
+
+//#define RGBLED_NUM 12    // Number of LEDs
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
diff --git a/keyboards/handwired/skakunm_dactyl/info.json b/keyboards/handwired/skakunm_dactyl/info.json
new file mode 100644
index 0000000000..2eed23d809
--- /dev/null
+++ b/keyboards/handwired/skakunm_dactyl/info.json
@@ -0,0 +1,57 @@
+{
+    "keyboard_name": "Dactyl Min (3x5_5)",
+    "manufacturer": "skakunm",
+    "url": "",
+    "maintainer": "qmk",
+    "usb": {
+        "vid": "0xFEED",
+        "pid": "0x3060",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT_3x5_5": {
+            "layout": [
+                {"label":"L10", "x":0, "y":0},
+                {"label":"L11", "x":1, "y":0},
+                {"label":"L12", "x":2, "y":0},
+                {"label":"L13", "x":3, "y":0},
+                {"label":"L14", "x":4, "y":0},
+                {"label":"R13", "x":9, "y":0},
+                {"label":"R13", "x":10, "y":0},
+                {"label":"R12", "x":11, "y":0},
+                {"label":"R11", "x":12, "y":0},
+                {"label":"R10", "x":13, "y":0},
+                {"label":"L20", "x":0, "y":1},
+                {"label":"L21", "x":1, "y":1},
+                {"label":"L22", "x":2, "y":1},
+                {"label":"L23", "x":3, "y":1},
+                {"label":"L24", "x":4, "y":1},
+                {"label":"R23", "x":9, "y":1},
+                {"label":"R23", "x":10, "y":1},
+                {"label":"R22", "x":11, "y":1},
+                {"label":"R21", "x":12, "y":1},
+                {"label":"R20", "x":13, "y":1},
+                {"label":"L30", "x":0, "y":2},
+                {"label":"L31", "x":1, "y":2},
+                {"label":"L32", "x":2, "y":2},
+                {"label":"L33", "x":3, "y":2},
+                {"label":"L34", "x":4, "y":2},
+                {"label":"R33", "x":9, "y":2},
+                {"label":"R33", "x":10, "y":2},
+                {"label":"R32", "x":11, "y":2},
+                {"label":"R31", "x":12, "y":2},
+                {"label":"R30", "x":13, "y":2},
+                {"label":"L00", "x":4, "y":3},
+                {"label":"L01", "x":5, "y":3},
+                {"label":"R01", "x":8, "y":3},
+                {"label":"R00", "x":9, "y":3},
+                {"label":"L02", "x":4, "y":4},
+                {"label":"L03", "x":5, "y":4},
+                {"label":"L04", "x":6, "y":4},
+                {"label":"R04", "x":7, "y":4},
+                {"label":"R03", "x":8, "y":4},
+                {"label":"R02", "x":9, "y":4}
+            ]
+        }
+    }
+}
diff --git a/keyboards/handwired/skakunm_dactyl/keymaps/default/keymap.c b/keyboards/handwired/skakunm_dactyl/keymaps/default/keymap.c
new file mode 100644
index 0000000000..0109b18c6c
--- /dev/null
+++ b/keyboards/handwired/skakunm_dactyl/keymaps/default/keymap.c
@@ -0,0 +1,41 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+};
+
+enum custom_keycodes {
+    LAYER0 = SAFE_RANGE,
+    LAYER1,
+    LAYER2,
+};
+
+ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_LAYER0] = LAYOUT_3x5_5(
+    KC_Q, KC_W, KC_E, KC_R, KC_T,                   KC_Y, KC_U, KC_I, KC_O, KC_P, 
+    KC_A, KC_S, KC_D, KC_F, KC_G,                   KC_H, KC_J, KC_K, KC_L, KC_QUOT, 
+    LSFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B,           KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), 
+                    KC_LCTL, KC_LALT,               KC_RALT, KC_RCTL,
+                    KC_BSPC, LT(2,KC_ESC), KC_DEL,  KC_TAB, LT(1,KC_ENT), KC_SPC),
+
+[_LAYER1] = LAYOUT_3x5_5(
+    KC_BSLS, KC_HOME, KC_UP, KC_END, KC_LBRC,       KC_RBRC, KC_P7, KC_P8, KC_P9, KC_LGUI, 
+    KC_PSLS, KC_LEFT, KC_DOWN, KC_RGHT, KC_LPRN,    KC_RPRN, KC_P4, KC_P5, KC_P6, KC_ENT, 
+    KC_LSFT, KC_SCLN, KC_QUOT, KC_MINS, KC_EQL,     KC_P0, KC_P1, KC_P2, KC_P3, KC_RSFT, 
+                            KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, 
+                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+[_LAYER2] = LAYOUT_3x5_5(
+    KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,              KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, 
+    KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC,       KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, 
+    KC_F1, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS, KC_QUOT, KC_QUES, KC_TRNS, KC_F12, 
+                            KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, 
+                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) 
+
+};
\ No newline at end of file
diff --git a/keyboards/handwired/skakunm_dactyl/readme.md b/keyboards/handwired/skakunm_dactyl/readme.md
new file mode 100644
index 0000000000..73174fbd1b
--- /dev/null
+++ b/keyboards/handwired/skakunm_dactyl/readme.md
@@ -0,0 +1,15 @@
+# skakunm dactyl
+
+![SkakunM-Dactyl](https://cdn.thingiverse.com/assets/98/52/da/e2/15/featured_preview_41db84f8-1ffb-4198-bd3f-ae2e5d112ec6.jpg)
+
+This is a variation of Dactyl, main idea is to have 3x5 + 5 keys arrangement, 5 keys for thumb and a minimal set of keys for other fingers. Also having 20 keys enables easy wiring of 4 rows (1 for thumb and 3 for other fingers) and 5 columns (5 buttons for thumb and 5 columns for other fingers). Hardware form factor is somewhat similar to the Moonlander, but smaller. It is designed to be 3D printed using a SLA resin 3D printer.
+
+* Keyboard Maintainer: [Marko Skakun](https://github.com/skakunm)
+* Hardware Supported: Arduino Pro Micro
+* Hardware Availability: [Files to print](https://www.thingiverse.com/thing:5461125)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/skakunm_dactyl:default
+    
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/handwired/skakunm_dactyl/rules.mk b/keyboards/handwired/skakunm_dactyl/rules.mk
new file mode 100644
index 0000000000..bd53948797
--- /dev/null
+++ b/keyboards/handwired/skakunm_dactyl/rules.mk
@@ -0,0 +1,20 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+AUDIO_ENABLE = no           # Audio output
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/handwired/skakunm_dactyl/skakunm_dactyl.c b/keyboards/handwired/skakunm_dactyl/skakunm_dactyl.c
new file mode 100644
index 0000000000..4105eea751
--- /dev/null
+++ b/keyboards/handwired/skakunm_dactyl/skakunm_dactyl.c
@@ -0,0 +1,4 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "skakunm_dactyl.h"
\ No newline at end of file
diff --git a/keyboards/handwired/skakunm_dactyl/skakunm_dactyl.h b/keyboards/handwired/skakunm_dactyl/skakunm_dactyl.h
new file mode 100644
index 0000000000..fa08dd3bb0
--- /dev/null
+++ b/keyboards/handwired/skakunm_dactyl/skakunm_dactyl.h
@@ -0,0 +1,25 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_3x5_5(\
+    L10, L11, L12, L13, L14,                      R14, R13, R12, R11, R10, \
+    L20, L21, L22, L23, L24,                      R24, R23, R22, R21, R20, \
+    L30, L31, L32, L33, L34,                      R34, R33, R32, R31, R30, \
+                        L00, L01,            R01, R00,                     \
+                        L04, L03, L02,  R02, R03, R04                      \
+    )\
+    {\
+        { L34, L33, L32, L31, L30 },     \
+        { L24, L23, L22, L21, L20 },     \
+        { L14, L13, L12, L11, L10 },     \
+        { L04, L03, L02, L01, L00 },     \
+\
+        { R34, R33, R32, R31, R30 },    \
+        { R24, R23, R22, R21, R20 },    \
+        { R14, R13, R12, R11, R10 },    \
+        { R04, R03, R02, R01, R00 },    \
+}