Improvements (#3)

* Start at Kludgy maltron style spacing

* Thumb and pinky tweaks

* Fix keyboard-z-offset problem

* Tweaks for a shorter-height version

* Add wall-thickness parameter

* Change hex-spacers to screw-inserts

* Adjust height

* Fix usb-cutout size and alignment

* Adjust teensy-holder

* Clean out junk

1 files changed, 0 insertions, 258 deletions

diff --git a/things/cura.ini b/things/cura.ini
deleted file mode 100644
index f166cb9..0000000
--- a/things/cura.ini
+++ /dev/null
@@ -1,258 +0,0 @@
-[profile]
-layer_height = 0.2
-wall_thickness = 1.6
-retraction_enable = False
-solid_layer_thickness = 0.6
-fill_density = 100
-print_speed = 40
-print_temperature = 215
-print_temperature2 = 0
-print_temperature3 = 0
-print_temperature4 = 0
-print_temperature5 = 0
-print_bed_temperature = 45
-support = Everywhere
-platform_adhesion = None
-support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
-ooze_shield = False
-filament_diameter = 1.75
-filament_diameter2 = 0
-filament_diameter3 = 0
-filament_diameter4 = 0
-filament_diameter5 = 0
-filament_flow = 100.0
-nozzle_size = 0.4
-retraction_speed = 40.0
-retraction_amount = 4.5
-retraction_dual_amount = 16.5
-retraction_min_travel = 1.5
-retraction_combing = All
-retraction_minimal_extrusion = 0.02
-retraction_hop = 0.0
-bottom_thickness = 0.3
-layer0_width_factor = 100
-object_sink = 0.0
-overlap_dual = 0.15
-travel_speed = 100
-bottom_layer_speed = 20
-infill_speed = 0.0
-solidarea_speed = 0.0
-inset0_speed = 0.0
-insetx_speed = 0.0
-cool_min_layer_time = 5
-fan_enabled = True
-skirt_line_count = 1
-skirt_gap = 3.0
-skirt_minimal_length = 150.0
-fan_full_height = 0.5
-fan_speed = 100
-fan_speed_max = 100
-cool_min_feedrate = 10
-cool_head_lift = False
-solid_top = True
-solid_bottom = True
-fill_overlap = 15
-perimeter_before_infill = False
-support_type = Grid
-support_angle = 60
-support_fill_rate = 15
-support_xy_distance = 0.7
-support_z_distance = 0.15
-spiralize = False
-simple_mode = False
-brim_line_count = 20
-raft_margin = 5.0
-raft_line_spacing = 3.0
-raft_base_thickness = 0.3
-raft_base_linewidth = 1.0
-raft_interface_thickness = 0.27
-raft_interface_linewidth = 0.4
-raft_airgap_all = 0.0
-raft_airgap = 0.22
-raft_surface_layers = 2
-raft_surface_thickness = 0.27
-raft_surface_linewidth = 0.4
-fix_horrible_union_all_type_a = True
-fix_horrible_union_all_type_b = False
-fix_horrible_use_open_bits = False
-fix_horrible_extensive_stitching = False
-plugin_config = 
-object_center_x = -1
-object_center_y = -1
-
-[alterations]
-start.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M109 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M82        ;set extruder to absolute mode
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	G92 E0                  ;zero the extruded length
-	G1 F200 E3              ;extrude 3mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end.gcode = ;End GCode
-	M104 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start2.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end2.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start3.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T2                      ;Switch to the 3rd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end3.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start4.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T3                      ;Switch to the 4th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T2                      ;Switch to the 3rd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end4.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M104 T3 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-support_start.gcode = 
-support_end.gcode = 
-cool_start.gcode = 
-cool_end.gcode = 
-replace.csv = 
-preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added before the T(n)
-postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added after the T(n)
-