path: root/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_usbdcd.h

/*
** ###################################################################
**     Compilers:           Keil ARM C/C++ Compiler
**                          Freescale C/C++ for Embedded ARM
**                          GNU C Compiler
**                          IAR ANSI C/C++ Compiler for ARM
**
**     Reference manual:    K64P144M120SF5RM, Rev.2, January 2014
**     Version:             rev. 2.5, 2014-02-10
**     Build:               b140604
**
**     Abstract:
**         Extension to the CMSIS register access layer header.
**
**     Copyright (c) 2014 Freescale Semiconductor, Inc.
**     All rights reserved.
**
**     Redistribution and use in source and binary forms, with or without modification,
**     are permitted provided that the following conditions are met:
**
**     o Redistributions of source code must retain the above copyright notice, this list
**       of conditions and the following disclaimer.
**
**     o Redistributions in binary form must reproduce the above copyright notice, this
**       list of conditions and the following disclaimer in the documentation and/or
**       other materials provided with the distribution.
**
**     o Neither the name of Freescale Semiconductor, Inc. nor the names of its
**       contributors may be used to endorse or promote products derived from this
**       software without specific prior written permission.
**
**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
**     http:                 www.freescale.com
**     mail:                 support@freescale.com
**
**     Revisions:
**     - rev. 1.0 (2013-08-12)
**         Initial version.
**     - rev. 2.0 (2013-10-29)
**         Register accessor macros added to the memory map.
**         Symbols for Processor Expert memory map compatibility added to the memory map.
**         Startup file for gcc has been updated according to CMSIS 3.2.
**         System initialization updated.
**         MCG - registers updated.
**         PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
**     - rev. 2.1 (2013-10-30)
**         Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
**     - rev. 2.2 (2013-12-09)
**         DMA - EARS register removed.
**         AIPS0, AIPS1 - MPRA register updated.
**     - rev. 2.3 (2014-01-24)
**         Update according to reference manual rev. 2
**         ENET, MCG, MCM, SIM, USB - registers updated
**     - rev. 2.4 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**     - rev. 2.5 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**         Module access macro module_BASES replaced by module_BASE_PTRS.
**
** ###################################################################
*/

/*
 * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
 *
 * This file was generated automatically and any changes may be lost.
 */
#ifndef __HW_USBDCD_REGISTERS_H__
#define __HW_USBDCD_REGISTERS_H__

#include "MK64F12.h"
#include "fsl_bitaccess.h"

/*
 * MK64F12 USBDCD
 *
 * USB Device Charger Detection module
 *
 * Registers defined in this header file:
 * - HW_USBDCD_CONTROL - Control register
 * - HW_USBDCD_CLOCK - Clock register
 * - HW_USBDCD_STATUS - Status register
 * - HW_USBDCD_TIMER0 - TIMER0 register
 * - HW_USBDCD_TIMER1 - TIMER1 register
 * - HW_USBDCD_TIMER2_BC11 - TIMER2_BC11 register
 * - HW_USBDCD_TIMER2_BC12 - TIMER2_BC12 register
 *
 * - hw_usbdcd_t - Struct containing all module registers.
 */

#define HW_USBDCD_INSTANCE_COUNT (1U) /*!< Number of instances of the USBDCD module. */

/*******************************************************************************
 * HW_USBDCD_CONTROL - Control register
 ******************************************************************************/

/*!
 * @brief HW_USBDCD_CONTROL - Control register (RW)
 *
 * Reset value: 0x00010000U
 *
 * Contains the control and interrupt bit fields.
 */
typedef union _hw_usbdcd_control
{
    uint32_t U;
    struct _hw_usbdcd_control_bitfields
    {
        uint32_t IACK : 1;             /*!< [0] Interrupt Acknowledge */
        uint32_t RESERVED0 : 7;        /*!< [7:1]  */
        uint32_t IF : 1;               /*!< [8] Interrupt Flag */
        uint32_t RESERVED1 : 7;        /*!< [15:9]  */
        uint32_t IE : 1;               /*!< [16] Interrupt Enable */
        uint32_t BC12 : 1;             /*!< [17]  */
        uint32_t RESERVED2 : 6;        /*!< [23:18]  */
        uint32_t START : 1;            /*!< [24] Start Change Detection Sequence */
        uint32_t SR : 1;               /*!< [25] Software Reset */
        uint32_t RESERVED3 : 6;        /*!< [31:26]  */
    } B;
} hw_usbdcd_control_t;

/*!
 * @name Constants and macros for entire USBDCD_CONTROL register
 */
/*@{*/
#define HW_USBDCD_CONTROL_ADDR(x) ((x) + 0x0U)

#define HW_USBDCD_CONTROL(x)     (*(__IO hw_usbdcd_control_t *) HW_USBDCD_CONTROL_ADDR(x))
#define HW_USBDCD_CONTROL_RD(x)  (HW_USBDCD_CONTROL(x).U)
#define HW_USBDCD_CONTROL_WR(x, v) (HW_USBDCD_CONTROL(x).U = (v))
#define HW_USBDCD_CONTROL_SET(x, v) (HW_USBDCD_CONTROL_WR(x, HW_USBDCD_CONTROL_RD(x) |  (v)))
#define HW_USBDCD_CONTROL_CLR(x, v) (HW_USBDCD_CONTROL_WR(x, HW_USBDCD_CONTROL_RD(x) & ~(v)))
#define HW_USBDCD_CONTROL_TOG(x, v) (HW_USBDCD_CONTROL_WR(x, HW_USBDCD_CONTROL_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual USBDCD_CONTROL bitfields
 */

/*!
 * @name Register USBDCD_CONTROL, field IACK[0] (WORZ)
 *
 * Determines whether the interrupt is cleared.
 *
 * Values:
 * - 0 - Do not clear the interrupt.
 * - 1 - Clear the IF bit (interrupt flag).
 */
/*@{*/
#define BP_USBDCD_CONTROL_IACK (0U)        /*!< Bit position for USBDCD_CONTROL_IACK. */
#define BM_USBDCD_CONTROL_IACK (0x00000001U) /*!< Bit mask for USBDCD_CONTROL_IACK. */
#define BS_USBDCD_CONTROL_IACK (1U)        /*!< Bit field size in bits for USBDCD_CONTROL_IACK. */

/*! @brief Format value for bitfield USBDCD_CONTROL_IACK. */
#define BF_USBDCD_CONTROL_IACK(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_CONTROL_IACK) & BM_USBDCD_CONTROL_IACK)

/*! @brief Set the IACK field to a new value. */
#define BW_USBDCD_CONTROL_IACK(x, v) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_IACK) = (v))
/*@}*/

/*!
 * @name Register USBDCD_CONTROL, field IF[8] (RO)
 *
 * Determines whether an interrupt is pending.
 *
 * Values:
 * - 0 - No interrupt is pending.
 * - 1 - An interrupt is pending.
 */
/*@{*/
#define BP_USBDCD_CONTROL_IF (8U)          /*!< Bit position for USBDCD_CONTROL_IF. */
#define BM_USBDCD_CONTROL_IF (0x00000100U) /*!< Bit mask for USBDCD_CONTROL_IF. */
#define BS_USBDCD_CONTROL_IF (1U)          /*!< Bit field size in bits for USBDCD_CONTROL_IF. */

/*! @brief Read current value of the USBDCD_CONTROL_IF field. */
#define BR_USBDCD_CONTROL_IF(x) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_IF))
/*@}*/

/*!
 * @name Register USBDCD_CONTROL, field IE[16] (RW)
 *
 * Enables/disables interrupts to the system.
 *
 * Values:
 * - 0 - Disable interrupts to the system.
 * - 1 - Enable interrupts to the system.
 */
/*@{*/
#define BP_USBDCD_CONTROL_IE (16U)         /*!< Bit position for USBDCD_CONTROL_IE. */
#define BM_USBDCD_CONTROL_IE (0x00010000U) /*!< Bit mask for USBDCD_CONTROL_IE. */
#define BS_USBDCD_CONTROL_IE (1U)          /*!< Bit field size in bits for USBDCD_CONTROL_IE. */

/*! @brief Read current value of the USBDCD_CONTROL_IE field. */
#define BR_USBDCD_CONTROL_IE(x) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_IE))

/*! @brief Format value for bitfield USBDCD_CONTROL_IE. */
#define BF_USBDCD_CONTROL_IE(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_CONTROL_IE) & BM_USBDCD_CONTROL_IE)

/*! @brief Set the IE field to a new value. */
#define BW_USBDCD_CONTROL_IE(x, v) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_IE) = (v))
/*@}*/

/*!
 * @name Register USBDCD_CONTROL, field BC12[17] (RW)
 *
 * BC1.2 compatibility. This bit cannot be changed after start detection.
 *
 * Values:
 * - 0 - Compatible with BC1.1 (default)
 * - 1 - Compatible with BC1.2
 */
/*@{*/
#define BP_USBDCD_CONTROL_BC12 (17U)       /*!< Bit position for USBDCD_CONTROL_BC12. */
#define BM_USBDCD_CONTROL_BC12 (0x00020000U) /*!< Bit mask for USBDCD_CONTROL_BC12. */
#define BS_USBDCD_CONTROL_BC12 (1U)        /*!< Bit field size in bits for USBDCD_CONTROL_BC12. */

/*! @brief Read current value of the USBDCD_CONTROL_BC12 field. */
#define BR_USBDCD_CONTROL_BC12(x) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_BC12))

/*! @brief Format value for bitfield USBDCD_CONTROL_BC12. */
#define BF_USBDCD_CONTROL_BC12(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_CONTROL_BC12) & BM_USBDCD_CONTROL_BC12)

/*! @brief Set the BC12 field to a new value. */
#define BW_USBDCD_CONTROL_BC12(x, v) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_BC12) = (v))
/*@}*/

/*!
 * @name Register USBDCD_CONTROL, field START[24] (WORZ)
 *
 * Determines whether the charger detection sequence is initiated.
 *
 * Values:
 * - 0 - Do not start the sequence. Writes of this value have no effect.
 * - 1 - Initiate the charger detection sequence. If the sequence is already
 *     running, writes of this value have no effect.
 */
/*@{*/
#define BP_USBDCD_CONTROL_START (24U)      /*!< Bit position for USBDCD_CONTROL_START. */
#define BM_USBDCD_CONTROL_START (0x01000000U) /*!< Bit mask for USBDCD_CONTROL_START. */
#define BS_USBDCD_CONTROL_START (1U)       /*!< Bit field size in bits for USBDCD_CONTROL_START. */

/*! @brief Format value for bitfield USBDCD_CONTROL_START. */
#define BF_USBDCD_CONTROL_START(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_CONTROL_START) & BM_USBDCD_CONTROL_START)

/*! @brief Set the START field to a new value. */
#define BW_USBDCD_CONTROL_START(x, v) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_START) = (v))
/*@}*/

/*!
 * @name Register USBDCD_CONTROL, field SR[25] (WORZ)
 *
 * Determines whether a software reset is performed.
 *
 * Values:
 * - 0 - Do not perform a software reset.
 * - 1 - Perform a software reset.
 */
/*@{*/
#define BP_USBDCD_CONTROL_SR (25U)         /*!< Bit position for USBDCD_CONTROL_SR. */
#define BM_USBDCD_CONTROL_SR (0x02000000U) /*!< Bit mask for USBDCD_CONTROL_SR. */
#define BS_USBDCD_CONTROL_SR (1U)          /*!< Bit field size in bits for USBDCD_CONTROL_SR. */

/*! @brief Format value for bitfield USBDCD_CONTROL_SR. */
#define BF_USBDCD_CONTROL_SR(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_CONTROL_SR) & BM_USBDCD_CONTROL_SR)

/*! @brief Set the SR field to a new value. */
#define BW_USBDCD_CONTROL_SR(x, v) (BITBAND_ACCESS32(HW_USBDCD_CONTROL_ADDR(x), BP_USBDCD_CONTROL_SR) = (v))
/*@}*/

/*******************************************************************************
 * HW_USBDCD_CLOCK - Clock register
 ******************************************************************************/

/*!
 * @brief HW_USBDCD_CLOCK - Clock register (RW)
 *
 * Reset value: 0x000000C1U
 */
typedef union _hw_usbdcd_clock
{
    uint32_t U;
    struct _hw_usbdcd_clock_bitfields
    {
        uint32_t CLOCK_UNIT : 1;       /*!< [0] Unit of Measurement Encoding for
                                        * Clock Speed */
        uint32_t RESERVED0 : 1;        /*!< [1]  */
        uint32_t CLOCK_SPEED : 10;     /*!< [11:2] Numerical Value of Clock Speed
                                        * in Binary */
        uint32_t RESERVED1 : 20;       /*!< [31:12]  */
    } B;
} hw_usbdcd_clock_t;

/*!
 * @name Constants and macros for entire USBDCD_CLOCK register
 */
/*@{*/
#define HW_USBDCD_CLOCK_ADDR(x)  ((x) + 0x4U)

#define HW_USBDCD_CLOCK(x)       (*(__IO hw_usbdcd_clock_t *) HW_USBDCD_CLOCK_ADDR(x))
#define HW_USBDCD_CLOCK_RD(x)    (HW_USBDCD_CLOCK(x).U)
#define HW_USBDCD_CLOCK_WR(x, v) (HW_USBDCD_CLOCK(x).U = (v))
#define HW_USBDCD_CLOCK_SET(x, v) (HW_USBDCD_CLOCK_WR(x, HW_USBDCD_CLOCK_RD(x) |  (v)))
#define HW_USBDCD_CLOCK_CLR(x, v) (HW_USBDCD_CLOCK_WR(x, HW_USBDCD_CLOCK_RD(x) & ~(v)))
#define HW_USBDCD_CLOCK_TOG(x, v) (HW_USBDCD_CLOCK_WR(x, HW_USBDCD_CLOCK_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual USBDCD_CLOCK bitfields
 */

/*!
 * @name Register USBDCD_CLOCK, field CLOCK_UNIT[0] (RW)
 *
 * Specifies the unit of measure for the clock speed.
 *
 * Values:
 * - 0 - kHz Speed (between 1 kHz and 1023 kHz)
 * - 1 - MHz Speed (between 1 MHz and 1023 MHz)
 */
/*@{*/
#define BP_USBDCD_CLOCK_CLOCK_UNIT (0U)    /*!< Bit position for USBDCD_CLOCK_CLOCK_UNIT. */
#define BM_USBDCD_CLOCK_CLOCK_UNIT (0x00000001U) /*!< Bit mask for USBDCD_CLOCK_CLOCK_UNIT. */
#define BS_USBDCD_CLOCK_CLOCK_UNIT (1U)    /*!< Bit field size in bits for USBDCD_CLOCK_CLOCK_UNIT. */

/*! @brief Read current value of the USBDCD_CLOCK_CLOCK_UNIT field. */
#define BR_USBDCD_CLOCK_CLOCK_UNIT(x) (BITBAND_ACCESS32(HW_USBDCD_CLOCK_ADDR(x), BP_USBDCD_CLOCK_CLOCK_UNIT))

/*! @brief Format value for bitfield USBDCD_CLOCK_CLOCK_UNIT. */
#define BF_USBDCD_CLOCK_CLOCK_UNIT(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_CLOCK_CLOCK_UNIT) & BM_USBDCD_CLOCK_CLOCK_UNIT)

/*! @brief Set the CLOCK_UNIT field to a new value. */
#define BW_USBDCD_CLOCK_CLOCK_UNIT(x, v) (BITBAND_ACCESS32(HW_USBDCD_CLOCK_ADDR(x), BP_USBDCD_CLOCK_CLOCK_UNIT) = (v))
/*@}*/

/*!
 * @name Register USBDCD_CLOCK, field CLOCK_SPEED[11:2] (RW)
 *
 * The unit of measure is programmed in CLOCK_UNIT. The valid range is from 1 to
 * 1023 when clock unit is MHz and 4 to 1023 when clock unit is kHz. Examples
 * with CLOCK_UNIT = 1: For 48 MHz: 0b00_0011_0000 (48) (Default) For 24 MHz:
 * 0b00_0001_1000 (24) Examples with CLOCK_UNIT = 0: For 100 kHz: 0b00_0110_0100 (100)
 * For 500 kHz: 0b01_1111_0100 (500)
 */
/*@{*/
#define BP_USBDCD_CLOCK_CLOCK_SPEED (2U)   /*!< Bit position for USBDCD_CLOCK_CLOCK_SPEED. */
#define BM_USBDCD_CLOCK_CLOCK_SPEED (0x00000FFCU) /*!< Bit mask for USBDCD_CLOCK_CLOCK_SPEED. */
#define BS_USBDCD_CLOCK_CLOCK_SPEED (10U)  /*!< Bit field size in bits for USBDCD_CLOCK_CLOCK_SPEED. */

/*! @brief Read current value of the USBDCD_CLOCK_CLOCK_SPEED field. */
#define BR_USBDCD_CLOCK_CLOCK_SPEED(x) (HW_USBDCD_CLOCK(x).B.CLOCK_SPEED)

/*! @brief Format value for bitfield USBDCD_CLOCK_CLOCK_SPEED. */
#define BF_USBDCD_CLOCK_CLOCK_SPEED(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_CLOCK_CLOCK_SPEED) & BM_USBDCD_CLOCK_CLOCK_SPEED)

/*! @brief Set the CLOCK_SPEED field to a new value. */
#define BW_USBDCD_CLOCK_CLOCK_SPEED(x, v) (HW_USBDCD_CLOCK_WR(x, (HW_USBDCD_CLOCK_RD(x) & ~BM_USBDCD_CLOCK_CLOCK_SPEED) | BF_USBDCD_CLOCK_CLOCK_SPEED(v)))
/*@}*/

/*******************************************************************************
 * HW_USBDCD_STATUS - Status register
 ******************************************************************************/

/*!
 * @brief HW_USBDCD_STATUS - Status register (RO)
 *
 * Reset value: 0x00000000U
 *
 * Provides the current state of the module for system software monitoring.
 */
typedef union _hw_usbdcd_status
{
    uint32_t U;
    struct _hw_usbdcd_status_bitfields
    {
        uint32_t RESERVED0 : 16;       /*!< [15:0]  */
        uint32_t SEQ_RES : 2;          /*!< [17:16] Charger Detection Sequence Results
                                        * */
        uint32_t SEQ_STAT : 2;         /*!< [19:18] Charger Detection Sequence Status
                                        * */
        uint32_t ERR : 1;              /*!< [20] Error Flag */
        uint32_t TO : 1;               /*!< [21] Timeout Flag */
        uint32_t ACTIVE : 1;           /*!< [22] Active Status Indicator */
        uint32_t RESERVED1 : 9;        /*!< [31:23]  */
    } B;
} hw_usbdcd_status_t;

/*!
 * @name Constants and macros for entire USBDCD_STATUS register
 */
/*@{*/
#define HW_USBDCD_STATUS_ADDR(x) ((x) + 0x8U)

#define HW_USBDCD_STATUS(x)      (*(__I hw_usbdcd_status_t *) HW_USBDCD_STATUS_ADDR(x))
#define HW_USBDCD_STATUS_RD(x)   (HW_USBDCD_STATUS(x).U)
/*@}*/

/*
 * Constants & macros for individual USBDCD_STATUS bitfields
 */

/*!
 * @name Register USBDCD_STATUS, field SEQ_RES[17:16] (RO)
 *
 * Reports how the charger detection is attached.
 *
 * Values:
 * - 00 - No results to report.
 * - 01 - Attached to a standard host. Must comply with USB 2.0 by drawing only
 *     2.5 mA (max) until connected.
 * - 10 - Attached to a charging port. The exact meaning depends on bit 18: 0:
 *     Attached to either a charging host or a dedicated charger. The charger type
 *     detection has not completed. 1: Attached to a charging host. The charger
 *     type detection has completed.
 * - 11 - Attached to a dedicated charger.
 */
/*@{*/
#define BP_USBDCD_STATUS_SEQ_RES (16U)     /*!< Bit position for USBDCD_STATUS_SEQ_RES. */
#define BM_USBDCD_STATUS_SEQ_RES (0x00030000U) /*!< Bit mask for USBDCD_STATUS_SEQ_RES. */
#define BS_USBDCD_STATUS_SEQ_RES (2U)      /*!< Bit field size in bits for USBDCD_STATUS_SEQ_RES. */

/*! @brief Read current value of the USBDCD_STATUS_SEQ_RES field. */
#define BR_USBDCD_STATUS_SEQ_RES(x) (HW_USBDCD_STATUS(x).B.SEQ_RES)
/*@}*/

/*!
 * @name Register USBDCD_STATUS, field SEQ_STAT[19:18] (RO)
 *
 * Indicates the status of the charger detection sequence.
 *
 * Values:
 * - 00 - The module is either not enabled, or the module is enabled but the
 *     data pins have not yet been detected.
 * - 01 - Data pin contact detection is complete.
 * - 10 - Charging port detection is complete.
 * - 11 - Charger type detection is complete.
 */
/*@{*/
#define BP_USBDCD_STATUS_SEQ_STAT (18U)    /*!< Bit position for USBDCD_STATUS_SEQ_STAT. */
#define BM_USBDCD_STATUS_SEQ_STAT (0x000C0000U) /*!< Bit mask for USBDCD_STATUS_SEQ_STAT. */
#define BS_USBDCD_STATUS_SEQ_STAT (2U)     /*!< Bit field size in bits for USBDCD_STATUS_SEQ_STAT. */

/*! @brief Read current value of the USBDCD_STATUS_SEQ_STAT field. */
#define BR_USBDCD_STATUS_SEQ_STAT(x) (HW_USBDCD_STATUS(x).B.SEQ_STAT)
/*@}*/

/*!
 * @name Register USBDCD_STATUS, field ERR[20] (RO)
 *
 * Indicates whether there is an error in the detection sequence.
 *
 * Values:
 * - 0 - No sequence errors.
 * - 1 - Error in the detection sequence. See the SEQ_STAT field to determine
 *     the phase in which the error occurred.
 */
/*@{*/
#define BP_USBDCD_STATUS_ERR (20U)         /*!< Bit position for USBDCD_STATUS_ERR. */
#define BM_USBDCD_STATUS_ERR (0x00100000U) /*!< Bit mask for USBDCD_STATUS_ERR. */
#define BS_USBDCD_STATUS_ERR (1U)          /*!< Bit field size in bits for USBDCD_STATUS_ERR. */

/*! @brief Read current value of the USBDCD_STATUS_ERR field. */
#define BR_USBDCD_STATUS_ERR(x) (BITBAND_ACCESS32(HW_USBDCD_STATUS_ADDR(x), BP_USBDCD_STATUS_ERR))
/*@}*/

/*!
 * @name Register USBDCD_STATUS, field TO[21] (RO)
 *
 * Indicates whether the detection sequence has passed the timeout threshhold.
 *
 * Values:
 * - 0 - The detection sequence has not been running for over 1 s.
 * - 1 - It has been over 1 s since the data pin contact was detected and
 *     debounced.
 */
/*@{*/
#define BP_USBDCD_STATUS_TO  (21U)         /*!< Bit position for USBDCD_STATUS_TO. */
#define BM_USBDCD_STATUS_TO  (0x00200000U) /*!< Bit mask for USBDCD_STATUS_TO. */
#define BS_USBDCD_STATUS_TO  (1U)          /*!< Bit field size in bits for USBDCD_STATUS_TO. */

/*! @brief Read current value of the USBDCD_STATUS_TO field. */
#define BR_USBDCD_STATUS_TO(x) (BITBAND_ACCESS32(HW_USBDCD_STATUS_ADDR(x), BP_USBDCD_STATUS_TO))
/*@}*/

/*!
 * @name Register USBDCD_STATUS, field ACTIVE[22] (RO)
 *
 * Indicates whether the sequence is running.
 *
 * Values:
 * - 0 - The sequence is not running.
 * - 1 - The sequence is running.
 */
/*@{*/
#define BP_USBDCD_STATUS_ACTIVE (22U)      /*!< Bit position for USBDCD_STATUS_ACTIVE. */
#define BM_USBDCD_STATUS_ACTIVE (0x00400000U) /*!< Bit mask for USBDCD_STATUS_ACTIVE. */
#define BS_USBDCD_STATUS_ACTIVE (1U)       /*!< Bit field size in bits for USBDCD_STATUS_ACTIVE. */

/*! @brief Read current value of the USBDCD_STATUS_ACTIVE field. */
#define BR_USBDCD_STATUS_ACTIVE(x) (BITBAND_ACCESS32(HW_USBDCD_STATUS_ADDR(x), BP_USBDCD_STATUS_ACTIVE))
/*@}*/

/*******************************************************************************
 * HW_USBDCD_TIMER0 - TIMER0 register
 ******************************************************************************/

/*!
 * @brief HW_USBDCD_TIMER0 - TIMER0 register (RW)
 *
 * Reset value: 0x00100000U
 *
 * TIMER0 has an TSEQ_INIT field that represents the system latency in ms.
 * Latency is measured from the time when VBUS goes active until the time system
 * software initiates charger detection sequence in USBDCD module. When software sets
 * the CONTROL[START] bit, the Unit Connection Timer (TUNITCON) is initialized
 * with the value of TSEQ_INIT. Valid values are 0-1023, however the USB Battery
 * Charging Specification requires the entire sequence, including TSEQ_INIT, to be
 * completed in 1s or less.
 */
typedef union _hw_usbdcd_timer0
{
    uint32_t U;
    struct _hw_usbdcd_timer0_bitfields
    {
        uint32_t TUNITCON : 12;        /*!< [11:0] Unit Connection Timer Elapse (in
                                        * ms) */
        uint32_t RESERVED0 : 4;        /*!< [15:12]  */
        uint32_t TSEQ_INIT : 10;       /*!< [25:16] Sequence Initiation Time */
        uint32_t RESERVED1 : 6;        /*!< [31:26]  */
    } B;
} hw_usbdcd_timer0_t;

/*!
 * @name Constants and macros for entire USBDCD_TIMER0 register
 */
/*@{*/
#define HW_USBDCD_TIMER0_ADDR(x) ((x) + 0x10U)

#define HW_USBDCD_TIMER0(x)      (*(__IO hw_usbdcd_timer0_t *) HW_USBDCD_TIMER0_ADDR(x))
#define HW_USBDCD_TIMER0_RD(x)   (HW_USBDCD_TIMER0(x).U)
#define HW_USBDCD_TIMER0_WR(x, v) (HW_USBDCD_TIMER0(x).U = (v))
#define HW_USBDCD_TIMER0_SET(x, v) (HW_USBDCD_TIMER0_WR(x, HW_USBDCD_TIMER0_RD(x) |  (v)))
#define HW_USBDCD_TIMER0_CLR(x, v) (HW_USBDCD_TIMER0_WR(x, HW_USBDCD_TIMER0_RD(x) & ~(v)))
#define HW_USBDCD_TIMER0_TOG(x, v) (HW_USBDCD_TIMER0_WR(x, HW_USBDCD_TIMER0_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual USBDCD_TIMER0 bitfields
 */

/*!
 * @name Register USBDCD_TIMER0, field TUNITCON[11:0] (RO)
 *
 * Displays the amount of elapsed time since the event of setting the START bit
 * plus the value of TSEQ_INIT. The timer is automatically initialized with the
 * value of TSEQ_INIT before starting to count. This timer enables compliance with
 * the maximum time allowed to connect T UNIT_CON under the USB Battery Charging
 * Specification. If the timer reaches the one second limit, the module triggers
 * an interrupt and sets the error flag STATUS[ERR]. The timer continues
 * counting throughout the charger detection sequence, even when control has been passed
 * to software. As long as the module is active, the timer continues to count
 * until it reaches the maximum value of 0xFFF (4095 ms). The timer does not
 * rollover to zero. A software reset clears the timer.
 */
/*@{*/
#define BP_USBDCD_TIMER0_TUNITCON (0U)     /*!< Bit position for USBDCD_TIMER0_TUNITCON. */
#define BM_USBDCD_TIMER0_TUNITCON (0x00000FFFU) /*!< Bit mask for USBDCD_TIMER0_TUNITCON. */
#define BS_USBDCD_TIMER0_TUNITCON (12U)    /*!< Bit field size in bits for USBDCD_TIMER0_TUNITCON. */

/*! @brief Read current value of the USBDCD_TIMER0_TUNITCON field. */
#define BR_USBDCD_TIMER0_TUNITCON(x) (HW_USBDCD_TIMER0(x).B.TUNITCON)
/*@}*/

/*!
 * @name Register USBDCD_TIMER0, field TSEQ_INIT[25:16] (RW)
 *
 * TSEQ_INIT represents the system latency (in ms) measured from the time VBUS
 * goes active to the time system software initiates the charger detection
 * sequence in the USBDCD module. When software sets the CONTROL[START] bit, the Unit
 * Connection Timer (TUNITCON) is initialized with the value of TSEQ_INIT. Valid
 * values are 0-1023, but the USB Battery Charging Specification requires the
 * entire sequence, including TSEQ_INIT, to be completed in 1s or less.
 */
/*@{*/
#define BP_USBDCD_TIMER0_TSEQ_INIT (16U)   /*!< Bit position for USBDCD_TIMER0_TSEQ_INIT. */
#define BM_USBDCD_TIMER0_TSEQ_INIT (0x03FF0000U) /*!< Bit mask for USBDCD_TIMER0_TSEQ_INIT. */
#define BS_USBDCD_TIMER0_TSEQ_INIT (10U)   /*!< Bit field size in bits for USBDCD_TIMER0_TSEQ_INIT. */

/*! @brief Read current value of the USBDCD_TIMER0_TSEQ_INIT field. */
#define BR_USBDCD_TIMER0_TSEQ_INIT(x) (HW_USBDCD_TIMER0(x).B.TSEQ_INIT)

/*! @brief Format value for bitfield USBDCD_TIMER0_TSEQ_INIT. */
#define BF_USBDCD_TIMER0_TSEQ_INIT(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_TIMER0_TSEQ_INIT) & BM_USBDCD_TIMER0_TSEQ_INIT)

/*! @brief Set the TSEQ_INIT field to a new value. */
#define BW_USBDCD_TIMER0_TSEQ_INIT(x, v) (HW_USBDCD_TIMER0_WR(x, (HW_USBDCD_TIMER0_RD(x) & ~BM_USBDCD_TIMER0_TSEQ_INIT) | BF_USBDCD_TIMER0_TSEQ_INIT(v)))
/*@}*/

/*******************************************************************************
 * HW_USBDCD_TIMER1 - TIMER1 register
 ******************************************************************************/

/*!
 * @brief HW_USBDCD_TIMER1 - TIMER1 register (RW)
 *
 * Reset value: 0x000A0028U
 *
 * TIMER1 contains timing parameters. Note that register values can be written
 * that are not compliant with the USB Battery Charging Specification, so care
 * should be taken when overwriting the default values.
 */
typedef union _hw_usbdcd_timer1
{
    uint32_t U;
    struct _hw_usbdcd_timer1_bitfields
    {
        uint32_t TVDPSRC_ON : 10;      /*!< [9:0] Time Period Comparator Enabled */
        uint32_t RESERVED0 : 6;        /*!< [15:10]  */
        uint32_t TDCD_DBNC : 10;       /*!< [25:16] Time Period to Debounce D+
                                        * Signal */
        uint32_t RESERVED1 : 6;        /*!< [31:26]  */
    } B;
} hw_usbdcd_timer1_t;

/*!
 * @name Constants and macros for entire USBDCD_TIMER1 register
 */
/*@{*/
#define HW_USBDCD_TIMER1_ADDR(x) ((x) + 0x14U)

#define HW_USBDCD_TIMER1(x)      (*(__IO hw_usbdcd_timer1_t *) HW_USBDCD_TIMER1_ADDR(x))
#define HW_USBDCD_TIMER1_RD(x)   (HW_USBDCD_TIMER1(x).U)
#define HW_USBDCD_TIMER1_WR(x, v) (HW_USBDCD_TIMER1(x).U = (v))
#define HW_USBDCD_TIMER1_SET(x, v) (HW_USBDCD_TIMER1_WR(x, HW_USBDCD_TIMER1_RD(x) |  (v)))
#define HW_USBDCD_TIMER1_CLR(x, v) (HW_USBDCD_TIMER1_WR(x, HW_USBDCD_TIMER1_RD(x) & ~(v)))
#define HW_USBDCD_TIMER1_TOG(x, v) (HW_USBDCD_TIMER1_WR(x, HW_USBDCD_TIMER1_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual USBDCD_TIMER1 bitfields
 */

/*!
 * @name Register USBDCD_TIMER1, field TVDPSRC_ON[9:0] (RW)
 *
 * This timing parameter is used after detection of the data pin. See "Charging
 * Port Detection". Valid values are 1-1023, but the USB Battery Charging
 * Specification requires a minimum value of 40 ms.
 */
/*@{*/
#define BP_USBDCD_TIMER1_TVDPSRC_ON (0U)   /*!< Bit position for USBDCD_TIMER1_TVDPSRC_ON. */
#define BM_USBDCD_TIMER1_TVDPSRC_ON (0x000003FFU) /*!< Bit mask for USBDCD_TIMER1_TVDPSRC_ON. */
#define BS_USBDCD_TIMER1_TVDPSRC_ON (10U)  /*!< Bit field size in bits for USBDCD_TIMER1_TVDPSRC_ON. */

/*! @brief Read current value of the USBDCD_TIMER1_TVDPSRC_ON field. */
#define BR_USBDCD_TIMER1_TVDPSRC_ON(x) (HW_USBDCD_TIMER1(x).B.TVDPSRC_ON)

/*! @brief Format value for bitfield USBDCD_TIMER1_TVDPSRC_ON. */
#define BF_USBDCD_TIMER1_TVDPSRC_ON(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_TIMER1_TVDPSRC_ON) & BM_USBDCD_TIMER1_TVDPSRC_ON)

/*! @brief Set the TVDPSRC_ON field to a new value. */
#define BW_USBDCD_TIMER1_TVDPSRC_ON(x, v) (HW_USBDCD_TIMER1_WR(x, (HW_USBDCD_TIMER1_RD(x) & ~BM_USBDCD_TIMER1_TVDPSRC_ON) | BF_USBDCD_TIMER1_TVDPSRC_ON(v)))
/*@}*/

/*!
 * @name Register USBDCD_TIMER1, field TDCD_DBNC[25:16] (RW)
 *
 * Sets the time period (ms) to debounce the D+ signal during the data pin
 * contact detection phase. See "Debouncing the data pin contact" Valid values are
 * 1-1023, but the USB Battery Charging Specification requires a minimum value of 10
 * ms.
 */
/*@{*/
#define BP_USBDCD_TIMER1_TDCD_DBNC (16U)   /*!< Bit position for USBDCD_TIMER1_TDCD_DBNC. */
#define BM_USBDCD_TIMER1_TDCD_DBNC (0x03FF0000U) /*!< Bit mask for USBDCD_TIMER1_TDCD_DBNC. */
#define BS_USBDCD_TIMER1_TDCD_DBNC (10U)   /*!< Bit field size in bits for USBDCD_TIMER1_TDCD_DBNC. */

/*! @brief Read current value of the USBDCD_TIMER1_TDCD_DBNC field. */
#define BR_USBDCD_TIMER1_TDCD_DBNC(x) (HW_USBDCD_TIMER1(x).B.TDCD_DBNC)

/*! @brief Format value for bitfield USBDCD_TIMER1_TDCD_DBNC. */
#define BF_USBDCD_TIMER1_TDCD_DBNC(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_TIMER1_TDCD_DBNC) & BM_USBDCD_TIMER1_TDCD_DBNC)

/*! @brief Set the TDCD_DBNC field to a new value. */
#define BW_USBDCD_TIMER1_TDCD_DBNC(x, v) (HW_USBDCD_TIMER1_WR(x, (HW_USBDCD_TIMER1_RD(x) & ~BM_USBDCD_TIMER1_TDCD_DBNC) | BF_USBDCD_TIMER1_TDCD_DBNC(v)))
/*@}*/

/*******************************************************************************
 * HW_USBDCD_TIMER2_BC11 - TIMER2_BC11 register
 ******************************************************************************/

/*!
 * @brief HW_USBDCD_TIMER2_BC11 - TIMER2_BC11 register (RW)
 *
 * Reset value: 0x00280001U
 *
 * TIMER2_BC11 contains timing parameters for USB Battery Charging
 * Specification, v1.1. Register values can be written that are not compliant with the USB
 * Battery Charging Specification, so care should be taken when overwriting the
 * default values.
 */
typedef union _hw_usbdcd_timer2_bc11
{
    uint32_t U;
    struct _hw_usbdcd_timer2_bc11_bitfields
    {
        uint32_t CHECK_DM : 4;         /*!< [3:0] Time Before Check of D- Line */
        uint32_t RESERVED0 : 12;       /*!< [15:4]  */
        uint32_t TVDPSRC_CON : 10;     /*!< [25:16] Time Period Before Enabling
                                        * D+ Pullup */
        uint32_t RESERVED1 : 6;        /*!< [31:26]  */
    } B;
} hw_usbdcd_timer2_bc11_t;

/*!
 * @name Constants and macros for entire USBDCD_TIMER2_BC11 register
 */
/*@{*/
#define HW_USBDCD_TIMER2_BC11_ADDR(x) ((x) + 0x18U)

#define HW_USBDCD_TIMER2_BC11(x) (*(__IO hw_usbdcd_timer2_bc11_t *) HW_USBDCD_TIMER2_BC11_ADDR(x))
#define HW_USBDCD_TIMER2_BC11_RD(x) (HW_USBDCD_TIMER2_BC11(x).U)
#define HW_USBDCD_TIMER2_BC11_WR(x, v) (HW_USBDCD_TIMER2_BC11(x).U = (v))
#define HW_USBDCD_TIMER2_BC11_SET(x, v) (HW_USBDCD_TIMER2_BC11_WR(x, HW_USBDCD_TIMER2_BC11_RD(x) |  (v)))
#define HW_USBDCD_TIMER2_BC11_CLR(x, v) (HW_USBDCD_TIMER2_BC11_WR(x, HW_USBDCD_TIMER2_BC11_RD(x) & ~(v)))
#define HW_USBDCD_TIMER2_BC11_TOG(x, v) (HW_USBDCD_TIMER2_BC11_WR(x, HW_USBDCD_TIMER2_BC11_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual USBDCD_TIMER2_BC11 bitfields
 */

/*!
 * @name Register USBDCD_TIMER2_BC11, field CHECK_DM[3:0] (RW)
 *
 * Sets the amount of time (in ms) that the module waits after the device
 * connects to the USB bus until checking the state of the D- line to determine the
 * type of charging port. See "Charger Type Detection." Valid values are 1-15ms.
 */
/*@{*/
#define BP_USBDCD_TIMER2_BC11_CHECK_DM (0U) /*!< Bit position for USBDCD_TIMER2_BC11_CHECK_DM. */
#define BM_USBDCD_TIMER2_BC11_CHECK_DM (0x0000000FU) /*!< Bit mask for USBDCD_TIMER2_BC11_CHECK_DM. */
#define BS_USBDCD_TIMER2_BC11_CHECK_DM (4U) /*!< Bit field size in bits for USBDCD_TIMER2_BC11_CHECK_DM. */

/*! @brief Read current value of the USBDCD_TIMER2_BC11_CHECK_DM field. */
#define BR_USBDCD_TIMER2_BC11_CHECK_DM(x) (HW_USBDCD_TIMER2_BC11(x).B.CHECK_DM)

/*! @brief Format value for bitfield USBDCD_TIMER2_BC11_CHECK_DM. */
#define BF_USBDCD_TIMER2_BC11_CHECK_DM(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_TIMER2_BC11_CHECK_DM) & BM_USBDCD_TIMER2_BC11_CHECK_DM)

/*! @brief Set the CHECK_DM field to a new value. */
#define BW_USBDCD_TIMER2_BC11_CHECK_DM(x, v) (HW_USBDCD_TIMER2_BC11_WR(x, (HW_USBDCD_TIMER2_BC11_RD(x) & ~BM_USBDCD_TIMER2_BC11_CHECK_DM) | BF_USBDCD_TIMER2_BC11_CHECK_DM(v)))
/*@}*/

/*!
 * @name Register USBDCD_TIMER2_BC11, field TVDPSRC_CON[25:16] (RW)
 *
 * Sets the time period (ms) that the module waits after charging port detection
 * before system software must enable the D+ pullup to connect to the USB host.
 * Valid values are 1-1023, but the USB Battery Charging Specification requires a
 * minimum value of 40 ms.
 */
/*@{*/
#define BP_USBDCD_TIMER2_BC11_TVDPSRC_CON (16U) /*!< Bit position for USBDCD_TIMER2_BC11_TVDPSRC_CON. */
#define BM_USBDCD_TIMER2_BC11_TVDPSRC_CON (0x03FF0000U) /*!< Bit mask for USBDCD_TIMER2_BC11_TVDPSRC_CON. */
#define BS_USBDCD_TIMER2_BC11_TVDPSRC_CON (10U) /*!< Bit field size in bits for USBDCD_TIMER2_BC11_TVDPSRC_CON. */

/*! @brief Read current value of the USBDCD_TIMER2_BC11_TVDPSRC_CON field. */
#define BR_USBDCD_TIMER2_BC11_TVDPSRC_CON(x) (HW_USBDCD_TIMER2_BC11(x).B.TVDPSRC_CON)

/*! @brief Format value for bitfield USBDCD_TIMER2_BC11_TVDPSRC_CON. */
#define BF_USBDCD_TIMER2_BC11_TVDPSRC_CON(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_TIMER2_BC11_TVDPSRC_CON) & BM_USBDCD_TIMER2_BC11_TVDPSRC_CON)

/*! @brief Set the TVDPSRC_CON field to a new value. */
#define BW_USBDCD_TIMER2_BC11_TVDPSRC_CON(x, v) (HW_USBDCD_TIMER2_BC11_WR(x, (HW_USBDCD_TIMER2_BC11_RD(x) & ~BM_USBDCD_TIMER2_BC11_TVDPSRC_CON) | BF_USBDCD_TIMER2_BC11_TVDPSRC_CON(v)))
/*@}*/
/*******************************************************************************
 * HW_USBDCD_TIMER2_BC12 - TIMER2_BC12 register
 ******************************************************************************/

/*!
 * @brief HW_USBDCD_TIMER2_BC12 - TIMER2_BC12 register (RW)
 *
 * Reset value: 0x00010028U
 *
 * TIMER2_BC12 contains timing parameters for USB Battery Charging
 * Specification, v1.2. Register values can be written that are not compliant with the USB
 * Battery Charging Specification, so care should be taken when overwriting the
 * default values.
 */
typedef union _hw_usbdcd_timer2_bc12
{
    uint32_t U;
    struct _hw_usbdcd_timer2_bc12_bitfields
    {
        uint32_t TVDMSRC_ON : 10;      /*!< [9:0]  */
        uint32_t RESERVED0 : 6;        /*!< [15:10]  */
        uint32_t TWAIT_AFTER_PRD : 10; /*!< [25:16]  */
        uint32_t RESERVED1 : 6;        /*!< [31:26]  */
    } B;
} hw_usbdcd_timer2_bc12_t;

/*!
 * @name Constants and macros for entire USBDCD_TIMER2_BC12 register
 */
/*@{*/
#define HW_USBDCD_TIMER2_BC12_ADDR(x) ((x) + 0x18U)

#define HW_USBDCD_TIMER2_BC12(x) (*(__IO hw_usbdcd_timer2_bc12_t *) HW_USBDCD_TIMER2_BC12_ADDR(x))
#define HW_USBDCD_TIMER2_BC12_RD(x) (HW_USBDCD_TIMER2_BC12(x).U)
#define HW_USBDCD_TIMER2_BC12_WR(x, v) (HW_USBDCD_TIMER2_BC12(x).U = (v))
#define HW_USBDCD_TIMER2_BC12_SET(x, v) (HW_USBDCD_TIMER2_BC12_WR(x, HW_USBDCD_TIMER2_BC12_RD(x) |  (v)))
#define HW_USBDCD_TIMER2_BC12_CLR(x, v) (HW_USBDCD_TIMER2_BC12_WR(x, HW_USBDCD_TIMER2_BC12_RD(x) & ~(v)))
#define HW_USBDCD_TIMER2_BC12_TOG(x, v) (HW_USBDCD_TIMER2_BC12_WR(x, HW_USBDCD_TIMER2_BC12_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual USBDCD_TIMER2_BC12 bitfields
 */

/*!
 * @name Register USBDCD_TIMER2_BC12, field TVDMSRC_ON[9:0] (RW)
 *
 * Sets the amount of time (in ms) that the module enables the VDM_SRC. Valid
 * values are 0-40ms.
 */
/*@{*/
#define BP_USBDCD_TIMER2_BC12_TVDMSRC_ON (0U) /*!< Bit position for USBDCD_TIMER2_BC12_TVDMSRC_ON. */
#define BM_USBDCD_TIMER2_BC12_TVDMSRC_ON (0x000003FFU) /*!< Bit mask for USBDCD_TIMER2_BC12_TVDMSRC_ON. */
#define BS_USBDCD_TIMER2_BC12_TVDMSRC_ON (10U) /*!< Bit field size in bits for USBDCD_TIMER2_BC12_TVDMSRC_ON. */

/*! @brief Read current value of the USBDCD_TIMER2_BC12_TVDMSRC_ON field. */
#define BR_USBDCD_TIMER2_BC12_TVDMSRC_ON(x) (HW_USBDCD_TIMER2_BC12(x).B.TVDMSRC_ON)

/*! @brief Format value for bitfield USBDCD_TIMER2_BC12_TVDMSRC_ON. */
#define BF_USBDCD_TIMER2_BC12_TVDMSRC_ON(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_TIMER2_BC12_TVDMSRC_ON) & BM_USBDCD_TIMER2_BC12_TVDMSRC_ON)

/*! @brief Set the TVDMSRC_ON field to a new value. */
#define BW_USBDCD_TIMER2_BC12_TVDMSRC_ON(x, v) (HW_USBDCD_TIMER2_BC12_WR(x, (HW_USBDCD_TIMER2_BC12_RD(x) & ~BM_USBDCD_TIMER2_BC12_TVDMSRC_ON) | BF_USBDCD_TIMER2_BC12_TVDMSRC_ON(v)))
/*@}*/

/*!
 * @name Register USBDCD_TIMER2_BC12, field TWAIT_AFTER_PRD[25:16] (RW)
 *
 * Sets the amount of time (in ms) that the module waits after primary detection
 * before start to secondary detection. Valid values are 1-1023ms. Default is
 * 1ms.
 */
/*@{*/
#define BP_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD (16U) /*!< Bit position for USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD. */
#define BM_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD (0x03FF0000U) /*!< Bit mask for USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD. */
#define BS_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD (10U) /*!< Bit field size in bits for USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD. */

/*! @brief Read current value of the USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD field. */
#define BR_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD(x) (HW_USBDCD_TIMER2_BC12(x).B.TWAIT_AFTER_PRD)

/*! @brief Format value for bitfield USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD. */
#define BF_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD(v) ((uint32_t)((uint32_t)(v) << BP_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD) & BM_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD)

/*! @brief Set the TWAIT_AFTER_PRD field to a new value. */
#define BW_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD(x, v) (HW_USBDCD_TIMER2_BC12_WR(x, (HW_USBDCD_TIMER2_BC12_RD(x) & ~BM_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD) | BF_USBDCD_TIMER2_BC12_TWAIT_AFTER_PRD(v)))
/*@}*/

/*
** Start of section using anonymous unions
*/

#if defined(__ARMCC_VERSION)
  #pragma push
  #pragma anon_unions
#elif defined(__CWCC__)
  #pragma push
  #pragma cpp_extensions on
#elif defined(__GNUC__)
  /* anonymous unions are enabled by default */
#elif defined(__IAR_SYSTEMS_ICC__)
  #pragma language=extended
#else
  #error Not supported compiler type
#endif

/*******************************************************************************
 * hw_usbdcd_t - module struct
 ******************************************************************************/
/*!
 * @brief All USBDCD module registers.
 */
#pragma pack(1)
typedef struct _hw_usbdcd
{
    __IO hw_usbdcd_control_t CONTROL;      /*!< [0x0] Control register */
    __IO hw_usbdcd_clock_t CLOCK;          /*!< [0x4] Clock register */
    __I hw_usbdcd_status_t STATUS;         /*!< [0x8] Status register */
    uint8_t _reserved0[4];
    __IO hw_usbdcd_timer0_t TIMER0;        /*!< [0x10] TIMER0 register */
    __IO hw_usbdcd_timer1_t TIMER1;        /*!< [0x14] TIMER1 register */
    union {
        __IO hw_usbdcd_timer2_bc11_t TIMER2_BC11; /*!< [0x18] TIMER2_BC11 register */
        __IO hw_usbdcd_timer2_bc12_t TIMER2_BC12; /*!< [0x18] TIMER2_BC12 register */
    };
} hw_usbdcd_t;
#pragma pack()

/*! @brief Macro to access all USBDCD registers. */
/*! @param x USBDCD module instance base address. */
/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
 *     use the '&' operator, like <code>&HW_USBDCD(USBDCD_BASE)</code>. */
#define HW_USBDCD(x)   (*(hw_usbdcd_t *)(x))

/*
** End of section using anonymous unions
*/

#if defined(__ARMCC_VERSION)
  #pragma pop
#elif defined(__CWCC__)
  #pragma pop
#elif defined(__GNUC__)
  /* leave anonymous unions enabled */
#elif defined(__IAR_SYSTEMS_ICC__)
  #pragma language=default
#else
  #error Not supported compiler type
#endif

#endif /* __HW_USBDCD_REGISTERS_H__ */
/* EOF */