path: root/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_rcm.h

/*
** ###################################################################
**     Compilers:           Keil ARM C/C++ Compiler
**                          Freescale C/C++ for Embedded ARM
**                          GNU C Compiler
**                          IAR ANSI C/C++ Compiler for ARM
**
**     Reference manual:    K64P144M120SF5RM, Rev.2, January 2014
**     Version:             rev. 2.5, 2014-02-10
**     Build:               b140604
**
**     Abstract:
**         Extension to the CMSIS register access layer header.
**
**     Copyright (c) 2014 Freescale Semiconductor, Inc.
**     All rights reserved.
**
**     Redistribution and use in source and binary forms, with or without modification,
**     are permitted provided that the following conditions are met:
**
**     o Redistributions of source code must retain the above copyright notice, this list
**       of conditions and the following disclaimer.
**
**     o Redistributions in binary form must reproduce the above copyright notice, this
**       list of conditions and the following disclaimer in the documentation and/or
**       other materials provided with the distribution.
**
**     o Neither the name of Freescale Semiconductor, Inc. nor the names of its
**       contributors may be used to endorse or promote products derived from this
**       software without specific prior written permission.
**
**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
**     http:                 www.freescale.com
**     mail:                 support@freescale.com
**
**     Revisions:
**     - rev. 1.0 (2013-08-12)
**         Initial version.
**     - rev. 2.0 (2013-10-29)
**         Register accessor macros added to the memory map.
**         Symbols for Processor Expert memory map compatibility added to the memory map.
**         Startup file for gcc has been updated according to CMSIS 3.2.
**         System initialization updated.
**         MCG - registers updated.
**         PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
**     - rev. 2.1 (2013-10-30)
**         Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
**     - rev. 2.2 (2013-12-09)
**         DMA - EARS register removed.
**         AIPS0, AIPS1 - MPRA register updated.
**     - rev. 2.3 (2014-01-24)
**         Update according to reference manual rev. 2
**         ENET, MCG, MCM, SIM, USB - registers updated
**     - rev. 2.4 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**     - rev. 2.5 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**         Module access macro module_BASES replaced by module_BASE_PTRS.
**
** ###################################################################
*/

/*
 * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
 *
 * This file was generated automatically and any changes may be lost.
 */
#ifndef __HW_RCM_REGISTERS_H__
#define __HW_RCM_REGISTERS_H__

#include "MK64F12.h"
#include "fsl_bitaccess.h"

/*
 * MK64F12 RCM
 *
 * Reset Control Module
 *
 * Registers defined in this header file:
 * - HW_RCM_SRS0 - System Reset Status Register 0
 * - HW_RCM_SRS1 - System Reset Status Register 1
 * - HW_RCM_RPFC - Reset Pin Filter Control register
 * - HW_RCM_RPFW - Reset Pin Filter Width register
 * - HW_RCM_MR - Mode Register
 *
 * - hw_rcm_t - Struct containing all module registers.
 */

#define HW_RCM_INSTANCE_COUNT (1U) /*!< Number of instances of the RCM module. */

/*******************************************************************************
 * HW_RCM_SRS0 - System Reset Status Register 0
 ******************************************************************************/

/*!
 * @brief HW_RCM_SRS0 - System Reset Status Register 0 (RO)
 *
 * Reset value: 0x82U
 *
 * This register includes read-only status flags to indicate the source of the
 * most recent reset. The reset state of these bits depends on what caused the MCU
 * to reset. The reset value of this register depends on the reset source: POR
 * (including LVD) - 0x82 LVD (without POR) - 0x02 VLLS mode wakeup due to RESET
 * pin assertion - 0x41 VLLS mode wakeup due to other wakeup sources - 0x01 Other
 * reset - a bit is set if its corresponding reset source caused the reset
 */
typedef union _hw_rcm_srs0
{
    uint8_t U;
    struct _hw_rcm_srs0_bitfields
    {
        uint8_t WAKEUP : 1;            /*!< [0] Low Leakage Wakeup Reset */
        uint8_t LVD : 1;               /*!< [1] Low-Voltage Detect Reset */
        uint8_t LOC : 1;               /*!< [2] Loss-of-Clock Reset */
        uint8_t LOL : 1;               /*!< [3] Loss-of-Lock Reset */
        uint8_t RESERVED0 : 1;         /*!< [4]  */
        uint8_t WDOGb : 1;             /*!< [5] Watchdog */
        uint8_t PIN : 1;               /*!< [6] External Reset Pin */
        uint8_t POR : 1;               /*!< [7] Power-On Reset */
    } B;
} hw_rcm_srs0_t;

/*!
 * @name Constants and macros for entire RCM_SRS0 register
 */
/*@{*/
#define HW_RCM_SRS0_ADDR(x)      ((x) + 0x0U)

#define HW_RCM_SRS0(x)           (*(__I hw_rcm_srs0_t *) HW_RCM_SRS0_ADDR(x))
#define HW_RCM_SRS0_RD(x)        (HW_RCM_SRS0(x).U)
/*@}*/

/*
 * Constants & macros for individual RCM_SRS0 bitfields
 */

/*!
 * @name Register RCM_SRS0, field WAKEUP[0] (RO)
 *
 * Indicates a reset has been caused by an enabled LLWU module wakeup source
 * while the chip was in a low leakage mode. In LLS mode, the RESET pin is the only
 * wakeup source that can cause this reset. Any enabled wakeup source in a VLLSx
 * mode causes a reset. This bit is cleared by any reset except WAKEUP.
 *
 * Values:
 * - 0 - Reset not caused by LLWU module wakeup source
 * - 1 - Reset caused by LLWU module wakeup source
 */
/*@{*/
#define BP_RCM_SRS0_WAKEUP   (0U)          /*!< Bit position for RCM_SRS0_WAKEUP. */
#define BM_RCM_SRS0_WAKEUP   (0x01U)       /*!< Bit mask for RCM_SRS0_WAKEUP. */
#define BS_RCM_SRS0_WAKEUP   (1U)          /*!< Bit field size in bits for RCM_SRS0_WAKEUP. */

/*! @brief Read current value of the RCM_SRS0_WAKEUP field. */
#define BR_RCM_SRS0_WAKEUP(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_WAKEUP))
/*@}*/

/*!
 * @name Register RCM_SRS0, field LVD[1] (RO)
 *
 * If PMC_LVDSC1[LVDRE] is set and the supply drops below the LVD trip voltage,
 * an LVD reset occurs. This field is also set by POR.
 *
 * Values:
 * - 0 - Reset not caused by LVD trip or POR
 * - 1 - Reset caused by LVD trip or POR
 */
/*@{*/
#define BP_RCM_SRS0_LVD      (1U)          /*!< Bit position for RCM_SRS0_LVD. */
#define BM_RCM_SRS0_LVD      (0x02U)       /*!< Bit mask for RCM_SRS0_LVD. */
#define BS_RCM_SRS0_LVD      (1U)          /*!< Bit field size in bits for RCM_SRS0_LVD. */

/*! @brief Read current value of the RCM_SRS0_LVD field. */
#define BR_RCM_SRS0_LVD(x)   (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_LVD))
/*@}*/

/*!
 * @name Register RCM_SRS0, field LOC[2] (RO)
 *
 * Indicates a reset has been caused by a loss of external clock. The MCG clock
 * monitor must be enabled for a loss of clock to be detected. Refer to the
 * detailed MCG description for information on enabling the clock monitor.
 *
 * Values:
 * - 0 - Reset not caused by a loss of external clock.
 * - 1 - Reset caused by a loss of external clock.
 */
/*@{*/
#define BP_RCM_SRS0_LOC      (2U)          /*!< Bit position for RCM_SRS0_LOC. */
#define BM_RCM_SRS0_LOC      (0x04U)       /*!< Bit mask for RCM_SRS0_LOC. */
#define BS_RCM_SRS0_LOC      (1U)          /*!< Bit field size in bits for RCM_SRS0_LOC. */

/*! @brief Read current value of the RCM_SRS0_LOC field. */
#define BR_RCM_SRS0_LOC(x)   (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_LOC))
/*@}*/

/*!
 * @name Register RCM_SRS0, field LOL[3] (RO)
 *
 * Indicates a reset has been caused by a loss of lock in the MCG PLL. See the
 * MCG description for information on the loss-of-clock event.
 *
 * Values:
 * - 0 - Reset not caused by a loss of lock in the PLL
 * - 1 - Reset caused by a loss of lock in the PLL
 */
/*@{*/
#define BP_RCM_SRS0_LOL      (3U)          /*!< Bit position for RCM_SRS0_LOL. */
#define BM_RCM_SRS0_LOL      (0x08U)       /*!< Bit mask for RCM_SRS0_LOL. */
#define BS_RCM_SRS0_LOL      (1U)          /*!< Bit field size in bits for RCM_SRS0_LOL. */

/*! @brief Read current value of the RCM_SRS0_LOL field. */
#define BR_RCM_SRS0_LOL(x)   (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_LOL))
/*@}*/

/*!
 * @name Register RCM_SRS0, field WDOG[5] (RO)
 *
 * Indicates a reset has been caused by the watchdog timer Computer Operating
 * Properly (COP) timing out. This reset source can be blocked by disabling the COP
 * watchdog: write 00 to SIM_COPCTRL[COPT].
 *
 * Values:
 * - 0 - Reset not caused by watchdog timeout
 * - 1 - Reset caused by watchdog timeout
 */
/*@{*/
#define BP_RCM_SRS0_WDOG     (5U)          /*!< Bit position for RCM_SRS0_WDOG. */
#define BM_RCM_SRS0_WDOG     (0x20U)       /*!< Bit mask for RCM_SRS0_WDOG. */
#define BS_RCM_SRS0_WDOG     (1U)          /*!< Bit field size in bits for RCM_SRS0_WDOG. */

/*! @brief Read current value of the RCM_SRS0_WDOG field. */
#define BR_RCM_SRS0_WDOG(x)  (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_WDOG))
/*@}*/

/*!
 * @name Register RCM_SRS0, field PIN[6] (RO)
 *
 * Indicates a reset has been caused by an active-low level on the external
 * RESET pin.
 *
 * Values:
 * - 0 - Reset not caused by external reset pin
 * - 1 - Reset caused by external reset pin
 */
/*@{*/
#define BP_RCM_SRS0_PIN      (6U)          /*!< Bit position for RCM_SRS0_PIN. */
#define BM_RCM_SRS0_PIN      (0x40U)       /*!< Bit mask for RCM_SRS0_PIN. */
#define BS_RCM_SRS0_PIN      (1U)          /*!< Bit field size in bits for RCM_SRS0_PIN. */

/*! @brief Read current value of the RCM_SRS0_PIN field. */
#define BR_RCM_SRS0_PIN(x)   (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_PIN))
/*@}*/

/*!
 * @name Register RCM_SRS0, field POR[7] (RO)
 *
 * Indicates a reset has been caused by the power-on detection logic. Because
 * the internal supply voltage was ramping up at the time, the low-voltage reset
 * (LVD) status bit is also set to indicate that the reset occurred while the
 * internal supply was below the LVD threshold.
 *
 * Values:
 * - 0 - Reset not caused by POR
 * - 1 - Reset caused by POR
 */
/*@{*/
#define BP_RCM_SRS0_POR      (7U)          /*!< Bit position for RCM_SRS0_POR. */
#define BM_RCM_SRS0_POR      (0x80U)       /*!< Bit mask for RCM_SRS0_POR. */
#define BS_RCM_SRS0_POR      (1U)          /*!< Bit field size in bits for RCM_SRS0_POR. */

/*! @brief Read current value of the RCM_SRS0_POR field. */
#define BR_RCM_SRS0_POR(x)   (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_POR))
/*@}*/

/*******************************************************************************
 * HW_RCM_SRS1 - System Reset Status Register 1
 ******************************************************************************/

/*!
 * @brief HW_RCM_SRS1 - System Reset Status Register 1 (RO)
 *
 * Reset value: 0x00U
 *
 * This register includes read-only status flags to indicate the source of the
 * most recent reset. The reset state of these bits depends on what caused the MCU
 * to reset. The reset value of this register depends on the reset source: POR
 * (including LVD) - 0x00 LVD (without POR) - 0x00 VLLS mode wakeup - 0x00 Other
 * reset - a bit is set if its corresponding reset source caused the reset
 */
typedef union _hw_rcm_srs1
{
    uint8_t U;
    struct _hw_rcm_srs1_bitfields
    {
        uint8_t JTAG : 1;              /*!< [0] JTAG Generated Reset */
        uint8_t LOCKUP : 1;            /*!< [1] Core Lockup */
        uint8_t SW : 1;                /*!< [2] Software */
        uint8_t MDM_AP : 1;            /*!< [3] MDM-AP System Reset Request */
        uint8_t EZPT : 1;              /*!< [4] EzPort Reset */
        uint8_t SACKERR : 1;           /*!< [5] Stop Mode Acknowledge Error Reset */
        uint8_t RESERVED0 : 2;         /*!< [7:6]  */
    } B;
} hw_rcm_srs1_t;

/*!
 * @name Constants and macros for entire RCM_SRS1 register
 */
/*@{*/
#define HW_RCM_SRS1_ADDR(x)      ((x) + 0x1U)

#define HW_RCM_SRS1(x)           (*(__I hw_rcm_srs1_t *) HW_RCM_SRS1_ADDR(x))
#define HW_RCM_SRS1_RD(x)        (HW_RCM_SRS1(x).U)
/*@}*/

/*
 * Constants & macros for individual RCM_SRS1 bitfields
 */

/*!
 * @name Register RCM_SRS1, field JTAG[0] (RO)
 *
 * Indicates a reset has been caused by JTAG selection of certain IR codes:
 * EZPORT, EXTEST, HIGHZ, and CLAMP.
 *
 * Values:
 * - 0 - Reset not caused by JTAG
 * - 1 - Reset caused by JTAG
 */
/*@{*/
#define BP_RCM_SRS1_JTAG     (0U)          /*!< Bit position for RCM_SRS1_JTAG. */
#define BM_RCM_SRS1_JTAG     (0x01U)       /*!< Bit mask for RCM_SRS1_JTAG. */
#define BS_RCM_SRS1_JTAG     (1U)          /*!< Bit field size in bits for RCM_SRS1_JTAG. */

/*! @brief Read current value of the RCM_SRS1_JTAG field. */
#define BR_RCM_SRS1_JTAG(x)  (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_JTAG))
/*@}*/

/*!
 * @name Register RCM_SRS1, field LOCKUP[1] (RO)
 *
 * Indicates a reset has been caused by the ARM core indication of a LOCKUP
 * event.
 *
 * Values:
 * - 0 - Reset not caused by core LOCKUP event
 * - 1 - Reset caused by core LOCKUP event
 */
/*@{*/
#define BP_RCM_SRS1_LOCKUP   (1U)          /*!< Bit position for RCM_SRS1_LOCKUP. */
#define BM_RCM_SRS1_LOCKUP   (0x02U)       /*!< Bit mask for RCM_SRS1_LOCKUP. */
#define BS_RCM_SRS1_LOCKUP   (1U)          /*!< Bit field size in bits for RCM_SRS1_LOCKUP. */

/*! @brief Read current value of the RCM_SRS1_LOCKUP field. */
#define BR_RCM_SRS1_LOCKUP(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_LOCKUP))
/*@}*/

/*!
 * @name Register RCM_SRS1, field SW[2] (RO)
 *
 * Indicates a reset has been caused by software setting of SYSRESETREQ bit in
 * Application Interrupt and Reset Control Register in the ARM core.
 *
 * Values:
 * - 0 - Reset not caused by software setting of SYSRESETREQ bit
 * - 1 - Reset caused by software setting of SYSRESETREQ bit
 */
/*@{*/
#define BP_RCM_SRS1_SW       (2U)          /*!< Bit position for RCM_SRS1_SW. */
#define BM_RCM_SRS1_SW       (0x04U)       /*!< Bit mask for RCM_SRS1_SW. */
#define BS_RCM_SRS1_SW       (1U)          /*!< Bit field size in bits for RCM_SRS1_SW. */

/*! @brief Read current value of the RCM_SRS1_SW field. */
#define BR_RCM_SRS1_SW(x)    (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_SW))
/*@}*/

/*!
 * @name Register RCM_SRS1, field MDM_AP[3] (RO)
 *
 * Indicates a reset has been caused by the host debugger system setting of the
 * System Reset Request bit in the MDM-AP Control Register.
 *
 * Values:
 * - 0 - Reset not caused by host debugger system setting of the System Reset
 *     Request bit
 * - 1 - Reset caused by host debugger system setting of the System Reset
 *     Request bit
 */
/*@{*/
#define BP_RCM_SRS1_MDM_AP   (3U)          /*!< Bit position for RCM_SRS1_MDM_AP. */
#define BM_RCM_SRS1_MDM_AP   (0x08U)       /*!< Bit mask for RCM_SRS1_MDM_AP. */
#define BS_RCM_SRS1_MDM_AP   (1U)          /*!< Bit field size in bits for RCM_SRS1_MDM_AP. */

/*! @brief Read current value of the RCM_SRS1_MDM_AP field. */
#define BR_RCM_SRS1_MDM_AP(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_MDM_AP))
/*@}*/

/*!
 * @name Register RCM_SRS1, field EZPT[4] (RO)
 *
 * Indicates a reset has been caused by EzPort receiving the RESET command while
 * the device is in EzPort mode.
 *
 * Values:
 * - 0 - Reset not caused by EzPort receiving the RESET command while the device
 *     is in EzPort mode
 * - 1 - Reset caused by EzPort receiving the RESET command while the device is
 *     in EzPort mode
 */
/*@{*/
#define BP_RCM_SRS1_EZPT     (4U)          /*!< Bit position for RCM_SRS1_EZPT. */
#define BM_RCM_SRS1_EZPT     (0x10U)       /*!< Bit mask for RCM_SRS1_EZPT. */
#define BS_RCM_SRS1_EZPT     (1U)          /*!< Bit field size in bits for RCM_SRS1_EZPT. */

/*! @brief Read current value of the RCM_SRS1_EZPT field. */
#define BR_RCM_SRS1_EZPT(x)  (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_EZPT))
/*@}*/

/*!
 * @name Register RCM_SRS1, field SACKERR[5] (RO)
 *
 * Indicates that after an attempt to enter Stop mode, a reset has been caused
 * by a failure of one or more peripherals to acknowledge within approximately one
 * second to enter stop mode.
 *
 * Values:
 * - 0 - Reset not caused by peripheral failure to acknowledge attempt to enter
 *     stop mode
 * - 1 - Reset caused by peripheral failure to acknowledge attempt to enter stop
 *     mode
 */
/*@{*/
#define BP_RCM_SRS1_SACKERR  (5U)          /*!< Bit position for RCM_SRS1_SACKERR. */
#define BM_RCM_SRS1_SACKERR  (0x20U)       /*!< Bit mask for RCM_SRS1_SACKERR. */
#define BS_RCM_SRS1_SACKERR  (1U)          /*!< Bit field size in bits for RCM_SRS1_SACKERR. */

/*! @brief Read current value of the RCM_SRS1_SACKERR field. */
#define BR_RCM_SRS1_SACKERR(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_SACKERR))
/*@}*/

/*******************************************************************************
 * HW_RCM_RPFC - Reset Pin Filter Control register
 ******************************************************************************/

/*!
 * @brief HW_RCM_RPFC - Reset Pin Filter Control register (RW)
 *
 * Reset value: 0x00U
 *
 * The reset values of bits 2-0 are for Chip POR only. They are unaffected by
 * other reset types. The bus clock filter is reset when disabled or when entering
 * stop mode. The LPO filter is reset when disabled or when entering any low
 * leakage stop mode .
 */
typedef union _hw_rcm_rpfc
{
    uint8_t U;
    struct _hw_rcm_rpfc_bitfields
    {
        uint8_t RSTFLTSRW : 2;         /*!< [1:0] Reset Pin Filter Select in Run and
                                        * Wait Modes */
        uint8_t RSTFLTSS : 1;          /*!< [2] Reset Pin Filter Select in Stop Mode */
        uint8_t RESERVED0 : 5;         /*!< [7:3]  */
    } B;
} hw_rcm_rpfc_t;

/*!
 * @name Constants and macros for entire RCM_RPFC register
 */
/*@{*/
#define HW_RCM_RPFC_ADDR(x)      ((x) + 0x4U)

#define HW_RCM_RPFC(x)           (*(__IO hw_rcm_rpfc_t *) HW_RCM_RPFC_ADDR(x))
#define HW_RCM_RPFC_RD(x)        (HW_RCM_RPFC(x).U)
#define HW_RCM_RPFC_WR(x, v)     (HW_RCM_RPFC(x).U = (v))
#define HW_RCM_RPFC_SET(x, v)    (HW_RCM_RPFC_WR(x, HW_RCM_RPFC_RD(x) |  (v)))
#define HW_RCM_RPFC_CLR(x, v)    (HW_RCM_RPFC_WR(x, HW_RCM_RPFC_RD(x) & ~(v)))
#define HW_RCM_RPFC_TOG(x, v)    (HW_RCM_RPFC_WR(x, HW_RCM_RPFC_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual RCM_RPFC bitfields
 */

/*!
 * @name Register RCM_RPFC, field RSTFLTSRW[1:0] (RW)
 *
 * Selects how the reset pin filter is enabled in run and wait modes.
 *
 * Values:
 * - 00 - All filtering disabled
 * - 01 - Bus clock filter enabled for normal operation
 * - 10 - LPO clock filter enabled for normal operation
 * - 11 - Reserved
 */
/*@{*/
#define BP_RCM_RPFC_RSTFLTSRW (0U)         /*!< Bit position for RCM_RPFC_RSTFLTSRW. */
#define BM_RCM_RPFC_RSTFLTSRW (0x03U)      /*!< Bit mask for RCM_RPFC_RSTFLTSRW. */
#define BS_RCM_RPFC_RSTFLTSRW (2U)         /*!< Bit field size in bits for RCM_RPFC_RSTFLTSRW. */

/*! @brief Read current value of the RCM_RPFC_RSTFLTSRW field. */
#define BR_RCM_RPFC_RSTFLTSRW(x) (HW_RCM_RPFC(x).B.RSTFLTSRW)

/*! @brief Format value for bitfield RCM_RPFC_RSTFLTSRW. */
#define BF_RCM_RPFC_RSTFLTSRW(v) ((uint8_t)((uint8_t)(v) << BP_RCM_RPFC_RSTFLTSRW) & BM_RCM_RPFC_RSTFLTSRW)

/*! @brief Set the RSTFLTSRW field to a new value. */
#define BW_RCM_RPFC_RSTFLTSRW(x, v) (HW_RCM_RPFC_WR(x, (HW_RCM_RPFC_RD(x) & ~BM_RCM_RPFC_RSTFLTSRW) | BF_RCM_RPFC_RSTFLTSRW(v)))
/*@}*/

/*!
 * @name Register RCM_RPFC, field RSTFLTSS[2] (RW)
 *
 * Selects how the reset pin filter is enabled in Stop and VLPS modes
 *
 * Values:
 * - 0 - All filtering disabled
 * - 1 - LPO clock filter enabled
 */
/*@{*/
#define BP_RCM_RPFC_RSTFLTSS (2U)          /*!< Bit position for RCM_RPFC_RSTFLTSS. */
#define BM_RCM_RPFC_RSTFLTSS (0x04U)       /*!< Bit mask for RCM_RPFC_RSTFLTSS. */
#define BS_RCM_RPFC_RSTFLTSS (1U)          /*!< Bit field size in bits for RCM_RPFC_RSTFLTSS. */

/*! @brief Read current value of the RCM_RPFC_RSTFLTSS field. */
#define BR_RCM_RPFC_RSTFLTSS(x) (BITBAND_ACCESS8(HW_RCM_RPFC_ADDR(x), BP_RCM_RPFC_RSTFLTSS))

/*! @brief Format value for bitfield RCM_RPFC_RSTFLTSS. */
#define BF_RCM_RPFC_RSTFLTSS(v) ((uint8_t)((uint8_t)(v) << BP_RCM_RPFC_RSTFLTSS) & BM_RCM_RPFC_RSTFLTSS)

/*! @brief Set the RSTFLTSS field to a new value. */
#define BW_RCM_RPFC_RSTFLTSS(x, v) (BITBAND_ACCESS8(HW_RCM_RPFC_ADDR(x), BP_RCM_RPFC_RSTFLTSS) = (v))
/*@}*/

/*******************************************************************************
 * HW_RCM_RPFW - Reset Pin Filter Width register
 ******************************************************************************/

/*!
 * @brief HW_RCM_RPFW - Reset Pin Filter Width register (RW)
 *
 * Reset value: 0x00U
 *
 * The reset values of the bits in the RSTFLTSEL field are for Chip POR only.
 * They are unaffected by other reset types.
 */
typedef union _hw_rcm_rpfw
{
    uint8_t U;
    struct _hw_rcm_rpfw_bitfields
    {
        uint8_t RSTFLTSEL : 5;         /*!< [4:0] Reset Pin Filter Bus Clock Select */
        uint8_t RESERVED0 : 3;         /*!< [7:5]  */
    } B;
} hw_rcm_rpfw_t;

/*!
 * @name Constants and macros for entire RCM_RPFW register
 */
/*@{*/
#define HW_RCM_RPFW_ADDR(x)      ((x) + 0x5U)

#define HW_RCM_RPFW(x)           (*(__IO hw_rcm_rpfw_t *) HW_RCM_RPFW_ADDR(x))
#define HW_RCM_RPFW_RD(x)        (HW_RCM_RPFW(x).U)
#define HW_RCM_RPFW_WR(x, v)     (HW_RCM_RPFW(x).U = (v))
#define HW_RCM_RPFW_SET(x, v)    (HW_RCM_RPFW_WR(x, HW_RCM_RPFW_RD(x) |  (v)))
#define HW_RCM_RPFW_CLR(x, v)    (HW_RCM_RPFW_WR(x, HW_RCM_RPFW_RD(x) & ~(v)))
#define HW_RCM_RPFW_TOG(x, v)    (HW_RCM_RPFW_WR(x, HW_RCM_RPFW_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual RCM_RPFW bitfields
 */

/*!
 * @name Register RCM_RPFW, field RSTFLTSEL[4:0] (RW)
 *
 * Selects the reset pin bus clock filter width.
 *
 * Values:
 * - 00000 - Bus clock filter count is 1
 * - 00001 - Bus clock filter count is 2
 * - 00010 - Bus clock filter count is 3
 * - 00011 - Bus clock filter count is 4
 * - 00100 - Bus clock filter count is 5
 * - 00101 - Bus clock filter count is 6
 * - 00110 - Bus clock filter count is 7
 * - 00111 - Bus clock filter count is 8
 * - 01000 - Bus clock filter count is 9
 * - 01001 - Bus clock filter count is 10
 * - 01010 - Bus clock filter count is 11
 * - 01011 - Bus clock filter count is 12
 * - 01100 - Bus clock filter count is 13
 * - 01101 - Bus clock filter count is 14
 * - 01110 - Bus clock filter count is 15
 * - 01111 - Bus clock filter count is 16
 * - 10000 - Bus clock filter count is 17
 * - 10001 - Bus clock filter count is 18
 * - 10010 - Bus clock filter count is 19
 * - 10011 - Bus clock filter count is 20
 * - 10100 - Bus clock filter count is 21
 * - 10101 - Bus clock filter count is 22
 * - 10110 - Bus clock filter count is 23
 * - 10111 - Bus clock filter count is 24
 * - 11000 - Bus clock filter count is 25
 * - 11001 - Bus clock filter count is 26
 * - 11010 - Bus clock filter count is 27
 * - 11011 - Bus clock filter count is 28
 * - 11100 - Bus clock filter count is 29
 * - 11101 - Bus clock filter count is 30
 * - 11110 - Bus clock filter count is 31
 * - 11111 - Bus clock filter count is 32
 */
/*@{*/
#define BP_RCM_RPFW_RSTFLTSEL (0U)         /*!< Bit position for RCM_RPFW_RSTFLTSEL. */
#define BM_RCM_RPFW_RSTFLTSEL (0x1FU)      /*!< Bit mask for RCM_RPFW_RSTFLTSEL. */
#define BS_RCM_RPFW_RSTFLTSEL (5U)         /*!< Bit field size in bits for RCM_RPFW_RSTFLTSEL. */

/*! @brief Read current value of the RCM_RPFW_RSTFLTSEL field. */
#define BR_RCM_RPFW_RSTFLTSEL(x) (HW_RCM_RPFW(x).B.RSTFLTSEL)

/*! @brief Format value for bitfield RCM_RPFW_RSTFLTSEL. */
#define BF_RCM_RPFW_RSTFLTSEL(v) ((uint8_t)((uint8_t)(v) << BP_RCM_RPFW_RSTFLTSEL) & BM_RCM_RPFW_RSTFLTSEL)

/*! @brief Set the RSTFLTSEL field to a new value. */
#define BW_RCM_RPFW_RSTFLTSEL(x, v) (HW_RCM_RPFW_WR(x, (HW_RCM_RPFW_RD(x) & ~BM_RCM_RPFW_RSTFLTSEL) | BF_RCM_RPFW_RSTFLTSEL(v)))
/*@}*/

/*******************************************************************************
 * HW_RCM_MR - Mode Register
 ******************************************************************************/

/*!
 * @brief HW_RCM_MR - Mode Register (RO)
 *
 * Reset value: 0x00U
 *
 * This register includes read-only status flags to indicate the state of the
 * mode pins during the last Chip Reset.
 */
typedef union _hw_rcm_mr
{
    uint8_t U;
    struct _hw_rcm_mr_bitfields
    {
        uint8_t RESERVED0 : 1;         /*!< [0]  */
        uint8_t EZP_MS : 1;            /*!< [1] EZP_MS_B pin state */
        uint8_t RESERVED1 : 6;         /*!< [7:2]  */
    } B;
} hw_rcm_mr_t;

/*!
 * @name Constants and macros for entire RCM_MR register
 */
/*@{*/
#define HW_RCM_MR_ADDR(x)        ((x) + 0x7U)

#define HW_RCM_MR(x)             (*(__I hw_rcm_mr_t *) HW_RCM_MR_ADDR(x))
#define HW_RCM_MR_RD(x)          (HW_RCM_MR(x).U)
/*@}*/

/*
 * Constants & macros for individual RCM_MR bitfields
 */

/*!
 * @name Register RCM_MR, field EZP_MS[1] (RO)
 *
 * Reflects the state of the EZP_MS pin during the last Chip Reset
 *
 * Values:
 * - 0 - Pin deasserted (logic 1)
 * - 1 - Pin asserted (logic 0)
 */
/*@{*/
#define BP_RCM_MR_EZP_MS     (1U)          /*!< Bit position for RCM_MR_EZP_MS. */
#define BM_RCM_MR_EZP_MS     (0x02U)       /*!< Bit mask for RCM_MR_EZP_MS. */
#define BS_RCM_MR_EZP_MS     (1U)          /*!< Bit field size in bits for RCM_MR_EZP_MS. */

/*! @brief Read current value of the RCM_MR_EZP_MS field. */
#define BR_RCM_MR_EZP_MS(x)  (BITBAND_ACCESS8(HW_RCM_MR_ADDR(x), BP_RCM_MR_EZP_MS))
/*@}*/

/*******************************************************************************
 * hw_rcm_t - module struct
 ******************************************************************************/
/*!
 * @brief All RCM module registers.
 */
#pragma pack(1)
typedef struct _hw_rcm
{
    __I hw_rcm_srs0_t SRS0;                /*!< [0x0] System Reset Status Register 0 */
    __I hw_rcm_srs1_t SRS1;                /*!< [0x1] System Reset Status Register 1 */
    uint8_t _reserved0[2];
    __IO hw_rcm_rpfc_t RPFC;               /*!< [0x4] Reset Pin Filter Control register */
    __IO hw_rcm_rpfw_t RPFW;               /*!< [0x5] Reset Pin Filter Width register */
    uint8_t _reserved1[1];
    __I hw_rcm_mr_t MR;                    /*!< [0x7] Mode Register */
} hw_rcm_t;
#pragma pack()

/*! @brief Macro to access all RCM registers. */
/*! @param x RCM module instance base address. */
/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
 *     use the '&' operator, like <code>&HW_RCM(RCM_BASE)</code>. */
#define HW_RCM(x)      (*(hw_rcm_t *)(x))

#endif /* __HW_RCM_REGISTERS_H__ */
/* EOF */