summaryrefslogtreecommitdiff
path: root/tmk_core/common/avr/bootloader.c
blob: cda295b1811e92f90baea342084b37a07139bcc1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <util/delay.h>
#include "bootloader.h"

#ifdef PROTOCOL_LUFA
#include <LUFA/Drivers/USB/USB.h>
#endif


/* Boot Section Size in *BYTEs*
 *   Teensy   halfKay    512
 *   Teensy++ halfKay    1024
 *   Atmel DFU loader    4096
 *   LUFA bootloader     4096
 *   USBaspLoader        2048
 */
#ifndef BOOTLOADER_SIZE
#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h.
#define BOOTLOADER_SIZE     4096
#endif

#define FLASH_SIZE          (FLASHEND + 1L)
#define BOOTLOADER_START    (FLASH_SIZE - BOOTLOADER_SIZE)


/* 
 * Entering the Bootloader via Software 
 * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
 */
#define BOOTLOADER_RESET_KEY 0xB007B007
uint32_t reset_key  __attribute__ ((section (".noinit")));

/* initialize MCU status by watchdog reset */
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
    USB_Disable();
    cli();
    _delay_ms(2000);
#endif

#ifdef PROTOCOL_PJRC
    cli();
    UDCON = 1;
    USBCON = (1<<FRZCLK);
    UCSR1B = 0;
    _delay_ms(5);
#endif

    // watchdog reset
    reset_key = BOOTLOADER_RESET_KEY;
    wdt_enable(WDTO_250MS);
    for (;;);
}


/* this runs before main() */
void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
void bootloader_jump_after_watchdog_reset(void)
{
    if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
        reset_key = 0;

        // My custom USBasploader requires this to come up.
        MCUSR = 0;

        // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog.
        MCUSR &= ~(1<<WDRF);
        wdt_disable();

        // This is compled into 'icall', address should be in word unit, not byte.
        ((void (*)(void))(BOOTLOADER_START/2))();
    }
}


#if 0
/* Jumping To The Bootloader
 * http://www.pjrc.com/teensy/jump_to_bootloader.html
 * 
 * This method doen't work when using LUFA. idk why.
 * - needs to initialize more regisers or interrupt setting?
 */
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
    USB_Disable();
    cli();
    _delay_ms(2000);
#endif

#ifdef PROTOCOL_PJRC
    cli();
    UDCON = 1;
    USBCON = (1<<FRZCLK);
    UCSR1B = 0;
    _delay_ms(5);
#endif

    /*
     * Initialize
     */
#if defined(__AVR_AT90USB162__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
    TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
    DDRB = 0; DDRC = 0; DDRD = 0;
    PORTB = 0; PORTC = 0; PORTD = 0;
#elif defined(__AVR_ATmega32U4__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
    DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
    PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB646__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
    DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
    PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB1286__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
    DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
    PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#endif

    /*
     * USBaspLoader
     */
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
    // This makes custom USBasploader come up.
    MCUSR = 0;

    // initialize ports
    PORTB = 0; PORTC= 0; PORTD = 0;
    DDRB = 0; DDRC= 0; DDRD = 0;

    // disable interrupts
    EIMSK = 0; EECR = 0; SPCR = 0;
    ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
    ADCSRA = 0; TWCR = 0; UCSR0B = 0;
#endif

    // This is compled into 'icall', address should be in word unit, not byte.
    ((void (*)(void))(BOOTLOADER_START/2))();
}
#endif