# navpad 1.0 with Helix (Right hand side)  Navpad connected with helix keyboard (Right Side) * Keyboard Maintainer: [yushakobo](https://github.com/yushakobo) * Hardware Supported: Navpad 1.0 PCB and Helix PCB, Pro Micro * Hardware Availability: https://shop.yushakobo.jp/products/navpad-10 Make example for this keyboard (after setting up your build environment): make yushakobo/navpad/10_helix_r:default Flashing examples for this keyboard... Helix side: make yushakobo/navpad/10_helix_r:default:avrdude-split-right Navpad side: make yushakobo/navpad/10_helix_r:default:avrdude-split-left See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available