# Aurora Helix's Debug Keymap

To make debugging your build as easy as possible, we have provided a special debugging keymap. It is not intended to actually type on, it is just here to make sure that your hardware is working correctly.

## Keys

![Keys](https://raw.githubusercontent.com/splitkb/qmk_firmware/assets/aurora/keymaps/debug/keys.png)

The left side uses lowercase letters, the right side uses uppercase ones.

## Encoders

Encoders output a number of 0 or 1, depending on the installed position.
These correspond to the index used for custom encoder code: the left half uses index 0, the right half uses index 1.

The number is followed by either a `+` or a `-`, depending on the direction turned.

## LEDs

Both underglow and per-key RGB should be fading between red and off.

## OLEDs

Both the primary and secondary side should be filled with characters.