/* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #pragma once #define WEBUSB_LANDING_PAGE_URL u8"configure.ergodox-ez.com" /* key matrix size */ #define MATRIX_ROWS 12 #define MATRIX_COLS 7 /* PCB default pin-out */ // #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 } // #define MATRIX_COL_PINS { A0, A1, A2, A3, A6, A7, B0 } // #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 } // #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 } // #define MCP23_LED_R GPB7 // #define MCP23_LED_G GPB6 // #define MCP23_LED_B GPA7 #define EEPROM_I2C_24LC128 // Not needed, is default address: // #define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT #define DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_GND #define DRIVER_ADDR_2 IS31FL3731_I2C_ADDRESS_VCC #define IS31FL3731_DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 36 #define DRIVER_2_LED_TOTAL 36 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) #define RGB_MATRIX_CENTER { 120, 36 } #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 175 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES #define RGB_DISABLE_WHEN_USB_SUSPENDED // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects # define ENABLE_RGB_MATRIX_ALPHAS_MODS # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN # define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT # define ENABLE_RGB_MATRIX_BREATHING # define ENABLE_RGB_MATRIX_BAND_SAT # define ENABLE_RGB_MATRIX_BAND_VAL # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT # define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL # define ENABLE_RGB_MATRIX_CYCLE_ALL # define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT # define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN # define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL # define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL # define ENABLE_RGB_MATRIX_CYCLE_SPIRAL # define ENABLE_RGB_MATRIX_DUAL_BEACON # define ENABLE_RGB_MATRIX_RAINBOW_BEACON # define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS # define ENABLE_RGB_MATRIX_RAINDROPS # define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS # define ENABLE_RGB_MATRIX_HUE_BREATHING # define ENABLE_RGB_MATRIX_HUE_PENDULUM # define ENABLE_RGB_MATRIX_HUE_WAVE # define ENABLE_RGB_MATRIX_PIXEL_RAIN # define ENABLE_RGB_MATRIX_PIXEL_FLOW # define ENABLE_RGB_MATRIX_PIXEL_FRACTAL // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined # define ENABLE_RGB_MATRIX_TYPING_HEATMAP # define ENABLE_RGB_MATRIX_DIGITAL_RAIN // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE # define ENABLE_RGB_MATRIX_SOLID_REACTIVE # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS # define ENABLE_RGB_MATRIX_SPLASH # define ENABLE_RGB_MATRIX_MULTISPLASH # define ENABLE_RGB_MATRIX_SOLID_SPLASH # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // #define RGB_MATRIX_LED_PROCESS_LIMIT 5 // #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_DELAY 0 #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 400 #define MOUSEKEY_WHEEL_INTERVAL MOUSEKEY_INTERVAL #define MOUSEKEY_WHEEL_MAX_SPEED MOUSEKEY_MAX_SPEED #define MOUSEKEY_WHEEL_TIME_TO_MAX MOUSEKEY_TIME_TO_MAX #define MUSIC_MAP #define FIRMWARE_VERSION_SIZE 17 #define DYNAMIC_KEYMAP_EEPROM_ADDR (EECONFIG_SIZE + FIRMWARE_VERSION_SIZE) #ifdef EEPROM_I2C # define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 16383 # define DYNAMIC_KEYMAP_LAYER_COUNT 8 #endif #define AUDIO_PIN A5 #define AUDIO_PIN_ALT A4 #define AUDIO_PIN_ALT_AS_NEGATIVE