# The Kudox Full keyboard   |  :----:|:-----: front | angle - Keyboard Maintainer: [Kumao Kobo](https://github.com/kumaokobo) - Hardware Supported: Kudox Full PCB rev1.0 w/ Pro Micro - Assembly guide: [Kudox Full/README](https://github.com/kumaokobo/kudox-keyboard/blob/master/kudox-full/README.md) ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Building Firmware Make example for this keyboard (after setting up your build environment): make kudox_full/rev1:default Flashing example for this keyboard: make kudox_full/rev1:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).