/* Copyright 2021 Evelien Dekkers This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #pragma once /* key matrix size */ #define MATRIX_ROWS 4 #define MATRIX_COLS 13 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #define MATRIX_ROW_PINS {B1,B2,B3,D4} #define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,E6,D7,B4,B5,B6,C6,C7} /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 //#define RGB_DI_PIN E2 //#ifdef RGB_DI_PIN //# define RGBLED_NUM 16 //# define RGBLIGHT_HUE_STEP 8 //# define RGBLIGHT_SAT_STEP 8 //# define RGBLIGHT_VAL_STEP 8 //# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ //# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== customize breathing effect ==*/ /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ //# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 /*==== use exp() and sin() ====*/ //# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 //#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is useful for the Windows task manager shortcut (ctrl+shift+esc). */ //#define GRAVE_ESC_CTRL_OVERRIDE /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT /* Bootmagic Lite key configuration */ //#define BOOTMAGIC_LITE_ROW 0 //#define BOOTMAGIC_LITE_COLUMN 0 // This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) // The address will vary depending on your wiring: // 00 <-> GND // 01 <-> SCL // 10 <-> SDA // 11 <-> VCC // ADDR1 represents A1:A0 of the 7-bit address. // ADDR2 represents A3:A2 of the 7-bit address. // The result is: 0b101(ADDR2)(ADDR1) #define DRIVER_ADDR_1 0b1010000 #define DRIVER_COUNT 1 #define RGB_MATRIX_LED_COUNT 64 // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects #define ENABLE_RGB_MATRIX_ALPHAS_MODS #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT #define ENABLE_RGB_MATRIX_BREATHING #define ENABLE_RGB_MATRIX_BAND_SAT #define ENABLE_RGB_MATRIX_BAND_VAL #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL #define ENABLE_RGB_MATRIX_CYCLE_ALL #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL #define ENABLE_RGB_MATRIX_DUAL_BEACON #define ENABLE_RGB_MATRIX_RAINBOW_BEACON #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS #define ENABLE_RGB_MATRIX_RAINDROPS #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS #define ENABLE_RGB_MATRIX_HUE_BREATHING #define ENABLE_RGB_MATRIX_HUE_PENDULUM #define ENABLE_RGB_MATRIX_HUE_WAVE #define ENABLE_RGB_MATRIX_PIXEL_RAIN #define ENABLE_RGB_MATRIX_PIXEL_FLOW #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined #define ENABLE_RGB_MATRIX_TYPING_HEATMAP #define ENABLE_RGB_MATRIX_DIGITAL_RAIN // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS #define ENABLE_RGB_MATRIX_SPLASH #define ENABLE_RGB_MATRIX_MULTISPLASH #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH