/* Copyright 2019 Ryan Caltabiano Copyright 2022 Jose Pablo Ramirez This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "oled_driver.h" #include "oled_driver_spi.h" #include "spi_master.h" #include #include OLED_FONT_H #include "timer.h" #include "print.h" #include #include "progmem.h" #include "keyboard.h" // Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf // for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf // Fundamental Commands #define CONTRAST 0x81 #define DISPLAY_ALL_ON 0xA5 #define DISPLAY_ALL_ON_RESUME 0xA4 #define NORMAL_DISPLAY 0xA6 #define INVERT_DISPLAY 0xA7 #define DISPLAY_ON 0xAF #define DISPLAY_OFF 0xAE #define NOP 0xE3 // Scrolling Commands #define ACTIVATE_SCROLL 0x2F #define DEACTIVATE_SCROLL 0x2E #define SCROLL_RIGHT 0x26 #define SCROLL_LEFT 0x27 #define SCROLL_RIGHT_UP 0x29 #define SCROLL_LEFT_UP 0x2A // Addressing Setting Commands #define MEMORY_MODE 0x20 #define COLUMN_ADDR 0x21 #define PAGE_ADDR 0x22 #define PAM_SETCOLUMN_LSB 0x00 #define PAM_SETCOLUMN_MSB 0x10 #define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 // Hardware Configuration Commands #define DISPLAY_START_LINE 0x40 #define SEGMENT_REMAP 0xA0 #define SEGMENT_REMAP_INV 0xA1 #define MULTIPLEX_RATIO 0xA8 #define COM_SCAN_INC 0xC0 #define COM_SCAN_DEC 0xC8 #define DISPLAY_OFFSET 0xD3 #define COM_PINS 0xDA #define COM_PINS_SEQ 0x02 #define COM_PINS_ALT 0x12 #define COM_PINS_SEQ_LR 0x22 #define COM_PINS_ALT_LR 0x32 // Timing & Driving Commands #define DISPLAY_CLOCK 0xD5 #define PRE_CHARGE_PERIOD 0xD9 #define VCOM_DETECT 0xDB // Advance Graphic Commands #define FADE_BLINK 0x23 #define ENABLE_FADE 0x20 #define ENABLE_BLINK 0x30 // Charge Pump Commands #define CHARGE_PUMP 0x8D // Misc defines #ifndef OLED_BLOCK_COUNT # define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) #endif #ifndef OLED_BLOCK_SIZE # define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) #endif #define OLED_ALL_BLOCKS_MASK (((((OLED_BLOCK_TYPE)1 << (OLED_BLOCK_COUNT - 1)) - 1) << 1) | 1) #define ARRAY_SIZE(arr) sizeof(arr)/sizeof(arr[0]) // spi defines #define OLED_STATUS_SUCCESS SPI_STATUS_SUCCESS void oled_spi_init(void) { spi_init(); setPinOutput(OLED_CS_PIN); writePinHigh(OLED_CS_PIN); setPinOutput(OLED_DC_PIN); writePinLow(OLED_DC_PIN); } void oled_spi_start(void) { spi_start(OLED_CS_PIN, false, OLED_SPI_MODE, OLED_SPI_DIVISOR); } void oled_spi_stop(void) { spi_stop(); } // Transmit/Write Funcs. bool oled_cmd(const uint8_t *data, uint16_t size) { oled_spi_start(); // Command Mode writePinLow(OLED_DC_PIN); // Send the commands if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){ oled_spi_stop(); return false; } oled_spi_stop(); return true; } bool oled_cmd_p(const uint8_t *data, uint16_t size) { return oled_cmd(data, size); } bool oled_write_reg(const uint8_t *data, uint16_t size) { oled_spi_start(); // Command Mode writePinHigh(OLED_DC_PIN); // Send the commands if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){ oled_spi_stop(); return false; } oled_spi_stop(); return true; } #define HAS_FLAGS(bits, flags) ((bits & flags) == flags) // Display buffer's is the same as the OLED memory layout // this is so we don't end up with rounding errors with // parts of the display unusable or don't get cleared correctly // and also allows for drawing & inverting uint8_t oled_buffer[OLED_MATRIX_SIZE]; uint8_t * oled_cursor; OLED_BLOCK_TYPE oled_dirty = 0; bool oled_initialized = false; bool oled_active = false; bool oled_scrolling = false; bool oled_inverted = false; uint8_t oled_brightness = OLED_BRIGHTNESS; oled_rotation_t oled_rotation = 0; uint8_t oled_rotation_width = 0; uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values uint8_t oled_scroll_start = 0; uint8_t oled_scroll_end = 7; #if OLED_TIMEOUT > 0 uint32_t oled_timeout; #endif #if OLED_SCROLL_TIMEOUT > 0 uint32_t oled_scroll_timeout; #endif #if OLED_UPDATE_INTERVAL > 0 uint16_t oled_update_timeout; #endif // Flips the rendering bits for a character at the current cursor position static void InvertCharacter(uint8_t *cursor) { const uint8_t *end = cursor + OLED_FONT_WIDTH; while (cursor < end) { *cursor = ~(*cursor); cursor++; } } bool oled_init(oled_rotation_t rotation) { oled_rotation = oled_init_user(oled_init_kb(rotation)); if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { oled_rotation_width = OLED_DISPLAY_WIDTH; } else { oled_rotation_width = OLED_DISPLAY_HEIGHT; } oled_spi_init(); #ifdef OLED_RST_PIN /* Reset device */ setPinOutput(OLED_RST_PIN); writePinLow(OLED_RST_PIN); wait_ms(20); writePinHigh(OLED_RST_PIN); wait_ms(20); #endif static const uint8_t PROGMEM display_setup1[] = { DISPLAY_OFF, DISPLAY_CLOCK, 0x80, MULTIPLEX_RATIO, OLED_DISPLAY_HEIGHT - 1, DISPLAY_OFFSET, 0x00, DISPLAY_START_LINE | 0x00, CHARGE_PUMP, 0x14, #if (OLED_IC != OLED_IC_SH1106) // MEMORY_MODE is unsupported on SH1106 (Page Addressing only) MEMORY_MODE, 0x00, // Horizontal addressing mode #endif }; if (!oled_cmd_p(display_setup1, ARRAY_SIZE(display_setup1))) { print("oled_init cmd set 1 failed\n"); return false; } if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) { static const uint8_t PROGMEM display_normal[] = {SEGMENT_REMAP_INV, COM_SCAN_DEC}; if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) { print("oled_init cmd normal rotation failed\n"); return false; } } else { static const uint8_t PROGMEM display_flipped[] = {SEGMENT_REMAP, COM_SCAN_INC}; if (!oled_cmd_p(display_flipped, ARRAY_SIZE(display_flipped))) { print("display_flipped failed\n"); return false; } } static const uint8_t PROGMEM display_setup2[] = {COM_PINS, OLED_COM_PINS, CONTRAST, OLED_BRIGHTNESS, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x20, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON}; if (!oled_cmd_p(display_setup2, ARRAY_SIZE(display_setup2))) { print("display_setup2 failed\n"); return false; } #if OLED_TIMEOUT > 0 oled_timeout = timer_read32() + OLED_TIMEOUT; #endif #if OLED_SCROLL_TIMEOUT > 0 oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT; #endif oled_clear(); oled_initialized = true; oled_active = true; oled_scrolling = false; return true; } __attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return rotation; } __attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } void oled_clear(void) { memset(oled_buffer, 0, sizeof(oled_buffer)); oled_cursor = &oled_buffer[0]; oled_dirty = OLED_ALL_BLOCKS_MASK; } static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) { // Calculate commands to set memory addressing bounds. uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; #if (OLED_IC == OLED_IC_SH1106) // Commands for Page Addressing Mode. Sets starting page and column; has no end bound. // Column value must be split into high and low nybble and sent as two commands. cmd_array[0] = PAM_PAGE_ADDR | start_page; cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f); cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f); cmd_array[3] = NOP; cmd_array[4] = NOP; cmd_array[5] = NOP; #else // Commands for use in Horizontal Addressing mode. cmd_array[1] = start_column; cmd_array[4] = start_page; cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1]; cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1; #endif } static void calc_bounds_90(uint8_t update_start, uint8_t *cmd_array) { cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8; cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT; cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1]; ; cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8; } uint8_t crot(uint8_t a, int8_t n) { const uint8_t mask = 0x7; n &= mask; return a << n | a >> (-n & mask); } static void rotate_90(const uint8_t *src, uint8_t *dest) { for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) { uint8_t selector = (1 << i); for (uint8_t j = 0; j < 8; ++j) { dest[i] |= crot(src[j] & selector, shift - (int8_t)j); } } } void oled_render(void) { if (!oled_initialized) { return; } // Do we have work to do? oled_dirty &= OLED_ALL_BLOCKS_MASK; if (!oled_dirty || oled_scrolling) { return; } // Find first dirty block uint8_t update_start = 0; while (!(oled_dirty & ((OLED_BLOCK_TYPE)1 << update_start))) { ++update_start; } // Set column & page position static uint8_t display_start[] = {COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1}; if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { calc_bounds(update_start, display_start); } else { calc_bounds_90(update_start, display_start); } // Send column & page position if (!oled_cmd(display_start, ARRAY_SIZE(display_start))) { print("oled_render offset command failed\n"); return; } if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { // Send render data chunk as is if (!oled_write_reg(&oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE)) { print("oled_render data failed\n"); return; } } else { // Rotate the render chunks const static uint8_t source_map[] = OLED_SOURCE_MAP; const static uint8_t target_map[] = OLED_TARGET_MAP; static uint8_t temp_buffer[OLED_BLOCK_SIZE]; memset(temp_buffer, 0, sizeof(temp_buffer)); for (uint8_t i = 0; i < sizeof(source_map); ++i) { rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]); } // Send render data chunk after rotating if (!oled_write_reg(temp_buffer, OLED_BLOCK_SIZE)) { print("oled_render90 data failed\n"); return; } } // Turn on display if it is off oled_on(); // Clear dirty flag oled_dirty &= ~((OLED_BLOCK_TYPE)1 << update_start); } void oled_set_cursor(uint8_t col, uint8_t line) { uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH; // Out of bounds? if (index >= OLED_MATRIX_SIZE) { index = 0; } oled_cursor = &oled_buffer[index]; } void oled_advance_page(bool clearPageRemainder) { uint16_t index = oled_cursor - &oled_buffer[0]; uint8_t remaining = oled_rotation_width - (index % oled_rotation_width); if (clearPageRemainder) { // Remaining Char count remaining = remaining / OLED_FONT_WIDTH; // Write empty character until next line while (remaining--) oled_write_char(' ', false); } else { // Next page index out of bounds? if (index + remaining >= OLED_MATRIX_SIZE) { index = 0; remaining = 0; } oled_cursor = &oled_buffer[index + remaining]; } } void oled_advance_char(void) { uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH; uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width); // Do we have enough space on the current line for the next character if (remainingSpace < OLED_FONT_WIDTH) { nextIndex += remainingSpace; } // Did we go out of bounds if (nextIndex >= OLED_MATRIX_SIZE) { nextIndex = 0; } // Update cursor position oled_cursor = &oled_buffer[nextIndex]; } // Main handler that writes character data to the display buffer void oled_write_char(const char data, bool invert) { // Advance to the next line if newline if (data == '\n') { // Old source wrote ' ' until end of line... oled_advance_page(true); return; } if (data == '\r') { oled_advance_page(false); return; } // copy the current render buffer to check for dirty after static uint8_t oled_temp_buffer[OLED_FONT_WIDTH]; memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH); _Static_assert(sizeof(font) >= ((OLED_FONT_END + 1 - OLED_FONT_START) * OLED_FONT_WIDTH), "OLED_FONT_END references outside array"); // set the reder buffer data uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) { memset(oled_cursor, 0x00, OLED_FONT_WIDTH); } else { const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH]; memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH); } // Invert if needed if (invert) { InvertCharacter(oled_cursor); } // Dirty check if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) { uint16_t index = oled_cursor - &oled_buffer[0]; oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE)); // Edgecase check if the written data spans the 2 chunks oled_dirty |= ((OLED_BLOCK_TYPE)1 << ((index + OLED_FONT_WIDTH - 1) / OLED_BLOCK_SIZE)); } // Finally move to the next char oled_advance_char(); } void oled_write(const char *data, bool invert) { const char *end = data + strlen(data); while (data < end) { oled_write_char(*data, invert); data++; } } void oled_write_ln(const char *data, bool invert) { oled_write(data, invert); oled_advance_page(true); } void oled_pan(bool left) { uint16_t i = 0; for (uint16_t y = 0; y < OLED_DISPLAY_HEIGHT / 8; y++) { if (left) { for (uint16_t x = 0; x < OLED_DISPLAY_WIDTH - 1; x++) { i = y * OLED_DISPLAY_WIDTH + x; oled_buffer[i] = oled_buffer[i + 1]; } } else { for (uint16_t x = OLED_DISPLAY_WIDTH - 1; x > 0; x--) { i = y * OLED_DISPLAY_WIDTH + x; oled_buffer[i] = oled_buffer[i - 1]; } } } oled_dirty = OLED_ALL_BLOCKS_MASK; } oled_buffer_reader_t oled_read_raw(uint16_t start_index) { if (start_index > OLED_MATRIX_SIZE) start_index = OLED_MATRIX_SIZE; oled_buffer_reader_t ret_reader; ret_reader.current_element = &oled_buffer[start_index]; ret_reader.remaining_element_count = OLED_MATRIX_SIZE - start_index; return ret_reader; } void oled_write_raw_byte(const char data, uint16_t index) { if (index > OLED_MATRIX_SIZE) index = OLED_MATRIX_SIZE; if (oled_buffer[index] == data) return; oled_buffer[index] = data; oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE)); } void oled_write_raw(const char *data, uint16_t size) { uint16_t cursor_start_index = oled_cursor - &oled_buffer[0]; if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index; for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) { uint8_t c = *data++; if (oled_buffer[i] == c) continue; oled_buffer[i] = c; oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE)); } } void oled_write_pixel(uint8_t x, uint8_t y, bool on) { if (x >= oled_rotation_width) { return; } uint16_t index = x + (y / 8) * oled_rotation_width; if (index >= OLED_MATRIX_SIZE) { return; } uint8_t data = oled_buffer[index]; if (on) { data |= (1 << (y % 8)); } else { data &= ~(1 << (y % 8)); } if (oled_buffer[index] != data) { oled_buffer[index] = data; oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE)); } } #if defined(__AVR__) void oled_write_P(const char *data, bool invert) { uint8_t c = pgm_read_byte(data); while (c != 0) { oled_write_char(c, invert); c = pgm_read_byte(++data); } } void oled_write_ln_P(const char *data, bool invert) { oled_write_P(data, invert); oled_advance_page(true); } void oled_write_raw_P(const char *data, uint16_t size) { uint16_t cursor_start_index = oled_cursor - &oled_buffer[0]; if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index; for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) { uint8_t c = pgm_read_byte(data++); if (oled_buffer[i] == c) continue; oled_buffer[i] = c; oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE)); } } #endif // defined(__AVR__) bool oled_on(void) { if (!oled_initialized) { return oled_active; } #if OLED_TIMEOUT > 0 oled_timeout = timer_read32() + OLED_TIMEOUT; #endif static const uint8_t PROGMEM display_on[] = #ifdef OLED_FADE_OUT {FADE_BLINK, 0x00}; #else {DISPLAY_ON}; #endif if (!oled_active) { if (!oled_cmd_p(display_on, ARRAY_SIZE(display_on))) { print("oled_on cmd failed\n"); return oled_active; } oled_active = true; } return oled_active; } bool oled_off(void) { if (!oled_initialized) { return !oled_active; } static const uint8_t PROGMEM display_off[] = #ifdef OLED_FADE_OUT {FADE_BLINK, ENABLE_FADE | OLED_FADE_OUT_INTERVAL}; #else {DISPLAY_OFF}; #endif if (oled_active) { if (!oled_cmd_p(display_off, ARRAY_SIZE(display_off))) { print("oled_off cmd failed\n"); return oled_active; } oled_active = false; } return !oled_active; } bool is_oled_on(void) { return oled_active; } uint8_t oled_set_brightness(uint8_t level) { if (!oled_initialized) { return oled_brightness; } uint8_t set_contrast[] = { CONTRAST, level}; if (oled_brightness != level) { if (!oled_cmd(set_contrast, ARRAY_SIZE(set_contrast))) { print("set_brightness cmd failed\n"); return oled_brightness; } oled_brightness = level; } return oled_brightness; } uint8_t oled_get_brightness(void) { return oled_brightness; } // Set the specific 8 lines rows of the screen to scroll. // 0 is the default for start, and 7 for end, which is the entire // height of the screen. For 128x32 screens, rows 4-7 are not used. void oled_scroll_set_area(uint8_t start_line, uint8_t end_line) { oled_scroll_start = start_line; oled_scroll_end = end_line; } void oled_scroll_set_speed(uint8_t speed) { // Sets the speed for scrolling... does not take effect // until scrolling is either started or restarted // the ssd1306 supports 8 speeds // FrameRate2 speed = 7 // FrameRate3 speed = 4 // FrameRate4 speed = 5 // FrameRate5 speed = 0 // FrameRate25 speed = 6 // FrameRate64 speed = 1 // FrameRate128 speed = 2 // FrameRate256 speed = 3 // for ease of use these are remaped here to be in order static const uint8_t scroll_remap[8] = {7, 4, 5, 0, 6, 1, 2, 3}; oled_scroll_speed = scroll_remap[speed]; } bool oled_scroll_right(void) { if (!oled_initialized) { return oled_scrolling; } // Dont enable scrolling if we need to update the display // This prevents scrolling of bad data from starting the scroll too early after init if (!oled_dirty && !oled_scrolling) { uint8_t display_scroll_right[] = {SCROLL_RIGHT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL}; if (!oled_cmd(display_scroll_right, ARRAY_SIZE(display_scroll_right))) { print("oled_scroll_right cmd failed\n"); return oled_scrolling; } oled_scrolling = true; } return oled_scrolling; } bool oled_scroll_left(void) { if (!oled_initialized) { return oled_scrolling; } // Dont enable scrolling if we need to update the display // This prevents scrolling of bad data from starting the scroll too early after init if (!oled_dirty && !oled_scrolling) { uint8_t display_scroll_left[] = {SCROLL_LEFT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL}; if (!oled_cmd(display_scroll_left, ARRAY_SIZE(display_scroll_left))) { print("oled_scroll_left cmd failed\n"); return oled_scrolling; } oled_scrolling = true; } return oled_scrolling; } bool oled_scroll_off(void) { if (!oled_initialized) { return !oled_scrolling; } if (oled_scrolling) { static const uint8_t PROGMEM display_scroll_off[] = {DEACTIVATE_SCROLL}; if (!oled_cmd_p(display_scroll_off, ARRAY_SIZE(display_scroll_off))) { print("oled_scroll_off cmd failed\n"); return oled_scrolling; } oled_scrolling = false; oled_dirty = OLED_ALL_BLOCKS_MASK; } return !oled_scrolling; } bool is_oled_scrolling(void) { return oled_scrolling; } bool oled_invert(bool invert) { if (!oled_initialized) { return oled_inverted; } if (invert && !oled_inverted) { static const uint8_t PROGMEM display_inverted[] = {INVERT_DISPLAY}; if (!oled_cmd_p(display_inverted, ARRAY_SIZE(display_inverted))) { print("oled_invert cmd failed\n"); return oled_inverted; } oled_inverted = true; } else if (!invert && oled_inverted) { static const uint8_t PROGMEM display_normal[] = {NORMAL_DISPLAY}; if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) { print("oled_invert cmd failed\n"); return oled_inverted; } oled_inverted = false; } return oled_inverted; } uint8_t oled_max_chars(void) { if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH; } return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH; } uint8_t oled_max_lines(void) { if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT; } return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT; } void oled_task(void) { if (!oled_initialized) { return; } #if OLED_UPDATE_INTERVAL > 0 if (timer_elapsed(oled_update_timeout) >= OLED_UPDATE_INTERVAL) { oled_update_timeout = timer_read(); oled_set_cursor(0, 0); oled_task_kb(); } #else oled_set_cursor(0, 0); oled_task_kb(); #endif #if OLED_SCROLL_TIMEOUT > 0 if (oled_dirty && oled_scrolling) { oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT; oled_scroll_off(); } #endif // Smart render system, no need to check for dirty oled_render(); // Display timeout check #if OLED_TIMEOUT > 0 if (oled_active && timer_expired32(timer_read32(), oled_timeout)) { oled_off(); } #endif #if OLED_SCROLL_TIMEOUT > 0 if (!oled_scrolling && timer_expired32(timer_read32(), oled_scroll_timeout)) { # ifdef OLED_SCROLL_TIMEOUT_RIGHT oled_scroll_right(); # else oled_scroll_left(); # endif } #endif } __attribute__((weak)) bool oled_task_kb(void) { return oled_task_user(); } __attribute__((weak)) bool oled_task_user(void) { return true; }