/* Copyright 2017 Jason Williams
* Copyright 2018 Jack Humbert
* Copyright 2018 Yiancar
* Copyright 2020 MelGeek
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*/
#include "is31fl3741-simple.h"
#include
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3741_PWM_REGISTER_COUNT 351
#ifndef IS31FL3741_I2C_TIMEOUT
# define IS31FL3741_I2C_TIMEOUT 100
#endif
#ifndef IS31FL3741_I2C_PERSISTENCE
# define IS31FL3741_I2C_PERSISTENCE 0
#endif
#ifndef IS31FL3741_CONFIGURATION
# define IS31FL3741_CONFIGURATION 0x01
#endif
#ifndef IS31FL3741_PWM_FREQUENCY
# define IS31FL3741_PWM_FREQUENCY IS31FL3741_PWM_FREQUENCY_29K_HZ
#endif
#ifndef IS31FL3741_SW_PULLUP
# define IS31FL3741_SW_PULLUP IS31FL3741_PUR_32K_OHM
#endif
#ifndef IS31FL3741_CS_PULLDOWN
# define IS31FL3741_CS_PULLDOWN IS31FL3741_PDR_32K_OHM
#endif
#ifndef IS31FL3741_GLOBAL_CURRENT
# define IS31FL3741_GLOBAL_CURRENT 0xFF
#endif
uint8_t i2c_transfer_buffer[20] = {0xFF};
// These buffers match the IS31FL3741 and IS31FL3741A PWM registers.
// The scaling buffers match the page 2 and 3 LED On/Off registers.
// Storing them like this is optimal for I2C transfers to the registers.
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3741_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[IS31FL3741_DRIVER_COUNT][IS31FL3741_PWM_REGISTER_COUNT];
bool g_pwm_buffer_update_required[IS31FL3741_DRIVER_COUNT] = {false};
bool g_scaling_registers_update_required[IS31FL3741_DRIVER_COUNT] = {false};
uint8_t g_scaling_registers[IS31FL3741_DRIVER_COUNT][IS31FL3741_PWM_REGISTER_COUNT];
void is31fl3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
i2c_transfer_buffer[0] = reg;
i2c_transfer_buffer[1] = data;
#if IS31FL3741_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT) == 0) break;
}
#else
i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT);
#endif
}
void is31fl3741_select_page(uint8_t addr, uint8_t page) {
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, page);
}
bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// Assume page 0 is already selected
for (int i = 0; i < 342; i += 18) {
if (i == 180) {
is31fl3741_select_page(addr, IS31FL3741_COMMAND_PWM_1);
}
i2c_transfer_buffer[0] = i % 180;
memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 18);
#if IS31FL3741_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, i2c_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(addr << 1, i2c_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
#endif
}
// transfer the left cause the total number is 351
i2c_transfer_buffer[0] = 162;
memcpy(i2c_transfer_buffer + 1, pwm_buffer + 342, 9);
#if IS31FL3741_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, i2c_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(addr << 1, i2c_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
return false;
}
#endif
return true;
}
void is31fl3741_init_drivers(void) {
i2c_init();
is31fl3741_init(IS31FL3741_I2C_ADDRESS_1);
#if defined(IS31FL3741_I2C_ADDRESS_2)
is31fl3741_init(IS31FL3741_I2C_ADDRESS_2);
# if defined(IS31FL3741_I2C_ADDRESS_3)
is31fl3741_init(IS31FL3741_I2C_ADDRESS_3);
# if defined(IS31FL3741_I2C_ADDRESS_4)
is31fl3741_init(IS31FL3741_I2C_ADDRESS_4);
# endif
# endif
#endif
for (int i = 0; i < IS31FL3741_LED_COUNT; i++) {
is31fl3741_set_led_control_register(i, true);
}
is31fl3741_update_led_control_registers(IS31FL3741_I2C_ADDRESS_1, 0);
#if defined(IS31FL3741_I2C_ADDRESS_2)
is31fl3741_update_led_control_registers(IS31FL3741_I2C_ADDRESS_2, 1);
# if defined(IS31FL3741_I2C_ADDRESS_3)
is31fl3741_update_led_control_registers(IS31FL3741_I2C_ADDRESS_3, 2);
# if defined(IS31FL3741_I2C_ADDRESS_4)
is31fl3741_update_led_control_registers(IS31FL3741_I2C_ADDRESS_4, 3);
# endif
# endif
#endif
}
void is31fl3741_init(uint8_t addr) {
// In order to avoid the LEDs being driven with garbage data
// in the LED driver's PWM registers, shutdown is enabled last.
// Set up the mode and other settings, clear the PWM registers,
// then disable software shutdown.
// Unlock the command register.
is31fl3741_select_page(addr, IS31FL3741_COMMAND_FUNCTION);
// Set to Normal operation
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_CONFIGURATION, IS31FL3741_CONFIGURATION);
// Set Golbal Current Control Register
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3741_GLOBAL_CURRENT);
// Set Pull up & Down for SWx CSy
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_PULLDOWNUP, ((IS31FL3741_CS_PULLDOWN << 4) | IS31FL3741_SW_PULLUP));
// Set PWM frequency
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_PWM_FREQUENCY, (IS31FL3741_PWM_FREQUENCY & 0b1111));
// is31fl3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
}
void is31fl3741_set_value(int index, uint8_t value) {
is31fl3741_led_t led;
if (index >= 0 && index < IS31FL3741_LED_COUNT) {
memcpy_P(&led, (&g_is31fl3741_leds[index]), sizeof(led));
if (g_pwm_buffer[led.driver][led.v] == value) {
return;
}
g_pwm_buffer_update_required[led.driver] = true;
g_pwm_buffer[led.driver][led.v] = value;
}
}
void is31fl3741_set_value_all(uint8_t value) {
for (int i = 0; i < IS31FL3741_LED_COUNT; i++) {
is31fl3741_set_value(i, value);
}
}
void is31fl3741_set_led_control_register(uint8_t index, bool value) {
is31fl3741_led_t led;
memcpy_P(&led, (&g_is31fl3741_leds[index]), sizeof(led));
if (value) {
g_scaling_registers[led.driver][led.v] = 0xFF;
} else {
g_scaling_registers[led.driver][led.v] = 0x00;
}
g_scaling_registers_update_required[led.driver] = true;
}
void is31fl3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
is31fl3741_select_page(addr, IS31FL3741_COMMAND_PWM_0);
is31fl3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
}
g_pwm_buffer_update_required[index] = false;
}
void is31fl3741_set_pwm_buffer(const is31fl3741_led_t *pled, uint8_t value) {
g_pwm_buffer[pled->driver][pled->v] = value;
g_pwm_buffer_update_required[pled->driver] = true;
}
void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_scaling_registers_update_required[index]) {
is31fl3741_select_page(addr, IS31FL3741_COMMAND_SCALING_0);
// CS1_SW1 to CS30_SW6 are on page 2
for (int i = CS1_SW1; i <= CS30_SW6; ++i) {
is31fl3741_write_register(addr, i, g_scaling_registers[index][i]);
}
is31fl3741_select_page(addr, IS31FL3741_COMMAND_SCALING_1);
// CS1_SW7 to CS39_SW9 are on page 3
for (int i = CS1_SW7; i <= CS39_SW9; ++i) {
is31fl3741_write_register(addr, i - CS1_SW7, g_scaling_registers[index][i]);
}
g_scaling_registers_update_required[index] = false;
}
}
void is31fl3741_set_scaling_registers(const is31fl3741_led_t *pled, uint8_t value) {
g_scaling_registers[pled->driver][pled->v] = value;
g_scaling_registers_update_required[pled->driver] = true;
}
void is31fl3741_flush(void) {
is31fl3741_update_pwm_buffers(IS31FL3741_I2C_ADDRESS_1, 0);
#if defined(IS31FL3741_I2C_ADDRESS_2)
is31fl3741_update_pwm_buffers(IS31FL3741_I2C_ADDRESS_2, 1);
# if defined(IS31FL3741_I2C_ADDRESS_3)
is31fl3741_update_pwm_buffers(IS31FL3741_I2C_ADDRESS_3, 2);
# if defined(IS31FL3741_I2C_ADDRESS_4)
is31fl3741_update_pwm_buffers(IS31FL3741_I2C_ADDRESS_4, 3);
# endif
# endif
#endif
}