From 232ab308e358e41f3253d66fa009c1ebca0951a2 Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 4 Sep 2012 13:29:21 +0900 Subject: usb_hid: workaround for compile on Windows. --- protocol/usb_hid/README | 10 ++++++++++ 1 file changed, 10 insertions(+) mode change 100644 => 100755 protocol/usb_hid/README (limited to 'protocol/usb_hid/README') diff --git a/protocol/usb_hid/README b/protocol/usb_hid/README old mode 100644 new mode 100755 index 5d49cc8d20..1357a4c726 --- a/protocol/usb_hid/README +++ b/protocol/usb_hid/README @@ -27,6 +27,11 @@ Restriction and Bug ------------------- Not statble yet. +Switching power on VBUS: + To power reset device. + http://www.circuitsathome.com/camera-control/simulating-cable-disconnect-on-usb-host-shield-2-0 + This is needed for a device which are not initilized with 'USB Bus Reset'(long SE0) + Can't bus-reset a keyboard which already attached on bus properly. Slow start up of Leonardo's bootloader causes this? Need to unplug/plug a keyboard after firmware starts up. @@ -34,3 +39,8 @@ Can't bus-reset a keyboard which already attached on bus properly. Keyboard with other endpoints than boot keyboard may go wrong. On my keyboard with mouse key the converter locks up when using mouse key function. + +Can't compile on Windows filesystem. + On Linux no problem. + Windows doesn't know difference between common/print.h and arduino/Print.h. + Change file name common/print.h to console.h ? -- cgit v1.2.3