From f6d56675f9f981c5464f0ca7a1fbb0162154e8c5 Mon Sep 17 00:00:00 2001 From: tmk Date: Wed, 13 May 2015 11:13:10 +0900 Subject: Squashed 'tmk_core/' changes from caca2c0..dc0e46e dc0e46e Rename LUFA to LUFA-git 3bfa7fa Remove LUFA-120730 215b764 Merge commit 'afa0f22a9299686fd88f58ce09c5b521ac917e8f' as 'protocol/lufa/LUFA' afa0f22 Squashed 'protocol/lufa/LUFA/' content from commit def7fca c0c42fa Remove submodule of LUFA 30f897d Merge commit '87ced33feb74e79c3281dda36eb6d6d153399b41' as 'protocol/usb_hid/USB_Host_Shield_2.0' 87ced33 Squashed 'protocol/usb_hid/USB_Host_Shield_2.0/' content from commit aab4a69 14f6d49 Remove submodule of USB_Host_Shield_2.0 git-subtree-dir: tmk_core git-subtree-split: dc0e46eaa4367d4e218f8816e3c117895820f07c --- protocol/lufa/LUFA-git | 1 - .../lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c | 75 + .../lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h | 58 + .../LUFA-git/Bootloaders/CDC/BootloaderAPITable.S | 91 + .../lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c | 641 ++++++ .../lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h | 144 ++ .../LUFA-git/Bootloaders/CDC/BootloaderCDC.txt | 240 ++ .../LUFA-git/Bootloaders/CDC/Config/AppConfig.h | 50 + .../LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h | 93 + .../lufa/LUFA-git/Bootloaders/CDC/Descriptors.c | 244 ++ .../lufa/LUFA-git/Bootloaders/CDC/Descriptors.h | 158 ++ .../Bootloaders/CDC/LUFA CDC Bootloader.inf | 66 + protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml | 161 ++ protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile | 2365 ++++++++++++++++++++ protocol/lufa/LUFA-git/Bootloaders/CDC/makefile | 55 + 15 files changed, 4441 insertions(+), 1 deletion(-) delete mode 160000 protocol/lufa/LUFA-git create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile create mode 100644 protocol/lufa/LUFA-git/Bootloaders/CDC/makefile (limited to 'protocol/lufa/LUFA-git/Bootloaders/CDC') diff --git a/protocol/lufa/LUFA-git b/protocol/lufa/LUFA-git deleted file mode 160000 index b6c18b2a7c..0000000000 --- a/protocol/lufa/LUFA-git +++ /dev/null @@ -1 +0,0 @@ -Subproject commit b6c18b2a7c544653efbe12a1d4e8ba65e7d83c35 diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c new file mode 100644 index 0000000000..f7564e9827 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.c @@ -0,0 +1,75 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Bootloader user application API functions. + */ + +#include "BootloaderAPI.h" + +void BootloaderAPI_ErasePage(const uint32_t Address) +{ + boot_page_erase_safe(Address); + boot_spm_busy_wait(); + boot_rww_enable(); +} + +void BootloaderAPI_WritePage(const uint32_t Address) +{ + boot_page_write_safe(Address); + boot_spm_busy_wait(); + boot_rww_enable(); +} + +void BootloaderAPI_FillWord(const uint32_t Address, const uint16_t Word) +{ + boot_page_fill_safe(Address, Word); +} + +uint8_t BootloaderAPI_ReadSignature(const uint16_t Address) +{ + return boot_signature_byte_get(Address); +} + +uint8_t BootloaderAPI_ReadFuse(const uint16_t Address) +{ + return boot_lock_fuse_bits_get(Address); +} + +uint8_t BootloaderAPI_ReadLock(void) +{ + return boot_lock_fuse_bits_get(GET_LOCK_BITS); +} + +void BootloaderAPI_WriteLock(const uint8_t LockBits) +{ + boot_lock_bits_set_safe(LockBits); +} diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h new file mode 100644 index 0000000000..2462cacdd0 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPI.h @@ -0,0 +1,58 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for BootloaderAPI.c. + */ + +#ifndef _BOOTLOADER_API_H_ +#define _BOOTLOADER_API_H_ + + /* Includes: */ + #include + #include + #include + + #include + + #include "Config/AppConfig.h" + + /* Function Prototypes: */ + void BootloaderAPI_ErasePage(const uint32_t Address); + void BootloaderAPI_WritePage(const uint32_t Address); + void BootloaderAPI_FillWord(const uint32_t Address, const uint16_t Word); + uint8_t BootloaderAPI_ReadSignature(const uint16_t Address); + uint8_t BootloaderAPI_ReadFuse(const uint16_t Address); + uint8_t BootloaderAPI_ReadLock(void); + void BootloaderAPI_WriteLock(const uint8_t LockBits); + +#endif + diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S new file mode 100644 index 0000000000..69ebd387a9 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderAPITable.S @@ -0,0 +1,91 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +; Trampolines to actual API implementations if the target address is outside the +; range of a rjmp instruction (can happen with large bootloader sections) +.section .apitable_trampolines, "ax" +.global BootloaderAPI_Trampolines +BootloaderAPI_Trampolines: + + BootloaderAPI_ErasePage_Trampoline: + jmp BootloaderAPI_ErasePage + BootloaderAPI_WritePage_Trampoline: + jmp BootloaderAPI_WritePage + BootloaderAPI_FillWord_Trampoline: + jmp BootloaderAPI_FillWord + BootloaderAPI_ReadSignature_Trampoline: + jmp BootloaderAPI_ReadSignature + BootloaderAPI_ReadFuse_Trampoline: + jmp BootloaderAPI_ReadFuse + BootloaderAPI_ReadLock_Trampoline: + jmp BootloaderAPI_ReadLock + BootloaderAPI_WriteLock_Trampoline: + jmp BootloaderAPI_WriteLock + BootloaderAPI_UNUSED1: + ret + BootloaderAPI_UNUSED2: + ret + BootloaderAPI_UNUSED3: + ret + BootloaderAPI_UNUSED4: + ret + BootloaderAPI_UNUSED5: + ret + + + +; API function jump table +.section .apitable_jumptable, "ax" +.global BootloaderAPI_JumpTable +BootloaderAPI_JumpTable: + + rjmp BootloaderAPI_ErasePage_Trampoline + rjmp BootloaderAPI_WritePage_Trampoline + rjmp BootloaderAPI_FillWord_Trampoline + rjmp BootloaderAPI_ReadSignature_Trampoline + rjmp BootloaderAPI_ReadFuse_Trampoline + rjmp BootloaderAPI_ReadLock_Trampoline + rjmp BootloaderAPI_WriteLock_Trampoline + rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1 + rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2 + rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3 + rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4 + rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5 + + + +; Bootloader table signatures and information +.section .apitable_signatures, "ax" +.global BootloaderAPI_Signatures +BootloaderAPI_Signatures: + + .long BOOT_START_ADDR ; Start address of the bootloader + .word 0xDF00 ; Signature for the CDC class bootloader + .word 0xDCFB ; Signature for a LUFA class bootloader diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c new file mode 100644 index 0000000000..f66a483e6e --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c @@ -0,0 +1,641 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the CDC class bootloader. This file contains the complete bootloader logic. + */ + +#define INCLUDE_FROM_BOOTLOADERCDC_C +#include "BootloaderCDC.h" + +/** Contains the current baud rate and other settings of the first virtual serial port. This must be retained as some + * operating systems will not open the port unless the settings can be set successfully. + */ +static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0, + .CharFormat = CDC_LINEENCODING_OneStopBit, + .ParityType = CDC_PARITY_None, + .DataBits = 8 }; + +/** Current address counter. This stores the current address of the FLASH or EEPROM as set by the host, + * and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued + * command.) + */ +static uint32_t CurrAddress; + +/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run + * via a watchdog reset. When cleared the bootloader will exit, starting the watchdog and entering an infinite + * loop until the AVR restarts and the application runs. + */ +static bool RunBootloader = true; + +/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader + * will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held + * low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value + * \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start. + */ +uint16_t MagicBootKey ATTR_NO_INIT; + + +/** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application + * start key has been loaded into \ref MagicBootKey. If the bootloader started via the watchdog and the key is valid, + * this will force the user application to start via a software jump. + */ +void Application_Jump_Check(void) +{ + bool JumpToApplication = false; + + #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + /* Disable JTAG debugging */ + JTAG_DISABLE(); + + /* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */ + PORTF |= (1 << 4); + Delay_MS(10); + + /* If the TCK pin is not jumpered to ground, start the user application instead */ + JumpToApplication |= ((PINF & (1 << 4)) != 0); + + /* Re-enable JTAG debugging */ + JTAG_ENABLE(); + #endif + + /* If the reset source was the bootloader and the key is correct, clear it and jump to the application */ + if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY)) + JumpToApplication |= true; + + /* If a request has been made to jump to the user application, honor it */ + if (JumpToApplication) + { + /* Turn off the watchdog */ + MCUSR &= ~(1< 0xFFFF) + WriteNextResponseByte(pgm_read_byte_far(CurrAddress | HighByte)); + #else + WriteNextResponseByte(pgm_read_byte(CurrAddress | HighByte)); + #endif + + /* If both bytes in current word have been read, increment the address counter */ + if (HighByte) + CurrAddress += 2; + + HighByte = !HighByte; + } + else + { + /* Read the next EEPROM byte into the endpoint */ + WriteNextResponseByte(eeprom_read_byte((uint8_t*)(intptr_t)(CurrAddress >> 1))); + + /* Increment the address counter after use */ + CurrAddress += 2; + } + } + } + else + { + uint32_t PageStartAddress = CurrAddress; + + if (MemoryType == MEMORY_TYPE_FLASH) + { + boot_page_erase(PageStartAddress); + boot_spm_busy_wait(); + } + + while (BlockSize--) + { + if (MemoryType == MEMORY_TYPE_FLASH) + { + /* If both bytes in current word have been written, increment the address counter */ + if (HighByte) + { + /* Write the next FLASH word to the current FLASH page */ + boot_page_fill(CurrAddress, ((FetchNextCommandByte() << 8) | LowByte)); + + /* Increment the address counter after use */ + CurrAddress += 2; + } + else + { + LowByte = FetchNextCommandByte(); + } + + HighByte = !HighByte; + } + else + { + /* Write the next EEPROM byte from the endpoint */ + eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte()); + + /* Increment the address counter after use */ + CurrAddress += 2; + } + } + + /* If in FLASH programming mode, commit the page after writing */ + if (MemoryType == MEMORY_TYPE_FLASH) + { + /* Commit the flash page to memory */ + boot_page_write(PageStartAddress); + + /* Wait until write operation has completed */ + boot_spm_busy_wait(); + } + + /* Send response byte back to the host */ + WriteNextResponseByte('\r'); + } +} +#endif + +/** Retrieves the next byte from the host in the CDC data OUT endpoint, and clears the endpoint bank if needed + * to allow reception of the next data packet from the host. + * + * \return Next received byte from the host in the CDC data OUT endpoint + */ +static uint8_t FetchNextCommandByte(void) +{ + /* Select the OUT endpoint so that the next data byte can be read */ + Endpoint_SelectEndpoint(CDC_RX_EPADDR); + + /* If OUT endpoint empty, clear it and wait for the next packet from the host */ + while (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearOUT(); + + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return 0; + } + } + + /* Fetch the next byte from the OUT endpoint */ + return Endpoint_Read_8(); +} + +/** Writes the next response byte to the CDC data IN endpoint, and sends the endpoint back if needed to free up the + * bank when full ready for the next byte in the packet to the host. + * + * \param[in] Response Next response byte to send to the host + */ +static void WriteNextResponseByte(const uint8_t Response) +{ + /* Select the IN endpoint so that the next data byte can be written */ + Endpoint_SelectEndpoint(CDC_TX_EPADDR); + + /* If IN endpoint full, clear it and wait until ready for the next packet to the host */ + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearIN(); + + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + } + + /* Write the next byte to the IN endpoint */ + Endpoint_Write_8(Response); +} + +/** Task to read in AVR109 commands from the CDC data OUT endpoint, process them, perform the required actions + * and send the appropriate response back to the host. + */ +static void CDC_Task(void) +{ + /* Select the OUT endpoint */ + Endpoint_SelectEndpoint(CDC_RX_EPADDR); + + /* Check if endpoint has a command in it sent from the host */ + if (!(Endpoint_IsOUTReceived())) + return; + + /* Read in the bootloader command (first byte sent from host) */ + uint8_t Command = FetchNextCommandByte(); + + if (Command == AVR109_COMMAND_ExitBootloader) + { + RunBootloader = false; + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if ((Command == AVR109_COMMAND_SetLED) || (Command == AVR109_COMMAND_ClearLED) || + (Command == AVR109_COMMAND_SelectDeviceType)) + { + FetchNextCommandByte(); + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if ((Command == AVR109_COMMAND_EnterProgrammingMode) || (Command == AVR109_COMMAND_LeaveProgrammingMode)) + { + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if (Command == AVR109_COMMAND_ReadPartCode) + { + /* Return ATMEGA128 part code - this is only to allow AVRProg to use the bootloader */ + WriteNextResponseByte(0x44); + WriteNextResponseByte(0x00); + } + else if (Command == AVR109_COMMAND_ReadAutoAddressIncrement) + { + /* Indicate auto-address increment is supported */ + WriteNextResponseByte('Y'); + } + else if (Command == AVR109_COMMAND_SetCurrentAddress) + { + /* Set the current address to that given by the host (translate 16-bit word address to byte address) */ + CurrAddress = (FetchNextCommandByte() << 9); + CurrAddress |= (FetchNextCommandByte() << 1); + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if (Command == AVR109_COMMAND_ReadBootloaderInterface) + { + /* Indicate serial programmer back to the host */ + WriteNextResponseByte('S'); + } + else if (Command == AVR109_COMMAND_ReadBootloaderIdentifier) + { + /* Write the 7-byte software identifier to the endpoint */ + for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++) + WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]); + } + else if (Command == AVR109_COMMAND_ReadBootloaderSWVersion) + { + WriteNextResponseByte('0' + BOOTLOADER_VERSION_MAJOR); + WriteNextResponseByte('0' + BOOTLOADER_VERSION_MINOR); + } + else if (Command == AVR109_COMMAND_ReadSignature) + { + WriteNextResponseByte(AVR_SIGNATURE_3); + WriteNextResponseByte(AVR_SIGNATURE_2); + WriteNextResponseByte(AVR_SIGNATURE_1); + } + else if (Command == AVR109_COMMAND_EraseFLASH) + { + /* Clear the application section of flash */ + for (uint32_t CurrFlashAddress = 0; CurrFlashAddress < (uint32_t)BOOT_START_ADDR; CurrFlashAddress += SPM_PAGESIZE) + { + boot_page_erase(CurrFlashAddress); + boot_spm_busy_wait(); + boot_page_write(CurrFlashAddress); + boot_spm_busy_wait(); + } + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + #if !defined(NO_LOCK_BYTE_WRITE_SUPPORT) + else if (Command == AVR109_COMMAND_WriteLockbits) + { + /* Set the lock bits to those given by the host */ + boot_lock_bits_set(FetchNextCommandByte()); + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + #endif + else if (Command == AVR109_COMMAND_ReadLockbits) + { + WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS)); + } + else if (Command == AVR109_COMMAND_ReadLowFuses) + { + WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS)); + } + else if (Command == AVR109_COMMAND_ReadHighFuses) + { + WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS)); + } + else if (Command == AVR109_COMMAND_ReadExtendedFuses) + { + WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS)); + } + #if !defined(NO_BLOCK_SUPPORT) + else if (Command == AVR109_COMMAND_GetBlockWriteSupport) + { + WriteNextResponseByte('Y'); + + /* Send block size to the host */ + WriteNextResponseByte(SPM_PAGESIZE >> 8); + WriteNextResponseByte(SPM_PAGESIZE & 0xFF); + } + else if ((Command == AVR109_COMMAND_BlockWrite) || (Command == AVR109_COMMAND_BlockRead)) + { + /* Delegate the block write/read to a separate function for clarity */ + ReadWriteMemoryBlock(Command); + } + #endif + #if !defined(NO_FLASH_BYTE_SUPPORT) + else if (Command == AVR109_COMMAND_FillFlashPageWordHigh) + { + /* Write the high byte to the current flash page */ + boot_page_fill(CurrAddress, FetchNextCommandByte()); + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if (Command == AVR109_COMMAND_FillFlashPageWordLow) + { + /* Write the low byte to the current flash page */ + boot_page_fill(CurrAddress | 0x01, FetchNextCommandByte()); + + /* Increment the address */ + CurrAddress += 2; + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if (Command == AVR109_COMMAND_WriteFlashPage) + { + /* Commit the flash page to memory */ + boot_page_write(CurrAddress); + + /* Wait until write operation has completed */ + boot_spm_busy_wait(); + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if (Command == AVR109_COMMAND_ReadFLASHWord) + { + #if (FLASHEND > 0xFFFF) + uint16_t ProgramWord = pgm_read_word_far(CurrAddress); + #else + uint16_t ProgramWord = pgm_read_word(CurrAddress); + #endif + + WriteNextResponseByte(ProgramWord >> 8); + WriteNextResponseByte(ProgramWord & 0xFF); + } + #endif + #if !defined(NO_EEPROM_BYTE_SUPPORT) + else if (Command == AVR109_COMMAND_WriteEEPROM) + { + /* Read the byte from the endpoint and write it to the EEPROM */ + eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte()); + + /* Increment the address after use */ + CurrAddress += 2; + + /* Send confirmation byte back to the host */ + WriteNextResponseByte('\r'); + } + else if (Command == AVR109_COMMAND_ReadEEPROM) + { + /* Read the EEPROM byte and write it to the endpoint */ + WriteNextResponseByte(eeprom_read_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)))); + + /* Increment the address after use */ + CurrAddress += 2; + } + #endif + else if (Command != AVR109_COMMAND_Sync) + { + /* Unknown (non-sync) command, return fail code */ + WriteNextResponseByte('?'); + } + + /* Select the IN endpoint */ + Endpoint_SelectEndpoint(CDC_TX_EPADDR); + + /* Remember if the endpoint is completely full before clearing it */ + bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed()); + + /* Send the endpoint data to the host */ + Endpoint_ClearIN(); + + /* If a full endpoint's worth of data was sent, we need to send an empty packet afterwards to signal end of transfer */ + if (IsEndpointFull) + { + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearIN(); + } + + /* Wait until the data has been sent to the host */ + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + /* Select the OUT endpoint */ + Endpoint_SelectEndpoint(CDC_RX_EPADDR); + + /* Acknowledge the command from the host */ + Endpoint_ClearOUT(); +} + diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h new file mode 100644 index 0000000000..9b326abc39 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.h @@ -0,0 +1,144 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for BootloaderCDC.c. + */ + +#ifndef _CDC_H_ +#define _CDC_H_ + + /* Includes: */ + #include + #include + #include + #include + #include + #include + #include + + #include "Descriptors.h" + #include "BootloaderAPI.h" + #include "Config/AppConfig.h" + + #include + #include + #include + + /* Preprocessor Checks: */ + #if !defined(__OPTIMIZE_SIZE__) + #error This bootloader requires that it be optimized for size, not speed, to fit into the target device. Change optimization settings and try again. + #endif + + /* Macros: */ + /** Version major of the CDC bootloader. */ + #define BOOTLOADER_VERSION_MAJOR 0x01 + + /** Version minor of the CDC bootloader. */ + #define BOOTLOADER_VERSION_MINOR 0x00 + + /** Hardware version major of the CDC bootloader. */ + #define BOOTLOADER_HWVERSION_MAJOR 0x01 + + /** Hardware version minor of the CDC bootloader. */ + #define BOOTLOADER_HWVERSION_MINOR 0x00 + + /** Eight character bootloader firmware identifier reported to the host when requested. */ + #define SOFTWARE_IDENTIFIER "LUFACDC" + + /** Magic bootloader key to unlock forced application start mode. */ + #define MAGIC_BOOT_KEY 0xDC42 + + /* Enums: */ + /** Possible memory types that can be addressed via the bootloader. */ + enum AVR109_Memories + { + MEMORY_TYPE_FLASH = 'F', + MEMORY_TYPE_EEPROM = 'E', + }; + + /** Possible commands that can be issued to the bootloader. */ + enum AVR109_Commands + { + AVR109_COMMAND_Sync = 27, + AVR109_COMMAND_ReadEEPROM = 'd', + AVR109_COMMAND_WriteEEPROM = 'D', + AVR109_COMMAND_ReadFLASHWord = 'R', + AVR109_COMMAND_WriteFlashPage = 'm', + AVR109_COMMAND_FillFlashPageWordLow = 'c', + AVR109_COMMAND_FillFlashPageWordHigh = 'C', + AVR109_COMMAND_GetBlockWriteSupport = 'b', + AVR109_COMMAND_BlockWrite = 'B', + AVR109_COMMAND_BlockRead = 'g', + AVR109_COMMAND_ReadExtendedFuses = 'Q', + AVR109_COMMAND_ReadHighFuses = 'N', + AVR109_COMMAND_ReadLowFuses = 'F', + AVR109_COMMAND_ReadLockbits = 'r', + AVR109_COMMAND_WriteLockbits = 'l', + AVR109_COMMAND_EraseFLASH = 'e', + AVR109_COMMAND_ReadSignature = 's', + AVR109_COMMAND_ReadBootloaderSWVersion = 'V', + AVR109_COMMAND_ReadBootloaderHWVersion = 'v', + AVR109_COMMAND_ReadBootloaderIdentifier = 'S', + AVR109_COMMAND_ReadBootloaderInterface = 'p', + AVR109_COMMAND_SetCurrentAddress = 'A', + AVR109_COMMAND_ReadAutoAddressIncrement = 'a', + AVR109_COMMAND_ReadPartCode = 't', + AVR109_COMMAND_EnterProgrammingMode = 'P', + AVR109_COMMAND_LeaveProgrammingMode = 'L', + AVR109_COMMAND_SelectDeviceType = 'T', + AVR109_COMMAND_SetLED = 'x', + AVR109_COMMAND_ClearLED = 'y', + AVR109_COMMAND_ExitBootloader = 'E', + }; + + /* Type Defines: */ + /** Type define for a non-returning pointer to the start of the loaded application in flash memory. */ + typedef void (*AppPtr_t)(void) ATTR_NO_RETURN; + + /* Function Prototypes: */ + static void CDC_Task(void); + static void SetupHardware(void); + + void Application_Jump_Check(void) ATTR_INIT_SECTION(3); + + void EVENT_USB_Device_ConfigurationChanged(void); + + #if defined(INCLUDE_FROM_BOOTLOADERCDC_C) || defined(__DOXYGEN__) + #if !defined(NO_BLOCK_SUPPORT) + static void ReadWriteMemoryBlock(const uint8_t Command); + #endif + static uint8_t FetchNextCommandByte(void); + static void WriteNextResponseByte(const uint8_t Response); + #endif + +#endif + diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt new file mode 100644 index 0000000000..55e5e55a45 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.txt @@ -0,0 +1,240 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage CDC Class USB AVR Bootloader + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Supported USB Speeds:Full Speed Mode
+ * + * \section Sec_Description Project Description: + * + * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109 + * protocol compatible programming software to load firmware onto the AVR. + * + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to + * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. + * + * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the + * bootloader from the normal user application. + * + * \warning THIS BOOTLOADER IS NOT SECURE. Malicious entities can recover written data, even if the device + * lockbits are set. + * + * \section Sec_Running Running the Bootloader + * + * This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device + * datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST + * fuse is cleared. + * + * For board specific exceptions to the above, see below. + * + * \subsection SSec_XPLAIN Atmel Xplain Board + * Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the + * \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. + * + * \subsection SSec_Leonardo Arduino Leonardo Board + * Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the + * \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. + * + * \section Sec_Installation Driver Installation + * + * After running this bootloader for the first time on a new computer, you will need to supply the .INF + * file located in this bootloader project's directory as the device's driver when running under Windows. + * This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the + * device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers. + * + * \section Sec_HostApp Host Controller Application + * + * This bootloader is compatible with the open source application AVRDUDE, Atmel's AVRPROG, or other + * applications implementing the AVR109 protocol, which is documented on the Atmel website as an application + * note. + * + * \subsection SSec_AVRDude AVRDUDE (Windows, Mac, Linux) + * + * AVRDude is a free, cross-platform and open source command line programmer for Atmel and third party AVR + * programmers. It is available on the the Windows platform as part of the "WinAVR" package, or on other systems + * either from a build from the official source code, or in many distributions as a precompiled binary package. + * + * To load a new HEX file with AVRDude, specify "AVR109" as the programmer, with the allocated COM port. On Windows + * platforms this will be a COMx port name: + * \code + * avrdude -c AVR109 -p at90usb1287 -P COM0 -U flash:w:Mouse.hex + * \endcode + * + * On Linux systems, this will typically be a /dev/ttyACMx port name: + * \code + * avrdude -c AVR109 -p at90usb1287 -P /dev/ttyACM0 -U flash:w:Mouse.hex + * \endcode + * + * Refer to the AVRDude project documentation for additional usage instructions. + * + * \section Sec_API User Application API + * + * Several user application functions for FLASH and other special memory area manipulations are exposed by the bootloader, + * allowing the user application to call into the bootloader at runtime to read and write FLASH data. + * + * By default, the bootloader API jump table is located 32 bytes from the end of the device's FLASH memory, and follows the + * following layout: + * + * \code + * #define BOOTLOADER_API_TABLE_SIZE 32 + * #define BOOTLOADER_API_TABLE_START ((FLASHEND + 1UL) - BOOTLOADER_API_TABLE_SIZE) + * #define BOOTLOADER_API_CALL(Index) (void*)((BOOTLOADER_API_TABLE_START + (Index * 2)) / 2) + * + * void (*BootloaderAPI_ErasePage)(uint32_t Address) = BOOTLOADER_API_CALL(0); + * void (*BootloaderAPI_WritePage)(uint32_t Address) = BOOTLOADER_API_CALL(1); + * void (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2); + * uint8_t (*BootloaderAPI_ReadSignature)(uint16_t Address) = BOOTLOADER_API_CALL(3); + * uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address) = BOOTLOADER_API_CALL(4); + * uint8_t (*BootloaderAPI_ReadLock)(void) = BOOTLOADER_API_CALL(5); + * void (*BootloaderAPI_WriteLock)(uint8_t LockBits) = BOOTLOADER_API_CALL(6); + * + * #define BOOTLOADER_MAGIC_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 2)) + * #define BOOTLOADER_MAGIC_SIGNATURE 0xDCFB + * + * #define BOOTLOADER_CLASS_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4)) + * #define BOOTLOADER_CDC_SIGNATURE 0xDF00 + * + * #define BOOTLOADER_ADDRESS_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8)) + * #define BOOTLOADER_ADDRESS_LENGTH 4 + * \endcode + * + * From the application the API support of the bootloader can be detected by reading the FLASH memory bytes located at address + * \c BOOTLOADER_MAGIC_SIGNATURE_START and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader + * can be determined by reading the FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them + * to the value \c BOOTLOADER_CDC_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes of FLASH + * memory starting from address \c BOOTLOADER_ADDRESS_START. + * + * \subsection SSec_API_MemLayout Device Memory Map + * The following illustration indicates the final memory map of the device when loaded with the bootloader. + * + * \verbatim + * +----------------------------+ 0x0000 + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | User Application | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE + * | | + * | Bootloader Application | + * | (Not User App. Accessible) | + * | | + * +----------------------------+ FLASHEND - 96 + * | API Table Trampolines | + * | (Not User App. Accessible) | + * +----------------------------+ FLASHEND - 32 + * | Bootloader API Table | + * | (User App. Accessible) | + * +----------------------------+ FLASHEND - 8 + * | Bootloader ID Constants | + * | (User App. Accessible) | + * +----------------------------+ FLASHEND + * \endverbatim + * + * \section Sec_KnownIssues Known Issues: + * + * \par On Linux machines, the CDC bootloader is unstable or inaccessible. + * A change to the \c ModemManager module in many Linux distributions causes + * this module to try to take control over inserted CDC devices, corrupting the + * datastream. A UDEV rule is required to prevent this. + * See here for resolution steps. + * If the issue still persists then uninstall modemmanager by executing sudo apt-get remove modemmanager, or + * the equivalent using your chosen distribution's package manager. + * + * \par On Linux machines, the CDC bootloader is inaccessible. + * On many Linux systems, non-root users do not have automatic access to newly + * inserted CDC devices. Root privileges or a UDEV rule is required to gain + * access. + * See here for resolution steps. + * + * \par After loading an application, it is not run automatically on startup. + * Some USB AVR boards ship with the BOOTRST fuse set, causing the bootloader + * to run automatically when the device is reset. In most cases, the BOOTRST + * fuse should be disabled and the HWBE fuse used instead to run the bootloader + * when needed. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
Define Name:Location:Description:
NO_BLOCK_SUPPORTAppConfig.hDefine to disable memory block read/write support in the bootloader, requiring all reads and writes to be made + * using the byte-level commands.
NO_EEPROM_BYTE_SUPPORTAppConfig.hDefine to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes + * to be made using the block-level commands.
NO_FLASH_BYTE_SUPPORTAppConfig.hDefine to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes + * to be made using the block-level commands.
NO_LOCK_BYTE_WRITE_SUPPORTAppConfig.hDefine to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.
+ */ + diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h b/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h new file mode 100644 index 0000000000..bbb5cb227e --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + +// #define NO_BLOCK_SUPPORT +// #define NO_EEPROM_BYTE_SUPPORT +// #define NO_FLASH_BYTE_SUPPORT +// #define NO_LOCK_BYTE_WRITE_SUPPORT + +#endif diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h b/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h new file mode 100644 index 0000000000..af2dd3060e --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c b/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c new file mode 100644 index 0000000000..2ff6b503ba --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.c @@ -0,0 +1,244 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/** Device descriptor structure. This descriptor, located in SRAM memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(1,1,0), + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_NoSpecificSubclass, + .Protocol = CDC_CSCP_NoSpecificProtocol, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, + .ProductID = 0x204A, + .ReleaseNumber = VERSION_BCD(1,0,0), + + .ManufacturerStrIndex = STRING_ID_Manufacturer, + .ProductStrIndex = STRING_ID_Product, + .SerialNumStrIndex = NO_DESCRIPTOR, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in SRAM memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 2, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .CDC_CCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_CDC_CCI, + .AlternateSetting = 0, + + .TotalEndpoints = 1, + + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_ACMSubclass, + .Protocol = CDC_CSCP_ATCommandProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_Functional_Header = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, + .Subtype = 0x00, + + .CDCSpecification = VERSION_BCD(1,1,0), + }, + + .CDC_Functional_ACM = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, + .Subtype = 0x02, + + .Capabilities = 0x02, + }, + + .CDC_Functional_Union = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, + .Subtype = 0x06, + + .MasterInterfaceNumber = INTERFACE_ID_CDC_CCI, + .SlaveInterfaceNumber = INTERFACE_ID_CDC_DCI, + }, + + .CDC_NotificationEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_NOTIFICATION_EPADDR, + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_NOTIFICATION_EPSIZE, + .PollingIntervalMS = 0xFF + }, + + .CDC_DCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_CDC_DCI, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = CDC_CSCP_CDCDataClass, + .SubClass = CDC_CSCP_NoDataSubclass, + .Protocol = CDC_CSCP_NoDataProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_RX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .CDC_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_TX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + } +}; + +/** Language descriptor structure. This descriptor, located in SRAM memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC"); + +/** This function is called by the library when in device mode, and must be overridden (see LUFA library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + if (DescriptorNumber == STRING_ID_Language) + { + Address = &LanguageString; + Size = LanguageString.Header.Size; + } + else if (DescriptorNumber == STRING_ID_Manufacturer) + { + Address = &ManufacturerString; + Size = ManufacturerString.Header.Size; + } + else if (DescriptorNumber == STRING_ID_Product) + { + Address = &ProductString; + Size = ProductString.Header.Size; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h b/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h new file mode 100644 index 0000000000..ef04379179 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/Descriptors.h @@ -0,0 +1,158 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include + + #include "Config/AppConfig.h" + + /* Macros: */ + #if defined(__AVR_AT90USB1287__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x97 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_AT90USB647__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x96 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_AT90USB1286__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x97 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_AT90USB646__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x96 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_ATmega32U4__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x95 + #define AVR_SIGNATURE_3 0x87 + #elif defined(__AVR_ATmega16U4__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x94 + #define AVR_SIGNATURE_3 0x88 + #elif defined(__AVR_ATmega32U2__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x95 + #define AVR_SIGNATURE_3 0x8A + #elif defined(__AVR_ATmega16U2__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x94 + #define AVR_SIGNATURE_3 0x89 + #elif defined(__AVR_AT90USB162__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x94 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_ATmega8U2__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x93 + #define AVR_SIGNATURE_3 0x89 + #elif defined(__AVR_AT90USB82__) + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x94 + #define AVR_SIGNATURE_3 0x82 + #else + #error The selected AVR part is not currently supported by this bootloader. + #endif + + /** Endpoint address for the CDC control interface event notification endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) + + /** Endpoint address for the CDC data interface TX (data IN) endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) + + /** Endpoint address for the CDC data interface RX (data OUT) endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) + + /** Size of the CDC data interface TX and RX data endpoint banks, in bytes. */ + #define CDC_TXRX_EPSIZE 16 + + /** Size of the CDC control interface notification endpoint bank, in bytes. */ + #define CDC_NOTIFICATION_EPSIZE 8 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // CDC Control Interface + USB_Descriptor_Interface_t CDC_CCI_Interface; + USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header; + USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM; + USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union; + USB_Descriptor_Endpoint_t CDC_NotificationEndpoint; + + // CDC Data Interface + USB_Descriptor_Interface_t CDC_DCI_Interface; + USB_Descriptor_Endpoint_t CDC_DataOutEndpoint; + USB_Descriptor_Endpoint_t CDC_DataInEndpoint; + } USB_Descriptor_Configuration_t; + + /** Enum for the device interface descriptor IDs within the device. Each interface descriptor + * should have a unique ID index associated with it, which can be used to refer to the + * interface from other descriptors. + */ + enum InterfaceDescriptors_t + { + INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */ + INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */ + }; + + /** Enum for the device string descriptor IDs within the device. Each string descriptor should + * have a unique ID index associated with it, which can be used to refer to the string from + * other descriptors. + */ + enum StringDescriptors_t + { + STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ + STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ + STRING_ID_Product = 2, /**< Product string ID */ + }; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif + diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf b/protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf new file mode 100644 index 0000000000..61624c7318 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/LUFA CDC Bootloader.inf @@ -0,0 +1,66 @@ +;************************************************************ +; Windows USB CDC ACM Setup File +; Copyright (c) 2000 Microsoft Corporation +;************************************************************ + +[DefaultInstall] +CopyINF="LUFA CDC Bootloader.inf" + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%MFGNAME% +DriverVer=7/1/2012,10.0.0.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64 + +[SourceDisksNames] + +[SourceDisksFiles] + +[DestinationDirs] +DefaultDestDir=12 + +[DriverInstall] +Include=mdmcpq.inf +CopyFiles=FakeModemCopyFileSection +AddReg=DriverInstall.AddReg + +[DriverInstall.Services] +Include=mdmcpq.inf +AddService=usbser, 0x00000002, LowerFilter_Service_Inst + +[DriverInstall.AddReg] +HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider" + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A + +[DeviceList.NTx86] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A + +[DeviceList.NTia64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGNAME="http://www.lufa-lib.org" +DESCRIPTION="LUFA CDC Class Bootloader" diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml b/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml new file mode 100644 index 0000000000..72f3ff04c7 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml @@ -0,0 +1,161 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile b/protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile new file mode 100644 index 0000000000..2dfb2a08a6 --- /dev/null +++ b/protocol/lufa/LUFA-git/Bootloaders/CDC/doxyfile @@ -0,0 +1,2365 @@ +# Doxyfile 1.8.8 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "LUFA Library - CDC Class Bootloader" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify an logo or icon that is included in +# the documentation. The maximum height of the logo should not exceed 55 pixels +# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo +# to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./Documentation/ + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a +# new page for each member. If set to NO, the documentation of a member will be +# part of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = NO + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO these classes will be included in the various overviews. This option has +# no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the +# todo list. This list is created by putting \todo commands in the +# documentation. +# The default value is: YES. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the +# test list. This list is created by putting \test commands in the +# documentation. +# The default value is: YES. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = NO + +# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if ... \endif and \cond +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES the list +# will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO doxygen will only warn about wrong or incomplete parameter +# documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = *.h \ + *.c \ + *.txt + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = Documentation/ + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = __* \ + INCLUDE_FROM_* + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# +# +# where is the value of the INPUT_FILTER tag, and is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER ) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES, then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = NO + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# compiled with the --with-libclang option. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefor more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra stylesheet files is of importance (e.g. the last +# stylesheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the stylesheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = YES + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler ( hhc.exe). If non-empty +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated ( +# YES) or that it should be included in the master .chm file ( NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated ( +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = YES + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = YES + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 1 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using prerendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use + S +# (what the is depends on the OS and browser, but it is typically +# , /