From 821563417565776d2dc3a02b0265e6fcd5218739 Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 11 Feb 2013 22:57:40 +0900 Subject: Now includes LUFA-120730 in repository --- protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h | 418 +++++++++++++++++++++++ 1 file changed, 418 insertions(+) create mode 100644 protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h (limited to 'protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h') diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h new file mode 100644 index 0000000000..66f0fd3c0a --- /dev/null +++ b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h @@ -0,0 +1,418 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Master include file for the library USB functionality. + * + * Master include file for the library USB functionality. + * + * This file should be included in all user projects making use of the USB portions of the library, instead of + * the individual USB driver submodule headers. + */ + +/** \defgroup Group_USB USB Core - LUFA/Drivers/USB/USB.h + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Drivers/USB/Core/ConfigDescriptors.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/DeviceStandardReq.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/Events.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/HostStandardReq.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/USBTask.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/Device_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/Endpoint_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/EndpointStream_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/Host_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/Pipe_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/PipeStream_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/USBController_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Core/ARCH/USBInterrupt_ARCH.c (Makefile source module name: LUFA_SRC_USB) + * - LUFA/Drivers/USB/Class/Common/HIDParser.c (Makefile source module name: LUFA_SRC_USB) + * + * \section Sec_ModDescription Module Description + * Driver and framework for the USB controller of the selected architecture and microcontroller model. This module + * consists of many submodules, and is designed to provide an easy way to configure and control USB host, device + * or OTG mode USB applications. + * + * The USB stack requires the sole control over the USB controller in the microcontroller only; i.e. it does not + * require any additional timers or other peripherals to operate. This ensures that the USB stack requires as few + * resources as possible. + * + * The USB stack can be used in Device Mode for connections to USB Hosts (see \ref Group_Device), in Host mode for + * hosting of other USB devices (see \ref Group_Host), or as a dual role device which can either act as a USB host + * or device depending on what peripheral is connected (see \ref Group_OTG). Both modes also require a common set + * of USB management functions found \ref Group_USBManagement. + */ + +/** \defgroup Group_USBClassDrivers USB Class Drivers + * + * Drivers for both host and device mode of the standard USB classes, for rapid application development. + * Class drivers give a framework which sits on top of the low level library API, allowing for standard + * USB classes to be implemented in a project with minimal user code. These drivers can be used in + * conjunction with the library low level APIs to implement interfaces both via the class drivers and via + * the standard library APIs. + * + * Multiple device mode class drivers can be used within a project, including multiple instances of the + * same class driver. In this way, USB Hosts and Devices can be made quickly using the internal class drivers + * so that more time and effort can be put into the end application instead of the USB protocol. + * + * The available class drivers and their modes are listed below. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * +* + * + * + * + * + * + * + * + * + * + * + * + *
USB ClassDevice ModeHost Mode
Android Open AccessoryNoYes
Audio 1.0YesYes
CDC-ACMYesYes
HIDYesYes
MIDIYesYes
Mass StorageYesYes
PrinterNoYes
RNDISYesYes
Still ImageNoYes
+ * + * + * \section Sec_UsingClassDrivers Using the Class Drivers + * To make the Class drivers easy to integrate into a user application, they all implement a standardized + * design with similarly named/used function, enums, defines and types. The two different modes are implemented + * slightly differently, and thus will be explained separately. For information on a specific class driver, read + * the class driver's module documentation. + * + * \subsection Sec_ClassDriverDevice Device Mode Class Drivers + * Implementing a Device Mode Class Driver in a user application requires a number of steps to be followed. Firstly, + * the module configuration and state structure must be added to the project source. These structures are named in a + * similar manner between classes, that of USB_ClassInfo_{Class Name}_Device_t, and are used to hold the + * complete state and configuration for each class instance. Multiple class instances is where the power of the class + * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's \c USB_ClassInfo_* + * structure. + * + * Inside the ClassInfo structure lies two sections, a \c Config section, and a \c State section. The \c Config + * section contains the instance's configuration parameters, and must have all fields set by the user application + * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters + * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters. + * + * The following is an example of a properly initialized instance of the Audio Class Driver structure: + * + * \code + * USB_ClassInfo_Audio_Device_t My_Audio_Interface = + * { + * .Config = + * { + * .StreamingInterfaceNumber = 1, + * .DataINEndpoint = + * { + * .Address = (ENDPOINT_DIR_IN | 1), + * .Size = 64, + * .Banks = 1, + * }, + * }, + * }; + * \endcode + * + * \note The class driver's configuration parameters should match those used in the device's descriptors that are + * sent to the host. + * + * To initialize the Class driver instance, the driver's {Class Name}_Device_ConfigureEndpoints() function + * should be called in response to the \ref EVENT_USB_Device_ConfigurationChanged() event. This function will return a + * boolean true value if the driver successfully initialized the instance. Like all the class driver functions, this function + * takes in the address of the specific instance you wish to initialize - in this manner, multiple separate instances of + * the same class type can be initialized like this: + * + * \code + * void EVENT_USB_Device_ConfigurationChanged(void) + * { + * LEDs_SetAllLEDs(LEDMASK_USB_READY); + * + * if (!(Audio_Device_ConfigureEndpoints(&My_Audio_Interface))) + * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + * } + * \endcode + * + * Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's + * {Class Name}_Device_USBTask() function in the main program loop. The exact implementation of this + * function varies between class drivers, and can be used for any internal class driver purpose to maintain each + * instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each + * separate instance, just like the main USB maintenance routine \ref USB_USBTask(): + * + * \code + * int main(void) + * { + * SetupHardware(); + * + * LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + * + * for (;;) + * { + * if (USB_DeviceState != DEVICE_STATE_Configured) + * Create_And_Process_Samples(); + * + * Audio_Device_USBTask(&My_Audio_Interface); + * USB_USBTask(); + * } + * } + * \endcode + * + * The final standardized Device Class Driver function is the Control Request handler function + * {Class Name}_Device_ProcessControlRequest(), which should be called when the + * \ref EVENT_USB_Device_ControlRequest() event fires. This function should also be called for + * each class driver instance, using the address of the instance to operate on as the function's + * parameter. The request handler will abort if it is determined that the current request is not + * targeted at the given class driver instance, thus these methods can safely be called + * one-after-another in the event handler with no form of error checking: + * + * \code + * void EVENT_USB_Device_ControlRequest(void) + * { + * Audio_Device_ProcessControlRequest(&My_Audio_Interface); + * } + * \endcode + * + * Each class driver may also define a set of callback functions (which are prefixed by \c CALLBACK_* + * in the function's name) which must also be added to the user application - refer to each + * individual class driver's documentation for mandatory callbacks. In addition, each class driver may + * also define a set of events (identifiable by their prefix of \c EVENT_* in the function's name), which + * the user application may choose to implement, or ignore if not needed. + * + * The individual Device Mode Class Driver documentation contains more information on the non-standardized, + * class-specific functions which the user application can then use on the driver instances, such as data + * read and write routines. See each driver's individual documentation for more information on the + * class-specific functions. + * + * \subsection Sec_ClassDriverHost Host Mode Class Drivers + * Implementing a Host Mode Class Driver in a user application requires a number of steps to be followed. Firstly, + * the module configuration and state structure must be added to the project source. These structures are named in a + * similar manner between classes, that of USB_ClassInfo_{Class Name}_Host_t, and are used to hold the + * complete state and configuration for each class instance. Multiple class instances is where the power of the class + * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's \c USB_ClassInfo_* + * structure. + * + * Inside the \c USB_ClassInfo_* structure lies two sections, a \c Config section, and a \c State section. The \c Config + * section contains the instance's configuration parameters, and must have all fields set by the user application + * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters + * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters. + * + * The following is an example of a properly initialized instance of the MIDI Host Class Driver structure: + * + * \code + * USB_ClassInfo_MIDI_Host_t My_MIDI_Interface = + * { + * .Config = + * { + * .DataINPipe = + * { + * .Address = (PIPE_DIR_IN | 1), + * .Size = 64, + * .Banks = 1, + * }, + * .DataOUTPipe = + * { + * .Address = (PIPE_DIR_OUT | 2), + * .Size = 64, + * .Banks = 1, + * }, + * }, + * }; + * \endcode + * + * To initialize the Class driver instance, the driver's {Class Name}_Host_ConfigurePipes() function + * should be called in response to the \c EVENT_USB_Host_DeviceEnumerationComplete() event firing. This function will + * will return an error code from the class driver's {Class Name}_EnumerationFailure_ErrorCodes_t enum + * to indicate if the driver successfully initialized the instance and bound it to an interface in the attached device. + * Like all the class driver functions, this function takes in the address of the specific instance you wish to initialize - + * in this manner, multiple separate instances of the same class type can be initialized. A fragment of a Class Driver + * based Host mode application may look like the following: + * + * \code + * void EVENT_USB_Host_DeviceEnumerationComplete(void) + * { + * LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); + * + * uint16_t ConfigDescriptorSize; + * uint8_t ConfigDescriptorData[512]; + * + * if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, + * sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) + * { + * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + * return; + * } + * + * if (MIDI_Host_ConfigurePipes(&Keyboard_MIDI_Interface, + * ConfigDescriptorSize, ConfigDescriptorData) != MIDI_ENUMERROR_NoError) + * { + * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + * return; + * } + * + * if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) + * { + * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + * return; + * } + * + * LEDs_SetAllLEDs(LEDMASK_USB_READY); + * } + * \endcode + * + * Note that the function also requires the device's configuration descriptor so that it can determine which interface + * in the device to bind to - this can be retrieved as shown in the above fragment using the + * \ref USB_Host_GetDeviceConfigDescriptor() function. If the device does not implement the interface the class driver + * is looking for, if all the matching interfaces are already bound to class driver instances or if an error occurs while + * binding to a device interface (for example, a device endpoint bank larger that the maximum supported bank size is used) + * the configuration will fail. + * + * To complete the device enumeration after binding the host mode Class Drivers to the attached device, a call to + * \c USB_Host_SetDeviceConfiguration() must be made. If the device configuration is not set within the + * \c EVENT_USB_Host_DeviceEnumerationComplete() event, the host still will assume the device enumeration has failed. + * + * Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's + * {Class Name}_Host_USBTask() function in the main program loop. The exact implementation of this + * function varies between class drivers, and can be used for any internal class driver purpose to maintain each + * instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each + * separate instance, just like the main USB maintenance routine \ref USB_USBTask(): + * + * \code + * int main(void) + * { + * SetupHardware(); + * + * LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + * + * for (;;) + * { + * if (USB_HostState != HOST_STATE_Configured) + * Create_And_Process_Samples(); + * + * MIDI_Host_USBTask(&My_Audio_Interface); + * USB_USBTask(); + * } + * } + * \endcode + * + * Each class driver may also define a set of callback functions (which are prefixed by \c CALLBACK_* + * in the function's name) which must also be added to the user application - refer to each + * individual class driver's documentation for mandatory callbacks. In addition, each class driver may + * also define a set of events (identifiable by their prefix of \c EVENT_* in the function's name), which + * the user application may choose to implement, or ignore if not needed. + * + * The individual Host Mode Class Driver documentation contains more information on the non-standardized, + * class-specific functions which the user application can then use on the driver instances, such as data + * read and write routines. See each driver's individual documentation for more information on the + * class-specific functions. + */ + +#ifndef __USB_H__ +#define __USB_H__ + + /* Macros: */ + #define __INCLUDE_FROM_USB_DRIVER + + /* Includes: */ + #include "../../Common/Common.h" + #include "Core/USBMode.h" + + /* Includes: */ + #include "Core/USBTask.h" + #include "Core/Events.h" + #include "Core/StdDescriptors.h" + #include "Core/ConfigDescriptors.h" + #include "Core/USBController.h" + #include "Core/USBInterrupt.h" + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #include "Core/Host.h" + #include "Core/Pipe.h" + #include "Core/HostStandardReq.h" + #include "Core/PipeStream.h" + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "Core/Device.h" + #include "Core/Endpoint.h" + #include "Core/DeviceStandardReq.h" + #include "Core/EndpointStream.h" + #endif + + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + #include "Core/OTG.h" + #endif + + #include "Class/AndroidAccessoryClass.h" + #include "Class/AudioClass.h" + #include "Class/CDCClass.h" + #include "Class/HIDClass.h" + #include "Class/MassStorageClass.h" + #include "Class/MIDIClass.h" + #include "Class/PrinterClass.h" + #include "Class/RNDISClass.h" + #include "Class/StillImageClass.h" + +#endif + -- cgit v1.2.3