From 6746e37088ce8ba03529c1226bd216705edb2b1f Mon Sep 17 00:00:00 2001 From: tmk Date: Fri, 10 Apr 2015 01:25:48 +0900 Subject: Remove core library and build files --- protocol/iwrap/iWRAP4.txt | 376 ---------------------------------------------- 1 file changed, 376 deletions(-) delete mode 100644 protocol/iwrap/iWRAP4.txt (limited to 'protocol/iwrap/iWRAP4.txt') diff --git a/protocol/iwrap/iWRAP4.txt b/protocol/iwrap/iWRAP4.txt deleted file mode 100644 index 2a062d9d98..0000000000 --- a/protocol/iwrap/iWRAP4.txt +++ /dev/null @@ -1,376 +0,0 @@ -Bulegiga WT12 -============= -WT12 is a bluetooth module from Bluegiga. http://www.bluegiga.com/ - -iWRAP - higher layer interface for bluetooth firmware - communicate with UART - -iWRAP HID -default setting - 115200 8bit/n/1/n - - -TODO ----- -KiCAD circuit/PCB design -power saving - AVR sleep(15ms by watch dog timer) - WT12 sleep - measuring current consumption - measuring battery life of normal usage/idle/intensive usage -software reset/bootloarder -LED indicator(chaging/paring/connecting) -license confirmation of suart.c -consumer page is not working -authenticate method/SSP -SPP keyboard support -SPP debug console support -mouse wheel feature request to Bluegiga - - -Problems --------- -power consumption -no consumer page support(bug?) -no mouse wheel support -no paring management -no interactive auth method - - -UART hardware flow control --------------------------- -(iWRAP4 User Guide 9.5) -Hardware flow control is enabled by default and it should not be disabled unless mandatory, because without the hardware flow control the data transmission may not be reliable. -If the hardware flow control is enabled from PS-keys, but no flow control is used, the following steps should be implemented in the hardware design: -- CTS pin must be grounded -- RTS pin must be left floating - - -Power Saving ------------- -power consume - without opimization: 4hr to shutdown(310mAh) - 2011/08/25: 9hr(310mAh) SNIFF MASTER sleep/WDTO_120MS - -measure current consumption - HHKB keyswitch matrix board - idle - scanning - Bluegiga WT12 module - SLEEP command - deep sleep on/off in config bits - -HHKB keyswich - how to power off - I/O pin configuration when sleeping - FET switch for 5V regulator - -Bluetooth module - power off when in USB mode - power off by FET switch - -AVR configuration - unused pins - ADC - - - -SET CONTROL CONFIG ------------------- - SET CONTROL CONFIG 4810 - SET CONTROL CONFIG LIST - SET CONTROL CONFIG 0000 0000 4910 DEEP_SLEEP KLUDGE INTERACTIVE_PIN UART_LATENCY - - Bit14 UART low latency - Bit11 Interactive pairing mode - Bit04 Deep sleep - - -Reconnection ------------- -SET CONTROL AUTOCALL 1124 5000 HID - 1124 HID service class - 5000 interval ms - -HID profile ------------ -This is needed to configure only once. - SET PROFILE HID ON - RESET - -HID class ---------- - SET BT CLASS 005C0 // keyboard/mouse combined devie - -Pairing Security ----------------- -Secure Simple Pairing(SSP) - SET BT SSP 2 0 // Enables SSP for keyboard and Man-in-the-middle protection - SET BT SSP 3 0 // Enables SSP just works mode - -for keyboard with SSP - SET BT AUTH * 0000 - SET BT SSP 2 0 - SET CONTROL CONFIG 800 - RESET - -for keyboard without SSP - SET BT AUTH * 0000 - SET CONTROL CONFIG 800 - RESET - -AUTH - AUTH xx:xx:xx:xx:xx:xx? // Pairing request event - AUTH xx:xx:xx:xx:xx:xx 0000 - - SSP PASSKEY 78:dd:08:b7:e4:a2 ? - SSP PASSKEY 78:dd:08:b7:e4:a2 xxxxx - (SSP COMPLETE 78:dd:08:b7:e4:a2 HCI_ERROR_AUTH_FAIL // failed) - RING 0 78:dd:08:b7:e4:a2 11 HID - -Connecton - RING xx:xx:xx:xx:xx:xx xx HID // connection event - - KILL xx:xx:xx:xx:xx:xx - -Mode ----- -Command mode -Data mode - Raw mode - (Simple mode not for a real keyboard) - -Raw mode - Keyboard: - 0x9f, length(10), 0xa1, 0x01, mods, 0x00, key1, key2, key3, key4, key5, key6 - - Mouse: - 0x9f, length(5), 0xa1, 0x02, buttons, X, Y - - Consumer page: - 0x9f, length(5), 0xa1, 0x03, bitfield1, bitfield2, bitfield3 - - consumer page suage - Bitfield 1: - 0x01 Volume Increment - 0x02 Volume Decrement - 0x04 Mute - 0x08 Play/Pause - 0x10 Scan Next Track - 0x20 Scan Previous Track - 0x40 Stop - 0x80 Eject - Bitfield 2: - 0x01 Email Reader - 0x02 Application Control Search - 0x04 AC Bookmarks - 0x08 AC Home - 0x10 AC Back - 0x20 AC Forward - 0x40 AC Stop - 0x80 AC Refresh - Bitfield 3: - 0x01 Application Launch Generic Consumer Control - 0x02 AL Internet Browser - 0x04 AL Calculator - 0x08 AL Terminal Lock / Screensaver - 0x10 AL Local Machine Browser - 0x20 AC Minimize - 0x40 Record - 0x80 Rewind - - - - - -2011/07/13 -set -SET BT BDADDR 00:07:80:47:22:14 -SET BT NAME HHKB pro BT -SET BT CLASS 0005c0 -SET BT AUTH * 0000 -SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP -SET BT LAP 9e8b33 -SET BT PAGEMODE 4 2000 1 -SET BT PAIR 78:dd:08:b7:e4:a2 a191189cd7e51030ad6a07848ce879bb -SET BT POWER 3 3 3 -SET BT ROLE 0 f 7d00 -SET BT SNIFF 0 20 1 8 -SET BT SSP 2 1 -SET BT MTU 667 -SET CONTROL AUTOCALL 1124 3000 HID -SET CONTROL BAUD 38400,8n1 -SET CONTROL CD 00 0 -SET CONTROL ECHO 7 -SET CONTROL ESCAPE 43 00 1 -SET CONTROL GAIN 0 5 -SET CONTROL INIT SET CONTROL MUX 0 -SET CONTROL MSC DTE 00 00 00 00 00 00 -SET CONTROL MUX 1 -SET CONTROL PIO 00 00 -SET CONTROL READY 00 -SET PROFILE HID f HID -SET - -info config - -!!! THIS IS BETA RELEASE AND MAY BE USED FOR EVALUATION PURPOSES ONLY !!! - -WRAP THOR AI (4.1.0 build 435) -Copyright (c) 2003-2011 Bluegiga Technologies Inc. -Compiled on Jun 28 2011 17:19:51, running on WT12-A module, psr v31 - AVRCP BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP LEDS MAP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME - - BOCK3 version 435 (Jun 28 2011 17:19:37) (max acl/sco 7/1) - - Bluetooth version 2.1, Power class 2 - - Loader 4279, firmware 6297 (56-bit encryption), native execution mode - - up 0 days, 06:23, 2 connections (pool 2) - - User configuration: -&028a = 0001 0000 0000 0011 0024 0000 0000 0010 0000 0080 0000 0000 0080 005f 009b 0034 00fb 0006 -&028b = 0000 0bb8 -&028d = 0001 -&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000 -&0298 = a006 -&0299 = 0000 0000 -&02a3 = 0030 0030 0030 0030 -&02a4 = 009d 0000 -&02a5 = 0053 0045 0054 0020 0043 004f 004e 0054 0052 004f 004c 0020 004d 0055 0058 0020 0030 -&02a7 = 0000 05c0 -&02a8 = 4910 0000 0000 -&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 -&02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000 -&02ad = 4848 424b 7020 6f72 4220 0054 -&02b3 = 0005 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 -&02b7 = 000f 4948 0044 -&02bb = 8000 -READY. - - - - -2011/07/07 settings: -set -SET BT BDADDR 00:07:80:47:22:14 -SET BT NAME HHKB Pro BT -SET BT CLASS 0005c0 -SET BT AUTH * 000 -SET BT IDENT BT:47 f000 4.0.0 Bluegiga iWRAP -SET BT LAP 9e8b33 -SET BT PAGEMODE 4 2000 1 -SET BT PAIR 78:dd:08:b7:e4:a2 9e54d0aabb1b4d73cfccddb1ea4ef2d6 -SET BT POWER 3 3 3 -SET BT ROLE 0 f 7d00 -SET BT SNIFF 0 20 1 8 -SET BT SSP 3 0 -SET BT MTU 667 -SET CONTROL BAUD 38400,8n1 -SET CONTROL CD 00 0 -SET CONTROL ECHO 7 -SET CONTROL ESCAPE 255 00 1 -SET CONTROL GAIN 0 5 -SET CONTROL INIT set control mux 0 -SET CONTROL MSC DTE 00 00 00 00 00 00 -SET CONTROL PREAMP 1 1 -SET CONTROL READY 00 -SET PROFILE HID HID -SET PROFILE SPP Bluetooth Serial Port -SET - -info config -WRAP THOR AI (4.0.0 build 317) -Copyright (c) 2003-2010 Bluegiga Technologies Inc. -Compiled on Apr 20 2010 16:44:28, running on WT12-A module, psr v31 - AVRCP FTP PBAP PIO=0x00fc SSP SUBRATE VOLUME - - BOCK3 version 317 (Apr 20 2010 16:44:21) (max acl/sco 7/1) - - Bluetooth version 2.1, Power class 2 - - Loader 4279, firmware 6297 (56-bit encryption), native execution mode - - up 0 days, 00:00, 0 connections (pool 1) - - User configuration: -&028c = 0001 0020 0000 0001 0008 0000 -&028d = 0000 -&0296 = 0047 0001 f000 0400 6c42 6575 6967 6167 6920 5257 5041 -&0298 = c006 -&02a3 = 0030 0030 0030 -&02a4 = 009d 0000 -&02a5 = 0073 0065 0074 0020 0063 006f 006e 0074 0072 006f 006c 0020 006d 0075 0078 0020 0030 -&02a7 = 0000 05c0 -&02a8 = 0800 0000 0000 -&02ac = 0000 0000 00ff 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000 -&02ad = 4848 424b 5020 6f72 4220 0054 -&02b3 = 0004 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 -&02b7 = 0000 -&02bb = 6c42 6575 6f74 746f 2068 6553 6972 6c61 5020 726f 0074 -READY. - - - -2011/08/23: -SET BT BDADDR 00:07:80:47:22:14 -SET BT NAME HHKB pro BT -SET BT CLASS 0005c0 -SET BT AUTH * 0000 -SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP -SET BT LAP 9e8b33 -SET BT PAGEMODE 4 2000 1 -SET BT PAIRCOUNT 4 -SET BT POWER 3 3 3 -SET BT ROLE 1 f 12c0 -SET BT SNIFF 10 2 1 8 -SET BT SSP 3 0 -SET BT MTU 667 -SET CONTROL BAUD 38400,8n1 -SET CONTROL CD 00 0 -SET CONTROL ECHO 7 -SET CONTROL ESCAPE 43 00 1 -SET CONTROL GAIN 0 5 -SET CONTROL INIT SET CONTROL MUX 0 -SET CONTROL MSC DTE 00 00 00 00 00 00 -SET CONTROL MUX 1 -SET CONTROL PIO 00 00 -SET CONTROL READY 00 -SET PROFILE HID 7 HIDKeyboardMouse -SET - -SET CONTROL CONFIG 0000 0004 481e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE DEEP_SLEEP INTERACTIVE_PIN UART_LATENCY 23D_NOKLUDGE - - - -2011/08/25: -SET BT BDADDR 00:07:80:47:22:14 -SET BT NAME HHKB pro BT -SET BT CLASS 0005c0 - -SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP -SET BT LAP 9e8b33 -SET BT PAGEMODE 4 2000 1 -SET BT PAIRCOUNT 4 -SET BT PAIR 78:dd:08:b7:e4:a2 0be83335a03fed8ededae42e99554e28 -SET BT POWER 3 3 3 -SET BT ROLE 1 f 12c0 -SET BT SNIFF 100 20 1 8 -SET BT SSP 3 0 -SET BT MTU 667 -SET CONTROL BAUD 38400,8n1 -SET CONTROL CD 00 0 -SET CONTROL ECHO 7 -SET CONTROL ESCAPE - 20 1 -SET CONTROL GAIN 0 5 -SET CONTROL INIT SET CONTROL MUX 0 -SET CONTROL MSC DTE 00 00 00 00 00 00 -SET CONTROL MUX 1 -SET CONTROL PIO 00 00 -SET CONTROL READY 00 -SET PROFILE HID f HIDKeyboardMouse -SET - - -SET CONTROL CONFIG 0000 0000 490e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE INTERACTIVE_PIN UART_LATENCY - - -2011/09/08: -SET CONTROL CONFIG 0000 0000 410e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE UART_LATENCY - - Removed INTERACTIVE_PIN to avoid interactive auth and use SET BT AUTH pin(0000). - - -EOF -- cgit v1.2.3