From 63646e8906e062d1c1de3925cba70c4e3426a855 Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Sat, 12 Feb 2022 10:29:31 -0800 Subject: Format code according to conventions (#16322) --- platforms/chibios/drivers/ws2812_pwm.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'platforms/chibios/drivers/ws2812_pwm.c') diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c index 19ea3cfe8a..57187676d7 100644 --- a/platforms/chibios/drivers/ws2812_pwm.c +++ b/platforms/chibios/drivers/ws2812_pwm.c @@ -11,19 +11,19 @@ #endif #ifndef WS2812_PWM_DRIVER -# define WS2812_PWM_DRIVER PWMD2 // TIMx +# define WS2812_PWM_DRIVER PWMD2 // TIMx #endif #ifndef WS2812_PWM_CHANNEL -# define WS2812_PWM_CHANNEL 2 // Channel +# define WS2812_PWM_CHANNEL 2 // Channel #endif #ifndef WS2812_PWM_PAL_MODE -# define WS2812_PWM_PAL_MODE 2 // DI Pin's alternate function value +# define WS2812_PWM_PAL_MODE 2 // DI Pin's alternate function value #endif #ifndef WS2812_DMA_STREAM -# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP #endif #ifndef WS2812_DMA_CHANNEL -# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP +# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP #endif #if (STM32_DMA_SUPPORTS_DMAMUX == TRUE) && !defined(WS2812_DMAMUX_ID) # error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP" @@ -56,7 +56,7 @@ #ifndef WS2812_PWM_TARGET_PERIOD //# define WS2812_PWM_TARGET_PERIOD 800000 // Original code is 800k...? -# define WS2812_PWM_TARGET_PERIOD 80000 // TODO: work out why 10x less on f303/f4x1 +# define WS2812_PWM_TARGET_PERIOD 80000 // TODO: work out why 10x less on f303/f4x1 #endif /* --- PRIVATE CONSTANTS ---------------------------------------------------- */ @@ -259,8 +259,10 @@ write/read to/from the other buffer). void ws2812_init(void) { // Initialize led frame buffer uint32_t i; - for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle - for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero + for (i = 0; i < WS2812_COLOR_BIT_N; i++) + ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle + for (i = 0; i < WS2812_RESET_BIT_N; i++) + ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); @@ -268,22 +270,22 @@ void ws2812_init(void) { //#pragma GCC diagnostic ignored "-Woverride-init" // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config static const PWMConfig ws2812_pwm_config = { .frequency = WS2812_PWM_FREQUENCY, - .period = WS2812_PWM_PERIOD, // Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben + .period = WS2812_PWM_PERIOD, // Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben .callback = NULL, .channels = { - [0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled - [WS2812_PWM_CHANNEL - 1] = {.mode = WS2812_PWM_OUTPUT_MODE, .callback = NULL}, // Turn on the channel we care about + [0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled + [WS2812_PWM_CHANNEL - 1] = {.mode = WS2812_PWM_OUTPUT_MODE, .callback = NULL}, // Turn on the channel we care about }, .cr2 = 0, - .dier = TIM_DIER_UDE, // DMA on update event for next period + .dier = TIM_DIER_UDE, // DMA on update event for next period }; //#pragma GCC diagnostic pop // Restore command-line warning options // Configure DMA // dmaInit(); // Joe added this dmaStreamAlloc(WS2812_DMA_STREAM - STM32_DMA_STREAM(0), 10, NULL, NULL); - dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWM_DRIVER.tim->CCR[WS2812_PWM_CHANNEL - 1])); // Ziel ist der An-Zeit im Cap-Comp-Register + dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWM_DRIVER.tim->CCR[WS2812_PWM_CHANNEL - 1])); // Ziel ist der An-Zeit im Cap-Comp-Register dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer); dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N); dmaStreamSetMode(WS2812_DMA_STREAM, STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3)); @@ -302,7 +304,7 @@ void ws2812_init(void) { // ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer, // disable counting, enable the channel, and then make whatever configuration changes we need. pwmStart(&WS2812_PWM_DRIVER, &ws2812_pwm_config); - pwmEnableChannel(&WS2812_PWM_DRIVER, WS2812_PWM_CHANNEL - 1, 0); // Initial period is 0; output will be low until first duty cycle is DMA'd in + pwmEnableChannel(&WS2812_PWM_DRIVER, WS2812_PWM_CHANNEL - 1, 0); // Initial period is 0; output will be low until first duty cycle is DMA'd in } void ws2812_write_led(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b) { -- cgit v1.2.3