From 744af003befb3f5cf6dc6b6f3e581f288d598f96 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 6 Jul 2022 19:27:15 +0100 Subject: Add kb2040 and sparkfun rp2040 converters (#17514) --- .../converters/promicro_to_kb2040/_pin_defs.h | 36 ++++++++++++++++++++++ .../converters/promicro_to_kb2040/converter.mk | 9 ++++++ .../promicro_to_promicro_rp2040/_pin_defs.h | 36 ++++++++++++++++++++++ .../promicro_to_promicro_rp2040/converter.mk | 9 ++++++ 4 files changed, 90 insertions(+) create mode 100644 platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_kb2040/converter.mk create mode 100644 platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk (limited to 'platforms/chibios/converters') diff --git a/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h b/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h new file mode 100644 index 0000000000..0a3110890b --- /dev/null +++ b/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 18U +#define B3 20U +#define B2 19U +#define B6 10U + +// LEDs (Mapped to QT connector to avoid collisions with button/neopixel) +#define D5 12U +#define B0 13U diff --git a/platforms/chibios/converters/promicro_to_kb2040/converter.mk b/platforms/chibios/converters/promicro_to_kb2040/converter.mk new file mode 100644 index 0000000000..6ffee357b3 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_kb2040/converter.mk @@ -0,0 +1,9 @@ +# Adafruit KB2040 MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software diff --git a/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h b/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h new file mode 100644 index 0000000000..0a1f4112a3 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to QT connector to avoid collisions with button/neopixel) +#define D5 17U +#define B0 16U diff --git a/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk b/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk new file mode 100644 index 0000000000..03863eeb02 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk @@ -0,0 +1,9 @@ +# Sparkfun Pro Micro RP2040 MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software -- cgit v1.2.3 From d510e80b89b5de54d60ff1a3dc1cca0307161fad Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Thu, 21 Jul 2022 07:54:05 +0800 Subject: Add Blok 2040 conversion (#17603) --- .../converters/promicro_to_blok/_pin_defs.h | 36 ++++++++++++++++++++++ .../converters/promicro_to_blok/converter.mk | 9 ++++++ 2 files changed, 45 insertions(+) create mode 100644 platforms/chibios/converters/promicro_to_blok/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_blok/converter.mk (limited to 'platforms/chibios/converters') diff --git a/platforms/chibios/converters/promicro_to_blok/_pin_defs.h b/platforms/chibios/converters/promicro_to_blok/_pin_defs.h new file mode 100644 index 0000000000..957b84e1a6 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_blok/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 16U +#define D0 17U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to unused pins to avoid collisions) +#define D5 12U +#define B0 13U diff --git a/platforms/chibios/converters/promicro_to_blok/converter.mk b/platforms/chibios/converters/promicro_to_blok/converter.mk new file mode 100644 index 0000000000..5106e411f4 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_blok/converter.mk @@ -0,0 +1,9 @@ +# Boardsource Blok MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software -- cgit v1.2.3 From 4eeafbebabfac04eada98f75dedbecdbbd16298c Mon Sep 17 00:00:00 2001 From: Jay Greco Date: Sat, 13 Aug 2022 06:48:30 -0700 Subject: Add Bit-C PRO converter (#17827) --- .../converters/promicro_to_bit_c_pro/_pin_defs.h | 39 ++++++++++++++++++++++ .../converters/promicro_to_bit_c_pro/converter.mk | 12 +++++++ 2 files changed, 51 insertions(+) create mode 100644 platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk (limited to 'platforms/chibios/converters') diff --git a/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h b/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h new file mode 100644 index 0000000000..92e8fbfa1a --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h @@ -0,0 +1,39 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to R and G channel of the Bit-C PRO's RGB led) +#define D5 16U +#define B0 17U + +// Bit-C LED (mapped to B channel of the Bit-C PRO's RGB led) +#define F0 18U diff --git a/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk b/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk new file mode 100644 index 0000000000..c0eaee8593 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk @@ -0,0 +1,12 @@ +# nullbits Bit-C PRO MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software + +# Tell QMK to use the correct 2nd stage bootloader +OPT_DEFS += -DRP2040_FLASH_W25X10CL -- cgit v1.2.3 From fce99f38757d7ddbcaada0f5f0157ca24b6162b7 Mon Sep 17 00:00:00 2001 From: Mega Mind <68985133+megamind4089@users.noreply.github.com> Date: Sun, 14 Aug 2022 19:27:26 +0800 Subject: [Controller] Added board config for custom controller STeMCell (#16287) Co-authored-by: Mariappan Ramasamy <947300+Mariappan@users.noreply.github.com> Co-authored-by: Mariappan Ramasamy Co-authored-by: Sadek Baroudi --- .../converters/promicro_to_stemcell/_pin_defs.h | 57 ++++++++++++++++++++++ .../converters/promicro_to_stemcell/converter.mk | 22 +++++++++ 2 files changed, 79 insertions(+) create mode 100644 platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_stemcell/converter.mk (limited to 'platforms/chibios/converters') diff --git a/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h b/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h new file mode 100644 index 0000000000..f5dd55905d --- /dev/null +++ b/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h @@ -0,0 +1,57 @@ +// Copyright 2022 Mega Mind (@megamind4089) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Pindefs for v2.0.0 +// https://megamind4089.github.io/STeMCell/pinout/ + +// Left side (front) +#ifdef STEMCELL_UART_SWAP +# define D3 PAL_LINE(GPIOA, 3) +# define D2 PAL_LINE(GPIOA, 2) +#else +# define D3 PAL_LINE(GPIOA, 2) +# define D2 PAL_LINE(GPIOA, 3) +#endif +// GND +// GND +#ifdef STEMCELL_I2C_SWAP +# define D1 PAL_LINE(GPIOB, 6) +# define D0 PAL_LINE(GPIOB, 7) +#else +# define D1 PAL_LINE(GPIOB, 7) +# define D0 PAL_LINE(GPIOB, 6) +#endif + +#define D4 PAL_LINE(GPIOA, 15) +#define C6 PAL_LINE(GPIOB, 3) +#define D7 PAL_LINE(GPIOB, 4) +#define E6 PAL_LINE(GPIOB, 5) +#define B4 PAL_LINE(GPIOB, 8) +#define B5 PAL_LINE(GPIOB, 9) + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 PAL_LINE(GPIOB, 10) +#define F5 PAL_LINE(GPIOB, 2) +#define F6 PAL_LINE(GPIOB, 1) +#define F7 PAL_LINE(GPIOB, 0) + +#define B1 PAL_LINE(GPIOA, 5) +#define B3 PAL_LINE(GPIOA, 6) +#define B2 PAL_LINE(GPIOA, 7) +#define B6 PAL_LINE(GPIOA, 4) + +// Extra elite-c compatible pinout +#define B7 PAL_LINE(GPIOC, 13) +#define D5 PAL_LINE(GPIOC, 14) +#define C7 PAL_LINE(GPIOC, 15) +#define F1 PAL_LINE(GPIOA, 0) +#define F0 PAL_LINE(GPIOA, 1) + +// TX/RX pins of promicro +#define B0 PAL_LINE(GPIOA, 9) // unconnected pin diff --git a/platforms/chibios/converters/promicro_to_stemcell/converter.mk b/platforms/chibios/converters/promicro_to_stemcell/converter.mk new file mode 100644 index 0000000000..525492f96c --- /dev/null +++ b/platforms/chibios/converters/promicro_to_stemcell/converter.mk @@ -0,0 +1,22 @@ +# Copyright 2022 Mega Mind (@megamind4089) +# SPDX-License-Identifier: GPL-2.0-or-later + +MCU := STM32F411 +BOARD := STEMCELL +BOOTLOADER := tinyuf2 + +SERIAL_DRIVER ?= usart +WS2812_DRIVER ?= bitbang + +EEPROM_DRIVER = wear_leveling +WEAR_LEVELING_DRIVER = legacy + + +ifeq ($(strip $(STMC_US)), yes) + OPT_DEFS += -DSTEMCELL_UART_SWAP +endif + +ifeq ($(strip $(STMC_IS)), yes) + OPT_DEFS += -DSTEMCELL_I2C_SWAP +endif + -- cgit v1.2.3 From a645301c827705b04c8f19182153a1962c5c7bcb Mon Sep 17 00:00:00 2001 From: David Hoelscher Date: Wed, 17 Aug 2022 19:01:54 -0500 Subject: Add Bonsai C4 converter (#17711) --- .../converters/promicro_to_bonsai_c4/_pin_defs.h | 40 ++++++++++++++++++++++ .../converters/promicro_to_bonsai_c4/converter.mk | 4 +++ 2 files changed, 44 insertions(+) create mode 100644 platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk (limited to 'platforms/chibios/converters') diff --git a/platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h b/platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h new file mode 100644 index 0000000000..7e6b8ddaf2 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h @@ -0,0 +1,40 @@ +// Copyright 2022 customMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 PAL_LINE(GPIOB, 7) +#define D2 PAL_LINE(GPIOA, 15) +// GND +// GND +#define D1 PAL_LINE(GPIOB, 9) +#define D0 PAL_LINE(GPIOB, 6) +#define D4 PAL_LINE(GPIOA, 4) +#define C6 PAL_LINE(GPIOB, 8) +#define D7 PAL_LINE(GPIOA, 3) +#define E6 PAL_LINE(GPIOB, 10) +#define B4 PAL_LINE(GPIOA, 8) +#define B5 PAL_LINE(GPIOB, 0) + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 PAL_LINE(GPIOA, 7) +#define F5 PAL_LINE(GPIOA, 6) +#define F6 PAL_LINE(GPIOA, 5) +#define F7 PAL_LINE(GPIOA, 1) +#define B1 PAL_LINE(GPIOB, 13) +#define B3 PAL_LINE(GPIOB, 14) +#define B2 PAL_LINE(GPIOB, 15) +#define B6 PAL_LINE(GPIOB, 1) + +// LEDs (only D5/B2 uses an actual LED) +// Setting both RX and TX LEDs to the same pin as there +// is only one LED availble +// If this is undesirable, either B0 or B5 can be redefined by +// using #undef and #define to change its assignment +#define B0 PAL_LINE(GPIOB, 2) +#define D5 PAL_LINE(GPIOB, 2) \ No newline at end of file diff --git a/platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk b/platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk new file mode 100644 index 0000000000..7410209b67 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk @@ -0,0 +1,4 @@ +# Proton C MCU settings for converting AVR projects +MCU := STM32F411 +BOARD := GENERIC_STM32_F411XE +BOOTLOADER := stm32-dfu \ No newline at end of file -- cgit v1.2.3 From 43fd6471305d3ebd9e6cb537d4d39c71e480922e Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 25 Aug 2022 12:17:41 +0100 Subject: Add eeprom defaults for tinyuf2 bootloader (#18042) --- platforms/chibios/converters/promicro_to_stemcell/converter.mk | 4 ---- 1 file changed, 4 deletions(-) (limited to 'platforms/chibios/converters') diff --git a/platforms/chibios/converters/promicro_to_stemcell/converter.mk b/platforms/chibios/converters/promicro_to_stemcell/converter.mk index 525492f96c..1bbe9bf09e 100644 --- a/platforms/chibios/converters/promicro_to_stemcell/converter.mk +++ b/platforms/chibios/converters/promicro_to_stemcell/converter.mk @@ -8,10 +8,6 @@ BOOTLOADER := tinyuf2 SERIAL_DRIVER ?= usart WS2812_DRIVER ?= bitbang -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = legacy - - ifeq ($(strip $(STMC_US)), yes) OPT_DEFS += -DSTEMCELL_UART_SWAP endif -- cgit v1.2.3