From fce99f38757d7ddbcaada0f5f0157ca24b6162b7 Mon Sep 17 00:00:00 2001 From: Mega Mind <68985133+megamind4089@users.noreply.github.com> Date: Sun, 14 Aug 2022 19:27:26 +0800 Subject: [Controller] Added board config for custom controller STeMCell (#16287) Co-authored-by: Mariappan Ramasamy <947300+Mariappan@users.noreply.github.com> Co-authored-by: Mariappan Ramasamy Co-authored-by: Sadek Baroudi --- .../converters/promicro_to_stemcell/_pin_defs.h | 57 ++++++++++++++++++++++ .../converters/promicro_to_stemcell/converter.mk | 22 +++++++++ 2 files changed, 79 insertions(+) create mode 100644 platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_stemcell/converter.mk (limited to 'platforms/chibios/converters/promicro_to_stemcell') diff --git a/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h b/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h new file mode 100644 index 0000000000..f5dd55905d --- /dev/null +++ b/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h @@ -0,0 +1,57 @@ +// Copyright 2022 Mega Mind (@megamind4089) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Pindefs for v2.0.0 +// https://megamind4089.github.io/STeMCell/pinout/ + +// Left side (front) +#ifdef STEMCELL_UART_SWAP +# define D3 PAL_LINE(GPIOA, 3) +# define D2 PAL_LINE(GPIOA, 2) +#else +# define D3 PAL_LINE(GPIOA, 2) +# define D2 PAL_LINE(GPIOA, 3) +#endif +// GND +// GND +#ifdef STEMCELL_I2C_SWAP +# define D1 PAL_LINE(GPIOB, 6) +# define D0 PAL_LINE(GPIOB, 7) +#else +# define D1 PAL_LINE(GPIOB, 7) +# define D0 PAL_LINE(GPIOB, 6) +#endif + +#define D4 PAL_LINE(GPIOA, 15) +#define C6 PAL_LINE(GPIOB, 3) +#define D7 PAL_LINE(GPIOB, 4) +#define E6 PAL_LINE(GPIOB, 5) +#define B4 PAL_LINE(GPIOB, 8) +#define B5 PAL_LINE(GPIOB, 9) + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 PAL_LINE(GPIOB, 10) +#define F5 PAL_LINE(GPIOB, 2) +#define F6 PAL_LINE(GPIOB, 1) +#define F7 PAL_LINE(GPIOB, 0) + +#define B1 PAL_LINE(GPIOA, 5) +#define B3 PAL_LINE(GPIOA, 6) +#define B2 PAL_LINE(GPIOA, 7) +#define B6 PAL_LINE(GPIOA, 4) + +// Extra elite-c compatible pinout +#define B7 PAL_LINE(GPIOC, 13) +#define D5 PAL_LINE(GPIOC, 14) +#define C7 PAL_LINE(GPIOC, 15) +#define F1 PAL_LINE(GPIOA, 0) +#define F0 PAL_LINE(GPIOA, 1) + +// TX/RX pins of promicro +#define B0 PAL_LINE(GPIOA, 9) // unconnected pin diff --git a/platforms/chibios/converters/promicro_to_stemcell/converter.mk b/platforms/chibios/converters/promicro_to_stemcell/converter.mk new file mode 100644 index 0000000000..525492f96c --- /dev/null +++ b/platforms/chibios/converters/promicro_to_stemcell/converter.mk @@ -0,0 +1,22 @@ +# Copyright 2022 Mega Mind (@megamind4089) +# SPDX-License-Identifier: GPL-2.0-or-later + +MCU := STM32F411 +BOARD := STEMCELL +BOOTLOADER := tinyuf2 + +SERIAL_DRIVER ?= usart +WS2812_DRIVER ?= bitbang + +EEPROM_DRIVER = wear_leveling +WEAR_LEVELING_DRIVER = legacy + + +ifeq ($(strip $(STMC_US)), yes) + OPT_DEFS += -DSTEMCELL_UART_SWAP +endif + +ifeq ($(strip $(STMC_IS)), yes) + OPT_DEFS += -DSTEMCELL_I2C_SWAP +endif + -- cgit v1.2.3