From de96513ff2f12e56a572b6f54db548725194c10b Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Sun, 17 Jul 2016 14:57:56 +0200
Subject: changes needed for a ISO satan PCB including a split right-shift key

---
 keyboards/satan/keymaps/iso_split_rshift/Makefile  |  70 ++++++++
 keyboards/satan/keymaps/iso_split_rshift/build.sh  |  17 ++
 keyboards/satan/keymaps/iso_split_rshift/config.h  |  31 ++++
 keyboards/satan/keymaps/iso_split_rshift/keymap.c  | 192 +++++++++++++++++++++
 .../satan/keymaps/iso_split_rshift/resetboard.sh   |   4 +
 keyboards/satan/keymaps/iso_split_rshift/satan.c   |  30 ++++
 keyboards/satan/keymaps/iso_split_rshift/satan.h   |  96 +++++++++++
 7 files changed, 440 insertions(+)
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/Makefile
 create mode 100755 keyboards/satan/keymaps/iso_split_rshift/build.sh
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/config.h
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/keymap.c
 create mode 100755 keyboards/satan/keymaps/iso_split_rshift/resetboard.sh
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.c
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.h

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile
new file mode 100644
index 0000000000..67eaa078f7
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile
@@ -0,0 +1,70 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh
new file mode 100755
index 0000000000..2bfc3bb32d
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+# adjust for cpu 
+# -j 16 gave best result on a hyperthreaded quad core core i7
+THREADS="-j 16"
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+make clean
+make KEYMAP=toni77 ${THREADS}
+if [[ $? -eq 0 ]]
+then
+    echo "please trigger flashing! you have 5 seconds"
+    sleep 5
+    sudo make KEYMAP=toni77 dfu ${THREADS}
+else
+    echo "make failed"
+    exit 77
+fi
diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h
new file mode 100644
index 0000000000..39eec4b597
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/config.h
@@ -0,0 +1,31 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+
+#define RGB_DI_PIN B2
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
new file mode 100644
index 0000000000..fc07f6da8d
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -0,0 +1,192 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "satan.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DEF 0
+#define _SPC 1
+#define _TAB 2
+#define _SFX 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _DEF: Default Layer
+     * ,-----------------------------------------------------------.-------------------------------------
+     * |Grv|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   \ | Tab is Fn1 !!
+     * |-----------------------------------------------------------|
+     * |Ctrl   | A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2| RShift is UP
+     * |-----------------------------------------------------------|
+     * |Ctrl|Win |Alt |      Space/Fn0         |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is 
+     * `-----------------------------------------------------------'   LEFT DWN RIGHT
+     */
+[_DEF] = KEYMAP_ISO_SPLITRSHIFT(
+         KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  \
+         F(2),    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,  \
+         F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, F(17),   \
+         KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX),F(4),  \
+         KC_LCTL, KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, F(5),    F(6),    F(7)) ,
+    /* Keymap 1: F-and-vim Layer, modified with Space (Fn0)
+ * ,-----------------------------------------------------------.-----------------------------------------
+     * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
+     * |-----------------------------------------------------------|
+     * |    |Paus| Up|   |   |   |   |   |   |   |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |Lft|Dwn|Rgt|   |   |   |Left|Down|Right|Up|  | PLAY |
+     * |-----------------------------------------------------------|
+     * |        |   |   |   |   |   |M0 |   |   |   |   | Vol+ |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Prev|Vol-|Next|
+     * `-----------------------------------------------------------'
+     */
+[_SPC] = KEYMAP_ISO_SPLITRSHIFT(
+         KC_PSCR, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+         KC_TRNS, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+         KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
+         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
+         KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT) ,
+    
+    /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1)
+     * ,-----------------------------------------------------------.-----------------------------------------
+     * |WAKE|   |   |   |   |   |   |   |   |   |   |   |   |Insert|  TAB+GRC = WAKE
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |   |   |   |   |   |   |Pos1|PgDn|PgUp|End|  |Retrn |
+     * |-----------------------------------------------------------|
+     * |        |   |   |   |   |   |AF2|   |   |   |   | PgUp |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Pos1|PgDn|End |
+     * `-----------------------------------------------------------'
+     */
+[_TAB] = KEYMAP_ISO_SPLITRSHIFT(
+         KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
+         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
+         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
+         KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END) ,
+    
+    /* Keymap 3: Split right shift Numpad toggle Layer (Fn2)
+     * ,-----------------------------------------------------------.-----------------------------------------
+     * |RSET|  |   |   |   |   |   |  7|  8|  9|   |   |   |Backsp |
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   | 4 | 5 | 6 |   |   |   |   \ |
+     * |-----------------------------------------------------------|
+     * |      | L | L |   |   |   |   | 1 | 2 | 3 |   |   | Return |
+     * |-----------------------------------------------------------|
+     * |        | L | L | L | L | L | L |   | 0 |   |  /|  Up  |   | All "L"s represent
+     * |-----------------------------------------------------------| LED controlling
+     * |Ctrl|Win |Alt |                        |Alt |Left|Down|Right|
+     * `-----------------------------------------------------------'
+     */
+[_SFX] = KEYMAP_ISO_SPLITRSHIFT(
+         RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
+         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
+         KC_TRNS, F(9),    F(10),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3,    KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
+         KC_TRNS, F(11),   F(12),   F(13),   F(14),   F(15),   F(16),   KC_TRNS, KC_TRNS, KC_0,    KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
+         KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT) ,
+
+};
+
+enum function_id {
+    LAUNCH,
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0]  = ACTION_LAYER_TAP_KEY(_SPC, KC_SPACE),
+    [1]  = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
+    [2]  = ACTION_LAYER_TAP_KEY(_TAB, KC_TAB),
+    [3]  = ACTION_LAYER_TOGGLE(_SFX),
+    [4]  = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
+    [5]  = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
+    [6]  = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
+    [7]  = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
+    [8]  = ACTION_FUNCTION(LAUNCH),
+    [9]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+    [10] = ACTION_FUNCTION(RGBLED_STEP_MODE),
+    [11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+    [12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+    [13] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+    [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+    [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+    [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+    [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          return (record->event.pressed ? 
+                  MACRO( D(RALT), T(SPC), U(RALT), END )
+                  :MACRO( END ));
+          break;
+        case 1:
+          return (record->event.pressed ? 
+                  MACRO( D(LALT), T(F2), U(LALT), END )
+                  :MACRO( END ));
+          break;
+      }
+    return MACRO_NONE;
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    switch (id) {
+        case RGBLED_TOGGLE:
+            //led operations
+            if (record->event.pressed) {
+                rgblight_toggle();
+            }
+            break;
+        case RGBLED_INCREASE_HUE:
+            if (record->event.pressed) {
+                rgblight_increase_hue();
+            }
+            break;
+        case RGBLED_DECREASE_HUE:
+            if (record->event.pressed) {
+                rgblight_decrease_hue();
+            }
+            break;
+        case RGBLED_INCREASE_SAT:
+            if (record->event.pressed) {
+                rgblight_increase_sat();
+            }
+            break;
+        case RGBLED_DECREASE_SAT:
+            if (record->event.pressed) {
+                rgblight_decrease_sat();
+            }
+            break;
+        case RGBLED_INCREASE_VAL:
+            if (record->event.pressed) {
+                rgblight_increase_val();
+            }
+            break;
+        case RGBLED_DECREASE_VAL:
+            if (record->event.pressed) {
+                rgblight_decrease_val();
+            }
+            break;
+        case RGBLED_STEP_MODE:
+            if (record->event.pressed) {
+                rgblight_step();
+            }
+            break;
+    }
+}
diff --git a/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh
new file mode 100755
index 0000000000..d955ccf545
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+sudo dfu-programmer atmega32u4 erase --force
+sudo dfu-programmer atmega32u4 flash clear_flash.hex
+sudo dfu-programmer atmega32u4 reset
diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.c b/keyboards/satan/keymaps/iso_split_rshift/satan.c
new file mode 100644
index 0000000000..d2c5d5c205
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/satan.c
@@ -0,0 +1,30 @@
+#include "satan.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
+}
diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.h b/keyboards/satan/keymaps/iso_split_rshift/satan.h
new file mode 100644
index 0000000000..2ca820c63e
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/satan.h
@@ -0,0 +1,96 @@
+#ifndef SATAN_H
+#define SATAN_H
+
+#include "../../../../quantum/quantum.h"
+
+/* Clueboard matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3d      |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+	k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,           k3d, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
+	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1d}, \
+	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29,   k2a, k2b, KC_NO, k2d}, \
+	{k30, KC_NO, k32, k33,   k34,   k35, k36,   k37,   k38,   k39,   k3a, k3b, KC_NO, k3d}, \
+	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c,   k4d}  \
+}
+
+/* Satan HHKB matrix layout
+   * ,------------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
+   * |------------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d  |
+   * |------------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d     |
+   * |------------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d   | 3c |
+   * |------------------------------------------------------------|
+   * | 40 | 41 | 42 |        45              | 4a | 4b | 4c | 4d  |
+   * `------------------------------------------------------------'
+ */
+
+#define KEYMAP_HHKB( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+	k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,    k3d,   k3c, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09, k0a, k0b, k0c,   k0d}, \
+	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19, k1a, k1b, k1c,   k1d}, \
+	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29, k2a, k2b, KC_NO, k2d}, \
+	{k30, KC_NO, k32, k33,   k34,   k35, k36,   k37,   k38,   k39, k3a, k3b, k3c,   k3d}, \
+	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c,   k4d}  \
+}
+
+/* ISO w/ split right shift key matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c|   3d |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO_SPLITRSHIFT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
+	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1d}, \
+	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29,   k2a, k2b, k2c,   k2d}, \
+	{k30, k31,   k32, k33,   k34,   k35, k36,   k37,   k38,   k39,   k3a, k3b, k3c,   k3d}, \
+	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c,   k4d}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
-- 
cgit v1.2.3


From db7aa91e767c5ee63c72a4d49b02369ab7e887f2 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Sun, 17 Jul 2016 15:10:14 +0200
Subject: helper file for me to stay up-to-date with master

---
 keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh | 4 ++++
 1 file changed, 4 insertions(+)
 create mode 100755 keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh
new file mode 100755
index 0000000000..d17ec76ecd
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+git checkout iso_split_rshift # gets you "on branch dmgr2"
+git fetch origin              # gets you up to date with origin
+git merge origin/master
-- 
cgit v1.2.3


From 11bf8355cf90b64d749d39cd49ec597a48e8beb9 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Sun, 17 Jul 2016 23:13:49 +0200
Subject: new modifier "J" is crtl

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index fc07f6da8d..a2623e0e09 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
          KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  \
          F(2),    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,  \
-         F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, F(17),   \
+         F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    F(17),   KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,   \
          KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX),F(4),  \
          KC_LCTL, KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, F(5),    F(6),    F(7)) ,
     /* Keymap 1: F-and-vim Layer, modified with Space (Fn0)
@@ -124,7 +124,7 @@ const uint16_t PROGMEM fn_actions[] = {
     [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
     [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
     [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
-    [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
+    [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_J),
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-- 
cgit v1.2.3


From 36242d5ac5b42d828b51ff87a9317dc8420c1b6c Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 18 Jul 2016 10:50:19 +0200
Subject: reduced makefile size. not so much needed due to "inheritance"

---
 keyboards/satan/keymaps/iso_split_rshift/Makefile | 51 -----------------------
 1 file changed, 51 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile
index 67eaa078f7..e25515b692 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/Makefile
+++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile
@@ -1,54 +1,3 @@
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #
-- 
cgit v1.2.3


From 4b32a161d04c9efe650479b89d4c8f323dd41aa3 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 18 Jul 2016 10:50:45 +0200
Subject: renamed keymap

---
 keyboards/satan/keymaps/iso_split_rshift/build.sh | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh
index 2bfc3bb32d..c286f26f8e 100755
--- a/keyboards/satan/keymaps/iso_split_rshift/build.sh
+++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh
@@ -2,15 +2,16 @@
 # adjust for cpu 
 # -j 16 gave best result on a hyperthreaded quad core core i7
 THREADS="-j 16"
+KMAP=iso_split_rschift
 echo "We need sudo later"
 sudo ls 2>&1 /dev/null
 make clean
-make KEYMAP=toni77 ${THREADS}
+make KEYMAP=iso_split_rschift ${THREADS}
 if [[ $? -eq 0 ]]
 then
     echo "please trigger flashing! you have 5 seconds"
     sleep 5
-    sudo make KEYMAP=toni77 dfu ${THREADS}
+    sudo make KEYMAP=iso_split_rschift dfu ${THREADS}
 else
     echo "make failed"
     exit 77
-- 
cgit v1.2.3


From 1988c180e3cc971e83db0f9e862de4857ce6d766 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Tue, 19 Jul 2016 09:16:55 +0200
Subject: small cosmetic change

---
 keyboards/satan/keymaps/iso_split_rshift/build.sh | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh
index c286f26f8e..9523f6716f 100755
--- a/keyboards/satan/keymaps/iso_split_rshift/build.sh
+++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh
@@ -2,16 +2,16 @@
 # adjust for cpu 
 # -j 16 gave best result on a hyperthreaded quad core core i7
 THREADS="-j 16"
-KMAP=iso_split_rschift
+KMAP=iso_split_rshift
 echo "We need sudo later"
 sudo ls 2>&1 /dev/null
 make clean
-make KEYMAP=iso_split_rschift ${THREADS}
+make KEYMAP=${KMAP} ${THREADS}
 if [[ $? -eq 0 ]]
 then
     echo "please trigger flashing! you have 5 seconds"
     sleep 5
-    sudo make KEYMAP=iso_split_rschift dfu ${THREADS}
+    sudo make KEYMAP=${KMAP} dfu ${THREADS}
 else
     echo "make failed"
     exit 77
-- 
cgit v1.2.3


From 5cd6d607fc7362fdf72ecd76f802305bce68270c Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Tue, 19 Jul 2016 09:17:31 +0200
Subject: changed ctrl back to enter. "j" interfered with my vimming

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index a2623e0e09..fc07f6da8d 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
          KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  \
          F(2),    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,  \
-         F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    F(17),   KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,   \
+         F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, F(17),   \
          KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX),F(4),  \
          KC_LCTL, KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, F(5),    F(6),    F(7)) ,
     /* Keymap 1: F-and-vim Layer, modified with Space (Fn0)
@@ -124,7 +124,7 @@ const uint16_t PROGMEM fn_actions[] = {
     [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
     [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
     [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
-    [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_J),
+    [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-- 
cgit v1.2.3


From c1f014b1dd24ba7e121ae3ca999d832b07ce50cf Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Fri, 22 Jul 2016 08:13:06 +0200
Subject: purely cosmetic changes

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 84 +++++++++++------------
 1 file changed, 42 insertions(+), 42 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index fc07f6da8d..17d4b33456 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -14,7 +14,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap _DEF: Default Layer
-     * ,-----------------------------------------------------------.-------------------------------------
+     * ,-----------------------------------------------------------.
      * |Grv|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
      * |-----------------------------------------------------------|
      * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   \ | Tab is Fn1 !!
@@ -26,14 +26,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |Ctrl|Win |Alt |      Space/Fn0         |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is 
      * `-----------------------------------------------------------'   LEFT DWN RIGHT
      */
-[_DEF] = KEYMAP_ISO_SPLITRSHIFT(
-         KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  \
-         F(2),    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,  \
-         F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, F(17),   \
-         KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX),F(4),  \
-         KC_LCTL, KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, F(5),    F(6),    F(7)) ,
+    [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
+            KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+            F(2),    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+            F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, F(17),   \
+            KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX),F(4),    \
+            KC_LCTL, KC_LGUI, KC_LALT,                    LT(_SPC,KC_SPACE),                          KC_RALT, F(5),    F(6),    F(7)) ,
+
     /* Keymap 1: F-and-vim Layer, modified with Space (Fn0)
- * ,-----------------------------------------------------------.-----------------------------------------
+     * ,-----------------------------------------------------------.
      * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
      * |-----------------------------------------------------------|
      * |    |Paus| Up|   |   |   |   |   |   |   |   |   |   |     |
@@ -45,15 +46,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |    |    |    |                        |Alt |Prev|Vol-|Next|
      * `-----------------------------------------------------------'
      */
-[_SPC] = KEYMAP_ISO_SPLITRSHIFT(
-         KC_PSCR, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
-         KC_TRNS, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-         KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
-         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
-         KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT) ,
-    
+    [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
+            KC_PSCR, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+            KC_TRNS, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+            KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
+            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
+
     /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1)
-     * ,-----------------------------------------------------------.-----------------------------------------
+     * ,-----------------------------------------------------------.
      * |WAKE|   |   |   |   |   |   |   |   |   |   |   |   |Insert|  TAB+GRC = WAKE
      * |-----------------------------------------------------------|
      * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
@@ -65,15 +66,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |    |    |    |                        |Alt |Pos1|PgDn|End |
      * `-----------------------------------------------------------'
      */
-[_TAB] = KEYMAP_ISO_SPLITRSHIFT(
-         KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
-         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
-         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
-         KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END) ,
-    
+    [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
+            KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
+            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+
     /* Keymap 3: Split right shift Numpad toggle Layer (Fn2)
-     * ,-----------------------------------------------------------.-----------------------------------------
+     * ,-----------------------------------------------------------.
      * |RSET|  |   |   |   |   |   |  7|  8|  9|   |   |   |Backsp |
      * |-----------------------------------------------------------|
      * |     |   |   |   |   |   |   | 4 | 5 | 6 |   |   |   |   \ |
@@ -85,13 +86,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |Ctrl|Win |Alt |                        |Alt |Left|Down|Right|
      * `-----------------------------------------------------------'
      */
-[_SFX] = KEYMAP_ISO_SPLITRSHIFT(
-         RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
-         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
-         KC_TRNS, F(9),    F(10),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3,    KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
-         KC_TRNS, F(11),   F(12),   F(13),   F(14),   F(15),   F(16),   KC_TRNS, KC_TRNS, KC_0,    KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
-         KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT) ,
-
+    [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
+            RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
+            KC_TRNS, F(9),    F(10),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3,    KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
+            KC_TRNS, F(11),   F(12),   F(13),   F(14),   F(15),   F(16),   KC_TRNS, KC_TRNS, KC_0,    KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
+            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT),
 };
 
 enum function_id {
@@ -129,19 +129,19 @@ const uint16_t PROGMEM fn_actions[] = {
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
-  // MACRODOWN only works in this function
-      switch(id) {
+    // MACRODOWN only works in this function
+    switch(id) {
         case 0:
-          return (record->event.pressed ? 
-                  MACRO( D(RALT), T(SPC), U(RALT), END )
-                  :MACRO( END ));
-          break;
+            return (record->event.pressed ? 
+                    MACRO( D(RALT), T(SPC), U(RALT), END )
+                    :MACRO( END ));
+            break;
         case 1:
-          return (record->event.pressed ? 
-                  MACRO( D(LALT), T(F2), U(LALT), END )
-                  :MACRO( END ));
-          break;
-      }
+            return (record->event.pressed ? 
+                    MACRO( D(LALT), T(F2), U(LALT), END )
+                    :MACRO( END ));
+            break;
+    }
     return MACRO_NONE;
 };
 
-- 
cgit v1.2.3


From 197244e47f619b0853e4fdb54bb821a32b584764 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Fri, 22 Jul 2016 08:14:08 +0200
Subject: more cosmetic changes (whitespace)

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 17d4b33456..c7aad3fc00 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -116,7 +116,7 @@ const uint16_t PROGMEM fn_actions[] = {
     [6]  = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
     [7]  = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
     [8]  = ACTION_FUNCTION(LAUNCH),
-    [9]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+ purely cosmetic changes   [9]  = ACTION_FUNCTION(RGBLED_TOGGLE),
     [10] = ACTION_FUNCTION(RGBLED_STEP_MODE),
     [11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
     [12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
-- 
cgit v1.2.3


From 5631f1436c356fb9e09138f186981dc9b6cb43a2 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Fri, 22 Jul 2016 11:17:57 +0200
Subject: converted funtions to QMK aliases

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 55 ++++++++++-------------
 1 file changed, 23 insertions(+), 32 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index c7aad3fc00..545cb1ab18 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -27,13 +27,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'   LEFT DWN RIGHT
      */
     [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
-            KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
-            F(2),    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
-            F(1),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, F(17),   \
-            KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX),F(4),    \
-            KC_LCTL, KC_LGUI, KC_LALT,                    LT(_SPC,KC_SPACE),                          KC_RALT, F(5),    F(6),    F(7)) ,
-
-    /* Keymap 1: F-and-vim Layer, modified with Space (Fn0)
+            KC_GRV,          KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS,        KC_EQL,          KC_BSPC,         \
+            LT(_TAB,KC_TAB), KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC,        KC_RBRC,         KC_BSLS,         \
+            CTL_T(KC_ESC),   KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT,        KC_NUHS,         CTL_T(KC_ENT),   \
+            KC_LSFT,         KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH,        TG(_SFX),        SFT_T(KC_UP),    \
+            KC_LCTL,         KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN),  CTL_T(KC_RIGHT)),
+    /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
      * ,-----------------------------------------------------------.
      * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
      * |-----------------------------------------------------------|
@@ -53,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
             KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
 
-    /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1)
+    /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
      * ,-----------------------------------------------------------.
      * |WAKE|   |   |   |   |   |   |   |   |   |   |   |   |Insert|  TAB+GRC = WAKE
      * |-----------------------------------------------------------|
@@ -73,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
             KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_HOME, KC_PGDN, KC_END),
 
-    /* Keymap 3: Split right shift Numpad toggle Layer (Fn2)
+    /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
      * ,-----------------------------------------------------------.
      * |RSET|  |   |   |   |   |   |  7|  8|  9|   |   |   |Backsp |
      * |-----------------------------------------------------------|
@@ -87,11 +86,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
-            RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
-            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6,    KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
-            KC_TRNS, F(9),    F(10),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3,    KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
-            KC_TRNS, F(11),   F(12),   F(13),   F(14),   F(15),   F(16),   KC_TRNS, KC_TRNS, KC_0,    KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
-            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT),
+            RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
+            KC_TRNS, F(2),    F(3),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3, KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
+            KC_TRNS, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
+            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT),
 };
 
 enum function_id {
@@ -107,24 +106,16 @@ enum function_id {
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-    [0]  = ACTION_LAYER_TAP_KEY(_SPC, KC_SPACE),
-    [1]  = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
-    [2]  = ACTION_LAYER_TAP_KEY(_TAB, KC_TAB),
-    [3]  = ACTION_LAYER_TOGGLE(_SFX),
-    [4]  = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
-    [5]  = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
-    [6]  = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
-    [7]  = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
-    [8]  = ACTION_FUNCTION(LAUNCH),
- purely cosmetic changes   [9]  = ACTION_FUNCTION(RGBLED_TOGGLE),
-    [10] = ACTION_FUNCTION(RGBLED_STEP_MODE),
-    [11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
-    [12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
-    [13] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
-    [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
-    [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
-    [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
-    [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
+    [1] = ACTION_FUNCTION(LAUNCH),
+    [2] = ACTION_FUNCTION(RGBLED_TOGGLE),
+    [3] = ACTION_FUNCTION(RGBLED_STEP_MODE),
+    [4] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+    [5] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+    [6] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+    [7] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+    [8] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+    [9] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+    [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-- 
cgit v1.2.3


From 34bce6f206e30c06f4b6ccd22d461690732ea607 Mon Sep 17 00:00:00 2001
From: Jason Janse van Rensburg <l33tjas.0n@gmail.com>
Date: Sun, 24 Jul 2016 04:08:40 +0200
Subject: fixed stupid errors

---
 keyboards/planck/keymaps/bone2planck/keymap.c | 29 ++++++++++++++++-----------
 1 file changed, 17 insertions(+), 12 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c
index ceb5564251..4cac60ff9f 100644
--- a/keyboards/planck/keymaps/bone2planck/keymap.c
+++ b/keyboards/planck/keymaps/bone2planck/keymap.c
@@ -3,10 +3,15 @@
 #ifdef BACKLIGHT_ENABLE
 #include "backlight.h"
 #endif
+#include "keymap_german.h"
+
+/* for intellisense, comment for building
 #include "..\..\..\..\quantum\keymap_extras\keymap_german.h"
 #include "..\..\..\..\quantum\keymap_common.h"
 #include "..\..\..\..\tmk_core\common\keycode.h"
-#define _______ = KC_TRNS;
+*/
+
+#define _______ KC_TRNS
 
 /* This Layout tries to emulate the Bone2 Variant of Neo2, and is intended to be used with a German QWERTZ Softwarelayout.
 It has "üäöß" as it is optimized for a mix of German & English.
@@ -26,14 +31,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   F  |   V  |   Ü  |   Ä  |   Ö  |   Y  |   Z  |   ,  |   .  |   K  |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  |      | Ctrl | Esc  |
+* | GUI  | Ctrl | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  | Alt  | Ctrl | Esc  |
 * `-----------------------------------------------------------------------------------'
 */
 [0] = {
 	{ DE_Q,         DE_J,    DE_D,    DE_U,  DE_A,  DE_X,   DE_P,   DE_H,  DE_L,    DE_M,   DE_W,    DE_SS        },
 	{ LT(1,KC_TAB), DE_C,    DE_T,    DE_I,  DE_E,  DE_O,   DE_B,   DE_N,  DE_R,    DE_S,   DE_G,    LT(1,KC_ENT) },
 	{ KC_LSFT,      DE_F,    DE_V,    DE_UE, DE_AE, DE_OE,  DE_Y,   DE_Z,  DE_COMM, DE_DOT, DE_K,    KC_LSFT      },
-	{ KC_LGUI,      KC_LCTL, KC_LALT, MO(4), MO(2), KC_SPC, KC_SPC, MO(2), MO(4),   KC_NO,  KC_RCTL, KC_ESC       }
+	{ KC_RGUI,      KC_LCTL, KC_LALT, MO(4), MO(2), KC_SPC, KC_SPC, MO(2), MO(4),   KC_RALT,  KC_RCTL, KC_ESC       }
 },
 
 /* M1 Special Characters
@@ -45,7 +50,7 @@ very ergonomic placement for coding
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   #  |   $  |   |  |   ~  |   €  |   +  |   %  |   "  |   '  |   ;  |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  |      | Ctrl | Esc  |
+* | GUI  | Ctrl | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  | Alt  | Ctrl | Esc  |
 * `-----------------------------------------------------------------------------------'
 */
 [1] = {
@@ -64,7 +69,7 @@ very easy to get used to & intuituve placement
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|      |  Tab | Ins  | Enter|      |   0  |   1  |   2  |   3  |   ;  |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M3  |  M2  |    Space    |  M2  |  M3  |      | Ctrl | Esc  |
+* | GUI  | Ctrl | Alt  |  M3  |  M2  |    Space    |  M2  |  M3  | Alt  | Ctrl | Esc  |
 * `-----------------------------------------------------------------------------------'
 */
 [2] = {
@@ -83,12 +88,12 @@ accessed by sliding from M2 to M3 with thumb
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|  0   |  1   |  2   |  3   |   ;  |      | Tab  |  Ins | Enter|      |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M3  |      |    Space    |      |  M3  |      | Ctrl | Esc  |
+* | GUI  | Ctrl | Alt  |  M3  |      |    Space    |      |  M3  | Alt  | Ctrl | Esc  |
 * `-----------------------------------------------------------------------------------'
 */
 
 [3] = {
-	{ KC_NO,   KC_NO,   DE_7,    DE_8     DE_9,  KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO   },
+	{ KC_NO,   KC_NO,   DE_7,    DE_8,     DE_9,  KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO   },
 	{ _______, DE_DOT,  DE_4,    DE_5,    DE_6,  DE_COMM, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  _______ },
 	{ _______, DE_0,    DE_1,    DE_2,    DE_3,  DE_SCLN, KC_NO,   KC_TAB,  KC_INS,  KC_ENT,  KC_NO,   _______ },
 	{ _______, _______, _______, _______, KC_NO, _______, _______, KC_NO,   _______, _______, _______, _______ }
@@ -104,7 +109,7 @@ slide from m4 to m5 to access flipped version
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|      | Prev | Play | Next |      |   ²  |  F1  |  F2  |  F3  |  F10 |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M4  |  M5  |    Space    |  M5  |  M4  |      | Ctrl | Esc  |
+* | GUI  | Ctrl | Alt  |  M4  |  M5  |    Space    |  M5  |  M4  | Alt  | Ctrl | Esc  |
 * `-----------------------------------------------------------------------------------'
 */
 [4] = {
@@ -112,7 +117,7 @@ slide from m4 to m5 to access flipped version
 	{ KC_NO,   KC_NO,   KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   DE_SQ3,  KC_F4, KC_F5,   KC_F6,   KC_F11,  KC_NO   },
 	{ _______, KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   DE_SQ2,  KC_F1, KC_F2,   KC_F3,   KC_F10,  _______ },
 	{ _______, _______, _______, _______, MO(5),   _______, _______, MO(5), _______, _______, _______, _______ }
-}
+},
 
 
 /* flipped Function & Media Keys
@@ -123,13 +128,13 @@ slide from m4 to m5 to access flipped version
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|  ²   |  F1  |  F2  |  F3  |      |      | Prev | Play | Next |      |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |      |  M5  |    Space    |  M5  |      |      | Ctrl | Esc  |
+* | GUI  | Ctrl | Alt  |      |  M5  |    Space    |  M5  |      | Alt  | Ctrl | Esc  |
 * `-----------------------------------------------------------------------------------'
 */
 [5] = {
 	{ KC_NO,   KC_NO,   KC_F7,   KC_F8, KC_F9,   KC_NO,   KC_NO,   KC_PSCR, KC_SLCK, KC_PAUS, KC_NO,   KC_NO   },
-	{ KC_NO,   KC_SQ3,  KC_F4,   KC_F5, KC_F6,   KC_NO,   KC_NO,   KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   KC_NO   },
-	{ _______, KC_SQ2,  KC_F1,   KC_F2, KC_F3,   KC_NO,   KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   _______ },
+	{ KC_NO,   DE_SQ3,  KC_F4,   KC_F5, KC_F6,   KC_NO,   KC_NO,   KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   KC_NO   },
+	{ _______, DE_SQ2,  KC_F1,   KC_F2, KC_F3,   KC_NO,   KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   _______ },
 	{ _______, _______, _______, KC_NO, _______, _______, _______, _______, KC_NO,   _______, _______, _______ }
 }
 };
-- 
cgit v1.2.3


From 58f092cf872a8f3f584b98445672f3e6809672c2 Mon Sep 17 00:00:00 2001
From: Jason Janse van Rensburg <l33tjas.0n@gmail.com>
Date: Sun, 24 Jul 2016 04:52:35 +0200
Subject: moved ctrl

---
 keyboards/planck/keymaps/bone2planck/keymap.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c
index 4cac60ff9f..440de7f0da 100644
--- a/keyboards/planck/keymaps/bone2planck/keymap.c
+++ b/keyboards/planck/keymaps/bone2planck/keymap.c
@@ -5,7 +5,8 @@
 #endif
 #include "keymap_german.h"
 
-/* for intellisense, comment for building
+// for intellisense, comment for building
+/*
 #include "..\..\..\..\quantum\keymap_extras\keymap_german.h"
 #include "..\..\..\..\quantum\keymap_common.h"
 #include "..\..\..\..\tmk_core\common\keycode.h"
@@ -31,14 +32,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   F  |   V  |   Ü  |   Ä  |   Ö  |   Y  |   Z  |   ,  |   .  |   K  |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  | Alt  | Ctrl | Esc  |
+* | Ctrl | GUI  | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 [0] = {
-	{ DE_Q,         DE_J,    DE_D,    DE_U,  DE_A,  DE_X,   DE_P,   DE_H,  DE_L,    DE_M,   DE_W,    DE_SS        },
-	{ LT(1,KC_TAB), DE_C,    DE_T,    DE_I,  DE_E,  DE_O,   DE_B,   DE_N,  DE_R,    DE_S,   DE_G,    LT(1,KC_ENT) },
-	{ KC_LSFT,      DE_F,    DE_V,    DE_UE, DE_AE, DE_OE,  DE_Y,   DE_Z,  DE_COMM, DE_DOT, DE_K,    KC_LSFT      },
-	{ KC_RGUI,      KC_LCTL, KC_LALT, MO(4), MO(2), KC_SPC, KC_SPC, MO(2), MO(4),   KC_RALT,  KC_RCTL, KC_ESC       }
+	{ DE_Q,         DE_J,    DE_D,    DE_U,  DE_A,  DE_X,   DE_P,   DE_H,  DE_L,    DE_M,    DE_W,    DE_SS        },
+	{ LT(1,KC_TAB), DE_C,    DE_T,    DE_I,  DE_E,  DE_O,   DE_B,   DE_N,  DE_R,    DE_S,    DE_G,    LT(1,KC_ENT) },
+	{ KC_LSFT,      DE_F,    DE_V,    DE_UE, DE_AE, DE_OE,  DE_Y,   DE_Z,  DE_COMM, DE_DOT,  DE_K,    KC_LSFT      },
+	{ KC_LCTL,      KC_RGUI, KC_LALT, MO(4), MO(2), KC_SPC, KC_SPC, MO(2), MO(4),   KC_RALT, KC_ESC,  KC_RCTL      }
 },
 
 /* M1 Special Characters
@@ -50,7 +51,7 @@ very ergonomic placement for coding
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   #  |   $  |   |  |   ~  |   €  |   +  |   %  |   "  |   '  |   ;  |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  | Alt  | Ctrl | Esc  |
+* | Ctrl | GUI  | Alt  |  M4  |  M2  |    Space    |  M2  |  M4  | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 [1] = {
@@ -69,7 +70,7 @@ very easy to get used to & intuituve placement
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|      |  Tab | Ins  | Enter|      |   0  |   1  |   2  |   3  |   ;  |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M3  |  M2  |    Space    |  M2  |  M3  | Alt  | Ctrl | Esc  |
+* | Ctrl | GUI  | Alt  |  M3  |  M2  |    Space    |  M2  |  M3  | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 [2] = {
@@ -88,7 +89,7 @@ accessed by sliding from M2 to M3 with thumb
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|  0   |  1   |  2   |  3   |   ;  |      | Tab  |  Ins | Enter|      |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M3  |      |    Space    |      |  M3  | Alt  | Ctrl | Esc  |
+* | Ctrl | GUI  | Alt  |  M3  |      |    Space    |      |  M3  | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 
@@ -109,7 +110,7 @@ slide from m4 to m5 to access flipped version
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|      | Prev | Play | Next |      |   ²  |  F1  |  F2  |  F3  |  F10 |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |  M4  |  M5  |    Space    |  M5  |  M4  | Alt  | Ctrl | Esc  |
+* | Ctrl | GUI  | Alt  |  M4  |  M5  |    Space    |  M5  |  M4  | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 [4] = {
@@ -128,7 +129,7 @@ slide from m4 to m5 to access flipped version
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|  ²   |  F1  |  F2  |  F3  |      |      | Prev | Play | Next |      |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
-* | GUI  | Ctrl | Alt  |      |  M5  |    Space    |  M5  |      | Alt  | Ctrl | Esc  |
+* | Ctrl | GUI  | Alt  |      |  M5  |    Space    |  M5  |      | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 [5] = {
-- 
cgit v1.2.3


From 1bfd57e2345119d5c60e95cdf82e14eb81a3b027 Mon Sep 17 00:00:00 2001
From: Jason Janse van Rensburg <l33tjas.0n@gmail.com>
Date: Sun, 24 Jul 2016 05:02:06 +0200
Subject: moved insert

---
 keyboards/planck/keymaps/bone2planck/keymap.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c
index 440de7f0da..6390e12897 100644
--- a/keyboards/planck/keymaps/bone2planck/keymap.c
+++ b/keyboards/planck/keymaps/bone2planck/keymap.c
@@ -64,19 +64,19 @@ very ergonomic placement for coding
 /* Navigation & Number Blocks
 very easy to get used to & intuituve placement
 * ,-----------------------------------------------------------------------------------.
-* |      | PgUp | Bksp |  Up  |  DEL | PgDn |      |   7  |   8  |   9  |      |      |
+* |      | PgUp | Bksp |  Up  |  DEL | PgDn |      |   7  |   8  |   9  |      | Ins  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * |  Tab | Home |  Lft | Down | Right| End  |   .  |   4  |   5  |   6  |   ,  | Enter|
 * |------+------+------+------+------+------|------+------+------+------+------+------|
-* | Shift|      |  Tab | Ins  | Enter|      |   0  |   1  |   2  |   3  |   ;  |Shift |
+* | Shift|      |  Tab |      | Enter|      |   0  |   1  |   2  |   3  |   ;  |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * | Ctrl | GUI  | Alt  |  M3  |  M2  |    Space    |  M2  |  M3  | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 [2] = {
-	{ KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO,   DE_7,    DE_8,  DE_9,    KC_NO,   KC_NO   },
+	{ KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO,   DE_7,    DE_8,  DE_9,    KC_NO,   KC_INS  },
 	{ KC_TAB,  KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  DE_DOT,  DE_4,    DE_5,  DE_6,    DE_COMM, KC_ENT  },
-	{ _______, KC_NO,   KC_TAB,  KC_INS,  KC_ENT,  KC_NO,   DE_0,    DE_1,    DE_2,  DE_3,    DE_SCLN, _______ },
+	{ _______, KC_NO,   KC_TAB,  KC_NO,   KC_ENT,  KC_NO,   DE_0,    DE_1,    DE_2,  DE_3,    DE_SCLN, _______ },
 	{ _______, _______, _______, MO(3),   _______, _______, _______, _______, MO(3), _______, _______, _______ }
 },
 
@@ -94,7 +94,7 @@ accessed by sliding from M2 to M3 with thumb
 */
 
 [3] = {
-	{ KC_NO,   KC_NO,   DE_7,    DE_8,     DE_9,  KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO   },
+	{ KC_NO,   KC_NO,   DE_7,    DE_8,    DE_9,  KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO   },
 	{ _______, DE_DOT,  DE_4,    DE_5,    DE_6,  DE_COMM, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  _______ },
 	{ _______, DE_0,    DE_1,    DE_2,    DE_3,  DE_SCLN, KC_NO,   KC_TAB,  KC_INS,  KC_ENT,  KC_NO,   _______ },
 	{ _______, _______, _______, _______, KC_NO, _______, _______, KC_NO,   _______, _______, _______, _______ }
-- 
cgit v1.2.3


From 4e0bf283f695b4b584bb62d31bb4cd6d7d1f2203 Mon Sep 17 00:00:00 2001
From: Jason Janse van Rensburg <l33tjas.0n@gmail.com>
Date: Sun, 24 Jul 2016 05:11:07 +0200
Subject: added readme

---
 keyboards/planck/keymaps/bone2planck/readme.md | 8 ++++++++
 1 file changed, 8 insertions(+)
 create mode 100644 keyboards/planck/keymaps/bone2planck/readme.md

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/bone2planck/readme.md b/keyboards/planck/keymaps/bone2planck/readme.md
new file mode 100644
index 0000000000..3c425efddb
--- /dev/null
+++ b/keyboards/planck/keymaps/bone2planck/readme.md
@@ -0,0 +1,8 @@
+check keymap.c to the layers
+
+This Layout tries to emulate the Bone2 Variant of Neo2, and is intended to be used with a German QWERTZ Softwarelayout.
+It has "üäöß" as it is optimized for a mix of German & English.
+My favourite features are the placement of the special characters often used for programming right on the home row
+and the number & navigation block combo, so you never have to move your hands from their home position.
+
+Bone2 wiki page: http://wiki.neo-layout.org/wiki/Bone
\ No newline at end of file
-- 
cgit v1.2.3


From 3e462fac3101955ad3561a104c24ca6125e85acd Mon Sep 17 00:00:00 2001
From: Jason Janse van Rensburg <l33tjas.0n@gmail.com>
Date: Mon, 25 Jul 2016 20:21:32 +0200
Subject: added missing F keys in flipped layer

---
 keyboards/planck/keymaps/bone2planck/keymap.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c
index 6390e12897..5abae692c6 100644
--- a/keyboards/planck/keymaps/bone2planck/keymap.c
+++ b/keyboards/planck/keymaps/bone2planck/keymap.c
@@ -123,19 +123,19 @@ slide from m4 to m5 to access flipped version
 
 /* flipped Function & Media Keys
 * ,-----------------------------------------------------------------------------------.
-* |      |      |  F7  |  F8  |  F9  |      |      | Print|Scroll| Pause|      |      |
+* |      |      |  F7  |  F8  |  F9  |  F12 |      | Print|Scroll| Pause|      |      |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
-* |      |  ³   |  F4  |  F5  |  F6  |      |      | Mute | Vol- | Vol+ |      |      |
+* |      |  ³   |  F4  |  F5  |  F6  |  F11 |      | Mute | Vol- | Vol+ |      |      |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
-* | Shift|  ²   |  F1  |  F2  |  F3  |      |      | Prev | Play | Next |      |Shift |
+* | Shift|  ²   |  F1  |  F2  |  F3  |  F10 |      | Prev | Play | Next |      |Shift |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * | Ctrl | GUI  | Alt  |      |  M5  |    Space    |  M5  |      | Alt  | Esc  | Ctrl |
 * `-----------------------------------------------------------------------------------'
 */
 [5] = {
-	{ KC_NO,   KC_NO,   KC_F7,   KC_F8, KC_F9,   KC_NO,   KC_NO,   KC_PSCR, KC_SLCK, KC_PAUS, KC_NO,   KC_NO   },
-	{ KC_NO,   DE_SQ3,  KC_F4,   KC_F5, KC_F6,   KC_NO,   KC_NO,   KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   KC_NO   },
-	{ _______, DE_SQ2,  KC_F1,   KC_F2, KC_F3,   KC_NO,   KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   _______ },
+	{ KC_NO,   KC_NO,   KC_F7,   KC_F8, KC_F9,   KC_F12,  KC_NO,   KC_PSCR, KC_SLCK, KC_PAUS, KC_NO,   KC_NO   },
+	{ KC_NO,   DE_SQ3,  KC_F4,   KC_F5, KC_F6,   KC_F11,  KC_NO,   KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   KC_NO   },
+	{ _______, DE_SQ2,  KC_F1,   KC_F2, KC_F3,   KC_F10,  KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   _______ },
 	{ _______, _______, _______, KC_NO, _______, _______, _______, _______, KC_NO,   _______, _______, _______ }
 }
 };
-- 
cgit v1.2.3


From 8244fa40ccd89ad16ddc00210d5b1b169fb655c2 Mon Sep 17 00:00:00 2001
From: Jason Janse van Rensburg <l33tjas.0n@gmail.com>
Date: Tue, 26 Jul 2016 14:58:17 +0200
Subject: added config.h, and missing Ins of filpped navigation layer

---
 keyboards/planck/keymaps/bone2planck/config.h | 90 +++++++++++++++++++++++++++
 keyboards/planck/keymaps/bone2planck/keymap.c |  6 +-
 2 files changed, 93 insertions(+), 3 deletions(-)
 create mode 100644 keyboards/planck/keymaps/bone2planck/config.h

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/bone2planck/config.h b/keyboards/planck/keymaps/bone2planck/config.h
new file mode 100644
index 0000000000..ba157db92a
--- /dev/null
+++ b/keyboards/planck/keymaps/bone2planck/config.h
@@ -0,0 +1,90 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define PREVENT_STUCK_MODIFIERS
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define MANUFACTURER    Ortholinear Keyboards
+#define PRODUCT         The Planck Keyboard
+#define DESCRIPTION     A compact ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
+#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#ifdef SUBPROJECT_rev3
+    #include "rev3/config.h"
+#endif
+#ifdef SUBPROJECT_rev4
+    #include "rev4/config.h"
+#endif
+
+#endif
diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c
index 5abae692c6..7db3197a72 100644
--- a/keyboards/planck/keymaps/bone2planck/keymap.c
+++ b/keyboards/planck/keymaps/bone2planck/keymap.c
@@ -5,7 +5,7 @@
 #endif
 #include "keymap_german.h"
 
-// for intellisense, comment for building
+// for intellisense, has to be commented for building
 /*
 #include "..\..\..\..\quantum\keymap_extras\keymap_german.h"
 #include "..\..\..\..\quantum\keymap_common.h"
@@ -83,7 +83,7 @@ very easy to get used to & intuituve placement
 /* Flipped Navigation & Number Blocks for one handed use
 accessed by sliding from M2 to M3 with thumb
 * ,-----------------------------------------------------------------------------------.
-* |      |      |  7   |  8   |  9   |      | PgUp | Bksp |  Up  |  DEL | PgDn |      |
+* | Ins  |      |  7   |  8   |  9   |      | PgUp | Bksp |  Up  |  DEL | PgDn |      |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * |  Tab |  .   |  4   |  5   |  6   |   ,  | Home | Left | Down | Right| End  | Enter|
 * |------+------+------+------+------+------|------+------+------+------+------+------|
@@ -94,7 +94,7 @@ accessed by sliding from M2 to M3 with thumb
 */
 
 [3] = {
-	{ KC_NO,   KC_NO,   DE_7,    DE_8,    DE_9,  KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO   },
+	{ KC_INS,   KC_NO,   DE_7,    DE_8,    DE_9,  KC_NO,   KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, KC_NO   },
 	{ _______, DE_DOT,  DE_4,    DE_5,    DE_6,  DE_COMM, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  _______ },
 	{ _______, DE_0,    DE_1,    DE_2,    DE_3,  DE_SCLN, KC_NO,   KC_TAB,  KC_INS,  KC_ENT,  KC_NO,   _______ },
 	{ _______, _______, _______, _______, KC_NO, _______, _______, KC_NO,   _______, _______, _______, _______ }
-- 
cgit v1.2.3


From a41a7a9100b9f4c6bfdf49b39b05e626ffd95397 Mon Sep 17 00:00:00 2001
From: Jason Janse van Rensburg <l33tjas.0n@gmail.com>
Date: Tue, 26 Jul 2016 16:19:34 +0200
Subject: include base config.h instead of copying it

---
 keyboards/planck/keymaps/bone2planck/config.h | 93 ++-------------------------
 1 file changed, 5 insertions(+), 88 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/bone2planck/config.h b/keyboards/planck/keymaps/bone2planck/config.h
index ba157db92a..60aff6db0d 100644
--- a/keyboards/planck/keymaps/bone2planck/config.h
+++ b/keyboards/planck/keymaps/bone2planck/config.h
@@ -1,90 +1,7 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define PREVENT_STUCK_MODIFIERS
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         The Planck Keyboard
-#define DESCRIPTION     A compact ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#ifdef SUBPROJECT_rev3
-    #include "rev3/config.h"
-#endif
-#ifdef SUBPROJECT_rev4
-    #include "rev4/config.h"
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 #endif
 
-#endif
+#include "../../config.h"
+
+#define PREVENT_STUCK_MODIFIERS
\ No newline at end of file
-- 
cgit v1.2.3


From 6ff8a8152035a32f6521d09d91594eeba269486d Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Wed, 27 Jul 2016 21:11:55 +0200
Subject: first try ar adding the parenthesis mess for german iso

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 545cb1ab18..4bd990d375 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -32,25 +32,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
             CTL_T(KC_ESC),   KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT,        KC_NUHS,         CTL_T(KC_ENT),   \
             KC_LSFT,         KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH,        TG(_SFX),        SFT_T(KC_UP),    \
             KC_LCTL,         KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN),  CTL_T(KC_RIGHT)),
+
     /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
      * ,-----------------------------------------------------------.
      * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
      * |-----------------------------------------------------------|
-     * |    |Paus| Up|   |   |   |   |   |   |   |   |   |   |     |
+     * |    |Paus| Up| [ | ] |   |   |   | ( | ) |   |   |   |     |
      * |-----------------------------------------------------------|
      * |      |Lft|Dwn|Rgt|   |   |   |Left|Down|Right|Up|  | PLAY |
      * |-----------------------------------------------------------|
-     * |        |   |   |   |   |   |M0 |   |   |   |   | Vol+ |   |
+     * |        |   |   | < | > |   |M0 |   | { | } |   | Vol+ |   |
      * |-----------------------------------------------------------|
      * |    |    |    |                        |Alt |Prev|Vol-|Next|
      * `-----------------------------------------------------------'
      */
     [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
-            KC_PSCR, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
-            KC_TRNS, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-            KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
-            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
-            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
+            KC_PSCR, KC_F1,   KC_F2,   KC_F3,      KC_F4,      KC_F5,         KC_F6,   KC_F7,      KC_F8,      KC_F9,      KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+            KC_TRNS, KC_PAUS, KC_UP,   RALT(KC_8), RALT(KC_9), KC_TRNS,       KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+            KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,   KC_TRNS,    KC_TRNS,       KC_LEFT, KC_DOWN,    KC_UP,      KC_RGHT,    KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_NUBS,    LSFT(KC_NUBS), KC_SPACE,M(0),       RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
+            KC_TRNS, KC_TRNS, KC_TRNS,                                        KC_TRNS,                                     KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
 
     /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
      * ,-----------------------------------------------------------.
-- 
cgit v1.2.3


From 684d869fab8bf513b2939ea544068f115b9d7b85 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 28 Jul 2016 11:58:53 +0200
Subject: added homerow-ish brackets

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 4bd990d375..7af7c14bd8 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -21,7 +21,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |-----------------------------------------------------------|
      * |Ctrl   | A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
      * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2| RShift is UP
+     * |Sft | < |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2| RShift is UP
      * |-----------------------------------------------------------|
      * |Ctrl|Win |Alt |      Space/Fn0         |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is 
      * `-----------------------------------------------------------'   LEFT DWN RIGHT
@@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |-----------------------------------------------------------|
      * |      |Lft|Dwn|Rgt|   |   |   |Left|Down|Right|Up|  | PLAY |
      * |-----------------------------------------------------------|
-     * |        |   |   | < | > |   |M0 |   | { | } |   | Vol+ |   |
+     * |    |   |   |   | < | > |   |M0 |   | { | } |   | Vol+ |   |
      * |-----------------------------------------------------------|
      * |    |    |    |                        |Alt |Prev|Vol-|Next|
      * `-----------------------------------------------------------'
@@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |-----------------------------------------------------------|
      * |      |   |   |   |   |   |   |Pos1|PgDn|PgUp|End|  |Retrn |
      * |-----------------------------------------------------------|
-     * |        |   |   |   |   |   |AF2|   |   |   |   | PgUp |   |
+     * |    |   |   |   |   |   |   |AF2|   |   |   |   | PgUp |   |
      * |-----------------------------------------------------------|
      * |    |    |    |                        |Alt |Pos1|PgDn|End |
      * `-----------------------------------------------------------'
@@ -81,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |-----------------------------------------------------------|
      * |      | L | L |   |   |   |   | 1 | 2 | 3 |   |   | Return |
      * |-----------------------------------------------------------|
-     * |        | L | L | L | L | L | L |   | 0 |   |  /|  Up  |   | All "L"s represent
+     * |    |   | L | L | L | L | L | L |   | 0 |   |  /|  Up  |   | All "L"s represent
      * |-----------------------------------------------------------| LED controlling
      * |Ctrl|Win |Alt |                        |Alt |Left|Down|Right|
      * `-----------------------------------------------------------'
-- 
cgit v1.2.3


From dcf672223f20412ae79eb73a58d80ccbb0bd5c31 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Fri, 5 Aug 2016 20:53:58 +0200
Subject: enterfn / enterisctrl on hold added

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 7af7c14bd8..3ee141eb45 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -17,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ,-----------------------------------------------------------.
      * |Grv|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
      * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   \ | Tab is Fn1 !!
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   \ | Tab is Fn1
      * |-----------------------------------------------------------|
      * |Ctrl   | A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
      * |-----------------------------------------------------------|
@@ -107,15 +107,15 @@ enum function_id {
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_FUNCTION(LAUNCH),
-    [2] = ACTION_FUNCTION(RGBLED_TOGGLE),
-    [3] = ACTION_FUNCTION(RGBLED_STEP_MODE),
-    [4] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
-    [5] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
-    [6] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
-    [7] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
-    [8] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
-    [9] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+    [1]  = ACTION_FUNCTION(LAUNCH),
+    [2]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+    [3]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
+    [4]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+    [5]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+    [6]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+    [7]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+    [8]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+    [9]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
     [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
 };
 
-- 
cgit v1.2.3


From b5fcb5a7447424a160b86b4d2c0d2ea29ae1d813 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Sun, 7 Aug 2016 11:37:28 +0200
Subject: new variant with the curly braces on tab layer

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 48 +++++++++++------------
 1 file changed, 24 insertions(+), 24 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 3ee141eb45..71c205a489 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -27,11 +27,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'   LEFT DWN RIGHT
      */
     [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
-            KC_GRV,          KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS,        KC_EQL,          KC_BSPC,         \
-            LT(_TAB,KC_TAB), KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC,        KC_RBRC,         KC_BSLS,         \
-            CTL_T(KC_ESC),   KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT,        KC_NUHS,         CTL_T(KC_ENT),   \
-            KC_LSFT,         KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH,        TG(_SFX),        SFT_T(KC_UP),    \
-            KC_LCTL,         KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN),  CTL_T(KC_RIGHT)),
+        KC_GRV,          KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS,        KC_EQL,          KC_BSPC,         \
+        LT(_TAB,KC_TAB), KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC,        KC_RBRC,         KC_BSLS,         \
+        CTL_T(KC_ESC),   KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT,        KC_NUHS,         CTL_T(KC_ENT),   \
+        KC_LSFT,         KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH,        TG(_SFX),        SFT_T(KC_UP),    \
+        KC_LCTL,         KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN),  CTL_T(KC_RIGHT)),
 
     /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
      * ,-----------------------------------------------------------.
@@ -39,27 +39,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |-----------------------------------------------------------|
      * |    |Paus| Up| [ | ] |   |   |   | ( | ) |   |   |   |     |
      * |-----------------------------------------------------------|
-     * |      |Lft|Dwn|Rgt|   |   |   |Left|Down|Right|Up|  | PLAY |
+     * |      |Lft|Dwn|Rgt|   |   |Left|Down|Right|Up|  |   | PLAY |
      * |-----------------------------------------------------------|
-     * |    |   |   |   | < | > |   |M0 |   | { | } |   | Vol+ |   |
+     * |    |   |   |   | < | > |   |M0 |   |   |   |   | Vol+ |   |
      * |-----------------------------------------------------------|
      * |    |    |    |                        |Alt |Prev|Vol-|Next|
      * `-----------------------------------------------------------'
      */
     [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
-            KC_PSCR, KC_F1,   KC_F2,   KC_F3,      KC_F4,      KC_F5,         KC_F6,   KC_F7,      KC_F8,      KC_F9,      KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
-            KC_TRNS, KC_PAUS, KC_UP,   RALT(KC_8), RALT(KC_9), KC_TRNS,       KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-            KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,   KC_TRNS,    KC_TRNS,       KC_LEFT, KC_DOWN,    KC_UP,      KC_RGHT,    KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
-            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_NUBS,    LSFT(KC_NUBS), KC_SPACE,M(0),       RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
-            KC_TRNS, KC_TRNS, KC_TRNS,                                        KC_TRNS,                                     KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
+        KC_PSCR, KC_F1,   KC_F2,   KC_F3,      KC_F4,      KC_F5,         KC_F6,   KC_F7,      KC_F8,      KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+        KC_TRNS, KC_PAUS, KC_UP,   RALT(KC_8), RALT(KC_9), KC_TRNS,       KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,   KC_TRNS,    KC_TRNS,       KC_LEFT, KC_DOWN,    KC_UP,      KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_NUBS,    LSFT(KC_NUBS), KC_SPACE,M(0),       KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                                        KC_TRNS,                                  KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
 
     /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
      * ,-----------------------------------------------------------.
      * |WAKE|   |   |   |   |   |   |   |   |   |   |   |   |Insert|  TAB+GRC = WAKE
      * |-----------------------------------------------------------|
-     * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+     * |     |   |   |   |   |   |   |   | { | } |   |   |   |     |
      * |-----------------------------------------------------------|
-     * |      |   |   |   |   |   |   |Pos1|PgDn|PgUp|End|  |Retrn |
+     * |      |   |   |   |   |   |Pos1|PgDn|PgUp|End|  |   |Retrn |
      * |-----------------------------------------------------------|
      * |    |   |   |   |   |   |   |AF2|   |   |   |   | PgUp |   |
      * |-----------------------------------------------------------|
@@ -67,11 +67,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
-            KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
-            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
-            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
-            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+        KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP,    KC_END,     KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),    KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                  KC_TRNS, KC_HOME, KC_PGDN, KC_END),
 
     /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
      * ,-----------------------------------------------------------.
@@ -87,11 +87,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
-            RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
-            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
-            KC_TRNS, F(2),    F(3),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3, KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
-            KC_TRNS, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
-            KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT),
+        RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
+        KC_TRNS, F(2),    F(3),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3, KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
+        KC_TRNS, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT),
 };
 
 enum function_id {
-- 
cgit v1.2.3


From 76cd7c5444471c7fbf0f648088cac13f4c79af57 Mon Sep 17 00:00:00 2001
From: Corey Finley <finley.corey@gmail.com>
Date: Fri, 5 Aug 2016 09:08:55 -0400
Subject: Adds keymap based on Kinesis advantage

---
 keyboards/preonic/keymaps/kinesis/Makefile  |  27 ++++++
 keyboards/preonic/keymaps/kinesis/config.h  |  92 ++++++++++++++++++
 keyboards/preonic/keymaps/kinesis/keymap.c  | 144 ++++++++++++++++++++++++++++
 keyboards/preonic/keymaps/kinesis/readme.md |   1 +
 4 files changed, 264 insertions(+)
 create mode 100644 keyboards/preonic/keymaps/kinesis/Makefile
 create mode 100644 keyboards/preonic/keymaps/kinesis/config.h
 create mode 100644 keyboards/preonic/keymaps/kinesis/keymap.c
 create mode 100644 keyboards/preonic/keymaps/kinesis/readme.md

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/kinesis/Makefile b/keyboards/preonic/keymaps/kinesis/Makefile
new file mode 100644
index 0000000000..6c8d2897cd
--- /dev/null
+++ b/keyboards/preonic/keymaps/kinesis/Makefile
@@ -0,0 +1,27 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+TAP_DANCE_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h
new file mode 100644
index 0000000000..086baa84ff
--- /dev/null
+++ b/keyboards/preonic/keymaps/kinesis/config.h
@@ -0,0 +1,92 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6061
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ortholinear Keyboards
+#define PRODUCT         The Preonic Keyboard
+#define DESCRIPTION     A compact ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 }
+#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D1
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 28     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+#define TAPPING_TERM 200
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/preonic/keymaps/kinesis/keymap.c b/keyboards/preonic/keymaps/kinesis/keymap.c
new file mode 100644
index 0000000000..1cd6eb9938
--- /dev/null
+++ b/keyboards/preonic/keymaps/kinesis/keymap.c
@@ -0,0 +1,144 @@
+#include "preonic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef AUDIO_ENABLE
+#include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN 1
+#define _ULCK 2
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define HYP_TIC ALL_T(KC_GRV)
+#define EQ_LOCK TD(TD_EQ_LOCK)
+#define MIN_ULK TD(TD_MIN_ULOCK)
+
+//Tap Dance Declarations
+enum {
+  TD_EQ_LOCK = 0,
+  TD_MIN_ULOCK
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------.
+   * |   =  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  -   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  \   |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |  FN  |   `  | Alt  | LGUI | Back | ESC  |ENTER | SPCE | RGUI |   [  |  ]   |  FN  |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = {
+    {EQ_LOCK, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    MIN_ULK },
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS },
+    {KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT },
+    {KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC },
+    {MO(_FN), HYP_TIC, KC_LALT, KC_LGUI, KC_BSPC, KC_ESC,  KC_ENT,  KC_SPC,  KC_RGUI, KC_LBRC, KC_RBRC, MO(_FN) }
+  },
+
+  /* Fn
+   * ,-----------------------------------------------------------------------------------.
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |      |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * |      |  F11 |  F12 |  F13 |  F14 |  F15 |  F16 |  F17 |  F18 |  F19 |  F20 |      |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * |      | VOL- | VOL+ | MUTE |BLtogg|      | LEFT | DOWN |  UP  | RGHT |      |      |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      | BL-  | BL+  |Aud on|AudOff|AGnorm|AGswap|      |      |      |      |      |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |Voice-|Voice+|Mus on|MusOff|      |      |PLY/PS|      | PREV | NEXT |      |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_FN] = {
+    {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______ },
+    {_______, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  _______ },
+    {_______, KC_VOLD, KC_VOLU, KC_MUTE, BL_TOGG, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______ },
+    {_______, BL_DEC,  BL_INC,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, _______, _______, _______, _______, _______ },
+    {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  _______, _______, KC_MPLY, _______, KC_MPRV, KC_MNXT, _______ }
+  }
+
+};
+
+float tone_startup[][2] = {
+  {NOTE_B5, 20},
+  {NOTE_B6, 8},
+  {NOTE_DS6, 20},
+  {NOTE_B6, 8}
+};
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+float music_scale[][2]  = SONG(MUSIC_SCALE_SOUND);
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {*/
+  /*return true;*/
+  /*[>switch (keycode) {<]*/
+    /*[>case QWERTY:<]*/
+      /*[>return true;<]*/
+  /*[>}<]*/
+/*};*/
+
+void matrix_init_user(void) {
+  startup_user();
+}
+
+void startup_user()
+{
+  _delay_ms(20); // gets rid of tick
+  PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+  PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+  _delay_ms(150);
+  stop_all_notes();
+}
+
+void music_on_user(void)
+{
+  music_scale_user();
+}
+
+void music_scale_user(void)
+{
+  PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+
+const qk_tap_dance_action_t tap_dance_actions[] = {
+  //Tap once for equal, twice for hyper + X (alfred lock)
+  [TD_EQ_LOCK] = ACTION_TAP_DANCE_DOUBLE(KC_EQL,  HYPR(KC_X)),
+  //Tap once for minus, twice for time.heals.nothing
+  [TD_MIN_ULOCK] = ACTION_TAP_DANCE_DOUBLE(KC_MINS, M(_ULCK))
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    case _ULCK:
+      if (record->event.pressed) {
+        /* time.heals.nothing */
+        return MACRO( I(220), T(T), T(I), T(M), T(E), T(DOT), T(H), T(E), T(A), T(L), T(S), T(DOT), T(N), T(O), T(T), T(H), T(I), T(N), T(G), END);
+      }
+      break;
+  }
+  return MACRO_NONE;
+};
diff --git a/keyboards/preonic/keymaps/kinesis/readme.md b/keyboards/preonic/keymaps/kinesis/readme.md
new file mode 100644
index 0000000000..e911968dd9
--- /dev/null
+++ b/keyboards/preonic/keymaps/kinesis/readme.md
@@ -0,0 +1 @@
+# The default Preonic layout - largely based on the Planck's
\ No newline at end of file
-- 
cgit v1.2.3


From 552399df4cef88463ea8ac40822d776d0fb90e18 Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 18:34:08 -0700
Subject: Adding my own keymaps to the following keyboards:

Planck, Preonic, Atreus, Ergodox
---
 keyboards/atreus/keymaps/xyverz/keymap.c      |  89 ++++++
 keyboards/ergodox/keymaps/xyverz/dvorak.png   | Bin 0 -> 87314 bytes
 keyboards/ergodox/keymaps/xyverz/keymap.c     | 184 +++++++++++++
 keyboards/ergodox/keymaps/xyverz/old_keymap.c | 311 +++++++++++++++++++++
 keyboards/ergodox/keymaps/xyverz/readme.md    |  10 +
 keyboards/planck/keymaps/xyverz/README.md     |   2 +
 keyboards/planck/keymaps/xyverz/keymap.c      | 379 ++++++++++++++++++++++++++
 keyboards/planck/keymaps/xyverz/makefile.mk   |   2 +
 keyboards/preonic/keymaps/xyverz/README.md    |  49 ++++
 keyboards/preonic/keymaps/xyverz/keymap.c     | 342 +++++++++++++++++++++++
 keyboards/preonic/keymaps/xyverz/makefile.mk  |   1 +
 11 files changed, 1369 insertions(+)
 create mode 100644 keyboards/atreus/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/ergodox/keymaps/xyverz/dvorak.png
 create mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/ergodox/keymaps/xyverz/old_keymap.c
 create mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md
 create mode 100644 keyboards/planck/keymaps/xyverz/README.md
 create mode 100644 keyboards/planck/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/planck/keymaps/xyverz/makefile.mk
 create mode 100644 keyboards/preonic/keymaps/xyverz/README.md
 create mode 100644 keyboards/preonic/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/preonic/keymaps/xyverz/makefile.mk

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..447fbcf10f
--- /dev/null
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -0,0 +1,89 @@
+// This is the personal keymap of Ian Sterling (@xyverz). It is based on the keymap by
+// Chris Gerber (@gerbercj), with the addition of persistent layers like the Planck and
+// Preonic keyboards by Jack Humbert.
+
+#include "atreus.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DV 0
+#define _QW 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DV] = { /* Dvorak */
+    {KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_NO,   KC_F,    KC_G,    KC_C,    KC_R,    KC_L   },
+    {KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_NO,   KC_D,    KC_H,    KC_T,    KC_N,    KC_S   },
+    {SFT_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, CTL_T(KC_DEL),  KC_B,  KC_M,  KC_W,  KC_V,   SFT_T(KC_Z) },
+    {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_EQL}
+  },
+  [_QW] = { /* Qwerty */
+    {KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_NO,   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   },
+    {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_NO,   KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN},
+    {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH)  },
+    {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT}
+  },
+  [_CM] = { /* Colemak */
+    {KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_NO,   KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN},
+    {KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_NO,   KC_H,    KC_N,    KC_E,    KC_I,    KC_O   },
+    {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_K, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH)  },
+    {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT}
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_NO,   KC_6,    KC_7,    KC_8,    KC_9,    KC_0   },
+    {KC_TAB,  KC_INS,  KC_UP,   KC_DEL,  KC_HOME, KC_NO,   KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
+    {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
+    {KC_TRNS, KC_GRV,  KC_LGUI, KC_TRNS, KC_DEL,  KC_LALT, KC_SPC,  KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
+  },
+  [_L2] = { /* LAYER 2 */
+    {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
+    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 },
+    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12 },
+    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, RESET  }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/ergodox/keymaps/xyverz/dvorak.png b/keyboards/ergodox/keymaps/xyverz/dvorak.png
new file mode 100644
index 0000000000..cb83163095
Binary files /dev/null and b/keyboards/ergodox/keymaps/xyverz/dvorak.png differ
diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..dd39dbacb2
--- /dev/null
+++ b/keyboards/ergodox/keymaps/xyverz/keymap.c
@@ -0,0 +1,184 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ]    |   1  |   2  |   3  |   4  |   5  |  ESC |           |  ESC |   6  |   7  |   8  |   9  |   0  |   \    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   '  |   ,  |   .  |   P  |   Y  |  L1  |           |  L1  |   F  |   G  |   C  |   R  |   L  |   /    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |S / L2|   -    |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |:/Ctrl|   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |Z/Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        KC_RBRC,        KC_1,           KC_2,    KC_3,   KC_4,   KC_5,   KC_ESC,
+        KC_DELT,        KC_QUOT,        KC_COMM, KC_DOT, KC_P,   KC_Y,   TG(1),
+        KC_BSPC,        KC_A,           KC_O,    KC_E,   KC_U,   KC_I,
+        KC_LSFT,        CTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   ALL_T(KC_NO),
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
+                                              ALT_T(KC_APP),  KC_LGUI,
+                                                              KC_HOME,
+                                               KC_SPC,KC_BSPC,KC_END,
+        // right hand
+             KC_ESC,      KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_LBRC,
+             TG(1),       KC_F,   KC_G,   KC_C,   KC_R,   KC_L,             KC_BSLS,
+                          KC_D,   KC_H,   KC_T,   KC_N,   LT(MDIA, KC_S),   KC_MINS,
+             MEH_T(KC_NO),KC_B,   KC_M,   KC_W,   KC_V,   CTL_T(KC_Z),      KC_RSFT,
+                                  KC_UP,  KC_DOWN,KC_SLSH,KC_EQL,          KC_FN1,
+             KC_LALT,        CTL_T(KC_ESC),
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          register_code(KC_RSFT);
+        } else {
+          unregister_code(KC_RSFT);
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/ergodox/keymaps/xyverz/old_keymap.c b/keyboards/ergodox/keymaps/xyverz/old_keymap.c
new file mode 100644
index 0000000000..e082372f9b
--- /dev/null
+++ b/keyboards/ergodox/keymaps/xyverz/old_keymap.c
@@ -0,0 +1,311 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DVORAK 0 // default layer
+#define _QWERTY 1 // symbols
+#define _LOWER 2
+#define _RAISE 3
+#define _ADJUST 16
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*
+ * Keymap 0: Dvorak
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ]    |   1  |   2  |   3  |   4  |   5  |  Esc |           |  ESC |   6  |   7  |   8  |   9  |   0  |   [    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   '  |   ,  |   .  |   Y  |   Y  |(Null)|           |(Null)|   F  |   G  |   C  |   R  |   L  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
+ * |--------+------+------+------+------+------| FN1  |           | FN2  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ *
+ *
+ *****************************************************************************************************
+ * This Dvorak keyboard layout stems from my early Kinesis years, using the Contour PS/2 with a Dvorak
+ * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the cor-
+ * ner keys. I've decided to continue using this layout with my ErgoDox.
+ */
+
+ [_DVORAK] = (
+	KC_RBRC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,   KC_ESC,
+	KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,   XXXXXXX,
+	KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,
+	KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,   LOWER,
+	KC_LGUI, KC_GRV,  KC_INS,  KC_LEFT, KC_RGHT,
+				   KC_LCTL, KC_LALT,
+						KC_HOME,
+			    KC_BSPC,  KC_DEL,   KC_END,
+        // right hand
+	KC_ESC,   KC_6,     KC_7,     KC_8,     KC_9,     KC_0,    KC_LBRC,
+	NO,       KC_F,     KC_G,     KC_C,     KC_R,     KC_L,    KC_BSLS,
+		  KC_D,     KC_H,     KC_T,     KC_N,     KC_S,    KC_MINS,
+	RAISE,    KC_B,     KC_M,     KC_W,     KC_V,     KC_Z,    KC_RSFT,
+			    KC_UP,    KC_DOWN,  KC_SLSH,  KC_EQL,  KC_RGUI,
+        KC_RALT,  KC_RCTL,
+        KC_PGUP,
+        KC_PGDN,  KC_ENT,   KC_SPC
+),
+
+/* Keymap 1: QWERTY
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+[_QWERTY] = (
+        KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   KC_NO,
+        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   LOWER,
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
+                                              {ALT_T(KC_APP),  KC_LGUI,
+                                                              KC_HOME,
+                                               KC_SPC,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
+             KC_NO,    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+             RAISE, KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                                  KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
+             KC_LALT,        CTL_T(KC_ESC),
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_ENT
+),
+
+
+/* Lower 2: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+[_LOWER] = (
+       // left hand
+       KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+
+/* Raise 3: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[_RAISE] = (
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+
+/* Adjust 16: Lower + Raise
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        | Reset|      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |Dvorak|Qwerty|      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[_ADJUST] = (
+       KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, QWERTY,  DVORAK,  KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DVORAK:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DVORAK);
+          }
+          break;
+        case _QWERTY:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          break;
+        case _LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+        case _RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+
+      }
+    return MACRO_NONE;
+};
+
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
new file mode 100644
index 0000000000..8f6dba45e9
--- /dev/null
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -0,0 +1,10 @@
+# ErgoDox EZ Default Configuration
+
+## Changelog
+
+* Feb 2, 2016 (V1.1): 
+  * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows).
+
+This is what we ship with out of the factory. :) The image says it all:
+
+![Default](default_highres.png)
diff --git a/keyboards/planck/keymaps/xyverz/README.md b/keyboards/planck/keymaps/xyverz/README.md
new file mode 100644
index 0000000000..b0054fc305
--- /dev/null
+++ b/keyboards/planck/keymaps/xyverz/README.md
@@ -0,0 +1,2 @@
+# Zrevyx's Planck Layout
+
diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..9ac78ec15d
--- /dev/null
+++ b/keyboards/planck/keymaps/xyverz/keymap.c
@@ -0,0 +1,379 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _MUSIC 5
+#define _PLOVER 6
+#define _ADJUST 16
+
+// Macro name shortcuts
+#define QWERTY M(_QWERTY)
+#define COLEMAK M(_COLEMAK)
+#define DVORAK M(_DVORAK)
+#define LOWER M(_LOWER)
+#define RAISE M(_RAISE)
+#define M_BL 5
+#define AUD_OFF M(6)
+#define AUD_ON M(7)
+#define MUS_OFF M(8)
+#define MUS_ON M(9)
+#define VC_IN M(10)
+#define VC_DE M(11)
+#define PLOVER M(12)
+#define EXT_PLV M(13)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |  /   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | Left |Right |Lower | Bksp |Space |Raise |  Up  | Down |  GUI |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT},
+  {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Mute | Vol- | Vol+ |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |  Del |  Ins |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MUTE, KC_VOLD, KC_VOLU, _______, _______},
+  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Prev | Play | Next |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |  Del |  Ins |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MPRV, KC_MPLY, KC_MNXT, _______, _______},
+  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Music (reserved for process_action_user)
+ *
+ */
+[_MUSIC] = {
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER,   XXXXXXX, XXXXXXX, RAISE,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AUD_ON,  AUD_OFF, AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, VC_DE,   VC_IN,   MUS_ON,  MUS_OFF, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_startup[][2] = {
+  {440.0*pow(2.0,(31)/12.0), 12},
+  {440.0*pow(2.0,(28)/12.0), 8},
+  {440.0*pow(2.0,(19)/12.0), 8},
+  {440.0*pow(2.0,(24)/12.0), 8},
+  {440.0*pow(2.0,(28)/12.0), 20}
+};
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+float goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _QWERTY:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          break;
+        case _COLEMAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_COLEMAK);
+          }
+          break;
+        case _DVORAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_DVORAK);
+          }
+          break;
+        case _LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+        case _RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+        case M_BL:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+        case 6:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              audio_off();
+            #endif
+          }
+        break;
+        case 7:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              audio_on();
+              PLAY_NOTE_ARRAY(tone_startup, false, 0);
+            #endif
+          }
+        break;
+        case 8:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              layer_off(_MUSIC);
+              stop_all_notes();
+            #endif
+          }
+        break;
+        case 9:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+              layer_on(_MUSIC);
+            #endif
+          }
+        break;
+        case 10:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              voice_iterate();
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+            #endif
+          }
+        break;
+        case 11:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              voice_deiterate();
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+            #endif
+          }
+        break;
+        case 12:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_plover, false, 0);
+            #endif
+            layer_off(_RAISE);
+            layer_off(_LOWER);
+            layer_off(_ADJUST);
+            layer_off(_MUSIC);
+            stop_all_notes();
+            layer_on(_PLOVER);
+            if (!eeconfig_is_enabled()) {
+                eeconfig_init();
+            }
+            keymap_config.raw = eeconfig_read_keymap();
+            keymap_config.nkro = 1;
+            eeconfig_update_keymap(keymap_config.raw);
+          }
+        break;
+        case 13:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+            #endif
+            layer_off(_PLOVER);
+          }
+        break;
+
+      }
+    return MACRO_NONE;
+};
+
+void matrix_init_user(void) {
+  #ifdef AUDIO_ENABLE
+    _delay_ms(20); // stops the tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+  #endif
+}
+
+#ifdef AUDIO_ENABLE
+void play_goodbye_tone()
+{
+  PLAY_NOTE_ARRAY(goodbye, false, 0);
+  _delay_ms(150);
+}
+
+uint8_t starting_note = 0x0C;
+int offset = 7;
+
+void process_action_user(keyrecord_t *record) {
+
+  if (IS_LAYER_ON(_MUSIC)) {
+    if (record->event.pressed) {
+        play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF);
+    } else {
+        stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)));
+    }
+  }
+
+}
+#endif
diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk
new file mode 100644
index 0000000000..99fbfbd0bb
--- /dev/null
+++ b/keyboards/planck/keymaps/xyverz/makefile.mk
@@ -0,0 +1,2 @@
+AUDIO_ENABLE = yes
+NKRO_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/preonic/keymaps/xyverz/README.md b/keyboards/preonic/keymaps/xyverz/README.md
new file mode 100644
index 0000000000..9c23c5b9f3
--- /dev/null
+++ b/keyboards/preonic/keymaps/xyverz/README.md
@@ -0,0 +1,49 @@
+# The default Preonic layout - largely based on the Planck's
+
+## QWERTY Layer:
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |  -   |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  Alt | Left |Right |Lower |    Space    |Raise |  Up  | Down |  GUI |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+## LOWER Layer:
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Mute | Vol- | Vol+ |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+## RAISE Layer:
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Prev | Play | Next |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
\ No newline at end of file
diff --git a/keyboards/preonic/keymaps/xyverz/keymap.c b/keyboards/preonic/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..adc7392e5c
--- /dev/null
+++ b/keyboards/preonic/keymaps/xyverz/keymap.c
@@ -0,0 +1,342 @@
+#include "preonic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _MUSIC 5
+#define _ADJUST 16
+
+// Macro name shortcuts
+#define QWERTY M(_QWERTY)
+#define COLEMAK M(_COLEMAK)
+#define DVORAK M(_DVORAK)
+#define LOWER M(_LOWER)
+#define RAISE M(_RAISE)
+#define M_BL 5
+#define AUD_OFF M(6)
+#define AUD_ON M(7)
+#define MUS_OFF M(8)
+#define MUS_ON M(9)
+#define VC_IN M(10)
+#define VC_DE M(11)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |  -   |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  Alt | Left |Right |Lower |    Space    |Raise |  Up  | Down |  GUI |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL},
+  {KC_MINS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT},
+  {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |  /   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | Left |Right |Lower |    Space    |Raise |  Up  | Down |  GUI |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT},
+  {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Mute | Vol- | Vol+ |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MUTE, KC_VOLD, KC_VOLU, _______, _______},
+  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_INS,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Prev | Play | Next |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MPRV, KC_MPLY, KC_MNXT, _______, _______},
+  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_INS,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Music (reserved for process_action_user)
+ *
+ */
+[_MUSIC] = {
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER,   XXXXXXX, XXXXXXX, RAISE,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Musoff|Mus on|      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AUD_ON,  AUD_OFF, AG_NORM, AG_SWAP,  QWERTY, COLEMAK, DVORAK,  _______, _______},
+  {_______, VC_DE,   VC_IN,   MUS_ON,  MUS_OFF, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+#ifdef AUDIO_ENABLE
+float start_up[][2] = {
+  {440.0*pow(2.0,(14)/12.0), 20},
+  {440.0*pow(2.0,(26)/12.0), 8},
+  {440.0*pow(2.0,(18)/12.0), 20},
+  {440.0*pow(2.0,(26)/12.0), 8}
+};
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+float goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _QWERTY:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          break;
+        case _COLEMAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_COLEMAK);
+          }
+          break;
+        case _DVORAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_DVORAK);
+          }
+          break;
+        case _LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+        case _RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+        case M_BL:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+        case 6:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              audio_off();
+            #endif
+          }
+        break;
+        case 7:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              audio_on();
+              PLAY_NOTE_ARRAY(start_up, false, 0);
+            #endif
+          }
+        break;
+        case 8:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              layer_off(_MUSIC);
+              stop_all_notes();
+            #endif
+          }
+        break;
+        case 9:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+              layer_on(_MUSIC);
+            #endif
+          }
+        break;
+        case 10:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              voice_iterate();
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+            #endif
+          }
+        break;
+        case 11:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              voice_deiterate();
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+            #endif
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+  #ifdef AUDIO_ENABLE
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(start_up, false, 0);
+  #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+uint8_t starting_note = 0x0C;
+int offset = 7;
+
+void process_action_user(keyrecord_t *record) {
+
+  if (IS_LAYER_ON(_MUSIC)) {
+    if (record->event.pressed) {
+        play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF);
+    } else {
+        stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)));
+    }
+  }
+
+}
+
+void play_goodbye_tone()
+{
+  PLAY_NOTE_ARRAY(goodbye, false, 0);
+  _delay_ms(150);
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/preonic/keymaps/xyverz/makefile.mk b/keyboards/preonic/keymaps/xyverz/makefile.mk
new file mode 100644
index 0000000000..628167ff66
--- /dev/null
+++ b/keyboards/preonic/keymaps/xyverz/makefile.mk
@@ -0,0 +1 @@
+AUDIO_ENABLE = yes
\ No newline at end of file
-- 
cgit v1.2.3


From de1db144d06b488937633110b0598a1cac68f4fc Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 18:44:09 -0700
Subject: Delete dvorak.png

Not reflective of my layout.
---
 keyboards/ergodox/keymaps/xyverz/dvorak.png | Bin 87314 -> 0 bytes
 1 file changed, 0 insertions(+), 0 deletions(-)
 delete mode 100644 keyboards/ergodox/keymaps/xyverz/dvorak.png

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/dvorak.png b/keyboards/ergodox/keymaps/xyverz/dvorak.png
deleted file mode 100644
index cb83163095..0000000000
Binary files a/keyboards/ergodox/keymaps/xyverz/dvorak.png and /dev/null differ
-- 
cgit v1.2.3


From bf93fa510bcc5cec84bcd9d81cb8fae6beb1ebb4 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 18:46:34 -0700
Subject: Delete readme.md

file cleanup, removing file that doesn't apply to my layout.
---
 keyboards/ergodox/keymaps/xyverz/readme.md | 10 ----------
 1 file changed, 10 deletions(-)
 delete mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
deleted file mode 100644
index 8f6dba45e9..0000000000
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ /dev/null
@@ -1,10 +0,0 @@
-# ErgoDox EZ Default Configuration
-
-## Changelog
-
-* Feb 2, 2016 (V1.1): 
-  * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows).
-
-This is what we ship with out of the factory. :) The image says it all:
-
-![Default](default_highres.png)
-- 
cgit v1.2.3


From c060afe68eb729fd3afcfdb3f16e28730ab868b3 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 18:47:13 -0700
Subject: Delete old_keymap.c

file cleanup
---
 keyboards/ergodox/keymaps/xyverz/old_keymap.c | 311 --------------------------
 1 file changed, 311 deletions(-)
 delete mode 100644 keyboards/ergodox/keymaps/xyverz/old_keymap.c

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/old_keymap.c b/keyboards/ergodox/keymaps/xyverz/old_keymap.c
deleted file mode 100644
index e082372f9b..0000000000
--- a/keyboards/ergodox/keymaps/xyverz/old_keymap.c
+++ /dev/null
@@ -1,311 +0,0 @@
-#include "ergodox.h"
-#include "debug.h"
-#include "action_layer.h"
-
-extern keymap_config_t keymap_config;
-
-#define _DVORAK 0 // default layer
-#define _QWERTY 1 // symbols
-#define _LOWER 2
-#define _RAISE 3
-#define _ADJUST 16
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/*
- * Keymap 0: Dvorak
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   ]    |   1  |   2  |   3  |   4  |   5  |  Esc |           |  ESC |   6  |   7  |   8  |   9  |   0  |   [    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Tab    |   '  |   ,  |   .  |   Y  |   Y  |(Null)|           |(Null)|   F  |   G  |   C  |   R  |   L  |   \    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
- * |--------+------+------+------+------+------| FN1  |           | FN2  |------+------+------+------+------+--------|
- * | LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | LCtr | LAlt |       | Ralt | RCtr |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      | Home |       | PgUp |      |      |
- *                                 | BkSp | Del  |------|       |------| Enter| Space|
- *                                 |      |      | End  |       | PgDn |      |      |
- *                                 `--------------------'       `--------------------'
- *
- *
- *****************************************************************************************************
- * This Dvorak keyboard layout stems from my early Kinesis years, using the Contour PS/2 with a Dvorak
- * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the cor-
- * ner keys. I've decided to continue using this layout with my ErgoDox.
- */
-
- [_DVORAK] = (
-	KC_RBRC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,   KC_ESC,
-	KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,   XXXXXXX,
-	KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,
-	KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,   LOWER,
-	KC_LGUI, KC_GRV,  KC_INS,  KC_LEFT, KC_RGHT,
-				   KC_LCTL, KC_LALT,
-						KC_HOME,
-			    KC_BSPC,  KC_DEL,   KC_END,
-        // right hand
-	KC_ESC,   KC_6,     KC_7,     KC_8,     KC_9,     KC_0,    KC_LBRC,
-	NO,       KC_F,     KC_G,     KC_C,     KC_R,     KC_L,    KC_BSLS,
-		  KC_D,     KC_H,     KC_T,     KC_N,     KC_S,    KC_MINS,
-	RAISE,    KC_B,     KC_M,     KC_W,     KC_V,     KC_Z,    KC_RSFT,
-			    KC_UP,    KC_DOWN,  KC_SLSH,  KC_EQL,  KC_RGUI,
-        KC_RALT,  KC_RCTL,
-        KC_PGUP,
-        KC_PGDN,  KC_ENT,   KC_SPC
-),
-
-/* Keymap 1: QWERTY
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
- * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
- *                                 ,------|------|------|       |------+--------+------.
- *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |      |ace   | End  |       | PgDn |        |      |
- *                                 `--------------------'       `----------------------'
- */
-[_QWERTY] = (
-        KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   KC_NO,
-        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
-        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   LOWER,
-        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
-                                              {ALT_T(KC_APP),  KC_LGUI,
-                                                              KC_HOME,
-                                               KC_SPC,KC_BSPC,KC_END,
-        // right hand
-             KC_RGHT,     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
-             KC_NO,    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
-                          KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
-             RAISE, KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
-                                  KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
-             KC_LALT,        CTL_T(KC_ESC),
-             KC_PGUP,
-             KC_PGDN,KC_TAB, KC_ENT
-),
-
-
-/* Lower 2: Symbol Layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-[_LOWER] = (
-       // left hand
-       KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
-       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
-       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
-       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
-       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-                                       KC_TRNS,KC_TRNS,
-                                               KC_TRNS,
-                               KC_TRNS,KC_TRNS,KC_TRNS,
-       // right hand
-       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
-       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
-                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
-       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
-                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS
-),
-
-/* Raise 3: Media and mouse keys
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |Brwser|
- *                                 |      |      |------|       |------|      |Back  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// MEDIA AND MOUSE
-[_RAISE] = (
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
-                                           KC_TRNS, KC_TRNS,
-                                                    KC_TRNS,
-                                  KC_TRNS, KC_TRNS, KC_TRNS,
-    // right hand
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
-                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_WBAK
-),
-
-/* Adjust 16: Lower + Raise
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |        | Reset|      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |------|           |------|      |Dvorak|Qwerty|      |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |      |      |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// MEDIA AND MOUSE
-[_ADJUST] = (
-       KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                                           KC_TRNS, KC_TRNS,
-                                                    KC_TRNS,
-                                  KC_TRNS, KC_TRNS, KC_TRNS,
-    // right hand
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                 KC_TRNS, QWERTY,  DVORAK,  KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS
-),
-
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
-};
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case _DVORAK:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_DVORAK);
-          }
-          break;
-        case _QWERTY:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_QWERTY);
-          }
-          break;
-        case _LOWER:
-          if (record->event.pressed) {
-            layer_on(_LOWER);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          } else {
-            layer_off(_LOWER);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          }
-          break;
-        case _RAISE:
-          if (record->event.pressed) {
-            layer_on(_RAISE);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          } else {
-            layer_off(_RAISE);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          }
-          break;
-
-      }
-    return MACRO_NONE;
-};
-
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-
-    uint8_t layer = biton32(layer_state);
-
-    ergodox_board_led_off();
-    ergodox_right_led_1_off();
-    ergodox_right_led_2_off();
-    ergodox_right_led_3_off();
-    switch (layer) {
-      // TODO: Make this relevant to the ErgoDox EZ.
-        case 1:
-            ergodox_right_led_1_on();
-            break;
-        case 2:
-            ergodox_right_led_2_on();
-            break;
-        default:
-            // none
-            break;
-    }
-
-};
-- 
cgit v1.2.3


From 14938367626f0cddba4bc35abe62a9bcc02bee10 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 18:48:36 -0700
Subject: Delete README.md

file clean up.
---
 keyboards/preonic/keymaps/xyverz/README.md | 49 ------------------------------
 1 file changed, 49 deletions(-)
 delete mode 100644 keyboards/preonic/keymaps/xyverz/README.md

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/xyverz/README.md b/keyboards/preonic/keymaps/xyverz/README.md
deleted file mode 100644
index 9c23c5b9f3..0000000000
--- a/keyboards/preonic/keymaps/xyverz/README.md
+++ /dev/null
@@ -1,49 +0,0 @@
-# The default Preonic layout - largely based on the Planck's
-
-## QWERTY Layer:
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |  -   |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl |  Alt | Left |Right |Lower |    Space    |Raise |  Up  | Down |  GUI |Enter |
- * `-----------------------------------------------------------------------------------'
- */
-
-## LOWER Layer:
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Mute | Vol- | Vol+ |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
- * `-----------------------------------------------------------------------------------'
- */
-
-## RAISE Layer:
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Prev | Play | Next |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
- * `-----------------------------------------------------------------------------------'
- */
\ No newline at end of file
-- 
cgit v1.2.3


From 4e030313f7f55be7573eaab0b91e45290dc2d0b3 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 18:51:34 -0700
Subject: Delete README.md

file cleanup
---
 keyboards/planck/keymaps/xyverz/README.md | 2 --
 1 file changed, 2 deletions(-)
 delete mode 100644 keyboards/planck/keymaps/xyverz/README.md

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/xyverz/README.md b/keyboards/planck/keymaps/xyverz/README.md
deleted file mode 100644
index b0054fc305..0000000000
--- a/keyboards/planck/keymaps/xyverz/README.md
+++ /dev/null
@@ -1,2 +0,0 @@
-# Zrevyx's Planck Layout
-
-- 
cgit v1.2.3


From c062b6a13d7974144b5ab02896d2213051fd91ad Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 18:52:48 -0700
Subject: Delete keymap.c

file cleanup
---
 keyboards/ergodox/keymaps/xyverz/keymap.c | 184 ------------------------------
 1 file changed, 184 deletions(-)
 delete mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
deleted file mode 100644
index dd39dbacb2..0000000000
--- a/keyboards/ergodox/keymaps/xyverz/keymap.c
+++ /dev/null
@@ -1,184 +0,0 @@
-#include "ergodox.h"
-#include "debug.h"
-#include "action_layer.h"
-
-#define BASE 0 // default layer
-#define SYMB 1 // symbols
-#define MDIA 2 // media keys
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap 0: Basic layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   ]    |   1  |   2  |   3  |   4  |   5  |  ESC |           |  ESC |   6  |   7  |   8  |   9  |   0  |   \    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Del    |   '  |   ,  |   .  |   P  |   Y  |  L1  |           |  L1  |   F  |   G  |   C  |   R  |   L  |   /    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |S / L2|   -    |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
- * | LShift |:/Ctrl|   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |Z/Ctrl| RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
- *                                 ,------|------|------|       |------+--------+------.
- *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |      |ace   | End  |       | PgDn |        |      |
- *                                 `--------------------'       `----------------------'
- */
-// If it accepts an argument (i.e, is a function), it doesn't need KC_.
-// Otherwise, it needs KC_*
-[BASE] = KEYMAP(  // layer 0 : default
-        // left hand
-        KC_RBRC,        KC_1,           KC_2,    KC_3,   KC_4,   KC_5,   KC_ESC,
-        KC_DELT,        KC_QUOT,        KC_COMM, KC_DOT, KC_P,   KC_Y,   TG(1),
-        KC_BSPC,        KC_A,           KC_O,    KC_E,   KC_U,   KC_I,
-        KC_LSFT,        CTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   ALL_T(KC_NO),
-        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
-                                              ALT_T(KC_APP),  KC_LGUI,
-                                                              KC_HOME,
-                                               KC_SPC,KC_BSPC,KC_END,
-        // right hand
-             KC_ESC,      KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_LBRC,
-             TG(1),       KC_F,   KC_G,   KC_C,   KC_R,   KC_L,             KC_BSLS,
-                          KC_D,   KC_H,   KC_T,   KC_N,   LT(MDIA, KC_S),   KC_MINS,
-             MEH_T(KC_NO),KC_B,   KC_M,   KC_W,   KC_V,   CTL_T(KC_Z),      KC_RSFT,
-                                  KC_UP,  KC_DOWN,KC_SLSH,KC_EQL,          KC_FN1,
-             KC_LALT,        CTL_T(KC_ESC),
-             KC_PGUP,
-             KC_PGDN,KC_TAB, KC_ENT
-    ),
-/* Keymap 1: Symbol Layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// SYMBOLS
-[SYMB] = KEYMAP(
-       // left hand
-       KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
-       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
-       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
-       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
-       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-                                       KC_TRNS,KC_TRNS,
-                                               KC_TRNS,
-                               KC_TRNS,KC_TRNS,KC_TRNS,
-       // right hand
-       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
-       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
-                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
-       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
-                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS
-),
-/* Keymap 2: Media and mouse keys
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |Brwser|
- *                                 |      |      |------|       |------|      |Back  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// MEDIA AND MOUSE
-KEYMAP(
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
-                                           KC_TRNS, KC_TRNS,
-                                                    KC_TRNS,
-                                  KC_TRNS, KC_TRNS, KC_TRNS,
-    // right hand
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
-                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_WBAK
-),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-        if (record->event.pressed) {
-          register_code(KC_RSFT);
-        } else {
-          unregister_code(KC_RSFT);
-        }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-
-    uint8_t layer = biton32(layer_state);
-
-    ergodox_board_led_off();
-    ergodox_right_led_1_off();
-    ergodox_right_led_2_off();
-    ergodox_right_led_3_off();
-    switch (layer) {
-      // TODO: Make this relevant to the ErgoDox EZ.
-        case 1:
-            ergodox_right_led_1_on();
-            break;
-        case 2:
-            ergodox_right_led_2_on();
-            break;
-        default:
-            // none
-            break;
-    }
-
-};
-- 
cgit v1.2.3


From 39dd3d674cfb7299ce377f70a678d3613f826e0a Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Mon, 8 Aug 2016 19:35:13 -0700
Subject: Changed behavior of _DVORAK layout's KC_RSFT to SFT_T(KC_ENT) for
 flexibility's sake. Updated the rest of the keymap to reflect the current (as
 of 19:37 on 08 Aug 2018) default layout and default makefile.

---
 keyboards/planck/keymaps/xyverz/README.md   |   2 -
 keyboards/planck/keymaps/xyverz/keymap.c    | 335 +++++++++++-----------------
 keyboards/planck/keymaps/xyverz/makefile.mk |  27 ++-
 3 files changed, 160 insertions(+), 204 deletions(-)
 delete mode 100644 keyboards/planck/keymaps/xyverz/README.md

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/xyverz/README.md b/keyboards/planck/keymaps/xyverz/README.md
deleted file mode 100644
index b0054fc305..0000000000
--- a/keyboards/planck/keymaps/xyverz/README.md
+++ /dev/null
@@ -1,2 +0,0 @@
-# Zrevyx's Planck Layout
-
diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c
index 9ac78ec15d..90529428da 100644
--- a/keyboards/planck/keymaps/xyverz/keymap.c
+++ b/keyboards/planck/keymaps/xyverz/keymap.c
@@ -19,25 +19,19 @@ extern keymap_config_t keymap_config;
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
-#define _MUSIC 5
-#define _PLOVER 6
+#define _PLOVER 5
 #define _ADJUST 16
 
-// Macro name shortcuts
-#define QWERTY M(_QWERTY)
-#define COLEMAK M(_COLEMAK)
-#define DVORAK M(_DVORAK)
-#define LOWER M(_LOWER)
-#define RAISE M(_RAISE)
-#define M_BL 5
-#define AUD_OFF M(6)
-#define AUD_ON M(7)
-#define MUS_OFF M(8)
-#define MUS_ON M(9)
-#define VC_IN M(10)
-#define VC_DE M(11)
-#define PLOVER M(12)
-#define EXT_PLV M(13)
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
 
 // Fillers to make layering more clear
 #define _______ KC_TRNS
@@ -60,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
   {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
-  {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
 
 /* Colemak
@@ -78,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
   {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
-  {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
 
 /* Dvorak
@@ -95,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_DVORAK] = {
   {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH},
   {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS},
-  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_T(KC_ENT)},
   {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
 },
 
@@ -114,7 +108,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______},
   {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
   {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MUTE, KC_VOLD, KC_VOLU, _______, _______},
-  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+  {BACKLIT, _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
 },
 
 /* Raise
@@ -132,17 +126,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______},
   {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
   {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MPRV, KC_MPLY, KC_MNXT, _______, _______},
-  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
-},
-
-/* Music (reserved for process_action_user)
- *
- */
-[_MUSIC] = {
-  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
-  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
-  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
-  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER,   XXXXXXX, XXXXXXX, RAISE,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}
+  {BACKLIT, _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
 },
 
 /* Plover layer (http://opensteno.org)
@@ -151,7 +135,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |TogOut|   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
  * `-----------------------------------------------------------------------------------'
@@ -170,42 +154,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |Voice-|Voice+|Mus on|Musoff|      |      |      |      |      |      |      |
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
 [_ADJUST] = {
   {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
-  {_______, _______, _______, AUD_ON,  AUD_OFF, AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
-  {_______, VC_DE,   VC_IN,   MUS_ON,  MUS_OFF, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 }
 
 
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
 };
 
 #ifdef AUDIO_ENABLE
-float tone_startup[][2] = {
-  {440.0*pow(2.0,(31)/12.0), 12},
-  {440.0*pow(2.0,(28)/12.0), 8},
-  {440.0*pow(2.0,(19)/12.0), 8},
-  {440.0*pow(2.0,(24)/12.0), 8},
-  {440.0*pow(2.0,(28)/12.0), 20}
-};
 
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
 float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
 float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
 float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
 float tone_plover[][2]     = SONG(PLOVER_SOUND);
 float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
 
-float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
-float goodbye[][2] = SONG(GOODBYE_SOUND);
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
 #endif
 
 
@@ -214,166 +188,127 @@ void persistant_default_layer_set(uint16_t default_layer) {
   default_layer_set(default_layer);
 }
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case _QWERTY:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-            #endif
-            persistant_default_layer_set(1UL<<_QWERTY);
-          }
-          break;
-        case _COLEMAK:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-            #endif
-            persistant_default_layer_set(1UL<<_COLEMAK);
-          }
-          break;
-        case _DVORAK:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-            #endif
-            persistant_default_layer_set(1UL<<_DVORAK);
-          }
-          break;
-        case _LOWER:
-          if (record->event.pressed) {
-            layer_on(_LOWER);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          } else {
-            layer_off(_LOWER);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          }
-          break;
-        case _RAISE:
-          if (record->event.pressed) {
-            layer_on(_RAISE);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          } else {
-            layer_off(_RAISE);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          }
-          break;
-        case M_BL:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-            #ifdef BACKLIGHT_ENABLE
-              backlight_step();
-            #endif
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-        case 6:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              audio_off();
-            #endif
-          }
-        break;
-        case 7:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              audio_on();
-              PLAY_NOTE_ARRAY(tone_startup, false, 0);
-            #endif
-          }
-        break;
-        case 8:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              layer_off(_MUSIC);
-              stop_all_notes();
-            #endif
-          }
-        break;
-        case 9:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              PLAY_NOTE_ARRAY(music_scale, false, 0);
-              layer_on(_MUSIC);
-            #endif
-          }
-        break;
-        case 10:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              voice_iterate();
-              PLAY_NOTE_ARRAY(music_scale, false, 0);
-            #endif
-          }
-        break;
-        case 11:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              voice_deiterate();
-              PLAY_NOTE_ARRAY(music_scale, false, 0);
-            #endif
-          }
-        break;
-        case 12:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              PLAY_NOTE_ARRAY(tone_plover, false, 0);
-            #endif
-            layer_off(_RAISE);
-            layer_off(_LOWER);
-            layer_off(_ADJUST);
-            layer_off(_MUSIC);
-            stop_all_notes();
-            layer_on(_PLOVER);
-            if (!eeconfig_is_enabled()) {
-                eeconfig_init();
-            }
-            keymap_config.raw = eeconfig_read_keymap();
-            keymap_config.nkro = 1;
-            eeconfig_update_keymap(keymap_config.raw);
-          }
-        break;
-        case 13:
-          if (record->event.pressed) {
-            #ifdef AUDIO_ENABLE
-              PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
-            #endif
-            layer_off(_PLOVER);
-          }
-        break;
-
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
       }
-    return MACRO_NONE;
-};
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_NOTE_ARRAY(tone_plover, false, 0);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
 
 void matrix_init_user(void) {
-  #ifdef AUDIO_ENABLE
-    _delay_ms(20); // stops the tick
-    PLAY_NOTE_ARRAY(tone_startup, false, 0);
-  #endif
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
 }
 
 #ifdef AUDIO_ENABLE
-void play_goodbye_tone()
+
+void startup_user()
 {
-  PLAY_NOTE_ARRAY(goodbye, false, 0);
-  _delay_ms(150);
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
 }
 
-uint8_t starting_note = 0x0C;
-int offset = 7;
-
-void process_action_user(keyrecord_t *record) {
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
 
-  if (IS_LAYER_ON(_MUSIC)) {
-    if (record->event.pressed) {
-        play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF);
-    } else {
-        stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)));
-    }
-  }
+void music_on_user(void)
+{
+    music_scale_user();
+}
 
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
 }
-#endif
+
+#endif
\ No newline at end of file
diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk
index 99fbfbd0bb..0f4953888d 100644
--- a/keyboards/planck/keymaps/xyverz/makefile.mk
+++ b/keyboards/planck/keymaps/xyverz/makefile.mk
@@ -1,2 +1,25 @@
-AUDIO_ENABLE = yes
-NKRO_ENABLE = yes
\ No newline at end of file
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
-- 
cgit v1.2.3


From ca3278cc356038ecdaf96fe12025b43c18692976 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Tue, 9 Aug 2016 09:31:56 -0700
Subject: adds Xyverz's keymaps (#615)

* Adding my own keymaps to the following keyboards:

Planck, Preonic, Atreus, Ergodox

* Delete dvorak.png

Not reflective of my layout.

* Delete readme.md

file cleanup, removing file that doesn't apply to my layout.

* Delete old_keymap.c

file cleanup

* Delete README.md

file clean up.

* Delete README.md

file cleanup

* Delete keymap.c

file cleanup

* Changed behavior of _DVORAK layout's KC_RSFT to SFT_T(KC_ENT) for flexibility's sake.
Updated the rest of the keymap to reflect the current (as of 19:37 on 08 Aug 2018) default
layout and default makefile.
---
 keyboards/atreus/keymaps/xyverz/keymap.c     |  89 +++++++
 keyboards/planck/keymaps/xyverz/keymap.c     | 314 ++++++++++++++++++++++++
 keyboards/planck/keymaps/xyverz/makefile.mk  |  25 ++
 keyboards/preonic/keymaps/xyverz/keymap.c    | 342 +++++++++++++++++++++++++++
 keyboards/preonic/keymaps/xyverz/makefile.mk |   1 +
 5 files changed, 771 insertions(+)
 create mode 100644 keyboards/atreus/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/planck/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/planck/keymaps/xyverz/makefile.mk
 create mode 100644 keyboards/preonic/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/preonic/keymaps/xyverz/makefile.mk

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..447fbcf10f
--- /dev/null
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -0,0 +1,89 @@
+// This is the personal keymap of Ian Sterling (@xyverz). It is based on the keymap by
+// Chris Gerber (@gerbercj), with the addition of persistent layers like the Planck and
+// Preonic keyboards by Jack Humbert.
+
+#include "atreus.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DV 0
+#define _QW 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DV] = { /* Dvorak */
+    {KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_NO,   KC_F,    KC_G,    KC_C,    KC_R,    KC_L   },
+    {KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_NO,   KC_D,    KC_H,    KC_T,    KC_N,    KC_S   },
+    {SFT_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, CTL_T(KC_DEL),  KC_B,  KC_M,  KC_W,  KC_V,   SFT_T(KC_Z) },
+    {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_EQL}
+  },
+  [_QW] = { /* Qwerty */
+    {KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_NO,   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   },
+    {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_NO,   KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN},
+    {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH)  },
+    {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT}
+  },
+  [_CM] = { /* Colemak */
+    {KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_NO,   KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN},
+    {KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_NO,   KC_H,    KC_N,    KC_E,    KC_I,    KC_O   },
+    {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_K, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH)  },
+    {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT}
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_NO,   KC_6,    KC_7,    KC_8,    KC_9,    KC_0   },
+    {KC_TAB,  KC_INS,  KC_UP,   KC_DEL,  KC_HOME, KC_NO,   KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
+    {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
+    {KC_TRNS, KC_GRV,  KC_LGUI, KC_TRNS, KC_DEL,  KC_LALT, KC_SPC,  KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
+  },
+  [_L2] = { /* LAYER 2 */
+    {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
+    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 },
+    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12 },
+    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, RESET  }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..90529428da
--- /dev/null
+++ b/keyboards/planck/keymaps/xyverz/keymap.c
@@ -0,0 +1,314 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _ADJUST 16
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |  /   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | Left |Right |Lower | Bksp |Space |Raise |  Up  | Down |  GUI |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_T(KC_ENT)},
+  {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Mute | Vol- | Vol+ |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |  Del |  Ins |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MUTE, KC_VOLD, KC_VOLU, _______, _______},
+  {BACKLIT, _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Prev | Play | Next |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |  Del |  Ins |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MPRV, KC_MPLY, KC_MNXT, _______, _______},
+  {BACKLIT, _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |TogOut|   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_NOTE_ARRAY(tone_plover, false, 0);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk
new file mode 100644
index 0000000000..0f4953888d
--- /dev/null
+++ b/keyboards/planck/keymaps/xyverz/makefile.mk
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/preonic/keymaps/xyverz/keymap.c b/keyboards/preonic/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..adc7392e5c
--- /dev/null
+++ b/keyboards/preonic/keymaps/xyverz/keymap.c
@@ -0,0 +1,342 @@
+#include "preonic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _MUSIC 5
+#define _ADJUST 16
+
+// Macro name shortcuts
+#define QWERTY M(_QWERTY)
+#define COLEMAK M(_COLEMAK)
+#define DVORAK M(_DVORAK)
+#define LOWER M(_LOWER)
+#define RAISE M(_RAISE)
+#define M_BL 5
+#define AUD_OFF M(6)
+#define AUD_ON M(7)
+#define MUS_OFF M(8)
+#define MUS_ON M(9)
+#define VC_IN M(10)
+#define VC_DE M(11)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |  -   |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  Alt | Left |Right |Lower |    Space    |Raise |  Up  | Down |  GUI |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL},
+  {KC_MINS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT},
+  {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |  /   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | Left |Right |Lower |    Space    |Raise |  Up  | Down |  GUI |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT},
+  {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Mute | Vol- | Vol+ |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MUTE, KC_VOLD, KC_VOLU, _______, _______},
+  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_INS,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Prev | Play | Next |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      | Home |  End |      |     Ins     |      | PgUp | PgDN |      |Enter |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {KC_CAPS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MPRV, KC_MPLY, KC_MNXT, _______, _______},
+  {M(M_BL), _______, KC_HOME, KC_END,  _______, KC_INS,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
+},
+
+/* Music (reserved for process_action_user)
+ *
+ */
+[_MUSIC] = {
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+  {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER,   XXXXXXX, XXXXXXX, RAISE,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Musoff|Mus on|      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AUD_ON,  AUD_OFF, AG_NORM, AG_SWAP,  QWERTY, COLEMAK, DVORAK,  _______, _______},
+  {_______, VC_DE,   VC_IN,   MUS_ON,  MUS_OFF, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+#ifdef AUDIO_ENABLE
+float start_up[][2] = {
+  {440.0*pow(2.0,(14)/12.0), 20},
+  {440.0*pow(2.0,(26)/12.0), 8},
+  {440.0*pow(2.0,(18)/12.0), 20},
+  {440.0*pow(2.0,(26)/12.0), 8}
+};
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+float goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _QWERTY:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          break;
+        case _COLEMAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_COLEMAK);
+          }
+          break;
+        case _DVORAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_DVORAK);
+          }
+          break;
+        case _LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+        case _RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          break;
+        case M_BL:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+        case 6:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              audio_off();
+            #endif
+          }
+        break;
+        case 7:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              audio_on();
+              PLAY_NOTE_ARRAY(start_up, false, 0);
+            #endif
+          }
+        break;
+        case 8:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              layer_off(_MUSIC);
+              stop_all_notes();
+            #endif
+          }
+        break;
+        case 9:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+              layer_on(_MUSIC);
+            #endif
+          }
+        break;
+        case 10:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              voice_iterate();
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+            #endif
+          }
+        break;
+        case 11:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              voice_deiterate();
+              PLAY_NOTE_ARRAY(music_scale, false, 0);
+            #endif
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+  #ifdef AUDIO_ENABLE
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(start_up, false, 0);
+  #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+uint8_t starting_note = 0x0C;
+int offset = 7;
+
+void process_action_user(keyrecord_t *record) {
+
+  if (IS_LAYER_ON(_MUSIC)) {
+    if (record->event.pressed) {
+        play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF);
+    } else {
+        stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)));
+    }
+  }
+
+}
+
+void play_goodbye_tone()
+{
+  PLAY_NOTE_ARRAY(goodbye, false, 0);
+  _delay_ms(150);
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/preonic/keymaps/xyverz/makefile.mk b/keyboards/preonic/keymaps/xyverz/makefile.mk
new file mode 100644
index 0000000000..628167ff66
--- /dev/null
+++ b/keyboards/preonic/keymaps/xyverz/makefile.mk
@@ -0,0 +1 @@
+AUDIO_ENABLE = yes
\ No newline at end of file
-- 
cgit v1.2.3


From 2a160bbbe3ad496dd688f4399ab2b8d127c0b8a7 Mon Sep 17 00:00:00 2001
From: Callum Oakley <c.oakley108@gmail.com>
Date: Tue, 9 Aug 2016 17:33:07 +0100
Subject: Update keymap. (#616)

* changed order of bottom row of symbol layer to ease acess to brackets

* updated readme.md to reflect keymap changes
---
 keyboards/planck/keymaps/callum/keymap.c  | 4 ++--
 keyboards/planck/keymaps/callum/readme.md | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/callum/keymap.c b/keyboards/planck/keymaps/callum/keymap.c
index a747dcb159..ed187df1da 100644
--- a/keyboards/planck/keymaps/callum/keymap.c
+++ b/keyboards/planck/keymaps/callum/keymap.c
@@ -71,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |-----------------------------------------------------------------------------------.
  * |  Del |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |   ~  |   |  |   +  |   [  |   {  |  }   |   ]  |   =  |   \  |   `  |      |
+ * |      |   ~  |   `  |   +  |   =  |   |  |   \  |   [  |   ]  |   {  |   }  |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
@@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_SYMB] = {
   {KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_ESC },
   {KC_DEL,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL },
-  {_______, KC_TILD, KC_PIPE, KC_PLUS, KC_LBRC, KC_LCBR, KC_RCBR, KC_RBRC, KC_EQL,  KC_BSLS, KC_GRV,  _______},
+  {_______, KC_TILD, KC_GRV,  KC_PLUS, KC_EQL,  KC_PIPE, KC_BSLS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 },
 
diff --git a/keyboards/planck/keymaps/callum/readme.md b/keyboards/planck/keymaps/callum/readme.md
index d4f3449f15..030def7f77 100644
--- a/keyboards/planck/keymaps/callum/readme.md
+++ b/keyboards/planck/keymaps/callum/readme.md
@@ -31,9 +31,9 @@ On *macOS* I recommend using [Karabiner](https://pqrs.org/osx/karabiner/) and ti
 None of the modifiers are overwritten so that `shift-alt-arrows` etc work as expected.
 
 ## The `SYMB` layer
-![](http://i.imgur.com/iuU144Y.png)
+![](http://i.imgur.com/thh1ne2.png)
 
-The symbol layer has all the numbers and their usual corresponding symbols in the first two rows, with the symbols on the home row since I use them more frequently than the numbers. The third row contains all the remaining symbols, with brackets in the centre; then normally shifted symbols to the left, and non shifted to the right, in order of most to least used.
+The symbol layer has all the numbers and their usual corresponding symbols in the first two rows, with the symbols on the home row since I use them more frequently than the numbers. The third row contains all the remaining symbols, arranged roughly so that the most used symbols are accessible with the strongest fingers.
 
 `esc` and `del` are repeated here since I wanted to be able to reach either, one handed, with either hand.
 
-- 
cgit v1.2.3


From 6f700f1eb0c76aa19187efd83ab2b49a0db7f71f Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Tue, 9 Aug 2016 23:49:27 -0700
Subject: Adding my own layouts for the Phantom and Ergodox. My Ergodox layout
 adds persistent layers based on the Planck and Preonic setup. The layout
 arrays are pulled directly from the ergodox/ez/ez.h keymap definition
 starting at line 81.

---
 keyboards/ergodox/keymaps/xyverz/keymap.c | 311 ++++++++++++++++++++++++++++++
 keyboards/phantom/keymaps/xyverz/keymap.c |  67 +++++++
 2 files changed, 378 insertions(+)
 create mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/phantom/keymaps/xyverz/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..c5ce99dd22
--- /dev/null
+++ b/keyboards/ergodox/keymaps/xyverz/keymap.c
@@ -0,0 +1,311 @@
+/*
+ * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak
+ * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner
+ * keys. I've decided to continue using this layout with my ErgoDox.
+ *
+ * The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional
+ * keys as shown in the diagrams. The Colemak layout is merely an adaptation of that.
+ *
+ * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck
+ * layouts.
+ * 
+ * For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the
+ * keymap is defined, beginning on line 81.
+ *
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DV 0 // Dvorak layer
+#define _QW 1 // Qwerty layer
+#define _CM 2 // Colemak layer
+#define _MD 3 // Media Layer
+#define _KP 4 // Keypad Layer
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Dvorak layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ *
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_DV] = {  // layer 0 : Dvorak
+        // left hand
+	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV,  KC_END },
+	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS,  KC_DEL },
+	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_F,    KC_D,    KC_B,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN, KC_SPC },
+	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH, KC_ENT },
+	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL,  KC_PGDN},
+	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO  }
+},
+
+/* Keymap 1: QWERTY layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_QW] = {  // layer 1 : QWERTY
+        // left hand
+	{KC_EQL,  KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
+	{KC_2,    KC_W,    KC_S,    KC_X,    KC_INS,  KC_DEL },
+	{KC_3,    KC_E,    KC_D,    KC_C,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_R,    KC_F,    KC_V,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_T,    KC_G,    KC_B,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_Y,    KC_H,    KC_N,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_U,    KC_J,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_I,    KC_K,    KC_COMM, KC_DOWN, KC_SPC },
+	{KC_9,    KC_O,    KC_L,    KC_DOT,  KC_LBRC, KC_ENT },
+	{KC_0,    KC_P,    KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN},
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+  },
+
+/* Keymap 2: Colemak layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_CM] = {  // layer 2 : Colemak
+        // left hand
+	{KC_EQL,  KC_TAB,  KC_BSPC, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
+	{KC_2,    KC_W,    KC_R,    KC_X,    KC_INS,  KC_DEL },
+	{KC_3,    KC_F,    KC_S,    KC_C,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_P,    KC_T,    KC_V,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_G,    KC_D,    KC_B,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_J,    KC_H,    KC_K,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_L,    KC_N,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_U,    KC_E,    KC_COMM, KC_DOWN, KC_SPC },
+	{KC_9,    KC_Y,    KC_I,    KC_DOT,  KC_LBRC, KC_ENT },
+	{KC_0,    KC_SCLN, KC_O,    KC_SLSH, KC_RBRC, KC_PGDN},
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+  },
+
+/* Keymap 3: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      | PrSc | ScLk | Paus |      | FN4  |           |  FN5 |      | Mute | Vol- | Vol+ |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
+ * |--------+------+------+------+------+------| FN4  |           |  FN5 |------+------+------+------+------+--------|
+ * |        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// Media Layer
+[_MD] = { // layer 3 : Media layer
+        // left hand
+	{RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  },
+	{KC_F1,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F2,   KC_PSCR, KC_TRNS, DVORAK,  KC_TRNS, KC_TRNS},
+	{KC_F3,   KC_SLCK, KC_TRNS, QWERTY,  KC_TRNS, KC_TRNS},
+	{KC_F4,   KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS},
+	{KC_F5,   KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F11,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+
+	// right hand
+	{KC_F12,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F6,   KC_TRNS, KC_MSTP, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F7,   KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F8,   KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F9,   KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F10,  KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  }
+  },
+
+/* Keymap 4: Keypad layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP * | KP - |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Sleep  |      |      |      |      |      | FN5  |           |  FN4 |      | KP 7 | KP 8 | KP 9 | KP + |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
+ * |--------+------+------+------+------+------| FN5  |           |  FN4 |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// Keypad Layer
+[_KP] = { // layer 4 : Keypad layer
+        // left hand
+	{KC_PWR,  KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO  },
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+
+	// right hand
+	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0,   KC_TRNS},
+	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   KC_NO,   KC_TRNS},
+	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT, KC_TRNS},
+	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_NO  }
+  },
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..5948e4ca54
--- /dev/null
+++ b/keyboards/phantom/keymaps/xyverz/keymap.c
@@ -0,0 +1,67 @@
+#include "phantom.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-----------------------------------------------------------------------------.
+   * |Esc  |f1| f2| f3| f4|  | f5| f6| f7| f8|   | f9|f10|f11|f12|	|Prnt|ScLk|Paus|
+   * |-----------------------------------------------------------|	|--------------|
+   * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |  0| - | = |Backsp |	| Ins|Home|PgUp|
+   * |-----------------------------------------------------------|	|--------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|	| Del| End|PgDn|
+   * |-----------------------------------------------------------|	`--------------'
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+   * |-----------------------------------------------------------|		 ,----.
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |		 | Up |
+   * |-----------------------------------------------------------|	 ,-------------.
+   * |Ctrl|Gui |Alt |      Space            |ALT |GUI |_FL |CTRL |	 |Lft| Dn |Rig |
+   * `-----------------------------------------------------------'	 `-------------'
+   */
+[_BL] = KEYMAP(
+  KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+  KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+  KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \
+  KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT,  \
+  KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \
+  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,-----------------------------------------------------------------------------.
+   * |RESET|  |   |   |   |  |   |   |   |   |   |   |   |   |   |	|    |    |    |
+   * |-----------------------------------------------------------|	|--------------|
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |	|    |    |    |
+   * |-----------------------------------------------------------|	|--------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |	|    |    |    |
+   * |-----------------------------------------------------------|	`--------------'
+   * |       |   |   |   |   |   |   |   |   |   |   |   |       |
+   * |-----------------------------------------------------------|		 ,----.
+   * |        | F1| F2| F3| F4| F5|F6 |F7 |F8 |   |   |          |		 |    |
+   * |-----------------------------------------------------------|	 ,-------------.
+   * |    |    |    |                       |    |    |    |     |	 |   |    |    |
+   * `-----------------------------------------------------------'	 `-------------'
+   */
+[_FL] = KEYMAP(
+  KC_TRNS,	  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	KC_TRNS,KC_TRNS,KC_SLEP, \
+  RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU,KC_TRNS,	KC_TRNS,KC_TRNS,KC_TRNS, \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,KC_MSEL,	KC_TRNS,KC_TRNS,KC_TRNS, \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	  KC_TRNS,                      \
+  KC_TRNS,	  KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	  KC_CAPS,		KC_TRNS,      \
+  KC_TRNS,KC_TRNS,KC_TRNS,			  KC_TRNS,			  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	KC_TRNS,KC_TRNS,KC_TRNS)
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+}
-- 
cgit v1.2.3


From 0d6035524173219ced32abbfa2e78171edab17ff Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Tue, 9 Aug 2016 23:56:21 -0700
Subject: Added braces using LSFT(KC_LBRC) and LSFT(KC_RBRC) since the normal
 RBCR and LBCR didn't work for me.

---
 keyboards/atreus/keymaps/xyverz/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
index 447fbcf10f..f4d4a9cf0f 100644
--- a/keyboards/atreus/keymaps/xyverz/keymap.c
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -53,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
     {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 },
     {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12 },
-    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, RESET  }
+    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET  }
   }
 };
 
-- 
cgit v1.2.3


From aa1a90af66df6ab12a371416e23094315c4a43b3 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 11 Aug 2016 00:54:55 +0200
Subject: Added S60-X to keyboards with two layouts.

---
 keyboards/s60-x/Makefile                  |  75 ++++++++++++++
 keyboards/s60-x/config.h                  | 164 ++++++++++++++++++++++++++++++
 keyboards/s60-x/keymaps/default/Makefile  |  21 ++++
 keyboards/s60-x/keymaps/default/keymap.c  |  92 +++++++++++++++++
 keyboards/s60-x/keymaps/default/readme.md |   1 +
 keyboards/s60-x/keymaps/felix/Makefile    |  21 ++++
 keyboards/s60-x/keymaps/felix/keymap.c    | 110 ++++++++++++++++++++
 keyboards/s60-x/keymaps/felix/readme.md   |   1 +
 keyboards/s60-x/readme.md                 |  32 ++++++
 keyboards/s60-x/s60-x.c                   |  28 +++++
 keyboards/s60-x/s60-x.h                   |  44 ++++++++
 11 files changed, 589 insertions(+)
 create mode 100644 keyboards/s60-x/Makefile
 create mode 100644 keyboards/s60-x/config.h
 create mode 100644 keyboards/s60-x/keymaps/default/Makefile
 create mode 100644 keyboards/s60-x/keymaps/default/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/default/readme.md
 create mode 100644 keyboards/s60-x/keymaps/felix/Makefile
 create mode 100644 keyboards/s60-x/keymaps/felix/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/felix/readme.md
 create mode 100644 keyboards/s60-x/readme.md
 create mode 100644 keyboards/s60-x/s60-x.c
 create mode 100644 keyboards/s60-x/s60-x.h

(limited to 'keyboards')

diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
new file mode 100644
index 0000000000..57edd5e036
--- /dev/null
+++ b/keyboards/s60-x/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h
new file mode 100644
index 0000000000..d548a99b33
--- /dev/null
+++ b/keyboards/s60-x/config.h
@@ -0,0 +1,164 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Massdrop
+#define PRODUCT         S60-X
+#define DESCRIPTION     q.m.k. keyboard firmware for S60-X
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/s60-x/keymaps/default/Makefile b/keyboards/s60-x/keymaps/default/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
new file mode 100644
index 0000000000..aa2856525c
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -0,0 +1,92 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layout 0: Default Layer
+	* ,-----------------------------------------------------------.
+	* |`  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+	* |-----------------------------------------------------------|
+	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+	* |-----------------------------------------------------------|
+	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+	* |-----------------------------------------------------------|
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+	* |-----------------------------------------------------------|
+	* |Fn1 |Gui |Alt |        SpaceFn         |Alt |Gui |App |Ctrl|
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,  NO,   BSPC, \
+		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
+		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT, NO,   ENT,  \
+		LSFT, NO,   Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, NO,   RSFT, NO, \
+		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
+
+	/* Layout 1: Function Layer
+	* ,-----------------------------------------------------------.
+	* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+	* |-----------------------------------------------------------|
+	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |-----------------------------------------------------------|
+	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |-----------------------------------------------------------|
+	* |        |Prt|Cut|Cop|Pst|Cal|   |   |   |   |   |CapsLock  |
+	* |-----------------------------------------------------------|
+	* |    |    |    |                        |    |    |    |    |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		ESC,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,  TRNS, DEL,  \
+		TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP,   PGDN, TRNS, SLCK, PAUS, INS,  \
+		TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END,  TRNS, TRNS, PENT, \
+		TRNS, TRNS, PSCR, FN2,  FN3,  FN4,  CALC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, \
+		TRNS, TRNS, TRNS,             TRNS,                         TRNS, TRNS, TRNS, TRNS),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),    /* SpaceFn layout 1 */
+	[1] = ACTION_LAYER_MOMENTARY(1),            /* Momentary layout 1 */
+	[2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL),    /* Cut  */
+	[3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS),    /* Copy  */
+	[4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS),    /* Paste */
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/readme.md b/keyboards/s60-x/keymaps/default/readme.md
new file mode 100644
index 0000000000..73318dad72
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for s60-x
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/Makefile b/keyboards/s60-x/keymaps/felix/Makefile
new file mode 100644
index 0000000000..251e4631d3
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
new file mode 100644
index 0000000000..a5ff1ae4d9
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -0,0 +1,110 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layout 0: Default Layer
+	* ,-----------------------------------------------------------.
+	* |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
+	* |-----------------------------------------------------------|
+	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|BckSp|
+	* |-----------------------------------------------------------|
+	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+	* |-----------------------------------------------------------|
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |Fn1 |
+	* |-----------------------------------------------------------|
+	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL, \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,          \
+		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_FN1, \
+		KC_FN2,  KC_LGUI, KC_LALT,                   KC_FN0,                             KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+
+	/* Layout 1: Gaming Layer, SpaceFn disabled
+	* ,-----------------------------------------------------------.
+	* |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+	* |-----------------------------------------------------------|
+	* |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+	* |-----------------------------------------------------------|
+	* |      |   |   |   |   |   |   |   |   |   |   |   |        |
+	* |-----------------------------------------------------------|
+	* |        |   |   |   |   |   |   |   |   |   |   |     |Fn1 |
+	* |-----------------------------------------------------------|
+	* |   | NOP|     |          Space         |    |    |    |    |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN1,  \
+		KC_TRNS, KC_NO,   KC_TRNS,                   KC_SPC,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	/* Layout 2: Function Layer
+	* ,-----------------------------------------------------------.
+	* |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |RES|
+	* |-----------------------------------------------------------|
+	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |-----------------------------------------------------------|
+	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |-----------------------------------------------------------|
+	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Rsft|
+	* |-----------------------------------------------------------|
+	* |    |    |    |                        |    |Home|PDn |End |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DEBUG,   RESET,   \
+		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
+		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
+		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_RSFT, \
+		KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    /* SpaceFn layout 1 */
+	[1] = ACTION_LAYER_TOGGLE(1),                /* Disable SpaceFn  */
+	[2] = ACTION_LAYER_MOMENTARY(2)             /* SpaceFn layout 1 */
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/readme.md b/keyboards/s60-x/keymaps/felix/readme.md
new file mode 100644
index 0000000000..73318dad72
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/readme.md
@@ -0,0 +1 @@
+# The default keymap for s60-x
\ No newline at end of file
diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
new file mode 100644
index 0000000000..34c48b0b7d
--- /dev/null
+++ b/keyboards/s60-x/readme.md
@@ -0,0 +1,32 @@
+S60-x keyboard firmware
+======================
+DIY compact keyboard by Massdrop. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/jpec/s60x).
+
+## S60X Resources
+- [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit)
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/s60-x folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c
new file mode 100644
index 0000000000..417358140c
--- /dev/null
+++ b/keyboards/s60-x/s60-x.c
@@ -0,0 +1,28 @@
+#include "s60-x.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
new file mode 100644
index 0000000000..714de30db8
--- /dev/null
+++ b/keyboards/s60-x/s60-x.h
@@ -0,0 +1,44 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Vin�cius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef S60X_H
+#define S60X_H
+
+#include "quantum.h"
+
+/* S60-X keymap definition macro
+* K2C, K31 and  K3C are extra keys for ISO
+* K0D is extra key from split backspace, K3E is extra key from split right shift
+*/
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO    }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO    }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO    }  \
+}
+
+#endif
-- 
cgit v1.2.3


From 38766dbc82cd0765cd88a47bb88b57d58b4b6723 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 11 Aug 2016 09:36:37 +0200
Subject: Minor changes to keymaps Clarified extra keys Made ISO-keys non-dead
 in default layout Added non-US backslash on felix layout

---
 keyboards/s60-x/keymaps/default/keymap.c | 6 +++---
 keyboards/s60-x/keymaps/felix/keymap.c   | 8 ++++----
 keyboards/s60-x/s60-x.h                  | 7 +++++--
 3 files changed, 12 insertions(+), 9 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
index aa2856525c..3b680c3072 100644
--- a/keyboards/s60-x/keymaps/default/keymap.c
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -31,10 +31,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* `-----------------------------------------------------------'
 	*/
 	KEYMAP(
-		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,  NO,   BSPC, \
+		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS,  EQL, BSPC, BSPC, \
 		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
-		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT, NO,   ENT,  \
-		LSFT, NO,   Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, NO,   RSFT, NO, \
+		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN,    QUOT, NUHS, ENT,  \
+		LSFT, NUBS, Z,    X,    C,    V,    B,    N,    M, COMM,  DOT,    SLSH,   NO, RSFT, NO, \
 		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
 
 	/* Layout 1: Function Layer
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
index a5ff1ae4d9..3052dd8160 100644
--- a/keyboards/s60-x/keymaps/felix/keymap.c
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
 	* |-----------------------------------------------------------|
-	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |Fn1 |
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  | <> |
 	* |-----------------------------------------------------------|
 	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
 	* `-----------------------------------------------------------'
@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL, \
 		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
 		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,          \
-		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_FN1, \
+		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,  KC_NUBS, \
 		KC_FN2,  KC_LGUI, KC_LALT,                   KC_FN0,                             KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	/* Layout 1: Gaming Layer, SpaceFn disabled
@@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
 	* |-----------------------------------------------------------|
-	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Rsft|
+	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Fn1 |
 	* |-----------------------------------------------------------|
 	* |    |    |    |                        |    |Home|PDn |End |
 	* `-----------------------------------------------------------'
@@ -74,7 +74,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DEBUG,   RESET,   \
 		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
 		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
-		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_RSFT, \
+		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_FN1,  \
 		KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END),
 };
 
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
index 714de30db8..68f2ab22f2 100644
--- a/keyboards/s60-x/s60-x.h
+++ b/keyboards/s60-x/s60-x.h
@@ -23,8 +23,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 /* S60-X keymap definition macro
-* K2C, K31 and  K3C are extra keys for ISO
-* K0D is extra key from split backspace, K3E is extra key from split right shift
+* K31 is the extra key next to short left ISO shift
+* K2C is the moved key next to enter on ISO boards
+* K3C is the extra key next to short right JIS shift
+* K0D is extra key from split backspace
+* K3E is extra key from HHKB-style split right shift
 */
 
 #define KEYMAP( \
-- 
cgit v1.2.3


From 56f86413e0d7606030cad68257a5d6287c9fd35f Mon Sep 17 00:00:00 2001
From: Elliot DeNolf <denolfe@gmail.com>
Date: Thu, 11 Aug 2016 09:54:02 -0600
Subject: Add denolfe satan keymap

---
 keyboards/satan/keymaps/denolfe/Makefile           |  20 +++
 keyboards/satan/keymaps/denolfe/README.md          |  12 ++
 .../satan/keymaps/denolfe/keyboard-layout.png      | Bin 0 -> 31762 bytes
 keyboards/satan/keymaps/denolfe/keymap.c           | 171 +++++++++++++++++++++
 4 files changed, 203 insertions(+)
 create mode 100644 keyboards/satan/keymaps/denolfe/Makefile
 create mode 100644 keyboards/satan/keymaps/denolfe/README.md
 create mode 100644 keyboards/satan/keymaps/denolfe/keyboard-layout.png
 create mode 100644 keyboards/satan/keymaps/denolfe/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/denolfe/Makefile b/keyboards/satan/keymaps/denolfe/Makefile
new file mode 100644
index 0000000000..c4adab737c
--- /dev/null
+++ b/keyboards/satan/keymaps/denolfe/Makefile
@@ -0,0 +1,20 @@
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/satan/keymaps/denolfe/README.md b/keyboards/satan/keymaps/denolfe/README.md
new file mode 100644
index 0000000000..30b94fcdd2
--- /dev/null
+++ b/keyboards/satan/keymaps/denolfe/README.md
@@ -0,0 +1,12 @@
+# denolfe's Layout
+Customized Satan keymap 
+
+![Layout](keyboard-layout.png "Practical Keymap")
+
+## Programming Instructions:
+`cd` into keymap directory, `make dfu`
+
+## Features
+- Movement keys with <kbd>CapsLock</kbd> + <kbd>h</kbd>, <kbd>j</kbd>, <kbd>k</kbd>, <kbd>l</kbd>
+- Media Keys
+- Backlight control
diff --git a/keyboards/satan/keymaps/denolfe/keyboard-layout.png b/keyboards/satan/keymaps/denolfe/keyboard-layout.png
new file mode 100644
index 0000000000..d6d6ad57fb
Binary files /dev/null and b/keyboards/satan/keymaps/denolfe/keyboard-layout.png differ
diff --git a/keyboards/satan/keymaps/denolfe/keymap.c b/keyboards/satan/keymaps/denolfe/keymap.c
new file mode 100644
index 0000000000..2f6c8d8f4f
--- /dev/null
+++ b/keyboards/satan/keymaps/denolfe/keymap.c
@@ -0,0 +1,171 @@
+#include "satan.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _SL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-----------------------------------------------------------.
+   * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+   * |-----------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+   * |-----------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+   * |-----------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+   * |-----------------------------------------------------------|
+   * |Ctrl|Gui |Alt |      Space            |Alt |Gui |FN  |Ctrl |
+   * `-----------------------------------------------------------'
+   */
+[_BL] = KEYMAP(
+  F(0),      KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,     KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_BSPC, \
+  KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,     KC_O,    KC_P,    KC_LBRC,  KC_RBRC,  KC_BSLS, \
+  MO(_FL),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,     KC_L,    KC_SCLN, KC_QUOT,            KC_ENT,  \
+  KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,  KC_DOT,  KC_SLSH,                     KC_RSFT, \
+  KC_LCTL, KC_LGUI,KC_LALT,                          KC_SPC,                            KC_RALT, MO(_FL),  KC_RGUI,  KC_RCTL),
+
+  /* Keymap _FL: Function Layer
+   * ,-----------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |  RESET|
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |BL-|BL+|BL   |
+   * |-----------------------------------------------------------|
+   * |      |   |   |   |   |   |   |       |   |   |   |        |
+   * |-----------------------------------------------------------|
+   * |        | F1|F2 | F3|F4 | F5| F6| F7| F8|   |   |          |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |    |    |    |    |
+   * `-----------------------------------------------------------'
+   */
+[_FL] = KEYMAP(
+  #ifdef RGBLIGHT_ENABLE
+  KC_GRV, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  \
+  KC_TRNS,KC_TRNS,KC_TRNS,  KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,   KC_TRNS,   BL_DEC,   BL_INC,   BL_TOGG, \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,              KC_TRNS, \
+  KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \
+  KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  #else
+  KC_GRV,   KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,          KC_F8,        KC_F9,          KC_F10,   KC_F11,  KC_F12,     KC_DEL,   \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PGDN,        KC_PGUP,      KC_TRNS,        KC_END,   KC_MPRV, KC_MNXT,    KC_MPLY, \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_LEFT,  KC_DOWN,        KC_UP,        KC_RIGHT,       KC_TRNS,           KC_TRNS,    KC_TRNS, \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  BL_DEC,    BL_TOGG,  BL_INC,   KC_HOME,  LCTL(KC_LEFT),  LCTL(KC_END), LCTL(KC_RIGHT), KC_TRNS,                       RESET, \
+  KC_TRNS,  KC_TRNS,  F(9),          KC_TRNS,                                                          KC_TRNS,        KC_TRNS,           KC_TRNS,    KC_TRNS),
+  #endif
+
+[_SL] = KEYMAP(
+  KC_GRV,   KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,     KC_F10,   KC_F11,    KC_F12,  KC_DEL,   \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PGDN,  KC_PGUP,  KC_TRNS,   LSFT(KC_END),   KC_MPRV,     KC_MNXT,    KC_MPLY, \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  LSFT(KC_LEFT),  LSFT(KC_DOWN),  LSFT(KC_UP),    LSFT(KC_RIGHT),  KC_TRNS,  KC_TRNS,  KC_TRNS, \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  BL_DEC,    BL_TOGG,  BL_INC,  LSFT(KC_HOME),  LCTL(LSFT(KC_LEFT)),  LCTL(LSFT(KC_END)), LCTL(LSFT(KC_RIGHT)),   KC_TRNS,                        RESET, \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,             KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+enum function_id {
+    SHIFT_ESC,
+    #ifdef RGBLIGHT_ENABLE
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL
+    #endif
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+  #ifdef RGBLIGHT_ENABLE
+  [1]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+  [2]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
+  [3]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+  [4]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+  [5]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+  [6]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+  [7]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+  [8]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+  #endif
+  [9]  = ACTION_LAYER_MODS(2, MOD_LSFT)
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+    //led operations
+    #ifdef RGBLIGHT_ENABLE
+    case RGBLED_TOGGLE:
+      if (record->event.pressed) {
+        rgblight_toggle();
+      }
+      break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+      }
+      break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+      }
+      break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+      }
+      break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+      }
+      break;
+    case RGBLED_INCREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_increase_val();
+      }
+      break;
+    case RGBLED_DECREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_decrease_val();
+      }
+      break;
+    case RGBLED_STEP_MODE:
+      if (record->event.pressed) {
+        rgblight_step();
+      }
+      break;
+    #endif
+  }
+}
-- 
cgit v1.2.3


From d1f418d85ddb3bc9594ab71267af92ef1a5b7b0c Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 11 Aug 2016 09:46:05 -0700
Subject: Update Makefile

Corrected spelling of "ATREUS" in all locations. (ATRUES -> ATREUS)
---
 keyboards/atreus/Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile
index 95ee1d4d7b..5894d231f9 100644
--- a/keyboards/atreus/Makefile
+++ b/keyboards/atreus/Makefile
@@ -2,11 +2,11 @@
 
 ifdef TEENSY2
     OPT_DEFS += -DATREUS_TEENSY2
-    ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
     OPT_DEFS += -DATREUS_ASTAR
     OPT_DEFS += -DCATERINA_BOOTLOADER
-    ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
 
@@ -84,5 +84,5 @@ endif
 USB ?= /dev/cu.usbmodem1411
 
 upload: build
-	$(ATRUES_UPLOAD_COMMAND)
-	
\ No newline at end of file
+	$(ATREUS_UPLOAD_COMMAND)
+	
-- 
cgit v1.2.3


From eeade4af84af073479f38de32d97e99203b29350 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 11 Aug 2016 09:48:23 -0700
Subject: Update keymap.c

Changed right-hand F-key layout in order to add KC_PLUS to _L2.
---
 keyboards/atreus/keymaps/xyverz/keymap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
index f4d4a9cf0f..0238fdbd39 100644
--- a/keyboards/atreus/keymaps/xyverz/keymap.c
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -51,8 +51,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   },
   [_L2] = { /* LAYER 2 */
     {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
-    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 },
-    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12 },
+    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_PLUS},
+    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12 },
     {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET  }
   }
 };
-- 
cgit v1.2.3


From 71e1bb2e1cf5fd87cb9cc6f81b830763b38665d4 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 11 Aug 2016 11:04:57 -0700
Subject: Delete keymap.c

Not ready to submit this one just yet.
---
 keyboards/phantom/keymaps/xyverz/keymap.c | 67 -------------------------------
 1 file changed, 67 deletions(-)
 delete mode 100644 keyboards/phantom/keymaps/xyverz/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c
deleted file mode 100644
index 5948e4ca54..0000000000
--- a/keyboards/phantom/keymaps/xyverz/keymap.c
+++ /dev/null
@@ -1,67 +0,0 @@
-#include "phantom.h"
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap _BL: (Base Layer) Default Layer
-   * ,-----------------------------------------------------------------------------.
-   * |Esc  |f1| f2| f3| f4|  | f5| f6| f7| f8|   | f9|f10|f11|f12|	|Prnt|ScLk|Paus|
-   * |-----------------------------------------------------------|	|--------------|
-   * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |  0| - | = |Backsp |	| Ins|Home|PgUp|
-   * |-----------------------------------------------------------|	|--------------|
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|	| Del| End|PgDn|
-   * |-----------------------------------------------------------|	`--------------'
-   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
-   * |-----------------------------------------------------------|		 ,----.
-   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |		 | Up |
-   * |-----------------------------------------------------------|	 ,-------------.
-   * |Ctrl|Gui |Alt |      Space            |ALT |GUI |_FL |CTRL |	 |Lft| Dn |Rig |
-   * `-----------------------------------------------------------'	 `-------------'
-   */
-[_BL] = KEYMAP(
-  KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
-  KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
-  KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \
-  KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT,  \
-  KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \
-  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
-
-  /* Keymap _FL: Function Layer
-   * ,-----------------------------------------------------------------------------.
-   * |RESET|  |   |   |   |  |   |   |   |   |   |   |   |   |   |	|    |    |    |
-   * |-----------------------------------------------------------|	|--------------|
-   * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |	|    |    |    |
-   * |-----------------------------------------------------------|	|--------------|
-   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |	|    |    |    |
-   * |-----------------------------------------------------------|	`--------------'
-   * |       |   |   |   |   |   |   |   |   |   |   |   |       |
-   * |-----------------------------------------------------------|		 ,----.
-   * |        | F1| F2| F3| F4| F5|F6 |F7 |F8 |   |   |          |		 |    |
-   * |-----------------------------------------------------------|	 ,-------------.
-   * |    |    |    |                       |    |    |    |     |	 |   |    |    |
-   * `-----------------------------------------------------------'	 `-------------'
-   */
-[_FL] = KEYMAP(
-  KC_TRNS,	  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	KC_TRNS,KC_TRNS,KC_SLEP, \
-  RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU,KC_TRNS,	KC_TRNS,KC_TRNS,KC_TRNS, \
-  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,KC_MSEL,	KC_TRNS,KC_TRNS,KC_TRNS, \
-  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	  KC_TRNS,                      \
-  KC_TRNS,	  KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	  KC_CAPS,		KC_TRNS,      \
-  KC_TRNS,KC_TRNS,KC_TRNS,			  KC_TRNS,			  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,	KC_TRNS,KC_TRNS,KC_TRNS)
-};
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-}
-- 
cgit v1.2.3


From 4725942dc71c2f386d8323865a6255f4dfd2785b Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 11 Aug 2016 21:49:10 +0200
Subject: Small changes Enabled Bootmagic and ISO layouts on felix keymap Added
 unused pins

---
 keyboards/s60-x/config.h               |  2 +-
 keyboards/s60-x/keymaps/felix/keymap.c | 17 +++++++++--------
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h
index d548a99b33..ac7951c247 100644
--- a/keyboards/s60-x/config.h
+++ b/keyboards/s60-x/config.h
@@ -46,7 +46,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
 #define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
-#define UNUSED_PINS
+#define UNUSED_PINS { F0 }
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
index 3052dd8160..7fc0e021c9 100644
--- a/keyboards/s60-x/keymaps/felix/keymap.c
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/* Layout 0: Default Layer
+	* RSFT will be replaced once a better way to control magic is found.
 	* ,-----------------------------------------------------------.
 	* |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
 	* |-----------------------------------------------------------|
@@ -25,17 +26,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
 	* |-----------------------------------------------------------|
-	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  | <> |
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
 	* |-----------------------------------------------------------|
 	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
 	* `-----------------------------------------------------------'
 	*/
 	KEYMAP(
-		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL, \
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
-		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,          \
-		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,  KC_NUBS, \
-		KC_FN2,  KC_LGUI, KC_LALT,                   KC_FN0,                             KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           \
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
+		KC_FN2,  KC_LGUI, KC_LALT,                            KC_FN0,                                      KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	/* Layout 1: Gaming Layer, SpaceFn disabled
 	* ,-----------------------------------------------------------.
@@ -55,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN1,  \
-		KC_TRNS, KC_NO,   KC_TRNS,                   KC_SPC,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+		KC_TRNS, KC_NO,   KC_TRNS,                            KC_SPC,                                      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 
 	/* Layout 2: Function Layer
 	* ,-----------------------------------------------------------.
@@ -75,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
 		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
 		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_FN1,  \
-		KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS, KC_HOME, KC_PGDN, KC_END),
 };
 
 /*
-- 
cgit v1.2.3


From 1c8d64d3b3664ef7d62ea12f8fd510231a7ec54e Mon Sep 17 00:00:00 2001
From: shela <shela.weblog@gmail.com>
Date: Fri, 12 Aug 2016 21:24:43 +0900
Subject: add my keymap

---
 keyboards/hhkb/keymaps/shela/Makefile            |   1 +
 keyboards/hhkb/keymaps/shela/action_pseudo_lut.c | 142 ++++++++++++++++++
 keyboards/hhkb/keymaps/shela/action_pseudo_lut.h |  15 ++
 keyboards/hhkb/keymaps/shela/config.h            |  12 ++
 keyboards/hhkb/keymaps/shela/keymap.c            | 179 +++++++++++++++++++++++
 keyboards/hhkb/keymaps/shela/keymap_jis2us.h     |  32 ++++
 keyboards/hhkb/keymaps/shela/readme.md           |  14 ++
 7 files changed, 395 insertions(+)
 create mode 100644 keyboards/hhkb/keymaps/shela/Makefile
 create mode 100644 keyboards/hhkb/keymaps/shela/action_pseudo_lut.c
 create mode 100644 keyboards/hhkb/keymaps/shela/action_pseudo_lut.h
 create mode 100644 keyboards/hhkb/keymaps/shela/config.h
 create mode 100644 keyboards/hhkb/keymaps/shela/keymap.c
 create mode 100644 keyboards/hhkb/keymaps/shela/keymap_jis2us.h
 create mode 100644 keyboards/hhkb/keymaps/shela/readme.md

(limited to 'keyboards')

diff --git a/keyboards/hhkb/keymaps/shela/Makefile b/keyboards/hhkb/keymaps/shela/Makefile
new file mode 100644
index 0000000000..d0586bda68
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/Makefile
@@ -0,0 +1 @@
+SRC += action_pseudo_lut.c
diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c
new file mode 100644
index 0000000000..b205968c7b
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c
@@ -0,0 +1,142 @@
+#include "quantum.h"
+#include "action_pseudo_lut.h"
+
+static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE];
+
+/*
+ * Pseudo layout action.
+ * This action converts a keycode in order to output the character according to the keymap you specified
+ * still your keyboard layout recognized wrongly on your OS.
+ * Memo: Using other layer keymap to get keycode
+ */
+void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) {
+    static uint8_t prev_shift;
+    uint16_t keycode;
+    uint16_t pseudo_keycode;
+
+    /* get keycode from keymap you specified */
+    keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
+
+    prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+
+    if (record->event.pressed) {
+        /* when magic commands entered, keycode does not converted */
+        if (IS_COMMAND()) {
+            if (prev_shift) {
+                add_shift_bit(keycode);
+            }
+            register_code(keycode);
+            return;
+        }
+
+        if (prev_shift) {
+            pseudo_keycode = convert_keycode(keymap, keycode, true);
+            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+            add_shift_bit(keycode);
+
+            if (IS_LSFT(pseudo_keycode)) {
+                register_code(QK_LSFT ^ pseudo_keycode);
+            } else {
+                /* delete shift mod temporarily */
+                del_mods(prev_shift);
+                send_keyboard_report();
+                register_code(pseudo_keycode);
+                add_mods(prev_shift);
+                send_keyboard_report();
+            }
+        } else {
+            pseudo_keycode = convert_keycode(keymap, keycode, false);
+            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+            if (IS_LSFT(pseudo_keycode)) {
+                add_weak_mods(MOD_BIT(KC_LSFT));
+                send_keyboard_report();
+                register_code(QK_LSFT ^ pseudo_keycode);
+                /* on Windows, prevent key repeat to avoid unintended output */
+                unregister_code(QK_LSFT ^ pseudo_keycode);
+                del_weak_mods(MOD_BIT(KC_LSFT));
+                send_keyboard_report();
+            } else {
+                register_code(pseudo_keycode);
+            }
+        }
+    } else {
+        if (get_shift_bit(keycode)) {
+            del_shift_bit(keycode);
+            pseudo_keycode = convert_keycode(keymap, keycode, true);
+        } else {
+            pseudo_keycode = convert_keycode(keymap, keycode, false);
+        }
+        dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+        if (IS_LSFT(pseudo_keycode)) {
+            unregister_code(QK_LSFT ^ pseudo_keycode);
+        } else {
+            unregister_code(pseudo_keycode);
+        }
+    }
+}
+
+uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded)
+{
+    uint16_t pseudo_keycode;
+
+    switch (keycode) {
+        case KC_A ... KC_CAPSLOCK:
+#if defined(__AVR__)
+            if (shift_modded) {
+                pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
+            } else {
+                pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
+            }
+#else
+            if (shift_modded) {
+                pseudo_keycode = keymap[keycode][1];
+            } else {
+                pseudo_keycode = keymap[keycode][0];
+            }
+#endif
+            /* if undefined, use got keycode as it is */
+            if (pseudo_keycode == 0x00) {
+                if (shift_modded) {
+                    pseudo_keycode = S(keycode);
+                } else {
+                    pseudo_keycode = keycode;
+                }
+            }
+            break;
+        default:
+            if (shift_modded) {
+                pseudo_keycode = S(keycode);
+            } else {
+                pseudo_keycode = keycode;
+            }
+            break;
+    }
+    return pseudo_keycode;
+}
+
+uint8_t get_shift_bit(uint16_t keycode) {
+    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+        return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
+    } else {
+        dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
+        return 0;
+    }
+}
+
+void add_shift_bit(uint16_t keycode) {
+    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+        send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
+    } else {
+        dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
+    }
+}
+
+void del_shift_bit(uint16_t keycode) {
+    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+        send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
+    } else {
+        dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
+    }
+}
diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h
new file mode 100644
index 0000000000..681252440f
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h
@@ -0,0 +1,15 @@
+#ifndef ACTION_PSEUDO_LUT_H
+#define ACTION_PSEUDO_LUT_H
+
+#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key
+
+#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT)
+
+void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]);
+uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool);
+
+uint8_t get_shift_bit(uint16_t);
+void add_shift_bit(uint16_t);
+void del_shift_bit(uint16_t);
+
+#endif
diff --git a/keyboards/hhkb/keymaps/shela/config.h b/keyboards/hhkb/keymaps/shela/config.h
new file mode 100644
index 0000000000..08cc1fb46e
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/config.h
@@ -0,0 +1,12 @@
+#ifndef CONFIG_SHELA_H
+#define CONFIG_SHELA_H
+
+#include "../../config.h"
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 230
+
+#define ONESHOT_TAP_TOGGLE 2
+#define ONESHOT_TIMEOUT 2000
+
+#endif
diff --git a/keyboards/hhkb/keymaps/shela/keymap.c b/keyboards/hhkb/keymaps/shela/keymap.c
new file mode 100644
index 0000000000..c286b99de8
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/keymap.c
@@ -0,0 +1,179 @@
+/*
+ * HHKB Pro 2 US Layout for shela
+ */
+#include "hhkb.h"
+#include "keymap_jis2us.h"
+#include "action_pseudo_lut.h"
+
+enum keymap_layout {
+    BASE = 0,
+    PSEUDO_US,
+    DVORAK,
+    MOUSE,
+    TENKEY,
+    HHKB,
+    SPACE_FN,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  `  | BSp |
+     * |-----------------------------------------------------------------------------------------|
+     * |  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    |
+     * |-----------------------------------------------------------------------------------------|
+     * | Control  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |    Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |LAlt |  LGui  |               SpaceFN             |  RGui  |RAlt |
+     *           `-----------------------------------------------------------------'
+     */
+    [BASE] =
+        KEYMAP(KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_GRV, KC_BSPC, \
+               KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS, \
+               KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT, \
+         OSM(MOD_LSFT),KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_FN0, \
+                               KC_LALT,KC_LGUI,                KC_FN2,                 KC_RGUI,KC_RALT),
+
+    /* Layer 1: Pseudo US Layout Layer */
+    [PSEUDO_US] =
+        KEYMAP(KC_ESC, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_BSPC, \
+               KC_TAB, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, \
+               KC_LCTL,KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_ENT, \
+         OSM(MOD_LSFT),KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_RSFT,KC_FN0, \
+                               KC_LGUI,KC_FN3,                 KC_FN2,                 KC_FN4 ,KC_RGUI),
+
+    /* Layer 2: Dvorak Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  [  |  ]  |  `  | BSp |
+     * |-----------------------------------------------------------------------------------------|
+     * |  Tab   |  '  |  ,  |  .  |  P  |  Y  |  F  |  G  |  C  |  R  |  L  |  /  |  =  |   \    |
+     * |-----------------------------------------------------------------------------------------|
+     * | Control  |  A  |  O  |  E  |  U  |  I  |  D  |  H  |  T  |  N  |  S  |  -  |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |    Shift    |  ;  |  Q  |  J  |  K  |  X  |  B  |  M  |  W  |  V  |  Z  |  Shift  | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |LAlt |  LGui  |              SpaceFN              |  RGui  |RAlt |
+     *           `-----------------------------------------------------------------'
+     */
+    [DVORAK] =
+        KEYMAP(KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_LBRC,KC_RBRC,KC_GRV, KC_BSPC, \
+               KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P,   KC_Y,   KC_F,   KC_G,   KC_C,   KC_R,   KC_L,   KC_SLSH,KC_EQL, KC_BSLS, \
+               KC_LCTL,KC_A,   KC_O,   KC_E,   KC_U,   KC_I,   KC_D,   KC_H,   KC_T,   KC_N,   KC_S,   KC_MINS,KC_ENT, \
+               KC_LSFT,KC_SCLN,KC_Q,   KC_J,   KC_K,   KC_X,   KC_B,   KC_M,   KC_W,   KC_V,   KC_Z,   KC_RSFT,KC_FN0, \
+                               KC_LALT,KC_LGUI,                KC_FN2,                 KC_RGUI,KC_RALT),
+
+    /* Layer 3: Mouse layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |     |     |
+     * |-----------------------------------------------------------------------------------------|
+     * |        |     |     |     |     |     | MwL | MwD | MwU | MwR |     |     |     |        |
+     * |-----------------------------------------------------------------------------------------|
+     * |          |     |     |     |     |     | McL | McD | McU | McR |     |     |            |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     |     |     |     | Mb1 | Mb2 | Mb3 |     |     |         | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |                Mb1                |        |     |
+     *           `-----------------------------------------------------------------'
+     */
+    [MOUSE] =
+        KEYMAP(KC_ESC, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_NO,  KC_TRNS, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,KC_NO,  KC_NO,  KC_NO,  KC_NO, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,KC_NO,  KC_NO,  KC_TRNS, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_BTN1,KC_BTN2,KC_BTN3,KC_NO,  KC_NO,  KC_TRNS,KC_FN0, \
+                               KC_TRNS,KC_TRNS,                KC_BTN1,                KC_TRNS,KC_TRNS),
+
+    /* Layer 4: Tenkey layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |     |     |     |     |     |     |     |     |     |  /  |  *  |  -  |     | BSp |
+     * |-----------------------------------------------------------------------------------------|
+     * |        |     |     |     |     |     |     |     |     |  7  |  8  |  9  |  +  |        |
+     * |-----------------------------------------------------------------------------------------|
+     * |          |     |     |     |     |     |     |     |     |  4  |  5  |  6  |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     |     |     |     |     |     |  1  |  2  |  3  |    +    | Fn0 |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |              SpaceFN              |   0    |  .  |
+     *           `-----------------------------------------------------------------'
+     */
+    [TENKEY] =
+        KEYMAP(KC_ESC, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_PSLS,KC_PAST,KC_PMNS,KC_NO,  KC_BSPC, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_KP_7,KC_KP_8,KC_KP_9,KC_PPLS,KC_NO, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_KP_4,KC_KP_5,KC_KP_6,KC_PENT, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_KP_1,KC_KP_2,KC_KP_3,KC_PPLS,KC_FN0, \
+                               KC_TRNS,KC_TRNS,                KC_FN2,                 KC_KP_0,KC_PDOT),
+
+    /* Layer 5: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------------------------------------.
+     * | Pwr | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+     * |-----------------------------------------------------------------------------------------|
+     * |  Caps  | Fn5 | Fn6 | Fn7 | Fn8 | Fn9 |     |     | Psc | Slk | Pus | Up  |     |  BSp   |
+     * |-----------------------------------------------------------------------------------------|
+     * |          | VoD | VoU | Mut |     |     |  *  |  /  | Hom | PgU | Lef | Rig |   Enter    |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     |     |     |     |  +  |  -  | End | PgD | Dow |         |     |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |                                   |        |     |
+     *           `-----------------------------------------------------------------'
+     */
+    [HHKB] =
+        KEYMAP(KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+               KC_CAPS,KC_FN5, KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_UP,  KC_TRNS,KC_BSPC, \
+               KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \
+               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \
+                               KC_TRNS,KC_TRNS,                KC_TRNS,                KC_TRNS,KC_TRNS),
+
+    /* Layer 6: SpaceFN
+     * ,-----------------------------------------------------------------------------------------.
+     * |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |     | Del |
+     * |-----------------------------------------------------------------------------------------|
+     * |        | End | Up  | Hom |     |     |     | Hom | Up  | End | Psc | Slk | Pau |  Ins   |
+     * |-----------------------------------------------------------------------------------------|
+     * |          | Lef | Dow | Rig | PgU |     | PgU | Lef | Dow | Rig |     |     |            |
+     * |-----------------------------------------------------------------------------------------|
+     * |             |     |     | PgD |     | Spc | PgD |  `  |  ~  |     |     |         |     |
+     * `-----------------------------------------------------------------------------------------'
+     *           |     |        |                                   |        |     |
+     *           `-----------------------------------------------------------------'
+     */
+    [SPACE_FN] =
+        KEYMAP(KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_NO,  KC_DEL, \
+               KC_TRNS,KC_END, KC_UP,  KC_HOME,KC_NO,  KC_NO,  KC_NO,  KC_HOME,KC_UP,  KC_END, KC_PSCR,KC_SLCK,KC_PAUS,KC_INS, \
+               KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_PGUP,KC_NO,  KC_PGUP,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,  KC_NO,  KC_TRNS, \
+               KC_TRNS,KC_NO,  KC_NO,  KC_PGDN,KC_NO,  KC_SPC, KC_PGDN,KC_GRV, KC_TILD,KC_NO,  KC_NO,  KC_TRNS,KC_NO, \
+                               KC_TRNS,KC_TRNS,                KC_TRNS,                KC_TRNS,KC_TRNS),
+};
+
+/*
+ * user defined action function
+ */
+enum function_id {
+    PSEUDO_US_FUNCTION,
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+    switch (id) {
+        case PSEUDO_US_FUNCTION:
+            action_pseudo_lut(record, BASE, keymap_jis2us);
+            break;
+    }
+}
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(HHKB),
+    [1] = ACTION_FUNCTION(PSEUDO_US_FUNCTION),
+    [2] = ACTION_LAYER_TAP_KEY(SPACE_FN, KC_SPACE),
+    [3] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_MHEN),
+    [4] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_KANA),
+    [5] = ACTION_DEFAULT_LAYER_SET(BASE),
+    [6] = ACTION_DEFAULT_LAYER_SET(PSEUDO_US),
+    [7] = ACTION_DEFAULT_LAYER_SET(MOUSE),
+    [8] = ACTION_DEFAULT_LAYER_SET(TENKEY),
+    [9] = ACTION_DEFAULT_LAYER_SET(DVORAK),
+};
diff --git a/keyboards/hhkb/keymaps/shela/keymap_jis2us.h b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h
new file mode 100644
index 0000000000..cf2bd4f0e8
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h
@@ -0,0 +1,32 @@
+#ifndef KEYMAP_JIS2US_H
+#define KEYMAP_JIS2US_H
+
+/* keymap for convert from JIS to US */
+const uint16_t PROGMEM keymap_jis2us[][2] = {
+    [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
+
+    [KC_1]    = { KC_1,    KC_EXLM    }, /* 1 and ! -> 1 and ! */
+    [KC_2]    = { KC_2,    KC_LBRC    }, /* 2 and " -> 2 and @ */
+    [KC_3]    = { KC_3,    KC_HASH    }, /* 3 and # -> 3 and # */
+    [KC_4]    = { KC_4,    KC_DLR     }, /* 4 and $ -> 4 and $ */
+    [KC_5]    = { KC_5,    KC_PERC    }, /* 5 and % -> 5 and % */
+    [KC_6]    = { KC_6,    KC_EQL     }, /* 6 and & -> 6 and ^ */
+    [KC_7]    = { KC_7,    KC_CIRC    }, /* 7 and ' -> 7 and & */
+    [KC_8]    = { KC_8,    KC_DQT     }, /* 8 and ( -> 8 and * */
+    [KC_9]    = { KC_9,    KC_ASTR    }, /* 9 and ) -> 9 and ( */
+    [KC_0]    = { KC_0,    KC_LPRN    }, /* 0 and (no assign) -> 0 and ) */
+    [KC_MINS] = { KC_MINS, S(KC_RO)   }, /* - and = -> - and _ */
+    [KC_EQL]  = { KC_UNDS, KC_COLN    }, /* ^ and ~ -> = and + */
+    [KC_LBRC] = { KC_RBRC, KC_RCBR    }, /* @ and ` -> [ and { */
+    [KC_RBRC] = { KC_BSLS, KC_PIPE    }, /* [ and { -> ] and } */
+    [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
+    [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
+    [KC_SCLN] = { KC_SCLN, KC_QUOT    }, /* ; and + -> ; and : */
+    [KC_QUOT] = { KC_AMPR, KC_AT      }, /* : and * -> ' and " */
+    [KC_GRV]  = { KC_LCBR, KC_PLUS    }, /* (no assign) -> ` and ~ */
+    [KC_COMM] = { KC_COMM, KC_LT      }, /* , and < -> , and < */
+    [KC_DOT]  = { KC_DOT,  KC_GT      }, /* . and > -> . and > */
+    [KC_SLSH] = { KC_SLSH, KC_QUES    }, /* / and ? -> / and ? */
+};
+
+#endif
diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md
new file mode 100644
index 0000000000..cf5f291697
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/readme.md
@@ -0,0 +1,14 @@
+# Shela's HHKB Layout
+
+Layer 0: US Layout
+Layer 1: Pseudo US Layout
+Layer 2: Dvorak Layout
+Layer 3: Mouse
+Layer 4: Tenkey
+Layer 5: HHKB Fn Key
+Layer 6: SpaceFN
+
+## Pseudo US Layout
+
+On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings.
+But, you can use HHKB like a US layout keyboard as it is.
-- 
cgit v1.2.3


From c9272fee083d274c11bab0d8ec5520b54961f7fa Mon Sep 17 00:00:00 2001
From: shela <shela.weblog@gmail.com>
Date: Fri, 12 Aug 2016 21:33:32 +0900
Subject: add new line

---
 keyboards/hhkb/keymaps/shela/readme.md | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md
index cf5f291697..2317e880f2 100644
--- a/keyboards/hhkb/keymaps/shela/readme.md
+++ b/keyboards/hhkb/keymaps/shela/readme.md
@@ -1,12 +1,12 @@
 # Shela's HHKB Layout
 
-Layer 0: US Layout
-Layer 1: Pseudo US Layout
-Layer 2: Dvorak Layout
-Layer 3: Mouse
-Layer 4: Tenkey
-Layer 5: HHKB Fn Key
-Layer 6: SpaceFN
+Layer 0: US Layout  
+Layer 1: Pseudo US Layout  
+Layer 2: Dvorak Layout  
+Layer 3: Mouse  
+Layer 4: Tenkey  
+Layer 5: HHKB Fn Key  
+Layer 6: SpaceFN  
 
 ## Pseudo US Layout
 
-- 
cgit v1.2.3


From 11e23fd3fdbe86ff85b2be7783c46d4360b07360 Mon Sep 17 00:00:00 2001
From: shela <shela.weblog@gmail.com>
Date: Fri, 12 Aug 2016 21:45:36 +0900
Subject: add new line

---
 keyboards/hhkb/keymaps/shela/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md
index 2317e880f2..5a06a83632 100644
--- a/keyboards/hhkb/keymaps/shela/readme.md
+++ b/keyboards/hhkb/keymaps/shela/readme.md
@@ -10,5 +10,5 @@ Layer 6: SpaceFN
 
 ## Pseudo US Layout
 
-On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings.
+On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings.  
 But, you can use HHKB like a US layout keyboard as it is.
-- 
cgit v1.2.3


From b98d47abe544c68ffba745b6643a777f8f61a03c Mon Sep 17 00:00:00 2001
From: Gergely Nagy <algernon@madhouse-project.org>
Date: Fri, 12 Aug 2016 16:36:07 +0200
Subject: ergodox: Update my keymap to v1.5

Major changes include:

* The **1HAND** layer has been removed.
* A `Delete` key is now available on the right thumb cluster.
* The **ADORE** layer received a major update, see the updated layout
  image.
* It is now possible to enable automatic logging for the **ADORE**
  layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when
  compiling the keymap. It is off by default.
* The `~` key and the `Media Next/Prev` key have been swapped on
  the **base** layer.
* On the **ARROW** layer, `Backspace` has been replaced by `Enter`.
* There is some experimental support for entering Unicode symbols.

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
---
 keyboards/ergodox/keymaps/algernon/Makefile        |    7 +
 .../keymaps/algernon/images/adore-layer.png        |  Bin 95615 -> 93748 bytes
 .../ergodox/keymaps/algernon/images/base-layer.png |  Bin 95654 -> 95222 bytes
 .../keymaps/algernon/images/one-handed-layer.png   |  Bin 91140 -> 0 bytes
 keyboards/ergodox/keymaps/algernon/keymap.c        | 2422 ++++++++++----------
 keyboards/ergodox/keymaps/algernon/readme.md       |   52 +-
 6 files changed, 1244 insertions(+), 1237 deletions(-)
 delete mode 100644 keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile
index 6bf3976b9d..00194857ac 100644
--- a/keyboards/ergodox/keymaps/algernon/Makefile
+++ b/keyboards/ergodox/keymaps/algernon/Makefile
@@ -8,10 +8,17 @@ CONSOLE_ENABLE = no
 TAP_DANCE_ENABLE = yes
 KEYLOGGER_ENABLE ?= yes
 
+ADORE_AUTOLOG ?= no
+
 ifeq (${FORCE_NKRO},yes)
 OPT_DEFS += -DFORCE_NKRO
 endif
 
+ifeq (${ADORE_AUTOLOG},yes)
+KEYLOGGER_ENABLE = yes
+OPT_DEFS += -DADORE_AUTOLOG
+endif
+
 ifeq (${KEYLOGGER_ENABLE},yes)
 OPT_DEFS += -DKEYLOGGER_ENABLE
 CONSOLE_ENABLE = yes
diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png
index 3df68ea53d..44ad8a1eb7 100644
Binary files a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png and b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png differ
diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png
index 7b25a05b3a..da159fbe2e 100644
Binary files a/keyboards/ergodox/keymaps/algernon/images/base-layer.png and b/keyboards/ergodox/keymaps/algernon/images/base-layer.png differ
diff --git a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png b/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png
deleted file mode 100644
index 698d11e5f2..0000000000
Binary files a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png and /dev/null differ
diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c
index c4de53da27..244bfb51fe 100644
--- a/keyboards/ergodox/keymaps/algernon/keymap.c
+++ b/keyboards/ergodox/keymaps/algernon/keymap.c
@@ -1,1218 +1,1206 @@
-/*
- * algernon's ErgoDox EZ layout, please see the readme.md file!
- */
-
-#include "ergodox.h"
-#include "led.h"
-#include "debug.h"
-#include "action_layer.h"
-#include "action_util.h"
-#include "mousekey.h"
-#include "timer.h"
-#include "keymap_plover.h"
-#include "eeconfig.h"
-#include "wait.h"
+/*
+ * algernon's ErgoDox EZ layout, please see the readme.md file!
+ */
+
+#include "ergodox.h"
+#include "led.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "action_util.h"
+#include "mousekey.h"
+#include "timer.h"
+#include "keymap_plover.h"
+#include "eeconfig.h"
+#include "wait.h"
 #include "version.h"
-
-/* Layers */
-
-enum {
-  BASE = 0,
-  ADORE,
-  ARRW,
-  APPSEL,
-  HUN,
-  NMDIA,
-  OHLFT,
-  OHRGT,
-  PLVR,
-};
-
-/* Macros */
-
-enum {
-  NONE = 0,
-  // Buttons that do extra stuff
-  A_GUI,
-  A_PLVR,
-  A_ESC,
-  A_MPN,
-
-  // Function / number keys
-  KF_1, // 1, F1
-  KF_2, // 2, F2
-  KF_3, // ...
-  KF_4,
-  KF_5,
-  KF_6,
-  KF_7,
-  KF_8,
-  KF_9,
-  KF_10,
-  KF_11, // =, F11
-
-  // Application select keys
-  APP_SLK, // Slack
-  APP_EMCS, // Emacs
-  APP_TERM, // Terminal
-  APP_CHRM, // Chrome
-  APP_MSIC, // Music
-
-  // Diagonal mouse movement
-  A_MUL,
-  A_MUR,
-  A_MDL,
-  A_MDR,
-
-  // Hungarian layer keys
-  HU_AA, // Á
-  HU_OO, // Ó
-  HU_EE, // É
-  HU_UU, // Ú
-  HU_II, // Í
-  HU_OE, // Ö
-  HU_UE, // Ü
-  HU_OEE, // Ő
-  HU_UEE, // Ű
-
-  // One-handed layout specials
-  OH_BSSPC,
-  OH_ENTSFT,
-  OH_BASE,
-  OH_LEFT,
-  OH_RIGHT,
-};
-
-/* Fn keys */
-
-enum {
-  F_BSE = 0,
-  F_HUN,
-  F_GUI,
-  F_SFT,
-  F_ALT,
-  F_CTRL
-};
-
-/* Custom keycodes */
-
-enum {
-  CT_CLN = 0,
-  CT_MNS,
-  CT_TA,
-};
-
-/* States & timers */
-
-uint16_t gui_timer = 0;
-
-uint16_t kf_timers[12];
-
-uint16_t oh_base_timer = 0;
-uint16_t oh_bsspc_timer = 0;
-uint16_t oh_entsft_timer = 0;
-
-#define OH_BLINK_INTERVAL 500
-
-uint8_t oh_left_blink = 0;
-uint16_t oh_left_blink_timer = 0;
-uint8_t oh_right_blink = 0;
-uint16_t oh_right_blink_timer = 0;
-
-#if KEYLOGGER_ENABLE
-bool log_enable = false;
-#endif
-
-bool time_travel = false;
-
-/* The Keymap */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Keymap 0: Base Layer
- *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * |        `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr |           | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10|       F11 |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * | Next/Prev |   '  |   ,  |   .  |   P  |   Y  |   [  |           |  ]   |   F  |   G  |   C  |   R  |  L   | \         |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * | Tab/ARROW |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |  S   | = / Arrow |
- * |-----------+------+------+------+------+------|   (  |           |  )   |------+------+------+------+------+-----------|
- * | Play/Pause|   /  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |  Z   |      Stop |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *     |       |      |      |      |   :  |                                       |   -  |      |      |      |       |
- *     `-----------------------------------'                                       `-----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         | LAlt | GUI  |           | MDIA | 1HND |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      | Ctrl |           | LEAD |      |      |
- *                                  |Backsp|LShift|------|           |------| Enter| Space|
- *                                  |      |      | ESC  |           | HUN  |      |      |
- *                                  `--------------------'           `--------------------'
- */
-[BASE] = KEYMAP(
-// left hand
- KC_GRV             ,M(KF_1)     ,M(KF_2)     ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
-,M(A_MPN)           ,KC_QUOT     ,KC_COMM     ,KC_DOT ,KC_P   ,KC_Y   ,KC_LBRC
-,TD(CT_TA)          ,KC_A        ,KC_O        ,KC_E   ,KC_U   ,KC_I
-,KC_MPLY            ,KC_SLSH     ,KC_Q        ,KC_J   ,KC_K   ,KC_X   ,KC_LPRN
-,KC_NO              ,KC_NO       ,KC_NO       ,KC_NO  ,TD(CT_CLN)
-
-                                                            ,F(F_ALT),F(F_GUI)
-                                                                     ,F(F_CTRL)
-                                                    ,KC_BSPC,F(F_SFT),M(A_ESC)
-
-                                                                // right hand
-                                                               ,KC_APP    ,M(KF_6),M(KF_7)   ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
-                                                               ,KC_RBRC   ,KC_F   ,KC_G      ,KC_C   ,KC_R    ,KC_L     ,KC_BSLS
-                                                                          ,KC_D   ,KC_H      ,KC_T   ,KC_N    ,KC_S     ,KC_EQL
-                                                               ,KC_RPRN   ,KC_B   ,KC_M      ,KC_W   ,KC_V    ,KC_Z     ,KC_MSTP
-                                                                                  ,TD(CT_MNS),KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
-
-                                                               ,OSL(NMDIA),M(OH_LEFT)
-                                                               ,KC_LEAD
-                                                               ,F(F_HUN)  ,KC_ENT ,KC_SPC
-    ),
-
-/* Keymap 1: Adore layer
- *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * |        `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr |           | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10|       F11 |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * | Next/Prev |   ,  |   .  |   L  |   W  |   M  |   [  |           |  ]   |   F  |   H  |   C  |   P  |  Y   | \         |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * | Tab/Arrow |   A  |   O  |   E  |   I  |   U  |------|           |------|   D  |   R  |   T  |   N  |  S   | = / Arrow |
- * |-----------+------+------+------+------+------|   (  |           |  )   |------+------+------+------+------+-----------|
- * | Play/Pause|   /  |   Z  |   '  |   K  |   X  |      |           |      |   B  |   G  |   V  |   J  |  Q   |      Stop |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *     |       |      |      |      |   :  |                                       |   -  |      |      |      |       |
- *     `-----------------------------------'                                       `-----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         | LAlt | GUI  |           | MDIA | 1HND |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      | Ctrl |           | LEAD |      |      |
- *                                  |Backsp|LShift|------|           |------| Enter| Space|
- *                                  |      |      | ESC  |           | HUN  |      |      |
- *                                  `--------------------'           `--------------------'
- */
-[ADORE] = KEYMAP(
-// left hand
- KC_GRV             ,M(KF_1)     ,M(KF_2)     ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
-,M(A_MPN)           ,KC_COMM     ,KC_DOT      ,KC_L   ,KC_W   ,KC_M   ,KC_LBRC
-,TD(CT_TA)          ,KC_A        ,KC_O        ,KC_E   ,KC_I   ,KC_U
-,KC_MPLY            ,KC_SLSH     ,KC_Z        ,KC_QUOT,KC_K   ,KC_X   ,KC_LPRN
-,KC_NO              ,KC_NO       ,KC_NO       ,KC_NO  ,TD(CT_CLN)
-
-                                                            ,F(F_ALT),F(F_GUI)
-                                                                     ,F(F_CTRL)
-                                                    ,KC_BSPC,F(F_SFT),M(A_ESC)
-
-                                                                // right hand
-                                                               ,KC_APP    ,M(KF_6),M(KF_7)   ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
-                                                               ,KC_RBRC   ,KC_F   ,KC_H      ,KC_C   ,KC_P    ,KC_Y     ,KC_BSLS
-                                                                          ,KC_D   ,KC_R      ,KC_T   ,KC_N    ,KC_S     ,KC_EQL
-                                                               ,KC_RPRN   ,KC_B   ,KC_G      ,KC_V   ,KC_J    ,KC_Q     ,KC_MSTP
-                                                                                  ,TD(CT_MNS),KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
-
-                                                               ,OSL(NMDIA),M(OH_LEFT)
-                                                               ,KC_LEAD
-                                                               ,F(F_HUN)  ,KC_ENT ,KC_SPC
-    ),
-
-/* Keymap 2: Arrow layer
- *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |      |           |      |      | Home |  Up  |  End |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |------|           |------|      | Left | Down | Rght |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *      |      |      |      |      |      |                                       |      |      |      |      |      |
- *      `----------------------------------'                                       `----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         |      |      |           |      |      |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      |      |           |      |      |      |
- *                                  |      |      |------|           |------| PgUp | PgDn |
- *                                  |      |      |      |           |      |      |      |
- *                                  `--------------------'           `--------------------'
- */
-
-[ARRW] = KEYMAP(
-// left hand
- KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS
-
-                                             ,KC_TRNS ,KC_TRNS
-                                                      ,KC_TRNS
-                                    ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
-                                                                // right hand
-                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-                                                               ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP   ,KC_END  ,KC_TRNS ,KC_TRNS
-                                                                        ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS
-                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-                                                                                 ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
-                                                               ,KC_TRNS ,KC_TRNS
-                                                               ,KC_TRNS
-                                                               ,KC_TRNS ,KC_PGUP ,KC_PGDN
-    ),
-
-/* Keymap 3: Application select layer
- *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * |           |Music |Slack |Emacs |Term  |Chrome|      |           |      |      |      |      |      |      |           |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |------|           |------|      |      |      |      |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *      |      |      |      |      |      |                                       |      |      |      |      |      |
- *      `----------------------------------'                                       `----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         |      |      |           |      |      |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      |      |           |      |      |      |
- *                                  |      |      |------|           |------|      |      |
- *                                  |      |      |      |           |      |      |      |
- *                                  `--------------------'           `--------------------'
- */
-
-[APPSEL] = KEYMAP(
-// left hand
- KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
-,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS
-
-                                             ,KC_TRNS ,KC_TRNS
-                                                      ,KC_TRNS
-                                    ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
-                                                                // right hand
-                                                               ,KC_TRNS ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_TRNS
-                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-                                                                        ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-                                                                                 ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
-                                                               ,KC_TRNS ,KC_TRNS
-                                                               ,KC_TRNS
-                                                               ,KC_TRNS ,KC_TRNS  ,KC_TRNS
-    ),
-
-
-/* Keymap 4: Hungarian Layer
- *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * |           |      |  Ő   |      |  Ű   |      |      |           |      |      |      |      |      |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |   Á  |  Ó   |  É   |  Ú   |  Í   |------|           |------|      |      |      |      |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |      |  Ö   |      |  Ü   |      |      |           |      |      |      |      |      |      |           |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *      |      |      |      |      |      |                                       |      |      |      |      |      |
- *      `----------------------------------'                                       `----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         |      |      |           |      |      |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      |      |           |      |      |      |
- *                                  |      |      |------|           |------|      |      |
- *                                  |      |      |      |           | BASE |      |      |
- *                                  `--------------------'           `--------------------'
- */
-
-[HUN] = KEYMAP(
-// left hand
- KC_NO   ,KC_NO   ,KC_NO    ,KC_NO   ,KC_NO    ,KC_NO   ,KC_NO
-,KC_NO   ,KC_NO   ,M(HU_OEE),KC_NO   ,M(HU_UEE),KC_NO   ,KC_NO
-,KC_NO   ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II)
-,KC_NO   ,KC_NO   ,M(HU_OE) ,KC_NO   ,M(HU_UE) ,KC_NO   ,KC_NO
-,KC_NO   ,KC_NO   ,KC_NO    ,KC_NO   ,KC_NO
-
-                                             ,KC_NO   ,KC_NO
-                                                      ,KC_NO
-                                    ,KC_NO   ,KC_TRNS ,KC_TRNS
-
-                                                                // right hand
-                                                               ,KC_TRNS ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
-                                                               ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
-                                                                        ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
-                                                               ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
-                                                                                 ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
-
-                                                               ,KC_NO   ,KC_NO
-                                                               ,KC_NO
-                                                               ,F(F_BSE),KC_TRNS  ,KC_TRNS
-    ),
-
-/* Keymap 5: Navigation & Media layer
- *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * | MS Slow   |      |      |      |      |      |ScrLCK|           |ScrLCK|      |      |      |      |      |           |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * | MS Normal |      | Home |  Up  | PgUp |      |      |           |Scroll|      |MsUpL | MsUp |MsUpR |      |PrintScreen|
- * |-----------+------+------+------+------+------|      |           |  Up  |------+------+------+------+------+-----------|
- * | MS Fast   |      | Left | Down | Right|      |------|           |------|      |MsLeft| MsDn |MsRght|      |           |
- * |-----------+------+------+------+------+------|      |           |Scroll|------+------+------+------+------+-----------|
- * | Play/Pause|      | End  | Down | PgDn |      |      |           | Down |      |MsDnL | MsDn |MsDnR |      |      Stop |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *      |      |      |      |      |      |                                       |      |      |      |      |      |
- *      `----------------------------------'                                       `----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         | Mute | VlUp |           | BASE | MClk |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      | VlDn |           | Prev |Left  |Right |
- *                                  |  SPC | Enter|------|           |------| Click| Click|
- *                                  |      |      | ESC  |           | Next |      |      |
- *                                  `--------------------'           `--------------------'
- */
-[NMDIA] = KEYMAP(
-// left hand
- KC_ACL0    ,KC_NO       ,KC_NO      ,KC_NO   ,KC_NO   ,KC_NO   ,LGUI(KC_L)
-,KC_ACL1    ,KC_NO       ,KC_HOME    ,KC_UP   ,KC_PGUP ,KC_NO   ,KC_NO
-,KC_ACL2    ,KC_NO       ,KC_LEFT    ,KC_DOWN ,KC_RIGHT,KC_NO
-,KC_MPLY    ,KC_NO       ,KC_END     ,KC_DOWN ,KC_PGDN ,KC_NO   ,KC_NO
-,KC_NO      ,KC_NO       ,KC_NO      ,KC_NO   ,KC_NO
-                                                        ,KC_MUTE ,KC_VOLU
-                                                                 ,KC_VOLD
-                                                 ,KC_SPC,KC_ENTER,M(A_ESC)
-
-                                                                     // right hand
-                                                                     ,LGUI(KC_L),KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO    ,KC_NO
-                                                                     ,KC_WH_U   ,KC_NO   ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO    ,KC_PSCR
-                                                                                ,KC_NO   ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO    ,KC_NO
-                                                                     ,KC_WH_D   ,KC_NO   ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO    ,KC_MSTP
-                                                                                         ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO    ,KC_NO
-
-                                                                     ,KC_TRNS   ,KC_MS_BTN3
-                                                                     ,KC_MPRV
-                                                                     ,KC_MNXT   ,KC_BTN1 ,KC_BTN2
-    ),
-
-/* Keymap 6: One-handed, left side
- *
- * ,-----------------------------------------------------.
- * |        `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 |A  BSE|
- * |-----------+------+------+------+------+-------------|
- * |       Tab |   '  |   ,  |   .  |   P  |   Y  |   [  |
- * |-----------+------+------+------+------+------|      |
- * |         - |   A  |   O  |   E  |   U  |   I  |------|
- * |-----------+------+------+------+------+------|   (  |
- * | Play/Pause|   ;  |   Q  |   J  |   K  |   X  |      |
- * `-----------+------+------+------+------+-------------'
- *     |  Home | End  | Down |  Up  | ESC  |
- *     `-----------------------------------'
- *                                         ,-------------.
- *                                         | LAlt | GUI  |
- *                                  ,------|------|------|
- *                                  |BackSp|LShift| Ctrl |
- *                                  |      |      |------|
- *                                  |Space |Enter |OTHER |
- *                                  `--------------------'
- */
-[OHLFT] = KEYMAP(
-// left hand
- KC_GRV     ,M(KF_1)     ,M(KF_2)     ,M(KF_3)   ,M(KF_4)    ,M(KF_5) ,M(OH_BASE)
-,KC_TAB     ,KC_QUOT     ,KC_COMM     ,KC_DOT    ,KC_P       ,KC_Y    ,KC_LBRC
-,KC_MINS    ,KC_A        ,KC_O        ,KC_E      ,KC_U       ,KC_I
-,KC_MPLY    ,KC_SCLN     ,KC_Q        ,KC_J      ,KC_K       ,KC_X    ,KC_LPRN
-,KC_HOME    ,KC_END      ,KC_DOWN     ,KC_UP     ,M(A_ESC)
-
-                                                                ,KC_TRNS     ,KC_TRNS
-                                                                             ,KC_TRNS
-                                                    ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_RIGHT)
-
-                                                                // right hand
-                                                               ,KC_NO   ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                               ,KC_NO   ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                                        ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                               ,KC_NO   ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                                                ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-
-                                                               ,KC_NO   ,KC_NO
-                                                               ,KC_NO
-                                                               ,KC_NO   ,KC_NO  ,KC_NO
-    ),
-
-/* Keymap 7: One-handed, right side
- *
- * ,-----------------------------------------------------.
- * | =     F11 | 0 F10| 9 F9 | 8 F8 | 7 F7 | 6 F6 |A  BSE|
- * |-----------+------+------+------+------+-------------|
- * |         / |   L  |   R  |   C  |   G  |   F  |   ]  |
- * |-----------+------+------+------+------+------|      |
- * |         \ |   S  |   N  |   T  |   H  |   D  |------|
- * |-----------+------+------+------+------+------|   )  |
- * |      Stop |   Z  |   V  |   W  |   M  |   B  |      |
- * `-----------+------+------+------+------+-------------'
- *     |  PgDn | PgUp | Right| Left | ESC  |
- *     `-----------------------------------'
- *                                         ,-------------.
- *                                         | LAlt | GUI  |
- *                                  ,------|------|------|
- *                                  |BackSp|LShift| Ctrl |
- *                                  |      |      |------|
- *                                  |Space |Enter |OTHER |
- *                                  `--------------------'
- */
-[OHRGT] = KEYMAP(
-// left hand
- M(KF_11)   ,M(KF_10)    ,M(KF_9)     ,M(KF_8)   ,M(KF_7)    ,M(KF_6) ,M(OH_BASE)
-,KC_SLSH    ,KC_L        ,KC_R        ,KC_C      ,KC_G       ,KC_F    ,KC_RBRC
-,KC_BSLS    ,KC_S        ,KC_N        ,KC_T      ,KC_H       ,KC_D
-,KC_MSTP    ,KC_Z        ,KC_V        ,KC_W      ,KC_M       ,KC_B    ,KC_RPRN
-,KC_PGDN    ,KC_PGUP     ,KC_RGHT     ,KC_LEFT   ,M(A_ESC)
-
-                                                                ,KC_TRNS     ,KC_TRNS
-                                                                             ,KC_TRNS
-                                                    ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_LEFT)
-
-                                                                // right hand
-                                                               ,KC_NO   ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                               ,KC_NO   ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                                        ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                               ,KC_NO   ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-                                                                                ,KC_NO  ,KC_NO  ,KC_NO       ,KC_NO       ,KC_NO
-
-                                                               ,KC_NO   ,KC_NO
-                                                               ,KC_NO
-                                                               ,KC_NO   ,KC_NO  ,KC_NO
-    ),
-
-/* Keymap 8: Steno for Plover
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |        |      |      |      |      |      | BASE |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   #  |   #  |   #  |   #  |   #  |   #  |           |  #   |  #   |  #   |   #  |   #  |  #   |   #    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |   T  |   P  |   H  |      |------|           |------|      |  F   |   P  |   L  |  T   |   D    |
- * |--------+   S  +------+------+------+   *  |   *  |           |  *   |  *   +------+------+------+------+--------|
- * |        |      |   K  |   W  |   R  |      |      |           |      |      |  R   |   B  |   G  |  S   |   Z    |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |      |      |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |   A  |   O  |------|       |------|  E   |  U   |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-
-[PLVR] = KEYMAP(
-// left hand
-KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,  KC_NO,   M(A_PLVR),
-KC_NO,  PV_NUM, PV_NUM, PV_NUM,  PV_NUM, PV_NUM,  PV_NUM,
-KC_NO,  PV_LS,  PV_LT,  PV_LP,   PV_LH,  PV_STAR,
-KC_NO,  PV_LS,  PV_LK,  PV_LW,   PV_LR,  PV_STAR, PV_STAR,
-KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,
-                                           KC_NO, KC_NO,
-                                           KC_NO,
-                                           PV_A,  PV_O,  KC_NO,
-
-                                                 // right hand
-                                                 KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                                                 PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,
-                                                          PV_STAR, PV_RF,   PV_RP,   PV_RL,   PV_RT,   PV_RD,
-                                                 PV_STAR, PV_STAR, PV_RR,   PV_RB,   PV_RG,   PV_RS,   PV_RZ,
-                                                                   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                                           KC_NO,      KC_NO,
-                                           KC_NO,
-                                           KC_NO,PV_E, PV_U
- ),
-
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-   [F_BSE]  = ACTION_LAYER_CLEAR(ON_PRESS)
-  ,[F_HUN]  = ACTION_LAYER_INVERT(HUN, ON_PRESS)
-  ,[F_GUI]  = ACTION_MACRO_TAP(A_GUI)
-  ,[F_SFT]  = ACTION_MODS_ONESHOT (MOD_LSFT)
-  ,[F_ALT]  = ACTION_MODS_ONESHOT (MOD_LALT)
-  ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
-};
-
-void toggle_steno(int pressed)
-{
-  uint8_t layer = biton32(layer_state);
-
-  if (pressed) {
-    if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR);
-
-    register_code(PV_LP);
-    register_code(PV_LH);
-    register_code(PV_LR);
-    register_code(PV_O);
-    register_code(PV_RL);
-    register_code(PV_RG);
-  } else {
-    unregister_code(PV_LP);
-    unregister_code(PV_LH);
-    unregister_code(PV_LR);
-    unregister_code(PV_O);
-    unregister_code(PV_RL);
-    unregister_code(PV_RG);
-  }
-}
-
-macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char)
-{
-  uint8_t need_shift = 0;
-  uint8_t hold_shift = 0;
-
-  if (!record->event.pressed)
-    return MACRO_NONE;
-
-  layer_off (HUN);
-
-  if (keyboard_report->mods & MOD_BIT (KC_LSFT)) {
-    hold_shift = 1;
-    need_shift = 1;
-    unregister_code (KC_LSFT);
-  }
-  if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) {
-    need_shift = 1;
-    hold_shift = 0;
-    unregister_code (KC_LSFT);
-  }
-
-  clear_oneshot_mods ();
-
-  register_code (KC_RALT);
-  unregister_code (KC_RALT);
-  if (accent == (KC_DQT)) {
-    register_code (KC_RSFT);
-  }
-  register_code (accent);
-  unregister_code (accent);
-  if (need_shift && accent != (KC_DQT)) {
-    register_code (KC_RSFT);
-  } else if (accent == (KC_DQT) && !need_shift) {
-    unregister_code (KC_RSFT);
-  }
-  register_code (hun_char);
-  unregister_code (hun_char);
-  if (need_shift || accent == (KC_DQT))
-    unregister_code (KC_RSFT);
-  if (hold_shift)
-    register_code (KC_LSFT);
-
-  return MACRO_NONE;
-}
-
-void ang_handle_kf (keyrecord_t *record, uint8_t id)
-{
-  uint8_t code = id - KF_1;
-
-  if (record->event.pressed) {
-    kf_timers[code] = timer_read ();
-  } else {
-    uint8_t kc;
-
-    if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) {
-      // Long press
-      kc = KC_F1 + code;
-    } else {
-      if (id == KF_11)
-        kc = KC_EQL;
-      else
-        kc = KC_1 + code;
-    }
-
-    register_code (kc);
-    unregister_code (kc);
-  }
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-      case A_ESC:
-        if (record->event.pressed) {
-          if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) {
-            clear_oneshot_mods ();
-          } else {
-            register_code (KC_ESC);
-          }
-          layer_off (HUN);
-        } else {
-          unregister_code (KC_ESC);
-        }
-        break;
-
-      case A_MPN:
-        if (record->event.pressed) {
-          if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
-              ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
-            int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out());
-
-            if (oneshot)
-              clear_oneshot_mods ();
-            unregister_code (KC_LSFT);
-
-            register_code (KC_MPRV);
-            unregister_code (KC_MPRV);
-
-            if (!oneshot)
-              register_code (KC_LSFT);
-          } else {
-            return MACRO (T(MNXT), END);
-          }
-        }
-        break;
-
-        /* Hungarian layer */
-      case HU_AA:
-        return ang_do_hun (record, KC_QUOT, KC_A);
-      case HU_OO:
-        return ang_do_hun (record, KC_QUOT, KC_O);
-      case HU_EE:
-        return ang_do_hun (record, KC_QUOT, KC_E);
-      case HU_UU:
-        return ang_do_hun (record, KC_QUOT, KC_U);
-      case HU_II:
-        return ang_do_hun (record, KC_QUOT, KC_I);
-      case HU_OE:
-        return ang_do_hun (record, KC_DQT, KC_O);
-      case HU_UE:
-        return ang_do_hun (record, KC_DQT, KC_U);
-      case HU_OEE:
-        return ang_do_hun (record, KC_EQL, KC_O);
-      case HU_UEE:
-        return ang_do_hun (record, KC_EQL, KC_U);
-
-        /* Mouse movement */
-      case A_MUL:
-        if (record->event.pressed) {
-          mousekey_on(KC_MS_UP);
-          mousekey_on(KC_MS_LEFT);
-        } else {
-          mousekey_off(KC_MS_UP);
-          mousekey_off(KC_MS_LEFT);
-        }
-        mousekey_send();
-        break;
-
-      case A_MUR:
-        if (record->event.pressed) {
-          mousekey_on(KC_MS_UP);
-          mousekey_on(KC_MS_RIGHT);
-        } else {
-          mousekey_off(KC_MS_UP);
-          mousekey_off(KC_MS_RIGHT);
-        }
-        mousekey_send();
-        break;
-
-      case A_MDL:
-        if (record->event.pressed) {
-          mousekey_on(KC_MS_DOWN);
-          mousekey_on(KC_MS_LEFT);
-        } else {
-          mousekey_off(KC_MS_DOWN);
-          mousekey_off(KC_MS_LEFT);
-        }
-        mousekey_send();
-        break;
-
-      case A_MDR:
-        if (record->event.pressed) {
-          mousekey_on(KC_MS_DOWN);
-          mousekey_on(KC_MS_RIGHT);
-        } else {
-          mousekey_off(KC_MS_DOWN);
-          mousekey_off(KC_MS_RIGHT);
-        }
-        mousekey_send();
-        break;
-
-        /* Plover base */
-      case A_PLVR:
-        toggle_steno(record->event.pressed);
-        break;
-
-        /* GUI & AppSel */
-      case A_GUI:
-        if (record->event.pressed) {
-          register_code (KC_LGUI);
-          if (record->tap.count && !record->tap.interrupted) {
-            if (record->tap.count >= 2) {
-              register_code (KC_W);
-              layer_on (APPSEL);
-              set_oneshot_layer (APPSEL, ONESHOT_START);
-            }
-          } else {
-            record->tap.count = 0;
-          }
-          gui_timer = 0;
-        } else {
-          if (record->tap.count >= 2)
-            {
-              unregister_code (KC_W);
-              clear_oneshot_layer_state (ONESHOT_PRESSED);
-            }
-          gui_timer = timer_read ();
-        }
-        break;
-
-      case APP_SLK:
-        return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END);
-
-      case APP_EMCS:
-        return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(ENT), END);
-
-      case APP_TERM:
-        return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END);
-
-      case APP_CHRM:
-        return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END);
-
-      case APP_MSIC:
-        return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END);
-
-        /* Function keys */
-      case KF_1 ... KF_11:
-        ang_handle_kf (record, id);
-        break;
-
-        /* 1HAND layout */
-      case OH_BASE:
-        if (record->event.pressed) {
-          oh_base_timer = timer_read ();
-        } else {
-          if (timer_elapsed (oh_base_timer) > TAPPING_TERM) {
-            layer_clear ();
-          } else {
-            return MACRO (T(APP), END);
-          }
-        }
-        break;
-
-      case OH_BSSPC:
-        if (record->event.pressed) {
-          oh_bsspc_timer = timer_read ();
-        } else {
-          if (timer_elapsed (oh_bsspc_timer) > TAPPING_TERM) {
-            return MACRO (T(BSPC), END);
-          } else {
-            return MACRO (T(SPC), END);
-          }
-        }
-        break;
-
-      case OH_ENTSFT:
-        if (record->event.pressed) {
-          oh_entsft_timer = timer_read ();
-        } else {
-          if (timer_elapsed (oh_entsft_timer) > TAPPING_TERM) {
-            if (keyboard_report->mods & MOD_BIT(KC_LSFT))
-              unregister_code (KC_LSFT);
-            else
-              register_code (KC_LSFT);
-          } else {
-            return MACRO (T(ENT), END);
-          }
-        }
-        break;
-
-      case OH_LEFT:
-        if (record->event.pressed) {
-          layer_move (OHLFT);
-          oh_left_blink = 1;
-          oh_left_blink_timer = timer_read ();
-          ergodox_right_led_1_on ();
-        }
-        break;
-
-      case OH_RIGHT:
-        if (record->event.pressed) {
-          layer_move (OHRGT);
-          oh_right_blink = 1;
-          oh_right_blink_timer = timer_read ();
-          ergodox_right_led_3_on ();
-        }
-        break;
-      }
-      return MACRO_NONE;
-};
-
-uint8_t is_adore = 0;
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-  uint8_t dl;
-
-  ergodox_led_all_on();
-  for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
-    ergodox_led_all_set (i);
-    wait_ms (5);
-  }
-  wait_ms(1000);
-  for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
-    ergodox_led_all_set (i);
-    wait_ms (10);
-  }
-  ergodox_led_all_off();
-
-  if (!eeconfig_is_enabled())
-    eeconfig_init();
-  dl = eeconfig_read_default_layer ();
-  if (dl == (1UL << ADORE))
-    is_adore = 1;
-};
-
-LEADER_EXTERNS();
-
-void ang_do_unicode (void) {
-  register_code (KC_RCTL);
-  register_code (KC_RSFT);
-  register_code (KC_U);
-  unregister_code (KC_U);
-  unregister_code (KC_RSFT);
-  unregister_code (KC_RCTL);
-  wait_ms (100);
-}
-
-void ang_tap (uint16_t codes[]) {
-  for (int i = 0; codes[i] != 0; i++) {
-    register_code (codes[i]);
-    unregister_code (codes[i]);
-    wait_ms (50);
-  }
-}
-
-#define TAP_ONCE(code) \
-  register_code (code); \
-  unregister_code (code)
-
-void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count == 1) {
-    register_code (KC_RSFT);
-    register_code (KC_SCLN);
-  } else if (state->count == 2) {
-    register_code (KC_SCLN);
-  }
-}
-
-void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count == 1) {
-    unregister_code (KC_SCLN);
-    unregister_code (KC_RSFT);
-  } else if (state->count == 2) {
-    unregister_code (KC_SCLN);
-  }
-}
-
-void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count == 1) {
-    register_code (KC_MINS);
-  } else if (state->count == 2) {
-    register_code (KC_RSFT);
-    register_code (KC_MINS);
-  }
-}
-
-void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count == 1) {
-    unregister_code (KC_MINS);
-  } else if (state->count == 2) {
-    unregister_code (KC_RSFT);
-    unregister_code (KC_MINS);
-  }
-}
-
-typedef struct {
-  bool layer_toggle;
-  bool sticky;
-  bool finished_once;
-} td_ta_state_t;
-
-void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) {
-  td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
-
-  if (td_ta->finished_once) {
-    return;
-  }
-
-  if (td_ta->sticky) {
-    td_ta->sticky = false;
-    td_ta->layer_toggle = false;
-    layer_off (ARRW);
-    return;
-  }
-
-  td_ta->finished_once = true;
-  if (state->count == 1 && !state->pressed) {
-    register_code (KC_TAB);
-    td_ta->sticky = false;
-    td_ta->layer_toggle = false;
-  } else {
-    td_ta->layer_toggle = true;
-    layer_on (ARRW);
-    td_ta->sticky = (state->count == 2);
-  }
-}
-
-void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) {
-  td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
-
-  if (!td_ta->layer_toggle)
-    unregister_code (KC_TAB);
-  if (!td_ta->sticky)
-    layer_off (ARRW);
-
-  td_ta->finished_once = false;
-}
-
-const qk_tap_dance_action_t tap_dance_actions[] = {
-   [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset)
-  ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset)
-  ,[CT_TA]  = {
-     .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset },
-     .user_data = (void *)&((td_ta_state_t) { false, false, false })
-   }
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-  uint8_t layer = biton32(layer_state);
-
-  if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM)
-    unregister_code (KC_LGUI);
-
-  if (layer != OHLFT)
-    oh_left_blink = 0;
-  if (layer != OHRGT)
-    oh_right_blink = 0;
-
-  if (layer == HUN) {
-    ergodox_right_led_2_on();
-    ergodox_right_led_3_on();
-  } else if (layer == NMDIA) {
-    ergodox_right_led_1_on();
-    ergodox_right_led_2_on();
-  } else if (layer == PLVR) {
-    ergodox_right_led_1_on ();
-    ergodox_right_led_2_on ();
-    ergodox_right_led_3_on ();
-  } else if (layer == ADORE) {
-    ergodox_right_led_1_on ();
-    ergodox_right_led_2_on ();
-    ergodox_right_led_3_on ();
-
-    ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
-  }
-
-  if (layer == OHLFT || layer == OHRGT) {
-    ergodox_right_led_2_on();
-
-    if (oh_left_blink) {
-      if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL) {
-        if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) == 0)
-          ergodox_right_led_1_off ();
-      }
-      if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL * 2) {
-        ergodox_right_led_1_on ();
-        oh_left_blink_timer = timer_read ();
-      }
-    }
-
-    if (oh_right_blink) {
-      if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL) {
-        if ((keyboard_report->mods & MOD_BIT(KC_LCTRL)) == 0)
-          ergodox_right_led_3_off ();
-      }
-      if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL * 2) {
-        ergodox_right_led_3_on ();
-        oh_right_blink_timer = timer_read ();
-      }
-    }
-  }
-
-  if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
-      ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
-    ergodox_right_led_1_set (LED_BRIGHTNESS_HI);
-    ergodox_right_led_1_on ();
-  } else {
-    ergodox_right_led_1_set (LED_BRIGHTNESS_LO);
-    if (layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE)
-      ergodox_right_led_1_off ();
-  }
-
-  if (keyboard_report->mods & MOD_BIT(KC_LALT) ||
-      ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) {
-    ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
-    ergodox_right_led_2_on ();
-  } else {
-    ergodox_right_led_2_set (LED_BRIGHTNESS_LO);
-    if (layer != OHRGT && layer != HUN && layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE)
-      ergodox_right_led_2_off ();
-  }
-
-  if (keyboard_report->mods & MOD_BIT(KC_LCTRL) ||
-      ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) {
-    ergodox_right_led_3_set (LED_BRIGHTNESS_HI);
-    ergodox_right_led_3_on ();
-  } else {
-    ergodox_right_led_3_set (LED_BRIGHTNESS_LO);
-    if (layer != OHRGT && layer != HUN && layer != PLVR && layer != ADORE)
-      ergodox_right_led_3_off ();
-  }
-
-  LEADER_DICTIONARY() {
-    leading = false;
-    leader_end ();
-
-#if KEYLOGGER_ENABLE
-    SEQ_ONE_KEY (KC_D) {
-      ergodox_led_all_on();
-      wait_ms(100);
-      ergodox_led_all_off();
-      log_enable = !log_enable;
-    }
-#endif
-
-    SEQ_ONE_KEY (KC_T) {
-      time_travel = !time_travel;
-    }
-
-    SEQ_ONE_KEY (KC_U) {
-      ang_do_unicode ();
-    }
-
-    SEQ_ONE_KEY (KC_V) {
-      SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")");
-    }
-
-    SEQ_ONE_KEY (KC_L) {
-      /* λ */
-      ang_do_unicode ();
-
-      uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0};
-      ang_tap (codes);
-    }
-
-    SEQ_ONE_KEY (KC_Y) {
-      uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0};
-      ang_tap (codes);
-    }
-
-    SEQ_ONE_KEY (KC_S) {
-      ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
-      TAP_ONCE (KC_BSLS);
-      register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT);
-      ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC);
-      register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT);
-      TAP_ONCE (KC_SLSH);
-      ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
-    }
-
-    SEQ_TWO_KEYS (KC_W, KC_M) {
-      register_code (KC_LALT);
-      register_code (KC_F2);
-      unregister_code (KC_F2);
-      unregister_code (KC_LALT);
-
-      wait_ms (1000);
-
-      uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0};
-      ang_tap (codes);
-      register_code (KC_LGUI);
-      register_code (KC_UP);
-      unregister_code (KC_UP);
-      unregister_code (KC_LGUI);
-    }
-
-    SEQ_ONE_KEY (KC_A) {
-      if (is_adore == 0) {
-        default_layer_and (0);
-        default_layer_or ((1UL << ADORE));
-        eeconfig_update_default_layer ((1UL << ADORE));
-        is_adore = 1;
-
-        ergodox_led_all_off ();
-        ergodox_right_led_3_on ();
-        wait_ms (100);
-        ergodox_right_led_2_on ();
-        wait_ms (100);
-        ergodox_right_led_3_off ();
-        ergodox_right_led_1_on ();
-        wait_ms (100);
-        ergodox_right_led_2_off ();
-        wait_ms (100);
-        ergodox_right_led_1_off ();
-      } else {
-        is_adore = 0;
-        default_layer_and (0);
-        default_layer_or (1UL << BASE);
-        eeconfig_update_default_layer ((1UL << BASE));
-
-        ergodox_led_all_off ();
-        ergodox_right_led_1_on ();
-        wait_ms (100);
-        ergodox_right_led_2_on ();
-        wait_ms (100);
-        ergodox_right_led_1_off ();
-        ergodox_right_led_3_on ();
-        wait_ms (100);
-        ergodox_right_led_2_off ();
-        wait_ms (100);
-        ergodox_right_led_3_off ();
-      }
-    }
-  }
-}
-
-static uint16_t last4[4];
-
-bool process_record_user (uint16_t keycode, keyrecord_t *record) {
-#if KEYLOGGER_ENABLE
-  uint8_t layer = biton32(layer_state);
-
-  if (log_enable && layer == BASE) {
-    xprintf ("KL: col=%d, row=%d\n", record->event.key.col,
-             record->event.key.row);
-  }
-#endif
-
-  if (time_travel && !record->event.pressed) {
-    uint8_t p;
-
-    // shift cache one to the left
-    for (p = 0; p < 3; p++) {
-      last4[p] = last4[p + 1];
-    }
-    last4[3] = keycode;
-
-    if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) {
-      uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0};
-      ang_tap (codes);
-      register_code (KC_RSFT);
-      register_code (KC_EQL);
-      unregister_code (KC_EQL);
-      unregister_code (KC_RSFT);
-
-      uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0};
-      ang_tap (codes2);
-
-      return false;
-    }
-  }
-
-  return true;
-}
+
+/* Layers */
+
+enum {
+  BASE = 0,
+  ADORE,
+  ARRW,
+  APPSEL,
+  HUN,
+  NMDIA,
+  PLVR,
+};
+
+/* Macros */
+
+enum {
+  NONE = 0,
+  // Buttons that do extra stuff
+  A_GUI,
+  A_PLVR,
+  A_ESC,
+  A_MPN,
+
+  // Function / number keys
+  KF_1, // 1, F1
+  KF_2, // 2, F2
+  KF_3, // ...
+  KF_4,
+  KF_5,
+  KF_6,
+  KF_7,
+  KF_8,
+  KF_9,
+  KF_10,
+  KF_11, // =, F11
+
+  // Application select keys
+  APP_SLK, // Slack
+  APP_EMCS, // Emacs
+  APP_TERM, // Terminal
+  APP_CHRM, // Chrome
+  APP_MSIC, // Music
+
+  // Diagonal mouse movement
+  A_MUL,
+  A_MUR,
+  A_MDL,
+  A_MDR,
+
+  // Hungarian layer keys
+  HU_AA, // Á
+  HU_OO, // Ó
+  HU_EE, // É
+  HU_UU, // Ú
+  HU_II, // Í
+  HU_OE, // Ö
+  HU_UE, // Ü
+  HU_OEE, // Ő
+  HU_UEE, // Ű
+};
+
+/* Fn keys */
+
+enum {
+  F_BSE = 0,
+  F_HUN,
+  F_GUI,
+  F_SFT,
+  F_ALT,
+  F_CTRL
+};
+
+/* Custom keycodes */
+
+enum {
+  CT_CLN = 0,
+  CT_MNS,
+  CT_TA,
+  CT_LBP,
+  CT_RBP
+};
+
+/* States & timers */
+
+uint16_t gui_timer = 0;
+
+uint16_t kf_timers[12];
+
+#if KEYLOGGER_ENABLE
+bool log_enable = false;
+#endif
+
+bool time_travel = false;
+
+/* The Keymap */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Keymap 0: Base Layer
+ *
+ * ,-----------------------------------------------------.           ,-----------------------------------------------------.
+ * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr |           | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10|       F11 |
+ * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
+ * |         ~ |   '  |   ,  |   .  |   P  |   Y  |   [  |           |  ]   |   F  |   G  |   C  |   R  |  L   | \         |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * | Tab/ARROW |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |  S   | = / Arrow |
+ * |-----------+------+------+------+------+------|   (  |           |  )   |------+------+------+------+------+-----------|
+ * | Play/Pause|   /  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |  Z   |      Stop |
+ * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
+ *     |       |      |      |      |   :  |                                       |   -  |      |      |      |       |
+ *     `-----------------------------------'                                       `-----------------------------------'
+ *                                         ,-------------.           ,-------------.
+ *                                         | LAlt | GUI  |           | MDIA | Del  |
+ *                                  ,------|------|------|           |------+------+------.
+ *                                  |      |      | Ctrl |           | LEAD |      |      |
+ *                                  |Backsp|LShift|------|           |------| Enter| Space|
+ *                                  |      |      | ESC  |           | HUN  |      |      |
+ *                                  `--------------------'           `--------------------'
+ */
+[BASE] = KEYMAP(
+// left hand
+ M(A_MPN)           ,M(KF_1)     ,M(KF_2)     ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
+,KC_GRV             ,KC_QUOT     ,KC_COMM     ,KC_DOT ,KC_P   ,KC_Y   ,KC_LBRC
+,TD(CT_TA)          ,KC_A        ,KC_O        ,KC_E   ,KC_U   ,KC_I
+,KC_MPLY            ,KC_SLSH     ,KC_Q        ,KC_J   ,KC_K   ,KC_X   ,KC_LPRN
+,KC_NO              ,KC_NO       ,KC_NO       ,KC_NO  ,TD(CT_CLN)
+
+                                                            ,F(F_ALT),F(F_GUI)
+                                                                     ,F(F_CTRL)
+                                                    ,KC_BSPC,F(F_SFT),M(A_ESC)
+
+                                                                // right hand
+                                                               ,KC_APP    ,M(KF_6),M(KF_7)   ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
+                                                               ,KC_RBRC   ,KC_F   ,KC_G      ,KC_C   ,KC_R    ,KC_L     ,KC_BSLS
+                                                                          ,KC_D   ,KC_H      ,KC_T   ,KC_N    ,KC_S     ,KC_EQL
+                                                               ,KC_RPRN   ,KC_B   ,KC_M      ,KC_W   ,KC_V    ,KC_Z     ,KC_MSTP
+                                                                                  ,TD(CT_MNS),KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
+
+                                                               ,OSL(NMDIA),KC_DEL
+                                                               ,KC_LEAD
+                                                               ,F(F_HUN)  ,KC_ENT ,KC_SPC
+    ),
+
+/* Keymap 1: Adore layer
+ *
+ * ,-----------------------------------------------------.           ,-----------------------------------------------------.
+ * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr |           | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10|       F11 |
+ * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
+ * |        `~ |   X  |   W  |   K  |   L  |   M  |   (  |           |  )   |   F  |   H  |   C  |   P  |  Y   | \         |
+ * |-----------+------+------+------+------+------|   [  |           |  ]   |------+------+------+------+------+-----------|
+ * | Tab/Arrow |   A  |   O  |   E  |   I  |   U  |------|           |------|   D  |   R  |   T  |   N  |  S   | =         |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * |           |   Z  |   Q  |   '  |   ,  |   .  |   :  |           |  -   |   B  |   G  |   V  |   J  |  /   |           |
+ * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
+ *     |       |      |      |      |      |                                       |      |      |      |      |       |
+ *     `-----------------------------------'                                       `-----------------------------------'
+ *                                         ,-------------.           ,-------------.
+ *                                         | LAlt | GUI  |           | MDIA | Del  |
+ *                                  ,------|------|------|           |------+------+------.
+ *                                  |      |      | Ctrl |           | HUN  |      |      |
+ *                                  |Backsp|LShift|------|           |------| Enter| Space|
+ *                                  |      |      | ESC  |           | LEAD |      |      |
+ *                                  `--------------------'           `--------------------'
+ */
+[ADORE] = KEYMAP(
+// left hand
+ KC_MPLY            ,M(KF_1)     ,M(KF_2)     ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
+,KC_GRV             ,KC_X        ,KC_W        ,KC_K   ,KC_L   ,KC_M   ,TD(CT_LBP)
+,TD(CT_TA)          ,KC_A        ,KC_O        ,KC_E   ,KC_I   ,KC_U
+,KC_NO              ,KC_Z        ,KC_Q        ,KC_QUOT,KC_COMM,KC_DOT ,TD(CT_CLN)
+,KC_NO              ,KC_NO       ,KC_NO       ,KC_NO  ,KC_NO
+
+                                                            ,F(F_ALT),F(F_GUI)
+                                                                     ,F(F_CTRL)
+                                                    ,KC_BSPC,F(F_SFT),M(A_ESC)
+
+                                                                // right hand
+                                                               ,KC_APP    ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
+                                                               ,TD(CT_RBP),KC_F   ,KC_H   ,KC_C   ,KC_P    ,KC_Y     ,KC_BSLS
+                                                                          ,KC_D   ,KC_R   ,KC_T   ,KC_N    ,KC_S     ,KC_EQL
+                                                               ,TD(CT_MNS),KC_B   ,KC_G   ,KC_V   ,KC_J    ,KC_SLSH  ,KC_NO
+                                                                                  ,KC_NO  ,KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
+
+                                                               ,OSL(NMDIA),KC_DEL
+                                                               ,F(F_HUN)
+                                                               ,KC_LEAD   ,KC_ENT ,KC_SPC
+    ),
+
+/* Keymap 2: Arrow layer
+ *
+ * ,-----------------------------------------------------.           ,-----------------------------------------------------.
+ * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
+ * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
+ * |           |      |      |      |      |      |      |           |      |      | Home |  Up  |  End |      |           |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * |           |      |      |      |      |      |------|           |------|      | Left | Down | Rght |      |           |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
+ * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
+ *      |      |      |      |      |      |                                       |      |      |      |      |      |
+ *      `----------------------------------'                                       `----------------------------------'
+ *                                         ,-------------.           ,-------------.
+ *                                         |      |      |           |      |      |
+ *                                  ,------|------|------|           |------+------+------.
+ *                                  |      |      |      |           |      |      |      |
+ *                                  | Enter|      |------|           |------| PgUp | PgDn |
+ *                                  |      |      |      |           |      |      |      |
+ *                                  `--------------------'           `--------------------'
+ */
+
+[ARRW] = KEYMAP(
+// left hand
+ KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS
+
+                                             ,KC_TRNS ,KC_TRNS
+                                                      ,KC_TRNS
+                                    ,KC_ENT  ,KC_TRNS ,KC_TRNS
+
+                                                                // right hand
+                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                               ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP   ,KC_END  ,KC_TRNS ,KC_TRNS
+                                                                        ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS
+                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                                                 ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+                                                               ,KC_TRNS ,KC_TRNS
+                                                               ,KC_TRNS
+                                                               ,KC_TRNS ,KC_PGUP ,KC_PGDN
+    ),
+
+/* Keymap 3: Application select layer
+ *
+ * ,-----------------------------------------------------.           ,-----------------------------------------------------.
+ * |           |Music |Slack |Emacs |Term  |Chrome|      |           |      |      |      |      |      |      |           |
+ * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
+ * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * |           |      |      |      |      |      |------|           |------|      |      |      |      |      |           |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
+ * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
+ *      |      |      |      |      |      |                                       |      |      |      |      |      |
+ *      `----------------------------------'                                       `----------------------------------'
+ *                                         ,-------------.           ,-------------.
+ *                                         |      |      |           |      |      |
+ *                                  ,------|------|------|           |------+------+------.
+ *                                  |      |      |      |           |      |      |      |
+ *                                  |      |      |------|           |------|      |      |
+ *                                  |      |      |      |           |      |      |      |
+ *                                  `--------------------'           `--------------------'
+ */
+
+[APPSEL] = KEYMAP(
+// left hand
+ KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS    ,KC_TRNS    ,KC_TRNS
+,KC_TRNS ,KC_TRNS    ,KC_TRNS   ,KC_TRNS    ,KC_TRNS
+
+                                             ,KC_TRNS ,KC_TRNS
+                                                      ,KC_TRNS
+                                    ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+                                                                // right hand
+                                                               ,KC_TRNS ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_TRNS
+                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                                        ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                                                 ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+                                                               ,KC_TRNS ,KC_TRNS
+                                                               ,KC_TRNS
+                                                               ,KC_TRNS ,KC_TRNS  ,KC_TRNS
+    ),
+
+
+/* Keymap 4: Hungarian Layer
+ *
+ * ,-----------------------------------------------------.           ,-----------------------------------------------------.
+ * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
+ * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
+ * |           |      |  Ő   |      |  Ű   |      |      |           |      |      |      |      |      |      |           |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * |           |   Á  |  Ó   |  É   |  Ú   |  Í   |------|           |------|      |      |      |      |      |           |
+ * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
+ * |           |      |  Ö   |      |  Ü   |      |      |           |      |      |      |      |      |      |           |
+ * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
+ *      |      |      |      |      |      |                                       |      |      |      |      |      |
+ *      `----------------------------------'                                       `----------------------------------'
+ *                                         ,-------------.           ,-------------.
+ *                                         |      |      |           |      |      |
+ *                                  ,------|------|------|           |------+------+------.
+ *                                  |      |      |      |           |      |      |      |
+ *                                  |      |      |------|           |------|      |      |
+ *                                  |      |      |      |           | BASE |      |      |
+ *                                  `--------------------'           `--------------------'
+ */
+
+[HUN] = KEYMAP(
+// left hand
+ KC_NO   ,KC_NO   ,KC_NO    ,KC_NO   ,KC_NO    ,KC_NO   ,KC_NO
+,KC_NO   ,KC_NO   ,M(HU_OEE),KC_NO   ,M(HU_UEE),KC_NO   ,KC_NO
+,KC_NO   ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II)
+,KC_NO   ,KC_NO   ,M(HU_OE) ,KC_NO   ,M(HU_UE) ,KC_NO   ,KC_NO
+,KC_NO   ,KC_NO   ,KC_NO    ,KC_NO   ,KC_NO
+
+                                             ,KC_NO   ,KC_NO
+                                                      ,KC_NO
+                                    ,KC_NO   ,KC_TRNS ,KC_TRNS
+
+                                                                // right hand
+                                                               ,KC_TRNS ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
+                                                               ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
+                                                                        ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
+                                                               ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
+                                                                                 ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO
+
+                                                               ,KC_NO   ,KC_NO
+                                                               ,KC_NO
+                                                               ,F(F_BSE),KC_TRNS  ,KC_TRNS
+    ),
+
+/* Keymap 5: Navigation & Media layer
+ *
+ * ,-----------------------------------------------------.           ,-----------------------------------------------------.
+ * | MS Slow   |      |      |      |      |      |ScrLCK|           |ScrLCK|      |      |      |      |      |           |
+ * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
+ * | MS Normal |      | Home |  Up  | PgUp |      |      |           |Scroll|      |MsUpL | MsUp |MsUpR |      |PrintScreen|
+ * |-----------+------+------+------+------+------|      |           |  Up  |------+------+------+------+------+-----------|
+ * | MS Fast   |      | Left | Down | Right|      |------|           |------|      |MsLeft| MsDn |MsRght|      |           |
+ * |-----------+------+------+------+------+------|      |           |Scroll|------+------+------+------+------+-----------|
+ * | Play/Pause|      | End  | Down | PgDn |      |      |           | Down |      |MsDnL | MsDn |MsDnR |      |      Stop |
+ * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
+ *      |      |      |      |      |      |                                       |      |      |      |      |      |
+ *      `----------------------------------'                                       `----------------------------------'
+ *                                         ,-------------.           ,-------------.
+ *                                         | Mute | VlUp |           | BASE | MClk |
+ *                                  ,------|------|------|           |------+------+------.
+ *                                  |      |      | VlDn |           | Prev |Left  |Right |
+ *                                  |  SPC | Enter|------|           |------| Click| Click|
+ *                                  |      |      | ESC  |           | Next |      |      |
+ *                                  `--------------------'           `--------------------'
+ */
+[NMDIA] = KEYMAP(
+// left hand
+ KC_ACL0    ,KC_NO       ,KC_NO      ,KC_NO   ,KC_NO   ,KC_NO   ,LGUI(KC_L)
+,KC_ACL1    ,KC_NO       ,KC_HOME    ,KC_UP   ,KC_PGUP ,KC_NO   ,KC_NO
+,KC_ACL2    ,KC_NO       ,KC_LEFT    ,KC_DOWN ,KC_RIGHT,KC_NO
+,KC_MPLY    ,KC_NO       ,KC_END     ,KC_DOWN ,KC_PGDN ,KC_NO   ,KC_NO
+,KC_NO      ,KC_NO       ,KC_NO      ,KC_NO   ,KC_NO
+                                                        ,KC_MUTE ,KC_VOLU
+                                                                 ,KC_VOLD
+                                                 ,KC_SPC,KC_ENTER,M(A_ESC)
+
+                                                                     // right hand
+                                                                     ,LGUI(KC_L),KC_NO   ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO    ,KC_NO
+                                                                     ,KC_WH_U   ,KC_NO   ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO    ,KC_PSCR
+                                                                                ,KC_NO   ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO    ,KC_NO
+                                                                     ,KC_WH_D   ,KC_NO   ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO    ,KC_MSTP
+                                                                                         ,KC_NO   ,KC_NO   ,KC_NO   ,KC_NO    ,KC_NO
+
+                                                                     ,KC_TRNS   ,KC_MS_BTN3
+                                                                     ,KC_MPRV
+                                                                     ,KC_MNXT   ,KC_BTN1 ,KC_BTN2
+    ),
+
+/* Keymap 6: Steno for Plover
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      | BASE |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   #  |   #  |   #  |   #  |   #  |   #  |           |  #   |  #   |  #   |   #  |   #  |  #   |   #    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |   T  |   P  |   H  |      |------|           |------|      |  F   |   P  |   L  |  T   |   D    |
+ * |--------+   S  +------+------+------+   *  |   *  |           |  *   |  *   +------+------+------+------+--------|
+ * |        |      |   K  |   W  |   R  |      |      |           |      |      |  R   |   B  |   G  |  S   |   Z    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   A  |   O  |------|       |------|  E   |  U   |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+
+[PLVR] = KEYMAP(
+// left hand
+KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,  KC_NO,   M(A_PLVR),
+KC_NO,  PV_NUM, PV_NUM, PV_NUM,  PV_NUM, PV_NUM,  PV_NUM,
+KC_NO,  PV_LS,  PV_LT,  PV_LP,   PV_LH,  PV_STAR,
+KC_NO,  PV_LS,  PV_LK,  PV_LW,   PV_LR,  PV_STAR, PV_STAR,
+KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,
+                                           KC_NO, KC_NO,
+                                           KC_NO,
+                                           PV_A,  PV_O,  KC_NO,
+
+                                                 // right hand
+                                                 KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+                                                 PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,  PV_NUM,
+                                                          PV_STAR, PV_RF,   PV_RP,   PV_RL,   PV_RT,   PV_RD,
+                                                 PV_STAR, PV_STAR, PV_RR,   PV_RB,   PV_RG,   PV_RS,   PV_RZ,
+                                                                   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+                                           KC_NO,      KC_NO,
+                                           KC_NO,
+                                           KC_NO,PV_E, PV_U
+ ),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+   [F_BSE]  = ACTION_LAYER_CLEAR(ON_PRESS)
+  ,[F_HUN]  = ACTION_LAYER_INVERT(HUN, ON_PRESS)
+  ,[F_GUI]  = ACTION_MACRO_TAP(A_GUI)
+  ,[F_SFT]  = ACTION_MODS_ONESHOT (MOD_LSFT)
+  ,[F_ALT]  = ACTION_MODS_ONESHOT (MOD_LALT)
+  ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
+};
+
+void toggle_steno(int pressed)
+{
+  uint8_t layer = biton32(layer_state);
+
+  if (pressed) {
+    if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR);
+
+    register_code(PV_LP);
+    register_code(PV_LH);
+    register_code(PV_LR);
+    register_code(PV_O);
+    register_code(PV_RL);
+    register_code(PV_RG);
+  } else {
+    unregister_code(PV_LP);
+    unregister_code(PV_LH);
+    unregister_code(PV_LR);
+    unregister_code(PV_O);
+    unregister_code(PV_RL);
+    unregister_code(PV_RG);
+  }
+}
+
+macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char)
+{
+  uint8_t need_shift = 0;
+  uint8_t hold_shift = 0;
+
+  if (!record->event.pressed)
+    return MACRO_NONE;
+
+  layer_off (HUN);
+
+  if (keyboard_report->mods & MOD_BIT (KC_LSFT)) {
+    hold_shift = 1;
+    need_shift = 1;
+    unregister_code (KC_LSFT);
+  }
+  if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) {
+    need_shift = 1;
+    hold_shift = 0;
+    unregister_code (KC_LSFT);
+  }
+
+  clear_oneshot_mods ();
+
+  register_code (KC_RALT);
+  unregister_code (KC_RALT);
+  if (accent == (KC_DQT)) {
+    register_code (KC_RSFT);
+  }
+  register_code (accent);
+  unregister_code (accent);
+  if (need_shift && accent != (KC_DQT)) {
+    register_code (KC_RSFT);
+  } else if (accent == (KC_DQT) && !need_shift) {
+    unregister_code (KC_RSFT);
+  }
+  register_code (hun_char);
+  unregister_code (hun_char);
+  if (need_shift || accent == (KC_DQT))
+    unregister_code (KC_RSFT);
+  if (hold_shift)
+    register_code (KC_LSFT);
+
+  return MACRO_NONE;
+}
+
+void ang_handle_kf (keyrecord_t *record, uint8_t id)
+{
+  uint8_t code = id - KF_1;
+
+  if (record->event.pressed) {
+    kf_timers[code] = timer_read ();
+  } else {
+    uint8_t kc;
+
+    if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) {
+      // Long press
+      kc = KC_F1 + code;
+    } else {
+      if (id == KF_11)
+        kc = KC_EQL;
+      else
+        kc = KC_1 + code;
+    }
+
+    register_code (kc);
+    unregister_code (kc);
+  }
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+      case A_ESC:
+        if (record->event.pressed) {
+          if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) {
+            clear_oneshot_mods ();
+          } else {
+            register_code (KC_ESC);
+          }
+          layer_off (HUN);
+        } else {
+          unregister_code (KC_ESC);
+        }
+        break;
+
+      case A_MPN:
+        if (record->event.pressed) {
+          if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
+              ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
+            int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out());
+
+            if (oneshot)
+              clear_oneshot_mods ();
+            unregister_code (KC_LSFT);
+
+            register_code (KC_MPRV);
+            unregister_code (KC_MPRV);
+
+            if (!oneshot)
+              register_code (KC_LSFT);
+          } else {
+            return MACRO (T(MNXT), END);
+          }
+        }
+        break;
+
+        /* Hungarian layer */
+      case HU_AA:
+        return ang_do_hun (record, KC_QUOT, KC_A);
+      case HU_OO:
+        return ang_do_hun (record, KC_QUOT, KC_O);
+      case HU_EE:
+        return ang_do_hun (record, KC_QUOT, KC_E);
+      case HU_UU:
+        return ang_do_hun (record, KC_QUOT, KC_U);
+      case HU_II:
+        return ang_do_hun (record, KC_QUOT, KC_I);
+      case HU_OE:
+        return ang_do_hun (record, KC_DQT, KC_O);
+      case HU_UE:
+        return ang_do_hun (record, KC_DQT, KC_U);
+      case HU_OEE:
+        return ang_do_hun (record, KC_EQL, KC_O);
+      case HU_UEE:
+        return ang_do_hun (record, KC_EQL, KC_U);
+
+        /* Mouse movement */
+      case A_MUL:
+        if (record->event.pressed) {
+          mousekey_on(KC_MS_UP);
+          mousekey_on(KC_MS_LEFT);
+        } else {
+          mousekey_off(KC_MS_UP);
+          mousekey_off(KC_MS_LEFT);
+        }
+        mousekey_send();
+        break;
+
+      case A_MUR:
+        if (record->event.pressed) {
+          mousekey_on(KC_MS_UP);
+          mousekey_on(KC_MS_RIGHT);
+        } else {
+          mousekey_off(KC_MS_UP);
+          mousekey_off(KC_MS_RIGHT);
+        }
+        mousekey_send();
+        break;
+
+      case A_MDL:
+        if (record->event.pressed) {
+          mousekey_on(KC_MS_DOWN);
+          mousekey_on(KC_MS_LEFT);
+        } else {
+          mousekey_off(KC_MS_DOWN);
+          mousekey_off(KC_MS_LEFT);
+        }
+        mousekey_send();
+        break;
+
+      case A_MDR:
+        if (record->event.pressed) {
+          mousekey_on(KC_MS_DOWN);
+          mousekey_on(KC_MS_RIGHT);
+        } else {
+          mousekey_off(KC_MS_DOWN);
+          mousekey_off(KC_MS_RIGHT);
+        }
+        mousekey_send();
+        break;
+
+        /* Plover base */
+      case A_PLVR:
+        toggle_steno(record->event.pressed);
+        break;
+
+        /* GUI & AppSel */
+      case A_GUI:
+        if (record->event.pressed) {
+          register_code (KC_LGUI);
+          if (record->tap.count && !record->tap.interrupted) {
+            if (record->tap.count >= 2) {
+              register_code (KC_W);
+              layer_on (APPSEL);
+              set_oneshot_layer (APPSEL, ONESHOT_START);
+            }
+          } else {
+            record->tap.count = 0;
+          }
+          gui_timer = 0;
+        } else {
+          if (record->tap.count >= 2)
+            {
+              unregister_code (KC_W);
+              clear_oneshot_layer_state (ONESHOT_PRESSED);
+            }
+          gui_timer = timer_read ();
+        }
+        break;
+
+      case APP_SLK:
+        return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END);
+
+      case APP_EMCS:
+        return MACRODOWN(T(G), T(N), T(U), T(SPC), T(E), T(M), T(A), T(C), T(S), T(SPC), T(2), T(4), T(ENT), END);
+
+      case APP_TERM:
+        return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END);
+
+      case APP_CHRM:
+        return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END);
+
+      case APP_MSIC:
+        return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END);
+
+        /* Function keys */
+      case KF_1 ... KF_11:
+        ang_handle_kf (record, id);
+        break;
+      }
+
+      return MACRO_NONE;
+};
+
+uint8_t is_adore = 0;
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+  uint8_t dl;
+
+  ergodox_led_all_on();
+  for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
+    ergodox_led_all_set (i);
+    wait_ms (5);
+  }
+  wait_ms(1000);
+  for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
+    ergodox_led_all_set (i);
+    wait_ms (10);
+  }
+  ergodox_led_all_off();
+
+  if (!eeconfig_is_enabled())
+    eeconfig_init();
+  dl = eeconfig_read_default_layer ();
+  if (dl == (1UL << ADORE)) {
+    is_adore = 1;
+#if ADORE_AUTOLOG
+    log_enable = true;
+#endif
+  }
+};
+
+LEADER_EXTERNS();
+
+void ang_do_unicode (void) {
+  register_code (KC_RCTL);
+  register_code (KC_RSFT);
+  register_code (KC_U);
+  unregister_code (KC_U);
+  unregister_code (KC_RSFT);
+  unregister_code (KC_RCTL);
+  wait_ms (100);
+}
+
+void ang_tap (uint16_t codes[]) {
+  for (int i = 0; codes[i] != 0; i++) {
+    register_code (codes[i]);
+    unregister_code (codes[i]);
+    wait_ms (50);
+  }
+}
+
+#define TAP_ONCE(code)  \
+  register_code (code); \
+  unregister_code (code)
+
+void ang_tap_dance_bp_finished (qk_tap_dance_state_t *state, void *user_data) {
+  bool left, parens;
+
+  if (state->count > 2) {
+    state->count = 0;
+    return;
+  }
+
+  if (state->keycode == TD(CT_LBP))
+    left = true;
+  else
+    left = false;
+
+  if (state->count == 1)
+    parens = false;
+  else
+    parens = true;
+
+  if (parens) {
+    register_code (KC_RSFT);
+    if (left) {
+      TAP_ONCE(KC_9);
+    } else {
+      TAP_ONCE(KC_0);
+    }
+    unregister_code (KC_RSFT);
+  } else {
+    if (left) {
+      TAP_ONCE (KC_LBRC);
+    } else {
+      TAP_ONCE (KC_RBRC);
+    }
+  }
+}
+
+void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    register_code (KC_RSFT);
+    register_code (KC_SCLN);
+  } else if (state->count == 2) {
+    register_code (KC_SCLN);
+  }
+}
+
+void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_SCLN);
+    unregister_code (KC_RSFT);
+  } else if (state->count == 2) {
+    unregister_code (KC_SCLN);
+  }
+}
+
+void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    register_code (KC_MINS);
+  } else if (state->count == 2) {
+    register_code (KC_RSFT);
+    register_code (KC_MINS);
+  }
+}
+
+void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_MINS);
+  } else if (state->count == 2) {
+    unregister_code (KC_RSFT);
+    unregister_code (KC_MINS);
+  }
+}
+
+typedef struct {
+  bool layer_toggle;
+  bool sticky;
+  bool finished_once;
+} td_ta_state_t;
+
+void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
+
+  if (td_ta->finished_once) {
+    return;
+  }
+
+  if (td_ta->sticky) {
+    td_ta->sticky = false;
+    td_ta->layer_toggle = false;
+    layer_off (ARRW);
+    return;
+  }
+
+  td_ta->finished_once = true;
+  if (state->count == 1 && !state->pressed) {
+    register_code (KC_TAB);
+    td_ta->sticky = false;
+    td_ta->layer_toggle = false;
+  } else {
+    td_ta->layer_toggle = true;
+    layer_on (ARRW);
+    td_ta->sticky = (state->count == 2);
+  }
+}
+
+void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) {
+  td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
+
+  if (!td_ta->layer_toggle)
+    unregister_code (KC_TAB);
+  if (!td_ta->sticky)
+    layer_off (ARRW);
+
+  td_ta->finished_once = false;
+}
+
+const qk_tap_dance_action_t tap_dance_actions[] = {
+   [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset)
+  ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset)
+  ,[CT_TA]  = {
+     .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset },
+     .user_data = (void *)&((td_ta_state_t) { false, false, false })
+   }
+  ,[CT_LBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished)
+  ,[CT_RBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished)
+};
+
+static uint16_t uni[32];
+static uint8_t unicnt;
+static bool unimagic = false;
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+  uint8_t layer = biton32(layer_state);
+
+  if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM)
+    unregister_code (KC_LGUI);
+
+  if (layer == HUN) {
+    ergodox_right_led_2_on();
+    ergodox_right_led_3_on();
+  } else if (layer == NMDIA) {
+    ergodox_right_led_1_on();
+    ergodox_right_led_2_on();
+  } else if (layer == PLVR) {
+    ergodox_right_led_1_on ();
+    ergodox_right_led_2_on ();
+    ergodox_right_led_3_on ();
+  } else if (layer == ADORE) {
+    ergodox_right_led_1_on ();
+    ergodox_right_led_2_on ();
+    ergodox_right_led_3_on ();
+
+    ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
+  }
+
+  if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
+      ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
+    ergodox_right_led_1_set (LED_BRIGHTNESS_HI);
+    ergodox_right_led_1_on ();
+  } else {
+    ergodox_right_led_1_set (LED_BRIGHTNESS_LO);
+    if (layer != NMDIA && layer != PLVR && layer != ADORE)
+      ergodox_right_led_1_off ();
+  }
+
+  if (keyboard_report->mods & MOD_BIT(KC_LALT) ||
+      ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) {
+    ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
+    ergodox_right_led_2_on ();
+  } else {
+    ergodox_right_led_2_set (LED_BRIGHTNESS_LO);
+    if (layer != HUN && layer != NMDIA && layer != PLVR && layer != ADORE)
+      ergodox_right_led_2_off ();
+  }
+
+  if (keyboard_report->mods & MOD_BIT(KC_LCTRL) ||
+      ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) {
+    ergodox_right_led_3_set (LED_BRIGHTNESS_HI);
+    ergodox_right_led_3_on ();
+  } else {
+    ergodox_right_led_3_set (LED_BRIGHTNESS_LO);
+    if (layer != HUN && layer != PLVR && layer != ADORE)
+      ergodox_right_led_3_off ();
+  }
+
+  LEADER_DICTIONARY() {
+    leading = false;
+    leader_end ();
+
+#if KEYLOGGER_ENABLE
+    SEQ_ONE_KEY (KC_D) {
+      ergodox_led_all_on();
+      wait_ms(100);
+      ergodox_led_all_off();
+      log_enable = !log_enable;
+    }
+#endif
+
+    SEQ_ONE_KEY (KC_T) {
+      time_travel = !time_travel;
+    }
+
+    SEQ_ONE_KEY (KC_U) {
+      ang_do_unicode ();
+    }
+
+    SEQ_TWO_KEYS (KC_LEAD, KC_U) {
+      unicnt = 0;
+      unimagic = true;
+      register_code(KC_RSFT);
+      TAP_ONCE(KC_U);
+      unregister_code(KC_RSFT);
+    }
+
+    SEQ_ONE_KEY (KC_V) {
+      SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")");
+    }
+
+    SEQ_ONE_KEY (KC_L) {
+      /* λ */
+      ang_do_unicode ();
+
+      uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0};
+      ang_tap (codes);
+    }
+
+    SEQ_ONE_KEY (KC_Y) {
+      uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0};
+      ang_tap (codes);
+    }
+
+    SEQ_ONE_KEY (KC_S) {
+      ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
+      TAP_ONCE (KC_BSLS);
+      register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT);
+      ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC);
+      register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT);
+      TAP_ONCE (KC_SLSH);
+      ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
+    }
+
+    SEQ_TWO_KEYS (KC_W, KC_M) {
+      register_code (KC_LALT);
+      register_code (KC_F2);
+      unregister_code (KC_F2);
+      unregister_code (KC_LALT);
+
+      wait_ms (1000);
+
+      uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0};
+      ang_tap (codes);
+      register_code (KC_LGUI);
+      register_code (KC_UP);
+      unregister_code (KC_UP);
+      unregister_code (KC_LGUI);
+    }
+
+    SEQ_ONE_KEY (KC_A) {
+      if (is_adore == 0) {
+        default_layer_and (0);
+        default_layer_or ((1UL << ADORE));
+        eeconfig_update_default_layer ((1UL << ADORE));
+        is_adore = 1;
+
+        ergodox_led_all_off ();
+        ergodox_right_led_3_on ();
+        wait_ms (100);
+        ergodox_right_led_2_on ();
+        wait_ms (100);
+        ergodox_right_led_3_off ();
+        ergodox_right_led_1_on ();
+        wait_ms (100);
+        ergodox_right_led_2_off ();
+        wait_ms (100);
+        ergodox_right_led_1_off ();
+#if ADORE_AUTOLOG
+        log_enable = true;
+#endif
+      } else {
+#if ADORE_AUTOLOG
+        log_enable = false;
+#endif
+        is_adore = 0;
+        default_layer_and (0);
+        default_layer_or (1UL << BASE);
+        eeconfig_update_default_layer ((1UL << BASE));
+
+        ergodox_led_all_off ();
+        ergodox_right_led_1_on ();
+        wait_ms (100);
+        ergodox_right_led_2_on ();
+        wait_ms (100);
+        ergodox_right_led_1_off ();
+        ergodox_right_led_3_on ();
+        wait_ms (100);
+        ergodox_right_led_2_off ();
+        wait_ms (100);
+        ergodox_right_led_3_off ();
+      }
+    }
+  }
+}
+
+static uint16_t last4[4];
+
+bool is_uni_seq(char *seq) {
+  uint8_t i;
+
+  for (i = 0; seq[i]; i++) {
+    uint16_t code;
+    if (('1' <= seq[i]) && (seq[i] <= '9'))
+      code = seq[i] - '1' + KC_1;
+    else if (seq[i] == '0')
+      code = KC_0;
+    else
+      code = seq[i] - 'a' + KC_A;
+
+    if (i > unicnt)
+      return false;
+    if (uni[i] != code)
+      return false;
+  }
+
+  if (uni[i] == KC_ENT || uni[i] == KC_SPC)
+    return true;
+
+  return false;
+}
+
+uint16_t hex_to_keycode(uint8_t hex)
+{
+  if (hex == 0x0) {
+    return KC_0;
+  } else if (hex < 0xA) {
+    return KC_1 + (hex - 0x1);
+  } else {
+    return KC_A + (hex - 0xA);
+  }
+}
+
+void register_hex(uint16_t hex) {
+  bool leading_zeros = true;
+
+  for(int i = 3; i >= 0; i--) {
+    uint8_t digit = ((hex >> (i*4)) & 0xF);
+    if (digit != 0)
+      leading_zeros = false;
+    else if (leading_zeros)
+      continue;
+    register_code(hex_to_keycode(digit));
+    unregister_code(hex_to_keycode(digit));
+    wait_ms(10);
+  }
+}
+
+typedef struct {
+  char *symbol;
+  uint16_t codes[4];
+} qk_ucis_symbol_t;
+
+static qk_ucis_symbol_t ucis_symbol_table[] = {
+  {"poop", {0x1, 0xf4a9, 0}},
+  {"rofl", {0x1, 0xf923, 0}},
+  {"kiss", {0x1, 0xf619, 0}},
+  {"snowman", {0x2603, 0}},
+  {NULL, {}}
+};
+
+bool process_record_ucis (uint16_t keycode, keyrecord_t *record) {
+  uint8_t i;
+
+  if (!unimagic)
+    return true;
+
+  if (!record->event.pressed)
+    return true;
+
+  uni[unicnt] = keycode;
+  unicnt++;
+
+  if (keycode == KC_BSPC) {
+    if (unicnt >= 2) {
+      unicnt-= 2;
+      return true;
+    } else {
+      unicnt--;
+      return false;
+    }
+  }
+
+  if (keycode == KC_ENT || keycode == KC_SPC) {
+    bool symbol_found = false;
+
+    for (i = unicnt; i > 0; i--) {
+      register_code (KC_BSPC);
+      unregister_code (KC_BSPC);
+      wait_ms(10);
+    }
+
+    ang_do_unicode();
+    wait_ms(10);
+    for (i = 0; ucis_symbol_table[i].symbol; i++) {
+      if (is_uni_seq (ucis_symbol_table[i].symbol)) {
+        symbol_found = true;
+        for (uint8_t j = 0; ucis_symbol_table[i].codes[j]; j++) {
+          register_hex(ucis_symbol_table[i].codes[j]);
+        }
+        break;
+      }
+    }
+    if (!symbol_found) {
+      for (i = 0; i < unicnt - 1; i++) {
+        uint8_t code;
+
+        if (uni[i] > KF_1)
+          code = uni[i] - KF_1 + KC_1;
+        else
+          code = uni[i];
+        TAP_ONCE(code);
+        wait_ms (10);
+      }
+    }
+
+    unimagic = false;
+    return true;
+  }
+  return true;
+}
+
+bool process_record_user (uint16_t keycode, keyrecord_t *record) {
+#if KEYLOGGER_ENABLE
+  if (log_enable) {
+    xprintf ("KL: col=%d, row=%d\n", record->event.key.col,
+             record->event.key.row);
+  }
+#endif
+
+  if (!process_record_ucis (keycode, record))
+    return false;
+
+  if (time_travel && !record->event.pressed) {
+    uint8_t p;
+
+    // shift cache one to the left
+    for (p = 0; p < 3; p++) {
+      last4[p] = last4[p + 1];
+    }
+    last4[3] = keycode;
+
+    if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) {
+      uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0};
+      ang_tap (codes);
+      register_code (KC_RSFT);
+      register_code (KC_EQL);
+      unregister_code (KC_EQL);
+      unregister_code (KC_RSFT);
+
+      uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0};
+      ang_tap (codes2);
+
+      return false;
+    }
+  }
+
+  return true;
+}
diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md
index 6fe1775111..26dfddbe6a 100644
--- a/keyboards/ergodox/keymaps/algernon/readme.md
+++ b/keyboards/ergodox/keymaps/algernon/readme.md
@@ -16,11 +16,12 @@ Some of the things in the layout only work when one uses Spacemacs and GNOME und
     - [ADORE layer](#adore-layer)
     - [Hungarian layer](#hungarian-layer)
     - [Navigation and media layer](#navigation-and-media-layer)
-    - [One-handed layer](#one-handed-layer)
     - [Steno layer](#steno-layer)
     - [LED states](#led-states)
 * [Tools](#tools)
     - [Heatmap](#heatmap)
+* [Special features](#special-features)
+    - [Unicode Symbol Input](#unicode-symbol-input)
 * [Building](#building)
     - [Using on Windows](#using-on-windows)
 * [Changelog](#changelog)
@@ -38,7 +39,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
 * The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap.
 * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout.
 * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode.
-* The **Media** and **Hun** layer keys are one-shot, the **1Hand** and **STENO** keys are toggles.
+* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle.
 * When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key.
 * Tapping the `:` key once yields `:`, tapping it twice yields `;`.
 * The **Lead** key allows me to type in a sequence of keys, and trigger some actions:
@@ -51,6 +52,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
     - `LEAD v` prints the firmware version, the keyboard and the keymap.
     - `LEAD d` toggles logging keypress positions to the HID console.
     - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader.
+    - `LEAD LEAD u` enters the [Unicode symbol input][#unicode-symbol-input] mode.
 
 ## ADORE layer
 
@@ -74,20 +76,6 @@ On this layer, the accented characters are at the same position as their base va
 
 This layer is primarily for navigating with the cursor or the mouse, and some media things.
 
-## One-handed layer
-
-[![One-handed layer](images/one-handed-layer.png)](http://www.keyboard-layout-editor.com/#/gists/edff2495135955b8963198dace7f7ece)
-
-The one-handed layer is used in situations where the right hand is occupied, by mousing around, for example. Tapping the `OTHER` key switches which side is active. For the most part, keys remain in their usual position. When the right half is active, keys are mirrored to the left half.
-
-The differences are as follows:
-
-* The `ESC` key has been moved to the bottom row, so the `OTHER` key is easier to tap.
-* Most keys on the thumb cluster now have dual uses, and these do not change when switching sides:
-    - The `Space`/`Backspace` key sends `Space` on tap, `Backspace` when held for longer than a normal tap.
-    - The `Enter`/`Shift` key sends `Enter` on short-tap, `Shift` on long-tap.
-* The `Apps`/`BASE` key can be used to go back to the base layer, by long-tapping it. A short-tap will send the `App` key, as usual.
-
 ## Steno layer
 
 [![Steno layer for Plover](images/steno-layer.png)](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667)
@@ -103,11 +91,25 @@ For the layers, the following rules apply:
 * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active.
 * When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on.
 * When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on.
-* When the [One-handed layer](#one-handed-layer) is active, the *green* LED is on and bright, and either the *red* or the *blue* one is going to slowly blink, depending on the currently active side.
 * For the [Steno layer](#steno-layer), all LEDs will be turned on.
 
 Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on.
 
+# Special features
+
+## Unicode Symbol Input
+
+Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes.
+
+The currently supported symbols are:
+
+- `snowman`: ☃
+- `kiss`: 😙
+- `rofl`: 🤣
+- `poop`: 💩
+
+This is an experimental feature, and may or may not work reliably.
+
 # Tools
 
 ## Heatmap
@@ -133,14 +135,14 @@ To make my workflow easier, this layout is maintained in [its own repository][al
 $ git clone https://github.com/jackhumbert/qmk_firmware.git
 $ cd qmk_firmware
 $ git clone https://github.com/algernon/ergodox-layout.git \
-            keyboards/ergodox_ez/keymaps/algernon-master
-$ make KEYBOARD=ergodox_ez KEYMAP=algernon-master
+            keyboards/ergodox/keymaps/algernon-master
+$ make keyboard=ergodox keymap=algernon-master
 ```
 
 From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware):
 
 ```
-$ make KEYBOARD=ergodox_ez KEYMAP=algernon
+$ make keyboard=ergodox keymap=algernon
 ```
 
 ## Using on Windows
@@ -149,6 +151,16 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the
 
 # Changelog
 
+## v1.5 - 2016-08-12
+
+* The **1HAND** layer has been removed.
+* A `Delete` key is now available on the right thumb cluster.
+* The [ADORE](#adore-layer) layer received a major update, see the layout image above.
+* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default.
+* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer).
+* On the **ARROW** layer, `Backspace` has been replaced by `Enter`.
+* There is some experimental support for entering Unicode symbols.
+
 ## v1.4 - 2016-07-29
 
 * When toggling the key logging on or off, the LEDs will do a little dance.
-- 
cgit v1.2.3


From cafa528b88c097f02ae92a5b15b015f5653cefe7 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Fri, 12 Aug 2016 19:14:48 +0200
Subject: only aesthetics

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 71c205a489..9f838ba617 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -67,10 +67,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
-        KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP,    KC_END,     KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),    KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
+        KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN,    KC_PGUP,    KC_END,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),       KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
         KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                  KC_TRNS, KC_HOME, KC_PGDN, KC_END),
 
     /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
-- 
cgit v1.2.3


From 458607ee5eafe1cc095b258cac014c334d8e7b72 Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Fri, 12 Aug 2016 22:26:30 -0700
Subject: Corrections to the Atreus Makefile and updates to my keymap

---
 keyboards/atreus/keymaps/xyverz/keymap.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
index 0238fdbd39..02a661c8e3 100644
--- a/keyboards/atreus/keymaps/xyverz/keymap.c
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -46,14 +46,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_L1] = { /* LAYER 1 */
     {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_NO,   KC_6,    KC_7,    KC_8,    KC_9,    KC_0   },
     {KC_TAB,  KC_INS,  KC_UP,   KC_DEL,  KC_HOME, KC_NO,   KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
-    {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
+    {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
     {KC_TRNS, KC_GRV,  KC_LGUI, KC_TRNS, KC_DEL,  KC_LALT, KC_SPC,  KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
   },
   [_L2] = { /* LAYER 2 */
     {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
     {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_PLUS},
     {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12 },
+<<<<<<< HEAD
     {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET  }
+=======
+    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET}
+>>>>>>> e1abe4c... Corrections to the Atreus Makefile and updates to my keymap
   }
 };
 
-- 
cgit v1.2.3


From 3bae791372e2090b30647d431c70c233caaef26f Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Fri, 12 Aug 2016 22:30:01 -0700
Subject: Update keymap.c

---
 keyboards/atreus/keymaps/xyverz/keymap.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
index 02a661c8e3..b418cc9b5e 100644
--- a/keyboards/atreus/keymaps/xyverz/keymap.c
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -53,11 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
     {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_PLUS},
     {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12 },
-<<<<<<< HEAD
-    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET  }
-=======
     {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET}
->>>>>>> e1abe4c... Corrections to the Atreus Makefile and updates to my keymap
   }
 };
 
-- 
cgit v1.2.3


From c07fe96581f02d0ea14c50cda7565aa52406c122 Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Fri, 12 Aug 2016 23:45:40 -0700
Subject: Adding the MiniVan44 aka TheVan 44 by u/evangs to the repo. Initial
 Commit.

---
 keyboards/minivan44/Makefile                  |  75 ++++++++++++
 keyboards/minivan44/config.h                  | 162 ++++++++++++++++++++++++++
 keyboards/minivan44/keymaps/default/Makefile  |  21 ++++
 keyboards/minivan44/keymaps/default/config.h  |   8 ++
 keyboards/minivan44/keymaps/default/keymap.c  |  97 +++++++++++++++
 keyboards/minivan44/keymaps/default/readme.md |   1 +
 keyboards/minivan44/keymaps/xyverz/Makefile   |  21 ++++
 keyboards/minivan44/keymaps/xyverz/config.h   |   8 ++
 keyboards/minivan44/keymaps/xyverz/keymap.c   |  92 +++++++++++++++
 keyboards/minivan44/keymaps/xyverz/readme.md  |   1 +
 keyboards/minivan44/minivan44.c               |  28 +++++
 keyboards/minivan44/minivan44.h               |  22 ++++
 keyboards/minivan44/readme.md                 |  28 +++++
 13 files changed, 564 insertions(+)
 create mode 100644 keyboards/minivan44/Makefile
 create mode 100644 keyboards/minivan44/config.h
 create mode 100644 keyboards/minivan44/keymaps/default/Makefile
 create mode 100644 keyboards/minivan44/keymaps/default/config.h
 create mode 100644 keyboards/minivan44/keymaps/default/keymap.c
 create mode 100644 keyboards/minivan44/keymaps/default/readme.md
 create mode 100644 keyboards/minivan44/keymaps/xyverz/Makefile
 create mode 100644 keyboards/minivan44/keymaps/xyverz/config.h
 create mode 100644 keyboards/minivan44/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/minivan44/keymaps/xyverz/readme.md
 create mode 100644 keyboards/minivan44/minivan44.c
 create mode 100644 keyboards/minivan44/minivan44.h
 create mode 100644 keyboards/minivan44/readme.md

(limited to 'keyboards')

diff --git a/keyboards/minivan44/Makefile b/keyboards/minivan44/Makefile
new file mode 100644
index 0000000000..45ca127807
--- /dev/null
+++ b/keyboards/minivan44/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/minivan44/config.h b/keyboards/minivan44/config.h
new file mode 100644
index 0000000000..0ae93c0957
--- /dev/null
+++ b/keyboards/minivan44/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEAE
+#define PRODUCT_ID      0x8844
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Evan Sailer
+#define PRODUCT         TheVan 44
+#define DESCRIPTION     keyboard firmware for TV44
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
+#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/minivan44/keymaps/default/Makefile b/keyboards/minivan44/keymaps/default/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/minivan44/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/default/config.h b/keyboards/minivan44/keymaps/default/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/minivan44/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/default/keymap.c b/keyboards/minivan44/keymaps/default/keymap.c
new file mode 100644
index 0000000000..d559a4b1c7
--- /dev/null
+++ b/keyboards/minivan44/keymaps/default/keymap.c
@@ -0,0 +1,97 @@
+#include "minivan44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+#define _L3 5
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = { /* Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_DV] = { /* Dvorak */
+    {KC_TAB,  KC_COMM, KC_DOT,  KC_SLSH, KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_CM] = { /* Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L2] = { /* LAYER 2 */
+    {_______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______ },
+    {KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______ },
+    {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L3] = { /* LAYER 3 */
+    {_______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______ },
+    {KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______ },
+    {KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______ },
+    {_______, KC_LSFT, KC_B,    KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_C,    _______, _______, XXXXXXX, _______ }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/minivan44/keymaps/default/readme.md b/keyboards/minivan44/keymaps/default/readme.md
new file mode 100644
index 0000000000..189a9c0ff8
--- /dev/null
+++ b/keyboards/minivan44/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for minivan44
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/xyverz/Makefile b/keyboards/minivan44/keymaps/xyverz/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/minivan44/keymaps/xyverz/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/xyverz/config.h b/keyboards/minivan44/keymaps/xyverz/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/minivan44/keymaps/xyverz/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/xyverz/keymap.c b/keyboards/minivan44/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..f995da0e7e
--- /dev/null
+++ b/keyboards/minivan44/keymaps/xyverz/keymap.c
@@ -0,0 +1,92 @@
+#include "minivan44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DV 0
+#define _QW 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DV] = { /* 0: Dvorak */
+    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT  },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_QW] = { /* 1: Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_CM] = { /* 2: Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_L1] = {/* 1: FN 1 */
+    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ }
+  },
+
+  [_L2] = { /* 2: FN 2 */
+    {KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_ESC  },
+    {_______, KC_F11,  KC_F12,  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_VOLD, _______ },
+    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ }
+  }
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+
diff --git a/keyboards/minivan44/keymaps/xyverz/readme.md b/keyboards/minivan44/keymaps/xyverz/readme.md
new file mode 100644
index 0000000000..189a9c0ff8
--- /dev/null
+++ b/keyboards/minivan44/keymaps/xyverz/readme.md
@@ -0,0 +1 @@
+# The default keymap for minivan44
\ No newline at end of file
diff --git a/keyboards/minivan44/minivan44.c b/keyboards/minivan44/minivan44.c
new file mode 100644
index 0000000000..be8214fd5d
--- /dev/null
+++ b/keyboards/minivan44/minivan44.c
@@ -0,0 +1,28 @@
+#include "minivan44.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/minivan44/minivan44.h b/keyboards/minivan44/minivan44.h
new file mode 100644
index 0000000000..c6119c2e16
--- /dev/null
+++ b/keyboards/minivan44/minivan44.h
@@ -0,0 +1,22 @@
+#ifndef MINIVAN44_H
+#define MINIVAN44_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33,           K37, K38,      K39,      K3B  \
+) \
+{ \
+    { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \
+    { K10,   K11,   K12,   K13,  K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B }, \
+    { K20,   K21,   K22,   K23,  K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B }, \
+    { K30,   K31,   K32,   K33,  KC_NO, KC_NO, KC_NO, K37,   K38,   K39,   K3A,   K3B }  \
+
+#endif
diff --git a/keyboards/minivan44/readme.md b/keyboards/minivan44/readme.md
new file mode 100644
index 0000000000..59b62b0e66
--- /dev/null
+++ b/keyboards/minivan44/readme.md
@@ -0,0 +1,28 @@
+minivan44 keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/minivan44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
-- 
cgit v1.2.3


From 2d0f585e426084b13fecc642cdda77506e2bfbf9 Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Sat, 13 Aug 2016 10:36:08 -0700
Subject: Renamed minivan44 to tv44 in all occurrences per wishes of Jack and
 Evan.

---
 keyboards/tv44/Makefile                  |  75 ++++++++++++++
 keyboards/tv44/config.h                  | 162 +++++++++++++++++++++++++++++++
 keyboards/tv44/keymaps/default/Makefile  |  21 ++++
 keyboards/tv44/keymaps/default/config.h  |   8 ++
 keyboards/tv44/keymaps/default/keymap.c  |  97 ++++++++++++++++++
 keyboards/tv44/keymaps/default/readme.md |   1 +
 keyboards/tv44/keymaps/xyverz/Makefile   |  21 ++++
 keyboards/tv44/keymaps/xyverz/config.h   |   8 ++
 keyboards/tv44/keymaps/xyverz/keymap.c   |  92 ++++++++++++++++++
 keyboards/tv44/keymaps/xyverz/readme.md  |   1 +
 keyboards/tv44/readme.md                 |  28 ++++++
 keyboards/tv44/tv44.c                    |  28 ++++++
 keyboards/tv44/tv44.h                    |  22 +++++
 13 files changed, 564 insertions(+)
 create mode 100644 keyboards/tv44/Makefile
 create mode 100644 keyboards/tv44/config.h
 create mode 100644 keyboards/tv44/keymaps/default/Makefile
 create mode 100644 keyboards/tv44/keymaps/default/config.h
 create mode 100644 keyboards/tv44/keymaps/default/keymap.c
 create mode 100644 keyboards/tv44/keymaps/default/readme.md
 create mode 100644 keyboards/tv44/keymaps/xyverz/Makefile
 create mode 100644 keyboards/tv44/keymaps/xyverz/config.h
 create mode 100644 keyboards/tv44/keymaps/xyverz/keymap.c
 create mode 100644 keyboards/tv44/keymaps/xyverz/readme.md
 create mode 100644 keyboards/tv44/readme.md
 create mode 100644 keyboards/tv44/tv44.c
 create mode 100644 keyboards/tv44/tv44.h

(limited to 'keyboards')

diff --git a/keyboards/tv44/Makefile b/keyboards/tv44/Makefile
new file mode 100644
index 0000000000..45ca127807
--- /dev/null
+++ b/keyboards/tv44/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/tv44/config.h b/keyboards/tv44/config.h
new file mode 100644
index 0000000000..0ae93c0957
--- /dev/null
+++ b/keyboards/tv44/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEAE
+#define PRODUCT_ID      0x8844
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Evan Sailer
+#define PRODUCT         TheVan 44
+#define DESCRIPTION     keyboard firmware for TV44
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
+#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/tv44/keymaps/default/Makefile b/keyboards/tv44/keymaps/default/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/default/config.h b/keyboards/tv44/keymaps/default/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/default/keymap.c b/keyboards/tv44/keymaps/default/keymap.c
new file mode 100644
index 0000000000..6a4fef3da2
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/keymap.c
@@ -0,0 +1,97 @@
+#include "tv44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+#define _L3 5
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = { /* Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_DV] = { /* Dvorak */
+    {KC_TAB,  KC_COMM, KC_DOT,  KC_SLSH, KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_CM] = { /* Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L2] = { /* LAYER 2 */
+    {_______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______ },
+    {KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______ },
+    {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L3] = { /* LAYER 3 */
+    {_______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______ },
+    {KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______ },
+    {KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______ },
+    {_______, KC_LSFT, KC_B,    KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_C,    _______, _______, XXXXXXX, _______ }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/tv44/keymaps/default/readme.md b/keyboards/tv44/keymaps/default/readme.md
new file mode 100644
index 0000000000..ac84c08cfa
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for tv44
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/xyverz/Makefile b/keyboards/tv44/keymaps/xyverz/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/xyverz/config.h b/keyboards/tv44/keymaps/xyverz/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/xyverz/keymap.c b/keyboards/tv44/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..8cbcf8d35a
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/keymap.c
@@ -0,0 +1,92 @@
+#include "tv44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DV 0
+#define _QW 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DV] = { /* 0: Dvorak */
+    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT  },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_QW] = { /* 1: Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_CM] = { /* 2: Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_L1] = {/* 1: FN 1 */
+    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {KC_ESC,  KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ }
+  },
+
+  [_L2] = { /* 2: FN 2 */
+    {KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_ESC  },
+    {_______, KC_F11,  KC_F12,  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_VOLD, _______ },
+    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ }
+  }
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+
diff --git a/keyboards/tv44/keymaps/xyverz/readme.md b/keyboards/tv44/keymaps/xyverz/readme.md
new file mode 100644
index 0000000000..ac84c08cfa
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/readme.md
@@ -0,0 +1 @@
+# The default keymap for tv44
\ No newline at end of file
diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md
new file mode 100644
index 0000000000..e3b557fe2d
--- /dev/null
+++ b/keyboards/tv44/readme.md
@@ -0,0 +1,28 @@
+tv44 keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
diff --git a/keyboards/tv44/tv44.c b/keyboards/tv44/tv44.c
new file mode 100644
index 0000000000..6dc0efd28e
--- /dev/null
+++ b/keyboards/tv44/tv44.c
@@ -0,0 +1,28 @@
+#include "tv44.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/tv44/tv44.h b/keyboards/tv44/tv44.h
new file mode 100644
index 0000000000..4c30174acc
--- /dev/null
+++ b/keyboards/tv44/tv44.h
@@ -0,0 +1,22 @@
+#ifndef TV44_H
+#define TV44_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33,           K37, K38,      K39,      K3B  \
+) \
+{ \
+    { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \
+    { K10,   K11,   K12,   K13,  K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B }, \
+    { K20,   K21,   K22,   K23,  K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B }, \
+    { K30,   K31,   K32,   K33,  KC_NO, KC_NO, KC_NO, K37,   K38,   K39,   K3A,   K3B }  \
+
+#endif
-- 
cgit v1.2.3


From e87506767cec6410d1a93c15d68452815c9c3553 Mon Sep 17 00:00:00 2001
From: Ian Sterling <xyverz@gmail.com>
Date: Sat, 13 Aug 2016 10:44:42 -0700
Subject: Removal of old minivan44 folder.

---
 keyboards/minivan44/Makefile                  |  75 ------------
 keyboards/minivan44/config.h                  | 162 --------------------------
 keyboards/minivan44/keymaps/default/Makefile  |  21 ----
 keyboards/minivan44/keymaps/default/config.h  |   8 --
 keyboards/minivan44/keymaps/default/keymap.c  |  97 ---------------
 keyboards/minivan44/keymaps/default/readme.md |   1 -
 keyboards/minivan44/keymaps/xyverz/Makefile   |  21 ----
 keyboards/minivan44/keymaps/xyverz/config.h   |   8 --
 keyboards/minivan44/keymaps/xyverz/keymap.c   |  92 ---------------
 keyboards/minivan44/keymaps/xyverz/readme.md  |   1 -
 keyboards/minivan44/minivan44.c               |  28 -----
 keyboards/minivan44/minivan44.h               |  22 ----
 keyboards/minivan44/readme.md                 |  28 -----
 13 files changed, 564 deletions(-)
 delete mode 100644 keyboards/minivan44/Makefile
 delete mode 100644 keyboards/minivan44/config.h
 delete mode 100644 keyboards/minivan44/keymaps/default/Makefile
 delete mode 100644 keyboards/minivan44/keymaps/default/config.h
 delete mode 100644 keyboards/minivan44/keymaps/default/keymap.c
 delete mode 100644 keyboards/minivan44/keymaps/default/readme.md
 delete mode 100644 keyboards/minivan44/keymaps/xyverz/Makefile
 delete mode 100644 keyboards/minivan44/keymaps/xyverz/config.h
 delete mode 100644 keyboards/minivan44/keymaps/xyverz/keymap.c
 delete mode 100644 keyboards/minivan44/keymaps/xyverz/readme.md
 delete mode 100644 keyboards/minivan44/minivan44.c
 delete mode 100644 keyboards/minivan44/minivan44.h
 delete mode 100644 keyboards/minivan44/readme.md

(limited to 'keyboards')

diff --git a/keyboards/minivan44/Makefile b/keyboards/minivan44/Makefile
deleted file mode 100644
index 45ca127807..0000000000
--- a/keyboards/minivan44/Makefile
+++ /dev/null
@@ -1,75 +0,0 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
-	include ../../Makefile
-endif
-
-
diff --git a/keyboards/minivan44/config.h b/keyboards/minivan44/config.h
deleted file mode 100644
index 0ae93c0957..0000000000
--- a/keyboards/minivan44/config.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEAE
-#define PRODUCT_ID      0x8844
-#define DEVICE_VER      0x0002
-#define MANUFACTURER    Evan Sailer
-#define PRODUCT         TheVan 44
-#define DESCRIPTION     keyboard firmware for TV44
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
-#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/minivan44/keymaps/default/Makefile b/keyboards/minivan44/keymaps/default/Makefile
deleted file mode 100644
index f4671a9d11..0000000000
--- a/keyboards/minivan44/keymaps/default/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/default/config.h b/keyboards/minivan44/keymaps/default/config.h
deleted file mode 100644
index df06a26206..0000000000
--- a/keyboards/minivan44/keymaps/default/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/default/keymap.c b/keyboards/minivan44/keymaps/default/keymap.c
deleted file mode 100644
index d559a4b1c7..0000000000
--- a/keyboards/minivan44/keymaps/default/keymap.c
+++ /dev/null
@@ -1,97 +0,0 @@
-#include "minivan44.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _QW 0
-#define _DV 1
-#define _CM 2
-#define _L1 3
-#define _L2 4
-#define _L3 5
-
-// Macro name shortcuts
-#define QWERTY M(_QW)
-#define DVORAK M(_DV)
-#define COLEMAK M(_CM)
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QW] = { /* Qwerty */
-    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
-    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
-    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
-  },
-  [_DV] = { /* Dvorak */
-    {KC_TAB,  KC_COMM, KC_DOT,  KC_SLSH, KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_BSPC },
-    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
-    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
-    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
-  },
-  [_CM] = { /* Colemak */
-    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
-    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1) },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
-    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
-  },
-  [_L1] = { /* LAYER 1 */
-    {KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL  },
-    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
-    {_______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
-    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
-  },
-  [_L2] = { /* LAYER 2 */
-    {_______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______ },
-    {KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT  },
-    {_______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______ },
-    {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
-  },
-  [_L3] = { /* LAYER 3 */
-    {_______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______ },
-    {KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______ },
-    {KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______ },
-    {_______, KC_LSFT, KC_B,    KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_C,    _______, _______, XXXXXXX, _______ }
-  }
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case _DV:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_DV);
-          }
-          break;
-        case _QW:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_QW);
-          }
-          break;
-        case _CM:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_CM);
-          }
-          break;
-      }
-    return MACRO_NONE;
-};
diff --git a/keyboards/minivan44/keymaps/default/readme.md b/keyboards/minivan44/keymaps/default/readme.md
deleted file mode 100644
index 189a9c0ff8..0000000000
--- a/keyboards/minivan44/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for minivan44
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/xyverz/Makefile b/keyboards/minivan44/keymaps/xyverz/Makefile
deleted file mode 100644
index f4671a9d11..0000000000
--- a/keyboards/minivan44/keymaps/xyverz/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/xyverz/config.h b/keyboards/minivan44/keymaps/xyverz/config.h
deleted file mode 100644
index df06a26206..0000000000
--- a/keyboards/minivan44/keymaps/xyverz/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
diff --git a/keyboards/minivan44/keymaps/xyverz/keymap.c b/keyboards/minivan44/keymaps/xyverz/keymap.c
deleted file mode 100644
index f995da0e7e..0000000000
--- a/keyboards/minivan44/keymaps/xyverz/keymap.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include "minivan44.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-#define _DV 0
-#define _QW 1
-#define _CM 2
-#define _L1 3
-#define _L2 4
-
-// Macro name shortcuts
-#define DVORAK M(_DV)
-#define QWERTY M(_QW)
-#define COLEMAK M(_CM)
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_DV] = { /* 0: Dvorak */
-    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
-    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT  },
-    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT },
-    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
-  },
-
-  [_QW] = { /* 1: Qwerty */
-    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
-    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT  },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
-    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
-  },
-
-  [_CM] = { /* 2: Colemak */
-    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
-    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT  },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
-    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
-  },
-
-  [_L1] = {/* 1: FN 1 */
-    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL  },
-    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
-    {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
-    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ }
-  },
-
-  [_L2] = { /* 2: FN 2 */
-    {KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_ESC  },
-    {_______, KC_F11,  KC_F12,  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT  },
-    {_______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_VOLD, _______ },
-    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ }
-  }
-
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case _DV:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_DV);
-          }
-          break;
-        case _QW:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_QW);
-          }
-          break;
-        case _CM:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_CM);
-          }
-          break;
-      }
-    return MACRO_NONE;
-};
-
-
diff --git a/keyboards/minivan44/keymaps/xyverz/readme.md b/keyboards/minivan44/keymaps/xyverz/readme.md
deleted file mode 100644
index 189a9c0ff8..0000000000
--- a/keyboards/minivan44/keymaps/xyverz/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for minivan44
\ No newline at end of file
diff --git a/keyboards/minivan44/minivan44.c b/keyboards/minivan44/minivan44.c
deleted file mode 100644
index be8214fd5d..0000000000
--- a/keyboards/minivan44/minivan44.c
+++ /dev/null
@@ -1,28 +0,0 @@
-#include "minivan44.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
diff --git a/keyboards/minivan44/minivan44.h b/keyboards/minivan44/minivan44.h
deleted file mode 100644
index c6119c2e16..0000000000
--- a/keyboards/minivan44/minivan44.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef MINIVAN44_H
-#define MINIVAN44_H
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
-    K30, K31, K32, K33,           K37, K38,      K39,      K3B  \
-) \
-{ \
-    { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \
-    { K10,   K11,   K12,   K13,  K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B }, \
-    { K20,   K21,   K22,   K23,  K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B }, \
-    { K30,   K31,   K32,   K33,  KC_NO, KC_NO, KC_NO, K37,   K38,   K39,   K3A,   K3B }  \
-
-#endif
diff --git a/keyboards/minivan44/readme.md b/keyboards/minivan44/readme.md
deleted file mode 100644
index 59b62b0e66..0000000000
--- a/keyboards/minivan44/readme.md
+++ /dev/null
@@ -1,28 +0,0 @@
-minivan44 keyboard firmware
-======================
-
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/minivan44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-
-To build with the default keymap, simply run `make`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
-
-```
-$ make keymap=[default|jack|<name>]
-```
-
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
-- 
cgit v1.2.3


From ba7f2b1d3f350b72236a19440ec7026fa0cfd2ba Mon Sep 17 00:00:00 2001
From: Nicholas Keene <git@nicholaskeene.com>
Date: Sat, 13 Aug 2016 15:53:03 -0500
Subject: The Ordinary Layout is the unsurprising layout

---
 keyboards/ergodox/keymaps/ordinary/keymap.c        | 241 +++++++++------------
 .../ergodox/keymaps/ordinary/ordinary-base.png     | Bin 99605 -> 76549 bytes
 .../ergodox/keymaps/ordinary/ordinary-base.txt     |  16 +-
 .../ergodox/keymaps/ordinary/ordinary-media.png    | Bin 124144 -> 96205 bytes
 .../ergodox/keymaps/ordinary/ordinary-media.txt    |  36 +--
 .../ergodox/keymaps/ordinary/ordinary-special.png  | Bin 63065 -> 68418 bytes
 .../ergodox/keymaps/ordinary/ordinary-special.txt  |  20 +-
 .../ergodox/keymaps/ordinary/ordinary-symbol.png   | Bin 103735 -> 73009 bytes
 .../ergodox/keymaps/ordinary/ordinary-symbol.txt   |  20 +-
 keyboards/ergodox/keymaps/ordinary/readme.md       |   8 +-
 10 files changed, 158 insertions(+), 183 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c
index bf0574ea2c..eda45b7cb3 100644
--- a/keyboards/ergodox/keymaps/ordinary/keymap.c
+++ b/keyboards/ergodox/keymaps/ordinary/keymap.c
@@ -1,23 +1,20 @@
-#include "ergodox.h"
+#include "ergodox_ez.h"
 #include "led.h"
 #include "debug.h"
 #include "action_layer.h"
 #include "action_util.h"
-#include "mousekey.h"
 
 #define BASE   0 // default layer
 #define SYMB   1 // symbols layer
 #define MDIA   2 // media layer
 #define SPEC   3 // special layer
 
-#define LCaps 10 // left caps-shift key
-#define LSymb 11 // left symbol-shift key
-#define LMdia 12 // left media-shift key
-#define LSpec 13 // left special-shift key
-#define RCaps 14 // right caps-shift key
-#define RSymb 15 // right symbol-shift key
-#define RMdia 16 // right media-shift key
-#define RSpec 17 // right special-shift key
+#define LSymb 10 // left symbol-shift key
+#define LMdia 11 // left media-shift key
+#define LSpec 12 // left special-shift key
+#define RSymb 13 // right symbol-shift key
+#define RMdia 14 // right media-shift key
+#define RSpec 15 // right special-shift key
 
 #define MUL   20 // mouse up left
 #define MUR   21 // mouse up right
@@ -25,13 +22,14 @@
 #define MDR   23 // mouse down right
 
 /*
- * The Ordinary Layout for the Ergodox EZ keyboard, v4
- * 
+ * The Ordinary Layout for the Ergodox EZ keyboard, v4.20
+ *
  * Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com
  *
  * No rights reserved. This software is in the public domain.
  * Credit me if you are friendly but if you're a jerk don't bother.
- * 
+ * If you use or modify this layout I would love to hear from you.
+ *
  * Details: readme.md
  *          https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary
  */
@@ -61,10 +59,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [BASE] = KEYMAP(
 // left hand
- F(LSpec),KC_1,KC_2,KC_3   ,KC_4  ,KC_5  ,KC_ESC
+ F(LSpec)  ,KC_1   ,KC_2   ,KC_3   ,KC_4  ,KC_5  ,KC_ESC
 ,F(LMdia)  ,KC_Q   ,KC_W   ,KC_E   ,KC_R  ,KC_T  ,KC_LBRC
 ,M(LSymb)  ,KC_A   ,KC_S   ,KC_D   ,KC_F  ,KC_G
-,M(LCaps)  ,KC_Z   ,KC_X   ,KC_C   ,KC_V  ,KC_B  ,LSFT(KC_TAB)
+,KC_LSFT   ,KC_Z   ,KC_X   ,KC_C   ,KC_V  ,KC_B  ,LSFT(KC_TAB)
 ,KC_LCTL   ,KC_MEH ,KC_HYPR,KC_LALT,KC_LGUI
                                          ,KC_HOME,KC_END
                                                  ,KC_PGUP
@@ -73,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                                      ,KC_MINS ,KC_6   ,KC_7   ,KC_8   ,KC_9    ,KC_0     ,F(RSpec)
                                                                      ,KC_RBRC ,KC_Y   ,KC_U   ,KC_I   ,KC_O    ,KC_P     ,F(RMdia)
                                                                               ,KC_H   ,KC_J   ,KC_K   ,KC_L    ,KC_SCLN  ,F(RSymb)
-                                                                     ,KC_TAB  ,KC_N   ,KC_M   ,KC_COMM,KC_DOT  ,KC_SLSH  ,M(RCaps)
+                                                                     ,KC_TAB  ,KC_N   ,KC_M   ,KC_COMM,KC_DOT  ,KC_SLSH  ,KC_RSFT
                                                                                       ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH   ,KC_RCTL
                                                                      ,KC_LEFT ,KC_RGHT
                                                                      ,KC_UP
@@ -91,8 +89,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |-----------+------+------+------+------+------| Tab  |           | Shift|------+------+------+------+------+-----------|
  * |           |   %  |   ^  |   [  |   ]  |   ~  |      |           |  -Tab|   \  |   1  |   2  |   3  |   -  |           |
  * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *     | LCtrl | Meh  |Hyper | LAlt | LGui |                                       |RGui/0|RAlt/.|Hypr/=|Meh/+ |RCtrl/Ent|
- *     `-----------------------------------'                                       `-------------------------------------'
+ *     | LCtrl | Meh  |Hyper | LAlt | LGui |                                       |   0  |   .  |   =  |   +  |  Ent  |
+ *     `-----------------------------------'                                       `-----------------------------------'
  *                                         ,-------------.           ,-------------.
  *                                         | Left | Right|           | Home | End  |
  *                                  ,------|------|------|           |------+------+------.
@@ -105,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // left hand
  KC_TRNS ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,KC_ESC
 ,KC_TRNS ,KC_EXLM ,KC_AT   ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM)
-,KC_TRNS ,KC_HASH ,KC_DLR  ,KC_LPRN ,KC_RPRN ,KC_GRV 
+,KC_TRNS ,KC_HASH ,KC_DLR  ,KC_LPRN ,KC_RPRN ,KC_GRV
 ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB
 ,KC_LCTL   ,KC_MEH ,KC_HYPR,KC_LALT ,KC_LGUI
                                              ,KC_LEFT ,KC_RGHT
@@ -116,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                                      ,LSFT(KC_DOT),KC_PIPE ,KC_7  ,KC_8   ,KC_9  ,KC_SLSH ,KC_TRNS
                                                                                   ,KC_SLSH ,KC_4  ,KC_5   ,KC_6  ,KC_ASTR ,KC_TRNS
                                                                      ,LSFT(KC_TAB),KC_BSLS ,KC_1  ,KC_2   ,KC_3  ,KC_MINS ,KC_TRNS
-                                                                                           ,GUI_T(KC_0),ALT_T(KC_DOT),ALL_T(KC_EQL),MEH_T(KC_PLUS),CTL_T(KC_ENT)
+                                                                                           ,KC_0  ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT
                                                                      ,KC_HOME     ,KC_END
                                                                      ,KC_PGUP
                                                                      ,KC_PGDN     ,KC_BSPC ,KC_DEL
@@ -124,24 +122,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /******* Media Layer *******************************************************************************************************
  *
- * ,---------------------------------------------------------------.           ,---------------------------------------------------------------.
- * |      |   F11   |   F12   |   F13   |   F14   |   F15   | Esc  |           |      |   F16   |   F17   |   F18   |   F19   |   F20   |      |
- * |------+---------+---------+---------+---------+----------------|           |------+---------+---------+---------+---------+---------+------|
- * |      |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll|           |Scroll|PrintScrn|   Home  |    Up   |   PgUp  |   Mail  |      |
- * |------+---------+---------+---------+---------+---------|  Up  |           |  Up  |---------+---------+---------+---------+---------+------|
- * |      |  Sleep  |MouseLeft|MouseDown|MouseRght|Volume Dn|------|           |------| Num Lock|   Left  |   Down  |   Right | MyComp  |      |
- * |------+---------+---------+---------+---------+---------|Scroll|           |Scroll|---------+---------+---------+---------+---------+------|
- * |      |         |MouseDnLf|MouseDown|MouseDnRg|  Mute   | Down |           | Down |         |   End   |   Down  |   PgDn  |         |      |
- * `------+---------+---------+---------+---------+----------------'           `----------------+---------+---------+---------+---------+------'
- *  |LCtrl|   Meh   |  MClick | LClick  |  R Click|                                             |Cmd/Insrt|Optn/Del | Hyper   |  Meh    |RCtrl|
- *  `---------------------------------------------'                                             `---------------------------------------------'
- *                                                   ,-------------.           ,-------------.
- *                                                   | Stop |Refrsh|           | Prev | Next |
- *                                            ,------|------|------|           |------+------+------.
- *                                            |Brwser|Brwser|Search|           |VolUp |      |      |
- *                                            |Back  | Fwd  |------|           |------| Stop | Play-|
- *                                            |      |      | Home |           |VolDn |      | Pause|
- *                                            `--------------------'           `--------------------'
+ * ,---------------------------------------------------------------.    ,---------------------------------------------------------------.
+ * |      |   F11   |   F12   |   F13   |   F14   |   F15   | Esc  |    |      |   F16   |   F17   |   F18   |   F19   |   F20   |      |
+ * |------+---------+---------+---------+---------+----------------|    |------+---------+---------+---------+---------+---------+------|
+ * |      |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll|    |Scroll|PrintScrn|   Home  |    Up   |   PgUp  |   Mail  |      |
+ * |------+---------+---------+---------+---------+---------|  Up  |    |  Up  |---------+---------+---------+---------+---------+------|
+ * |      |  Sleep  |MouseLeft|MouseDown|MouseRght|Volume Dn|------|    |------| Num Lock|   Left  |   Down  |   Right | MyComp  |      |
+ * |------+---------+---------+---------+---------+---------|Scroll|    |Scroll|---------+---------+---------+---------+---------+------|
+ * |      |         |MouseDnLf|MouseDown|MouseDnRg|  Mute   | Down |    | Down |         |   End   |   Down  |   PgDn  |         |      |
+ * `------+---------+---------+---------+---------+----------------'    `----------------+---------+---------+---------+---------+------'
+ *  |LCtrl|   Meh   |  MClick | LClick  |  R Click|                                      |Cmd/Insrt|Optn/Del | Hyper   |  Meh    |RCtrl|
+ *  `---------------------------------------------'                                      `---------------------------------------------'
+ *                                                   ,-------------.    ,-------------.
+ *                                                   | Stop |Refrsh|    | Prev | Next |
+ *                                            ,------|------|------|    |------+------+------.
+ *                                            |Brwser|Brwser|Search|    |VolUp |      |      |
+ *                                            |Back  | Fwd  |------|    |------| Stop | Play-|
+ *                                            |      |      | Home |    |VolDn |      | Pause|
+ *                                            `--------------------'    `--------------------'
  */
 [MDIA] = KEYMAP(
 // left hand
@@ -166,67 +164,63 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /******* Special Layer *****************************************************************************************************
  *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * |           |  Esc |      |      |      |      |      |           |      |      |      |      |      | Bspc |           |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |      |           |      |      |      |      |      |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |------|           |------|      |      |      |      |      |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |      |      |      |      |      |      |           |      |      |      |      |      |      | RShift    |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *      |      |      |      |      |      |                                       |      |      |      |      |      |
- *      `----------------------------------'                                       `----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         |      |      |           |      |      |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      |      |           |      |      |      |
- *                                  |      |      |------|           |------|      |      |
- *                                  |      |      |      |           |      |      |      |
- *                                  `--------------------'           `--------------------'
+ * ,-------------------------------------------------------.    ,-------------------------------------------------------.
+ * |             |  Esc |      |      |      |      |      |    |      |      |      |      |   -  | Bspc |             |
+ * |-------------+------+------+------+------+-------------|    |------+------+------+------+------+------+-------------|
+ * | Media Lock  |      |      |      |      |      |      |    |      |      |      |      |  [   |   ]  | Media Lock  |
+ * |-------------+------+------+------+------+------|      |    |      |------+------+------+------+------+-------------|
+ * | Symbol Lock |      |      |      |      |      |------|    |------|      |      |      |      |      | Symbol Lock |
+ * |-------------+------+------+------+------+------|      |    |      |------+------+------+------+------+-------------|
+ * | Caps Lock   |      |      |      |      |      |      |    |      |      |      |      |      |      | Caps Lock   |
+ * `-------------+------+------+------+------+-------------'    `-------------+------+------+------+------+-------------'
+ *      |        |      |      |      |      |                                |      |      |      |      |        |
+ *      `------------------------------------'                                `------------------------------------'
+ *                                         ,-------------.     ,-------------.
+ *                                         |      |      |     |      |      |
+ *                                  ,------|------|------|     |------+------+------.
+ *                                  |      |      |      |     |      |      |      |
+ *                                  |      |      |------|     |------|      |      |
+ *                                  |      |      |      |     |      |      |      |
+ *                                  `--------------------'     `--------------------'
  */
 [SPEC] = KEYMAP(
 // left hand
  KC_TRNS ,KC_ESC  ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
 ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
 ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_CAPS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
 ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
                                              ,KC_TRNS ,KC_TRNS
                                                       ,KC_TRNS
                                      ,KC_TRNS,KC_TRNS ,KC_TRNS
-                                                                     // right hand
-                                                                     ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_BSPC ,KC_TRNS
-                                                                     ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-                                                                              ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-                                                                     ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_RSFT
-                                                                                       ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
-
-                                                                     ,KC_TRNS ,KC_TRNS
-                                                                     ,KC_TRNS
-                                                                     ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                             // right hand
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_MINS ,KC_BSPC ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_LBRC ,KC_RBRC ,KC_TRNS
+                                                                      ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_CAPS
+                                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS
+                                                             ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS
     )
 };
 
 const uint16_t PROGMEM fn_actions[] = {
      // the faux shift keys are implemented as macro taps
-     [LCaps] = ACTION_MACRO_TAP(LCaps)
-    ,[LSymb] = ACTION_MACRO_TAP(LSymb)
+     [LSymb] = ACTION_MACRO_TAP(LSymb)
     ,[LMdia] = ACTION_MACRO_TAP(LMdia)
     ,[LSpec] = ACTION_MACRO_TAP(LSpec)
-    ,[RCaps] = ACTION_MACRO_TAP(RCaps)
     ,[RSymb] = ACTION_MACRO_TAP(RSymb)
     ,[RMdia] = ACTION_MACRO_TAP(RMdia)
     ,[RSpec] = ACTION_MACRO_TAP(RSpec)
 };
 
-uint16_t caps_shift = 0;
 uint16_t symb_shift = 0;
 uint16_t mdia_shift = 0;
+uint16_t spec_shift = 0;
 
-bool symb_lock = false;
 bool mdia_lock = false;
+bool symb_lock = false;
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
@@ -237,50 +231,28 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         // only because sometimes rapid pressing led to irregular events; this way the states
         // are self healing during use.
 
-        case LCaps: // both caps-shift keys trigger Left Shift
-        case RCaps: // so they don't interfere with the magic combo
-        if (record->event.pressed && !record->tap.count) {
-            if(++caps_shift > 2) caps_shift = 2;
-            if(caps_shift == 2)  {
-                register_code(KC_CAPS);
-                unregister_code(KC_CAPS);
-            } else if(caps_shift == 1) {
-                register_code(KC_LSFT);
-            }
-        } else {
-            if(--caps_shift < 0) caps_shift = 0;
-            if(caps_shift == 0) unregister_code(KC_LSFT);
-        }
-        break;
-
-        case LSymb:
-        if (record->event.pressed) {
-            if(++symb_shift > 2) symb_shift = 2;
-            if(symb_shift == 2)  {
-                symb_lock = !symb_lock;
-            } else if(symb_shift == 1) {
-                layer_on(SYMB);
-            }
-        } else {
-            if(--symb_shift < 0) symb_shift = 0;
-            if((symb_shift == 0) && (!symb_lock)) layer_off(SYMB);
+        case LSymb:                                               //
+        if (record->event.pressed) {                              // when the LSymb button is pressed
+            if(++symb_shift > 2) mdia_shift = 2;                  // increment the symb shift count, max two
+            if(spec_shift) symb_lock = !symb_lock;                // if the Special layer is on, toggle the shift lock
+            layer_on(SYMB);                                       // in any case, turn on the Symbols layer
+        } else {                                                  // when the LSymb button is released
+            if(--symb_shift < 0) symb_shift = 0;                  // decrement the shift count, minimum zero
+            if((!symb_shift) && (!symb_lock)) layer_off(SYMB);    // if both shifts are released and the lock is off, turn off the Symbols layer
         }
         break;
 
         case LMdia:
         if (record->event.pressed) {
-            if (record->tap.count && (!mdia_shift) && (!mdia_lock)) {
+           if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
                 register_code(KC_TAB);
             } else {
+                if(spec_shift) mdia_lock = !mdia_lock;
                 if(++mdia_shift > 2) mdia_shift = 2;
-                if(mdia_shift == 2)  {
-                    mdia_lock = !mdia_lock;
-                } else if(mdia_shift == 1) {
-                    layer_on(MDIA);
-                }
+                layer_on(MDIA);
             }
         } else {
-            if(record->tap.count && (!mdia_shift) && (!mdia_lock)) {
+            if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
                 unregister_code(KC_TAB);
             } else {
                 if(--mdia_shift < 0) mdia_shift = 0;
@@ -290,35 +262,36 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         break;
 
         case LSpec:
-        if (record->event.pressed) {
-            if (record->tap.count && !record->tap.interrupted) {
-                register_code(KC_GRV);
+        if (record->event.pressed) {                                     // when the LSpec button is pressed
+            if(symb_shift) symb_lock == !symb_lock;                      // if another layer button is engaged, then
+            else if(mdia_shift) mdia_lock = !mdia_lock;                  // lock that layer, be it caps or symb or mdia
+            else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) {
+                register_code(KC_GRV);                                   // otherwise, if it's an uninterrupted tap, emit a char
             } else {
-                layer_on(SPEC);
+                if(++spec_shift > 2) spec_shift = 2;
+                layer_on(SPEC);                                          // otherwise, turn on the Special layer
             }
         } else {
-            if(record->tap.count && !record->tap.interrupted) {
+            if(record->tap.count && !record->tap.interrupted && (!spec_shift)) {
                 unregister_code(KC_GRV);
             } else {
-                layer_off(SPEC);
+                if(--spec_shift < 0) spec_shift = 0;
+                if(!spec_shift) layer_off(SPEC);
             }
         }
         break;
 
         case RSymb:
         if (record->event.pressed) {
-            if (record->tap.count && (!symb_shift) && (!symb_lock)) {
+            if (record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) {
                 register_code(KC_QUOT);
             } else {
                 if(++symb_shift > 2) symb_shift = 2;
-                if(symb_shift == 2)  {
-                    symb_lock = !symb_lock;
-                } else if(symb_shift == 1) {
-                    layer_on(SYMB);
-                }
+                if(spec_shift) symb_lock = !symb_lock;
+                layer_on(SYMB);
             }
         } else {
-            if(record->tap.count && symb_shift == 0) {
+            if(record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) {
                 unregister_code(KC_QUOT);
             } else {
                 if(--symb_shift < 0) symb_shift = 0;
@@ -329,18 +302,15 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
         case RMdia:
         if (record->event.pressed) {
-            if (record->tap.count && (!mdia_shift) && (!mdia_lock)) {
+            if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
                 register_code(KC_BSLS);
             } else {
                 if(++mdia_shift > 2) mdia_shift = 2;
-                if(mdia_shift == 2)  {
-                    mdia_lock = !mdia_lock;
-                } else if(mdia_shift == 1) {
-                    layer_on(MDIA);
-                }
+                if(spec_shift) mdia_lock = !mdia_lock;
+                layer_on(MDIA);
             }
         } else {
-            if(record->tap.count && (!mdia_shift) && (!mdia_lock)) {
+            if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
                 unregister_code(KC_BSLS);
             } else {
                 if(--mdia_shift < 0) mdia_shift = 0;
@@ -351,16 +321,20 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
         case RSpec:
         if (record->event.pressed) {
-            if (record->tap.count && !record->tap.interrupted) {
+            if(symb_shift) symb_lock = !symb_lock;
+            else if(mdia_shift) mdia_lock = !mdia_lock;
+            else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) {
                 register_code(KC_EQL);
             } else {
+                if(++spec_shift > 2) spec_shift = 2;
                 layer_on(SPEC);
             }
         } else {
-            if(record->tap.count && !record->tap.interrupted) {
+            if(record->tap.count && !record->tap.interrupted && (!spec_shift)) {
                 unregister_code(KC_EQL);
             } else {
-                layer_off(SPEC);
+                if(--spec_shift < 0) spec_shift = 0;
+                if(!spec_shift) layer_off(SPEC);
             }
         }
         break;
@@ -419,7 +393,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             // none
             break;
     }
-    
+
     return MACRO_NONE;
 };
 
@@ -431,7 +405,9 @@ void matrix_init_user(void) {
 // Runs constantly in the background, in a loop.
 void matrix_scan_user(void) {
     // shift or caps lock turns on red light
-    if(caps_shift || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) {
+    if((keyboard_report->mods & MOD_BIT(KC_LSFT))
+    || (keyboard_report->mods & MOD_BIT(KC_RSFT))
+    || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) {
         ergodox_right_led_1_on();
     } else {
         ergodox_right_led_1_off();
@@ -451,4 +427,3 @@ void matrix_scan_user(void) {
         ergodox_right_led_3_off();
     }
 };
-
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png
index 9c561a10aa..7f8c1b5c1f 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt
index 25731ea2e6..7763c3d37e 100644
--- a/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt
+++ b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt
@@ -1,24 +1,24 @@
 [{x:3.5},"#\n3",{x:10.5},"*\n8"],
 [{y:-0.875,x:2.5},"@\n2",{x:1},"$\n4",{x:8.5},"&\n7",{x:1},"(\n9"],
 [{y:-0.875,x:5.5},"%\n5",{c:"#ff4444"},"Esc",{x:4.5,c:"#cccccc"},"_\n\n\n\n\n\n-","^\n6"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n~\n\n\n\nShift\n`",{c:"#cccccc"},"!\n1",{x:14.5},")\n0",{c:"#2277ff",w:1.5},"+\n\nSpecial\n\n\n\n=\nShift"],
+[{y:-0.875,c:"#c6c600",w:1.5},"Special\n\n~\n\n\n\nShift\n`",{c:"#cccccc"},"!\n1",{x:14.5},")\n0",{c:"#c6c600",w:1.5},"+\n\nSpecial\n\n\n\n=\nShift"],
 [{y:-0.375,x:3.5,c:"#cccccc"},"E",{x:10.5},"I"],
 [{y:-0.875,x:2.5},"W",{x:1},"R",{x:8.5},"U",{x:1},"O"],
 [{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc"},"Q",{x:14.5},"P",{c:"#2277ff",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#cccccc"},"D",{x:10.5},"K"],
+[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Q",{x:14.5},"P",{c:"#c6c600",t:"#002299",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000"},"D",{x:10.5},"K"],
 [{y:-0.875,x:2.5},"S",{x:1},"F",{x:8.5},"J",{x:1},"L"],
 [{y:-0.875,x:5.5},"G",{x:6.5},"H"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc"},"A",{x:14.5},":\n;",{c:"#2277ff",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"],
-[{y:-0.625,x:6.5,c:"#54d6de",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"],
+[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A",{x:14.5},":\n;",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"],
+[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"],
 [{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"],
 [{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."],
 [{y:-0.875,x:5.5},"B",{x:6.5},"N"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc"},"Z",{x:14.5},"?\n/",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Z",{x:14.5},"?\n/",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"],
 [{y:-0.875,x:2.5},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5},"Cmd\n\n\nSuper",{x:1},"Hyper"],
 [{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Ctrl\n\n\nRCtrl"],
-[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Home","End"],
+[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Home","End"],
 [{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete","Page\n\n\n\n\n\nUp"],
 [{x:2},"Page\n\n\n\n\n\nDown"],
 [{r:-30,rx:13,y:-1,x:-3},"Left","Right"],
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png
index 99e5ed80b1..bb78b7c7a8 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt
index 4eccc9f350..e1467b22e1 100644
--- a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt
+++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt
@@ -1,27 +1,27 @@
 [{x:3.5,c:"#99de2a"},"F13",{x:10.5},"F18"],
 [{y:-0.875,x:2.5},"F12",{x:1},"F14",{x:8.5},"F17",{x:1},"F19"],
 [{y:-0.875,x:5.5},"F15",{c:"#ff4444"},"Esc",{x:4.5,c:"#737373",a:7},"",{c:"#99de2a",a:4},"F16"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"],
-[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#ffb063"},"Home",{x:1},"Page\n\n\n\n\n\nUp"],
-[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#e6e067"},"Print\n\n\n\n\n\nScreen"],
-[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#e6e067",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#ff0000",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#ff8500",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
+[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"],
+[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#1e8fff"},"Home",{x:1},"Page\n\n\n\n\n\nUp"],
+[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#1e8fff",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#9977ee"},"Print\n\n\n\n\n\nScreen"],
+[{y:-0.875,c:"#000000",t:"#3f68ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#3f68ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
 [{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nLeft",{x:1},"Mouse\n\n\n\n\n\nRight",{x:8.5},"Cursor\n\n\n\n\n\nLeft",{x:1},"Cursor\n\n\n\n\n\nRight"],
-[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#e6e067"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#2277ff",w:1.5},"\n\nSymbols\n\n\n\n\nShift"],
-[{y:-0.625,x:6.5,c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"],
-[{y:-0.75,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
-[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#ffb063"},"End",{x:1},"Page\n\n\n\n\n\nDown"],
-[{y:-0.875,x:5.5,c:"#e6e067"},"Mute",{x:6.5,c:"#737373",a:7},""],
-[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#ff8500"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#ffb063",fa:[0,0,0,1]},"Delete\n\n\nOption"],
-[{y:-0.875,x:2.5,c:"#ff8500"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#ffb063"},"Insert\n\n\nCmd",{x:1,c:"#77aaff"},"Hyper"],
+[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"],
+[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#c6c600",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"],
+[{y:-0.625,x:6.5,c:"#1e8fff",t:"#000000",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"],
+[{y:-0.75,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
+[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#1e8fff"},"End",{x:1},"Page\n\n\n\n\n\nDown"],
+[{y:-0.875,x:5.5,c:"#9977ee"},"Mute",{x:6.5,c:"#737373",a:7},""],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff",fa:[0,0,0,1]},"Delete\n\n\nOption"],
+[{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert\n\n\nCmd",{x:1,c:"#dddd77"},"Hyper"],
 [{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Crtl\n\n\nRCtrl"],
-[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ccbb00"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"],
+[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"],
 [{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"],
 [{x:2},"Home\n\n\nBrowser"],
 [{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"],
-[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ccbb00",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"],
-[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nDown"]
+[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#6633ee",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"],
+[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nDown"]
 
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png
index 6eecf447ee..399c5fc754 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt
index a08827c6de..6f9d8ef047 100644
--- a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt
+++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt
@@ -1,21 +1,21 @@
 [{x:3.5,a:7},"",{x:10.5},""],
-[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
-[{y:-0.875,x:5.5},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""],
+[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"_\n\n\n\n\n\n-"],
+[{y:-0.875,x:5.5,a:7},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""],
 [{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"],
 [{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
-[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
-[{y:-0.875,x:5.5},"",{h:1.5},"",{x:4.5,h:1.5},"",""],
-[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""],
-[{y:-0.375,x:3.5},"",{x:10.5},""],
+[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"{\n["],
+[{y:-0.875,x:5.5,a:7},"",{h:1.5},"",{x:4.5,h:1.5},"",""],
+[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
 [{y:-0.875,x:5.5},"",{x:6.5},""],
-[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""],
-[{y:-0.625,x:6.5,h:1.5},"",{x:4.5,h:1.5},""],
+[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"],
+[{y:-0.625,x:6.5,c:"#cccccc",a:7,h:1.5},"",{x:4.5,h:1.5},""],
 [{y:-0.75,x:3.5},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
 [{y:-0.875,x:5.5},"",{x:6.5},""],
-[{y:-0.875,w:1.5},"","",{x:14.5},"",{c:"#2277ff",w:1.5},"RShift"],
-[{y:-0.375,x:3.5,c:"#cccccc"},"",{x:10.5},""],
+[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
 [{y:-0.75,x:0.5},"","",{x:14.5},"",""],
 [{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""],
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png
index e4de64a96f..48cda5f6b6 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt
index e199f5c59f..5c5bc155aa 100644
--- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt
+++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt
@@ -1,24 +1,24 @@
 [{x:3.5,c:"#99de2a"},"F3",{x:10.5},"F8"],
 [{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"],
 [{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#bbddbb"},"_\n\n\n\n\n\n-",{c:"#99de2a"},"F6"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"],
+[{y:-0.875,c:"#dddd77",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#dddd77",w:1.5},"\n\nShift\n\n\n\n\nLock"],
 [{y:-0.375,x:3.5,c:"#bbddbb"},"{",{x:10.5,c:"#89b087"},"8"],
 [{y:-0.875,x:2.5,c:"#bbddbb"},"@",{x:1},"}",{x:8.5,c:"#89b087"},"7",{x:1},"9"],
 [{y:-0.875,x:5.5,c:"#bbddbb"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb"},"!",{x:14.5,c:"#89b087"},"/",{c:"#2277ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#bbddbb"},"(",{x:10.5,c:"#89b087"},"5"],
+[{y:-0.875,c:"#dddd77",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#dddd77",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"(",{x:10.5,c:"#89b087"},"5"],
 [{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"],
 [{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"],
-[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSymbols\n\n\n\n\nShift"],
-[{y:-0.625,x:6.5,c:"#54d6de",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"],
+[{y:-0.875,c:"#000000",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"],
+[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"],
 [{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"],
 [{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"],
 [{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"],
-[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb"},"%",{x:14.5,c:"#89b087"},"-",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},".\n\n\nOption"],
-[{y:-0.875,x:2.5,c:"#77aaff"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0\n\n\nCmd",{x:1},"=\n\n\nHyper"],
-[{y:-0.75,x:0.5,c:"#77aaff"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+\n\n\nMeh","Enter\n\n\nCtrl"],
-[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Left","Right"],
+[{y:-0.875,c:"#dddd77",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#dddd77",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#c6c600",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."],
+[{y:-0.875,x:2.5,c:"#c6c600"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="],
+[{y:-0.75,x:0.5,c:"#c6c600"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"],
+[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Left","Right"],
 [{h:2},"Space",{h:2},"Enter","Up"],
 [{x:2},"Down"],
 [{r:-30,rx:13,y:-1,x:-3},"Home","End"],
diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md
index 6465cd79e0..21d40477ca 100644
--- a/keyboards/ergodox/keymaps/ordinary/readme.md
+++ b/keyboards/ergodox/keymaps/ordinary/readme.md
@@ -69,7 +69,7 @@ Alas, the yellow keys have at best spotty success with common software. Good luc
 
 In addition to Symbols and Media there is the Capitals layer which is exactly the same as pressing the shift key. Each layer is accessed by a shift key on each edge of the keyboard and corresponds to one of the three LEDs on the keyboard: Capitals (red), Symbols (green), Media (blue). The color of a layer illuminates when the layer is active.
 
-Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. If you press both of a pair of shift keys, the layer will lock on until you press both shift keys again. For instance, the widely and rightly loathed Caps Lock is engaged by pressing both Capitals Shift buttons. All the Shift keys work this way.
+Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. Lock the shift keys using the Shift Lock button, which is the same as the Special Shift button. You can press the shift and shift-lock buttons in either order.
 
 Multiple layers can be turned on at once. The Capitals layer will affect characters on other layers to capitalize. Other layers, however, don't 'mix': Symbols blankets the base layout; Media blankets Symbols.
 
@@ -79,7 +79,7 @@ Multiple layers can be turned on at once. The Capitals layer will affect charact
 
 ### Escape ###
 
-The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, whnich is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape.
+The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape.
 
 The Ordinary layout offers as a consolation prize a Special sequence for Escape: Special Shift + 1. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers.
 
@@ -87,9 +87,9 @@ The Ordinary layout offers as a consolation prize a Special sequence for Escape:
 
 At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence, using the 0 key, to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times.
 
-### RShift ###
+### Other Characters ###
 
-The Ordinary Layout locks layers by pressing both of a pair of shift keys. This interferes with the QMK firmware magic sequence, which is LShift+RShift. To work around this, both of the Capitals Shift keys produce a *Left Shift* keystroke. If for some reason a person needs *Right Shift* they can find it by pressing a Special Shift key, then the Capitals Shift key on the right side of the keyboard.
+The Escape and Backspace special sequences are so useful why not have a few more? You can find dash under 9, left bracket under o, and right bracket under p. That's pretty much all the characters from the top right corner of the keyboard which moved to make room for the columnar layout.
 
 ****
 
-- 
cgit v1.2.3


From 911cc6832598ac9b637fdb11448354d418c197c4 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Sun, 14 Aug 2016 00:41:09 +0200
Subject: Added all original S60-X keymaps All keymaps that were included in
 VinnyCordeiro's repository were ported to QMK. Main Readme was copied over
 from VC's repo, slightly altered. Main Makefile was updated to reflect VC's
 original configuration. Small changes in felix keymap.

---
 keyboards/s60-x/Makefile                    |   2 +-
 keyboards/s60-x/keymaps/custom/keymap.c     |  28 ++++
 keyboards/s60-x/keymaps/custom/readme.md    |  15 ++
 keyboards/s60-x/keymaps/default/Makefile    |  21 ---
 keyboards/s60-x/keymaps/default/keymap.c    | 128 +++++---------
 keyboards/s60-x/keymaps/default/readme.md   |  28 +++-
 keyboards/s60-x/keymaps/felix/keymap.c      | 127 +++++++++++---
 keyboards/s60-x/keymaps/felix/readme.md     |  10 +-
 keyboards/s60-x/keymaps/hasu/keymap.c       | 182 ++++++++++++++++++++
 keyboards/s60-x/keymaps/hasu/readme.md      |   4 +
 keyboards/s60-x/keymaps/hhkb/keymap.c       |  52 ++++++
 keyboards/s60-x/keymaps/hhkb/readme.md      |  26 +++
 keyboards/s60-x/keymaps/iso/keymap.c        |  48 ++++++
 keyboards/s60-x/keymaps/iso/readme.md       |  28 ++++
 keyboards/s60-x/keymaps/jpec/keymap.c       |  92 +++++++++++
 keyboards/s60-x/keymaps/jpec/readme.md      |   1 +
 keyboards/s60-x/keymaps/plain/keymap.c      |  25 +++
 keyboards/s60-x/keymaps/plain/readme.md     |  16 ++
 keyboards/s60-x/keymaps/poker/keymap.c      | 180 ++++++++++++++++++++
 keyboards/s60-x/keymaps/poker/readme.md     |  31 ++++
 keyboards/s60-x/keymaps/poker_bit/keymap.c  | 110 ++++++++++++
 keyboards/s60-x/keymaps/poker_bit/readme.md |  31 ++++
 keyboards/s60-x/keymaps/poker_set/keymap.c  | 178 ++++++++++++++++++++
 keyboards/s60-x/keymaps/poker_set/readme.md |  31 ++++
 keyboards/s60-x/keymaps/spacefn/keymap.c    |  55 ++++++
 keyboards/s60-x/keymaps/spacefn/readme.md   |  27 +++
 keyboards/s60-x/readme.md                   | 248 ++++++++++++++++++++++++++--
 keyboards/s60-x/s60-x.h                     |   5 +
 28 files changed, 1579 insertions(+), 150 deletions(-)
 create mode 100644 keyboards/s60-x/keymaps/custom/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/custom/readme.md
 delete mode 100644 keyboards/s60-x/keymaps/default/Makefile
 create mode 100644 keyboards/s60-x/keymaps/hasu/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/hasu/readme.md
 create mode 100644 keyboards/s60-x/keymaps/hhkb/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/hhkb/readme.md
 create mode 100644 keyboards/s60-x/keymaps/iso/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/iso/readme.md
 create mode 100644 keyboards/s60-x/keymaps/jpec/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/jpec/readme.md
 create mode 100644 keyboards/s60-x/keymaps/plain/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/plain/readme.md
 create mode 100644 keyboards/s60-x/keymaps/poker/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/poker/readme.md
 create mode 100644 keyboards/s60-x/keymaps/poker_bit/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/poker_bit/readme.md
 create mode 100644 keyboards/s60-x/keymaps/poker_set/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/poker_set/readme.md
 create mode 100644 keyboards/s60-x/keymaps/spacefn/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/spacefn/readme.md

(limited to 'keyboards')

diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
index 57edd5e036..8b51d4609f 100644
--- a/keyboards/s60-x/Makefile
+++ b/keyboards/s60-x/Makefile
@@ -53,7 +53,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
 CONSOLE_ENABLE ?= yes        # Console for debug(+400)
diff --git a/keyboards/s60-x/keymaps/custom/keymap.c b/keyboards/s60-x/keymaps/custom/keymap.c
new file mode 100644
index 0000000000..59361241fa
--- /dev/null
+++ b/keyboards/s60-x/keymaps/custom/keymap.c
@@ -0,0 +1,28 @@
+#include "keymap_common.h"
+
+/* Main layer: Test layout, using all keys.
+
+      0     1     2     3     4     5     6     7     8     9     A     B     C     D     E
+   ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+ 0 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │PGUP │BKSPC│
+   ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ 1 │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+   ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ 2 │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │PGDN │ENTER│█████│
+   ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ 3 │LSHFT│HOME │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │ END │RSHFT│  UP │
+   ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ 4 │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│
+   └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    KEYMAP(GRV,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL, PGUP, BSPC, \
+           TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC, BSLS,       \
+          CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT, PGDN, ENT ,       \
+          LSFT, HOME,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,  END, RSFT,   UP, \
+          LCTL, LGUI, LALT,                    SPC,                   RALT, RGUI,  APP, RCTL),
+};
+const uint16_t PROGMEM fn_actions[] = {};
+
diff --git a/keyboards/s60-x/keymaps/custom/readme.md b/keyboards/s60-x/keymaps/custom/readme.md
new file mode 100644
index 0000000000..cf87bd915f
--- /dev/null
+++ b/keyboards/s60-x/keymaps/custom/readme.md
@@ -0,0 +1,15 @@
+### 8  Custom
+The custom keymap - [keymap_custom.c](keymap_custom.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
+
+#### 8.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │PgUp │BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │PgDwn│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│Home │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │ End │Shift│  Up │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/default/Makefile b/keyboards/s60-x/keymaps/default/Makefile
deleted file mode 100644
index f4671a9d11..0000000000
--- a/keyboards/s60-x/keymaps/default/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
index 3b680c3072..be7a71aff0 100644
--- a/keyboards/s60-x/keymaps/default/keymap.c
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -1,92 +1,48 @@
-/*
-Copyright 2016 Julien Pecqueur <julien@peclu.net>
-Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#include "keymap_common.h"
+
+/* 0: Main layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
 
-#include "s60-x.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	/* Layout 0: Default Layer
-	* ,-----------------------------------------------------------.
-	* |`  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-	* |-----------------------------------------------------------|
-	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-	* |-----------------------------------------------------------|
-	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-	* |-----------------------------------------------------------|
-	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-	* |-----------------------------------------------------------|
-	* |Fn1 |Gui |Alt |        SpaceFn         |Alt |Gui |App |Ctrl|
-	* `-----------------------------------------------------------'
-	*/
-	KEYMAP(
-		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS,  EQL, BSPC, BSPC, \
-		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
-		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN,    QUOT, NUHS, ENT,  \
-		LSFT, NUBS, Z,    X,    C,    V,    B,    N,    M, COMM,  DOT,    SLSH,   NO, RSFT, NO, \
-		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
-
-	/* Layout 1: Function Layer
-	* ,-----------------------------------------------------------.
-	* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-	* |-----------------------------------------------------------|
-	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
-	* |-----------------------------------------------------------|
-	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
-	* |-----------------------------------------------------------|
-	* |        |Prt|Cut|Cop|Pst|Cal|   |   |   |   |   |CapsLock  |
-	* |-----------------------------------------------------------|
-	* |    |    |    |                        |    |    |    |    |
-	* `-----------------------------------------------------------'
-	*/
-	KEYMAP(
-		ESC,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,  TRNS, DEL,  \
-		TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP,   PGDN, TRNS, SLCK, PAUS, INS,  \
-		TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END,  TRNS, TRNS, PENT, \
-		TRNS, TRNS, PSCR, FN2,  FN3,  FN4,  CALC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, \
-		TRNS, TRNS, TRNS,             TRNS,                         TRNS, TRNS, TRNS, TRNS),
-};
-
-/*
-* Fn action definition
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    KEYMAP(ESC,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL,   NO, BSPC, \
+           TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC, BSLS,       \
+          CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT,   NO, ENT ,       \
+          LSFT,   NO,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+          LCTL, LGUI, LALT,                    SPC,                   RALT,  FN0,  APP, RCTL),
+
+/* 1: Fn layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
-const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),    /* SpaceFn layout 1 */
-	[1] = ACTION_LAYER_MOMENTARY(1),            /* Momentary layout 1 */
-	[2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL),    /* Cut  */
-	[3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS),    /* Copy  */
-	[4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS),    /* Paste */
+    KEYMAP(
+         GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS, TRNS,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    return MACRO_NONE;
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
 };
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/readme.md b/keyboards/s60-x/keymaps/default/readme.md
index 73318dad72..01cda9df9b 100644
--- a/keyboards/s60-x/keymaps/default/readme.md
+++ b/keyboards/s60-x/keymaps/default/readme.md
@@ -1 +1,27 @@
-# The default keymap for s60-x
\ No newline at end of file
+### 1  Standard - ANSI
+The standard keymap is the one that is pre-flashed on the S60-X.
+
+#### 1.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 1.1 Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
index 7fc0e021c9..9c620527b0 100644
--- a/keyboards/s60-x/keymaps/felix/keymap.c
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -16,26 +16,52 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "s60-x.h"
 
+//make keymap a little easier to read
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+enum layer_names {
+	DEFAULT,
+	GAMING,
+	FUNCTION
+};
+
+enum languages {
+	GERMAN
+};
+
+#define LANGUAGE GERMAN
+
+enum custom_keycodes {
+	KC_C_AM = SAFE_RANGE,
+	KC_C_EM,
+	KC_C_IM,
+	KC_C_OM,
+	KC_C_UM,
+	KC_C_SM,
+	KC_C_YM,
+	KC_C_WM
+};
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/* Layout 0: Default Layer
-	* RSFT will be replaced once a better way to control magic is found.
 	* ,-----------------------------------------------------------.
 	* |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
 	* |-----------------------------------------------------------|
-	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|BckSp|
+	* |Tab  |  Q|  W|  E|  R|  T|  Z|  U|  I|  O|  P|  [|  ]|BckSp|
 	* |-----------------------------------------------------------|
 	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
 	* |-----------------------------------------------------------|
-	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
+	* |Shift   |  Y|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
 	* |-----------------------------------------------------------|
-	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
+	* |Fn2 |Gui |Alt |         SpaceFn       |Alt |Left|Down|Right|
 	* `-----------------------------------------------------------'
 	*/
-	KEYMAP(
+	[DEFAULT] = KEYMAP(
 		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  \
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Z,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
 		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           \
-		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
+		KC_LSFT, KC_NUBS, KC_Y,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
 		KC_FN2,  KC_LGUI, KC_LALT,                            KC_FN0,                                      KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	/* Layout 1: Gaming Layer, SpaceFn disabled
@@ -51,32 +77,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |   | NOP|     |          Space         |    |    |    |    |
 	* `-----------------------------------------------------------'
 	*/
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN1,  \
-		KC_TRNS, KC_NO,   KC_TRNS,                            KC_SPC,                                      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+	[GAMING] = KEYMAP(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_FN1,  \
+		_______, XXXXXXX,   _______,                            KC_SPC,                                    _______, _______, _______, _______),
 
 	/* Layout 2: Function Layer
 	* ,-----------------------------------------------------------.
-	* |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |RES|
+	* |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|RES|
 	* |-----------------------------------------------------------|
-	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |     |   |   |   |Prv|Ply|Nxt| � |   | � |   |Prt|Slk|Pau  |
 	* |-----------------------------------------------------------|
-	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |      | � | � |   |Vl-|Mut|Vl+|   |   |   |   |   |PEnt    |
 	* |-----------------------------------------------------------|
-	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Fn1 |
+	* |        |   |   |   |   |Cal|   |   |   |   |Pau |PUp |Fn1 |
 	* |-----------------------------------------------------------|
 	* |    |    |    |                        |    |Home|PDn |End |
 	* `-----------------------------------------------------------'
 	*/
-	KEYMAP(
-		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DEBUG,   RESET,   \
-		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
-		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
-		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_FN1,  \
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+	[FUNCTION] = KEYMAP(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,   RESET,   \
+		_______, _______, KC_C_WM, KC_C_EM, KC_MPRV, KC_MPLY, KC_MNXT, KC_C_UM, KC_C_IM, KC_C_OM, _______, KC_PSCR, KC_SLCK, KC_PAUS, \
+		_______, KC_C_AM, KC_C_SM, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_PENT,          \
+		_______, KC_C_YM, _______, _______, _______, _______, KC_CALC, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_FN1, \
+		_______, _______, _______,                            _______,                                     _______, KC_HOME, KC_PGDN, KC_END),
 };
 
 /*
@@ -102,8 +128,61 @@ void matrix_scan_user(void) {
 
 }
 
+bool process_german(uint16_t keycode, keyrecord_t *record) {
+	uint16_t send_code = 0;
+	switch (keycode) {
+	case KC_C_AM:
+		if (record->event.pressed) {
+			send_code = KC_Q;
+		}
+		break;
+
+	case KC_C_OM:
+		if (record->event.pressed) {
+			send_code = KC_P;
+		}
+		break;
+
+	case KC_C_UM:
+		if (record->event.pressed) {
+			send_code = KC_Y;
+		}
+		break;
+
+	case KC_C_SM:
+		if (record->event.pressed) {
+			send_code = KC_S;
+		}
+		break;
+	}
+
+	if (send_code == 0) {
+		return true;
+	}
+	else {
+		register_code(KC_RALT);
+		register_code(send_code);
+		unregister_code(send_code);
+		unregister_code(KC_RALT);
+		return false;
+	}
+}
+
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
+	if (keycode == KC_QUOT) {
+		if (record->event.pressed) {
+			register_code(KC_QUOT);
+			unregister_code(KC_QUOT);
+			register_code(KC_SPACE);
+			unregister_code(KC_SPACE);
+		}
+		return false;
+	}
+#if LANGUAGE == GERMAN
+	return process_german(keycode, record);
+#else
+	return true;
+#endif
 }
 
 void led_set_user(uint8_t usb_led) {
diff --git a/keyboards/s60-x/keymaps/felix/readme.md b/keyboards/s60-x/keymaps/felix/readme.md
index 73318dad72..7f083dfd08 100644
--- a/keyboards/s60-x/keymaps/felix/readme.md
+++ b/keyboards/s60-x/keymaps/felix/readme.md
@@ -1 +1,9 @@
-# The default keymap for s60-x
\ No newline at end of file
+# A non-US ANSI QWERTZ keymap
+
+This keymap was specifically designed to support ANSI keycaps while retaining the possibility of inputting characters with diacritics that are normally not used in the english language.
+
+It relies on the US-International keyboard layout, which can be installed in any current operating system without the use of third party hardware.
+
+Currently, it explicitly supports the following languages, though other languages are readily useable using the AltGr modifier.
+- German
+
diff --git a/keyboards/s60-x/keymaps/hasu/keymap.c b/keyboards/s60-x/keymaps/hasu/keymap.c
new file mode 100644
index 0000000000..46ea81fea2
--- /dev/null
+++ b/keyboards/s60-x/keymaps/hasu/keymap.c
@@ -0,0 +1,182 @@
+#include "keymap_common.h"
+
+/*
+ * Hasu
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap 0: Default Layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │ Fn2 │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │ Fn1 │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ Fn3 │ Fn3 │ Fn0 │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    KEYMAP(
+         ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
+         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
+        CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L,  FN2, QUOT,   NO,  ENT,       \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT,  FN1,   NO,  FN9,   NO, \
+        LCTL, LGUI, LALT,                SPC,                 RALT,  FN3,  FN3,  FN0),
+    /* Keymap 1: colemak
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  F  │  P  │  G  │  J  │  L  │  U  │  Y  │  ;  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│BKSPC│  A  │  R  │  S  │  T  │  D  │  H  │  N  │  E  │  I  │  O  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  K  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ Fn0 │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS, EQL,   NO, BSPC, \
+         TAB,    Q,    W,   F,   P,   G,   J,   L,   U,    Y, SCLN, LBRC, RBRC, BSLS,      \
+        BSPC,    A,    R,   S,   T,   D,   H,   N,   E,    I,    O, QUOT,   NO,  ENT,      \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   K,   M, COMM,  DOT, SLSH,   NO, RSFT,  NO, \
+        LCTL, LGUI, LALT,                SPC,                 RALT, RGUI,  APP,  FN0),
+    /* Keymap 2: dvorak
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  [  │  ]  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  '  │  ,  │  .  │  P  │  Y  │  F  │  G  │  C  │  R  │  L  │  /  │  =  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  O  │  E  │  U  │  I  │  D  │  H  │  T  │  N  │  S  │  -  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  ;  │  Q  │  J  │  K  │  X  │  B  │  M  │  W  │  V  │  Z  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ FN0 │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘   
+    */
+    KEYMAP(
+         GRV,    1,    2,    3,   4,   5,   6,   7,   8,   9,   0, LBRC, RBRC,   NO, BSPC, \
+         TAB, QUOT, COMM,  DOT,   P,   Y,   F,   G,   C,   R,   L, SLSH,  EQL, BSLS,       \
+        CAPS,    A,    O,    E,   U,   I,   D,   H,   T,   N,   S, MINS,   NO,  ENT,       \
+        LSFT,   NO, SCLN,    Q,   J,   K,   X,   B,   M,   W,   V,    Z,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                 SPC,               RALT, RGUI,  APP,  FN0),
+    /* Keymap 3: workman
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  D  │  E  │  W  │  B  │  J  │  F  │  U  │  P  │  ;  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│BKSPC│  A  │  S  │  H  │  T  │  G  │  Y  │  N  │  E  │  O  │  I  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  M  │  C  │  V  │  K  │  L  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ FN0 │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
+         TAB,    Q,    D,   R,   W,   B,   J,   F,   U,    P, SCLN, LBRC, RBRC, BSLS,       \
+        BSPC,    A,    S,   H,   T,   G,   Y,   N,   E,    O,    I, QUOT,   NO,  ENT,       \
+        LSFT,   NO,    Z,   X,   M,   C,   V,   K,   L, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                SPC,                 RALT, RGUI,  APP,  FN0),
+    /* Overlay 4: HHKB mode
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│Grave│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Caps │     │     │     │     │     │     │     │ Psc │ Slk │Pause│ Up  │     │ Ins │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│ VoD │ VoU │Mute │     │     │NP_* │NP_/ │Home │PgUp │Left │Right│▒▒▒▒▒│Enter│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│     │     │     │     │     │NP_+ │NP_- │ End │PgDwn│Down │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│Space│█████│█████│█████│R_ALT│R_GUI│ App │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    KEYMAP(
+         GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS,  DEL, \
+        CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS,   UP, TRNS,  INS,       \
+        LCTL, VOLD, VOLU, MUTE, TRNS, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT, TRNS,  ENT,       \
+        LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS,  END, PGDN, DOWN, TRNS, RSFT, TRNS, \
+        LCTL, LGUI, LALT,                    SPC,                   RALT, RGUI,  FN4, TRNS),
+    /* Overlay 5: Vi mode (Slash)
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│Grave│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│BkSpc│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ Tab │Home │PgDwn│ Up  │PgUp │ End │Home │PgDwn│PgUp │ End │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│     │Left │Down │Right│     │Left │Down │ Up  │Right│     │     │▒▒▒▒▒│Enter│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│     │     │     │     │     │Home │PgDwn│PgUp │ End │     │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│Space│█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    KEYMAP(
+         GRV, F1,     F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, BSPC, \
+         TAB, HOME, PGDN,   UP, PGUP,  END, HOME, PGDN, PGUP,  END, TRNS, TRNS, TRNS, TRNS,       \
+        LCTL, TRNS, LEFT, DOWN, RGHT, TRNS, LEFT, DOWN,   UP, RGHT, TRNS, TRNS, TRNS,  ENT,       \
+        LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP,  END, TRNS, TRNS, RSFT, TRNS, \
+        LCTL, LGUI, LALT,                    SPC,                   RALT, RGUI,  APP, RCTL),
+    /* Overlay 6: Mouse mode (Semicolon/App)
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│Grave│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│BkSpc│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ Tab │     │     │     │     │     │ MwL │ MwD │ MwU │ MwR │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│     │ Ac0 │ Ac1 │ Ac2 │     │ McL │ McD │ McU │ McR │     │     │▒▒▒▒▒│Enter│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSFHT│▒▒▒▒▒│     │     │     │     │ Mb3 │ Mb2 │ Mb1 │ Mb4 │ Mb5 │     │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│ Mb1 │█████│█████│█████│     │     │     │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    KEYMAP(
+         GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, BSPC, \
+         TAB, TRNS, TRNS, TRNS, TRNS, TRNS, WH_L, WH_D, WH_U, WH_R, TRNS, TRNS, TRNS, TRNS,       \
+        LCTL, TRNS, ACL0, ACL1, ACL2, TRNS, MS_L, MS_D, MS_U, MS_R, TRNS, TRNS, TRNS,  ENT,       \
+        LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, BTN3, BTN2, BTN1, BTN4, BTN5, TRNS, TRNS, RSFT, TRNS, \
+        LCTL, LGUI, LALT,                   BTN1,                   TRNS, TRNS, TRNS, RCTL),
+    /* Overlay 7: Layout selector
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Lq  │ Lc  │ Ld  │ Lw  │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ Lq  │ Lw  │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │ Ld  │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │ Lc  │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+Lq: set Qwerty layout
+Lc: set Colemak layout
+Ld: set Dvorak layout
+Lw: set Workman layout
+
+    */
+    KEYMAP(
+         FN5,  FN6,  FN7,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS,  FN5,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS,  FN7, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS,  FN6, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(4),
+    [1] = ACTION_LAYER_TAP_KEY(5, KC_SLASH),
+    [2] = ACTION_LAYER_TAP_KEY(6, KC_SCLN),
+    [3] = ACTION_LAYER_MOMENTARY(6),
+    [4] = ACTION_LAYER_MOMENTARY(7),   // to Layout selector
+    [5] = ACTION_DEFAULT_LAYER_SET(0),  // set qwerty layout
+    [6] = ACTION_DEFAULT_LAYER_SET(1),  // set colemak layout
+    [7] = ACTION_DEFAULT_LAYER_SET(2),  // set dvorak layout
+    [8] = ACTION_DEFAULT_LAYER_SET(3),  // set workman layout
+    [9] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRV),
+};
diff --git a/keyboards/s60-x/keymaps/hasu/readme.md b/keyboards/s60-x/keymaps/hasu/readme.md
new file mode 100644
index 0000000000..64969b616d
--- /dev/null
+++ b/keyboards/s60-x/keymaps/hasu/readme.md
@@ -0,0 +1,4 @@
+### 5. Hasu
+This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
+
+(Hasu is the initial creator of the TMK firmware, in case you weren't aware.)
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/hhkb/keymap.c b/keyboards/s60-x/keymaps/hhkb/keymap.c
new file mode 100644
index 0000000000..a6e5b3279a
--- /dev/null
+++ b/keyboards/s60-x/keymaps/hhkb/keymap.c
@@ -0,0 +1,52 @@
+#include "keymap_common.h"
+
+/*
+ * HHKB Layout
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: Default layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │BkSpc│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Ctrl │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │ Fn3 │  '  │▒▒▒▒▒│Enter│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│ Fn  │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    KEYMAP(
+         ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL, BSLS, GRV, \
+         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSPC,      \
+        LCTL,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,      \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT, FN0, \
+          NO, LGUI, LALT,                SPC,                   NO, RALT, RGUI,   NO),
+    /* 1: HHKB Fn layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Pwr │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │ Ins │ Del │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Caps │     │     │     │     │     │     │     │ Psc │ Slk │ Pus │ Up  │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ VoD │ VoU │ Mut │ Ejc │     │NP_* │NP_/ │Home │PgUp │Left │Right│▒▒▒▒▒│NPEnt│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │NP_+ │NP_- │ End │PgDwn│Down │▒▒▒▒▒│     │     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│▒▒▒▒▒│     │     │█████│█████│█████│     │█████│█████│█████│▒▒▒▒▒│     │     │▒▒▒▒▒│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    KEYMAP(
+	 PWR,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12,  INS,  DEL, \
+	CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS,   UP, TRNS, TRNS,       \
+	TRNS, VOLD, VOLU, MUTE, EJCT, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT,   NO, PENT,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS,  END, PGDN, DOWN,   NO, TRNS, TRNS, \
+	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+};
diff --git a/keyboards/s60-x/keymaps/hhkb/readme.md b/keyboards/s60-x/keymaps/hhkb/readme.md
new file mode 100644
index 0000000000..2bceb26dd5
--- /dev/null
+++ b/keyboards/s60-x/keymaps/hhkb/readme.md
@@ -0,0 +1,26 @@
+### 7. HHKB
+[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
+#### 7.0: Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │BkSpc│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │ Fn3 │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│ Fn  │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 7.1: HHKB Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Pwr │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │ Ins │ Del │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │     │     │     │     │     │     │     │ Psc │ Slk │ Pus │ Up  │     │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │ VoD │ VoU │ Mut │ Ejc │     │  *  │  /  │Home │PgUp │Left │Right│▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│     │     │     │     │     │  +  │  -  │ End │PgDwn│Down │▒▒▒▒▒│     │     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │▒▒▒▒▒│     │     │█████│█████│█████│     │█████│█████│█████│▒▒▒▒▒│     │     │▒▒▒▒▒│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/iso/keymap.c b/keyboards/s60-x/keymaps/iso/keymap.c
new file mode 100644
index 0000000000..ad597cd7d4
--- /dev/null
+++ b/keyboards/s60-x/keymaps/iso/keymap.c
@@ -0,0 +1,48 @@
+#include "keymap_common.h"
+
+/* 0: Main layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │▒▒▒▒▒│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │NUHS │ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│  \  │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    KEYMAP(ESC,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL,   NO, BSPC, \
+           TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC,   NO,       \
+          CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT, NUHS, ENT ,       \
+          LSFT, BSLS,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+          LCTL, LGUI, LALT,                    SPC,                   RALT,  FN0,  APP, RCTL),
+	  
+/* 1: Fn layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+    KEYMAP(
+         GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS, TRNS,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
diff --git a/keyboards/s60-x/keymaps/iso/readme.md b/keyboards/s60-x/keymaps/iso/readme.md
new file mode 100644
index 0000000000..2c06bf86f0
--- /dev/null
+++ b/keyboards/s60-x/keymaps/iso/readme.md
@@ -0,0 +1,28 @@
+### 2  Standard - ISO
+The same as the standard keymap, but with additional ISO keys.
+
+
+#### 2.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │▒▒▒▒▒│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │NUHS │ENTER│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LSHFT│  \  │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 2.1 Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │     │     │     │     │     │     │     │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/jpec/keymap.c b/keyboards/s60-x/keymaps/jpec/keymap.c
new file mode 100644
index 0000000000..3b680c3072
--- /dev/null
+++ b/keyboards/s60-x/keymaps/jpec/keymap.c
@@ -0,0 +1,92 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layout 0: Default Layer
+	* ,-----------------------------------------------------------.
+	* |`  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+	* |-----------------------------------------------------------|
+	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+	* |-----------------------------------------------------------|
+	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+	* |-----------------------------------------------------------|
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+	* |-----------------------------------------------------------|
+	* |Fn1 |Gui |Alt |        SpaceFn         |Alt |Gui |App |Ctrl|
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS,  EQL, BSPC, BSPC, \
+		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
+		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN,    QUOT, NUHS, ENT,  \
+		LSFT, NUBS, Z,    X,    C,    V,    B,    N,    M, COMM,  DOT,    SLSH,   NO, RSFT, NO, \
+		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
+
+	/* Layout 1: Function Layer
+	* ,-----------------------------------------------------------.
+	* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+	* |-----------------------------------------------------------|
+	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |-----------------------------------------------------------|
+	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |-----------------------------------------------------------|
+	* |        |Prt|Cut|Cop|Pst|Cal|   |   |   |   |   |CapsLock  |
+	* |-----------------------------------------------------------|
+	* |    |    |    |                        |    |    |    |    |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		ESC,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,  TRNS, DEL,  \
+		TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP,   PGDN, TRNS, SLCK, PAUS, INS,  \
+		TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END,  TRNS, TRNS, PENT, \
+		TRNS, TRNS, PSCR, FN2,  FN3,  FN4,  CALC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, \
+		TRNS, TRNS, TRNS,             TRNS,                         TRNS, TRNS, TRNS, TRNS),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),    /* SpaceFn layout 1 */
+	[1] = ACTION_LAYER_MOMENTARY(1),            /* Momentary layout 1 */
+	[2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL),    /* Cut  */
+	[3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS),    /* Copy  */
+	[4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS),    /* Paste */
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/jpec/readme.md b/keyboards/s60-x/keymaps/jpec/readme.md
new file mode 100644
index 0000000000..73318dad72
--- /dev/null
+++ b/keyboards/s60-x/keymaps/jpec/readme.md
@@ -0,0 +1 @@
+# The default keymap for s60-x
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/plain/keymap.c b/keyboards/s60-x/keymaps/plain/keymap.c
new file mode 100644
index 0000000000..0f0cdee2a4
--- /dev/null
+++ b/keyboards/s60-x/keymaps/plain/keymap.c
@@ -0,0 +1,25 @@
+#include "keymap_common.h"
+
+/* Main layer:
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty */
+    KEYMAP(ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS, EQL,    NO, BSPC, \
+           TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
+          CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT, NO,   ENT,        \
+          LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH, NO,   RSFT,   NO, \
+          LCTL, LGUI, LALT,                SPC,                 RALT, RGUI, APP,  RCTL),
+};
+const uint16_t PROGMEM fn_actions[] = {};
diff --git a/keyboards/s60-x/keymaps/plain/readme.md b/keyboards/s60-x/keymaps/plain/readme.md
new file mode 100644
index 0000000000..ab13323e3b
--- /dev/null
+++ b/keyboards/s60-x/keymaps/plain/readme.md
@@ -0,0 +1,16 @@
+### 4. Plain
+Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
+See [keymap_plain.c](keymap_plain.c) for detail.
+
+#### 4.0 Plain Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/poker/keymap.c b/keyboards/s60-x/keymaps/poker/keymap.c
new file mode 100644
index 0000000000..5fc970a040
--- /dev/null
+++ b/keyboards/s60-x/keymaps/poker/keymap.c
@@ -0,0 +1,180 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
+         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
+        CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+    /* 1: colemak
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  F  │  P  │  G  │  J  │  L  │  U  │  Y  │  ;  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│BKSPC│  A  │  R  │  S  │  T  │  D  │  H  │  N  │  E  │  I  │  O  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  K  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS, EQL,   NO, BSPC, \
+         TAB,    Q,    W,   F,   P,   G,   J,   L,   U,    Y, SCLN, LBRC, RBRC, BSLS,      \
+        BSPC,    A,    R,   S,   T,   D,   H,   N,   E,    I,    O, QUOT,   NO,  ENT,      \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   K,   M, COMM,  DOT, SLSH,   NO, RSFT,  NO, \
+        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+    /* 2: dvorak
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  [  │  ]  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  '  │  ,  │  .  │  P  │  Y  │  F  │  G  │  C  │  R  │  L  │  /  │  =  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  O  │  E  │  U  │  I  │  D  │  H  │  T  │  N  │  S  │  -  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  ;  │  Q  │  J  │  K  │  X  │  B  │  M  │  W  │  V  │  Z  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘   
+    */
+    KEYMAP(
+         GRV,    1,    2,    3,   4,   5,   6,   7,   8,   9,   0, LBRC, RBRC,   NO, BSPC, \
+         TAB, QUOT, COMM,  DOT,   P,   Y,   F,   G,   C,   R,   L, SLSH,  EQL, BSLS,       \
+        CAPS,    A,    O,    E,   U,   I,   D,   H,   T,   N,   S, MINS,   NO,  ENT,       \
+        LSFT,   NO, SCLN,    Q,   J,   K,   X,   B,   M,   W,   V,    Z,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                 SPC,                FN0, RGUI,  APP, RCTL),
+    /* 3: workman 
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  D  │  E  │  W  │  B  │  J  │  F  │  U  │  P  │  ;  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│BKSPC│  A  │  S  │  H  │  T  │  G  │  Y  │  N  │  E  │  O  │  I  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  M  │  C  │  V  │  K  │  L  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
+         TAB,    Q,    D,   R,   W,   B,   J,   F,   U,    P, SCLN, LBRC, RBRC, BSLS,       \
+        BSPC,    A,    S,   H,   T,   G,   Y,   N,   E,    O,    I, QUOT,   NO,  ENT,       \
+        LSFT,   NO,    Z,   X,   M,   C,   V,   K,   L, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+    /* 4: Poker with Arrow
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│     │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │Left │Down │Right│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,   UP, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, LEFT, DOWN, RGHT),
+    /* 5: Poker with Esc
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+    /* 6: Poker Fn
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ FnQ │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │ FnL │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Tsk │ End │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│ FnS │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+Fn:  to Fn overlay
+FnL: to Layout selector overaly
+FnQ: toggle Esc overlay
+FnS: toggle Arrow overlay
+
+    */
+    KEYMAP(
+         ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS,  FN2,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS,  FN4,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN3,  END, TRNS, TRNS,       \
+        TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                    FN1,                   TRNS, TRNS, TRNS, TRNS),
+    /* 7: Layout selector
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Lq  │ Lc  │ Ld  │ Lw  │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ Lq  │ Lw  │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │ Ld  │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │ Lc  │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+Lq: set Qwerty layout
+Lc: set Colemak layout
+Ld: set Dvorak layout
+Lw: set Workman layout
+
+    */
+    KEYMAP(
+         FN5,  FN6,  FN7,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS,  FN5,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS,  FN7, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS,  FN6, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    /* Poker Layout */
+    [0] = ACTION_LAYER_MOMENTARY(6),  // to Fn overlay
+    [1] = ACTION_LAYER_TOGGLE(4),     // toggle arrow overlay
+    [2] = ACTION_LAYER_TOGGLE(5),     // toggle Esc overlay
+    [3] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // Task(RControl,RShift+Esc)
+    [4] = ACTION_LAYER_MOMENTARY(7),  // to Layout selector
+    [5] = ACTION_DEFAULT_LAYER_SET(0),  // set qwerty layout
+    [6] = ACTION_DEFAULT_LAYER_SET(1),  // set colemak layout
+    [7] = ACTION_DEFAULT_LAYER_SET(2),  // set dvorak layout
+    [8] = ACTION_DEFAULT_LAYER_SET(3),  // set workman layout
+};
diff --git a/keyboards/s60-x/keymaps/poker/readme.md b/keyboards/s60-x/keymaps/poker/readme.md
new file mode 100644
index 0000000000..0d8be9d0f8
--- /dev/null
+++ b/keyboards/s60-x/keymaps/poker/readme.md
@@ -0,0 +1,31 @@
+### 3  Poker
+[keymap_poker.c](keymap_poker.c) emulates original Poker layers
+while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+
+    Fn + Esc = `
+    Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
+
+#### 3.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn  │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 3.1 Poker Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │ FnQ │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Tsk │ End │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│ FnS │█████│█████│█████│ Fn  │Left │Down │Right│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/poker_bit/keymap.c b/keyboards/s60-x/keymaps/poker_bit/keymap.c
new file mode 100644
index 0000000000..4a4cfd1be8
--- /dev/null
+++ b/keyboards/s60-x/keymaps/poker_bit/keymap.c
@@ -0,0 +1,110 @@
+#include "keymap_common.h"
+
+// Poker fix with toggle and bit operation
+// Fn + Esc = `
+// Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
+         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
+        LCTL,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+    /* 4: Poker Default + Fn'd 
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Caps │ Fn2 │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Fn4 │ End │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│ Fn1 │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    [4] = KEYMAP(
+        TRNS,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        CAPS,  FN2,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN4,  END, TRNS, TRNS,       \
+        TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                    FN1,                   TRNS, TRNS, TRNS, TRNS),
+    /* 5: Poker with Arrow
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│     │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│PgUp │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn3 │Home │PgDwn│ End │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                    FN3, HOME, PGDN,  END),
+    /* 6: Poker with Esc
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+    /* 7: Poker with Arrow + Fn'd
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│     │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │Left │Down │Right│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,   UP, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, LEFT, DOWN, RGHT),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    /* Poker Layout */
+    [0] = ACTION_LAYER_BIT_XOR(1, 0b0101, ON_BOTH),   // Poker Fn(with fix for Esc)
+    [1] = ACTION_LAYER_TOGGLE(5),                     // Poker Arrow toggle
+    [2] = ACTION_LAYER_TOGGLE(6),                     // Poker Esc toggle
+    [3] = ACTION_LAYER_BIT_XOR(1, 0b1101, ON_BOTH),   // Poker Fn(with fix for Arrow)
+    [4] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // FN3 Task(RControl,RShift+Esc)
+};
diff --git a/keyboards/s60-x/keymaps/poker_bit/readme.md b/keyboards/s60-x/keymaps/poker_bit/readme.md
new file mode 100644
index 0000000000..0d8be9d0f8
--- /dev/null
+++ b/keyboards/s60-x/keymaps/poker_bit/readme.md
@@ -0,0 +1,31 @@
+### 3  Poker
+[keymap_poker.c](keymap_poker.c) emulates original Poker layers
+while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+
+    Fn + Esc = `
+    Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
+
+#### 3.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn  │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 3.1 Poker Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │ FnQ │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Tsk │ End │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│ FnS │█████│█████│█████│ Fn  │Left │Down │Right│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/poker_set/keymap.c b/keyboards/s60-x/keymaps/poker_set/keymap.c
new file mode 100644
index 0000000000..0c1ef1a9b9
--- /dev/null
+++ b/keyboards/s60-x/keymaps/poker_set/keymap.c
@@ -0,0 +1,178 @@
+#include "keymap_common.h"
+
+// Poker fix with set(state transition)
+// Fn + Esc = `
+// Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
+         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
+        LCTL,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+    /* 1: Poker with Arrow
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│     │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn1 │Left │Down │Right│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,   UP, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                    FN1, LEFT, DOWN, RGHT),
+    /* 2: Poker with Esc
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn2 │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS,                   TRNS,                    FN2, TRNS, TRNS, TRNS),
+    /* 3: Poker with Arrow and Esc
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn3 │Left │Down │Right│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,   UP, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                    FN3, LEFT, DOWN, RGHT),
+    /* 4: Poker Fn'd
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ Fn6 │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Fn8 │ End │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│ Fn5 │█████│█████│█████│ Fn4 │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS,  FN6,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
+        TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                    FN5,                    FN4, TRNS, TRNS, TRNS),
+    /* 5: Poker Fn'd arrow
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ Fn7 │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Fn8 │ End │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│PgUp │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│ Fn4 │█████│█████│█████│ Fn5 │Home │PgDwn│ End │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS,  FN7,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
+        TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, PGUP, TRNS, \
+        TRNS, TRNS, TRNS,                    FN4,                    FN5, HOME, PGDN,  END),
+    /* 6: Poker Fn'd Esc
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│Grave│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ Fn4 │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Fn8 │ End │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│ Fn7 │█████│█████│█████│ Fn6 │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS,  FN4,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
+        TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                    FN7,                    FN6, TRNS, TRNS, TRNS),
+    /* 7: Poker Fn'd Arrow + Esc
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│Grave│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ Fn5 │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Fn8 │ End │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│PgUp │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│ Fn6 │█████│█████│█████│ Fn7 │Home │PgDwn│ End │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+    */
+    KEYMAP(
+         GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS,  FN5,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
+        TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, PGUP, TRNS, \
+        TRNS, TRNS, TRNS,                    FN6,                    FN7, HOME, PGDN,  END),
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    /* Poker Layout */
+    [0] = ACTION_LAYER_SET(4, ON_PRESS),     // FN0 move to Fn'd             when press
+    [1] = ACTION_LAYER_SET(5, ON_PRESS),     // FN1 move to Fn'd arrow       when press
+    [2] = ACTION_LAYER_SET(6, ON_PRESS),     // FN2 move to Fn'd Esc         when press
+    [3] = ACTION_LAYER_SET(7, ON_PRESS),     // FN3 move to Fn'd arrow + Esc when press
+
+    //[4] = ACTION_LAYER_CLEAR(ON_RELEASE),    // FN4 clear overlay            when release
+    [4] = ACTION_LAYER_SET(0, ON_RELEASE),   // FN4 clear overlay            when release
+    [5] = ACTION_LAYER_SET(1, ON_RELEASE),   // FN5 move to arrow            when release
+    [6] = ACTION_LAYER_SET(2, ON_RELEASE),   // FN6 move to Esc              when release
+    [7] = ACTION_LAYER_SET(3, ON_RELEASE),   // FN7 move to arrow + Esc      when release
+
+    [8] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // FN8 Task(RControl,RShift+Esc)
+};
diff --git a/keyboards/s60-x/keymaps/poker_set/readme.md b/keyboards/s60-x/keymaps/poker_set/readme.md
new file mode 100644
index 0000000000..0d8be9d0f8
--- /dev/null
+++ b/keyboards/s60-x/keymaps/poker_set/readme.md
@@ -0,0 +1,31 @@
+### 3  Poker
+[keymap_poker.c](keymap_poker.c) emulates original Poker layers
+while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+
+    Fn + Esc = `
+    Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
+
+#### 3.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn  │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 3.1 Poker Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │ FnQ │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Tsk │ End │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│ FnS │█████│█████│█████│ Fn  │Left │Down │Right│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/keymaps/spacefn/keymap.c b/keyboards/s60-x/keymaps/spacefn/keymap.c
new file mode 100644
index 0000000000..c930705320
--- /dev/null
+++ b/keyboards/s60-x/keymaps/spacefn/keymap.c
@@ -0,0 +1,55 @@
+#include "keymap_common.h"
+
+/*
+ * SpaceFN
+ * http://geekhack.org/index.php?topic=51069.0
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap 0: Default Layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████Spc/Fn0█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    KEYMAP(
+         ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
+         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
+        CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+        LCTL, LGUI, LALT,                FN0,                 RALT, RGUI,  APP, RCTL),
+
+    /* Overlay 1: SpaceFN
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│  `  │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │ Esc │     │     │     │Home │ Up  │ End │Pscr │Slck │Pause│ Ins │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │     │     │     │PgUp │Left │Down │Right│     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │▒▒▒▒▒│     │     │     │Space│PgDwn│  `  │  ~  │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    KEYMAP(
+	 GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS,  DEL, \
+        TRNS, TRNS, TRNS,  ESC, TRNS, TRNS, TRNS, HOME,   UP,  END, PSCR, SLCK, PAUS,  INS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS,       \
+	TRNS, TRNS, TRNS, TRNS, TRNS,  SPC, PGDN,  GRV,  FN1, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
+    [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),    // tilde
+};
diff --git a/keyboards/s60-x/keymaps/spacefn/readme.md b/keyboards/s60-x/keymaps/spacefn/readme.md
new file mode 100644
index 0000000000..d04bd94865
--- /dev/null
+++ b/keyboards/s60-x/keymaps/spacefn/readme.md
@@ -0,0 +1,27 @@
+### 6. SpaceFN
+This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
+
+#### 6.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│████ Space/Fn ███│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 6.1 SpaceFN layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │     │     │     │     │Home │ Up  │ End │ Psc │ Slk │Pause│ Ins │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │     │     │     │PgUp │Left │Down │Right│     │     │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│     │     │     │     │Space│PgDwn│  `  │  ~  │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│ Fn  │█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index 34c48b0b7d..0872c2e018 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -1,32 +1,248 @@
-S60-x keyboard firmware
+S60-x keyboard firmware
 ======================
-DIY compact keyboard by Massdrop. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/jpec/s60x).
+DIY compact keyboard designed by VinnyCordeiro for Sentraq. Most of the keymaps are based on GH60 code. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/VinnyCordeiro/tmk_keyboard).
 
 ## S60X Resources
-- [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit)
+- [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open)
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
 
-## Building
+## Keymap
+Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
 
-Download or clone the whole firmware and navigate to the keyboards/s60-x folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+To build firmware binary hex file with a certain keymap just run `make` with the `keymap` option like:
 
-Depending on which keymap you would like to use, you will have to compile slightly differently.
+    $ make keymap=[custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
 
-### Default
+File [S60-X_pre-compiled_firmwares.zip](S60-X_pre-compiled_firmwares.zip) contains pre-compiled firmwares for all keymaps available. Not all of them are tested.
 
-To build with the default keymap, simply run `make`.
 
-### Other Keymaps
+## Flashing your keyboard
+The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.atmel.com/tools/FLIP.aspx) (Windows) and [dfu-programmer](http://dfu-programmer.sourceforge.net/) (Linux/Windows).
 
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+[QMK Firmware Flasher](https://github.com/jackhumbert/qmk_firmware_flasher/releases) may work, as the S60-X keyboard uses the ATMega32U4 microcontroller, but it is untested. Use at your own risk.
 
-To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+[Easy AVR USB Keyboard Firmware](https://deskthority.net/wiki/Easy_AVR_USB_Keyboard_Firmware) also supports S60-X, but it is completely unrelated to TMK firmware. Use at your own risk.
 
-```
-$ make keymap=[default|<name>]
-```
+**Programming the firmware (Windows)**
 
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
+1. download and install FLIP (http://www.atmel.com/tools/FLIP.aspx)
+2. connect the keyboard, press the program button (S1) and wait until it enumerates
+3. go to device manager, find the atmega32u4 chip and click "update driver"
+4. choose location manually: folder named "usb" inside the installation directory of FLIP
+5. once the driver is installed, run flip
+6. Device -> Select: choose ATMega32U4
+7. Settings -> Communication -> USB, FLIP should show the signature at this point (58 1E 95 87)
+8. File -> Load HEX file: choose the hex firmware: <firmware>.hex
+9. click "Run"
+10. after programming is done, disconnect the device from USB and connect again.
+
+
+**Programming the firmware (Linux)**
+
+1. Download and install/compile/unpack dfu-programmer from http://dfu-programmer.sourceforge.net/.
+2. Issue the following commands in the command prompt after connecting the device and pressing the programming button (S1). You may need root permissions or udev rules to do that.
+  1. `sudo dfu-programmer atmega32u4 erase`
+  2. `sudo dfu-programmer atmega32u4 flash <firmware>.hex`
+  3. `sudo dfu-programmer atmega32u4 start`
+3. The keyboard should start working. If it doesn't, reconnect the cable.
+
+
+### 0  Initial explanations
+The █████ blocks on the layouts hides the switch positions that do not exist physically on the PCB. If you feel like hacking the keyboard and adding new keys, those are the positions that can be used. You'll have to modify the [keymap_common.h](keymap_common.h) file for that.
+
+The ▒▒▒▒▒ blocks hides switch positions not used on this particular layout, but they do exist on the PCB.
+
+There is no LED support on the PCB at the moment, but I'll let the code for that untouched.
+
+
+### 1  Standard - ANSI
+The standard keymap is the one that is pre-flashed on the S60-X.
+
+#### 1.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 1.1 Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+
+### 2  Standard - ISO
+The same as the standard keymap, but with additional ISO keys.
+
+
+#### 2.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │▒▒▒▒▒│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │NUHS │ENTER│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LSHFT│  \  │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 2.1 Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │     │     │     │     │     │     │     │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+    
+### 3  Poker
+[keymap_poker.c](keymap_poker.c) emulates original Poker layers
+while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+
+    Fn + Esc = `
+    Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
+
+#### 3.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Fn  │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 3.1 Poker Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │ FnQ │ Up  │     │     │     │     │     │     │ Cal │     │Home │ Ins │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │ Psc │ Slk │Pause│     │ Tsk │ End │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│ Del │     │ Web │Mute │ VoU │ VoD │     │PgUp │PgDwn│ Del │▒▒▒▒▒│ Up  │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│ FnS │█████│█████│█████│ Fn  │Left │Down │Right│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+
+### 4. Plain
+Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
+See [keymap_plain.c](keymap_plain.c) for detail.
+
+#### 4.0 Plain Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+
+### 5. Hasu
+This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
+
+(Hasu is the creator of the TMK firmware, for those who do not know that.)
+
+
+### 6. SpaceFN
+This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
+
+#### 6.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│████ Space/Fn ███│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 6.1 SpaceFN layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │     │     │     │     │Home │ Up  │ End │ Psc │ Slk │Pause│ Ins │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │     │     │     │PgUp │Left │Down │Right│     │     │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│     │     │     │     │Space│PgDwn│  `  │  ~  │     │     │▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│ Fn  │█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+
+### 7. HHKB
+[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
+#### 7.0: Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │BkSpc│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │ Fn3 │  '  │▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│Shift│ Fn  │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 7.1: HHKB Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ Pwr │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │ Ins │ Del │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │     │     │     │     │     │     │     │ Psc │ Slk │ Pus │ Up  │     │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │ VoD │ VoU │ Mut │ Ejc │     │  *  │  /  │Home │PgUp │Left │Right│▒▒▒▒▒│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │▒▒▒▒▒│     │     │     │     │     │  +  │  -  │ End │PgDwn│Down │▒▒▒▒▒│     │     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │▒▒▒▒▒│     │     │█████│█████│█████│     │█████│█████│█████│▒▒▒▒▒│     │     │▒▒▒▒▒│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+    
+### 8  Custom
+The custom keymap - [keymap_custom.c](keymap_custom.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
+
+#### 8.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │PgUp │BkSpc│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Caps │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │PgDwn│Enter│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Shift│Home │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │ End │Shift│  Up │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
index 68f2ab22f2..91e7b67f31 100644
--- a/keyboards/s60-x/s60-x.h
+++ b/keyboards/s60-x/s60-x.h
@@ -22,6 +22,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
+#ifdef __INTELLISENSE__
+#define PROGMEM
+#include "config.h"
+#endif
+
 /* S60-X keymap definition macro
 * K31 is the extra key next to short left ISO shift
 * K2C is the moved key next to enter on ISO boards
-- 
cgit v1.2.3


From 97fca1efff37f749fae8d53bb5ee4da9f8a898c5 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Sat, 13 Aug 2016 20:14:27 -0700
Subject: Fixing a mixup. Tidying up the keymap.

---
 keyboards/atreus/keymaps/xyverz/keymap.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
index 1ce92b4f22..b418cc9b5e 100644
--- a/keyboards/atreus/keymaps/xyverz/keymap.c
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -46,24 +46,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_L1] = { /* LAYER 1 */
     {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_NO,   KC_6,    KC_7,    KC_8,    KC_9,    KC_0   },
     {KC_TAB,  KC_INS,  KC_UP,   KC_DEL,  KC_HOME, KC_NO,   KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
-<<<<<<< HEAD
     {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
-=======
-    {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
->>>>>>> upstream/master
     {KC_TRNS, KC_GRV,  KC_LGUI, KC_TRNS, KC_DEL,  KC_LALT, KC_SPC,  KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
   },
   [_L2] = { /* LAYER 2 */
     {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
-<<<<<<< HEAD
     {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_PLUS},
     {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12 },
     {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET}
-=======
-    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 },
-    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12 },
-    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, RESET  }
->>>>>>> upstream/master
   }
 };
 
-- 
cgit v1.2.3


From 049343e523857eef6fe03bfd5ec73d830639e0b6 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Sun, 14 Aug 2016 00:33:11 -0700
Subject: Added my own layout to the Phantom.

---
 keyboards/phantom/keymaps/xyverz/keymap.c | 104 ++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 keyboards/phantom/keymaps/xyverz/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..aa6af18b1d
--- /dev/null
+++ b/keyboards/phantom/keymaps/xyverz/keymap.c
@@ -0,0 +1,104 @@
+#include "phantom.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _FL 3
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QW] = { /* Layer 0: Qwerty */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_DV] = { /* Layer 1: Dvorak */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_CM] = { /* Layer 2: Colemak */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_BSPC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_FL] = { /* Layer 3: Functions */
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, RESET,   KC_MPRV, KC_MPLY, KC_MNXT},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX},
+    {_______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX},
+    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______},
+  },
+
+
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
-- 
cgit v1.2.3


From 880486bd247b93800f9d007f0ba90d38d5397b41 Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 10:46:40 +0200
Subject: Jack's keymap.

---
 keyboards/preonic/keymaps/jacwib/Makefile  |  25 ++++
 keyboards/preonic/keymaps/jacwib/config.h  |   9 ++
 keyboards/preonic/keymaps/jacwib/keymap.c  | 215 +++++++++++++++++++++++++++++
 keyboards/preonic/keymaps/jacwib/readme.md |   2 +
 4 files changed, 251 insertions(+)
 create mode 100644 keyboards/preonic/keymaps/jacwib/Makefile
 create mode 100644 keyboards/preonic/keymaps/jacwib/config.h
 create mode 100644 keyboards/preonic/keymaps/jacwib/keymap.c
 create mode 100644 keyboards/preonic/keymaps/jacwib/readme.md

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/Makefile b/keyboards/preonic/keymaps/jacwib/Makefile
new file mode 100644
index 0000000000..1743c64878
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/preonic/keymaps/jacwib/config.h b/keyboards/preonic/keymaps/jacwib/config.h
new file mode 100644
index 0000000000..330686559f
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/config.h
@@ -0,0 +1,9 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+#define FORCE_NKRO 1
+
+#endif
diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c
new file mode 100644
index 0000000000..1d5e0a7771
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/keymap.c
@@ -0,0 +1,215 @@
+#include "preonic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "keymap_nordic.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   +  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  Å   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   Ö  |  Ä   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   <  |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   .  |   ,  |  -   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  |AltGr |Lower | Space| Enter|Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    NO_PLUS, KC_BSPC},//Done
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    NO_AM  },//Done
+  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    NO_AE,   NO_OSLH},//Done
+  {KC_LSFT, NO_LESS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_DOT,  KC_COMM, NO_MINS},//Done
+  {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER,   KC_SPC,  KC_ENT,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}//Done
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   @  |   £  |   $  |      |      |   {  |   [  |   ]  |   }  |   \  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |VolUp |      |      |  ~   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |LastS |PauseP|NextS |      |  *   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   |  |      |      |      |      |      |      |VolDwn|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |Bspc  |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {_______, NO_AT,   NO_PND,  NO_DLR,  _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},//Done
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},//Done
+  {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN},//Done
+  {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},//Done
+  {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}//Done
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   !  |   "  |   #  |   ¤  |   %  |   &  |   /  |   (  |   )  |   =  |   ?  | Ins  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Mouse^|      |      |      |      |ScrlUp|      |      |  ^   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |Mouse<|MouseV|Mouse>|      |      |MLC   |MMC   |MRC   |   '  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   >  |      |      |      |      |      |      |ScrlDown| :  |  ;   |  _   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |Bspc  |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL,  NO_QUES, KC_INS},//Done
+  {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},//Done
+  {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},//Done
+  {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},//Done
+  {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}//Done
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      | Reset|      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |Rsft  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |MusOn |MusOff|      |      |      |      |      |      |      |      | Reset|
+ * |------+------+------+------+------+------+------+------+------+------+--,----+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},//Done
+  {_______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______},//Done
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},//Done
+  {_______, MU_ON,   MU_OFF,  _______, _______, _______, _______, _______, _______, _______, _______, RESET  },//Done
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}//Done
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE //Mario theme song: E5 E5 E5 C5 E5 G5 G4
+float tone_startup[][2] = {
+  {NOTE_B5, 20},
+  {NOTE_B6, 8},
+  {NOTE_DS6, 20},
+  {NOTE_B6, 8}
+};
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case BACKLIT:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+          return false;
+          break;
+      }
+    return true;
+};
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md
new file mode 100644
index 0000000000..e81c62f76e
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/readme.md
@@ -0,0 +1,2 @@
+# Jack's preonic keymap.
+Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap.
\ No newline at end of file
-- 
cgit v1.2.3


From 1ab78110bd21b32a59eea46558ab4d83c5658cdb Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 10:48:22 +0200
Subject: Update readme.md

---
 keyboards/preonic/keymaps/jacwib/readme.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md
index e81c62f76e..838af399cf 100644
--- a/keyboards/preonic/keymaps/jacwib/readme.md
+++ b/keyboards/preonic/keymaps/jacwib/readme.md
@@ -1,2 +1,2 @@
-# Jack's preonic keymap.
-Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap.
\ No newline at end of file
+# Jacwib's preonic keymap.
+Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap.
-- 
cgit v1.2.3


From cf91aa416a6c32e2fa02d3ad31605ff1f24aab5e Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 10:48:52 +0200
Subject: Update keymap.c

---
 keyboards/preonic/keymaps/jacwib/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c
index 1d5e0a7771..4ddaa962e1 100644
--- a/keyboards/preonic/keymaps/jacwib/keymap.c
+++ b/keyboards/preonic/keymaps/jacwib/keymap.c
@@ -100,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |      |      |      |      |      |Rsft  |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |MusOn |MusOff|      |      |      |      |      |      |      |      | Reset|
- * |------+------+------+------+------+------+------+------+------+------+--,----+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-- 
cgit v1.2.3


From 62004866b3eee07a39a6caa0f6f3a2df0d5b2ef5 Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 10:49:06 +0200
Subject: Update config.h

---
 keyboards/preonic/keymaps/jacwib/config.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/config.h b/keyboards/preonic/keymaps/jacwib/config.h
index 330686559f..23e9e0ed28 100644
--- a/keyboards/preonic/keymaps/jacwib/config.h
+++ b/keyboards/preonic/keymaps/jacwib/config.h
@@ -3,7 +3,6 @@
 
 #include "../../config.h"
 
-// place overrides here
 #define FORCE_NKRO 1
 
 #endif
-- 
cgit v1.2.3


From 26f4a0cf04cc11690abc80f644b5fbdc869cf056 Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 10:49:26 +0200
Subject: Update Makefile

---
 keyboards/preonic/keymaps/jacwib/Makefile | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/Makefile b/keyboards/preonic/keymaps/jacwib/Makefile
index 1743c64878..3e87d41d36 100644
--- a/keyboards/preonic/keymaps/jacwib/Makefile
+++ b/keyboards/preonic/keymaps/jacwib/Makefile
@@ -1,9 +1,5 @@
 
 
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
@@ -17,7 +13,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 ifndef QUANTUM_DIR
-- 
cgit v1.2.3


From e4e13ddc54d90b41a882c76a2d28f28763117763 Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 10:57:47 +0200
Subject: Update readme.md

---
 keyboards/preonic/keymaps/jacwib/readme.md | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md
index 838af399cf..0660312353 100644
--- a/keyboards/preonic/keymaps/jacwib/readme.md
+++ b/keyboards/preonic/keymaps/jacwib/readme.md
@@ -1,2 +1,3 @@
 # Jacwib's preonic keymap.
-Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap.
+
+Designed for use with a swedish language.
-- 
cgit v1.2.3


From 6ba27ea31883d52b3e023681edc344cc95e90317 Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:02:46 +0200
Subject: Remove pointless comments

---
 keyboards/preonic/keymaps/jacwib/keymap.c | 42 +++++++++++++++----------------
 1 file changed, 21 insertions(+), 21 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c
index 4ddaa962e1..53604ef018 100644
--- a/keyboards/preonic/keymaps/jacwib/keymap.c
+++ b/keyboards/preonic/keymaps/jacwib/keymap.c
@@ -42,11 +42,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_QWERTY] = {
-  {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    NO_PLUS, KC_BSPC},//Done
-  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    NO_AM  },//Done
-  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    NO_AE,   NO_OSLH},//Done
-  {KC_LSFT, NO_LESS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_DOT,  KC_COMM, NO_MINS},//Done
-  {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER,   KC_SPC,  KC_ENT,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}//Done
+  {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    NO_PLUS, KC_BSPC},
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    NO_AM  },
+  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    NO_AE,   NO_OSLH},
+  {KC_LSFT, NO_LESS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_DOT,  KC_COMM, NO_MINS},
+  {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER,   KC_SPC,  KC_ENT,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
 
 /* Lower
@@ -63,11 +63,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_LOWER] = {
-  {_______, NO_AT,   NO_PND,  NO_DLR,  _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},//Done
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},//Done
-  {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN},//Done
-  {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},//Done
-  {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}//Done
+  {_______, NO_AT,   NO_PND,  NO_DLR,  _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},
+  {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN},
+  {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}
 },
 
 /* Raise
@@ -84,11 +84,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_RAISE] = {
-  {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL,  NO_QUES, KC_INS},//Done
-  {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},//Done
-  {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},//Done
-  {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},//Done
-  {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}//Done
+  {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL,  NO_QUES, KC_INS},
+  {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},
+  {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},
+  {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},
+  {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}
 },
 
 /* Adjust (Lower + Raise)
@@ -105,17 +105,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_ADJUST] = {
-  {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},//Done
-  {_______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______},//Done
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},//Done
-  {_______, MU_ON,   MU_OFF,  _______, _______, _______, _______, _______, _______, _______, _______, RESET  },//Done
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}//Done
+  {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},
+  {_______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},
+  {_______, MU_ON,   MU_OFF,  _______, _______, _______, _______, _______, _______, _______, _______, RESET  },
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 }
 
 
 };
 
-#ifdef AUDIO_ENABLE //Mario theme song: E5 E5 E5 C5 E5 G5 G4
+#ifdef AUDIO_ENABLE
 float tone_startup[][2] = {
   {NOTE_B5, 20},
   {NOTE_B6, 8},
-- 
cgit v1.2.3


From 54e37fd2d10f91b1b77cee263c1e3a2b3552cbd9 Mon Sep 17 00:00:00 2001
From: jacwib <jacwib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:08:01 +0200
Subject: Fix bug

---
 keyboards/preonic/keymaps/jacwib/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c
index 53604ef018..cf441bf309 100644
--- a/keyboards/preonic/keymaps/jacwib/keymap.c
+++ b/keyboards/preonic/keymaps/jacwib/keymap.c
@@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_LOWER] = {
   {_______, NO_AT,   NO_PND,  NO_DLR,  _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},
   {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},
-  {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN},
+  {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, LSFT(KC_BSLS)},
   {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},
   {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}
 },
-- 
cgit v1.2.3


From ec75c04663e9e8cc4682f8e1239dafd6816e2cf3 Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:44:43 +0200
Subject: Fixed links to keymap sources

---
 keyboards/s60-x/readme.md | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index 0872c2e018..d01e1a12eb 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -58,7 +58,7 @@ The ▒▒▒▒▒ blocks hides switch positions not used on this particular la
 There is no LED support on the PCB at the moment, but I'll let the code for that untouched.
 
 
-### 1  Standard - ANSI
+### 1  [Standard - ANSI (default layout)](keymaps/default/keymap.c)
 The standard keymap is the one that is pre-flashed on the S60-X.
 
 #### 1.0 Default layer
@@ -87,7 +87,7 @@ The standard keymap is the one that is pre-flashed on the S60-X.
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 
 
-### 2  Standard - ISO
+### 2  [Standard - ISO](keymaps/iso/keymap.c)
 The same as the standard keymap, but with additional ISO keys.
 
 
@@ -118,8 +118,8 @@ The same as the standard keymap, but with additional ISO keys.
 
     
 ### 3  Poker
-[keymap_poker.c](keymap_poker.c) emulates original Poker layers
-while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+[The poker keymap](keymaps/poker/keymap.c) emulates original Vortex Poker layers
+while both [poker_bit](keymaps/poker_bit/keymap.c) and [poker_set](keymap/poker_set/keymap.c) implement the same layout in a slightly different way, fix a minor issue of the original poker Layout and enhance arrow keys.
 
     Fn + Esc = `
     Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
@@ -150,9 +150,8 @@ while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](key
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 
 
-### 4. Plain
+### 4. [Plain](keymaps/plain/keymap.c)
 Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
-See [keymap_plain.c](keymap_plain.c) for detail.
 
 #### 4.0 Plain Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
@@ -168,14 +167,14 @@ See [keymap_plain.c](keymap_plain.c) for detail.
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 
 
-### 5. Hasu
-This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
+### 5. [Hasu](keymaps/hasu/keymap.c)
+This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer.
 
 (Hasu is the creator of the TMK firmware, for those who do not know that.)
 
 
-### 6. SpaceFN
-This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
+### 6. [SpaceFN](keymaps/spacefn/keymap.c)
+This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. Check the sourcefile and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0) for more information.
 
 #### 6.0 Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
@@ -203,8 +202,8 @@ This layout proposed by spiceBar uses space bar to change layer with using Dual
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 
 
-### 7. HHKB
-[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
+### 7. [HHKB](keymap/hhkb/keymap.c)
+The HHKB keymap emulates original HHKB layers.
 #### 7.0: Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
     │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
@@ -231,8 +230,8 @@ This layout proposed by spiceBar uses space bar to change layer with using Dual
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 
     
-### 8  Custom
-The custom keymap - [keymap_custom.c](keymap_custom.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
+### 8  [Custom](keymaps/custom/keymap.c]
+The custom keymap is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
 
 #### 8.0 Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
-- 
cgit v1.2.3


From 6774f300da7954e3009d6c9b1ee7611327e7378a Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:48:59 +0200
Subject: Update readme.md

---
 keyboards/s60-x/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index d01e1a12eb..1509625651 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -230,7 +230,7 @@ The HHKB keymap emulates original HHKB layers.
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 
     
-### 8  [Custom](keymaps/custom/keymap.c]
+### 8  [Custom](keymaps/custom/keymap.c)
 The custom keymap is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
 
 #### 8.0 Default layer
-- 
cgit v1.2.3


From df01d502d4b531cc29b3277e093dcf3b63150647 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Sun, 14 Aug 2016 13:07:03 +0200
Subject: Ported all keymaps Old TMK keymaps were ported and confirmed to
 compile All keymaps compiled and added to zip-archive. Documentation was
 updated.

---
 keyboards/s60-x/keymaps/custom/keymap.c    |   6 ++---
 keyboards/s60-x/keymaps/default/keymap.c   |   8 +++---
 keyboards/s60-x/keymaps/hasu/keymap.c      |  20 +++++++--------
 keyboards/s60-x/keymaps/hhkb/keymap.c      |  24 ++++++++---------
 keyboards/s60-x/keymaps/iso/keymap.c       |   8 +++---
 keyboards/s60-x/keymaps/jpec/keymap.c      |   4 +--
 keyboards/s60-x/keymaps/plain/keymap.c     |   6 ++---
 keyboards/s60-x/keymaps/poker/keymap.c     |  40 ++++++++++++++---------------
 keyboards/s60-x/keymaps/poker_bit/keymap.c |  14 +++++-----
 keyboards/s60-x/keymaps/poker_set/keymap.c |  20 +++++++--------
 keyboards/s60-x/keymaps/spacefn/keymap.c   |   8 +++---
 keyboards/s60-x/readme.md                  |  32 +++++++++++++----------
 keyboards/s60-x/s60-x.h                    |  17 ++++++++++++
 keyboards/s60-x/s60-x_precompiled.zip      | Bin 0 -> 276106 bytes
 14 files changed, 115 insertions(+), 92 deletions(-)
 create mode 100644 keyboards/s60-x/s60-x_precompiled.zip

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/custom/keymap.c b/keyboards/s60-x/keymaps/custom/keymap.c
index 59361241fa..fb2a40b85e 100644
--- a/keyboards/s60-x/keymaps/custom/keymap.c
+++ b/keyboards/s60-x/keymaps/custom/keymap.c
@@ -1,4 +1,4 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 /* Main layer: Test layout, using all keys.
 
@@ -16,9 +16,9 @@
    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
 
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: ANSI qwerty */
-    KEYMAP(GRV,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL, PGUP, BSPC, \
+	LEGACY_KEYMAP(GRV,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL, PGUP, BSPC, \
            TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC, BSLS,       \
           CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT, PGDN, ENT ,       \
           LSFT, HOME,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,  END, RSFT,   UP, \
diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
index be7a71aff0..eb0c6b056e 100644
--- a/keyboards/s60-x/keymaps/default/keymap.c
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -1,4 +1,4 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 /* 0: Main layer
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
@@ -14,9 +14,9 @@
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
 
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: ANSI qwerty */
-    KEYMAP(ESC,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL,   NO, BSPC, \
+    LEGACY_KEYMAP(ESC,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL,   NO, BSPC, \
            TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC, BSLS,       \
           CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT,   NO, ENT ,       \
           LSFT,   NO,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
@@ -35,7 +35,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         TRNS, TRNS,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
diff --git a/keyboards/s60-x/keymaps/hasu/keymap.c b/keyboards/s60-x/keymaps/hasu/keymap.c
index 46ea81fea2..cbeaae0281 100644
--- a/keyboards/s60-x/keymaps/hasu/keymap.c
+++ b/keyboards/s60-x/keymaps/hasu/keymap.c
@@ -1,9 +1,9 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 /*
  * Hasu
  */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap 0: Default Layer
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -17,7 +17,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ Fn3 │ Fn3 │ Fn0 │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      */
-    KEYMAP(
+	LEGACY_KEYMAP(
          ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
          TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
         CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L,  FN2, QUOT,   NO,  ENT,       \
@@ -36,7 +36,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ Fn0 │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS, EQL,   NO, BSPC, \
          TAB,    Q,    W,   F,   P,   G,   J,   L,   U,    Y, SCLN, LBRC, RBRC, BSLS,      \
         BSPC,    A,    R,   S,   T,   D,   H,   N,   E,    I,    O, QUOT,   NO,  ENT,      \
@@ -55,7 +55,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ FN0 │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘   
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,    3,   4,   5,   6,   7,   8,   9,   0, LBRC, RBRC,   NO, BSPC, \
          TAB, QUOT, COMM,  DOT,   P,   Y,   F,   G,   C,   R,   L, SLSH,  EQL, BSLS,       \
         CAPS,    A,    O,    E,   U,   I,   D,   H,   T,   N,   S, MINS,   NO,  ENT,       \
@@ -74,7 +74,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│R_WIN│ APP │ FN0 │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
          TAB,    Q,    D,   R,   W,   B,   J,   F,   U,    P, SCLN, LBRC, RBRC, BSLS,       \
         BSPC,    A,    S,   H,   T,   G,   Y,   N,   E,    O,    I, QUOT,   NO,  ENT,       \
@@ -93,7 +93,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_GUI│L_ALT│█████│█████│█████│Space│█████│█████│█████│R_ALT│R_GUI│ App │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS,  DEL, \
         CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS,   UP, TRNS,  INS,       \
         LCTL, VOLD, VOLU, MUTE, TRNS, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT, TRNS,  ENT,       \
@@ -112,7 +112,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_GUI│L_ALT│█████│█████│█████│Space│█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV, F1,     F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, BSPC, \
          TAB, HOME, PGDN,   UP, PGUP,  END, HOME, PGDN, PGUP,  END, TRNS, TRNS, TRNS, TRNS,       \
         LCTL, TRNS, LEFT, DOWN, RGHT, TRNS, LEFT, DOWN,   UP, RGHT, TRNS, TRNS, TRNS,  ENT,       \
@@ -132,7 +132,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
      */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, BSPC, \
          TAB, TRNS, TRNS, TRNS, TRNS, TRNS, WH_L, WH_D, WH_U, WH_R, TRNS, TRNS, TRNS, TRNS,       \
         LCTL, TRNS, ACL0, ACL1, ACL2, TRNS, MS_L, MS_D, MS_U, MS_R, TRNS, TRNS, TRNS,  ENT,       \
@@ -157,7 +157,7 @@ Ld: set Dvorak layout
 Lw: set Workman layout
 
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          FN5,  FN6,  FN7,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
 	TRNS,  FN5,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
 	TRNS, TRNS, TRNS,  FN7, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
diff --git a/keyboards/s60-x/keymaps/hhkb/keymap.c b/keyboards/s60-x/keymaps/hhkb/keymap.c
index a6e5b3279a..9afd1247f8 100644
--- a/keyboards/s60-x/keymaps/hhkb/keymap.c
+++ b/keyboards/s60-x/keymaps/hhkb/keymap.c
@@ -1,9 +1,9 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 /*
  * HHKB Layout
  */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: Default layer
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
@@ -17,12 +17,12 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │▒▒▒▒▒│ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│▒▒▒▒▒│ Alt │ Gui │▒▒▒▒▒│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      */
-    KEYMAP(
-         ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL, BSLS, GRV, \
-         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSPC,      \
+    LEGACY_KEYMAP(
+        ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL, BSLS, GRV, \
+        TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSPC,      \
         LCTL,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,      \
         LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT, FN0, \
-          NO, LGUI, LALT,                SPC,                   NO, RALT, RGUI,   NO),
+        NO, LGUI, LALT,                SPC,                   NO, RALT, RGUI,   NO),
     /* 1: HHKB Fn layer
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │ Pwr │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │ Ins │ Del │
@@ -36,12 +36,12 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │▒▒▒▒▒│     │     │█████│█████│█████│     │█████│█████│█████│▒▒▒▒▒│     │     │▒▒▒▒▒│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      */
-    KEYMAP(
-	 PWR,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12,  INS,  DEL, \
-	CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS,   UP, TRNS, TRNS,       \
-	TRNS, VOLD, VOLU, MUTE, EJCT, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT,   NO, PENT,       \
-	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS,  END, PGDN, DOWN,   NO, TRNS, TRNS, \
-	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+    LEGACY_KEYMAP(
+       PWR,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12,  INS,  DEL, \
+       CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS,   UP, TRNS, TRNS,       \
+       TRNS, VOLD, VOLU, MUTE, EJCT, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT,   NO, PENT,       \
+       TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS,  END, PGDN, DOWN,   NO, TRNS, TRNS, \
+       TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
 };
 
 /*
diff --git a/keyboards/s60-x/keymaps/iso/keymap.c b/keyboards/s60-x/keymaps/iso/keymap.c
index ad597cd7d4..43a9c48b05 100644
--- a/keyboards/s60-x/keymaps/iso/keymap.c
+++ b/keyboards/s60-x/keymaps/iso/keymap.c
@@ -1,4 +1,4 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 /* 0: Main layer
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
@@ -14,9 +14,9 @@
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
 
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: ANSI qwerty */
-    KEYMAP(ESC,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL,   NO, BSPC, \
+    LEGACY_KEYMAP(ESC,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL,   NO, BSPC, \
            TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC,   NO,       \
           CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT, NUHS, ENT ,       \
           LSFT, BSLS,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
@@ -35,7 +35,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         TRNS, TRNS,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
diff --git a/keyboards/s60-x/keymaps/jpec/keymap.c b/keyboards/s60-x/keymaps/jpec/keymap.c
index 3b680c3072..c8fc133288 100644
--- a/keyboards/s60-x/keymaps/jpec/keymap.c
+++ b/keyboards/s60-x/keymaps/jpec/keymap.c
@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |Fn1 |Gui |Alt |        SpaceFn         |Alt |Gui |App |Ctrl|
 	* `-----------------------------------------------------------'
 	*/
-	KEYMAP(
+    LEGACY_KEYMAP(
 		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS,  EQL, BSPC, BSPC, \
 		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
 		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN,    QUOT, NUHS, ENT,  \
@@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |    |    |    |                        |    |    |    |    |
 	* `-----------------------------------------------------------'
 	*/
-	KEYMAP(
+    LEGACY_KEYMAP(
 		ESC,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,  TRNS, DEL,  \
 		TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP,   PGDN, TRNS, SLCK, PAUS, INS,  \
 		TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END,  TRNS, TRNS, PENT, \
diff --git a/keyboards/s60-x/keymaps/plain/keymap.c b/keyboards/s60-x/keymaps/plain/keymap.c
index 0f0cdee2a4..790ac88e73 100644
--- a/keyboards/s60-x/keymaps/plain/keymap.c
+++ b/keyboards/s60-x/keymaps/plain/keymap.c
@@ -1,4 +1,4 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 /* Main layer:
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
@@ -14,9 +14,9 @@
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 */
 
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty */
-    KEYMAP(ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS, EQL,    NO, BSPC, \
+    LEGACY_KEYMAP(ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS, EQL,    NO, BSPC, \
            TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
           CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT, NO,   ENT,        \
           LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH, NO,   RSFT,   NO, \
diff --git a/keyboards/s60-x/keymaps/poker/keymap.c b/keyboards/s60-x/keymaps/poker/keymap.c
index 5fc970a040..0a8691792a 100644
--- a/keyboards/s60-x/keymaps/poker/keymap.c
+++ b/keyboards/s60-x/keymaps/poker/keymap.c
@@ -1,6 +1,6 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -14,7 +14,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
          TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
         CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
@@ -33,7 +33,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS, EQL,   NO, BSPC, \
          TAB,    Q,    W,   F,   P,   G,   J,   L,   U,    Y, SCLN, LBRC, RBRC, BSLS,      \
         BSPC,    A,    R,   S,   T,   D,   H,   N,   E,    I,    O, QUOT,   NO,  ENT,      \
@@ -52,7 +52,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘   
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,    3,   4,   5,   6,   7,   8,   9,   0, LBRC, RBRC,   NO, BSPC, \
          TAB, QUOT, COMM,  DOT,   P,   Y,   F,   G,   C,   R,   L, SLSH,  EQL, BSLS,       \
         CAPS,    A,    O,    E,   U,   I,   D,   H,   T,   N,   S, MINS,   NO,  ENT,       \
@@ -71,7 +71,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
          TAB,    Q,    D,   R,   W,   B,   J,   F,   U,    P, SCLN, LBRC, RBRC, BSLS,       \
         BSPC,    A,    S,   H,   T,   G,   Y,   N,   E,    O,    I, QUOT,   NO,  ENT,       \
@@ -90,7 +90,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│     │Left │Down │Right│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
@@ -109,12 +109,12 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
-	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
-	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
-	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
-	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
     /* 6: Poker Fn
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │ Esc │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
@@ -134,8 +134,8 @@ FnQ: toggle Esc overlay
 FnS: toggle Arrow overlay
 
     */
-    KEYMAP(
-         ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+    LEGACY_KEYMAP(
+        ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         TRNS,  FN2,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS,  FN4,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN3,  END, TRNS, TRNS,       \
         TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, TRNS, TRNS, \
@@ -159,12 +159,12 @@ Ld: set Dvorak layout
 Lw: set Workman layout
 
     */
-    KEYMAP(
-         FN5,  FN6,  FN7,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
-	TRNS,  FN5,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
-	TRNS, TRNS, TRNS,  FN7, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
-	TRNS, TRNS, TRNS, TRNS,  FN6, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
-	TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
+    LEGACY_KEYMAP(
+        FN5,  FN6,  FN7,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS,  FN5,  FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS,  FN7, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS,  FN6, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
 };
 const uint16_t PROGMEM fn_actions[] = {
     /* Poker Layout */
diff --git a/keyboards/s60-x/keymaps/poker_bit/keymap.c b/keyboards/s60-x/keymaps/poker_bit/keymap.c
index 4a4cfd1be8..7626038f42 100644
--- a/keyboards/s60-x/keymaps/poker_bit/keymap.c
+++ b/keyboards/s60-x/keymaps/poker_bit/keymap.c
@@ -1,9 +1,9 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 // Poker fix with toggle and bit operation
 // Fn + Esc = `
 // Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -17,7 +17,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
          TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
         LCTL,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
@@ -36,7 +36,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│ Fn1 │█████│█████│█████│     │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    [4] = KEYMAP(
+    [4] = LEGACY_KEYMAP(
         TRNS,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         CAPS,  FN2,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN4,  END, TRNS, TRNS,       \
@@ -55,7 +55,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn3 │Home │PgDwn│ End │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
@@ -74,7 +74,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
 	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
 	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
@@ -93,7 +93,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│     │Left │Down │Right│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
diff --git a/keyboards/s60-x/keymaps/poker_set/keymap.c b/keyboards/s60-x/keymaps/poker_set/keymap.c
index 0c1ef1a9b9..09423e75b3 100644
--- a/keyboards/s60-x/keymaps/poker_set/keymap.c
+++ b/keyboards/s60-x/keymaps/poker_set/keymap.c
@@ -1,9 +1,9 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 // Poker fix with set(state transition)
 // Fn + Esc = `
 // Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -17,7 +17,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_WIN│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│ Fn0 │R_WIN│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
          TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
         LCTL,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
@@ -36,7 +36,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn1 │Left │Down │Right│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
@@ -55,7 +55,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn2 │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
 	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
 	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
@@ -74,7 +74,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│ Fn3 │Left │Down │Right│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
         TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
@@ -93,7 +93,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│ Fn5 │█████│█████│█████│ Fn4 │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         TRNS,  FN6,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
@@ -112,7 +112,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│ Fn4 │█████│█████│█████│ Fn5 │Home │PgDwn│ End │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         TRNS,  FN7,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
@@ -131,7 +131,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│ Fn7 │█████│█████│█████│ Fn6 │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         TRNS,  FN4,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
@@ -150,7 +150,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│ Fn6 │█████│█████│█████│ Fn7 │Home │PgDwn│ End │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
     */
-    KEYMAP(
+    LEGACY_KEYMAP(
          GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
         TRNS,  FN5,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS, TRNS,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN8,  END, TRNS, TRNS,       \
diff --git a/keyboards/s60-x/keymaps/spacefn/keymap.c b/keyboards/s60-x/keymaps/spacefn/keymap.c
index c930705320..b6dc7ca7eb 100644
--- a/keyboards/s60-x/keymaps/spacefn/keymap.c
+++ b/keyboards/s60-x/keymaps/spacefn/keymap.c
@@ -1,10 +1,10 @@
-#include "keymap_common.h"
+#include "s60-x.h"
 
 /*
  * SpaceFN
  * http://geekhack.org/index.php?topic=51069.0
  */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap 0: Default Layer
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -18,7 +18,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │LCTRL│L_GUI│L_ALT│█████│█████│█████Spc/Fn0█████│█████│█████│R_ALT│R_GUI│ APP │RCTRL│█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      */
-    KEYMAP(
+    LEGACY_KEYMAP(
          ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL,   NO, BSPC, \
          TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
         CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
@@ -38,7 +38,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
 └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
      */
-    KEYMAP(
+    LEGACY_KEYMAP(
 	 GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS,  DEL, \
         TRNS, TRNS, TRNS,  ESC, TRNS, TRNS, TRNS, HOME,   UP,  END, PSCR, SLCK, PAUS,  INS,       \
 	TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS,       \
diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index 1509625651..4bba4b68fa 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -5,19 +5,10 @@ DIY compact keyboard designed by VinnyCordeiro for Sentraq. Most of the keymaps
 ## S60X Resources
 - [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open)
 
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/readme.md).
-
-## Keymap
-Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
-
-To build firmware binary hex file with a certain keymap just run `make` with the `keymap` option like:
-
-    $ make keymap=[custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
-
-File [S60-X_pre-compiled_firmwares.zip](S60-X_pre-compiled_firmwares.zip) contains pre-compiled firmwares for all keymaps available. Not all of them are tested.
+## Quickstart
 
+If you just want to test a few layouts, the archive [s60-x_precompiled.zip](s60-x_precompiled.zip) contains pre-compiled .hex-files for all available keymaps. Not all of them are tested.
+You only need to flash them onto your keyboard, which is explained below, there's no need to setup a build environment. For a full list 
 
 ## Flashing your keyboard
 The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.atmel.com/tools/FLIP.aspx) (Windows) and [dfu-programmer](http://dfu-programmer.sourceforge.net/) (Linux/Windows).
@@ -29,7 +20,7 @@ The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.
 **Programming the firmware (Windows)**
 
 1. download and install FLIP (http://www.atmel.com/tools/FLIP.aspx)
-2. connect the keyboard, press the program button (S1) and wait until it enumerates
+2. connect the keyboard, press the program button on the underside of the board (S1) and wait until it enumerates (you'll hear the "disconnect" and "connect" sound)
 3. go to device manager, find the atmega32u4 chip and click "update driver"
 4. choose location manually: folder named "usb" inside the installation directory of FLIP
 5. once the driver is installed, run flip
@@ -49,6 +40,21 @@ The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.
   3. `sudo dfu-programmer atmega32u4 start`
 3. The keyboard should start working. If it doesn't, reconnect the cable.
 
+## Building the firmware
+
+To build firmware binary hex file with a certain keymap just run `make` with the `keymap` option like:
+
+    $ make keymap=[custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
+
+For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started).
+
+## List of included Keymaps
+
+Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. 
+To define your own keymap, copy the [default keymap template](/quantum/template/keymaps/default) directory into the `keymaps` directory and start modifying the `keymap.c` file. Some options might require you to change the `config.h` or `Makefile` as well, refer to the main documentation for more information on those.
+If you want to later merge your finalised keymap into this repository to make it available for everyone, make sure to also modify the `readme.md` in your keymap directory to show a visual version of your keymap.
+
+Here's a list of the standard layouts that are provided with the precompiled .hex-files.
 
 ### 0  Initial explanations
 The █████ blocks on the layouts hides the switch positions that do not exist physically on the PCB. If you feel like hacking the keyboard and adding new keys, those are the positions that can be used. You'll have to modify the [keymap_common.h](keymap_common.h) file for that.
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
index 91e7b67f31..29a2a27b22 100644
--- a/keyboards/s60-x/s60-x.h
+++ b/keyboards/s60-x/s60-x.h
@@ -49,4 +49,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO    }  \
 }
 
+/*This special definition is used for S60-X keymaps that were ported from TMK
+ * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended
+ */
+#define LEGACY_KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+  { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
+  { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO  }, \
+  { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO  }, \
+  { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
+  { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO  }  \
+}
+
 #endif
diff --git a/keyboards/s60-x/s60-x_precompiled.zip b/keyboards/s60-x/s60-x_precompiled.zip
new file mode 100644
index 0000000000..00d99ca8a1
Binary files /dev/null and b/keyboards/s60-x/s60-x_precompiled.zip differ
-- 
cgit v1.2.3


From 5705a403205c0c1e7c585e1a2edda21e79134ee6 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Sun, 14 Aug 2016 20:06:47 +0200
Subject: increased readability with a defince

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 32 +++++++++++++----------
 1 file changed, 18 insertions(+), 14 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 9f838ba617..68cc6755e1 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -2,6 +2,7 @@
 // this is the style you want to emulate.
 
 #include "satan.h"
+// TODO: replace your ugly german brckets with #defines
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -12,6 +13,9 @@
 #define _TAB 2
 #define _SFX 3
 
+// increase readability 
+#define _______ KC_TRNS
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap _DEF: Default Layer
      * ,-----------------------------------------------------------.
@@ -48,10 +52,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      */
     [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
         KC_PSCR, KC_F1,   KC_F2,   KC_F3,      KC_F4,      KC_F5,         KC_F6,   KC_F7,      KC_F8,      KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
-        KC_TRNS, KC_PAUS, KC_UP,   RALT(KC_8), RALT(KC_9), KC_TRNS,       KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-        KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,   KC_TRNS,    KC_TRNS,       KC_LEFT, KC_DOWN,    KC_UP,      KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_NUBS,    LSFT(KC_NUBS), KC_SPACE,M(0),       KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
-        KC_TRNS, KC_TRNS, KC_TRNS,                                        KC_TRNS,                                  KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
+        _______, KC_PAUS, KC_UP,   RALT(KC_8), RALT(KC_9), _______,       _______, LSFT(KC_8), LSFT(KC_9), _______, _______, _______, _______, _______, \
+        _______, KC_LEFT, KC_DOWN, KC_RIGHT,   _______,    _______,       KC_LEFT, KC_DOWN,    KC_UP,      KC_RGHT, _______, _______, _______, KC_MPLY, \
+        _______, _______, _______, _______,    KC_NUBS,    LSFT(KC_NUBS), KC_SPACE,M(0),       _______,    _______, _______, _______, _______, KC_VOLU, \
+        _______, _______, _______,                                        _______,                                  _______, KC_MPRV, KC_VOLD, KC_MNXT),
 
     /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
      * ,-----------------------------------------------------------.
@@ -67,11 +71,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
-        KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN,    KC_PGUP,    KC_END,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1),       KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
-        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                  KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+        KC_WAKE, _______, _______, _______, _______, _______, _______, _______,    _______,    _______, _______, _______, _______, KC_INS,  \
+        _______, _______, _______, _______, _______, _______, _______, RALT(KC_7), RALT(KC_0), _______, _______, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,    KC_PGUP,    KC_END,  _______, _______, _______, KC_ENT,  \
+        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,    _______, _______, _______, _______, KC_PGUP, \
+        _______, _______, _______,                            _______,                                  _______, KC_HOME, KC_PGDN, KC_END),
 
     /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
      * ,-----------------------------------------------------------.
@@ -87,11 +91,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
-        RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
-        KC_TRNS, F(2),    F(3),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1,    KC_2,    KC_3, KC_TRNS, KC_TRNS, KC_NO,   KC_ENT,  \
-        KC_TRNS, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP,   \
-        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT),
+        RESET,   _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9, _______, _______, _______, KC_BSPC, \
+        _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6, _______, _______, _______, KC_BSLS, \
+        _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, KC_NO,   KC_ENT,  \
+        _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, _______, KC_UP,   \
+        _______, _______, _______,                            _______,                         _______, KC_LEFT, KC_DOWN, KC_RGHT),
 };
 
 enum function_id {
-- 
cgit v1.2.3


From c6c2c3fc14736e4d226c5f410d8c3faf3d36629f Mon Sep 17 00:00:00 2001
From: di0ib <git@porkhash.net>
Date: Sun, 14 Aug 2016 10:58:10 -1000
Subject: minorca

minirca with RGB keymap
---
 keyboards/minorca/Makefile                  |  71 ++++++++++++++++++++++++
 keyboards/minorca/config.h                  |  80 ++++++++++++++++++++++++++++
 keyboards/minorca/keymaps/default/Makefile  |  25 +++++++++
 keyboards/minorca/keymaps/default/config.h  |  12 +++++
 keyboards/minorca/keymaps/default/keymap.c  |  44 +++++++++++++++
 keyboards/minorca/keymaps/default/readme.md |   5 ++
 keyboards/minorca/keymaps/readme.md         |  23 ++++++++
 keyboards/minorca/keymaps/rgb/Makefile      |  25 +++++++++
 keyboards/minorca/keymaps/rgb/config.h      |  20 +++++++
 keyboards/minorca/keymaps/rgb/example.jpg   | Bin 0 -> 72737 bytes
 keyboards/minorca/keymaps/rgb/keymap.c      |  65 ++++++++++++++++++++++
 keyboards/minorca/keymaps/rgb/readme.md     |  23 ++++++++
 keyboards/minorca/keymaps/rgb/wiring1.jpg   | Bin 0 -> 119547 bytes
 keyboards/minorca/keymaps/rgb/wiring2.jpg   | Bin 0 -> 94987 bytes
 keyboards/minorca/minorca.c                 |   6 +++
 keyboards/minorca/minorca.h                 |   6 +++
 keyboards/minorca/readme.md                 |  31 +++++++++++
 17 files changed, 436 insertions(+)
 create mode 100644 keyboards/minorca/Makefile
 create mode 100644 keyboards/minorca/config.h
 create mode 100644 keyboards/minorca/keymaps/default/Makefile
 create mode 100644 keyboards/minorca/keymaps/default/config.h
 create mode 100644 keyboards/minorca/keymaps/default/keymap.c
 create mode 100644 keyboards/minorca/keymaps/default/readme.md
 create mode 100644 keyboards/minorca/keymaps/readme.md
 create mode 100644 keyboards/minorca/keymaps/rgb/Makefile
 create mode 100644 keyboards/minorca/keymaps/rgb/config.h
 create mode 100644 keyboards/minorca/keymaps/rgb/example.jpg
 create mode 100644 keyboards/minorca/keymaps/rgb/keymap.c
 create mode 100644 keyboards/minorca/keymaps/rgb/readme.md
 create mode 100644 keyboards/minorca/keymaps/rgb/wiring1.jpg
 create mode 100644 keyboards/minorca/keymaps/rgb/wiring2.jpg
 create mode 100644 keyboards/minorca/minorca.c
 create mode 100644 keyboards/minorca/minorca.h
 create mode 100644 keyboards/minorca/readme.md

(limited to 'keyboards')

diff --git a/keyboards/minorca/Makefile b/keyboards/minorca/Makefile
new file mode 100644
index 0000000000..8cff000493
--- /dev/null
+++ b/keyboards/minorca/Makefile
@@ -0,0 +1,71 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minorca/config.h b/keyboards/minorca/config.h
new file mode 100644
index 0000000000..4cdafcbd2e
--- /dev/null
+++ b/keyboards/minorca/config.h
@@ -0,0 +1,80 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6660
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ME
+#define PRODUCT         MinOrca
+#define DESCRIPTION     Tiny Whale
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* MinOrca PCB default pin-out */
+#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/minorca/keymaps/default/Makefile b/keyboards/minorca/keymaps/default/Makefile
new file mode 100644
index 0000000000..8dc851fddf
--- /dev/null
+++ b/keyboards/minorca/keymaps/default/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/minorca/keymaps/default/config.h b/keyboards/minorca/keymaps/default/config.h
new file mode 100644
index 0000000000..bf40376c19
--- /dev/null
+++ b/keyboards/minorca/keymaps/default/config.h
@@ -0,0 +1,12 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* bootmagic salt key */
+#define BOOTMAGIC_KEY_SALT              KC_ESC
+
+/* skip bootmagic and eeconfig */
+#define BOOTMAGIC_KEY_SKIP              KC_SPACE
+
+#endif
diff --git a/keyboards/minorca/keymaps/default/keymap.c b/keyboards/minorca/keymaps/default/keymap.c
new file mode 100644
index 0000000000..a55d578e44
--- /dev/null
+++ b/keyboards/minorca/keymaps/default/keymap.c
@@ -0,0 +1,44 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "minorca.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = { /* Base */
+        {KC_ESC,  KC_Q,    KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+        {KC_TAB,  KC_A,    KC_S,     KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    XXXXXXX, KC_ENT  },
+        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_QUOT, KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, KC_SPC,  XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, KC_DOT,  KC_SLSH, KC_NO }
+    },
+    [1] = { /* First */
+        {KC_GRV,  KC_1,    KC_2,     KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELT },
+        {KC_TAB,  KC_MPRV, KC_MPLY,  KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI  },
+        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_PGDN, KC_END,  KC_L,    KC_SCLN, KC_UP,   KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
+    },
+    [2] = { /* Second */
+        {KC_ESC,  KC_EXLM, KC_AT,    KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
+        {KC_TAB,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT  },
+        {KC_CAPS, XXXXXXX, KC_LSFT,  KC_RSFT, KC_PAUSE,KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_UP,   KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
+    },
+}; 
+ 
+const uint16_t PROGMEM fn_actions[] = {
+	    [0] = ACTION_LAYER_MOMENTARY(1),  // to First overlay
+	    [1] = ACTION_LAYER_MOMENTARY(2),  // to Second overlay
+
+};
\ No newline at end of file
diff --git a/keyboards/minorca/keymaps/default/readme.md b/keyboards/minorca/keymaps/default/readme.md
new file mode 100644
index 0000000000..6ed31f82b3
--- /dev/null
+++ b/keyboards/minorca/keymaps/default/readme.md
@@ -0,0 +1,5 @@
+# The Default Minorca Layout
+
+Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c
+
+It looks incomplete.
\ No newline at end of file
diff --git a/keyboards/minorca/keymaps/readme.md b/keyboards/minorca/keymaps/readme.md
new file mode 100644
index 0000000000..54fb5f6d9e
--- /dev/null
+++ b/keyboards/minorca/keymaps/readme.md
@@ -0,0 +1,23 @@
+# How to add your own keymap
+
+Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
+
+    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
+
+\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
+
+and contain the following files:
+
+* `keymap.c`
+* `readme.md` *recommended*
+* `config.h` *optional*, found automatically when compiling
+* `Makefile` *optional*, found automatically when compling
+
+When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
+
+     * **folder_name** description
+
+# List of Planck keymaps
+
+* **default** default Planck layout
+* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file
diff --git a/keyboards/minorca/keymaps/rgb/Makefile b/keyboards/minorca/keymaps/rgb/Makefile
new file mode 100644
index 0000000000..230f75a628
--- /dev/null
+++ b/keyboards/minorca/keymaps/rgb/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/minorca/keymaps/rgb/config.h b/keyboards/minorca/keymaps/rgb/config.h
new file mode 100644
index 0000000000..deaac2e26f
--- /dev/null
+++ b/keyboards/minorca/keymaps/rgb/config.h
@@ -0,0 +1,20 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* bootmagic salt key */
+#define BOOTMAGIC_KEY_SALT              KC_ESC
+
+/* skip bootmagic and eeconfig */
+#define BOOTMAGIC_KEY_SKIP              KC_SPACE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D5
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 13     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
diff --git a/keyboards/minorca/keymaps/rgb/example.jpg b/keyboards/minorca/keymaps/rgb/example.jpg
new file mode 100644
index 0000000000..a04c8d37d6
Binary files /dev/null and b/keyboards/minorca/keymaps/rgb/example.jpg differ
diff --git a/keyboards/minorca/keymaps/rgb/keymap.c b/keyboards/minorca/keymaps/rgb/keymap.c
new file mode 100644
index 0000000000..9002afbb88
--- /dev/null
+++ b/keyboards/minorca/keymaps/rgb/keymap.c
@@ -0,0 +1,65 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "minorca.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _TB 3
+
+// Macro name shortcuts
+#define QWERTY M(_QWERTY)
+#define LOWER M(_LOWER)
+#define RAISE M(_RAISE)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = { /* Qwerty */
+  {KC_ESC,     KC_Q,       KC_W,       KC_E,       KC_R,     KC_T,    KC_Y,     KC_U,       KC_I,       KC_O,       KC_P,       KC_BSPC},
+  {FUNC(0),    KC_A,       KC_S,       KC_D,       KC_F,     KC_G,    KC_H,     KC_J,       KC_K,       KC_L,       XXXXXXX,    KC_QUOT},
+  {KC_LSFT,    XXXXXXX,    KC_Z,       KC_X,       KC_C,     KC_V,    KC_B,     KC_N,       KC_M,       KC_COMM,    KC_DOT,     FUNC(1)},
+  {KC_LCTL,    XXXXXXX,    KC_LGUI,    KC_LALT,    FUNC(2),  XXXXXXX, XXXXXXX,  FUNC(3),    XXXXXXX,    KC_RALT,    KC_APP,     KC_RCTL}
+},
+
+[_RAISE] = {
+  {S(KC_GRV),  S(KC_1),    S(KC_2),    S(KC_3),    S(KC_4),  S(KC_5), S(KC_6),  S(KC_7),    S(KC_8),    S(KC_9),    S(KC_0),    KC_BSPC},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PAUSE,   KC_TRNS,  KC_TRNS, KC_TRNS,  S(KC_MINS), S(KC_EQL),  S(KC_LBRC), XXXXXXX,    S(KC_BSLS)},
+  {KC_TRNS,    XXXXXXX,    KC_F1,      KC_F2,      KC_F3,    KC_F4,   KC_F5,    KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_ENT},
+  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_MNXT,    KC_MUTE,    KC_MPLY}
+},
+
+[_LOWER] = {
+  {KC_GRV,     KC_1,       KC_2,       KC_3,       KC_4,     KC_5,    KC_6,     KC_7,       KC_8,       KC_9,       KC_0,       KC_DELETE},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_MINS,    KC_EQL,     KC_LBRC,    XXXXXXX,    KC_BSLS},
+  {KC_TRNS,    XXXXXXX,    KC_F11,     KC_F12,     KC_F13,   KC_F14,  KC_F15,   KC_F16,     KC_F17,     KC_F18,     KC_PGUP,    KC_ENT},
+  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_HOME,    KC_PGDN,    KC_END}
+},
+
+[_TB] = { /* Tab */
+  {KC_ESC,     KC_CALC,    KC_WHOM,    KC_MAIL,    KC_MYCM,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PSCR,    KC_TRNS},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    XXXXXXX,    KC_TRNS},
+  {KC_TRNS,    XXXXXXX,    RGB_TOG,    RGB_MOD,    RGB_HUI,  RGB_HUD, RGB_SAI,  RGB_SAD,    RGB_VAI,    RGB_VAD,    KC_UP,      KC_ENT},
+  {BL_STEP,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_LEFT,    KC_DOWN,    KC_RGHT}
+}
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_LAYER_TAP_KEY(_TB, KC_TAB),
+  [1]  = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+  [2]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
+  [3]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
+};
diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md
new file mode 100644
index 0000000000..50806068ce
--- /dev/null
+++ b/keyboards/minorca/keymaps/rgb/readme.md
@@ -0,0 +1,23 @@
+#RGB backlight for MinOrca
+
+![wiring](example.jpg)
+
+Exmaple of adding WS2812b LEDs to a MinOrca.
+
+http://www.40percent.club/2016/08/tiny-whale.html
+
+The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. 
+
+Tab + Z		Toggle on/off
+Tab + X		Mode
+Tab + C		Hue+
+Tab + V		Hue-
+Tab + B		Saturation+
+Tab + N		Saturation-
+Tab + M		Brightness+
+Tab + ,		Brightness-
+
+Example wiring:
+
+![wiring](wiring1.jpg)
+![wiring closeup](wiring2.jpg)
diff --git a/keyboards/minorca/keymaps/rgb/wiring1.jpg b/keyboards/minorca/keymaps/rgb/wiring1.jpg
new file mode 100644
index 0000000000..7dcbe80c5e
Binary files /dev/null and b/keyboards/minorca/keymaps/rgb/wiring1.jpg differ
diff --git a/keyboards/minorca/keymaps/rgb/wiring2.jpg b/keyboards/minorca/keymaps/rgb/wiring2.jpg
new file mode 100644
index 0000000000..fd91d3e1c9
Binary files /dev/null and b/keyboards/minorca/keymaps/rgb/wiring2.jpg differ
diff --git a/keyboards/minorca/minorca.c b/keyboards/minorca/minorca.c
new file mode 100644
index 0000000000..24e72c2a5c
--- /dev/null
+++ b/keyboards/minorca/minorca.c
@@ -0,0 +1,6 @@
+#include "minorca.h"
+
+void matrix_init_kb(void) {
+
+	matrix_init_user();
+}
\ No newline at end of file
diff --git a/keyboards/minorca/minorca.h b/keyboards/minorca/minorca.h
new file mode 100644
index 0000000000..158e5b4c55
--- /dev/null
+++ b/keyboards/minorca/minorca.h
@@ -0,0 +1,6 @@
+#ifndef MINORCA_H
+#define MINORCA_H
+
+#include "quantum.h"
+
+#endif
diff --git a/keyboards/minorca/readme.md b/keyboards/minorca/readme.md
new file mode 100644
index 0000000000..1d655dfe48
--- /dev/null
+++ b/keyboards/minorca/readme.md
@@ -0,0 +1,31 @@
+minorca keyboard firmware
+======================
+Handwired 40% keyboard
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
+
+### Notable forks (which some of the keymap files are from)
+- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
+- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
+- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
+- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
-- 
cgit v1.2.3


From dde9ee572cf01609aaebbc6cbe1f326e7f89b7f4 Mon Sep 17 00:00:00 2001
From: di0ib <di0ib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:06:46 -1000
Subject: clean up readnme

---
 keyboards/minorca/keymaps/rgb/readme.md | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md
index 50806068ce..051ffe3c64 100644
--- a/keyboards/minorca/keymaps/rgb/readme.md
+++ b/keyboards/minorca/keymaps/rgb/readme.md
@@ -8,16 +8,18 @@ http://www.40percent.club/2016/08/tiny-whale.html
 
 The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. 
 
-Tab + Z		Toggle on/off
-Tab + X		Mode
-Tab + C		Hue+
-Tab + V		Hue-
-Tab + B		Saturation+
-Tab + N		Saturation-
-Tab + M		Brightness+
-Tab + ,		Brightness-
+*Tab + Z		Toggle on/off
+*Tab + X		Mode
+*Tab + C		Hue+
+*Tab + V		Hue-
+*Tab + B		Saturation+
+*Tab + N		Saturation-
+*Tab + M		Brightness+
+*Tab + ,		Brightness-
 
 Example wiring:
 
+WS2812 data pin is connected to D2
+
 ![wiring](wiring1.jpg)
 ![wiring closeup](wiring2.jpg)
-- 
cgit v1.2.3


From 65060ad000930b4d735760cd8951ae0f462d5f14 Mon Sep 17 00:00:00 2001
From: di0ib <di0ib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:07:35 -1000
Subject: Fix list

---
 keyboards/minorca/keymaps/rgb/readme.md | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md
index 051ffe3c64..00b6d6cd8c 100644
--- a/keyboards/minorca/keymaps/rgb/readme.md
+++ b/keyboards/minorca/keymaps/rgb/readme.md
@@ -2,20 +2,20 @@
 
 ![wiring](example.jpg)
 
-Exmaple of adding WS2812b LEDs to a MinOrca.
+Example of adding WS2812b LEDs to a MinOrca.
 
 http://www.40percent.club/2016/08/tiny-whale.html
 
 The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. 
 
-*Tab + Z		Toggle on/off
-*Tab + X		Mode
-*Tab + C		Hue+
-*Tab + V		Hue-
-*Tab + B		Saturation+
-*Tab + N		Saturation-
-*Tab + M		Brightness+
-*Tab + ,		Brightness-
+* Tab + Z		Toggle on/off
+* Tab + X		Mode
+* Tab + C		Hue+
+* Tab + V		Hue-
+* Tab + B		Saturation+
+* Tab + N		Saturation-
+* Tab + M		Brightness+
+* Tab + ,		Brightness-
 
 Example wiring:
 
-- 
cgit v1.2.3


From 1eaa685872745d3ae01afb79bad8f25a4fd1029d Mon Sep 17 00:00:00 2001
From: di0ib <di0ib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:08:15 -1000
Subject: Correct data pin to D5

---
 keyboards/minorca/keymaps/rgb/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md
index 00b6d6cd8c..f50dfa546f 100644
--- a/keyboards/minorca/keymaps/rgb/readme.md
+++ b/keyboards/minorca/keymaps/rgb/readme.md
@@ -19,7 +19,7 @@ The keymap is a work in progress. The RGB functions are accessed by holding down
 
 Example wiring:
 
-WS2812 data pin is connected to D2
+WS2812 data pin is connected to D5
 
 ![wiring](wiring1.jpg)
 ![wiring closeup](wiring2.jpg)
-- 
cgit v1.2.3


From f58a67c991fa15f6177ebb9ec74e831b851bb38e Mon Sep 17 00:00:00 2001
From: di0ib <di0ib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:10:12 -1000
Subject: cleanup readme

---
 keyboards/minorca/keymaps/readme.md | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/minorca/keymaps/readme.md b/keyboards/minorca/keymaps/readme.md
index 54fb5f6d9e..058923ba25 100644
--- a/keyboards/minorca/keymaps/readme.md
+++ b/keyboards/minorca/keymaps/readme.md
@@ -17,7 +17,7 @@ When adding your keymap to this list, keep it organised alphabetically (select l
 
      * **folder_name** description
 
-# List of Planck keymaps
+# List of Minorca keymaps
 
-* **default** default Planck layout
-* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file
+* **default** default Minorca layout
+* **rgb** layout with WS2812b control
-- 
cgit v1.2.3


From 503ec7f9f6f9c15049f02c3753afdfe2d0db629b Mon Sep 17 00:00:00 2001
From: di0ib <di0ib@users.noreply.github.com>
Date: Sun, 14 Aug 2016 11:15:46 -1000
Subject: Updated readme

Added link to Minorca/Sebright blog.
---
 keyboards/minorca/readme.md | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/minorca/readme.md b/keyboards/minorca/readme.md
index 1d655dfe48..93c767954d 100644
--- a/keyboards/minorca/readme.md
+++ b/keyboards/minorca/readme.md
@@ -2,6 +2,8 @@ minorca keyboard firmware
 ======================
 Handwired 40% keyboard
 
+http://www.panc.co/blog/minorcasebright-information-page
+
 ## Quantum MK Firmware
 
 For the full Quantum feature list, see [the parent readme.md](/readme.md).
-- 
cgit v1.2.3


From 959c48e146ec3c2192e8d261d78d27b80342ad30 Mon Sep 17 00:00:00 2001
From: di0ib <git@porkhash.net>
Date: Sun, 14 Aug 2016 14:13:58 -1000
Subject: moved to handwired folder

---
 keyboards/handwired/minorca/Makefile               |  71 ++++++++++++++++++
 keyboards/handwired/minorca/config.h               |  80 +++++++++++++++++++++
 .../handwired/minorca/keymaps/default/Makefile     |  25 +++++++
 .../handwired/minorca/keymaps/default/config.h     |  12 ++++
 .../handwired/minorca/keymaps/default/keymap.c     |  44 ++++++++++++
 .../handwired/minorca/keymaps/default/readme.md    |   5 ++
 keyboards/handwired/minorca/keymaps/readme.md      |  23 ++++++
 keyboards/handwired/minorca/keymaps/rgb/Makefile   |  25 +++++++
 keyboards/handwired/minorca/keymaps/rgb/config.h   |  20 ++++++
 .../handwired/minorca/keymaps/rgb/example.jpg      | Bin 0 -> 72737 bytes
 keyboards/handwired/minorca/keymaps/rgb/keymap.c   |  65 +++++++++++++++++
 keyboards/handwired/minorca/keymaps/rgb/readme.md  |  25 +++++++
 .../handwired/minorca/keymaps/rgb/wiring1.jpg      | Bin 0 -> 119547 bytes
 .../handwired/minorca/keymaps/rgb/wiring2.jpg      | Bin 0 -> 94987 bytes
 keyboards/handwired/minorca/minorca.c              |   6 ++
 keyboards/handwired/minorca/minorca.h              |   6 ++
 keyboards/handwired/minorca/readme.md              |  33 +++++++++
 keyboards/minorca/Makefile                         |  71 ------------------
 keyboards/minorca/config.h                         |  80 ---------------------
 keyboards/minorca/keymaps/default/Makefile         |  25 -------
 keyboards/minorca/keymaps/default/config.h         |  12 ----
 keyboards/minorca/keymaps/default/keymap.c         |  44 ------------
 keyboards/minorca/keymaps/default/readme.md        |   5 --
 keyboards/minorca/keymaps/readme.md                |  23 ------
 keyboards/minorca/keymaps/rgb/Makefile             |  25 -------
 keyboards/minorca/keymaps/rgb/config.h             |  20 ------
 keyboards/minorca/keymaps/rgb/example.jpg          | Bin 72737 -> 0 bytes
 keyboards/minorca/keymaps/rgb/keymap.c             |  65 -----------------
 keyboards/minorca/keymaps/rgb/readme.md            |  25 -------
 keyboards/minorca/keymaps/rgb/wiring1.jpg          | Bin 119547 -> 0 bytes
 keyboards/minorca/keymaps/rgb/wiring2.jpg          | Bin 94987 -> 0 bytes
 keyboards/minorca/minorca.c                        |   6 --
 keyboards/minorca/minorca.h                        |   6 --
 keyboards/minorca/readme.md                        |  33 ---------
 34 files changed, 440 insertions(+), 440 deletions(-)
 create mode 100644 keyboards/handwired/minorca/Makefile
 create mode 100644 keyboards/handwired/minorca/config.h
 create mode 100644 keyboards/handwired/minorca/keymaps/default/Makefile
 create mode 100644 keyboards/handwired/minorca/keymaps/default/config.h
 create mode 100644 keyboards/handwired/minorca/keymaps/default/keymap.c
 create mode 100644 keyboards/handwired/minorca/keymaps/default/readme.md
 create mode 100644 keyboards/handwired/minorca/keymaps/readme.md
 create mode 100644 keyboards/handwired/minorca/keymaps/rgb/Makefile
 create mode 100644 keyboards/handwired/minorca/keymaps/rgb/config.h
 create mode 100644 keyboards/handwired/minorca/keymaps/rgb/example.jpg
 create mode 100644 keyboards/handwired/minorca/keymaps/rgb/keymap.c
 create mode 100644 keyboards/handwired/minorca/keymaps/rgb/readme.md
 create mode 100644 keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg
 create mode 100644 keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg
 create mode 100644 keyboards/handwired/minorca/minorca.c
 create mode 100644 keyboards/handwired/minorca/minorca.h
 create mode 100644 keyboards/handwired/minorca/readme.md
 delete mode 100644 keyboards/minorca/Makefile
 delete mode 100644 keyboards/minorca/config.h
 delete mode 100644 keyboards/minorca/keymaps/default/Makefile
 delete mode 100644 keyboards/minorca/keymaps/default/config.h
 delete mode 100644 keyboards/minorca/keymaps/default/keymap.c
 delete mode 100644 keyboards/minorca/keymaps/default/readme.md
 delete mode 100644 keyboards/minorca/keymaps/readme.md
 delete mode 100644 keyboards/minorca/keymaps/rgb/Makefile
 delete mode 100644 keyboards/minorca/keymaps/rgb/config.h
 delete mode 100644 keyboards/minorca/keymaps/rgb/example.jpg
 delete mode 100644 keyboards/minorca/keymaps/rgb/keymap.c
 delete mode 100644 keyboards/minorca/keymaps/rgb/readme.md
 delete mode 100644 keyboards/minorca/keymaps/rgb/wiring1.jpg
 delete mode 100644 keyboards/minorca/keymaps/rgb/wiring2.jpg
 delete mode 100644 keyboards/minorca/minorca.c
 delete mode 100644 keyboards/minorca/minorca.h
 delete mode 100644 keyboards/minorca/readme.md

(limited to 'keyboards')

diff --git a/keyboards/handwired/minorca/Makefile b/keyboards/handwired/minorca/Makefile
new file mode 100644
index 0000000000..155c1f9a29
--- /dev/null
+++ b/keyboards/handwired/minorca/Makefile
@@ -0,0 +1,71 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/minorca/config.h b/keyboards/handwired/minorca/config.h
new file mode 100644
index 0000000000..4cdafcbd2e
--- /dev/null
+++ b/keyboards/handwired/minorca/config.h
@@ -0,0 +1,80 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6660
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ME
+#define PRODUCT         MinOrca
+#define DESCRIPTION     Tiny Whale
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* MinOrca PCB default pin-out */
+#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/minorca/keymaps/default/Makefile b/keyboards/handwired/minorca/keymaps/default/Makefile
new file mode 100644
index 0000000000..a573488a5e
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/default/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../../Makefile
+endif
diff --git a/keyboards/handwired/minorca/keymaps/default/config.h b/keyboards/handwired/minorca/keymaps/default/config.h
new file mode 100644
index 0000000000..bf40376c19
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/default/config.h
@@ -0,0 +1,12 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* bootmagic salt key */
+#define BOOTMAGIC_KEY_SALT              KC_ESC
+
+/* skip bootmagic and eeconfig */
+#define BOOTMAGIC_KEY_SKIP              KC_SPACE
+
+#endif
diff --git a/keyboards/handwired/minorca/keymaps/default/keymap.c b/keyboards/handwired/minorca/keymaps/default/keymap.c
new file mode 100644
index 0000000000..a55d578e44
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/default/keymap.c
@@ -0,0 +1,44 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "minorca.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = { /* Base */
+        {KC_ESC,  KC_Q,    KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+        {KC_TAB,  KC_A,    KC_S,     KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    XXXXXXX, KC_ENT  },
+        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_QUOT, KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, KC_SPC,  XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, KC_DOT,  KC_SLSH, KC_NO }
+    },
+    [1] = { /* First */
+        {KC_GRV,  KC_1,    KC_2,     KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELT },
+        {KC_TAB,  KC_MPRV, KC_MPLY,  KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI  },
+        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_PGDN, KC_END,  KC_L,    KC_SCLN, KC_UP,   KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
+    },
+    [2] = { /* Second */
+        {KC_ESC,  KC_EXLM, KC_AT,    KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
+        {KC_TAB,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT  },
+        {KC_CAPS, XXXXXXX, KC_LSFT,  KC_RSFT, KC_PAUSE,KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_UP,   KC_FN1,  KC_FN0 },
+        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
+    },
+}; 
+ 
+const uint16_t PROGMEM fn_actions[] = {
+	    [0] = ACTION_LAYER_MOMENTARY(1),  // to First overlay
+	    [1] = ACTION_LAYER_MOMENTARY(2),  // to Second overlay
+
+};
\ No newline at end of file
diff --git a/keyboards/handwired/minorca/keymaps/default/readme.md b/keyboards/handwired/minorca/keymaps/default/readme.md
new file mode 100644
index 0000000000..6ed31f82b3
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/default/readme.md
@@ -0,0 +1,5 @@
+# The Default Minorca Layout
+
+Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c
+
+It looks incomplete.
\ No newline at end of file
diff --git a/keyboards/handwired/minorca/keymaps/readme.md b/keyboards/handwired/minorca/keymaps/readme.md
new file mode 100644
index 0000000000..058923ba25
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/readme.md
@@ -0,0 +1,23 @@
+# How to add your own keymap
+
+Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
+
+    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
+
+\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
+
+and contain the following files:
+
+* `keymap.c`
+* `readme.md` *recommended*
+* `config.h` *optional*, found automatically when compiling
+* `Makefile` *optional*, found automatically when compling
+
+When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
+
+     * **folder_name** description
+
+# List of Minorca keymaps
+
+* **default** default Minorca layout
+* **rgb** layout with WS2812b control
diff --git a/keyboards/handwired/minorca/keymaps/rgb/Makefile b/keyboards/handwired/minorca/keymaps/rgb/Makefile
new file mode 100644
index 0000000000..2b2af13358
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/rgb/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../../Makefile
+endif
diff --git a/keyboards/handwired/minorca/keymaps/rgb/config.h b/keyboards/handwired/minorca/keymaps/rgb/config.h
new file mode 100644
index 0000000000..deaac2e26f
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/rgb/config.h
@@ -0,0 +1,20 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* bootmagic salt key */
+#define BOOTMAGIC_KEY_SALT              KC_ESC
+
+/* skip bootmagic and eeconfig */
+#define BOOTMAGIC_KEY_SKIP              KC_SPACE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D5
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 13     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
diff --git a/keyboards/handwired/minorca/keymaps/rgb/example.jpg b/keyboards/handwired/minorca/keymaps/rgb/example.jpg
new file mode 100644
index 0000000000..a04c8d37d6
Binary files /dev/null and b/keyboards/handwired/minorca/keymaps/rgb/example.jpg differ
diff --git a/keyboards/handwired/minorca/keymaps/rgb/keymap.c b/keyboards/handwired/minorca/keymaps/rgb/keymap.c
new file mode 100644
index 0000000000..9002afbb88
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/rgb/keymap.c
@@ -0,0 +1,65 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "minorca.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _TB 3
+
+// Macro name shortcuts
+#define QWERTY M(_QWERTY)
+#define LOWER M(_LOWER)
+#define RAISE M(_RAISE)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = { /* Qwerty */
+  {KC_ESC,     KC_Q,       KC_W,       KC_E,       KC_R,     KC_T,    KC_Y,     KC_U,       KC_I,       KC_O,       KC_P,       KC_BSPC},
+  {FUNC(0),    KC_A,       KC_S,       KC_D,       KC_F,     KC_G,    KC_H,     KC_J,       KC_K,       KC_L,       XXXXXXX,    KC_QUOT},
+  {KC_LSFT,    XXXXXXX,    KC_Z,       KC_X,       KC_C,     KC_V,    KC_B,     KC_N,       KC_M,       KC_COMM,    KC_DOT,     FUNC(1)},
+  {KC_LCTL,    XXXXXXX,    KC_LGUI,    KC_LALT,    FUNC(2),  XXXXXXX, XXXXXXX,  FUNC(3),    XXXXXXX,    KC_RALT,    KC_APP,     KC_RCTL}
+},
+
+[_RAISE] = {
+  {S(KC_GRV),  S(KC_1),    S(KC_2),    S(KC_3),    S(KC_4),  S(KC_5), S(KC_6),  S(KC_7),    S(KC_8),    S(KC_9),    S(KC_0),    KC_BSPC},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PAUSE,   KC_TRNS,  KC_TRNS, KC_TRNS,  S(KC_MINS), S(KC_EQL),  S(KC_LBRC), XXXXXXX,    S(KC_BSLS)},
+  {KC_TRNS,    XXXXXXX,    KC_F1,      KC_F2,      KC_F3,    KC_F4,   KC_F5,    KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_ENT},
+  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_MNXT,    KC_MUTE,    KC_MPLY}
+},
+
+[_LOWER] = {
+  {KC_GRV,     KC_1,       KC_2,       KC_3,       KC_4,     KC_5,    KC_6,     KC_7,       KC_8,       KC_9,       KC_0,       KC_DELETE},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_MINS,    KC_EQL,     KC_LBRC,    XXXXXXX,    KC_BSLS},
+  {KC_TRNS,    XXXXXXX,    KC_F11,     KC_F12,     KC_F13,   KC_F14,  KC_F15,   KC_F16,     KC_F17,     KC_F18,     KC_PGUP,    KC_ENT},
+  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_HOME,    KC_PGDN,    KC_END}
+},
+
+[_TB] = { /* Tab */
+  {KC_ESC,     KC_CALC,    KC_WHOM,    KC_MAIL,    KC_MYCM,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PSCR,    KC_TRNS},
+  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    XXXXXXX,    KC_TRNS},
+  {KC_TRNS,    XXXXXXX,    RGB_TOG,    RGB_MOD,    RGB_HUI,  RGB_HUD, RGB_SAI,  RGB_SAD,    RGB_VAI,    RGB_VAD,    KC_UP,      KC_ENT},
+  {BL_STEP,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_LEFT,    KC_DOWN,    KC_RGHT}
+}
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_LAYER_TAP_KEY(_TB, KC_TAB),
+  [1]  = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+  [2]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
+  [3]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
+};
diff --git a/keyboards/handwired/minorca/keymaps/rgb/readme.md b/keyboards/handwired/minorca/keymaps/rgb/readme.md
new file mode 100644
index 0000000000..f50dfa546f
--- /dev/null
+++ b/keyboards/handwired/minorca/keymaps/rgb/readme.md
@@ -0,0 +1,25 @@
+#RGB backlight for MinOrca
+
+![wiring](example.jpg)
+
+Example of adding WS2812b LEDs to a MinOrca.
+
+http://www.40percent.club/2016/08/tiny-whale.html
+
+The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. 
+
+* Tab + Z		Toggle on/off
+* Tab + X		Mode
+* Tab + C		Hue+
+* Tab + V		Hue-
+* Tab + B		Saturation+
+* Tab + N		Saturation-
+* Tab + M		Brightness+
+* Tab + ,		Brightness-
+
+Example wiring:
+
+WS2812 data pin is connected to D5
+
+![wiring](wiring1.jpg)
+![wiring closeup](wiring2.jpg)
diff --git a/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg b/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg
new file mode 100644
index 0000000000..7dcbe80c5e
Binary files /dev/null and b/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg differ
diff --git a/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg b/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg
new file mode 100644
index 0000000000..fd91d3e1c9
Binary files /dev/null and b/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg differ
diff --git a/keyboards/handwired/minorca/minorca.c b/keyboards/handwired/minorca/minorca.c
new file mode 100644
index 0000000000..24e72c2a5c
--- /dev/null
+++ b/keyboards/handwired/minorca/minorca.c
@@ -0,0 +1,6 @@
+#include "minorca.h"
+
+void matrix_init_kb(void) {
+
+	matrix_init_user();
+}
\ No newline at end of file
diff --git a/keyboards/handwired/minorca/minorca.h b/keyboards/handwired/minorca/minorca.h
new file mode 100644
index 0000000000..158e5b4c55
--- /dev/null
+++ b/keyboards/handwired/minorca/minorca.h
@@ -0,0 +1,6 @@
+#ifndef MINORCA_H
+#define MINORCA_H
+
+#include "quantum.h"
+
+#endif
diff --git a/keyboards/handwired/minorca/readme.md b/keyboards/handwired/minorca/readme.md
new file mode 100644
index 0000000000..93c767954d
--- /dev/null
+++ b/keyboards/handwired/minorca/readme.md
@@ -0,0 +1,33 @@
+minorca keyboard firmware
+======================
+Handwired 40% keyboard
+
+http://www.panc.co/blog/minorcasebright-information-page
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
+
+### Notable forks (which some of the keymap files are from)
+- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
+- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
+- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
+- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
diff --git a/keyboards/minorca/Makefile b/keyboards/minorca/Makefile
deleted file mode 100644
index 8cff000493..0000000000
--- a/keyboards/minorca/Makefile
+++ /dev/null
@@ -1,71 +0,0 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/minorca/config.h b/keyboards/minorca/config.h
deleted file mode 100644
index 4cdafcbd2e..0000000000
--- a/keyboards/minorca/config.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6660
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    ME
-#define PRODUCT         MinOrca
-#define DESCRIPTION     Tiny Whale
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/* MinOrca PCB default pin-out */
-#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
-#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/minorca/keymaps/default/Makefile b/keyboards/minorca/keymaps/default/Makefile
deleted file mode 100644
index 8dc851fddf..0000000000
--- a/keyboards/minorca/keymaps/default/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/minorca/keymaps/default/config.h b/keyboards/minorca/keymaps/default/config.h
deleted file mode 100644
index bf40376c19..0000000000
--- a/keyboards/minorca/keymaps/default/config.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/* bootmagic salt key */
-#define BOOTMAGIC_KEY_SALT              KC_ESC
-
-/* skip bootmagic and eeconfig */
-#define BOOTMAGIC_KEY_SKIP              KC_SPACE
-
-#endif
diff --git a/keyboards/minorca/keymaps/default/keymap.c b/keyboards/minorca/keymaps/default/keymap.c
deleted file mode 100644
index a55d578e44..0000000000
--- a/keyboards/minorca/keymaps/default/keymap.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-#include "minorca.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = { /* Base */
-        {KC_ESC,  KC_Q,    KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
-        {KC_TAB,  KC_A,    KC_S,     KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    XXXXXXX, KC_ENT  },
-        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_QUOT, KC_FN1,  KC_FN0 },
-        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, KC_SPC,  XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, KC_DOT,  KC_SLSH, KC_NO }
-    },
-    [1] = { /* First */
-        {KC_GRV,  KC_1,    KC_2,     KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELT },
-        {KC_TAB,  KC_MPRV, KC_MPLY,  KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI  },
-        {KC_LCTRL,XXXXXXX, KC_Z,     KC_X,    KC_C,    KC_PGDN, KC_END,  KC_L,    KC_SCLN, KC_UP,   KC_FN1,  KC_FN0 },
-        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
-    },
-    [2] = { /* Second */
-        {KC_ESC,  KC_EXLM, KC_AT,    KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
-        {KC_TAB,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT  },
-        {KC_CAPS, XXXXXXX, KC_LSFT,  KC_RSFT, KC_PAUSE,KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_UP,   KC_FN1,  KC_FN0 },
-        {KC_NO,   XXXXXXX, KC_NO,    KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO }
-    },
-}; 
- 
-const uint16_t PROGMEM fn_actions[] = {
-	    [0] = ACTION_LAYER_MOMENTARY(1),  // to First overlay
-	    [1] = ACTION_LAYER_MOMENTARY(2),  // to Second overlay
-
-};
\ No newline at end of file
diff --git a/keyboards/minorca/keymaps/default/readme.md b/keyboards/minorca/keymaps/default/readme.md
deleted file mode 100644
index 6ed31f82b3..0000000000
--- a/keyboards/minorca/keymaps/default/readme.md
+++ /dev/null
@@ -1,5 +0,0 @@
-# The Default Minorca Layout
-
-Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c
-
-It looks incomplete.
\ No newline at end of file
diff --git a/keyboards/minorca/keymaps/readme.md b/keyboards/minorca/keymaps/readme.md
deleted file mode 100644
index 058923ba25..0000000000
--- a/keyboards/minorca/keymaps/readme.md
+++ /dev/null
@@ -1,23 +0,0 @@
-# How to add your own keymap
-
-Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
-
-    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
-
-\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
-
-and contain the following files:
-
-* `keymap.c`
-* `readme.md` *recommended*
-* `config.h` *optional*, found automatically when compiling
-* `Makefile` *optional*, found automatically when compling
-
-When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
-
-     * **folder_name** description
-
-# List of Minorca keymaps
-
-* **default** default Minorca layout
-* **rgb** layout with WS2812b control
diff --git a/keyboards/minorca/keymaps/rgb/Makefile b/keyboards/minorca/keymaps/rgb/Makefile
deleted file mode 100644
index 230f75a628..0000000000
--- a/keyboards/minorca/keymaps/rgb/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/minorca/keymaps/rgb/config.h b/keyboards/minorca/keymaps/rgb/config.h
deleted file mode 100644
index deaac2e26f..0000000000
--- a/keyboards/minorca/keymaps/rgb/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/* bootmagic salt key */
-#define BOOTMAGIC_KEY_SALT              KC_ESC
-
-/* skip bootmagic and eeconfig */
-#define BOOTMAGIC_KEY_SKIP              KC_SPACE
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D5
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 13     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
-#endif
diff --git a/keyboards/minorca/keymaps/rgb/example.jpg b/keyboards/minorca/keymaps/rgb/example.jpg
deleted file mode 100644
index a04c8d37d6..0000000000
Binary files a/keyboards/minorca/keymaps/rgb/example.jpg and /dev/null differ
diff --git a/keyboards/minorca/keymaps/rgb/keymap.c b/keyboards/minorca/keymaps/rgb/keymap.c
deleted file mode 100644
index 9002afbb88..0000000000
--- a/keyboards/minorca/keymaps/rgb/keymap.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-#include "minorca.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _TB 3
-
-// Macro name shortcuts
-#define QWERTY M(_QWERTY)
-#define LOWER M(_LOWER)
-#define RAISE M(_RAISE)
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_QWERTY] = { /* Qwerty */
-  {KC_ESC,     KC_Q,       KC_W,       KC_E,       KC_R,     KC_T,    KC_Y,     KC_U,       KC_I,       KC_O,       KC_P,       KC_BSPC},
-  {FUNC(0),    KC_A,       KC_S,       KC_D,       KC_F,     KC_G,    KC_H,     KC_J,       KC_K,       KC_L,       XXXXXXX,    KC_QUOT},
-  {KC_LSFT,    XXXXXXX,    KC_Z,       KC_X,       KC_C,     KC_V,    KC_B,     KC_N,       KC_M,       KC_COMM,    KC_DOT,     FUNC(1)},
-  {KC_LCTL,    XXXXXXX,    KC_LGUI,    KC_LALT,    FUNC(2),  XXXXXXX, XXXXXXX,  FUNC(3),    XXXXXXX,    KC_RALT,    KC_APP,     KC_RCTL}
-},
-
-[_RAISE] = {
-  {S(KC_GRV),  S(KC_1),    S(KC_2),    S(KC_3),    S(KC_4),  S(KC_5), S(KC_6),  S(KC_7),    S(KC_8),    S(KC_9),    S(KC_0),    KC_BSPC},
-  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PAUSE,   KC_TRNS,  KC_TRNS, KC_TRNS,  S(KC_MINS), S(KC_EQL),  S(KC_LBRC), XXXXXXX,    S(KC_BSLS)},
-  {KC_TRNS,    XXXXXXX,    KC_F1,      KC_F2,      KC_F3,    KC_F4,   KC_F5,    KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_ENT},
-  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_MNXT,    KC_MUTE,    KC_MPLY}
-},
-
-[_LOWER] = {
-  {KC_GRV,     KC_1,       KC_2,       KC_3,       KC_4,     KC_5,    KC_6,     KC_7,       KC_8,       KC_9,       KC_0,       KC_DELETE},
-  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_MINS,    KC_EQL,     KC_LBRC,    XXXXXXX,    KC_BSLS},
-  {KC_TRNS,    XXXXXXX,    KC_F11,     KC_F12,     KC_F13,   KC_F14,  KC_F15,   KC_F16,     KC_F17,     KC_F18,     KC_PGUP,    KC_ENT},
-  {KC_TRNS,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_HOME,    KC_PGDN,    KC_END}
-},
-
-[_TB] = { /* Tab */
-  {KC_ESC,     KC_CALC,    KC_WHOM,    KC_MAIL,    KC_MYCM,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_PSCR,    KC_TRNS},
-  {KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    XXXXXXX,    KC_TRNS},
-  {KC_TRNS,    XXXXXXX,    RGB_TOG,    RGB_MOD,    RGB_HUI,  RGB_HUD, RGB_SAI,  RGB_SAD,    RGB_VAI,    RGB_VAD,    KC_UP,      KC_ENT},
-  {BL_STEP,    XXXXXXX,    KC_TRNS,    KC_TRNS,    KC_TRNS,  XXXXXXX, XXXXXXX,  KC_TRNS,    XXXXXXX,    KC_LEFT,    KC_DOWN,    KC_RGHT}
-}
-};
-
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_LAYER_TAP_KEY(_TB, KC_TAB),
-  [1]  = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
-  [2]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
-  [3]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
-};
diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md
deleted file mode 100644
index f50dfa546f..0000000000
--- a/keyboards/minorca/keymaps/rgb/readme.md
+++ /dev/null
@@ -1,25 +0,0 @@
-#RGB backlight for MinOrca
-
-![wiring](example.jpg)
-
-Example of adding WS2812b LEDs to a MinOrca.
-
-http://www.40percent.club/2016/08/tiny-whale.html
-
-The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. 
-
-* Tab + Z		Toggle on/off
-* Tab + X		Mode
-* Tab + C		Hue+
-* Tab + V		Hue-
-* Tab + B		Saturation+
-* Tab + N		Saturation-
-* Tab + M		Brightness+
-* Tab + ,		Brightness-
-
-Example wiring:
-
-WS2812 data pin is connected to D5
-
-![wiring](wiring1.jpg)
-![wiring closeup](wiring2.jpg)
diff --git a/keyboards/minorca/keymaps/rgb/wiring1.jpg b/keyboards/minorca/keymaps/rgb/wiring1.jpg
deleted file mode 100644
index 7dcbe80c5e..0000000000
Binary files a/keyboards/minorca/keymaps/rgb/wiring1.jpg and /dev/null differ
diff --git a/keyboards/minorca/keymaps/rgb/wiring2.jpg b/keyboards/minorca/keymaps/rgb/wiring2.jpg
deleted file mode 100644
index fd91d3e1c9..0000000000
Binary files a/keyboards/minorca/keymaps/rgb/wiring2.jpg and /dev/null differ
diff --git a/keyboards/minorca/minorca.c b/keyboards/minorca/minorca.c
deleted file mode 100644
index 24e72c2a5c..0000000000
--- a/keyboards/minorca/minorca.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "minorca.h"
-
-void matrix_init_kb(void) {
-
-	matrix_init_user();
-}
\ No newline at end of file
diff --git a/keyboards/minorca/minorca.h b/keyboards/minorca/minorca.h
deleted file mode 100644
index 158e5b4c55..0000000000
--- a/keyboards/minorca/minorca.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef MINORCA_H
-#define MINORCA_H
-
-#include "quantum.h"
-
-#endif
diff --git a/keyboards/minorca/readme.md b/keyboards/minorca/readme.md
deleted file mode 100644
index 93c767954d..0000000000
--- a/keyboards/minorca/readme.md
+++ /dev/null
@@ -1,33 +0,0 @@
-minorca keyboard firmware
-======================
-Handwired 40% keyboard
-
-http://www.panc.co/blog/minorcasebright-information-page
-
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/readme.md).
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. 
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-To build with the default keymap, simply run `make`.
-
-### Other Keymaps
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
-```
-$ make KEYMAP=[default|jack|<name>]
-```
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
-
-### Notable forks (which some of the keymap files are from)
-- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
-- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
-- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
-- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
-- 
cgit v1.2.3


From 055b887b0dd7f64bf7d134df3e13cbe1f2a069c2 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Sun, 14 Aug 2016 20:25:52 -0700
Subject: Setup the bottom-row modifiers to be mac-like in their arrangement.

---
 keyboards/phantom/keymaps/xyverz/keymap.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c
index aa6af18b1d..4a15226386 100644
--- a/keyboards/phantom/keymaps/xyverz/keymap.c
+++ b/keyboards/phantom/keymaps/xyverz/keymap.c
@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
     {KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
     {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
-    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+    {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT}
   },
 
 [_DV] = { /* Layer 1: Dvorak */
@@ -43,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
     {KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
     {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
-    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+    {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT}
   },
 
 [_CM] = { /* Layer 2: Colemak */
@@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
     {KC_BSPC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
     {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
-    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+    {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT}
   },
 
 [_FL] = { /* Layer 3: Functions */
-- 
cgit v1.2.3


From 8e2d69d5a27adfb3ec1e288e8099a408ac72bc84 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 15 Aug 2016 06:28:39 -0700
Subject: Adding u/treasuredfrog's hack to use LT() with the RAISE and LOWER
 macros.

---
 keyboards/planck/keymaps/xyverz/keymap.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c
index 90529428da..6d10083fee 100644
--- a/keyboards/planck/keymaps/xyverz/keymap.c
+++ b/keyboards/planck/keymaps/xyverz/keymap.c
@@ -27,8 +27,8 @@ enum planck_keycodes {
   COLEMAK,
   DVORAK,
   PLOVER,
-  LOWER,
-  RAISE,
+  LOWER = LT(_LOWER, KC_BSPC),
+  RAISE = LT(_RAISE, KC_ENT),
   BACKLIT,
   EXT_PLV
 };
@@ -89,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_DVORAK] = {
   {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH},
   {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS},
-  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_T(KC_ENT)},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT},
   {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
 },
 
@@ -225,7 +225,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         layer_off(_LOWER);
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
-      return false;
+      //return false;
       break;
     case RAISE:
       if (record->event.pressed) {
@@ -235,7 +235,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         layer_off(_RAISE);
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
-      return false;
+      //return false;
       break;
     case BACKLIT:
       if (record->event.pressed) {
@@ -311,4 +311,4 @@ void music_scale_user(void)
     PLAY_NOTE_ARRAY(music_scale, false, 0);
 }
 
-#endif
\ No newline at end of file
+#endif
-- 
cgit v1.2.3


From 5c5c3e626b7f2e4a5835988c069c7154f347c4ca Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Mon, 15 Aug 2016 06:57:24 -0700
Subject: Adding KC_BSPC to the LT() macro for LOWER resulted in a backspace
 stroke being sent if the LOWER key was used too quickly. Switching back to
 original LOWER macro, but keeping the new RAISE macro.

---
 keyboards/planck/keymaps/xyverz/keymap.c    | 62 +++--------------------------
 keyboards/planck/keymaps/xyverz/makefile.mk |  4 +-
 2 files changed, 7 insertions(+), 59 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c
index 6d10083fee..e57746e6ac 100644
--- a/keyboards/planck/keymaps/xyverz/keymap.c
+++ b/keyboards/planck/keymaps/xyverz/keymap.c
@@ -19,18 +19,15 @@ extern keymap_config_t keymap_config;
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
-#define _PLOVER 5
 #define _ADJUST 16
 
 enum planck_keycodes {
   QWERTY = SAFE_RANGE,
   COLEMAK,
   DVORAK,
-  PLOVER,
-  LOWER = LT(_LOWER, KC_BSPC),
+  LOWER,
   RAISE = LT(_RAISE, KC_ENT),
-  BACKLIT,
-  EXT_PLV
+  BACKLIT
 };
 
 // Fillers to make layering more clear
@@ -129,30 +126,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {BACKLIT, _______, KC_HOME, KC_END,  _______, KC_DEL,  KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______}
 },
 
-/* Plover layer (http://opensteno.org)
- * ,-----------------------------------------------------------------------------------.
- * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |TogOut|   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-
-[_PLOVER] = {
-  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
-  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
-  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
-  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
-},
-
 /* Adjust (Lower + Raise)
  * ,-----------------------------------------------------------------------------------.
  * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -161,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_ADJUST] = {
   {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
-  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______},
   {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 }
@@ -175,8 +153,6 @@ float tone_startup[][2]    = SONG(STARTUP_SOUND);
 float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
 float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
 float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-float tone_plover[][2]     = SONG(PLOVER_SOUND);
-float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
 float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
 
 float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
@@ -225,7 +201,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         layer_off(_LOWER);
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
-      //return false;
+      return false;
       break;
     case RAISE:
       if (record->event.pressed) {
@@ -248,34 +224,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-    case PLOVER:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          stop_all_notes();
-          PLAY_NOTE_ARRAY(tone_plover, false, 0);
-        #endif
-        layer_off(_RAISE);
-        layer_off(_LOWER);
-        layer_off(_ADJUST);
-        layer_on(_PLOVER);
-        if (!eeconfig_is_enabled()) {
-            eeconfig_init();
-        }
-        keymap_config.raw = eeconfig_read_keymap();
-        keymap_config.nkro = 1;
-        eeconfig_update_keymap(keymap_config.raw);
-      }
-      return false;
-      break;
-    case EXT_PLV:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
-        #endif
-        layer_off(_PLOVER);
-      }
-      return false;
-      break;
   }
   return true;
 }
diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk
index 0f4953888d..93a89bb4ab 100644
--- a/keyboards/planck/keymaps/xyverz/makefile.mk
+++ b/keyboards/planck/keymaps/xyverz/makefile.mk
@@ -9,10 +9,10 @@ MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
+AUDIO_ENABLE = yes          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-- 
cgit v1.2.3


From f89aec98aebc3831e4c51acd5990b2025efc7758 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 20:32:45 +0200
Subject: removed my personal stuff

---
 keyboards/satan/keymaps/iso_split_rshift/.gitignore     | 3 +++
 keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh | 4 ----
 2 files changed, 3 insertions(+), 4 deletions(-)
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/.gitignore
 delete mode 100755 keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/.gitignore b/keyboards/satan/keymaps/iso_split_rshift/.gitignore
new file mode 100644
index 0000000000..4d652661c6
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/.gitignore
@@ -0,0 +1,3 @@
+updatemerge.sh
+clear_flash.hex
+resetboard.sh
diff --git a/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh
deleted file mode 100755
index d17ec76ecd..0000000000
--- a/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/bash
-git checkout iso_split_rshift # gets you "on branch dmgr2"
-git fetch origin              # gets you up to date with origin
-git merge origin/master
-- 
cgit v1.2.3


From ca4968bc44c39eb50752a289224568e27fce8281 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 20:46:38 +0200
Subject: readme.md added

---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/readme.md

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
new file mode 100644
index 0000000000..25ef62b57c
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -0,0 +1,16 @@
+toneman77's Satan Layout
+=====================
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+* heavily modified ISO (!) layout with split right shift key
+* spaceFn
+* Dual-Role keys:
+* Lockable layer for LED functions and numpad
+* WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega)
+
+
+### Additional Credits
+Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan)
+
-- 
cgit v1.2.3


From 77f3efbef6cc19ffd1b0b4cd3813285a18031de1 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 20:59:50 +0200
Subject: more information. first steps in markdown

---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index 25ef62b57c..411dbce32c 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -7,10 +7,24 @@ For the full Quantum feature list, see the parent readme.md.
 * heavily modified ISO (!) layout with split right shift key
 * spaceFn
 * Dual-Role keys:
+ | Original key     | when tapped   | when held     |
+ | ---------------- | ------------- | ------------- |
+ | Space            | Space         | layer change  |
+ | Caps lock        | Escape        | Control       |
+ | Tab              | Tab           | layer change  |
+ | Enter            | Enter         | Control       |
 * Lockable layer for LED functions and numpad
+* vim-style arrow keys on hjkl (spacefn layer)
+* corresponding Home/PgDn/PgUp/End on hjkl (tab layer)
+* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift
+* more bonus arrow keys on wasd (spacefn layer)
+* media keys prev/next/play/vol+/vol- (spacefn layer)
+* formware bootloader button
 * WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega)
+* additional brackets that only work in german layout due to horrible placement
+in the default qwertz layout
 
 
 ### Additional Credits
 Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan)
-
+ce visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
-- 
cgit v1.2.3


From 5cf5e27dcd908ca538208292491e11cd00e38c57 Mon Sep 17 00:00:00 2001
From: Toni <toni.eleftheriadis+github@googlemail.com>
Date: Mon, 15 Aug 2016 21:02:07 +0200
Subject: Update readme.md

attempt to prettify the table
---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index 411dbce32c..862b44eb1c 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -7,12 +7,14 @@ For the full Quantum feature list, see the parent readme.md.
 * heavily modified ISO (!) layout with split right shift key
 * spaceFn
 * Dual-Role keys:
+* 
  | Original key     | when tapped   | when held     |
  | ---------------- | ------------- | ------------- |
  | Space            | Space         | layer change  |
  | Caps lock        | Escape        | Control       |
  | Tab              | Tab           | layer change  |
  | Enter            | Enter         | Control       |
+
 * Lockable layer for LED functions and numpad
 * vim-style arrow keys on hjkl (spacefn layer)
 * corresponding Home/PgDn/PgUp/End on hjkl (tab layer)
-- 
cgit v1.2.3


From 14de76ea8079321ab97f0f187d6f598886171540 Mon Sep 17 00:00:00 2001
From: Toni <toni.eleftheriadis+github@googlemail.com>
Date: Mon, 15 Aug 2016 21:02:40 +0200
Subject: Update readme.md

typo
---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index 862b44eb1c..65dd26bbef 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -29,4 +29,4 @@ in the default qwertz layout
 
 ### Additional Credits
 Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan)
-ce visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
+nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
-- 
cgit v1.2.3


From 94ff9c9fa54749ebcf6eb06f9c1b27076c7e23b4 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 21:04:11 +0200
Subject: more prettyness

---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index 65dd26bbef..53db781881 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -28,5 +28,5 @@ in the default qwertz layout
 
 
 ### Additional Credits
-Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan)
-nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
+* Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan)
+* nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
-- 
cgit v1.2.3


From 396b59f256d8cbf77d359a2b9677f9f7b1d0a021 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 21:12:49 +0200
Subject: readme now with picture

---
 .../satan/keymaps/iso_split_rshift/LEDpinSatan.jpg     | Bin 0 -> 793980 bytes
 keyboards/satan/keymaps/iso_split_rshift/readme.md     |   2 ++
 2 files changed, 2 insertions(+)
 create mode 100644 keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg
new file mode 100644
index 0000000000..7616693f9d
Binary files /dev/null and b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg differ
diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index 53db781881..c08cddba23 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -30,3 +30,5 @@ in the default qwertz layout
 ### Additional Credits
 * Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan)
 * nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
+* no-need-to-solder-on-chip picture:
+![no need to solder directly on the chip anymore](LEDpinSatan.jpg)
-- 
cgit v1.2.3


From b8cbf7c9c0766b1f51373368bc3644b2c48c598f Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 21:18:25 +0200
Subject: script now waits for the user to press the button

---
 keyboards/satan/keymaps/iso_split_rshift/build.sh | 28 +++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh
index 9523f6716f..6b4b4568f5 100755
--- a/keyboards/satan/keymaps/iso_split_rshift/build.sh
+++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh
@@ -1,16 +1,40 @@
 #!/bin/bash
 # adjust for cpu 
 # -j 16 gave best result on a hyperthreaded quad core core i7
+
+LIMIT=10
 THREADS="-j 16"
 KMAP=iso_split_rshift
+
 echo "We need sudo later"
 sudo ls 2>&1 /dev/null
+
+function wait_bootloader {
+	echo "Waiting for Bootloader..."
+	local STARTTIME=$(date +"%s")
+	local REMIND=0
+    local EXEC=dfu-programmer
+    local TARGET=atmega32u4
+	while true
+	do
+		sudo $EXEC $TARGET get > /dev/null 2>&1
+		[ $? -eq 0 ] && break
+		ENDTIME=$(date +"%s")
+		DURATION=$(($ENDTIME-$STARTTIME))
+		if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
+		then 
+			echo "Did you forget to press the reset button?"
+			REMIND=1
+		fi
+        sleep 1
+	done
+}
 make clean
 make KEYMAP=${KMAP} ${THREADS}
 if [[ $? -eq 0 ]]
 then
-    echo "please trigger flashing! you have 5 seconds"
-    sleep 5
+    echo "please trigger flashing!"
+    wait_bootloader
     sudo make KEYMAP=${KMAP} dfu ${THREADS}
 else
     echo "make failed"
-- 
cgit v1.2.3


From 7e1be3ae7c5b1839ce03fcedcc180e19836d3200 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 21:44:20 +0200
Subject: reference to reddit post and Terry Mathews

---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index c08cddba23..1eec0e13eb 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -32,3 +32,5 @@ in the default qwertz layout
 * nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
 * no-need-to-solder-on-chip picture:
 ![no need to solder directly on the chip anymore](LEDpinSatan.jpg)
+* special thanks to /u/TerryMathews  who suggested the pin PB2 so soldering
+directly on the atmega is not needed anymore [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra)
-- 
cgit v1.2.3


From 68005ce60232c487a6b2ff78925c070881c240b5 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Mon, 15 Aug 2016 21:47:07 +0200
Subject: grammar

---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index 1eec0e13eb..116ae9160a 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -33,4 +33,4 @@ in the default qwertz layout
 * no-need-to-solder-on-chip picture:
 ![no need to solder directly on the chip anymore](LEDpinSatan.jpg)
 * special thanks to /u/TerryMathews  who suggested the pin PB2 so soldering
-directly on the atmega is not needed anymore [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra)
+directly on the atmega is not needed anymore. Happened on [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra)
-- 
cgit v1.2.3


From faa3fd48aefb6b9386852b23eb433bafb413755b Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Mon, 15 Aug 2016 22:57:26 +0200
Subject: Minor changes to felix keymap

---
 keyboards/s60-x/keymaps/felix/Makefile |  8 +++---
 keyboards/s60-x/keymaps/felix/config.h | 14 ++++++++++
 keyboards/s60-x/keymaps/felix/keymap.c | 49 +++++++++++++++++++++++++---------
 3 files changed, 54 insertions(+), 17 deletions(-)
 create mode 100644 keyboards/s60-x/keymaps/felix/config.h

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/felix/Makefile b/keyboards/s60-x/keymaps/felix/Makefile
index 251e4631d3..6a078bcc3f 100644
--- a/keyboards/s60-x/keymaps/felix/Makefile
+++ b/keyboards/s60-x/keymaps/felix/Makefile
@@ -2,12 +2,12 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = yes       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes         # Console for debug(+400)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = no           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/s60-x/keymaps/felix/config.h b/keyboards/s60-x/keymaps/felix/config.h
new file mode 100644
index 0000000000..6c01d579f8
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/config.h
@@ -0,0 +1,14 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// keymap needs oneshot functionality
+#undef NO_ACTION_ONESHOT
+
+#undef IS_COMMAND
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
index 9c620527b0..6e40d4839f 100644
--- a/keyboards/s60-x/keymaps/felix/keymap.c
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -20,6 +20,26 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
 
+#define ONESHOT_TAP_TOGGLE 2
+#define ONESHOT_TIMEOUT 1
+
+//Special keycodes for better readability
+//SpaceFN
+//OneShot LeftShift
+//GamingMode Lock (disables SpaceFn and OneShot LShift)
+//Function
+#define KC_SPACEFN KC_FN0
+#define KC_OSLS KC_FN3
+#define KC_GMLK KC_FN1
+#define KC_FUNC KC_FN2
+
+enum function_codes {
+    F_SPACEFN = 0,
+    F_OSLS = 3,
+    F_GMLK = 1,
+    F_FUNC = 2
+};
+
 enum layer_names {
 	DEFAULT,
 	GAMING,
@@ -52,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
 	* |-----------------------------------------------------------|
-	* |Shift   |  Y|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
+	* |Shift OS|  Y|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
 	* |-----------------------------------------------------------|
 	* |Fn2 |Gui |Alt |         SpaceFn       |Alt |Left|Down|Right|
 	* `-----------------------------------------------------------'
@@ -61,8 +81,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  \
 		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Z,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
 		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           \
-		KC_LSFT, KC_NUBS, KC_Y,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
-		KC_FN2,  KC_LGUI, KC_LALT,                            KC_FN0,                                      KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+		KC_OSLS, KC_NUBS, KC_Y,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
+		KC_FUNC, KC_LGUI, KC_LALT,                            KC_SPACEFN,                                  KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
 
 	/* Layout 1: Gaming Layer, SpaceFn disabled
 	* ,-----------------------------------------------------------.
@@ -72,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |      |   |   |   |   |   |   |   |   |   |   |   |        |
 	* |-----------------------------------------------------------|
-	* |        |   |   |   |   |   |   |   |   |   |   |     |Fn1 |
+	* |SFTnonOS|   |   |   |   |   |   |   |   |   |   |     |Fn1 |
 	* |-----------------------------------------------------------|
 	* |   | NOP|     |          Space         |    |    |    |    |
 	* `-----------------------------------------------------------'
@@ -81,8 +102,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
 		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
 		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_FN1,  \
-		_______, XXXXXXX,   _______,                            KC_SPC,                                    _______, _______, _______, _______),
+		KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GMLK,  \
+		_______, XXXXXXX,   _______,                            KC_SPC,                                    _______, _______, _______, _______
+    ),
 
 	/* Layout 2: Function Layer
 	* ,-----------------------------------------------------------.
@@ -92,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |      | � | � |   |Vl-|Mut|Vl+|   |   |   |   |   |PEnt    |
 	* |-----------------------------------------------------------|
-	* |        |   |   |   |   |Cal|   |   |   |   |Pau |PUp |Fn1 |
+	* | CpsLck |   |   |   |   |Cal|   |   |   |   |Pau |PUp |Fn1 |
 	* |-----------------------------------------------------------|
 	* |    |    |    |                        |    |Home|PDn |End |
 	* `-----------------------------------------------------------'
@@ -101,17 +123,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,   RESET,   \
 		_______, _______, KC_C_WM, KC_C_EM, KC_MPRV, KC_MPLY, KC_MNXT, KC_C_UM, KC_C_IM, KC_C_OM, _______, KC_PSCR, KC_SLCK, KC_PAUS, \
 		_______, KC_C_AM, KC_C_SM, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_PENT,          \
-		_______, KC_C_YM, _______, _______, _______, _______, KC_CALC, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_FN1, \
-		_______, _______, _______,                            _______,                                     _______, KC_HOME, KC_PGDN, KC_END),
+		KC_CAPS, KC_C_YM, _______, _______, _______, _______, KC_CALC, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_GMLK, \
+		_______, _______, _______,                            _______,                                     _______, KC_HOME, KC_PGDN, KC_END
+    ),
 };
 
 /*
 * Fn action definition
 */
 const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    /* SpaceFn layout 1 */
-	[1] = ACTION_LAYER_TOGGLE(1),                /* Disable SpaceFn  */
-	[2] = ACTION_LAYER_MOMENTARY(2)             /* SpaceFn layout 1 */
+	[F_SPACEFN] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    // SpaceFn layout 1
+	[F_GMLK] = ACTION_LAYER_TOGGLE(1),                  // Disable SpaceFn and Oneshot Shift
+	[F_FUNC] = ACTION_LAYER_MOMENTARY(2),               // SpaceFn layout 1
+    [F_OSLS] = ACTION_MODS_ONESHOT(MOD_LSFT)            // Oneshot Leftshift
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
@@ -119,7 +143,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
     return MACRO_NONE;
 };
 
-
 void matrix_init_user(void) {
 
 }
-- 
cgit v1.2.3


From f5ed3e5155474e1fefee41374dc8b09ed114a67e Mon Sep 17 00:00:00 2001
From: Matt <7395051@gmail.com>
Date: Mon, 15 Aug 2016 17:26:01 -0500
Subject: Added my custom Planck layout called Circuit.

* Layout has image and readme, as well as documentation in the code.
---
 keyboards/planck/keymaps/circuit/Makefile          |  25 ++
 keyboards/planck/keymaps/circuit/Readme.md         |  44 ++++
 keyboards/planck/keymaps/circuit/config.h          |  91 ++++++++
 .../planck/keymaps/circuit/keyboard-layout.png     | Bin 0 -> 154368 bytes
 keyboards/planck/keymaps/circuit/keymap.c          | 258 +++++++++++++++++++++
 5 files changed, 418 insertions(+)
 create mode 100644 keyboards/planck/keymaps/circuit/Makefile
 create mode 100644 keyboards/planck/keymaps/circuit/Readme.md
 create mode 100644 keyboards/planck/keymaps/circuit/config.h
 create mode 100644 keyboards/planck/keymaps/circuit/keyboard-layout.png
 create mode 100644 keyboards/planck/keymaps/circuit/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/circuit/Makefile b/keyboards/planck/keymaps/circuit/Makefile
new file mode 100644
index 0000000000..1ed0ff9568
--- /dev/null
+++ b/keyboards/planck/keymaps/circuit/Makefile
@@ -0,0 +1,25 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the makefile.mk in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+TAP_DANCE_ENABLE = yes      # Enables the double-tap functionality of keys
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/planck/keymaps/circuit/Readme.md b/keyboards/planck/keymaps/circuit/Readme.md
new file mode 100644
index 0000000000..cbdf5de4e5
--- /dev/null
+++ b/keyboards/planck/keymaps/circuit/Readme.md
@@ -0,0 +1,44 @@
+##Design goals:
+1. Arrow keys always available.
+2. As close to a to my US layout 107-key QWERTY keyboard as I could manage, (i.e. as few arbitrary decisions as possible).
+3. Togglable DVORAK keyboard.
+4. most frequently used things in the easiest to reach places.
+5. Ability to game on it, just for fun.
+
+My layout differs from most in the placement the ARROW keys, `ESC`, VOL keys, use of double-tap `CAPS`, and the GAME LOCK function.
+
+I put the layer buttons in the usual spots. I originally wanted only function/symbols layer, but that proved detrimental. I use some timed press actions to save some space, but this has been accounted for, (see GAME LOCK below). I'm not fully satisfied with the current product (see NOTES below), so it may change in the future.
+
+##Effective layers:
+* Default later is obviously your letters and modifiers.
+* Lower layer [NUMBER] is your numbers and punctuation.
+* Upper layer [ACTION] is your symbols and actions.
+* Function layer is the infrequently used function keys, layout toggle, game lock, and reset.
+
+There is also a toggle for the DVORAK/QWERTY layers, but in normal typing this is not of concern.
+
+###Special keys:
+* `RSHFT` and `ENTER` are combined. Tap once for `ENTER` and hold for `RSHFT`. `ENTER` will be registered on release if released within 200 ms, else `RSHFT` is registered starting at 201 ms until release.
+* If for some reason, this interferes with the normal usage of the `ENTER` key in any way, (some problem that may never happen), I have added a regular non-modified `ENTER` key on the same key in the [ACTION] layer.
+* `LSHFT` and `CAPS` are also combined. The key works like a normal `LSHFT` unless double-tapped, in which case it counts as `CAPS`. This functionality unfortunately delays all key presses by at most 200 ms, but I have added ways to disable this both temporarily or permanently, described below.
+* A failsafe `CAPS` key is on the same key in the [ACTION] layer.
+* There are `UNDO`, `CUT`, `COPY`, and `PASTE` keys. This was intended to be a universal way to use these commands since in macOS cut is `⌘ + C` but in Windows it is `⌃ + C`. Unfortunately these special keys only work in Windows. ¯\\\_(ツ)\_/¯
+
+##Game lock:
+**TL;DR** the game lock toggle disables the double-tap `CAPS`, and disables `GUI` keys (WINDOWS key).
+
+I wished for this keyboard to be fully usable in the most demanding of games. The most demanding game I know of is ARMA 3 which has a binding to practically every individual key of a 107-key keyboard. This means I need to have pretty much every key possible somewhere. I also wanted the keyboard to be responsive in games for every critical keypress. This means having a way to disable features that introduce an inherent delay to registering keys, such as double-tap.
+
+I do not expect to see this used by the pros, but I enjoyed making it. As for use in ARMA 3, I got a little ways into the APEX campaign, but I found a few flaws. For Example, I cannot enable my HUD GPS since that requires `RCTRL`+`M` but `RCTRL` is not bound. The obvious fix is to rebind the action to a new key, but I still take this as a shortcoming of my layout.
+
+###If you wish to disable double-tap
+####Disable it temporarily
+Turn on the game lock. While on, it registers as normal `LSHFT` and has no delay. Whether in game mode or not, `CAPS` is on the same key in the [ACTION] layer.
+
+####Disable it permanently
+Open the `Makefile` and set `TAP_DANCE_ENABLE = no`. I wrote the layout to compensate for this change, and no further changes to the code should be necessary. Whether or not it's disabled, `CAPS` is on the same key in the [ACTION] layer.
+
+##Notes:
+* `ALT` and `GUI` are reversed compared to the normal US layout. I will also be using my Planck on my mac, and that's the standard in the Apple ecosystem. I may add a special compiler flag in the future to swap the two.
+* The DVORAK `Z` key is to the right of the `S` key instead of under it as part of a compromise I made to keep the ARROW keys available on the default layer. I prioritize the ARROW keys, so the DVORAK layout is the one to suffer.
+* I also support the little tones that the default Planck layout features, identical to them too, (minus those for layouts I don't support). To enable it, open the `Makefile` and set `AUDIO_ENABLE = yes`.
diff --git a/keyboards/planck/keymaps/circuit/config.h b/keyboards/planck/keymaps/circuit/config.h
new file mode 100644
index 0000000000..22244f4a7f
--- /dev/null
+++ b/keyboards/planck/keymaps/circuit/config.h
@@ -0,0 +1,91 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* Tap-dance interval definition */
+#define TAPPING_TERM 200
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define MANUFACTURER    Ortholinear Keyboards
+#define PRODUCT         The Planck Keyboard
+#define DESCRIPTION     A compact ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
+#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#ifdef SUBPROJECT_rev3
+    #include "rev3/config.h"
+#endif
+#ifdef SUBPROJECT_rev4
+    #include "rev4/config.h"
+#endif
+
+#endif
diff --git a/keyboards/planck/keymaps/circuit/keyboard-layout.png b/keyboards/planck/keymaps/circuit/keyboard-layout.png
new file mode 100644
index 0000000000..e9296a6d97
Binary files /dev/null and b/keyboards/planck/keymaps/circuit/keyboard-layout.png differ
diff --git a/keyboards/planck/keymaps/circuit/keymap.c b/keyboards/planck/keymaps/circuit/keymap.c
new file mode 100644
index 0000000000..5096decb9b
--- /dev/null
+++ b/keyboards/planck/keymaps/circuit/keymap.c
@@ -0,0 +1,258 @@
+// Layout picture at http://www.keyboard-layout-editor.com/#/gists/125febfad6960add078e6f14256539b6
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+#include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _DVORAK 1
+#define _LOCKED 2
+#define _NUMBER 3
+#define _ACTION 4
+#define _FUNCTN 5
+
+enum planck_keycodes {
+	QWERTY = SAFE_RANGE,
+	DVORAK,
+	NUMBER,
+	ACTION
+};
+
+// Key code names
+#define SFT_ENT FUNC(0)	// Tap for enter, hold for right shift
+#define LOCK    FUNC(1)
+#define KC_PSTE KC_PASTE
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#ifdef TAP_DANCE_ENABLE
+#define SFT_CAP TD(0)	// Left shift, double tap for caps
+#endif
+#ifndef TAP_DANCE_ENABLE
+#define SFT_CAP KC_LSFT // Regular left shift
+#endif
+
+// Tap Dance Definitions
+#ifdef TAP_DANCE_ENABLE
+const qk_tap_dance_action_t tap_dance_actions[] = {
+	[0]  = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
+};
+#endif
+
+// Function definitions
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+	[1] = ACTION_LAYER_TOGGLE(_LOCKED)
+};
+
+// Layout definitions
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | BKSP |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |   '  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |*Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |  Up  |SftEnt|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Ctrl | Alt  | Cmd  | Vol- | ACTN |    Space    | NUMS | Vol+ | Left | Down | Left |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+	{KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+	{KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+	{SFT_CAP, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_UP,   SFT_ENT},
+	{KC_LCTL, KC_LALT, KC_LGUI, KC_VOLD, ACTION,  KC_SPC,  KC_SPC,  NUMBER,  KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT}
+},
+
+/* DVORAK
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   '  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+	{_______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    _______},
+	{_______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_Z   },
+	{_______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    _______, _______},
+	{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+	
+/* LOCK
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      | NULL |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOCKED] = {
+	{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+	{KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+	{_______, _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+
+/* NUMBERS
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ~  | NULL | NULL | NULL |   |  |   _  |   +  |   {  |   }  |   ?  |   /  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   `  | NULL | NULL | NULL |   \  |   -  |   =  |   [  |   ]  |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |     NULL    |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_NUMBER] = {
+	{_______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______},
+	{_______, KC_TILD, XXXXXXX, XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_QUES, KC_SLSH},
+	{_______, KC_GRV,  XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______, _______},
+	{_______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______}
+},
+
+/* ACTIONS
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |  Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CAPS | Undo |  Cut | Copy | Paste| NULL | NULL | NULL | NULL | NULL | PgUp | Enter|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      | Mute |      |     NULL    |      | NULL | Home | PgDn |  End |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ACTION] = {
+	{_______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL },
+	{_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+	{KC_CAPS, KC_UNDO, KC_CUT,  KC_COPY, KC_PSTE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, KC_ENT },
+	{_______, _______, _______, KC_MUTE, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_HOME, KC_PGDN, KC_END }
+},
+
+/* FUNCTIONS
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |  F13 |  F14 |  F15 |  F16 |  F17 |  F18 |  F19 |  F20 |  F21 |  F22 |  F23 |  F24 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | NULL | NULL | NULL | NULL | NULL |QWERTY|DVORAK| NULL | NULL | NULL | NULL | NULL |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Reset| NULL | Lock | NULL |      |     NULL    |      | NULL | NULL | NULL | NULL |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTN] = {
+	{KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12 },
+	{KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24 },
+	{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QWERTY,  DVORAK,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
+	{RESET,   XXXXXXX, LOCK,    XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}
+}
+	
+};
+
+#ifdef AUDIO_ENABLE
+float tone_startup[][2] = SONG(STARTUP_SOUND);
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		case QWERTY:
+			if (record->event.pressed) {
+				if (IS_LAYER_ON(_DVORAK)) {
+#ifdef AUDIO_ENABLE
+					PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+#endif
+					layer_off(_DVORAK);
+				}
+			}
+			return false;
+			break;
+		case DVORAK:
+			if (record->event.pressed) {
+				if (!IS_LAYER_ON(_DVORAK)) {
+#ifdef AUDIO_ENABLE
+					PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+#endif
+					layer_on(_DVORAK);
+				}
+			}
+			return false;
+			break;
+		case NUMBER:
+			if (record->event.pressed) {
+				layer_on(_NUMBER);
+				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
+			} else {
+				layer_off(_NUMBER);
+				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
+			}
+			return false;
+			break;
+		case ACTION:
+			if (record->event.pressed) {
+				layer_on(_ACTION);
+				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
+			} else {
+				layer_off(_ACTION);
+				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
+			}
+			return false;
+			break;
+	}
+	return true;
+}
+
+void matrix_init_user(void) {
+#ifdef AUDIO_ENABLE
+	startup_user();
+#endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+	_delay_ms(20); // gets rid of tick
+	PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+	PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+	_delay_ms(150);
+	stop_all_notes();
+}
+
+void music_on_user(void)
+{
+	music_scale_user();
+}
+
+void music_scale_user(void)
+{
+	PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
-- 
cgit v1.2.3


From 5abb05ca402a3ffbce1d4a0a7e3e4eba1ebc9d1b Mon Sep 17 00:00:00 2001
From: premek <premysl.vyhnal@gmail.com>
Date: Tue, 16 Aug 2016 00:44:58 +0200
Subject: premek split layout

---
 keyboards/planck/keymaps/premek/Makefile  |  25 ++++
 keyboards/planck/keymaps/premek/keymap.c  | 231 ++++++++++++++++++++++++++++++
 keyboards/planck/keymaps/premek/readme.md |   2 +
 3 files changed, 258 insertions(+)
 create mode 100644 keyboards/planck/keymaps/premek/Makefile
 create mode 100644 keyboards/planck/keymaps/premek/keymap.c
 create mode 100644 keyboards/planck/keymaps/premek/readme.md

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/premek/Makefile b/keyboards/planck/keymaps/premek/Makefile
new file mode 100644
index 0000000000..0f4953888d
--- /dev/null
+++ b/keyboards/planck/keymaps/premek/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/planck/keymaps/premek/keymap.c b/keyboards/planck/keymaps/premek/keymap.c
new file mode 100644
index 0000000000..9b212ab259
--- /dev/null
+++ b/keyboards/planck/keymaps/premek/keymap.c
@@ -0,0 +1,231 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _ADJUST 16
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = {
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_DEL,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   },
+  {KC_LSFT, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_TAB,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN},
+  {KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_BSPC, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH},
+  {KC_LGUI, _______, _______, KC_LALT, LOWER,   KC_SPC,  KC_ENT,  KC_SPC,  RAISE,   KC_RALT, _______, KC_RGUI}
+},
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+[_LOWER] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0},
+  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_HOME, KC_PGDN, KC_PGUP, KC_END },
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, KC_F12,  KC_PLUS, KC_PIPE, KC_LCBR, KC_RCBR},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+[_RAISE] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
+  {_______, _______, _______, KC_QUOT, KC_MINS, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT},
+  {_______, KC_TILD, KC_GRV,  KC_PLUS, KC_EQL,  KC_PIPE, _______, KC_BSLS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+},
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_NOTE_ARRAY(tone_plover, false, 0);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
diff --git a/keyboards/planck/keymaps/premek/readme.md b/keyboards/planck/keymaps/premek/readme.md
new file mode 100644
index 0000000000..de9680b498
--- /dev/null
+++ b/keyboards/planck/keymaps/premek/readme.md
@@ -0,0 +1,2 @@
+# The Default Planck Layout
+
-- 
cgit v1.2.3


From a75d4bd593491ea628a271aaddfc4268a241a68f Mon Sep 17 00:00:00 2001
From: premek <premysl.vyhnal@gmail.com>
Date: Tue, 16 Aug 2016 00:50:35 +0200
Subject: premek split layout

---
 keyboards/planck/keymaps/premek/readme.md | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/premek/readme.md b/keyboards/planck/keymaps/premek/readme.md
index de9680b498..df6053d6f8 100644
--- a/keyboards/planck/keymaps/premek/readme.md
+++ b/keyboards/planck/keymaps/premek/readme.md
@@ -1,2 +1,3 @@
-# The Default Planck Layout
+# Split Layout
+Inspired by TECK
 
-- 
cgit v1.2.3


From 2ebfdcac404e4898110da40c4d2f86394595246d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?P=C5=99emek=20Vyhnal?= <premek@users.noreply.github.com>
Date: Tue, 16 Aug 2016 01:07:34 +0200
Subject: Update readme.md

---
 keyboards/planck/keymaps/premek/readme.md | 1 +
 1 file changed, 1 insertion(+)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/premek/readme.md b/keyboards/planck/keymaps/premek/readme.md
index df6053d6f8..16debdd632 100644
--- a/keyboards/planck/keymaps/premek/readme.md
+++ b/keyboards/planck/keymaps/premek/readme.md
@@ -1,3 +1,4 @@
 # Split Layout
 Inspired by TECK
 
+[Layout](http://www.keyboard-layout-editor.com/##@_switchMount=cherry&switchBrand=gateron&switchType=KS-3-Tea&pcb:true%3B&@_c=%23e6e6e6&t=%23757575&a:7&fa@:5%3B%3B&=Esc&_a:4&fa@:5&:0&:0&:0&:0&:0&:0&:0&:0&:5%3B%3B&=%0A%0A!%0A1%0A%0A%0A%0A%0A%0AQ&=%0A%0A%2F@%0A2%0A%0A%0A%0A%0A%0AW&=%0A%0A%23%0A3%0A%0A%0A%0A%0A%0AE&=%0A%0A$%0A4%0A%0A%0A%0A%0A%0AR&=%0A%0A%25%0A5%0A%0A%0A%0A%0A%0AT&_c=%23e3b02d&a:7%3B&=Del&_c=%23e6e6e6&a:4%3B&=%0A%0A%5E%0A6%0A%0A%0A%0A%0A%0AY&=%0A%0A%2F&%0A7%0A%0A%0A%0A%0A%0AU&=%0A%0A*%0A8%0A%0A%0A%0A%0A%0AI&=%0A%0A(%0A9%0A%0A%0A%0A%0A%0AO&=%0A%0A)%0A0%0A%0A%0A%0A%0A%0AP%3B&@_a:7%3B&=Shift&_a:4%3B&=%0A%0A%0AF1%0A%0A%0A%0A%0A%0AA&=%0A%0A%0AF2%0A%0A%0A%0A%0A%0AS&=%0A%0A'%0AF3%0A%0A%0A%0A%0A%0AD&_c=%23e3b02d&n:true%3B&=%0A%0A-%0AF4%0A%0A%0A%0A%0A%0AF&_c=%23e6e6e6%3B&=%0A%0A%0AF5%0A%0A%0A%0A%0A%0AG&_c=%23e3b02d&a:7%3B&=Tab&_c=%23e6e6e6&a:4%3B&=%0A%0A%0AF6%0A%0A%0A%0A%0A%0AH&_c=%23e3b02d&n:true%3B&=%0A%0A%2F&larr%2F%3B%0AHom%0A%0A%0A%0A%0A%0AJ&_c=%23e6e6e6%3B&=%0A%0A%2F&darr%2F%3B%0APgD%0A%0A%0A%0A%0A%0AK&=%0A%0A%2F&uarr%2F%3B%0APgU%0A%0A%0A%0A%0A%0AL&=%0A%0A%2F&rarr%2F%3B%0AEnd%0A%0A%0A%0A%0A%0A%2F%3B%3B&@_a:7%3B&=Ctrl&_a:4%3B&=%0A%0A~%0AF7%0A%0A%0A%0A%0A%0AZ&=%0A%0A%60%0AF8%0A%0A%0A%0A%0A%0AX&=%0A%0A+%0AF9%0A%0A%0A%0A%0A%0AC&=%0A%0A%2F=%0AF10%0A%0A%0A%0A%0A%0AV&=%0A%0A%7C%0AF11%0A%0A%0A%0A%0A%0AB&_c=%23e3b02d&a:7%3B&=BSp&_c=%23e6e6e6&a:4%3B&=%0A%0A%5C%0AF12%0A%0A%0A%0A%0A%0AN&=%0A%0A%5B%0A%0A%0A%0A%0A%0A%0AM&=%0A%0A%5D%0A%0A%0A%0A%0A%0A%0A,&=%0A%0A%7B%0A%0A%0A%0A%0A%0A%0A.&=%0A%0A%7D%0A%0A%0A%0A%0A%0A%0A%2F%2F%3B&@_a:7%3B&=&=&=&=Alt&_c=%23e3b02d%3B&=%2F&dArr%2F%3B&_c=%23e6e6e6%3B&=spc&_c=%23e3b02d%3B&=%2F&crarr%2F%3B&_c=%23e6e6e6%3B&=spc&_c=%23e3b02d%3B&=%2F&uArr%2F%3B&_c=%23e6e6e6%3B&=Alt&=&=)
-- 
cgit v1.2.3


From b1ac91a040a464b595b819417fb1a04c5f9d8926 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Tue, 16 Aug 2016 16:32:42 +0200
Subject: big cleanup and minor refactoring. thanks iFreilicht.

---
 keyboards/satan/keymaps/iso_split_rshift/Makefile | 27 +++----
 keyboards/satan/keymaps/iso_split_rshift/config.h |  7 +-
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 53 +++++++++----
 keyboards/satan/keymaps/iso_split_rshift/satan.c  | 30 -------
 keyboards/satan/keymaps/iso_split_rshift/satan.h  | 96 -----------------------
 keyboards/satan/satan.h                           | 27 +++++++
 6 files changed, 77 insertions(+), 163 deletions(-)
 delete mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.c
 delete mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.h

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile
index e25515b692..9187df44c8 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/Makefile
+++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile
@@ -1,18 +1,15 @@
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= yes # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE   = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE  = no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE       = no  # MIDI controls
+AUDIO_ENABLE      = no
+UNICODE_ENABLE   ?= no  # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h
index 39eec4b597..5e79e07f51 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/config.h
+++ b/keyboards/satan/keymaps/iso_split_rshift/config.h
@@ -20,12 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "../../config.h"
 
-
+// only change
 #define RGB_DI_PIN B2
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 8     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
 
 #endif
diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index 68cc6755e1..f04036d103 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -13,8 +13,29 @@
 #define _TAB 2
 #define _SFX 3
 
+// dual-role shortcuts
+#define TABDUAL LT(_TAB, KC_TAB)
+#define CAPSDUAL CTL_T(KC_ESC)
+#define SPACEDUAL LT(_SPC, KC_SPACE)
+#define ENTERDUAL CTL_T(KC_ENT)
+// arrow cluster duality bottom right corner
+#define ARRLEFT ALT_T(KC_LEFT)
+#define ARRDOWN GUI_T(KC_DOWN)
+#define ARRUP SFT_T(KC_UP)
+#define ARRRIGHT CTL_T(KC_RIGHT)
+// german brackets
+#define GER_CUR_L RALT(KC_7)    // [
+#define GER_CUR_R RALT(KC_9)    // ]
+#define GER_PAR_L LSFT(KC_8)    // (
+#define GER_PAR_R LSFT(KC_9)    // )
+#define GER_ANG_L KC_NUBS       // <
+#define GER_ANG_R LSFT(KC_NUBS) // >
+#define GER_BRC_L RALT(KC_8)    // [
+#define GER_BRC_R RALT(KC_9)    // ]
+
 // increase readability 
 #define _______ KC_TRNS
+#define XXXXXXX KC_NO
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap _DEF: Default Layer
@@ -31,11 +52,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'   LEFT DWN RIGHT
      */
     [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
-        KC_GRV,          KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS,        KC_EQL,          KC_BSPC,         \
-        LT(_TAB,KC_TAB), KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC,        KC_RBRC,         KC_BSLS,         \
-        CTL_T(KC_ESC),   KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT,        KC_NUHS,         CTL_T(KC_ENT),   \
-        KC_LSFT,         KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH,        TG(_SFX),        SFT_T(KC_UP),    \
-        KC_LCTL,         KC_LGUI, KC_LALT,             LT(_SPC,KC_SPACE),               KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN),  CTL_T(KC_RIGHT)),
+        KC_GRV,   KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,   \
+        TABDUAL,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,   \
+        CAPSDUAL, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,  ENTERDUAL, \
+        KC_LSFT,  KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX), ARRUP,     \
+        KC_LCTL,  KC_LGUI, KC_LALT,             SPACEDUAL,                       KC_RALT, ARRLEFT, ARRDOWN,  ARRRIGHT),
 
     /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
      * ,-----------------------------------------------------------.
@@ -51,11 +72,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
-        KC_PSCR, KC_F1,   KC_F2,   KC_F3,      KC_F4,      KC_F5,         KC_F6,   KC_F7,      KC_F8,      KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
-        _______, KC_PAUS, KC_UP,   RALT(KC_8), RALT(KC_9), _______,       _______, LSFT(KC_8), LSFT(KC_9), _______, _______, _______, _______, _______, \
-        _______, KC_LEFT, KC_DOWN, KC_RIGHT,   _______,    _______,       KC_LEFT, KC_DOWN,    KC_UP,      KC_RGHT, _______, _______, _______, KC_MPLY, \
-        _______, _______, _______, _______,    KC_NUBS,    LSFT(KC_NUBS), KC_SPACE,M(0),       _______,    _______, _______, _______, _______, KC_VOLU, \
-        _______, _______, _______,                                        _______,                                  _______, KC_MPRV, KC_VOLD, KC_MNXT),
+        KC_PSCR, KC_F1,   KC_F2,   KC_F3,     KC_F4,     KC_F5,     KC_F6,    KC_F7,     KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+        _______, KC_PAUS, KC_UP,   GER_BRC_L, GER_BRC_R, _______,   _______,  GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \
+        _______, KC_LEFT, KC_DOWN, KC_RIGHT,  _______,   _______,   KC_LEFT,  KC_DOWN,   KC_UP,     KC_RGHT, _______, _______, _______, KC_MPLY, \
+        _______, _______, _______, _______,   GER_ANG_L, GER_ANG_R, KC_SPACE, M(0),      _______,   _______, _______, _______, _______, KC_VOLU, \
+        _______, _______, _______,                                  _______,                                 _______, KC_MPRV, KC_VOLD, KC_MNXT),
 
     /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
      * ,-----------------------------------------------------------.
@@ -71,11 +92,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
-        KC_WAKE, _______, _______, _______, _______, _______, _______, _______,    _______,    _______, _______, _______, _______, KC_INS,  \
-        _______, _______, _______, _______, _______, _______, _______, RALT(KC_7), RALT(KC_0), _______, _______, _______, _______, _______, \
-        _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,    KC_PGUP,    KC_END,  _______, _______, _______, KC_ENT,  \
-        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,    _______, _______, _______, _______, KC_PGUP, \
-        _______, _______, _______,                            _______,                                  _______, KC_HOME, KC_PGDN, KC_END),
+        KC_WAKE, _______, _______, _______, _______, _______, _______, _______,    _______,  _______, _______, _______, _______, KC_INS,  \
+        _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,    KC_PGUP,  KC_END,  _______, _______, _______, KC_ENT,  \
+        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,  _______, _______, _______, _______, KC_PGUP, \
+        _______, _______, _______,                            _______,                                _______, KC_HOME, KC_PGDN, KC_END),
 
     /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
      * ,-----------------------------------------------------------.
@@ -93,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
         RESET,   _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9, _______, _______, _______, KC_BSPC, \
         _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6, _______, _______, _______, KC_BSLS, \
-        _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, KC_NO,   KC_ENT,  \
+        _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, XXXXXXX, KC_ENT,  \
         _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, _______, KC_UP,   \
         _______, _______, _______,                            _______,                         _______, KC_LEFT, KC_DOWN, KC_RGHT),
 };
diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.c b/keyboards/satan/keymaps/iso_split_rshift/satan.c
deleted file mode 100644
index d2c5d5c205..0000000000
--- a/keyboards/satan/keymaps/iso_split_rshift/satan.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include "satan.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRB |= (1<<2);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB &= ~(1<<2);
-    } else {
-        // Turn capslock off
-        PORTB |= (1<<2);
-    }
-}
diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.h b/keyboards/satan/keymaps/iso_split_rshift/satan.h
deleted file mode 100644
index 2ca820c63e..0000000000
--- a/keyboards/satan/keymaps/iso_split_rshift/satan.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef SATAN_H
-#define SATAN_H
-
-#include "../../../../quantum/quantum.h"
-
-/* Clueboard matrix layout
-   * ,-----------------------------------------------------------.
-   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
-   * |-----------------------------------------------------------|
-   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
-   * |-----------------------------------------------------------|
-   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
-   * |-----------------------------------------------------------|
-   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3d      |
-   * |-----------------------------------------------------------|
-   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
-   * `-----------------------------------------------------------'
- */
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
-	k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,           k3d, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
-) \
-{ \
-	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
-	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1d}, \
-	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29,   k2a, k2b, KC_NO, k2d}, \
-	{k30, KC_NO, k32, k33,   k34,   k35, k36,   k37,   k38,   k39,   k3a, k3b, KC_NO, k3d}, \
-	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c,   k4d}  \
-}
-
-/* Satan HHKB matrix layout
-   * ,------------------------------------------------------------.
-   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
-   * |------------------------------------------------------------|
-   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d  |
-   * |------------------------------------------------------------|
-   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d     |
-   * |------------------------------------------------------------|
-   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d   | 3c |
-   * |------------------------------------------------------------|
-   * | 40 | 41 | 42 |        45              | 4a | 4b | 4c | 4d  |
-   * `------------------------------------------------------------'
- */
-
-#define KEYMAP_HHKB( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
-	k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,    k3d,   k3c, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
-) \
-{ \
-	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09, k0a, k0b, k0c,   k0d}, \
-	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19, k1a, k1b, k1c,   k1d}, \
-	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29, k2a, k2b, KC_NO, k2d}, \
-	{k30, KC_NO, k32, k33,   k34,   k35, k36,   k37,   k38,   k39, k3a, k3b, k3c,   k3d}, \
-	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c,   k4d}  \
-}
-
-/* ISO w/ split right shift key matrix layout
-   * ,-----------------------------------------------------------.
-   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
-   * |-----------------------------------------------------------|
-   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
-   * |-----------------------------------------------------------|
-   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
-   * |-----------------------------------------------------------|
-   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c|   3d |
-   * |-----------------------------------------------------------|
-   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
-   * `-----------------------------------------------------------'
- */
-#define KEYMAP_ISO_SPLITRSHIFT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
-) \
-{ \
-	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
-	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1d}, \
-	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29,   k2a, k2b, k2c,   k2d}, \
-	{k30, k31,   k32, k33,   k34,   k35, k36,   k37,   k38,   k39,   k3a, k3b, k3c,   k3d}, \
-	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c,   k4d}  \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
-
-#endif
diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h
index 513446bf37..cbc8c91bd3 100644
--- a/keyboards/satan/satan.h
+++ b/keyboards/satan/satan.h
@@ -62,6 +62,33 @@
 	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c,   k4d}  \
 }
 
+/* ISO w/ split right shift key matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c|   3d |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO_SPLITRSHIFT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
+	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1d}, \
+	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29,   k2a, k2b, k2c,   k2d}, \
+	{k30, k31,   k32, k33,   k34,   k35, k36,   k37,   k38,   k39,   k3a, k3b, k3c,   k3d}, \
+	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c,   k4d}  \
+}
 
 void matrix_init_user(void);
 void matrix_scan_user(void);
-- 
cgit v1.2.3


From 03a24eb86ac2b9af7f47233e3edf2429c02ed8c9 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Tue, 16 Aug 2016 16:35:57 +0200
Subject: minor grammer fixes

---
 keyboards/satan/keymaps/iso_split_rshift/readme.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md
index 116ae9160a..ec6123d8a7 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/readme.md
+++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md
@@ -21,7 +21,7 @@ For the full Quantum feature list, see the parent readme.md.
 * bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift
 * more bonus arrow keys on wasd (spacefn layer)
 * media keys prev/next/play/vol+/vol- (spacefn layer)
-* formware bootloader button
+* firmware bootloader button
 * WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega)
 * additional brackets that only work in german layout due to horrible placement
 in the default qwertz layout
@@ -32,5 +32,5 @@ in the default qwertz layout
 * nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48)
 * no-need-to-solder-on-chip picture:
 ![no need to solder directly on the chip anymore](LEDpinSatan.jpg)
-* special thanks to /u/TerryMathews  who suggested the pin PB2 so soldering
+* special thanks to /u/TerryMathews  who suggested the pin PB2, so soldering
 directly on the atmega is not needed anymore. Happened on [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra)
-- 
cgit v1.2.3


From deedd2f40890807931d45422aab2beef702925c4 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Tue, 16 Aug 2016 16:44:12 +0200
Subject: in accordance to keymap_makefile_example.mk

---
 keyboards/satan/keymaps/iso_split_rshift/Makefile | 24 +++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile
index 9187df44c8..d1e07da3fc 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/Makefile
+++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile
@@ -1,15 +1,15 @@
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= yes # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE   = yes # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE  = no  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE       = no  # MIDI controls
-AUDIO_ENABLE      = no
-UNICODE_ENABLE   ?= no  # Unicode
-BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = yes # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
-- 
cgit v1.2.3


From 8e142d8cbe8a749878d6b8ee5b6316341f1dfbb6 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Tue, 16 Aug 2016 17:35:03 +0200
Subject: no more warning thanks to iFreilicht's tip with undef

---
 keyboards/satan/keymaps/iso_split_rshift/config.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h
index 5e79e07f51..27c1372da1 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/config.h
+++ b/keyboards/satan/keymaps/iso_split_rshift/config.h
@@ -21,6 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "../../config.h"
 
 // only change
+#undef RGB_DI_PIN 
 #define RGB_DI_PIN B2
 
 #endif
-- 
cgit v1.2.3


From 29f64d7a93d941167c6c6e95f893ab84586b2205 Mon Sep 17 00:00:00 2001
From: Gergely Nagy <algernon@madhouse-project.org>
Date: Wed, 17 Aug 2016 13:04:50 +0200
Subject: tap-dance: Major rework, to make it more reliable

This reworks how the tap-dance feature works: instead of one global
state, we have a state for each tap-dance key, so we can cancel them
when another tap-dance key is in flight. This fixes #527.

Since we have a state for each key, we can avoid situation where a keyup
would mess with our global state. This fixes #563.

And while here, we also make sure to fire events only once, and this
fixes #574.

There is one breaking change, though: tap-dance debugging support was
removed, because dumping the whole state would increase the firmware
size too much. Any keymap that made use of this, will have to be
updated (but there's no such keymap in the repo).

Also, there's a nice trick used in this rework: we need to iterate
through tap_dance_actions in a few places, to check for timeouts, and so
on. For this, we'd need to know the size of the array. We can't discover
that at compile-time, because tap-dance gets compiled separately. We'd
like to avoid having to terminate the list with a sentinel value,
because that would require updates to all keymaps that use the feature.
So, we keep track of the highest tap-dance code seen so far, and iterate
until that index.

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
---
 keyboards/ergodox/keymaps/algernon/keymap.c | 2 +-
 keyboards/preonic/keymaps/kinesis/keymap.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c
index 244bfb51fe..144030e2e9 100644
--- a/keyboards/ergodox/keymaps/algernon/keymap.c
+++ b/keyboards/ergodox/keymaps/algernon/keymap.c
@@ -853,7 +853,7 @@ void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) {
   td_ta->finished_once = false;
 }
 
-const qk_tap_dance_action_t tap_dance_actions[] = {
+qk_tap_dance_action_t tap_dance_actions[] = {
    [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset)
   ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset)
   ,[CT_TA]  = {
diff --git a/keyboards/preonic/keymaps/kinesis/keymap.c b/keyboards/preonic/keymaps/kinesis/keymap.c
index 1cd6eb9938..9691be91d9 100644
--- a/keyboards/preonic/keymaps/kinesis/keymap.c
+++ b/keyboards/preonic/keymaps/kinesis/keymap.c
@@ -123,7 +123,7 @@ void music_scale_user(void)
 }
 
 
-const qk_tap_dance_action_t tap_dance_actions[] = {
+qk_tap_dance_action_t tap_dance_actions[] = {
   //Tap once for equal, twice for hyper + X (alfred lock)
   [TD_EQ_LOCK] = ACTION_TAP_DANCE_DOUBLE(KC_EQL,  HYPR(KC_X)),
   //Tap once for minus, twice for time.heals.nothing
-- 
cgit v1.2.3


From c024de4a879cdab04f0473c29c6e9c4f6f28cbae Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Wed, 17 Aug 2016 15:33:14 +0200
Subject: wring keypress for german iso fixed. prettified

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index f04036d103..bc5bfe2e63 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -14,18 +14,18 @@
 #define _SFX 3
 
 // dual-role shortcuts
-#define TABDUAL LT(_TAB, KC_TAB)
-#define CAPSDUAL CTL_T(KC_ESC)
+#define TABDUAL   LT(_TAB, KC_TAB)
+#define CAPSDUAL  CTL_T(KC_ESC)
 #define SPACEDUAL LT(_SPC, KC_SPACE)
 #define ENTERDUAL CTL_T(KC_ENT)
 // arrow cluster duality bottom right corner
-#define ARRLEFT ALT_T(KC_LEFT)
-#define ARRDOWN GUI_T(KC_DOWN)
-#define ARRUP SFT_T(KC_UP)
+#define ARRLEFT  ALT_T(KC_LEFT)
+#define ARRDOWN  GUI_T(KC_DOWN)
+#define ARRUP    SFT_T(KC_UP)
 #define ARRRIGHT CTL_T(KC_RIGHT)
 // german brackets
 #define GER_CUR_L RALT(KC_7)    // [
-#define GER_CUR_R RALT(KC_9)    // ]
+#define GER_CUR_R RALT(KC_0)    // ]
 #define GER_PAR_L LSFT(KC_8)    // (
 #define GER_PAR_R LSFT(KC_9)    // )
 #define GER_ANG_L KC_NUBS       // <
-- 
cgit v1.2.3


From e3486caf870b4e4adf915f490e3905d4e24ce2ac Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Wed, 17 Aug 2016 14:54:05 -0700
Subject: Create readme.md

---
 keyboards/ergodox/keymaps/xyverz/readme.md | 5 +++++
 1 file changed, 5 insertions(+)
 create mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
new file mode 100644
index 0000000000..9cb22bde6a
--- /dev/null
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -0,0 +1,5 @@
+# PLEASE NOTE
+
+## This keymap is optomised for the EZ and Original ergodox. 
+
+It will need modification in order to work on the Infinity.
-- 
cgit v1.2.3


From ef95c10c6659ecc5e23b126d9ac4f3b2d169efb2 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Wed, 17 Aug 2016 14:55:01 -0700
Subject: Update readme.md

---
 keyboards/ergodox/keymaps/xyverz/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index 9cb22bde6a..22e771b091 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -2,4 +2,4 @@
 
 ## This keymap is optomised for the EZ and Original ergodox. 
 
-It will need modification in order to work on the Infinity.
+It will need **substantial** modification in order to work on the Infinity.
-- 
cgit v1.2.3


From 47beb763e824341c82ad2f9e23b57ecbd4e38308 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 18 Aug 2016 00:05:24 -0700
Subject: Returned RAISE and LOWER buttons to their original functions - too
 many inopportune ENTER inputs. :-(

---
 keyboards/planck/keymaps/xyverz/keymap.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c
index e57746e6ac..192933b181 100644
--- a/keyboards/planck/keymaps/xyverz/keymap.c
+++ b/keyboards/planck/keymaps/xyverz/keymap.c
@@ -26,7 +26,7 @@ enum planck_keycodes {
   COLEMAK,
   DVORAK,
   LOWER,
-  RAISE = LT(_RAISE, KC_ENT),
+  RAISE,
   BACKLIT
 };
 
@@ -86,7 +86,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_DVORAK] = {
   {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH},
   {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS},
-  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_T(KC_ENT)},
   {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT }
 },
 
@@ -211,7 +211,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         layer_off(_RAISE);
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
-      //return false;
+      return false;
       break;
     case BACKLIT:
       if (record->event.pressed) {
-- 
cgit v1.2.3


From 035290b7d84e1f2c4d473d585b66e1dde9b3bdee Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 18 Aug 2016 00:22:56 -0700
Subject: Added a readme, tidied up comments in the keymap.

---
 keyboards/ergodox/keymaps/xyverz/keymap.c  |  53 ++++++-------
 keyboards/ergodox/keymaps/xyverz/readme.md | 123 ++++++++++++++++++++++++++++-
 2 files changed, 147 insertions(+), 29 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
index c5ce99dd22..7a16367bfa 100644
--- a/keyboards/ergodox/keymaps/xyverz/keymap.c
+++ b/keyboards/ergodox/keymaps/xyverz/keymap.c
@@ -1,4 +1,10 @@
 /*
+ * PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are
+ * based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to 
+ * figure out where the keys are in the matrix and redo the layout arrays below.
+ * 
+ * About this keymap:
+ * 
  * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak
  * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner
  * keys. I've decided to continue using this layout with my ErgoDox.
@@ -33,8 +39,9 @@ extern keymap_config_t keymap_config;
 #define COLEMAK M(_CM)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap 0: Dvorak layer
- *
+
+[_DV] = {  // layer 0 : Dvorak
+/*  
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * |   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
@@ -55,9 +62,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  *
  */
-// If it accepts an argument (i.e, is a function), it doesn't need KC_.
-// Otherwise, it needs KC_*
-[_DV] = {  // layer 0 : Dvorak
         // left hand
 	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
 	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV,  KC_END },
@@ -77,8 +81,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO  }
 },
 
-/* Keymap 1: QWERTY layer
- *
+
+[_QW] = {  // layer 1 : QWERTY
+/* 
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
@@ -98,9 +103,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      | End  |       | PgDn |      |      |
  *                                 `--------------------'       `--------------------'
  */
-// If it accepts an argument (i.e, is a function), it doesn't need KC_.
-// Otherwise, it needs KC_*
-[_QW] = {  // layer 1 : QWERTY
         // left hand
 	{KC_EQL,  KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
 	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
@@ -120,8 +122,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
   },
 
-/* Keymap 2: Colemak layer
- *
+
+[_CM] = {  // layer 2 : Colemak
+/* 
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
@@ -141,9 +144,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      | End  |       | PgDn |      |      |
  *                                 `--------------------'       `--------------------'
  */
-// If it accepts an argument (i.e, is a function), it doesn't need KC_.
-// Otherwise, it needs KC_*
-[_CM] = {  // layer 2 : Colemak
         // left hand
 	{KC_EQL,  KC_TAB,  KC_BSPC, KC_LSFT, KC_LGUI, KC_NO  },
 	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
@@ -163,15 +163,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
   },
 
-/* Keymap 3: Symbol Layer
- *
+
+[_MD] = { // layer 3 : Media layer
+/* 
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * | TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      | PrSc | ScLk | Paus |      | FN4  |           |  FN5 |      | Mute | Vol- | Vol+ |      |        |
+ * |        |      | PrSc | ScLk | Paus |      |      |           |      |      | Mute | Vol- | Vol+ |      |        |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * |        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
- * |--------+------+------+------+------+------| FN4  |           |  FN5 |------+------+------+------+------+--------|
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * |        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
  *   |      |      |      |      |      |                                       |      |      |      |      |      |
@@ -184,8 +185,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      |      |       |      |      |      |
  *                                 `--------------------'       `--------------------'
  */
-// Media Layer
-[_MD] = { // layer 3 : Media layer
         // left hand
 	{RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  },
 	{KC_F1,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
@@ -205,15 +204,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  }
   },
 
-/* Keymap 4: Keypad layer
- *
+
+[_KP] = { // layer 4 : Keypad layer
+/* 
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * | Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP * | KP - |        |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Sleep  |      |      |      |      |      | FN5  |           |  FN4 |      | KP 7 | KP 8 | KP 9 | KP + |        |
+ * | Sleep  |      |      |      |      |      |      |           |      |      | KP 7 | KP 8 | KP 9 | KP + |        |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * | Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
- * |--------+------+------+------+------+------| FN5  |           |  FN4 |------+------+------+------+------+--------|
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * |        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
  *   |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
@@ -226,8 +226,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      |      |       |      |      |      |
  *                                 `--------------------'       `--------------------'
  */
-// Keypad Layer
-[_KP] = { // layer 4 : Keypad layer
         // left hand
 	{KC_PWR,  KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO  },
 	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
@@ -247,6 +245,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_NO  }
   },
 
+
 };
 
 const uint16_t PROGMEM fn_actions[] = {
diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index 22e771b091..42ae8fe539 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -1,5 +1,124 @@
-# PLEASE NOTE
+# Xyverz's ErgoDox EZ Keymap
 
-## This keymap is optomised for the EZ and Original ergodox. 
+## Please Note:
 
 It will need **substantial** modification in order to work on the Infinity.
+
+PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below.
+
+## About this keymap:
+
+The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my ErgoDox.
+
+The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional keys as shown in the diagrams. The Colemak layout is merely an adaptation of that.
+
+I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts.
+
+For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined, beginning on line 81.
+
+### Layer 0: Dvorak layer
+
+,--------------------------------------------------.           ,--------------------------------------------------.
+|   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+| Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+| CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
+|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+| LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | LCtr | LAlt |       | Ralt | RCtr |
+                                ,------|------|------|       |------+------+------.
+                                |      |      | Home |       | PgUp |      |      |
+                                | BkSp | Del  |------|       |------| Enter| Space|
+                                |      |      | End  |       | PgDn |      |      |
+                                `--------------------'       `--------------------'
+
+### Layer 1: QWERTY layer
+
+,--------------------------------------------------.           ,--------------------------------------------------.
+|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+| Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+| CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
+|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | LCtr | LAlt |       | Ralt | RCtr |
+                                ,------|------|------|       |------+------+------.
+                                |      |      | Home |       | PgUp |      |      |
+                                | BkSp | Del  |------|       |------| Enter| Space|
+                                |      |      | End  |       | PgDn |      |      |
+                                `--------------------'       `--------------------'
+ 
+### Keymap 2: Colemak layer
+
+,--------------------------------------------------.           ,--------------------------------------------------.
+|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+| Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+| BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
+|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | LCtr | LAlt |       | Ralt | RCtr |
+                                ,------|------|------|       |------+------+------.
+                                |      |      | Home |       | PgUp |      |      |
+                                | BkSp | Del  |------|       |------| Enter| Space|
+                                |      |      | End  |       | PgDn |      |      |
+                                `--------------------'       `--------------------'
+
+### layer 3 : Media layer
+
+,--------------------------------------------------.           ,--------------------------------------------------.
+| TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|        |      | PrSc | ScLk | Paus |      |      |           |      |      | Mute | Vol- | Vol+ |      |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |      |      |      |      |      |                                       |      |      |      |      |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       |      |      |       |      |      |
+                                ,------|------|------|       |------+------+------.
+                                |      |      |      |       |      |      |      |
+                                |      |      |------|       |------|      |      |
+                                |      |      |      |       |      |      |      |
+                                `--------------------'       `--------------------'
+
+
+
+### Keymap 4: Keypad layer
+
+,--------------------------------------------------.           ,--------------------------------------------------.
+| Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP| KP - |        |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+| Sleep  |      |      |      |      |      |      |           |      |      | KP 7 | KP 8 | KP 9 | KP + |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+| Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       |      |      |       |      |      |
+                                ,------|------|------|       |------+------+------.
+                                |      |      |      |       |      |      |      |
+                                |      |      |------|       |------|      |      |
+                                |      |      |      |       |      |      |      |
+                                `--------------------'       `--------------------'
-- 
cgit v1.2.3


From 4dd641a128aa93f9decec3387b7c34a01007eb4a Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 18 Aug 2016 00:27:54 -0700
Subject: Hopefully this fixes the layout diagrams.

---
 keyboards/ergodox/keymaps/xyverz/readme.md | 182 ++++++++++++++---------------
 1 file changed, 91 insertions(+), 91 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index 42ae8fe539..8bcf5b3035 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -18,107 +18,107 @@ For a better explanation of the layout matrices shown below, take a look at ../.
 
 ### Layer 0: Dvorak layer
 
-,--------------------------------------------------.           ,--------------------------------------------------.
-|   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
-|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-| Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
-|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-| CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
-|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
-| LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
-`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
-  `----------------------------------'                                       `----------------------------------'
-                                       ,-------------.       ,-------------.
-                                       | LCtr | LAlt |       | Ralt | RCtr |
-                                ,------|------|------|       |------+------+------.
-                                |      |      | Home |       | PgUp |      |      |
-                                | BkSp | Del  |------|       |------| Enter| Space|
-                                |      |      | End  |       | PgDn |      |      |
-                                `--------------------'       `--------------------'
+	,--------------------------------------------------.           ,--------------------------------------------------.
+	|   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
+	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+	| Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
+	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+	| CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
+	|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+	| LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
+	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+	  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
+	  `----------------------------------'                                       `----------------------------------'
+	                                       ,-------------.       ,-------------.
+	                                       | LCtr | LAlt |       | Ralt | RCtr |
+	                                ,------|------|------|       |------+------+------.
+	                                |      |      | Home |       | PgUp |      |      |
+	                                | BkSp | Del  |------|       |------| Enter| Space|
+	                                |      |      | End  |       | PgDn |      |      |
+	                                `--------------------'       `--------------------'
 
 ### Layer 1: QWERTY layer
 
-,--------------------------------------------------.           ,--------------------------------------------------.
-|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
-|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-| Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
-|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-| CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
-|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
-| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
-`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
-  `----------------------------------'                                       `----------------------------------'
-                                       ,-------------.       ,-------------.
-                                       | LCtr | LAlt |       | Ralt | RCtr |
-                                ,------|------|------|       |------+------+------.
-                                |      |      | Home |       | PgUp |      |      |
-                                | BkSp | Del  |------|       |------| Enter| Space|
-                                |      |      | End  |       | PgDn |      |      |
-                                `--------------------'       `--------------------'
- 
+	,--------------------------------------------------.           ,--------------------------------------------------.
+	|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+	| Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
+	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+	| CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
+	|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+	| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+	  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+	  `----------------------------------'                                       `----------------------------------'
+	                                       ,-------------.       ,-------------.
+	                                       | LCtr | LAlt |       | Ralt | RCtr |
+	                                ,------|------|------|       |------+------+------.
+	                                |      |      | Home |       | PgUp |      |      |
+	                                | BkSp | Del  |------|       |------| Enter| Space|
+	                                |      |      | End  |       | PgDn |      |      |
+	                                `--------------------'       `--------------------'
+	 
 ### Keymap 2: Colemak layer
 
-,--------------------------------------------------.           ,--------------------------------------------------.
-|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
-|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-| Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
-|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-| BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
-|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
-| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
-`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
-  `----------------------------------'                                       `----------------------------------'
-                                       ,-------------.       ,-------------.
-                                       | LCtr | LAlt |       | Ralt | RCtr |
-                                ,------|------|------|       |------+------+------.
-                                |      |      | Home |       | PgUp |      |      |
-                                | BkSp | Del  |------|       |------| Enter| Space|
-                                |      |      | End  |       | PgDn |      |      |
-                                `--------------------'       `--------------------'
+	,--------------------------------------------------.           ,--------------------------------------------------.
+	|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+	| Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
+	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+	| BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
+	|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+	| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
+	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+	  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+	  `----------------------------------'                                       `----------------------------------'
+	                                       ,-------------.       ,-------------.
+	                                       | LCtr | LAlt |       | Ralt | RCtr |
+	                                ,------|------|------|       |------+------+------.
+	                                |      |      | Home |       | PgUp |      |      |
+	                                | BkSp | Del  |------|       |------| Enter| Space|
+	                                |      |      | End  |       | PgDn |      |      |
+	                                `--------------------'       `--------------------'
 
 ### layer 3 : Media layer
 
-,--------------------------------------------------.           ,--------------------------------------------------.
-| TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
-|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-|        |      | PrSc | ScLk | Paus |      |      |           |      |      | Mute | Vol- | Vol+ |      |        |
-|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-|        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
-|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-|        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
-`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-  |      |      |      |      |      |                                       |      |      |      |      |      |
-  `----------------------------------'                                       `----------------------------------'
-                                       ,-------------.       ,-------------.
-                                       |      |      |       |      |      |
-                                ,------|------|------|       |------+------+------.
-                                |      |      |      |       |      |      |      |
-                                |      |      |------|       |------|      |      |
-                                |      |      |      |       |      |      |      |
-                                `--------------------'       `--------------------'
+	,--------------------------------------------------.           ,--------------------------------------------------.
+	| TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+	|        |      | PrSc | ScLk | Paus |      |      |           |      |      | Mute | Vol- | Vol+ |      |        |
+	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+	|        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
+	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+	|        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
+	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+	  |      |      |      |      |      |                                       |      |      |      |      |      |
+	  `----------------------------------'                                       `----------------------------------'
+	                                       ,-------------.       ,-------------.
+	                                       |      |      |       |      |      |
+	                                ,------|------|------|       |------+------+------.
+	                                |      |      |      |       |      |      |      |
+	                                |      |      |------|       |------|      |      |
+	                                |      |      |      |       |      |      |      |
+	                                `--------------------'       `--------------------'
 
 
 
 ### Keymap 4: Keypad layer
 
-,--------------------------------------------------.           ,--------------------------------------------------.
-| Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP| KP - |        |
-|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-| Sleep  |      |      |      |      |      |      |           |      |      | KP 7 | KP 8 | KP 9 | KP + |        |
-|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-| Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
-|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-|        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
-`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-  |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
-  `----------------------------------'                                       `----------------------------------'
-                                       ,-------------.       ,-------------.
-                                       |      |      |       |      |      |
-                                ,------|------|------|       |------+------+------.
-                                |      |      |      |       |      |      |      |
-                                |      |      |------|       |------|      |      |
-                                |      |      |      |       |      |      |      |
-                                `--------------------'       `--------------------'
+	,--------------------------------------------------.           ,--------------------------------------------------.
+	| Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP| KP - |        |
+	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+	| Sleep  |      |      |      |      |      |      |           |      |      | KP 7 | KP 8 | KP 9 | KP + |        |
+	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+	| Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
+	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+	|        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
+	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+	  |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
+	  `----------------------------------'                                       `----------------------------------'
+	                                       ,-------------.       ,-------------.
+	                                       |      |      |       |      |      |
+	                                ,------|------|------|       |------+------+------.
+	                                |      |      |      |       |      |      |      |
+	                                |      |      |------|       |------|      |      |
+	                                |      |      |      |       |      |      |      |
+	                                `--------------------'       `--------------------'
-- 
cgit v1.2.3


From 118ad691c46454df8d8aa810190cfa4e21f8952b Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 18 Aug 2016 00:34:22 -0700
Subject: more formatting changes

---
 keyboards/ergodox/keymaps/xyverz/readme.md | 180 ++++++++++++++---------------
 1 file changed, 90 insertions(+), 90 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index 8bcf5b3035..32e569b38c 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -18,107 +18,107 @@ For a better explanation of the layout matrices shown below, take a look at ../.
 
 ### Layer 0: Dvorak layer
 
-	,--------------------------------------------------.           ,--------------------------------------------------.
-	|   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
-	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-	| Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
-	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-	| CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
-	|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
-	| LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
-	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-	  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
-	  `----------------------------------'                                       `----------------------------------'
-	                                       ,-------------.       ,-------------.
-	                                       | LCtr | LAlt |       | Ralt | RCtr |
-	                                ,------|------|------|       |------+------+------.
-	                                |      |      | Home |       | PgUp |      |      |
-	                                | BkSp | Del  |------|       |------| Enter| Space|
-	                                |      |      | End  |       | PgDn |      |      |
-	                                `--------------------'       `--------------------'
+	,--------------------------------------------------.,--------------------------------------------------.
+	|   ]    |   1  |   2  |   3  |   4  |   5  | ESC  || ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
+	|--------+------+------+------+------+-------------||------+------+------+------+------+------+--------|
+	| Tab    |   '  |   ,  |   .  |   Y  |   Y  |      ||      |   F  |   G  |   C  |   R  |   L  |   \    |
+	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
+	| CapsLk |   A  |   O  |   E  |   U  |   I  |------||------|   D  |   H  |   T  |   N  |   S  |   -    |
+	|--------+------+------+------+------+------| _MD  || _KP  |------+------+------+------+------+--------|
+	| LShift |   Z  |   X  |   C  |   V  |   X  |      ||      |   B  |   M  |   W  |   V  |   Z  | RShift |
+	`--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------'
+	  | LGUI |   `  |  INS | Left | Rght |                            |  Up  |  Dn  |   /  |   =  | RGUI |
+	  `----------------------------------'                            `----------------------------------'
+	                                     ,-------------.,-------------.
+	                                     | LCtr | LAlt || Ralt | RCtr |
+	                              ,------|------|------||------+------+------.
+	                              |      |      | Home || PgUp |      |      |
+	                              | BkSp | Del  |------||------| Enter| Space|
+	                              |      |      | End  || PgDn |      |      |
+	                              `--------------------'`--------------------'
 
 ### Layer 1: QWERTY layer
 
-	,--------------------------------------------------.           ,--------------------------------------------------.
-	|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
-	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-	| Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
-	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-	| CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
-	|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
-	| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
-	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-	  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
-	  `----------------------------------'                                       `----------------------------------'
-	                                       ,-------------.       ,-------------.
-	                                       | LCtr | LAlt |       | Ralt | RCtr |
-	                                ,------|------|------|       |------+------+------.
-	                                |      |      | Home |       | PgUp |      |      |
-	                                | BkSp | Del  |------|       |------| Enter| Space|
-	                                |      |      | End  |       | PgDn |      |      |
-	                                `--------------------'       `--------------------'
+	,--------------------------------------------------.,--------------------------------------------------.
+	|   =    |   1  |   2  |   3  |   4  |   5  | ESC  || ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+	|--------+------+------+------+------+-------------||------+------+------+------+------+------+--------|
+	| Tab    |   Q  |   W  |   E  |   R  |   T  |      ||      |   Y  |   U  |   I  |   O  |   P  |   \    |
+	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
+	| CapsLk |   A  |   S  |   D  |   F  |   G  |------||------|   H  |   J  |   K  |   L  |   ;  |   '    |
+	|--------+------+------+------+------+------| _MD  || _KP  |------+------+------+------+------+--------|
+	| LShift |   Z  |   X  |   C  |   V  |   B  |      ||      |   N  |   M  |   ,  |   .  |   /  | RShift |
+	`--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------'
+	  | LGUI |   `  |  INS | Left | Rght |                            |  Up  |  Dn  |   [  |   ]  | RGUI |
+	  `----------------------------------'                            `----------------------------------'
+	                                     ,-------------.,-------------.
+	                                     | LCtr | LAlt || Ralt | RCtr |
+	                              ,------|------|------||------+------+------.
+	                              |      |      | Home || PgUp |      |      |
+	                              | BkSp | Del  |------||------| Enter| Space|
+	                              |      |      | End  || PgDn |      |      |
+	                              `--------------------'`--------------------'
 	 
 ### Keymap 2: Colemak layer
 
-	,--------------------------------------------------.           ,--------------------------------------------------.
-	|   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
-	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-	| Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
-	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-	| BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
-	|--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
-	| LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
-	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-	  | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
-	  `----------------------------------'                                       `----------------------------------'
-	                                       ,-------------.       ,-------------.
-	                                       | LCtr | LAlt |       | Ralt | RCtr |
-	                                ,------|------|------|       |------+------+------.
-	                                |      |      | Home |       | PgUp |      |      |
-	                                | BkSp | Del  |------|       |------| Enter| Space|
-	                                |      |      | End  |       | PgDn |      |      |
-	                                `--------------------'       `--------------------'
+	,--------------------------------------------------.,--------------------------------------------------.
+	|   =    |   1  |   2  |   3  |   4  |   5  | ESC  || ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+	|--------+------+------+------+------+-------------||------+------+------+------+------+------+--------|
+	| Tab    |   Q  |   W  |   F  |   P  |   G  |      ||      |   J  |   L  |   U  |   Y  |   ;  |   \    |
+	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
+	| BkSpc  |   A  |   R  |   S  |   T  |   D  |------||------|   H  |   N  |   E  |   I  |   O  |   '    |
+	|--------+------+------+------+------+------| _MD  || _KP  |------+------+------+------+------+--------|
+	| LShift |   Z  |   X  |   C  |   V  |   B  |      ||      |   K  |   M  |   ,  |   .  |   /  | RShift |
+	`--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------'
+	  | LGUI |   `  |  INS | Left | Rght |                            |  Up  |  Dn  |   [  |   ]  | RGUI |
+	  `----------------------------------'                            `----------------------------------'
+	                                     ,-------------.,-------------.
+	                                     | LCtr | LAlt || Ralt | RCtr |
+	                              ,------|------|------||------+------+------.
+	                              |      |      | Home || PgUp |      |      |
+	                              | BkSp | Del  |------||------| Enter| Space|
+	                              |      |      | End  || PgDn |      |      |
+	                              `--------------------'`--------------------'
 
 ### layer 3 : Media layer
 
-	,--------------------------------------------------.           ,--------------------------------------------------.
-	| TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
-	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-	|        |      | PrSc | ScLk | Paus |      |      |           |      |      | Mute | Vol- | Vol+ |      |        |
-	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-	|        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
-	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-	|        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
-	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-	  |      |      |      |      |      |                                       |      |      |      |      |      |
-	  `----------------------------------'                                       `----------------------------------'
-	                                       ,-------------.       ,-------------.
-	                                       |      |      |       |      |      |
-	                                ,------|------|------|       |------+------+------.
-	                                |      |      |      |       |      |      |      |
-	                                |      |      |------|       |------|      |      |
-	                                |      |      |      |       |      |      |      |
-	                                `--------------------'       `--------------------'
+	,--------------------------------------------------.,--------------------------------------------------.
+	| TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  ||  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+	|--------+------+------+------+------+-------------||------+------+------+------+------+------+--------|
+	|        |      | PrSc | ScLk | Paus |      |      ||      |      | Mute | Vol- | Vol+ |      |        |
+	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
+	|        |      |      |      |      |      |------||------| Stop | Prev | Play | Next | Sel  |        |
+	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
+	|        |      |Dvorak|Qwerty|Colemk|      |      ||      |      |      |      |      |      |        |
+	`--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------'
+	  |      |      |      |      |      |                            |      |      |      |      |      |
+	  `----------------------------------'                            `----------------------------------'
+	                                     ,-------------.,-------------.
+	                                     |      |      ||      |      |
+	                              ,------|------|------||------+------+------.
+	                              |      |      |      ||      |      |      |
+	                              |      |      |------||------|      |      |
+	                              |      |      |      ||      |      |      |
+	                              `--------------------'`--------------------'
 
 
 
 ### Keymap 4: Keypad layer
 
-	,--------------------------------------------------.           ,--------------------------------------------------.
-	| Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP| KP - |        |
-	|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
-	| Sleep  |      |      |      |      |      |      |           |      |      | KP 7 | KP 8 | KP 9 | KP + |        |
-	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-	| Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
-	|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
-	|        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
-	`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-	  |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
-	  `----------------------------------'                                       `----------------------------------'
-	                                       ,-------------.       ,-------------.
-	                                       |      |      |       |      |      |
-	                                ,------|------|------|       |------+------+------.
-	                                |      |      |      |       |      |      |      |
-	                                |      |      |------|       |------|      |      |
-	                                |      |      |      |       |      |      |      |
-	                                `--------------------'       `--------------------'
+	,--------------------------------------------------.,--------------------------------------------------.
+	| Power  |      |      |      |      |      |      ||      |      | NmLk | KP / | KP| KP - |        |
+	|--------+------+------+------+------+-------------||------+------+------+------+------+------+--------|
+	| Sleep  |      |      |      |      |      |      ||      |      | KP 7 | KP 8 | KP 9 | KP + |        |
+	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
+	| Wake   |      |      |      |      |      |------||------|      | KP 4 | KP 5 | KP 6 | KP + |        |
+	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
+	|        |      |      |      |      |      |      ||      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
+	`--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------'
+	  |      |      |      |      |      |                            | KP 0 |      | KP . |KP Ent|      |
+	  `----------------------------------'                            `----------------------------------'
+	                                     ,-------------.,-------------.
+	                                     |      |      ||      |      |
+	                              ,------|------|------||------+------+------.
+	                              |      |      |      ||      |      |      |
+	                              |      |      |------||------|      |      |
+	                              |      |      |      ||      |      |      |
+	                              `--------------------'`--------------------'
\ No newline at end of file
-- 
cgit v1.2.3


From eb81978ecbeaa203c20df70c0c4fc56cb816ab6c Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 18 Aug 2016 00:35:32 -0700
Subject: One last formatting change

---
 keyboards/ergodox/keymaps/xyverz/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index 32e569b38c..89ac8cb044 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -105,7 +105,7 @@ For a better explanation of the layout matrices shown below, take a look at ../.
 ### Keymap 4: Keypad layer
 
 	,--------------------------------------------------.,--------------------------------------------------.
-	| Power  |      |      |      |      |      |      ||      |      | NmLk | KP / | KP| KP - |        |
+	| Power  |      |      |      |      |      |      ||      |      | NmLk | KP / | KP * | KP - |        |
 	|--------+------+------+------+------+-------------||------+------+------+------+------+------+--------|
 	| Sleep  |      |      |      |      |      |      ||      |      | KP 7 | KP 8 | KP 9 | KP + |        |
 	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
-- 
cgit v1.2.3


From aa37a57e0f55694291290f9db61d8ff352d42454 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 18 Aug 2016 00:38:25 -0700
Subject: One last change to the readme.

---
 keyboards/ergodox/keymaps/xyverz/readme.md | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index 89ac8cb044..2557493239 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -2,9 +2,7 @@
 
 ## Please Note:
 
-It will need **substantial** modification in order to work on the Infinity.
-
-PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below.
+This keymap will probably **not** work with the Infinity ErgoDox. It will need **substantial** modification in order to work on the Infinity. This is due to the fact that the mappings are based on the matrix positions in the keymap definition in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below.
 
 ## About this keymap:
 
-- 
cgit v1.2.3


From 64ecb1531067f7711a8c48e821eab546f1129757 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 09:56:11 +0200
Subject: corrected the split rshift key to reality fixed my keymap in the
 process to adjust to that

---
 keyboards/satan/keymaps/iso_split_rshift/keymap.c | 16 ++++++++--------
 keyboards/satan/satan.h                           |  4 +++-
 2 files changed, 11 insertions(+), 9 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
index bc5bfe2e63..cf938e07d5 100644
--- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -52,11 +52,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'   LEFT DWN RIGHT
      */
     [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
-        KC_GRV,   KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,   \
-        TABDUAL,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,   \
-        CAPSDUAL, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,  ENTERDUAL, \
-        KC_LSFT,  KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, TG(_SFX), ARRUP,     \
-        KC_LCTL,  KC_LGUI, KC_LALT,             SPACEDUAL,                       KC_RALT, ARRLEFT, ARRDOWN,  ARRRIGHT),
+        KC_GRV,   KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   \
+        TABDUAL,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   \
+        CAPSDUAL, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \
+        KC_LSFT,  KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, ARRUP,   TG(_SFX),      \
+        KC_LCTL,  KC_LGUI, KC_LALT,             SPACEDUAL,                       KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT),
 
     /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
      * ,-----------------------------------------------------------.
@@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_PSCR, KC_F1,   KC_F2,   KC_F3,     KC_F4,     KC_F5,     KC_F6,    KC_F7,     KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
         _______, KC_PAUS, KC_UP,   GER_BRC_L, GER_BRC_R, _______,   _______,  GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \
         _______, KC_LEFT, KC_DOWN, KC_RIGHT,  _______,   _______,   KC_LEFT,  KC_DOWN,   KC_UP,     KC_RGHT, _______, _______, _______, KC_MPLY, \
-        _______, _______, _______, _______,   GER_ANG_L, GER_ANG_R, KC_SPACE, M(0),      _______,   _______, _______, _______, _______, KC_VOLU, \
+        _______, _______, _______, _______,   GER_ANG_L, GER_ANG_R, KC_SPACE, M(0),      _______,   _______, _______, _______, KC_VOLU, _______, \
         _______, _______, _______,                                  _______,                                 _______, KC_MPRV, KC_VOLD, KC_MNXT),
 
     /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
@@ -95,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_WAKE, _______, _______, _______, _______, _______, _______, _______,    _______,  _______, _______, _______, _______, KC_INS,  \
         _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \
         _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,    KC_PGUP,  KC_END,  _______, _______, _______, KC_ENT,  \
-        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,  _______, _______, _______, _______, KC_PGUP, \
+        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,  _______, _______, _______, KC_PGUP, _______, \
         _______, _______, _______,                            _______,                                _______, KC_HOME, KC_PGDN, KC_END),
 
     /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
@@ -115,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         RESET,   _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9, _______, _______, _______, KC_BSPC, \
         _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6, _______, _______, _______, KC_BSLS, \
         _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, XXXXXXX, KC_ENT,  \
-        _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, _______, KC_UP,   \
+        _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, KC_UP,   _______, \
         _______, _______, _______,                            _______,                         _______, KC_LEFT, KC_DOWN, KC_RGHT),
 };
 
diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h
index cbc8c91bd3..6b45c955b8 100644
--- a/keyboards/satan/satan.h
+++ b/keyboards/satan/satan.h
@@ -74,12 +74,14 @@
    * |-----------------------------------------------------------|
    * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
    * `-----------------------------------------------------------'
+
+   swap 3c and 3d. 3c is right of 3d in reality
  */
 #define KEYMAP_ISO_SPLITRSHIFT( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
 	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
 	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-- 
cgit v1.2.3


From 07924511f33599267209b1f0d1ebddf400f7987d Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 18 Aug 2016 10:01:46 +0200
Subject: Small changes, renamed keymap Added MicMute Revived all dead keys
 Removed OS Shift

---
 keyboards/s60-x/keymaps/ansi_qwertz/Makefile |  21 +++
 keyboards/s60-x/keymaps/ansi_qwertz/config.h |  14 ++
 keyboards/s60-x/keymaps/ansi_qwertz/keymap.c | 236 +++++++++++++++++++++++++++
 keyboards/s60-x/keymaps/felix/Makefile       |  21 ---
 keyboards/s60-x/keymaps/felix/config.h       |  14 --
 keyboards/s60-x/keymaps/felix/keymap.c       | 213 ------------------------
 6 files changed, 271 insertions(+), 248 deletions(-)
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/Makefile
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/config.h
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/keymap.c
 delete mode 100644 keyboards/s60-x/keymaps/felix/Makefile
 delete mode 100644 keyboards/s60-x/keymaps/felix/config.h
 delete mode 100644 keyboards/s60-x/keymaps/felix/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/Makefile b/keyboards/s60-x/keymaps/ansi_qwertz/Makefile
new file mode 100644
index 0000000000..6a078bcc3f
--- /dev/null
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/config.h b/keyboards/s60-x/keymaps/ansi_qwertz/config.h
new file mode 100644
index 0000000000..6c01d579f8
--- /dev/null
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/config.h
@@ -0,0 +1,14 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// keymap needs oneshot functionality
+#undef NO_ACTION_ONESHOT
+
+#undef IS_COMMAND
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c b/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c
new file mode 100644
index 0000000000..9f59f12fa8
--- /dev/null
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c
@@ -0,0 +1,236 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+//make keymap a little easier to read
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define ONESHOT_TAP_TOGGLE 2
+#define ONESHOT_TIMEOUT 1
+
+//uncomment to activate dead keys
+//#define DONT_REVIVE_DEADKEYS 1
+
+//Function keycodes for better readability
+//SpaceFN
+//OneShot LeftShift
+//GamingMode Lock (disables SpaceFn and OneShot LShift)
+//Function
+//Mute microphone
+#define KC_SPACEFN KC_FN0
+#define KC_OSLS KC_FN3
+#define KC_GMLK KC_FN1
+#define KC_FUNC KC_FN2
+#define MICMUTE RCTL(KC_LCTL)
+
+enum function_codes {
+    F_SPACEFN = 0,
+    F_OSLS = 3,
+    F_GMLK = 1,
+    F_FUNC = 2
+};
+
+enum layer_names {
+    DEFAULT,
+    GAMING,
+    FUNCTION
+};
+
+enum languages {
+    GERMAN
+};
+
+#define LANGUAGE GERMAN
+
+enum custom_keycodes {
+    KC_CM_A = SAFE_RANGE,
+//  KC_CM_B,
+    KC_CM_C,
+//  KC_CM_D,
+    KC_CM_E,
+//  KC_CM_F,
+    KC_CM_G,
+//  KC_CM_H,
+    KC_CM_I,
+//  KC_CM_J,
+    KC_CM_K,
+    KC_CM_L,
+    KC_CM_M,
+    KC_CM_N,
+    KC_CM_O,
+    KC_CM_P,
+//  KC_CM_Q,
+    KC_CM_R,
+    KC_CM_S,
+//  KC_CM_T,
+    KC_CM_U,
+//  KC_CM_V,
+    KC_CM_W,
+//  KC_CM_X,
+//  KC_CM_Y,
+    KC_CM_Z
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layout 0: Default Layer
+    * ,-----------------------------------------------------------.
+    * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
+    * |-----------------------------------------------------------|
+    * |Tab  |  Q|  W|  E|  R|  T|  Z|  U|  I|  O|  P|  [|  ]|BckSp|
+    * |-----------------------------------------------------------|
+    * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+    * |-----------------------------------------------------------|
+    * |Shift   |  Y|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
+    * |-----------------------------------------------------------|
+    * |Fn2 |Gui |Alt |         SpaceFn       |Alt |Left|Down|Right|
+    * `-----------------------------------------------------------'
+    */
+    [DEFAULT] = KEYMAP(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Z,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           \
+        KC_LSFT, KC_NUBS, KC_Y,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
+        KC_FUNC, KC_LGUI, KC_LALT,                            KC_SPACEFN,                                  KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Layout 1: Gaming Layer, SpaceFn disabled
+    * ,-----------------------------------------------------------.
+    * |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+    * |-----------------------------------------------------------|
+    * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+    * |-----------------------------------------------------------|
+    * |      |   |   |   |   |   |   |   |   |   |   |   |        |
+    * |-----------------------------------------------------------|
+    * |        |   |   |   |   |   |   |   |   |   |   |     |Fn1 |
+    * |-----------------------------------------------------------|
+    * |   |RSft|     |          Space         |    |    |    |    |
+    * `-----------------------------------------------------------'
+    */
+    [GAMING] = KEYMAP(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GMLK,  \
+        _______, KC_RSFT,   _______,                            KC_SPC,                                    _______, _______, _______, _______
+    ),
+
+    /* Layout 2: Function Layer
+    * MicMute requires special software to be installed. Check readme.md for more information
+    * ,-----------------------------------------------------------.
+    * |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|RES|
+    * |-----------------------------------------------------------|
+    * |     |   |   |   |Prv|Ply|Nxt| � |   | � |   |Prt|Slk|Pau  |
+    * |-----------------------------------------------------------|
+    * |      | � | � |   |Vl-|Mut|Vl+|   |   |   |   |   |PEnt    |
+    * |-----------------------------------------------------------|
+    * |        |  |  |  |MicMut|Cal|   |   |   |   |Pau |PUp |Fn1 |
+    * |-----------------------------------------------------------|
+    * |    |    |    |                        |    |Home|PDn |End |
+    * `-----------------------------------------------------------'
+    */
+    [FUNCTION] = KEYMAP(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,   RESET,   \
+        _______, _______, KC_CM_W, KC_CM_E, KC_MPRV, KC_MPLY, KC_MNXT, KC_CM_U, KC_CM_I, KC_CM_O, KC_CM_P KC_PSCR, KC_SLCK, KC_PAUS, \
+        _______, KC_CM_A, KC_CM_S, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, KC_CM_K, KC_CM_L, _______, _______, _______, KC_PENT,          \
+        _______, _______, KC_CM_Y, _______, KC_CM_C, MICMUTE, KC_CALC, KC_CM_N, KC_CM_M, _______, _______, _______, _______, KC_PGUP, KC_GMLK, \
+        _______, _______, _______,                            _______,                                     _______, KC_HOME, KC_PGDN, KC_END
+    ),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+    [F_SPACEFN] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    // SpaceFn layout 1
+    [F_GMLK] = ACTION_LAYER_TOGGLE(1),                  // Disable SpaceFn and Oneshot Shift
+    [F_FUNC] = ACTION_LAYER_MOMENTARY(2),               // SpaceFn layout 1
+    [F_OSLS] = ACTION_MODS_ONESHOT(MOD_LSFT)            // Oneshot Leftshift
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_german(uint16_t keycode, keyrecord_t *record) {
+    uint16_t send_code = 0;
+    if (record->event.pressed) {
+        switch (keycode) {
+        case KC_C_AM:
+            send_code = KC_Q;
+            break;
+        case KC_C_OM:
+            send_code = KC_P;
+            break;
+        case KC_C_UM:
+            send_code = KC_Y;
+            break;
+        case KC_C_SM:
+            send_code = KC_S;
+            break;
+        }
+
+        if (send_code == 0) {
+            return true;
+        }
+        else {
+            register_code(KC_RALT);
+            register_code(send_code);
+            unregister_code(send_code);
+            unregister_code(KC_RALT);
+            return false;
+        }
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    //revive dead keys
+#ifndef DONT_REVIVE_DEADKEYS
+    bool shift_active = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_LSFT));
+    bool altgr_active = keyboard_report->mods & (MOD_BIT(KC_RALT));
+    if ((keycode == KC_QUOT && !altgr_active) || 
+        keycode == KC_GRV ||
+        (keycode == KC_6 && shift_active)) 
+    {
+        if (record->event.pressed) {
+            register_code(keycode);
+            unregister_code(keycode);
+            register_code(KC_SPACE);
+            unregister_code(KC_SPACE);
+        }
+        return false;
+    }
+#endif
+#if LANGUAGE == GERMAN
+    return process_german(keycode, record);
+#else
+    return true;
+#endif
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/Makefile b/keyboards/s60-x/keymaps/felix/Makefile
deleted file mode 100644
index 6a078bcc3f..0000000000
--- a/keyboards/s60-x/keymaps/felix/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/config.h b/keyboards/s60-x/keymaps/felix/config.h
deleted file mode 100644
index 6c01d579f8..0000000000
--- a/keyboards/s60-x/keymaps/felix/config.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// keymap needs oneshot functionality
-#undef NO_ACTION_ONESHOT
-
-#undef IS_COMMAND
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
deleted file mode 100644
index 6e40d4839f..0000000000
--- a/keyboards/s60-x/keymaps/felix/keymap.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
-Copyright 2016 Julien Pecqueur <julien@peclu.net>
-Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "s60-x.h"
-
-//make keymap a little easier to read
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-#define ONESHOT_TAP_TOGGLE 2
-#define ONESHOT_TIMEOUT 1
-
-//Special keycodes for better readability
-//SpaceFN
-//OneShot LeftShift
-//GamingMode Lock (disables SpaceFn and OneShot LShift)
-//Function
-#define KC_SPACEFN KC_FN0
-#define KC_OSLS KC_FN3
-#define KC_GMLK KC_FN1
-#define KC_FUNC KC_FN2
-
-enum function_codes {
-    F_SPACEFN = 0,
-    F_OSLS = 3,
-    F_GMLK = 1,
-    F_FUNC = 2
-};
-
-enum layer_names {
-	DEFAULT,
-	GAMING,
-	FUNCTION
-};
-
-enum languages {
-	GERMAN
-};
-
-#define LANGUAGE GERMAN
-
-enum custom_keycodes {
-	KC_C_AM = SAFE_RANGE,
-	KC_C_EM,
-	KC_C_IM,
-	KC_C_OM,
-	KC_C_UM,
-	KC_C_SM,
-	KC_C_YM,
-	KC_C_WM
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	/* Layout 0: Default Layer
-	* ,-----------------------------------------------------------.
-	* |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
-	* |-----------------------------------------------------------|
-	* |Tab  |  Q|  W|  E|  R|  T|  Z|  U|  I|  O|  P|  [|  ]|BckSp|
-	* |-----------------------------------------------------------|
-	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-	* |-----------------------------------------------------------|
-	* |Shift OS|  Y|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
-	* |-----------------------------------------------------------|
-	* |Fn2 |Gui |Alt |         SpaceFn       |Alt |Left|Down|Right|
-	* `-----------------------------------------------------------'
-	*/
-	[DEFAULT] = KEYMAP(
-		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  \
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Z,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
-		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           \
-		KC_OSLS, KC_NUBS, KC_Y,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
-		KC_FUNC, KC_LGUI, KC_LALT,                            KC_SPACEFN,                                  KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-
-	/* Layout 1: Gaming Layer, SpaceFn disabled
-	* ,-----------------------------------------------------------.
-	* |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
-	* |-----------------------------------------------------------|
-	* |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
-	* |-----------------------------------------------------------|
-	* |      |   |   |   |   |   |   |   |   |   |   |   |        |
-	* |-----------------------------------------------------------|
-	* |SFTnonOS|   |   |   |   |   |   |   |   |   |   |     |Fn1 |
-	* |-----------------------------------------------------------|
-	* |   | NOP|     |          Space         |    |    |    |    |
-	* `-----------------------------------------------------------'
-	*/
-	[GAMING] = KEYMAP(
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
-		KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GMLK,  \
-		_______, XXXXXXX,   _______,                            KC_SPC,                                    _______, _______, _______, _______
-    ),
-
-	/* Layout 2: Function Layer
-	* ,-----------------------------------------------------------.
-	* |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|RES|
-	* |-----------------------------------------------------------|
-	* |     |   |   |   |Prv|Ply|Nxt| � |   | � |   |Prt|Slk|Pau  |
-	* |-----------------------------------------------------------|
-	* |      | � | � |   |Vl-|Mut|Vl+|   |   |   |   |   |PEnt    |
-	* |-----------------------------------------------------------|
-	* | CpsLck |   |   |   |   |Cal|   |   |   |   |Pau |PUp |Fn1 |
-	* |-----------------------------------------------------------|
-	* |    |    |    |                        |    |Home|PDn |End |
-	* `-----------------------------------------------------------'
-	*/
-	[FUNCTION] = KEYMAP(
-		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,   RESET,   \
-		_______, _______, KC_C_WM, KC_C_EM, KC_MPRV, KC_MPLY, KC_MNXT, KC_C_UM, KC_C_IM, KC_C_OM, _______, KC_PSCR, KC_SLCK, KC_PAUS, \
-		_______, KC_C_AM, KC_C_SM, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_PENT,          \
-		KC_CAPS, KC_C_YM, _______, _______, _______, _______, KC_CALC, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_GMLK, \
-		_______, _______, _______,                            _______,                                     _______, KC_HOME, KC_PGDN, KC_END
-    ),
-};
-
-/*
-* Fn action definition
-*/
-const uint16_t PROGMEM fn_actions[] = {
-	[F_SPACEFN] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    // SpaceFn layout 1
-	[F_GMLK] = ACTION_LAYER_TOGGLE(1),                  // Disable SpaceFn and Oneshot Shift
-	[F_FUNC] = ACTION_LAYER_MOMENTARY(2),               // SpaceFn layout 1
-    [F_OSLS] = ACTION_MODS_ONESHOT(MOD_LSFT)            // Oneshot Leftshift
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    return MACRO_NONE;
-};
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_german(uint16_t keycode, keyrecord_t *record) {
-	uint16_t send_code = 0;
-	switch (keycode) {
-	case KC_C_AM:
-		if (record->event.pressed) {
-			send_code = KC_Q;
-		}
-		break;
-
-	case KC_C_OM:
-		if (record->event.pressed) {
-			send_code = KC_P;
-		}
-		break;
-
-	case KC_C_UM:
-		if (record->event.pressed) {
-			send_code = KC_Y;
-		}
-		break;
-
-	case KC_C_SM:
-		if (record->event.pressed) {
-			send_code = KC_S;
-		}
-		break;
-	}
-
-	if (send_code == 0) {
-		return true;
-	}
-	else {
-		register_code(KC_RALT);
-		register_code(send_code);
-		unregister_code(send_code);
-		unregister_code(KC_RALT);
-		return false;
-	}
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	if (keycode == KC_QUOT) {
-		if (record->event.pressed) {
-			register_code(KC_QUOT);
-			unregister_code(KC_QUOT);
-			register_code(KC_SPACE);
-			unregister_code(KC_SPACE);
-		}
-		return false;
-	}
-#if LANGUAGE == GERMAN
-	return process_german(keycode, record);
-#else
-	return true;
-#endif
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
\ No newline at end of file
-- 
cgit v1.2.3


From 864e26f4399e3531f3672b6494d4f47548829b88 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 10:06:13 +0200
Subject: cleanup, readability , shift swap in ISO_SPLIT_RSHIFT

---
 keyboards/satan/satan.h | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h
index 6b45c955b8..33a10292c4 100644
--- a/keyboards/satan/satan.h
+++ b/keyboards/satan/satan.h
@@ -3,6 +3,9 @@
 
 #include "quantum.h"
 
+// readability
+#define XXX KC_NO
+
 /* Satan GH60 matrix layout
    * ,-----------------------------------------------------------.
    * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
@@ -26,11 +29,11 @@
 	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
-	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1d}, \
-	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29,   k2a, k2b, KC_NO, k2d}, \
-	{k30, KC_NO, k32, k33,   k34,   k35, k36,   k37,   k38,   k39,   k3a, k3b, KC_NO, k3d}, \
-	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c,   k4d}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
 
 /* Satan HHKB matrix layout
@@ -51,15 +54,15 @@
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
 	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
-	k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,    k3d,   k3c, \
+	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
 	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09, k0a, k0b, k0c,   k0d}, \
-	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19, k1a, k1b, k1c,   k1d}, \
-	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29, k2a, k2b, KC_NO, k2d}, \
-	{k30, KC_NO, k32, k33,   k34,   k35, k36,   k37,   k38,   k39, k3a, k3b, k3c,   k3d}, \
-	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c,   k4d}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
 }
 
 /* ISO w/ split right shift key matrix layout
@@ -70,7 +73,7 @@
    * |-----------------------------------------------------------|
    * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
    * |-----------------------------------------------------------|
-   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c|   3d |
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3d  | 3c|
    * |-----------------------------------------------------------|
    * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
    * `-----------------------------------------------------------'
@@ -85,11 +88,11 @@
 	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01,   k02, k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
-	{k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1d}, \
-	{k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29,   k2a, k2b, k2c,   k2d}, \
-	{k30, k31,   k32, k33,   k34,   k35, k36,   k37,   k38,   k39,   k3a, k3b, k3c,   k3d}, \
-	{k40, k41,   k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c,   k4d}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
 
 void matrix_init_user(void);
-- 
cgit v1.2.3


From 2618260b34acade9e3239e6116a94bcfc726c00a Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 18 Aug 2016 10:37:32 +0200
Subject: Documentation overhaul.

---
 .../docs/KB_US-International-Alternative.png       |  Bin 0 -> 54748 bytes
 .../docs/KB_US-International-Alternative.svg       | 1046 +++++++++++++++++++
 ...ional-Alternative.svg.2016_08_18_09_06_36.0.svg | 1049 ++++++++++++++++++++
 .../ansi_qwertz/docs/KB_US-International.png       |  Bin 0 -> 54041 bytes
 .../ansi_qwertz/docs/KB_US-International.svg       |  935 +++++++++++++++++
 .../s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG  |  Bin 0 -> 29411 bytes
 .../keymaps/ansi_qwertz/docs/function_layer.PNG    |  Bin 0 -> 25567 bytes
 .../keymaps/ansi_qwertz/docs/gaming_layer.PNG      |  Bin 0 -> 17895 bytes
 keyboards/s60-x/keymaps/ansi_qwertz/readme.md      |  108 ++
 keyboards/s60-x/keymaps/felix/readme.md            |    9 -
 10 files changed, 3138 insertions(+), 9 deletions(-)
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.png
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg.2016_08_18_09_06_36.0.svg
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.png
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.svg
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/function_layer.PNG
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/docs/gaming_layer.PNG
 create mode 100644 keyboards/s60-x/keymaps/ansi_qwertz/readme.md
 delete mode 100644 keyboards/s60-x/keymaps/felix/readme.md

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.png b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.png
new file mode 100644
index 0000000000..168780c824
Binary files /dev/null and b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.png differ
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg
new file mode 100644
index 0000000000..f03858993e
--- /dev/null
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg
@@ -0,0 +1,1046 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="900"
+   height="300"
+   id="svg2"
+   sodipodi:version="0.32"
+   inkscape:version="0.91 r13725"
+   version="1.0"
+   sodipodi:docname="KB_US-International-Alternative.svg"
+   inkscape:output_extension="org.inkscape.output.svg.inkscape">
+  <defs
+     id="defs4">
+    <marker
+       inkscape:stockid="Arrow1Lend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Lend"
+       style="overflow:visible;">
+      <path
+         id="path5387"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.8) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Lstart"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Lstart"
+       style="overflow:visible">
+      <path
+         id="path5390"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none"
+         transform="scale(0.8)" />
+    </marker>
+    <marker
+       inkscape:stockid="Tail"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Tail"
+       style="overflow:visible">
+      <g
+         id="g5342"
+         transform="scale(-1.2)">
+        <path
+           id="path5344"
+           d="M -3.8048674,-3.9585227 L 0.54352094,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5346"
+           d="M -1.2866832,-3.9585227 L 3.0617053,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5348"
+           d="M 1.3053582,-3.9585227 L 5.6537466,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5350"
+           d="M -3.8048674,4.1775838 L 0.54352094,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5352"
+           d="M -1.2866832,4.1775838 L 3.0617053,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5354"
+           d="M 1.3053582,4.1775838 L 5.6537466,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+      </g>
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Mend"
+       style="overflow:visible;">
+      <path
+         id="path5363"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(0.6) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Lend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Lend"
+       style="overflow:visible;">
+      <path
+         id="path5369"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(1.1) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Send"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Send"
+       style="overflow:visible;">
+      <path
+         id="path5375"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.2) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Send"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Send"
+       style="overflow:visible;">
+      <path
+         id="path5357"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(0.3) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Mend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Mend"
+       style="overflow:visible;">
+      <path
+         id="path5381"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.4) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Lstart"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Lstart"
+       style="overflow:visible">
+      <path
+         id="path5372"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(1.1) translate(-5,0)" />
+    </marker>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="1.4142136"
+     inkscape:cx="435.66801"
+     inkscape:cy="291.15819"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     inkscape:grid-points="true"
+     showgrid="true"
+     gridtolerance="15px"
+     showborder="false"
+     inkscape:window-width="1920"
+     inkscape:window-height="1017"
+     inkscape:window-x="1912"
+     inkscape:window-y="-8"
+     showguides="true"
+     inkscape:guide-bbox="true"
+     inkscape:grid-bbox="true"
+     inkscape:window-maximized="1">
+    <inkscape:grid
+       id="GridFromPre046Settings"
+       type="xygrid"
+       originx="0px"
+       originy="0px"
+       spacingx="7.5px"
+       spacingy="7.5px"
+       color="#0000ff"
+       empcolor="#0000ff"
+       opacity="0.12156863"
+       empopacity="0.25098039"
+       empspacing="4" />
+  </sodipodi:namedview>
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1">
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,0 L 60,0 L 60,60 L 0,60 L 0,0 z "
+       id="rect2186" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 60,0 L 120,0 L 120,60 L 60,60 L 60,0 z "
+       id="rect2218" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 120,0 L 180,0 L 180,60 L 120,60 L 120,0 z "
+       id="rect2222" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 180,0 L 240,0 L 240,60 L 180,60 L 180,0 z "
+       id="rect2228" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 240,0 L 300,0 L 300,60 L 240,60 L 240,0 z "
+       id="rect2230" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 300,0 L 360,0 L 360,60 L 300,60 L 300,0 z "
+       id="rect2232" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 360,0 L 420,0 L 420,60 L 360,60 L 360,0 z "
+       id="rect2234" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 420,0 L 480,0 L 480,60 L 420,60 L 420,0 z "
+       id="rect2236" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 480,0 L 540,0 L 540,60 L 480,60 L 480,0 z "
+       id="rect2238" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 540,0 L 600,0 L 600,60 L 540,60 L 540,0 z "
+       id="rect2240" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 600,0 L 660,0 L 660,60 L 600,60 L 600,0 z "
+       id="rect2242" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 660,0 L 720,0 L 720,60 L 660,60 L 660,0 z "
+       id="rect2244" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 720,0 L 780,0 L 780,60 L 720,60 L 720,0 z "
+       id="rect2246" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 780,0 L 900,0 L 900,60 L 780,60 L 780,0 z "
+       id="rect2248" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,60 L 90,60 L 90,120 L 0,120 L 0,60 z "
+       id="rect2250" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 90,60 L 150,60 L 150,120 L 90,120 L 90,60 z "
+       id="rect2252" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 150,60 L 210,60 L 210,120 L 150,120 L 150,60 z "
+       id="rect2254" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 210,60 L 270,60 L 270,120 L 210,120 L 210,60 z "
+       id="rect2256" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 270,60 L 330,60 L 330,120 L 270,120 L 270,60 z "
+       id="rect2258" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 330,60 L 390,60 L 390,120 L 330,120 L 330,60 z "
+       id="rect2262" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 390,60 L 450,60 L 450,120 L 390,120 L 390,60 z "
+       id="rect2264" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 450,60 L 510,60 L 510,120 L 450,120 L 450,60 z "
+       id="rect2266" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 510,60 L 570,60 L 570,120 L 510,120 L 510,60 z "
+       id="rect2270" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 570,60 L 630,60 L 630,120 L 570,120 L 570,60 z "
+       id="rect2272" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 630,60 L 690,60 L 690,120 L 630,120 L 630,60 z "
+       id="rect2274" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 690,60 L 750,60 L 750,120 L 690,120 L 690,60 z "
+       id="rect2278" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 750,60 L 810,60 L 810,120 L 750,120 L 750,60 z "
+       id="rect2280" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 810,60 L 900,60 L 900,120 L 810,120 L 810,60 z "
+       id="rect2284" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,120 L 105,120 L 105,180 L 0,180 L 0,120 z "
+       id="rect2286" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 105,120 L 165,120 L 165,180 L 105,180 L 105,120 z "
+       id="rect2292" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 165,120 L 225,120 L 225,180 L 165,180 L 165,120 z "
+       id="rect2296" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 225,120 L 285,120 L 285,180 L 225,180 L 225,120 z "
+       id="rect2298" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 285,120 L 345,120 L 345,180 L 285,180 L 285,120 z "
+       id="rect2300" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 345,120 L 405,120 L 405,180 L 345,180 L 345,120 z "
+       id="rect2302" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 405,120 L 465,120 L 465,180 L 405,180 L 405,120 z "
+       id="rect2306" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 465,120 L 525,120 L 525,180 L 465,180 L 465,120 z "
+       id="rect2308" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 525,120 L 585,120 L 585,180 L 525,180 L 525,120 z "
+       id="rect2312" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 585,120 L 645,120 L 645,180 L 585,180 L 585,120 z "
+       id="rect2314" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 645,120 L 705,120 L 705,180 L 645,180 L 645,120 z "
+       id="rect2316" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 705,120 L 765,120 L 765,180 L 705,180 L 705,120 z "
+       id="rect2318" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 765,120 L 900,120 L 900,180 L 765,180 L 765,120 z "
+       id="rect2320" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,180 L 135,180 L 135,240 L 0,240 L 0,180 z "
+       id="rect2322" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 135,180 L 195,180 L 195,240 L 135,240 L 135,180 z "
+       id="rect2324" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 195,180 L 255,180 L 255,240 L 195,240 L 195,180 z "
+       id="rect2326" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 255,180 L 315,180 L 315,240 L 255,240 L 255,180 z "
+       id="rect2330" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 315,180 L 375,180 L 375,240 L 315,240 L 315,180 z "
+       id="rect2334" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 375,180 L 435,180 L 435,240 L 375,240 L 375,180 z "
+       id="rect2336" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 435,180 L 495,180 L 495,240 L 435,240 L 435,180 z "
+       id="rect2338" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 495,180 L 555,180 L 555,240 L 495,240 L 495,180 z "
+       id="rect2340" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 555,180 L 615,180 L 615,240 L 555,240 L 555,180 z "
+       id="rect2342" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 615,180 L 675,180 L 675,240 L 615,240 L 615,180 z "
+       id="rect2344" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 675,180 L 735,180 L 735,240 L 675,240 L 675,180 z "
+       id="rect2346" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 735,180 L 900,180 L 900,240 L 735,240 L 735,180 z "
+       id="rect2348" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,240 L 90,240 L 90,300 L 0,300 L 0,240 z "
+       id="rect2350" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 810,240 L 900,240 L 900,300 L 810,300 L 810,240 z "
+       id="rect2352" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 150,240 L 240,240 L 240,300 L 150,300 L 150,240 z "
+       id="rect2354" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 600,240 L 690,240 L 690,300 L 600,300 L 600,240 z "
+       id="rect2360" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 240,240 L 600,240 L 600,300 L 240,300 L 240,240 z "
+       id="rect2362" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 90,240 L 150,240 L 150,300 L 90,300 L 90,240 z "
+       id="rect2364" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 690,240 L 750,240 L 750,300 L 690,300 L 690,240 z "
+       id="rect2366" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 750,240 L 810,240 L 810,300 L 750,300 L 750,240 z "
+       id="rect2368" />
+    <path
+       style=""
+       d=""
+       id="flowRoot4146" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 75.351563,18.826172 L 74.4375,11.056641 L 74.4375,6.3691406 L 78.046875,6.3691406 L 78.046875,11.056641 L 77.132813,18.826172 L 75.351563,18.826172 M 74.484375,23.630859 L 74.484375,20.173828 L 77.964844,20.173828 L 77.964844,23.630859 L 74.484375,23.630859 M 75.351563,53.630859 L 75.351563,42.158203 L 71.34375,42.158203 L 71.34375,39.802734 L 71.601563,39.802734 C 73.062496,39.802748 74.124995,39.576186 74.789063,39.123047 C 75.460931,38.669937 75.855462,37.912125 75.972656,36.849609 L 78.65625,36.849609 L 78.65625,53.630859 L 75.351563,53.630859"
+       id="text5091" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 23.34375,14.220703 L 23.34375,16.810547 C 22.531233,17.365241 21.761702,17.775396 21.035156,18.041016 C 20.316391,18.298833 19.605455,18.42774 18.902344,18.427734 C 18.542956,18.42774 18.183581,18.39649 17.824219,18.333984 C 17.464832,18.27149 17.105457,18.181646 16.746094,18.064453 C 16.558583,18.001959 16.281239,17.904303 15.914063,17.771484 C 14.203116,17.185553 12.902336,16.892585 12.011719,16.892578 C 11.34765,16.892585 10.652339,17.041022 9.9257813,17.337891 C 9.2070275,17.626959 8.3984345,18.091802 7.5,18.732422 L 7.5,16.142578 C 8.3359346,15.580086 9.1328088,15.162118 9.890625,14.888672 C 10.648432,14.607431 11.363275,14.466806 12.035156,14.466797 C 12.949211,14.466806 14.085929,14.693368 15.445313,15.146484 C 15.46874,15.154305 15.484365,15.158212 15.492188,15.158203 C 15.632802,15.205087 15.847646,15.279305 16.136719,15.380859 C 17.347644,15.810555 18.285143,16.025398 18.949219,16.025391 C 19.613267,16.025398 20.29686,15.880867 21,15.591797 C 21.703109,15.302743 22.484358,14.845712 23.34375,14.220703 M 11.988281,35.033203 L 15.011719,35.033203 L 17.320313,39.369141 L 15.65625,39.369141 L 11.988281,35.033203"
+       id="text5103" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 136.47578,20.443359 C 136.04608,21.099612 135.54999,21.583986 134.9875,21.896484 C 134.42499,22.201173 133.76093,22.353517 132.99532,22.353516 C 131.76093,22.353517 130.81953,22.01758 130.1711,21.345703 C 129.53047,20.673831 129.21015,19.681645 129.21016,18.369141 C 129.21015,16.50196 129.75312,14.935556 130.83907,13.669922 C 131.93281,12.404308 133.27656,11.771496 134.87032,11.771484 C 135.4953,11.771496 136.03827,11.900402 136.49922,12.158203 C 136.96015,12.416027 137.33905,12.798839 137.63594,13.306641 L 138.25703,12.158203 L 140.34297,12.158203 L 138.62032,19.166016 C 138.59686,19.251958 138.57733,19.341801 138.56172,19.435547 C 138.54608,19.521488 138.53827,19.591801 138.53828,19.646484 C 138.53827,19.919926 138.63202,20.126957 138.81953,20.267578 C 139.00702,20.400394 139.28436,20.4668 139.65157,20.466797 C 139.95624,20.4668 140.27264,20.388675 140.60078,20.232422 C 140.9367,20.076175 141.2492,19.857426 141.53828,19.576172 C 142.21014,18.951177 142.71795,18.220709 143.06172,17.384766 C 143.41326,16.548835 143.58904,15.630867 143.58907,14.630859 C 143.58904,12.75587 142.86248,11.216809 141.40938,10.013672 C 139.96405,8.8027492 138.09686,8.1972811 135.80782,8.1972656 C 134.70624,8.1972811 133.6789,8.3300934 132.72578,8.5957031 C 131.78046,8.8613429 130.92109,9.2558737 130.14766,9.7792969 C 128.81953,10.669935 127.79609,11.783215 127.07735,13.119141 C 126.36641,14.455087 126.01094,15.91993 126.01094,17.513672 C 126.01094,19.912113 126.81953,21.83008 128.43672,23.267578 C 130.0539,24.697265 132.21406,25.412108 134.91719,25.412109 C 136.1828,25.412108 137.41718,25.220702 138.62032,24.837891 C 139.83124,24.455077 140.95623,23.90039 141.99532,23.173828 L 142.95625,24.544922 C 141.76092,25.443358 140.49139,26.119138 139.14766,26.572266 C 137.81171,27.025387 136.41718,27.25195 134.96407,27.251953 C 133.46405,27.25195 132.08515,27.060543 130.82735,26.677734 C 129.56953,26.302732 128.45234,25.744139 127.47578,25.001953 C 126.26484,24.05664 125.35859,22.966798 124.75703,21.732422 C 124.15547,20.49805 123.85469,19.099614 123.85469,17.537109 C 123.85469,16.232429 124.05781,14.990243 124.46407,13.810547 C 124.87813,12.623058 125.48359,11.544934 126.28047,10.576172 C 127.43672,9.1621238 128.82734,8.0918124 130.45235,7.3652344 C 132.07734,6.6386889 133.88593,6.275408 135.87813,6.2753906 C 137.19843,6.275408 138.43671,6.4550953 139.59297,6.8144531 C 140.75702,7.1660321 141.76873,7.6660316 142.62813,8.3144531 C 143.68279,9.1347801 144.46795,10.072279 144.9836,11.126953 C 145.50701,12.17384 145.76873,13.357432 145.76875,14.677734 C 145.76873,15.966805 145.51092,17.15821 144.99532,18.251953 C 144.48748,19.337895 143.75311,20.267581 142.79219,21.041016 C 142.2453,21.478518 141.64764,21.814455 140.99922,22.048828 C 140.35858,22.275392 139.69061,22.388673 138.99532,22.388672 C 138.16718,22.388673 137.54218,22.224611 137.12032,21.896484 C 136.70624,21.568361 136.4914,21.083987 136.47578,20.443359 M 137.06172,15.427734 C 136.96015,14.794931 136.73358,14.314462 136.38203,13.986328 C 136.03827,13.650401 135.58124,13.482432 135.01094,13.482422 C 134.1203,13.482432 133.34687,13.966807 132.69063,14.935547 C 132.03437,15.904305 131.70624,17.068366 131.70625,18.427734 C 131.70624,19.146489 131.86249,19.693363 132.175,20.068359 C 132.49531,20.443363 132.95624,20.630862 133.55782,20.630859 C 134.20624,20.630862 134.79608,20.384769 135.32735,19.892578 C 135.8664,19.400395 136.23358,18.75977 136.42891,17.970703 L 137.06172,15.427734 M 128.56563,53.630859 C 128.58125,52.130861 128.90156,50.861331 129.52657,49.822266 C 130.15156,48.775395 131.26094,47.716803 132.85469,46.646484 C 133.09687,46.482429 133.44844,46.255867 133.90938,45.966797 C 136.01875,44.615243 137.07343,43.314463 137.07344,42.064453 C 137.07343,41.322278 136.85078,40.736341 136.40547,40.306641 C 135.96015,39.876967 135.35078,39.662123 134.57735,39.662109 C 133.73359,39.662123 133.08125,39.927748 132.62032,40.458984 C 132.16719,40.982435 131.94062,41.732434 131.94063,42.708984 L 131.94063,42.849609 L 128.84688,42.849609 C 128.84688,40.927747 129.3625,39.44728 130.39375,38.408203 C 131.425,37.369157 132.89375,36.849626 134.8,36.849609 C 136.52656,36.849626 137.90546,37.322282 138.93672,38.267578 C 139.96796,39.205093 140.48358,40.455091 140.4836,42.017578 C 140.48358,43.134776 140.21405,44.103525 139.675,44.923828 C 139.13593,45.744149 138.09296,46.677741 136.5461,47.724609 C 136.21796,47.951178 135.76484,48.248052 135.18672,48.615234 C 133.71797,49.560551 132.88984,50.2793 132.70235,50.771484 L 140.31953,50.771484 L 140.31953,53.630859 L 128.56563,53.630859"
+       id="text5127" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 195.28125,13.693359 L 194.25,16.552734 L 197.19141,16.552734 L 198.19922,13.693359 L 195.28125,13.693359 M 195.28125,6.4746094 L 197.87109,6.4746094 L 196.16016,11.337891 L 198.99609,11.337891 L 200.73047,6.4746094 L 203.32031,6.4746094 L 201.58594,11.337891 L 204.90234,11.337891 L 204.03516,13.693359 L 200.75391,13.693359 L 199.76953,16.529297 L 203.16797,16.529297 L 202.33594,18.873047 L 198.92578,18.873047 L 197.19141,23.748047 L 194.60156,23.748047 L 196.33594,18.873047 L 193.47656,18.873047 L 191.73047,23.748047 L 189.15234,23.748047 L 190.86328,18.873047 L 187.5,18.873047 L 188.39063,16.529297 L 191.69531,16.529297 L 192.70313,13.693359 L 189.19922,13.693359 L 190.06641,11.337891 L 193.54688,11.337891 L 195.28125,6.4746094 M 190.07813,48.521484 L 193.30078,48.521484 C 193.30859,49.458989 193.53515,50.166019 193.98047,50.642578 C 194.42578,51.111331 195.08593,51.345705 195.96094,51.345703 C 196.80468,51.345705 197.45312,51.126956 197.90625,50.689453 C 198.36718,50.244144 198.59765,49.607426 198.59766,48.779297 C 198.59765,47.951178 198.32812,47.326178 197.78906,46.904297 C 197.2578,46.474617 196.46484,46.259773 195.41016,46.259766 C 195.35546,46.259773 195.26953,46.263679 195.15234,46.271484 C 195.04296,46.279304 194.96093,46.28321 194.90625,46.283203 L 194.90625,43.962891 L 195.26953,43.962891 C 196.23827,43.9629 196.95312,43.7754 197.41406,43.400391 C 197.8828,43.017589 198.11718,42.435558 198.11719,41.654297 C 198.11718,41.005872 197.91796,40.494154 197.51953,40.119141 C 197.1289,39.736342 196.59374,39.544936 195.91406,39.544922 C 195.17187,39.544936 194.59765,39.763686 194.19141,40.201172 C 193.78515,40.638685 193.58203,41.259778 193.58203,42.064453 L 193.58203,42.205078 L 190.41797,42.205078 C 190.45703,40.486341 190.96094,39.169936 191.92969,38.255859 C 192.90625,37.334001 194.28125,36.873064 196.05469,36.873047 C 197.73437,36.873064 199.0664,37.283219 200.05078,38.103516 C 201.03514,38.923843 201.52733,40.02931 201.52734,41.419922 C 201.52733,42.154308 201.35936,42.798839 201.02344,43.353516 C 200.68749,43.908213 200.18358,44.365244 199.51172,44.724609 C 200.37108,45.099618 201.01952,45.619149 201.45703,46.283203 C 201.90233,46.93946 202.12499,47.724615 202.125,48.638672 C 202.12499,50.318363 201.57421,51.650393 200.47266,52.634766 C 199.37108,53.619141 197.86718,54.111328 195.96094,54.111328 C 194.07812,54.111328 192.625,53.634766 191.60156,52.681641 C 190.58594,51.720705 190.07812,50.357425 190.07813,48.591797 L 190.07813,48.521484"
+       id="text5139" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 254.46094,21.451172 C 255.10155,21.365237 255.58984,21.134768 255.92578,20.759766 C 256.26171,20.384769 256.42968,19.884769 256.42969,19.259766 C 256.42968,18.705083 256.26952,18.248052 255.94922,17.888672 C 255.63671,17.52149 255.14062,17.236335 254.46094,17.033203 L 254.46094,21.451172 M 253.06641,13.435547 L 253.06641,9.4511719 C 252.45703,9.529311 251.99218,9.7402483 251.67188,10.083984 C 251.35156,10.419935 251.1914,10.87306 251.19141,11.443359 C 251.1914,11.919934 251.33984,12.318371 251.63672,12.638672 C 251.9414,12.958995 252.41796,13.22462 253.06641,13.435547 M 253.06641,26.267578 L 253.06641,24.017578 C 251.30078,23.908203 249.98047,23.396485 249.10547,22.482422 C 248.23047,21.568361 247.79297,20.24805 247.79297,18.521484 L 250.93359,18.521484 C 250.97265,19.365239 251.16796,20.033207 251.51953,20.525391 C 251.8789,21.009768 252.39453,21.318362 253.06641,21.451172 L 253.06641,16.599609 C 251.2539,16.138679 249.96484,15.537117 249.19922,14.794922 C 248.43359,14.052744 248.05078,13.03712 248.05078,11.748047 C 248.05078,10.318373 248.5039,9.1660301 249.41016,8.2910156 C 250.32422,7.4160318 251.54296,6.959001 253.06641,6.9199219 L 253.06641,5.4199219 L 254.46094,5.4199219 L 254.46094,6.9199219 C 255.98437,6.9980635 257.17186,7.4590005 258.02344,8.3027344 C 258.87499,9.1386864 259.34374,10.318373 259.42969,11.841797 L 256.24219,11.841797 C 256.18749,11.115247 256.01171,10.56056 255.71484,10.177734 C 255.42577,9.7871232 255.0078,9.5683734 254.46094,9.5214844 L 254.46094,13.787109 C 256.39062,14.388681 257.74999,15.07618 258.53906,15.849609 C 259.32811,16.623054 259.72264,17.642584 259.72266,18.908203 C 259.72264,20.400394 259.26171,21.591799 258.33984,22.482422 C 257.42577,23.373047 256.1328,23.892578 254.46094,24.041016 L 254.46094,26.267578 L 253.06641,26.267578 M 254.64844,47.419922 L 254.64844,40.236328 L 250.08984,47.419922 L 254.64844,47.419922 M 254.57813,53.630859 L 254.57813,50.009766 L 247.5,50.009766 L 247.5,47.056641 L 253.6875,37.330078 L 257.84766,37.330078 L 257.84766,47.337891 L 259.79297,47.337891 L 259.79297,50.009766 L 257.84766,50.009766 L 257.84766,53.630859 L 254.57813,53.630859"
+       id="text5145" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 320.42578,19.740234 C 320.42577,20.263675 320.60155,20.705081 320.95313,21.064453 C 321.30467,21.416018 321.73827,21.591799 322.25391,21.591797 C 322.75389,21.591799 323.18358,21.412112 323.54297,21.052734 C 323.90233,20.68555 324.08201,20.24805 324.08203,19.740234 C 324.08201,19.240239 323.90233,18.814458 323.54297,18.462891 C 323.19139,18.103521 322.7617,17.923834 322.25391,17.923828 C 321.73827,17.923834 321.30467,18.099615 320.95313,18.451172 C 320.60155,18.794927 320.42577,19.224614 320.42578,19.740234 M 317.88281,19.740234 C 317.8828,18.521489 318.30468,17.494147 319.14844,16.658203 C 319.99217,15.822273 321.02733,15.404305 322.25391,15.404297 C 323.45701,15.404305 324.48045,15.830086 325.32422,16.681641 C 326.17576,17.525397 326.60154,18.544927 326.60156,19.740234 C 326.60154,20.943362 326.17576,21.974611 325.32422,22.833984 C 324.47264,23.685547 323.4492,24.111328 322.25391,24.111328 C 321.02733,24.111328 319.99217,23.689453 319.14844,22.845703 C 318.30468,22.001955 317.8828,20.9668 317.88281,19.740234 M 311.07422,24.111328 L 321.08203,6.8496094 L 322.96875,6.8496094 L 312.96094,24.111328 L 311.07422,24.111328 M 310.04297,11.220703 C 310.04297,11.73634 310.21484,12.169933 310.55859,12.521484 C 310.91015,12.873058 311.34375,13.048839 311.85938,13.048828 C 312.36718,13.048839 312.79687,12.873058 313.14844,12.521484 C 313.50781,12.162121 313.68749,11.728528 313.6875,11.220703 C 313.68749,10.720716 313.50781,10.294935 313.14844,9.9433594 C 312.79687,9.5839984 312.36718,9.4043111 311.85938,9.4042969 C 311.34375,9.4043111 310.91015,9.5800922 310.55859,9.9316406 C 310.21484,10.275404 310.04297,10.705091 310.04297,11.220703 M 307.5,11.220703 C 307.5,10.001967 307.92187,8.9707178 308.76563,8.1269531 C 309.60937,7.275407 310.64062,6.8496262 311.85938,6.8496094 C 313.06249,6.8496262 314.08593,7.2793132 314.92969,8.1386719 C 315.78124,8.990249 316.20702,10.017592 316.20703,11.220703 C 316.20702,12.423839 315.78124,13.451182 314.92969,14.302734 C 314.08593,15.146493 313.06249,15.568367 311.85938,15.568359 C 310.63281,15.568367 309.59765,15.150399 308.75391,14.314453 C 307.91797,13.478526 307.5,12.447277 307.5,11.220703 M 310.85156,49.119141 L 314.13281,49.119141 C 314.1875,49.853519 314.43359,50.423831 314.87109,50.830078 C 315.30859,51.228518 315.89453,51.427737 316.62891,51.427734 C 317.53515,51.427737 318.22655,51.162112 318.70313,50.630859 C 319.18749,50.099613 319.42968,49.337895 319.42969,48.345703 C 319.42968,47.416022 319.18358,46.685554 318.69141,46.154297 C 318.19921,45.615242 317.51952,45.345711 316.65234,45.345703 C 316.16796,45.345711 315.74218,45.443368 315.375,45.638672 C 315.00781,45.833992 314.69531,46.123054 314.4375,46.505859 L 311.41406,46.330078 L 312.50391,37.330078 L 322.14844,37.330078 L 322.14844,40.166016 L 314.87109,40.166016 L 314.4375,43.529297 C 314.80468,43.240245 315.22656,43.025401 315.70313,42.884766 C 316.17968,42.736339 316.71093,42.66212 317.29688,42.662109 C 318.96874,42.66212 320.3164,43.169932 321.33984,44.185547 C 322.37108,45.20118 322.88671,46.53321 322.88672,48.181641 C 322.88671,49.986332 322.3203,51.427737 321.1875,52.505859 C 320.05468,53.576172 318.53515,54.111328 316.62891,54.111328 C 314.89453,54.111328 313.51172,53.669922 312.48047,52.787109 C 311.45703,51.896486 310.91406,50.673831 310.85156,49.119141"
+       id="text5151" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 372.15234,48.298828 C 372.15234,49.25977 372.39062,50.021488 372.86719,50.583984 C 373.35156,51.146487 374.00781,51.427737 374.83594,51.427734 C 375.60937,51.427737 376.21484,51.154299 376.65234,50.607422 C 377.08983,50.06055 377.30858,49.298832 377.30859,48.322266 C 377.30858,47.423834 377.08202,46.724616 376.62891,46.224609 C 376.17577,45.724617 375.53905,45.474618 374.71875,45.474609 C 373.91406,45.474618 373.28515,45.724617 372.83203,46.224609 C 372.3789,46.724616 372.15234,47.416022 372.15234,48.298828 M 372.10547,43.916016 C 372.48828,43.525401 372.94921,43.232432 373.48828,43.037109 C 374.02734,42.833995 374.6289,42.732433 375.29297,42.732422 C 376.93358,42.732433 378.24608,43.232432 379.23047,44.232422 C 380.22264,45.23243 380.71874,46.56446 380.71875,48.228516 C 380.71874,49.994144 380.17968,51.419924 379.10156,52.505859 C 378.02343,53.591797 376.60155,54.134765 374.83594,54.134766 C 372.79687,54.134765 371.24609,53.431641 370.18359,52.025391 C 369.1289,50.619144 368.60156,48.560552 368.60156,45.849609 C 368.60156,42.935558 369.16797,40.708997 370.30078,39.169922 C 371.43359,37.623063 373.0664,36.849626 375.19922,36.849609 C 376.68358,36.849626 377.8789,37.236345 378.78516,38.009766 C 379.69921,38.783218 380.19921,39.830092 380.28516,41.150391 L 376.88672,41.150391 C 376.80858,40.611341 376.59765,40.205092 376.25391,39.931641 C 375.91015,39.658217 375.42968,39.521498 374.8125,39.521484 C 373.96874,39.521498 373.32031,39.888686 372.86719,40.623047 C 372.41406,41.349622 372.16015,42.447277 372.10547,43.916016"
+       id="text5157" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 432.85547,16.095703 L 431.96484,16.740234 C 431.60546,16.990241 431.33593,17.291022 431.15625,17.642578 C 430.97656,17.994146 430.88671,18.388677 430.88672,18.826172 C 430.88671,19.490239 431.11328,20.048832 431.56641,20.501953 C 432.01953,20.955081 432.58593,21.181643 433.26563,21.181641 C 433.76562,21.181643 434.24218,21.080081 434.69531,20.876953 C 435.15624,20.666019 435.58202,20.361331 435.97266,19.962891 L 432.85547,16.095703 M 433.79297,12.404297 L 434.20313,12.111328 C 434.57812,11.853527 434.85546,11.564465 435.03516,11.244141 C 435.21483,10.923841 435.30468,10.556654 435.30469,10.142578 C 435.30468,9.7441545 435.17968,9.4277486 434.92969,9.1933594 C 434.68749,8.958999 434.35546,8.8418117 433.93359,8.8417969 C 433.5039,8.8418117 433.16406,8.9629053 432.91406,9.2050781 C 432.66406,9.4394673 432.53906,9.7597795 432.53906,10.166016 C 432.53906,10.384779 432.59765,10.62306 432.71484,10.880859 C 432.83984,11.138684 433.01562,11.412122 433.24219,11.701172 L 433.79297,12.404297 M 431.15625,13.962891 L 430.47656,13.072266 C 430.125,12.603527 429.87109,12.166027 429.71484,11.759766 C 429.5664,11.345715 429.49218,10.912122 429.49219,10.458984 C 429.49218,9.2089988 429.89062,8.2168123 430.6875,7.4824219 C 431.49218,6.7402513 432.58203,6.3691579 433.95703,6.3691406 C 435.27733,6.3691579 436.3203,6.7090013 437.08594,7.3886719 C 437.85155,8.0683749 438.23436,8.9863428 438.23438,10.142578 C 438.23436,11.017591 438.0078,11.802746 437.55469,12.498047 C 437.10936,13.185557 436.40624,13.833994 435.44531,14.443359 L 437.91797,17.490234 C 438.15233,17.107428 438.33593,16.677741 438.46875,16.201172 C 438.60936,15.724617 438.70702,15.193368 438.76172,14.607422 L 441.80859,14.607422 C 441.72264,15.623055 441.5117,16.56446 441.17578,17.431641 C 440.83983,18.298833 440.37889,19.091801 439.79297,19.810547 L 442.93359,23.630859 L 438.94922,23.630859 L 437.77734,22.189453 C 437.08983,22.822266 436.33202,23.302735 435.50391,23.630859 C 434.68359,23.951172 433.82421,24.111328 432.92578,24.111328 C 431.33203,24.111328 430.02734,23.638672 429.01172,22.693359 C 428.0039,21.748049 427.5,20.541019 427.5,19.072266 C 427.5,17.978521 427.78125,17.037116 428.34375,16.248047 C 428.90625,15.458993 429.84375,14.697275 431.15625,13.962891 M 434.66016,53.630859 L 431.15625,53.630859 C 431.28125,51.341799 431.83203,49.07227 432.80859,46.822266 C 433.79296,44.572275 435.19531,42.361339 437.01563,40.189453 L 428.76563,40.189453 L 428.76563,37.330078 L 440.66016,37.330078 L 440.66016,39.849609 C 438.8164,41.880871 437.39843,44.029306 436.40625,46.294922 C 435.42187,48.560552 434.83984,51.005862 434.66016,53.630859"
+       id="text5163" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 493.5,13.212891 L 491.4375,16.119141 L 489.44531,14.724609 L 491.69531,11.900391 L 488.41406,10.986328 L 489.17578,8.6074219 L 492.32813,9.7324219 L 492.32813,6.3691406 L 494.64844,6.3691406 L 494.64844,9.7324219 L 497.80078,8.6308594 L 498.58594,11.009766 L 495.30469,11.900391 L 497.53125,14.701172 L 495.49219,16.166016 L 493.5,13.212891 M 490.875,48.755859 C 490.875,49.576176 491.10156,50.208988 491.55469,50.654297 C 492.01562,51.099612 492.67187,51.322268 493.52344,51.322266 C 494.33593,51.322268 494.97265,51.095706 495.43359,50.642578 C 495.90233,50.189457 496.13671,49.560551 496.13672,48.755859 C 496.13671,47.982428 495.89843,47.361334 495.42188,46.892578 C 494.9453,46.423835 494.31249,46.189461 493.52344,46.189453 C 492.73437,46.189461 492.09374,46.427742 491.60156,46.904297 C 491.11718,47.380866 490.875,47.998053 490.875,48.755859 M 491.14453,41.560547 C 491.14453,42.208996 491.34765,42.708995 491.75391,43.060547 C 492.16015,43.404307 492.74218,43.576182 493.5,43.576172 C 494.2578,43.576182 494.83984,43.400401 495.24609,43.048828 C 495.66015,42.697277 495.86718,42.201183 495.86719,41.560547 C 495.86718,40.93556 495.65624,40.443373 495.23438,40.083984 C 494.81249,39.724623 494.23437,39.544936 493.5,39.544922 C 492.78124,39.544936 492.20703,39.72853 491.77734,40.095703 C 491.35546,40.462904 491.14453,40.951185 491.14453,41.560547 M 489.9375,44.818359 C 489.23437,44.427744 488.72656,43.970713 488.41406,43.447266 C 488.10156,42.923839 487.94531,42.255871 487.94531,41.443359 C 487.94531,40.005873 488.4375,38.876968 489.42188,38.056641 C 490.40625,37.236345 491.76562,36.826189 493.5,36.826172 C 495.24999,36.826189 496.61718,37.236345 497.60156,38.056641 C 498.59374,38.869155 499.08983,39.998061 499.08984,41.443359 C 499.08983,42.216808 498.92186,42.888683 498.58594,43.458984 C 498.24999,44.021494 497.74608,44.474619 497.07422,44.818359 C 497.89452,45.20118 498.51171,45.73243 498.92578,46.412109 C 499.33983,47.083991 499.54686,47.904303 499.54688,48.873047 C 499.54686,50.505862 499.0078,51.787111 497.92969,52.716797 C 496.85936,53.646484 495.3828,54.111328 493.5,54.111328 C 491.59375,54.111328 490.11328,53.650391 489.05859,52.728516 C 488.0039,51.806642 487.47656,50.521487 487.47656,48.873047 C 487.47656,47.912115 487.67187,47.107428 488.0625,46.458984 C 488.46094,45.802742 489.08594,45.255868 489.9375,44.818359"
+       id="text5169" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 557.85938,6.3691406 C 556.78124,8.1347811 555.98046,9.9316543 555.45703,11.759766 C 554.93359,13.587901 554.67187,15.505868 554.67188,17.513672 C 554.67187,19.513676 554.93359,21.427737 555.45703,23.255859 C 555.98046,25.083983 556.78124,26.880856 557.85938,28.646484 L 555.38672,28.646484 C 554.01953,26.779294 552.98046,24.904296 552.26953,23.021484 C 551.5664,21.130862 551.21484,19.294926 551.21484,17.513672 C 551.21484,15.73243 551.5664,13.896494 552.26953,12.005859 C 552.98046,10.115248 554.01953,8.2363435 555.38672,6.3691406 L 557.85938,6.3691406 M 556.06641,42.685547 C 556.0664,41.724621 555.82421,40.96681 555.33984,40.412109 C 554.86327,39.849623 554.21093,39.568373 553.38281,39.568359 C 552.60156,39.568373 551.99218,39.837904 551.55469,40.376953 C 551.125,40.916028 550.91015,41.669934 550.91016,42.638672 C 550.91015,43.544932 551.13671,44.251963 551.58984,44.759766 C 552.04296,45.267586 552.67968,45.521492 553.5,45.521484 C 554.30468,45.521492 554.93359,45.271493 555.38672,44.771484 C 555.83983,44.271494 556.0664,43.576182 556.06641,42.685547 M 556.125,47.056641 C 555.73437,47.447272 555.27343,47.74024 554.74219,47.935547 C 554.21093,48.130865 553.61327,48.228521 552.94922,48.228516 C 551.30078,48.228521 549.98047,47.732428 548.98828,46.740234 C 547.99609,45.748055 547.5,44.419931 547.5,42.755859 C 547.5,40.990247 548.03906,39.564467 549.11719,38.478516 C 550.19531,37.392594 551.61718,36.849626 553.38281,36.849609 C 555.42968,36.849626 556.98436,37.556657 558.04688,38.970703 C 559.11718,40.376966 559.65233,42.431652 559.65234,45.134766 C 559.65233,48.041021 559.08202,50.267581 557.94141,51.814453 C 556.80077,53.361328 555.16015,54.134765 553.01953,54.134766 C 551.54296,54.134765 550.35156,53.751953 549.44531,52.986328 C 548.53906,52.212892 548.04297,51.162112 547.95703,49.833984 L 551.34375,49.845703 C 551.42187,50.384769 551.63281,50.787112 551.97656,51.052734 C 552.32031,51.318362 552.80468,51.451174 553.42969,51.451172 C 554.27343,51.451174 554.91796,51.083987 555.36328,50.349609 C 555.80858,49.615238 556.06249,48.517583 556.125,47.056641"
+       id="text5175" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 609.375,6.3691406 L 611.87109,6.3691406 C 613.23046,8.228531 614.26171,10.103529 614.96484,11.994141 C 615.66796,13.876963 616.01952,15.716805 616.01953,17.513672 C 616.01952,19.302739 615.66796,21.142581 614.96484,23.033203 C 614.26171,24.923827 613.23046,26.794919 611.87109,28.646484 L 609.375,28.646484 C 610.46094,26.873044 611.26562,25.072264 611.78906,23.244141 C 612.32031,21.408205 612.58593,19.498051 612.58594,17.513672 C 612.58593,15.521492 612.32031,13.611338 611.78906,11.783203 C 611.26562,9.9550918 610.46094,8.1504061 609.375,6.3691406 M 610.98047,45.474609 C 610.98046,47.513678 611.18359,48.994145 611.58984,49.916016 C 612.0039,50.837893 612.66015,51.29883 613.55859,51.298828 C 614.45702,51.29883 615.11327,50.833987 615.52734,49.904297 C 615.9414,48.974614 616.14843,47.498053 616.14844,45.474609 C 616.14843,43.44337 615.9414,41.966809 615.52734,41.044922 C 615.11327,40.12306 614.45702,39.662123 613.55859,39.662109 C 612.66015,39.662123 612.0039,40.12306 611.58984,41.044922 C 611.18359,41.958996 610.98046,43.435557 610.98047,45.474609 M 607.5,45.474609 C 607.5,42.591808 608,40.43556 609,39.005859 C 610.00781,37.568375 611.52734,36.849626 613.55859,36.849609 C 615.58202,36.849626 617.09765,37.572282 618.10547,39.017578 C 619.12108,40.455091 619.62889,42.615245 619.62891,45.498047 C 619.62889,48.380865 619.12499,50.533206 618.11719,51.955078 C 617.11718,53.376953 615.59765,54.08789 613.55859,54.087891 C 611.52734,54.08789 610.00781,53.373047 609,51.943359 C 608,50.513675 607.5,48.357427 607.5,45.474609"
+       id="text5181" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 667.5,26.900391 L 679.5,26.900391 L 679.5,29.291016 L 667.5,29.291016 L 667.5,26.900391 M 670.20703,48.849609 L 670.20703,45.638672 L 676.79297,45.638672 L 676.79297,48.849609 L 670.20703,48.849609"
+       id="text5187" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 733.33594,9.3222656 L 735.70313,9.3222656 L 735.70313,15.298828 L 741.53906,15.298828 L 741.53906,17.630859 L 735.70313,17.630859 L 735.70313,23.630859 L 733.33594,23.630859 L 733.33594,17.630859 L 727.5,17.630859 L 727.5,15.298828 L 733.33594,15.298828 L 733.33594,9.3222656 M 727.5,47.818359 L 741.53906,47.818359 L 741.53906,50.150391 L 727.5,50.150391 L 727.5,47.818359 M 727.5,42.779297 L 741.53906,42.779297 L 741.53906,45.111328 L 727.5,45.111328 L 727.5,42.779297"
+       id="text5201" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 11.070313,95.601563 L 11.070313,86.148438 L 7.65625,86.148438 L 7.65625,84.09375 L 16.828125,84.09375 L 16.828125,86.148438 L 13.4375,86.148438 L 13.4375,95.601563 L 11.070313,95.601563 M 22.859375,94.546875 C 22.572911,94.989584 22.197911,95.328125 21.734375,95.5625 C 21.270829,95.791666 20.731767,95.90625 20.117188,95.90625 C 19.294269,95.90625 18.658853,95.671875 18.210938,95.203125 C 17.768228,94.734376 17.546874,94.06771 17.546875,93.203125 C 17.546874,92.401045 17.768228,91.789066 18.210938,91.367188 C 18.658853,90.945317 19.395831,90.656255 20.421875,90.5 C 20.656246,90.463547 20.963538,90.42188 21.34375,90.375 C 22.307286,90.250005 22.789057,89.97136 22.789063,89.539063 C 22.789057,89.195319 22.682286,88.950527 22.46875,88.804688 C 22.255203,88.653653 21.898433,88.578132 21.398438,88.578125 C 20.9401,88.578132 20.588538,88.669278 20.34375,88.851563 C 20.098955,89.033861 19.97656,89.294277 19.976563,89.632813 L 19.976563,89.757813 L 17.851563,89.757813 L 17.851563,89.601563 C 17.851562,88.731778 18.158853,88.049487 18.773438,87.554688 C 19.388018,87.054696 20.236976,86.804696 21.320313,86.804688 C 22.507807,86.804696 23.41666,87.010425 24.046875,87.421875 C 24.682284,87.833341 24.999992,88.427091 25,89.203125 L 25,94.03125 C 24.999992,94.385418 25.03645,94.651043 25.109375,94.828125 C 25.182283,95.000001 25.304679,95.130209 25.476563,95.21875 L 25.476563,95.601563 L 23.109375,95.601563 C 23.031244,95.455729 22.971348,95.294271 22.929688,95.117188 C 22.888015,94.940105 22.864577,94.750001 22.859375,94.546875 M 22.820313,91.421875 C 22.450515,91.593754 22.023432,91.731775 21.539063,91.835938 C 21.059892,91.940108 20.812496,91.994795 20.796875,92 C 20.39583,92.114587 20.11458,92.257816 19.953125,92.429688 C 19.796872,92.601566 19.718747,92.838544 19.71875,93.140625 C 19.718747,93.453127 19.82031,93.703127 20.023438,93.890625 C 20.226559,94.072918 20.499997,94.164064 20.84375,94.164063 C 21.458329,94.164064 21.940099,93.992189 22.289063,93.648438 C 22.643224,93.299481 22.820307,92.825524 22.820313,92.226563 L 22.820313,91.421875 M 27.039063,84.09375 L 29.25,84.09375 L 29.25,88.164063 C 29.531246,87.721362 29.882809,87.388029 30.304688,87.164063 C 30.731766,86.934905 31.216141,86.820321 31.757813,86.820313 C 32.783847,86.820321 33.622388,87.2448 34.273438,88.09375 C 34.92447,88.937507 35.249991,90.036464 35.25,91.390625 C 35.249991,92.734378 34.92447,93.820314 34.273438,94.648438 C 33.622388,95.476563 32.773431,95.890625 31.726563,95.890625 C 31.179682,95.890625 30.70312,95.776041 30.296875,95.546875 C 29.895829,95.317709 29.531246,94.953126 29.203125,94.453125 L 29.203125,95.601563 L 27.039063,95.601563 L 27.039063,84.09375 M 32.992188,91.296875 C 32.992181,90.51563 32.828118,89.903652 32.5,89.460938 C 32.171869,89.013027 31.721348,88.789069 31.148438,88.789063 C 30.544266,88.789069 30.075517,89.007819 29.742188,89.445313 C 29.414059,89.87761 29.249997,90.494797 29.25,91.296875 C 29.249997,92.161462 29.406247,92.817711 29.71875,93.265625 C 30.036454,93.713544 30.497391,93.937502 31.101563,93.9375 C 31.71614,93.937502 32.18489,93.713544 32.507813,93.265625 C 32.830722,92.812503 32.992181,92.156253 32.992188,91.296875"
+       id="text5427" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 789.76563,44.369141 L 792.57031,44.369141 C 793.23176,44.369143 793.71353,44.249351 794.01563,44.009766 C 794.3177,43.770185 794.46874,43.392581 794.46875,42.876953 C 794.46874,42.340499 794.3203,41.955083 794.02344,41.720703 C 793.72656,41.481125 793.23697,41.361333 792.55469,41.361328 L 789.76563,41.361328 L 789.76563,44.369141 M 789.76563,39.392578 L 792.46875,39.392578 C 793.05208,39.392585 793.47916,39.293627 793.75,39.095703 C 794.02083,38.892586 794.15624,38.574878 794.15625,38.142578 C 794.15624,37.720712 794.02343,37.416025 793.75781,37.228516 C 793.49739,37.035817 793.06249,36.939463 792.45313,36.939453 L 789.76563,36.939453 L 789.76563,39.392578 M 787.5,46.447266 L 787.5,34.939453 L 792.92188,34.939453 C 794.09895,34.939465 794.99478,35.189464 795.60938,35.689453 C 796.22916,36.184255 796.53905,36.905609 796.53906,37.853516 C 796.53905,38.436857 796.42447,38.923836 796.19531,39.314453 C 795.96614,39.705085 795.62239,40.007168 795.16406,40.220703 C 795.7578,40.460292 796.20051,40.806646 796.49219,41.259766 C 796.78905,41.707687 796.93749,42.267582 796.9375,42.939453 C 796.93749,44.059247 796.57291,44.92383 795.84375,45.533203 C 795.11457,46.142578 794.08072,46.447266 792.74219,46.447266 L 787.5,46.447266 M 803.45313,45.392578 C 803.16666,45.835287 802.79166,46.173828 802.32813,46.408203 C 801.86458,46.63737 801.32552,46.751953 800.71094,46.751953 C 799.88802,46.751953 799.2526,46.517578 798.80469,46.048828 C 798.36198,45.580079 798.14062,44.913413 798.14063,44.048828 C 798.14062,43.246748 798.36198,42.634769 798.80469,42.212891 C 799.2526,41.79102 799.98958,41.501958 801.01563,41.345703 C 801.25,41.30925 801.55729,41.267583 801.9375,41.220703 C 802.90104,41.095708 803.38281,40.817063 803.38281,40.384766 C 803.38281,40.041022 803.27604,39.796231 803.0625,39.650391 C 802.84895,39.499356 802.49218,39.423835 801.99219,39.423828 C 801.53385,39.423835 801.18229,39.514981 800.9375,39.697266 C 800.69271,39.879564 800.57031,40.13998 800.57031,40.478516 L 800.57031,40.603516 L 798.44531,40.603516 L 798.44531,40.447266 C 798.44531,39.577481 798.7526,38.89519 799.36719,38.400391 C 799.98177,37.900399 800.83073,37.650399 801.91406,37.650391 C 803.10156,37.650399 804.01041,37.856128 804.64063,38.267578 C 805.27603,38.679044 805.59374,39.272794 805.59375,40.048828 L 805.59375,44.876953 C 805.59374,45.231121 805.6302,45.496746 805.70313,45.673828 C 805.77603,45.845704 805.89843,45.975912 806.07031,46.064453 L 806.07031,46.447266 L 803.70313,46.447266 C 803.62499,46.301432 803.5651,46.139974 803.52344,45.962891 C 803.48176,45.785808 803.45833,45.595704 803.45313,45.392578 M 803.41406,42.267578 C 803.04427,42.439457 802.61718,42.577478 802.13281,42.681641 C 801.65364,42.785811 801.40625,42.840498 801.39063,42.845703 C 800.98958,42.96029 800.70833,43.103519 800.54688,43.275391 C 800.39062,43.447269 800.3125,43.684248 800.3125,43.986328 C 800.3125,44.29883 800.41406,44.54883 800.61719,44.736328 C 800.82031,44.918621 801.09375,45.009767 801.4375,45.009766 C 802.05208,45.009767 802.53385,44.837892 802.88281,44.494141 C 803.23697,44.145185 803.41406,43.671227 803.41406,43.072266 L 803.41406,42.267578 M 812.71875,43.244141 L 814.96094,43.244141 C 814.86718,44.322268 814.47395,45.173829 813.78125,45.798828 C 813.08854,46.423828 812.19791,46.736328 811.10938,46.736328 C 809.875,46.736328 808.90625,46.335287 808.20313,45.533203 C 807.50521,44.725913 807.15625,43.611331 807.15625,42.189453 C 807.15625,40.772792 807.51302,39.663418 808.22656,38.861328 C 808.94531,38.054045 809.93229,37.650399 811.1875,37.650391 C 812.28645,37.650399 813.16666,37.942066 813.82813,38.525391 C 814.49478,39.108731 814.86718,39.92123 814.94531,40.962891 L 812.6875,40.962891 C 812.62499,40.509772 812.46614,40.163418 812.21094,39.923828 C 811.95572,39.684252 811.61979,39.56446 811.20313,39.564453 C 810.64062,39.56446 810.21875,39.785814 809.9375,40.228516 C 809.66146,40.67123 809.52343,41.335292 809.52344,42.220703 C 809.52343,43.038415 809.66666,43.668623 809.95313,44.111328 C 810.24479,44.54883 810.66145,44.76758 811.20313,44.767578 C 811.62499,44.76758 811.96354,44.639976 812.21875,44.384766 C 812.47395,44.12956 812.64062,43.749352 812.71875,43.244141 M 816.44531,46.447266 L 816.44531,34.939453 L 818.65625,34.939453 L 818.65625,40.978516 L 821.35938,37.955078 L 824.09375,37.955078 L 821.13281,41.103516 L 824.27344,46.447266 L 821.54688,46.447266 L 819.51563,42.830078 L 818.65625,43.759766 L 818.65625,46.447266 L 816.44531,46.447266 M 824.79688,43.681641 L 827.0625,43.681641 C 827.08333,44.113935 827.23958,44.436851 827.53125,44.650391 C 827.82291,44.858726 828.26041,44.962892 828.84375,44.962891 C 829.28645,44.962892 829.6276,44.889976 829.86719,44.744141 C 830.11197,44.593101 830.23437,44.382164 830.23438,44.111328 C 830.23437,43.725914 829.78124,43.436852 828.875,43.244141 C 828.5052,43.166019 828.21093,43.098311 827.99219,43.041016 C 826.88802,42.759769 826.11979,42.426436 825.6875,42.041016 C 825.26042,41.655604 825.04687,41.134771 825.04688,40.478516 C 825.04687,39.608731 825.35937,38.921231 825.98438,38.416016 C 826.61458,37.905608 827.46614,37.650399 828.53906,37.650391 C 829.67447,37.650399 830.5651,37.903003 831.21094,38.408203 C 831.86197,38.913419 832.20833,39.624356 832.25,40.541016 L 830.03906,40.541016 C 830.02343,40.181647 829.88541,39.903001 829.625,39.705078 C 829.36979,39.507168 829.01302,39.40821 828.55469,39.408203 C 828.12239,39.40821 827.79948,39.473314 827.58594,39.603516 C 827.3776,39.733731 827.27343,39.929043 827.27344,40.189453 C 827.27343,40.528001 827.83854,40.82748 828.96875,41.087891 C 829.22916,41.145188 829.43489,41.192063 829.58594,41.228516 C 830.71614,41.494146 831.48697,41.814458 831.89844,42.189453 C 832.3151,42.564457 832.52343,43.093102 832.52344,43.775391 C 832.52343,44.738934 832.18228,45.473308 831.5,45.978516 C 830.82291,46.483724 829.83593,46.736328 828.53906,46.736328 C 827.36718,46.736328 826.45052,46.473307 825.78906,45.947266 C 825.1276,45.421225 824.79687,44.697267 824.79688,43.775391 L 824.79688,43.681641 M 840.02344,42.251953 C 840.02343,41.397792 839.86197,40.74675 839.53906,40.298828 C 839.21614,39.84571 838.74739,39.619147 838.13281,39.619141 C 837.52864,39.619147 837.0677,39.843106 836.75,40.291016 C 836.4375,40.738938 836.28125,41.392583 836.28125,42.251953 C 836.28125,43.05404 836.44531,43.673831 836.77344,44.111328 C 837.10677,44.54883 837.57552,44.76758 838.17969,44.767578 C 838.7526,44.76758 839.20312,44.543622 839.53125,44.095703 C 839.85937,43.647789 840.02343,43.033207 840.02344,42.251953 M 834.07031,49.853516 L 834.07031,37.955078 L 836.23438,37.955078 L 836.23438,39.103516 C 836.5625,38.603523 836.92708,38.23894 837.32813,38.009766 C 837.73437,37.780608 838.21093,37.666024 838.75781,37.666016 C 839.80468,37.666024 840.65364,38.080086 841.30469,38.908203 C 841.95572,39.731127 842.28124,40.814459 842.28125,42.158203 C 842.28124,43.517581 841.95572,44.621747 841.30469,45.470703 C 840.65364,46.314453 839.8151,46.736328 838.78906,46.736328 C 838.24739,46.736328 837.76302,46.621745 837.33594,46.392578 C 836.91406,46.163412 836.5625,45.830079 836.28125,45.392578 L 836.28125,49.853516 L 834.07031,49.853516 M 848.70313,45.392578 C 848.41666,45.835287 848.04166,46.173828 847.57813,46.408203 C 847.11458,46.63737 846.57552,46.751953 845.96094,46.751953 C 845.13802,46.751953 844.5026,46.517578 844.05469,46.048828 C 843.61198,45.580079 843.39062,44.913413 843.39063,44.048828 C 843.39062,43.246748 843.61198,42.634769 844.05469,42.212891 C 844.5026,41.79102 845.23958,41.501958 846.26563,41.345703 C 846.5,41.30925 846.80729,41.267583 847.1875,41.220703 C 848.15104,41.095708 848.63281,40.817063 848.63281,40.384766 C 848.63281,40.041022 848.52604,39.796231 848.3125,39.650391 C 848.09895,39.499356 847.74218,39.423835 847.24219,39.423828 C 846.78385,39.423835 846.43229,39.514981 846.1875,39.697266 C 845.94271,39.879564 845.82031,40.13998 845.82031,40.478516 L 845.82031,40.603516 L 843.69531,40.603516 L 843.69531,40.447266 C 843.69531,39.577481 844.0026,38.89519 844.61719,38.400391 C 845.23177,37.900399 846.08073,37.650399 847.16406,37.650391 C 848.35156,37.650399 849.26041,37.856128 849.89063,38.267578 C 850.52603,38.679044 850.84374,39.272794 850.84375,40.048828 L 850.84375,44.876953 C 850.84374,45.231121 850.8802,45.496746 850.95313,45.673828 C 851.02603,45.845704 851.14843,45.975912 851.32031,46.064453 L 851.32031,46.447266 L 848.95313,46.447266 C 848.87499,46.301432 848.8151,46.139974 848.77344,45.962891 C 848.73176,45.785808 848.70833,45.595704 848.70313,45.392578 M 848.66406,42.267578 C 848.29427,42.439457 847.86718,42.577478 847.38281,42.681641 C 846.90364,42.785811 846.65625,42.840498 846.64063,42.845703 C 846.23958,42.96029 845.95833,43.103519 845.79688,43.275391 C 845.64062,43.447269 845.5625,43.684248 845.5625,43.986328 C 845.5625,44.29883 845.66406,44.54883 845.86719,44.736328 C 846.07031,44.918621 846.34375,45.009767 846.6875,45.009766 C 847.30208,45.009767 847.78385,44.837892 848.13281,44.494141 C 848.48697,44.145185 848.66406,43.671227 848.66406,43.072266 L 848.66406,42.267578 M 857.96875,43.244141 L 860.21094,43.244141 C 860.11718,44.322268 859.72395,45.173829 859.03125,45.798828 C 858.33854,46.423828 857.44791,46.736328 856.35938,46.736328 C 855.125,46.736328 854.15625,46.335287 853.45313,45.533203 C 852.75521,44.725913 852.40625,43.611331 852.40625,42.189453 C 852.40625,40.772792 852.76302,39.663418 853.47656,38.861328 C 854.19531,38.054045 855.18229,37.650399 856.4375,37.650391 C 857.53645,37.650399 858.41666,37.942066 859.07813,38.525391 C 859.74478,39.108731 860.11718,39.92123 860.19531,40.962891 L 857.9375,40.962891 C 857.87499,40.509772 857.71614,40.163418 857.46094,39.923828 C 857.20572,39.684252 856.86979,39.56446 856.45313,39.564453 C 855.89062,39.56446 855.46875,39.785814 855.1875,40.228516 C 854.91146,40.67123 854.77343,41.335292 854.77344,42.220703 C 854.77343,43.038415 854.91666,43.668623 855.20313,44.111328 C 855.49479,44.54883 855.91145,44.76758 856.45313,44.767578 C 856.87499,44.76758 857.21354,44.639976 857.46875,44.384766 C 857.72395,44.12956 857.89062,43.749352 857.96875,43.244141 M 866.88281,43.869141 L 869.14844,43.869141 C 868.91926,44.764976 868.45572,45.4681 867.75781,45.978516 C 867.0651,46.483724 866.21874,46.736328 865.21875,46.736328 C 863.98958,46.736328 863.01562,46.32487 862.29688,45.501953 C 861.57812,44.67383 861.21875,43.554039 861.21875,42.142578 C 861.21875,40.751959 861.57292,39.655606 862.28125,38.853516 C 862.98958,38.051441 863.95833,37.650399 865.1875,37.650391 C 866.48958,37.650399 867.49478,38.046232 868.20313,38.837891 C 868.91145,39.624356 869.26562,40.74675 869.26563,42.205078 C 869.26562,42.366541 869.26301,42.488936 869.25781,42.572266 C 869.2578,42.650394 869.2526,42.725915 869.24219,42.798828 L 863.57031,42.798828 C 863.60156,43.465498 863.76302,43.968101 864.05469,44.306641 C 864.35156,44.645184 864.77604,44.814455 865.32813,44.814453 C 865.71874,44.814455 866.03906,44.738934 866.28906,44.587891 C 866.53906,44.431643 866.73697,44.19206 866.88281,43.869141 M 863.57031,41.306641 L 866.91406,41.306641 C 866.89322,40.73373 866.73958,40.298834 866.45313,40.001953 C 866.17187,39.699877 865.76562,39.548835 865.23438,39.548828 C 864.73958,39.548835 864.34895,39.699877 864.0625,40.001953 C 863.78125,40.304043 863.61718,40.738938 863.57031,41.306641"
+       id="text5207" />
+    <path
+       style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1"
+       d="M 840,17.646484 L 797.02608,17.646484"
+       id="path5439" />
+    <path
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 802.5,25.146484 L 802.5,10.146484 L 787.5,17.646484 L 802.5,25.146484 z "
+       id="path5441" />
+    <g
+       id="g5459"
+       transform="translate(0,7.5)">
+      <path
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 82.50003,75 L 54.020182,75"
+         id="path5453" />
+      <path
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z "
+         id="path5455" />
+      <path
+         id="path5457"
+         d="M 45,67.5 C 45,82.5 45,82.5 45,82.5"
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+    </g>
+    <g
+       id="g5464"
+       transform="matrix(-1,9.581637e-17,-9.581637e-17,-1,127.5,172.5)">
+      <path
+         id="path5466"
+         d="M 82.50003,75 L 54.020182,75"
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+      <path
+         id="path5468"
+         d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z "
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+      <path
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 45,67.5 C 45,82.5 45,82.5 45,82.5"
+         id="path5470" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 107.0625,80.560547 L 105.23438,78.779297 L 107.17969,76.763672 L 109.05469,78.591797 C 109.30467,78.123052 109.49608,77.587897 109.62891,76.986328 C 109.7617,76.384773 109.82811,75.728524 109.82813,75.017578 C 109.82811,73.119151 109.40233,71.646496 108.55078,70.599609 C 107.69921,69.544936 106.5078,69.017593 104.97656,69.017578 C 103.46093,69.017593 102.28124,69.54103 101.4375,70.587891 C 100.59374,71.634778 100.17187,73.111339 100.17188,75.017578 C 100.17187,76.916022 100.59374,78.392583 101.4375,79.447266 C 102.28124,80.494144 103.46093,81.017581 104.97656,81.017578 C 105.36718,81.017581 105.73436,80.978518 106.07813,80.900391 C 106.42968,80.822268 106.7578,80.708987 107.0625,80.560547 M 109.55859,82.916016 C 108.97264,83.306641 108.28905,83.603516 107.50781,83.806641 C 106.73436,84.009765 105.89061,84.111328 104.97656,84.111328 C 102.39843,84.111328 100.34765,83.291016 98.824219,81.650391 C 97.308592,80.009769 96.55078,77.798834 96.550781,75.017578 C 96.55078,72.228527 97.308592,70.017592 98.824219,68.384766 C 100.34765,66.744158 102.39843,65.923846 104.97656,65.923828 C 107.55468,65.923846 109.60545,66.744158 111.12891,68.384766 C 112.66014,70.025404 113.42576,72.23634 113.42578,75.017578 C 113.42576,76.236336 113.26951,77.353522 112.95703,78.369141 C 112.64451,79.376957 112.18358,80.259769 111.57422,81.017578 L 113.44922,82.810547 L 111.52734,84.826172 L 109.55859,82.916016"
+       id="text5474" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 158.94141,83.630859 L 153.99609,66.369141 L 157.67578,66.369141 L 160.62891,78.544922 L 163.125,66.369141 L 166.91016,66.369141 L 169.40625,78.544922 L 172.35938,66.369141 L 176.00391,66.369141 L 171.07031,83.630859 L 167.68359,83.630859 L 165.01172,70.412109 L 162.32813,83.630859 L 158.94141,83.630859"
+       id="text5482" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 218.52539,83.630859 L 218.52539,66.369141 L 231.05273,66.369141 L 231.05273,69.369141 L 222.0293,69.369141 L 222.0293,73.048828 L 230.2793,73.048828 L 230.2793,76.001953 L 222.0293,76.001953 L 222.0293,80.443359 L 231.47461,80.443359 L 231.47461,83.630859 L 218.52539,83.630859"
+       id="text5492" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 281.4375,73.916016 L 285.60938,73.916016 C 286.51561,73.916025 287.17968,73.732432 287.60156,73.365234 C 288.03124,72.998058 288.24608,72.419933 288.24609,71.630859 C 288.24608,70.880872 288.03905,70.314466 287.625,69.931641 C 287.21093,69.54103 286.59374,69.345717 285.77344,69.345703 L 281.4375,69.345703 L 281.4375,73.916016 M 277.88672,83.630859 L 277.88672,66.369141 L 286.25391,66.369141 C 288.13671,66.369158 289.53124,66.771501 290.4375,67.576172 C 291.34373,68.380875 291.79686,69.611342 291.79688,71.267578 C 291.79686,72.322277 291.5742,73.201182 291.12891,73.904297 C 290.69139,74.607431 290.05858,75.087899 289.23047,75.345703 C 289.98045,75.611336 290.5117,76.017586 290.82422,76.564453 C 291.14452,77.111335 291.32811,77.962896 291.375,79.119141 L 291.44531,81.158203 C 291.4453,81.173831 291.4453,81.197268 291.44531,81.228516 C 291.46873,82.259767 291.69139,82.884766 292.11328,83.103516 L 292.11328,83.630859 L 288.22266,83.630859 C 288.09764,83.388672 287.99999,83.091797 287.92969,82.740234 C 287.86718,82.380861 287.82811,81.95508 287.8125,81.462891 L 287.76563,79.646484 C 287.72655,78.576177 287.52343,77.853521 287.15625,77.478516 C 286.79686,77.103522 286.14452,76.916022 285.19922,76.916016 L 281.4375,76.916016 L 281.4375,83.630859 L 277.88672,83.630859"
+       id="text5500" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 343.24219,83.630859 L 343.24219,69.451172 L 338.12109,69.451172 L 338.12109,66.369141 L 351.87891,66.369141 L 351.87891,69.451172 L 346.79297,69.451172 L 346.79297,83.630859 L 343.24219,83.630859"
+       id="text5504" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 407.06836,83.630859 L 403.51758,83.630859 L 403.51758,77.197266 L 397.24805,66.369141 L 401.5957,66.369141 L 405.28711,73.810547 L 408.69727,66.369141 L 412.75195,66.369141 L 407.06836,77.197266 L 407.06836,83.630859"
+       id="text5518" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 458.08594,66.105469 L 461.67188,66.105469 L 461.67188,76.933594 C 461.67187,78.269536 461.93749,79.246098 462.46875,79.863281 C 462.99999,80.472659 463.84374,80.777346 465,80.777344 C 466.17187,80.777346 467.02343,80.472659 467.55469,79.863281 C 468.09374,79.25391 468.36327,78.277349 468.36328,76.933594 L 468.36328,66.105469 L 471.91406,66.105469 L 471.91406,77.320313 C 471.91405,79.437504 471.3203,81.062502 470.13281,82.195313 C 468.95311,83.328125 467.24999,83.894531 465.02344,83.894531 C 462.78124,83.894531 461.0625,83.332031 459.86719,82.207031 C 458.67969,81.074221 458.08594,79.445316 458.08594,77.320313 L 458.08594,66.105469"
+       id="text5522" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 523.22461,83.630859 L 523.22461,66.369141 L 526.77539,66.369141 L 526.77539,83.630859 L 523.22461,83.630859"
+       id="text5526" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 580.18359,75 C 580.18359,76.898444 580.60546,78.375005 581.44922,79.429688 C 582.29296,80.476566 583.47265,81.000003 584.98828,81 C 586.51952,81.000003 587.71093,80.476566 588.5625,79.429688 C 589.41405,78.375005 589.83983,76.898444 589.83984,75 C 589.83983,73.101573 589.41405,71.628918 588.5625,70.582031 C 587.71093,69.527358 586.51952,69.000015 584.98828,69 C 583.47265,69.000015 582.29296,69.523452 581.44922,70.570313 C 580.60546,71.617199 580.18359,73.093761 580.18359,75 M 576.5625,75 C 576.5625,72.210949 577.32031,70.000014 578.83594,68.367188 C 580.35937,66.726579 582.41015,65.906268 584.98828,65.90625 C 587.56639,65.906268 589.61717,66.726579 591.14063,68.367188 C 592.67186,70.007826 593.43748,72.218761 593.4375,75 C 593.43748,77.781256 592.67186,79.992191 591.14063,81.632813 C 589.61717,83.273438 587.56639,84.09375 584.98828,84.09375 C 582.41015,84.09375 580.35937,83.273438 578.83594,81.632813 C 577.32031,79.992191 576.5625,77.781256 576.5625,75"
+       id="text5530" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 641.97656,74.361328 L 645.41016,74.361328 C 646.33983,74.361337 647.01561,74.166025 647.4375,73.775391 C 647.85936,73.376963 648.0703,72.740245 648.07031,71.865234 C 648.0703,71.044934 647.86327,70.423841 647.44922,70.001953 C 647.03515,69.580092 646.41796,69.369155 645.59766,69.369141 L 641.97656,69.369141 L 641.97656,74.361328 M 641.95313,77.490234 L 641.95313,83.630859 L 638.40234,83.630859 L 638.40234,66.369141 L 646.07813,66.369141 C 647.89061,66.369158 649.26171,66.841814 650.19141,67.787109 C 651.12889,68.724624 651.59764,70.103529 651.59766,71.923828 C 651.59764,73.705088 651.14061,75.080087 650.22656,76.048828 C 649.31249,77.009772 648.0078,77.490241 646.3125,77.490234 L 641.95313,77.490234"
+       id="text5534" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 709.24805,63.919922 L 709.24805,66.369141 C 709.17772,66.369155 709.08007,66.365249 708.95508,66.357422 C 708.83007,66.349624 708.74413,66.345718 708.69727,66.345703 C 707.90819,66.345718 707.37304,66.498062 707.0918,66.802734 C 706.81835,67.099624 706.68163,67.732435 706.68164,68.701172 L 706.68164,71.513672 C 706.68163,72.66993 706.50585,73.490242 706.1543,73.974609 C 705.80273,74.458991 705.16992,74.806647 704.25586,75.017578 C 705.16992,75.228522 705.80273,75.572271 706.1543,76.048828 C 706.50585,76.525395 706.68163,77.341801 706.68164,78.498047 L 706.68164,81.322266 C 706.68163,82.283202 706.81835,82.912108 707.0918,83.208984 C 707.36523,83.505857 707.90038,83.654294 708.69727,83.654297 C 708.74413,83.654294 708.83007,83.650388 708.95508,83.642578 C 709.08007,83.634763 709.17772,83.630857 709.24805,83.630859 L 709.24805,86.080078 C 709.13866,86.080073 708.98632,86.08398 708.79102,86.091797 C 708.59569,86.099605 708.45116,86.103511 708.35742,86.103516 C 707.57616,86.103511 706.92382,86.056636 706.40039,85.962891 C 705.87695,85.869136 705.43163,85.724605 705.06445,85.529297 C 704.61913,85.263668 704.30273,84.904293 704.11523,84.451172 C 703.93554,84.005857 703.8457,83.228514 703.8457,82.119141 L 703.8457,79.166016 C 703.8457,78.095706 703.64648,77.337895 703.24805,76.892578 C 702.84961,76.439458 702.17773,76.212896 701.23242,76.212891 C 701.18554,76.212896 701.10742,76.216802 700.99805,76.224609 C 700.88867,76.232427 700.80664,76.236333 700.75195,76.236328 L 700.75195,73.787109 C 700.80664,73.787117 700.88867,73.791023 700.99805,73.798828 C 701.10742,73.806648 701.18554,73.810554 701.23242,73.810547 C 702.16992,73.810554 702.83789,73.583992 703.23633,73.130859 C 703.64257,72.677743 703.8457,71.912119 703.8457,70.833984 L 703.8457,67.904297 C 703.8457,66.787124 703.93554,66.001968 704.11523,65.548828 C 704.30273,65.095719 704.61913,64.736345 705.06445,64.470703 C 705.43163,64.275408 705.87695,64.130876 706.40039,64.037109 C 706.92382,63.943377 707.57616,63.896502 708.35742,63.896484 C 708.45116,63.896502 708.59569,63.900408 708.79102,63.908203 C 708.98632,63.916033 709.13866,63.919939 709.24805,63.919922 M 703.0957,93.966797 L 709.01367,93.966797 L 709.01367,96.462891 L 706.25977,96.462891 L 706.25977,113.8418 L 709.01367,113.8418 L 709.01367,116.33789 L 703.0957,116.33789 L 703.0957,93.966797"
+       id="text5546" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 760.75195,63.908203 L 761.54883,63.908203 C 762.4082,63.90822 763.09961,63.955095 763.62305,64.048828 C 764.14648,64.142595 764.58398,64.291033 764.93555,64.494141 C 765.38085,64.744157 765.69335,65.103532 765.87305,65.572266 C 766.06054,66.033218 766.15429,66.806655 766.1543,67.892578 L 766.1543,70.845703 C 766.15429,71.916025 766.35351,72.677743 766.75195,73.130859 C 767.15038,73.57618 767.82226,73.798836 768.76758,73.798828 C 768.81444,73.798836 768.89257,73.794929 769.00195,73.787109 C 769.11132,73.779304 769.19335,73.775398 769.24805,73.775391 L 769.24805,76.224609 L 768.81445,76.224609 C 767.83788,76.224614 767.15038,76.443364 766.75195,76.880859 C 766.35351,77.318363 766.15429,78.076175 766.1543,79.154297 L 766.1543,82.107422 C 766.15429,83.224607 766.06054,84.009763 765.87305,84.462891 C 765.69335,84.916012 765.38085,85.267574 764.93555,85.517578 C 764.56835,85.712886 764.12304,85.857417 763.59961,85.951172 C 763.07617,86.044917 762.42382,86.091792 761.64258,86.091797 C 761.54883,86.091792 761.40429,86.087886 761.20898,86.080078 C 761.01367,86.072261 760.86133,86.068355 760.75195,86.068359 L 760.75195,83.619141 C 760.82226,83.619138 760.91992,83.623044 761.04492,83.630859 C 761.16992,83.638669 761.25586,83.642576 761.30273,83.642578 C 762.09179,83.642576 762.62304,83.490232 762.89648,83.185547 C 763.17773,82.88867 763.31836,82.263671 763.31836,81.310547 L 763.31836,78.509766 C 763.31836,77.337895 763.49414,76.513677 763.8457,76.037109 C 764.19726,75.55274 764.83007,75.20899 765.74414,75.005859 C 764.83007,74.794928 764.19726,74.447272 763.8457,73.962891 C 763.49414,73.478523 763.31836,72.658212 763.31836,71.501953 L 763.31836,68.666016 C 763.31836,67.712904 763.17773,67.087905 762.89648,66.791016 C 762.62304,66.486343 762.09179,66.333999 761.30273,66.333984 C 761.25586,66.333999 761.16992,66.337906 761.04492,66.345703 C 760.91992,66.35353 760.82226,66.357437 760.75195,66.357422 L 760.75195,63.908203 M 767.00977,93.955078 L 767.00977,116.32617 L 761.08008,116.32617 L 761.08008,113.83008 L 763.8457,113.83008 L 763.8457,96.451172 L 761.08008,96.451172 L 761.08008,93.955078 L 767.00977,93.955078"
+       id="text5554" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 823.79883,62.977287 L 826.21289,62.977287 L 826.21289,86.977287 L 823.79883,86.977287 L 823.79883,62.977287 M 827.10352,113.54369 L 821.29102,93.6101 L 822.87305,93.6101 L 828.70898,113.54369 L 827.10352,113.54369"
+       id="text5564" />
+    <g
+       id="g3597">
+      <path
+         id="text5570"
+         d="M 22.996094,139.10156 C 22.907541,140.40886 22.403635,141.44792 21.484375,142.21875 C 20.565095,142.98958 19.365878,143.375 17.886719,143.375 C 16.183589,143.375 14.859372,142.84375 13.914063,141.78125 C 12.968749,140.71875 12.496093,139.22917 12.496094,137.3125 C 12.496093,135.35417 12.977863,133.85418 13.941406,132.8125 C 14.904945,131.77084 16.29036,131.25001 18.097656,131.25 C 19.566398,131.25001 20.726554,131.60808 21.578125,132.32422 C 22.429677,133.04037 22.897124,134.05209 22.980469,135.35938 L 20.644531,135.35938 C 20.545564,134.70834 20.279939,134.21225 19.847656,133.87109 C 19.415357,133.52996 18.832024,133.35938 18.097656,133.35938 C 17.055984,133.35938 16.264318,133.69532 15.722656,134.36719 C 15.180986,135.03907 14.910153,136.02084 14.910156,137.3125 C 14.910153,138.5625 15.179684,139.52865 15.71875,140.21094 C 16.257808,140.89323 17.024734,141.23438 18.019531,141.23438 C 18.738274,141.23438 19.326815,141.05078 19.785156,140.68359 C 20.243481,140.31641 20.540356,139.78907 20.675781,139.10156 L 22.996094,139.10156 z M 29.558594,142 C 29.27213,142.44271 28.89713,142.77995 28.433594,143.01172 C 27.970048,143.24349 27.430986,143.35937 26.816406,143.35938 C 25.993487,143.35937 25.359373,143.125 24.914063,142.65625 C 24.468749,142.1875 24.246093,141.52083 24.246094,140.65625 C 24.246093,139.85417 24.468749,139.24219 24.914063,138.82031 C 25.359373,138.39844 26.09505,138.10938 27.121094,137.95313 C 27.355465,137.91667 27.662756,137.87501 28.042969,137.82813 C 29.006505,137.70313 29.488275,137.42448 29.488281,136.99219 C 29.488275,136.64844 29.381505,136.40235 29.167969,136.25391 C 28.954422,136.10548 28.597651,136.03126 28.097656,136.03125 C 27.639319,136.03126 27.287757,136.1224 27.042969,136.30469 C 26.798174,136.48699 26.675778,136.7474 26.675781,137.08594 L 26.675781,137.21094 L 24.550781,137.21094 L 24.550781,137.05469 C 24.55078,136.1849 24.858072,135.50131 25.472656,135.00391 C 26.087237,134.50652 26.936195,134.25782 28.019531,134.25781 C 29.207026,134.25782 30.117181,134.46355 30.75,134.875 C 31.382805,135.28647 31.699211,135.88022 31.699219,136.65625 L 31.699219,141.48438 C 31.699211,141.83854 31.735669,142.10287 31.808594,142.27734 C 31.881502,142.45182 32.003898,142.58333 32.175781,142.67188 L 32.175781,143.05469 L 29.808594,143.05469 C 29.730463,142.90885 29.670567,142.7474 29.628906,142.57031 C 29.587234,142.39323 29.563796,142.20313 29.558594,142 L 29.558594,142 z M 29.519531,138.875 C 29.149734,139.04688 28.723953,139.1849 28.242188,139.28906 C 27.760413,139.39323 27.511715,139.44792 27.496094,139.45313 C 27.095049,139.56771 26.815101,139.71094 26.65625,139.88281 C 26.497393,140.05469 26.417966,140.29167 26.417969,140.59375 C 26.417966,140.90625 26.519528,141.15495 26.722656,141.33984 C 26.925778,141.52474 27.199215,141.61719 27.542969,141.61719 C 28.157548,141.61719 28.64062,141.44401 28.992188,141.09766 C 29.343744,140.7513 29.519525,140.27865 29.519531,139.67969 L 29.519531,138.875 z M 39.691406,138.85938 C 39.691399,138.00521 39.529941,137.35287 39.207031,136.90234 C 38.884108,136.45183 38.415359,136.22657 37.800781,136.22656 C 37.19661,136.22657 36.736975,136.45053 36.421875,136.89844 C 36.106767,137.34636 35.949216,138.00001 35.949219,138.85938 C 35.949216,139.66146 36.11458,140.28125 36.445313,140.71875 C 36.776038,141.15625 37.243485,141.375 37.847656,141.375 C 38.420567,141.375 38.871088,141.15104 39.199219,140.70313 C 39.527337,140.25521 39.691399,139.64063 39.691406,138.85938 L 39.691406,138.85938 z M 33.738281,146.46094 L 33.738281,134.5625 L 35.902344,134.5625 L 35.902344,135.71094 C 36.230465,135.21095 36.59635,134.84636 37,134.61719 C 37.403641,134.38803 37.878901,134.27345 38.425781,134.27344 C 39.472649,134.27345 40.321607,134.68621 40.972656,135.51172 C 41.623689,136.33725 41.94921,137.42188 41.949219,138.76563 C 41.94921,140.125 41.623689,141.22787 40.972656,142.07422 C 40.321607,142.92057 39.483066,143.34375 38.457031,143.34375 C 37.915359,143.34375 37.432287,143.22917 37.007813,143 C 36.583329,142.77083 36.230465,142.4375 35.949219,142 L 35.949219,146.46094 L 33.738281,146.46094 z M 43.027344,140.28906 L 45.292969,140.28906 C 45.313799,140.72136 45.470049,141.04297 45.761719,141.25391 C 46.053382,141.46485 46.490881,141.57031 47.074219,141.57031 C 47.516922,141.57031 47.85937,141.4961 48.101563,141.34766 C 48.343744,141.19922 48.464838,140.98959 48.464844,140.71875 C 48.464838,140.33334 48.011713,140.04427 47.105469,139.85156 C 46.735673,139.77344 46.441402,139.70573 46.222656,139.64844 C 45.118487,139.36719 44.351561,139.03386 43.921875,138.64844 C 43.492187,138.26303 43.277343,137.74219 43.277344,137.08594 C 43.277343,136.21615 43.591145,135.52735 44.21875,135.01953 C 44.846352,134.51173 45.696611,134.25782 46.769531,134.25781 C 47.904943,134.25782 48.796869,134.51043 49.445313,135.01563 C 50.093742,135.52084 50.438794,136.23178 50.480469,137.14844 L 48.269531,137.14844 C 48.253901,136.78907 48.117182,136.51042 47.859375,136.3125 C 47.601557,136.11459 47.243485,136.01563 46.785156,136.01563 C 46.352861,136.01563 46.031246,136.08074 45.820313,136.21094 C 45.609372,136.34115 45.503903,136.53646 45.503906,136.79688 C 45.503903,137.13542 46.069007,137.4349 47.199219,137.69531 C 47.45963,137.75261 47.665359,137.79948 47.816406,137.83594 C 48.946608,138.10157 49.718743,138.42188 50.132813,138.79688 C 50.546867,139.17188 50.753898,139.70052 50.753906,140.38281 C 50.753898,141.34636 50.414055,142.08073 49.734375,142.58594 C 49.054681,143.09115 48.066401,143.34375 46.769531,143.34375 C 45.597653,143.34375 44.680987,143.08073 44.019531,142.55469 C 43.358072,142.02865 43.027343,141.30469 43.027344,140.38281 L 43.027344,140.28906 z M 57.011719,143.05469 L 57.011719,131.54688 L 59.378906,131.54688 L 59.378906,140.92969 L 64.996094,140.92969 L 64.996094,143.05469 L 57.011719,143.05469 z M 67.972656,138.79688 C 67.972653,139.64063 68.14583,140.29167 68.492188,140.75 C 68.838538,141.20834 69.332027,141.4375 69.972656,141.4375 C 70.602859,141.4375 71.09114,141.20834 71.4375,140.75 C 71.783847,140.29167 71.957024,139.64063 71.957031,138.79688 C 71.957024,137.95834 71.78515,137.3112 71.441406,136.85547 C 71.09765,136.39975 70.608067,136.17188 69.972656,136.17188 C 69.332027,136.17188 68.838538,136.39975 68.492188,136.85547 C 68.14583,137.3112 67.972653,137.95834 67.972656,138.79688 L 67.972656,138.79688 z M 65.667969,138.79688 C 65.667968,137.38542 66.05078,136.27605 66.816406,135.46875 C 67.582029,134.66147 68.634111,134.25782 69.972656,134.25781 C 71.305983,134.25782 72.356764,134.66147 73.125,135.46875 C 73.89322,136.27605 74.277335,137.38542 74.277344,138.79688 C 74.277335,140.21354 73.89322,141.32552 73.125,142.13281 C 72.356764,142.9401 71.305983,143.34375 69.972656,143.34375 C 68.634111,143.34375 67.582029,142.9401 66.816406,142.13281 C 66.05078,141.32552 65.667968,140.21354 65.667969,138.79688 L 65.667969,138.79688 z M 80.949219,139.85156 L 83.191406,139.85156 C 83.097648,140.92969 82.704419,141.78125 82.011719,142.40625 C 81.319004,143.03125 80.42838,143.34375 79.339844,143.34375 C 78.105465,143.34375 77.138019,142.94141 76.4375,142.13672 C 75.736978,141.33203 75.386718,140.21875 75.386719,138.79688 C 75.386718,137.38021 75.744791,136.26954 76.460938,135.46484 C 77.177081,134.66016 78.162757,134.25782 79.417969,134.25781 C 80.516921,134.25782 81.398431,134.54949 82.0625,135.13281 C 82.726555,135.71615 83.097648,136.52865 83.175781,137.57031 L 80.917969,137.57031 C 80.855463,137.11719 80.696609,136.77084 80.441406,136.53125 C 80.186193,136.29167 79.850255,136.17188 79.433594,136.17188 C 78.87109,136.17188 78.450517,136.39324 78.171875,136.83594 C 77.893226,137.27865 77.753903,137.94271 77.753906,138.82813 C 77.753903,139.64584 77.898434,140.27474 78.1875,140.71484 C 78.476559,141.15495 78.891923,141.375 79.433594,141.375 C 79.855464,141.375 80.194005,141.2474 80.449219,140.99219 C 80.704421,140.73698 80.871088,140.35677 80.949219,139.85156 L 80.949219,139.85156 z M 84.675781,143.05469 L 84.675781,131.54688 L 86.886719,131.54688 L 86.886719,137.58594 L 89.589844,134.5625 L 92.324219,134.5625 L 89.363281,137.71094 L 92.503906,143.05469 L 89.777344,143.05469 L 87.746094,139.4375 L 86.886719,140.36719 L 86.886719,143.05469 L 84.675781,143.05469 z "
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" />
+      <path
+         id="path5584"
+         d="M 23.746094,146.25 L 12.496094,161.25 L 19.996094,161.25 L 19.996094,168.75 L 27.496094,168.75 L 27.496094,161.25 L 34.996094,161.25 L 23.746094,146.25 z M 22.714844,150.46875 L 24.746094,150.46875 L 27.871094,159.09375 L 25.996094,159.09375 L 25.402344,157.3125 L 22.058594,157.3125 L 21.496094,159.09375 L 19.621094,159.09375 L 22.714844,150.46875 z M 23.746094,152.1875 L 22.527344,155.84375 L 24.933594,155.84375 L 23.746094,152.1875 z "
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 119.9707,129.82617 L 117.58008,137.17383 L 122.37305,137.17383 L 119.9707,129.82617 M 117.9082,126.36914 L 122.00977,126.36914 L 128.23242,143.63086 L 124.50586,143.63086 L 123.33398,140.08008 L 116.64258,140.08008 L 115.50586,143.63086 L 111.76758,143.63086 L 117.9082,126.36914"
+       id="text5641" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 172.98047,138.29297 L 176.48438,138.29297 C 176.61718,139.23829 177.0039,139.94141 177.64453,140.40234 C 178.28515,140.85547 179.21093,141.08203 180.42188,141.08203 C 181.45312,141.08203 182.23046,140.89844 182.75391,140.53125 C 183.27733,140.16407 183.53905,139.6211 183.53906,138.90234 C 183.53905,137.85547 182.03515,136.98829 179.02734,136.30078 C 178.98827,136.29298 178.95312,136.28516 178.92188,136.27734 C 178.84374,136.26173 178.72265,136.23438 178.55859,136.19531 C 176.94921,135.84376 175.80078,135.44923 175.11328,135.01172 C 174.5039,134.6211 174.03906,134.09767 173.71875,133.44141 C 173.39844,132.77735 173.23828,131.99611 173.23828,131.09766 C 173.23828,129.41798 173.80859,128.13283 174.94922,127.24219 C 176.08984,126.34377 177.73828,125.89455 179.89453,125.89453 C 181.91015,125.89455 183.48436,126.37111 184.61719,127.32422 C 185.7578,128.27736 186.35936,129.62111 186.42188,131.35547 L 183.01172,131.35547 C 182.94921,130.51954 182.6289,129.88283 182.05078,129.44531 C 181.47265,129.00783 180.64843,128.78908 179.57813,128.78906 C 178.64843,128.78908 177.92968,128.97267 177.42188,129.33984 C 176.92187,129.69923 176.67187,130.21486 176.67188,130.88672 C 176.67187,131.80079 177.65234,132.48439 179.61328,132.9375 C 180.14452,133.06251 180.55859,133.16017 180.85547,133.23047 C 182.11327,133.55079 183.0039,133.80079 183.52734,133.98047 C 184.05858,134.16017 184.51952,134.35938 184.91016,134.57813 C 185.61327,134.96876 186.14061,135.48829 186.49219,136.13672 C 186.84374,136.77735 187.01952,137.54688 187.01953,138.44531 C 187.01952,140.24219 186.41405,141.63672 185.20313,142.62891 C 183.99218,143.61328 182.28515,144.10547 180.08203,144.10547 C 177.91015,144.10547 176.20703,143.60156 174.97266,142.59375 C 173.73828,141.58594 173.07422,140.15235 172.98047,138.29297"
+       id="text5645" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 236.16211,140.51367 L 239.00977,140.51367 C 240.65819,140.51367 241.8496,140.08399 242.58398,139.22461 C 243.32616,138.35743 243.69725,136.95508 243.69727,135.01758 C 243.69725,133.0879 243.3535,131.66993 242.66602,130.76367 C 241.9785,129.85744 240.90429,129.40431 239.44336,129.4043 L 236.16211,129.4043 L 236.16211,140.51367 M 232.68164,143.63086 L 232.68164,126.36914 L 239.44336,126.36914 C 242.09179,126.36916 244.06444,127.084 245.36133,128.51367 C 246.666,129.94337 247.31834,132.11134 247.31836,135.01758 C 247.31834,136.59571 247.07616,137.98633 246.5918,139.18945 C 246.11522,140.39258 245.41991,141.36133 244.50586,142.0957 C 243.81835,142.64258 243.0371,143.03711 242.16211,143.2793 C 241.2871,143.51367 240.06054,143.63086 238.48242,143.63086 L 232.68164,143.63086"
+       id="text5649" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 293.97656,143.63086 L 293.97656,126.36914 L 306.02344,126.36914 L 306.02344,129.36914 L 297.48047,129.36914 L 297.48047,133.2832 L 304.96875,133.2832 L 304.96875,136.2832 L 297.48047,136.2832 L 297.48047,143.63086 L 293.97656,143.63086"
+       id="text5653" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 365.17969,141.57422 C 364.53905,142.44141 363.80858,143.07813 362.98828,143.48438 C 362.17577,143.89062 361.21874,144.09375 360.11719,144.09375 C 357.70312,144.09375 355.74609,143.25781 354.24609,141.58594 C 352.7539,139.90625 352.00781,137.70313 352.00781,134.97656 C 352.00781,132.22657 352.7539,130.02736 354.24609,128.37891 C 355.73828,126.73049 357.72656,125.90627 360.21094,125.90625 C 362.37499,125.90627 364.14061,126.4258 365.50781,127.46484 C 366.87498,128.49611 367.68748,129.91798 367.94531,131.73047 L 364.32422,131.73047 C 364.10546,130.83204 363.65624,130.14845 362.97656,129.67969 C 362.30468,129.21095 361.42577,128.97658 360.33984,128.97656 C 358.89452,128.97658 357.75781,129.50783 356.92969,130.57031 C 356.10937,131.62501 355.69921,133.08595 355.69922,134.95313 C 355.69921,136.82813 356.1289,138.29688 356.98828,139.35938 C 357.84765,140.42188 359.02734,140.95313 360.52734,140.95313 C 361.65233,140.95313 362.59374,140.6211 363.35156,139.95703 C 364.10936,139.29297 364.57811,138.38282 364.75781,137.22656 L 360.84375,137.22656 L 360.84375,134.27344 L 367.99219,134.27344 L 367.99219,143.61328 L 365.61328,143.61328 L 365.17969,141.57422"
+       id="text5657" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 412.86328,143.63086 L 412.86328,126.36914 L 416.4375,126.36914 L 416.4375,132.80273 L 423.5625,132.80273 L 423.5625,126.36914 L 427.13672,126.36914 L 427.13672,143.63086 L 423.5625,143.63086 L 423.5625,135.97852 L 416.4375,135.97852 L 416.4375,143.63086 L 412.86328,143.63086"
+       id="text5661" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 474.48047,136.95703 L 477.91406,136.95703 L 477.91406,139.04297 C 477.91406,139.64453 478.09375,140.10547 478.45313,140.42578 C 478.8125,140.73828 479.32812,140.89453 480,140.89453 C 480.73437,140.89453 481.24609,140.70313 481.53516,140.32031 C 481.82421,139.9375 481.96874,139.21875 481.96875,138.16406 L 481.96875,126.12891 L 485.51953,126.12891 L 485.51953,138.32813 C 485.51952,139.42188 485.45311,140.22657 485.32031,140.74219 C 485.1953,141.25 484.98436,141.69922 484.6875,142.08984 C 484.23436,142.66797 483.61327,143.10938 482.82422,143.41406 C 482.03515,143.71875 481.10937,143.87109 480.04688,143.87109 C 479.07031,143.87109 478.20703,143.73828 477.45703,143.47266 C 476.70703,143.20703 476.08203,142.8125 475.58203,142.28906 C 475.18359,141.86719 474.89844,141.39844 474.72656,140.88281 C 474.5625,140.35938 474.48047,139.5 474.48047,138.30469 L 474.48047,136.95703"
+       id="text5665" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 532.32422,143.63086 L 532.32422,126.36914 L 535.875,126.36914 L 535.875,133.45898 L 542.61328,126.36914 L 547.05469,126.36914 L 540.16406,133.35352 L 547.67578,143.63086 L 543.33984,143.63086 L 537.71484,135.73242 L 535.875,137.56055 L 535.875,143.63086 L 532.32422,143.63086"
+       id="text5669" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 594.01172,143.63086 L 594.01172,126.36914 L 597.5625,126.36914 L 597.5625,140.44336 L 605.98828,140.44336 L 605.98828,143.63086 L 594.01172,143.63086"
+       id="text5673" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 143.15039,203.63086 L 143.15039,200.63086 L 152.53711,189.49805 L 143.33789,189.49805 L 143.33789,186.36914 L 156.84961,186.36914 L 156.84961,189.36914 L 147.43945,200.51367 L 156.63867,200.51367 L 156.63867,203.63086 L 143.15039,203.63086"
+       id="text5679" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 202.37109,203.63086 L 207.79688,194.81836 L 202.37109,186.36914 L 206.47266,186.36914 L 210,192.4043 L 213.50391,186.36914 L 217.62891,186.36914 L 212.20313,194.79492 L 217.62891,203.63086 L 213.52734,203.63086 L 210,197.6543 L 206.47266,203.63086 L 202.37109,203.63086"
+       id="text5683" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 277.875,197.68359 C 277.74217,199.64454 276.98436,201.20313 275.60156,202.35938 C 274.22655,203.51563 272.42968,204.09375 270.21094,204.09375 C 267.65624,204.09375 265.66796,203.29688 264.24609,201.70313 C 262.83203,200.10938 262.125,197.87501 262.125,195 C 262.125,192.06251 262.84765,189.81251 264.29297,188.25 C 265.73828,186.68752 267.8164,185.90627 270.52734,185.90625 C 272.73046,185.90627 274.46874,186.44533 275.74219,187.52344 C 277.02342,188.59377 277.72655,190.10939 277.85156,192.07031 L 274.34766,192.07031 C 274.19921,191.09376 273.80077,190.35158 273.15234,189.84375 C 272.50389,189.32814 271.6289,189.07033 270.52734,189.07031 C 268.96484,189.07033 267.77734,189.57423 266.96484,190.58203 C 266.15234,191.58986 265.74609,193.06251 265.74609,195 C 265.74609,196.87501 266.14843,198.32422 266.95313,199.34766 C 267.76562,200.3711 268.91796,200.88282 270.41016,200.88281 C 271.48827,200.88282 272.37108,200.60938 273.05859,200.0625 C 273.74608,199.50782 274.19139,198.71485 274.39453,197.68359 L 277.875,197.68359"
+       id="text5687" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 328.33594,203.63086 L 322.38281,186.36914 L 326.32031,186.36914 L 329.98828,199.2832 L 333.72656,186.36914 L 337.61719,186.36914 L 331.73438,203.63086 L 328.33594,203.63086"
+       id="text5691" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 386.32031,200.51367 L 390.52734,200.51367 C 391.51952,200.51367 392.24218,200.33399 392.69531,199.97461 C 393.14843,199.61524 393.37499,199.04883 393.375,198.27539 C 393.37499,197.47071 393.15233,196.89258 392.70703,196.54102 C 392.26171,196.18165 391.52733,196.00196 390.50391,196.00195 L 386.32031,196.00195 L 386.32031,200.51367 M 386.32031,193.04883 L 390.375,193.04883 C 391.24999,193.04884 391.89061,192.9004 392.29688,192.60352 C 392.70311,192.29884 392.90624,191.82228 392.90625,191.17383 C 392.90624,190.54103 392.70702,190.084 392.30859,189.80273 C 391.91796,189.51369 391.26561,189.36915 390.35156,189.36914 L 386.32031,189.36914 L 386.32031,193.04883 M 382.92188,203.63086 L 382.92188,186.36914 L 391.05469,186.36914 C 392.8203,186.36916 394.16405,186.74416 395.08594,187.49414 C 396.01561,188.23634 396.48045,189.31837 396.48047,190.74023 C 396.48045,191.61525 396.30858,192.34571 395.96484,192.93164 C 395.62108,193.51759 395.10545,193.97071 394.41797,194.29102 C 395.30858,194.6504 395.97264,195.16993 396.41016,195.84961 C 396.85545,196.52149 397.07811,197.36133 397.07813,198.36914 C 397.07811,200.04883 396.53123,201.34571 395.4375,202.25977 C 394.34374,203.17383 392.79296,203.63086 390.78516,203.63086 L 382.92188,203.63086"
+       id="text5695" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 442.88672,203.63086 L 442.88672,186.36914 L 446.60156,186.36914 L 453.60938,198.22852 L 453.60938,186.36914 L 457.11328,186.36914 L 457.11328,203.63086 L 453.44531,203.63086 L 446.39063,191.77148 L 446.39063,203.63086 L 442.88672,203.63086"
+       id="text5699" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 501.32813,203.63086 L 501.32813,186.36914 L 506.57813,186.36914 L 510.01172,199.50586 L 513.39844,186.36914 L 518.67188,186.36914 L 518.67188,203.63086 L 515.34375,203.63086 L 515.34375,189.70898 L 511.83984,203.63086 L 508.20703,203.63086 L 504.65625,189.70898 L 504.65625,203.63086 L 501.32813,203.63086"
+       id="text5703" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 658.22461,134.6543 L 658.22461,131.10352 L 661.77539,131.10352 L 661.77539,134.6543 L 658.22461,134.6543 M 658.22461,143.63086 L 658.22461,140.10352 L 661.77539,140.10352 L 661.77539,143.63086 L 658.22461,143.63086 M 658.24805,164.6543 L 658.24805,161.10352 L 661.77539,161.10352 L 661.77539,164.6543 L 658.24805,164.6543 M 658.24805,177.68555 L 658.24805,176.31445 C 658.90429,176.12695 659.38867,175.83789 659.70117,175.44727 C 660.01367,175.05664 660.16992,174.54883 660.16992,173.92383 L 660.16992,173.63086 L 658.22461,173.63086 L 658.22461,170.10352 L 661.77539,170.10352 L 661.77539,173.49023 C 661.77539,174.66211 661.47851,175.59961 660.88477,176.30273 C 660.29101,177.01367 659.41211,177.47461 658.24805,177.68555"
+       id="text5725" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 720.78516,126.7793 L 723.03516,126.7793 L 723.03516,133.33008 L 720.78516,133.33008 L 720.78516,126.7793 M 716.96484,126.7793 L 719.21484,126.7793 L 719.21484,133.33008 L 716.96484,133.33008 L 716.96484,126.7793 M 718.88672,156.7793 L 721.13672,156.7793 L 721.13672,163.33008 L 718.88672,163.33008 L 718.88672,156.7793"
+       id="text5731" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 772.5,140.60938 L 772.5,129.10156 L 780.85156,129.10156 L 780.85156,131.10156 L 774.83594,131.10156 L 774.83594,133.55469 L 780.33594,133.55469 L 780.33594,135.52344 L 774.83594,135.52344 L 774.83594,138.48438 L 781.13281,138.48438 L 781.13281,140.60938 L 772.5,140.60938 M 782.74219,140.60938 L 782.74219,132.11719 L 784.96875,132.11719 L 784.96875,133.125 C 785.28645,132.71355 785.66145,132.40626 786.09375,132.20313 C 786.52604,131.9948 787.00781,131.89063 787.53906,131.89063 C 788.47656,131.89063 789.17708,132.13543 789.64063,132.625 C 790.10937,133.10938 790.34374,133.84115 790.34375,134.82031 L 790.34375,140.60938 L 788.07031,140.60938 L 788.07031,135.47656 C 788.07031,134.86719 787.96614,134.4323 787.75781,134.17188 C 787.55468,133.91147 787.22135,133.78126 786.75781,133.78125 C 786.22135,133.78126 785.79687,133.94271 785.48438,134.26563 C 785.17187,134.58334 785.01562,135.01823 785.01563,135.57031 L 785.01563,140.60938 L 782.74219,140.60938 M 796.07813,140.67188 C 795.86979,140.67708 795.61979,140.6849 795.32813,140.69531 C 795.04166,140.71094 794.85937,140.71875 794.78125,140.71875 C 793.91146,140.71875 793.3151,140.55729 792.99219,140.23438 C 792.67448,139.90625 792.51562,139.26302 792.51563,138.30469 L 792.51563,133.71094 L 791.39063,133.71094 L 791.39063,132.11719 L 792.51563,132.11719 L 792.51563,129.79688 L 794.76563,129.79688 L 794.76563,132.11719 L 796.07813,132.11719 L 796.07813,133.71094 L 794.76563,133.71094 L 794.76563,138.41406 C 794.76562,138.63802 794.8151,138.78646 794.91406,138.85938 C 795.01302,138.92709 795.21614,138.96094 795.52344,138.96094 L 796.07813,138.96094 L 796.07813,140.67188 M 802.63281,138.03125 L 804.89844,138.03125 C 804.66926,138.92709 804.20572,139.63021 803.50781,140.14063 C 802.8151,140.64583 801.96874,140.89844 800.96875,140.89844 C 799.73958,140.89844 798.76562,140.48698 798.04688,139.66406 C 797.32812,138.83594 796.96875,137.71615 796.96875,136.30469 C 796.96875,134.91407 797.32292,133.81772 798.03125,133.01563 C 798.73958,132.21355 799.70833,131.81251 800.9375,131.8125 C 802.23958,131.81251 803.24478,132.20834 803.95313,133 C 804.66145,133.78647 805.01562,134.90886 805.01563,136.36719 C 805.01562,136.52865 805.01301,136.65105 805.00781,136.73438 C 805.0078,136.8125 805.0026,136.88802 804.99219,136.96094 L 799.32031,136.96094 C 799.35156,137.62761 799.51302,138.13021 799.80469,138.46875 C 800.10156,138.80729 800.52604,138.97656 801.07813,138.97656 C 801.46874,138.97656 801.78906,138.90104 802.03906,138.75 C 802.28906,138.59375 802.48697,138.35417 802.63281,138.03125 M 799.32031,135.46875 L 802.66406,135.46875 C 802.64322,134.89584 802.48958,134.46094 802.20313,134.16406 C 801.92187,133.86199 801.51562,133.71094 800.98438,133.71094 C 800.48958,133.71094 800.09895,133.86199 799.8125,134.16406 C 799.53125,134.46615 799.36718,134.90105 799.32031,135.46875 M 806.52344,140.60938 L 806.52344,132.11719 L 808.63281,132.11719 L 808.63281,133.57031 C 808.92968,132.98699 809.27604,132.5599 809.67188,132.28906 C 810.0677,132.01303 810.53906,131.87501 811.08594,131.875 C 811.17447,131.87501 811.24218,131.87761 811.28906,131.88281 C 811.34114,131.88282 811.38281,131.88543 811.41406,131.89063 L 811.42188,134.19531 L 810.66406,134.19531 C 810.04427,134.19532 809.57812,134.35678 809.26563,134.67969 C 808.95312,135.00261 808.79687,135.48178 808.79688,136.11719 L 808.79688,140.60938 L 806.52344,140.60938"
+       id="text5737" />
+    <path
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 787.5,172.5 L 787.5,157.5 L 772.5,165 L 787.5,172.5 z "
+       id="path5745" />
+    <path
+       style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1"
+       d="M 810,150 L 810,165 L 780,165"
+       id="path5747" />
+    <g
+       id="g3601">
+      <path
+         id="text5753"
+         d="M 12.496094,197.64063 L 14.832032,197.64063 C 14.92057,198.27084 15.178382,198.73828 15.605469,199.04297 C 16.032548,199.34766 16.649735,199.5 17.457032,199.5 C 18.144525,199.5 18.662754,199.37761 19.011719,199.13281 C 19.36067,198.88802 19.535149,198.52604 19.535157,198.04688 C 19.535149,197.34896 18.532546,196.77084 16.527344,196.3125 C 16.501298,196.3073 16.47786,196.30209 16.457032,196.29688 C 16.404944,196.28646 16.324215,196.26823 16.214844,196.24219 C 15.141924,196.00782 14.3763,195.7448 13.917969,195.45313 C 13.511717,195.19271 13.201822,194.84245 12.988282,194.40234 C 12.774739,193.96225 12.667968,193.44272 12.667969,192.84375 C 12.667968,191.72397 13.048176,190.8659 13.808594,190.26953 C 14.569008,189.67319 15.667965,189.37501 17.105469,189.375 C 18.449212,189.37501 19.499993,189.69272 20.257813,190.32813 C 21.015616,190.96355 21.415355,191.85938 21.457032,193.01563 L 19.183594,193.01563 C 19.14192,192.45834 18.928379,192.03386 18.542969,191.74219 C 18.157546,191.45053 17.608067,191.3047 16.894532,191.30469 C 16.274735,191.3047 15.796871,191.42579 15.460938,191.66797 C 15.124997,191.91017 14.957028,192.25522 14.957032,192.70313 C 14.957028,193.31251 15.610674,193.76824 16.917969,194.07031 C 17.27213,194.15365 17.548172,194.21876 17.746094,194.26563 C 18.584629,194.47917 19.17968,194.64584 19.53125,194.76563 C 19.882805,194.88542 20.188794,195.01824 20.449219,195.16406 C 20.91796,195.42448 21.269522,195.76954 21.503907,196.19922 C 21.738272,196.62891 21.855459,197.14323 21.855469,197.74219 C 21.855459,198.94011 21.451814,199.86849 20.644532,200.52734 C 19.837232,201.1862 18.699212,201.51562 17.230469,201.51563 C 15.782548,201.51562 14.647133,201.17969 13.824219,200.50781 C 13.001301,199.83594 12.558593,198.88021 12.496094,197.64063 L 12.496094,197.64063 z M 23.566407,201.19531 L 23.566407,189.6875 L 25.824219,189.6875 L 25.824219,193.64063 C 26.131507,193.25522 26.497392,192.96485 26.921875,192.76953 C 27.34635,192.57423 27.82161,192.47657 28.347657,192.47656 C 28.84765,192.47657 29.299473,192.56251 29.703125,192.73438 C 30.106764,192.90626 30.433586,193.15105 30.683594,193.46875 C 30.855461,193.6823 30.976554,193.92709 31.046875,194.20313 C 31.117179,194.47917 31.152335,194.92188 31.152344,195.53125 L 31.152344,195.6875 L 31.152344,201.19531 L 28.894532,201.19531 L 28.894532,196.75 C 28.894525,195.69792 28.798171,195.03777 28.605469,194.76953 C 28.412755,194.50131 28.066401,194.36719 27.566407,194.36719 C 27.029944,194.36719 26.605465,194.52735 26.292969,194.84766 C 25.980466,195.16797 25.824216,195.60417 25.824219,196.15625 L 25.824219,201.19531 L 23.566407,201.19531 z M 33.191407,191.75781 L 33.191407,189.6875 L 35.464844,189.6875 L 35.464844,191.75781 L 33.191407,191.75781 z M 33.191407,201.19531 L 33.191407,192.70313 L 35.464844,192.70313 L 35.464844,201.19531 L 33.191407,201.19531 z M 37.886719,201.19531 L 37.886719,194.29688 L 36.675782,194.29688 L 36.675782,192.70313 L 37.886719,192.70313 L 37.886719,191.91406 C 37.886718,191.12241 38.091144,190.54038 38.5,190.16797 C 38.908852,189.79558 39.553383,189.60939 40.433594,189.60938 C 40.595048,189.60939 40.765621,189.61329 40.945313,189.62109 C 41.124996,189.62892 41.316402,189.64324 41.519532,189.66406 L 41.519532,191.46875 L 40.925782,191.46875 C 40.587236,191.46876 40.36458,191.51303 40.257813,191.60156 C 40.151038,191.69011 40.097653,191.85938 40.097657,192.10938 L 40.097657,192.70313 L 41.519532,192.70313 L 41.519532,194.29688 L 40.113282,194.29688 L 40.113282,201.19531 L 37.886719,201.19531 z M 46.449219,201.25781 C 46.240881,201.26302 45.992183,201.27214 45.703125,201.28516 C 45.414059,201.29818 45.230465,201.30469 45.152344,201.30469 C 44.28255,201.30469 43.687498,201.14193 43.367188,200.81641 C 43.046874,200.49089 42.886718,199.84896 42.886719,198.89063 L 42.886719,194.29688 L 41.761719,194.29688 L 41.761719,192.70313 L 42.886719,192.70313 L 42.886719,190.38281 L 45.136719,190.38281 L 45.136719,192.70313 L 46.449219,192.70313 L 46.449219,194.29688 L 45.136719,194.29688 L 45.136719,199 C 45.136716,199.22396 45.186195,199.3711 45.285157,199.44141 C 45.384111,199.51172 45.587236,199.54688 45.894532,199.54688 L 46.449219,199.54688 L 46.449219,201.25781 z "
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" />
+      <path
+         style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 24.746094,207.125 L 13.496094,222.125 L 20.996094,222.125 L 20.996094,229.625 L 28.496094,229.625 L 28.496094,222.125 L 35.996094,222.125 L 24.746094,207.125 z "
+         id="path5757" />
+    </g>
+    <g
+       id="g5795"
+       transform="translate(727.5,0)">
+      <text
+         sodipodi:linespacing="125%"
+         id="text5797"
+         y="201.19531"
+         x="31.8125"
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+         xml:space="preserve"><tspan
+           y="201.19531"
+           x="31.8125"
+           id="tspan5799"
+           sodipodi:role="line">Shift</tspan></text>
+      <path
+         id="path5801"
+         d="M 27.25,207.125 L 16,222.125 L 23.5,222.125 L 23.5,229.625 L 31,229.625 L 31,222.125 L 38.5,222.125 L 27.25,207.125 z "
+         style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 576.90234,189.63867 L 576.90234,192.20508 L 566.4375,196.48242 L 576.90234,200.74805 L 576.90234,203.31445 L 563.09766,197.63086 L 563.09766,195.29883 L 576.90234,189.63867 M 568.21875,237.68555 L 568.21875,236.31445 C 568.875,236.12695 569.35937,235.83789 569.67188,235.44727 C 569.98437,235.05664 570.14062,234.54883 570.14063,233.92383 L 570.14063,233.63086 L 568.21875,233.63086 L 568.21875,230.10352 L 571.76953,230.10352 L 571.76953,233.49023 C 571.76953,234.6543 571.46875,235.59179 570.86719,236.30273 C 570.27343,237.01367 569.39062,237.47461 568.21875,237.68555"
+       id="text5803" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 623.09766,189.63867 L 636.90234,195.29883 L 636.90234,197.63086 L 623.09766,203.31445 L 623.09766,200.74805 L 633.58594,196.48242 L 623.09766,192.20508 L 623.09766,189.63867 M 628.21875,233.63086 L 628.21875,230.10352 L 631.74609,230.10352 L 631.74609,233.63086 L 628.21875,233.63086"
+       id="text5813" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 688.44727,198.61523 C 688.44726,198.5293 688.44335,198.41602 688.43555,198.27539 C 688.42773,198.12696 688.42382,198.01758 688.42383,197.94727 C 688.42382,197.25977 688.49804,196.68946 688.64648,196.23633 C 688.79492,195.7754 689.0332,195.34571 689.36133,194.94727 C 689.61132,194.6504 689.98242,194.31056 690.47461,193.92773 C 690.9746,193.54493 691.29882,193.26759 691.44727,193.0957 C 691.75976,192.74415 691.9746,192.42775 692.0918,192.14648 C 692.20898,191.86525 692.26757,191.55665 692.26758,191.2207 C 692.26757,190.47853 692.06054,189.9004 691.64648,189.48633 C 691.23241,189.07228 690.65429,188.86525 689.91211,188.86523 C 689.16992,188.86525 688.58398,189.11525 688.1543,189.61523 C 687.73242,190.10744 687.50195,190.80275 687.46289,191.70117 L 684.1582,191.70117 L 684.1582,191.33789 C 684.1582,189.68947 684.67773,188.37697 685.7168,187.40039 C 686.76367,186.41603 688.16992,185.92385 689.93555,185.92383 C 691.74023,185.92385 693.17382,186.38869 694.23633,187.31836 C 695.30663,188.24025 695.84178,189.47853 695.8418,191.0332 C 695.84178,191.58009 695.77928,192.07228 695.6543,192.50977 C 695.5371,192.93946 695.3535,193.33399 695.10352,193.69336 C 694.78319,194.14649 694.2871,194.63868 693.61523,195.16992 C 692.95116,195.69337 692.54882,196.01759 692.4082,196.14258 C 692.11132,196.43165 691.89648,196.73634 691.76367,197.05664 C 691.63866,197.37696 691.57616,197.75977 691.57617,198.20508 C 691.57616,198.24415 691.58007,198.31055 691.58789,198.4043 C 691.59569,198.49805 691.5996,198.56836 691.59961,198.61523 L 688.44727,198.61523 M 688.2832,203.63086 L 688.2832,200.19727 L 691.74023,200.19727 L 691.74023,203.63086 L 688.2832,203.63086 M 686.31445,235.85742 L 692.12695,215.92383 L 693.73242,215.92383 L 687.89648,235.85742 L 686.31445,235.85742"
+       id="text5819" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 18,271.78906 C 17.911447,273.09636 17.406239,274.13542 16.484375,274.90625 C 15.5677,275.67708 14.369784,276.0625 12.890625,276.0625 C 11.187496,276.0625 9.8619761,275.53125 8.9140625,274.46875 C 7.971353,273.40625 7.4999993,271.91667 7.5,270 C 7.4999993,268.04167 7.9817696,266.54168 8.9453125,265.5 C 9.9088511,264.45834 11.294266,263.93751 13.101563,263.9375 C 14.570305,263.93751 15.729158,264.29689 16.578125,265.01563 C 17.432281,265.72918 17.901031,266.73959 17.984375,268.04688 L 15.648438,268.04688 C 15.54947,267.39584 15.283846,266.90105 14.851563,266.5625 C 14.419263,266.21876 13.83593,266.04688 13.101563,266.04688 C 12.059891,266.04688 11.268225,266.38282 10.726563,267.05469 C 10.184892,267.72657 9.9140594,268.70834 9.9140625,270 C 9.9140594,271.25 10.182288,272.21615 10.71875,272.89844 C 11.260412,273.58073 12.028641,273.92188 13.023438,273.92188 C 13.742181,273.92188 14.330722,273.73959 14.789063,273.375 C 15.247387,273.00521 15.544262,272.47657 15.679688,271.78906 L 18,271.78906 M 23.46875,275.80469 C 23.260412,275.8099 23.010412,275.81771 22.71875,275.82813 C 22.432288,275.84375 22.249996,275.85156 22.171875,275.85156 C 21.302081,275.85156 20.705727,275.6901 20.382813,275.36719 C 20.065103,275.03906 19.906249,274.39583 19.90625,273.4375 L 19.90625,268.84375 L 18.78125,268.84375 L 18.78125,267.25 L 19.90625,267.25 L 19.90625,264.92969 L 22.15625,264.92969 L 22.15625,267.25 L 23.46875,267.25 L 23.46875,268.84375 L 22.15625,268.84375 L 22.15625,273.54688 C 22.156247,273.77084 22.205726,273.91927 22.304688,273.99219 C 22.403642,274.0599 22.606767,274.09375 22.914063,274.09375 L 23.46875,274.09375 L 23.46875,275.80469 M 24.789063,275.74219 L 24.789063,267.25 L 26.898438,267.25 L 26.898438,268.70313 C 27.195309,268.1198 27.541663,267.69272 27.9375,267.42188 C 28.333329,267.14584 28.804682,267.00782 29.351563,267.00781 C 29.440099,267.00782 29.507807,267.01043 29.554688,267.01563 C 29.606765,267.01563 29.648432,267.01824 29.679688,267.02344 L 29.6875,269.32813 L 28.929688,269.32813 C 28.309891,269.32813 27.843746,269.48959 27.53125,269.8125 C 27.218747,270.13542 27.062497,270.61459 27.0625,271.25 L 27.0625,275.74219 L 24.789063,275.74219 M 31.023438,275.74219 L 31.023438,264.23438 L 33.296875,264.23438 L 33.296875,275.74219 L 31.023438,275.74219"
+       id="text5827" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 162.96875,266.49609 L 161.375,271.39453 L 164.57031,271.39453 L 162.96875,266.49609 M 161.59375,264.19141 L 164.32813,264.19141 L 168.47656,275.69922 L 165.99219,275.69922 L 165.21094,273.33203 L 160.75,273.33203 L 159.99219,275.69922 L 157.5,275.69922 L 161.59375,264.19141 M 169.53906,275.69922 L 169.53906,264.19141 L 171.8125,264.19141 L 171.8125,275.69922 L 169.53906,275.69922 M 177.64063,275.76172 C 177.43229,275.76693 177.18229,275.77474 176.89063,275.78516 C 176.60416,275.80078 176.42187,275.80859 176.34375,275.80859 C 175.47396,275.80859 174.8776,275.64714 174.55469,275.32422 C 174.23698,274.99609 174.07812,274.35287 174.07813,273.39453 L 174.07813,268.80078 L 172.95313,268.80078 L 172.95313,267.20703 L 174.07813,267.20703 L 174.07813,264.88672 L 176.32813,264.88672 L 176.32813,267.20703 L 177.64063,267.20703 L 177.64063,268.80078 L 176.32813,268.80078 L 176.32813,273.50391 C 176.32812,273.72787 176.3776,273.8763 176.47656,273.94922 C 176.57552,274.01693 176.77864,274.05078 177.08594,274.05078 L 177.64063,274.05078 L 177.64063,275.76172"
+       id="text5831" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 612.96875,266.53906 L 611.375,271.4375 L 614.57031,271.4375 L 612.96875,266.53906 M 611.59375,264.23438 L 614.32813,264.23438 L 618.47656,275.74219 L 615.99219,275.74219 L 615.21094,273.375 L 610.75,273.375 L 609.99219,275.74219 L 607.5,275.74219 L 611.59375,264.23438 M 619.53906,275.74219 L 619.53906,264.23438 L 621.8125,264.23438 L 621.8125,275.74219 L 619.53906,275.74219 M 627.64063,275.80469 C 627.43229,275.8099 627.18229,275.81771 626.89063,275.82813 C 626.60416,275.84375 626.42187,275.85156 626.34375,275.85156 C 625.47396,275.85156 624.8776,275.6901 624.55469,275.36719 C 624.23698,275.03906 624.07812,274.39583 624.07813,273.4375 L 624.07813,268.84375 L 622.95313,268.84375 L 622.95313,267.25 L 624.07813,267.25 L 624.07813,264.92969 L 626.32813,264.92969 L 626.32813,267.25 L 627.64063,267.25 L 627.64063,268.84375 L 626.32813,268.84375 L 626.32813,273.54688 C 626.32812,273.77084 626.3776,273.91927 626.47656,273.99219 C 626.57552,274.0599 626.77864,274.09375 627.08594,274.09375 L 627.64063,274.09375 L 627.64063,275.80469 M 642,274.38281 C 641.57291,274.96094 641.08593,275.38542 640.53906,275.65625 C 639.99739,275.92708 639.35937,276.0625 638.625,276.0625 C 637.01562,276.0625 635.71093,275.50521 634.71094,274.39063 C 633.71614,273.27084 633.21875,271.80209 633.21875,269.98438 C 633.21875,268.15105 633.71614,266.6849 634.71094,265.58594 C 635.70573,264.48699 637.03125,263.93751 638.6875,263.9375 C 640.1302,263.93751 641.30728,264.28387 642.21875,264.97656 C 643.1302,265.66407 643.67186,266.61199 643.84375,267.82031 L 641.42969,267.82031 C 641.28385,267.22136 640.98437,266.76563 640.53125,266.45313 C 640.08333,266.14063 639.49739,265.98438 638.77344,265.98438 C 637.80989,265.98438 637.05208,266.33855 636.5,267.04688 C 635.95312,267.75001 635.67968,268.72397 635.67969,269.96875 C 635.67968,271.21875 635.96614,272.19792 636.53906,272.90625 C 637.11197,273.61459 637.89843,273.96875 638.89844,273.96875 C 639.64843,273.96875 640.27603,273.7474 640.78125,273.30469 C 641.28645,272.86198 641.59895,272.25521 641.71875,271.48438 L 639.10938,271.48438 L 639.10938,269.51563 L 643.875,269.51563 L 643.875,275.74219 L 642.28906,275.74219 L 642,274.38281 M 645.96094,275.74219 L 645.96094,267.25 L 648.07031,267.25 L 648.07031,268.70313 C 648.36718,268.1198 648.71354,267.69272 649.10938,267.42188 C 649.5052,267.14584 649.97656,267.00782 650.52344,267.00781 C 650.61197,267.00782 650.67968,267.01043 650.72656,267.01563 C 650.77864,267.01563 650.82031,267.01824 650.85156,267.02344 L 650.85938,269.32813 L 650.10156,269.32813 C 649.48177,269.32813 649.01562,269.48959 648.70313,269.8125 C 648.39062,270.13542 648.23437,270.61459 648.23438,271.25 L 648.23438,275.74219 L 645.96094,275.74219"
+       id="text5835" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 828,271.78906 C 827.91145,273.09636 827.40624,274.13542 826.48438,274.90625 C 825.5677,275.67708 824.36978,276.0625 822.89063,276.0625 C 821.1875,276.0625 819.86198,275.53125 818.91406,274.46875 C 817.97135,273.40625 817.5,271.91667 817.5,270 C 817.5,268.04167 817.98177,266.54168 818.94531,265.5 C 819.90885,264.45834 821.29427,263.93751 823.10156,263.9375 C 824.5703,263.93751 825.72916,264.29689 826.57813,265.01563 C 827.43228,265.72918 827.90103,266.73959 827.98438,268.04688 L 825.64844,268.04688 C 825.54947,267.39584 825.28385,266.90105 824.85156,266.5625 C 824.41926,266.21876 823.83593,266.04688 823.10156,266.04688 C 822.05989,266.04688 821.26822,266.38282 820.72656,267.05469 C 820.18489,267.72657 819.91406,268.70834 819.91406,270 C 819.91406,271.25 820.18229,272.21615 820.71875,272.89844 C 821.26041,273.58073 822.02864,273.92188 823.02344,273.92188 C 823.74218,273.92188 824.33072,273.73959 824.78906,273.375 C 825.24739,273.00521 825.54426,272.47657 825.67969,271.78906 L 828,271.78906 M 833.46875,275.80469 C 833.26041,275.8099 833.01041,275.81771 832.71875,275.82813 C 832.43229,275.84375 832.25,275.85156 832.17188,275.85156 C 831.30208,275.85156 830.70573,275.6901 830.38281,275.36719 C 830.0651,275.03906 829.90625,274.39583 829.90625,273.4375 L 829.90625,268.84375 L 828.78125,268.84375 L 828.78125,267.25 L 829.90625,267.25 L 829.90625,264.92969 L 832.15625,264.92969 L 832.15625,267.25 L 833.46875,267.25 L 833.46875,268.84375 L 832.15625,268.84375 L 832.15625,273.54688 C 832.15625,273.77084 832.20573,273.91927 832.30469,273.99219 C 832.40364,274.0599 832.60677,274.09375 832.91406,274.09375 L 833.46875,274.09375 L 833.46875,275.80469 M 834.78906,275.74219 L 834.78906,267.25 L 836.89844,267.25 L 836.89844,268.70313 C 837.19531,268.1198 837.54166,267.69272 837.9375,267.42188 C 838.33333,267.14584 838.80468,267.00782 839.35156,267.00781 C 839.4401,267.00782 839.50781,267.01043 839.55469,267.01563 C 839.60677,267.01563 839.64843,267.01824 839.67969,267.02344 L 839.6875,269.32813 L 838.92969,269.32813 C 838.30989,269.32813 837.84375,269.48959 837.53125,269.8125 C 837.21875,270.13542 837.0625,270.61459 837.0625,271.25 L 837.0625,275.74219 L 834.78906,275.74219 M 841.02344,275.74219 L 841.02344,264.23438 L 843.29688,264.23438 L 843.29688,275.74219 L 841.02344,275.74219"
+       id="text5839" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 108.94531,264.01953 L 105.64844,252.51172 L 108.10156,252.51172 L 110.07031,260.62891 L 111.73438,252.51172 L 114.25781,252.51172 L 115.92188,260.62891 L 117.89063,252.51172 L 120.32031,252.51172 L 117.03125,264.01953 L 114.77344,264.01953 L 112.99219,255.20703 L 111.20313,264.01953 L 108.94531,264.01953 M 121.5,254.58203 L 121.5,252.51172 L 123.77344,252.51172 L 123.77344,254.58203 L 121.5,254.58203 M 121.5,264.01953 L 121.5,255.52734 L 123.77344,255.52734 L 123.77344,264.01953 L 121.5,264.01953 M 125.79688,264.01953 L 125.79688,255.52734 L 128.02344,255.52734 L 128.02344,256.53516 C 128.34114,256.12371 128.71614,255.81641 129.14844,255.61328 C 129.58072,255.40496 130.06249,255.30079 130.59375,255.30078 C 131.53124,255.30079 132.23176,255.54558 132.69531,256.03516 C 133.16405,256.51954 133.39843,257.25131 133.39844,258.23047 L 133.39844,264.01953 L 131.125,264.01953 L 131.125,258.88672 C 131.12499,258.27735 131.02083,257.84245 130.8125,257.58203 C 130.60937,257.32162 130.27604,257.19141 129.8125,257.19141 C 129.27604,257.19141 128.85156,257.35287 128.53906,257.67578 C 128.22656,257.9935 128.07031,258.42839 128.07031,258.98047 L 128.07031,264.01953 L 125.79688,264.01953 M 106.64844,284.01953 L 106.64844,272.51172 L 109.01563,272.51172 L 109.01563,277.23828 L 113.50781,272.51172 L 116.46875,272.51172 L 111.875,277.16797 L 116.88281,284.01953 L 113.99219,284.01953 L 110.24219,278.75391 L 109.01563,279.97266 L 109.01563,284.01953 L 106.64844,284.01953 M 122.9375,281.44141 L 125.20313,281.44141 C 124.97395,282.33724 124.51041,283.04037 123.8125,283.55078 C 123.11979,284.05599 122.27343,284.30859 121.27344,284.30859 C 120.04427,284.30859 119.07031,283.89714 118.35156,283.07422 C 117.63281,282.2461 117.27344,281.1263 117.27344,279.71484 C 117.27344,278.32422 117.6276,277.22787 118.33594,276.42578 C 119.04427,275.62371 120.01302,275.22267 121.24219,275.22266 C 122.54427,275.22267 123.54947,275.6185 124.25781,276.41016 C 124.96614,277.19662 125.3203,278.31902 125.32031,279.77734 C 125.3203,279.93881 125.3177,280.0612 125.3125,280.14453 C 125.31249,280.22266 125.30728,280.29818 125.29688,280.37109 L 119.625,280.37109 C 119.65625,281.03776 119.81771,281.54037 120.10938,281.87891 C 120.40625,282.21745 120.83073,282.38672 121.38281,282.38672 C 121.77343,282.38672 122.09374,282.3112 122.34375,282.16016 C 122.59374,282.00391 122.79166,281.76433 122.9375,281.44141 M 119.625,278.87891 L 122.96875,278.87891 C 122.94791,278.306 122.79426,277.8711 122.50781,277.57422 C 122.22656,277.27214 121.82031,277.1211 121.28906,277.12109 C 120.79427,277.1211 120.40364,277.27214 120.11719,277.57422 C 119.83593,277.87631 119.67187,278.3112 119.625,278.87891 M 127.16406,287.42578 L 127.16406,285.58984 C 127.23698,285.60026 127.3125,285.60807 127.39063,285.61328 C 127.46875,285.61849 127.57031,285.62109 127.69531,285.62109 C 128.14323,285.62109 128.47916,285.51432 128.70313,285.30078 C 128.92708,285.09245 129.03906,284.77734 129.03906,284.35547 C 129.03906,284.32422 129.03385,284.28516 129.02344,284.23828 C 129.01302,284.19141 129.0026,284.15234 128.99219,284.12109 L 125.92969,275.52734 L 128.42969,275.52734 L 130.21875,281.65234 L 131.96094,275.52734 L 134.35156,275.52734 L 130.85938,285.54297 C 130.59895,286.29297 130.27343,286.80338 129.88281,287.07422 C 129.49218,287.35026 128.90625,287.48828 128.125,287.48828 C 127.98437,287.48828 127.83333,287.48307 127.67188,287.47266 C 127.51041,287.46224 127.34114,287.44661 127.16406,287.42578"
+       id="text5872" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 708.94531,264.01953 L 705.64844,252.51172 L 708.10156,252.51172 L 710.07031,260.62891 L 711.73438,252.51172 L 714.25781,252.51172 L 715.92188,260.62891 L 717.89063,252.51172 L 720.32031,252.51172 L 717.03125,264.01953 L 714.77344,264.01953 L 712.99219,255.20703 L 711.20313,264.01953 L 708.94531,264.01953 M 721.5,254.58203 L 721.5,252.51172 L 723.77344,252.51172 L 723.77344,254.58203 L 721.5,254.58203 M 721.5,264.01953 L 721.5,255.52734 L 723.77344,255.52734 L 723.77344,264.01953 L 721.5,264.01953 M 725.79688,264.01953 L 725.79688,255.52734 L 728.02344,255.52734 L 728.02344,256.53516 C 728.34114,256.12371 728.71614,255.81641 729.14844,255.61328 C 729.58072,255.40496 730.06249,255.30079 730.59375,255.30078 C 731.53124,255.30079 732.23176,255.54558 732.69531,256.03516 C 733.16405,256.51954 733.39843,257.25131 733.39844,258.23047 L 733.39844,264.01953 L 731.125,264.01953 L 731.125,258.88672 C 731.12499,258.27735 731.02083,257.84245 730.8125,257.58203 C 730.60937,257.32162 730.27604,257.19141 729.8125,257.19141 C 729.27604,257.19141 728.85156,257.35287 728.53906,257.67578 C 728.22656,257.9935 728.07031,258.42839 728.07031,258.98047 L 728.07031,264.01953 L 725.79688,264.01953 M 706.64844,284.01953 L 706.64844,272.51172 L 709.01563,272.51172 L 709.01563,277.23828 L 713.50781,272.51172 L 716.46875,272.51172 L 711.875,277.16797 L 716.88281,284.01953 L 713.99219,284.01953 L 710.24219,278.75391 L 709.01563,279.97266 L 709.01563,284.01953 L 706.64844,284.01953 M 722.9375,281.44141 L 725.20313,281.44141 C 724.97395,282.33724 724.51041,283.04037 723.8125,283.55078 C 723.11979,284.05599 722.27343,284.30859 721.27344,284.30859 C 720.04427,284.30859 719.07031,283.89714 718.35156,283.07422 C 717.63281,282.2461 717.27344,281.1263 717.27344,279.71484 C 717.27344,278.32422 717.6276,277.22787 718.33594,276.42578 C 719.04427,275.62371 720.01302,275.22267 721.24219,275.22266 C 722.54427,275.22267 723.54947,275.6185 724.25781,276.41016 C 724.96614,277.19662 725.3203,278.31902 725.32031,279.77734 C 725.3203,279.93881 725.3177,280.0612 725.3125,280.14453 C 725.31249,280.22266 725.30728,280.29818 725.29688,280.37109 L 719.625,280.37109 C 719.65625,281.03776 719.81771,281.54037 720.10938,281.87891 C 720.40625,282.21745 720.83073,282.38672 721.38281,282.38672 C 721.77343,282.38672 722.09374,282.3112 722.34375,282.16016 C 722.59374,282.00391 722.79166,281.76433 722.9375,281.44141 M 719.625,278.87891 L 722.96875,278.87891 C 722.94791,278.306 722.79426,277.8711 722.50781,277.57422 C 722.22656,277.27214 721.82031,277.1211 721.28906,277.12109 C 720.79427,277.1211 720.40364,277.27214 720.11719,277.57422 C 719.83593,277.87631 719.67187,278.3112 719.625,278.87891 M 727.16406,287.42578 L 727.16406,285.58984 C 727.23698,285.60026 727.3125,285.60807 727.39063,285.61328 C 727.46875,285.61849 727.57031,285.62109 727.69531,285.62109 C 728.14323,285.62109 728.47916,285.51432 728.70313,285.30078 C 728.92708,285.09245 729.03906,284.77734 729.03906,284.35547 C 729.03906,284.32422 729.03385,284.28516 729.02344,284.23828 C 729.01302,284.19141 729.0026,284.15234 728.99219,284.12109 L 725.92969,275.52734 L 728.42969,275.52734 L 730.21875,281.65234 L 731.96094,275.52734 L 734.35156,275.52734 L 730.85938,285.54297 C 730.59895,286.29297 730.27343,286.80338 729.88281,287.07422 C 729.49218,287.35026 728.90625,287.48828 728.125,287.48828 C 727.98437,287.48828 727.83333,287.48307 727.67188,287.47266 C 727.51041,287.46224 727.34114,287.44661 727.16406,287.42578"
+       id="text5878" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 759.98438,275.60938 L 759.98438,264.10156 L 763.48438,264.10156 L 765.77344,272.85938 L 768.03125,264.10156 L 771.54688,264.10156 L 771.54688,275.60938 L 769.32813,275.60938 L 769.32813,266.32813 L 766.99219,275.60938 L 764.57031,275.60938 L 762.20313,266.32813 L 762.20313,275.60938 L 759.98438,275.60938 M 778.99219,273.03125 L 781.25781,273.03125 C 781.02864,273.92709 780.5651,274.63021 779.86719,275.14063 C 779.17447,275.64583 778.32812,275.89844 777.32813,275.89844 C 776.09896,275.89844 775.125,275.48698 774.40625,274.66406 C 773.6875,273.83594 773.32812,272.71615 773.32813,271.30469 C 773.32812,269.91407 773.68229,268.81772 774.39063,268.01563 C 775.09896,267.21355 776.06771,266.81251 777.29688,266.8125 C 778.59895,266.81251 779.60416,267.20834 780.3125,268 C 781.02083,268.78647 781.37499,269.90886 781.375,271.36719 C 781.37499,271.52865 781.37239,271.65105 781.36719,271.73438 C 781.36718,271.8125 781.36197,271.88802 781.35156,271.96094 L 775.67969,271.96094 C 775.71093,272.62761 775.87239,273.13021 776.16406,273.46875 C 776.46093,273.80729 776.88541,273.97656 777.4375,273.97656 C 777.82812,273.97656 778.14843,273.90104 778.39844,273.75 C 778.64843,273.59375 778.84635,273.35417 778.99219,273.03125 M 775.67969,270.46875 L 779.02344,270.46875 C 779.0026,269.89584 778.84895,269.46094 778.5625,269.16406 C 778.28124,268.86199 777.87499,268.71094 777.34375,268.71094 C 776.84895,268.71094 776.45833,268.86199 776.17188,269.16406 C 775.89062,269.46615 775.72656,269.90105 775.67969,270.46875 M 782.88281,275.60938 L 782.88281,267.11719 L 785.10938,267.11719 L 785.10938,268.125 C 785.42708,267.71355 785.80208,267.40626 786.23438,267.20313 C 786.66666,266.9948 787.14843,266.89063 787.67969,266.89063 C 788.61718,266.89063 789.3177,267.13543 789.78125,267.625 C 790.24999,268.10938 790.48437,268.84115 790.48438,269.82031 L 790.48438,275.60938 L 788.21094,275.60938 L 788.21094,270.47656 C 788.21093,269.86719 788.10676,269.4323 787.89844,269.17188 C 787.69531,268.91147 787.36197,268.78126 786.89844,268.78125 C 786.36197,268.78126 785.9375,268.94272 785.625,269.26563 C 785.3125,269.58334 785.15625,270.01823 785.15625,270.57031 L 785.15625,275.60938 L 782.88281,275.60938 M 800.01563,267.11719 L 800.01563,275.60938 L 797.78906,275.60938 L 797.78906,274.60156 C 797.46614,275.01302 797.08854,275.32292 796.65625,275.53125 C 796.22916,275.73437 795.74739,275.83594 795.21094,275.83594 C 794.27864,275.83594 793.57812,275.59115 793.10938,275.10156 C 792.64583,274.61198 792.41406,273.88021 792.41406,272.90625 L 792.41406,267.11719 L 794.6875,267.11719 L 794.6875,272.25 C 794.6875,272.85417 794.78906,273.28646 794.99219,273.54688 C 795.19531,273.80209 795.53125,273.92969 796,273.92969 C 796.53124,273.92969 796.95312,273.77084 797.26563,273.45313 C 797.58333,273.13021 797.74218,272.69271 797.74219,272.14063 L 797.74219,267.11719 L 800.01563,267.11719"
+       id="text5884" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 104.41406,17.103516 L 104.41406,10.212891 L 101.74219,10.212891 L 101.74219,8.7949219 L 101.94141,8.7949219 C 102.89453,8.7949367 103.58984,8.6621243 104.02734,8.3964844 C 104.47265,8.1308749 104.73828,7.6894691 104.82422,7.0722656 L 106.59375,7.0722656 L 106.59375,17.103516 L 104.41406,17.103516 M 106.72266,36.369141 L 106.72266,39.826172 L 103.24219,39.826172 L 103.24219,36.369141 L 106.72266,36.369141 M 105.89063,41.173828 L 106.80469,48.978516 L 106.80469,53.630859 L 103.19531,53.630859 L 103.19531,48.978516 L 104.10938,41.173828 L 105.89063,41.173828"
+       id="text5890" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 160.85156,47.103516 C 160.875,46.197273 161.08984,45.431649 161.49609,44.806641 C 161.91015,44.18165 162.63672,43.548838 163.67578,42.908203 C 163.82422,42.822276 164.03125,42.701183 164.29688,42.544922 C 165.74218,41.724621 166.46484,40.931653 166.46484,40.166016 C 166.46484,39.720717 166.32031,39.369155 166.03125,39.111328 C 165.74218,38.85353 165.34375,38.724624 164.83594,38.724609 C 164.27343,38.724624 163.83984,38.88478 163.53516,39.205078 C 163.23047,39.517592 163.07812,39.966811 163.07813,40.552734 L 163.07813,40.646484 L 161.03906,40.646484 C 161.03906,39.498061 161.37891,38.615249 162.05859,37.998047 C 162.73828,37.380876 163.71093,37.072282 164.97656,37.072266 C 166.11718,37.072282 167.02343,37.353532 167.69531,37.916016 C 168.37499,38.470718 168.71484,39.212905 168.71484,40.142578 C 168.71484,40.814466 168.53905,41.39259 168.1875,41.876953 C 167.83593,42.361339 167.14843,42.919933 166.125,43.552734 C 165.89843,43.701182 165.57812,43.896494 165.16406,44.138672 C 164.22656,44.685556 163.69922,45.115243 163.58203,45.427734 L 168.62109,45.427734 L 168.62109,47.103516 L 160.85156,47.103516"
+       id="text5910" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 220.92188,44.033203 L 223.05469,44.033203 C 223.07031,44.603525 223.22265,45.029305 223.51172,45.310547 C 223.80078,45.591805 224.23437,45.73243 224.8125,45.732422 C 225.36718,45.73243 225.79687,45.599617 226.10156,45.333984 C 226.40624,45.068368 226.55859,44.689462 226.55859,44.197266 C 226.55859,43.697276 226.38281,43.322276 226.03125,43.072266 C 225.67968,42.814464 225.15234,42.685558 224.44922,42.685547 L 224.10938,42.685547 L 224.10938,41.291016 L 224.35547,41.291016 C 225.0039,41.291028 225.48046,41.181653 225.78516,40.962891 C 226.09765,40.736341 226.2539,40.392591 226.25391,39.931641 C 226.2539,39.54103 226.12109,39.232436 225.85547,39.005859 C 225.58984,38.771499 225.23437,38.654312 224.78906,38.654297 C 224.29687,38.654312 223.91797,38.787124 223.65234,39.052734 C 223.38672,39.310561 223.2539,39.681655 223.25391,40.166016 L 223.25391,40.236328 L 221.16797,40.236328 C 221.19141,39.212905 221.51953,38.431656 222.15234,37.892578 C 222.79297,37.345719 223.70312,37.072282 224.88281,37.072266 C 225.99218,37.072282 226.86718,37.314469 227.50781,37.798828 C 228.15624,38.283218 228.48046,38.943374 228.48047,39.779297 C 228.48046,40.21681 228.36718,40.603529 228.14063,40.939453 C 227.92187,41.26759 227.59374,41.537121 227.15625,41.748047 C 227.72656,41.974621 228.15624,42.291027 228.44531,42.697266 C 228.74218,43.095714 228.89062,43.564463 228.89063,44.103516 C 228.89062,45.119149 228.52343,45.923836 227.78906,46.517578 C 227.06249,47.103522 226.07031,47.396491 224.8125,47.396484 C 223.57031,47.396491 222.60937,47.107428 221.92969,46.529297 C 221.25781,45.95118 220.92187,45.134774 220.92188,44.080078 L 220.92188,44.033203"
+       id="text5922" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 278.92969,21.685547 C 279.86719,21.037112 280.53125,20.439456 280.92188,19.892578 C 281.32031,19.345707 281.51953,18.75977 281.51953,18.134766 C 281.51953,17.837896 281.47265,17.525397 281.37891,17.197266 C 281.28515,16.861335 281.14843,16.509773 280.96875,16.142578 L 278.90625,16.142578 L 278.90625,14.841797 L 280.17188,14.841797 C 279.82812,14.162119 279.57812,13.556651 279.42188,13.025391 C 279.26562,12.494152 279.1875,11.998059 279.1875,11.537109 C 279.1875,10.146498 279.69531,9.021499 280.71094,8.1621094 C 281.73437,7.3027507 283.08203,6.8730636 284.75391,6.8730469 C 286.5664,6.8730636 287.98827,7.3379069 289.01953,8.2675781 C 290.05077,9.1972801 290.61327,10.517591 290.70703,12.228516 L 287.47266,12.228516 C 287.41015,11.345715 287.15624,10.669935 286.71094,10.201172 C 286.26562,9.7324358 285.65624,9.498061 284.88281,9.4980469 C 284.14843,9.498061 283.58203,9.6894671 283.18359,10.072266 C 282.79296,10.455091 282.59765,11.005872 282.59766,11.724609 C 282.59765,12.138683 282.84375,12.888683 283.33594,13.974609 C 283.50781,14.349619 283.63671,14.638681 283.72266,14.841797 L 287.0625,14.841797 L 287.0625,16.142578 L 284.20313,16.142578 C 284.27343,16.43946 284.32421,16.712898 284.35547,16.962891 C 284.38671,17.212897 284.40234,17.443366 284.40234,17.654297 C 284.40234,18.216802 284.22656,18.779302 283.875,19.341797 C 283.53124,19.896488 282.94531,20.548831 282.11719,21.298828 C 282.625,21.064456 283.08203,20.892581 283.48828,20.783203 C 283.90234,20.666019 284.27734,20.607425 284.61328,20.607422 C 285.01952,20.607425 285.57421,20.701175 286.27734,20.888672 C 286.98046,21.068362 287.48046,21.158206 287.77734,21.158203 C 288.16796,21.158206 288.55077,21.095706 288.92578,20.970703 C 289.30858,20.845706 289.68749,20.6543 290.0625,20.396484 L 291.09375,22.939453 C 290.4453,23.322266 289.82421,23.611328 289.23047,23.806641 C 288.63671,24.009765 288.08202,24.111328 287.56641,24.111328 C 286.97265,24.111328 286.16796,23.955078 285.15234,23.642578 C 284.14453,23.330078 283.41406,23.173829 282.96094,23.173828 C 282.48437,23.173829 282.01953,23.251954 281.56641,23.408203 C 281.12109,23.564453 280.6875,23.798828 280.26563,24.111328 L 278.92969,21.685547 M 284.94141,40.025391 C 284.05859,40.025404 283.29687,40.345716 282.65625,40.986328 C 282.01562,41.626965 281.69531,42.384777 281.69531,43.259766 C 281.69531,44.1504 282.01171,44.912118 282.64453,45.544922 C 283.27734,46.169929 284.04296,46.482429 284.94141,46.482422 C 285.82421,46.482429 286.58202,46.169929 287.21484,45.544922 C 287.85546,44.912118 288.17577,44.1504 288.17578,43.259766 C 288.17577,42.384777 287.85546,41.626965 287.21484,40.986328 C 286.58202,40.345716 285.82421,40.025404 284.94141,40.025391 M 279.65625,36.779297 L 282.05859,39.158203 C 282.48046,38.85353 282.92578,38.626968 283.39453,38.478516 C 283.86328,38.322281 284.37109,38.244156 284.91797,38.244141 C 285.46484,38.244156 285.97655,38.322281 286.45313,38.478516 C 286.93749,38.626968 287.39062,38.85353 287.8125,39.158203 L 290.19141,36.779297 L 291.42188,38.033203 L 289.04297,40.435547 C 289.33983,40.849622 289.56249,41.294934 289.71094,41.771484 C 289.85936,42.240246 289.93358,42.736339 289.93359,43.259766 C 289.93358,43.783213 289.85936,44.279306 289.71094,44.748047 C 289.56249,45.216805 289.33983,45.666024 289.04297,46.095703 L 291.42188,48.498047 L 290.19141,49.716797 L 287.8125,47.337891 C 287.39062,47.650397 286.9414,47.880865 286.46484,48.029297 C 285.98827,48.17774 285.48046,48.251959 284.94141,48.251953 C 284.3789,48.251959 283.85937,48.17774 283.38281,48.029297 C 282.91406,47.880865 282.47265,47.650397 282.05859,47.337891 L 279.65625,49.716797 L 278.4375,48.498047 L 280.80469,46.095703 C 280.50781,45.673836 280.28515,45.23243 280.13672,44.771484 C 279.99609,44.302744 279.92578,43.798838 279.92578,43.259766 C 279.92578,42.736339 279.99609,42.240246 280.13672,41.771484 C 280.28515,41.294934 280.50781,40.849622 280.80469,40.435547 L 278.4375,38.033203 L 279.65625,36.779297"
+       id="text5928" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 352.875,47.701172 C 352.74217,49.662113 351.98436,51.220706 350.60156,52.376953 C 349.22655,53.533203 347.42968,54.111328 345.21094,54.111328 C 342.65624,54.111328 340.66796,53.314453 339.24609,51.720703 C 337.83203,50.126957 337.125,47.892584 337.125,45.017578 C 337.125,42.08009 337.84765,39.830092 339.29297,38.267578 C 340.73828,36.705095 342.8164,35.923846 345.52734,35.923828 C 347.73046,35.923846 349.46874,36.462908 350.74219,37.541016 C 352.02342,38.611343 352.72655,40.126967 352.85156,42.087891 L 349.34766,42.087891 C 349.19921,41.111341 348.80077,40.369154 348.15234,39.861328 C 347.50389,39.345717 346.6289,39.087905 345.52734,39.087891 C 343.96484,39.087905 342.77734,39.591811 341.96484,40.599609 C 341.15234,41.607434 340.74609,43.080089 340.74609,45.017578 C 340.74609,46.892585 341.14843,48.341802 341.95313,49.365234 C 342.76562,50.388675 343.91796,50.900393 345.41016,50.900391 C 346.48827,50.900393 347.37108,50.626956 348.05859,50.080078 C 348.74608,49.525395 349.19139,48.732427 349.39453,47.701172 L 352.875,47.701172"
+       id="text5946" />
+    <path
+       transform="matrix(1.16233,0,-0.444745,0.860341,0,0)"
+       style="font-size:16.72912407px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 307.52845,53.268758 L 317.31434,53.268758 L 317.31434,54.894293 L 307.52845,54.894293 L 307.52845,53.268758 M 307.52845,49.756296 L 317.31434,49.756296 L 317.31434,51.381831 L 307.52845,51.381831 L 307.52845,49.756296"
+       id="text5956" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 411.45117,50.150391 L 411.45117,46.142578 L 408.63867,50.150391 L 411.45117,50.150391 M 411.45117,53.630859 L 411.45117,51.591797 L 406.98633,51.591797 L 406.98633,49.962891 L 410.90039,44.513672 L 413.51367,44.513672 L 413.51367,50.103516 L 414.73242,50.103516 L 414.73242,51.591797 L 413.51367,51.591797 L 413.51367,53.630859 L 411.45117,53.630859 M 398.58398,54.111328 L 408.7793,36.615234 L 410.70117,36.615234 L 400.48242,54.111328 L 398.58398,54.111328 M 397.78711,46.458984 L 397.78711,40.025391 L 395.26758,40.025391 L 395.26758,38.701172 L 395.44336,38.701172 C 396.36523,38.701187 397.0332,38.576187 397.44727,38.326172 C 397.86914,38.076187 398.11914,37.658219 398.19727,37.072266 L 399.88477,37.072266 L 399.88477,46.458984 L 397.78711,46.458984"
+       id="text5960" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 467.0918,53.630859 C 467.11522,52.779298 467.32225,52.064455 467.71289,51.486328 C 468.11131,50.900393 468.80663,50.31055 469.79883,49.716797 C 469.95506,49.630863 470.16991,49.50977 470.44336,49.353516 C 471.7949,48.595708 472.47068,47.861334 472.4707,47.150391 C 472.47068,46.736335 472.33006,46.40821 472.04883,46.166016 C 471.76756,45.923836 471.38475,45.802742 470.90039,45.802734 C 470.36912,45.802742 469.95506,45.95118 469.6582,46.248047 C 469.36913,46.544929 469.22459,46.966804 469.22461,47.513672 L 469.22461,47.607422 L 467.2793,47.607422 C 467.27928,46.529304 467.6035,45.70118 468.25195,45.123047 C 468.90038,44.537118 469.82616,44.24415 471.0293,44.244141 C 472.12303,44.24415 472.99412,44.505868 473.64258,45.029297 C 474.29881,45.552742 474.62693,46.251961 474.62695,47.126953 C 474.62693,47.751959 474.45506,48.294927 474.11133,48.755859 C 473.77537,49.208989 473.11522,49.72852 472.13086,50.314453 C 471.9199,50.439456 471.63084,50.607425 471.26367,50.818359 C 470.34959,51.341799 469.83397,51.744143 469.7168,52.025391 L 474.50977,52.025391 L 474.50977,53.630859 L 467.0918,53.630859 M 458.68945,54.111328 L 468.88477,36.615234 L 470.80664,36.615234 L 460.58789,54.111328 L 458.68945,54.111328 M 457.89258,46.458984 L 457.89258,40.025391 L 455.37305,40.025391 L 455.37305,38.701172 L 455.54883,38.701172 C 456.4707,38.701187 457.13867,38.576187 457.55273,38.326172 C 457.97461,38.076187 458.22461,37.658219 458.30273,37.072266 L 459.99023,37.072266 L 459.99023,46.458984 L 457.89258,46.458984"
+       id="text5967" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 531.83203,50.150391 L 531.83203,46.142578 L 529.01953,50.150391 L 531.83203,50.150391 M 531.83203,53.630859 L 531.83203,51.591797 L 527.36719,51.591797 L 527.36719,49.962891 L 531.28125,44.513672 L 533.89453,44.513672 L 533.89453,50.103516 L 535.11328,50.103516 L 535.11328,51.591797 L 533.89453,51.591797 L 533.89453,53.630859 L 531.83203,53.630859 M 518.96484,54.111328 L 529.16016,36.615234 L 531.08203,36.615234 L 520.86328,54.111328 L 518.96484,54.111328 M 514.88672,43.599609 L 516.89063,43.599609 C 516.91406,44.130869 517.0625,44.529306 517.33594,44.794922 C 517.61718,45.052743 518.03125,45.181649 518.57813,45.181641 C 519.10937,45.181649 519.51953,45.060555 519.80859,44.818359 C 520.09765,44.568368 520.24218,44.208994 520.24219,43.740234 C 520.24218,43.271495 520.07421,42.919933 519.73828,42.685547 C 519.40234,42.443371 518.90625,42.322277 518.25,42.322266 C 518.20312,42.322277 518.14453,42.326183 518.07422,42.333984 C 518.0039,42.341808 517.94922,42.345714 517.91016,42.345703 L 517.91016,41.033203 L 518.14453,41.033203 C 518.76171,41.033216 519.21484,40.931653 519.50391,40.728516 C 519.80078,40.517591 519.94921,40.193373 519.94922,39.755859 C 519.94921,39.388686 519.82421,39.099624 519.57422,38.888672 C 519.32421,38.669937 518.98437,38.560562 518.55469,38.560547 C 518.08593,38.560562 517.72265,38.685562 517.46484,38.935547 C 517.21484,39.177749 517.08984,39.525405 517.08984,39.978516 L 517.08984,40.048828 L 515.08594,40.048828 C 515.10156,39.087905 515.41797,38.353531 516.03516,37.845703 C 516.65234,37.330094 517.52343,37.072282 518.64844,37.072266 C 519.70312,37.072282 520.53906,37.302751 521.15625,37.763672 C 521.77343,38.216812 522.08202,38.833999 522.08203,39.615234 C 522.08202,40.02931 521.97655,40.392591 521.76563,40.705078 C 521.55468,41.009778 521.23827,41.263684 520.81641,41.466797 C 521.36327,41.677746 521.77343,41.970715 522.04688,42.345703 C 522.32812,42.712902 522.46874,43.154307 522.46875,43.669922 C 522.46874,44.607431 522.11718,45.349618 521.41406,45.896484 C 520.71874,46.443367 519.77343,46.716804 518.57813,46.716797 C 517.39062,46.716804 516.47656,46.451179 515.83594,45.919922 C 515.20312,45.380868 514.88672,44.615243 514.88672,43.623047 L 514.88672,43.599609"
+       id="text5973" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 586.63477,39.404297 L 586.63477,42.498047 L 583.36523,42.498047 L 583.36523,39.474609 C 583.36523,38.482437 583.66992,37.654313 584.2793,36.990234 C 584.88867,36.326189 585.67382,35.970721 586.63477,35.923828 L 586.63477,37.119141 C 586.04101,37.259782 585.59961,37.509782 585.31055,37.869141 C 585.02148,38.220719 584.87695,38.681656 584.87695,39.251953 L 584.87695,39.404297 L 586.63477,39.404297"
+       id="text5979" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 643.36523,39.474609 L 643.36523,36.369141 L 646.63477,36.369141 L 646.63477,39.427734 C 646.63476,40.412123 646.33007,41.240247 645.7207,41.912109 C 645.11132,42.576183 644.32617,42.931651 643.36523,42.978516 L 643.36523,41.771484 C 643.95898,41.630871 644.39648,41.384778 644.67773,41.033203 C 644.96679,40.673841 645.11132,40.201185 645.11133,39.615234 L 645.11133,39.474609 L 643.36523,39.474609"
+       id="text5985" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 706.89258,53.630859 L 703.50586,53.630859 L 703.50586,47.560547 L 703.27148,47.150391 L 698.00977,47.150391 L 698.00977,45.826172 L 702.49805,45.826172 L 701.64258,44.337891 L 698.00977,44.337891 L 698.00977,43.025391 L 700.86914,43.025391 L 697.61133,37.330078 L 701.41992,37.330078 L 705.19336,44.724609 L 708.69727,37.330078 L 712.27148,37.330078 L 709.27148,43.025391 L 712.00195,43.025391 L 712.00195,44.337891 L 708.58008,44.337891 L 707.7832,45.826172 L 712.00195,45.826172 L 712.00195,47.150391 L 707.0918,47.150391 L 706.89258,47.560547 L 706.89258,53.630859"
+       id="text5991" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 764.97656,19.306641 C 765.46093,19.306645 765.8789,19.482426 766.23047,19.833984 C 766.58202,20.18555 766.7578,20.603519 766.75781,21.087891 C 766.7578,21.564455 766.58202,21.974611 766.23047,22.318359 C 765.8789,22.66211 765.46093,22.833985 764.97656,22.833984 C 764.48437,22.833985 764.06249,22.666017 763.71094,22.330078 C 763.36718,21.994142 763.1953,21.58008 763.19531,21.087891 C 763.1953,20.595706 763.36718,20.177738 763.71094,19.833984 C 764.06249,19.482426 764.48437,19.306645 764.97656,19.306641 M 757.94531,15.298828 L 771.98438,15.298828 L 771.98438,17.630859 L 757.94531,17.630859 L 757.94531,15.298828 M 764.97656,10.095703 C 765.46093,10.095717 765.8789,10.271498 766.23047,10.623047 C 766.58202,10.96681 766.7578,11.380872 766.75781,11.865234 C 766.7578,12.357433 766.58202,12.779308 766.23047,13.130859 C 765.88671,13.47462 765.46874,13.646494 764.97656,13.646484 C 764.48437,13.646494 764.06249,13.47462 763.71094,13.130859 C 763.36718,12.779308 763.1953,12.357433 763.19531,11.865234 C 763.1953,11.373059 763.36718,10.955091 763.71094,10.611328 C 764.06249,10.267591 764.48437,10.095717 764.97656,10.095703 M 759.84375,39.544922 L 765.11719,44.818359 L 770.40234,39.544922 L 772.05469,41.173828 L 766.78125,46.482422 L 772.05469,51.755859 L 770.40234,53.396484 L 765.11719,48.111328 L 759.84375,53.396484 L 758.20313,51.755859 L 763.48828,46.482422 L 758.20313,41.173828 L 759.84375,39.544922"
+       id="text5997" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 134.9707,69.826172 L 132.58008,77.173828 L 137.37305,77.173828 L 134.9707,69.826172 M 132.9082,66.369141 L 137.00977,66.369141 L 143.23242,83.630859 L 139.50586,83.630859 L 138.33398,80.080078 L 131.64258,80.080078 L 130.50586,83.630859 L 126.76758,83.630859 L 132.9082,66.369141 M 135.70898,64.166016 L 135.70898,61.283203 L 138.35742,61.283203 L 138.35742,64.166016 L 135.70898,64.166016 M 131.63086,64.166016 L 131.63086,61.283203 L 134.2793,61.283203 L 134.2793,64.166016 L 131.63086,64.166016"
+       id="text6003" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 194.9707,62.126953 C 194.5957,62.126975 194.27538,62.267599 194.00977,62.548828 C 193.74413,62.822286 193.61132,63.154317 193.61133,63.544922 C 193.61132,63.927754 193.74023,64.251973 193.99805,64.517578 C 194.26366,64.783222 194.58788,64.916034 194.9707,64.916016 C 195.36132,64.916034 195.69335,64.783222 195.9668,64.517578 C 196.24804,64.24416 196.38866,63.919942 196.38867,63.544922 C 196.38866,63.16213 196.24804,62.830099 195.9668,62.548828 C 195.69335,62.267599 195.36132,62.126975 194.9707,62.126953 M 194.9707,60.521484 C 195.81444,60.521507 196.52929,60.814476 197.11523,61.400391 C 197.70116,61.978537 197.99413,62.685568 197.99414,63.521484 C 197.99413,64.357441 197.70116,65.068378 197.11523,65.654297 C 196.52929,66.232439 195.81444,66.521501 194.9707,66.521484 C 194.13476,66.521501 193.42773,66.232439 192.84961,65.654297 C 192.27929,65.07619 191.99414,64.365254 191.99414,63.521484 C 191.99414,62.677755 192.27929,61.966819 192.84961,61.388672 C 193.42773,60.81057 194.13476,60.521507 194.9707,60.521484 M 192.7207,67.072266 L 197.23242,67.072266 L 203.23242,83.630859 L 199.50586,83.630859 L 198.33398,80.080078 L 191.64258,80.080078 L 190.50586,83.630859 L 186.76758,83.630859 L 192.7207,67.072266 M 194.9707,69.826172 L 192.58008,77.173828 L 197.37305,77.173828 L 194.9707,69.826172"
+       id="text6007" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 248.52539,83.630859 L 248.52539,66.369141 L 261.05273,66.369141 L 261.05273,69.369141 L 252.0293,69.369141 L 252.0293,73.048828 L 260.2793,73.048828 L 260.2793,76.001953 L 252.0293,76.001953 L 252.0293,80.443359 L 261.47461,80.443359 L 261.47461,83.630859 L 248.52539,83.630859 M 258.24023,60.521484 L 254.57227,64.857422 L 252.9082,64.857422 L 255.2168,60.521484 L 258.24023,60.521484"
+       id="text6011" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 313.72266,101.49056 L 313.72266,104.29134 L 314.88281,104.29134 C 315.5703,104.29135 316.07421,104.18198 316.39453,103.96322 C 316.71483,103.74448 316.87499,103.40073 316.875,102.93197 C 316.87499,102.43979 316.70311,102.07651 316.35938,101.84212 C 316.01561,101.60776 315.48436,101.49057 314.76563,101.49056 L 313.72266,101.49056 M 311.37891,100.00228 L 315.16406,100.00228 C 316.53905,100.00229 317.5703,100.23667 318.25781,100.70541 C 318.95311,101.16636 319.30077,101.85776 319.30078,102.77962 C 319.30077,103.42026 319.11327,103.96713 318.73828,104.42025 C 318.36327,104.87338 317.84374,105.18198 317.17969,105.34603 L 319.34766,109.67025 L 316.72266,109.67025 L 314.88281,105.70931 L 313.72266,105.70931 L 313.72266,109.67025 L 311.37891,109.67025 L 311.37891,100.00228 M 315,97.717125 C 314.0078,97.717141 313.08593,97.892922 312.23438,98.244469 C 311.38281,98.588234 310.61718,99.099952 309.9375,99.779625 C 309.22656,100.49058 308.67968,101.29917 308.29688,102.20541 C 307.91406,103.10385 307.72265,104.03354 307.72266,104.99447 C 307.72265,105.96323 307.90234,106.8851 308.26172,107.76009 C 308.62109,108.62729 309.14062,109.40072 309.82031,110.08041 C 310.51562,110.79135 311.30859,111.33822 312.19922,111.72103 C 313.08984,112.09603 314.01562,112.28353 314.97656,112.28353 C 315.91405,112.28353 316.82421,112.09994 317.70703,111.73275 C 318.59764,111.36556 319.40624,110.83822 320.13281,110.15072 C 320.81248,109.49447 321.33983,108.72885 321.71484,107.85384 C 322.08983,106.97885 322.27733,106.0726 322.27734,105.13509 C 322.27733,104.09604 322.10155,103.13901 321.75,102.264 C 321.40623,101.38901 320.89061,100.60386 320.20313,99.908531 C 319.49999,99.181983 318.70702,98.635109 317.82422,98.267906 C 316.94921,97.900734 316.0078,97.717141 315,97.717125 M 314.97656,96.275719 C 316.17968,96.275736 317.31249,96.502298 318.375,96.955406 C 319.4453,97.400735 320.39842,98.049172 321.23438,98.900719 C 322.03905,99.713233 322.65233,100.64292 323.07422,101.68978 C 323.49608,102.73667 323.70701,103.84604 323.70703,105.01791 C 323.70701,106.20541 323.48826,107.33041 323.05078,108.39291 C 322.61326,109.4476 321.97655,110.37728 321.14063,111.18197 C 320.30467,112.00228 319.35155,112.63119 318.28125,113.06869 C 317.21874,113.50619 316.11718,113.72494 314.97656,113.72494 C 313.81249,113.72494 312.69921,113.49838 311.63672,113.04525 C 310.57421,112.59213 309.625,111.93978 308.78906,111.08822 C 307.97656,110.26791 307.35547,109.33822 306.92578,108.29916 C 306.5039,107.25229 306.29297,106.15854 306.29297,105.01791 C 306.29297,104.22104 306.39844,103.4476 306.60938,102.69759 C 306.82031,101.93979 307.13672,101.20151 307.55859,100.48275 C 308.34765,99.154639 309.39062,98.12339 310.6875,97.389 C 311.98437,96.646829 313.41405,96.275736 314.97656,96.275719"
+       id="text6015" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 372.0293,69.064453 L 376.06055,69.064453 C 377.84179,69.064468 379.18944,69.505874 380.10352,70.388672 C 381.01756,71.263684 381.47459,72.556652 381.47461,74.267578 C 381.47459,75.939461 381.02538,77.228522 380.12695,78.134766 C 379.23632,79.033208 377.95897,79.482426 376.29492,79.482422 L 372.0293,79.482422 L 372.0293,83.630859 L 368.52539,83.630859 L 368.52539,66.369141 L 372.0293,66.369141 L 372.0293,69.064453 M 372.05273,76.599609 L 375.47461,76.599609 C 376.4121,76.599616 377.09179,76.416023 377.51367,76.048828 C 377.93554,75.673836 378.14647,75.080087 378.14648,74.267578 C 378.14647,73.509776 377.93554,72.939464 377.51367,72.556641 C 377.09179,72.166027 376.47069,71.970715 375.65039,71.970703 L 372.05273,71.970703 L 372.05273,76.599609"
+       id="text6019" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 428.08594,66.322266 L 431.67188,66.322266 L 431.67188,77.150391 C 431.67187,78.486333 431.93749,79.462895 432.46875,80.080078 C 432.99999,80.689456 433.84374,80.994143 435,80.994141 C 436.17187,80.994143 437.02343,80.689456 437.55469,80.080078 C 438.09374,79.470707 438.36327,78.494146 438.36328,77.150391 L 438.36328,66.322266 L 441.91406,66.322266 L 441.91406,77.537109 C 441.91405,79.654301 441.3203,81.279299 440.13281,82.412109 C 438.95311,83.544922 437.24999,84.111328 435.02344,84.111328 C 432.78124,84.111328 431.0625,83.548828 429.86719,82.423828 C 428.67969,81.291018 428.08594,79.662113 428.08594,77.537109 L 428.08594,66.322266 M 435.73828,64.166016 L 435.73828,61.283203 L 438.38672,61.283203 L 438.38672,64.166016 L 435.73828,64.166016 M 431.66016,64.166016 L 431.66016,61.283203 L 434.30859,61.283203 L 434.30859,64.166016 L 431.66016,64.166016"
+       id="text6023" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 488.08594,66.105469 L 491.67188,66.105469 L 491.67188,76.933594 C 491.67187,78.269536 491.93749,79.246098 492.46875,79.863281 C 492.99999,80.472659 493.84374,80.777346 495,80.777344 C 496.17187,80.777346 497.02343,80.472659 497.55469,79.863281 C 498.09374,79.25391 498.36327,78.277349 498.36328,76.933594 L 498.36328,66.105469 L 501.91406,66.105469 L 501.91406,77.320313 C 501.91405,79.437504 501.3203,81.062502 500.13281,82.195313 C 498.95311,83.328125 497.24999,83.894531 495.02344,83.894531 C 492.78124,83.894531 491.0625,83.332031 489.86719,82.207031 C 488.67969,81.074221 488.08594,79.445316 488.08594,77.320313 L 488.08594,66.105469 M 498.45703,60.304688 L 494.78906,64.640625 L 493.125,64.640625 L 495.43359,60.304688 L 498.45703,60.304688"
+       id="text6029" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 552.43945,83.630859 L 552.43945,66.369141 L 555.99023,66.369141 L 555.99023,83.630859 L 552.43945,83.630859 M 557.66602,60.521484 L 553.99805,64.857422 L 552.33398,64.857422 L 554.64258,60.521484 L 557.66602,60.521484"
+       id="text6033" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 610.18359,75 C 610.18359,76.898444 610.60546,78.375005 611.44922,79.429688 C 612.29296,80.476566 613.47265,81.000003 614.98828,81 C 616.51952,81.000003 617.71093,80.476566 618.5625,79.429688 C 619.41405,78.375005 619.83983,76.898444 619.83984,75 C 619.83983,73.101573 619.41405,71.628918 618.5625,70.582031 C 617.71093,69.527358 616.51952,69.000015 614.98828,69 C 613.47265,69.000015 612.29296,69.523452 611.44922,70.570313 C 610.60546,71.617199 610.18359,73.093761 610.18359,75 M 606.5625,75 C 606.5625,72.210949 607.32031,70.000014 608.83594,68.367188 C 610.35937,66.726579 612.41015,65.906268 614.98828,65.90625 C 617.56639,65.906268 619.61717,66.726579 621.14063,68.367188 C 622.67186,70.007826 623.43748,72.218761 623.4375,75 C 623.43748,77.781256 622.67186,79.992191 621.14063,81.632813 C 619.61717,83.273438 617.56639,84.09375 614.98828,84.09375 C 612.41015,84.09375 610.35937,83.273438 608.83594,81.632813 C 607.32031,79.992191 606.5625,77.781256 606.5625,75 M 618.44531,60.503906 L 614.77734,64.839844 L 613.11328,64.839844 L 615.42188,60.503906 L 618.44531,60.503906"
+       id="text6037" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 670.18359,75.017578 C 670.18359,76.916022 670.60546,78.392583 671.44922,79.447266 C 672.29296,80.494144 673.47265,81.017581 674.98828,81.017578 C 676.51952,81.017581 677.71093,80.494144 678.5625,79.447266 C 679.41405,78.392583 679.83983,76.916022 679.83984,75.017578 C 679.83983,73.119151 679.41405,71.646496 678.5625,70.599609 C 677.71093,69.544936 676.51952,69.017593 674.98828,69.017578 C 673.47265,69.017593 672.29296,69.54103 671.44922,70.587891 C 670.60546,71.634778 670.18359,73.111339 670.18359,75.017578 M 666.5625,75.017578 C 666.5625,72.228527 667.32031,70.017592 668.83594,68.384766 C 670.35937,66.744158 672.41015,65.923846 674.98828,65.923828 C 677.56639,65.923846 679.61717,66.744158 681.14063,68.384766 C 682.67186,70.025404 683.43748,72.23634 683.4375,75.017578 C 683.43748,77.798834 682.67186,80.009769 681.14063,81.650391 C 679.61717,83.291016 677.56639,84.111328 674.98828,84.111328 C 672.41015,84.111328 670.35937,83.291016 668.83594,81.650391 C 667.32031,80.009769 666.5625,77.798834 666.5625,75.017578 M 675.72656,64.166016 L 675.72656,61.283203 L 678.375,61.283203 L 678.375,64.166016 L 675.72656,64.166016 M 671.64844,64.166016 L 671.64844,61.283203 L 674.29688,61.283203 L 674.29688,64.166016 L 671.64844,64.166016"
+       id="text6041" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 735.5332,106.35352 L 735.5332,103.35352 L 739.44727,99.966797 L 739.44727,102.75586 L 737.04492,104.8418 L 739.44727,106.92773 L 739.44727,109.74023 L 735.5332,106.35352 M 730.4707,106.35352 L 730.4707,103.35352 L 734.4082,99.966797 L 734.4082,102.75586 L 732.00586,104.8418 L 734.4082,106.92773 L 734.4082,109.74023 L 730.4707,106.35352"
+       id="text6045" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 799.44727,103.3418 L 799.44727,106.3418 L 795.5332,109.72852 L 795.5332,106.93945 L 797.93555,104.83008 L 795.5332,102.76758 L 795.5332,99.955078 L 799.44727,103.3418 M 794.4082,103.3418 L 794.4082,106.3418 L 790.4707,109.72852 L 790.4707,106.93945 L 792.86133,104.83008 L 790.4707,102.76758 L 790.4707,99.955078 L 794.4082,103.3418"
+       id="text6051" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 883.81641,76.535881 L 886.23047,76.535881 L 886.23047,85.418694 L 883.81641,85.418694 L 883.81641,76.535881 M 883.81641,64.535881 L 886.23047,64.535881 L 886.23047,73.418694 L 883.81641,73.418694 L 883.81641,64.535881 M 877.98047,101.19213 L 892.01953,101.19213 L 892.01953,107.07494 L 889.6875,107.07494 L 889.6875,103.48901 L 877.98047,103.48901 L 877.98047,101.19213"
+       id="text6057" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 149.9707,129.82617 L 147.58008,137.17383 L 152.37305,137.17383 L 149.9707,129.82617 M 147.9082,126.36914 L 152.00977,126.36914 L 158.23242,143.63086 L 154.50586,143.63086 L 153.33398,140.08008 L 146.64258,140.08008 L 145.50586,143.63086 L 141.76758,143.63086 L 147.9082,126.36914 M 153.42773,120.52148 L 149.75977,124.85742 L 148.0957,124.85742 L 150.4043,120.52148 L 153.42773,120.52148"
+       id="text6065" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 211.40625,137.91797 C 211.71874,137.73829 211.95312,137.53907 212.10938,137.32031 C 212.26562,137.10157 212.34374,136.86719 212.34375,136.61719 C 212.34374,136.31251 212.2539,136.0547 212.07422,135.84375 C 211.89452,135.62501 211.52343,135.3711 210.96094,135.08203 L 207.85547,133.47656 C 207.55078,133.65626 207.3164,133.85938 207.15234,134.08594 C 206.99609,134.31251 206.91797,134.5547 206.91797,134.8125 C 206.91797,135.1172 207.03125,135.38673 207.25781,135.62109 C 207.49218,135.84766 208.0039,136.16407 208.79297,136.57031 L 211.40625,137.91797 M 205.03125,141.75 L 207.92578,141.75 C 207.98828,142.35938 208.16796,142.8125 208.46484,143.10938 C 208.76953,143.40625 209.19921,143.55469 209.75391,143.55469 C 210.26952,143.55469 210.67968,143.43359 210.98438,143.19141 C 211.28905,142.94141 211.4414,142.60547 211.44141,142.18359 C 211.4414,141.83985 211.32812,141.54297 211.10156,141.29297 C 210.87499,141.03516 210.42577,140.74219 209.75391,140.41406 L 206.95313,138.99609 C 206.0625,138.55079 205.39844,138.03907 204.96094,137.46094 C 204.52344,136.88282 204.30469,136.23438 204.30469,135.51563 C 204.30469,134.82032 204.47266,134.21095 204.80859,133.6875 C 205.15234,133.15626 205.65625,132.71485 206.32031,132.36328 C 205.92969,132.01173 205.64062,131.62892 205.45313,131.21484 C 205.26562,130.79298 205.17187,130.32814 205.17188,129.82031 C 205.17187,128.64845 205.57422,127.70705 206.37891,126.99609 C 207.18359,126.27736 208.2539,125.91799 209.58984,125.91797 C 210.96484,125.91799 212.04296,126.26955 212.82422,126.97266 C 213.60546,127.6758 214.0078,128.64845 214.03125,129.89063 L 211.26563,129.89063 C 211.24999,129.3672 211.09374,128.96876 210.79688,128.69531 C 210.50781,128.42189 210.08984,128.28517 209.54297,128.28516 C 209.05859,128.28517 208.68359,128.39064 208.41797,128.60156 C 208.16015,128.81251 208.03125,129.10939 208.03125,129.49219 C 208.03125,129.8047 208.18359,130.09767 208.48828,130.37109 C 208.80078,130.63673 209.35937,130.95704 210.16406,131.33203 L 212.13281,132.24609 C 213.1328,132.72267 213.87108,133.25392 214.34766,133.83984 C 214.82421,134.41798 215.06249,135.08595 215.0625,135.84375 C 215.06249,136.55469 214.8828,137.17579 214.52344,137.70703 C 214.17186,138.23047 213.66405,138.63672 213,138.92578 C 213.45312,139.32422 213.79296,139.76563 214.01953,140.25 C 214.24608,140.73438 214.35936,141.26563 214.35938,141.84375 C 214.35936,143.04688 213.92968,144.03906 213.07031,144.82031 C 212.21093,145.60937 211.10546,146.0039 209.75391,146.00391 C 208.26953,146.0039 207.1289,145.64453 206.33203,144.92578 C 205.53515,144.20703 205.10156,143.14844 205.03125,141.75 M 203.97656,173.625 L 203.97656,160.59375 C 203.97656,159.29689 204.48047,158.25002 205.48828,157.45313 C 206.49609,156.64845 207.83984,156.24611 209.51953,156.24609 C 211.23046,156.24611 212.5703,156.63674 213.53906,157.41797 C 214.5078,158.19923 214.99217,159.27345 214.99219,160.64063 C 214.99217,161.48439 214.84764,162.17579 214.55859,162.71484 C 214.27733,163.25392 213.83983,163.66798 213.24609,163.95703 C 214.16796,164.32423 214.85936,164.86329 215.32031,165.57422 C 215.78905,166.28516 216.02342,167.16016 216.02344,168.19922 C 216.02342,169.94922 215.51952,171.36328 214.51172,172.44141 C 213.5039,173.51953 212.18358,174.05859 210.55078,174.05859 C 210.32421,174.05859 210.0703,174.04687 209.78906,174.02344 C 209.51562,174 209.21874,173.96484 208.89844,173.91797 L 208.89844,171.17578 C 208.99999,171.19141 209.10156,171.20313 209.20313,171.21094 C 209.31249,171.21875 209.47265,171.22266 209.68359,171.22266 C 210.60546,171.22266 211.3164,170.96875 211.81641,170.46094 C 212.3164,169.94532 212.5664,169.21485 212.56641,168.26953 C 212.5664,167.35548 212.29296,166.66016 211.74609,166.18359 C 211.20702,165.70704 210.41796,165.46876 209.37891,165.46875 L 209.0625,165.46875 L 209.07422,163.06641 C 209.12109,163.07423 209.17187,163.08204 209.22656,163.08984 C 209.28124,163.08985 209.36327,163.08985 209.47266,163.08984 C 210.16796,163.08985 210.6953,162.91798 211.05469,162.57422 C 211.42187,162.22267 211.60546,161.71486 211.60547,161.05078 C 211.60546,160.38673 211.41405,159.88283 211.03125,159.53906 C 210.65624,159.18751 210.10546,159.01173 209.37891,159.01172 C 208.70703,159.01173 208.19531,159.20705 207.84375,159.59766 C 207.49218,159.98048 207.3164,160.54298 207.31641,161.28516 L 207.31641,173.625 L 203.97656,173.625"
+       id="text6073" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 267.09961,140.51367 L 269.94727,140.51367 C 271.60351,140.51367 272.80272,140.08008 273.54492,139.21289 C 274.2871,138.34571 274.65819,136.94727 274.6582,135.01758 C 274.65819,133.09571 274.31053,131.68165 273.61523,130.77539 C 272.92772,129.86134 271.8496,129.40431 270.38086,129.4043 L 267.09961,129.4043 L 267.09961,133.23633 L 270.88477,133.23633 L 270.88477,135.47461 L 267.09961,135.47461 L 267.09961,140.51367 M 263.61914,143.63086 L 263.61914,135.47461 L 261.74414,135.47461 L 261.74414,133.23633 L 263.61914,133.23633 L 263.61914,126.36914 L 270.4043,126.36914 C 273.04491,126.36916 275.01366,127.084 276.31055,128.51367 C 277.60741,129.93556 278.25584,132.10353 278.25586,135.01758 C 278.25584,136.60352 278.01756,137.99805 277.54102,139.20117 C 277.07225,140.4043 276.38084,141.36914 275.4668,142.0957 C 274.77928,142.64258 273.99413,143.03711 273.11133,143.2793 C 272.23632,143.51367 271.00585,143.63086 269.41992,143.63086 L 263.61914,143.63086"
+       id="text6077" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 626.72461,139.55273 C 627.17773,140.04493 627.68945,140.41211 628.25977,140.6543 C 628.83007,140.89649 629.47069,141.01758 630.18164,141.01758 C 631.71288,141.01758 632.90428,140.49414 633.75586,139.44727 C 634.60741,138.39258 635.03319,136.91602 635.0332,135.01758 C 635.03319,134.24415 634.96288,133.54493 634.82227,132.91992 C 634.68163,132.28712 634.4785,131.73634 634.21289,131.26758 L 626.72461,139.55273 M 625.98633,138.36914 L 633.39258,130.21289 C 632.9785,129.81447 632.50585,129.51759 631.97461,129.32227 C 631.44335,129.11916 630.84569,129.01759 630.18164,129.01758 C 628.66601,129.01759 627.48632,129.54103 626.64258,130.58789 C 625.79882,131.63478 625.37695,133.11134 625.37695,135.01758 C 625.37695,135.72071 625.42382,136.34571 625.51758,136.89258 C 625.61914,137.43946 625.77539,137.93165 625.98633,138.36914 M 621.36914,143.36133 L 623.51367,140.9707 C 622.91992,140.16602 622.47851,139.27149 622.18945,138.28711 C 621.90039,137.29493 621.75586,136.20509 621.75586,135.01758 C 621.75586,132.22853 622.51367,130.01759 624.0293,128.38477 C 625.55273,126.74416 627.60351,125.92385 630.18164,125.92383 C 631.28319,125.92385 632.27147,126.06447 633.14648,126.3457 C 634.02928,126.62697 634.84178,127.06056 635.58398,127.64648 L 637.30664,125.70117 L 638.45508,126.73242 L 636.63867,128.70117 C 637.30272,129.5215 637.79881,130.45509 638.12695,131.50195 C 638.46287,132.54884 638.63084,133.72071 638.63086,135.01758 C 638.63084,137.79883 637.86912,140.00977 636.3457,141.65039 C 634.82225,143.29102 632.76757,144.11133 630.18164,144.11133 C 629.01757,144.11133 627.96679,143.94727 627.0293,143.61914 C 626.0996,143.29102 625.26367,142.79102 624.52148,142.11914 L 622.50586,144.4043 L 621.36914,143.36133"
+       id="text6081" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 690,127.98633 C 689.42968,127.98634 688.9414,128.18556 688.53516,128.58398 C 688.13672,128.98244 687.9375,129.4629 687.9375,130.02539 C 687.9375,130.60353 688.13672,131.09181 688.53516,131.49023 C 688.93359,131.88868 689.42187,132.0879 690,132.08789 C 690.5625,132.0879 691.04296,131.88478 691.44141,131.47852 C 691.83984,131.07228 692.03906,130.5879 692.03906,130.02539 C 692.03906,129.4629 691.83984,128.98244 691.44141,128.58398 C 691.04296,128.18556 690.5625,127.98634 690,127.98633 M 690,126.47461 C 690.98437,126.47463 691.82031,126.82619 692.50781,127.5293 C 693.20312,128.22462 693.55077,129.06447 693.55078,130.04883 C 693.55077,131.0254 693.20312,131.86134 692.50781,132.55664 C 691.81249,133.25196 690.96875,133.59962 689.97656,133.59961 C 688.99218,133.59962 688.15625,133.25587 687.46875,132.56836 C 686.78906,131.88087 686.44922,131.04103 686.44922,130.04883 C 686.44922,129.05666 686.79297,128.21291 687.48047,127.51758 C 688.17578,126.82228 689.01562,126.47463 690,126.47461 M 695.51953,156.29883 L 695.51953,157.59961 L 694.19531,157.59961 L 694.19531,173.63086 L 692.42578,173.63086 L 692.42578,157.59961 L 690.57422,157.59961 L 690.57422,173.63086 L 688.78125,173.63086 L 688.78125,164.44336 C 687.47656,164.39649 686.43359,164.00196 685.65234,163.25977 C 684.87109,162.51759 684.48047,161.56056 684.48047,160.38867 C 684.48047,159.15431 684.89844,158.16603 685.73438,157.42383 C 686.57031,156.67385 687.67968,156.29885 689.0625,156.29883 L 695.51953,156.29883"
+       id="text6085" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 373.13672,6.5214844 L 376.08984,6.5214844 L 381.72656,13.095703 L 378.97266,13.095703 L 374.625,8.7480469 L 370.25391,13.095703 L 367.5,13.095703 L 373.13672,6.5214844"
+       id="text6091" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 750.67969,128.67773 L 750.67969,125.79492 L 753.32813,125.79492 L 753.32813,128.67773 L 750.67969,128.67773 M 746.60156,128.67773 L 746.60156,125.79492 L 749.25,125.79492 L 749.25,128.67773 L 746.60156,128.67773 M 753.39844,155.0332 L 749.73047,159.36914 L 748.06641,159.36914 L 750.375,155.0332 L 753.39844,155.0332"
+       id="text6099" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 171.07031,197.29102 L 175.92188,197.29102 L 175.92188,189.29883 L 173.97656,189.29883 L 171.07031,197.29102 M 165,203.63086 L 171.80859,186.36914 L 187.81641,186.36914 L 187.81641,189.36914 L 179.34375,189.36914 L 179.34375,193.04883 L 187.05469,193.04883 L 187.05469,196.00195 L 179.34375,196.00195 L 179.34375,200.44336 L 188.25,200.44336 L 188.25,203.63086 L 175.92188,203.63086 L 175.92188,200.08008 L 170.0625,200.08008 L 168.76172,203.63086 L 165,203.63086"
+       id="text6105" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 300.46875,193.23633 C 300.32031,193.22071 300.20312,193.20899 300.11719,193.20117 C 300.03906,193.19337 299.96484,193.18946 299.89453,193.18945 C 299.05859,193.18946 298.42578,193.53321 297.99609,194.2207 C 297.5664,194.90821 297.35156,195.92384 297.35156,197.26758 C 297.35156,198.04102 297.4375,198.70899 297.60938,199.27148 C 297.78906,199.83399 298.04687,200.28711 298.38281,200.63086 L 300.46875,193.23633 M 296.68359,206.49023 L 297.48047,203.63086 C 296.30859,203.13867 295.42187,202.35352 294.82031,201.27539 C 294.21875,200.19727 293.91797,198.85352 293.91797,197.24414 C 293.91797,195.11134 294.45312,193.43946 295.52344,192.22852 C 296.60156,191.01759 298.07421,190.41212 299.94141,190.41211 C 300.15234,190.41212 300.35937,190.41994 300.5625,190.43555 C 300.76562,190.45119 300.96874,190.47462 301.17188,190.50586 L 301.69922,188.56055 L 302.97656,188.56055 L 302.34375,190.78711 C 303.32811,191.09181 304.09765,191.63478 304.65234,192.41602 C 305.20702,193.18946 305.52733,194.17774 305.61328,195.38086 L 302.32031,195.36914 C 302.28124,194.98634 302.1914,194.65821 302.05078,194.38477 C 301.91796,194.10353 301.72265,193.85743 301.46484,193.64648 L 299.36719,201.13477 C 299.38281,201.13477 299.40624,201.13867 299.4375,201.14648 C 299.67187,201.16992 299.85156,201.18164 299.97656,201.18164 C 300.66406,201.18164 301.19921,200.99024 301.58203,200.60742 C 301.97265,200.22461 302.23437,199.62305 302.36719,198.80273 L 305.66016,198.80273 C 305.54296,200.41993 304.96874,201.70117 303.9375,202.64648 C 302.91405,203.5918 301.59374,204.06445 299.97656,204.06445 C 299.76562,204.06445 299.55077,204.05664 299.33203,204.04102 C 299.11328,204.02539 298.88671,204.00195 298.65234,203.9707 L 297.96094,206.49023 L 296.68359,206.49023 M 304.19531,223.0957 L 301.99219,223.0957 C 301.92968,222.54884 301.72264,222.12696 301.37109,221.83008 C 301.01952,221.5254 300.55468,221.37306 299.97656,221.37305 C 299.26562,221.37306 298.70702,221.69337 298.30078,222.33398 C 297.89452,222.96681 297.6914,223.85353 297.69141,224.99414 C 297.6914,226.14259 297.89452,227.01758 298.30078,227.61914 C 298.70702,228.22071 299.29687,228.52149 300.07031,228.52148 C 300.64061,228.52149 301.09765,228.35743 301.44141,228.0293 C 301.78514,227.70118 301.99218,227.23633 302.0625,226.63477 L 304.32422,226.62305 C 304.2617,227.70899 303.83592,228.58008 303.04688,229.23633 C 302.2578,229.89258 301.24218,230.22071 300,230.2207 C 298.54687,230.22071 297.39843,229.75977 296.55469,228.83789 C 295.71874,227.91602 295.30078,226.65821 295.30078,225.06445 C 295.30078,223.45509 295.72656,222.17384 296.57813,221.2207 C 297.43749,220.25978 298.58593,219.77931 300.02344,219.7793 C 301.21093,219.77931 302.18749,220.084 302.95313,220.69336 C 303.72655,221.30275 304.14061,222.10353 304.19531,223.0957 M 300,217.7168 C 298.99999,217.71681 298.06249,217.8965 297.1875,218.25586 C 296.32031,218.61525 295.54687,219.13869 294.86719,219.82617 C 294.17187,220.52931 293.64062,221.32618 293.27344,222.2168 C 292.90625,223.09962 292.72265,224.0254 292.72266,224.99414 C 292.72265,225.97071 292.90625,226.89649 293.27344,227.77148 C 293.64062,228.64649 294.17187,229.43164 294.86719,230.12695 C 295.55468,230.81446 296.33984,231.3418 297.22266,231.70898 C 298.10546,232.07617 299.03124,232.25977 300,232.25977 C 300.96874,232.25977 301.89452,232.07617 302.77734,231.70898 C 303.66796,231.3418 304.46874,230.80664 305.17969,230.10352 C 305.86717,229.43164 306.3867,228.66211 306.73828,227.79492 C 307.09764,226.92774 307.27733,225.99415 307.27734,224.99414 C 307.27733,224.00978 307.09373,223.08009 306.72656,222.20508 C 306.36717,221.32228 305.84373,220.53712 305.15625,219.84961 C 304.46092,219.15431 303.67577,218.62697 302.80078,218.26758 C 301.92577,217.90041 300.99218,217.71681 300,217.7168 M 299.97656,216.27539 C 301.16405,216.27541 302.28514,216.49416 303.33984,216.93164 C 304.40233,217.36916 305.35155,218.00587 306.1875,218.8418 C 307.0078,219.66212 307.63279,220.60353 308.0625,221.66602 C 308.49217,222.72071 308.70701,223.8379 308.70703,225.01758 C 308.70701,226.20509 308.49217,227.31446 308.0625,228.3457 C 307.64061,229.37696 307.01561,230.29883 306.1875,231.11133 C 305.3203,231.95508 304.35155,232.60352 303.28125,233.05664 C 302.21093,233.50195 301.10936,233.72461 299.97656,233.72461 C 298.82812,233.72461 297.73046,233.50586 296.68359,233.06836 C 295.64453,232.62305 294.70312,231.97852 293.85938,231.13477 C 293.02343,230.30664 292.38672,229.36914 291.94922,228.32227 C 291.51172,227.26758 291.29297,226.16602 291.29297,225.01758 C 291.29297,223.85353 291.51172,222.74415 291.94922,221.68945 C 292.38672,220.62697 293.02343,219.66994 293.85938,218.81836 C 294.67968,217.99025 295.60937,217.36134 296.64844,216.93164 C 297.68749,216.49416 298.79687,216.27541 299.97656,216.27539"
+       id="text6109" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 472.88672,203.63086 L 472.88672,186.36914 L 476.60156,186.36914 L 483.60938,198.22852 L 483.60938,186.36914 L 487.11328,186.36914 L 487.11328,203.63086 L 483.44531,203.63086 L 476.39063,191.77148 L 476.39063,203.63086 L 472.88672,203.63086 M 483.82031,181.0957 C 483.61717,182.07229 483.31639,182.79494 482.91797,183.26367 C 482.51952,183.72463 482.0078,183.9551 481.38281,183.95508 C 481.21874,183.9551 481.0664,183.94729 480.92578,183.93164 C 480.78515,183.90822 480.64452,183.87307 480.50391,183.82617 L 479.48438,183.52148 C 479.33593,183.48244 479.19921,183.4551 479.07422,183.43945 C 478.94921,183.41604 478.82812,183.40432 478.71094,183.4043 C 478.44531,183.40432 478.23046,183.47463 478.06641,183.61523 C 477.90234,183.75588 477.77343,183.98635 477.67969,184.30664 L 476.39063,184.30664 C 476.57812,183.36135 476.86718,182.66604 477.25781,182.2207 C 477.64843,181.77541 478.15624,181.55276 478.78125,181.55273 C 478.9453,181.55276 479.10937,181.56838 479.27344,181.59961 C 479.43749,181.62307 479.60937,181.66213 479.78906,181.7168 L 480.87891,182.00977 C 480.97265,182.04104 481.0703,182.06447 481.17188,182.08008 C 481.28124,182.09572 481.39843,182.10354 481.52344,182.10352 C 481.77343,182.10354 481.98046,182.02151 482.14453,181.85742 C 482.3164,181.68557 482.4453,181.43166 482.53125,181.0957 L 483.82031,181.0957"
+       id="text6113" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 535.83398,220.83432 L 539.2207,220.83432 L 538.33008,225.93198 C 538.21289,226.55698 538.12304,227.15073 538.06055,227.71323 C 537.99804,228.26792 537.96679,228.72104 537.9668,229.0726 C 537.96679,229.79917 538.13085,230.34214 538.45898,230.70151 C 538.7871,231.05307 539.2871,231.22885 539.95898,231.22885 C 540.74023,231.22885 541.3457,230.90854 541.77539,230.26791 C 542.21288,229.62729 542.57616,228.49058 542.86523,226.85776 L 543.91992,220.83432 L 547.30664,220.83432 L 545.04492,233.6312 L 541.9043,233.6312 L 542.11523,232.2601 C 541.7871,232.86948 541.41991,233.31479 541.01367,233.59604 C 540.61523,233.87729 540.14257,234.01791 539.5957,234.01791 C 539.07226,234.01791 538.60742,233.90073 538.20117,233.66635 C 537.79492,233.43979 537.42773,233.08432 537.09961,232.59995 L 536.04492,238.76401 L 532.69336,238.76401 L 535.83398,220.83432"
+       id="text6117" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 607.875,197.70117 C 607.74217,199.66211 606.98436,201.22071 605.60156,202.37695 C 604.22655,203.5332 602.42968,204.11133 600.21094,204.11133 C 597.65624,204.11133 595.66796,203.31445 594.24609,201.7207 C 592.83203,200.12696 592.125,197.89258 592.125,195.01758 C 592.125,192.08009 592.84765,189.83009 594.29297,188.26758 C 595.73828,186.7051 597.8164,185.92385 600.52734,185.92383 C 602.73046,185.92385 604.46874,186.46291 605.74219,187.54102 C 607.02342,188.61134 607.72655,190.12697 607.85156,192.08789 L 604.34766,192.08789 C 604.19921,191.11134 603.80077,190.36915 603.15234,189.86133 C 602.50389,189.34572 601.6289,189.08791 600.52734,189.08789 C 598.96484,189.08791 597.77734,189.59181 596.96484,190.59961 C 596.15234,191.60743 595.74609,193.08009 595.74609,195.01758 C 595.74609,196.89258 596.14843,198.3418 596.95313,199.36523 C 597.76562,200.38868 598.91796,200.90039 600.41016,200.90039 C 601.48827,200.90039 602.37108,200.62696 603.05859,200.08008 C 603.74608,199.52539 604.19139,198.73243 604.39453,197.70117 L 607.875,197.70117 M 597.62109,208.76367 L 597.62109,207.25195 C 598.24609,207.41601 598.81249,207.54101 599.32031,207.62695 C 599.82812,207.71289 600.26171,207.75586 600.62109,207.75586 C 601.02733,207.75586 601.32421,207.68554 601.51172,207.54492 C 601.69921,207.41211 601.79296,207.19726 601.79297,206.90039 C 601.79296,206.60351 601.68358,206.39258 601.46484,206.26758 C 601.24608,206.14258 600.8828,206.08008 600.375,206.08008 C 600.1953,206.08008 600.05858,206.08008 599.96484,206.08008 C 599.87108,206.08789 599.78515,206.0957 599.70703,206.10352 L 599.70703,203.63086 L 600.90234,203.63086 L 600.90234,204.68555 L 601.07813,204.68555 C 601.99218,204.68555 602.67968,204.87305 603.14063,205.24805 C 603.60155,205.62304 603.83202,206.18164 603.83203,206.92383 C 603.83202,207.70507 603.57421,208.29101 603.05859,208.68164 C 602.54296,209.07226 601.76952,209.26757 600.73828,209.26758 C 600.33983,209.26757 599.87108,209.2246 599.33203,209.13867 C 598.80077,209.05273 598.23046,208.92773 597.62109,208.76367"
+       id="text6121" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 721.7168,216.36914 L 721.7168,219.82617 L 718.23633,219.82617 L 718.23633,216.36914 L 721.7168,216.36914 M 721.55273,221.39648 C 721.55273,221.47462 721.55663,221.5879 721.56445,221.73633 C 721.57226,221.88478 721.57616,221.99415 721.57617,222.06445 C 721.57616,222.74415 721.50194,223.31446 721.35352,223.77539 C 721.20507,224.23634 720.96679,224.66602 720.63867,225.06445 C 720.38085,225.36134 720.00195,225.70118 719.50195,226.08398 C 719.00976,226.4668 718.69335,226.74415 718.55273,226.91602 C 718.24804,227.25977 718.0332,227.57618 717.9082,227.86523 C 717.79101,228.1543 717.73242,228.4668 717.73242,228.80273 C 717.73242,229.55274 717.93554,230.13477 718.3418,230.54883 C 718.74804,230.95508 719.32226,231.15821 720.06445,231.1582 C 720.79882,231.15821 721.38085,230.91211 721.81055,230.41992 C 722.24023,229.91993 722.4746,229.22071 722.51367,228.32227 L 725.8418,228.32227 L 725.8418,228.68555 C 725.84178,230.3418 725.31835,231.66211 724.27148,232.64648 C 723.23241,233.62305 721.83007,234.11133 720.06445,234.11133 C 718.25976,234.11133 716.82226,233.64648 715.75195,232.7168 C 714.68945,231.7793 714.1582,230.53321 714.1582,228.97852 C 714.1582,228.40821 714.2168,227.90821 714.33398,227.47852 C 714.45117,227.04883 714.63086,226.65821 714.87305,226.30664 C 715.18554,225.86915 715.67773,225.39259 716.34961,224.87695 C 717.02148,224.36134 717.43554,224.03321 717.5918,223.89258 C 717.88867,223.60353 718.0996,223.29884 718.22461,222.97852 C 718.35742,222.6504 718.42382,222.25587 718.42383,221.79492 C 718.42382,221.75587 718.41992,221.69337 718.41211,221.60742 C 718.40429,221.51368 718.40039,221.44337 718.40039,221.39648 L 721.55273,221.39648"
+       id="text6131" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Matrix Unicode"
+       d=""
+       id="text6955" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="137.05411"
+       y="23.149496"
+       id="text4346"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348"
+         x="137.05411"
+         y="23.149496"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">		˝ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="186.05411"
+       y="27.3995"
+       id="text4346-3"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-1"
+         x="186.05411"
+         y="27.3995"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			¯ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="482.80411"
+       y="24.6495"
+       id="text4346-1"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-7"
+         x="482.80411"
+         y="24.6495"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			˛ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="558.30408"
+       y="24.399498"
+       id="text4346-6"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-0"
+         x="558.30408"
+         y="24.399498"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">		˘ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="626.55408"
+       y="11.1495"
+       id="text4346-0"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-09"
+         x="626.55408"
+         y="11.1495"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"><tspan
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:12.5px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start"
+           id="tspan4483"> 		o</tspan></tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="667.80408"
+       y="28.899498"
+       id="text4346-31"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-15"
+         x="667.80408"
+         y="28.899498"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			. </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="619.55408"
+       y="203.14951"
+       id="text4346-38"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-8"
+         x="619.55408"
+         y="203.14951"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			ˇ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="620.30408"
+       y="232.14951"
+       id="text4346-9"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-6"
+         x="620.30408"
+         y="232.14951"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			˙ </tspan></text>
+    <path
+       inkscape:connector-curvature="0"
+       style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:24px;line-height:125%;font-family:'Swis721 BT';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="m 402.88672,6.52148 2.95312,0 5.63672,6.574219 -2.7539,0 -4.34766,-4.3476565 -4.37109,4.3476565 -2.75391,0 5.63672,-6.574219"
+       id="text6091-3" />
+  </g>
+</svg>
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg.2016_08_18_09_06_36.0.svg b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg.2016_08_18_09_06_36.0.svg
new file mode 100644
index 0000000000..2304b2a4c3
--- /dev/null
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International-Alternative.svg.2016_08_18_09_06_36.0.svg
@@ -0,0 +1,1049 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="900"
+   height="300"
+   id="svg2"
+   sodipodi:version="0.32"
+   inkscape:version="0.91 r13725"
+   version="1.0"
+   sodipodi:docname="KB_US-International-Alternative.svg"
+   inkscape:output_extension="org.inkscape.output.svg.inkscape"
+   inkscape:export-filename="D:\Users\Felix\Source\Repos\qmk_firmware\keyboards\s60-x\keymaps\ansi_qwertz\docs\KB_US-International-Alternative.png"
+   inkscape:export-xdpi="79.910004"
+   inkscape:export-ydpi="79.910004">
+  <defs
+     id="defs4">
+    <marker
+       inkscape:stockid="Arrow1Lend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Lend"
+       style="overflow:visible;">
+      <path
+         id="path5387"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.8) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Lstart"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Lstart"
+       style="overflow:visible">
+      <path
+         id="path5390"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none"
+         transform="scale(0.8)" />
+    </marker>
+    <marker
+       inkscape:stockid="Tail"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Tail"
+       style="overflow:visible">
+      <g
+         id="g5342"
+         transform="scale(-1.2)">
+        <path
+           id="path5344"
+           d="M -3.8048674,-3.9585227 L 0.54352094,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5346"
+           d="M -1.2866832,-3.9585227 L 3.0617053,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5348"
+           d="M 1.3053582,-3.9585227 L 5.6537466,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5350"
+           d="M -3.8048674,4.1775838 L 0.54352094,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5352"
+           d="M -1.2866832,4.1775838 L 3.0617053,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5354"
+           d="M 1.3053582,4.1775838 L 5.6537466,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+      </g>
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Mend"
+       style="overflow:visible;">
+      <path
+         id="path5363"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(0.6) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Lend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Lend"
+       style="overflow:visible;">
+      <path
+         id="path5369"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(1.1) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Send"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Send"
+       style="overflow:visible;">
+      <path
+         id="path5375"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.2) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Send"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Send"
+       style="overflow:visible;">
+      <path
+         id="path5357"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(0.3) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Mend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Mend"
+       style="overflow:visible;">
+      <path
+         id="path5381"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.4) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Lstart"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Lstart"
+       style="overflow:visible">
+      <path
+         id="path5372"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(1.1) translate(-5,0)" />
+    </marker>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="1.4142136"
+     inkscape:cx="435.66801"
+     inkscape:cy="291.15819"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     inkscape:grid-points="true"
+     showgrid="true"
+     gridtolerance="15px"
+     showborder="false"
+     inkscape:window-width="1920"
+     inkscape:window-height="1017"
+     inkscape:window-x="1912"
+     inkscape:window-y="-8"
+     showguides="true"
+     inkscape:guide-bbox="true"
+     inkscape:grid-bbox="true"
+     inkscape:window-maximized="1">
+    <inkscape:grid
+       id="GridFromPre046Settings"
+       type="xygrid"
+       originx="0px"
+       originy="0px"
+       spacingx="7.5px"
+       spacingy="7.5px"
+       color="#0000ff"
+       empcolor="#0000ff"
+       opacity="0.12156863"
+       empopacity="0.25098039"
+       empspacing="4" />
+  </sodipodi:namedview>
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1">
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,0 L 60,0 L 60,60 L 0,60 L 0,0 z "
+       id="rect2186" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 60,0 L 120,0 L 120,60 L 60,60 L 60,0 z "
+       id="rect2218" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 120,0 L 180,0 L 180,60 L 120,60 L 120,0 z "
+       id="rect2222" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 180,0 L 240,0 L 240,60 L 180,60 L 180,0 z "
+       id="rect2228" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 240,0 L 300,0 L 300,60 L 240,60 L 240,0 z "
+       id="rect2230" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 300,0 L 360,0 L 360,60 L 300,60 L 300,0 z "
+       id="rect2232" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 360,0 L 420,0 L 420,60 L 360,60 L 360,0 z "
+       id="rect2234" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 420,0 L 480,0 L 480,60 L 420,60 L 420,0 z "
+       id="rect2236" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 480,0 L 540,0 L 540,60 L 480,60 L 480,0 z "
+       id="rect2238" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 540,0 L 600,0 L 600,60 L 540,60 L 540,0 z "
+       id="rect2240" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 600,0 L 660,0 L 660,60 L 600,60 L 600,0 z "
+       id="rect2242" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 660,0 L 720,0 L 720,60 L 660,60 L 660,0 z "
+       id="rect2244" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 720,0 L 780,0 L 780,60 L 720,60 L 720,0 z "
+       id="rect2246" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 780,0 L 900,0 L 900,60 L 780,60 L 780,0 z "
+       id="rect2248" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,60 L 90,60 L 90,120 L 0,120 L 0,60 z "
+       id="rect2250" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 90,60 L 150,60 L 150,120 L 90,120 L 90,60 z "
+       id="rect2252" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 150,60 L 210,60 L 210,120 L 150,120 L 150,60 z "
+       id="rect2254" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 210,60 L 270,60 L 270,120 L 210,120 L 210,60 z "
+       id="rect2256" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 270,60 L 330,60 L 330,120 L 270,120 L 270,60 z "
+       id="rect2258" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 330,60 L 390,60 L 390,120 L 330,120 L 330,60 z "
+       id="rect2262" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 390,60 L 450,60 L 450,120 L 390,120 L 390,60 z "
+       id="rect2264" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 450,60 L 510,60 L 510,120 L 450,120 L 450,60 z "
+       id="rect2266" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 510,60 L 570,60 L 570,120 L 510,120 L 510,60 z "
+       id="rect2270" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 570,60 L 630,60 L 630,120 L 570,120 L 570,60 z "
+       id="rect2272" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 630,60 L 690,60 L 690,120 L 630,120 L 630,60 z "
+       id="rect2274" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 690,60 L 750,60 L 750,120 L 690,120 L 690,60 z "
+       id="rect2278" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 750,60 L 810,60 L 810,120 L 750,120 L 750,60 z "
+       id="rect2280" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 810,60 L 900,60 L 900,120 L 810,120 L 810,60 z "
+       id="rect2284" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,120 L 105,120 L 105,180 L 0,180 L 0,120 z "
+       id="rect2286" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 105,120 L 165,120 L 165,180 L 105,180 L 105,120 z "
+       id="rect2292" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 165,120 L 225,120 L 225,180 L 165,180 L 165,120 z "
+       id="rect2296" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 225,120 L 285,120 L 285,180 L 225,180 L 225,120 z "
+       id="rect2298" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 285,120 L 345,120 L 345,180 L 285,180 L 285,120 z "
+       id="rect2300" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 345,120 L 405,120 L 405,180 L 345,180 L 345,120 z "
+       id="rect2302" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 405,120 L 465,120 L 465,180 L 405,180 L 405,120 z "
+       id="rect2306" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 465,120 L 525,120 L 525,180 L 465,180 L 465,120 z "
+       id="rect2308" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 525,120 L 585,120 L 585,180 L 525,180 L 525,120 z "
+       id="rect2312" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 585,120 L 645,120 L 645,180 L 585,180 L 585,120 z "
+       id="rect2314" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 645,120 L 705,120 L 705,180 L 645,180 L 645,120 z "
+       id="rect2316" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 705,120 L 765,120 L 765,180 L 705,180 L 705,120 z "
+       id="rect2318" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 765,120 L 900,120 L 900,180 L 765,180 L 765,120 z "
+       id="rect2320" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,180 L 135,180 L 135,240 L 0,240 L 0,180 z "
+       id="rect2322" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 135,180 L 195,180 L 195,240 L 135,240 L 135,180 z "
+       id="rect2324" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 195,180 L 255,180 L 255,240 L 195,240 L 195,180 z "
+       id="rect2326" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 255,180 L 315,180 L 315,240 L 255,240 L 255,180 z "
+       id="rect2330" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 315,180 L 375,180 L 375,240 L 315,240 L 315,180 z "
+       id="rect2334" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 375,180 L 435,180 L 435,240 L 375,240 L 375,180 z "
+       id="rect2336" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 435,180 L 495,180 L 495,240 L 435,240 L 435,180 z "
+       id="rect2338" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 495,180 L 555,180 L 555,240 L 495,240 L 495,180 z "
+       id="rect2340" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 555,180 L 615,180 L 615,240 L 555,240 L 555,180 z "
+       id="rect2342" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 615,180 L 675,180 L 675,240 L 615,240 L 615,180 z "
+       id="rect2344" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 675,180 L 735,180 L 735,240 L 675,240 L 675,180 z "
+       id="rect2346" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 735,180 L 900,180 L 900,240 L 735,240 L 735,180 z "
+       id="rect2348" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,240 L 90,240 L 90,300 L 0,300 L 0,240 z "
+       id="rect2350" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 810,240 L 900,240 L 900,300 L 810,300 L 810,240 z "
+       id="rect2352" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 150,240 L 240,240 L 240,300 L 150,300 L 150,240 z "
+       id="rect2354" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 600,240 L 690,240 L 690,300 L 600,300 L 600,240 z "
+       id="rect2360" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 240,240 L 600,240 L 600,300 L 240,300 L 240,240 z "
+       id="rect2362" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 90,240 L 150,240 L 150,300 L 90,300 L 90,240 z "
+       id="rect2364" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 690,240 L 750,240 L 750,300 L 690,300 L 690,240 z "
+       id="rect2366" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 750,240 L 810,240 L 810,300 L 750,300 L 750,240 z "
+       id="rect2368" />
+    <path
+       style=""
+       d=""
+       id="flowRoot4146" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 75.351563,18.826172 L 74.4375,11.056641 L 74.4375,6.3691406 L 78.046875,6.3691406 L 78.046875,11.056641 L 77.132813,18.826172 L 75.351563,18.826172 M 74.484375,23.630859 L 74.484375,20.173828 L 77.964844,20.173828 L 77.964844,23.630859 L 74.484375,23.630859 M 75.351563,53.630859 L 75.351563,42.158203 L 71.34375,42.158203 L 71.34375,39.802734 L 71.601563,39.802734 C 73.062496,39.802748 74.124995,39.576186 74.789063,39.123047 C 75.460931,38.669937 75.855462,37.912125 75.972656,36.849609 L 78.65625,36.849609 L 78.65625,53.630859 L 75.351563,53.630859"
+       id="text5091" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 23.34375,14.220703 L 23.34375,16.810547 C 22.531233,17.365241 21.761702,17.775396 21.035156,18.041016 C 20.316391,18.298833 19.605455,18.42774 18.902344,18.427734 C 18.542956,18.42774 18.183581,18.39649 17.824219,18.333984 C 17.464832,18.27149 17.105457,18.181646 16.746094,18.064453 C 16.558583,18.001959 16.281239,17.904303 15.914063,17.771484 C 14.203116,17.185553 12.902336,16.892585 12.011719,16.892578 C 11.34765,16.892585 10.652339,17.041022 9.9257813,17.337891 C 9.2070275,17.626959 8.3984345,18.091802 7.5,18.732422 L 7.5,16.142578 C 8.3359346,15.580086 9.1328088,15.162118 9.890625,14.888672 C 10.648432,14.607431 11.363275,14.466806 12.035156,14.466797 C 12.949211,14.466806 14.085929,14.693368 15.445313,15.146484 C 15.46874,15.154305 15.484365,15.158212 15.492188,15.158203 C 15.632802,15.205087 15.847646,15.279305 16.136719,15.380859 C 17.347644,15.810555 18.285143,16.025398 18.949219,16.025391 C 19.613267,16.025398 20.29686,15.880867 21,15.591797 C 21.703109,15.302743 22.484358,14.845712 23.34375,14.220703 M 11.988281,35.033203 L 15.011719,35.033203 L 17.320313,39.369141 L 15.65625,39.369141 L 11.988281,35.033203"
+       id="text5103" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 136.47578,20.443359 C 136.04608,21.099612 135.54999,21.583986 134.9875,21.896484 C 134.42499,22.201173 133.76093,22.353517 132.99532,22.353516 C 131.76093,22.353517 130.81953,22.01758 130.1711,21.345703 C 129.53047,20.673831 129.21015,19.681645 129.21016,18.369141 C 129.21015,16.50196 129.75312,14.935556 130.83907,13.669922 C 131.93281,12.404308 133.27656,11.771496 134.87032,11.771484 C 135.4953,11.771496 136.03827,11.900402 136.49922,12.158203 C 136.96015,12.416027 137.33905,12.798839 137.63594,13.306641 L 138.25703,12.158203 L 140.34297,12.158203 L 138.62032,19.166016 C 138.59686,19.251958 138.57733,19.341801 138.56172,19.435547 C 138.54608,19.521488 138.53827,19.591801 138.53828,19.646484 C 138.53827,19.919926 138.63202,20.126957 138.81953,20.267578 C 139.00702,20.400394 139.28436,20.4668 139.65157,20.466797 C 139.95624,20.4668 140.27264,20.388675 140.60078,20.232422 C 140.9367,20.076175 141.2492,19.857426 141.53828,19.576172 C 142.21014,18.951177 142.71795,18.220709 143.06172,17.384766 C 143.41326,16.548835 143.58904,15.630867 143.58907,14.630859 C 143.58904,12.75587 142.86248,11.216809 141.40938,10.013672 C 139.96405,8.8027492 138.09686,8.1972811 135.80782,8.1972656 C 134.70624,8.1972811 133.6789,8.3300934 132.72578,8.5957031 C 131.78046,8.8613429 130.92109,9.2558737 130.14766,9.7792969 C 128.81953,10.669935 127.79609,11.783215 127.07735,13.119141 C 126.36641,14.455087 126.01094,15.91993 126.01094,17.513672 C 126.01094,19.912113 126.81953,21.83008 128.43672,23.267578 C 130.0539,24.697265 132.21406,25.412108 134.91719,25.412109 C 136.1828,25.412108 137.41718,25.220702 138.62032,24.837891 C 139.83124,24.455077 140.95623,23.90039 141.99532,23.173828 L 142.95625,24.544922 C 141.76092,25.443358 140.49139,26.119138 139.14766,26.572266 C 137.81171,27.025387 136.41718,27.25195 134.96407,27.251953 C 133.46405,27.25195 132.08515,27.060543 130.82735,26.677734 C 129.56953,26.302732 128.45234,25.744139 127.47578,25.001953 C 126.26484,24.05664 125.35859,22.966798 124.75703,21.732422 C 124.15547,20.49805 123.85469,19.099614 123.85469,17.537109 C 123.85469,16.232429 124.05781,14.990243 124.46407,13.810547 C 124.87813,12.623058 125.48359,11.544934 126.28047,10.576172 C 127.43672,9.1621238 128.82734,8.0918124 130.45235,7.3652344 C 132.07734,6.6386889 133.88593,6.275408 135.87813,6.2753906 C 137.19843,6.275408 138.43671,6.4550953 139.59297,6.8144531 C 140.75702,7.1660321 141.76873,7.6660316 142.62813,8.3144531 C 143.68279,9.1347801 144.46795,10.072279 144.9836,11.126953 C 145.50701,12.17384 145.76873,13.357432 145.76875,14.677734 C 145.76873,15.966805 145.51092,17.15821 144.99532,18.251953 C 144.48748,19.337895 143.75311,20.267581 142.79219,21.041016 C 142.2453,21.478518 141.64764,21.814455 140.99922,22.048828 C 140.35858,22.275392 139.69061,22.388673 138.99532,22.388672 C 138.16718,22.388673 137.54218,22.224611 137.12032,21.896484 C 136.70624,21.568361 136.4914,21.083987 136.47578,20.443359 M 137.06172,15.427734 C 136.96015,14.794931 136.73358,14.314462 136.38203,13.986328 C 136.03827,13.650401 135.58124,13.482432 135.01094,13.482422 C 134.1203,13.482432 133.34687,13.966807 132.69063,14.935547 C 132.03437,15.904305 131.70624,17.068366 131.70625,18.427734 C 131.70624,19.146489 131.86249,19.693363 132.175,20.068359 C 132.49531,20.443363 132.95624,20.630862 133.55782,20.630859 C 134.20624,20.630862 134.79608,20.384769 135.32735,19.892578 C 135.8664,19.400395 136.23358,18.75977 136.42891,17.970703 L 137.06172,15.427734 M 128.56563,53.630859 C 128.58125,52.130861 128.90156,50.861331 129.52657,49.822266 C 130.15156,48.775395 131.26094,47.716803 132.85469,46.646484 C 133.09687,46.482429 133.44844,46.255867 133.90938,45.966797 C 136.01875,44.615243 137.07343,43.314463 137.07344,42.064453 C 137.07343,41.322278 136.85078,40.736341 136.40547,40.306641 C 135.96015,39.876967 135.35078,39.662123 134.57735,39.662109 C 133.73359,39.662123 133.08125,39.927748 132.62032,40.458984 C 132.16719,40.982435 131.94062,41.732434 131.94063,42.708984 L 131.94063,42.849609 L 128.84688,42.849609 C 128.84688,40.927747 129.3625,39.44728 130.39375,38.408203 C 131.425,37.369157 132.89375,36.849626 134.8,36.849609 C 136.52656,36.849626 137.90546,37.322282 138.93672,38.267578 C 139.96796,39.205093 140.48358,40.455091 140.4836,42.017578 C 140.48358,43.134776 140.21405,44.103525 139.675,44.923828 C 139.13593,45.744149 138.09296,46.677741 136.5461,47.724609 C 136.21796,47.951178 135.76484,48.248052 135.18672,48.615234 C 133.71797,49.560551 132.88984,50.2793 132.70235,50.771484 L 140.31953,50.771484 L 140.31953,53.630859 L 128.56563,53.630859"
+       id="text5127" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 195.28125,13.693359 L 194.25,16.552734 L 197.19141,16.552734 L 198.19922,13.693359 L 195.28125,13.693359 M 195.28125,6.4746094 L 197.87109,6.4746094 L 196.16016,11.337891 L 198.99609,11.337891 L 200.73047,6.4746094 L 203.32031,6.4746094 L 201.58594,11.337891 L 204.90234,11.337891 L 204.03516,13.693359 L 200.75391,13.693359 L 199.76953,16.529297 L 203.16797,16.529297 L 202.33594,18.873047 L 198.92578,18.873047 L 197.19141,23.748047 L 194.60156,23.748047 L 196.33594,18.873047 L 193.47656,18.873047 L 191.73047,23.748047 L 189.15234,23.748047 L 190.86328,18.873047 L 187.5,18.873047 L 188.39063,16.529297 L 191.69531,16.529297 L 192.70313,13.693359 L 189.19922,13.693359 L 190.06641,11.337891 L 193.54688,11.337891 L 195.28125,6.4746094 M 190.07813,48.521484 L 193.30078,48.521484 C 193.30859,49.458989 193.53515,50.166019 193.98047,50.642578 C 194.42578,51.111331 195.08593,51.345705 195.96094,51.345703 C 196.80468,51.345705 197.45312,51.126956 197.90625,50.689453 C 198.36718,50.244144 198.59765,49.607426 198.59766,48.779297 C 198.59765,47.951178 198.32812,47.326178 197.78906,46.904297 C 197.2578,46.474617 196.46484,46.259773 195.41016,46.259766 C 195.35546,46.259773 195.26953,46.263679 195.15234,46.271484 C 195.04296,46.279304 194.96093,46.28321 194.90625,46.283203 L 194.90625,43.962891 L 195.26953,43.962891 C 196.23827,43.9629 196.95312,43.7754 197.41406,43.400391 C 197.8828,43.017589 198.11718,42.435558 198.11719,41.654297 C 198.11718,41.005872 197.91796,40.494154 197.51953,40.119141 C 197.1289,39.736342 196.59374,39.544936 195.91406,39.544922 C 195.17187,39.544936 194.59765,39.763686 194.19141,40.201172 C 193.78515,40.638685 193.58203,41.259778 193.58203,42.064453 L 193.58203,42.205078 L 190.41797,42.205078 C 190.45703,40.486341 190.96094,39.169936 191.92969,38.255859 C 192.90625,37.334001 194.28125,36.873064 196.05469,36.873047 C 197.73437,36.873064 199.0664,37.283219 200.05078,38.103516 C 201.03514,38.923843 201.52733,40.02931 201.52734,41.419922 C 201.52733,42.154308 201.35936,42.798839 201.02344,43.353516 C 200.68749,43.908213 200.18358,44.365244 199.51172,44.724609 C 200.37108,45.099618 201.01952,45.619149 201.45703,46.283203 C 201.90233,46.93946 202.12499,47.724615 202.125,48.638672 C 202.12499,50.318363 201.57421,51.650393 200.47266,52.634766 C 199.37108,53.619141 197.86718,54.111328 195.96094,54.111328 C 194.07812,54.111328 192.625,53.634766 191.60156,52.681641 C 190.58594,51.720705 190.07812,50.357425 190.07813,48.591797 L 190.07813,48.521484"
+       id="text5139" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 254.46094,21.451172 C 255.10155,21.365237 255.58984,21.134768 255.92578,20.759766 C 256.26171,20.384769 256.42968,19.884769 256.42969,19.259766 C 256.42968,18.705083 256.26952,18.248052 255.94922,17.888672 C 255.63671,17.52149 255.14062,17.236335 254.46094,17.033203 L 254.46094,21.451172 M 253.06641,13.435547 L 253.06641,9.4511719 C 252.45703,9.529311 251.99218,9.7402483 251.67188,10.083984 C 251.35156,10.419935 251.1914,10.87306 251.19141,11.443359 C 251.1914,11.919934 251.33984,12.318371 251.63672,12.638672 C 251.9414,12.958995 252.41796,13.22462 253.06641,13.435547 M 253.06641,26.267578 L 253.06641,24.017578 C 251.30078,23.908203 249.98047,23.396485 249.10547,22.482422 C 248.23047,21.568361 247.79297,20.24805 247.79297,18.521484 L 250.93359,18.521484 C 250.97265,19.365239 251.16796,20.033207 251.51953,20.525391 C 251.8789,21.009768 252.39453,21.318362 253.06641,21.451172 L 253.06641,16.599609 C 251.2539,16.138679 249.96484,15.537117 249.19922,14.794922 C 248.43359,14.052744 248.05078,13.03712 248.05078,11.748047 C 248.05078,10.318373 248.5039,9.1660301 249.41016,8.2910156 C 250.32422,7.4160318 251.54296,6.959001 253.06641,6.9199219 L 253.06641,5.4199219 L 254.46094,5.4199219 L 254.46094,6.9199219 C 255.98437,6.9980635 257.17186,7.4590005 258.02344,8.3027344 C 258.87499,9.1386864 259.34374,10.318373 259.42969,11.841797 L 256.24219,11.841797 C 256.18749,11.115247 256.01171,10.56056 255.71484,10.177734 C 255.42577,9.7871232 255.0078,9.5683734 254.46094,9.5214844 L 254.46094,13.787109 C 256.39062,14.388681 257.74999,15.07618 258.53906,15.849609 C 259.32811,16.623054 259.72264,17.642584 259.72266,18.908203 C 259.72264,20.400394 259.26171,21.591799 258.33984,22.482422 C 257.42577,23.373047 256.1328,23.892578 254.46094,24.041016 L 254.46094,26.267578 L 253.06641,26.267578 M 254.64844,47.419922 L 254.64844,40.236328 L 250.08984,47.419922 L 254.64844,47.419922 M 254.57813,53.630859 L 254.57813,50.009766 L 247.5,50.009766 L 247.5,47.056641 L 253.6875,37.330078 L 257.84766,37.330078 L 257.84766,47.337891 L 259.79297,47.337891 L 259.79297,50.009766 L 257.84766,50.009766 L 257.84766,53.630859 L 254.57813,53.630859"
+       id="text5145" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 320.42578,19.740234 C 320.42577,20.263675 320.60155,20.705081 320.95313,21.064453 C 321.30467,21.416018 321.73827,21.591799 322.25391,21.591797 C 322.75389,21.591799 323.18358,21.412112 323.54297,21.052734 C 323.90233,20.68555 324.08201,20.24805 324.08203,19.740234 C 324.08201,19.240239 323.90233,18.814458 323.54297,18.462891 C 323.19139,18.103521 322.7617,17.923834 322.25391,17.923828 C 321.73827,17.923834 321.30467,18.099615 320.95313,18.451172 C 320.60155,18.794927 320.42577,19.224614 320.42578,19.740234 M 317.88281,19.740234 C 317.8828,18.521489 318.30468,17.494147 319.14844,16.658203 C 319.99217,15.822273 321.02733,15.404305 322.25391,15.404297 C 323.45701,15.404305 324.48045,15.830086 325.32422,16.681641 C 326.17576,17.525397 326.60154,18.544927 326.60156,19.740234 C 326.60154,20.943362 326.17576,21.974611 325.32422,22.833984 C 324.47264,23.685547 323.4492,24.111328 322.25391,24.111328 C 321.02733,24.111328 319.99217,23.689453 319.14844,22.845703 C 318.30468,22.001955 317.8828,20.9668 317.88281,19.740234 M 311.07422,24.111328 L 321.08203,6.8496094 L 322.96875,6.8496094 L 312.96094,24.111328 L 311.07422,24.111328 M 310.04297,11.220703 C 310.04297,11.73634 310.21484,12.169933 310.55859,12.521484 C 310.91015,12.873058 311.34375,13.048839 311.85938,13.048828 C 312.36718,13.048839 312.79687,12.873058 313.14844,12.521484 C 313.50781,12.162121 313.68749,11.728528 313.6875,11.220703 C 313.68749,10.720716 313.50781,10.294935 313.14844,9.9433594 C 312.79687,9.5839984 312.36718,9.4043111 311.85938,9.4042969 C 311.34375,9.4043111 310.91015,9.5800922 310.55859,9.9316406 C 310.21484,10.275404 310.04297,10.705091 310.04297,11.220703 M 307.5,11.220703 C 307.5,10.001967 307.92187,8.9707178 308.76563,8.1269531 C 309.60937,7.275407 310.64062,6.8496262 311.85938,6.8496094 C 313.06249,6.8496262 314.08593,7.2793132 314.92969,8.1386719 C 315.78124,8.990249 316.20702,10.017592 316.20703,11.220703 C 316.20702,12.423839 315.78124,13.451182 314.92969,14.302734 C 314.08593,15.146493 313.06249,15.568367 311.85938,15.568359 C 310.63281,15.568367 309.59765,15.150399 308.75391,14.314453 C 307.91797,13.478526 307.5,12.447277 307.5,11.220703 M 310.85156,49.119141 L 314.13281,49.119141 C 314.1875,49.853519 314.43359,50.423831 314.87109,50.830078 C 315.30859,51.228518 315.89453,51.427737 316.62891,51.427734 C 317.53515,51.427737 318.22655,51.162112 318.70313,50.630859 C 319.18749,50.099613 319.42968,49.337895 319.42969,48.345703 C 319.42968,47.416022 319.18358,46.685554 318.69141,46.154297 C 318.19921,45.615242 317.51952,45.345711 316.65234,45.345703 C 316.16796,45.345711 315.74218,45.443368 315.375,45.638672 C 315.00781,45.833992 314.69531,46.123054 314.4375,46.505859 L 311.41406,46.330078 L 312.50391,37.330078 L 322.14844,37.330078 L 322.14844,40.166016 L 314.87109,40.166016 L 314.4375,43.529297 C 314.80468,43.240245 315.22656,43.025401 315.70313,42.884766 C 316.17968,42.736339 316.71093,42.66212 317.29688,42.662109 C 318.96874,42.66212 320.3164,43.169932 321.33984,44.185547 C 322.37108,45.20118 322.88671,46.53321 322.88672,48.181641 C 322.88671,49.986332 322.3203,51.427737 321.1875,52.505859 C 320.05468,53.576172 318.53515,54.111328 316.62891,54.111328 C 314.89453,54.111328 313.51172,53.669922 312.48047,52.787109 C 311.45703,51.896486 310.91406,50.673831 310.85156,49.119141"
+       id="text5151" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 372.15234,48.298828 C 372.15234,49.25977 372.39062,50.021488 372.86719,50.583984 C 373.35156,51.146487 374.00781,51.427737 374.83594,51.427734 C 375.60937,51.427737 376.21484,51.154299 376.65234,50.607422 C 377.08983,50.06055 377.30858,49.298832 377.30859,48.322266 C 377.30858,47.423834 377.08202,46.724616 376.62891,46.224609 C 376.17577,45.724617 375.53905,45.474618 374.71875,45.474609 C 373.91406,45.474618 373.28515,45.724617 372.83203,46.224609 C 372.3789,46.724616 372.15234,47.416022 372.15234,48.298828 M 372.10547,43.916016 C 372.48828,43.525401 372.94921,43.232432 373.48828,43.037109 C 374.02734,42.833995 374.6289,42.732433 375.29297,42.732422 C 376.93358,42.732433 378.24608,43.232432 379.23047,44.232422 C 380.22264,45.23243 380.71874,46.56446 380.71875,48.228516 C 380.71874,49.994144 380.17968,51.419924 379.10156,52.505859 C 378.02343,53.591797 376.60155,54.134765 374.83594,54.134766 C 372.79687,54.134765 371.24609,53.431641 370.18359,52.025391 C 369.1289,50.619144 368.60156,48.560552 368.60156,45.849609 C 368.60156,42.935558 369.16797,40.708997 370.30078,39.169922 C 371.43359,37.623063 373.0664,36.849626 375.19922,36.849609 C 376.68358,36.849626 377.8789,37.236345 378.78516,38.009766 C 379.69921,38.783218 380.19921,39.830092 380.28516,41.150391 L 376.88672,41.150391 C 376.80858,40.611341 376.59765,40.205092 376.25391,39.931641 C 375.91015,39.658217 375.42968,39.521498 374.8125,39.521484 C 373.96874,39.521498 373.32031,39.888686 372.86719,40.623047 C 372.41406,41.349622 372.16015,42.447277 372.10547,43.916016"
+       id="text5157" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 432.85547,16.095703 L 431.96484,16.740234 C 431.60546,16.990241 431.33593,17.291022 431.15625,17.642578 C 430.97656,17.994146 430.88671,18.388677 430.88672,18.826172 C 430.88671,19.490239 431.11328,20.048832 431.56641,20.501953 C 432.01953,20.955081 432.58593,21.181643 433.26563,21.181641 C 433.76562,21.181643 434.24218,21.080081 434.69531,20.876953 C 435.15624,20.666019 435.58202,20.361331 435.97266,19.962891 L 432.85547,16.095703 M 433.79297,12.404297 L 434.20313,12.111328 C 434.57812,11.853527 434.85546,11.564465 435.03516,11.244141 C 435.21483,10.923841 435.30468,10.556654 435.30469,10.142578 C 435.30468,9.7441545 435.17968,9.4277486 434.92969,9.1933594 C 434.68749,8.958999 434.35546,8.8418117 433.93359,8.8417969 C 433.5039,8.8418117 433.16406,8.9629053 432.91406,9.2050781 C 432.66406,9.4394673 432.53906,9.7597795 432.53906,10.166016 C 432.53906,10.384779 432.59765,10.62306 432.71484,10.880859 C 432.83984,11.138684 433.01562,11.412122 433.24219,11.701172 L 433.79297,12.404297 M 431.15625,13.962891 L 430.47656,13.072266 C 430.125,12.603527 429.87109,12.166027 429.71484,11.759766 C 429.5664,11.345715 429.49218,10.912122 429.49219,10.458984 C 429.49218,9.2089988 429.89062,8.2168123 430.6875,7.4824219 C 431.49218,6.7402513 432.58203,6.3691579 433.95703,6.3691406 C 435.27733,6.3691579 436.3203,6.7090013 437.08594,7.3886719 C 437.85155,8.0683749 438.23436,8.9863428 438.23438,10.142578 C 438.23436,11.017591 438.0078,11.802746 437.55469,12.498047 C 437.10936,13.185557 436.40624,13.833994 435.44531,14.443359 L 437.91797,17.490234 C 438.15233,17.107428 438.33593,16.677741 438.46875,16.201172 C 438.60936,15.724617 438.70702,15.193368 438.76172,14.607422 L 441.80859,14.607422 C 441.72264,15.623055 441.5117,16.56446 441.17578,17.431641 C 440.83983,18.298833 440.37889,19.091801 439.79297,19.810547 L 442.93359,23.630859 L 438.94922,23.630859 L 437.77734,22.189453 C 437.08983,22.822266 436.33202,23.302735 435.50391,23.630859 C 434.68359,23.951172 433.82421,24.111328 432.92578,24.111328 C 431.33203,24.111328 430.02734,23.638672 429.01172,22.693359 C 428.0039,21.748049 427.5,20.541019 427.5,19.072266 C 427.5,17.978521 427.78125,17.037116 428.34375,16.248047 C 428.90625,15.458993 429.84375,14.697275 431.15625,13.962891 M 434.66016,53.630859 L 431.15625,53.630859 C 431.28125,51.341799 431.83203,49.07227 432.80859,46.822266 C 433.79296,44.572275 435.19531,42.361339 437.01563,40.189453 L 428.76563,40.189453 L 428.76563,37.330078 L 440.66016,37.330078 L 440.66016,39.849609 C 438.8164,41.880871 437.39843,44.029306 436.40625,46.294922 C 435.42187,48.560552 434.83984,51.005862 434.66016,53.630859"
+       id="text5163" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 493.5,13.212891 L 491.4375,16.119141 L 489.44531,14.724609 L 491.69531,11.900391 L 488.41406,10.986328 L 489.17578,8.6074219 L 492.32813,9.7324219 L 492.32813,6.3691406 L 494.64844,6.3691406 L 494.64844,9.7324219 L 497.80078,8.6308594 L 498.58594,11.009766 L 495.30469,11.900391 L 497.53125,14.701172 L 495.49219,16.166016 L 493.5,13.212891 M 490.875,48.755859 C 490.875,49.576176 491.10156,50.208988 491.55469,50.654297 C 492.01562,51.099612 492.67187,51.322268 493.52344,51.322266 C 494.33593,51.322268 494.97265,51.095706 495.43359,50.642578 C 495.90233,50.189457 496.13671,49.560551 496.13672,48.755859 C 496.13671,47.982428 495.89843,47.361334 495.42188,46.892578 C 494.9453,46.423835 494.31249,46.189461 493.52344,46.189453 C 492.73437,46.189461 492.09374,46.427742 491.60156,46.904297 C 491.11718,47.380866 490.875,47.998053 490.875,48.755859 M 491.14453,41.560547 C 491.14453,42.208996 491.34765,42.708995 491.75391,43.060547 C 492.16015,43.404307 492.74218,43.576182 493.5,43.576172 C 494.2578,43.576182 494.83984,43.400401 495.24609,43.048828 C 495.66015,42.697277 495.86718,42.201183 495.86719,41.560547 C 495.86718,40.93556 495.65624,40.443373 495.23438,40.083984 C 494.81249,39.724623 494.23437,39.544936 493.5,39.544922 C 492.78124,39.544936 492.20703,39.72853 491.77734,40.095703 C 491.35546,40.462904 491.14453,40.951185 491.14453,41.560547 M 489.9375,44.818359 C 489.23437,44.427744 488.72656,43.970713 488.41406,43.447266 C 488.10156,42.923839 487.94531,42.255871 487.94531,41.443359 C 487.94531,40.005873 488.4375,38.876968 489.42188,38.056641 C 490.40625,37.236345 491.76562,36.826189 493.5,36.826172 C 495.24999,36.826189 496.61718,37.236345 497.60156,38.056641 C 498.59374,38.869155 499.08983,39.998061 499.08984,41.443359 C 499.08983,42.216808 498.92186,42.888683 498.58594,43.458984 C 498.24999,44.021494 497.74608,44.474619 497.07422,44.818359 C 497.89452,45.20118 498.51171,45.73243 498.92578,46.412109 C 499.33983,47.083991 499.54686,47.904303 499.54688,48.873047 C 499.54686,50.505862 499.0078,51.787111 497.92969,52.716797 C 496.85936,53.646484 495.3828,54.111328 493.5,54.111328 C 491.59375,54.111328 490.11328,53.650391 489.05859,52.728516 C 488.0039,51.806642 487.47656,50.521487 487.47656,48.873047 C 487.47656,47.912115 487.67187,47.107428 488.0625,46.458984 C 488.46094,45.802742 489.08594,45.255868 489.9375,44.818359"
+       id="text5169" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 557.85938,6.3691406 C 556.78124,8.1347811 555.98046,9.9316543 555.45703,11.759766 C 554.93359,13.587901 554.67187,15.505868 554.67188,17.513672 C 554.67187,19.513676 554.93359,21.427737 555.45703,23.255859 C 555.98046,25.083983 556.78124,26.880856 557.85938,28.646484 L 555.38672,28.646484 C 554.01953,26.779294 552.98046,24.904296 552.26953,23.021484 C 551.5664,21.130862 551.21484,19.294926 551.21484,17.513672 C 551.21484,15.73243 551.5664,13.896494 552.26953,12.005859 C 552.98046,10.115248 554.01953,8.2363435 555.38672,6.3691406 L 557.85938,6.3691406 M 556.06641,42.685547 C 556.0664,41.724621 555.82421,40.96681 555.33984,40.412109 C 554.86327,39.849623 554.21093,39.568373 553.38281,39.568359 C 552.60156,39.568373 551.99218,39.837904 551.55469,40.376953 C 551.125,40.916028 550.91015,41.669934 550.91016,42.638672 C 550.91015,43.544932 551.13671,44.251963 551.58984,44.759766 C 552.04296,45.267586 552.67968,45.521492 553.5,45.521484 C 554.30468,45.521492 554.93359,45.271493 555.38672,44.771484 C 555.83983,44.271494 556.0664,43.576182 556.06641,42.685547 M 556.125,47.056641 C 555.73437,47.447272 555.27343,47.74024 554.74219,47.935547 C 554.21093,48.130865 553.61327,48.228521 552.94922,48.228516 C 551.30078,48.228521 549.98047,47.732428 548.98828,46.740234 C 547.99609,45.748055 547.5,44.419931 547.5,42.755859 C 547.5,40.990247 548.03906,39.564467 549.11719,38.478516 C 550.19531,37.392594 551.61718,36.849626 553.38281,36.849609 C 555.42968,36.849626 556.98436,37.556657 558.04688,38.970703 C 559.11718,40.376966 559.65233,42.431652 559.65234,45.134766 C 559.65233,48.041021 559.08202,50.267581 557.94141,51.814453 C 556.80077,53.361328 555.16015,54.134765 553.01953,54.134766 C 551.54296,54.134765 550.35156,53.751953 549.44531,52.986328 C 548.53906,52.212892 548.04297,51.162112 547.95703,49.833984 L 551.34375,49.845703 C 551.42187,50.384769 551.63281,50.787112 551.97656,51.052734 C 552.32031,51.318362 552.80468,51.451174 553.42969,51.451172 C 554.27343,51.451174 554.91796,51.083987 555.36328,50.349609 C 555.80858,49.615238 556.06249,48.517583 556.125,47.056641"
+       id="text5175" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 609.375,6.3691406 L 611.87109,6.3691406 C 613.23046,8.228531 614.26171,10.103529 614.96484,11.994141 C 615.66796,13.876963 616.01952,15.716805 616.01953,17.513672 C 616.01952,19.302739 615.66796,21.142581 614.96484,23.033203 C 614.26171,24.923827 613.23046,26.794919 611.87109,28.646484 L 609.375,28.646484 C 610.46094,26.873044 611.26562,25.072264 611.78906,23.244141 C 612.32031,21.408205 612.58593,19.498051 612.58594,17.513672 C 612.58593,15.521492 612.32031,13.611338 611.78906,11.783203 C 611.26562,9.9550918 610.46094,8.1504061 609.375,6.3691406 M 610.98047,45.474609 C 610.98046,47.513678 611.18359,48.994145 611.58984,49.916016 C 612.0039,50.837893 612.66015,51.29883 613.55859,51.298828 C 614.45702,51.29883 615.11327,50.833987 615.52734,49.904297 C 615.9414,48.974614 616.14843,47.498053 616.14844,45.474609 C 616.14843,43.44337 615.9414,41.966809 615.52734,41.044922 C 615.11327,40.12306 614.45702,39.662123 613.55859,39.662109 C 612.66015,39.662123 612.0039,40.12306 611.58984,41.044922 C 611.18359,41.958996 610.98046,43.435557 610.98047,45.474609 M 607.5,45.474609 C 607.5,42.591808 608,40.43556 609,39.005859 C 610.00781,37.568375 611.52734,36.849626 613.55859,36.849609 C 615.58202,36.849626 617.09765,37.572282 618.10547,39.017578 C 619.12108,40.455091 619.62889,42.615245 619.62891,45.498047 C 619.62889,48.380865 619.12499,50.533206 618.11719,51.955078 C 617.11718,53.376953 615.59765,54.08789 613.55859,54.087891 C 611.52734,54.08789 610.00781,53.373047 609,51.943359 C 608,50.513675 607.5,48.357427 607.5,45.474609"
+       id="text5181" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 667.5,26.900391 L 679.5,26.900391 L 679.5,29.291016 L 667.5,29.291016 L 667.5,26.900391 M 670.20703,48.849609 L 670.20703,45.638672 L 676.79297,45.638672 L 676.79297,48.849609 L 670.20703,48.849609"
+       id="text5187" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 733.33594,9.3222656 L 735.70313,9.3222656 L 735.70313,15.298828 L 741.53906,15.298828 L 741.53906,17.630859 L 735.70313,17.630859 L 735.70313,23.630859 L 733.33594,23.630859 L 733.33594,17.630859 L 727.5,17.630859 L 727.5,15.298828 L 733.33594,15.298828 L 733.33594,9.3222656 M 727.5,47.818359 L 741.53906,47.818359 L 741.53906,50.150391 L 727.5,50.150391 L 727.5,47.818359 M 727.5,42.779297 L 741.53906,42.779297 L 741.53906,45.111328 L 727.5,45.111328 L 727.5,42.779297"
+       id="text5201" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 11.070313,95.601563 L 11.070313,86.148438 L 7.65625,86.148438 L 7.65625,84.09375 L 16.828125,84.09375 L 16.828125,86.148438 L 13.4375,86.148438 L 13.4375,95.601563 L 11.070313,95.601563 M 22.859375,94.546875 C 22.572911,94.989584 22.197911,95.328125 21.734375,95.5625 C 21.270829,95.791666 20.731767,95.90625 20.117188,95.90625 C 19.294269,95.90625 18.658853,95.671875 18.210938,95.203125 C 17.768228,94.734376 17.546874,94.06771 17.546875,93.203125 C 17.546874,92.401045 17.768228,91.789066 18.210938,91.367188 C 18.658853,90.945317 19.395831,90.656255 20.421875,90.5 C 20.656246,90.463547 20.963538,90.42188 21.34375,90.375 C 22.307286,90.250005 22.789057,89.97136 22.789063,89.539063 C 22.789057,89.195319 22.682286,88.950527 22.46875,88.804688 C 22.255203,88.653653 21.898433,88.578132 21.398438,88.578125 C 20.9401,88.578132 20.588538,88.669278 20.34375,88.851563 C 20.098955,89.033861 19.97656,89.294277 19.976563,89.632813 L 19.976563,89.757813 L 17.851563,89.757813 L 17.851563,89.601563 C 17.851562,88.731778 18.158853,88.049487 18.773438,87.554688 C 19.388018,87.054696 20.236976,86.804696 21.320313,86.804688 C 22.507807,86.804696 23.41666,87.010425 24.046875,87.421875 C 24.682284,87.833341 24.999992,88.427091 25,89.203125 L 25,94.03125 C 24.999992,94.385418 25.03645,94.651043 25.109375,94.828125 C 25.182283,95.000001 25.304679,95.130209 25.476563,95.21875 L 25.476563,95.601563 L 23.109375,95.601563 C 23.031244,95.455729 22.971348,95.294271 22.929688,95.117188 C 22.888015,94.940105 22.864577,94.750001 22.859375,94.546875 M 22.820313,91.421875 C 22.450515,91.593754 22.023432,91.731775 21.539063,91.835938 C 21.059892,91.940108 20.812496,91.994795 20.796875,92 C 20.39583,92.114587 20.11458,92.257816 19.953125,92.429688 C 19.796872,92.601566 19.718747,92.838544 19.71875,93.140625 C 19.718747,93.453127 19.82031,93.703127 20.023438,93.890625 C 20.226559,94.072918 20.499997,94.164064 20.84375,94.164063 C 21.458329,94.164064 21.940099,93.992189 22.289063,93.648438 C 22.643224,93.299481 22.820307,92.825524 22.820313,92.226563 L 22.820313,91.421875 M 27.039063,84.09375 L 29.25,84.09375 L 29.25,88.164063 C 29.531246,87.721362 29.882809,87.388029 30.304688,87.164063 C 30.731766,86.934905 31.216141,86.820321 31.757813,86.820313 C 32.783847,86.820321 33.622388,87.2448 34.273438,88.09375 C 34.92447,88.937507 35.249991,90.036464 35.25,91.390625 C 35.249991,92.734378 34.92447,93.820314 34.273438,94.648438 C 33.622388,95.476563 32.773431,95.890625 31.726563,95.890625 C 31.179682,95.890625 30.70312,95.776041 30.296875,95.546875 C 29.895829,95.317709 29.531246,94.953126 29.203125,94.453125 L 29.203125,95.601563 L 27.039063,95.601563 L 27.039063,84.09375 M 32.992188,91.296875 C 32.992181,90.51563 32.828118,89.903652 32.5,89.460938 C 32.171869,89.013027 31.721348,88.789069 31.148438,88.789063 C 30.544266,88.789069 30.075517,89.007819 29.742188,89.445313 C 29.414059,89.87761 29.249997,90.494797 29.25,91.296875 C 29.249997,92.161462 29.406247,92.817711 29.71875,93.265625 C 30.036454,93.713544 30.497391,93.937502 31.101563,93.9375 C 31.71614,93.937502 32.18489,93.713544 32.507813,93.265625 C 32.830722,92.812503 32.992181,92.156253 32.992188,91.296875"
+       id="text5427" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 789.76563,44.369141 L 792.57031,44.369141 C 793.23176,44.369143 793.71353,44.249351 794.01563,44.009766 C 794.3177,43.770185 794.46874,43.392581 794.46875,42.876953 C 794.46874,42.340499 794.3203,41.955083 794.02344,41.720703 C 793.72656,41.481125 793.23697,41.361333 792.55469,41.361328 L 789.76563,41.361328 L 789.76563,44.369141 M 789.76563,39.392578 L 792.46875,39.392578 C 793.05208,39.392585 793.47916,39.293627 793.75,39.095703 C 794.02083,38.892586 794.15624,38.574878 794.15625,38.142578 C 794.15624,37.720712 794.02343,37.416025 793.75781,37.228516 C 793.49739,37.035817 793.06249,36.939463 792.45313,36.939453 L 789.76563,36.939453 L 789.76563,39.392578 M 787.5,46.447266 L 787.5,34.939453 L 792.92188,34.939453 C 794.09895,34.939465 794.99478,35.189464 795.60938,35.689453 C 796.22916,36.184255 796.53905,36.905609 796.53906,37.853516 C 796.53905,38.436857 796.42447,38.923836 796.19531,39.314453 C 795.96614,39.705085 795.62239,40.007168 795.16406,40.220703 C 795.7578,40.460292 796.20051,40.806646 796.49219,41.259766 C 796.78905,41.707687 796.93749,42.267582 796.9375,42.939453 C 796.93749,44.059247 796.57291,44.92383 795.84375,45.533203 C 795.11457,46.142578 794.08072,46.447266 792.74219,46.447266 L 787.5,46.447266 M 803.45313,45.392578 C 803.16666,45.835287 802.79166,46.173828 802.32813,46.408203 C 801.86458,46.63737 801.32552,46.751953 800.71094,46.751953 C 799.88802,46.751953 799.2526,46.517578 798.80469,46.048828 C 798.36198,45.580079 798.14062,44.913413 798.14063,44.048828 C 798.14062,43.246748 798.36198,42.634769 798.80469,42.212891 C 799.2526,41.79102 799.98958,41.501958 801.01563,41.345703 C 801.25,41.30925 801.55729,41.267583 801.9375,41.220703 C 802.90104,41.095708 803.38281,40.817063 803.38281,40.384766 C 803.38281,40.041022 803.27604,39.796231 803.0625,39.650391 C 802.84895,39.499356 802.49218,39.423835 801.99219,39.423828 C 801.53385,39.423835 801.18229,39.514981 800.9375,39.697266 C 800.69271,39.879564 800.57031,40.13998 800.57031,40.478516 L 800.57031,40.603516 L 798.44531,40.603516 L 798.44531,40.447266 C 798.44531,39.577481 798.7526,38.89519 799.36719,38.400391 C 799.98177,37.900399 800.83073,37.650399 801.91406,37.650391 C 803.10156,37.650399 804.01041,37.856128 804.64063,38.267578 C 805.27603,38.679044 805.59374,39.272794 805.59375,40.048828 L 805.59375,44.876953 C 805.59374,45.231121 805.6302,45.496746 805.70313,45.673828 C 805.77603,45.845704 805.89843,45.975912 806.07031,46.064453 L 806.07031,46.447266 L 803.70313,46.447266 C 803.62499,46.301432 803.5651,46.139974 803.52344,45.962891 C 803.48176,45.785808 803.45833,45.595704 803.45313,45.392578 M 803.41406,42.267578 C 803.04427,42.439457 802.61718,42.577478 802.13281,42.681641 C 801.65364,42.785811 801.40625,42.840498 801.39063,42.845703 C 800.98958,42.96029 800.70833,43.103519 800.54688,43.275391 C 800.39062,43.447269 800.3125,43.684248 800.3125,43.986328 C 800.3125,44.29883 800.41406,44.54883 800.61719,44.736328 C 800.82031,44.918621 801.09375,45.009767 801.4375,45.009766 C 802.05208,45.009767 802.53385,44.837892 802.88281,44.494141 C 803.23697,44.145185 803.41406,43.671227 803.41406,43.072266 L 803.41406,42.267578 M 812.71875,43.244141 L 814.96094,43.244141 C 814.86718,44.322268 814.47395,45.173829 813.78125,45.798828 C 813.08854,46.423828 812.19791,46.736328 811.10938,46.736328 C 809.875,46.736328 808.90625,46.335287 808.20313,45.533203 C 807.50521,44.725913 807.15625,43.611331 807.15625,42.189453 C 807.15625,40.772792 807.51302,39.663418 808.22656,38.861328 C 808.94531,38.054045 809.93229,37.650399 811.1875,37.650391 C 812.28645,37.650399 813.16666,37.942066 813.82813,38.525391 C 814.49478,39.108731 814.86718,39.92123 814.94531,40.962891 L 812.6875,40.962891 C 812.62499,40.509772 812.46614,40.163418 812.21094,39.923828 C 811.95572,39.684252 811.61979,39.56446 811.20313,39.564453 C 810.64062,39.56446 810.21875,39.785814 809.9375,40.228516 C 809.66146,40.67123 809.52343,41.335292 809.52344,42.220703 C 809.52343,43.038415 809.66666,43.668623 809.95313,44.111328 C 810.24479,44.54883 810.66145,44.76758 811.20313,44.767578 C 811.62499,44.76758 811.96354,44.639976 812.21875,44.384766 C 812.47395,44.12956 812.64062,43.749352 812.71875,43.244141 M 816.44531,46.447266 L 816.44531,34.939453 L 818.65625,34.939453 L 818.65625,40.978516 L 821.35938,37.955078 L 824.09375,37.955078 L 821.13281,41.103516 L 824.27344,46.447266 L 821.54688,46.447266 L 819.51563,42.830078 L 818.65625,43.759766 L 818.65625,46.447266 L 816.44531,46.447266 M 824.79688,43.681641 L 827.0625,43.681641 C 827.08333,44.113935 827.23958,44.436851 827.53125,44.650391 C 827.82291,44.858726 828.26041,44.962892 828.84375,44.962891 C 829.28645,44.962892 829.6276,44.889976 829.86719,44.744141 C 830.11197,44.593101 830.23437,44.382164 830.23438,44.111328 C 830.23437,43.725914 829.78124,43.436852 828.875,43.244141 C 828.5052,43.166019 828.21093,43.098311 827.99219,43.041016 C 826.88802,42.759769 826.11979,42.426436 825.6875,42.041016 C 825.26042,41.655604 825.04687,41.134771 825.04688,40.478516 C 825.04687,39.608731 825.35937,38.921231 825.98438,38.416016 C 826.61458,37.905608 827.46614,37.650399 828.53906,37.650391 C 829.67447,37.650399 830.5651,37.903003 831.21094,38.408203 C 831.86197,38.913419 832.20833,39.624356 832.25,40.541016 L 830.03906,40.541016 C 830.02343,40.181647 829.88541,39.903001 829.625,39.705078 C 829.36979,39.507168 829.01302,39.40821 828.55469,39.408203 C 828.12239,39.40821 827.79948,39.473314 827.58594,39.603516 C 827.3776,39.733731 827.27343,39.929043 827.27344,40.189453 C 827.27343,40.528001 827.83854,40.82748 828.96875,41.087891 C 829.22916,41.145188 829.43489,41.192063 829.58594,41.228516 C 830.71614,41.494146 831.48697,41.814458 831.89844,42.189453 C 832.3151,42.564457 832.52343,43.093102 832.52344,43.775391 C 832.52343,44.738934 832.18228,45.473308 831.5,45.978516 C 830.82291,46.483724 829.83593,46.736328 828.53906,46.736328 C 827.36718,46.736328 826.45052,46.473307 825.78906,45.947266 C 825.1276,45.421225 824.79687,44.697267 824.79688,43.775391 L 824.79688,43.681641 M 840.02344,42.251953 C 840.02343,41.397792 839.86197,40.74675 839.53906,40.298828 C 839.21614,39.84571 838.74739,39.619147 838.13281,39.619141 C 837.52864,39.619147 837.0677,39.843106 836.75,40.291016 C 836.4375,40.738938 836.28125,41.392583 836.28125,42.251953 C 836.28125,43.05404 836.44531,43.673831 836.77344,44.111328 C 837.10677,44.54883 837.57552,44.76758 838.17969,44.767578 C 838.7526,44.76758 839.20312,44.543622 839.53125,44.095703 C 839.85937,43.647789 840.02343,43.033207 840.02344,42.251953 M 834.07031,49.853516 L 834.07031,37.955078 L 836.23438,37.955078 L 836.23438,39.103516 C 836.5625,38.603523 836.92708,38.23894 837.32813,38.009766 C 837.73437,37.780608 838.21093,37.666024 838.75781,37.666016 C 839.80468,37.666024 840.65364,38.080086 841.30469,38.908203 C 841.95572,39.731127 842.28124,40.814459 842.28125,42.158203 C 842.28124,43.517581 841.95572,44.621747 841.30469,45.470703 C 840.65364,46.314453 839.8151,46.736328 838.78906,46.736328 C 838.24739,46.736328 837.76302,46.621745 837.33594,46.392578 C 836.91406,46.163412 836.5625,45.830079 836.28125,45.392578 L 836.28125,49.853516 L 834.07031,49.853516 M 848.70313,45.392578 C 848.41666,45.835287 848.04166,46.173828 847.57813,46.408203 C 847.11458,46.63737 846.57552,46.751953 845.96094,46.751953 C 845.13802,46.751953 844.5026,46.517578 844.05469,46.048828 C 843.61198,45.580079 843.39062,44.913413 843.39063,44.048828 C 843.39062,43.246748 843.61198,42.634769 844.05469,42.212891 C 844.5026,41.79102 845.23958,41.501958 846.26563,41.345703 C 846.5,41.30925 846.80729,41.267583 847.1875,41.220703 C 848.15104,41.095708 848.63281,40.817063 848.63281,40.384766 C 848.63281,40.041022 848.52604,39.796231 848.3125,39.650391 C 848.09895,39.499356 847.74218,39.423835 847.24219,39.423828 C 846.78385,39.423835 846.43229,39.514981 846.1875,39.697266 C 845.94271,39.879564 845.82031,40.13998 845.82031,40.478516 L 845.82031,40.603516 L 843.69531,40.603516 L 843.69531,40.447266 C 843.69531,39.577481 844.0026,38.89519 844.61719,38.400391 C 845.23177,37.900399 846.08073,37.650399 847.16406,37.650391 C 848.35156,37.650399 849.26041,37.856128 849.89063,38.267578 C 850.52603,38.679044 850.84374,39.272794 850.84375,40.048828 L 850.84375,44.876953 C 850.84374,45.231121 850.8802,45.496746 850.95313,45.673828 C 851.02603,45.845704 851.14843,45.975912 851.32031,46.064453 L 851.32031,46.447266 L 848.95313,46.447266 C 848.87499,46.301432 848.8151,46.139974 848.77344,45.962891 C 848.73176,45.785808 848.70833,45.595704 848.70313,45.392578 M 848.66406,42.267578 C 848.29427,42.439457 847.86718,42.577478 847.38281,42.681641 C 846.90364,42.785811 846.65625,42.840498 846.64063,42.845703 C 846.23958,42.96029 845.95833,43.103519 845.79688,43.275391 C 845.64062,43.447269 845.5625,43.684248 845.5625,43.986328 C 845.5625,44.29883 845.66406,44.54883 845.86719,44.736328 C 846.07031,44.918621 846.34375,45.009767 846.6875,45.009766 C 847.30208,45.009767 847.78385,44.837892 848.13281,44.494141 C 848.48697,44.145185 848.66406,43.671227 848.66406,43.072266 L 848.66406,42.267578 M 857.96875,43.244141 L 860.21094,43.244141 C 860.11718,44.322268 859.72395,45.173829 859.03125,45.798828 C 858.33854,46.423828 857.44791,46.736328 856.35938,46.736328 C 855.125,46.736328 854.15625,46.335287 853.45313,45.533203 C 852.75521,44.725913 852.40625,43.611331 852.40625,42.189453 C 852.40625,40.772792 852.76302,39.663418 853.47656,38.861328 C 854.19531,38.054045 855.18229,37.650399 856.4375,37.650391 C 857.53645,37.650399 858.41666,37.942066 859.07813,38.525391 C 859.74478,39.108731 860.11718,39.92123 860.19531,40.962891 L 857.9375,40.962891 C 857.87499,40.509772 857.71614,40.163418 857.46094,39.923828 C 857.20572,39.684252 856.86979,39.56446 856.45313,39.564453 C 855.89062,39.56446 855.46875,39.785814 855.1875,40.228516 C 854.91146,40.67123 854.77343,41.335292 854.77344,42.220703 C 854.77343,43.038415 854.91666,43.668623 855.20313,44.111328 C 855.49479,44.54883 855.91145,44.76758 856.45313,44.767578 C 856.87499,44.76758 857.21354,44.639976 857.46875,44.384766 C 857.72395,44.12956 857.89062,43.749352 857.96875,43.244141 M 866.88281,43.869141 L 869.14844,43.869141 C 868.91926,44.764976 868.45572,45.4681 867.75781,45.978516 C 867.0651,46.483724 866.21874,46.736328 865.21875,46.736328 C 863.98958,46.736328 863.01562,46.32487 862.29688,45.501953 C 861.57812,44.67383 861.21875,43.554039 861.21875,42.142578 C 861.21875,40.751959 861.57292,39.655606 862.28125,38.853516 C 862.98958,38.051441 863.95833,37.650399 865.1875,37.650391 C 866.48958,37.650399 867.49478,38.046232 868.20313,38.837891 C 868.91145,39.624356 869.26562,40.74675 869.26563,42.205078 C 869.26562,42.366541 869.26301,42.488936 869.25781,42.572266 C 869.2578,42.650394 869.2526,42.725915 869.24219,42.798828 L 863.57031,42.798828 C 863.60156,43.465498 863.76302,43.968101 864.05469,44.306641 C 864.35156,44.645184 864.77604,44.814455 865.32813,44.814453 C 865.71874,44.814455 866.03906,44.738934 866.28906,44.587891 C 866.53906,44.431643 866.73697,44.19206 866.88281,43.869141 M 863.57031,41.306641 L 866.91406,41.306641 C 866.89322,40.73373 866.73958,40.298834 866.45313,40.001953 C 866.17187,39.699877 865.76562,39.548835 865.23438,39.548828 C 864.73958,39.548835 864.34895,39.699877 864.0625,40.001953 C 863.78125,40.304043 863.61718,40.738938 863.57031,41.306641"
+       id="text5207" />
+    <path
+       style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1"
+       d="M 840,17.646484 L 797.02608,17.646484"
+       id="path5439" />
+    <path
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 802.5,25.146484 L 802.5,10.146484 L 787.5,17.646484 L 802.5,25.146484 z "
+       id="path5441" />
+    <g
+       id="g5459"
+       transform="translate(0,7.5)">
+      <path
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 82.50003,75 L 54.020182,75"
+         id="path5453" />
+      <path
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z "
+         id="path5455" />
+      <path
+         id="path5457"
+         d="M 45,67.5 C 45,82.5 45,82.5 45,82.5"
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+    </g>
+    <g
+       id="g5464"
+       transform="matrix(-1,9.581637e-17,-9.581637e-17,-1,127.5,172.5)">
+      <path
+         id="path5466"
+         d="M 82.50003,75 L 54.020182,75"
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+      <path
+         id="path5468"
+         d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z "
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+      <path
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 45,67.5 C 45,82.5 45,82.5 45,82.5"
+         id="path5470" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 107.0625,80.560547 L 105.23438,78.779297 L 107.17969,76.763672 L 109.05469,78.591797 C 109.30467,78.123052 109.49608,77.587897 109.62891,76.986328 C 109.7617,76.384773 109.82811,75.728524 109.82813,75.017578 C 109.82811,73.119151 109.40233,71.646496 108.55078,70.599609 C 107.69921,69.544936 106.5078,69.017593 104.97656,69.017578 C 103.46093,69.017593 102.28124,69.54103 101.4375,70.587891 C 100.59374,71.634778 100.17187,73.111339 100.17188,75.017578 C 100.17187,76.916022 100.59374,78.392583 101.4375,79.447266 C 102.28124,80.494144 103.46093,81.017581 104.97656,81.017578 C 105.36718,81.017581 105.73436,80.978518 106.07813,80.900391 C 106.42968,80.822268 106.7578,80.708987 107.0625,80.560547 M 109.55859,82.916016 C 108.97264,83.306641 108.28905,83.603516 107.50781,83.806641 C 106.73436,84.009765 105.89061,84.111328 104.97656,84.111328 C 102.39843,84.111328 100.34765,83.291016 98.824219,81.650391 C 97.308592,80.009769 96.55078,77.798834 96.550781,75.017578 C 96.55078,72.228527 97.308592,70.017592 98.824219,68.384766 C 100.34765,66.744158 102.39843,65.923846 104.97656,65.923828 C 107.55468,65.923846 109.60545,66.744158 111.12891,68.384766 C 112.66014,70.025404 113.42576,72.23634 113.42578,75.017578 C 113.42576,76.236336 113.26951,77.353522 112.95703,78.369141 C 112.64451,79.376957 112.18358,80.259769 111.57422,81.017578 L 113.44922,82.810547 L 111.52734,84.826172 L 109.55859,82.916016"
+       id="text5474" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 158.94141,83.630859 L 153.99609,66.369141 L 157.67578,66.369141 L 160.62891,78.544922 L 163.125,66.369141 L 166.91016,66.369141 L 169.40625,78.544922 L 172.35938,66.369141 L 176.00391,66.369141 L 171.07031,83.630859 L 167.68359,83.630859 L 165.01172,70.412109 L 162.32813,83.630859 L 158.94141,83.630859"
+       id="text5482" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 218.52539,83.630859 L 218.52539,66.369141 L 231.05273,66.369141 L 231.05273,69.369141 L 222.0293,69.369141 L 222.0293,73.048828 L 230.2793,73.048828 L 230.2793,76.001953 L 222.0293,76.001953 L 222.0293,80.443359 L 231.47461,80.443359 L 231.47461,83.630859 L 218.52539,83.630859"
+       id="text5492" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 281.4375,73.916016 L 285.60938,73.916016 C 286.51561,73.916025 287.17968,73.732432 287.60156,73.365234 C 288.03124,72.998058 288.24608,72.419933 288.24609,71.630859 C 288.24608,70.880872 288.03905,70.314466 287.625,69.931641 C 287.21093,69.54103 286.59374,69.345717 285.77344,69.345703 L 281.4375,69.345703 L 281.4375,73.916016 M 277.88672,83.630859 L 277.88672,66.369141 L 286.25391,66.369141 C 288.13671,66.369158 289.53124,66.771501 290.4375,67.576172 C 291.34373,68.380875 291.79686,69.611342 291.79688,71.267578 C 291.79686,72.322277 291.5742,73.201182 291.12891,73.904297 C 290.69139,74.607431 290.05858,75.087899 289.23047,75.345703 C 289.98045,75.611336 290.5117,76.017586 290.82422,76.564453 C 291.14452,77.111335 291.32811,77.962896 291.375,79.119141 L 291.44531,81.158203 C 291.4453,81.173831 291.4453,81.197268 291.44531,81.228516 C 291.46873,82.259767 291.69139,82.884766 292.11328,83.103516 L 292.11328,83.630859 L 288.22266,83.630859 C 288.09764,83.388672 287.99999,83.091797 287.92969,82.740234 C 287.86718,82.380861 287.82811,81.95508 287.8125,81.462891 L 287.76563,79.646484 C 287.72655,78.576177 287.52343,77.853521 287.15625,77.478516 C 286.79686,77.103522 286.14452,76.916022 285.19922,76.916016 L 281.4375,76.916016 L 281.4375,83.630859 L 277.88672,83.630859"
+       id="text5500" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 343.24219,83.630859 L 343.24219,69.451172 L 338.12109,69.451172 L 338.12109,66.369141 L 351.87891,66.369141 L 351.87891,69.451172 L 346.79297,69.451172 L 346.79297,83.630859 L 343.24219,83.630859"
+       id="text5504" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 407.06836,83.630859 L 403.51758,83.630859 L 403.51758,77.197266 L 397.24805,66.369141 L 401.5957,66.369141 L 405.28711,73.810547 L 408.69727,66.369141 L 412.75195,66.369141 L 407.06836,77.197266 L 407.06836,83.630859"
+       id="text5518" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 458.08594,66.105469 L 461.67188,66.105469 L 461.67188,76.933594 C 461.67187,78.269536 461.93749,79.246098 462.46875,79.863281 C 462.99999,80.472659 463.84374,80.777346 465,80.777344 C 466.17187,80.777346 467.02343,80.472659 467.55469,79.863281 C 468.09374,79.25391 468.36327,78.277349 468.36328,76.933594 L 468.36328,66.105469 L 471.91406,66.105469 L 471.91406,77.320313 C 471.91405,79.437504 471.3203,81.062502 470.13281,82.195313 C 468.95311,83.328125 467.24999,83.894531 465.02344,83.894531 C 462.78124,83.894531 461.0625,83.332031 459.86719,82.207031 C 458.67969,81.074221 458.08594,79.445316 458.08594,77.320313 L 458.08594,66.105469"
+       id="text5522" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 523.22461,83.630859 L 523.22461,66.369141 L 526.77539,66.369141 L 526.77539,83.630859 L 523.22461,83.630859"
+       id="text5526" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 580.18359,75 C 580.18359,76.898444 580.60546,78.375005 581.44922,79.429688 C 582.29296,80.476566 583.47265,81.000003 584.98828,81 C 586.51952,81.000003 587.71093,80.476566 588.5625,79.429688 C 589.41405,78.375005 589.83983,76.898444 589.83984,75 C 589.83983,73.101573 589.41405,71.628918 588.5625,70.582031 C 587.71093,69.527358 586.51952,69.000015 584.98828,69 C 583.47265,69.000015 582.29296,69.523452 581.44922,70.570313 C 580.60546,71.617199 580.18359,73.093761 580.18359,75 M 576.5625,75 C 576.5625,72.210949 577.32031,70.000014 578.83594,68.367188 C 580.35937,66.726579 582.41015,65.906268 584.98828,65.90625 C 587.56639,65.906268 589.61717,66.726579 591.14063,68.367188 C 592.67186,70.007826 593.43748,72.218761 593.4375,75 C 593.43748,77.781256 592.67186,79.992191 591.14063,81.632813 C 589.61717,83.273438 587.56639,84.09375 584.98828,84.09375 C 582.41015,84.09375 580.35937,83.273438 578.83594,81.632813 C 577.32031,79.992191 576.5625,77.781256 576.5625,75"
+       id="text5530" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 641.97656,74.361328 L 645.41016,74.361328 C 646.33983,74.361337 647.01561,74.166025 647.4375,73.775391 C 647.85936,73.376963 648.0703,72.740245 648.07031,71.865234 C 648.0703,71.044934 647.86327,70.423841 647.44922,70.001953 C 647.03515,69.580092 646.41796,69.369155 645.59766,69.369141 L 641.97656,69.369141 L 641.97656,74.361328 M 641.95313,77.490234 L 641.95313,83.630859 L 638.40234,83.630859 L 638.40234,66.369141 L 646.07813,66.369141 C 647.89061,66.369158 649.26171,66.841814 650.19141,67.787109 C 651.12889,68.724624 651.59764,70.103529 651.59766,71.923828 C 651.59764,73.705088 651.14061,75.080087 650.22656,76.048828 C 649.31249,77.009772 648.0078,77.490241 646.3125,77.490234 L 641.95313,77.490234"
+       id="text5534" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 709.24805,63.919922 L 709.24805,66.369141 C 709.17772,66.369155 709.08007,66.365249 708.95508,66.357422 C 708.83007,66.349624 708.74413,66.345718 708.69727,66.345703 C 707.90819,66.345718 707.37304,66.498062 707.0918,66.802734 C 706.81835,67.099624 706.68163,67.732435 706.68164,68.701172 L 706.68164,71.513672 C 706.68163,72.66993 706.50585,73.490242 706.1543,73.974609 C 705.80273,74.458991 705.16992,74.806647 704.25586,75.017578 C 705.16992,75.228522 705.80273,75.572271 706.1543,76.048828 C 706.50585,76.525395 706.68163,77.341801 706.68164,78.498047 L 706.68164,81.322266 C 706.68163,82.283202 706.81835,82.912108 707.0918,83.208984 C 707.36523,83.505857 707.90038,83.654294 708.69727,83.654297 C 708.74413,83.654294 708.83007,83.650388 708.95508,83.642578 C 709.08007,83.634763 709.17772,83.630857 709.24805,83.630859 L 709.24805,86.080078 C 709.13866,86.080073 708.98632,86.08398 708.79102,86.091797 C 708.59569,86.099605 708.45116,86.103511 708.35742,86.103516 C 707.57616,86.103511 706.92382,86.056636 706.40039,85.962891 C 705.87695,85.869136 705.43163,85.724605 705.06445,85.529297 C 704.61913,85.263668 704.30273,84.904293 704.11523,84.451172 C 703.93554,84.005857 703.8457,83.228514 703.8457,82.119141 L 703.8457,79.166016 C 703.8457,78.095706 703.64648,77.337895 703.24805,76.892578 C 702.84961,76.439458 702.17773,76.212896 701.23242,76.212891 C 701.18554,76.212896 701.10742,76.216802 700.99805,76.224609 C 700.88867,76.232427 700.80664,76.236333 700.75195,76.236328 L 700.75195,73.787109 C 700.80664,73.787117 700.88867,73.791023 700.99805,73.798828 C 701.10742,73.806648 701.18554,73.810554 701.23242,73.810547 C 702.16992,73.810554 702.83789,73.583992 703.23633,73.130859 C 703.64257,72.677743 703.8457,71.912119 703.8457,70.833984 L 703.8457,67.904297 C 703.8457,66.787124 703.93554,66.001968 704.11523,65.548828 C 704.30273,65.095719 704.61913,64.736345 705.06445,64.470703 C 705.43163,64.275408 705.87695,64.130876 706.40039,64.037109 C 706.92382,63.943377 707.57616,63.896502 708.35742,63.896484 C 708.45116,63.896502 708.59569,63.900408 708.79102,63.908203 C 708.98632,63.916033 709.13866,63.919939 709.24805,63.919922 M 703.0957,93.966797 L 709.01367,93.966797 L 709.01367,96.462891 L 706.25977,96.462891 L 706.25977,113.8418 L 709.01367,113.8418 L 709.01367,116.33789 L 703.0957,116.33789 L 703.0957,93.966797"
+       id="text5546" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 760.75195,63.908203 L 761.54883,63.908203 C 762.4082,63.90822 763.09961,63.955095 763.62305,64.048828 C 764.14648,64.142595 764.58398,64.291033 764.93555,64.494141 C 765.38085,64.744157 765.69335,65.103532 765.87305,65.572266 C 766.06054,66.033218 766.15429,66.806655 766.1543,67.892578 L 766.1543,70.845703 C 766.15429,71.916025 766.35351,72.677743 766.75195,73.130859 C 767.15038,73.57618 767.82226,73.798836 768.76758,73.798828 C 768.81444,73.798836 768.89257,73.794929 769.00195,73.787109 C 769.11132,73.779304 769.19335,73.775398 769.24805,73.775391 L 769.24805,76.224609 L 768.81445,76.224609 C 767.83788,76.224614 767.15038,76.443364 766.75195,76.880859 C 766.35351,77.318363 766.15429,78.076175 766.1543,79.154297 L 766.1543,82.107422 C 766.15429,83.224607 766.06054,84.009763 765.87305,84.462891 C 765.69335,84.916012 765.38085,85.267574 764.93555,85.517578 C 764.56835,85.712886 764.12304,85.857417 763.59961,85.951172 C 763.07617,86.044917 762.42382,86.091792 761.64258,86.091797 C 761.54883,86.091792 761.40429,86.087886 761.20898,86.080078 C 761.01367,86.072261 760.86133,86.068355 760.75195,86.068359 L 760.75195,83.619141 C 760.82226,83.619138 760.91992,83.623044 761.04492,83.630859 C 761.16992,83.638669 761.25586,83.642576 761.30273,83.642578 C 762.09179,83.642576 762.62304,83.490232 762.89648,83.185547 C 763.17773,82.88867 763.31836,82.263671 763.31836,81.310547 L 763.31836,78.509766 C 763.31836,77.337895 763.49414,76.513677 763.8457,76.037109 C 764.19726,75.55274 764.83007,75.20899 765.74414,75.005859 C 764.83007,74.794928 764.19726,74.447272 763.8457,73.962891 C 763.49414,73.478523 763.31836,72.658212 763.31836,71.501953 L 763.31836,68.666016 C 763.31836,67.712904 763.17773,67.087905 762.89648,66.791016 C 762.62304,66.486343 762.09179,66.333999 761.30273,66.333984 C 761.25586,66.333999 761.16992,66.337906 761.04492,66.345703 C 760.91992,66.35353 760.82226,66.357437 760.75195,66.357422 L 760.75195,63.908203 M 767.00977,93.955078 L 767.00977,116.32617 L 761.08008,116.32617 L 761.08008,113.83008 L 763.8457,113.83008 L 763.8457,96.451172 L 761.08008,96.451172 L 761.08008,93.955078 L 767.00977,93.955078"
+       id="text5554" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 823.79883,62.977287 L 826.21289,62.977287 L 826.21289,86.977287 L 823.79883,86.977287 L 823.79883,62.977287 M 827.10352,113.54369 L 821.29102,93.6101 L 822.87305,93.6101 L 828.70898,113.54369 L 827.10352,113.54369"
+       id="text5564" />
+    <g
+       id="g3597">
+      <path
+         id="text5570"
+         d="M 22.996094,139.10156 C 22.907541,140.40886 22.403635,141.44792 21.484375,142.21875 C 20.565095,142.98958 19.365878,143.375 17.886719,143.375 C 16.183589,143.375 14.859372,142.84375 13.914063,141.78125 C 12.968749,140.71875 12.496093,139.22917 12.496094,137.3125 C 12.496093,135.35417 12.977863,133.85418 13.941406,132.8125 C 14.904945,131.77084 16.29036,131.25001 18.097656,131.25 C 19.566398,131.25001 20.726554,131.60808 21.578125,132.32422 C 22.429677,133.04037 22.897124,134.05209 22.980469,135.35938 L 20.644531,135.35938 C 20.545564,134.70834 20.279939,134.21225 19.847656,133.87109 C 19.415357,133.52996 18.832024,133.35938 18.097656,133.35938 C 17.055984,133.35938 16.264318,133.69532 15.722656,134.36719 C 15.180986,135.03907 14.910153,136.02084 14.910156,137.3125 C 14.910153,138.5625 15.179684,139.52865 15.71875,140.21094 C 16.257808,140.89323 17.024734,141.23438 18.019531,141.23438 C 18.738274,141.23438 19.326815,141.05078 19.785156,140.68359 C 20.243481,140.31641 20.540356,139.78907 20.675781,139.10156 L 22.996094,139.10156 z M 29.558594,142 C 29.27213,142.44271 28.89713,142.77995 28.433594,143.01172 C 27.970048,143.24349 27.430986,143.35937 26.816406,143.35938 C 25.993487,143.35937 25.359373,143.125 24.914063,142.65625 C 24.468749,142.1875 24.246093,141.52083 24.246094,140.65625 C 24.246093,139.85417 24.468749,139.24219 24.914063,138.82031 C 25.359373,138.39844 26.09505,138.10938 27.121094,137.95313 C 27.355465,137.91667 27.662756,137.87501 28.042969,137.82813 C 29.006505,137.70313 29.488275,137.42448 29.488281,136.99219 C 29.488275,136.64844 29.381505,136.40235 29.167969,136.25391 C 28.954422,136.10548 28.597651,136.03126 28.097656,136.03125 C 27.639319,136.03126 27.287757,136.1224 27.042969,136.30469 C 26.798174,136.48699 26.675778,136.7474 26.675781,137.08594 L 26.675781,137.21094 L 24.550781,137.21094 L 24.550781,137.05469 C 24.55078,136.1849 24.858072,135.50131 25.472656,135.00391 C 26.087237,134.50652 26.936195,134.25782 28.019531,134.25781 C 29.207026,134.25782 30.117181,134.46355 30.75,134.875 C 31.382805,135.28647 31.699211,135.88022 31.699219,136.65625 L 31.699219,141.48438 C 31.699211,141.83854 31.735669,142.10287 31.808594,142.27734 C 31.881502,142.45182 32.003898,142.58333 32.175781,142.67188 L 32.175781,143.05469 L 29.808594,143.05469 C 29.730463,142.90885 29.670567,142.7474 29.628906,142.57031 C 29.587234,142.39323 29.563796,142.20313 29.558594,142 L 29.558594,142 z M 29.519531,138.875 C 29.149734,139.04688 28.723953,139.1849 28.242188,139.28906 C 27.760413,139.39323 27.511715,139.44792 27.496094,139.45313 C 27.095049,139.56771 26.815101,139.71094 26.65625,139.88281 C 26.497393,140.05469 26.417966,140.29167 26.417969,140.59375 C 26.417966,140.90625 26.519528,141.15495 26.722656,141.33984 C 26.925778,141.52474 27.199215,141.61719 27.542969,141.61719 C 28.157548,141.61719 28.64062,141.44401 28.992188,141.09766 C 29.343744,140.7513 29.519525,140.27865 29.519531,139.67969 L 29.519531,138.875 z M 39.691406,138.85938 C 39.691399,138.00521 39.529941,137.35287 39.207031,136.90234 C 38.884108,136.45183 38.415359,136.22657 37.800781,136.22656 C 37.19661,136.22657 36.736975,136.45053 36.421875,136.89844 C 36.106767,137.34636 35.949216,138.00001 35.949219,138.85938 C 35.949216,139.66146 36.11458,140.28125 36.445313,140.71875 C 36.776038,141.15625 37.243485,141.375 37.847656,141.375 C 38.420567,141.375 38.871088,141.15104 39.199219,140.70313 C 39.527337,140.25521 39.691399,139.64063 39.691406,138.85938 L 39.691406,138.85938 z M 33.738281,146.46094 L 33.738281,134.5625 L 35.902344,134.5625 L 35.902344,135.71094 C 36.230465,135.21095 36.59635,134.84636 37,134.61719 C 37.403641,134.38803 37.878901,134.27345 38.425781,134.27344 C 39.472649,134.27345 40.321607,134.68621 40.972656,135.51172 C 41.623689,136.33725 41.94921,137.42188 41.949219,138.76563 C 41.94921,140.125 41.623689,141.22787 40.972656,142.07422 C 40.321607,142.92057 39.483066,143.34375 38.457031,143.34375 C 37.915359,143.34375 37.432287,143.22917 37.007813,143 C 36.583329,142.77083 36.230465,142.4375 35.949219,142 L 35.949219,146.46094 L 33.738281,146.46094 z M 43.027344,140.28906 L 45.292969,140.28906 C 45.313799,140.72136 45.470049,141.04297 45.761719,141.25391 C 46.053382,141.46485 46.490881,141.57031 47.074219,141.57031 C 47.516922,141.57031 47.85937,141.4961 48.101563,141.34766 C 48.343744,141.19922 48.464838,140.98959 48.464844,140.71875 C 48.464838,140.33334 48.011713,140.04427 47.105469,139.85156 C 46.735673,139.77344 46.441402,139.70573 46.222656,139.64844 C 45.118487,139.36719 44.351561,139.03386 43.921875,138.64844 C 43.492187,138.26303 43.277343,137.74219 43.277344,137.08594 C 43.277343,136.21615 43.591145,135.52735 44.21875,135.01953 C 44.846352,134.51173 45.696611,134.25782 46.769531,134.25781 C 47.904943,134.25782 48.796869,134.51043 49.445313,135.01563 C 50.093742,135.52084 50.438794,136.23178 50.480469,137.14844 L 48.269531,137.14844 C 48.253901,136.78907 48.117182,136.51042 47.859375,136.3125 C 47.601557,136.11459 47.243485,136.01563 46.785156,136.01563 C 46.352861,136.01563 46.031246,136.08074 45.820313,136.21094 C 45.609372,136.34115 45.503903,136.53646 45.503906,136.79688 C 45.503903,137.13542 46.069007,137.4349 47.199219,137.69531 C 47.45963,137.75261 47.665359,137.79948 47.816406,137.83594 C 48.946608,138.10157 49.718743,138.42188 50.132813,138.79688 C 50.546867,139.17188 50.753898,139.70052 50.753906,140.38281 C 50.753898,141.34636 50.414055,142.08073 49.734375,142.58594 C 49.054681,143.09115 48.066401,143.34375 46.769531,143.34375 C 45.597653,143.34375 44.680987,143.08073 44.019531,142.55469 C 43.358072,142.02865 43.027343,141.30469 43.027344,140.38281 L 43.027344,140.28906 z M 57.011719,143.05469 L 57.011719,131.54688 L 59.378906,131.54688 L 59.378906,140.92969 L 64.996094,140.92969 L 64.996094,143.05469 L 57.011719,143.05469 z M 67.972656,138.79688 C 67.972653,139.64063 68.14583,140.29167 68.492188,140.75 C 68.838538,141.20834 69.332027,141.4375 69.972656,141.4375 C 70.602859,141.4375 71.09114,141.20834 71.4375,140.75 C 71.783847,140.29167 71.957024,139.64063 71.957031,138.79688 C 71.957024,137.95834 71.78515,137.3112 71.441406,136.85547 C 71.09765,136.39975 70.608067,136.17188 69.972656,136.17188 C 69.332027,136.17188 68.838538,136.39975 68.492188,136.85547 C 68.14583,137.3112 67.972653,137.95834 67.972656,138.79688 L 67.972656,138.79688 z M 65.667969,138.79688 C 65.667968,137.38542 66.05078,136.27605 66.816406,135.46875 C 67.582029,134.66147 68.634111,134.25782 69.972656,134.25781 C 71.305983,134.25782 72.356764,134.66147 73.125,135.46875 C 73.89322,136.27605 74.277335,137.38542 74.277344,138.79688 C 74.277335,140.21354 73.89322,141.32552 73.125,142.13281 C 72.356764,142.9401 71.305983,143.34375 69.972656,143.34375 C 68.634111,143.34375 67.582029,142.9401 66.816406,142.13281 C 66.05078,141.32552 65.667968,140.21354 65.667969,138.79688 L 65.667969,138.79688 z M 80.949219,139.85156 L 83.191406,139.85156 C 83.097648,140.92969 82.704419,141.78125 82.011719,142.40625 C 81.319004,143.03125 80.42838,143.34375 79.339844,143.34375 C 78.105465,143.34375 77.138019,142.94141 76.4375,142.13672 C 75.736978,141.33203 75.386718,140.21875 75.386719,138.79688 C 75.386718,137.38021 75.744791,136.26954 76.460938,135.46484 C 77.177081,134.66016 78.162757,134.25782 79.417969,134.25781 C 80.516921,134.25782 81.398431,134.54949 82.0625,135.13281 C 82.726555,135.71615 83.097648,136.52865 83.175781,137.57031 L 80.917969,137.57031 C 80.855463,137.11719 80.696609,136.77084 80.441406,136.53125 C 80.186193,136.29167 79.850255,136.17188 79.433594,136.17188 C 78.87109,136.17188 78.450517,136.39324 78.171875,136.83594 C 77.893226,137.27865 77.753903,137.94271 77.753906,138.82813 C 77.753903,139.64584 77.898434,140.27474 78.1875,140.71484 C 78.476559,141.15495 78.891923,141.375 79.433594,141.375 C 79.855464,141.375 80.194005,141.2474 80.449219,140.99219 C 80.704421,140.73698 80.871088,140.35677 80.949219,139.85156 L 80.949219,139.85156 z M 84.675781,143.05469 L 84.675781,131.54688 L 86.886719,131.54688 L 86.886719,137.58594 L 89.589844,134.5625 L 92.324219,134.5625 L 89.363281,137.71094 L 92.503906,143.05469 L 89.777344,143.05469 L 87.746094,139.4375 L 86.886719,140.36719 L 86.886719,143.05469 L 84.675781,143.05469 z "
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" />
+      <path
+         id="path5584"
+         d="M 23.746094,146.25 L 12.496094,161.25 L 19.996094,161.25 L 19.996094,168.75 L 27.496094,168.75 L 27.496094,161.25 L 34.996094,161.25 L 23.746094,146.25 z M 22.714844,150.46875 L 24.746094,150.46875 L 27.871094,159.09375 L 25.996094,159.09375 L 25.402344,157.3125 L 22.058594,157.3125 L 21.496094,159.09375 L 19.621094,159.09375 L 22.714844,150.46875 z M 23.746094,152.1875 L 22.527344,155.84375 L 24.933594,155.84375 L 23.746094,152.1875 z "
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 119.9707,129.82617 L 117.58008,137.17383 L 122.37305,137.17383 L 119.9707,129.82617 M 117.9082,126.36914 L 122.00977,126.36914 L 128.23242,143.63086 L 124.50586,143.63086 L 123.33398,140.08008 L 116.64258,140.08008 L 115.50586,143.63086 L 111.76758,143.63086 L 117.9082,126.36914"
+       id="text5641" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 172.98047,138.29297 L 176.48438,138.29297 C 176.61718,139.23829 177.0039,139.94141 177.64453,140.40234 C 178.28515,140.85547 179.21093,141.08203 180.42188,141.08203 C 181.45312,141.08203 182.23046,140.89844 182.75391,140.53125 C 183.27733,140.16407 183.53905,139.6211 183.53906,138.90234 C 183.53905,137.85547 182.03515,136.98829 179.02734,136.30078 C 178.98827,136.29298 178.95312,136.28516 178.92188,136.27734 C 178.84374,136.26173 178.72265,136.23438 178.55859,136.19531 C 176.94921,135.84376 175.80078,135.44923 175.11328,135.01172 C 174.5039,134.6211 174.03906,134.09767 173.71875,133.44141 C 173.39844,132.77735 173.23828,131.99611 173.23828,131.09766 C 173.23828,129.41798 173.80859,128.13283 174.94922,127.24219 C 176.08984,126.34377 177.73828,125.89455 179.89453,125.89453 C 181.91015,125.89455 183.48436,126.37111 184.61719,127.32422 C 185.7578,128.27736 186.35936,129.62111 186.42188,131.35547 L 183.01172,131.35547 C 182.94921,130.51954 182.6289,129.88283 182.05078,129.44531 C 181.47265,129.00783 180.64843,128.78908 179.57813,128.78906 C 178.64843,128.78908 177.92968,128.97267 177.42188,129.33984 C 176.92187,129.69923 176.67187,130.21486 176.67188,130.88672 C 176.67187,131.80079 177.65234,132.48439 179.61328,132.9375 C 180.14452,133.06251 180.55859,133.16017 180.85547,133.23047 C 182.11327,133.55079 183.0039,133.80079 183.52734,133.98047 C 184.05858,134.16017 184.51952,134.35938 184.91016,134.57813 C 185.61327,134.96876 186.14061,135.48829 186.49219,136.13672 C 186.84374,136.77735 187.01952,137.54688 187.01953,138.44531 C 187.01952,140.24219 186.41405,141.63672 185.20313,142.62891 C 183.99218,143.61328 182.28515,144.10547 180.08203,144.10547 C 177.91015,144.10547 176.20703,143.60156 174.97266,142.59375 C 173.73828,141.58594 173.07422,140.15235 172.98047,138.29297"
+       id="text5645" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 236.16211,140.51367 L 239.00977,140.51367 C 240.65819,140.51367 241.8496,140.08399 242.58398,139.22461 C 243.32616,138.35743 243.69725,136.95508 243.69727,135.01758 C 243.69725,133.0879 243.3535,131.66993 242.66602,130.76367 C 241.9785,129.85744 240.90429,129.40431 239.44336,129.4043 L 236.16211,129.4043 L 236.16211,140.51367 M 232.68164,143.63086 L 232.68164,126.36914 L 239.44336,126.36914 C 242.09179,126.36916 244.06444,127.084 245.36133,128.51367 C 246.666,129.94337 247.31834,132.11134 247.31836,135.01758 C 247.31834,136.59571 247.07616,137.98633 246.5918,139.18945 C 246.11522,140.39258 245.41991,141.36133 244.50586,142.0957 C 243.81835,142.64258 243.0371,143.03711 242.16211,143.2793 C 241.2871,143.51367 240.06054,143.63086 238.48242,143.63086 L 232.68164,143.63086"
+       id="text5649" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 293.97656,143.63086 L 293.97656,126.36914 L 306.02344,126.36914 L 306.02344,129.36914 L 297.48047,129.36914 L 297.48047,133.2832 L 304.96875,133.2832 L 304.96875,136.2832 L 297.48047,136.2832 L 297.48047,143.63086 L 293.97656,143.63086"
+       id="text5653" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 365.17969,141.57422 C 364.53905,142.44141 363.80858,143.07813 362.98828,143.48438 C 362.17577,143.89062 361.21874,144.09375 360.11719,144.09375 C 357.70312,144.09375 355.74609,143.25781 354.24609,141.58594 C 352.7539,139.90625 352.00781,137.70313 352.00781,134.97656 C 352.00781,132.22657 352.7539,130.02736 354.24609,128.37891 C 355.73828,126.73049 357.72656,125.90627 360.21094,125.90625 C 362.37499,125.90627 364.14061,126.4258 365.50781,127.46484 C 366.87498,128.49611 367.68748,129.91798 367.94531,131.73047 L 364.32422,131.73047 C 364.10546,130.83204 363.65624,130.14845 362.97656,129.67969 C 362.30468,129.21095 361.42577,128.97658 360.33984,128.97656 C 358.89452,128.97658 357.75781,129.50783 356.92969,130.57031 C 356.10937,131.62501 355.69921,133.08595 355.69922,134.95313 C 355.69921,136.82813 356.1289,138.29688 356.98828,139.35938 C 357.84765,140.42188 359.02734,140.95313 360.52734,140.95313 C 361.65233,140.95313 362.59374,140.6211 363.35156,139.95703 C 364.10936,139.29297 364.57811,138.38282 364.75781,137.22656 L 360.84375,137.22656 L 360.84375,134.27344 L 367.99219,134.27344 L 367.99219,143.61328 L 365.61328,143.61328 L 365.17969,141.57422"
+       id="text5657" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 412.86328,143.63086 L 412.86328,126.36914 L 416.4375,126.36914 L 416.4375,132.80273 L 423.5625,132.80273 L 423.5625,126.36914 L 427.13672,126.36914 L 427.13672,143.63086 L 423.5625,143.63086 L 423.5625,135.97852 L 416.4375,135.97852 L 416.4375,143.63086 L 412.86328,143.63086"
+       id="text5661" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 474.48047,136.95703 L 477.91406,136.95703 L 477.91406,139.04297 C 477.91406,139.64453 478.09375,140.10547 478.45313,140.42578 C 478.8125,140.73828 479.32812,140.89453 480,140.89453 C 480.73437,140.89453 481.24609,140.70313 481.53516,140.32031 C 481.82421,139.9375 481.96874,139.21875 481.96875,138.16406 L 481.96875,126.12891 L 485.51953,126.12891 L 485.51953,138.32813 C 485.51952,139.42188 485.45311,140.22657 485.32031,140.74219 C 485.1953,141.25 484.98436,141.69922 484.6875,142.08984 C 484.23436,142.66797 483.61327,143.10938 482.82422,143.41406 C 482.03515,143.71875 481.10937,143.87109 480.04688,143.87109 C 479.07031,143.87109 478.20703,143.73828 477.45703,143.47266 C 476.70703,143.20703 476.08203,142.8125 475.58203,142.28906 C 475.18359,141.86719 474.89844,141.39844 474.72656,140.88281 C 474.5625,140.35938 474.48047,139.5 474.48047,138.30469 L 474.48047,136.95703"
+       id="text5665" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 532.32422,143.63086 L 532.32422,126.36914 L 535.875,126.36914 L 535.875,133.45898 L 542.61328,126.36914 L 547.05469,126.36914 L 540.16406,133.35352 L 547.67578,143.63086 L 543.33984,143.63086 L 537.71484,135.73242 L 535.875,137.56055 L 535.875,143.63086 L 532.32422,143.63086"
+       id="text5669" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 594.01172,143.63086 L 594.01172,126.36914 L 597.5625,126.36914 L 597.5625,140.44336 L 605.98828,140.44336 L 605.98828,143.63086 L 594.01172,143.63086"
+       id="text5673" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 143.15039,203.63086 L 143.15039,200.63086 L 152.53711,189.49805 L 143.33789,189.49805 L 143.33789,186.36914 L 156.84961,186.36914 L 156.84961,189.36914 L 147.43945,200.51367 L 156.63867,200.51367 L 156.63867,203.63086 L 143.15039,203.63086"
+       id="text5679" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 202.37109,203.63086 L 207.79688,194.81836 L 202.37109,186.36914 L 206.47266,186.36914 L 210,192.4043 L 213.50391,186.36914 L 217.62891,186.36914 L 212.20313,194.79492 L 217.62891,203.63086 L 213.52734,203.63086 L 210,197.6543 L 206.47266,203.63086 L 202.37109,203.63086"
+       id="text5683" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 277.875,197.68359 C 277.74217,199.64454 276.98436,201.20313 275.60156,202.35938 C 274.22655,203.51563 272.42968,204.09375 270.21094,204.09375 C 267.65624,204.09375 265.66796,203.29688 264.24609,201.70313 C 262.83203,200.10938 262.125,197.87501 262.125,195 C 262.125,192.06251 262.84765,189.81251 264.29297,188.25 C 265.73828,186.68752 267.8164,185.90627 270.52734,185.90625 C 272.73046,185.90627 274.46874,186.44533 275.74219,187.52344 C 277.02342,188.59377 277.72655,190.10939 277.85156,192.07031 L 274.34766,192.07031 C 274.19921,191.09376 273.80077,190.35158 273.15234,189.84375 C 272.50389,189.32814 271.6289,189.07033 270.52734,189.07031 C 268.96484,189.07033 267.77734,189.57423 266.96484,190.58203 C 266.15234,191.58986 265.74609,193.06251 265.74609,195 C 265.74609,196.87501 266.14843,198.32422 266.95313,199.34766 C 267.76562,200.3711 268.91796,200.88282 270.41016,200.88281 C 271.48827,200.88282 272.37108,200.60938 273.05859,200.0625 C 273.74608,199.50782 274.19139,198.71485 274.39453,197.68359 L 277.875,197.68359"
+       id="text5687" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 328.33594,203.63086 L 322.38281,186.36914 L 326.32031,186.36914 L 329.98828,199.2832 L 333.72656,186.36914 L 337.61719,186.36914 L 331.73438,203.63086 L 328.33594,203.63086"
+       id="text5691" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 386.32031,200.51367 L 390.52734,200.51367 C 391.51952,200.51367 392.24218,200.33399 392.69531,199.97461 C 393.14843,199.61524 393.37499,199.04883 393.375,198.27539 C 393.37499,197.47071 393.15233,196.89258 392.70703,196.54102 C 392.26171,196.18165 391.52733,196.00196 390.50391,196.00195 L 386.32031,196.00195 L 386.32031,200.51367 M 386.32031,193.04883 L 390.375,193.04883 C 391.24999,193.04884 391.89061,192.9004 392.29688,192.60352 C 392.70311,192.29884 392.90624,191.82228 392.90625,191.17383 C 392.90624,190.54103 392.70702,190.084 392.30859,189.80273 C 391.91796,189.51369 391.26561,189.36915 390.35156,189.36914 L 386.32031,189.36914 L 386.32031,193.04883 M 382.92188,203.63086 L 382.92188,186.36914 L 391.05469,186.36914 C 392.8203,186.36916 394.16405,186.74416 395.08594,187.49414 C 396.01561,188.23634 396.48045,189.31837 396.48047,190.74023 C 396.48045,191.61525 396.30858,192.34571 395.96484,192.93164 C 395.62108,193.51759 395.10545,193.97071 394.41797,194.29102 C 395.30858,194.6504 395.97264,195.16993 396.41016,195.84961 C 396.85545,196.52149 397.07811,197.36133 397.07813,198.36914 C 397.07811,200.04883 396.53123,201.34571 395.4375,202.25977 C 394.34374,203.17383 392.79296,203.63086 390.78516,203.63086 L 382.92188,203.63086"
+       id="text5695" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 442.88672,203.63086 L 442.88672,186.36914 L 446.60156,186.36914 L 453.60938,198.22852 L 453.60938,186.36914 L 457.11328,186.36914 L 457.11328,203.63086 L 453.44531,203.63086 L 446.39063,191.77148 L 446.39063,203.63086 L 442.88672,203.63086"
+       id="text5699" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 501.32813,203.63086 L 501.32813,186.36914 L 506.57813,186.36914 L 510.01172,199.50586 L 513.39844,186.36914 L 518.67188,186.36914 L 518.67188,203.63086 L 515.34375,203.63086 L 515.34375,189.70898 L 511.83984,203.63086 L 508.20703,203.63086 L 504.65625,189.70898 L 504.65625,203.63086 L 501.32813,203.63086"
+       id="text5703" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 658.22461,134.6543 L 658.22461,131.10352 L 661.77539,131.10352 L 661.77539,134.6543 L 658.22461,134.6543 M 658.22461,143.63086 L 658.22461,140.10352 L 661.77539,140.10352 L 661.77539,143.63086 L 658.22461,143.63086 M 658.24805,164.6543 L 658.24805,161.10352 L 661.77539,161.10352 L 661.77539,164.6543 L 658.24805,164.6543 M 658.24805,177.68555 L 658.24805,176.31445 C 658.90429,176.12695 659.38867,175.83789 659.70117,175.44727 C 660.01367,175.05664 660.16992,174.54883 660.16992,173.92383 L 660.16992,173.63086 L 658.22461,173.63086 L 658.22461,170.10352 L 661.77539,170.10352 L 661.77539,173.49023 C 661.77539,174.66211 661.47851,175.59961 660.88477,176.30273 C 660.29101,177.01367 659.41211,177.47461 658.24805,177.68555"
+       id="text5725" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 720.78516,126.7793 L 723.03516,126.7793 L 723.03516,133.33008 L 720.78516,133.33008 L 720.78516,126.7793 M 716.96484,126.7793 L 719.21484,126.7793 L 719.21484,133.33008 L 716.96484,133.33008 L 716.96484,126.7793 M 718.88672,156.7793 L 721.13672,156.7793 L 721.13672,163.33008 L 718.88672,163.33008 L 718.88672,156.7793"
+       id="text5731" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 772.5,140.60938 L 772.5,129.10156 L 780.85156,129.10156 L 780.85156,131.10156 L 774.83594,131.10156 L 774.83594,133.55469 L 780.33594,133.55469 L 780.33594,135.52344 L 774.83594,135.52344 L 774.83594,138.48438 L 781.13281,138.48438 L 781.13281,140.60938 L 772.5,140.60938 M 782.74219,140.60938 L 782.74219,132.11719 L 784.96875,132.11719 L 784.96875,133.125 C 785.28645,132.71355 785.66145,132.40626 786.09375,132.20313 C 786.52604,131.9948 787.00781,131.89063 787.53906,131.89063 C 788.47656,131.89063 789.17708,132.13543 789.64063,132.625 C 790.10937,133.10938 790.34374,133.84115 790.34375,134.82031 L 790.34375,140.60938 L 788.07031,140.60938 L 788.07031,135.47656 C 788.07031,134.86719 787.96614,134.4323 787.75781,134.17188 C 787.55468,133.91147 787.22135,133.78126 786.75781,133.78125 C 786.22135,133.78126 785.79687,133.94271 785.48438,134.26563 C 785.17187,134.58334 785.01562,135.01823 785.01563,135.57031 L 785.01563,140.60938 L 782.74219,140.60938 M 796.07813,140.67188 C 795.86979,140.67708 795.61979,140.6849 795.32813,140.69531 C 795.04166,140.71094 794.85937,140.71875 794.78125,140.71875 C 793.91146,140.71875 793.3151,140.55729 792.99219,140.23438 C 792.67448,139.90625 792.51562,139.26302 792.51563,138.30469 L 792.51563,133.71094 L 791.39063,133.71094 L 791.39063,132.11719 L 792.51563,132.11719 L 792.51563,129.79688 L 794.76563,129.79688 L 794.76563,132.11719 L 796.07813,132.11719 L 796.07813,133.71094 L 794.76563,133.71094 L 794.76563,138.41406 C 794.76562,138.63802 794.8151,138.78646 794.91406,138.85938 C 795.01302,138.92709 795.21614,138.96094 795.52344,138.96094 L 796.07813,138.96094 L 796.07813,140.67188 M 802.63281,138.03125 L 804.89844,138.03125 C 804.66926,138.92709 804.20572,139.63021 803.50781,140.14063 C 802.8151,140.64583 801.96874,140.89844 800.96875,140.89844 C 799.73958,140.89844 798.76562,140.48698 798.04688,139.66406 C 797.32812,138.83594 796.96875,137.71615 796.96875,136.30469 C 796.96875,134.91407 797.32292,133.81772 798.03125,133.01563 C 798.73958,132.21355 799.70833,131.81251 800.9375,131.8125 C 802.23958,131.81251 803.24478,132.20834 803.95313,133 C 804.66145,133.78647 805.01562,134.90886 805.01563,136.36719 C 805.01562,136.52865 805.01301,136.65105 805.00781,136.73438 C 805.0078,136.8125 805.0026,136.88802 804.99219,136.96094 L 799.32031,136.96094 C 799.35156,137.62761 799.51302,138.13021 799.80469,138.46875 C 800.10156,138.80729 800.52604,138.97656 801.07813,138.97656 C 801.46874,138.97656 801.78906,138.90104 802.03906,138.75 C 802.28906,138.59375 802.48697,138.35417 802.63281,138.03125 M 799.32031,135.46875 L 802.66406,135.46875 C 802.64322,134.89584 802.48958,134.46094 802.20313,134.16406 C 801.92187,133.86199 801.51562,133.71094 800.98438,133.71094 C 800.48958,133.71094 800.09895,133.86199 799.8125,134.16406 C 799.53125,134.46615 799.36718,134.90105 799.32031,135.46875 M 806.52344,140.60938 L 806.52344,132.11719 L 808.63281,132.11719 L 808.63281,133.57031 C 808.92968,132.98699 809.27604,132.5599 809.67188,132.28906 C 810.0677,132.01303 810.53906,131.87501 811.08594,131.875 C 811.17447,131.87501 811.24218,131.87761 811.28906,131.88281 C 811.34114,131.88282 811.38281,131.88543 811.41406,131.89063 L 811.42188,134.19531 L 810.66406,134.19531 C 810.04427,134.19532 809.57812,134.35678 809.26563,134.67969 C 808.95312,135.00261 808.79687,135.48178 808.79688,136.11719 L 808.79688,140.60938 L 806.52344,140.60938"
+       id="text5737" />
+    <path
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 787.5,172.5 L 787.5,157.5 L 772.5,165 L 787.5,172.5 z "
+       id="path5745" />
+    <path
+       style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1"
+       d="M 810,150 L 810,165 L 780,165"
+       id="path5747" />
+    <g
+       id="g3601">
+      <path
+         id="text5753"
+         d="M 12.496094,197.64063 L 14.832032,197.64063 C 14.92057,198.27084 15.178382,198.73828 15.605469,199.04297 C 16.032548,199.34766 16.649735,199.5 17.457032,199.5 C 18.144525,199.5 18.662754,199.37761 19.011719,199.13281 C 19.36067,198.88802 19.535149,198.52604 19.535157,198.04688 C 19.535149,197.34896 18.532546,196.77084 16.527344,196.3125 C 16.501298,196.3073 16.47786,196.30209 16.457032,196.29688 C 16.404944,196.28646 16.324215,196.26823 16.214844,196.24219 C 15.141924,196.00782 14.3763,195.7448 13.917969,195.45313 C 13.511717,195.19271 13.201822,194.84245 12.988282,194.40234 C 12.774739,193.96225 12.667968,193.44272 12.667969,192.84375 C 12.667968,191.72397 13.048176,190.8659 13.808594,190.26953 C 14.569008,189.67319 15.667965,189.37501 17.105469,189.375 C 18.449212,189.37501 19.499993,189.69272 20.257813,190.32813 C 21.015616,190.96355 21.415355,191.85938 21.457032,193.01563 L 19.183594,193.01563 C 19.14192,192.45834 18.928379,192.03386 18.542969,191.74219 C 18.157546,191.45053 17.608067,191.3047 16.894532,191.30469 C 16.274735,191.3047 15.796871,191.42579 15.460938,191.66797 C 15.124997,191.91017 14.957028,192.25522 14.957032,192.70313 C 14.957028,193.31251 15.610674,193.76824 16.917969,194.07031 C 17.27213,194.15365 17.548172,194.21876 17.746094,194.26563 C 18.584629,194.47917 19.17968,194.64584 19.53125,194.76563 C 19.882805,194.88542 20.188794,195.01824 20.449219,195.16406 C 20.91796,195.42448 21.269522,195.76954 21.503907,196.19922 C 21.738272,196.62891 21.855459,197.14323 21.855469,197.74219 C 21.855459,198.94011 21.451814,199.86849 20.644532,200.52734 C 19.837232,201.1862 18.699212,201.51562 17.230469,201.51563 C 15.782548,201.51562 14.647133,201.17969 13.824219,200.50781 C 13.001301,199.83594 12.558593,198.88021 12.496094,197.64063 L 12.496094,197.64063 z M 23.566407,201.19531 L 23.566407,189.6875 L 25.824219,189.6875 L 25.824219,193.64063 C 26.131507,193.25522 26.497392,192.96485 26.921875,192.76953 C 27.34635,192.57423 27.82161,192.47657 28.347657,192.47656 C 28.84765,192.47657 29.299473,192.56251 29.703125,192.73438 C 30.106764,192.90626 30.433586,193.15105 30.683594,193.46875 C 30.855461,193.6823 30.976554,193.92709 31.046875,194.20313 C 31.117179,194.47917 31.152335,194.92188 31.152344,195.53125 L 31.152344,195.6875 L 31.152344,201.19531 L 28.894532,201.19531 L 28.894532,196.75 C 28.894525,195.69792 28.798171,195.03777 28.605469,194.76953 C 28.412755,194.50131 28.066401,194.36719 27.566407,194.36719 C 27.029944,194.36719 26.605465,194.52735 26.292969,194.84766 C 25.980466,195.16797 25.824216,195.60417 25.824219,196.15625 L 25.824219,201.19531 L 23.566407,201.19531 z M 33.191407,191.75781 L 33.191407,189.6875 L 35.464844,189.6875 L 35.464844,191.75781 L 33.191407,191.75781 z M 33.191407,201.19531 L 33.191407,192.70313 L 35.464844,192.70313 L 35.464844,201.19531 L 33.191407,201.19531 z M 37.886719,201.19531 L 37.886719,194.29688 L 36.675782,194.29688 L 36.675782,192.70313 L 37.886719,192.70313 L 37.886719,191.91406 C 37.886718,191.12241 38.091144,190.54038 38.5,190.16797 C 38.908852,189.79558 39.553383,189.60939 40.433594,189.60938 C 40.595048,189.60939 40.765621,189.61329 40.945313,189.62109 C 41.124996,189.62892 41.316402,189.64324 41.519532,189.66406 L 41.519532,191.46875 L 40.925782,191.46875 C 40.587236,191.46876 40.36458,191.51303 40.257813,191.60156 C 40.151038,191.69011 40.097653,191.85938 40.097657,192.10938 L 40.097657,192.70313 L 41.519532,192.70313 L 41.519532,194.29688 L 40.113282,194.29688 L 40.113282,201.19531 L 37.886719,201.19531 z M 46.449219,201.25781 C 46.240881,201.26302 45.992183,201.27214 45.703125,201.28516 C 45.414059,201.29818 45.230465,201.30469 45.152344,201.30469 C 44.28255,201.30469 43.687498,201.14193 43.367188,200.81641 C 43.046874,200.49089 42.886718,199.84896 42.886719,198.89063 L 42.886719,194.29688 L 41.761719,194.29688 L 41.761719,192.70313 L 42.886719,192.70313 L 42.886719,190.38281 L 45.136719,190.38281 L 45.136719,192.70313 L 46.449219,192.70313 L 46.449219,194.29688 L 45.136719,194.29688 L 45.136719,199 C 45.136716,199.22396 45.186195,199.3711 45.285157,199.44141 C 45.384111,199.51172 45.587236,199.54688 45.894532,199.54688 L 46.449219,199.54688 L 46.449219,201.25781 z "
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" />
+      <path
+         style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 24.746094,207.125 L 13.496094,222.125 L 20.996094,222.125 L 20.996094,229.625 L 28.496094,229.625 L 28.496094,222.125 L 35.996094,222.125 L 24.746094,207.125 z "
+         id="path5757" />
+    </g>
+    <g
+       id="g5795"
+       transform="translate(727.5,0)">
+      <text
+         sodipodi:linespacing="125%"
+         id="text5797"
+         y="201.19531"
+         x="31.8125"
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+         xml:space="preserve"><tspan
+           y="201.19531"
+           x="31.8125"
+           id="tspan5799"
+           sodipodi:role="line">Shift</tspan></text>
+      <path
+         id="path5801"
+         d="M 27.25,207.125 L 16,222.125 L 23.5,222.125 L 23.5,229.625 L 31,229.625 L 31,222.125 L 38.5,222.125 L 27.25,207.125 z "
+         style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 576.90234,189.63867 L 576.90234,192.20508 L 566.4375,196.48242 L 576.90234,200.74805 L 576.90234,203.31445 L 563.09766,197.63086 L 563.09766,195.29883 L 576.90234,189.63867 M 568.21875,237.68555 L 568.21875,236.31445 C 568.875,236.12695 569.35937,235.83789 569.67188,235.44727 C 569.98437,235.05664 570.14062,234.54883 570.14063,233.92383 L 570.14063,233.63086 L 568.21875,233.63086 L 568.21875,230.10352 L 571.76953,230.10352 L 571.76953,233.49023 C 571.76953,234.6543 571.46875,235.59179 570.86719,236.30273 C 570.27343,237.01367 569.39062,237.47461 568.21875,237.68555"
+       id="text5803" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 623.09766,189.63867 L 636.90234,195.29883 L 636.90234,197.63086 L 623.09766,203.31445 L 623.09766,200.74805 L 633.58594,196.48242 L 623.09766,192.20508 L 623.09766,189.63867 M 628.21875,233.63086 L 628.21875,230.10352 L 631.74609,230.10352 L 631.74609,233.63086 L 628.21875,233.63086"
+       id="text5813" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 688.44727,198.61523 C 688.44726,198.5293 688.44335,198.41602 688.43555,198.27539 C 688.42773,198.12696 688.42382,198.01758 688.42383,197.94727 C 688.42382,197.25977 688.49804,196.68946 688.64648,196.23633 C 688.79492,195.7754 689.0332,195.34571 689.36133,194.94727 C 689.61132,194.6504 689.98242,194.31056 690.47461,193.92773 C 690.9746,193.54493 691.29882,193.26759 691.44727,193.0957 C 691.75976,192.74415 691.9746,192.42775 692.0918,192.14648 C 692.20898,191.86525 692.26757,191.55665 692.26758,191.2207 C 692.26757,190.47853 692.06054,189.9004 691.64648,189.48633 C 691.23241,189.07228 690.65429,188.86525 689.91211,188.86523 C 689.16992,188.86525 688.58398,189.11525 688.1543,189.61523 C 687.73242,190.10744 687.50195,190.80275 687.46289,191.70117 L 684.1582,191.70117 L 684.1582,191.33789 C 684.1582,189.68947 684.67773,188.37697 685.7168,187.40039 C 686.76367,186.41603 688.16992,185.92385 689.93555,185.92383 C 691.74023,185.92385 693.17382,186.38869 694.23633,187.31836 C 695.30663,188.24025 695.84178,189.47853 695.8418,191.0332 C 695.84178,191.58009 695.77928,192.07228 695.6543,192.50977 C 695.5371,192.93946 695.3535,193.33399 695.10352,193.69336 C 694.78319,194.14649 694.2871,194.63868 693.61523,195.16992 C 692.95116,195.69337 692.54882,196.01759 692.4082,196.14258 C 692.11132,196.43165 691.89648,196.73634 691.76367,197.05664 C 691.63866,197.37696 691.57616,197.75977 691.57617,198.20508 C 691.57616,198.24415 691.58007,198.31055 691.58789,198.4043 C 691.59569,198.49805 691.5996,198.56836 691.59961,198.61523 L 688.44727,198.61523 M 688.2832,203.63086 L 688.2832,200.19727 L 691.74023,200.19727 L 691.74023,203.63086 L 688.2832,203.63086 M 686.31445,235.85742 L 692.12695,215.92383 L 693.73242,215.92383 L 687.89648,235.85742 L 686.31445,235.85742"
+       id="text5819" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 18,271.78906 C 17.911447,273.09636 17.406239,274.13542 16.484375,274.90625 C 15.5677,275.67708 14.369784,276.0625 12.890625,276.0625 C 11.187496,276.0625 9.8619761,275.53125 8.9140625,274.46875 C 7.971353,273.40625 7.4999993,271.91667 7.5,270 C 7.4999993,268.04167 7.9817696,266.54168 8.9453125,265.5 C 9.9088511,264.45834 11.294266,263.93751 13.101563,263.9375 C 14.570305,263.93751 15.729158,264.29689 16.578125,265.01563 C 17.432281,265.72918 17.901031,266.73959 17.984375,268.04688 L 15.648438,268.04688 C 15.54947,267.39584 15.283846,266.90105 14.851563,266.5625 C 14.419263,266.21876 13.83593,266.04688 13.101563,266.04688 C 12.059891,266.04688 11.268225,266.38282 10.726563,267.05469 C 10.184892,267.72657 9.9140594,268.70834 9.9140625,270 C 9.9140594,271.25 10.182288,272.21615 10.71875,272.89844 C 11.260412,273.58073 12.028641,273.92188 13.023438,273.92188 C 13.742181,273.92188 14.330722,273.73959 14.789063,273.375 C 15.247387,273.00521 15.544262,272.47657 15.679688,271.78906 L 18,271.78906 M 23.46875,275.80469 C 23.260412,275.8099 23.010412,275.81771 22.71875,275.82813 C 22.432288,275.84375 22.249996,275.85156 22.171875,275.85156 C 21.302081,275.85156 20.705727,275.6901 20.382813,275.36719 C 20.065103,275.03906 19.906249,274.39583 19.90625,273.4375 L 19.90625,268.84375 L 18.78125,268.84375 L 18.78125,267.25 L 19.90625,267.25 L 19.90625,264.92969 L 22.15625,264.92969 L 22.15625,267.25 L 23.46875,267.25 L 23.46875,268.84375 L 22.15625,268.84375 L 22.15625,273.54688 C 22.156247,273.77084 22.205726,273.91927 22.304688,273.99219 C 22.403642,274.0599 22.606767,274.09375 22.914063,274.09375 L 23.46875,274.09375 L 23.46875,275.80469 M 24.789063,275.74219 L 24.789063,267.25 L 26.898438,267.25 L 26.898438,268.70313 C 27.195309,268.1198 27.541663,267.69272 27.9375,267.42188 C 28.333329,267.14584 28.804682,267.00782 29.351563,267.00781 C 29.440099,267.00782 29.507807,267.01043 29.554688,267.01563 C 29.606765,267.01563 29.648432,267.01824 29.679688,267.02344 L 29.6875,269.32813 L 28.929688,269.32813 C 28.309891,269.32813 27.843746,269.48959 27.53125,269.8125 C 27.218747,270.13542 27.062497,270.61459 27.0625,271.25 L 27.0625,275.74219 L 24.789063,275.74219 M 31.023438,275.74219 L 31.023438,264.23438 L 33.296875,264.23438 L 33.296875,275.74219 L 31.023438,275.74219"
+       id="text5827" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 162.96875,266.49609 L 161.375,271.39453 L 164.57031,271.39453 L 162.96875,266.49609 M 161.59375,264.19141 L 164.32813,264.19141 L 168.47656,275.69922 L 165.99219,275.69922 L 165.21094,273.33203 L 160.75,273.33203 L 159.99219,275.69922 L 157.5,275.69922 L 161.59375,264.19141 M 169.53906,275.69922 L 169.53906,264.19141 L 171.8125,264.19141 L 171.8125,275.69922 L 169.53906,275.69922 M 177.64063,275.76172 C 177.43229,275.76693 177.18229,275.77474 176.89063,275.78516 C 176.60416,275.80078 176.42187,275.80859 176.34375,275.80859 C 175.47396,275.80859 174.8776,275.64714 174.55469,275.32422 C 174.23698,274.99609 174.07812,274.35287 174.07813,273.39453 L 174.07813,268.80078 L 172.95313,268.80078 L 172.95313,267.20703 L 174.07813,267.20703 L 174.07813,264.88672 L 176.32813,264.88672 L 176.32813,267.20703 L 177.64063,267.20703 L 177.64063,268.80078 L 176.32813,268.80078 L 176.32813,273.50391 C 176.32812,273.72787 176.3776,273.8763 176.47656,273.94922 C 176.57552,274.01693 176.77864,274.05078 177.08594,274.05078 L 177.64063,274.05078 L 177.64063,275.76172"
+       id="text5831" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 612.96875,266.53906 L 611.375,271.4375 L 614.57031,271.4375 L 612.96875,266.53906 M 611.59375,264.23438 L 614.32813,264.23438 L 618.47656,275.74219 L 615.99219,275.74219 L 615.21094,273.375 L 610.75,273.375 L 609.99219,275.74219 L 607.5,275.74219 L 611.59375,264.23438 M 619.53906,275.74219 L 619.53906,264.23438 L 621.8125,264.23438 L 621.8125,275.74219 L 619.53906,275.74219 M 627.64063,275.80469 C 627.43229,275.8099 627.18229,275.81771 626.89063,275.82813 C 626.60416,275.84375 626.42187,275.85156 626.34375,275.85156 C 625.47396,275.85156 624.8776,275.6901 624.55469,275.36719 C 624.23698,275.03906 624.07812,274.39583 624.07813,273.4375 L 624.07813,268.84375 L 622.95313,268.84375 L 622.95313,267.25 L 624.07813,267.25 L 624.07813,264.92969 L 626.32813,264.92969 L 626.32813,267.25 L 627.64063,267.25 L 627.64063,268.84375 L 626.32813,268.84375 L 626.32813,273.54688 C 626.32812,273.77084 626.3776,273.91927 626.47656,273.99219 C 626.57552,274.0599 626.77864,274.09375 627.08594,274.09375 L 627.64063,274.09375 L 627.64063,275.80469 M 642,274.38281 C 641.57291,274.96094 641.08593,275.38542 640.53906,275.65625 C 639.99739,275.92708 639.35937,276.0625 638.625,276.0625 C 637.01562,276.0625 635.71093,275.50521 634.71094,274.39063 C 633.71614,273.27084 633.21875,271.80209 633.21875,269.98438 C 633.21875,268.15105 633.71614,266.6849 634.71094,265.58594 C 635.70573,264.48699 637.03125,263.93751 638.6875,263.9375 C 640.1302,263.93751 641.30728,264.28387 642.21875,264.97656 C 643.1302,265.66407 643.67186,266.61199 643.84375,267.82031 L 641.42969,267.82031 C 641.28385,267.22136 640.98437,266.76563 640.53125,266.45313 C 640.08333,266.14063 639.49739,265.98438 638.77344,265.98438 C 637.80989,265.98438 637.05208,266.33855 636.5,267.04688 C 635.95312,267.75001 635.67968,268.72397 635.67969,269.96875 C 635.67968,271.21875 635.96614,272.19792 636.53906,272.90625 C 637.11197,273.61459 637.89843,273.96875 638.89844,273.96875 C 639.64843,273.96875 640.27603,273.7474 640.78125,273.30469 C 641.28645,272.86198 641.59895,272.25521 641.71875,271.48438 L 639.10938,271.48438 L 639.10938,269.51563 L 643.875,269.51563 L 643.875,275.74219 L 642.28906,275.74219 L 642,274.38281 M 645.96094,275.74219 L 645.96094,267.25 L 648.07031,267.25 L 648.07031,268.70313 C 648.36718,268.1198 648.71354,267.69272 649.10938,267.42188 C 649.5052,267.14584 649.97656,267.00782 650.52344,267.00781 C 650.61197,267.00782 650.67968,267.01043 650.72656,267.01563 C 650.77864,267.01563 650.82031,267.01824 650.85156,267.02344 L 650.85938,269.32813 L 650.10156,269.32813 C 649.48177,269.32813 649.01562,269.48959 648.70313,269.8125 C 648.39062,270.13542 648.23437,270.61459 648.23438,271.25 L 648.23438,275.74219 L 645.96094,275.74219"
+       id="text5835" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 828,271.78906 C 827.91145,273.09636 827.40624,274.13542 826.48438,274.90625 C 825.5677,275.67708 824.36978,276.0625 822.89063,276.0625 C 821.1875,276.0625 819.86198,275.53125 818.91406,274.46875 C 817.97135,273.40625 817.5,271.91667 817.5,270 C 817.5,268.04167 817.98177,266.54168 818.94531,265.5 C 819.90885,264.45834 821.29427,263.93751 823.10156,263.9375 C 824.5703,263.93751 825.72916,264.29689 826.57813,265.01563 C 827.43228,265.72918 827.90103,266.73959 827.98438,268.04688 L 825.64844,268.04688 C 825.54947,267.39584 825.28385,266.90105 824.85156,266.5625 C 824.41926,266.21876 823.83593,266.04688 823.10156,266.04688 C 822.05989,266.04688 821.26822,266.38282 820.72656,267.05469 C 820.18489,267.72657 819.91406,268.70834 819.91406,270 C 819.91406,271.25 820.18229,272.21615 820.71875,272.89844 C 821.26041,273.58073 822.02864,273.92188 823.02344,273.92188 C 823.74218,273.92188 824.33072,273.73959 824.78906,273.375 C 825.24739,273.00521 825.54426,272.47657 825.67969,271.78906 L 828,271.78906 M 833.46875,275.80469 C 833.26041,275.8099 833.01041,275.81771 832.71875,275.82813 C 832.43229,275.84375 832.25,275.85156 832.17188,275.85156 C 831.30208,275.85156 830.70573,275.6901 830.38281,275.36719 C 830.0651,275.03906 829.90625,274.39583 829.90625,273.4375 L 829.90625,268.84375 L 828.78125,268.84375 L 828.78125,267.25 L 829.90625,267.25 L 829.90625,264.92969 L 832.15625,264.92969 L 832.15625,267.25 L 833.46875,267.25 L 833.46875,268.84375 L 832.15625,268.84375 L 832.15625,273.54688 C 832.15625,273.77084 832.20573,273.91927 832.30469,273.99219 C 832.40364,274.0599 832.60677,274.09375 832.91406,274.09375 L 833.46875,274.09375 L 833.46875,275.80469 M 834.78906,275.74219 L 834.78906,267.25 L 836.89844,267.25 L 836.89844,268.70313 C 837.19531,268.1198 837.54166,267.69272 837.9375,267.42188 C 838.33333,267.14584 838.80468,267.00782 839.35156,267.00781 C 839.4401,267.00782 839.50781,267.01043 839.55469,267.01563 C 839.60677,267.01563 839.64843,267.01824 839.67969,267.02344 L 839.6875,269.32813 L 838.92969,269.32813 C 838.30989,269.32813 837.84375,269.48959 837.53125,269.8125 C 837.21875,270.13542 837.0625,270.61459 837.0625,271.25 L 837.0625,275.74219 L 834.78906,275.74219 M 841.02344,275.74219 L 841.02344,264.23438 L 843.29688,264.23438 L 843.29688,275.74219 L 841.02344,275.74219"
+       id="text5839" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 108.94531,264.01953 L 105.64844,252.51172 L 108.10156,252.51172 L 110.07031,260.62891 L 111.73438,252.51172 L 114.25781,252.51172 L 115.92188,260.62891 L 117.89063,252.51172 L 120.32031,252.51172 L 117.03125,264.01953 L 114.77344,264.01953 L 112.99219,255.20703 L 111.20313,264.01953 L 108.94531,264.01953 M 121.5,254.58203 L 121.5,252.51172 L 123.77344,252.51172 L 123.77344,254.58203 L 121.5,254.58203 M 121.5,264.01953 L 121.5,255.52734 L 123.77344,255.52734 L 123.77344,264.01953 L 121.5,264.01953 M 125.79688,264.01953 L 125.79688,255.52734 L 128.02344,255.52734 L 128.02344,256.53516 C 128.34114,256.12371 128.71614,255.81641 129.14844,255.61328 C 129.58072,255.40496 130.06249,255.30079 130.59375,255.30078 C 131.53124,255.30079 132.23176,255.54558 132.69531,256.03516 C 133.16405,256.51954 133.39843,257.25131 133.39844,258.23047 L 133.39844,264.01953 L 131.125,264.01953 L 131.125,258.88672 C 131.12499,258.27735 131.02083,257.84245 130.8125,257.58203 C 130.60937,257.32162 130.27604,257.19141 129.8125,257.19141 C 129.27604,257.19141 128.85156,257.35287 128.53906,257.67578 C 128.22656,257.9935 128.07031,258.42839 128.07031,258.98047 L 128.07031,264.01953 L 125.79688,264.01953 M 106.64844,284.01953 L 106.64844,272.51172 L 109.01563,272.51172 L 109.01563,277.23828 L 113.50781,272.51172 L 116.46875,272.51172 L 111.875,277.16797 L 116.88281,284.01953 L 113.99219,284.01953 L 110.24219,278.75391 L 109.01563,279.97266 L 109.01563,284.01953 L 106.64844,284.01953 M 122.9375,281.44141 L 125.20313,281.44141 C 124.97395,282.33724 124.51041,283.04037 123.8125,283.55078 C 123.11979,284.05599 122.27343,284.30859 121.27344,284.30859 C 120.04427,284.30859 119.07031,283.89714 118.35156,283.07422 C 117.63281,282.2461 117.27344,281.1263 117.27344,279.71484 C 117.27344,278.32422 117.6276,277.22787 118.33594,276.42578 C 119.04427,275.62371 120.01302,275.22267 121.24219,275.22266 C 122.54427,275.22267 123.54947,275.6185 124.25781,276.41016 C 124.96614,277.19662 125.3203,278.31902 125.32031,279.77734 C 125.3203,279.93881 125.3177,280.0612 125.3125,280.14453 C 125.31249,280.22266 125.30728,280.29818 125.29688,280.37109 L 119.625,280.37109 C 119.65625,281.03776 119.81771,281.54037 120.10938,281.87891 C 120.40625,282.21745 120.83073,282.38672 121.38281,282.38672 C 121.77343,282.38672 122.09374,282.3112 122.34375,282.16016 C 122.59374,282.00391 122.79166,281.76433 122.9375,281.44141 M 119.625,278.87891 L 122.96875,278.87891 C 122.94791,278.306 122.79426,277.8711 122.50781,277.57422 C 122.22656,277.27214 121.82031,277.1211 121.28906,277.12109 C 120.79427,277.1211 120.40364,277.27214 120.11719,277.57422 C 119.83593,277.87631 119.67187,278.3112 119.625,278.87891 M 127.16406,287.42578 L 127.16406,285.58984 C 127.23698,285.60026 127.3125,285.60807 127.39063,285.61328 C 127.46875,285.61849 127.57031,285.62109 127.69531,285.62109 C 128.14323,285.62109 128.47916,285.51432 128.70313,285.30078 C 128.92708,285.09245 129.03906,284.77734 129.03906,284.35547 C 129.03906,284.32422 129.03385,284.28516 129.02344,284.23828 C 129.01302,284.19141 129.0026,284.15234 128.99219,284.12109 L 125.92969,275.52734 L 128.42969,275.52734 L 130.21875,281.65234 L 131.96094,275.52734 L 134.35156,275.52734 L 130.85938,285.54297 C 130.59895,286.29297 130.27343,286.80338 129.88281,287.07422 C 129.49218,287.35026 128.90625,287.48828 128.125,287.48828 C 127.98437,287.48828 127.83333,287.48307 127.67188,287.47266 C 127.51041,287.46224 127.34114,287.44661 127.16406,287.42578"
+       id="text5872" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 708.94531,264.01953 L 705.64844,252.51172 L 708.10156,252.51172 L 710.07031,260.62891 L 711.73438,252.51172 L 714.25781,252.51172 L 715.92188,260.62891 L 717.89063,252.51172 L 720.32031,252.51172 L 717.03125,264.01953 L 714.77344,264.01953 L 712.99219,255.20703 L 711.20313,264.01953 L 708.94531,264.01953 M 721.5,254.58203 L 721.5,252.51172 L 723.77344,252.51172 L 723.77344,254.58203 L 721.5,254.58203 M 721.5,264.01953 L 721.5,255.52734 L 723.77344,255.52734 L 723.77344,264.01953 L 721.5,264.01953 M 725.79688,264.01953 L 725.79688,255.52734 L 728.02344,255.52734 L 728.02344,256.53516 C 728.34114,256.12371 728.71614,255.81641 729.14844,255.61328 C 729.58072,255.40496 730.06249,255.30079 730.59375,255.30078 C 731.53124,255.30079 732.23176,255.54558 732.69531,256.03516 C 733.16405,256.51954 733.39843,257.25131 733.39844,258.23047 L 733.39844,264.01953 L 731.125,264.01953 L 731.125,258.88672 C 731.12499,258.27735 731.02083,257.84245 730.8125,257.58203 C 730.60937,257.32162 730.27604,257.19141 729.8125,257.19141 C 729.27604,257.19141 728.85156,257.35287 728.53906,257.67578 C 728.22656,257.9935 728.07031,258.42839 728.07031,258.98047 L 728.07031,264.01953 L 725.79688,264.01953 M 706.64844,284.01953 L 706.64844,272.51172 L 709.01563,272.51172 L 709.01563,277.23828 L 713.50781,272.51172 L 716.46875,272.51172 L 711.875,277.16797 L 716.88281,284.01953 L 713.99219,284.01953 L 710.24219,278.75391 L 709.01563,279.97266 L 709.01563,284.01953 L 706.64844,284.01953 M 722.9375,281.44141 L 725.20313,281.44141 C 724.97395,282.33724 724.51041,283.04037 723.8125,283.55078 C 723.11979,284.05599 722.27343,284.30859 721.27344,284.30859 C 720.04427,284.30859 719.07031,283.89714 718.35156,283.07422 C 717.63281,282.2461 717.27344,281.1263 717.27344,279.71484 C 717.27344,278.32422 717.6276,277.22787 718.33594,276.42578 C 719.04427,275.62371 720.01302,275.22267 721.24219,275.22266 C 722.54427,275.22267 723.54947,275.6185 724.25781,276.41016 C 724.96614,277.19662 725.3203,278.31902 725.32031,279.77734 C 725.3203,279.93881 725.3177,280.0612 725.3125,280.14453 C 725.31249,280.22266 725.30728,280.29818 725.29688,280.37109 L 719.625,280.37109 C 719.65625,281.03776 719.81771,281.54037 720.10938,281.87891 C 720.40625,282.21745 720.83073,282.38672 721.38281,282.38672 C 721.77343,282.38672 722.09374,282.3112 722.34375,282.16016 C 722.59374,282.00391 722.79166,281.76433 722.9375,281.44141 M 719.625,278.87891 L 722.96875,278.87891 C 722.94791,278.306 722.79426,277.8711 722.50781,277.57422 C 722.22656,277.27214 721.82031,277.1211 721.28906,277.12109 C 720.79427,277.1211 720.40364,277.27214 720.11719,277.57422 C 719.83593,277.87631 719.67187,278.3112 719.625,278.87891 M 727.16406,287.42578 L 727.16406,285.58984 C 727.23698,285.60026 727.3125,285.60807 727.39063,285.61328 C 727.46875,285.61849 727.57031,285.62109 727.69531,285.62109 C 728.14323,285.62109 728.47916,285.51432 728.70313,285.30078 C 728.92708,285.09245 729.03906,284.77734 729.03906,284.35547 C 729.03906,284.32422 729.03385,284.28516 729.02344,284.23828 C 729.01302,284.19141 729.0026,284.15234 728.99219,284.12109 L 725.92969,275.52734 L 728.42969,275.52734 L 730.21875,281.65234 L 731.96094,275.52734 L 734.35156,275.52734 L 730.85938,285.54297 C 730.59895,286.29297 730.27343,286.80338 729.88281,287.07422 C 729.49218,287.35026 728.90625,287.48828 728.125,287.48828 C 727.98437,287.48828 727.83333,287.48307 727.67188,287.47266 C 727.51041,287.46224 727.34114,287.44661 727.16406,287.42578"
+       id="text5878" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 759.98438,275.60938 L 759.98438,264.10156 L 763.48438,264.10156 L 765.77344,272.85938 L 768.03125,264.10156 L 771.54688,264.10156 L 771.54688,275.60938 L 769.32813,275.60938 L 769.32813,266.32813 L 766.99219,275.60938 L 764.57031,275.60938 L 762.20313,266.32813 L 762.20313,275.60938 L 759.98438,275.60938 M 778.99219,273.03125 L 781.25781,273.03125 C 781.02864,273.92709 780.5651,274.63021 779.86719,275.14063 C 779.17447,275.64583 778.32812,275.89844 777.32813,275.89844 C 776.09896,275.89844 775.125,275.48698 774.40625,274.66406 C 773.6875,273.83594 773.32812,272.71615 773.32813,271.30469 C 773.32812,269.91407 773.68229,268.81772 774.39063,268.01563 C 775.09896,267.21355 776.06771,266.81251 777.29688,266.8125 C 778.59895,266.81251 779.60416,267.20834 780.3125,268 C 781.02083,268.78647 781.37499,269.90886 781.375,271.36719 C 781.37499,271.52865 781.37239,271.65105 781.36719,271.73438 C 781.36718,271.8125 781.36197,271.88802 781.35156,271.96094 L 775.67969,271.96094 C 775.71093,272.62761 775.87239,273.13021 776.16406,273.46875 C 776.46093,273.80729 776.88541,273.97656 777.4375,273.97656 C 777.82812,273.97656 778.14843,273.90104 778.39844,273.75 C 778.64843,273.59375 778.84635,273.35417 778.99219,273.03125 M 775.67969,270.46875 L 779.02344,270.46875 C 779.0026,269.89584 778.84895,269.46094 778.5625,269.16406 C 778.28124,268.86199 777.87499,268.71094 777.34375,268.71094 C 776.84895,268.71094 776.45833,268.86199 776.17188,269.16406 C 775.89062,269.46615 775.72656,269.90105 775.67969,270.46875 M 782.88281,275.60938 L 782.88281,267.11719 L 785.10938,267.11719 L 785.10938,268.125 C 785.42708,267.71355 785.80208,267.40626 786.23438,267.20313 C 786.66666,266.9948 787.14843,266.89063 787.67969,266.89063 C 788.61718,266.89063 789.3177,267.13543 789.78125,267.625 C 790.24999,268.10938 790.48437,268.84115 790.48438,269.82031 L 790.48438,275.60938 L 788.21094,275.60938 L 788.21094,270.47656 C 788.21093,269.86719 788.10676,269.4323 787.89844,269.17188 C 787.69531,268.91147 787.36197,268.78126 786.89844,268.78125 C 786.36197,268.78126 785.9375,268.94272 785.625,269.26563 C 785.3125,269.58334 785.15625,270.01823 785.15625,270.57031 L 785.15625,275.60938 L 782.88281,275.60938 M 800.01563,267.11719 L 800.01563,275.60938 L 797.78906,275.60938 L 797.78906,274.60156 C 797.46614,275.01302 797.08854,275.32292 796.65625,275.53125 C 796.22916,275.73437 795.74739,275.83594 795.21094,275.83594 C 794.27864,275.83594 793.57812,275.59115 793.10938,275.10156 C 792.64583,274.61198 792.41406,273.88021 792.41406,272.90625 L 792.41406,267.11719 L 794.6875,267.11719 L 794.6875,272.25 C 794.6875,272.85417 794.78906,273.28646 794.99219,273.54688 C 795.19531,273.80209 795.53125,273.92969 796,273.92969 C 796.53124,273.92969 796.95312,273.77084 797.26563,273.45313 C 797.58333,273.13021 797.74218,272.69271 797.74219,272.14063 L 797.74219,267.11719 L 800.01563,267.11719"
+       id="text5884" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 104.41406,17.103516 L 104.41406,10.212891 L 101.74219,10.212891 L 101.74219,8.7949219 L 101.94141,8.7949219 C 102.89453,8.7949367 103.58984,8.6621243 104.02734,8.3964844 C 104.47265,8.1308749 104.73828,7.6894691 104.82422,7.0722656 L 106.59375,7.0722656 L 106.59375,17.103516 L 104.41406,17.103516 M 106.72266,36.369141 L 106.72266,39.826172 L 103.24219,39.826172 L 103.24219,36.369141 L 106.72266,36.369141 M 105.89063,41.173828 L 106.80469,48.978516 L 106.80469,53.630859 L 103.19531,53.630859 L 103.19531,48.978516 L 104.10938,41.173828 L 105.89063,41.173828"
+       id="text5890" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 160.85156,47.103516 C 160.875,46.197273 161.08984,45.431649 161.49609,44.806641 C 161.91015,44.18165 162.63672,43.548838 163.67578,42.908203 C 163.82422,42.822276 164.03125,42.701183 164.29688,42.544922 C 165.74218,41.724621 166.46484,40.931653 166.46484,40.166016 C 166.46484,39.720717 166.32031,39.369155 166.03125,39.111328 C 165.74218,38.85353 165.34375,38.724624 164.83594,38.724609 C 164.27343,38.724624 163.83984,38.88478 163.53516,39.205078 C 163.23047,39.517592 163.07812,39.966811 163.07813,40.552734 L 163.07813,40.646484 L 161.03906,40.646484 C 161.03906,39.498061 161.37891,38.615249 162.05859,37.998047 C 162.73828,37.380876 163.71093,37.072282 164.97656,37.072266 C 166.11718,37.072282 167.02343,37.353532 167.69531,37.916016 C 168.37499,38.470718 168.71484,39.212905 168.71484,40.142578 C 168.71484,40.814466 168.53905,41.39259 168.1875,41.876953 C 167.83593,42.361339 167.14843,42.919933 166.125,43.552734 C 165.89843,43.701182 165.57812,43.896494 165.16406,44.138672 C 164.22656,44.685556 163.69922,45.115243 163.58203,45.427734 L 168.62109,45.427734 L 168.62109,47.103516 L 160.85156,47.103516"
+       id="text5910" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 220.92188,44.033203 L 223.05469,44.033203 C 223.07031,44.603525 223.22265,45.029305 223.51172,45.310547 C 223.80078,45.591805 224.23437,45.73243 224.8125,45.732422 C 225.36718,45.73243 225.79687,45.599617 226.10156,45.333984 C 226.40624,45.068368 226.55859,44.689462 226.55859,44.197266 C 226.55859,43.697276 226.38281,43.322276 226.03125,43.072266 C 225.67968,42.814464 225.15234,42.685558 224.44922,42.685547 L 224.10938,42.685547 L 224.10938,41.291016 L 224.35547,41.291016 C 225.0039,41.291028 225.48046,41.181653 225.78516,40.962891 C 226.09765,40.736341 226.2539,40.392591 226.25391,39.931641 C 226.2539,39.54103 226.12109,39.232436 225.85547,39.005859 C 225.58984,38.771499 225.23437,38.654312 224.78906,38.654297 C 224.29687,38.654312 223.91797,38.787124 223.65234,39.052734 C 223.38672,39.310561 223.2539,39.681655 223.25391,40.166016 L 223.25391,40.236328 L 221.16797,40.236328 C 221.19141,39.212905 221.51953,38.431656 222.15234,37.892578 C 222.79297,37.345719 223.70312,37.072282 224.88281,37.072266 C 225.99218,37.072282 226.86718,37.314469 227.50781,37.798828 C 228.15624,38.283218 228.48046,38.943374 228.48047,39.779297 C 228.48046,40.21681 228.36718,40.603529 228.14063,40.939453 C 227.92187,41.26759 227.59374,41.537121 227.15625,41.748047 C 227.72656,41.974621 228.15624,42.291027 228.44531,42.697266 C 228.74218,43.095714 228.89062,43.564463 228.89063,44.103516 C 228.89062,45.119149 228.52343,45.923836 227.78906,46.517578 C 227.06249,47.103522 226.07031,47.396491 224.8125,47.396484 C 223.57031,47.396491 222.60937,47.107428 221.92969,46.529297 C 221.25781,45.95118 220.92187,45.134774 220.92188,44.080078 L 220.92188,44.033203"
+       id="text5922" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 278.92969,21.685547 C 279.86719,21.037112 280.53125,20.439456 280.92188,19.892578 C 281.32031,19.345707 281.51953,18.75977 281.51953,18.134766 C 281.51953,17.837896 281.47265,17.525397 281.37891,17.197266 C 281.28515,16.861335 281.14843,16.509773 280.96875,16.142578 L 278.90625,16.142578 L 278.90625,14.841797 L 280.17188,14.841797 C 279.82812,14.162119 279.57812,13.556651 279.42188,13.025391 C 279.26562,12.494152 279.1875,11.998059 279.1875,11.537109 C 279.1875,10.146498 279.69531,9.021499 280.71094,8.1621094 C 281.73437,7.3027507 283.08203,6.8730636 284.75391,6.8730469 C 286.5664,6.8730636 287.98827,7.3379069 289.01953,8.2675781 C 290.05077,9.1972801 290.61327,10.517591 290.70703,12.228516 L 287.47266,12.228516 C 287.41015,11.345715 287.15624,10.669935 286.71094,10.201172 C 286.26562,9.7324358 285.65624,9.498061 284.88281,9.4980469 C 284.14843,9.498061 283.58203,9.6894671 283.18359,10.072266 C 282.79296,10.455091 282.59765,11.005872 282.59766,11.724609 C 282.59765,12.138683 282.84375,12.888683 283.33594,13.974609 C 283.50781,14.349619 283.63671,14.638681 283.72266,14.841797 L 287.0625,14.841797 L 287.0625,16.142578 L 284.20313,16.142578 C 284.27343,16.43946 284.32421,16.712898 284.35547,16.962891 C 284.38671,17.212897 284.40234,17.443366 284.40234,17.654297 C 284.40234,18.216802 284.22656,18.779302 283.875,19.341797 C 283.53124,19.896488 282.94531,20.548831 282.11719,21.298828 C 282.625,21.064456 283.08203,20.892581 283.48828,20.783203 C 283.90234,20.666019 284.27734,20.607425 284.61328,20.607422 C 285.01952,20.607425 285.57421,20.701175 286.27734,20.888672 C 286.98046,21.068362 287.48046,21.158206 287.77734,21.158203 C 288.16796,21.158206 288.55077,21.095706 288.92578,20.970703 C 289.30858,20.845706 289.68749,20.6543 290.0625,20.396484 L 291.09375,22.939453 C 290.4453,23.322266 289.82421,23.611328 289.23047,23.806641 C 288.63671,24.009765 288.08202,24.111328 287.56641,24.111328 C 286.97265,24.111328 286.16796,23.955078 285.15234,23.642578 C 284.14453,23.330078 283.41406,23.173829 282.96094,23.173828 C 282.48437,23.173829 282.01953,23.251954 281.56641,23.408203 C 281.12109,23.564453 280.6875,23.798828 280.26563,24.111328 L 278.92969,21.685547 M 284.94141,40.025391 C 284.05859,40.025404 283.29687,40.345716 282.65625,40.986328 C 282.01562,41.626965 281.69531,42.384777 281.69531,43.259766 C 281.69531,44.1504 282.01171,44.912118 282.64453,45.544922 C 283.27734,46.169929 284.04296,46.482429 284.94141,46.482422 C 285.82421,46.482429 286.58202,46.169929 287.21484,45.544922 C 287.85546,44.912118 288.17577,44.1504 288.17578,43.259766 C 288.17577,42.384777 287.85546,41.626965 287.21484,40.986328 C 286.58202,40.345716 285.82421,40.025404 284.94141,40.025391 M 279.65625,36.779297 L 282.05859,39.158203 C 282.48046,38.85353 282.92578,38.626968 283.39453,38.478516 C 283.86328,38.322281 284.37109,38.244156 284.91797,38.244141 C 285.46484,38.244156 285.97655,38.322281 286.45313,38.478516 C 286.93749,38.626968 287.39062,38.85353 287.8125,39.158203 L 290.19141,36.779297 L 291.42188,38.033203 L 289.04297,40.435547 C 289.33983,40.849622 289.56249,41.294934 289.71094,41.771484 C 289.85936,42.240246 289.93358,42.736339 289.93359,43.259766 C 289.93358,43.783213 289.85936,44.279306 289.71094,44.748047 C 289.56249,45.216805 289.33983,45.666024 289.04297,46.095703 L 291.42188,48.498047 L 290.19141,49.716797 L 287.8125,47.337891 C 287.39062,47.650397 286.9414,47.880865 286.46484,48.029297 C 285.98827,48.17774 285.48046,48.251959 284.94141,48.251953 C 284.3789,48.251959 283.85937,48.17774 283.38281,48.029297 C 282.91406,47.880865 282.47265,47.650397 282.05859,47.337891 L 279.65625,49.716797 L 278.4375,48.498047 L 280.80469,46.095703 C 280.50781,45.673836 280.28515,45.23243 280.13672,44.771484 C 279.99609,44.302744 279.92578,43.798838 279.92578,43.259766 C 279.92578,42.736339 279.99609,42.240246 280.13672,41.771484 C 280.28515,41.294934 280.50781,40.849622 280.80469,40.435547 L 278.4375,38.033203 L 279.65625,36.779297"
+       id="text5928" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 352.875,47.701172 C 352.74217,49.662113 351.98436,51.220706 350.60156,52.376953 C 349.22655,53.533203 347.42968,54.111328 345.21094,54.111328 C 342.65624,54.111328 340.66796,53.314453 339.24609,51.720703 C 337.83203,50.126957 337.125,47.892584 337.125,45.017578 C 337.125,42.08009 337.84765,39.830092 339.29297,38.267578 C 340.73828,36.705095 342.8164,35.923846 345.52734,35.923828 C 347.73046,35.923846 349.46874,36.462908 350.74219,37.541016 C 352.02342,38.611343 352.72655,40.126967 352.85156,42.087891 L 349.34766,42.087891 C 349.19921,41.111341 348.80077,40.369154 348.15234,39.861328 C 347.50389,39.345717 346.6289,39.087905 345.52734,39.087891 C 343.96484,39.087905 342.77734,39.591811 341.96484,40.599609 C 341.15234,41.607434 340.74609,43.080089 340.74609,45.017578 C 340.74609,46.892585 341.14843,48.341802 341.95313,49.365234 C 342.76562,50.388675 343.91796,50.900393 345.41016,50.900391 C 346.48827,50.900393 347.37108,50.626956 348.05859,50.080078 C 348.74608,49.525395 349.19139,48.732427 349.39453,47.701172 L 352.875,47.701172"
+       id="text5946" />
+    <path
+       transform="matrix(1.16233,0,-0.444745,0.860341,0,0)"
+       style="font-size:16.72912407px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 307.52845,53.268758 L 317.31434,53.268758 L 317.31434,54.894293 L 307.52845,54.894293 L 307.52845,53.268758 M 307.52845,49.756296 L 317.31434,49.756296 L 317.31434,51.381831 L 307.52845,51.381831 L 307.52845,49.756296"
+       id="text5956" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 411.45117,50.150391 L 411.45117,46.142578 L 408.63867,50.150391 L 411.45117,50.150391 M 411.45117,53.630859 L 411.45117,51.591797 L 406.98633,51.591797 L 406.98633,49.962891 L 410.90039,44.513672 L 413.51367,44.513672 L 413.51367,50.103516 L 414.73242,50.103516 L 414.73242,51.591797 L 413.51367,51.591797 L 413.51367,53.630859 L 411.45117,53.630859 M 398.58398,54.111328 L 408.7793,36.615234 L 410.70117,36.615234 L 400.48242,54.111328 L 398.58398,54.111328 M 397.78711,46.458984 L 397.78711,40.025391 L 395.26758,40.025391 L 395.26758,38.701172 L 395.44336,38.701172 C 396.36523,38.701187 397.0332,38.576187 397.44727,38.326172 C 397.86914,38.076187 398.11914,37.658219 398.19727,37.072266 L 399.88477,37.072266 L 399.88477,46.458984 L 397.78711,46.458984"
+       id="text5960" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 467.0918,53.630859 C 467.11522,52.779298 467.32225,52.064455 467.71289,51.486328 C 468.11131,50.900393 468.80663,50.31055 469.79883,49.716797 C 469.95506,49.630863 470.16991,49.50977 470.44336,49.353516 C 471.7949,48.595708 472.47068,47.861334 472.4707,47.150391 C 472.47068,46.736335 472.33006,46.40821 472.04883,46.166016 C 471.76756,45.923836 471.38475,45.802742 470.90039,45.802734 C 470.36912,45.802742 469.95506,45.95118 469.6582,46.248047 C 469.36913,46.544929 469.22459,46.966804 469.22461,47.513672 L 469.22461,47.607422 L 467.2793,47.607422 C 467.27928,46.529304 467.6035,45.70118 468.25195,45.123047 C 468.90038,44.537118 469.82616,44.24415 471.0293,44.244141 C 472.12303,44.24415 472.99412,44.505868 473.64258,45.029297 C 474.29881,45.552742 474.62693,46.251961 474.62695,47.126953 C 474.62693,47.751959 474.45506,48.294927 474.11133,48.755859 C 473.77537,49.208989 473.11522,49.72852 472.13086,50.314453 C 471.9199,50.439456 471.63084,50.607425 471.26367,50.818359 C 470.34959,51.341799 469.83397,51.744143 469.7168,52.025391 L 474.50977,52.025391 L 474.50977,53.630859 L 467.0918,53.630859 M 458.68945,54.111328 L 468.88477,36.615234 L 470.80664,36.615234 L 460.58789,54.111328 L 458.68945,54.111328 M 457.89258,46.458984 L 457.89258,40.025391 L 455.37305,40.025391 L 455.37305,38.701172 L 455.54883,38.701172 C 456.4707,38.701187 457.13867,38.576187 457.55273,38.326172 C 457.97461,38.076187 458.22461,37.658219 458.30273,37.072266 L 459.99023,37.072266 L 459.99023,46.458984 L 457.89258,46.458984"
+       id="text5967" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 531.83203,50.150391 L 531.83203,46.142578 L 529.01953,50.150391 L 531.83203,50.150391 M 531.83203,53.630859 L 531.83203,51.591797 L 527.36719,51.591797 L 527.36719,49.962891 L 531.28125,44.513672 L 533.89453,44.513672 L 533.89453,50.103516 L 535.11328,50.103516 L 535.11328,51.591797 L 533.89453,51.591797 L 533.89453,53.630859 L 531.83203,53.630859 M 518.96484,54.111328 L 529.16016,36.615234 L 531.08203,36.615234 L 520.86328,54.111328 L 518.96484,54.111328 M 514.88672,43.599609 L 516.89063,43.599609 C 516.91406,44.130869 517.0625,44.529306 517.33594,44.794922 C 517.61718,45.052743 518.03125,45.181649 518.57813,45.181641 C 519.10937,45.181649 519.51953,45.060555 519.80859,44.818359 C 520.09765,44.568368 520.24218,44.208994 520.24219,43.740234 C 520.24218,43.271495 520.07421,42.919933 519.73828,42.685547 C 519.40234,42.443371 518.90625,42.322277 518.25,42.322266 C 518.20312,42.322277 518.14453,42.326183 518.07422,42.333984 C 518.0039,42.341808 517.94922,42.345714 517.91016,42.345703 L 517.91016,41.033203 L 518.14453,41.033203 C 518.76171,41.033216 519.21484,40.931653 519.50391,40.728516 C 519.80078,40.517591 519.94921,40.193373 519.94922,39.755859 C 519.94921,39.388686 519.82421,39.099624 519.57422,38.888672 C 519.32421,38.669937 518.98437,38.560562 518.55469,38.560547 C 518.08593,38.560562 517.72265,38.685562 517.46484,38.935547 C 517.21484,39.177749 517.08984,39.525405 517.08984,39.978516 L 517.08984,40.048828 L 515.08594,40.048828 C 515.10156,39.087905 515.41797,38.353531 516.03516,37.845703 C 516.65234,37.330094 517.52343,37.072282 518.64844,37.072266 C 519.70312,37.072282 520.53906,37.302751 521.15625,37.763672 C 521.77343,38.216812 522.08202,38.833999 522.08203,39.615234 C 522.08202,40.02931 521.97655,40.392591 521.76563,40.705078 C 521.55468,41.009778 521.23827,41.263684 520.81641,41.466797 C 521.36327,41.677746 521.77343,41.970715 522.04688,42.345703 C 522.32812,42.712902 522.46874,43.154307 522.46875,43.669922 C 522.46874,44.607431 522.11718,45.349618 521.41406,45.896484 C 520.71874,46.443367 519.77343,46.716804 518.57813,46.716797 C 517.39062,46.716804 516.47656,46.451179 515.83594,45.919922 C 515.20312,45.380868 514.88672,44.615243 514.88672,43.623047 L 514.88672,43.599609"
+       id="text5973" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 586.63477,39.404297 L 586.63477,42.498047 L 583.36523,42.498047 L 583.36523,39.474609 C 583.36523,38.482437 583.66992,37.654313 584.2793,36.990234 C 584.88867,36.326189 585.67382,35.970721 586.63477,35.923828 L 586.63477,37.119141 C 586.04101,37.259782 585.59961,37.509782 585.31055,37.869141 C 585.02148,38.220719 584.87695,38.681656 584.87695,39.251953 L 584.87695,39.404297 L 586.63477,39.404297"
+       id="text5979" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 643.36523,39.474609 L 643.36523,36.369141 L 646.63477,36.369141 L 646.63477,39.427734 C 646.63476,40.412123 646.33007,41.240247 645.7207,41.912109 C 645.11132,42.576183 644.32617,42.931651 643.36523,42.978516 L 643.36523,41.771484 C 643.95898,41.630871 644.39648,41.384778 644.67773,41.033203 C 644.96679,40.673841 645.11132,40.201185 645.11133,39.615234 L 645.11133,39.474609 L 643.36523,39.474609"
+       id="text5985" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 706.89258,53.630859 L 703.50586,53.630859 L 703.50586,47.560547 L 703.27148,47.150391 L 698.00977,47.150391 L 698.00977,45.826172 L 702.49805,45.826172 L 701.64258,44.337891 L 698.00977,44.337891 L 698.00977,43.025391 L 700.86914,43.025391 L 697.61133,37.330078 L 701.41992,37.330078 L 705.19336,44.724609 L 708.69727,37.330078 L 712.27148,37.330078 L 709.27148,43.025391 L 712.00195,43.025391 L 712.00195,44.337891 L 708.58008,44.337891 L 707.7832,45.826172 L 712.00195,45.826172 L 712.00195,47.150391 L 707.0918,47.150391 L 706.89258,47.560547 L 706.89258,53.630859"
+       id="text5991" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 764.97656,19.306641 C 765.46093,19.306645 765.8789,19.482426 766.23047,19.833984 C 766.58202,20.18555 766.7578,20.603519 766.75781,21.087891 C 766.7578,21.564455 766.58202,21.974611 766.23047,22.318359 C 765.8789,22.66211 765.46093,22.833985 764.97656,22.833984 C 764.48437,22.833985 764.06249,22.666017 763.71094,22.330078 C 763.36718,21.994142 763.1953,21.58008 763.19531,21.087891 C 763.1953,20.595706 763.36718,20.177738 763.71094,19.833984 C 764.06249,19.482426 764.48437,19.306645 764.97656,19.306641 M 757.94531,15.298828 L 771.98438,15.298828 L 771.98438,17.630859 L 757.94531,17.630859 L 757.94531,15.298828 M 764.97656,10.095703 C 765.46093,10.095717 765.8789,10.271498 766.23047,10.623047 C 766.58202,10.96681 766.7578,11.380872 766.75781,11.865234 C 766.7578,12.357433 766.58202,12.779308 766.23047,13.130859 C 765.88671,13.47462 765.46874,13.646494 764.97656,13.646484 C 764.48437,13.646494 764.06249,13.47462 763.71094,13.130859 C 763.36718,12.779308 763.1953,12.357433 763.19531,11.865234 C 763.1953,11.373059 763.36718,10.955091 763.71094,10.611328 C 764.06249,10.267591 764.48437,10.095717 764.97656,10.095703 M 759.84375,39.544922 L 765.11719,44.818359 L 770.40234,39.544922 L 772.05469,41.173828 L 766.78125,46.482422 L 772.05469,51.755859 L 770.40234,53.396484 L 765.11719,48.111328 L 759.84375,53.396484 L 758.20313,51.755859 L 763.48828,46.482422 L 758.20313,41.173828 L 759.84375,39.544922"
+       id="text5997" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 134.9707,69.826172 L 132.58008,77.173828 L 137.37305,77.173828 L 134.9707,69.826172 M 132.9082,66.369141 L 137.00977,66.369141 L 143.23242,83.630859 L 139.50586,83.630859 L 138.33398,80.080078 L 131.64258,80.080078 L 130.50586,83.630859 L 126.76758,83.630859 L 132.9082,66.369141 M 135.70898,64.166016 L 135.70898,61.283203 L 138.35742,61.283203 L 138.35742,64.166016 L 135.70898,64.166016 M 131.63086,64.166016 L 131.63086,61.283203 L 134.2793,61.283203 L 134.2793,64.166016 L 131.63086,64.166016"
+       id="text6003" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 194.9707,62.126953 C 194.5957,62.126975 194.27538,62.267599 194.00977,62.548828 C 193.74413,62.822286 193.61132,63.154317 193.61133,63.544922 C 193.61132,63.927754 193.74023,64.251973 193.99805,64.517578 C 194.26366,64.783222 194.58788,64.916034 194.9707,64.916016 C 195.36132,64.916034 195.69335,64.783222 195.9668,64.517578 C 196.24804,64.24416 196.38866,63.919942 196.38867,63.544922 C 196.38866,63.16213 196.24804,62.830099 195.9668,62.548828 C 195.69335,62.267599 195.36132,62.126975 194.9707,62.126953 M 194.9707,60.521484 C 195.81444,60.521507 196.52929,60.814476 197.11523,61.400391 C 197.70116,61.978537 197.99413,62.685568 197.99414,63.521484 C 197.99413,64.357441 197.70116,65.068378 197.11523,65.654297 C 196.52929,66.232439 195.81444,66.521501 194.9707,66.521484 C 194.13476,66.521501 193.42773,66.232439 192.84961,65.654297 C 192.27929,65.07619 191.99414,64.365254 191.99414,63.521484 C 191.99414,62.677755 192.27929,61.966819 192.84961,61.388672 C 193.42773,60.81057 194.13476,60.521507 194.9707,60.521484 M 192.7207,67.072266 L 197.23242,67.072266 L 203.23242,83.630859 L 199.50586,83.630859 L 198.33398,80.080078 L 191.64258,80.080078 L 190.50586,83.630859 L 186.76758,83.630859 L 192.7207,67.072266 M 194.9707,69.826172 L 192.58008,77.173828 L 197.37305,77.173828 L 194.9707,69.826172"
+       id="text6007" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 248.52539,83.630859 L 248.52539,66.369141 L 261.05273,66.369141 L 261.05273,69.369141 L 252.0293,69.369141 L 252.0293,73.048828 L 260.2793,73.048828 L 260.2793,76.001953 L 252.0293,76.001953 L 252.0293,80.443359 L 261.47461,80.443359 L 261.47461,83.630859 L 248.52539,83.630859 M 258.24023,60.521484 L 254.57227,64.857422 L 252.9082,64.857422 L 255.2168,60.521484 L 258.24023,60.521484"
+       id="text6011" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 313.72266,101.49056 L 313.72266,104.29134 L 314.88281,104.29134 C 315.5703,104.29135 316.07421,104.18198 316.39453,103.96322 C 316.71483,103.74448 316.87499,103.40073 316.875,102.93197 C 316.87499,102.43979 316.70311,102.07651 316.35938,101.84212 C 316.01561,101.60776 315.48436,101.49057 314.76563,101.49056 L 313.72266,101.49056 M 311.37891,100.00228 L 315.16406,100.00228 C 316.53905,100.00229 317.5703,100.23667 318.25781,100.70541 C 318.95311,101.16636 319.30077,101.85776 319.30078,102.77962 C 319.30077,103.42026 319.11327,103.96713 318.73828,104.42025 C 318.36327,104.87338 317.84374,105.18198 317.17969,105.34603 L 319.34766,109.67025 L 316.72266,109.67025 L 314.88281,105.70931 L 313.72266,105.70931 L 313.72266,109.67025 L 311.37891,109.67025 L 311.37891,100.00228 M 315,97.717125 C 314.0078,97.717141 313.08593,97.892922 312.23438,98.244469 C 311.38281,98.588234 310.61718,99.099952 309.9375,99.779625 C 309.22656,100.49058 308.67968,101.29917 308.29688,102.20541 C 307.91406,103.10385 307.72265,104.03354 307.72266,104.99447 C 307.72265,105.96323 307.90234,106.8851 308.26172,107.76009 C 308.62109,108.62729 309.14062,109.40072 309.82031,110.08041 C 310.51562,110.79135 311.30859,111.33822 312.19922,111.72103 C 313.08984,112.09603 314.01562,112.28353 314.97656,112.28353 C 315.91405,112.28353 316.82421,112.09994 317.70703,111.73275 C 318.59764,111.36556 319.40624,110.83822 320.13281,110.15072 C 320.81248,109.49447 321.33983,108.72885 321.71484,107.85384 C 322.08983,106.97885 322.27733,106.0726 322.27734,105.13509 C 322.27733,104.09604 322.10155,103.13901 321.75,102.264 C 321.40623,101.38901 320.89061,100.60386 320.20313,99.908531 C 319.49999,99.181983 318.70702,98.635109 317.82422,98.267906 C 316.94921,97.900734 316.0078,97.717141 315,97.717125 M 314.97656,96.275719 C 316.17968,96.275736 317.31249,96.502298 318.375,96.955406 C 319.4453,97.400735 320.39842,98.049172 321.23438,98.900719 C 322.03905,99.713233 322.65233,100.64292 323.07422,101.68978 C 323.49608,102.73667 323.70701,103.84604 323.70703,105.01791 C 323.70701,106.20541 323.48826,107.33041 323.05078,108.39291 C 322.61326,109.4476 321.97655,110.37728 321.14063,111.18197 C 320.30467,112.00228 319.35155,112.63119 318.28125,113.06869 C 317.21874,113.50619 316.11718,113.72494 314.97656,113.72494 C 313.81249,113.72494 312.69921,113.49838 311.63672,113.04525 C 310.57421,112.59213 309.625,111.93978 308.78906,111.08822 C 307.97656,110.26791 307.35547,109.33822 306.92578,108.29916 C 306.5039,107.25229 306.29297,106.15854 306.29297,105.01791 C 306.29297,104.22104 306.39844,103.4476 306.60938,102.69759 C 306.82031,101.93979 307.13672,101.20151 307.55859,100.48275 C 308.34765,99.154639 309.39062,98.12339 310.6875,97.389 C 311.98437,96.646829 313.41405,96.275736 314.97656,96.275719"
+       id="text6015" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 372.0293,69.064453 L 376.06055,69.064453 C 377.84179,69.064468 379.18944,69.505874 380.10352,70.388672 C 381.01756,71.263684 381.47459,72.556652 381.47461,74.267578 C 381.47459,75.939461 381.02538,77.228522 380.12695,78.134766 C 379.23632,79.033208 377.95897,79.482426 376.29492,79.482422 L 372.0293,79.482422 L 372.0293,83.630859 L 368.52539,83.630859 L 368.52539,66.369141 L 372.0293,66.369141 L 372.0293,69.064453 M 372.05273,76.599609 L 375.47461,76.599609 C 376.4121,76.599616 377.09179,76.416023 377.51367,76.048828 C 377.93554,75.673836 378.14647,75.080087 378.14648,74.267578 C 378.14647,73.509776 377.93554,72.939464 377.51367,72.556641 C 377.09179,72.166027 376.47069,71.970715 375.65039,71.970703 L 372.05273,71.970703 L 372.05273,76.599609"
+       id="text6019" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 428.08594,66.322266 L 431.67188,66.322266 L 431.67188,77.150391 C 431.67187,78.486333 431.93749,79.462895 432.46875,80.080078 C 432.99999,80.689456 433.84374,80.994143 435,80.994141 C 436.17187,80.994143 437.02343,80.689456 437.55469,80.080078 C 438.09374,79.470707 438.36327,78.494146 438.36328,77.150391 L 438.36328,66.322266 L 441.91406,66.322266 L 441.91406,77.537109 C 441.91405,79.654301 441.3203,81.279299 440.13281,82.412109 C 438.95311,83.544922 437.24999,84.111328 435.02344,84.111328 C 432.78124,84.111328 431.0625,83.548828 429.86719,82.423828 C 428.67969,81.291018 428.08594,79.662113 428.08594,77.537109 L 428.08594,66.322266 M 435.73828,64.166016 L 435.73828,61.283203 L 438.38672,61.283203 L 438.38672,64.166016 L 435.73828,64.166016 M 431.66016,64.166016 L 431.66016,61.283203 L 434.30859,61.283203 L 434.30859,64.166016 L 431.66016,64.166016"
+       id="text6023" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 488.08594,66.105469 L 491.67188,66.105469 L 491.67188,76.933594 C 491.67187,78.269536 491.93749,79.246098 492.46875,79.863281 C 492.99999,80.472659 493.84374,80.777346 495,80.777344 C 496.17187,80.777346 497.02343,80.472659 497.55469,79.863281 C 498.09374,79.25391 498.36327,78.277349 498.36328,76.933594 L 498.36328,66.105469 L 501.91406,66.105469 L 501.91406,77.320313 C 501.91405,79.437504 501.3203,81.062502 500.13281,82.195313 C 498.95311,83.328125 497.24999,83.894531 495.02344,83.894531 C 492.78124,83.894531 491.0625,83.332031 489.86719,82.207031 C 488.67969,81.074221 488.08594,79.445316 488.08594,77.320313 L 488.08594,66.105469 M 498.45703,60.304688 L 494.78906,64.640625 L 493.125,64.640625 L 495.43359,60.304688 L 498.45703,60.304688"
+       id="text6029" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 552.43945,83.630859 L 552.43945,66.369141 L 555.99023,66.369141 L 555.99023,83.630859 L 552.43945,83.630859 M 557.66602,60.521484 L 553.99805,64.857422 L 552.33398,64.857422 L 554.64258,60.521484 L 557.66602,60.521484"
+       id="text6033" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 610.18359,75 C 610.18359,76.898444 610.60546,78.375005 611.44922,79.429688 C 612.29296,80.476566 613.47265,81.000003 614.98828,81 C 616.51952,81.000003 617.71093,80.476566 618.5625,79.429688 C 619.41405,78.375005 619.83983,76.898444 619.83984,75 C 619.83983,73.101573 619.41405,71.628918 618.5625,70.582031 C 617.71093,69.527358 616.51952,69.000015 614.98828,69 C 613.47265,69.000015 612.29296,69.523452 611.44922,70.570313 C 610.60546,71.617199 610.18359,73.093761 610.18359,75 M 606.5625,75 C 606.5625,72.210949 607.32031,70.000014 608.83594,68.367188 C 610.35937,66.726579 612.41015,65.906268 614.98828,65.90625 C 617.56639,65.906268 619.61717,66.726579 621.14063,68.367188 C 622.67186,70.007826 623.43748,72.218761 623.4375,75 C 623.43748,77.781256 622.67186,79.992191 621.14063,81.632813 C 619.61717,83.273438 617.56639,84.09375 614.98828,84.09375 C 612.41015,84.09375 610.35937,83.273438 608.83594,81.632813 C 607.32031,79.992191 606.5625,77.781256 606.5625,75 M 618.44531,60.503906 L 614.77734,64.839844 L 613.11328,64.839844 L 615.42188,60.503906 L 618.44531,60.503906"
+       id="text6037" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 670.18359,75.017578 C 670.18359,76.916022 670.60546,78.392583 671.44922,79.447266 C 672.29296,80.494144 673.47265,81.017581 674.98828,81.017578 C 676.51952,81.017581 677.71093,80.494144 678.5625,79.447266 C 679.41405,78.392583 679.83983,76.916022 679.83984,75.017578 C 679.83983,73.119151 679.41405,71.646496 678.5625,70.599609 C 677.71093,69.544936 676.51952,69.017593 674.98828,69.017578 C 673.47265,69.017593 672.29296,69.54103 671.44922,70.587891 C 670.60546,71.634778 670.18359,73.111339 670.18359,75.017578 M 666.5625,75.017578 C 666.5625,72.228527 667.32031,70.017592 668.83594,68.384766 C 670.35937,66.744158 672.41015,65.923846 674.98828,65.923828 C 677.56639,65.923846 679.61717,66.744158 681.14063,68.384766 C 682.67186,70.025404 683.43748,72.23634 683.4375,75.017578 C 683.43748,77.798834 682.67186,80.009769 681.14063,81.650391 C 679.61717,83.291016 677.56639,84.111328 674.98828,84.111328 C 672.41015,84.111328 670.35937,83.291016 668.83594,81.650391 C 667.32031,80.009769 666.5625,77.798834 666.5625,75.017578 M 675.72656,64.166016 L 675.72656,61.283203 L 678.375,61.283203 L 678.375,64.166016 L 675.72656,64.166016 M 671.64844,64.166016 L 671.64844,61.283203 L 674.29688,61.283203 L 674.29688,64.166016 L 671.64844,64.166016"
+       id="text6041" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 735.5332,106.35352 L 735.5332,103.35352 L 739.44727,99.966797 L 739.44727,102.75586 L 737.04492,104.8418 L 739.44727,106.92773 L 739.44727,109.74023 L 735.5332,106.35352 M 730.4707,106.35352 L 730.4707,103.35352 L 734.4082,99.966797 L 734.4082,102.75586 L 732.00586,104.8418 L 734.4082,106.92773 L 734.4082,109.74023 L 730.4707,106.35352"
+       id="text6045" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 799.44727,103.3418 L 799.44727,106.3418 L 795.5332,109.72852 L 795.5332,106.93945 L 797.93555,104.83008 L 795.5332,102.76758 L 795.5332,99.955078 L 799.44727,103.3418 M 794.4082,103.3418 L 794.4082,106.3418 L 790.4707,109.72852 L 790.4707,106.93945 L 792.86133,104.83008 L 790.4707,102.76758 L 790.4707,99.955078 L 794.4082,103.3418"
+       id="text6051" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 883.81641,76.535881 L 886.23047,76.535881 L 886.23047,85.418694 L 883.81641,85.418694 L 883.81641,76.535881 M 883.81641,64.535881 L 886.23047,64.535881 L 886.23047,73.418694 L 883.81641,73.418694 L 883.81641,64.535881 M 877.98047,101.19213 L 892.01953,101.19213 L 892.01953,107.07494 L 889.6875,107.07494 L 889.6875,103.48901 L 877.98047,103.48901 L 877.98047,101.19213"
+       id="text6057" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 149.9707,129.82617 L 147.58008,137.17383 L 152.37305,137.17383 L 149.9707,129.82617 M 147.9082,126.36914 L 152.00977,126.36914 L 158.23242,143.63086 L 154.50586,143.63086 L 153.33398,140.08008 L 146.64258,140.08008 L 145.50586,143.63086 L 141.76758,143.63086 L 147.9082,126.36914 M 153.42773,120.52148 L 149.75977,124.85742 L 148.0957,124.85742 L 150.4043,120.52148 L 153.42773,120.52148"
+       id="text6065" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 211.40625,137.91797 C 211.71874,137.73829 211.95312,137.53907 212.10938,137.32031 C 212.26562,137.10157 212.34374,136.86719 212.34375,136.61719 C 212.34374,136.31251 212.2539,136.0547 212.07422,135.84375 C 211.89452,135.62501 211.52343,135.3711 210.96094,135.08203 L 207.85547,133.47656 C 207.55078,133.65626 207.3164,133.85938 207.15234,134.08594 C 206.99609,134.31251 206.91797,134.5547 206.91797,134.8125 C 206.91797,135.1172 207.03125,135.38673 207.25781,135.62109 C 207.49218,135.84766 208.0039,136.16407 208.79297,136.57031 L 211.40625,137.91797 M 205.03125,141.75 L 207.92578,141.75 C 207.98828,142.35938 208.16796,142.8125 208.46484,143.10938 C 208.76953,143.40625 209.19921,143.55469 209.75391,143.55469 C 210.26952,143.55469 210.67968,143.43359 210.98438,143.19141 C 211.28905,142.94141 211.4414,142.60547 211.44141,142.18359 C 211.4414,141.83985 211.32812,141.54297 211.10156,141.29297 C 210.87499,141.03516 210.42577,140.74219 209.75391,140.41406 L 206.95313,138.99609 C 206.0625,138.55079 205.39844,138.03907 204.96094,137.46094 C 204.52344,136.88282 204.30469,136.23438 204.30469,135.51563 C 204.30469,134.82032 204.47266,134.21095 204.80859,133.6875 C 205.15234,133.15626 205.65625,132.71485 206.32031,132.36328 C 205.92969,132.01173 205.64062,131.62892 205.45313,131.21484 C 205.26562,130.79298 205.17187,130.32814 205.17188,129.82031 C 205.17187,128.64845 205.57422,127.70705 206.37891,126.99609 C 207.18359,126.27736 208.2539,125.91799 209.58984,125.91797 C 210.96484,125.91799 212.04296,126.26955 212.82422,126.97266 C 213.60546,127.6758 214.0078,128.64845 214.03125,129.89063 L 211.26563,129.89063 C 211.24999,129.3672 211.09374,128.96876 210.79688,128.69531 C 210.50781,128.42189 210.08984,128.28517 209.54297,128.28516 C 209.05859,128.28517 208.68359,128.39064 208.41797,128.60156 C 208.16015,128.81251 208.03125,129.10939 208.03125,129.49219 C 208.03125,129.8047 208.18359,130.09767 208.48828,130.37109 C 208.80078,130.63673 209.35937,130.95704 210.16406,131.33203 L 212.13281,132.24609 C 213.1328,132.72267 213.87108,133.25392 214.34766,133.83984 C 214.82421,134.41798 215.06249,135.08595 215.0625,135.84375 C 215.06249,136.55469 214.8828,137.17579 214.52344,137.70703 C 214.17186,138.23047 213.66405,138.63672 213,138.92578 C 213.45312,139.32422 213.79296,139.76563 214.01953,140.25 C 214.24608,140.73438 214.35936,141.26563 214.35938,141.84375 C 214.35936,143.04688 213.92968,144.03906 213.07031,144.82031 C 212.21093,145.60937 211.10546,146.0039 209.75391,146.00391 C 208.26953,146.0039 207.1289,145.64453 206.33203,144.92578 C 205.53515,144.20703 205.10156,143.14844 205.03125,141.75 M 203.97656,173.625 L 203.97656,160.59375 C 203.97656,159.29689 204.48047,158.25002 205.48828,157.45313 C 206.49609,156.64845 207.83984,156.24611 209.51953,156.24609 C 211.23046,156.24611 212.5703,156.63674 213.53906,157.41797 C 214.5078,158.19923 214.99217,159.27345 214.99219,160.64063 C 214.99217,161.48439 214.84764,162.17579 214.55859,162.71484 C 214.27733,163.25392 213.83983,163.66798 213.24609,163.95703 C 214.16796,164.32423 214.85936,164.86329 215.32031,165.57422 C 215.78905,166.28516 216.02342,167.16016 216.02344,168.19922 C 216.02342,169.94922 215.51952,171.36328 214.51172,172.44141 C 213.5039,173.51953 212.18358,174.05859 210.55078,174.05859 C 210.32421,174.05859 210.0703,174.04687 209.78906,174.02344 C 209.51562,174 209.21874,173.96484 208.89844,173.91797 L 208.89844,171.17578 C 208.99999,171.19141 209.10156,171.20313 209.20313,171.21094 C 209.31249,171.21875 209.47265,171.22266 209.68359,171.22266 C 210.60546,171.22266 211.3164,170.96875 211.81641,170.46094 C 212.3164,169.94532 212.5664,169.21485 212.56641,168.26953 C 212.5664,167.35548 212.29296,166.66016 211.74609,166.18359 C 211.20702,165.70704 210.41796,165.46876 209.37891,165.46875 L 209.0625,165.46875 L 209.07422,163.06641 C 209.12109,163.07423 209.17187,163.08204 209.22656,163.08984 C 209.28124,163.08985 209.36327,163.08985 209.47266,163.08984 C 210.16796,163.08985 210.6953,162.91798 211.05469,162.57422 C 211.42187,162.22267 211.60546,161.71486 211.60547,161.05078 C 211.60546,160.38673 211.41405,159.88283 211.03125,159.53906 C 210.65624,159.18751 210.10546,159.01173 209.37891,159.01172 C 208.70703,159.01173 208.19531,159.20705 207.84375,159.59766 C 207.49218,159.98048 207.3164,160.54298 207.31641,161.28516 L 207.31641,173.625 L 203.97656,173.625"
+       id="text6073" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 267.09961,140.51367 L 269.94727,140.51367 C 271.60351,140.51367 272.80272,140.08008 273.54492,139.21289 C 274.2871,138.34571 274.65819,136.94727 274.6582,135.01758 C 274.65819,133.09571 274.31053,131.68165 273.61523,130.77539 C 272.92772,129.86134 271.8496,129.40431 270.38086,129.4043 L 267.09961,129.4043 L 267.09961,133.23633 L 270.88477,133.23633 L 270.88477,135.47461 L 267.09961,135.47461 L 267.09961,140.51367 M 263.61914,143.63086 L 263.61914,135.47461 L 261.74414,135.47461 L 261.74414,133.23633 L 263.61914,133.23633 L 263.61914,126.36914 L 270.4043,126.36914 C 273.04491,126.36916 275.01366,127.084 276.31055,128.51367 C 277.60741,129.93556 278.25584,132.10353 278.25586,135.01758 C 278.25584,136.60352 278.01756,137.99805 277.54102,139.20117 C 277.07225,140.4043 276.38084,141.36914 275.4668,142.0957 C 274.77928,142.64258 273.99413,143.03711 273.11133,143.2793 C 272.23632,143.51367 271.00585,143.63086 269.41992,143.63086 L 263.61914,143.63086"
+       id="text6077" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 626.72461,139.55273 C 627.17773,140.04493 627.68945,140.41211 628.25977,140.6543 C 628.83007,140.89649 629.47069,141.01758 630.18164,141.01758 C 631.71288,141.01758 632.90428,140.49414 633.75586,139.44727 C 634.60741,138.39258 635.03319,136.91602 635.0332,135.01758 C 635.03319,134.24415 634.96288,133.54493 634.82227,132.91992 C 634.68163,132.28712 634.4785,131.73634 634.21289,131.26758 L 626.72461,139.55273 M 625.98633,138.36914 L 633.39258,130.21289 C 632.9785,129.81447 632.50585,129.51759 631.97461,129.32227 C 631.44335,129.11916 630.84569,129.01759 630.18164,129.01758 C 628.66601,129.01759 627.48632,129.54103 626.64258,130.58789 C 625.79882,131.63478 625.37695,133.11134 625.37695,135.01758 C 625.37695,135.72071 625.42382,136.34571 625.51758,136.89258 C 625.61914,137.43946 625.77539,137.93165 625.98633,138.36914 M 621.36914,143.36133 L 623.51367,140.9707 C 622.91992,140.16602 622.47851,139.27149 622.18945,138.28711 C 621.90039,137.29493 621.75586,136.20509 621.75586,135.01758 C 621.75586,132.22853 622.51367,130.01759 624.0293,128.38477 C 625.55273,126.74416 627.60351,125.92385 630.18164,125.92383 C 631.28319,125.92385 632.27147,126.06447 633.14648,126.3457 C 634.02928,126.62697 634.84178,127.06056 635.58398,127.64648 L 637.30664,125.70117 L 638.45508,126.73242 L 636.63867,128.70117 C 637.30272,129.5215 637.79881,130.45509 638.12695,131.50195 C 638.46287,132.54884 638.63084,133.72071 638.63086,135.01758 C 638.63084,137.79883 637.86912,140.00977 636.3457,141.65039 C 634.82225,143.29102 632.76757,144.11133 630.18164,144.11133 C 629.01757,144.11133 627.96679,143.94727 627.0293,143.61914 C 626.0996,143.29102 625.26367,142.79102 624.52148,142.11914 L 622.50586,144.4043 L 621.36914,143.36133"
+       id="text6081" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 690,127.98633 C 689.42968,127.98634 688.9414,128.18556 688.53516,128.58398 C 688.13672,128.98244 687.9375,129.4629 687.9375,130.02539 C 687.9375,130.60353 688.13672,131.09181 688.53516,131.49023 C 688.93359,131.88868 689.42187,132.0879 690,132.08789 C 690.5625,132.0879 691.04296,131.88478 691.44141,131.47852 C 691.83984,131.07228 692.03906,130.5879 692.03906,130.02539 C 692.03906,129.4629 691.83984,128.98244 691.44141,128.58398 C 691.04296,128.18556 690.5625,127.98634 690,127.98633 M 690,126.47461 C 690.98437,126.47463 691.82031,126.82619 692.50781,127.5293 C 693.20312,128.22462 693.55077,129.06447 693.55078,130.04883 C 693.55077,131.0254 693.20312,131.86134 692.50781,132.55664 C 691.81249,133.25196 690.96875,133.59962 689.97656,133.59961 C 688.99218,133.59962 688.15625,133.25587 687.46875,132.56836 C 686.78906,131.88087 686.44922,131.04103 686.44922,130.04883 C 686.44922,129.05666 686.79297,128.21291 687.48047,127.51758 C 688.17578,126.82228 689.01562,126.47463 690,126.47461 M 695.51953,156.29883 L 695.51953,157.59961 L 694.19531,157.59961 L 694.19531,173.63086 L 692.42578,173.63086 L 692.42578,157.59961 L 690.57422,157.59961 L 690.57422,173.63086 L 688.78125,173.63086 L 688.78125,164.44336 C 687.47656,164.39649 686.43359,164.00196 685.65234,163.25977 C 684.87109,162.51759 684.48047,161.56056 684.48047,160.38867 C 684.48047,159.15431 684.89844,158.16603 685.73438,157.42383 C 686.57031,156.67385 687.67968,156.29885 689.0625,156.29883 L 695.51953,156.29883"
+       id="text6085" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 373.13672,6.5214844 L 376.08984,6.5214844 L 381.72656,13.095703 L 378.97266,13.095703 L 374.625,8.7480469 L 370.25391,13.095703 L 367.5,13.095703 L 373.13672,6.5214844"
+       id="text6091" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 750.67969,128.67773 L 750.67969,125.79492 L 753.32813,125.79492 L 753.32813,128.67773 L 750.67969,128.67773 M 746.60156,128.67773 L 746.60156,125.79492 L 749.25,125.79492 L 749.25,128.67773 L 746.60156,128.67773 M 753.39844,155.0332 L 749.73047,159.36914 L 748.06641,159.36914 L 750.375,155.0332 L 753.39844,155.0332"
+       id="text6099" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 171.07031,197.29102 L 175.92188,197.29102 L 175.92188,189.29883 L 173.97656,189.29883 L 171.07031,197.29102 M 165,203.63086 L 171.80859,186.36914 L 187.81641,186.36914 L 187.81641,189.36914 L 179.34375,189.36914 L 179.34375,193.04883 L 187.05469,193.04883 L 187.05469,196.00195 L 179.34375,196.00195 L 179.34375,200.44336 L 188.25,200.44336 L 188.25,203.63086 L 175.92188,203.63086 L 175.92188,200.08008 L 170.0625,200.08008 L 168.76172,203.63086 L 165,203.63086"
+       id="text6105" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 300.46875,193.23633 C 300.32031,193.22071 300.20312,193.20899 300.11719,193.20117 C 300.03906,193.19337 299.96484,193.18946 299.89453,193.18945 C 299.05859,193.18946 298.42578,193.53321 297.99609,194.2207 C 297.5664,194.90821 297.35156,195.92384 297.35156,197.26758 C 297.35156,198.04102 297.4375,198.70899 297.60938,199.27148 C 297.78906,199.83399 298.04687,200.28711 298.38281,200.63086 L 300.46875,193.23633 M 296.68359,206.49023 L 297.48047,203.63086 C 296.30859,203.13867 295.42187,202.35352 294.82031,201.27539 C 294.21875,200.19727 293.91797,198.85352 293.91797,197.24414 C 293.91797,195.11134 294.45312,193.43946 295.52344,192.22852 C 296.60156,191.01759 298.07421,190.41212 299.94141,190.41211 C 300.15234,190.41212 300.35937,190.41994 300.5625,190.43555 C 300.76562,190.45119 300.96874,190.47462 301.17188,190.50586 L 301.69922,188.56055 L 302.97656,188.56055 L 302.34375,190.78711 C 303.32811,191.09181 304.09765,191.63478 304.65234,192.41602 C 305.20702,193.18946 305.52733,194.17774 305.61328,195.38086 L 302.32031,195.36914 C 302.28124,194.98634 302.1914,194.65821 302.05078,194.38477 C 301.91796,194.10353 301.72265,193.85743 301.46484,193.64648 L 299.36719,201.13477 C 299.38281,201.13477 299.40624,201.13867 299.4375,201.14648 C 299.67187,201.16992 299.85156,201.18164 299.97656,201.18164 C 300.66406,201.18164 301.19921,200.99024 301.58203,200.60742 C 301.97265,200.22461 302.23437,199.62305 302.36719,198.80273 L 305.66016,198.80273 C 305.54296,200.41993 304.96874,201.70117 303.9375,202.64648 C 302.91405,203.5918 301.59374,204.06445 299.97656,204.06445 C 299.76562,204.06445 299.55077,204.05664 299.33203,204.04102 C 299.11328,204.02539 298.88671,204.00195 298.65234,203.9707 L 297.96094,206.49023 L 296.68359,206.49023 M 304.19531,223.0957 L 301.99219,223.0957 C 301.92968,222.54884 301.72264,222.12696 301.37109,221.83008 C 301.01952,221.5254 300.55468,221.37306 299.97656,221.37305 C 299.26562,221.37306 298.70702,221.69337 298.30078,222.33398 C 297.89452,222.96681 297.6914,223.85353 297.69141,224.99414 C 297.6914,226.14259 297.89452,227.01758 298.30078,227.61914 C 298.70702,228.22071 299.29687,228.52149 300.07031,228.52148 C 300.64061,228.52149 301.09765,228.35743 301.44141,228.0293 C 301.78514,227.70118 301.99218,227.23633 302.0625,226.63477 L 304.32422,226.62305 C 304.2617,227.70899 303.83592,228.58008 303.04688,229.23633 C 302.2578,229.89258 301.24218,230.22071 300,230.2207 C 298.54687,230.22071 297.39843,229.75977 296.55469,228.83789 C 295.71874,227.91602 295.30078,226.65821 295.30078,225.06445 C 295.30078,223.45509 295.72656,222.17384 296.57813,221.2207 C 297.43749,220.25978 298.58593,219.77931 300.02344,219.7793 C 301.21093,219.77931 302.18749,220.084 302.95313,220.69336 C 303.72655,221.30275 304.14061,222.10353 304.19531,223.0957 M 300,217.7168 C 298.99999,217.71681 298.06249,217.8965 297.1875,218.25586 C 296.32031,218.61525 295.54687,219.13869 294.86719,219.82617 C 294.17187,220.52931 293.64062,221.32618 293.27344,222.2168 C 292.90625,223.09962 292.72265,224.0254 292.72266,224.99414 C 292.72265,225.97071 292.90625,226.89649 293.27344,227.77148 C 293.64062,228.64649 294.17187,229.43164 294.86719,230.12695 C 295.55468,230.81446 296.33984,231.3418 297.22266,231.70898 C 298.10546,232.07617 299.03124,232.25977 300,232.25977 C 300.96874,232.25977 301.89452,232.07617 302.77734,231.70898 C 303.66796,231.3418 304.46874,230.80664 305.17969,230.10352 C 305.86717,229.43164 306.3867,228.66211 306.73828,227.79492 C 307.09764,226.92774 307.27733,225.99415 307.27734,224.99414 C 307.27733,224.00978 307.09373,223.08009 306.72656,222.20508 C 306.36717,221.32228 305.84373,220.53712 305.15625,219.84961 C 304.46092,219.15431 303.67577,218.62697 302.80078,218.26758 C 301.92577,217.90041 300.99218,217.71681 300,217.7168 M 299.97656,216.27539 C 301.16405,216.27541 302.28514,216.49416 303.33984,216.93164 C 304.40233,217.36916 305.35155,218.00587 306.1875,218.8418 C 307.0078,219.66212 307.63279,220.60353 308.0625,221.66602 C 308.49217,222.72071 308.70701,223.8379 308.70703,225.01758 C 308.70701,226.20509 308.49217,227.31446 308.0625,228.3457 C 307.64061,229.37696 307.01561,230.29883 306.1875,231.11133 C 305.3203,231.95508 304.35155,232.60352 303.28125,233.05664 C 302.21093,233.50195 301.10936,233.72461 299.97656,233.72461 C 298.82812,233.72461 297.73046,233.50586 296.68359,233.06836 C 295.64453,232.62305 294.70312,231.97852 293.85938,231.13477 C 293.02343,230.30664 292.38672,229.36914 291.94922,228.32227 C 291.51172,227.26758 291.29297,226.16602 291.29297,225.01758 C 291.29297,223.85353 291.51172,222.74415 291.94922,221.68945 C 292.38672,220.62697 293.02343,219.66994 293.85938,218.81836 C 294.67968,217.99025 295.60937,217.36134 296.64844,216.93164 C 297.68749,216.49416 298.79687,216.27541 299.97656,216.27539"
+       id="text6109" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 472.88672,203.63086 L 472.88672,186.36914 L 476.60156,186.36914 L 483.60938,198.22852 L 483.60938,186.36914 L 487.11328,186.36914 L 487.11328,203.63086 L 483.44531,203.63086 L 476.39063,191.77148 L 476.39063,203.63086 L 472.88672,203.63086 M 483.82031,181.0957 C 483.61717,182.07229 483.31639,182.79494 482.91797,183.26367 C 482.51952,183.72463 482.0078,183.9551 481.38281,183.95508 C 481.21874,183.9551 481.0664,183.94729 480.92578,183.93164 C 480.78515,183.90822 480.64452,183.87307 480.50391,183.82617 L 479.48438,183.52148 C 479.33593,183.48244 479.19921,183.4551 479.07422,183.43945 C 478.94921,183.41604 478.82812,183.40432 478.71094,183.4043 C 478.44531,183.40432 478.23046,183.47463 478.06641,183.61523 C 477.90234,183.75588 477.77343,183.98635 477.67969,184.30664 L 476.39063,184.30664 C 476.57812,183.36135 476.86718,182.66604 477.25781,182.2207 C 477.64843,181.77541 478.15624,181.55276 478.78125,181.55273 C 478.9453,181.55276 479.10937,181.56838 479.27344,181.59961 C 479.43749,181.62307 479.60937,181.66213 479.78906,181.7168 L 480.87891,182.00977 C 480.97265,182.04104 481.0703,182.06447 481.17188,182.08008 C 481.28124,182.09572 481.39843,182.10354 481.52344,182.10352 C 481.77343,182.10354 481.98046,182.02151 482.14453,181.85742 C 482.3164,181.68557 482.4453,181.43166 482.53125,181.0957 L 483.82031,181.0957"
+       id="text6113" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 535.83398,220.83432 L 539.2207,220.83432 L 538.33008,225.93198 C 538.21289,226.55698 538.12304,227.15073 538.06055,227.71323 C 537.99804,228.26792 537.96679,228.72104 537.9668,229.0726 C 537.96679,229.79917 538.13085,230.34214 538.45898,230.70151 C 538.7871,231.05307 539.2871,231.22885 539.95898,231.22885 C 540.74023,231.22885 541.3457,230.90854 541.77539,230.26791 C 542.21288,229.62729 542.57616,228.49058 542.86523,226.85776 L 543.91992,220.83432 L 547.30664,220.83432 L 545.04492,233.6312 L 541.9043,233.6312 L 542.11523,232.2601 C 541.7871,232.86948 541.41991,233.31479 541.01367,233.59604 C 540.61523,233.87729 540.14257,234.01791 539.5957,234.01791 C 539.07226,234.01791 538.60742,233.90073 538.20117,233.66635 C 537.79492,233.43979 537.42773,233.08432 537.09961,232.59995 L 536.04492,238.76401 L 532.69336,238.76401 L 535.83398,220.83432"
+       id="text6117" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 607.875,197.70117 C 607.74217,199.66211 606.98436,201.22071 605.60156,202.37695 C 604.22655,203.5332 602.42968,204.11133 600.21094,204.11133 C 597.65624,204.11133 595.66796,203.31445 594.24609,201.7207 C 592.83203,200.12696 592.125,197.89258 592.125,195.01758 C 592.125,192.08009 592.84765,189.83009 594.29297,188.26758 C 595.73828,186.7051 597.8164,185.92385 600.52734,185.92383 C 602.73046,185.92385 604.46874,186.46291 605.74219,187.54102 C 607.02342,188.61134 607.72655,190.12697 607.85156,192.08789 L 604.34766,192.08789 C 604.19921,191.11134 603.80077,190.36915 603.15234,189.86133 C 602.50389,189.34572 601.6289,189.08791 600.52734,189.08789 C 598.96484,189.08791 597.77734,189.59181 596.96484,190.59961 C 596.15234,191.60743 595.74609,193.08009 595.74609,195.01758 C 595.74609,196.89258 596.14843,198.3418 596.95313,199.36523 C 597.76562,200.38868 598.91796,200.90039 600.41016,200.90039 C 601.48827,200.90039 602.37108,200.62696 603.05859,200.08008 C 603.74608,199.52539 604.19139,198.73243 604.39453,197.70117 L 607.875,197.70117 M 597.62109,208.76367 L 597.62109,207.25195 C 598.24609,207.41601 598.81249,207.54101 599.32031,207.62695 C 599.82812,207.71289 600.26171,207.75586 600.62109,207.75586 C 601.02733,207.75586 601.32421,207.68554 601.51172,207.54492 C 601.69921,207.41211 601.79296,207.19726 601.79297,206.90039 C 601.79296,206.60351 601.68358,206.39258 601.46484,206.26758 C 601.24608,206.14258 600.8828,206.08008 600.375,206.08008 C 600.1953,206.08008 600.05858,206.08008 599.96484,206.08008 C 599.87108,206.08789 599.78515,206.0957 599.70703,206.10352 L 599.70703,203.63086 L 600.90234,203.63086 L 600.90234,204.68555 L 601.07813,204.68555 C 601.99218,204.68555 602.67968,204.87305 603.14063,205.24805 C 603.60155,205.62304 603.83202,206.18164 603.83203,206.92383 C 603.83202,207.70507 603.57421,208.29101 603.05859,208.68164 C 602.54296,209.07226 601.76952,209.26757 600.73828,209.26758 C 600.33983,209.26757 599.87108,209.2246 599.33203,209.13867 C 598.80077,209.05273 598.23046,208.92773 597.62109,208.76367"
+       id="text6121" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 721.7168,216.36914 L 721.7168,219.82617 L 718.23633,219.82617 L 718.23633,216.36914 L 721.7168,216.36914 M 721.55273,221.39648 C 721.55273,221.47462 721.55663,221.5879 721.56445,221.73633 C 721.57226,221.88478 721.57616,221.99415 721.57617,222.06445 C 721.57616,222.74415 721.50194,223.31446 721.35352,223.77539 C 721.20507,224.23634 720.96679,224.66602 720.63867,225.06445 C 720.38085,225.36134 720.00195,225.70118 719.50195,226.08398 C 719.00976,226.4668 718.69335,226.74415 718.55273,226.91602 C 718.24804,227.25977 718.0332,227.57618 717.9082,227.86523 C 717.79101,228.1543 717.73242,228.4668 717.73242,228.80273 C 717.73242,229.55274 717.93554,230.13477 718.3418,230.54883 C 718.74804,230.95508 719.32226,231.15821 720.06445,231.1582 C 720.79882,231.15821 721.38085,230.91211 721.81055,230.41992 C 722.24023,229.91993 722.4746,229.22071 722.51367,228.32227 L 725.8418,228.32227 L 725.8418,228.68555 C 725.84178,230.3418 725.31835,231.66211 724.27148,232.64648 C 723.23241,233.62305 721.83007,234.11133 720.06445,234.11133 C 718.25976,234.11133 716.82226,233.64648 715.75195,232.7168 C 714.68945,231.7793 714.1582,230.53321 714.1582,228.97852 C 714.1582,228.40821 714.2168,227.90821 714.33398,227.47852 C 714.45117,227.04883 714.63086,226.65821 714.87305,226.30664 C 715.18554,225.86915 715.67773,225.39259 716.34961,224.87695 C 717.02148,224.36134 717.43554,224.03321 717.5918,223.89258 C 717.88867,223.60353 718.0996,223.29884 718.22461,222.97852 C 718.35742,222.6504 718.42382,222.25587 718.42383,221.79492 C 718.42382,221.75587 718.41992,221.69337 718.41211,221.60742 C 718.40429,221.51368 718.40039,221.44337 718.40039,221.39648 L 721.55273,221.39648"
+       id="text6131" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Matrix Unicode"
+       d=""
+       id="text6955" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="137.05411"
+       y="23.149496"
+       id="text4346"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348"
+         x="137.05411"
+         y="23.149496"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">		˝ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="186.05411"
+       y="27.3995"
+       id="text4346-3"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-1"
+         x="186.05411"
+         y="27.3995"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			¯ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="482.80411"
+       y="24.6495"
+       id="text4346-1"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-7"
+         x="482.80411"
+         y="24.6495"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			˛ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="558.30408"
+       y="24.399498"
+       id="text4346-6"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-0"
+         x="558.30408"
+         y="24.399498"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">		˘ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="626.55408"
+       y="11.1495"
+       id="text4346-0"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-09"
+         x="626.55408"
+         y="11.1495"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1"><tspan
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:12.5px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start"
+           id="tspan4483"> 		o</tspan></tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="667.80408"
+       y="28.899498"
+       id="text4346-31"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-15"
+         x="667.80408"
+         y="28.899498"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			. </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="619.55408"
+       y="203.14951"
+       id="text4346-38"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-8"
+         x="619.55408"
+         y="203.14951"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			ˇ </tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="620.30408"
+       y="232.14951"
+       id="text4346-9"
+       sodipodi:linespacing="125%"><tspan
+         sodipodi:role="line"
+         id="tspan4348-6"
+         x="620.30408"
+         y="232.14951"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:23.75px;line-height:125%;font-family:'Arial Nova';-inkscape-font-specification:'Arial Nova, Bold';text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#ff0000;fill-opacity:1">			˙ </tspan></text>
+    <path
+       inkscape:connector-curvature="0"
+       style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:24px;line-height:125%;font-family:'Swis721 BT';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="m 402.88672,6.52148 2.95312,0 5.63672,6.574219 -2.7539,0 -4.34766,-4.3476565 -4.37109,4.3476565 -2.75391,0 5.63672,-6.574219"
+       id="text6091-3" />
+  </g>
+</svg>
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.png b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.png
new file mode 100644
index 0000000000..875eb3652f
Binary files /dev/null and b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.png differ
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.svg b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.svg
new file mode 100644
index 0000000000..1ca6a9c872
--- /dev/null
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/docs/KB_US-International.svg
@@ -0,0 +1,935 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://web.resource.org/cc/"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="900"
+   height="300"
+   id="svg2"
+   sodipodi:version="0.32"
+   inkscape:version="0.45.1"
+   version="1.0"
+   sodipodi:docbase="C:\Documents and Settings\David Nelson\Archives\Svg"
+   sodipodi:docname="KB_US-International.svg"
+   inkscape:output_extension="org.inkscape.output.svg.inkscape">
+  <defs
+     id="defs4">
+    <marker
+       inkscape:stockid="Arrow1Lend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Lend"
+       style="overflow:visible;">
+      <path
+         id="path5387"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.8) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Lstart"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Lstart"
+       style="overflow:visible">
+      <path
+         id="path5390"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none"
+         transform="scale(0.8)" />
+    </marker>
+    <marker
+       inkscape:stockid="Tail"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Tail"
+       style="overflow:visible">
+      <g
+         id="g5342"
+         transform="scale(-1.2)">
+        <path
+           id="path5344"
+           d="M -3.8048674,-3.9585227 L 0.54352094,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5346"
+           d="M -1.2866832,-3.9585227 L 3.0617053,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5348"
+           d="M 1.3053582,-3.9585227 L 5.6537466,-0.00068114835"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5350"
+           d="M -3.8048674,4.1775838 L 0.54352094,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5352"
+           d="M -1.2866832,4.1775838 L 3.0617053,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+        <path
+           id="path5354"
+           d="M 1.3053582,4.1775838 L 5.6537466,0.21974226"
+           style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.8;marker-start:none;marker-end:none;stroke-linecap:round" />
+      </g>
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Mend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Mend"
+       style="overflow:visible;">
+      <path
+         id="path5363"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(0.6) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Lend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Lend"
+       style="overflow:visible;">
+      <path
+         id="path5369"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(1.1) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Send"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Send"
+       style="overflow:visible;">
+      <path
+         id="path5375"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.2) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Send"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Send"
+       style="overflow:visible;">
+      <path
+         id="path5357"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(0.3) rotate(180) translate(-5,0)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow1Mend"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Mend"
+       style="overflow:visible;">
+      <path
+         id="path5381"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none;"
+         transform="scale(0.4) rotate(180)" />
+    </marker>
+    <marker
+       inkscape:stockid="Arrow2Lstart"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow2Lstart"
+       style="overflow:visible">
+      <path
+         id="path5372"
+         style="font-size:12.0;fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round"
+         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
+         transform="scale(1.1) translate(-5,0)" />
+    </marker>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="0.74472808"
+     inkscape:cx="450"
+     inkscape:cy="150"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     inkscape:grid-points="true"
+     showgrid="true"
+     gridtolerance="15px"
+     gridcolor="#0000ff"
+     gridopacity="0.12156863"
+     gridempcolor="#0000ff"
+     gridempopacity="0.25098039"
+     gridspacingx="7.5px"
+     gridspacingy="7.5px"
+     gridempspacing="4"
+     showborder="false"
+     inkscape:window-width="756"
+     inkscape:window-height="569"
+     inkscape:window-x="28"
+     inkscape:window-y="218"
+     showguides="true"
+     inkscape:guide-bbox="true"
+     inkscape:grid-bbox="true" />
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1">
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,0 L 60,0 L 60,60 L 0,60 L 0,0 z "
+       id="rect2186" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 60,0 L 120,0 L 120,60 L 60,60 L 60,0 z "
+       id="rect2218" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 120,0 L 180,0 L 180,60 L 120,60 L 120,0 z "
+       id="rect2222" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 180,0 L 240,0 L 240,60 L 180,60 L 180,0 z "
+       id="rect2228" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 240,0 L 300,0 L 300,60 L 240,60 L 240,0 z "
+       id="rect2230" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 300,0 L 360,0 L 360,60 L 300,60 L 300,0 z "
+       id="rect2232" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 360,0 L 420,0 L 420,60 L 360,60 L 360,0 z "
+       id="rect2234" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 420,0 L 480,0 L 480,60 L 420,60 L 420,0 z "
+       id="rect2236" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 480,0 L 540,0 L 540,60 L 480,60 L 480,0 z "
+       id="rect2238" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 540,0 L 600,0 L 600,60 L 540,60 L 540,0 z "
+       id="rect2240" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 600,0 L 660,0 L 660,60 L 600,60 L 600,0 z "
+       id="rect2242" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 660,0 L 720,0 L 720,60 L 660,60 L 660,0 z "
+       id="rect2244" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 720,0 L 780,0 L 780,60 L 720,60 L 720,0 z "
+       id="rect2246" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 780,0 L 900,0 L 900,60 L 780,60 L 780,0 z "
+       id="rect2248" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,60 L 90,60 L 90,120 L 0,120 L 0,60 z "
+       id="rect2250" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 90,60 L 150,60 L 150,120 L 90,120 L 90,60 z "
+       id="rect2252" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 150,60 L 210,60 L 210,120 L 150,120 L 150,60 z "
+       id="rect2254" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 210,60 L 270,60 L 270,120 L 210,120 L 210,60 z "
+       id="rect2256" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 270,60 L 330,60 L 330,120 L 270,120 L 270,60 z "
+       id="rect2258" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 330,60 L 390,60 L 390,120 L 330,120 L 330,60 z "
+       id="rect2262" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 390,60 L 450,60 L 450,120 L 390,120 L 390,60 z "
+       id="rect2264" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 450,60 L 510,60 L 510,120 L 450,120 L 450,60 z "
+       id="rect2266" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 510,60 L 570,60 L 570,120 L 510,120 L 510,60 z "
+       id="rect2270" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 570,60 L 630,60 L 630,120 L 570,120 L 570,60 z "
+       id="rect2272" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 630,60 L 690,60 L 690,120 L 630,120 L 630,60 z "
+       id="rect2274" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 690,60 L 750,60 L 750,120 L 690,120 L 690,60 z "
+       id="rect2278" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 750,60 L 810,60 L 810,120 L 750,120 L 750,60 z "
+       id="rect2280" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 810,60 L 900,60 L 900,120 L 810,120 L 810,60 z "
+       id="rect2284" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,120 L 105,120 L 105,180 L 0,180 L 0,120 z "
+       id="rect2286" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 105,120 L 165,120 L 165,180 L 105,180 L 105,120 z "
+       id="rect2292" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 165,120 L 225,120 L 225,180 L 165,180 L 165,120 z "
+       id="rect2296" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 225,120 L 285,120 L 285,180 L 225,180 L 225,120 z "
+       id="rect2298" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 285,120 L 345,120 L 345,180 L 285,180 L 285,120 z "
+       id="rect2300" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 345,120 L 405,120 L 405,180 L 345,180 L 345,120 z "
+       id="rect2302" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 405,120 L 465,120 L 465,180 L 405,180 L 405,120 z "
+       id="rect2306" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 465,120 L 525,120 L 525,180 L 465,180 L 465,120 z "
+       id="rect2308" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 525,120 L 585,120 L 585,180 L 525,180 L 525,120 z "
+       id="rect2312" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 585,120 L 645,120 L 645,180 L 585,180 L 585,120 z "
+       id="rect2314" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 645,120 L 705,120 L 705,180 L 645,180 L 645,120 z "
+       id="rect2316" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 705,120 L 765,120 L 765,180 L 705,180 L 705,120 z "
+       id="rect2318" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 765,120 L 900,120 L 900,180 L 765,180 L 765,120 z "
+       id="rect2320" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,180 L 135,180 L 135,240 L 0,240 L 0,180 z "
+       id="rect2322" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 135,180 L 195,180 L 195,240 L 135,240 L 135,180 z "
+       id="rect2324" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 195,180 L 255,180 L 255,240 L 195,240 L 195,180 z "
+       id="rect2326" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 255,180 L 315,180 L 315,240 L 255,240 L 255,180 z "
+       id="rect2330" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 315,180 L 375,180 L 375,240 L 315,240 L 315,180 z "
+       id="rect2334" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 375,180 L 435,180 L 435,240 L 375,240 L 375,180 z "
+       id="rect2336" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 435,180 L 495,180 L 495,240 L 435,240 L 435,180 z "
+       id="rect2338" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 495,180 L 555,180 L 555,240 L 495,240 L 495,180 z "
+       id="rect2340" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 555,180 L 615,180 L 615,240 L 555,240 L 555,180 z "
+       id="rect2342" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 615,180 L 675,180 L 675,240 L 615,240 L 615,180 z "
+       id="rect2344" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 675,180 L 735,180 L 735,240 L 675,240 L 675,180 z "
+       id="rect2346" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 735,180 L 900,180 L 900,240 L 735,240 L 735,180 z "
+       id="rect2348" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 0,240 L 90,240 L 90,300 L 0,300 L 0,240 z "
+       id="rect2350" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 810,240 L 900,240 L 900,300 L 810,300 L 810,240 z "
+       id="rect2352" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 150,240 L 240,240 L 240,300 L 150,300 L 150,240 z "
+       id="rect2354" />
+    <path
+       style="fill:#dfdfdf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 600,240 L 690,240 L 690,300 L 600,300 L 600,240 z "
+       id="rect2360" />
+    <path
+       style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 240,240 L 600,240 L 600,300 L 240,300 L 240,240 z "
+       id="rect2362" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 90,240 L 150,240 L 150,300 L 90,300 L 90,240 z "
+       id="rect2364" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 690,240 L 750,240 L 750,300 L 690,300 L 690,240 z "
+       id="rect2366" />
+    <path
+       style="fill:#efefef;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1"
+       d="M 750,240 L 810,240 L 810,300 L 750,300 L 750,240 z "
+       id="rect2368" />
+    <path
+       style=""
+       d=""
+       id="flowRoot4146" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 75.351563,18.826172 L 74.4375,11.056641 L 74.4375,6.3691406 L 78.046875,6.3691406 L 78.046875,11.056641 L 77.132813,18.826172 L 75.351563,18.826172 M 74.484375,23.630859 L 74.484375,20.173828 L 77.964844,20.173828 L 77.964844,23.630859 L 74.484375,23.630859 M 75.351563,53.630859 L 75.351563,42.158203 L 71.34375,42.158203 L 71.34375,39.802734 L 71.601563,39.802734 C 73.062496,39.802748 74.124995,39.576186 74.789063,39.123047 C 75.460931,38.669937 75.855462,37.912125 75.972656,36.849609 L 78.65625,36.849609 L 78.65625,53.630859 L 75.351563,53.630859"
+       id="text5091" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 23.34375,14.220703 L 23.34375,16.810547 C 22.531233,17.365241 21.761702,17.775396 21.035156,18.041016 C 20.316391,18.298833 19.605455,18.42774 18.902344,18.427734 C 18.542956,18.42774 18.183581,18.39649 17.824219,18.333984 C 17.464832,18.27149 17.105457,18.181646 16.746094,18.064453 C 16.558583,18.001959 16.281239,17.904303 15.914063,17.771484 C 14.203116,17.185553 12.902336,16.892585 12.011719,16.892578 C 11.34765,16.892585 10.652339,17.041022 9.9257813,17.337891 C 9.2070275,17.626959 8.3984345,18.091802 7.5,18.732422 L 7.5,16.142578 C 8.3359346,15.580086 9.1328088,15.162118 9.890625,14.888672 C 10.648432,14.607431 11.363275,14.466806 12.035156,14.466797 C 12.949211,14.466806 14.085929,14.693368 15.445313,15.146484 C 15.46874,15.154305 15.484365,15.158212 15.492188,15.158203 C 15.632802,15.205087 15.847646,15.279305 16.136719,15.380859 C 17.347644,15.810555 18.285143,16.025398 18.949219,16.025391 C 19.613267,16.025398 20.29686,15.880867 21,15.591797 C 21.703109,15.302743 22.484358,14.845712 23.34375,14.220703 M 11.988281,35.033203 L 15.011719,35.033203 L 17.320313,39.369141 L 15.65625,39.369141 L 11.988281,35.033203"
+       id="text5103" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 136.47578,20.443359 C 136.04608,21.099612 135.54999,21.583986 134.9875,21.896484 C 134.42499,22.201173 133.76093,22.353517 132.99532,22.353516 C 131.76093,22.353517 130.81953,22.01758 130.1711,21.345703 C 129.53047,20.673831 129.21015,19.681645 129.21016,18.369141 C 129.21015,16.50196 129.75312,14.935556 130.83907,13.669922 C 131.93281,12.404308 133.27656,11.771496 134.87032,11.771484 C 135.4953,11.771496 136.03827,11.900402 136.49922,12.158203 C 136.96015,12.416027 137.33905,12.798839 137.63594,13.306641 L 138.25703,12.158203 L 140.34297,12.158203 L 138.62032,19.166016 C 138.59686,19.251958 138.57733,19.341801 138.56172,19.435547 C 138.54608,19.521488 138.53827,19.591801 138.53828,19.646484 C 138.53827,19.919926 138.63202,20.126957 138.81953,20.267578 C 139.00702,20.400394 139.28436,20.4668 139.65157,20.466797 C 139.95624,20.4668 140.27264,20.388675 140.60078,20.232422 C 140.9367,20.076175 141.2492,19.857426 141.53828,19.576172 C 142.21014,18.951177 142.71795,18.220709 143.06172,17.384766 C 143.41326,16.548835 143.58904,15.630867 143.58907,14.630859 C 143.58904,12.75587 142.86248,11.216809 141.40938,10.013672 C 139.96405,8.8027492 138.09686,8.1972811 135.80782,8.1972656 C 134.70624,8.1972811 133.6789,8.3300934 132.72578,8.5957031 C 131.78046,8.8613429 130.92109,9.2558737 130.14766,9.7792969 C 128.81953,10.669935 127.79609,11.783215 127.07735,13.119141 C 126.36641,14.455087 126.01094,15.91993 126.01094,17.513672 C 126.01094,19.912113 126.81953,21.83008 128.43672,23.267578 C 130.0539,24.697265 132.21406,25.412108 134.91719,25.412109 C 136.1828,25.412108 137.41718,25.220702 138.62032,24.837891 C 139.83124,24.455077 140.95623,23.90039 141.99532,23.173828 L 142.95625,24.544922 C 141.76092,25.443358 140.49139,26.119138 139.14766,26.572266 C 137.81171,27.025387 136.41718,27.25195 134.96407,27.251953 C 133.46405,27.25195 132.08515,27.060543 130.82735,26.677734 C 129.56953,26.302732 128.45234,25.744139 127.47578,25.001953 C 126.26484,24.05664 125.35859,22.966798 124.75703,21.732422 C 124.15547,20.49805 123.85469,19.099614 123.85469,17.537109 C 123.85469,16.232429 124.05781,14.990243 124.46407,13.810547 C 124.87813,12.623058 125.48359,11.544934 126.28047,10.576172 C 127.43672,9.1621238 128.82734,8.0918124 130.45235,7.3652344 C 132.07734,6.6386889 133.88593,6.275408 135.87813,6.2753906 C 137.19843,6.275408 138.43671,6.4550953 139.59297,6.8144531 C 140.75702,7.1660321 141.76873,7.6660316 142.62813,8.3144531 C 143.68279,9.1347801 144.46795,10.072279 144.9836,11.126953 C 145.50701,12.17384 145.76873,13.357432 145.76875,14.677734 C 145.76873,15.966805 145.51092,17.15821 144.99532,18.251953 C 144.48748,19.337895 143.75311,20.267581 142.79219,21.041016 C 142.2453,21.478518 141.64764,21.814455 140.99922,22.048828 C 140.35858,22.275392 139.69061,22.388673 138.99532,22.388672 C 138.16718,22.388673 137.54218,22.224611 137.12032,21.896484 C 136.70624,21.568361 136.4914,21.083987 136.47578,20.443359 M 137.06172,15.427734 C 136.96015,14.794931 136.73358,14.314462 136.38203,13.986328 C 136.03827,13.650401 135.58124,13.482432 135.01094,13.482422 C 134.1203,13.482432 133.34687,13.966807 132.69063,14.935547 C 132.03437,15.904305 131.70624,17.068366 131.70625,18.427734 C 131.70624,19.146489 131.86249,19.693363 132.175,20.068359 C 132.49531,20.443363 132.95624,20.630862 133.55782,20.630859 C 134.20624,20.630862 134.79608,20.384769 135.32735,19.892578 C 135.8664,19.400395 136.23358,18.75977 136.42891,17.970703 L 137.06172,15.427734 M 128.56563,53.630859 C 128.58125,52.130861 128.90156,50.861331 129.52657,49.822266 C 130.15156,48.775395 131.26094,47.716803 132.85469,46.646484 C 133.09687,46.482429 133.44844,46.255867 133.90938,45.966797 C 136.01875,44.615243 137.07343,43.314463 137.07344,42.064453 C 137.07343,41.322278 136.85078,40.736341 136.40547,40.306641 C 135.96015,39.876967 135.35078,39.662123 134.57735,39.662109 C 133.73359,39.662123 133.08125,39.927748 132.62032,40.458984 C 132.16719,40.982435 131.94062,41.732434 131.94063,42.708984 L 131.94063,42.849609 L 128.84688,42.849609 C 128.84688,40.927747 129.3625,39.44728 130.39375,38.408203 C 131.425,37.369157 132.89375,36.849626 134.8,36.849609 C 136.52656,36.849626 137.90546,37.322282 138.93672,38.267578 C 139.96796,39.205093 140.48358,40.455091 140.4836,42.017578 C 140.48358,43.134776 140.21405,44.103525 139.675,44.923828 C 139.13593,45.744149 138.09296,46.677741 136.5461,47.724609 C 136.21796,47.951178 135.76484,48.248052 135.18672,48.615234 C 133.71797,49.560551 132.88984,50.2793 132.70235,50.771484 L 140.31953,50.771484 L 140.31953,53.630859 L 128.56563,53.630859"
+       id="text5127" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 195.28125,13.693359 L 194.25,16.552734 L 197.19141,16.552734 L 198.19922,13.693359 L 195.28125,13.693359 M 195.28125,6.4746094 L 197.87109,6.4746094 L 196.16016,11.337891 L 198.99609,11.337891 L 200.73047,6.4746094 L 203.32031,6.4746094 L 201.58594,11.337891 L 204.90234,11.337891 L 204.03516,13.693359 L 200.75391,13.693359 L 199.76953,16.529297 L 203.16797,16.529297 L 202.33594,18.873047 L 198.92578,18.873047 L 197.19141,23.748047 L 194.60156,23.748047 L 196.33594,18.873047 L 193.47656,18.873047 L 191.73047,23.748047 L 189.15234,23.748047 L 190.86328,18.873047 L 187.5,18.873047 L 188.39063,16.529297 L 191.69531,16.529297 L 192.70313,13.693359 L 189.19922,13.693359 L 190.06641,11.337891 L 193.54688,11.337891 L 195.28125,6.4746094 M 190.07813,48.521484 L 193.30078,48.521484 C 193.30859,49.458989 193.53515,50.166019 193.98047,50.642578 C 194.42578,51.111331 195.08593,51.345705 195.96094,51.345703 C 196.80468,51.345705 197.45312,51.126956 197.90625,50.689453 C 198.36718,50.244144 198.59765,49.607426 198.59766,48.779297 C 198.59765,47.951178 198.32812,47.326178 197.78906,46.904297 C 197.2578,46.474617 196.46484,46.259773 195.41016,46.259766 C 195.35546,46.259773 195.26953,46.263679 195.15234,46.271484 C 195.04296,46.279304 194.96093,46.28321 194.90625,46.283203 L 194.90625,43.962891 L 195.26953,43.962891 C 196.23827,43.9629 196.95312,43.7754 197.41406,43.400391 C 197.8828,43.017589 198.11718,42.435558 198.11719,41.654297 C 198.11718,41.005872 197.91796,40.494154 197.51953,40.119141 C 197.1289,39.736342 196.59374,39.544936 195.91406,39.544922 C 195.17187,39.544936 194.59765,39.763686 194.19141,40.201172 C 193.78515,40.638685 193.58203,41.259778 193.58203,42.064453 L 193.58203,42.205078 L 190.41797,42.205078 C 190.45703,40.486341 190.96094,39.169936 191.92969,38.255859 C 192.90625,37.334001 194.28125,36.873064 196.05469,36.873047 C 197.73437,36.873064 199.0664,37.283219 200.05078,38.103516 C 201.03514,38.923843 201.52733,40.02931 201.52734,41.419922 C 201.52733,42.154308 201.35936,42.798839 201.02344,43.353516 C 200.68749,43.908213 200.18358,44.365244 199.51172,44.724609 C 200.37108,45.099618 201.01952,45.619149 201.45703,46.283203 C 201.90233,46.93946 202.12499,47.724615 202.125,48.638672 C 202.12499,50.318363 201.57421,51.650393 200.47266,52.634766 C 199.37108,53.619141 197.86718,54.111328 195.96094,54.111328 C 194.07812,54.111328 192.625,53.634766 191.60156,52.681641 C 190.58594,51.720705 190.07812,50.357425 190.07813,48.591797 L 190.07813,48.521484"
+       id="text5139" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 254.46094,21.451172 C 255.10155,21.365237 255.58984,21.134768 255.92578,20.759766 C 256.26171,20.384769 256.42968,19.884769 256.42969,19.259766 C 256.42968,18.705083 256.26952,18.248052 255.94922,17.888672 C 255.63671,17.52149 255.14062,17.236335 254.46094,17.033203 L 254.46094,21.451172 M 253.06641,13.435547 L 253.06641,9.4511719 C 252.45703,9.529311 251.99218,9.7402483 251.67188,10.083984 C 251.35156,10.419935 251.1914,10.87306 251.19141,11.443359 C 251.1914,11.919934 251.33984,12.318371 251.63672,12.638672 C 251.9414,12.958995 252.41796,13.22462 253.06641,13.435547 M 253.06641,26.267578 L 253.06641,24.017578 C 251.30078,23.908203 249.98047,23.396485 249.10547,22.482422 C 248.23047,21.568361 247.79297,20.24805 247.79297,18.521484 L 250.93359,18.521484 C 250.97265,19.365239 251.16796,20.033207 251.51953,20.525391 C 251.8789,21.009768 252.39453,21.318362 253.06641,21.451172 L 253.06641,16.599609 C 251.2539,16.138679 249.96484,15.537117 249.19922,14.794922 C 248.43359,14.052744 248.05078,13.03712 248.05078,11.748047 C 248.05078,10.318373 248.5039,9.1660301 249.41016,8.2910156 C 250.32422,7.4160318 251.54296,6.959001 253.06641,6.9199219 L 253.06641,5.4199219 L 254.46094,5.4199219 L 254.46094,6.9199219 C 255.98437,6.9980635 257.17186,7.4590005 258.02344,8.3027344 C 258.87499,9.1386864 259.34374,10.318373 259.42969,11.841797 L 256.24219,11.841797 C 256.18749,11.115247 256.01171,10.56056 255.71484,10.177734 C 255.42577,9.7871232 255.0078,9.5683734 254.46094,9.5214844 L 254.46094,13.787109 C 256.39062,14.388681 257.74999,15.07618 258.53906,15.849609 C 259.32811,16.623054 259.72264,17.642584 259.72266,18.908203 C 259.72264,20.400394 259.26171,21.591799 258.33984,22.482422 C 257.42577,23.373047 256.1328,23.892578 254.46094,24.041016 L 254.46094,26.267578 L 253.06641,26.267578 M 254.64844,47.419922 L 254.64844,40.236328 L 250.08984,47.419922 L 254.64844,47.419922 M 254.57813,53.630859 L 254.57813,50.009766 L 247.5,50.009766 L 247.5,47.056641 L 253.6875,37.330078 L 257.84766,37.330078 L 257.84766,47.337891 L 259.79297,47.337891 L 259.79297,50.009766 L 257.84766,50.009766 L 257.84766,53.630859 L 254.57813,53.630859"
+       id="text5145" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 320.42578,19.740234 C 320.42577,20.263675 320.60155,20.705081 320.95313,21.064453 C 321.30467,21.416018 321.73827,21.591799 322.25391,21.591797 C 322.75389,21.591799 323.18358,21.412112 323.54297,21.052734 C 323.90233,20.68555 324.08201,20.24805 324.08203,19.740234 C 324.08201,19.240239 323.90233,18.814458 323.54297,18.462891 C 323.19139,18.103521 322.7617,17.923834 322.25391,17.923828 C 321.73827,17.923834 321.30467,18.099615 320.95313,18.451172 C 320.60155,18.794927 320.42577,19.224614 320.42578,19.740234 M 317.88281,19.740234 C 317.8828,18.521489 318.30468,17.494147 319.14844,16.658203 C 319.99217,15.822273 321.02733,15.404305 322.25391,15.404297 C 323.45701,15.404305 324.48045,15.830086 325.32422,16.681641 C 326.17576,17.525397 326.60154,18.544927 326.60156,19.740234 C 326.60154,20.943362 326.17576,21.974611 325.32422,22.833984 C 324.47264,23.685547 323.4492,24.111328 322.25391,24.111328 C 321.02733,24.111328 319.99217,23.689453 319.14844,22.845703 C 318.30468,22.001955 317.8828,20.9668 317.88281,19.740234 M 311.07422,24.111328 L 321.08203,6.8496094 L 322.96875,6.8496094 L 312.96094,24.111328 L 311.07422,24.111328 M 310.04297,11.220703 C 310.04297,11.73634 310.21484,12.169933 310.55859,12.521484 C 310.91015,12.873058 311.34375,13.048839 311.85938,13.048828 C 312.36718,13.048839 312.79687,12.873058 313.14844,12.521484 C 313.50781,12.162121 313.68749,11.728528 313.6875,11.220703 C 313.68749,10.720716 313.50781,10.294935 313.14844,9.9433594 C 312.79687,9.5839984 312.36718,9.4043111 311.85938,9.4042969 C 311.34375,9.4043111 310.91015,9.5800922 310.55859,9.9316406 C 310.21484,10.275404 310.04297,10.705091 310.04297,11.220703 M 307.5,11.220703 C 307.5,10.001967 307.92187,8.9707178 308.76563,8.1269531 C 309.60937,7.275407 310.64062,6.8496262 311.85938,6.8496094 C 313.06249,6.8496262 314.08593,7.2793132 314.92969,8.1386719 C 315.78124,8.990249 316.20702,10.017592 316.20703,11.220703 C 316.20702,12.423839 315.78124,13.451182 314.92969,14.302734 C 314.08593,15.146493 313.06249,15.568367 311.85938,15.568359 C 310.63281,15.568367 309.59765,15.150399 308.75391,14.314453 C 307.91797,13.478526 307.5,12.447277 307.5,11.220703 M 310.85156,49.119141 L 314.13281,49.119141 C 314.1875,49.853519 314.43359,50.423831 314.87109,50.830078 C 315.30859,51.228518 315.89453,51.427737 316.62891,51.427734 C 317.53515,51.427737 318.22655,51.162112 318.70313,50.630859 C 319.18749,50.099613 319.42968,49.337895 319.42969,48.345703 C 319.42968,47.416022 319.18358,46.685554 318.69141,46.154297 C 318.19921,45.615242 317.51952,45.345711 316.65234,45.345703 C 316.16796,45.345711 315.74218,45.443368 315.375,45.638672 C 315.00781,45.833992 314.69531,46.123054 314.4375,46.505859 L 311.41406,46.330078 L 312.50391,37.330078 L 322.14844,37.330078 L 322.14844,40.166016 L 314.87109,40.166016 L 314.4375,43.529297 C 314.80468,43.240245 315.22656,43.025401 315.70313,42.884766 C 316.17968,42.736339 316.71093,42.66212 317.29688,42.662109 C 318.96874,42.66212 320.3164,43.169932 321.33984,44.185547 C 322.37108,45.20118 322.88671,46.53321 322.88672,48.181641 C 322.88671,49.986332 322.3203,51.427737 321.1875,52.505859 C 320.05468,53.576172 318.53515,54.111328 316.62891,54.111328 C 314.89453,54.111328 313.51172,53.669922 312.48047,52.787109 C 311.45703,51.896486 310.91406,50.673831 310.85156,49.119141"
+       id="text5151" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 372.15234,48.298828 C 372.15234,49.25977 372.39062,50.021488 372.86719,50.583984 C 373.35156,51.146487 374.00781,51.427737 374.83594,51.427734 C 375.60937,51.427737 376.21484,51.154299 376.65234,50.607422 C 377.08983,50.06055 377.30858,49.298832 377.30859,48.322266 C 377.30858,47.423834 377.08202,46.724616 376.62891,46.224609 C 376.17577,45.724617 375.53905,45.474618 374.71875,45.474609 C 373.91406,45.474618 373.28515,45.724617 372.83203,46.224609 C 372.3789,46.724616 372.15234,47.416022 372.15234,48.298828 M 372.10547,43.916016 C 372.48828,43.525401 372.94921,43.232432 373.48828,43.037109 C 374.02734,42.833995 374.6289,42.732433 375.29297,42.732422 C 376.93358,42.732433 378.24608,43.232432 379.23047,44.232422 C 380.22264,45.23243 380.71874,46.56446 380.71875,48.228516 C 380.71874,49.994144 380.17968,51.419924 379.10156,52.505859 C 378.02343,53.591797 376.60155,54.134765 374.83594,54.134766 C 372.79687,54.134765 371.24609,53.431641 370.18359,52.025391 C 369.1289,50.619144 368.60156,48.560552 368.60156,45.849609 C 368.60156,42.935558 369.16797,40.708997 370.30078,39.169922 C 371.43359,37.623063 373.0664,36.849626 375.19922,36.849609 C 376.68358,36.849626 377.8789,37.236345 378.78516,38.009766 C 379.69921,38.783218 380.19921,39.830092 380.28516,41.150391 L 376.88672,41.150391 C 376.80858,40.611341 376.59765,40.205092 376.25391,39.931641 C 375.91015,39.658217 375.42968,39.521498 374.8125,39.521484 C 373.96874,39.521498 373.32031,39.888686 372.86719,40.623047 C 372.41406,41.349622 372.16015,42.447277 372.10547,43.916016"
+       id="text5157" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 432.85547,16.095703 L 431.96484,16.740234 C 431.60546,16.990241 431.33593,17.291022 431.15625,17.642578 C 430.97656,17.994146 430.88671,18.388677 430.88672,18.826172 C 430.88671,19.490239 431.11328,20.048832 431.56641,20.501953 C 432.01953,20.955081 432.58593,21.181643 433.26563,21.181641 C 433.76562,21.181643 434.24218,21.080081 434.69531,20.876953 C 435.15624,20.666019 435.58202,20.361331 435.97266,19.962891 L 432.85547,16.095703 M 433.79297,12.404297 L 434.20313,12.111328 C 434.57812,11.853527 434.85546,11.564465 435.03516,11.244141 C 435.21483,10.923841 435.30468,10.556654 435.30469,10.142578 C 435.30468,9.7441545 435.17968,9.4277486 434.92969,9.1933594 C 434.68749,8.958999 434.35546,8.8418117 433.93359,8.8417969 C 433.5039,8.8418117 433.16406,8.9629053 432.91406,9.2050781 C 432.66406,9.4394673 432.53906,9.7597795 432.53906,10.166016 C 432.53906,10.384779 432.59765,10.62306 432.71484,10.880859 C 432.83984,11.138684 433.01562,11.412122 433.24219,11.701172 L 433.79297,12.404297 M 431.15625,13.962891 L 430.47656,13.072266 C 430.125,12.603527 429.87109,12.166027 429.71484,11.759766 C 429.5664,11.345715 429.49218,10.912122 429.49219,10.458984 C 429.49218,9.2089988 429.89062,8.2168123 430.6875,7.4824219 C 431.49218,6.7402513 432.58203,6.3691579 433.95703,6.3691406 C 435.27733,6.3691579 436.3203,6.7090013 437.08594,7.3886719 C 437.85155,8.0683749 438.23436,8.9863428 438.23438,10.142578 C 438.23436,11.017591 438.0078,11.802746 437.55469,12.498047 C 437.10936,13.185557 436.40624,13.833994 435.44531,14.443359 L 437.91797,17.490234 C 438.15233,17.107428 438.33593,16.677741 438.46875,16.201172 C 438.60936,15.724617 438.70702,15.193368 438.76172,14.607422 L 441.80859,14.607422 C 441.72264,15.623055 441.5117,16.56446 441.17578,17.431641 C 440.83983,18.298833 440.37889,19.091801 439.79297,19.810547 L 442.93359,23.630859 L 438.94922,23.630859 L 437.77734,22.189453 C 437.08983,22.822266 436.33202,23.302735 435.50391,23.630859 C 434.68359,23.951172 433.82421,24.111328 432.92578,24.111328 C 431.33203,24.111328 430.02734,23.638672 429.01172,22.693359 C 428.0039,21.748049 427.5,20.541019 427.5,19.072266 C 427.5,17.978521 427.78125,17.037116 428.34375,16.248047 C 428.90625,15.458993 429.84375,14.697275 431.15625,13.962891 M 434.66016,53.630859 L 431.15625,53.630859 C 431.28125,51.341799 431.83203,49.07227 432.80859,46.822266 C 433.79296,44.572275 435.19531,42.361339 437.01563,40.189453 L 428.76563,40.189453 L 428.76563,37.330078 L 440.66016,37.330078 L 440.66016,39.849609 C 438.8164,41.880871 437.39843,44.029306 436.40625,46.294922 C 435.42187,48.560552 434.83984,51.005862 434.66016,53.630859"
+       id="text5163" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 493.5,13.212891 L 491.4375,16.119141 L 489.44531,14.724609 L 491.69531,11.900391 L 488.41406,10.986328 L 489.17578,8.6074219 L 492.32813,9.7324219 L 492.32813,6.3691406 L 494.64844,6.3691406 L 494.64844,9.7324219 L 497.80078,8.6308594 L 498.58594,11.009766 L 495.30469,11.900391 L 497.53125,14.701172 L 495.49219,16.166016 L 493.5,13.212891 M 490.875,48.755859 C 490.875,49.576176 491.10156,50.208988 491.55469,50.654297 C 492.01562,51.099612 492.67187,51.322268 493.52344,51.322266 C 494.33593,51.322268 494.97265,51.095706 495.43359,50.642578 C 495.90233,50.189457 496.13671,49.560551 496.13672,48.755859 C 496.13671,47.982428 495.89843,47.361334 495.42188,46.892578 C 494.9453,46.423835 494.31249,46.189461 493.52344,46.189453 C 492.73437,46.189461 492.09374,46.427742 491.60156,46.904297 C 491.11718,47.380866 490.875,47.998053 490.875,48.755859 M 491.14453,41.560547 C 491.14453,42.208996 491.34765,42.708995 491.75391,43.060547 C 492.16015,43.404307 492.74218,43.576182 493.5,43.576172 C 494.2578,43.576182 494.83984,43.400401 495.24609,43.048828 C 495.66015,42.697277 495.86718,42.201183 495.86719,41.560547 C 495.86718,40.93556 495.65624,40.443373 495.23438,40.083984 C 494.81249,39.724623 494.23437,39.544936 493.5,39.544922 C 492.78124,39.544936 492.20703,39.72853 491.77734,40.095703 C 491.35546,40.462904 491.14453,40.951185 491.14453,41.560547 M 489.9375,44.818359 C 489.23437,44.427744 488.72656,43.970713 488.41406,43.447266 C 488.10156,42.923839 487.94531,42.255871 487.94531,41.443359 C 487.94531,40.005873 488.4375,38.876968 489.42188,38.056641 C 490.40625,37.236345 491.76562,36.826189 493.5,36.826172 C 495.24999,36.826189 496.61718,37.236345 497.60156,38.056641 C 498.59374,38.869155 499.08983,39.998061 499.08984,41.443359 C 499.08983,42.216808 498.92186,42.888683 498.58594,43.458984 C 498.24999,44.021494 497.74608,44.474619 497.07422,44.818359 C 497.89452,45.20118 498.51171,45.73243 498.92578,46.412109 C 499.33983,47.083991 499.54686,47.904303 499.54688,48.873047 C 499.54686,50.505862 499.0078,51.787111 497.92969,52.716797 C 496.85936,53.646484 495.3828,54.111328 493.5,54.111328 C 491.59375,54.111328 490.11328,53.650391 489.05859,52.728516 C 488.0039,51.806642 487.47656,50.521487 487.47656,48.873047 C 487.47656,47.912115 487.67187,47.107428 488.0625,46.458984 C 488.46094,45.802742 489.08594,45.255868 489.9375,44.818359"
+       id="text5169" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 557.85938,6.3691406 C 556.78124,8.1347811 555.98046,9.9316543 555.45703,11.759766 C 554.93359,13.587901 554.67187,15.505868 554.67188,17.513672 C 554.67187,19.513676 554.93359,21.427737 555.45703,23.255859 C 555.98046,25.083983 556.78124,26.880856 557.85938,28.646484 L 555.38672,28.646484 C 554.01953,26.779294 552.98046,24.904296 552.26953,23.021484 C 551.5664,21.130862 551.21484,19.294926 551.21484,17.513672 C 551.21484,15.73243 551.5664,13.896494 552.26953,12.005859 C 552.98046,10.115248 554.01953,8.2363435 555.38672,6.3691406 L 557.85938,6.3691406 M 556.06641,42.685547 C 556.0664,41.724621 555.82421,40.96681 555.33984,40.412109 C 554.86327,39.849623 554.21093,39.568373 553.38281,39.568359 C 552.60156,39.568373 551.99218,39.837904 551.55469,40.376953 C 551.125,40.916028 550.91015,41.669934 550.91016,42.638672 C 550.91015,43.544932 551.13671,44.251963 551.58984,44.759766 C 552.04296,45.267586 552.67968,45.521492 553.5,45.521484 C 554.30468,45.521492 554.93359,45.271493 555.38672,44.771484 C 555.83983,44.271494 556.0664,43.576182 556.06641,42.685547 M 556.125,47.056641 C 555.73437,47.447272 555.27343,47.74024 554.74219,47.935547 C 554.21093,48.130865 553.61327,48.228521 552.94922,48.228516 C 551.30078,48.228521 549.98047,47.732428 548.98828,46.740234 C 547.99609,45.748055 547.5,44.419931 547.5,42.755859 C 547.5,40.990247 548.03906,39.564467 549.11719,38.478516 C 550.19531,37.392594 551.61718,36.849626 553.38281,36.849609 C 555.42968,36.849626 556.98436,37.556657 558.04688,38.970703 C 559.11718,40.376966 559.65233,42.431652 559.65234,45.134766 C 559.65233,48.041021 559.08202,50.267581 557.94141,51.814453 C 556.80077,53.361328 555.16015,54.134765 553.01953,54.134766 C 551.54296,54.134765 550.35156,53.751953 549.44531,52.986328 C 548.53906,52.212892 548.04297,51.162112 547.95703,49.833984 L 551.34375,49.845703 C 551.42187,50.384769 551.63281,50.787112 551.97656,51.052734 C 552.32031,51.318362 552.80468,51.451174 553.42969,51.451172 C 554.27343,51.451174 554.91796,51.083987 555.36328,50.349609 C 555.80858,49.615238 556.06249,48.517583 556.125,47.056641"
+       id="text5175" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 609.375,6.3691406 L 611.87109,6.3691406 C 613.23046,8.228531 614.26171,10.103529 614.96484,11.994141 C 615.66796,13.876963 616.01952,15.716805 616.01953,17.513672 C 616.01952,19.302739 615.66796,21.142581 614.96484,23.033203 C 614.26171,24.923827 613.23046,26.794919 611.87109,28.646484 L 609.375,28.646484 C 610.46094,26.873044 611.26562,25.072264 611.78906,23.244141 C 612.32031,21.408205 612.58593,19.498051 612.58594,17.513672 C 612.58593,15.521492 612.32031,13.611338 611.78906,11.783203 C 611.26562,9.9550918 610.46094,8.1504061 609.375,6.3691406 M 610.98047,45.474609 C 610.98046,47.513678 611.18359,48.994145 611.58984,49.916016 C 612.0039,50.837893 612.66015,51.29883 613.55859,51.298828 C 614.45702,51.29883 615.11327,50.833987 615.52734,49.904297 C 615.9414,48.974614 616.14843,47.498053 616.14844,45.474609 C 616.14843,43.44337 615.9414,41.966809 615.52734,41.044922 C 615.11327,40.12306 614.45702,39.662123 613.55859,39.662109 C 612.66015,39.662123 612.0039,40.12306 611.58984,41.044922 C 611.18359,41.958996 610.98046,43.435557 610.98047,45.474609 M 607.5,45.474609 C 607.5,42.591808 608,40.43556 609,39.005859 C 610.00781,37.568375 611.52734,36.849626 613.55859,36.849609 C 615.58202,36.849626 617.09765,37.572282 618.10547,39.017578 C 619.12108,40.455091 619.62889,42.615245 619.62891,45.498047 C 619.62889,48.380865 619.12499,50.533206 618.11719,51.955078 C 617.11718,53.376953 615.59765,54.08789 613.55859,54.087891 C 611.52734,54.08789 610.00781,53.373047 609,51.943359 C 608,50.513675 607.5,48.357427 607.5,45.474609"
+       id="text5181" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 667.5,26.900391 L 679.5,26.900391 L 679.5,29.291016 L 667.5,29.291016 L 667.5,26.900391 M 670.20703,48.849609 L 670.20703,45.638672 L 676.79297,45.638672 L 676.79297,48.849609 L 670.20703,48.849609"
+       id="text5187" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 733.33594,9.3222656 L 735.70313,9.3222656 L 735.70313,15.298828 L 741.53906,15.298828 L 741.53906,17.630859 L 735.70313,17.630859 L 735.70313,23.630859 L 733.33594,23.630859 L 733.33594,17.630859 L 727.5,17.630859 L 727.5,15.298828 L 733.33594,15.298828 L 733.33594,9.3222656 M 727.5,47.818359 L 741.53906,47.818359 L 741.53906,50.150391 L 727.5,50.150391 L 727.5,47.818359 M 727.5,42.779297 L 741.53906,42.779297 L 741.53906,45.111328 L 727.5,45.111328 L 727.5,42.779297"
+       id="text5201" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 11.070313,95.601563 L 11.070313,86.148438 L 7.65625,86.148438 L 7.65625,84.09375 L 16.828125,84.09375 L 16.828125,86.148438 L 13.4375,86.148438 L 13.4375,95.601563 L 11.070313,95.601563 M 22.859375,94.546875 C 22.572911,94.989584 22.197911,95.328125 21.734375,95.5625 C 21.270829,95.791666 20.731767,95.90625 20.117188,95.90625 C 19.294269,95.90625 18.658853,95.671875 18.210938,95.203125 C 17.768228,94.734376 17.546874,94.06771 17.546875,93.203125 C 17.546874,92.401045 17.768228,91.789066 18.210938,91.367188 C 18.658853,90.945317 19.395831,90.656255 20.421875,90.5 C 20.656246,90.463547 20.963538,90.42188 21.34375,90.375 C 22.307286,90.250005 22.789057,89.97136 22.789063,89.539063 C 22.789057,89.195319 22.682286,88.950527 22.46875,88.804688 C 22.255203,88.653653 21.898433,88.578132 21.398438,88.578125 C 20.9401,88.578132 20.588538,88.669278 20.34375,88.851563 C 20.098955,89.033861 19.97656,89.294277 19.976563,89.632813 L 19.976563,89.757813 L 17.851563,89.757813 L 17.851563,89.601563 C 17.851562,88.731778 18.158853,88.049487 18.773438,87.554688 C 19.388018,87.054696 20.236976,86.804696 21.320313,86.804688 C 22.507807,86.804696 23.41666,87.010425 24.046875,87.421875 C 24.682284,87.833341 24.999992,88.427091 25,89.203125 L 25,94.03125 C 24.999992,94.385418 25.03645,94.651043 25.109375,94.828125 C 25.182283,95.000001 25.304679,95.130209 25.476563,95.21875 L 25.476563,95.601563 L 23.109375,95.601563 C 23.031244,95.455729 22.971348,95.294271 22.929688,95.117188 C 22.888015,94.940105 22.864577,94.750001 22.859375,94.546875 M 22.820313,91.421875 C 22.450515,91.593754 22.023432,91.731775 21.539063,91.835938 C 21.059892,91.940108 20.812496,91.994795 20.796875,92 C 20.39583,92.114587 20.11458,92.257816 19.953125,92.429688 C 19.796872,92.601566 19.718747,92.838544 19.71875,93.140625 C 19.718747,93.453127 19.82031,93.703127 20.023438,93.890625 C 20.226559,94.072918 20.499997,94.164064 20.84375,94.164063 C 21.458329,94.164064 21.940099,93.992189 22.289063,93.648438 C 22.643224,93.299481 22.820307,92.825524 22.820313,92.226563 L 22.820313,91.421875 M 27.039063,84.09375 L 29.25,84.09375 L 29.25,88.164063 C 29.531246,87.721362 29.882809,87.388029 30.304688,87.164063 C 30.731766,86.934905 31.216141,86.820321 31.757813,86.820313 C 32.783847,86.820321 33.622388,87.2448 34.273438,88.09375 C 34.92447,88.937507 35.249991,90.036464 35.25,91.390625 C 35.249991,92.734378 34.92447,93.820314 34.273438,94.648438 C 33.622388,95.476563 32.773431,95.890625 31.726563,95.890625 C 31.179682,95.890625 30.70312,95.776041 30.296875,95.546875 C 29.895829,95.317709 29.531246,94.953126 29.203125,94.453125 L 29.203125,95.601563 L 27.039063,95.601563 L 27.039063,84.09375 M 32.992188,91.296875 C 32.992181,90.51563 32.828118,89.903652 32.5,89.460938 C 32.171869,89.013027 31.721348,88.789069 31.148438,88.789063 C 30.544266,88.789069 30.075517,89.007819 29.742188,89.445313 C 29.414059,89.87761 29.249997,90.494797 29.25,91.296875 C 29.249997,92.161462 29.406247,92.817711 29.71875,93.265625 C 30.036454,93.713544 30.497391,93.937502 31.101563,93.9375 C 31.71614,93.937502 32.18489,93.713544 32.507813,93.265625 C 32.830722,92.812503 32.992181,92.156253 32.992188,91.296875"
+       id="text5427" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 789.76563,44.369141 L 792.57031,44.369141 C 793.23176,44.369143 793.71353,44.249351 794.01563,44.009766 C 794.3177,43.770185 794.46874,43.392581 794.46875,42.876953 C 794.46874,42.340499 794.3203,41.955083 794.02344,41.720703 C 793.72656,41.481125 793.23697,41.361333 792.55469,41.361328 L 789.76563,41.361328 L 789.76563,44.369141 M 789.76563,39.392578 L 792.46875,39.392578 C 793.05208,39.392585 793.47916,39.293627 793.75,39.095703 C 794.02083,38.892586 794.15624,38.574878 794.15625,38.142578 C 794.15624,37.720712 794.02343,37.416025 793.75781,37.228516 C 793.49739,37.035817 793.06249,36.939463 792.45313,36.939453 L 789.76563,36.939453 L 789.76563,39.392578 M 787.5,46.447266 L 787.5,34.939453 L 792.92188,34.939453 C 794.09895,34.939465 794.99478,35.189464 795.60938,35.689453 C 796.22916,36.184255 796.53905,36.905609 796.53906,37.853516 C 796.53905,38.436857 796.42447,38.923836 796.19531,39.314453 C 795.96614,39.705085 795.62239,40.007168 795.16406,40.220703 C 795.7578,40.460292 796.20051,40.806646 796.49219,41.259766 C 796.78905,41.707687 796.93749,42.267582 796.9375,42.939453 C 796.93749,44.059247 796.57291,44.92383 795.84375,45.533203 C 795.11457,46.142578 794.08072,46.447266 792.74219,46.447266 L 787.5,46.447266 M 803.45313,45.392578 C 803.16666,45.835287 802.79166,46.173828 802.32813,46.408203 C 801.86458,46.63737 801.32552,46.751953 800.71094,46.751953 C 799.88802,46.751953 799.2526,46.517578 798.80469,46.048828 C 798.36198,45.580079 798.14062,44.913413 798.14063,44.048828 C 798.14062,43.246748 798.36198,42.634769 798.80469,42.212891 C 799.2526,41.79102 799.98958,41.501958 801.01563,41.345703 C 801.25,41.30925 801.55729,41.267583 801.9375,41.220703 C 802.90104,41.095708 803.38281,40.817063 803.38281,40.384766 C 803.38281,40.041022 803.27604,39.796231 803.0625,39.650391 C 802.84895,39.499356 802.49218,39.423835 801.99219,39.423828 C 801.53385,39.423835 801.18229,39.514981 800.9375,39.697266 C 800.69271,39.879564 800.57031,40.13998 800.57031,40.478516 L 800.57031,40.603516 L 798.44531,40.603516 L 798.44531,40.447266 C 798.44531,39.577481 798.7526,38.89519 799.36719,38.400391 C 799.98177,37.900399 800.83073,37.650399 801.91406,37.650391 C 803.10156,37.650399 804.01041,37.856128 804.64063,38.267578 C 805.27603,38.679044 805.59374,39.272794 805.59375,40.048828 L 805.59375,44.876953 C 805.59374,45.231121 805.6302,45.496746 805.70313,45.673828 C 805.77603,45.845704 805.89843,45.975912 806.07031,46.064453 L 806.07031,46.447266 L 803.70313,46.447266 C 803.62499,46.301432 803.5651,46.139974 803.52344,45.962891 C 803.48176,45.785808 803.45833,45.595704 803.45313,45.392578 M 803.41406,42.267578 C 803.04427,42.439457 802.61718,42.577478 802.13281,42.681641 C 801.65364,42.785811 801.40625,42.840498 801.39063,42.845703 C 800.98958,42.96029 800.70833,43.103519 800.54688,43.275391 C 800.39062,43.447269 800.3125,43.684248 800.3125,43.986328 C 800.3125,44.29883 800.41406,44.54883 800.61719,44.736328 C 800.82031,44.918621 801.09375,45.009767 801.4375,45.009766 C 802.05208,45.009767 802.53385,44.837892 802.88281,44.494141 C 803.23697,44.145185 803.41406,43.671227 803.41406,43.072266 L 803.41406,42.267578 M 812.71875,43.244141 L 814.96094,43.244141 C 814.86718,44.322268 814.47395,45.173829 813.78125,45.798828 C 813.08854,46.423828 812.19791,46.736328 811.10938,46.736328 C 809.875,46.736328 808.90625,46.335287 808.20313,45.533203 C 807.50521,44.725913 807.15625,43.611331 807.15625,42.189453 C 807.15625,40.772792 807.51302,39.663418 808.22656,38.861328 C 808.94531,38.054045 809.93229,37.650399 811.1875,37.650391 C 812.28645,37.650399 813.16666,37.942066 813.82813,38.525391 C 814.49478,39.108731 814.86718,39.92123 814.94531,40.962891 L 812.6875,40.962891 C 812.62499,40.509772 812.46614,40.163418 812.21094,39.923828 C 811.95572,39.684252 811.61979,39.56446 811.20313,39.564453 C 810.64062,39.56446 810.21875,39.785814 809.9375,40.228516 C 809.66146,40.67123 809.52343,41.335292 809.52344,42.220703 C 809.52343,43.038415 809.66666,43.668623 809.95313,44.111328 C 810.24479,44.54883 810.66145,44.76758 811.20313,44.767578 C 811.62499,44.76758 811.96354,44.639976 812.21875,44.384766 C 812.47395,44.12956 812.64062,43.749352 812.71875,43.244141 M 816.44531,46.447266 L 816.44531,34.939453 L 818.65625,34.939453 L 818.65625,40.978516 L 821.35938,37.955078 L 824.09375,37.955078 L 821.13281,41.103516 L 824.27344,46.447266 L 821.54688,46.447266 L 819.51563,42.830078 L 818.65625,43.759766 L 818.65625,46.447266 L 816.44531,46.447266 M 824.79688,43.681641 L 827.0625,43.681641 C 827.08333,44.113935 827.23958,44.436851 827.53125,44.650391 C 827.82291,44.858726 828.26041,44.962892 828.84375,44.962891 C 829.28645,44.962892 829.6276,44.889976 829.86719,44.744141 C 830.11197,44.593101 830.23437,44.382164 830.23438,44.111328 C 830.23437,43.725914 829.78124,43.436852 828.875,43.244141 C 828.5052,43.166019 828.21093,43.098311 827.99219,43.041016 C 826.88802,42.759769 826.11979,42.426436 825.6875,42.041016 C 825.26042,41.655604 825.04687,41.134771 825.04688,40.478516 C 825.04687,39.608731 825.35937,38.921231 825.98438,38.416016 C 826.61458,37.905608 827.46614,37.650399 828.53906,37.650391 C 829.67447,37.650399 830.5651,37.903003 831.21094,38.408203 C 831.86197,38.913419 832.20833,39.624356 832.25,40.541016 L 830.03906,40.541016 C 830.02343,40.181647 829.88541,39.903001 829.625,39.705078 C 829.36979,39.507168 829.01302,39.40821 828.55469,39.408203 C 828.12239,39.40821 827.79948,39.473314 827.58594,39.603516 C 827.3776,39.733731 827.27343,39.929043 827.27344,40.189453 C 827.27343,40.528001 827.83854,40.82748 828.96875,41.087891 C 829.22916,41.145188 829.43489,41.192063 829.58594,41.228516 C 830.71614,41.494146 831.48697,41.814458 831.89844,42.189453 C 832.3151,42.564457 832.52343,43.093102 832.52344,43.775391 C 832.52343,44.738934 832.18228,45.473308 831.5,45.978516 C 830.82291,46.483724 829.83593,46.736328 828.53906,46.736328 C 827.36718,46.736328 826.45052,46.473307 825.78906,45.947266 C 825.1276,45.421225 824.79687,44.697267 824.79688,43.775391 L 824.79688,43.681641 M 840.02344,42.251953 C 840.02343,41.397792 839.86197,40.74675 839.53906,40.298828 C 839.21614,39.84571 838.74739,39.619147 838.13281,39.619141 C 837.52864,39.619147 837.0677,39.843106 836.75,40.291016 C 836.4375,40.738938 836.28125,41.392583 836.28125,42.251953 C 836.28125,43.05404 836.44531,43.673831 836.77344,44.111328 C 837.10677,44.54883 837.57552,44.76758 838.17969,44.767578 C 838.7526,44.76758 839.20312,44.543622 839.53125,44.095703 C 839.85937,43.647789 840.02343,43.033207 840.02344,42.251953 M 834.07031,49.853516 L 834.07031,37.955078 L 836.23438,37.955078 L 836.23438,39.103516 C 836.5625,38.603523 836.92708,38.23894 837.32813,38.009766 C 837.73437,37.780608 838.21093,37.666024 838.75781,37.666016 C 839.80468,37.666024 840.65364,38.080086 841.30469,38.908203 C 841.95572,39.731127 842.28124,40.814459 842.28125,42.158203 C 842.28124,43.517581 841.95572,44.621747 841.30469,45.470703 C 840.65364,46.314453 839.8151,46.736328 838.78906,46.736328 C 838.24739,46.736328 837.76302,46.621745 837.33594,46.392578 C 836.91406,46.163412 836.5625,45.830079 836.28125,45.392578 L 836.28125,49.853516 L 834.07031,49.853516 M 848.70313,45.392578 C 848.41666,45.835287 848.04166,46.173828 847.57813,46.408203 C 847.11458,46.63737 846.57552,46.751953 845.96094,46.751953 C 845.13802,46.751953 844.5026,46.517578 844.05469,46.048828 C 843.61198,45.580079 843.39062,44.913413 843.39063,44.048828 C 843.39062,43.246748 843.61198,42.634769 844.05469,42.212891 C 844.5026,41.79102 845.23958,41.501958 846.26563,41.345703 C 846.5,41.30925 846.80729,41.267583 847.1875,41.220703 C 848.15104,41.095708 848.63281,40.817063 848.63281,40.384766 C 848.63281,40.041022 848.52604,39.796231 848.3125,39.650391 C 848.09895,39.499356 847.74218,39.423835 847.24219,39.423828 C 846.78385,39.423835 846.43229,39.514981 846.1875,39.697266 C 845.94271,39.879564 845.82031,40.13998 845.82031,40.478516 L 845.82031,40.603516 L 843.69531,40.603516 L 843.69531,40.447266 C 843.69531,39.577481 844.0026,38.89519 844.61719,38.400391 C 845.23177,37.900399 846.08073,37.650399 847.16406,37.650391 C 848.35156,37.650399 849.26041,37.856128 849.89063,38.267578 C 850.52603,38.679044 850.84374,39.272794 850.84375,40.048828 L 850.84375,44.876953 C 850.84374,45.231121 850.8802,45.496746 850.95313,45.673828 C 851.02603,45.845704 851.14843,45.975912 851.32031,46.064453 L 851.32031,46.447266 L 848.95313,46.447266 C 848.87499,46.301432 848.8151,46.139974 848.77344,45.962891 C 848.73176,45.785808 848.70833,45.595704 848.70313,45.392578 M 848.66406,42.267578 C 848.29427,42.439457 847.86718,42.577478 847.38281,42.681641 C 846.90364,42.785811 846.65625,42.840498 846.64063,42.845703 C 846.23958,42.96029 845.95833,43.103519 845.79688,43.275391 C 845.64062,43.447269 845.5625,43.684248 845.5625,43.986328 C 845.5625,44.29883 845.66406,44.54883 845.86719,44.736328 C 846.07031,44.918621 846.34375,45.009767 846.6875,45.009766 C 847.30208,45.009767 847.78385,44.837892 848.13281,44.494141 C 848.48697,44.145185 848.66406,43.671227 848.66406,43.072266 L 848.66406,42.267578 M 857.96875,43.244141 L 860.21094,43.244141 C 860.11718,44.322268 859.72395,45.173829 859.03125,45.798828 C 858.33854,46.423828 857.44791,46.736328 856.35938,46.736328 C 855.125,46.736328 854.15625,46.335287 853.45313,45.533203 C 852.75521,44.725913 852.40625,43.611331 852.40625,42.189453 C 852.40625,40.772792 852.76302,39.663418 853.47656,38.861328 C 854.19531,38.054045 855.18229,37.650399 856.4375,37.650391 C 857.53645,37.650399 858.41666,37.942066 859.07813,38.525391 C 859.74478,39.108731 860.11718,39.92123 860.19531,40.962891 L 857.9375,40.962891 C 857.87499,40.509772 857.71614,40.163418 857.46094,39.923828 C 857.20572,39.684252 856.86979,39.56446 856.45313,39.564453 C 855.89062,39.56446 855.46875,39.785814 855.1875,40.228516 C 854.91146,40.67123 854.77343,41.335292 854.77344,42.220703 C 854.77343,43.038415 854.91666,43.668623 855.20313,44.111328 C 855.49479,44.54883 855.91145,44.76758 856.45313,44.767578 C 856.87499,44.76758 857.21354,44.639976 857.46875,44.384766 C 857.72395,44.12956 857.89062,43.749352 857.96875,43.244141 M 866.88281,43.869141 L 869.14844,43.869141 C 868.91926,44.764976 868.45572,45.4681 867.75781,45.978516 C 867.0651,46.483724 866.21874,46.736328 865.21875,46.736328 C 863.98958,46.736328 863.01562,46.32487 862.29688,45.501953 C 861.57812,44.67383 861.21875,43.554039 861.21875,42.142578 C 861.21875,40.751959 861.57292,39.655606 862.28125,38.853516 C 862.98958,38.051441 863.95833,37.650399 865.1875,37.650391 C 866.48958,37.650399 867.49478,38.046232 868.20313,38.837891 C 868.91145,39.624356 869.26562,40.74675 869.26563,42.205078 C 869.26562,42.366541 869.26301,42.488936 869.25781,42.572266 C 869.2578,42.650394 869.2526,42.725915 869.24219,42.798828 L 863.57031,42.798828 C 863.60156,43.465498 863.76302,43.968101 864.05469,44.306641 C 864.35156,44.645184 864.77604,44.814455 865.32813,44.814453 C 865.71874,44.814455 866.03906,44.738934 866.28906,44.587891 C 866.53906,44.431643 866.73697,44.19206 866.88281,43.869141 M 863.57031,41.306641 L 866.91406,41.306641 C 866.89322,40.73373 866.73958,40.298834 866.45313,40.001953 C 866.17187,39.699877 865.76562,39.548835 865.23438,39.548828 C 864.73958,39.548835 864.34895,39.699877 864.0625,40.001953 C 863.78125,40.304043 863.61718,40.738938 863.57031,41.306641"
+       id="text5207" />
+    <path
+       style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1"
+       d="M 840,17.646484 L 797.02608,17.646484"
+       id="path5439" />
+    <path
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 802.5,25.146484 L 802.5,10.146484 L 787.5,17.646484 L 802.5,25.146484 z "
+       id="path5441" />
+    <g
+       id="g5459"
+       transform="translate(0,7.5)">
+      <path
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 82.50003,75 L 54.020182,75"
+         id="path5453" />
+      <path
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z "
+         id="path5455" />
+      <path
+         id="path5457"
+         d="M 45,67.5 C 45,82.5 45,82.5 45,82.5"
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+    </g>
+    <g
+       id="g5464"
+       transform="matrix(-1,9.581637e-17,-9.581637e-17,-1,127.5,172.5)">
+      <path
+         id="path5466"
+         d="M 82.50003,75 L 54.020182,75"
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3.00000024;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+      <path
+         id="path5468"
+         d="M 60,82.5 L 60,67.5 L 45,75 L 60,82.5 z "
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+      <path
+         style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 45,67.5 C 45,82.5 45,82.5 45,82.5"
+         id="path5470" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 107.0625,80.560547 L 105.23438,78.779297 L 107.17969,76.763672 L 109.05469,78.591797 C 109.30467,78.123052 109.49608,77.587897 109.62891,76.986328 C 109.7617,76.384773 109.82811,75.728524 109.82813,75.017578 C 109.82811,73.119151 109.40233,71.646496 108.55078,70.599609 C 107.69921,69.544936 106.5078,69.017593 104.97656,69.017578 C 103.46093,69.017593 102.28124,69.54103 101.4375,70.587891 C 100.59374,71.634778 100.17187,73.111339 100.17188,75.017578 C 100.17187,76.916022 100.59374,78.392583 101.4375,79.447266 C 102.28124,80.494144 103.46093,81.017581 104.97656,81.017578 C 105.36718,81.017581 105.73436,80.978518 106.07813,80.900391 C 106.42968,80.822268 106.7578,80.708987 107.0625,80.560547 M 109.55859,82.916016 C 108.97264,83.306641 108.28905,83.603516 107.50781,83.806641 C 106.73436,84.009765 105.89061,84.111328 104.97656,84.111328 C 102.39843,84.111328 100.34765,83.291016 98.824219,81.650391 C 97.308592,80.009769 96.55078,77.798834 96.550781,75.017578 C 96.55078,72.228527 97.308592,70.017592 98.824219,68.384766 C 100.34765,66.744158 102.39843,65.923846 104.97656,65.923828 C 107.55468,65.923846 109.60545,66.744158 111.12891,68.384766 C 112.66014,70.025404 113.42576,72.23634 113.42578,75.017578 C 113.42576,76.236336 113.26951,77.353522 112.95703,78.369141 C 112.64451,79.376957 112.18358,80.259769 111.57422,81.017578 L 113.44922,82.810547 L 111.52734,84.826172 L 109.55859,82.916016"
+       id="text5474" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 158.94141,83.630859 L 153.99609,66.369141 L 157.67578,66.369141 L 160.62891,78.544922 L 163.125,66.369141 L 166.91016,66.369141 L 169.40625,78.544922 L 172.35938,66.369141 L 176.00391,66.369141 L 171.07031,83.630859 L 167.68359,83.630859 L 165.01172,70.412109 L 162.32813,83.630859 L 158.94141,83.630859"
+       id="text5482" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 218.52539,83.630859 L 218.52539,66.369141 L 231.05273,66.369141 L 231.05273,69.369141 L 222.0293,69.369141 L 222.0293,73.048828 L 230.2793,73.048828 L 230.2793,76.001953 L 222.0293,76.001953 L 222.0293,80.443359 L 231.47461,80.443359 L 231.47461,83.630859 L 218.52539,83.630859"
+       id="text5492" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 281.4375,73.916016 L 285.60938,73.916016 C 286.51561,73.916025 287.17968,73.732432 287.60156,73.365234 C 288.03124,72.998058 288.24608,72.419933 288.24609,71.630859 C 288.24608,70.880872 288.03905,70.314466 287.625,69.931641 C 287.21093,69.54103 286.59374,69.345717 285.77344,69.345703 L 281.4375,69.345703 L 281.4375,73.916016 M 277.88672,83.630859 L 277.88672,66.369141 L 286.25391,66.369141 C 288.13671,66.369158 289.53124,66.771501 290.4375,67.576172 C 291.34373,68.380875 291.79686,69.611342 291.79688,71.267578 C 291.79686,72.322277 291.5742,73.201182 291.12891,73.904297 C 290.69139,74.607431 290.05858,75.087899 289.23047,75.345703 C 289.98045,75.611336 290.5117,76.017586 290.82422,76.564453 C 291.14452,77.111335 291.32811,77.962896 291.375,79.119141 L 291.44531,81.158203 C 291.4453,81.173831 291.4453,81.197268 291.44531,81.228516 C 291.46873,82.259767 291.69139,82.884766 292.11328,83.103516 L 292.11328,83.630859 L 288.22266,83.630859 C 288.09764,83.388672 287.99999,83.091797 287.92969,82.740234 C 287.86718,82.380861 287.82811,81.95508 287.8125,81.462891 L 287.76563,79.646484 C 287.72655,78.576177 287.52343,77.853521 287.15625,77.478516 C 286.79686,77.103522 286.14452,76.916022 285.19922,76.916016 L 281.4375,76.916016 L 281.4375,83.630859 L 277.88672,83.630859"
+       id="text5500" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 343.24219,83.630859 L 343.24219,69.451172 L 338.12109,69.451172 L 338.12109,66.369141 L 351.87891,66.369141 L 351.87891,69.451172 L 346.79297,69.451172 L 346.79297,83.630859 L 343.24219,83.630859"
+       id="text5504" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 407.06836,83.630859 L 403.51758,83.630859 L 403.51758,77.197266 L 397.24805,66.369141 L 401.5957,66.369141 L 405.28711,73.810547 L 408.69727,66.369141 L 412.75195,66.369141 L 407.06836,77.197266 L 407.06836,83.630859"
+       id="text5518" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 458.08594,66.105469 L 461.67188,66.105469 L 461.67188,76.933594 C 461.67187,78.269536 461.93749,79.246098 462.46875,79.863281 C 462.99999,80.472659 463.84374,80.777346 465,80.777344 C 466.17187,80.777346 467.02343,80.472659 467.55469,79.863281 C 468.09374,79.25391 468.36327,78.277349 468.36328,76.933594 L 468.36328,66.105469 L 471.91406,66.105469 L 471.91406,77.320313 C 471.91405,79.437504 471.3203,81.062502 470.13281,82.195313 C 468.95311,83.328125 467.24999,83.894531 465.02344,83.894531 C 462.78124,83.894531 461.0625,83.332031 459.86719,82.207031 C 458.67969,81.074221 458.08594,79.445316 458.08594,77.320313 L 458.08594,66.105469"
+       id="text5522" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 523.22461,83.630859 L 523.22461,66.369141 L 526.77539,66.369141 L 526.77539,83.630859 L 523.22461,83.630859"
+       id="text5526" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 580.18359,75 C 580.18359,76.898444 580.60546,78.375005 581.44922,79.429688 C 582.29296,80.476566 583.47265,81.000003 584.98828,81 C 586.51952,81.000003 587.71093,80.476566 588.5625,79.429688 C 589.41405,78.375005 589.83983,76.898444 589.83984,75 C 589.83983,73.101573 589.41405,71.628918 588.5625,70.582031 C 587.71093,69.527358 586.51952,69.000015 584.98828,69 C 583.47265,69.000015 582.29296,69.523452 581.44922,70.570313 C 580.60546,71.617199 580.18359,73.093761 580.18359,75 M 576.5625,75 C 576.5625,72.210949 577.32031,70.000014 578.83594,68.367188 C 580.35937,66.726579 582.41015,65.906268 584.98828,65.90625 C 587.56639,65.906268 589.61717,66.726579 591.14063,68.367188 C 592.67186,70.007826 593.43748,72.218761 593.4375,75 C 593.43748,77.781256 592.67186,79.992191 591.14063,81.632813 C 589.61717,83.273438 587.56639,84.09375 584.98828,84.09375 C 582.41015,84.09375 580.35937,83.273438 578.83594,81.632813 C 577.32031,79.992191 576.5625,77.781256 576.5625,75"
+       id="text5530" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 641.97656,74.361328 L 645.41016,74.361328 C 646.33983,74.361337 647.01561,74.166025 647.4375,73.775391 C 647.85936,73.376963 648.0703,72.740245 648.07031,71.865234 C 648.0703,71.044934 647.86327,70.423841 647.44922,70.001953 C 647.03515,69.580092 646.41796,69.369155 645.59766,69.369141 L 641.97656,69.369141 L 641.97656,74.361328 M 641.95313,77.490234 L 641.95313,83.630859 L 638.40234,83.630859 L 638.40234,66.369141 L 646.07813,66.369141 C 647.89061,66.369158 649.26171,66.841814 650.19141,67.787109 C 651.12889,68.724624 651.59764,70.103529 651.59766,71.923828 C 651.59764,73.705088 651.14061,75.080087 650.22656,76.048828 C 649.31249,77.009772 648.0078,77.490241 646.3125,77.490234 L 641.95313,77.490234"
+       id="text5534" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 709.24805,63.919922 L 709.24805,66.369141 C 709.17772,66.369155 709.08007,66.365249 708.95508,66.357422 C 708.83007,66.349624 708.74413,66.345718 708.69727,66.345703 C 707.90819,66.345718 707.37304,66.498062 707.0918,66.802734 C 706.81835,67.099624 706.68163,67.732435 706.68164,68.701172 L 706.68164,71.513672 C 706.68163,72.66993 706.50585,73.490242 706.1543,73.974609 C 705.80273,74.458991 705.16992,74.806647 704.25586,75.017578 C 705.16992,75.228522 705.80273,75.572271 706.1543,76.048828 C 706.50585,76.525395 706.68163,77.341801 706.68164,78.498047 L 706.68164,81.322266 C 706.68163,82.283202 706.81835,82.912108 707.0918,83.208984 C 707.36523,83.505857 707.90038,83.654294 708.69727,83.654297 C 708.74413,83.654294 708.83007,83.650388 708.95508,83.642578 C 709.08007,83.634763 709.17772,83.630857 709.24805,83.630859 L 709.24805,86.080078 C 709.13866,86.080073 708.98632,86.08398 708.79102,86.091797 C 708.59569,86.099605 708.45116,86.103511 708.35742,86.103516 C 707.57616,86.103511 706.92382,86.056636 706.40039,85.962891 C 705.87695,85.869136 705.43163,85.724605 705.06445,85.529297 C 704.61913,85.263668 704.30273,84.904293 704.11523,84.451172 C 703.93554,84.005857 703.8457,83.228514 703.8457,82.119141 L 703.8457,79.166016 C 703.8457,78.095706 703.64648,77.337895 703.24805,76.892578 C 702.84961,76.439458 702.17773,76.212896 701.23242,76.212891 C 701.18554,76.212896 701.10742,76.216802 700.99805,76.224609 C 700.88867,76.232427 700.80664,76.236333 700.75195,76.236328 L 700.75195,73.787109 C 700.80664,73.787117 700.88867,73.791023 700.99805,73.798828 C 701.10742,73.806648 701.18554,73.810554 701.23242,73.810547 C 702.16992,73.810554 702.83789,73.583992 703.23633,73.130859 C 703.64257,72.677743 703.8457,71.912119 703.8457,70.833984 L 703.8457,67.904297 C 703.8457,66.787124 703.93554,66.001968 704.11523,65.548828 C 704.30273,65.095719 704.61913,64.736345 705.06445,64.470703 C 705.43163,64.275408 705.87695,64.130876 706.40039,64.037109 C 706.92382,63.943377 707.57616,63.896502 708.35742,63.896484 C 708.45116,63.896502 708.59569,63.900408 708.79102,63.908203 C 708.98632,63.916033 709.13866,63.919939 709.24805,63.919922 M 703.0957,93.966797 L 709.01367,93.966797 L 709.01367,96.462891 L 706.25977,96.462891 L 706.25977,113.8418 L 709.01367,113.8418 L 709.01367,116.33789 L 703.0957,116.33789 L 703.0957,93.966797"
+       id="text5546" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 760.75195,63.908203 L 761.54883,63.908203 C 762.4082,63.90822 763.09961,63.955095 763.62305,64.048828 C 764.14648,64.142595 764.58398,64.291033 764.93555,64.494141 C 765.38085,64.744157 765.69335,65.103532 765.87305,65.572266 C 766.06054,66.033218 766.15429,66.806655 766.1543,67.892578 L 766.1543,70.845703 C 766.15429,71.916025 766.35351,72.677743 766.75195,73.130859 C 767.15038,73.57618 767.82226,73.798836 768.76758,73.798828 C 768.81444,73.798836 768.89257,73.794929 769.00195,73.787109 C 769.11132,73.779304 769.19335,73.775398 769.24805,73.775391 L 769.24805,76.224609 L 768.81445,76.224609 C 767.83788,76.224614 767.15038,76.443364 766.75195,76.880859 C 766.35351,77.318363 766.15429,78.076175 766.1543,79.154297 L 766.1543,82.107422 C 766.15429,83.224607 766.06054,84.009763 765.87305,84.462891 C 765.69335,84.916012 765.38085,85.267574 764.93555,85.517578 C 764.56835,85.712886 764.12304,85.857417 763.59961,85.951172 C 763.07617,86.044917 762.42382,86.091792 761.64258,86.091797 C 761.54883,86.091792 761.40429,86.087886 761.20898,86.080078 C 761.01367,86.072261 760.86133,86.068355 760.75195,86.068359 L 760.75195,83.619141 C 760.82226,83.619138 760.91992,83.623044 761.04492,83.630859 C 761.16992,83.638669 761.25586,83.642576 761.30273,83.642578 C 762.09179,83.642576 762.62304,83.490232 762.89648,83.185547 C 763.17773,82.88867 763.31836,82.263671 763.31836,81.310547 L 763.31836,78.509766 C 763.31836,77.337895 763.49414,76.513677 763.8457,76.037109 C 764.19726,75.55274 764.83007,75.20899 765.74414,75.005859 C 764.83007,74.794928 764.19726,74.447272 763.8457,73.962891 C 763.49414,73.478523 763.31836,72.658212 763.31836,71.501953 L 763.31836,68.666016 C 763.31836,67.712904 763.17773,67.087905 762.89648,66.791016 C 762.62304,66.486343 762.09179,66.333999 761.30273,66.333984 C 761.25586,66.333999 761.16992,66.337906 761.04492,66.345703 C 760.91992,66.35353 760.82226,66.357437 760.75195,66.357422 L 760.75195,63.908203 M 767.00977,93.955078 L 767.00977,116.32617 L 761.08008,116.32617 L 761.08008,113.83008 L 763.8457,113.83008 L 763.8457,96.451172 L 761.08008,96.451172 L 761.08008,93.955078 L 767.00977,93.955078"
+       id="text5554" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 823.79883,62.977287 L 826.21289,62.977287 L 826.21289,86.977287 L 823.79883,86.977287 L 823.79883,62.977287 M 827.10352,113.54369 L 821.29102,93.6101 L 822.87305,93.6101 L 828.70898,113.54369 L 827.10352,113.54369"
+       id="text5564" />
+    <g
+       id="g3597">
+      <path
+         id="text5570"
+         d="M 22.996094,139.10156 C 22.907541,140.40886 22.403635,141.44792 21.484375,142.21875 C 20.565095,142.98958 19.365878,143.375 17.886719,143.375 C 16.183589,143.375 14.859372,142.84375 13.914063,141.78125 C 12.968749,140.71875 12.496093,139.22917 12.496094,137.3125 C 12.496093,135.35417 12.977863,133.85418 13.941406,132.8125 C 14.904945,131.77084 16.29036,131.25001 18.097656,131.25 C 19.566398,131.25001 20.726554,131.60808 21.578125,132.32422 C 22.429677,133.04037 22.897124,134.05209 22.980469,135.35938 L 20.644531,135.35938 C 20.545564,134.70834 20.279939,134.21225 19.847656,133.87109 C 19.415357,133.52996 18.832024,133.35938 18.097656,133.35938 C 17.055984,133.35938 16.264318,133.69532 15.722656,134.36719 C 15.180986,135.03907 14.910153,136.02084 14.910156,137.3125 C 14.910153,138.5625 15.179684,139.52865 15.71875,140.21094 C 16.257808,140.89323 17.024734,141.23438 18.019531,141.23438 C 18.738274,141.23438 19.326815,141.05078 19.785156,140.68359 C 20.243481,140.31641 20.540356,139.78907 20.675781,139.10156 L 22.996094,139.10156 z M 29.558594,142 C 29.27213,142.44271 28.89713,142.77995 28.433594,143.01172 C 27.970048,143.24349 27.430986,143.35937 26.816406,143.35938 C 25.993487,143.35937 25.359373,143.125 24.914063,142.65625 C 24.468749,142.1875 24.246093,141.52083 24.246094,140.65625 C 24.246093,139.85417 24.468749,139.24219 24.914063,138.82031 C 25.359373,138.39844 26.09505,138.10938 27.121094,137.95313 C 27.355465,137.91667 27.662756,137.87501 28.042969,137.82813 C 29.006505,137.70313 29.488275,137.42448 29.488281,136.99219 C 29.488275,136.64844 29.381505,136.40235 29.167969,136.25391 C 28.954422,136.10548 28.597651,136.03126 28.097656,136.03125 C 27.639319,136.03126 27.287757,136.1224 27.042969,136.30469 C 26.798174,136.48699 26.675778,136.7474 26.675781,137.08594 L 26.675781,137.21094 L 24.550781,137.21094 L 24.550781,137.05469 C 24.55078,136.1849 24.858072,135.50131 25.472656,135.00391 C 26.087237,134.50652 26.936195,134.25782 28.019531,134.25781 C 29.207026,134.25782 30.117181,134.46355 30.75,134.875 C 31.382805,135.28647 31.699211,135.88022 31.699219,136.65625 L 31.699219,141.48438 C 31.699211,141.83854 31.735669,142.10287 31.808594,142.27734 C 31.881502,142.45182 32.003898,142.58333 32.175781,142.67188 L 32.175781,143.05469 L 29.808594,143.05469 C 29.730463,142.90885 29.670567,142.7474 29.628906,142.57031 C 29.587234,142.39323 29.563796,142.20313 29.558594,142 L 29.558594,142 z M 29.519531,138.875 C 29.149734,139.04688 28.723953,139.1849 28.242188,139.28906 C 27.760413,139.39323 27.511715,139.44792 27.496094,139.45313 C 27.095049,139.56771 26.815101,139.71094 26.65625,139.88281 C 26.497393,140.05469 26.417966,140.29167 26.417969,140.59375 C 26.417966,140.90625 26.519528,141.15495 26.722656,141.33984 C 26.925778,141.52474 27.199215,141.61719 27.542969,141.61719 C 28.157548,141.61719 28.64062,141.44401 28.992188,141.09766 C 29.343744,140.7513 29.519525,140.27865 29.519531,139.67969 L 29.519531,138.875 z M 39.691406,138.85938 C 39.691399,138.00521 39.529941,137.35287 39.207031,136.90234 C 38.884108,136.45183 38.415359,136.22657 37.800781,136.22656 C 37.19661,136.22657 36.736975,136.45053 36.421875,136.89844 C 36.106767,137.34636 35.949216,138.00001 35.949219,138.85938 C 35.949216,139.66146 36.11458,140.28125 36.445313,140.71875 C 36.776038,141.15625 37.243485,141.375 37.847656,141.375 C 38.420567,141.375 38.871088,141.15104 39.199219,140.70313 C 39.527337,140.25521 39.691399,139.64063 39.691406,138.85938 L 39.691406,138.85938 z M 33.738281,146.46094 L 33.738281,134.5625 L 35.902344,134.5625 L 35.902344,135.71094 C 36.230465,135.21095 36.59635,134.84636 37,134.61719 C 37.403641,134.38803 37.878901,134.27345 38.425781,134.27344 C 39.472649,134.27345 40.321607,134.68621 40.972656,135.51172 C 41.623689,136.33725 41.94921,137.42188 41.949219,138.76563 C 41.94921,140.125 41.623689,141.22787 40.972656,142.07422 C 40.321607,142.92057 39.483066,143.34375 38.457031,143.34375 C 37.915359,143.34375 37.432287,143.22917 37.007813,143 C 36.583329,142.77083 36.230465,142.4375 35.949219,142 L 35.949219,146.46094 L 33.738281,146.46094 z M 43.027344,140.28906 L 45.292969,140.28906 C 45.313799,140.72136 45.470049,141.04297 45.761719,141.25391 C 46.053382,141.46485 46.490881,141.57031 47.074219,141.57031 C 47.516922,141.57031 47.85937,141.4961 48.101563,141.34766 C 48.343744,141.19922 48.464838,140.98959 48.464844,140.71875 C 48.464838,140.33334 48.011713,140.04427 47.105469,139.85156 C 46.735673,139.77344 46.441402,139.70573 46.222656,139.64844 C 45.118487,139.36719 44.351561,139.03386 43.921875,138.64844 C 43.492187,138.26303 43.277343,137.74219 43.277344,137.08594 C 43.277343,136.21615 43.591145,135.52735 44.21875,135.01953 C 44.846352,134.51173 45.696611,134.25782 46.769531,134.25781 C 47.904943,134.25782 48.796869,134.51043 49.445313,135.01563 C 50.093742,135.52084 50.438794,136.23178 50.480469,137.14844 L 48.269531,137.14844 C 48.253901,136.78907 48.117182,136.51042 47.859375,136.3125 C 47.601557,136.11459 47.243485,136.01563 46.785156,136.01563 C 46.352861,136.01563 46.031246,136.08074 45.820313,136.21094 C 45.609372,136.34115 45.503903,136.53646 45.503906,136.79688 C 45.503903,137.13542 46.069007,137.4349 47.199219,137.69531 C 47.45963,137.75261 47.665359,137.79948 47.816406,137.83594 C 48.946608,138.10157 49.718743,138.42188 50.132813,138.79688 C 50.546867,139.17188 50.753898,139.70052 50.753906,140.38281 C 50.753898,141.34636 50.414055,142.08073 49.734375,142.58594 C 49.054681,143.09115 48.066401,143.34375 46.769531,143.34375 C 45.597653,143.34375 44.680987,143.08073 44.019531,142.55469 C 43.358072,142.02865 43.027343,141.30469 43.027344,140.38281 L 43.027344,140.28906 z M 57.011719,143.05469 L 57.011719,131.54688 L 59.378906,131.54688 L 59.378906,140.92969 L 64.996094,140.92969 L 64.996094,143.05469 L 57.011719,143.05469 z M 67.972656,138.79688 C 67.972653,139.64063 68.14583,140.29167 68.492188,140.75 C 68.838538,141.20834 69.332027,141.4375 69.972656,141.4375 C 70.602859,141.4375 71.09114,141.20834 71.4375,140.75 C 71.783847,140.29167 71.957024,139.64063 71.957031,138.79688 C 71.957024,137.95834 71.78515,137.3112 71.441406,136.85547 C 71.09765,136.39975 70.608067,136.17188 69.972656,136.17188 C 69.332027,136.17188 68.838538,136.39975 68.492188,136.85547 C 68.14583,137.3112 67.972653,137.95834 67.972656,138.79688 L 67.972656,138.79688 z M 65.667969,138.79688 C 65.667968,137.38542 66.05078,136.27605 66.816406,135.46875 C 67.582029,134.66147 68.634111,134.25782 69.972656,134.25781 C 71.305983,134.25782 72.356764,134.66147 73.125,135.46875 C 73.89322,136.27605 74.277335,137.38542 74.277344,138.79688 C 74.277335,140.21354 73.89322,141.32552 73.125,142.13281 C 72.356764,142.9401 71.305983,143.34375 69.972656,143.34375 C 68.634111,143.34375 67.582029,142.9401 66.816406,142.13281 C 66.05078,141.32552 65.667968,140.21354 65.667969,138.79688 L 65.667969,138.79688 z M 80.949219,139.85156 L 83.191406,139.85156 C 83.097648,140.92969 82.704419,141.78125 82.011719,142.40625 C 81.319004,143.03125 80.42838,143.34375 79.339844,143.34375 C 78.105465,143.34375 77.138019,142.94141 76.4375,142.13672 C 75.736978,141.33203 75.386718,140.21875 75.386719,138.79688 C 75.386718,137.38021 75.744791,136.26954 76.460938,135.46484 C 77.177081,134.66016 78.162757,134.25782 79.417969,134.25781 C 80.516921,134.25782 81.398431,134.54949 82.0625,135.13281 C 82.726555,135.71615 83.097648,136.52865 83.175781,137.57031 L 80.917969,137.57031 C 80.855463,137.11719 80.696609,136.77084 80.441406,136.53125 C 80.186193,136.29167 79.850255,136.17188 79.433594,136.17188 C 78.87109,136.17188 78.450517,136.39324 78.171875,136.83594 C 77.893226,137.27865 77.753903,137.94271 77.753906,138.82813 C 77.753903,139.64584 77.898434,140.27474 78.1875,140.71484 C 78.476559,141.15495 78.891923,141.375 79.433594,141.375 C 79.855464,141.375 80.194005,141.2474 80.449219,140.99219 C 80.704421,140.73698 80.871088,140.35677 80.949219,139.85156 L 80.949219,139.85156 z M 84.675781,143.05469 L 84.675781,131.54688 L 86.886719,131.54688 L 86.886719,137.58594 L 89.589844,134.5625 L 92.324219,134.5625 L 89.363281,137.71094 L 92.503906,143.05469 L 89.777344,143.05469 L 87.746094,139.4375 L 86.886719,140.36719 L 86.886719,143.05469 L 84.675781,143.05469 z "
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" />
+      <path
+         id="path5584"
+         d="M 23.746094,146.25 L 12.496094,161.25 L 19.996094,161.25 L 19.996094,168.75 L 27.496094,168.75 L 27.496094,161.25 L 34.996094,161.25 L 23.746094,146.25 z M 22.714844,150.46875 L 24.746094,150.46875 L 27.871094,159.09375 L 25.996094,159.09375 L 25.402344,157.3125 L 22.058594,157.3125 L 21.496094,159.09375 L 19.621094,159.09375 L 22.714844,150.46875 z M 23.746094,152.1875 L 22.527344,155.84375 L 24.933594,155.84375 L 23.746094,152.1875 z "
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 119.9707,129.82617 L 117.58008,137.17383 L 122.37305,137.17383 L 119.9707,129.82617 M 117.9082,126.36914 L 122.00977,126.36914 L 128.23242,143.63086 L 124.50586,143.63086 L 123.33398,140.08008 L 116.64258,140.08008 L 115.50586,143.63086 L 111.76758,143.63086 L 117.9082,126.36914"
+       id="text5641" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 172.98047,138.29297 L 176.48438,138.29297 C 176.61718,139.23829 177.0039,139.94141 177.64453,140.40234 C 178.28515,140.85547 179.21093,141.08203 180.42188,141.08203 C 181.45312,141.08203 182.23046,140.89844 182.75391,140.53125 C 183.27733,140.16407 183.53905,139.6211 183.53906,138.90234 C 183.53905,137.85547 182.03515,136.98829 179.02734,136.30078 C 178.98827,136.29298 178.95312,136.28516 178.92188,136.27734 C 178.84374,136.26173 178.72265,136.23438 178.55859,136.19531 C 176.94921,135.84376 175.80078,135.44923 175.11328,135.01172 C 174.5039,134.6211 174.03906,134.09767 173.71875,133.44141 C 173.39844,132.77735 173.23828,131.99611 173.23828,131.09766 C 173.23828,129.41798 173.80859,128.13283 174.94922,127.24219 C 176.08984,126.34377 177.73828,125.89455 179.89453,125.89453 C 181.91015,125.89455 183.48436,126.37111 184.61719,127.32422 C 185.7578,128.27736 186.35936,129.62111 186.42188,131.35547 L 183.01172,131.35547 C 182.94921,130.51954 182.6289,129.88283 182.05078,129.44531 C 181.47265,129.00783 180.64843,128.78908 179.57813,128.78906 C 178.64843,128.78908 177.92968,128.97267 177.42188,129.33984 C 176.92187,129.69923 176.67187,130.21486 176.67188,130.88672 C 176.67187,131.80079 177.65234,132.48439 179.61328,132.9375 C 180.14452,133.06251 180.55859,133.16017 180.85547,133.23047 C 182.11327,133.55079 183.0039,133.80079 183.52734,133.98047 C 184.05858,134.16017 184.51952,134.35938 184.91016,134.57813 C 185.61327,134.96876 186.14061,135.48829 186.49219,136.13672 C 186.84374,136.77735 187.01952,137.54688 187.01953,138.44531 C 187.01952,140.24219 186.41405,141.63672 185.20313,142.62891 C 183.99218,143.61328 182.28515,144.10547 180.08203,144.10547 C 177.91015,144.10547 176.20703,143.60156 174.97266,142.59375 C 173.73828,141.58594 173.07422,140.15235 172.98047,138.29297"
+       id="text5645" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 236.16211,140.51367 L 239.00977,140.51367 C 240.65819,140.51367 241.8496,140.08399 242.58398,139.22461 C 243.32616,138.35743 243.69725,136.95508 243.69727,135.01758 C 243.69725,133.0879 243.3535,131.66993 242.66602,130.76367 C 241.9785,129.85744 240.90429,129.40431 239.44336,129.4043 L 236.16211,129.4043 L 236.16211,140.51367 M 232.68164,143.63086 L 232.68164,126.36914 L 239.44336,126.36914 C 242.09179,126.36916 244.06444,127.084 245.36133,128.51367 C 246.666,129.94337 247.31834,132.11134 247.31836,135.01758 C 247.31834,136.59571 247.07616,137.98633 246.5918,139.18945 C 246.11522,140.39258 245.41991,141.36133 244.50586,142.0957 C 243.81835,142.64258 243.0371,143.03711 242.16211,143.2793 C 241.2871,143.51367 240.06054,143.63086 238.48242,143.63086 L 232.68164,143.63086"
+       id="text5649" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 293.97656,143.63086 L 293.97656,126.36914 L 306.02344,126.36914 L 306.02344,129.36914 L 297.48047,129.36914 L 297.48047,133.2832 L 304.96875,133.2832 L 304.96875,136.2832 L 297.48047,136.2832 L 297.48047,143.63086 L 293.97656,143.63086"
+       id="text5653" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 365.17969,141.57422 C 364.53905,142.44141 363.80858,143.07813 362.98828,143.48438 C 362.17577,143.89062 361.21874,144.09375 360.11719,144.09375 C 357.70312,144.09375 355.74609,143.25781 354.24609,141.58594 C 352.7539,139.90625 352.00781,137.70313 352.00781,134.97656 C 352.00781,132.22657 352.7539,130.02736 354.24609,128.37891 C 355.73828,126.73049 357.72656,125.90627 360.21094,125.90625 C 362.37499,125.90627 364.14061,126.4258 365.50781,127.46484 C 366.87498,128.49611 367.68748,129.91798 367.94531,131.73047 L 364.32422,131.73047 C 364.10546,130.83204 363.65624,130.14845 362.97656,129.67969 C 362.30468,129.21095 361.42577,128.97658 360.33984,128.97656 C 358.89452,128.97658 357.75781,129.50783 356.92969,130.57031 C 356.10937,131.62501 355.69921,133.08595 355.69922,134.95313 C 355.69921,136.82813 356.1289,138.29688 356.98828,139.35938 C 357.84765,140.42188 359.02734,140.95313 360.52734,140.95313 C 361.65233,140.95313 362.59374,140.6211 363.35156,139.95703 C 364.10936,139.29297 364.57811,138.38282 364.75781,137.22656 L 360.84375,137.22656 L 360.84375,134.27344 L 367.99219,134.27344 L 367.99219,143.61328 L 365.61328,143.61328 L 365.17969,141.57422"
+       id="text5657" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 412.86328,143.63086 L 412.86328,126.36914 L 416.4375,126.36914 L 416.4375,132.80273 L 423.5625,132.80273 L 423.5625,126.36914 L 427.13672,126.36914 L 427.13672,143.63086 L 423.5625,143.63086 L 423.5625,135.97852 L 416.4375,135.97852 L 416.4375,143.63086 L 412.86328,143.63086"
+       id="text5661" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 474.48047,136.95703 L 477.91406,136.95703 L 477.91406,139.04297 C 477.91406,139.64453 478.09375,140.10547 478.45313,140.42578 C 478.8125,140.73828 479.32812,140.89453 480,140.89453 C 480.73437,140.89453 481.24609,140.70313 481.53516,140.32031 C 481.82421,139.9375 481.96874,139.21875 481.96875,138.16406 L 481.96875,126.12891 L 485.51953,126.12891 L 485.51953,138.32813 C 485.51952,139.42188 485.45311,140.22657 485.32031,140.74219 C 485.1953,141.25 484.98436,141.69922 484.6875,142.08984 C 484.23436,142.66797 483.61327,143.10938 482.82422,143.41406 C 482.03515,143.71875 481.10937,143.87109 480.04688,143.87109 C 479.07031,143.87109 478.20703,143.73828 477.45703,143.47266 C 476.70703,143.20703 476.08203,142.8125 475.58203,142.28906 C 475.18359,141.86719 474.89844,141.39844 474.72656,140.88281 C 474.5625,140.35938 474.48047,139.5 474.48047,138.30469 L 474.48047,136.95703"
+       id="text5665" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 532.32422,143.63086 L 532.32422,126.36914 L 535.875,126.36914 L 535.875,133.45898 L 542.61328,126.36914 L 547.05469,126.36914 L 540.16406,133.35352 L 547.67578,143.63086 L 543.33984,143.63086 L 537.71484,135.73242 L 535.875,137.56055 L 535.875,143.63086 L 532.32422,143.63086"
+       id="text5669" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 594.01172,143.63086 L 594.01172,126.36914 L 597.5625,126.36914 L 597.5625,140.44336 L 605.98828,140.44336 L 605.98828,143.63086 L 594.01172,143.63086"
+       id="text5673" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 143.15039,203.63086 L 143.15039,200.63086 L 152.53711,189.49805 L 143.33789,189.49805 L 143.33789,186.36914 L 156.84961,186.36914 L 156.84961,189.36914 L 147.43945,200.51367 L 156.63867,200.51367 L 156.63867,203.63086 L 143.15039,203.63086"
+       id="text5679" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 202.37109,203.63086 L 207.79688,194.81836 L 202.37109,186.36914 L 206.47266,186.36914 L 210,192.4043 L 213.50391,186.36914 L 217.62891,186.36914 L 212.20313,194.79492 L 217.62891,203.63086 L 213.52734,203.63086 L 210,197.6543 L 206.47266,203.63086 L 202.37109,203.63086"
+       id="text5683" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 277.875,197.68359 C 277.74217,199.64454 276.98436,201.20313 275.60156,202.35938 C 274.22655,203.51563 272.42968,204.09375 270.21094,204.09375 C 267.65624,204.09375 265.66796,203.29688 264.24609,201.70313 C 262.83203,200.10938 262.125,197.87501 262.125,195 C 262.125,192.06251 262.84765,189.81251 264.29297,188.25 C 265.73828,186.68752 267.8164,185.90627 270.52734,185.90625 C 272.73046,185.90627 274.46874,186.44533 275.74219,187.52344 C 277.02342,188.59377 277.72655,190.10939 277.85156,192.07031 L 274.34766,192.07031 C 274.19921,191.09376 273.80077,190.35158 273.15234,189.84375 C 272.50389,189.32814 271.6289,189.07033 270.52734,189.07031 C 268.96484,189.07033 267.77734,189.57423 266.96484,190.58203 C 266.15234,191.58986 265.74609,193.06251 265.74609,195 C 265.74609,196.87501 266.14843,198.32422 266.95313,199.34766 C 267.76562,200.3711 268.91796,200.88282 270.41016,200.88281 C 271.48827,200.88282 272.37108,200.60938 273.05859,200.0625 C 273.74608,199.50782 274.19139,198.71485 274.39453,197.68359 L 277.875,197.68359"
+       id="text5687" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 328.33594,203.63086 L 322.38281,186.36914 L 326.32031,186.36914 L 329.98828,199.2832 L 333.72656,186.36914 L 337.61719,186.36914 L 331.73438,203.63086 L 328.33594,203.63086"
+       id="text5691" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 386.32031,200.51367 L 390.52734,200.51367 C 391.51952,200.51367 392.24218,200.33399 392.69531,199.97461 C 393.14843,199.61524 393.37499,199.04883 393.375,198.27539 C 393.37499,197.47071 393.15233,196.89258 392.70703,196.54102 C 392.26171,196.18165 391.52733,196.00196 390.50391,196.00195 L 386.32031,196.00195 L 386.32031,200.51367 M 386.32031,193.04883 L 390.375,193.04883 C 391.24999,193.04884 391.89061,192.9004 392.29688,192.60352 C 392.70311,192.29884 392.90624,191.82228 392.90625,191.17383 C 392.90624,190.54103 392.70702,190.084 392.30859,189.80273 C 391.91796,189.51369 391.26561,189.36915 390.35156,189.36914 L 386.32031,189.36914 L 386.32031,193.04883 M 382.92188,203.63086 L 382.92188,186.36914 L 391.05469,186.36914 C 392.8203,186.36916 394.16405,186.74416 395.08594,187.49414 C 396.01561,188.23634 396.48045,189.31837 396.48047,190.74023 C 396.48045,191.61525 396.30858,192.34571 395.96484,192.93164 C 395.62108,193.51759 395.10545,193.97071 394.41797,194.29102 C 395.30858,194.6504 395.97264,195.16993 396.41016,195.84961 C 396.85545,196.52149 397.07811,197.36133 397.07813,198.36914 C 397.07811,200.04883 396.53123,201.34571 395.4375,202.25977 C 394.34374,203.17383 392.79296,203.63086 390.78516,203.63086 L 382.92188,203.63086"
+       id="text5695" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 442.88672,203.63086 L 442.88672,186.36914 L 446.60156,186.36914 L 453.60938,198.22852 L 453.60938,186.36914 L 457.11328,186.36914 L 457.11328,203.63086 L 453.44531,203.63086 L 446.39063,191.77148 L 446.39063,203.63086 L 442.88672,203.63086"
+       id="text5699" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 501.32813,203.63086 L 501.32813,186.36914 L 506.57813,186.36914 L 510.01172,199.50586 L 513.39844,186.36914 L 518.67188,186.36914 L 518.67188,203.63086 L 515.34375,203.63086 L 515.34375,189.70898 L 511.83984,203.63086 L 508.20703,203.63086 L 504.65625,189.70898 L 504.65625,203.63086 L 501.32813,203.63086"
+       id="text5703" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 658.22461,134.6543 L 658.22461,131.10352 L 661.77539,131.10352 L 661.77539,134.6543 L 658.22461,134.6543 M 658.22461,143.63086 L 658.22461,140.10352 L 661.77539,140.10352 L 661.77539,143.63086 L 658.22461,143.63086 M 658.24805,164.6543 L 658.24805,161.10352 L 661.77539,161.10352 L 661.77539,164.6543 L 658.24805,164.6543 M 658.24805,177.68555 L 658.24805,176.31445 C 658.90429,176.12695 659.38867,175.83789 659.70117,175.44727 C 660.01367,175.05664 660.16992,174.54883 660.16992,173.92383 L 660.16992,173.63086 L 658.22461,173.63086 L 658.22461,170.10352 L 661.77539,170.10352 L 661.77539,173.49023 C 661.77539,174.66211 661.47851,175.59961 660.88477,176.30273 C 660.29101,177.01367 659.41211,177.47461 658.24805,177.68555"
+       id="text5725" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 720.78516,126.7793 L 723.03516,126.7793 L 723.03516,133.33008 L 720.78516,133.33008 L 720.78516,126.7793 M 716.96484,126.7793 L 719.21484,126.7793 L 719.21484,133.33008 L 716.96484,133.33008 L 716.96484,126.7793 M 718.88672,156.7793 L 721.13672,156.7793 L 721.13672,163.33008 L 718.88672,163.33008 L 718.88672,156.7793"
+       id="text5731" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 772.5,140.60938 L 772.5,129.10156 L 780.85156,129.10156 L 780.85156,131.10156 L 774.83594,131.10156 L 774.83594,133.55469 L 780.33594,133.55469 L 780.33594,135.52344 L 774.83594,135.52344 L 774.83594,138.48438 L 781.13281,138.48438 L 781.13281,140.60938 L 772.5,140.60938 M 782.74219,140.60938 L 782.74219,132.11719 L 784.96875,132.11719 L 784.96875,133.125 C 785.28645,132.71355 785.66145,132.40626 786.09375,132.20313 C 786.52604,131.9948 787.00781,131.89063 787.53906,131.89063 C 788.47656,131.89063 789.17708,132.13543 789.64063,132.625 C 790.10937,133.10938 790.34374,133.84115 790.34375,134.82031 L 790.34375,140.60938 L 788.07031,140.60938 L 788.07031,135.47656 C 788.07031,134.86719 787.96614,134.4323 787.75781,134.17188 C 787.55468,133.91147 787.22135,133.78126 786.75781,133.78125 C 786.22135,133.78126 785.79687,133.94271 785.48438,134.26563 C 785.17187,134.58334 785.01562,135.01823 785.01563,135.57031 L 785.01563,140.60938 L 782.74219,140.60938 M 796.07813,140.67188 C 795.86979,140.67708 795.61979,140.6849 795.32813,140.69531 C 795.04166,140.71094 794.85937,140.71875 794.78125,140.71875 C 793.91146,140.71875 793.3151,140.55729 792.99219,140.23438 C 792.67448,139.90625 792.51562,139.26302 792.51563,138.30469 L 792.51563,133.71094 L 791.39063,133.71094 L 791.39063,132.11719 L 792.51563,132.11719 L 792.51563,129.79688 L 794.76563,129.79688 L 794.76563,132.11719 L 796.07813,132.11719 L 796.07813,133.71094 L 794.76563,133.71094 L 794.76563,138.41406 C 794.76562,138.63802 794.8151,138.78646 794.91406,138.85938 C 795.01302,138.92709 795.21614,138.96094 795.52344,138.96094 L 796.07813,138.96094 L 796.07813,140.67188 M 802.63281,138.03125 L 804.89844,138.03125 C 804.66926,138.92709 804.20572,139.63021 803.50781,140.14063 C 802.8151,140.64583 801.96874,140.89844 800.96875,140.89844 C 799.73958,140.89844 798.76562,140.48698 798.04688,139.66406 C 797.32812,138.83594 796.96875,137.71615 796.96875,136.30469 C 796.96875,134.91407 797.32292,133.81772 798.03125,133.01563 C 798.73958,132.21355 799.70833,131.81251 800.9375,131.8125 C 802.23958,131.81251 803.24478,132.20834 803.95313,133 C 804.66145,133.78647 805.01562,134.90886 805.01563,136.36719 C 805.01562,136.52865 805.01301,136.65105 805.00781,136.73438 C 805.0078,136.8125 805.0026,136.88802 804.99219,136.96094 L 799.32031,136.96094 C 799.35156,137.62761 799.51302,138.13021 799.80469,138.46875 C 800.10156,138.80729 800.52604,138.97656 801.07813,138.97656 C 801.46874,138.97656 801.78906,138.90104 802.03906,138.75 C 802.28906,138.59375 802.48697,138.35417 802.63281,138.03125 M 799.32031,135.46875 L 802.66406,135.46875 C 802.64322,134.89584 802.48958,134.46094 802.20313,134.16406 C 801.92187,133.86199 801.51562,133.71094 800.98438,133.71094 C 800.48958,133.71094 800.09895,133.86199 799.8125,134.16406 C 799.53125,134.46615 799.36718,134.90105 799.32031,135.46875 M 806.52344,140.60938 L 806.52344,132.11719 L 808.63281,132.11719 L 808.63281,133.57031 C 808.92968,132.98699 809.27604,132.5599 809.67188,132.28906 C 810.0677,132.01303 810.53906,131.87501 811.08594,131.875 C 811.17447,131.87501 811.24218,131.87761 811.28906,131.88281 C 811.34114,131.88282 811.38281,131.88543 811.41406,131.89063 L 811.42188,134.19531 L 810.66406,134.19531 C 810.04427,134.19532 809.57812,134.35678 809.26563,134.67969 C 808.95312,135.00261 808.79687,135.48178 808.79688,136.11719 L 808.79688,140.60938 L 806.52344,140.60938"
+       id="text5737" />
+    <path
+       style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 787.5,172.5 L 787.5,157.5 L 772.5,165 L 787.5,172.5 z "
+       id="path5745" />
+    <path
+       style="fill:none;fill-opacity:0.75;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1"
+       d="M 810,150 L 810,165 L 780,165"
+       id="path5747" />
+    <g
+       id="g3601">
+      <path
+         id="text5753"
+         d="M 12.496094,197.64063 L 14.832032,197.64063 C 14.92057,198.27084 15.178382,198.73828 15.605469,199.04297 C 16.032548,199.34766 16.649735,199.5 17.457032,199.5 C 18.144525,199.5 18.662754,199.37761 19.011719,199.13281 C 19.36067,198.88802 19.535149,198.52604 19.535157,198.04688 C 19.535149,197.34896 18.532546,196.77084 16.527344,196.3125 C 16.501298,196.3073 16.47786,196.30209 16.457032,196.29688 C 16.404944,196.28646 16.324215,196.26823 16.214844,196.24219 C 15.141924,196.00782 14.3763,195.7448 13.917969,195.45313 C 13.511717,195.19271 13.201822,194.84245 12.988282,194.40234 C 12.774739,193.96225 12.667968,193.44272 12.667969,192.84375 C 12.667968,191.72397 13.048176,190.8659 13.808594,190.26953 C 14.569008,189.67319 15.667965,189.37501 17.105469,189.375 C 18.449212,189.37501 19.499993,189.69272 20.257813,190.32813 C 21.015616,190.96355 21.415355,191.85938 21.457032,193.01563 L 19.183594,193.01563 C 19.14192,192.45834 18.928379,192.03386 18.542969,191.74219 C 18.157546,191.45053 17.608067,191.3047 16.894532,191.30469 C 16.274735,191.3047 15.796871,191.42579 15.460938,191.66797 C 15.124997,191.91017 14.957028,192.25522 14.957032,192.70313 C 14.957028,193.31251 15.610674,193.76824 16.917969,194.07031 C 17.27213,194.15365 17.548172,194.21876 17.746094,194.26563 C 18.584629,194.47917 19.17968,194.64584 19.53125,194.76563 C 19.882805,194.88542 20.188794,195.01824 20.449219,195.16406 C 20.91796,195.42448 21.269522,195.76954 21.503907,196.19922 C 21.738272,196.62891 21.855459,197.14323 21.855469,197.74219 C 21.855459,198.94011 21.451814,199.86849 20.644532,200.52734 C 19.837232,201.1862 18.699212,201.51562 17.230469,201.51563 C 15.782548,201.51562 14.647133,201.17969 13.824219,200.50781 C 13.001301,199.83594 12.558593,198.88021 12.496094,197.64063 L 12.496094,197.64063 z M 23.566407,201.19531 L 23.566407,189.6875 L 25.824219,189.6875 L 25.824219,193.64063 C 26.131507,193.25522 26.497392,192.96485 26.921875,192.76953 C 27.34635,192.57423 27.82161,192.47657 28.347657,192.47656 C 28.84765,192.47657 29.299473,192.56251 29.703125,192.73438 C 30.106764,192.90626 30.433586,193.15105 30.683594,193.46875 C 30.855461,193.6823 30.976554,193.92709 31.046875,194.20313 C 31.117179,194.47917 31.152335,194.92188 31.152344,195.53125 L 31.152344,195.6875 L 31.152344,201.19531 L 28.894532,201.19531 L 28.894532,196.75 C 28.894525,195.69792 28.798171,195.03777 28.605469,194.76953 C 28.412755,194.50131 28.066401,194.36719 27.566407,194.36719 C 27.029944,194.36719 26.605465,194.52735 26.292969,194.84766 C 25.980466,195.16797 25.824216,195.60417 25.824219,196.15625 L 25.824219,201.19531 L 23.566407,201.19531 z M 33.191407,191.75781 L 33.191407,189.6875 L 35.464844,189.6875 L 35.464844,191.75781 L 33.191407,191.75781 z M 33.191407,201.19531 L 33.191407,192.70313 L 35.464844,192.70313 L 35.464844,201.19531 L 33.191407,201.19531 z M 37.886719,201.19531 L 37.886719,194.29688 L 36.675782,194.29688 L 36.675782,192.70313 L 37.886719,192.70313 L 37.886719,191.91406 C 37.886718,191.12241 38.091144,190.54038 38.5,190.16797 C 38.908852,189.79558 39.553383,189.60939 40.433594,189.60938 C 40.595048,189.60939 40.765621,189.61329 40.945313,189.62109 C 41.124996,189.62892 41.316402,189.64324 41.519532,189.66406 L 41.519532,191.46875 L 40.925782,191.46875 C 40.587236,191.46876 40.36458,191.51303 40.257813,191.60156 C 40.151038,191.69011 40.097653,191.85938 40.097657,192.10938 L 40.097657,192.70313 L 41.519532,192.70313 L 41.519532,194.29688 L 40.113282,194.29688 L 40.113282,201.19531 L 37.886719,201.19531 z M 46.449219,201.25781 C 46.240881,201.26302 45.992183,201.27214 45.703125,201.28516 C 45.414059,201.29818 45.230465,201.30469 45.152344,201.30469 C 44.28255,201.30469 43.687498,201.14193 43.367188,200.81641 C 43.046874,200.49089 42.886718,199.84896 42.886719,198.89063 L 42.886719,194.29688 L 41.761719,194.29688 L 41.761719,192.70313 L 42.886719,192.70313 L 42.886719,190.38281 L 45.136719,190.38281 L 45.136719,192.70313 L 46.449219,192.70313 L 46.449219,194.29688 L 45.136719,194.29688 L 45.136719,199 C 45.136716,199.22396 45.186195,199.3711 45.285157,199.44141 C 45.384111,199.51172 45.587236,199.54688 45.894532,199.54688 L 46.449219,199.54688 L 46.449219,201.25781 z "
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT" />
+      <path
+         style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+         d="M 24.746094,207.125 L 13.496094,222.125 L 20.996094,222.125 L 20.996094,229.625 L 28.496094,229.625 L 28.496094,222.125 L 35.996094,222.125 L 24.746094,207.125 z "
+         id="path5757" />
+    </g>
+    <g
+       id="g5795"
+       transform="translate(727.5,0)">
+      <text
+         sodipodi:linespacing="125%"
+         id="text5797"
+         y="201.19531"
+         x="31.8125"
+         style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+         xml:space="preserve"><tspan
+           y="201.19531"
+           x="31.8125"
+           id="tspan5799"
+           sodipodi:role="line">Shift</tspan></text>
+      <path
+         id="path5801"
+         d="M 27.25,207.125 L 16,222.125 L 23.5,222.125 L 23.5,229.625 L 31,229.625 L 31,222.125 L 38.5,222.125 L 27.25,207.125 z "
+         style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+    </g>
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 576.90234,189.63867 L 576.90234,192.20508 L 566.4375,196.48242 L 576.90234,200.74805 L 576.90234,203.31445 L 563.09766,197.63086 L 563.09766,195.29883 L 576.90234,189.63867 M 568.21875,237.68555 L 568.21875,236.31445 C 568.875,236.12695 569.35937,235.83789 569.67188,235.44727 C 569.98437,235.05664 570.14062,234.54883 570.14063,233.92383 L 570.14063,233.63086 L 568.21875,233.63086 L 568.21875,230.10352 L 571.76953,230.10352 L 571.76953,233.49023 C 571.76953,234.6543 571.46875,235.59179 570.86719,236.30273 C 570.27343,237.01367 569.39062,237.47461 568.21875,237.68555"
+       id="text5803" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 623.09766,189.63867 L 636.90234,195.29883 L 636.90234,197.63086 L 623.09766,203.31445 L 623.09766,200.74805 L 633.58594,196.48242 L 623.09766,192.20508 L 623.09766,189.63867 M 628.21875,233.63086 L 628.21875,230.10352 L 631.74609,230.10352 L 631.74609,233.63086 L 628.21875,233.63086"
+       id="text5813" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 688.44727,198.61523 C 688.44726,198.5293 688.44335,198.41602 688.43555,198.27539 C 688.42773,198.12696 688.42382,198.01758 688.42383,197.94727 C 688.42382,197.25977 688.49804,196.68946 688.64648,196.23633 C 688.79492,195.7754 689.0332,195.34571 689.36133,194.94727 C 689.61132,194.6504 689.98242,194.31056 690.47461,193.92773 C 690.9746,193.54493 691.29882,193.26759 691.44727,193.0957 C 691.75976,192.74415 691.9746,192.42775 692.0918,192.14648 C 692.20898,191.86525 692.26757,191.55665 692.26758,191.2207 C 692.26757,190.47853 692.06054,189.9004 691.64648,189.48633 C 691.23241,189.07228 690.65429,188.86525 689.91211,188.86523 C 689.16992,188.86525 688.58398,189.11525 688.1543,189.61523 C 687.73242,190.10744 687.50195,190.80275 687.46289,191.70117 L 684.1582,191.70117 L 684.1582,191.33789 C 684.1582,189.68947 684.67773,188.37697 685.7168,187.40039 C 686.76367,186.41603 688.16992,185.92385 689.93555,185.92383 C 691.74023,185.92385 693.17382,186.38869 694.23633,187.31836 C 695.30663,188.24025 695.84178,189.47853 695.8418,191.0332 C 695.84178,191.58009 695.77928,192.07228 695.6543,192.50977 C 695.5371,192.93946 695.3535,193.33399 695.10352,193.69336 C 694.78319,194.14649 694.2871,194.63868 693.61523,195.16992 C 692.95116,195.69337 692.54882,196.01759 692.4082,196.14258 C 692.11132,196.43165 691.89648,196.73634 691.76367,197.05664 C 691.63866,197.37696 691.57616,197.75977 691.57617,198.20508 C 691.57616,198.24415 691.58007,198.31055 691.58789,198.4043 C 691.59569,198.49805 691.5996,198.56836 691.59961,198.61523 L 688.44727,198.61523 M 688.2832,203.63086 L 688.2832,200.19727 L 691.74023,200.19727 L 691.74023,203.63086 L 688.2832,203.63086 M 686.31445,235.85742 L 692.12695,215.92383 L 693.73242,215.92383 L 687.89648,235.85742 L 686.31445,235.85742"
+       id="text5819" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 18,271.78906 C 17.911447,273.09636 17.406239,274.13542 16.484375,274.90625 C 15.5677,275.67708 14.369784,276.0625 12.890625,276.0625 C 11.187496,276.0625 9.8619761,275.53125 8.9140625,274.46875 C 7.971353,273.40625 7.4999993,271.91667 7.5,270 C 7.4999993,268.04167 7.9817696,266.54168 8.9453125,265.5 C 9.9088511,264.45834 11.294266,263.93751 13.101563,263.9375 C 14.570305,263.93751 15.729158,264.29689 16.578125,265.01563 C 17.432281,265.72918 17.901031,266.73959 17.984375,268.04688 L 15.648438,268.04688 C 15.54947,267.39584 15.283846,266.90105 14.851563,266.5625 C 14.419263,266.21876 13.83593,266.04688 13.101563,266.04688 C 12.059891,266.04688 11.268225,266.38282 10.726563,267.05469 C 10.184892,267.72657 9.9140594,268.70834 9.9140625,270 C 9.9140594,271.25 10.182288,272.21615 10.71875,272.89844 C 11.260412,273.58073 12.028641,273.92188 13.023438,273.92188 C 13.742181,273.92188 14.330722,273.73959 14.789063,273.375 C 15.247387,273.00521 15.544262,272.47657 15.679688,271.78906 L 18,271.78906 M 23.46875,275.80469 C 23.260412,275.8099 23.010412,275.81771 22.71875,275.82813 C 22.432288,275.84375 22.249996,275.85156 22.171875,275.85156 C 21.302081,275.85156 20.705727,275.6901 20.382813,275.36719 C 20.065103,275.03906 19.906249,274.39583 19.90625,273.4375 L 19.90625,268.84375 L 18.78125,268.84375 L 18.78125,267.25 L 19.90625,267.25 L 19.90625,264.92969 L 22.15625,264.92969 L 22.15625,267.25 L 23.46875,267.25 L 23.46875,268.84375 L 22.15625,268.84375 L 22.15625,273.54688 C 22.156247,273.77084 22.205726,273.91927 22.304688,273.99219 C 22.403642,274.0599 22.606767,274.09375 22.914063,274.09375 L 23.46875,274.09375 L 23.46875,275.80469 M 24.789063,275.74219 L 24.789063,267.25 L 26.898438,267.25 L 26.898438,268.70313 C 27.195309,268.1198 27.541663,267.69272 27.9375,267.42188 C 28.333329,267.14584 28.804682,267.00782 29.351563,267.00781 C 29.440099,267.00782 29.507807,267.01043 29.554688,267.01563 C 29.606765,267.01563 29.648432,267.01824 29.679688,267.02344 L 29.6875,269.32813 L 28.929688,269.32813 C 28.309891,269.32813 27.843746,269.48959 27.53125,269.8125 C 27.218747,270.13542 27.062497,270.61459 27.0625,271.25 L 27.0625,275.74219 L 24.789063,275.74219 M 31.023438,275.74219 L 31.023438,264.23438 L 33.296875,264.23438 L 33.296875,275.74219 L 31.023438,275.74219"
+       id="text5827" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 162.96875,266.49609 L 161.375,271.39453 L 164.57031,271.39453 L 162.96875,266.49609 M 161.59375,264.19141 L 164.32813,264.19141 L 168.47656,275.69922 L 165.99219,275.69922 L 165.21094,273.33203 L 160.75,273.33203 L 159.99219,275.69922 L 157.5,275.69922 L 161.59375,264.19141 M 169.53906,275.69922 L 169.53906,264.19141 L 171.8125,264.19141 L 171.8125,275.69922 L 169.53906,275.69922 M 177.64063,275.76172 C 177.43229,275.76693 177.18229,275.77474 176.89063,275.78516 C 176.60416,275.80078 176.42187,275.80859 176.34375,275.80859 C 175.47396,275.80859 174.8776,275.64714 174.55469,275.32422 C 174.23698,274.99609 174.07812,274.35287 174.07813,273.39453 L 174.07813,268.80078 L 172.95313,268.80078 L 172.95313,267.20703 L 174.07813,267.20703 L 174.07813,264.88672 L 176.32813,264.88672 L 176.32813,267.20703 L 177.64063,267.20703 L 177.64063,268.80078 L 176.32813,268.80078 L 176.32813,273.50391 C 176.32812,273.72787 176.3776,273.8763 176.47656,273.94922 C 176.57552,274.01693 176.77864,274.05078 177.08594,274.05078 L 177.64063,274.05078 L 177.64063,275.76172"
+       id="text5831" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 612.96875,266.53906 L 611.375,271.4375 L 614.57031,271.4375 L 612.96875,266.53906 M 611.59375,264.23438 L 614.32813,264.23438 L 618.47656,275.74219 L 615.99219,275.74219 L 615.21094,273.375 L 610.75,273.375 L 609.99219,275.74219 L 607.5,275.74219 L 611.59375,264.23438 M 619.53906,275.74219 L 619.53906,264.23438 L 621.8125,264.23438 L 621.8125,275.74219 L 619.53906,275.74219 M 627.64063,275.80469 C 627.43229,275.8099 627.18229,275.81771 626.89063,275.82813 C 626.60416,275.84375 626.42187,275.85156 626.34375,275.85156 C 625.47396,275.85156 624.8776,275.6901 624.55469,275.36719 C 624.23698,275.03906 624.07812,274.39583 624.07813,273.4375 L 624.07813,268.84375 L 622.95313,268.84375 L 622.95313,267.25 L 624.07813,267.25 L 624.07813,264.92969 L 626.32813,264.92969 L 626.32813,267.25 L 627.64063,267.25 L 627.64063,268.84375 L 626.32813,268.84375 L 626.32813,273.54688 C 626.32812,273.77084 626.3776,273.91927 626.47656,273.99219 C 626.57552,274.0599 626.77864,274.09375 627.08594,274.09375 L 627.64063,274.09375 L 627.64063,275.80469 M 642,274.38281 C 641.57291,274.96094 641.08593,275.38542 640.53906,275.65625 C 639.99739,275.92708 639.35937,276.0625 638.625,276.0625 C 637.01562,276.0625 635.71093,275.50521 634.71094,274.39063 C 633.71614,273.27084 633.21875,271.80209 633.21875,269.98438 C 633.21875,268.15105 633.71614,266.6849 634.71094,265.58594 C 635.70573,264.48699 637.03125,263.93751 638.6875,263.9375 C 640.1302,263.93751 641.30728,264.28387 642.21875,264.97656 C 643.1302,265.66407 643.67186,266.61199 643.84375,267.82031 L 641.42969,267.82031 C 641.28385,267.22136 640.98437,266.76563 640.53125,266.45313 C 640.08333,266.14063 639.49739,265.98438 638.77344,265.98438 C 637.80989,265.98438 637.05208,266.33855 636.5,267.04688 C 635.95312,267.75001 635.67968,268.72397 635.67969,269.96875 C 635.67968,271.21875 635.96614,272.19792 636.53906,272.90625 C 637.11197,273.61459 637.89843,273.96875 638.89844,273.96875 C 639.64843,273.96875 640.27603,273.7474 640.78125,273.30469 C 641.28645,272.86198 641.59895,272.25521 641.71875,271.48438 L 639.10938,271.48438 L 639.10938,269.51563 L 643.875,269.51563 L 643.875,275.74219 L 642.28906,275.74219 L 642,274.38281 M 645.96094,275.74219 L 645.96094,267.25 L 648.07031,267.25 L 648.07031,268.70313 C 648.36718,268.1198 648.71354,267.69272 649.10938,267.42188 C 649.5052,267.14584 649.97656,267.00782 650.52344,267.00781 C 650.61197,267.00782 650.67968,267.01043 650.72656,267.01563 C 650.77864,267.01563 650.82031,267.01824 650.85156,267.02344 L 650.85938,269.32813 L 650.10156,269.32813 C 649.48177,269.32813 649.01562,269.48959 648.70313,269.8125 C 648.39062,270.13542 648.23437,270.61459 648.23438,271.25 L 648.23438,275.74219 L 645.96094,275.74219"
+       id="text5835" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 828,271.78906 C 827.91145,273.09636 827.40624,274.13542 826.48438,274.90625 C 825.5677,275.67708 824.36978,276.0625 822.89063,276.0625 C 821.1875,276.0625 819.86198,275.53125 818.91406,274.46875 C 817.97135,273.40625 817.5,271.91667 817.5,270 C 817.5,268.04167 817.98177,266.54168 818.94531,265.5 C 819.90885,264.45834 821.29427,263.93751 823.10156,263.9375 C 824.5703,263.93751 825.72916,264.29689 826.57813,265.01563 C 827.43228,265.72918 827.90103,266.73959 827.98438,268.04688 L 825.64844,268.04688 C 825.54947,267.39584 825.28385,266.90105 824.85156,266.5625 C 824.41926,266.21876 823.83593,266.04688 823.10156,266.04688 C 822.05989,266.04688 821.26822,266.38282 820.72656,267.05469 C 820.18489,267.72657 819.91406,268.70834 819.91406,270 C 819.91406,271.25 820.18229,272.21615 820.71875,272.89844 C 821.26041,273.58073 822.02864,273.92188 823.02344,273.92188 C 823.74218,273.92188 824.33072,273.73959 824.78906,273.375 C 825.24739,273.00521 825.54426,272.47657 825.67969,271.78906 L 828,271.78906 M 833.46875,275.80469 C 833.26041,275.8099 833.01041,275.81771 832.71875,275.82813 C 832.43229,275.84375 832.25,275.85156 832.17188,275.85156 C 831.30208,275.85156 830.70573,275.6901 830.38281,275.36719 C 830.0651,275.03906 829.90625,274.39583 829.90625,273.4375 L 829.90625,268.84375 L 828.78125,268.84375 L 828.78125,267.25 L 829.90625,267.25 L 829.90625,264.92969 L 832.15625,264.92969 L 832.15625,267.25 L 833.46875,267.25 L 833.46875,268.84375 L 832.15625,268.84375 L 832.15625,273.54688 C 832.15625,273.77084 832.20573,273.91927 832.30469,273.99219 C 832.40364,274.0599 832.60677,274.09375 832.91406,274.09375 L 833.46875,274.09375 L 833.46875,275.80469 M 834.78906,275.74219 L 834.78906,267.25 L 836.89844,267.25 L 836.89844,268.70313 C 837.19531,268.1198 837.54166,267.69272 837.9375,267.42188 C 838.33333,267.14584 838.80468,267.00782 839.35156,267.00781 C 839.4401,267.00782 839.50781,267.01043 839.55469,267.01563 C 839.60677,267.01563 839.64843,267.01824 839.67969,267.02344 L 839.6875,269.32813 L 838.92969,269.32813 C 838.30989,269.32813 837.84375,269.48959 837.53125,269.8125 C 837.21875,270.13542 837.0625,270.61459 837.0625,271.25 L 837.0625,275.74219 L 834.78906,275.74219 M 841.02344,275.74219 L 841.02344,264.23438 L 843.29688,264.23438 L 843.29688,275.74219 L 841.02344,275.74219"
+       id="text5839" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 108.94531,264.01953 L 105.64844,252.51172 L 108.10156,252.51172 L 110.07031,260.62891 L 111.73438,252.51172 L 114.25781,252.51172 L 115.92188,260.62891 L 117.89063,252.51172 L 120.32031,252.51172 L 117.03125,264.01953 L 114.77344,264.01953 L 112.99219,255.20703 L 111.20313,264.01953 L 108.94531,264.01953 M 121.5,254.58203 L 121.5,252.51172 L 123.77344,252.51172 L 123.77344,254.58203 L 121.5,254.58203 M 121.5,264.01953 L 121.5,255.52734 L 123.77344,255.52734 L 123.77344,264.01953 L 121.5,264.01953 M 125.79688,264.01953 L 125.79688,255.52734 L 128.02344,255.52734 L 128.02344,256.53516 C 128.34114,256.12371 128.71614,255.81641 129.14844,255.61328 C 129.58072,255.40496 130.06249,255.30079 130.59375,255.30078 C 131.53124,255.30079 132.23176,255.54558 132.69531,256.03516 C 133.16405,256.51954 133.39843,257.25131 133.39844,258.23047 L 133.39844,264.01953 L 131.125,264.01953 L 131.125,258.88672 C 131.12499,258.27735 131.02083,257.84245 130.8125,257.58203 C 130.60937,257.32162 130.27604,257.19141 129.8125,257.19141 C 129.27604,257.19141 128.85156,257.35287 128.53906,257.67578 C 128.22656,257.9935 128.07031,258.42839 128.07031,258.98047 L 128.07031,264.01953 L 125.79688,264.01953 M 106.64844,284.01953 L 106.64844,272.51172 L 109.01563,272.51172 L 109.01563,277.23828 L 113.50781,272.51172 L 116.46875,272.51172 L 111.875,277.16797 L 116.88281,284.01953 L 113.99219,284.01953 L 110.24219,278.75391 L 109.01563,279.97266 L 109.01563,284.01953 L 106.64844,284.01953 M 122.9375,281.44141 L 125.20313,281.44141 C 124.97395,282.33724 124.51041,283.04037 123.8125,283.55078 C 123.11979,284.05599 122.27343,284.30859 121.27344,284.30859 C 120.04427,284.30859 119.07031,283.89714 118.35156,283.07422 C 117.63281,282.2461 117.27344,281.1263 117.27344,279.71484 C 117.27344,278.32422 117.6276,277.22787 118.33594,276.42578 C 119.04427,275.62371 120.01302,275.22267 121.24219,275.22266 C 122.54427,275.22267 123.54947,275.6185 124.25781,276.41016 C 124.96614,277.19662 125.3203,278.31902 125.32031,279.77734 C 125.3203,279.93881 125.3177,280.0612 125.3125,280.14453 C 125.31249,280.22266 125.30728,280.29818 125.29688,280.37109 L 119.625,280.37109 C 119.65625,281.03776 119.81771,281.54037 120.10938,281.87891 C 120.40625,282.21745 120.83073,282.38672 121.38281,282.38672 C 121.77343,282.38672 122.09374,282.3112 122.34375,282.16016 C 122.59374,282.00391 122.79166,281.76433 122.9375,281.44141 M 119.625,278.87891 L 122.96875,278.87891 C 122.94791,278.306 122.79426,277.8711 122.50781,277.57422 C 122.22656,277.27214 121.82031,277.1211 121.28906,277.12109 C 120.79427,277.1211 120.40364,277.27214 120.11719,277.57422 C 119.83593,277.87631 119.67187,278.3112 119.625,278.87891 M 127.16406,287.42578 L 127.16406,285.58984 C 127.23698,285.60026 127.3125,285.60807 127.39063,285.61328 C 127.46875,285.61849 127.57031,285.62109 127.69531,285.62109 C 128.14323,285.62109 128.47916,285.51432 128.70313,285.30078 C 128.92708,285.09245 129.03906,284.77734 129.03906,284.35547 C 129.03906,284.32422 129.03385,284.28516 129.02344,284.23828 C 129.01302,284.19141 129.0026,284.15234 128.99219,284.12109 L 125.92969,275.52734 L 128.42969,275.52734 L 130.21875,281.65234 L 131.96094,275.52734 L 134.35156,275.52734 L 130.85938,285.54297 C 130.59895,286.29297 130.27343,286.80338 129.88281,287.07422 C 129.49218,287.35026 128.90625,287.48828 128.125,287.48828 C 127.98437,287.48828 127.83333,287.48307 127.67188,287.47266 C 127.51041,287.46224 127.34114,287.44661 127.16406,287.42578"
+       id="text5872" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 708.94531,264.01953 L 705.64844,252.51172 L 708.10156,252.51172 L 710.07031,260.62891 L 711.73438,252.51172 L 714.25781,252.51172 L 715.92188,260.62891 L 717.89063,252.51172 L 720.32031,252.51172 L 717.03125,264.01953 L 714.77344,264.01953 L 712.99219,255.20703 L 711.20313,264.01953 L 708.94531,264.01953 M 721.5,254.58203 L 721.5,252.51172 L 723.77344,252.51172 L 723.77344,254.58203 L 721.5,254.58203 M 721.5,264.01953 L 721.5,255.52734 L 723.77344,255.52734 L 723.77344,264.01953 L 721.5,264.01953 M 725.79688,264.01953 L 725.79688,255.52734 L 728.02344,255.52734 L 728.02344,256.53516 C 728.34114,256.12371 728.71614,255.81641 729.14844,255.61328 C 729.58072,255.40496 730.06249,255.30079 730.59375,255.30078 C 731.53124,255.30079 732.23176,255.54558 732.69531,256.03516 C 733.16405,256.51954 733.39843,257.25131 733.39844,258.23047 L 733.39844,264.01953 L 731.125,264.01953 L 731.125,258.88672 C 731.12499,258.27735 731.02083,257.84245 730.8125,257.58203 C 730.60937,257.32162 730.27604,257.19141 729.8125,257.19141 C 729.27604,257.19141 728.85156,257.35287 728.53906,257.67578 C 728.22656,257.9935 728.07031,258.42839 728.07031,258.98047 L 728.07031,264.01953 L 725.79688,264.01953 M 706.64844,284.01953 L 706.64844,272.51172 L 709.01563,272.51172 L 709.01563,277.23828 L 713.50781,272.51172 L 716.46875,272.51172 L 711.875,277.16797 L 716.88281,284.01953 L 713.99219,284.01953 L 710.24219,278.75391 L 709.01563,279.97266 L 709.01563,284.01953 L 706.64844,284.01953 M 722.9375,281.44141 L 725.20313,281.44141 C 724.97395,282.33724 724.51041,283.04037 723.8125,283.55078 C 723.11979,284.05599 722.27343,284.30859 721.27344,284.30859 C 720.04427,284.30859 719.07031,283.89714 718.35156,283.07422 C 717.63281,282.2461 717.27344,281.1263 717.27344,279.71484 C 717.27344,278.32422 717.6276,277.22787 718.33594,276.42578 C 719.04427,275.62371 720.01302,275.22267 721.24219,275.22266 C 722.54427,275.22267 723.54947,275.6185 724.25781,276.41016 C 724.96614,277.19662 725.3203,278.31902 725.32031,279.77734 C 725.3203,279.93881 725.3177,280.0612 725.3125,280.14453 C 725.31249,280.22266 725.30728,280.29818 725.29688,280.37109 L 719.625,280.37109 C 719.65625,281.03776 719.81771,281.54037 720.10938,281.87891 C 720.40625,282.21745 720.83073,282.38672 721.38281,282.38672 C 721.77343,282.38672 722.09374,282.3112 722.34375,282.16016 C 722.59374,282.00391 722.79166,281.76433 722.9375,281.44141 M 719.625,278.87891 L 722.96875,278.87891 C 722.94791,278.306 722.79426,277.8711 722.50781,277.57422 C 722.22656,277.27214 721.82031,277.1211 721.28906,277.12109 C 720.79427,277.1211 720.40364,277.27214 720.11719,277.57422 C 719.83593,277.87631 719.67187,278.3112 719.625,278.87891 M 727.16406,287.42578 L 727.16406,285.58984 C 727.23698,285.60026 727.3125,285.60807 727.39063,285.61328 C 727.46875,285.61849 727.57031,285.62109 727.69531,285.62109 C 728.14323,285.62109 728.47916,285.51432 728.70313,285.30078 C 728.92708,285.09245 729.03906,284.77734 729.03906,284.35547 C 729.03906,284.32422 729.03385,284.28516 729.02344,284.23828 C 729.01302,284.19141 729.0026,284.15234 728.99219,284.12109 L 725.92969,275.52734 L 728.42969,275.52734 L 730.21875,281.65234 L 731.96094,275.52734 L 734.35156,275.52734 L 730.85938,285.54297 C 730.59895,286.29297 730.27343,286.80338 729.88281,287.07422 C 729.49218,287.35026 728.90625,287.48828 728.125,287.48828 C 727.98437,287.48828 727.83333,287.48307 727.67188,287.47266 C 727.51041,287.46224 727.34114,287.44661 727.16406,287.42578"
+       id="text5878" />
+    <path
+       style="font-size:16px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 759.98438,275.60938 L 759.98438,264.10156 L 763.48438,264.10156 L 765.77344,272.85938 L 768.03125,264.10156 L 771.54688,264.10156 L 771.54688,275.60938 L 769.32813,275.60938 L 769.32813,266.32813 L 766.99219,275.60938 L 764.57031,275.60938 L 762.20313,266.32813 L 762.20313,275.60938 L 759.98438,275.60938 M 778.99219,273.03125 L 781.25781,273.03125 C 781.02864,273.92709 780.5651,274.63021 779.86719,275.14063 C 779.17447,275.64583 778.32812,275.89844 777.32813,275.89844 C 776.09896,275.89844 775.125,275.48698 774.40625,274.66406 C 773.6875,273.83594 773.32812,272.71615 773.32813,271.30469 C 773.32812,269.91407 773.68229,268.81772 774.39063,268.01563 C 775.09896,267.21355 776.06771,266.81251 777.29688,266.8125 C 778.59895,266.81251 779.60416,267.20834 780.3125,268 C 781.02083,268.78647 781.37499,269.90886 781.375,271.36719 C 781.37499,271.52865 781.37239,271.65105 781.36719,271.73438 C 781.36718,271.8125 781.36197,271.88802 781.35156,271.96094 L 775.67969,271.96094 C 775.71093,272.62761 775.87239,273.13021 776.16406,273.46875 C 776.46093,273.80729 776.88541,273.97656 777.4375,273.97656 C 777.82812,273.97656 778.14843,273.90104 778.39844,273.75 C 778.64843,273.59375 778.84635,273.35417 778.99219,273.03125 M 775.67969,270.46875 L 779.02344,270.46875 C 779.0026,269.89584 778.84895,269.46094 778.5625,269.16406 C 778.28124,268.86199 777.87499,268.71094 777.34375,268.71094 C 776.84895,268.71094 776.45833,268.86199 776.17188,269.16406 C 775.89062,269.46615 775.72656,269.90105 775.67969,270.46875 M 782.88281,275.60938 L 782.88281,267.11719 L 785.10938,267.11719 L 785.10938,268.125 C 785.42708,267.71355 785.80208,267.40626 786.23438,267.20313 C 786.66666,266.9948 787.14843,266.89063 787.67969,266.89063 C 788.61718,266.89063 789.3177,267.13543 789.78125,267.625 C 790.24999,268.10938 790.48437,268.84115 790.48438,269.82031 L 790.48438,275.60938 L 788.21094,275.60938 L 788.21094,270.47656 C 788.21093,269.86719 788.10676,269.4323 787.89844,269.17188 C 787.69531,268.91147 787.36197,268.78126 786.89844,268.78125 C 786.36197,268.78126 785.9375,268.94272 785.625,269.26563 C 785.3125,269.58334 785.15625,270.01823 785.15625,270.57031 L 785.15625,275.60938 L 782.88281,275.60938 M 800.01563,267.11719 L 800.01563,275.60938 L 797.78906,275.60938 L 797.78906,274.60156 C 797.46614,275.01302 797.08854,275.32292 796.65625,275.53125 C 796.22916,275.73437 795.74739,275.83594 795.21094,275.83594 C 794.27864,275.83594 793.57812,275.59115 793.10938,275.10156 C 792.64583,274.61198 792.41406,273.88021 792.41406,272.90625 L 792.41406,267.11719 L 794.6875,267.11719 L 794.6875,272.25 C 794.6875,272.85417 794.78906,273.28646 794.99219,273.54688 C 795.19531,273.80209 795.53125,273.92969 796,273.92969 C 796.53124,273.92969 796.95312,273.77084 797.26563,273.45313 C 797.58333,273.13021 797.74218,272.69271 797.74219,272.14063 L 797.74219,267.11719 L 800.01563,267.11719"
+       id="text5884" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 104.41406,17.103516 L 104.41406,10.212891 L 101.74219,10.212891 L 101.74219,8.7949219 L 101.94141,8.7949219 C 102.89453,8.7949367 103.58984,8.6621243 104.02734,8.3964844 C 104.47265,8.1308749 104.73828,7.6894691 104.82422,7.0722656 L 106.59375,7.0722656 L 106.59375,17.103516 L 104.41406,17.103516 M 106.72266,36.369141 L 106.72266,39.826172 L 103.24219,39.826172 L 103.24219,36.369141 L 106.72266,36.369141 M 105.89063,41.173828 L 106.80469,48.978516 L 106.80469,53.630859 L 103.19531,53.630859 L 103.19531,48.978516 L 104.10938,41.173828 L 105.89063,41.173828"
+       id="text5890" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 160.85156,47.103516 C 160.875,46.197273 161.08984,45.431649 161.49609,44.806641 C 161.91015,44.18165 162.63672,43.548838 163.67578,42.908203 C 163.82422,42.822276 164.03125,42.701183 164.29688,42.544922 C 165.74218,41.724621 166.46484,40.931653 166.46484,40.166016 C 166.46484,39.720717 166.32031,39.369155 166.03125,39.111328 C 165.74218,38.85353 165.34375,38.724624 164.83594,38.724609 C 164.27343,38.724624 163.83984,38.88478 163.53516,39.205078 C 163.23047,39.517592 163.07812,39.966811 163.07813,40.552734 L 163.07813,40.646484 L 161.03906,40.646484 C 161.03906,39.498061 161.37891,38.615249 162.05859,37.998047 C 162.73828,37.380876 163.71093,37.072282 164.97656,37.072266 C 166.11718,37.072282 167.02343,37.353532 167.69531,37.916016 C 168.37499,38.470718 168.71484,39.212905 168.71484,40.142578 C 168.71484,40.814466 168.53905,41.39259 168.1875,41.876953 C 167.83593,42.361339 167.14843,42.919933 166.125,43.552734 C 165.89843,43.701182 165.57812,43.896494 165.16406,44.138672 C 164.22656,44.685556 163.69922,45.115243 163.58203,45.427734 L 168.62109,45.427734 L 168.62109,47.103516 L 160.85156,47.103516"
+       id="text5910" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 220.92188,44.033203 L 223.05469,44.033203 C 223.07031,44.603525 223.22265,45.029305 223.51172,45.310547 C 223.80078,45.591805 224.23437,45.73243 224.8125,45.732422 C 225.36718,45.73243 225.79687,45.599617 226.10156,45.333984 C 226.40624,45.068368 226.55859,44.689462 226.55859,44.197266 C 226.55859,43.697276 226.38281,43.322276 226.03125,43.072266 C 225.67968,42.814464 225.15234,42.685558 224.44922,42.685547 L 224.10938,42.685547 L 224.10938,41.291016 L 224.35547,41.291016 C 225.0039,41.291028 225.48046,41.181653 225.78516,40.962891 C 226.09765,40.736341 226.2539,40.392591 226.25391,39.931641 C 226.2539,39.54103 226.12109,39.232436 225.85547,39.005859 C 225.58984,38.771499 225.23437,38.654312 224.78906,38.654297 C 224.29687,38.654312 223.91797,38.787124 223.65234,39.052734 C 223.38672,39.310561 223.2539,39.681655 223.25391,40.166016 L 223.25391,40.236328 L 221.16797,40.236328 C 221.19141,39.212905 221.51953,38.431656 222.15234,37.892578 C 222.79297,37.345719 223.70312,37.072282 224.88281,37.072266 C 225.99218,37.072282 226.86718,37.314469 227.50781,37.798828 C 228.15624,38.283218 228.48046,38.943374 228.48047,39.779297 C 228.48046,40.21681 228.36718,40.603529 228.14063,40.939453 C 227.92187,41.26759 227.59374,41.537121 227.15625,41.748047 C 227.72656,41.974621 228.15624,42.291027 228.44531,42.697266 C 228.74218,43.095714 228.89062,43.564463 228.89063,44.103516 C 228.89062,45.119149 228.52343,45.923836 227.78906,46.517578 C 227.06249,47.103522 226.07031,47.396491 224.8125,47.396484 C 223.57031,47.396491 222.60937,47.107428 221.92969,46.529297 C 221.25781,45.95118 220.92187,45.134774 220.92188,44.080078 L 220.92188,44.033203"
+       id="text5922" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 278.92969,21.685547 C 279.86719,21.037112 280.53125,20.439456 280.92188,19.892578 C 281.32031,19.345707 281.51953,18.75977 281.51953,18.134766 C 281.51953,17.837896 281.47265,17.525397 281.37891,17.197266 C 281.28515,16.861335 281.14843,16.509773 280.96875,16.142578 L 278.90625,16.142578 L 278.90625,14.841797 L 280.17188,14.841797 C 279.82812,14.162119 279.57812,13.556651 279.42188,13.025391 C 279.26562,12.494152 279.1875,11.998059 279.1875,11.537109 C 279.1875,10.146498 279.69531,9.021499 280.71094,8.1621094 C 281.73437,7.3027507 283.08203,6.8730636 284.75391,6.8730469 C 286.5664,6.8730636 287.98827,7.3379069 289.01953,8.2675781 C 290.05077,9.1972801 290.61327,10.517591 290.70703,12.228516 L 287.47266,12.228516 C 287.41015,11.345715 287.15624,10.669935 286.71094,10.201172 C 286.26562,9.7324358 285.65624,9.498061 284.88281,9.4980469 C 284.14843,9.498061 283.58203,9.6894671 283.18359,10.072266 C 282.79296,10.455091 282.59765,11.005872 282.59766,11.724609 C 282.59765,12.138683 282.84375,12.888683 283.33594,13.974609 C 283.50781,14.349619 283.63671,14.638681 283.72266,14.841797 L 287.0625,14.841797 L 287.0625,16.142578 L 284.20313,16.142578 C 284.27343,16.43946 284.32421,16.712898 284.35547,16.962891 C 284.38671,17.212897 284.40234,17.443366 284.40234,17.654297 C 284.40234,18.216802 284.22656,18.779302 283.875,19.341797 C 283.53124,19.896488 282.94531,20.548831 282.11719,21.298828 C 282.625,21.064456 283.08203,20.892581 283.48828,20.783203 C 283.90234,20.666019 284.27734,20.607425 284.61328,20.607422 C 285.01952,20.607425 285.57421,20.701175 286.27734,20.888672 C 286.98046,21.068362 287.48046,21.158206 287.77734,21.158203 C 288.16796,21.158206 288.55077,21.095706 288.92578,20.970703 C 289.30858,20.845706 289.68749,20.6543 290.0625,20.396484 L 291.09375,22.939453 C 290.4453,23.322266 289.82421,23.611328 289.23047,23.806641 C 288.63671,24.009765 288.08202,24.111328 287.56641,24.111328 C 286.97265,24.111328 286.16796,23.955078 285.15234,23.642578 C 284.14453,23.330078 283.41406,23.173829 282.96094,23.173828 C 282.48437,23.173829 282.01953,23.251954 281.56641,23.408203 C 281.12109,23.564453 280.6875,23.798828 280.26563,24.111328 L 278.92969,21.685547 M 284.94141,40.025391 C 284.05859,40.025404 283.29687,40.345716 282.65625,40.986328 C 282.01562,41.626965 281.69531,42.384777 281.69531,43.259766 C 281.69531,44.1504 282.01171,44.912118 282.64453,45.544922 C 283.27734,46.169929 284.04296,46.482429 284.94141,46.482422 C 285.82421,46.482429 286.58202,46.169929 287.21484,45.544922 C 287.85546,44.912118 288.17577,44.1504 288.17578,43.259766 C 288.17577,42.384777 287.85546,41.626965 287.21484,40.986328 C 286.58202,40.345716 285.82421,40.025404 284.94141,40.025391 M 279.65625,36.779297 L 282.05859,39.158203 C 282.48046,38.85353 282.92578,38.626968 283.39453,38.478516 C 283.86328,38.322281 284.37109,38.244156 284.91797,38.244141 C 285.46484,38.244156 285.97655,38.322281 286.45313,38.478516 C 286.93749,38.626968 287.39062,38.85353 287.8125,39.158203 L 290.19141,36.779297 L 291.42188,38.033203 L 289.04297,40.435547 C 289.33983,40.849622 289.56249,41.294934 289.71094,41.771484 C 289.85936,42.240246 289.93358,42.736339 289.93359,43.259766 C 289.93358,43.783213 289.85936,44.279306 289.71094,44.748047 C 289.56249,45.216805 289.33983,45.666024 289.04297,46.095703 L 291.42188,48.498047 L 290.19141,49.716797 L 287.8125,47.337891 C 287.39062,47.650397 286.9414,47.880865 286.46484,48.029297 C 285.98827,48.17774 285.48046,48.251959 284.94141,48.251953 C 284.3789,48.251959 283.85937,48.17774 283.38281,48.029297 C 282.91406,47.880865 282.47265,47.650397 282.05859,47.337891 L 279.65625,49.716797 L 278.4375,48.498047 L 280.80469,46.095703 C 280.50781,45.673836 280.28515,45.23243 280.13672,44.771484 C 279.99609,44.302744 279.92578,43.798838 279.92578,43.259766 C 279.92578,42.736339 279.99609,42.240246 280.13672,41.771484 C 280.28515,41.294934 280.50781,40.849622 280.80469,40.435547 L 278.4375,38.033203 L 279.65625,36.779297"
+       id="text5928" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 352.875,47.701172 C 352.74217,49.662113 351.98436,51.220706 350.60156,52.376953 C 349.22655,53.533203 347.42968,54.111328 345.21094,54.111328 C 342.65624,54.111328 340.66796,53.314453 339.24609,51.720703 C 337.83203,50.126957 337.125,47.892584 337.125,45.017578 C 337.125,42.08009 337.84765,39.830092 339.29297,38.267578 C 340.73828,36.705095 342.8164,35.923846 345.52734,35.923828 C 347.73046,35.923846 349.46874,36.462908 350.74219,37.541016 C 352.02342,38.611343 352.72655,40.126967 352.85156,42.087891 L 349.34766,42.087891 C 349.19921,41.111341 348.80077,40.369154 348.15234,39.861328 C 347.50389,39.345717 346.6289,39.087905 345.52734,39.087891 C 343.96484,39.087905 342.77734,39.591811 341.96484,40.599609 C 341.15234,41.607434 340.74609,43.080089 340.74609,45.017578 C 340.74609,46.892585 341.14843,48.341802 341.95313,49.365234 C 342.76562,50.388675 343.91796,50.900393 345.41016,50.900391 C 346.48827,50.900393 347.37108,50.626956 348.05859,50.080078 C 348.74608,49.525395 349.19139,48.732427 349.39453,47.701172 L 352.875,47.701172"
+       id="text5946" />
+    <path
+       transform="matrix(1.16233,0,-0.444745,0.860341,0,0)"
+       style="font-size:16.72912407px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 307.52845,53.268758 L 317.31434,53.268758 L 317.31434,54.894293 L 307.52845,54.894293 L 307.52845,53.268758 M 307.52845,49.756296 L 317.31434,49.756296 L 317.31434,51.381831 L 307.52845,51.381831 L 307.52845,49.756296"
+       id="text5956" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 411.45117,50.150391 L 411.45117,46.142578 L 408.63867,50.150391 L 411.45117,50.150391 M 411.45117,53.630859 L 411.45117,51.591797 L 406.98633,51.591797 L 406.98633,49.962891 L 410.90039,44.513672 L 413.51367,44.513672 L 413.51367,50.103516 L 414.73242,50.103516 L 414.73242,51.591797 L 413.51367,51.591797 L 413.51367,53.630859 L 411.45117,53.630859 M 398.58398,54.111328 L 408.7793,36.615234 L 410.70117,36.615234 L 400.48242,54.111328 L 398.58398,54.111328 M 397.78711,46.458984 L 397.78711,40.025391 L 395.26758,40.025391 L 395.26758,38.701172 L 395.44336,38.701172 C 396.36523,38.701187 397.0332,38.576187 397.44727,38.326172 C 397.86914,38.076187 398.11914,37.658219 398.19727,37.072266 L 399.88477,37.072266 L 399.88477,46.458984 L 397.78711,46.458984"
+       id="text5960" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 467.0918,53.630859 C 467.11522,52.779298 467.32225,52.064455 467.71289,51.486328 C 468.11131,50.900393 468.80663,50.31055 469.79883,49.716797 C 469.95506,49.630863 470.16991,49.50977 470.44336,49.353516 C 471.7949,48.595708 472.47068,47.861334 472.4707,47.150391 C 472.47068,46.736335 472.33006,46.40821 472.04883,46.166016 C 471.76756,45.923836 471.38475,45.802742 470.90039,45.802734 C 470.36912,45.802742 469.95506,45.95118 469.6582,46.248047 C 469.36913,46.544929 469.22459,46.966804 469.22461,47.513672 L 469.22461,47.607422 L 467.2793,47.607422 C 467.27928,46.529304 467.6035,45.70118 468.25195,45.123047 C 468.90038,44.537118 469.82616,44.24415 471.0293,44.244141 C 472.12303,44.24415 472.99412,44.505868 473.64258,45.029297 C 474.29881,45.552742 474.62693,46.251961 474.62695,47.126953 C 474.62693,47.751959 474.45506,48.294927 474.11133,48.755859 C 473.77537,49.208989 473.11522,49.72852 472.13086,50.314453 C 471.9199,50.439456 471.63084,50.607425 471.26367,50.818359 C 470.34959,51.341799 469.83397,51.744143 469.7168,52.025391 L 474.50977,52.025391 L 474.50977,53.630859 L 467.0918,53.630859 M 458.68945,54.111328 L 468.88477,36.615234 L 470.80664,36.615234 L 460.58789,54.111328 L 458.68945,54.111328 M 457.89258,46.458984 L 457.89258,40.025391 L 455.37305,40.025391 L 455.37305,38.701172 L 455.54883,38.701172 C 456.4707,38.701187 457.13867,38.576187 457.55273,38.326172 C 457.97461,38.076187 458.22461,37.658219 458.30273,37.072266 L 459.99023,37.072266 L 459.99023,46.458984 L 457.89258,46.458984"
+       id="text5967" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 531.83203,50.150391 L 531.83203,46.142578 L 529.01953,50.150391 L 531.83203,50.150391 M 531.83203,53.630859 L 531.83203,51.591797 L 527.36719,51.591797 L 527.36719,49.962891 L 531.28125,44.513672 L 533.89453,44.513672 L 533.89453,50.103516 L 535.11328,50.103516 L 535.11328,51.591797 L 533.89453,51.591797 L 533.89453,53.630859 L 531.83203,53.630859 M 518.96484,54.111328 L 529.16016,36.615234 L 531.08203,36.615234 L 520.86328,54.111328 L 518.96484,54.111328 M 514.88672,43.599609 L 516.89063,43.599609 C 516.91406,44.130869 517.0625,44.529306 517.33594,44.794922 C 517.61718,45.052743 518.03125,45.181649 518.57813,45.181641 C 519.10937,45.181649 519.51953,45.060555 519.80859,44.818359 C 520.09765,44.568368 520.24218,44.208994 520.24219,43.740234 C 520.24218,43.271495 520.07421,42.919933 519.73828,42.685547 C 519.40234,42.443371 518.90625,42.322277 518.25,42.322266 C 518.20312,42.322277 518.14453,42.326183 518.07422,42.333984 C 518.0039,42.341808 517.94922,42.345714 517.91016,42.345703 L 517.91016,41.033203 L 518.14453,41.033203 C 518.76171,41.033216 519.21484,40.931653 519.50391,40.728516 C 519.80078,40.517591 519.94921,40.193373 519.94922,39.755859 C 519.94921,39.388686 519.82421,39.099624 519.57422,38.888672 C 519.32421,38.669937 518.98437,38.560562 518.55469,38.560547 C 518.08593,38.560562 517.72265,38.685562 517.46484,38.935547 C 517.21484,39.177749 517.08984,39.525405 517.08984,39.978516 L 517.08984,40.048828 L 515.08594,40.048828 C 515.10156,39.087905 515.41797,38.353531 516.03516,37.845703 C 516.65234,37.330094 517.52343,37.072282 518.64844,37.072266 C 519.70312,37.072282 520.53906,37.302751 521.15625,37.763672 C 521.77343,38.216812 522.08202,38.833999 522.08203,39.615234 C 522.08202,40.02931 521.97655,40.392591 521.76563,40.705078 C 521.55468,41.009778 521.23827,41.263684 520.81641,41.466797 C 521.36327,41.677746 521.77343,41.970715 522.04688,42.345703 C 522.32812,42.712902 522.46874,43.154307 522.46875,43.669922 C 522.46874,44.607431 522.11718,45.349618 521.41406,45.896484 C 520.71874,46.443367 519.77343,46.716804 518.57813,46.716797 C 517.39062,46.716804 516.47656,46.451179 515.83594,45.919922 C 515.20312,45.380868 514.88672,44.615243 514.88672,43.623047 L 514.88672,43.599609"
+       id="text5973" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 586.63477,39.404297 L 586.63477,42.498047 L 583.36523,42.498047 L 583.36523,39.474609 C 583.36523,38.482437 583.66992,37.654313 584.2793,36.990234 C 584.88867,36.326189 585.67382,35.970721 586.63477,35.923828 L 586.63477,37.119141 C 586.04101,37.259782 585.59961,37.509782 585.31055,37.869141 C 585.02148,38.220719 584.87695,38.681656 584.87695,39.251953 L 584.87695,39.404297 L 586.63477,39.404297"
+       id="text5979" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 643.36523,39.474609 L 643.36523,36.369141 L 646.63477,36.369141 L 646.63477,39.427734 C 646.63476,40.412123 646.33007,41.240247 645.7207,41.912109 C 645.11132,42.576183 644.32617,42.931651 643.36523,42.978516 L 643.36523,41.771484 C 643.95898,41.630871 644.39648,41.384778 644.67773,41.033203 C 644.96679,40.673841 645.11132,40.201185 645.11133,39.615234 L 645.11133,39.474609 L 643.36523,39.474609"
+       id="text5985" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 706.89258,53.630859 L 703.50586,53.630859 L 703.50586,47.560547 L 703.27148,47.150391 L 698.00977,47.150391 L 698.00977,45.826172 L 702.49805,45.826172 L 701.64258,44.337891 L 698.00977,44.337891 L 698.00977,43.025391 L 700.86914,43.025391 L 697.61133,37.330078 L 701.41992,37.330078 L 705.19336,44.724609 L 708.69727,37.330078 L 712.27148,37.330078 L 709.27148,43.025391 L 712.00195,43.025391 L 712.00195,44.337891 L 708.58008,44.337891 L 707.7832,45.826172 L 712.00195,45.826172 L 712.00195,47.150391 L 707.0918,47.150391 L 706.89258,47.560547 L 706.89258,53.630859"
+       id="text5991" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 764.97656,19.306641 C 765.46093,19.306645 765.8789,19.482426 766.23047,19.833984 C 766.58202,20.18555 766.7578,20.603519 766.75781,21.087891 C 766.7578,21.564455 766.58202,21.974611 766.23047,22.318359 C 765.8789,22.66211 765.46093,22.833985 764.97656,22.833984 C 764.48437,22.833985 764.06249,22.666017 763.71094,22.330078 C 763.36718,21.994142 763.1953,21.58008 763.19531,21.087891 C 763.1953,20.595706 763.36718,20.177738 763.71094,19.833984 C 764.06249,19.482426 764.48437,19.306645 764.97656,19.306641 M 757.94531,15.298828 L 771.98438,15.298828 L 771.98438,17.630859 L 757.94531,17.630859 L 757.94531,15.298828 M 764.97656,10.095703 C 765.46093,10.095717 765.8789,10.271498 766.23047,10.623047 C 766.58202,10.96681 766.7578,11.380872 766.75781,11.865234 C 766.7578,12.357433 766.58202,12.779308 766.23047,13.130859 C 765.88671,13.47462 765.46874,13.646494 764.97656,13.646484 C 764.48437,13.646494 764.06249,13.47462 763.71094,13.130859 C 763.36718,12.779308 763.1953,12.357433 763.19531,11.865234 C 763.1953,11.373059 763.36718,10.955091 763.71094,10.611328 C 764.06249,10.267591 764.48437,10.095717 764.97656,10.095703 M 759.84375,39.544922 L 765.11719,44.818359 L 770.40234,39.544922 L 772.05469,41.173828 L 766.78125,46.482422 L 772.05469,51.755859 L 770.40234,53.396484 L 765.11719,48.111328 L 759.84375,53.396484 L 758.20313,51.755859 L 763.48828,46.482422 L 758.20313,41.173828 L 759.84375,39.544922"
+       id="text5997" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 134.9707,69.826172 L 132.58008,77.173828 L 137.37305,77.173828 L 134.9707,69.826172 M 132.9082,66.369141 L 137.00977,66.369141 L 143.23242,83.630859 L 139.50586,83.630859 L 138.33398,80.080078 L 131.64258,80.080078 L 130.50586,83.630859 L 126.76758,83.630859 L 132.9082,66.369141 M 135.70898,64.166016 L 135.70898,61.283203 L 138.35742,61.283203 L 138.35742,64.166016 L 135.70898,64.166016 M 131.63086,64.166016 L 131.63086,61.283203 L 134.2793,61.283203 L 134.2793,64.166016 L 131.63086,64.166016"
+       id="text6003" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 194.9707,62.126953 C 194.5957,62.126975 194.27538,62.267599 194.00977,62.548828 C 193.74413,62.822286 193.61132,63.154317 193.61133,63.544922 C 193.61132,63.927754 193.74023,64.251973 193.99805,64.517578 C 194.26366,64.783222 194.58788,64.916034 194.9707,64.916016 C 195.36132,64.916034 195.69335,64.783222 195.9668,64.517578 C 196.24804,64.24416 196.38866,63.919942 196.38867,63.544922 C 196.38866,63.16213 196.24804,62.830099 195.9668,62.548828 C 195.69335,62.267599 195.36132,62.126975 194.9707,62.126953 M 194.9707,60.521484 C 195.81444,60.521507 196.52929,60.814476 197.11523,61.400391 C 197.70116,61.978537 197.99413,62.685568 197.99414,63.521484 C 197.99413,64.357441 197.70116,65.068378 197.11523,65.654297 C 196.52929,66.232439 195.81444,66.521501 194.9707,66.521484 C 194.13476,66.521501 193.42773,66.232439 192.84961,65.654297 C 192.27929,65.07619 191.99414,64.365254 191.99414,63.521484 C 191.99414,62.677755 192.27929,61.966819 192.84961,61.388672 C 193.42773,60.81057 194.13476,60.521507 194.9707,60.521484 M 192.7207,67.072266 L 197.23242,67.072266 L 203.23242,83.630859 L 199.50586,83.630859 L 198.33398,80.080078 L 191.64258,80.080078 L 190.50586,83.630859 L 186.76758,83.630859 L 192.7207,67.072266 M 194.9707,69.826172 L 192.58008,77.173828 L 197.37305,77.173828 L 194.9707,69.826172"
+       id="text6007" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 248.52539,83.630859 L 248.52539,66.369141 L 261.05273,66.369141 L 261.05273,69.369141 L 252.0293,69.369141 L 252.0293,73.048828 L 260.2793,73.048828 L 260.2793,76.001953 L 252.0293,76.001953 L 252.0293,80.443359 L 261.47461,80.443359 L 261.47461,83.630859 L 248.52539,83.630859 M 258.24023,60.521484 L 254.57227,64.857422 L 252.9082,64.857422 L 255.2168,60.521484 L 258.24023,60.521484"
+       id="text6011" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 313.72266,101.49056 L 313.72266,104.29134 L 314.88281,104.29134 C 315.5703,104.29135 316.07421,104.18198 316.39453,103.96322 C 316.71483,103.74448 316.87499,103.40073 316.875,102.93197 C 316.87499,102.43979 316.70311,102.07651 316.35938,101.84212 C 316.01561,101.60776 315.48436,101.49057 314.76563,101.49056 L 313.72266,101.49056 M 311.37891,100.00228 L 315.16406,100.00228 C 316.53905,100.00229 317.5703,100.23667 318.25781,100.70541 C 318.95311,101.16636 319.30077,101.85776 319.30078,102.77962 C 319.30077,103.42026 319.11327,103.96713 318.73828,104.42025 C 318.36327,104.87338 317.84374,105.18198 317.17969,105.34603 L 319.34766,109.67025 L 316.72266,109.67025 L 314.88281,105.70931 L 313.72266,105.70931 L 313.72266,109.67025 L 311.37891,109.67025 L 311.37891,100.00228 M 315,97.717125 C 314.0078,97.717141 313.08593,97.892922 312.23438,98.244469 C 311.38281,98.588234 310.61718,99.099952 309.9375,99.779625 C 309.22656,100.49058 308.67968,101.29917 308.29688,102.20541 C 307.91406,103.10385 307.72265,104.03354 307.72266,104.99447 C 307.72265,105.96323 307.90234,106.8851 308.26172,107.76009 C 308.62109,108.62729 309.14062,109.40072 309.82031,110.08041 C 310.51562,110.79135 311.30859,111.33822 312.19922,111.72103 C 313.08984,112.09603 314.01562,112.28353 314.97656,112.28353 C 315.91405,112.28353 316.82421,112.09994 317.70703,111.73275 C 318.59764,111.36556 319.40624,110.83822 320.13281,110.15072 C 320.81248,109.49447 321.33983,108.72885 321.71484,107.85384 C 322.08983,106.97885 322.27733,106.0726 322.27734,105.13509 C 322.27733,104.09604 322.10155,103.13901 321.75,102.264 C 321.40623,101.38901 320.89061,100.60386 320.20313,99.908531 C 319.49999,99.181983 318.70702,98.635109 317.82422,98.267906 C 316.94921,97.900734 316.0078,97.717141 315,97.717125 M 314.97656,96.275719 C 316.17968,96.275736 317.31249,96.502298 318.375,96.955406 C 319.4453,97.400735 320.39842,98.049172 321.23438,98.900719 C 322.03905,99.713233 322.65233,100.64292 323.07422,101.68978 C 323.49608,102.73667 323.70701,103.84604 323.70703,105.01791 C 323.70701,106.20541 323.48826,107.33041 323.05078,108.39291 C 322.61326,109.4476 321.97655,110.37728 321.14063,111.18197 C 320.30467,112.00228 319.35155,112.63119 318.28125,113.06869 C 317.21874,113.50619 316.11718,113.72494 314.97656,113.72494 C 313.81249,113.72494 312.69921,113.49838 311.63672,113.04525 C 310.57421,112.59213 309.625,111.93978 308.78906,111.08822 C 307.97656,110.26791 307.35547,109.33822 306.92578,108.29916 C 306.5039,107.25229 306.29297,106.15854 306.29297,105.01791 C 306.29297,104.22104 306.39844,103.4476 306.60938,102.69759 C 306.82031,101.93979 307.13672,101.20151 307.55859,100.48275 C 308.34765,99.154639 309.39062,98.12339 310.6875,97.389 C 311.98437,96.646829 313.41405,96.275736 314.97656,96.275719"
+       id="text6015" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 372.0293,69.064453 L 376.06055,69.064453 C 377.84179,69.064468 379.18944,69.505874 380.10352,70.388672 C 381.01756,71.263684 381.47459,72.556652 381.47461,74.267578 C 381.47459,75.939461 381.02538,77.228522 380.12695,78.134766 C 379.23632,79.033208 377.95897,79.482426 376.29492,79.482422 L 372.0293,79.482422 L 372.0293,83.630859 L 368.52539,83.630859 L 368.52539,66.369141 L 372.0293,66.369141 L 372.0293,69.064453 M 372.05273,76.599609 L 375.47461,76.599609 C 376.4121,76.599616 377.09179,76.416023 377.51367,76.048828 C 377.93554,75.673836 378.14647,75.080087 378.14648,74.267578 C 378.14647,73.509776 377.93554,72.939464 377.51367,72.556641 C 377.09179,72.166027 376.47069,71.970715 375.65039,71.970703 L 372.05273,71.970703 L 372.05273,76.599609"
+       id="text6019" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 428.08594,66.322266 L 431.67188,66.322266 L 431.67188,77.150391 C 431.67187,78.486333 431.93749,79.462895 432.46875,80.080078 C 432.99999,80.689456 433.84374,80.994143 435,80.994141 C 436.17187,80.994143 437.02343,80.689456 437.55469,80.080078 C 438.09374,79.470707 438.36327,78.494146 438.36328,77.150391 L 438.36328,66.322266 L 441.91406,66.322266 L 441.91406,77.537109 C 441.91405,79.654301 441.3203,81.279299 440.13281,82.412109 C 438.95311,83.544922 437.24999,84.111328 435.02344,84.111328 C 432.78124,84.111328 431.0625,83.548828 429.86719,82.423828 C 428.67969,81.291018 428.08594,79.662113 428.08594,77.537109 L 428.08594,66.322266 M 435.73828,64.166016 L 435.73828,61.283203 L 438.38672,61.283203 L 438.38672,64.166016 L 435.73828,64.166016 M 431.66016,64.166016 L 431.66016,61.283203 L 434.30859,61.283203 L 434.30859,64.166016 L 431.66016,64.166016"
+       id="text6023" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 488.08594,66.105469 L 491.67188,66.105469 L 491.67188,76.933594 C 491.67187,78.269536 491.93749,79.246098 492.46875,79.863281 C 492.99999,80.472659 493.84374,80.777346 495,80.777344 C 496.17187,80.777346 497.02343,80.472659 497.55469,79.863281 C 498.09374,79.25391 498.36327,78.277349 498.36328,76.933594 L 498.36328,66.105469 L 501.91406,66.105469 L 501.91406,77.320313 C 501.91405,79.437504 501.3203,81.062502 500.13281,82.195313 C 498.95311,83.328125 497.24999,83.894531 495.02344,83.894531 C 492.78124,83.894531 491.0625,83.332031 489.86719,82.207031 C 488.67969,81.074221 488.08594,79.445316 488.08594,77.320313 L 488.08594,66.105469 M 498.45703,60.304688 L 494.78906,64.640625 L 493.125,64.640625 L 495.43359,60.304688 L 498.45703,60.304688"
+       id="text6029" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 552.43945,83.630859 L 552.43945,66.369141 L 555.99023,66.369141 L 555.99023,83.630859 L 552.43945,83.630859 M 557.66602,60.521484 L 553.99805,64.857422 L 552.33398,64.857422 L 554.64258,60.521484 L 557.66602,60.521484"
+       id="text6033" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 610.18359,75 C 610.18359,76.898444 610.60546,78.375005 611.44922,79.429688 C 612.29296,80.476566 613.47265,81.000003 614.98828,81 C 616.51952,81.000003 617.71093,80.476566 618.5625,79.429688 C 619.41405,78.375005 619.83983,76.898444 619.83984,75 C 619.83983,73.101573 619.41405,71.628918 618.5625,70.582031 C 617.71093,69.527358 616.51952,69.000015 614.98828,69 C 613.47265,69.000015 612.29296,69.523452 611.44922,70.570313 C 610.60546,71.617199 610.18359,73.093761 610.18359,75 M 606.5625,75 C 606.5625,72.210949 607.32031,70.000014 608.83594,68.367188 C 610.35937,66.726579 612.41015,65.906268 614.98828,65.90625 C 617.56639,65.906268 619.61717,66.726579 621.14063,68.367188 C 622.67186,70.007826 623.43748,72.218761 623.4375,75 C 623.43748,77.781256 622.67186,79.992191 621.14063,81.632813 C 619.61717,83.273438 617.56639,84.09375 614.98828,84.09375 C 612.41015,84.09375 610.35937,83.273438 608.83594,81.632813 C 607.32031,79.992191 606.5625,77.781256 606.5625,75 M 618.44531,60.503906 L 614.77734,64.839844 L 613.11328,64.839844 L 615.42188,60.503906 L 618.44531,60.503906"
+       id="text6037" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 670.18359,75.017578 C 670.18359,76.916022 670.60546,78.392583 671.44922,79.447266 C 672.29296,80.494144 673.47265,81.017581 674.98828,81.017578 C 676.51952,81.017581 677.71093,80.494144 678.5625,79.447266 C 679.41405,78.392583 679.83983,76.916022 679.83984,75.017578 C 679.83983,73.119151 679.41405,71.646496 678.5625,70.599609 C 677.71093,69.544936 676.51952,69.017593 674.98828,69.017578 C 673.47265,69.017593 672.29296,69.54103 671.44922,70.587891 C 670.60546,71.634778 670.18359,73.111339 670.18359,75.017578 M 666.5625,75.017578 C 666.5625,72.228527 667.32031,70.017592 668.83594,68.384766 C 670.35937,66.744158 672.41015,65.923846 674.98828,65.923828 C 677.56639,65.923846 679.61717,66.744158 681.14063,68.384766 C 682.67186,70.025404 683.43748,72.23634 683.4375,75.017578 C 683.43748,77.798834 682.67186,80.009769 681.14063,81.650391 C 679.61717,83.291016 677.56639,84.111328 674.98828,84.111328 C 672.41015,84.111328 670.35937,83.291016 668.83594,81.650391 C 667.32031,80.009769 666.5625,77.798834 666.5625,75.017578 M 675.72656,64.166016 L 675.72656,61.283203 L 678.375,61.283203 L 678.375,64.166016 L 675.72656,64.166016 M 671.64844,64.166016 L 671.64844,61.283203 L 674.29688,61.283203 L 674.29688,64.166016 L 671.64844,64.166016"
+       id="text6041" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 735.5332,106.35352 L 735.5332,103.35352 L 739.44727,99.966797 L 739.44727,102.75586 L 737.04492,104.8418 L 739.44727,106.92773 L 739.44727,109.74023 L 735.5332,106.35352 M 730.4707,106.35352 L 730.4707,103.35352 L 734.4082,99.966797 L 734.4082,102.75586 L 732.00586,104.8418 L 734.4082,106.92773 L 734.4082,109.74023 L 730.4707,106.35352"
+       id="text6045" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 799.44727,103.3418 L 799.44727,106.3418 L 795.5332,109.72852 L 795.5332,106.93945 L 797.93555,104.83008 L 795.5332,102.76758 L 795.5332,99.955078 L 799.44727,103.3418 M 794.4082,103.3418 L 794.4082,106.3418 L 790.4707,109.72852 L 790.4707,106.93945 L 792.86133,104.83008 L 790.4707,102.76758 L 790.4707,99.955078 L 794.4082,103.3418"
+       id="text6051" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 883.81641,76.535881 L 886.23047,76.535881 L 886.23047,85.418694 L 883.81641,85.418694 L 883.81641,76.535881 M 883.81641,64.535881 L 886.23047,64.535881 L 886.23047,73.418694 L 883.81641,73.418694 L 883.81641,64.535881 M 877.98047,101.19213 L 892.01953,101.19213 L 892.01953,107.07494 L 889.6875,107.07494 L 889.6875,103.48901 L 877.98047,103.48901 L 877.98047,101.19213"
+       id="text6057" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 149.9707,129.82617 L 147.58008,137.17383 L 152.37305,137.17383 L 149.9707,129.82617 M 147.9082,126.36914 L 152.00977,126.36914 L 158.23242,143.63086 L 154.50586,143.63086 L 153.33398,140.08008 L 146.64258,140.08008 L 145.50586,143.63086 L 141.76758,143.63086 L 147.9082,126.36914 M 153.42773,120.52148 L 149.75977,124.85742 L 148.0957,124.85742 L 150.4043,120.52148 L 153.42773,120.52148"
+       id="text6065" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 211.40625,137.91797 C 211.71874,137.73829 211.95312,137.53907 212.10938,137.32031 C 212.26562,137.10157 212.34374,136.86719 212.34375,136.61719 C 212.34374,136.31251 212.2539,136.0547 212.07422,135.84375 C 211.89452,135.62501 211.52343,135.3711 210.96094,135.08203 L 207.85547,133.47656 C 207.55078,133.65626 207.3164,133.85938 207.15234,134.08594 C 206.99609,134.31251 206.91797,134.5547 206.91797,134.8125 C 206.91797,135.1172 207.03125,135.38673 207.25781,135.62109 C 207.49218,135.84766 208.0039,136.16407 208.79297,136.57031 L 211.40625,137.91797 M 205.03125,141.75 L 207.92578,141.75 C 207.98828,142.35938 208.16796,142.8125 208.46484,143.10938 C 208.76953,143.40625 209.19921,143.55469 209.75391,143.55469 C 210.26952,143.55469 210.67968,143.43359 210.98438,143.19141 C 211.28905,142.94141 211.4414,142.60547 211.44141,142.18359 C 211.4414,141.83985 211.32812,141.54297 211.10156,141.29297 C 210.87499,141.03516 210.42577,140.74219 209.75391,140.41406 L 206.95313,138.99609 C 206.0625,138.55079 205.39844,138.03907 204.96094,137.46094 C 204.52344,136.88282 204.30469,136.23438 204.30469,135.51563 C 204.30469,134.82032 204.47266,134.21095 204.80859,133.6875 C 205.15234,133.15626 205.65625,132.71485 206.32031,132.36328 C 205.92969,132.01173 205.64062,131.62892 205.45313,131.21484 C 205.26562,130.79298 205.17187,130.32814 205.17188,129.82031 C 205.17187,128.64845 205.57422,127.70705 206.37891,126.99609 C 207.18359,126.27736 208.2539,125.91799 209.58984,125.91797 C 210.96484,125.91799 212.04296,126.26955 212.82422,126.97266 C 213.60546,127.6758 214.0078,128.64845 214.03125,129.89063 L 211.26563,129.89063 C 211.24999,129.3672 211.09374,128.96876 210.79688,128.69531 C 210.50781,128.42189 210.08984,128.28517 209.54297,128.28516 C 209.05859,128.28517 208.68359,128.39064 208.41797,128.60156 C 208.16015,128.81251 208.03125,129.10939 208.03125,129.49219 C 208.03125,129.8047 208.18359,130.09767 208.48828,130.37109 C 208.80078,130.63673 209.35937,130.95704 210.16406,131.33203 L 212.13281,132.24609 C 213.1328,132.72267 213.87108,133.25392 214.34766,133.83984 C 214.82421,134.41798 215.06249,135.08595 215.0625,135.84375 C 215.06249,136.55469 214.8828,137.17579 214.52344,137.70703 C 214.17186,138.23047 213.66405,138.63672 213,138.92578 C 213.45312,139.32422 213.79296,139.76563 214.01953,140.25 C 214.24608,140.73438 214.35936,141.26563 214.35938,141.84375 C 214.35936,143.04688 213.92968,144.03906 213.07031,144.82031 C 212.21093,145.60937 211.10546,146.0039 209.75391,146.00391 C 208.26953,146.0039 207.1289,145.64453 206.33203,144.92578 C 205.53515,144.20703 205.10156,143.14844 205.03125,141.75 M 203.97656,173.625 L 203.97656,160.59375 C 203.97656,159.29689 204.48047,158.25002 205.48828,157.45313 C 206.49609,156.64845 207.83984,156.24611 209.51953,156.24609 C 211.23046,156.24611 212.5703,156.63674 213.53906,157.41797 C 214.5078,158.19923 214.99217,159.27345 214.99219,160.64063 C 214.99217,161.48439 214.84764,162.17579 214.55859,162.71484 C 214.27733,163.25392 213.83983,163.66798 213.24609,163.95703 C 214.16796,164.32423 214.85936,164.86329 215.32031,165.57422 C 215.78905,166.28516 216.02342,167.16016 216.02344,168.19922 C 216.02342,169.94922 215.51952,171.36328 214.51172,172.44141 C 213.5039,173.51953 212.18358,174.05859 210.55078,174.05859 C 210.32421,174.05859 210.0703,174.04687 209.78906,174.02344 C 209.51562,174 209.21874,173.96484 208.89844,173.91797 L 208.89844,171.17578 C 208.99999,171.19141 209.10156,171.20313 209.20313,171.21094 C 209.31249,171.21875 209.47265,171.22266 209.68359,171.22266 C 210.60546,171.22266 211.3164,170.96875 211.81641,170.46094 C 212.3164,169.94532 212.5664,169.21485 212.56641,168.26953 C 212.5664,167.35548 212.29296,166.66016 211.74609,166.18359 C 211.20702,165.70704 210.41796,165.46876 209.37891,165.46875 L 209.0625,165.46875 L 209.07422,163.06641 C 209.12109,163.07423 209.17187,163.08204 209.22656,163.08984 C 209.28124,163.08985 209.36327,163.08985 209.47266,163.08984 C 210.16796,163.08985 210.6953,162.91798 211.05469,162.57422 C 211.42187,162.22267 211.60546,161.71486 211.60547,161.05078 C 211.60546,160.38673 211.41405,159.88283 211.03125,159.53906 C 210.65624,159.18751 210.10546,159.01173 209.37891,159.01172 C 208.70703,159.01173 208.19531,159.20705 207.84375,159.59766 C 207.49218,159.98048 207.3164,160.54298 207.31641,161.28516 L 207.31641,173.625 L 203.97656,173.625"
+       id="text6073" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 267.09961,140.51367 L 269.94727,140.51367 C 271.60351,140.51367 272.80272,140.08008 273.54492,139.21289 C 274.2871,138.34571 274.65819,136.94727 274.6582,135.01758 C 274.65819,133.09571 274.31053,131.68165 273.61523,130.77539 C 272.92772,129.86134 271.8496,129.40431 270.38086,129.4043 L 267.09961,129.4043 L 267.09961,133.23633 L 270.88477,133.23633 L 270.88477,135.47461 L 267.09961,135.47461 L 267.09961,140.51367 M 263.61914,143.63086 L 263.61914,135.47461 L 261.74414,135.47461 L 261.74414,133.23633 L 263.61914,133.23633 L 263.61914,126.36914 L 270.4043,126.36914 C 273.04491,126.36916 275.01366,127.084 276.31055,128.51367 C 277.60741,129.93556 278.25584,132.10353 278.25586,135.01758 C 278.25584,136.60352 278.01756,137.99805 277.54102,139.20117 C 277.07225,140.4043 276.38084,141.36914 275.4668,142.0957 C 274.77928,142.64258 273.99413,143.03711 273.11133,143.2793 C 272.23632,143.51367 271.00585,143.63086 269.41992,143.63086 L 263.61914,143.63086"
+       id="text6077" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 626.72461,139.55273 C 627.17773,140.04493 627.68945,140.41211 628.25977,140.6543 C 628.83007,140.89649 629.47069,141.01758 630.18164,141.01758 C 631.71288,141.01758 632.90428,140.49414 633.75586,139.44727 C 634.60741,138.39258 635.03319,136.91602 635.0332,135.01758 C 635.03319,134.24415 634.96288,133.54493 634.82227,132.91992 C 634.68163,132.28712 634.4785,131.73634 634.21289,131.26758 L 626.72461,139.55273 M 625.98633,138.36914 L 633.39258,130.21289 C 632.9785,129.81447 632.50585,129.51759 631.97461,129.32227 C 631.44335,129.11916 630.84569,129.01759 630.18164,129.01758 C 628.66601,129.01759 627.48632,129.54103 626.64258,130.58789 C 625.79882,131.63478 625.37695,133.11134 625.37695,135.01758 C 625.37695,135.72071 625.42382,136.34571 625.51758,136.89258 C 625.61914,137.43946 625.77539,137.93165 625.98633,138.36914 M 621.36914,143.36133 L 623.51367,140.9707 C 622.91992,140.16602 622.47851,139.27149 622.18945,138.28711 C 621.90039,137.29493 621.75586,136.20509 621.75586,135.01758 C 621.75586,132.22853 622.51367,130.01759 624.0293,128.38477 C 625.55273,126.74416 627.60351,125.92385 630.18164,125.92383 C 631.28319,125.92385 632.27147,126.06447 633.14648,126.3457 C 634.02928,126.62697 634.84178,127.06056 635.58398,127.64648 L 637.30664,125.70117 L 638.45508,126.73242 L 636.63867,128.70117 C 637.30272,129.5215 637.79881,130.45509 638.12695,131.50195 C 638.46287,132.54884 638.63084,133.72071 638.63086,135.01758 C 638.63084,137.79883 637.86912,140.00977 636.3457,141.65039 C 634.82225,143.29102 632.76757,144.11133 630.18164,144.11133 C 629.01757,144.11133 627.96679,143.94727 627.0293,143.61914 C 626.0996,143.29102 625.26367,142.79102 624.52148,142.11914 L 622.50586,144.4043 L 621.36914,143.36133"
+       id="text6081" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 690,127.98633 C 689.42968,127.98634 688.9414,128.18556 688.53516,128.58398 C 688.13672,128.98244 687.9375,129.4629 687.9375,130.02539 C 687.9375,130.60353 688.13672,131.09181 688.53516,131.49023 C 688.93359,131.88868 689.42187,132.0879 690,132.08789 C 690.5625,132.0879 691.04296,131.88478 691.44141,131.47852 C 691.83984,131.07228 692.03906,130.5879 692.03906,130.02539 C 692.03906,129.4629 691.83984,128.98244 691.44141,128.58398 C 691.04296,128.18556 690.5625,127.98634 690,127.98633 M 690,126.47461 C 690.98437,126.47463 691.82031,126.82619 692.50781,127.5293 C 693.20312,128.22462 693.55077,129.06447 693.55078,130.04883 C 693.55077,131.0254 693.20312,131.86134 692.50781,132.55664 C 691.81249,133.25196 690.96875,133.59962 689.97656,133.59961 C 688.99218,133.59962 688.15625,133.25587 687.46875,132.56836 C 686.78906,131.88087 686.44922,131.04103 686.44922,130.04883 C 686.44922,129.05666 686.79297,128.21291 687.48047,127.51758 C 688.17578,126.82228 689.01562,126.47463 690,126.47461 M 695.51953,156.29883 L 695.51953,157.59961 L 694.19531,157.59961 L 694.19531,173.63086 L 692.42578,173.63086 L 692.42578,157.59961 L 690.57422,157.59961 L 690.57422,173.63086 L 688.78125,173.63086 L 688.78125,164.44336 C 687.47656,164.39649 686.43359,164.00196 685.65234,163.25977 C 684.87109,162.51759 684.48047,161.56056 684.48047,160.38867 C 684.48047,159.15431 684.89844,158.16603 685.73438,157.42383 C 686.57031,156.67385 687.67968,156.29885 689.0625,156.29883 L 695.51953,156.29883"
+       id="text6085" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 373.13672,6.5214844 L 376.08984,6.5214844 L 381.72656,13.095703 L 378.97266,13.095703 L 374.625,8.7480469 L 370.25391,13.095703 L 367.5,13.095703 L 373.13672,6.5214844"
+       id="text6091" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 750.67969,128.67773 L 750.67969,125.79492 L 753.32813,125.79492 L 753.32813,128.67773 L 750.67969,128.67773 M 746.60156,128.67773 L 746.60156,125.79492 L 749.25,125.79492 L 749.25,128.67773 L 746.60156,128.67773 M 753.39844,155.0332 L 749.73047,159.36914 L 748.06641,159.36914 L 750.375,155.0332 L 753.39844,155.0332"
+       id="text6099" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 171.07031,197.29102 L 175.92188,197.29102 L 175.92188,189.29883 L 173.97656,189.29883 L 171.07031,197.29102 M 165,203.63086 L 171.80859,186.36914 L 187.81641,186.36914 L 187.81641,189.36914 L 179.34375,189.36914 L 179.34375,193.04883 L 187.05469,193.04883 L 187.05469,196.00195 L 179.34375,196.00195 L 179.34375,200.44336 L 188.25,200.44336 L 188.25,203.63086 L 175.92188,203.63086 L 175.92188,200.08008 L 170.0625,200.08008 L 168.76172,203.63086 L 165,203.63086"
+       id="text6105" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 300.46875,193.23633 C 300.32031,193.22071 300.20312,193.20899 300.11719,193.20117 C 300.03906,193.19337 299.96484,193.18946 299.89453,193.18945 C 299.05859,193.18946 298.42578,193.53321 297.99609,194.2207 C 297.5664,194.90821 297.35156,195.92384 297.35156,197.26758 C 297.35156,198.04102 297.4375,198.70899 297.60938,199.27148 C 297.78906,199.83399 298.04687,200.28711 298.38281,200.63086 L 300.46875,193.23633 M 296.68359,206.49023 L 297.48047,203.63086 C 296.30859,203.13867 295.42187,202.35352 294.82031,201.27539 C 294.21875,200.19727 293.91797,198.85352 293.91797,197.24414 C 293.91797,195.11134 294.45312,193.43946 295.52344,192.22852 C 296.60156,191.01759 298.07421,190.41212 299.94141,190.41211 C 300.15234,190.41212 300.35937,190.41994 300.5625,190.43555 C 300.76562,190.45119 300.96874,190.47462 301.17188,190.50586 L 301.69922,188.56055 L 302.97656,188.56055 L 302.34375,190.78711 C 303.32811,191.09181 304.09765,191.63478 304.65234,192.41602 C 305.20702,193.18946 305.52733,194.17774 305.61328,195.38086 L 302.32031,195.36914 C 302.28124,194.98634 302.1914,194.65821 302.05078,194.38477 C 301.91796,194.10353 301.72265,193.85743 301.46484,193.64648 L 299.36719,201.13477 C 299.38281,201.13477 299.40624,201.13867 299.4375,201.14648 C 299.67187,201.16992 299.85156,201.18164 299.97656,201.18164 C 300.66406,201.18164 301.19921,200.99024 301.58203,200.60742 C 301.97265,200.22461 302.23437,199.62305 302.36719,198.80273 L 305.66016,198.80273 C 305.54296,200.41993 304.96874,201.70117 303.9375,202.64648 C 302.91405,203.5918 301.59374,204.06445 299.97656,204.06445 C 299.76562,204.06445 299.55077,204.05664 299.33203,204.04102 C 299.11328,204.02539 298.88671,204.00195 298.65234,203.9707 L 297.96094,206.49023 L 296.68359,206.49023 M 304.19531,223.0957 L 301.99219,223.0957 C 301.92968,222.54884 301.72264,222.12696 301.37109,221.83008 C 301.01952,221.5254 300.55468,221.37306 299.97656,221.37305 C 299.26562,221.37306 298.70702,221.69337 298.30078,222.33398 C 297.89452,222.96681 297.6914,223.85353 297.69141,224.99414 C 297.6914,226.14259 297.89452,227.01758 298.30078,227.61914 C 298.70702,228.22071 299.29687,228.52149 300.07031,228.52148 C 300.64061,228.52149 301.09765,228.35743 301.44141,228.0293 C 301.78514,227.70118 301.99218,227.23633 302.0625,226.63477 L 304.32422,226.62305 C 304.2617,227.70899 303.83592,228.58008 303.04688,229.23633 C 302.2578,229.89258 301.24218,230.22071 300,230.2207 C 298.54687,230.22071 297.39843,229.75977 296.55469,228.83789 C 295.71874,227.91602 295.30078,226.65821 295.30078,225.06445 C 295.30078,223.45509 295.72656,222.17384 296.57813,221.2207 C 297.43749,220.25978 298.58593,219.77931 300.02344,219.7793 C 301.21093,219.77931 302.18749,220.084 302.95313,220.69336 C 303.72655,221.30275 304.14061,222.10353 304.19531,223.0957 M 300,217.7168 C 298.99999,217.71681 298.06249,217.8965 297.1875,218.25586 C 296.32031,218.61525 295.54687,219.13869 294.86719,219.82617 C 294.17187,220.52931 293.64062,221.32618 293.27344,222.2168 C 292.90625,223.09962 292.72265,224.0254 292.72266,224.99414 C 292.72265,225.97071 292.90625,226.89649 293.27344,227.77148 C 293.64062,228.64649 294.17187,229.43164 294.86719,230.12695 C 295.55468,230.81446 296.33984,231.3418 297.22266,231.70898 C 298.10546,232.07617 299.03124,232.25977 300,232.25977 C 300.96874,232.25977 301.89452,232.07617 302.77734,231.70898 C 303.66796,231.3418 304.46874,230.80664 305.17969,230.10352 C 305.86717,229.43164 306.3867,228.66211 306.73828,227.79492 C 307.09764,226.92774 307.27733,225.99415 307.27734,224.99414 C 307.27733,224.00978 307.09373,223.08009 306.72656,222.20508 C 306.36717,221.32228 305.84373,220.53712 305.15625,219.84961 C 304.46092,219.15431 303.67577,218.62697 302.80078,218.26758 C 301.92577,217.90041 300.99218,217.71681 300,217.7168 M 299.97656,216.27539 C 301.16405,216.27541 302.28514,216.49416 303.33984,216.93164 C 304.40233,217.36916 305.35155,218.00587 306.1875,218.8418 C 307.0078,219.66212 307.63279,220.60353 308.0625,221.66602 C 308.49217,222.72071 308.70701,223.8379 308.70703,225.01758 C 308.70701,226.20509 308.49217,227.31446 308.0625,228.3457 C 307.64061,229.37696 307.01561,230.29883 306.1875,231.11133 C 305.3203,231.95508 304.35155,232.60352 303.28125,233.05664 C 302.21093,233.50195 301.10936,233.72461 299.97656,233.72461 C 298.82812,233.72461 297.73046,233.50586 296.68359,233.06836 C 295.64453,232.62305 294.70312,231.97852 293.85938,231.13477 C 293.02343,230.30664 292.38672,229.36914 291.94922,228.32227 C 291.51172,227.26758 291.29297,226.16602 291.29297,225.01758 C 291.29297,223.85353 291.51172,222.74415 291.94922,221.68945 C 292.38672,220.62697 293.02343,219.66994 293.85938,218.81836 C 294.67968,217.99025 295.60937,217.36134 296.64844,216.93164 C 297.68749,216.49416 298.79687,216.27541 299.97656,216.27539"
+       id="text6109" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 472.88672,203.63086 L 472.88672,186.36914 L 476.60156,186.36914 L 483.60938,198.22852 L 483.60938,186.36914 L 487.11328,186.36914 L 487.11328,203.63086 L 483.44531,203.63086 L 476.39063,191.77148 L 476.39063,203.63086 L 472.88672,203.63086 M 483.82031,181.0957 C 483.61717,182.07229 483.31639,182.79494 482.91797,183.26367 C 482.51952,183.72463 482.0078,183.9551 481.38281,183.95508 C 481.21874,183.9551 481.0664,183.94729 480.92578,183.93164 C 480.78515,183.90822 480.64452,183.87307 480.50391,183.82617 L 479.48438,183.52148 C 479.33593,183.48244 479.19921,183.4551 479.07422,183.43945 C 478.94921,183.41604 478.82812,183.40432 478.71094,183.4043 C 478.44531,183.40432 478.23046,183.47463 478.06641,183.61523 C 477.90234,183.75588 477.77343,183.98635 477.67969,184.30664 L 476.39063,184.30664 C 476.57812,183.36135 476.86718,182.66604 477.25781,182.2207 C 477.64843,181.77541 478.15624,181.55276 478.78125,181.55273 C 478.9453,181.55276 479.10937,181.56838 479.27344,181.59961 C 479.43749,181.62307 479.60937,181.66213 479.78906,181.7168 L 480.87891,182.00977 C 480.97265,182.04104 481.0703,182.06447 481.17188,182.08008 C 481.28124,182.09572 481.39843,182.10354 481.52344,182.10352 C 481.77343,182.10354 481.98046,182.02151 482.14453,181.85742 C 482.3164,181.68557 482.4453,181.43166 482.53125,181.0957 L 483.82031,181.0957"
+       id="text6113" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 535.83398,220.83432 L 539.2207,220.83432 L 538.33008,225.93198 C 538.21289,226.55698 538.12304,227.15073 538.06055,227.71323 C 537.99804,228.26792 537.96679,228.72104 537.9668,229.0726 C 537.96679,229.79917 538.13085,230.34214 538.45898,230.70151 C 538.7871,231.05307 539.2871,231.22885 539.95898,231.22885 C 540.74023,231.22885 541.3457,230.90854 541.77539,230.26791 C 542.21288,229.62729 542.57616,228.49058 542.86523,226.85776 L 543.91992,220.83432 L 547.30664,220.83432 L 545.04492,233.6312 L 541.9043,233.6312 L 542.11523,232.2601 C 541.7871,232.86948 541.41991,233.31479 541.01367,233.59604 C 540.61523,233.87729 540.14257,234.01791 539.5957,234.01791 C 539.07226,234.01791 538.60742,233.90073 538.20117,233.66635 C 537.79492,233.43979 537.42773,233.08432 537.09961,232.59995 L 536.04492,238.76401 L 532.69336,238.76401 L 535.83398,220.83432"
+       id="text6117" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 607.875,197.70117 C 607.74217,199.66211 606.98436,201.22071 605.60156,202.37695 C 604.22655,203.5332 602.42968,204.11133 600.21094,204.11133 C 597.65624,204.11133 595.66796,203.31445 594.24609,201.7207 C 592.83203,200.12696 592.125,197.89258 592.125,195.01758 C 592.125,192.08009 592.84765,189.83009 594.29297,188.26758 C 595.73828,186.7051 597.8164,185.92385 600.52734,185.92383 C 602.73046,185.92385 604.46874,186.46291 605.74219,187.54102 C 607.02342,188.61134 607.72655,190.12697 607.85156,192.08789 L 604.34766,192.08789 C 604.19921,191.11134 603.80077,190.36915 603.15234,189.86133 C 602.50389,189.34572 601.6289,189.08791 600.52734,189.08789 C 598.96484,189.08791 597.77734,189.59181 596.96484,190.59961 C 596.15234,191.60743 595.74609,193.08009 595.74609,195.01758 C 595.74609,196.89258 596.14843,198.3418 596.95313,199.36523 C 597.76562,200.38868 598.91796,200.90039 600.41016,200.90039 C 601.48827,200.90039 602.37108,200.62696 603.05859,200.08008 C 603.74608,199.52539 604.19139,198.73243 604.39453,197.70117 L 607.875,197.70117 M 597.62109,208.76367 L 597.62109,207.25195 C 598.24609,207.41601 598.81249,207.54101 599.32031,207.62695 C 599.82812,207.71289 600.26171,207.75586 600.62109,207.75586 C 601.02733,207.75586 601.32421,207.68554 601.51172,207.54492 C 601.69921,207.41211 601.79296,207.19726 601.79297,206.90039 C 601.79296,206.60351 601.68358,206.39258 601.46484,206.26758 C 601.24608,206.14258 600.8828,206.08008 600.375,206.08008 C 600.1953,206.08008 600.05858,206.08008 599.96484,206.08008 C 599.87108,206.08789 599.78515,206.0957 599.70703,206.10352 L 599.70703,203.63086 L 600.90234,203.63086 L 600.90234,204.68555 L 601.07813,204.68555 C 601.99218,204.68555 602.67968,204.87305 603.14063,205.24805 C 603.60155,205.62304 603.83202,206.18164 603.83203,206.92383 C 603.83202,207.70507 603.57421,208.29101 603.05859,208.68164 C 602.54296,209.07226 601.76952,209.26757 600.73828,209.26758 C 600.33983,209.26757 599.87108,209.2246 599.33203,209.13867 C 598.80077,209.05273 598.23046,208.92773 597.62109,208.76367"
+       id="text6121" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Swis721 BT"
+       d="M 721.7168,216.36914 L 721.7168,219.82617 L 718.23633,219.82617 L 718.23633,216.36914 L 721.7168,216.36914 M 721.55273,221.39648 C 721.55273,221.47462 721.55663,221.5879 721.56445,221.73633 C 721.57226,221.88478 721.57616,221.99415 721.57617,222.06445 C 721.57616,222.74415 721.50194,223.31446 721.35352,223.77539 C 721.20507,224.23634 720.96679,224.66602 720.63867,225.06445 C 720.38085,225.36134 720.00195,225.70118 719.50195,226.08398 C 719.00976,226.4668 718.69335,226.74415 718.55273,226.91602 C 718.24804,227.25977 718.0332,227.57618 717.9082,227.86523 C 717.79101,228.1543 717.73242,228.4668 717.73242,228.80273 C 717.73242,229.55274 717.93554,230.13477 718.3418,230.54883 C 718.74804,230.95508 719.32226,231.15821 720.06445,231.1582 C 720.79882,231.15821 721.38085,230.91211 721.81055,230.41992 C 722.24023,229.91993 722.4746,229.22071 722.51367,228.32227 L 725.8418,228.32227 L 725.8418,228.68555 C 725.84178,230.3418 725.31835,231.66211 724.27148,232.64648 C 723.23241,233.62305 721.83007,234.11133 720.06445,234.11133 C 718.25976,234.11133 716.82226,233.64648 715.75195,232.7168 C 714.68945,231.7793 714.1582,230.53321 714.1582,228.97852 C 714.1582,228.40821 714.2168,227.90821 714.33398,227.47852 C 714.45117,227.04883 714.63086,226.65821 714.87305,226.30664 C 715.18554,225.86915 715.67773,225.39259 716.34961,224.87695 C 717.02148,224.36134 717.43554,224.03321 717.5918,223.89258 C 717.88867,223.60353 718.0996,223.29884 718.22461,222.97852 C 718.35742,222.6504 718.42382,222.25587 718.42383,221.79492 C 718.42382,221.75587 718.41992,221.69337 718.41211,221.60742 C 718.40429,221.51368 718.40039,221.44337 718.40039,221.39648 L 721.55273,221.39648"
+       id="text6131" />
+    <path
+       style="font-size:24px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Matrix Unicode"
+       d=""
+       id="text6955" />
+  </g>
+</svg>
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG b/keyboards/s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG
new file mode 100644
index 0000000000..c730c2d65a
Binary files /dev/null and b/keyboards/s60-x/keymaps/ansi_qwertz/docs/base_layer.PNG differ
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/function_layer.PNG b/keyboards/s60-x/keymaps/ansi_qwertz/docs/function_layer.PNG
new file mode 100644
index 0000000000..fae2439cab
Binary files /dev/null and b/keyboards/s60-x/keymaps/ansi_qwertz/docs/function_layer.PNG differ
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/docs/gaming_layer.PNG b/keyboards/s60-x/keymaps/ansi_qwertz/docs/gaming_layer.PNG
new file mode 100644
index 0000000000..59b202be2b
Binary files /dev/null and b/keyboards/s60-x/keymaps/ansi_qwertz/docs/gaming_layer.PNG differ
diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
new file mode 100644
index 0000000000..050040e23c
--- /dev/null
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
@@ -0,0 +1,108 @@
+# ANSI_QWERTZ
+
+This keymap was specifically designed to support keycaps with ANSI layout and legends, while retaining the possibility of inputting characters 
+with diacritics that are normally not used in the english language.
+
+It currently relies on the US-International keyboard layout, which can be installed in any current operating system without the use of third party hardware.
+
+##Features
+
+* Input of letters with diacritics on familiar QWERTZ layout
+* Support for ANSI-legend keycaps
+* Option to "revive" all dead keys
+* SpaceFN for easy access to Function keys and diacritic input
+* Locking "Gaming Mode" that disables SpaceFN and allows to bind GUI key in Games
+* Reset key binding, no need to press hardware reset button to program
+* Microphone Mute key (requires 3rd-party software, see below)
+
+###Languages
+
+The US-International Layout is currently required for the support of non-english languages. This keymap swaps Y and Z to provide the familiar QWERTZ position for characters.
+All diacritic characters are input by either holding the Spacebar or the Fn key and pressing the corresponding key. For languages that aren't yet supported explicitly, 
+one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](#Revive-Dead-Keys).
+
+The illustration below shows the "US International" layout available in the Language settings of Windows, Linux and Mac OS.
+
+![KB_US-International](docs/KB_US-International.png)
+
+Not all languages are supported by this layout. Linux also offers the "US International Alternative" layout, 
+which contains more dead keys to input pretty much every diacritic character in a language using latin letters.
+
+![KB_US-International-Alternative](docs/KB_US-International-Alternative.png)
+
+####Explicitly Supported Languages
+
+* German
+
+####Implicitly Supported Languages
+
+This list only applys to Windows. Linux systems support all languages, see above.
+
+This list might be incomplete! Please add your language if you find it's supported.
+
+* French
+
+###SpaceFN
+
+SpaceFN basically means that Space acts as a normal spacebar when tapped, but acts as a layer-key when held down. 
+This means that you can't hold space to output multiple spaces consecutively and that space only registers once released.
+The advantage is that the spacebar is easier to reach than any other Fn-key could be.
+
+###"Gaming Mode"
+
+To alleviate the problems SpaceFN would cause when gaming, the Gaming Mode is pretty much a layer that can be turned on by pressing Fn+RShift.
+This will turn the double-role Spacebar into a normal one, so the Fn-layer (and thus function and media keys) can only be accessed with the Fn-key.
+It also turns the GUI-key (aka Win-key aka Super-key) into Right Shift, so it can be bound in Games. This is especially useful when playing with ESDF instead of WASD.
+
+###Mute Microphone
+
+The function layer has a "Mute Microphone"-key. As this is not an existing media key and you can't normally set a shortcut to this function, 
+you need to set this up in software before using it, see below. This key is bound to `Right Control` + `Left Control`, a keycombination that 
+no other program in existence uses for anything, at least to my knowledge. It also can't be pressed with this keymap in any other way.
+
+####Linux
+
+Follow [these instructions](http://askubuntu.com/a/13364).
+
+#####Windows (Requires 3rd Party Software)
+
+*DISCLAIMER: I take no responsibility for any potential harm caused by third party applications!*
+
+You'll need a utility called "MicMute". It is available on [Sourceforge](https://sourceforge.net/projects/micmute/).
+After installing and running the tool, you only need to use the "Setup Shortcut" option to bind the key to muting the microphone
+and check whether your microphone is selected under "Devices".
+
+###Revive Dead Keys
+
+Some diacritics that are commonly used are dead keys on the international layouts, for example `` ` ``,  `'`, or `"`. 
+The dead keys on the regular international layout (shown in red [here](#Languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
+If you don't want this to be the case, uncomment the following line in `keymap.c` prior to compiling:
+
+```
+//#define DONT_REVIVE_DEADKEYS 1
+```
+
+##Layers
+
+###Base Layer
+
+The base layer is shown here for ANSI keys and an HHKB-style right shift.
+Again, the Y and Z keys are swapped, so you get the QWERTZ-positions of Y and Z when using the US-International layout.
+
+![base_layer](docs/base_layer.png)
+
+###Gaming layer
+
+To turn this layer on, please use the combination Fn+RShift, not Space+Rshift. If you do the latter, the Function layer 
+
+![gaming_layer](docs/gaming_layer.png)
+
+###Function Layer
+
+This is the function layer for German diacritics. It can be accessed via the Fn-key or by holding space on the base layer.
+
+![function_layer](docs/function_layer.png)
+
+
+
+
diff --git a/keyboards/s60-x/keymaps/felix/readme.md b/keyboards/s60-x/keymaps/felix/readme.md
deleted file mode 100644
index 7f083dfd08..0000000000
--- a/keyboards/s60-x/keymaps/felix/readme.md
+++ /dev/null
@@ -1,9 +0,0 @@
-# A non-US ANSI QWERTZ keymap
-
-This keymap was specifically designed to support ANSI keycaps while retaining the possibility of inputting characters with diacritics that are normally not used in the english language.
-
-It relies on the US-International keyboard layout, which can be installed in any current operating system without the use of third party hardware.
-
-Currently, it explicitly supports the following languages, though other languages are readily useable using the AltGr modifier.
-- German
-
-- 
cgit v1.2.3


From a8659955958a0a7eb94c904469767b6cf5241ccc Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Thu, 18 Aug 2016 11:11:42 +0200
Subject: Fixed pictures and links

---
 keyboards/s60-x/keymaps/ansi_qwertz/readme.md | 28 +++++++++++++--------------
 1 file changed, 13 insertions(+), 15 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
index 050040e23c..f46c28795b 100644
--- a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
@@ -17,9 +17,9 @@ It currently relies on the US-International keyboard layout, which can be instal
 
 ###Languages
 
-The US-International Layout is currently required for the support of non-english languages. This keymap swaps Y and Z to provide the familiar QWERTZ position for characters.
-All diacritic characters are input by either holding the Spacebar or the Fn key and pressing the corresponding key. For languages that aren't yet supported explicitly, 
-one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](#Revive-Dead-Keys).
+The US-International Layout is currently required for the support of non-english languages. This keymap swaps Y and Z to provide the familiar QWERTZ position for characters when using that layout.
+All diacritic characters are input by either holding `Space` or `Fn` and pressing the corresponding key. For languages that aren't yet supported explicitly, 
+one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#Revive-Dead-Keys).
 
 The illustration below shows the "US International" layout available in the Language settings of Windows, Linux and Mac OS.
 
@@ -36,17 +36,15 @@ which contains more dead keys to input pretty much every diacritic character in
 
 ####Implicitly Supported Languages
 
-This list only applys to Windows. Linux systems support all languages, see above.
-
-This list might be incomplete! Please add your language if you find it's supported.
+This list only applies to Windows. Linux systems support all languages, see above. This list might be incomplete! Please add your language if you find it's supported.
 
 * French
 
 ###SpaceFN
 
-SpaceFN basically means that Space acts as a normal spacebar when tapped, but acts as a layer-key when held down. 
+SpaceFN basically means that `Space` acts as a normal spacebar when tapped, but acts as a layer-key when held down. 
 This means that you can't hold space to output multiple spaces consecutively and that space only registers once released.
-The advantage is that the spacebar is easier to reach than any other Fn-key could be.
+The advantage is that the spacebar is easier to reach than any other `Fn`-key could be.
 
 ###"Gaming Mode"
 
@@ -75,7 +73,7 @@ and check whether your microphone is selected under "Devices".
 ###Revive Dead Keys
 
 Some diacritics that are commonly used are dead keys on the international layouts, for example `` ` ``,  `'`, or `"`. 
-The dead keys on the regular international layout (shown in red [here](#Languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
+The dead keys on the regular international layout (shown in red [here](readme.md#Languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
 If you don't want this to be the case, uncomment the following line in `keymap.c` prior to compiling:
 
 ```
@@ -86,22 +84,22 @@ If you don't want this to be the case, uncomment the following line in `keymap.c
 
 ###Base Layer
 
-The base layer is shown here for ANSI keys and an HHKB-style right shift.
+The base layer is shown here for ANSI keysm, HHKB-style right shift and split backspace. If you use a 2U backspace key there, `Del` will not be available.
 Again, the Y and Z keys are swapped, so you get the QWERTZ-positions of Y and Z when using the US-International layout.
 
-![base_layer](docs/base_layer.png)
+![base_layer](docs/base_layer.PNG)
 
 ###Gaming layer
 
-To turn this layer on, please use the combination Fn+RShift, not Space+Rshift. If you do the latter, the Function layer 
+To turn this layer on, please use the combination `Fn+RShift`, not `Space+RShift`. If you do the latter, the Function layer will become stuck. You can press `Fn` once to unstick it if this happens to you. A solution is being worked on.
 
-![gaming_layer](docs/gaming_layer.png)
+![gaming_layer](docs/gaming_layer.PNG)
 
 ###Function Layer
 
-This is the function layer for German diacritics. It can be accessed via the Fn-key or by holding space on the base layer.
+This is the function layer for German diacritics. It can be accessed via the `Fn` or by holding `Space` on the base layer.
 
-![function_layer](docs/function_layer.png)
+![function_layer](docs/function_layer.PNG)
 
 
 
-- 
cgit v1.2.3


From c5f13e5836563dc546edea1f14ea74dc3b94fa3f Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Thu, 18 Aug 2016 11:16:10 +0200
Subject: Fixed links again

---
 keyboards/s60-x/keymaps/ansi_qwertz/readme.md | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
index f46c28795b..0938e49c81 100644
--- a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
@@ -1,5 +1,7 @@
 # ANSI_QWERTZ
 
+[Click here to go to the layers directly.](readme.md#layers)
+
 This keymap was specifically designed to support keycaps with ANSI layout and legends, while retaining the possibility of inputting characters 
 with diacritics that are normally not used in the english language.
 
@@ -19,7 +21,7 @@ It currently relies on the US-International keyboard layout, which can be instal
 
 The US-International Layout is currently required for the support of non-english languages. This keymap swaps Y and Z to provide the familiar QWERTZ position for characters when using that layout.
 All diacritic characters are input by either holding `Space` or `Fn` and pressing the corresponding key. For languages that aren't yet supported explicitly, 
-one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#Revive-Dead-Keys).
+one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#revive-dead-keys).
 
 The illustration below shows the "US International" layout available in the Language settings of Windows, Linux and Mac OS.
 
@@ -55,7 +57,7 @@ It also turns the GUI-key (aka Win-key aka Super-key) into Right Shift, so it ca
 ###Mute Microphone
 
 The function layer has a "Mute Microphone"-key. As this is not an existing media key and you can't normally set a shortcut to this function, 
-you need to set this up in software before using it, see below. This key is bound to `Right Control` + `Left Control`, a keycombination that 
+you need to set this up in software before using it, see below. This key is bound to `RCtrl+LCtrl`, a keycombination that 
 no other program in existence uses for anything, at least to my knowledge. It also can't be pressed with this keymap in any other way.
 
 ####Linux
@@ -73,7 +75,7 @@ and check whether your microphone is selected under "Devices".
 ###Revive Dead Keys
 
 Some diacritics that are commonly used are dead keys on the international layouts, for example `` ` ``,  `'`, or `"`. 
-The dead keys on the regular international layout (shown in red [here](readme.md#Languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
+The dead keys on the regular international layout (shown in red [here](readme.md#languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
 If you don't want this to be the case, uncomment the following line in `keymap.c` prior to compiling:
 
 ```
-- 
cgit v1.2.3


From 738151d12a6fe947096b974b34e70a8ab62f953c Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 18 Aug 2016 11:38:04 +0200
Subject: Minor documentation changes

---
 keyboards/s60-x/keymaps/ansi_qwertz/readme.md | 42 +++++++++------------------
 keyboards/s60-x/readme.md                     |  7 +++++
 2 files changed, 21 insertions(+), 28 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
index 0938e49c81..50651896fd 100644
--- a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
@@ -1,27 +1,26 @@
 # ANSI_QWERTZ
 
-[Click here to go to the layers directly.](readme.md#layers)
+[Click here to go to the layers directly.](readme.md#1.0-layers)
 
 This keymap was specifically designed to support keycaps with ANSI layout and legends, while retaining the possibility of inputting characters 
 with diacritics that are normally not used in the english language.
 
 It currently relies on the US-International keyboard layout, which can be installed in any current operating system without the use of third party hardware.
 
-##Features
-
+##0. Features
 * Input of letters with diacritics on familiar QWERTZ layout
 * Support for ANSI-legend keycaps
 * Option to "revive" all dead keys
+* Dedicated arrow cluster
 * SpaceFN for easy access to Function keys and diacritic input
 * Locking "Gaming Mode" that disables SpaceFN and allows to bind GUI key in Games
 * Reset key binding, no need to press hardware reset button to program
 * Microphone Mute key (requires 3rd-party software, see below)
 
-###Languages
-
+###0.0 Languages
 The US-International Layout is currently required for the support of non-english languages. This keymap swaps Y and Z to provide the familiar QWERTZ position for characters when using that layout.
 All diacritic characters are input by either holding `Space` or `Fn` and pressing the corresponding key. For languages that aren't yet supported explicitly, 
-one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#revive-dead-keys).
+one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#0.4-revive-dead-keys).
 
 The illustration below shows the "US International" layout available in the Language settings of Windows, Linux and Mac OS.
 
@@ -32,73 +31,60 @@ which contains more dead keys to input pretty much every diacritic character in
 
 ![KB_US-International-Alternative](docs/KB_US-International-Alternative.png)
 
-####Explicitly Supported Languages
-
+####0.0.0 Explicitly Supported Languages
 * German
 
-####Implicitly Supported Languages
-
+####0.0.1 Implicitly Supported Languages
 This list only applies to Windows. Linux systems support all languages, see above. This list might be incomplete! Please add your language if you find it's supported.
 
 * French
 
-###SpaceFN
-
+###0.1 SpaceFN
 SpaceFN basically means that `Space` acts as a normal spacebar when tapped, but acts as a layer-key when held down. 
 This means that you can't hold space to output multiple spaces consecutively and that space only registers once released.
 The advantage is that the spacebar is easier to reach than any other `Fn`-key could be.
 
-###"Gaming Mode"
-
+###0.2 "Gaming Mode"
 To alleviate the problems SpaceFN would cause when gaming, the Gaming Mode is pretty much a layer that can be turned on by pressing Fn+RShift.
 This will turn the double-role Spacebar into a normal one, so the Fn-layer (and thus function and media keys) can only be accessed with the Fn-key.
 It also turns the GUI-key (aka Win-key aka Super-key) into Right Shift, so it can be bound in Games. This is especially useful when playing with ESDF instead of WASD.
 
-###Mute Microphone
-
+###0.3 Mute Microphone
 The function layer has a "Mute Microphone"-key. As this is not an existing media key and you can't normally set a shortcut to this function, 
 you need to set this up in software before using it, see below. This key is bound to `RCtrl+LCtrl`, a keycombination that 
 no other program in existence uses for anything, at least to my knowledge. It also can't be pressed with this keymap in any other way.
 
-####Linux
-
+####0.3.0 Linux
 Follow [these instructions](http://askubuntu.com/a/13364).
 
-#####Windows (Requires 3rd Party Software)
-
+#####0.3.1 Windows (Requires 3rd Party Software)
 *DISCLAIMER: I take no responsibility for any potential harm caused by third party applications!*
 
 You'll need a utility called "MicMute". It is available on [Sourceforge](https://sourceforge.net/projects/micmute/).
 After installing and running the tool, you only need to use the "Setup Shortcut" option to bind the key to muting the microphone
 and check whether your microphone is selected under "Devices".
 
-###Revive Dead Keys
-
+###0.4 Revive Dead Keys
 Some diacritics that are commonly used are dead keys on the international layouts, for example `` ` ``,  `'`, or `"`. 
-The dead keys on the regular international layout (shown in red [here](readme.md#languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
+The dead keys on the regular international layout (shown in red [here](readme.md#0.1-languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
 If you don't want this to be the case, uncomment the following line in `keymap.c` prior to compiling:
-
 ```
 //#define DONT_REVIVE_DEADKEYS 1
 ```
 
 ##Layers
-
 ###Base Layer
-
 The base layer is shown here for ANSI keysm, HHKB-style right shift and split backspace. If you use a 2U backspace key there, `Del` will not be available.
 Again, the Y and Z keys are swapped, so you get the QWERTZ-positions of Y and Z when using the US-International layout.
 
 ![base_layer](docs/base_layer.PNG)
 
 ###Gaming layer
-
 To turn this layer on, please use the combination `Fn+RShift`, not `Space+RShift`. If you do the latter, the Function layer will become stuck. You can press `Fn` once to unstick it if this happens to you. A solution is being worked on.
 
 ![gaming_layer](docs/gaming_layer.PNG)
 
 ###Function Layer
-
 This is the function layer for German diacritics. It can be accessed via the `Fn` or by holding `Space` on the base layer.
 
 ![function_layer](docs/function_layer.PNG)
diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index 4bba4b68fa..0c4dc10f80 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -251,3 +251,10 @@ The custom keymap is where I tested all the switches, not being concerned with a
     ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
     │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+
+### 9. [ANSI_QWERTZ](keymap/ansi_qwertz/keymap.c)
+
+This keymap was designed for inputting characters with diacritics with ANSI keycaps. 
+It provides toggleable SpaceFn functionality, a dedicated arrow cluster and a microphone mute key on the function layer as well as a bootloader reset key.
+
+For more info, [check here](keymap/ansi_qwertz).
\ No newline at end of file
-- 
cgit v1.2.3


From d34c0a2fc1f4da162a06afa76d98e57d864da22c Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Thu, 18 Aug 2016 11:40:05 +0200
Subject: Fixed dead link

---
 keyboards/s60-x/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index 0c4dc10f80..4bf0930e70 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -257,4 +257,4 @@ The custom keymap is where I tested all the switches, not being concerned with a
 This keymap was designed for inputting characters with diacritics with ANSI keycaps. 
 It provides toggleable SpaceFn functionality, a dedicated arrow cluster and a microphone mute key on the function layer as well as a bootloader reset key.
 
-For more info, [check here](keymap/ansi_qwertz).
\ No newline at end of file
+For more info, [check here](keymap/ansi_qwertz/readme.md).
-- 
cgit v1.2.3


From aa71ebfbba49727bed275ba07d09f74917a2a6ca Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Thu, 18 Aug 2016 11:41:52 +0200
Subject: Fixed links again

Note to self: check before commiting.
---
 keyboards/s60-x/readme.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index 4bf0930e70..099d586991 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -252,9 +252,9 @@ The custom keymap is where I tested all the switches, not being concerned with a
     │Ctrl │ Gui │ Alt │█████│█████│█████│Space│█████│█████│█████│ Alt │ Gui │ App │Ctrl │█████│
     └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
 
-### 9. [ANSI_QWERTZ](keymap/ansi_qwertz/keymap.c)
+### 9. [ANSI_QWERTZ](keymaps/ansi_qwertz/keymap.c)
 
 This keymap was designed for inputting characters with diacritics with ANSI keycaps. 
 It provides toggleable SpaceFn functionality, a dedicated arrow cluster and a microphone mute key on the function layer as well as a bootloader reset key.
 
-For more info, [check here](keymap/ansi_qwertz/readme.md).
+For more info, [check here](keymaps/ansi_qwertz/readme.md).
-- 
cgit v1.2.3


From 406ae1a2eb8ee6e90c2585c522d4fbf26d94e363 Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Thu, 18 Aug 2016 11:43:32 +0200
Subject: More link fixing

---
 keyboards/s60-x/keymaps/ansi_qwertz/readme.md | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
index 50651896fd..47e4049c38 100644
--- a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
@@ -1,13 +1,13 @@
 # ANSI_QWERTZ
 
-[Click here to go to the layers directly.](readme.md#1.0-layers)
+[Click here to go to the layers directly.](readme.md#1-layers)
 
 This keymap was specifically designed to support keycaps with ANSI layout and legends, while retaining the possibility of inputting characters 
 with diacritics that are normally not used in the english language.
 
 It currently relies on the US-International keyboard layout, which can be installed in any current operating system without the use of third party hardware.
 
-##0. Features
+##0 Features
 * Input of letters with diacritics on familiar QWERTZ layout
 * Support for ANSI-legend keycaps
 * Option to "revive" all dead keys
@@ -72,19 +72,19 @@ If you don't want this to be the case, uncomment the following line in `keymap.c
 //#define DONT_REVIVE_DEADKEYS 1
 ```
 
-##Layers
-###Base Layer
+##1 Layers
+###1.0 Base Layer
 The base layer is shown here for ANSI keysm, HHKB-style right shift and split backspace. If you use a 2U backspace key there, `Del` will not be available.
 Again, the Y and Z keys are swapped, so you get the QWERTZ-positions of Y and Z when using the US-International layout.
 
 ![base_layer](docs/base_layer.PNG)
 
-###Gaming layer
+###1.1 Gaming layer
 To turn this layer on, please use the combination `Fn+RShift`, not `Space+RShift`. If you do the latter, the Function layer will become stuck. You can press `Fn` once to unstick it if this happens to you. A solution is being worked on.
 
 ![gaming_layer](docs/gaming_layer.PNG)
 
-###Function Layer
+###1.2 Function Layer
 This is the function layer for German diacritics. It can be accessed via the `Fn` or by holding `Space` on the base layer.
 
 ![function_layer](docs/function_layer.PNG)
-- 
cgit v1.2.3


From a72dc6da70923aa6f5127e719529e9631bce20f0 Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Thu, 18 Aug 2016 11:45:56 +0200
Subject: Final link fix

---
 keyboards/s60-x/keymaps/ansi_qwertz/readme.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
index 47e4049c38..2ed1af1e06 100644
--- a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
@@ -20,7 +20,7 @@ It currently relies on the US-International keyboard layout, which can be instal
 ###0.0 Languages
 The US-International Layout is currently required for the support of non-english languages. This keymap swaps Y and Z to provide the familiar QWERTZ position for characters when using that layout.
 All diacritic characters are input by either holding `Space` or `Fn` and pressing the corresponding key. For languages that aren't yet supported explicitly, 
-one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#0.4-revive-dead-keys).
+one can also use AltGr to input the characters as intended by the US-Intl layout or the dead keys, if they're kept from being [revived](readme.md#04-revive-dead-keys).
 
 The illustration below shows the "US International" layout available in the Language settings of Windows, Linux and Mac OS.
 
@@ -66,7 +66,7 @@ and check whether your microphone is selected under "Devices".
 
 ###0.4 Revive Dead Keys
 Some diacritics that are commonly used are dead keys on the international layouts, for example `` ` ``,  `'`, or `"`. 
-The dead keys on the regular international layout (shown in red [here](readme.md#0.1-languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
+The dead keys on the regular international layout (shown in red [here](readme.md#00-languages)) are revived with this keymap by automatically inserting a space if one of those characters is typed.
 If you don't want this to be the case, uncomment the following line in `keymap.c` prior to compiling:
 ```
 //#define DONT_REVIVE_DEADKEYS 1
-- 
cgit v1.2.3


From 73f13c8f26f7f3777cec9d3036628a7dd6021ee9 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 18 Aug 2016 11:56:44 +0200
Subject: Bugfixes

---
 keyboards/s60-x/keymaps/ansi_qwertz/keymap.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c b/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c
index 9f59f12fa8..317a245bef 100644
--- a/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/keymap.c
@@ -82,7 +82,7 @@ enum custom_keycodes {
 //  KC_CM_V,
     KC_CM_W,
 //  KC_CM_X,
-//  KC_CM_Y,
+    KC_CM_Y,
     KC_CM_Z
 };
 
@@ -145,7 +145,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     */
     [FUNCTION] = KEYMAP(
         KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,   RESET,   \
-        _______, _______, KC_CM_W, KC_CM_E, KC_MPRV, KC_MPLY, KC_MNXT, KC_CM_U, KC_CM_I, KC_CM_O, KC_CM_P KC_PSCR, KC_SLCK, KC_PAUS, \
+        _______, _______, KC_CM_W, KC_CM_E, KC_MPRV, KC_MPLY, KC_MNXT, KC_CM_U, KC_CM_I, KC_CM_O, KC_CM_P, KC_PSCR, KC_SLCK, KC_PAUS, \
         _______, KC_CM_A, KC_CM_S, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, KC_CM_K, KC_CM_L, _______, _______, _______, KC_PENT,          \
         _______, _______, KC_CM_Y, _______, KC_CM_C, MICMUTE, KC_CALC, KC_CM_N, KC_CM_M, _______, _______, _______, _______, KC_PGUP, KC_GMLK, \
         _______, _______, _______,                            _______,                                     _______, KC_HOME, KC_PGDN, KC_END
@@ -179,16 +179,16 @@ bool process_german(uint16_t keycode, keyrecord_t *record) {
     uint16_t send_code = 0;
     if (record->event.pressed) {
         switch (keycode) {
-        case KC_C_AM:
+        case KC_CM_A:
             send_code = KC_Q;
             break;
-        case KC_C_OM:
+        case KC_CM_O:
             send_code = KC_P;
             break;
-        case KC_C_UM:
+        case KC_CM_U:
             send_code = KC_Y;
             break;
-        case KC_C_SM:
+        case KC_CM_S:
             send_code = KC_S;
             break;
         }
@@ -204,6 +204,7 @@ bool process_german(uint16_t keycode, keyrecord_t *record) {
             return false;
         }
     }
+    return true;
 }
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-- 
cgit v1.2.3


From dbfb27326bce824ea922410ab02f9f7f54a639ba Mon Sep 17 00:00:00 2001
From: Felix Uhl <iFreilicht@users.noreply.github.com>
Date: Thu, 18 Aug 2016 12:15:10 +0200
Subject: Added info to docs

---
 keyboards/s60-x/keymaps/ansi_qwertz/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
index 2ed1af1e06..b220106121 100644
--- a/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
+++ b/keyboards/s60-x/keymaps/ansi_qwertz/readme.md
@@ -27,7 +27,7 @@ The illustration below shows the "US International" layout available in the Lang
 ![KB_US-International](docs/KB_US-International.png)
 
 Not all languages are supported by this layout. Linux also offers the "US International Alternative" layout, 
-which contains more dead keys to input pretty much every diacritic character in a language using latin letters.
+which contains more dead keys to input pretty much every diacritic character in a language using latin letters. More information can be found [here](http://web.archive.org/web/20160818101234/http://dry.sailingissues.com/us-international-keyboard-layout.html).
 
 ![KB_US-International-Alternative](docs/KB_US-International-Alternative.png)
 
-- 
cgit v1.2.3


From 387bd772e1a6f24be2239b910979c0a309425400 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 13:06:16 +0200
Subject: initial commit for the AMJ60 PCB

---
 keyboards/amj60/Makefile                           |  70 ++++++++++
 keyboards/amj60/amj60.c                            |  30 ++++
 keyboards/amj60/amj60.h                            | 153 +++++++++++++++++++++
 keyboards/amj60/config.h                           |  94 +++++++++++++
 keyboards/amj60/keymaps/iso_split_rshift/Makefile  |  23 ++++
 keyboards/amj60/keymaps/iso_split_rshift/build.sh  |  42 ++++++
 keyboards/amj60/keymaps/iso_split_rshift/keymap.c  | 147 ++++++++++++++++++++
 .../amj60/keymaps/iso_split_rshift/updatemerge.sh  |   4 +
 8 files changed, 563 insertions(+)
 create mode 100644 keyboards/amj60/Makefile
 create mode 100644 keyboards/amj60/amj60.c
 create mode 100644 keyboards/amj60/amj60.h
 create mode 100644 keyboards/amj60/config.h
 create mode 100644 keyboards/amj60/keymaps/iso_split_rshift/Makefile
 create mode 100755 keyboards/amj60/keymaps/iso_split_rshift/build.sh
 create mode 100644 keyboards/amj60/keymaps/iso_split_rshift/keymap.c
 create mode 100755 keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh

(limited to 'keyboards')

diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile
new file mode 100644
index 0000000000..1f695aa4d8
--- /dev/null
+++ b/keyboards/amj60/Makefile
@@ -0,0 +1,70 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= yes # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      ?= no  # MIDI controls
+AUDIO_ENABLE     ?= no
+UNICODE_ENABLE   ?= no  # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
diff --git a/keyboards/amj60/amj60.c b/keyboards/amj60/amj60.c
new file mode 100644
index 0000000000..993a5917db
--- /dev/null
+++ b/keyboards/amj60/amj60.c
@@ -0,0 +1,30 @@
+#include "amj60.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
+}
diff --git a/keyboards/amj60/amj60.h b/keyboards/amj60/amj60.h
new file mode 100644
index 0000000000..f966a2ba01
--- /dev/null
+++ b/keyboards/amj60/amj60.h
@@ -0,0 +1,153 @@
+#ifndef AMJ60_H
+#define AMJ60_H
+
+#include "quantum.h"
+
+// readability  
+#define XXX KC_NO
+
+/* AMJ60 layout to the best of my knowledge matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49|
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3c | 3d |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+}
+
+/* 
+   * ANSI
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c|   0d  |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|   3d     |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+
+/* AMJ60 HHKB matrix layout
+   * ,------------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
+   * |------------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d  |
+   * |------------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b|   2d   |
+   * |------------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d   | 3c |
+   * |------------------------------------------------------------|
+   * | 40 | 41 | 42 |        45              | 4a | 4b | 4c | 4d  |
+   * `------------------------------------------------------------'
+ */
+
+#define KEYMAP_HHKB( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+}
+
+/* ISO 
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|   3d     |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+/* ISO w/ split right shift key matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d  | 3c |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO_SPLITRSHIFT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h
new file mode 100644
index 0000000000..d98e0e9f2f
--- /dev/null
+++ b/keyboards/amj60/config.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6066
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Han Chen
+#define PRODUCT         AMJ60
+#define DESCRIPTION     qmk port of AMJ60 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5}
+#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/Makefile b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
new file mode 100644
index 0000000000..0d8416bbce
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/build.sh b/keyboards/amj60/keymaps/iso_split_rshift/build.sh
new file mode 100755
index 0000000000..6b4b4568f5
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/build.sh
@@ -0,0 +1,42 @@
+#!/bin/bash
+# adjust for cpu 
+# -j 16 gave best result on a hyperthreaded quad core core i7
+
+LIMIT=10
+THREADS="-j 16"
+KMAP=iso_split_rshift
+
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+
+function wait_bootloader {
+	echo "Waiting for Bootloader..."
+	local STARTTIME=$(date +"%s")
+	local REMIND=0
+    local EXEC=dfu-programmer
+    local TARGET=atmega32u4
+	while true
+	do
+		sudo $EXEC $TARGET get > /dev/null 2>&1
+		[ $? -eq 0 ] && break
+		ENDTIME=$(date +"%s")
+		DURATION=$(($ENDTIME-$STARTTIME))
+		if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
+		then 
+			echo "Did you forget to press the reset button?"
+			REMIND=1
+		fi
+        sleep 1
+	done
+}
+make clean
+make KEYMAP=${KMAP} ${THREADS}
+if [[ $? -eq 0 ]]
+then
+    echo "please trigger flashing!"
+    wait_bootloader
+    sudo make KEYMAP=${KMAP} dfu ${THREADS}
+else
+    echo "make failed"
+    exit 77
+fi
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/keymap.c b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c
new file mode 100644
index 0000000000..60fb0bfb0b
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c
@@ -0,0 +1,147 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "amj60.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DEF 0
+#define _SPC 1
+#define _TAB 2
+#define _SFX 3
+
+// dual-role shortcuts
+#define TABDUAL   LT(_TAB, KC_TAB)
+#define CAPSDUAL  CTL_T(KC_ESC)
+#define SPACEDUAL LT(_SPC, KC_SPACE)
+#define ENTERDUAL CTL_T(KC_ENT)
+// arrow cluster duality bottom right corner
+#define ARRLEFT  ALT_T(KC_LEFT)
+#define ARRDOWN  GUI_T(KC_DOWN)
+#define ARRUP    SFT_T(KC_UP)
+#define ARRRIGHT CTL_T(KC_RIGHT)
+// german brackets
+#define GER_CUR_L RALT(KC_7)    // [
+#define GER_CUR_R RALT(KC_0)    // ]
+#define GER_PAR_L LSFT(KC_8)    // (
+#define GER_PAR_R LSFT(KC_9)    // )
+#define GER_ANG_L KC_NUBS       // <
+#define GER_ANG_R LSFT(KC_NUBS) // >
+#define GER_BRC_L RALT(KC_8)    // [
+#define GER_BRC_R RALT(KC_9)    // ]
+
+// increase readability 
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _DEF: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Grv|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   \ | Tab is Fn1
+     * |-----------------------------------------------------------|
+     * |Ctrl   | A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
+     * |-----------------------------------------------------------|
+     * |Sft | < |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2| RShift is UP
+     * |-----------------------------------------------------------|
+     * |Ctrl|Win |Alt |      Space/Fn0         |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is 
+     * `-----------------------------------------------------------'   LEFT DWN RIGHT
+     */
+    [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_GRV,   KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,   \
+        TABDUAL,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,   \
+        CAPSDUAL, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,  ENTERDUAL, \
+        KC_LSFT,  KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, ARRUP,    TG(_SFX),  \
+        KC_LCTL,  KC_LGUI, KC_LALT,             SPACEDUAL,                       KC_RALT, ARRLEFT, ARRDOWN,  ARRRIGHT),
+
+    /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
+     * ,-----------------------------------------------------------.
+     * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
+     * |-----------------------------------------------------------|
+     * |    |Paus| Up| [ | ] |   |   |   | ( | ) |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |Lft|Dwn|Rgt|   |   |Left|Down|Right|Up|  |   | PLAY |
+     * |-----------------------------------------------------------|
+     * |    |   |   |   | < | > |   |M0 |   |   |   |   | Vol+ |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Prev|Vol-|Next|
+     * `-----------------------------------------------------------'
+     */
+    [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_PSCR, KC_F1,   KC_F2,   KC_F3,     KC_F4,     KC_F5,     KC_F6,    KC_F7,     KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+        _______, KC_PAUS, KC_UP,   GER_BRC_L, GER_BRC_R, _______,   _______,  GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \
+        _______, KC_LEFT, KC_DOWN, KC_RIGHT,  _______,   _______,   KC_LEFT,  KC_DOWN,   KC_UP,     KC_RGHT, _______, _______, _______, KC_MPLY, \
+        _______, _______, _______, _______,   GER_ANG_L, GER_ANG_R, KC_SPACE, M(0),      _______,   _______, _______, _______, KC_VOLU, _______, \
+        _______, _______, _______,                                  _______,                                 _______, KC_MPRV, KC_VOLD, KC_MNXT),
+
+    /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
+     * ,-----------------------------------------------------------.
+     * |WAKE|   |   |   |   |   |   |   |   |   |   |   |   |Insert|  TAB+GRC = WAKE
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   |   | { | } |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |   |   |   |   |   |Pos1|PgDn|PgUp|End|  |   |Retrn |
+     * |-----------------------------------------------------------|
+     * |    |   |   |   |   |   |   |AF2|   |   |   |   | PgUp |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Pos1|PgDn|End |
+     * `-----------------------------------------------------------'
+     */
+    [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_WAKE, _______, _______, _______, _______, _______, _______, _______,    _______,  _______, _______, _______, _______, KC_INS,  \
+        _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,    KC_PGUP,  KC_END,  _______, _______, _______, KC_ENT,  \
+        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,  _______, _______, _______, KC_PGUP, _______, \
+        _______, _______, _______,                            _______,                                _______, KC_HOME, KC_PGDN, KC_END),
+
+    /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
+     * ,-----------------------------------------------------------.
+     * |RSET|  |   |   |   |   |   |  7|  8|  9|   |   |   |Backsp |
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   | 4 | 5 | 6 |   |   |   |   \ |
+     * |-----------------------------------------------------------|
+     * |      | L | L |   |   |   |   | 1 | 2 | 3 |   |   | Return |
+     * |-----------------------------------------------------------|
+     * |    |   | L | L | L | L | L | L |   | 0 |   |  /|  Up  |   | All "L"s represent
+     * |-----------------------------------------------------------| LED controlling
+     * |Ctrl|Win |Alt |                        |Alt |Left|Down|Right|
+     * `-----------------------------------------------------------'
+     */
+    [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
+        RESET,   _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9, _______, _______, _______, KC_BSPC, \
+        _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6, _______, _______, _______, KC_BSLS, \
+        _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, XXXXXXX, KC_ENT,  \
+        _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, KC_UP,   _______, \
+        _______, _______, _______,                            _______,                         _______, KC_LEFT, KC_DOWN, KC_RGHT),
+};
+
+enum function_id {
+    LAUNCH,
+    RGBLED_TOGGLE,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1]  = ACTION_FUNCTION(LAUNCH),
+    [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+    switch(id) {
+        case 0:
+            return (record->event.pressed ? 
+                    MACRO( D(RALT), T(SPC), U(RALT), END )
+                    :MACRO( END ));
+            break;
+        case 1:
+            return (record->event.pressed ? 
+                    MACRO( D(LALT), T(F2), U(LALT), END )
+                    :MACRO( END ));
+            break;
+    }
+    return MACRO_NONE;
+};
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh
new file mode 100755
index 0000000000..da5457e195
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+git checkout amj60      # gets you on branch amj60
+git fetch origin        # gets you up to date with origin
+git merge origin/master
-- 
cgit v1.2.3


From 068e76bbf048236aa4b48adefe979024b39b6a65 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 13:10:02 +0200
Subject: uniform whitespace

---
 keyboards/amj60/amj60.h | 90 ++++++++++++++++++++++++-------------------------
 1 file changed, 45 insertions(+), 45 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/amj60/amj60.h b/keyboards/amj60/amj60.h
index f966a2ba01..a0cb473310 100644
--- a/keyboards/amj60/amj60.h
+++ b/keyboards/amj60/amj60.h
@@ -21,17 +21,17 @@
  */
 #define KEYMAP( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
-	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
-	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
 }
 
 /* 
@@ -50,17 +50,17 @@
  */
 #define KEYMAP_ANSI( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
-	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
-	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
-	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
 
 /* AMJ60 HHKB matrix layout
@@ -79,17 +79,17 @@
 
 #define KEYMAP_HHKB( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
-	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
-	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
-	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
 }
 
 /* ISO 
@@ -107,17 +107,17 @@
  */
 #define KEYMAP_ISO( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
-	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
-	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
 /* ISO w/ split right shift key matrix layout
    * ,-----------------------------------------------------------.
@@ -134,17 +134,17 @@
  */
 #define KEYMAP_ISO_SPLITRSHIFT( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
-	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
-	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
-	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
 
 void matrix_init_user(void);
-- 
cgit v1.2.3


From 0d9d4b8658e27f54188bfd9952b43b384f53a257 Mon Sep 17 00:00:00 2001
From: Gergely Nagy <algernon@madhouse-project.org>
Date: Thu, 18 Aug 2016 13:20:25 +0200
Subject: planck/circuit: Update after the latest tap-dance change

Fixes #653.

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
---
 keyboards/planck/keymaps/circuit/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/circuit/keymap.c b/keyboards/planck/keymaps/circuit/keymap.c
index 5096decb9b..63e01f389a 100644
--- a/keyboards/planck/keymaps/circuit/keymap.c
+++ b/keyboards/planck/keymaps/circuit/keymap.c
@@ -43,7 +43,7 @@ enum planck_keycodes {
 
 // Tap Dance Definitions
 #ifdef TAP_DANCE_ENABLE
-const qk_tap_dance_action_t tap_dance_actions[] = {
+qk_tap_dance_action_t tap_dance_actions[] = {
 	[0]  = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
 };
 #endif
-- 
cgit v1.2.3


From 0edf7c7cad356e85cae2d91b8811216006f0be14 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 15:22:34 +0200
Subject: first attempt at documentation for the amj60 board

---
 keyboards/amj60/readme.md | 57 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 keyboards/amj60/readme.md

(limited to 'keyboards')

diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md
new file mode 100644
index 0000000000..6c9c634b19
--- /dev/null
+++ b/keyboards/amj60/readme.md
@@ -0,0 +1,57 @@
+AMJ60 keyboard firmware
+======================
+DIY/Assembled compact 60% keyboard.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/amj60
+folder. Once your dev env is setup, you'll be able to type `make` to generate
+your .hex - you can then use `make dfu` to program your PCB once you hit the
+reset button. 
+
+Depending on which keymap you would like to use, you will have to compile
+slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to
+define your favorite layout yourself. To define your own keymap create file
+named `<name>.c` in the keymaps folder, and see keymap document (you can find
+in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with
+`KEYMAP` option like:
+``
+$ make KEYMAP=[default|jack|<name>]
+``
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps`
+folder.
+
+## Variations
+KEYMAP macros for the following layouts are available:
+
+* default, for all the available, possible keys
+* ANSI, for 60% ANSI keyboard
+* ISO
+* ISO w/ split right shift key
+* HHKB
+
+Remark: all but "ISO w/ split tight shift key" are untested and were done to the best of my knowledge.
+
+### Original tmk firmware
+The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60).
+
+## Further information
+Since information and documentation for this board are sparse, (at least for non-chinese speaking ppl) here is everything that could be found
+
+* [geekhack discussion](https://geekhack.org/index.php?topic=53070.0)
+* [chinese discussion](https://www.v2ex.com/t/161887)
+* Board has [dedicated pinouts](https://i.imgur.com/D0sWhyh.jpg?1) for a bluetooth module
+* has pins for external power [picture](https://i.imgur.com/00VrtIp.jpg?1).
+* most information comes from [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/32oonr/gh60_pcb_for_your_custom_keyboard/)
-- 
cgit v1.2.3


From 0e86c852412030eaba16b2eaab65a6827d150119 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 15:30:52 +0200
Subject: amj60 variant of the readme

---
 keyboards/amj60/keymaps/iso_split_rshift/readme.md | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 keyboards/amj60/keymaps/iso_split_rshift/readme.md

(limited to 'keyboards')

diff --git a/keyboards/amj60/keymaps/iso_split_rshift/readme.md b/keyboards/amj60/keymaps/iso_split_rshift/readme.md
new file mode 100644
index 0000000000..2113d93e4d
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/readme.md
@@ -0,0 +1,30 @@
+toneman77's custom spacefn Layout
+=====================
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+# Features
+* heavily modified ISO (!) layout with split right shift key
+* spaceFn
+* Dual-Role keys:
+* 
+ | Original key     | when tapped   | when held     |
+ | ---------------- | ------------- | ------------- |
+ | Space            | Space         | layer change  |
+ | Caps lock        | Escape        | Control       |
+ | Tab              | Tab           | layer change  |
+ | Enter            | Enter         | Control       |
+
+* vim-style arrow keys on hjkl (spacefn layer)
+* corresponding Home/PgDn/PgUp/End on hjkl (tab layer)
+* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift
+* more bonus arrow keys on wasd (spacefn layer)
+* media keys prev/next/play/vol+/vol- (spacefn layer)
+* firmware bootloader button
+* additional brackets that only work in german layout due to horrible placement
+in the default qwertz layout
+
+
+### Additional Credits
+* visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) (without the LED keys)
-- 
cgit v1.2.3


From fe906538861c5ee30a75d6f955e611dd38d93977 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 15:32:06 +0200
Subject: smyll typo fixed

---
 keyboards/amj60/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md
index 6c9c634b19..0896134e0c 100644
--- a/keyboards/amj60/readme.md
+++ b/keyboards/amj60/readme.md
@@ -42,7 +42,7 @@ KEYMAP macros for the following layouts are available:
 * ISO w/ split right shift key
 * HHKB
 
-Remark: all but "ISO w/ split tight shift key" are untested and were done to the best of my knowledge.
+Remark: all but "ISO w/ split right shift key" are untested and were done to the best of my knowledge.
 
 ### Original tmk firmware
 The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60).
-- 
cgit v1.2.3


From 21dc8381d1d428f7b0f6eb4ebe5c6536e3bd2b57 Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Thu, 18 Aug 2016 15:57:17 +0200
Subject: made a correct default KEYMAP. moved the old one to KEYMAP_ANSI fixed
 all layouts that were referencing KEYMAP to KEYMAP_ANSI whitespace
 prettyfying

---
 keyboards/satan/keymaps/default/keymap.c    |  4 +--
 keyboards/satan/keymaps/denolfe/keymap.c    | 36 +++++++++++-----------
 keyboards/satan/keymaps/poker/keymap.c      | 46 ++++++++++++++---------------
 keyboards/satan/keymaps/stanleylai/keymap.c | 22 +++++++-------
 keyboards/satan/satan.h                     | 37 +++++++++++++++++++----
 5 files changed, 86 insertions(+), 59 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/satan/keymaps/default/keymap.c b/keyboards/satan/keymaps/default/keymap.c
index 3806137e78..2bf49d2e65 100644
--- a/keyboards/satan/keymaps/default/keymap.c
+++ b/keyboards/satan/keymaps/default/keymap.c
@@ -27,7 +27,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Gui |Alt |      Space            |Alt |Gui |FN  |Ctrl |
    * `-----------------------------------------------------------'
    */
-[_BL] = KEYMAP(
+[_BL] = KEYMAP_ANSI(
   F(0),    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, \
   KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS, \
   KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,  \
@@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |    |    |    |                        |    |    |    |    |
    * `-----------------------------------------------------------'
    */
-[_FL] = KEYMAP(
+[_FL] = KEYMAP_ANSI(
   #ifdef RGBLIGHT_ENABLE
   KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,  \
   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \
diff --git a/keyboards/satan/keymaps/denolfe/keymap.c b/keyboards/satan/keymaps/denolfe/keymap.c
index 2f6c8d8f4f..5f189d78a3 100644
--- a/keyboards/satan/keymaps/denolfe/keymap.c
+++ b/keyboards/satan/keymaps/denolfe/keymap.c
@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Gui |Alt |      Space            |Alt |Gui |FN  |Ctrl |
    * `-----------------------------------------------------------'
    */
-[_BL] = KEYMAP(
+[_BL] = KEYMAP_ANSI(
   F(0),      KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,     KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_BSPC, \
   KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,     KC_O,    KC_P,    KC_LBRC,  KC_RBRC,  KC_BSLS, \
   MO(_FL),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,     KC_L,    KC_SCLN, KC_QUOT,            KC_ENT,  \
@@ -49,27 +49,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |    |    |    |                        |    |    |    |    |
    * `-----------------------------------------------------------'
    */
-[_FL] = KEYMAP(
+[_FL] = KEYMAP_ANSI(
   #ifdef RGBLIGHT_ENABLE
-  KC_GRV, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  \
-  KC_TRNS,KC_TRNS,KC_TRNS,  KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,   KC_TRNS,   BL_DEC,   BL_INC,   BL_TOGG, \
-  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,              KC_TRNS, \
-  KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_INC,  BL_TOGG, \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, \
+  KC_TRNS, F(1),    F(2),    F(3),    F(4),    F(5),    F(6),    F(7),     F(8),    KC_TRNS, KC_TRNS,                   KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
   #else
-  KC_GRV,   KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,          KC_F8,        KC_F9,          KC_F10,   KC_F11,  KC_F12,     KC_DEL,   \
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PGDN,        KC_PGUP,      KC_TRNS,        KC_END,   KC_MPRV, KC_MNXT,    KC_MPLY, \
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_LEFT,  KC_DOWN,        KC_UP,        KC_RIGHT,       KC_TRNS,           KC_TRNS,    KC_TRNS, \
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  BL_DEC,    BL_TOGG,  BL_INC,   KC_HOME,  LCTL(KC_LEFT),  LCTL(KC_END), LCTL(KC_RIGHT), KC_TRNS,                       RESET, \
-  KC_TRNS,  KC_TRNS,  F(9),          KC_TRNS,                                                          KC_TRNS,        KC_TRNS,           KC_TRNS,    KC_TRNS),
+  KC_GRV,   KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,          KC_F8,        KC_F9,          KC_F10,   KC_F11,  KC_F12,  KC_DEL,  \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PGDN,        KC_PGUP,      KC_TRNS,        KC_END,   KC_MPRV, KC_MNXT, KC_MPLY, \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_LEFT,  KC_DOWN,        KC_UP,        KC_RIGHT,       KC_TRNS,  KC_TRNS,          KC_TRNS, \
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  BL_DEC,    BL_TOGG,  BL_INC,   KC_HOME,  LCTL(KC_LEFT),  LCTL(KC_END), LCTL(KC_RIGHT), KC_TRNS,                    RESET,   \
+  KC_TRNS,  KC_TRNS,  F(9),                                    KC_TRNS,                                                KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS),
   #endif
 
-[_SL] = KEYMAP(
-  KC_GRV,   KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,     KC_F10,   KC_F11,    KC_F12,  KC_DEL,   \
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PGDN,  KC_PGUP,  KC_TRNS,   LSFT(KC_END),   KC_MPRV,     KC_MNXT,    KC_MPLY, \
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,  LSFT(KC_LEFT),  LSFT(KC_DOWN),  LSFT(KC_UP),    LSFT(KC_RIGHT),  KC_TRNS,  KC_TRNS,  KC_TRNS, \
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  BL_DEC,    BL_TOGG,  BL_INC,  LSFT(KC_HOME),  LCTL(LSFT(KC_LEFT)),  LCTL(LSFT(KC_END)), LCTL(LSFT(KC_RIGHT)),   KC_TRNS,                        RESET, \
-  KC_TRNS,  KC_TRNS,  KC_TRNS,             KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+[_SL] = KEYMAP_ANSI(
+  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,         KC_F7,               KC_F8,              KC_F9,                KC_F10,       KC_F11,  KC_F12,  KC_DEL,  \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_PGDN,             KC_PGUP,            KC_TRNS,              LSFT(KC_END), KC_MPRV, KC_MNXT, KC_MPLY, \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_LEFT), LSFT(KC_DOWN),       LSFT(KC_UP),        LSFT(KC_RIGHT),       KC_TRNS,      KC_TRNS,          KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  LSFT(KC_HOME), LCTL(LSFT(KC_LEFT)), LCTL(LSFT(KC_END)), LCTL(LSFT(KC_RIGHT)), KC_TRNS,                        RESET,   \
+  KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                                                      KC_TRNS,      KC_TRNS, KC_TRNS, KC_TRNS),
 };
 
 enum function_id {
diff --git a/keyboards/satan/keymaps/poker/keymap.c b/keyboards/satan/keymaps/poker/keymap.c
index 8181955cf9..9da7d29b78 100644
--- a/keyboards/satan/keymaps/poker/keymap.c
+++ b/keyboards/satan/keymaps/poker/keymap.c
@@ -25,12 +25,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Gui |Alt |      Space            |Alt |Gui |FN  |Ctrl |
    * `-----------------------------------------------------------'
    */
-[_BL] = KEYMAP(
-  F(0),    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,  KC_EQL,   KC_BSPC, \
-  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,  KC_RBRC,  KC_BSLS, \
-  KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,            KC_ENT,  \
-  KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,            KC_RSFT, \
-  KC_LCTL, KC_LGUI,KC_LALT,          KC_SPC,                                        KC_RALT,  MO(_RL), MO(_FL),  KC_RCTL),
+[_BL] = KEYMAP_ANSI(
+  F(0),    KC_1,    KC_2,    KC_3,   KC_4,    KC_5,    KC_6,    KC_7,     KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,    KC_Y,    KC_U,     KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,    KC_H,    KC_J,     KC_K,    KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,  \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,    KC_B,    KC_N,    KC_M,     KC_COMM, KC_DOT, KC_SLSH,                   KC_RSFT, \
+  KC_LCTL, KC_LGUI, KC_LALT,                           KC_SPC,                             KC_RALT, MO(_RL), MO(_FL), KC_RCTL),
 
 /* Keymap _FL: Function Layer
    * ,-----------------------------------------------------------.
@@ -45,12 +45,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |    |    |    |                        |    |    |    |    |
    * `-----------------------------------------------------------'
    */
-[_FL] = KEYMAP(
-  KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,  \
-  KC_TRNS,KC_TRNS, KC_UP,  KC_TRNS,KC_TRNS,KC_TRNS, KC_CALC,KC_TRNS,KC_INS, KC_TRNS, KC_PSCR,  KC_SLCK,   KC_PAUS,   KC_TRNS, \
-  KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_HOME,    KC_PGUP,              KC_TRNS, \
-  KC_TRNS, KC_TRNS,  KC_APP,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_VOLD,  KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \
-  KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+[_FL] = KEYMAP_ANSI(
+  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+  KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS,  KC_INS,  KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \
+  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP,          KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_APP,  KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU,  KC_MUTE, KC_END,  KC_PGDN,                   KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
   
   /* Keymap _RL: Function Layer
    * ,-----------------------------------------------------------.
@@ -65,19 +65,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |    |    |    |                        |    |    |    |    |
    * `-----------------------------------------------------------'   
    */
-[_RL] = KEYMAP(
+[_RL] = KEYMAP_ANSI(
   #ifdef RGBLIGHT_ENABLE
-  KC_GRV, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  \
-  KC_TRNS,KC_TRNS,KC_TRNS,  KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,   KC_TRNS,   BL_DEC,   BL_INC,   BL_TOGG, \
-  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,              KC_TRNS, \
-  KC_TRNS, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_INC,  BL_TOGG, \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, \
+  KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS,                   KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
   #else
-  KC_GRV, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  \
-  KC_TRNS,KC_TRNS,KC_TRNS,  KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,   KC_TRNS,   BL_DEC,   BL_INC,   BL_TOGG, \
-  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,              KC_TRNS, \
-  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_INC,  BL_TOGG, \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
   #endif
 };
 
diff --git a/keyboards/satan/keymaps/stanleylai/keymap.c b/keyboards/satan/keymaps/stanleylai/keymap.c
index 623427e97c..979c122e55 100644
--- a/keyboards/satan/keymaps/stanleylai/keymap.c
+++ b/keyboards/satan/keymaps/stanleylai/keymap.c
@@ -26,25 +26,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 // Function layer
 [_FL] = KEYMAP_HHKB(
-  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_NO, \
-  KC_NO,   KC_MPRV, KC_UP,   KC_MNXT, KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \
-  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,            KC_NO,  \
-  KC_TRNS,          KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   LT(_RGBL, KC_PGUP), KC_TRNS,  \
-  KC_TRNS, KC_TRNS, KC_TRNS,                           KC_MPLY,                                 KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,  KC_F11,  KC_F12,   KC_DEL,   KC_NO,   \
+  KC_NO,   KC_MPRV, KC_UP,   KC_MNXT, KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_PSCR, KC_SLCK, KC_PAUS,  KC_INS,            \
+  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,             KC_NO,             \
+  KC_TRNS,          KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   LT(_RGBL, KC_PGUP), KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS,                           KC_MPLY,                                 KC_TRNS, KC_HOME,  KC_PGDN,  KC_END),
 
 // RGB Layer
 [_RGBL] = KEYMAP_HHKB(
   #ifdef RGBLIGHT_ENABLE
   RESET,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO, KC_NO, \
-  KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO, \
-  KC_NO,   BL_TOGG, BL_STEP, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,    KC_NO,   KC_NO,            KC_NO,  \
-  KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD,  KC_NO,   KC_NO,   KC_TRNS, KC_TRNS,\
+  KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,        \
+  KC_NO,   BL_TOGG, BL_STEP, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,    KC_NO,   KC_NO,            KC_NO,        \
+  KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD,  KC_NO,   KC_NO,   KC_TRNS, KC_TRNS,      \
   KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
   #else
   RESET,   KC_NO,   KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_NO,   KC_NO, KC_NO, \
-  KC_NO,   KC_NO,   KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_NO,   KC_NO, \
-  KC_NO,   BL_TOGG, BL_STEP, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,            KC_NO,  \
-  KC_TRNS,          KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_TRNS, KC_TRNS,\
+  KC_NO,   KC_NO,   KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_NO,   KC_NO,        \
+  KC_NO,   BL_TOGG, BL_STEP, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,            KC_NO,        \
+  KC_TRNS,          KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_TRNS, KC_TRNS,      \
   KC_TRNS, KC_TRNS, KC_TRNS,                         KC_TRNS,                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
   #endif
 };
diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h
index 33a10292c4..f3cbd5305e 100644
--- a/keyboards/satan/satan.h
+++ b/keyboards/satan/satan.h
@@ -6,15 +6,15 @@
 // readability
 #define XXX KC_NO
 
-/* Satan GH60 matrix layout
+/* Satan GH60 matrix layout (3c is right of 3d, 3d is shift)
    * ,-----------------------------------------------------------.
-   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49|
    * |-----------------------------------------------------------|
    * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
    * |-----------------------------------------------------------|
-   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
    * |-----------------------------------------------------------|
-   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3d      |
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3d | 3c |
    * |-----------------------------------------------------------|
    * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
    * `-----------------------------------------------------------'
@@ -22,10 +22,37 @@
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 #define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+}
+/* Satan GH60 ANSI layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|    3d    |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ANSI( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
 	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
-	k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,           k3d, \
+	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
 	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
 ) \
 { \
-- 
cgit v1.2.3


From a5e6da7aa8173bb4cac8569d01b64ea2839474af Mon Sep 17 00:00:00 2001
From: Damien <Dbroqua@users.noreply.github.com>
Date: Thu, 18 Aug 2016 22:25:13 +0200
Subject: Added dbroqua layout for planck keyboard

---
 keyboards/planck/keymaps/dbroqua/keymap.c | 314 ++++++++++++++++++++++++++++++
 1 file changed, 314 insertions(+)
 create mode 100644 keyboards/planck/keymaps/dbroqua/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
new file mode 100644
index 0000000000..775f1d56fa
--- /dev/null
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -0,0 +1,314 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+#include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _ADJUST 16
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |      | Alt  |Lower |    Space    |Raise |AltGr |   [  |   ]  |  \   |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {KC_LCTL, KC_LGUI, _______, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_RALT, KC_LBRC, KC_RBRC,   KC_BSLS}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      | Home | PgDwn| PgUp |  End |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |Insert|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      |      |      |      |             |      |      |      |      | Del  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
+  {_______,_______,_______,_______,_______,_______,KC_HOME,KC_PGDN,KC_PGUP,KC_END,_______,_______},
+  {_______, _______,   _______,   _______,   _______,  _______,  _______,_______,_______,_______, _______, KC_INS},
+  {BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |  10  |   -  |   =  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      | Left | Down |  Up  | Right|      |  `   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |Insert|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Play | Next | Del  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_1,  KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,    KC_EQL},
+  {_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, KC_GRV},
+  {_______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, _______, _______, _______, KC_INS},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_DEL}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |TogOut|   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_NOTE_ARRAY(tone_plover, false, 0);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
-- 
cgit v1.2.3


From ed1291bfbddc19c410e9c6d7bc4775b638b3e316 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Thu, 18 Aug 2016 22:43:31 -0700
Subject: Added compatibility for the Infinity ErgoDox to my Ergodox keymap.
 Updated readme.md to reflect this change.

---
 keyboards/ergodox/keymaps/xyverz/keymap.c  | 225 ++++++++++++++++++++++-------
 keyboards/ergodox/keymaps/xyverz/readme.md |   6 +-
 2 files changed, 178 insertions(+), 53 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
index 7a16367bfa..397c8566f5 100644
--- a/keyboards/ergodox/keymaps/xyverz/keymap.c
+++ b/keyboards/ergodox/keymaps/xyverz/keymap.c
@@ -1,7 +1,7 @@
 /*
- * PLEASE NOTE: This keymap will NOT work with the Infinity ErgoDox due to the fact that the mappings are
- * based on the Matrix Layout in the ez.h file. If you want to use this for the infinity, you'll need to 
- * figure out where the keys are in the matrix and redo the layout arrays below.
+ * PLEASE NOTE: This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity,
+ * simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file is untested
+ * on the Infinity ErgoDox.
  * 
  * About this keymap:
  * 
@@ -38,6 +38,11 @@ extern keymap_config_t keymap_config;
 #define QWERTY M(_QW)
 #define COLEMAK M(_CM)
 
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_DV] = {  // layer 0 : Dvorak
@@ -62,24 +67,48 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  *
  */
+#ifdef SUBPROJECT_infinity // Infinity Ergodox
+	// left hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME},
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END },
+	{KC_6,    MO(_KP), XXXXXXX, MO(_MD), KC_DEL },
+	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_BSPC},
+	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT},
+	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT},
+	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS },
+	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV },
+	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI},
+
+	//Right Hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP},
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN},
+	{KC_ESC,  MO(_MD), XXXXXXX, MO(_KP), KC_ENT },
+	{KC_6,    KC_F,    KC_D,    KC_B,    KC_SPC },
+	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP  },
+	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN},
+	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH},
+	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL },
+	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI}
+#else // Ergodox and Ergodox EZ 
         // left hand
-	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX},
 	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV,  KC_END },
 	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS,  KC_DEL },
 	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT, KC_BSPC},
 	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT, KC_HOME},
-	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_NO,   KC_LCTL},
-	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+	{KC_5,    KC_Y,    KC_I,    KC_X,    XXXXXXX, KC_LCTL},
+	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT},
 
 	// right hand
-	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
-	{KC_6,    KC_F,    KC_D,    KC_B,    KC_NO,   KC_RCTL},
+	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT},
+	{KC_6,    KC_F,    KC_D,    KC_B,    XXXXXXX, KC_RCTL},
 	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP,   KC_PGUP},
 	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN, KC_SPC },
 	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH, KC_ENT },
 	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL,  KC_PGDN},
-	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO  }
-},
+	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, XXXXXXX}
+#endif
+  },
 
 
 [_QW] = {  // layer 1 : QWERTY
@@ -103,23 +132,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      | End  |       | PgDn |      |      |
  *                                 `--------------------'       `--------------------'
  */
+#ifdef SUBPROJECT_infinity // Infinity Ergodox
+	// left hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME},
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END },
+	{KC_6,    MO(_KP), XXXXXXX, MO(_MD), KC_DEL },
+	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_BSPC},
+	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT},
+	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT},
+	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS },
+	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV },
+	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI},
+
+	//Right Hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP},
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN},
+	{KC_ESC,  MO(_MD), XXXXXXX, MO(_KP), KC_ENT },
+	{KC_6,    KC_F,    KC_D,    KC_B,    KC_SPC },
+	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP  },
+	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN},
+	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH},
+	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL },
+	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI}
+#else // Ergodox and Ergodox EZ 
         // left hand
-	{KC_EQL,  KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_EQL,  KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX},
 	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
 	{KC_2,    KC_W,    KC_S,    KC_X,    KC_INS,  KC_DEL },
 	{KC_3,    KC_E,    KC_D,    KC_C,    KC_LEFT, KC_BSPC},
 	{KC_4,    KC_R,    KC_F,    KC_V,    KC_RGHT, KC_HOME},
-	{KC_5,    KC_T,    KC_G,    KC_B,    KC_NO,   KC_LCTL},
-	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+	{KC_5,    KC_T,    KC_G,    KC_B,    XXXXXXX, KC_LCTL},
+	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT},
 
 	// right hand
-	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
-	{KC_6,    KC_Y,    KC_H,    KC_N,    KC_NO,   KC_RCTL},
+	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT},
+	{KC_6,    KC_Y,    KC_H,    KC_N,    XXXXXXX, KC_RCTL},
 	{KC_7,    KC_U,    KC_J,    KC_M,    KC_UP,   KC_PGUP},
 	{KC_8,    KC_I,    KC_K,    KC_COMM, KC_DOWN, KC_SPC },
 	{KC_9,    KC_O,    KC_L,    KC_DOT,  KC_LBRC, KC_ENT },
 	{KC_0,    KC_P,    KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN},
-	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX}
+#endif
   },
 
 
@@ -144,23 +197,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      | End  |       | PgDn |      |      |
  *                                 `--------------------'       `--------------------'
  */
+#ifdef SUBPROJECT_infinity // Infinity Ergodox
+	// left hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME},
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END },
+	{KC_6,    MO(_KP), XXXXXXX, MO(_MD), KC_DEL },
+	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_BSPC},
+	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT},
+	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT},
+	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS },
+	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV },
+	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI},
+
+	//Right Hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP},
+	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN},
+	{KC_ESC,  MO(_MD), XXXXXXX, MO(_KP), KC_ENT },
+	{KC_6,    KC_F,    KC_D,    KC_B,    KC_SPC },
+	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP  },
+	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN},
+	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH},
+	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL },
+	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI}
+#else // Ergodox and Ergodox EZ 
         // left hand
-	{KC_EQL,  KC_TAB,  KC_BSPC, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_EQL,  KC_TAB,  KC_BSPC, KC_LSFT, KC_LGUI, XXXXXXX},
 	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
 	{KC_2,    KC_W,    KC_R,    KC_X,    KC_INS,  KC_DEL },
 	{KC_3,    KC_F,    KC_S,    KC_C,    KC_LEFT, KC_BSPC},
 	{KC_4,    KC_P,    KC_T,    KC_V,    KC_RGHT, KC_HOME},
-	{KC_5,    KC_G,    KC_D,    KC_B,    KC_NO,   KC_LCTL},
-	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+	{KC_5,    KC_G,    KC_D,    KC_B,    XXXXXXX, KC_LCTL},
+	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT},
 
 	// right hand
-	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
-	{KC_6,    KC_J,    KC_H,    KC_K,    KC_NO,   KC_RCTL},
+	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT},
+	{KC_6,    KC_J,    KC_H,    KC_K,    XXXXXXX, KC_RCTL},
 	{KC_7,    KC_L,    KC_N,    KC_M,    KC_UP,   KC_PGUP},
 	{KC_8,    KC_U,    KC_E,    KC_COMM, KC_DOWN, KC_SPC },
 	{KC_9,    KC_Y,    KC_I,    KC_DOT,  KC_LBRC, KC_ENT },
 	{KC_0,    KC_SCLN, KC_O,    KC_SLSH, KC_RBRC, KC_PGDN},
-	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX}
+#endif
   },
 
 
@@ -185,23 +262,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      |      |       |      |      |      |
  *                                 `--------------------'       `--------------------'
  */
+#ifdef SUBPROJECT_infinity // Infinity Ergodox
+	// left hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{KC_F11,  _______, XXXXXXX, _______, _______},
+	{KC_F5,   _______, _______, _______, _______},
+	{KC_F4,   KC_PAUS, _______, COLEMAK, _______},
+	{KC_F3,   KC_SLCK, _______, QWERTY,  _______},
+	{KC_F2,   KC_PSCR, _______, DVORAK,  _______},
+	{KC_F1,   _______, _______, _______, _______},
+	{RESET,   _______, _______, _______, _______},
+
+	//Right Hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{KC_F12,  _______, XXXXXXX, _______, _______},
+	{KC_F6,   _______, KC_MSTP, _______, _______},
+	{KC_F7,   KC_VOLU, KC_MPRV, _______, _______},
+	{KC_F8,   KC_VOLD, KC_MPLY, _______, _______},
+	{KC_F9,   KC_MUTE, KC_MNXT, _______, _______},
+	{KC_F10,  _______, KC_MSEL, _______, _______},
+	{_______, _______, _______, _______, _______},
+#else // Ergodox and Ergodox EZ 
         // left hand
-	{RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  },
-	{KC_F1,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_F2,   KC_PSCR, KC_TRNS, DVORAK,  KC_TRNS, KC_TRNS},
-	{KC_F3,   KC_SLCK, KC_TRNS, QWERTY,  KC_TRNS, KC_TRNS},
-	{KC_F4,   KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS},
-	{KC_F5,   KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
-	{KC_F11,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{RESET,   _______, _______, _______, _______, XXXXXXX},
+	{KC_F1,   _______, _______, _______, _______, _______},
+	{KC_F2,   KC_PSCR, _______, DVORAK,  _______, _______},
+	{KC_F3,   KC_SLCK, _______, QWERTY,  _______, _______},
+	{KC_F4,   KC_PAUS, _______, COLEMAK, _______, _______},
+	{KC_F5,   _______, _______, _______, XXXXXXX, _______},
+	{KC_F11,  XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
 
 	// right hand
-	{KC_F12,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
-	{KC_F6,   KC_TRNS, KC_MSTP, KC_TRNS, KC_NO,   KC_TRNS},
-	{KC_F7,   KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_F8,   KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_F9,   KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_F10,  KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  }
+	{KC_F12,  XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
+	{KC_F6,   _______, KC_MSTP, _______, XXXXXXX, _______},
+	{KC_F7,   KC_MUTE, KC_MPRV, _______, _______, _______},
+	{KC_F8,   KC_VOLD, KC_MPLY, _______, _______, _______},
+	{KC_F9,   KC_VOLU, KC_MNXT, _______, _______, _______},
+	{KC_F10,  _______, KC_MSEL, _______, _______, _______},
+	{_______, _______, _______, _______, _______, XXXXXXX}
+#endif
   },
 
 
@@ -226,23 +327,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |      |      |       |      |      |      |
  *                                 `--------------------'       `--------------------'
  */
+#ifdef SUBPROJECT_infinity // Infinity Ergodox
+	// left hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{_______, _______, XXXXXXX, _______, _______},
+	{_______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______},
+	{KC_PWR,  KC_SLEP, KC_WAKE, _______, _______},
+
+	//Right Hand
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
+	{_______, _______, XXXXXXX, _______, _______},
+	{_______, _______, KC_MSTP, _______, _______},
+	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0  },
+	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   _______},
+	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT},
+	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT},
+	{_______, _______, _______, _______, _______},
+#else // Ergodox and Ergodox EZ 
         // left hand
-	{KC_PWR,  KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO  },
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
-	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_PWR,  KC_SLEP, KC_WAKE, _______, _______, XXXXXXX},
+	{_______, _______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, _______, _______},
+	{_______, _______, _______, _______, XXXXXXX, _______},
+	{_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
 
 	// right hand
-	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
-	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0,   KC_TRNS},
-	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   KC_NO,   KC_TRNS},
-	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT, KC_TRNS},
-	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS},
-	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_NO  }
+	{_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
+	{_______, _______, _______, _______, XXXXXXX, _______},
+	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0,   _______},
+	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   XXXXXXX, _______},
+	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT, _______},
+	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, _______},
+	{_______, _______, _______, _______, XXXXXXX, XXXXXXX}
+#endif
   },
 
 
diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index 2557493239..e6cb582c5c 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -2,7 +2,7 @@
 
 ## Please Note:
 
-This keymap will probably **not** work with the Infinity ErgoDox. It will need **substantial** modification in order to work on the Infinity. This is due to the fact that the mappings are based on the matrix positions in the keymap definition in the ez.h file. If you want to use this for the infinity, you'll need to figure out where the keys are in the matrix and redo the layout arrays below.
+This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity, simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file builds cleanly as is but as of this writing has not been tested on the Infinity ErgoDox. YMMV.
 
 ## About this keymap:
 
@@ -12,7 +12,7 @@ The QWERTY layout shown here is based entirely on the Kinesis Advantage layout,
 
 I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts.
 
-For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined, beginning on line 81.
+For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined beginning on line 81, or in ../../infinity/infinity.h beginning at line 72.
 
 ### Layer 0: Dvorak layer
 
@@ -119,4 +119,4 @@ For a better explanation of the layout matrices shown below, take a look at ../.
 	                              |      |      |      ||      |      |      |
 	                              |      |      |------||------|      |      |
 	                              |      |      |      ||      |      |      |
-	                              `--------------------'`--------------------'
\ No newline at end of file
+	                              `--------------------'`--------------------'
-- 
cgit v1.2.3


From 578b7e969ea93f1f07ea2dde9c986101e97a9e2d Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Fri, 19 Aug 2016 09:19:55 +0200
Subject: - Updated dbroqua layout for planck keyboard

---
 keyboards/planck/keymaps/dbroqua/keymap.c | 314 ++++++++++++++++++++++++++++++
 1 file changed, 314 insertions(+)
 create mode 100644 keyboards/planck/keymaps/dbroqua/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
new file mode 100644
index 0000000000..e183582cfd
--- /dev/null
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -0,0 +1,314 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _ADJUST 16
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Lower| Raise|  Alt |    Space    |AltGr | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_S,    KC_D,   KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {KC_LCTL, KC_LGUI, LOWER,   RAISE,  KC_LALT, KC_SPC,  KC_SPC,  KC_RALT, KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      | Home | PgDwn| PgUp |  End |   [  |   ]  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |   \  |Insert|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite|      |      |      |      |             |      |      |      |      | Del  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_F1,   KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10, KC_F11,   KC_F12},
+  {_______, _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END, KC_LBRC,  KC_RBRC},
+  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,KC_BSLS,  KC_INS},
+  {BACKLIT, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,_______,  KC_DEL}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |  10  |   -  |   =  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      | Left | Down |  Up  | Right|      |  `   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |Insert|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Play | Next | Del  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL},
+  {_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT, _______, KC_GRV},
+  {_______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, _______, _______, _______, KC_INS},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_DEL}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |TogOut|   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_NOTE_ARRAY(tone_plover, false, 0);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
\ No newline at end of file
-- 
cgit v1.2.3


From 31120ed16690ff784d8ddc40a11b2fa5ebe9e717 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Fri, 19 Aug 2016 09:39:25 +0200
Subject: - Moved Brite function on esc to avoid conflict with ctrl key.

---
 keyboards/planck/keymaps/dbroqua/keymap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
index e183582cfd..70bac391b0 100644
--- a/keyboards/planck/keymaps/dbroqua/keymap.c
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -97,18 +97,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |      |      |      | Home | PgDwn| PgUp |  End |   [  |   ]  |
+ * | Brite|      |      |      |      |      | Home | PgDwn| PgUp |  End |   [  |   ]  |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |   \  |Insert|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite|      |      |      |      |             |      |      |      |      | Del  |
+ * |      |      |      |      |      |             |      |      |      |      | Del  |
  * `-----------------------------------------------------------------------------------'
  */
 [_LOWER] = {
   {KC_F1,   KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10, KC_F11,   KC_F12},
-  {_______, _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END, KC_LBRC,  KC_RBRC},
+  {BACKLIT, _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END, KC_LBRC,  KC_RBRC},
   {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,KC_BSLS,  KC_INS},
-  {BACKLIT, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,_______,  KC_DEL}
+  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,_______,  KC_DEL}
 },
 
 /* Raise
-- 
cgit v1.2.3


From bc0bd11430d09423208d5df17dec21e64854cb9a Mon Sep 17 00:00:00 2001
From: Toni <jeder@mail1a.de>
Date: Fri, 19 Aug 2016 10:24:48 +0200
Subject: forgot media keys

---
 keyboards/amj60/keymaps/iso_split_rshift/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/amj60/keymaps/iso_split_rshift/Makefile b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
index 0d8416bbce..2969ed8aec 100644
--- a/keyboards/amj60/keymaps/iso_split_rshift/Makefile
+++ b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
@@ -4,7 +4,7 @@
 #
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
 CONSOLE_ENABLE   = no  # Console for debug(+400)
 COMMAND_ENABLE   = yes # Commands for debug and configuration
 NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-- 
cgit v1.2.3


From b4f23b146f05aac1def181a3f4dd4fb0479d15e8 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Fri, 19 Aug 2016 14:01:37 +0200
Subject: - Moved Home/End/PgUp/PgDn on arrow keys

---
 keyboards/planck/keymaps/dbroqua/keymap.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
index 70bac391b0..a0517ced7d 100644
--- a/keyboards/planck/keymaps/dbroqua/keymap.c
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -97,25 +97,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Brite|      |      |      |      |      | Home | PgDwn| PgUp |  End |   [  |   ]  |
+ * | Brite|      |      |      |      |      |      |      |      |      |   [  |   ]  |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |   \  |Insert|
+ * |      |      |      |      |      |      |      |      |      |      |   \  |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      | Del  |
+ * |      |      |      |      |      |             |      | Home | PgDwn| PgUp | End  |
  * `-----------------------------------------------------------------------------------'
  */
 [_LOWER] = {
-  {KC_F1,   KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10, KC_F11,   KC_F12},
-  {BACKLIT, _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END, KC_LBRC,  KC_RBRC},
-  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,KC_BSLS,  KC_INS},
-  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,_______,  KC_DEL}
+  {KC_F1,   KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,     KC_F11,   KC_F12},
+  {BACKLIT, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_LBRC,  KC_RBRC},
+  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_BSLS,  _______},
+  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_PGDN,    KC_PGUP,  KC_END}
 },
 
 /* Raise
  * ,-----------------------------------------------------------------------------------.
  * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |  10  |   -  |   =  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |      |      |      | Left | Down |  Up  | Right|      |  `   |
+ * |      |      |      |      |      |      |      |      |      |      |      |  `   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |Insert|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -124,7 +124,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_RAISE] = {
   {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL},
-  {_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT, _______, KC_GRV},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV},
   {_______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, _______, _______, _______, KC_INS},
   {_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_DEL}
 },
-- 
cgit v1.2.3


From c6e733afce48871c1787912c08c6eb6a44f13291 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Fri, 19 Aug 2016 14:17:07 +0200
Subject: - Added readme file and layout preview

---
 keyboards/planck/keymaps/dbroqua/layout.png | Bin 0 -> 21465 bytes
 keyboards/planck/keymaps/dbroqua/readme.md  |  11 +++++++++++
 2 files changed, 11 insertions(+)
 create mode 100644 keyboards/planck/keymaps/dbroqua/layout.png
 create mode 100644 keyboards/planck/keymaps/dbroqua/readme.md

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/layout.png b/keyboards/planck/keymaps/dbroqua/layout.png
new file mode 100644
index 0000000000..bab28a7c7c
Binary files /dev/null and b/keyboards/planck/keymaps/dbroqua/layout.png differ
diff --git a/keyboards/planck/keymaps/dbroqua/readme.md b/keyboards/planck/keymaps/dbroqua/readme.md
new file mode 100644
index 0000000000..b3b64c325f
--- /dev/null
+++ b/keyboards/planck/keymaps/dbroqua/readme.md
@@ -0,0 +1,11 @@
+# Dbroqua Layout
+
+![Layout](layout.png "Dbroqua Keymap")
+
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/e77306f9d14cc93fa26123b93b106474
+
+# Programming Instructions:
+Enter into programming mode and run the following command.
+```
+$ sudo KEYMAP=dbroqua make dfu
+```
-- 
cgit v1.2.3


From 11aa19a6264c3ca3151143db4b790db89791beee Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Fri, 19 Aug 2016 21:00:24 +0200
Subject: - Updated lower and raise layer

---
 keyboards/planck/keymaps/dbroqua/keymap.c   | 172 ++++++++--------------------
 keyboards/planck/keymaps/dbroqua/layout.png | Bin 21465 -> 20569 bytes
 2 files changed, 46 insertions(+), 126 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
index a0517ced7d..56d4cf22dd 100644
--- a/keyboards/planck/keymaps/dbroqua/keymap.c
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -15,36 +15,38 @@ extern keymap_config_t keymap_config;
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
 #define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _PLOVER 5
-#define _ADJUST 16
+#define _LOWER 1
+#define _RAISE 2
+#define _ESC 3
+#define _ADJUST 4
 
 enum planck_keycodes {
   QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  PLOVER,
   LOWER,
   RAISE,
-  BACKLIT,
-  EXT_PLV
+  BACKLIT
 };
 
 // Fillers to make layering more clear
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
 
+// Func macro definitions.
+#define SFT_ESC  FUNC(0) // Tap for Enter, hold for Shift
+
+// Enable these functions using FUNC(n) macro.
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(_ESC, KC_ESC)
+ };
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Qwerty
  * ,-----------------------------------------------------------------------------------.
  * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Ctrl | GUI  | Lower| Raise|  Alt |    Space    |AltGr | Left | Down |  Up  |Right |
@@ -52,108 +54,72 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_QWERTY] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-  {KC_ESC,  KC_A,    KC_S,    KC_D,   KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {SFT_ESC,  KC_A,    KC_S,    KC_D,   KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
   {KC_LCTL, KC_LGUI, LOWER,   RAISE,  KC_LALT, KC_SPC,  KC_SPC,  KC_RALT, KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT}
 },
 
-/* Colemak
+/* Lower
  * ,-----------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |      |      |      |      |      |      |      |      |      |      |   (  |   )  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_COLEMAK] = {
-  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
-  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
-  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
-},
-
-/* Dvorak
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * | Brite|      |      |      |      |      |      |      |      |      |   {  |   }  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_DVORAK] = {
-  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
-  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
-  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
-  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
-},
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Brite|      |      |      |      |      |      |      |      |      |   [  |   ]  |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |   \  |      |
+ * |      |      |      |      |      |      |      |      |      |      |   [  |   ]  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Home | PgDwn| PgUp | End  |
  * `-----------------------------------------------------------------------------------'
  */
 [_LOWER] = {
-  {KC_F1,   KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,     KC_F11,   KC_F12},
-  {BACKLIT, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_LBRC,  KC_RBRC},
-  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_BSLS,  _______},
+  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_LPRN,  KC_RPRN},
+  {BACKLIT, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_LCBR,  KC_RCBR},
+  {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_LBRC,  KC_RBRC},
   {_______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_PGDN,    KC_PGUP,  KC_END}
 },
 
 /* Raise
  * ,-----------------------------------------------------------------------------------.
  * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |  10  |   -  |   =  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |      |  `   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |Insert|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Prev | Play | Next | Del  |
+ * |      |      |      |      |      |      |      |      |      |      |   \  |Insert|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      | Del  |
  * `-----------------------------------------------------------------------------------'
  */
 [_RAISE] = {
   {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV},
-  {_______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, _______, _______, _______, KC_INS},
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_DEL}
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSLS, KC_INS},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}
 },
 
-/* Plover layer (http://opensteno.org)
+/* Esc
  * ,-----------------------------------------------------------------------------------.
- * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |TogOut|   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Play | Next |      |
  * `-----------------------------------------------------------------------------------'
  */
-
-[_PLOVER] = {
-  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
-  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
-  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
-  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+[_ESC] = {
+  {KC_F1,   KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,     KC_F12},
+  {_______, _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______},
+  {_______, _______,    _______,    _______,    _______,    KC_MUTE,    KC_VOLU,    KC_VOLD,    _______,    _______,    _______,    KC_INS},
+  {_______, _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_MPRV,    KC_MPLY,    KC_MNXT,    KC_DEL}
 },
 
+
 /* Adjust (Lower + Raise)
  * ,-----------------------------------------------------------------------------------.
  * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      |      |      |      |      |
@@ -161,7 +127,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_ADJUST] = {
   {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
-  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______, _______, _______, _______},
   {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 }
@@ -199,24 +165,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-        #endif
-        persistant_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-        #endif
-        persistant_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
     case LOWER:
       if (record->event.pressed) {
         layer_on(_LOWER);
@@ -248,34 +196,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-    case PLOVER:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          stop_all_notes();
-          PLAY_NOTE_ARRAY(tone_plover, false, 0);
-        #endif
-        layer_off(_RAISE);
-        layer_off(_LOWER);
-        layer_off(_ADJUST);
-        layer_on(_PLOVER);
-        if (!eeconfig_is_enabled()) {
-            eeconfig_init();
-        }
-        keymap_config.raw = eeconfig_read_keymap();
-        keymap_config.nkro = 1;
-        eeconfig_update_keymap(keymap_config.raw);
-      }
-      return false;
-      break;
-    case EXT_PLV:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
-        #endif
-        layer_off(_PLOVER);
-      }
-      return false;
-      break;
   }
   return true;
 }
diff --git a/keyboards/planck/keymaps/dbroqua/layout.png b/keyboards/planck/keymaps/dbroqua/layout.png
index bab28a7c7c..d8aaf6fa64 100644
Binary files a/keyboards/planck/keymaps/dbroqua/layout.png and b/keyboards/planck/keymaps/dbroqua/layout.png differ
-- 
cgit v1.2.3


From b9a284352e9066127f00bc2b992c6cbd7757f6f3 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Fri, 19 Aug 2016 21:10:07 +0200
Subject: - Moved Insert/Del in Esc layer

---
 keyboards/planck/keymaps/dbroqua/keymap.c   |  12 ++++++------
 keyboards/planck/keymaps/dbroqua/layout.png | Bin 20569 -> 20479 bytes
 keyboards/planck/keymaps/dbroqua/readme.md  |   2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
index 56d4cf22dd..3d89ff1d34 100644
--- a/keyboards/planck/keymaps/dbroqua/keymap.c
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -83,16 +83,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |      |  `   |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |   \  |Insert|
+ * |      |      |      |      |      |      |      |      |      |      |   \  |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      | Del  |
+ * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
 [_RAISE] = {
   {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSLS, KC_INS},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSLS, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 },
 
 /* Esc
@@ -101,9 +101,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |      |
+ * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |Insert|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Prev | Play | Next |      |
+ * |      |      |      |      |      |             |      | Prev | Play | Next |  Del |
  * `-----------------------------------------------------------------------------------'
  */
 [_ESC] = {
diff --git a/keyboards/planck/keymaps/dbroqua/layout.png b/keyboards/planck/keymaps/dbroqua/layout.png
index d8aaf6fa64..0deafefe27 100644
Binary files a/keyboards/planck/keymaps/dbroqua/layout.png and b/keyboards/planck/keymaps/dbroqua/layout.png differ
diff --git a/keyboards/planck/keymaps/dbroqua/readme.md b/keyboards/planck/keymaps/dbroqua/readme.md
index b3b64c325f..b5cdb9f65d 100644
--- a/keyboards/planck/keymaps/dbroqua/readme.md
+++ b/keyboards/planck/keymaps/dbroqua/readme.md
@@ -8,4 +8,4 @@
 Enter into programming mode and run the following command.
 ```
 $ sudo KEYMAP=dbroqua make dfu
-```
+```
\ No newline at end of file
-- 
cgit v1.2.3


From a1da23d827df80de1771dc7277dbba803507dabf Mon Sep 17 00:00:00 2001
From: zs <baloghzsof@gmail.com>
Date: Fri, 19 Aug 2016 21:59:08 +0200
Subject: Add the workman-dead layout for kc60

---
 keyboards/kc60/keymaps/workman-dead/README.md      |  17 ++
 .../kc60/keymaps/workman-dead/kc60-wm-dead.png     | Bin 0 -> 117155 bytes
 keyboards/kc60/keymaps/workman-dead/keymap.c       | 183 +++++++++++++++++++++
 3 files changed, 200 insertions(+)
 create mode 100644 keyboards/kc60/keymaps/workman-dead/README.md
 create mode 100644 keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png
 create mode 100644 keyboards/kc60/keymaps/workman-dead/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/kc60/keymaps/workman-dead/README.md b/keyboards/kc60/keymaps/workman-dead/README.md
new file mode 100644
index 0000000000..f1fcdc9606
--- /dev/null
+++ b/keyboards/kc60/keymaps/workman-dead/README.md
@@ -0,0 +1,17 @@
+# Workman dead with spacefn (kc60 @ QMK)
+
+## Layout reference
+![workman dead with spacefn](./kc60-wm-dead.png)
+
+## Build
+
+To build this keymap, simply run `make KEYMAP=workman-dead`.
+
+## Notes
+
+* the default layout is `workman` (try it out, it's awesome!), but it can be changed to `qwerty` with the `rebel` key (the function layer won't change though)
+* `comma` acts as a dead key, that means tapping/holding it will activate the **oneshot** `dead key` layer (marked red in the reference)
+* hold `space` to access the `function` layer (marked blue in the reference)
+* hold `tab` to activate the mouse layer
+* the `function` layer contains mostly osx specific shortcuts
+* on the right side of the bottom row `alt` and `super` are switched compared to a standard layout
diff --git a/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png
new file mode 100644
index 0000000000..cc6a630a59
Binary files /dev/null and b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png differ
diff --git a/keyboards/kc60/keymaps/workman-dead/keymap.c b/keyboards/kc60/keymaps/workman-dead/keymap.c
new file mode 100644
index 0000000000..103adeef61
--- /dev/null
+++ b/keyboards/kc60/keymaps/workman-dead/keymap.c
@@ -0,0 +1,183 @@
+#include "kc60.h"
+
+#define _WM 0
+#define _QW 1
+#define _DK 2
+#define _FUN 3
+#define _MS 4
+
+#define _______ KC_NO
+#define XXXXXXX KC_TRNS
+
+#define _DK_ACT 0
+#define _DK_REL 1
+#define _KC_COMS 2
+#define _KC_CENT 3
+
+#define DK_ACT  M(_DK_ACT)       // activate dead key layer
+#define DK_REL  M(_DK_REL)       // release dead key layer
+#define KC_COMS M(_KC_COMS)      // comma + space
+#define KC_CENT M(_KC_CENT)      // comma + enter
+#define KC_TABM LT(_MS, KC_TAB)  // press for tab, hold for mouse layer
+#define KC_SPFN LT(_FUN, KC_SPC) // press for space, hold for function layer (aka spacefn)
+#define KC_DFQW DF(_QW)          // set default layer to qwerty
+#define KC_DFWM DF(_WM)          // set default layer to workman
+#define KC_CMDQ LGUI(KC_Q)       // command + q
+#define KC_CMDD LGUI(KC_D)       // command + d
+#define KC_CMDA LGUI(KC_A)       // command + a
+#define KC_CMDS LGUI(KC_S)       // command + s
+#define KC_CMDZ LGUI(KC_Z)       // command + z
+#define KC_CMDX LGUI(KC_X)       // command + x
+#define KC_CMDC LGUI(KC_C)       // command + c
+#define KC_CMDV LGUI(KC_V)       // command + v
+#define KC_CSTB S(RCTL(KC_TAB))  // shift + control + tab
+#define KC_C_TB RCTL(KC_TAB)     // control + tab
+#define KC_C_LF RCTL(KC_LEFT)    // control + left
+#define KC_C_RT RCTL(KC_RGHT)    // control + right
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Workman
+/*
+* ,-----------------------------------------------------------.
+* |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| Bsp   |
+* |-----------------------------------------------------------|
+* |Tab/M|  Q|  D|  R|  W|  B|  J|  F|  U|  P|  ;|  [|  ]|  \  |
+* |-----------------------------------------------------------|
+* |Ctrl  |  A|  S|  H|  T|  G|  Y|  N|  E|  O|  I|  '| Return |
+* |-----------------------------------------------------------|
+* |Shift   |  Z|  X|  M|  C|  V|  K|  L|  ,|  .|  /| Shift    |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |  Space/FN   | Alt | GUI | Ctrl | qwerty |
+* `-----------------------------------------------------------'
+*/
+[_WM] = KEYMAP( /* Workman */
+  KC_ESC,           KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+  KC_TABM,          KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_LCTL,          KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    KC_QUOT, _______, KC_ENT,  \
+  KC_LSFT, _______, KC_Z,    KC_X,    KC_M,    KC_C,    KC_V,    KC_K,    KC_L,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,                   KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW),
+
+// QWERTY
+/*
+* ,-----------------------------------------------------------.
+* |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| Bsp   |
+* |-----------------------------------------------------------|
+* |Tab/M|  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+* |-----------------------------------------------------------|
+* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
+* |-----------------------------------------------------------|
+* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Shift    |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |  Space/FN  | Alt | GUI | Ctrl | workman |
+* `-----------------------------------------------------------'
+*/
+[_QW] = KEYMAP( /* QWERTY */
+  KC_ESC,           KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+  KC_TABM,          KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, _______, KC_ENT,  \
+  KC_LSFT, _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,                   KC_RALT, KC_RGUI, KC_RCTL, KC_DOWN),
+
+// dead key layer
+/*
+* ,-----------------------------------------------------------.
+* |    |  |   |   |   |   |   |   |   |   |   |   |   | Bsp   |
+* |-----------------------------------------------------------|
+* |     |  %|  &|  ?|  +|  @|  $|  _|  [|  ]|  !|   ~|  ^|    |
+* |-----------------------------------------------------------|
+* |      |  #|  (|  =|  0|  {|  }|  1|  *|  )|  -|  `| Return |
+* |-----------------------------------------------------------|
+* |        |  6|  7|  8|  9|  ||  \|  2|  3|  4|  5|          |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |       ,       | Alt | GUI | Ctrl |      |
+* `-----------------------------------------------------------'
+*/
+[_DK] = KEYMAP( /* dead key layer */
+  XXXXXXX,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, \
+  XXXXXXX,          KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT,   KC_DLR,  KC_UNDS, KC_LBRC, KC_RBRC, KC_EXLM, KC_TILD, KC_CIRC, _______, \
+  _______,          KC_HASH, KC_LPRN, KC_EQL,  KC_0,    KC_LCBR, KC_RCBR, KC_1,    KC_ASTR, KC_RPRN, KC_MINS, KC_GRV,  _______, KC_CENT, \
+  _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_PIPE, KC_BSLS, KC_2,    DK_REL,  KC_4,    KC_5,             _______, _______, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_COMS,                   KC_RALT, KC_RGUI, KC_RCTL, _______),
+
+// function layer
+/*
+* ,-----------------------------------------------------------.
+* |   | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|Del |
+* |-----------------------------------------------------------|
+* |Esc  | Cq| Cd|cstb|ctb|   |   |pgd| up|pgu|   |   |   |ins |
+* |-----------------------------------------------------------|
+* |Shift | Ca| Cs|clt|crt|   |   | lt| dw| rt|home|end| Bsp   |
+* |-----------------------------------------------------------|
+* |Shift  | Cz|  Cx|   | Cc| Cv| V-| V+|mute|   |   |         |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |              | Alt | GUI | Ctrl | Reset |
+* `-----------------------------------------------------------'
+*/
+[_FUN] = KEYMAP( /* function layer */
+  KC_TRNS,          KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+  KC_ESC,           KC_CMDQ, KC_CMDD, KC_CSTB, KC_C_TB, _______, _______, KC_PGDN, KC_UP,   KC_PGUP, _______, _______, _______, KC_INS,  \
+  KC_LSFT,          KC_CMDA, KC_CMDS, KC_C_LF, KC_C_RT, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_END,  _______, KC_BSPC, \
+  KC_LSFT, _______, KC_CMDZ, KC_CMDX, _______, KC_CMDC, KC_CMDV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______,          _______, _______, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_TRNS,                   KC_RALT, KC_RGUI, KC_RCTL, RESET),
+
+// mouse layer
+/*
+* ,-----------------------------------------------------------.
+* |    |  |   |   |   |   |   |   |   |   |   |   |   |       |
+* |-----------------------------------------------------------|
+* |    |fast|med|slow|   |   |   |   | up|   |   |   |   |    |
+* |-----------------------------------------------------------|
+* |      |   |   |   |   |   |   | lt| dw| rt| rc|   |        |
+* |-----------------------------------------------------------|
+* |        |   |   |   |   |   |   |   |   |   |   |          |
+* |-----------------------------------------------------------|
+* |     |     |     |      lc       |     |     |      |      |
+* `-----------------------------------------------------------'
+*/
+[_MS] = KEYMAP( /* mouse layer */
+  XXXXXXX,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  XXXXXXX,          KC_ACL2, KC_ACL1, KC_ACL0, _______, _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, \
+  _______,          _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN2, _______, _______, _______, \
+  _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______,                   KC_BTN1,                   _______, _______, _______, _______),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    case _KC_COMS:
+      if (record->event.pressed) {
+        return MACRO(T(COMM), T(SPC), END); // comma + space
+      }
+      break;
+    case _KC_CENT:
+      if (record->event.pressed) {
+        return MACRO(T(COMM), T(ENT), END); // comma + enter
+      }
+      break;
+    case _DK_ACT:
+      if (record->event.pressed) {
+        if (keyboard_report->mods & MOD_BIT(KC_LSFT) || keyboard_report->mods & MOD_BIT(KC_RSFT)) { // act as comma when shift is pressed (eg <)
+          register_code(KC_COMM);
+        } else { // activate oneshot dead key layer otherwise
+          layer_on(_DK);
+          set_oneshot_layer(_DK, ONESHOT_START);
+        }
+      } else { // make sure to deactive dead key layer on key release
+        clear_oneshot_layer_state(ONESHOT_PRESSED);
+        unregister_code(KC_COMM);
+      }
+      break;
+    case _DK_REL:
+      if (record->event.pressed) { // act as 3 on keypress
+        register_code(KC_3);
+      } else { // make sure to deactive dead key layer on key release
+        clear_oneshot_layer_state(ONESHOT_PRESSED);
+        unregister_code(KC_3);
+      }
+      break;
+  }
+
+  return MACRO_NONE;
+};
-- 
cgit v1.2.3


From 32216066e7a6881378f7f46995a00da36c0d34f3 Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Fri, 19 Aug 2016 14:36:41 -0600
Subject: Adding nicer Infinity build instructions.

---
 keyboards/ergodox/readme.md | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index f81d7cd8df..9f89418634 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -1,3 +1,14 @@
+# Infinity on Ubuntu Quickstart
+
+To build an Infinity firmware under Ubuntu (tested on 15.10):
+
+  - Run the `util/install_dependencies.sh` script as root.
+  - Build the firmware with `make keymap=keymapname subproject=infinity`
+  - Plug in the left hand keyboard only.
+  - Press the program button (back of keyboard, above thumb pad).
+  - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity`
+  - Install the right hand firmware, but I haven't figured this out yet.
+
 # Getting started
 
 There are two main ways you could customize the ErgoDox (EZ and Infinity)
-- 
cgit v1.2.3


From 50531068b3aa1b4aced20a1488e3ae052925f651 Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Fri, 19 Aug 2016 14:42:41 -0600
Subject: Adding jafo layout.

---
 keyboards/ergodox/keymaps/jafo/jafo-Notes       |  10 ++
 keyboards/ergodox/keymaps/jafo/jafo-layout.pdf  | Bin 0 -> 185426 bytes
 keyboards/ergodox/keymaps/jafo/jafo_highres.png | Bin 0 -> 179460 bytes
 keyboards/ergodox/keymaps/jafo/keymap.c         | 184 ++++++++++++++++++++++++
 keyboards/ergodox/keymaps/jafo/readme.md        |  20 +++
 5 files changed, 214 insertions(+)
 create mode 100644 keyboards/ergodox/keymaps/jafo/jafo-Notes
 create mode 100644 keyboards/ergodox/keymaps/jafo/jafo-layout.pdf
 create mode 100644 keyboards/ergodox/keymaps/jafo/jafo_highres.png
 create mode 100644 keyboards/ergodox/keymaps/jafo/keymap.c
 create mode 100644 keyboards/ergodox/keymaps/jafo/readme.md

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/jafo/jafo-Notes b/keyboards/ergodox/keymaps/jafo/jafo-Notes
new file mode 100644
index 0000000000..9376125e90
--- /dev/null
+++ b/keyboards/ergodox/keymaps/jafo/jafo-Notes
@@ -0,0 +1,10 @@
+These are notes on how to build and deploy the firmware to Ez, but they are
+from before the qmk restructuring.
+
+cd qmk_firmware/keyboard/ergodox_ez
+make KEYMAP=jafo
+cp ergodox_ez.hex keymaps/jafo/
+/tmp/teensy.64bit
+Open hex keymap file
+Program
+Upload
diff --git a/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf
new file mode 100644
index 0000000000..189b49b128
Binary files /dev/null and b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf differ
diff --git a/keyboards/ergodox/keymaps/jafo/jafo_highres.png b/keyboards/ergodox/keymaps/jafo/jafo_highres.png
new file mode 100644
index 0000000000..e3d7cef858
Binary files /dev/null and b/keyboards/ergodox/keymaps/jafo/jafo_highres.png differ
diff --git a/keyboards/ergodox/keymaps/jafo/keymap.c b/keyboards/ergodox/keymaps/jafo/keymap.c
new file mode 100644
index 0000000000..c5f21bd82e
--- /dev/null
+++ b/keyboards/ergodox/keymaps/jafo/keymap.c
@@ -0,0 +1,184 @@
+#include "ergodox_ez.h"
+#include "debug.h"
+#include "action_layer.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Grv    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |   =    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Esc/Cmd|   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------|  L2  |           |  L2  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  | Del  | Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Ctrl/Esc| Alt|       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        KC_GRV,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_EQL,         KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        GUI_T(KC_ESC),  KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   TG(MDIA),
+        LT(SYMB,KC_GRV),KC_QUOT,      KC_DELT,  KC_LEFT,KC_RGHT,
+                                              CTL_T(KC_ESC),  KC_LALT,
+                                                              KC_HOME,
+                                               KC_SPC,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
+             TG(SYMB),    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+             TG(MDIA),    KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                                  KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
+             KC_LALT,        CTL_T(KC_ESC),
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------| LEFT | DOWN |  UP  | RIGHT|      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      | Lclk | Mclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN3, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          register_code(KC_RSFT);
+        } else {
+          unregister_code(KC_RSFT);
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/ergodox/keymaps/jafo/readme.md b/keyboards/ergodox/keymaps/jafo/readme.md
new file mode 100644
index 0000000000..c870dfd050
--- /dev/null
+++ b/keyboards/ergodox/keymaps/jafo/readme.md
@@ -0,0 +1,20 @@
+# ErgoDox EZ "jafo" Configuration
+
+This is a layout based on the ErgoDox Ez default layout, but with some
+customizations I made for my use-case.  I use Linux, vi and the i3 window
+manager, so I made these changes:
+
+- Arrow keys laid out in vi positions in media layer.
+
+- Esc (tap) and Win (held) to the left of A.  i3 uses Win key for navigation
+  and having that be symmetric on the left and right makes it easier.
+
+- Grave accent below equals, I was having a hard time using ~
+
+- Layer 2 switch below the L1 switch, so I can go into a mode where I get
+  arrow keys under my vi motion fingers.
+
+- Making the Ctrl (held) and Esc (tap) on my thumbs symmetric.  Not sure I
+  need that with the Esc left of A and Ctrl on the Z and / keys when held...
+
+![Jafo](jafo_highres.png)
-- 
cgit v1.2.3


From b918aa6bab85e7dba586a9ee2bde650b721113c2 Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Fri, 19 Aug 2016 14:49:29 -0600
Subject: Adding submodule note.

---
 keyboards/ergodox/readme.md | 1 +
 1 file changed, 1 insertion(+)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index 9f89418634..c3aa6c9da2 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -3,6 +3,7 @@
 To build an Infinity firmware under Ubuntu (tested on 15.10):
 
   - Run the `util/install_dependencies.sh` script as root.
+  - Check out the submodules with `git submodule update --init --recursive`
   - Build the firmware with `make keymap=keymapname subproject=infinity`
   - Plug in the left hand keyboard only.
   - Press the program button (back of keyboard, above thumb pad).
-- 
cgit v1.2.3


From 30c63b1495ac49cf4f7ea9e6271ade53496f7770 Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Fri, 19 Aug 2016 14:52:05 -0600
Subject: Noting the change directory.

---
 keyboards/ergodox/readme.md | 1 +
 1 file changed, 1 insertion(+)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index c3aa6c9da2..1c1181dbae 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -4,6 +4,7 @@ To build an Infinity firmware under Ubuntu (tested on 15.10):
 
   - Run the `util/install_dependencies.sh` script as root.
   - Check out the submodules with `git submodule update --init --recursive`
+  - Go into the ErgoDox directory with `cd keyboards/ergodox`
   - Build the firmware with `make keymap=keymapname subproject=infinity`
   - Plug in the left hand keyboard only.
   - Press the program button (back of keyboard, above thumb pad).
-- 
cgit v1.2.3


From 44441de8cad7255fd0637459ed39b89e34751b78 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 7 Aug 2016 17:04:39 +0300
Subject: Split keyboard makefiles into rules and Makefile

---
 keyboards/alps64/Makefile           |  69 +----------------------
 keyboards/alps64/rules.mk           |  66 ++++++++++++++++++++++
 keyboards/amj60/Makefile            |  71 +-----------------------
 keyboards/amj60/rules.mk            |  66 ++++++++++++++++++++++
 keyboards/arrow_pad/Makefile        |  73 +-----------------------
 keyboards/arrow_pad/rules.mk        |  70 +++++++++++++++++++++++
 keyboards/atomic/Makefile           |  72 +-----------------------
 keyboards/atomic/rules.mk           |  69 +++++++++++++++++++++++
 keyboards/atreus/Makefile           |  89 +----------------------------
 keyboards/atreus/rules.mk           |  82 +++++++++++++++++++++++++++
 keyboards/bantam44/Makefile         |  73 +-----------------------
 keyboards/bantam44/rules.mk         |  67 ++++++++++++++++++++++
 keyboards/chibios_test/Makefile     |  11 +---
 keyboards/chibios_test/rules.mk     |   8 +++
 keyboards/clueboard/Makefile        | 108 +-----------------------------------
 keyboards/clueboard/rules.mk        | 103 ++++++++++++++++++++++++++++++++++
 keyboards/cluecard/Makefile         |  77 +------------------------
 keyboards/cluecard/rules.mk         |  70 +++++++++++++++++++++++
 keyboards/cluepad/Makefile          |  71 +-----------------------
 keyboards/cluepad/rules.mk          |  65 ++++++++++++++++++++++
 keyboards/ergodox/Makefile          |  33 +----------
 keyboards/ergodox/rules.mk          |  28 ++++++++++
 keyboards/gh60/Makefile             |  77 +------------------------
 keyboards/gh60/rules.mk             |  68 +++++++++++++++++++++++
 keyboards/handwired/Makefile        |   2 +-
 keyboards/handwired/onekey/Makefile |  66 +---------------------
 keyboards/handwired/rules.mk        |   0
 keyboards/hhkb/Makefile             |  91 +-----------------------------
 keyboards/hhkb/rules.mk             |  84 ++++++++++++++++++++++++++++
 keyboards/infinity_chibios/Makefile |  69 +----------------------
 keyboards/infinity_chibios/rules.mk |  66 ++++++++++++++++++++++
 keyboards/jd45/Makefile             |  72 +-----------------------
 keyboards/jd45/rules.mk             |  67 ++++++++++++++++++++++
 keyboards/kc60/Makefile             |  77 +------------------------
 keyboards/kc60/rules.mk             |  70 +++++++++++++++++++++++
 keyboards/kinesis/Makefile          |  80 +-------------------------
 keyboards/kinesis/rules.mk          |  73 ++++++++++++++++++++++++
 keyboards/lets_split/Makefile       |  77 +------------------------
 keyboards/lets_split/rules.mk       |  74 ++++++++++++++++++++++++
 keyboards/phantom/Makefile          |  75 +------------------------
 keyboards/phantom/rules.mk          |  69 +++++++++++++++++++++++
 keyboards/planck/Makefile           |  71 +-----------------------
 keyboards/planck/rules.mk           |  67 ++++++++++++++++++++++
 keyboards/preonic/Makefile          |  72 +-----------------------
 keyboards/preonic/rules.mk          |  69 +++++++++++++++++++++++
 keyboards/retro_refit/Makefile      |  75 +------------------------
 keyboards/retro_refit/rules.mk      |  68 +++++++++++++++++++++++
 keyboards/s60-x/Makefile            |  76 +------------------------
 keyboards/s60-x/rules.mk            |  69 +++++++++++++++++++++++
 keyboards/satan/Makefile            |  71 +-----------------------
 keyboards/satan/rules.mk            |  66 ++++++++++++++++++++++
 keyboards/sixkeyboard/Makefile      |  76 +------------------------
 keyboards/sixkeyboard/rules.mk      |  70 +++++++++++++++++++++++
 keyboards/tv44/Makefile             |  76 +------------------------
 keyboards/tv44/rules.mk             |  69 +++++++++++++++++++++++
 55 files changed, 1791 insertions(+), 1902 deletions(-)
 create mode 100644 keyboards/alps64/rules.mk
 create mode 100644 keyboards/amj60/rules.mk
 create mode 100644 keyboards/arrow_pad/rules.mk
 create mode 100644 keyboards/atomic/rules.mk
 create mode 100644 keyboards/atreus/rules.mk
 create mode 100644 keyboards/bantam44/rules.mk
 create mode 100644 keyboards/chibios_test/rules.mk
 create mode 100644 keyboards/clueboard/rules.mk
 create mode 100644 keyboards/cluecard/rules.mk
 create mode 100644 keyboards/cluepad/rules.mk
 create mode 100644 keyboards/ergodox/rules.mk
 create mode 100644 keyboards/gh60/rules.mk
 create mode 100644 keyboards/handwired/rules.mk
 create mode 100644 keyboards/hhkb/rules.mk
 create mode 100644 keyboards/infinity_chibios/rules.mk
 create mode 100644 keyboards/jd45/rules.mk
 create mode 100644 keyboards/kc60/rules.mk
 create mode 100644 keyboards/kinesis/rules.mk
 create mode 100644 keyboards/lets_split/rules.mk
 create mode 100644 keyboards/phantom/rules.mk
 create mode 100644 keyboards/planck/rules.mk
 create mode 100644 keyboards/preonic/rules.mk
 create mode 100644 keyboards/retro_refit/rules.mk
 create mode 100644 keyboards/s60-x/rules.mk
 create mode 100644 keyboards/satan/rules.mk
 create mode 100644 keyboards/sixkeyboard/rules.mk
 create mode 100644 keyboards/tv44/rules.mk

(limited to 'keyboards')

diff --git a/keyboards/alps64/Makefile b/keyboards/alps64/Makefile
index d8325e6c89..4e2a6f00fd 100644
--- a/keyboards/alps64/Makefile
+++ b/keyboards/alps64/Makefile
@@ -1,70 +1,3 @@
-
-
-# Target file name (without extension).
-
-# project specific files
-SRC = led.c
-
-# MCU name
-MCU = atmega32u2
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/alps64/rules.mk b/keyboards/alps64/rules.mk
new file mode 100644
index 0000000000..c326d3e26c
--- /dev/null
+++ b/keyboards/alps64/rules.mk
@@ -0,0 +1,66 @@
+
+
+# Target file name (without extension).
+
+# project specific files
+SRC = led.c
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
\ No newline at end of file
diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile
index 1f695aa4d8..4e2a6f00fd 100644
--- a/keyboards/amj60/Makefile
+++ b/keyboards/amj60/Makefile
@@ -1,70 +1,3 @@
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= yes # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE      ?= no  # MIDI controls
-AUDIO_ENABLE     ?= no
-UNICODE_ENABLE   ?= no  # Unicode
-BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk
new file mode 100644
index 0000000000..18403ac328
--- /dev/null
+++ b/keyboards/amj60/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= yes # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      ?= no  # MIDI controls
+AUDIO_ENABLE     ?= no
+UNICODE_ENABLE   ?= no  # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/arrow_pad/Makefile b/keyboards/arrow_pad/Makefile
index 09fcf3e7a0..4e2a6f00fd 100644
--- a/keyboards/arrow_pad/Makefile
+++ b/keyboards/arrow_pad/Makefile
@@ -1,74 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/arrow_pad/rules.mk b/keyboards/arrow_pad/rules.mk
new file mode 100644
index 0000000000..3dca9b6ea7
--- /dev/null
+++ b/keyboards/arrow_pad/rules.mk
@@ -0,0 +1,70 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file
diff --git a/keyboards/atomic/Makefile b/keyboards/atomic/Makefile
index 08e9205cbf..4e2a6f00fd 100644
--- a/keyboards/atomic/Makefile
+++ b/keyboards/atomic/Makefile
@@ -1,73 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/atomic/rules.mk b/keyboards/atomic/rules.mk
new file mode 100644
index 0000000000..d0f3a3a1c0
--- /dev/null
+++ b/keyboards/atomic/rules.mk
@@ -0,0 +1,69 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile
index 5894d231f9..4e2a6f00fd 100644
--- a/keyboards/atreus/Makefile
+++ b/keyboards/atreus/Makefile
@@ -1,88 +1,3 @@
-
-
-ifdef TEENSY2
-    OPT_DEFS += -DATREUS_TEENSY2
-    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
-else
-    OPT_DEFS += -DATREUS_ASTAR
-    OPT_DEFS += -DCATERINA_BOOTLOADER
-    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
-                            avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
-endif
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-USB ?= /dev/cu.usbmodem1411
-
-upload: build
-	$(ATREUS_UPLOAD_COMMAND)
-	
+endif
\ No newline at end of file
diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk
new file mode 100644
index 0000000000..d71f50bb2b
--- /dev/null
+++ b/keyboards/atreus/rules.mk
@@ -0,0 +1,82 @@
+
+
+ifdef TEENSY2
+    OPT_DEFS += -DATREUS_TEENSY2
+    ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+else
+    OPT_DEFS += -DATREUS_ASTAR
+    OPT_DEFS += -DCATERINA_BOOTLOADER
+    ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                            avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+endif
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES 		# MIDI controls
+UNICODE_ENABLE ?= YES 		# Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+USB ?= /dev/cu.usbmodem1411
+
+upload: build
+	$(ATRUES_UPLOAD_COMMAND)
\ No newline at end of file
diff --git a/keyboards/bantam44/Makefile b/keyboards/bantam44/Makefile
index 03893dbf89..4e2a6f00fd 100644
--- a/keyboards/bantam44/Makefile
+++ b/keyboards/bantam44/Makefile
@@ -1,72 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
+endif
\ No newline at end of file
diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk
new file mode 100644
index 0000000000..baa0e9e7a2
--- /dev/null
+++ b/keyboards/bantam44/rules.mk
@@ -0,0 +1,67 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES 		# MIDI controls
+# UNICODE_ENABLE ?= YES 		# Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/chibios_test/Makefile b/keyboards/chibios_test/Makefile
index d9f2b8b83b..4b07a62343 100644
--- a/keyboards/chibios_test/Makefile
+++ b/keyboards/chibios_test/Makefile
@@ -1,14 +1,5 @@
 SUBPROJECT_DEFAULT = stm32_f072_onekey
 
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/chibios_test/rules.mk b/keyboards/chibios_test/rules.mk
new file mode 100644
index 0000000000..4b5a845356
--- /dev/null
+++ b/keyboards/chibios_test/rules.mk
@@ -0,0 +1,8 @@
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE ?= yes	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+CONSOLE_ENABLE ?= yes	# Console for debug
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	    # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file
diff --git a/keyboards/clueboard/Makefile b/keyboards/clueboard/Makefile
index e6b13f955a..b9bada8f8d 100644
--- a/keyboards/clueboard/Makefile
+++ b/keyboards/clueboard/Makefile
@@ -1,109 +1,5 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
 SUBPROJECT_DEFAULT = rev2
 
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change to no to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality
-MIDI_ENABLE ?= no 		# MIDI controls
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk
new file mode 100644
index 0000000000..3909fbd5cb
--- /dev/null
+++ b/keyboards/clueboard/rules.mk
@@ -0,0 +1,103 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality
+MIDI_ENABLE ?= no 		# MIDI controls
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
diff --git a/keyboards/cluecard/Makefile b/keyboards/cluecard/Makefile
index 029d0b9670..4e2a6f00fd 100644
--- a/keyboards/cluecard/Makefile
+++ b/keyboards/cluecard/Makefile
@@ -1,76 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-RGBLIGHT_ENABLE ?= yes       # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes       # Enable keyboard backlight functionality by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= yes           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-
+endif
\ No newline at end of file
diff --git a/keyboards/cluecard/rules.mk b/keyboards/cluecard/rules.mk
new file mode 100644
index 0000000000..454235877d
--- /dev/null
+++ b/keyboards/cluecard/rules.mk
@@ -0,0 +1,70 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+RGBLIGHT_ENABLE ?= yes       # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes       # Enable keyboard backlight functionality by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= yes           # Audio output on port C6
diff --git a/keyboards/cluepad/Makefile b/keyboards/cluepad/Makefile
index a331ff4dcd..4e2a6f00fd 100644
--- a/keyboards/cluepad/Makefile
+++ b/keyboards/cluepad/Makefile
@@ -1,70 +1,3 @@
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-# EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable numpad's backlight functionality
-RGBLIGHT_ENABLE ?= yes
-# MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/cluepad/rules.mk b/keyboards/cluepad/rules.mk
new file mode 100644
index 0000000000..19b16b95a9
--- /dev/null
+++ b/keyboards/cluepad/rules.mk
@@ -0,0 +1,65 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+# EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable numpad's backlight functionality
+RGBLIGHT_ENABLE ?= yes
+# MIDI_ENABLE ?= YES 		# MIDI controls
+# UNICODE_ENABLE ?= YES 		# Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
diff --git a/keyboards/ergodox/Makefile b/keyboards/ergodox/Makefile
index 05fb588d11..7165350050 100644
--- a/keyboards/ergodox/Makefile
+++ b/keyboards/ergodox/Makefile
@@ -1,34 +1,5 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make = Make software.
-#
-# make clean = Clean out built project files.
-#
-# That's pretty much all you need. To compile, always go make clean, 
-# followed by make.
-#
-# For advanced users only:
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-#----------------------------------------------------------------------------
 SUBPROJECT_DEFAULT = ez
 
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= no  # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file for the ErgoDox EZ
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-MIDI_ENABLE      ?= no  # MIDI controls
-UNICODE_ENABLE   ?= yes # Unicode
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk
new file mode 100644
index 0000000000..ac63d4eff2
--- /dev/null
+++ b/keyboards/ergodox/rules.mk
@@ -0,0 +1,28 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make = Make software.
+#
+# make clean = Clean out built project files.
+#
+# That's pretty much all you need. To compile, always go make clean, 
+# followed by make.
+#
+# For advanced users only:
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+#----------------------------------------------------------------------------
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= no  # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+CUSTOM_MATRIX    ?= yes # Custom matrix file for the ErgoDox EZ
+SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+MIDI_ENABLE      ?= no  # MIDI controls
+UNICODE_ENABLE   ?= yes # Unicode
diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile
index 39a9cc0ae1..4e2a6f00fd 100644
--- a/keyboards/gh60/Makefile
+++ b/keyboards/gh60/Makefile
@@ -1,74 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-ifndef QUANTUM_DIR
-	include ../../Makefile
-endif
-
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/gh60/rules.mk b/keyboards/gh60/rules.mk
new file mode 100644
index 0000000000..73f4bd76e8
--- /dev/null
+++ b/keyboards/gh60/rules.mk
@@ -0,0 +1,68 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES			# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/handwired/Makefile b/keyboards/handwired/Makefile
index 57493a47ca..4e2a6f00fd 100644
--- a/keyboards/handwired/Makefile
+++ b/keyboards/handwired/Makefile
@@ -1,3 +1,3 @@
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile
index c6d10856a1..4e2a6f00fd 100644
--- a/keyboards/handwired/onekey/Makefile
+++ b/keyboards/handwired/onekey/Makefile
@@ -1,65 +1,3 @@
-
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/handwired/rules.mk b/keyboards/handwired/rules.mk
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile
index 6fe973e1eb..4e2a6f00fd 100644
--- a/keyboards/hhkb/Makefile
+++ b/keyboards/hhkb/Makefile
@@ -1,90 +1,3 @@
-
-
-# project specific files
-SRC = matrix.c
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-#OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# as per original hasu settings
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file for the HHKB
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-ifneq (, $(findstring yes, $(HHKB_JP)))
-	OPT_DEFS += -DHHKB_JP
-endif
-
-debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
-debug-on: all
-
-debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
-debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
-debug-off: all
+endif
\ No newline at end of file
diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk
new file mode 100644
index 0000000000..b43b5e23f1
--- /dev/null
+++ b/keyboards/hhkb/rules.mk
@@ -0,0 +1,84 @@
+
+
+# project specific files
+SRC = matrix.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+#OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# as per original hasu settings
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+CUSTOM_MATRIX    ?= yes # Custom matrix file for the HHKB
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES		# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifneq (, $(findstring yes, $(HHKB_JP)))
+	OPT_DEFS += -DHHKB_JP
+endif
+
+debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
+debug-on: all
+
+debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
+debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
+debug-off: all
diff --git a/keyboards/infinity_chibios/Makefile b/keyboards/infinity_chibios/Makefile
index 649b43e64d..4e2a6f00fd 100644
--- a/keyboards/infinity_chibios/Makefile
+++ b/keyboards/infinity_chibios/Makefile
@@ -1,70 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX128BLDR4
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity KB
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-BOARD = MCHCK_K20
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/infinity_chibios/rules.mk b/keyboards/infinity_chibios/rules.mk
new file mode 100644
index 0000000000..56d6470b59
--- /dev/null
+++ b/keyboards/infinity_chibios/rules.mk
@@ -0,0 +1,66 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX128BLDR4
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity KB
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x5
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+BOARD = MCHCK_K20
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+CONSOLE_ENABLE ?= yes	# Console for debug
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	    # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file
diff --git a/keyboards/jd45/Makefile b/keyboards/jd45/Makefile
index 75d544f16a..4e2a6f00fd 100644
--- a/keyboards/jd45/Makefile
+++ b/keyboards/jd45/Makefile
@@ -1,71 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk
new file mode 100644
index 0000000000..2f1e266a14
--- /dev/null
+++ b/keyboards/jd45/rules.mk
@@ -0,0 +1,67 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+MIDI_ENABLE ?= YES 		# MIDI controls
+# UNICODE_ENABLE ?= YES 		# Unicode
+BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile
index b00a488b91..4e2a6f00fd 100644
--- a/keyboards/kc60/Makefile
+++ b/keyboards/kc60/Makefile
@@ -1,76 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
+endif
\ No newline at end of file
diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk
new file mode 100644
index 0000000000..4efd6f9887
--- /dev/null
+++ b/keyboards/kc60/rules.mk
@@ -0,0 +1,70 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
diff --git a/keyboards/kinesis/Makefile b/keyboards/kinesis/Makefile
index ca077e6366..4e2a6f00fd 100644
--- a/keyboards/kinesis/Makefile
+++ b/keyboards/kinesis/Makefile
@@ -1,79 +1,3 @@
-
-## Project specific files
-
-SRC=  matrix.c 
-
-# MCU name
-MCU = at90usb1286
-#MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=1024
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming
-CUSTOM_MATRIX=yes # need to do our own thing with the matrix
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-
+endif
\ No newline at end of file
diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk
new file mode 100644
index 0000000000..a4a2b7d156
--- /dev/null
+++ b/keyboards/kinesis/rules.mk
@@ -0,0 +1,73 @@
+
+## Project specific files
+
+SRC=  matrix.c 
+
+# MCU name
+MCU = at90usb1286
+#MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=1024
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no        # Console for debug(+400)
+COMMAND_ENABLE ?= no
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming
+CUSTOM_MATRIX=yes # need to do our own thing with the matrix
diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile
index b9f07636be..4e2a6f00fd 100644
--- a/keyboards/lets_split/Makefile
+++ b/keyboards/lets_split/Makefile
@@ -1,78 +1,3 @@
-SRC += matrix.c \
-	   i2c.c \
-	   split_util.c \
-	   serial.c
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= yes           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-
-CUSTOM_MATRIX = yes
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk
new file mode 100644
index 0000000000..6961fbd556
--- /dev/null
+++ b/keyboards/lets_split/rules.mk
@@ -0,0 +1,74 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= yes           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
\ No newline at end of file
diff --git a/keyboards/phantom/Makefile b/keyboards/phantom/Makefile
index 3a71fd0ee3..4e2a6f00fd 100644
--- a/keyboards/phantom/Makefile
+++ b/keyboards/phantom/Makefile
@@ -1,74 +1,3 @@
-
-
-SRC = led.c
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?=yes   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/phantom/rules.mk b/keyboards/phantom/rules.mk
new file mode 100644
index 0000000000..c6b8ca6c35
--- /dev/null
+++ b/keyboards/phantom/rules.mk
@@ -0,0 +1,69 @@
+
+
+SRC = led.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?=yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/planck/Makefile b/keyboards/planck/Makefile
index 23944f92ea..7d49c5ef96 100644
--- a/keyboards/planck/Makefile
+++ b/keyboards/planck/Makefile
@@ -1,74 +1,5 @@
-
 SUBPROJECT_DEFAULT = rev4
 
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk
new file mode 100644
index 0000000000..25db53a315
--- /dev/null
+++ b/keyboards/planck/rules.mk
@@ -0,0 +1,67 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/preonic/Makefile b/keyboards/preonic/Makefile
index 08e9205cbf..4e2a6f00fd 100644
--- a/keyboards/preonic/Makefile
+++ b/keyboards/preonic/Makefile
@@ -1,73 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk
new file mode 100644
index 0000000000..d0f3a3a1c0
--- /dev/null
+++ b/keyboards/preonic/rules.mk
@@ -0,0 +1,69 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/retro_refit/Makefile b/keyboards/retro_refit/Makefile
index 2dd8cc5f79..4e2a6f00fd 100644
--- a/keyboards/retro_refit/Makefile
+++ b/keyboards/retro_refit/Makefile
@@ -1,74 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
+endif
\ No newline at end of file
diff --git a/keyboards/retro_refit/rules.mk b/keyboards/retro_refit/rules.mk
new file mode 100644
index 0000000000..10fbfa5c9d
--- /dev/null
+++ b/keyboards/retro_refit/rules.mk
@@ -0,0 +1,68 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES			# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
index 8b51d4609f..4e2a6f00fd 100644
--- a/keyboards/s60-x/Makefile
+++ b/keyboards/s60-x/Makefile
@@ -1,75 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/rules.mk b/keyboards/s60-x/rules.mk
new file mode 100644
index 0000000000..7ec93933a9
--- /dev/null
+++ b/keyboards/s60-x/rules.mk
@@ -0,0 +1,69 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file
diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile
index a0879fc9c9..4e2a6f00fd 100644
--- a/keyboards/satan/Makefile
+++ b/keyboards/satan/Makefile
@@ -1,70 +1,3 @@
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= yes   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/satan/rules.mk b/keyboards/satan/rules.mk
new file mode 100644
index 0000000000..1102584d8a
--- /dev/null
+++ b/keyboards/satan/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/sixkeyboard/Makefile b/keyboards/sixkeyboard/Makefile
index 6f273064a7..4e2a6f00fd 100644
--- a/keyboards/sixkeyboard/Makefile
+++ b/keyboards/sixkeyboard/Makefile
@@ -1,75 +1,3 @@
-
-
-SRC = matrix.c
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega16u2
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= no		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= no		# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no		# Console for debug(+400)
-COMMAND_ENABLE ?= no		# Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= no			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no	# Enable keyboard backlight functionality
-MIDI_ENABLE ?= no			# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no		# Unicode
-BLUETOOTH_ENABLE ?= no	# Enable Bluetooth with the Adafruit EZ-Key HID
-CUSTOM_MATRIX = yes
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
+endif
\ No newline at end of file
diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk
new file mode 100644
index 0000000000..2c99985a97
--- /dev/null
+++ b/keyboards/sixkeyboard/rules.mk
@@ -0,0 +1,70 @@
+
+
+SRC = matrix.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega16u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= no		# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no		# Console for debug(+400)
+COMMAND_ENABLE ?= no		# Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= no			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no	# Enable keyboard backlight functionality
+MIDI_ENABLE ?= no			# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no		# Unicode
+BLUETOOTH_ENABLE ?= no	# Enable Bluetooth with the Adafruit EZ-Key HID
+CUSTOM_MATRIX = yes
\ No newline at end of file
diff --git a/keyboards/tv44/Makefile b/keyboards/tv44/Makefile
index 45ca127807..4e2a6f00fd 100644
--- a/keyboards/tv44/Makefile
+++ b/keyboards/tv44/Makefile
@@ -1,75 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-
+endif
\ No newline at end of file
diff --git a/keyboards/tv44/rules.mk b/keyboards/tv44/rules.mk
new file mode 100644
index 0000000000..dbba6bace6
--- /dev/null
+++ b/keyboards/tv44/rules.mk
@@ -0,0 +1,69 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
-- 
cgit v1.2.3


From 051017c3129a17a1f4c610f19067c60bf0a49da9 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 7 Aug 2016 18:38:03 +0300
Subject: Split subproject make files into Makefile and rules.mk

---
 keyboards/chibios_test/stm32_f072_onekey/Makefile | 42 +----------
 keyboards/chibios_test/stm32_f072_onekey/rules.mk | 41 +++++++++++
 keyboards/chibios_test/stm32_f103_onekey/Makefile | 53 +------------
 keyboards/chibios_test/stm32_f103_onekey/rules.mk | 52 +++++++++++++
 keyboards/chibios_test/teensy_lc_onekey/Makefile  | 48 +-----------
 keyboards/chibios_test/teensy_lc_onekey/rules.mk  | 49 ++++++++++++
 keyboards/clueboard/rev1/Makefile                 |  6 +-
 keyboards/clueboard/rev1/rules.mk                 |  5 ++
 keyboards/clueboard/rev2/Makefile                 |  6 +-
 keyboards/clueboard/rev2/rules.mk                 |  5 ++
 keyboards/ergodox/ez/Makefile                     | 77 +------------------
 keyboards/ergodox/ez/rules.mk                     | 76 +++++++++++++++++++
 keyboards/ergodox/infinity/Makefile               | 78 +-------------------
 keyboards/ergodox/infinity/rules.mk               | 77 +++++++++++++++++++
 keyboards/handwired/CMD60/Makefile                | 74 +------------------
 keyboards/handwired/CMD60/rules.mk                | 73 ++++++++++++++++++
 keyboards/handwired/fivethirteen/Makefile         | 74 +------------------
 keyboards/handwired/fivethirteen/rules.mk         | 73 ++++++++++++++++++
 keyboards/handwired/minorca/Makefile              | 70 +-----------------
 keyboards/handwired/minorca/rules.mk              | 67 +++++++++++++++++
 keyboards/handwired/onekey/Makefile               |  2 +-
 keyboards/handwired/onekey/rules.mk               | 65 ++++++++++++++++
 keyboards/handwired/traveller/Makefile            | 90 +----------------------
 keyboards/handwired/traveller/rules.mk            | 89 ++++++++++++++++++++++
 keyboards/planck/rev3/Makefile                    |  4 +-
 keyboards/planck/rev3/rules.mk                    |  5 ++
 keyboards/planck/rev4/Makefile                    |  4 +-
 keyboards/planck/rev4/rules.mk                    |  5 ++
 28 files changed, 705 insertions(+), 605 deletions(-)
 create mode 100644 keyboards/chibios_test/stm32_f072_onekey/rules.mk
 create mode 100644 keyboards/chibios_test/stm32_f103_onekey/rules.mk
 create mode 100644 keyboards/chibios_test/teensy_lc_onekey/rules.mk
 create mode 100644 keyboards/clueboard/rev1/rules.mk
 create mode 100644 keyboards/clueboard/rev2/rules.mk
 create mode 100644 keyboards/ergodox/ez/rules.mk
 create mode 100644 keyboards/ergodox/infinity/rules.mk
 create mode 100644 keyboards/handwired/CMD60/rules.mk
 create mode 100644 keyboards/handwired/fivethirteen/rules.mk
 create mode 100644 keyboards/handwired/minorca/rules.mk
 create mode 100644 keyboards/handwired/onekey/rules.mk
 create mode 100644 keyboards/handwired/traveller/rules.mk
 create mode 100644 keyboards/planck/rev3/rules.mk
 create mode 100644 keyboards/planck/rev4/rules.mk

(limited to 'keyboards')

diff --git a/keyboards/chibios_test/stm32_f072_onekey/Makefile b/keyboards/chibios_test/stm32_f072_onekey/Makefile
index eae38c4b2b..191c6bb664 100644
--- a/keyboards/chibios_test/stm32_f072_onekey/Makefile
+++ b/keyboards/chibios_test/stm32_f072_onekey/Makefile
@@ -1,41 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Build Options
-#   comment out to disable the options.
-#
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/chibios_test/stm32_f072_onekey/rules.mk b/keyboards/chibios_test/stm32_f072_onekey/rules.mk
new file mode 100644
index 0000000000..eae38c4b2b
--- /dev/null
+++ b/keyboards/chibios_test/stm32_f072_onekey/rules.mk
@@ -0,0 +1,41 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/chibios_test/stm32_f103_onekey/Makefile b/keyboards/chibios_test/stm32_f103_onekey/Makefile
index 307ca5b198..191c6bb664 100644
--- a/keyboards/chibios_test/stm32_f103_onekey/Makefile
+++ b/keyboards/chibios_test/stm32_f103_onekey/Makefile
@@ -1,52 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = GENERIC_STM32_F103
-
-# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-# MAPLE MINI
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
-# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
-# BOARD = MAPLEMINI_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/chibios_test/stm32_f103_onekey/rules.mk b/keyboards/chibios_test/stm32_f103_onekey/rules.mk
new file mode 100644
index 0000000000..307ca5b198
--- /dev/null
+++ b/keyboards/chibios_test/stm32_f103_onekey/rules.mk
@@ -0,0 +1,52 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+# MAPLE MINI
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
+# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
+# BOARD = MAPLEMINI_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile
index 43ea9d82d9..191c6bb664 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/Makefile
+++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile
@@ -1,49 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = KL2x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MKL26Z64
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = kl2x
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_LC
-
-# Cortex version
-# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
-MCU  = cortex-m0plus
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/chibios_test/teensy_lc_onekey/rules.mk b/keyboards/chibios_test/teensy_lc_onekey/rules.mk
new file mode 100644
index 0000000000..43ea9d82d9
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/rules.mk
@@ -0,0 +1,49 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = KL2x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MKL26Z64
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = kl2x
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_LC
+
+# Cortex version
+# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
+MCU  = cortex-m0plus
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/clueboard/rev1/Makefile b/keyboards/clueboard/rev1/Makefile
index 80a942d06f..191c6bb664 100644
--- a/keyboards/clueboard/rev1/Makefile
+++ b/keyboards/clueboard/rev1/Makefile
@@ -1,5 +1,3 @@
-BACKLIGHT_ENABLE = no
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/clueboard/rev1/rules.mk b/keyboards/clueboard/rev1/rules.mk
new file mode 100644
index 0000000000..80a942d06f
--- /dev/null
+++ b/keyboards/clueboard/rev1/rules.mk
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile
index cea967b795..191c6bb664 100644
--- a/keyboards/clueboard/rev2/Makefile
+++ b/keyboards/clueboard/rev2/Makefile
@@ -1,5 +1,3 @@
-BACKLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/clueboard/rev2/rules.mk b/keyboards/clueboard/rev2/rules.mk
new file mode 100644
index 0000000000..cea967b795
--- /dev/null
+++ b/keyboards/clueboard/rev2/rules.mk
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile
index 37e554b304..191c6bb664 100644
--- a/keyboards/ergodox/ez/Makefile
+++ b/keyboards/ergodox/ez/Makefile
@@ -1,76 +1,3 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make = Make software.
-#
-# make clean = Clean out built project files.
-#
-# That's pretty much all you need. To compile, always go make clean, 
-# followed by make.
-#
-# For advanced users only:
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-#----------------------------------------------------------------------------
-
-# # project specific files
-SRC = twimaster.c \
-	  matrix.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   comment out to disable the options.
-#
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk
new file mode 100644
index 0000000000..37e554b304
--- /dev/null
+++ b/keyboards/ergodox/ez/rules.mk
@@ -0,0 +1,76 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make = Make software.
+#
+# make clean = Clean out built project files.
+#
+# That's pretty much all you need. To compile, always go make clean, 
+# followed by make.
+#
+# For advanced users only:
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+#----------------------------------------------------------------------------
+
+# # project specific files
+SRC = twimaster.c \
+	  matrix.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   comment out to disable the options.
+#
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile
index ccb735a485..191c6bb664 100644
--- a/keyboards/ergodox/infinity/Makefile
+++ b/keyboards/ergodox/infinity/Makefile
@@ -1,77 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity 60%
-#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-#BOARD = MCHCK_K20
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-
-# Build Options
-#   comment out to disable the options.
-#
-CUSTOM_MATRIX ?= yes # Custom matrix file
-SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
-LCD_ENABLE ?= yes
-LED_ENABLE ?= yes
-LCD_BACKLIGHT_ENABLE ?= yes
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
-
-ifdef LCD_ENABLE
-include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
-endif
-
-ifdef LED_ENABLE
-include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
new file mode 100644
index 0000000000..ccb735a485
--- /dev/null
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -0,0 +1,77 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
+#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity 60%
+#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+#BOARD = MCHCK_K20
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
+
+# Build Options
+#   comment out to disable the options.
+#
+CUSTOM_MATRIX ?= yes # Custom matrix file
+SERIAL_LINK_ENABLE = yes
+VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
+LCD_ENABLE ?= yes
+LED_ENABLE ?= yes
+LCD_BACKLIGHT_ENABLE ?= yes
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+ifdef LCD_ENABLE
+include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
+endif
+
+ifdef LED_ENABLE
+include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+endif
diff --git a/keyboards/handwired/CMD60/Makefile b/keyboards/handwired/CMD60/Makefile
index 7117599173..191c6bb664 100644
--- a/keyboards/handwired/CMD60/Makefile
+++ b/keyboards/handwired/CMD60/Makefile
@@ -1,73 +1,3 @@
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
-
-
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/CMD60/rules.mk b/keyboards/handwired/CMD60/rules.mk
new file mode 100644
index 0000000000..7117599173
--- /dev/null
+++ b/keyboards/handwired/CMD60/rules.mk
@@ -0,0 +1,73 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+
diff --git a/keyboards/handwired/fivethirteen/Makefile b/keyboards/handwired/fivethirteen/Makefile
index 7117599173..191c6bb664 100644
--- a/keyboards/handwired/fivethirteen/Makefile
+++ b/keyboards/handwired/fivethirteen/Makefile
@@ -1,73 +1,3 @@
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
-
-
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk
new file mode 100644
index 0000000000..7117599173
--- /dev/null
+++ b/keyboards/handwired/fivethirteen/rules.mk
@@ -0,0 +1,73 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+
diff --git a/keyboards/handwired/minorca/Makefile b/keyboards/handwired/minorca/Makefile
index 155c1f9a29..191c6bb664 100644
--- a/keyboards/handwired/minorca/Makefile
+++ b/keyboards/handwired/minorca/Makefile
@@ -1,71 +1,3 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk
new file mode 100644
index 0000000000..c51371a781
--- /dev/null
+++ b/keyboards/handwired/minorca/rules.mk
@@ -0,0 +1,67 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile
index 4e2a6f00fd..191c6bb664 100644
--- a/keyboards/handwired/onekey/Makefile
+++ b/keyboards/handwired/onekey/Makefile
@@ -1,3 +1,3 @@
 ifndef MAKEFILE_INCLUDED
-	include ../../Makefile
+	include ../../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk
new file mode 100644
index 0000000000..c6d10856a1
--- /dev/null
+++ b/keyboards/handwired/onekey/rules.mk
@@ -0,0 +1,65 @@
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/traveller/Makefile b/keyboards/handwired/traveller/Makefile
index 12a4b71f4e..191c6bb664 100644
--- a/keyboards/handwired/traveller/Makefile
+++ b/keyboards/handwired/traveller/Makefile
@@ -1,89 +1,3 @@
-
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-# for avr upload
-USB ?= /dev/cu.usbmodem1421
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-ifdef TEENSY2
-    OPT_DEFS += -DATREUS_TEENSY2
-    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
-else
-    OPT_DEFS += -DATREUS_ASTAR
-    OPT_DEFS += -DCATERINA_BOOTLOADER
-    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
-                            avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
-endif
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# MCU name
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
-
-upload: build
-	$(ATREUS_UPLOAD_COMMAND)
-
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk
new file mode 100644
index 0000000000..12a4b71f4e
--- /dev/null
+++ b/keyboards/handwired/traveller/rules.mk
@@ -0,0 +1,89 @@
+
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+# for avr upload
+USB ?= /dev/cu.usbmodem1421
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+ifdef TEENSY2
+    OPT_DEFS += -DATREUS_TEENSY2
+    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+else
+    OPT_DEFS += -DATREUS_ASTAR
+    OPT_DEFS += -DCATERINA_BOOTLOADER
+    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                            avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+endif
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# MCU name
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no        # Console for debug(+400)
+COMMAND_ENABLE ?= no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+RGBLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+upload: build
+	$(ATREUS_UPLOAD_COMMAND)
+
diff --git a/keyboards/planck/rev3/Makefile b/keyboards/planck/rev3/Makefile
index 3ed1445e43..191c6bb664 100644
--- a/keyboards/planck/rev3/Makefile
+++ b/keyboards/planck/rev3/Makefile
@@ -1,5 +1,3 @@
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk
new file mode 100644
index 0000000000..3ed1445e43
--- /dev/null
+++ b/keyboards/planck/rev3/rules.mk
@@ -0,0 +1,5 @@
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/planck/rev4/Makefile b/keyboards/planck/rev4/Makefile
index ed09f85a4d..191c6bb664 100644
--- a/keyboards/planck/rev4/Makefile
+++ b/keyboards/planck/rev4/Makefile
@@ -1,5 +1,3 @@
-AUDIO_ENABLE ?= yes           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk
new file mode 100644
index 0000000000..ed09f85a4d
--- /dev/null
+++ b/keyboards/planck/rev4/rules.mk
@@ -0,0 +1,5 @@
+AUDIO_ENABLE ?= yes           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
-- 
cgit v1.2.3


From da226e61261e0c11e678d2086c00b2a45726083e Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sat, 20 Aug 2016 03:22:16 +0300
Subject: Update keyboard readme files with new makefile instructions

---
 keyboards/arrow_pad/readme.md   |  8 +++++---
 keyboards/atomic/readme.md      |  7 ++++---
 keyboards/atreus/readme.md      |  7 ++++---
 keyboards/bantam44/readme.md    |  7 ++++---
 keyboards/clueboard/readme.md   | 26 +++++++++++++-------------
 keyboards/cluecard/readme.md    |  6 +++---
 keyboards/ergodox/readme.md     |  6 +++---
 keyboards/gh60/readme.md        |  8 +++++---
 keyboards/hhkb/readme.md        |  8 +++++---
 keyboards/kc60/readme.md        | 10 ++++++----
 keyboards/kinesis/readme.md     |  6 +++---
 keyboards/planck/readme.md      |  8 +++++---
 keyboards/preonic/readme.md     |  8 +++++---
 keyboards/retro_refit/readme.md |  8 +++++---
 keyboards/s60-x/readme.md       |  4 ++--
 keyboards/tv44/readme.md        |  6 +++---
 16 files changed, 75 insertions(+), 58 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/arrow_pad/readme.md b/keyboards/arrow_pad/readme.md
index 5aa44cce54..2e9a64f2ef 100644
--- a/keyboards/arrow_pad/readme.md
+++ b/keyboards/arrow_pad/readme.md
@@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/arrow_pad fol
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file
diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md
index ab1e7ba1ff..674dcf113b 100644
--- a/keyboards/atomic/readme.md
+++ b/keyboards/atomic/readme.md
@@ -13,13 +13,14 @@ Download or clone the whole firmware and navigate to the keyboards/atomic folder
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md
index 734f58f0f0..a4077668e3 100644
--- a/keyboards/atreus/readme.md
+++ b/keyboards/atreus/readme.md
@@ -174,13 +174,14 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md
index 89d7f9d053..462f67c124 100644
--- a/keyboards/bantam44/readme.md
+++ b/keyboards/bantam44/readme.md
@@ -12,13 +12,14 @@ Download or clone the whole firmware and navigate to the keyboards/Bantam44 fold
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file
diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md
index 6c29c09eca..4a76e2908c 100644
--- a/keyboards/clueboard/readme.md
+++ b/keyboards/clueboard/readme.md
@@ -31,36 +31,36 @@ If you would like to use one of the alternative keymaps, or create your own, see
 
 ## Clueboard 1.0
 
-If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `SUBPROJECT=rev1` to your make command, like this:
+If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this:
 
 ```
-$ make SUBPROJECT=rev1
+$ make rev1
 ```
 
 And when flashing your keyboard:
 
 ```
-$ make SUBPROJECT=rev1 dfu
+$ make rev1-dfu
 ```
 
-If you are flashing an alternative layout to your rev1, include both `SUBPROJECT=rev1` and `KEYMAP=<keymap>` in your command, for example when flashing max:
+If you are flashing an alternative layout to your rev1, include both `rev1` and `<keymap>` in your command, for example when flashing max:
 
 ```
-$ make SUBPROJECT=rev1 KEYMAP=max dfu
+$ make rev1-max-dfu
 ```
 
 ## Alternate Keymaps
 
-There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `KEYMAP=<keymap>` to your command:
+There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `<keymap>` to your command:
 
 ```
-$ make KEYMAP=skully
+$ make skully
 ```
 
-And when flashing your keyboard, put `KEYMAP=<keymap>` between "make" and "dfu":
+And when flashing your keyboard, put `<keymap>` between "make" and "dfu":
 
 ```
-$ make KEYMAP=skully dfu
+$ make skully-dfu
 ```
 
 ### Notable Layouts
@@ -76,15 +76,15 @@ These layouts are notable for one reason or another. If you are looking for idea
 There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend:
 
 * Copy `[keymaps/default](keymaps/default/)` to `keymaps/<your_layout>`.
-* Compile the firmware (`$ make KEYMAP=<your_layout>`)
-* Flash the firmware (`$ make KEYMAP=<your_layout> dfu`)
+* Compile the firmware (`$ make <your_layout>`)
+* Flash the firmware (`$ make <your_layout>-dfu`)
 * Make sure everything works like the default keyboard
 * Modify `keymaps/<your_layout>/readme.md` to tell others about your layout.
 * Modify `keymaps/<your_layout>/keymap.c` to reflect your desired layout.
-* Compile your new custom firmware (`$ make KEYMAP=<your_layout>`)
+* Compile your new custom firmware (`$ make <your_layout>`)
 ** If you have warnings you may flash without fixing them, but something may not work right.
 ** If you have any errors you must fix them before continuing.
-* Flash the firmware (`$ make KEYMAP=<your_layout> dfu`)
+* Flash the firmware (`$ make <your_layout>-dfu`)
 
 ## Share Your Keymap
 
diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md
index ae1afbbfdd..be13fc0171 100644
--- a/keyboards/cluecard/readme.md
+++ b/keyboards/cluecard/readme.md
@@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight
 
 ### Default
 
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
 
 ```
-$ make keymap=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
 
 Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index f81d7cd8df..a96e415def 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -19,10 +19,10 @@ If you are just compiling an existing keymap and don't want to create your own,
 3. Set up a build environment as per the readme.
 4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`)
 5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work.
-6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command.
-7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`.
+6. Compile your firmware by running `make keymap_name`. For example, `make german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `infinity` to the make command like this `make infinity-german`.
+7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make keymap_name-teensy`.
 
-   **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity`
+   **Infinity ErgoDox** - Flash the firmware by running `make infinity-keymap_name-dfu-util`
 8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics.
 
 Good luck! :)
diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md
index 92302d507c..20afb0db07 100644
--- a/keyboards/gh60/readme.md
+++ b/keyboards/gh60/readme.md
@@ -48,13 +48,15 @@ Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c fo
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md
index 39d49b32a1..367c0a08f7 100644
--- a/keyboards/hhkb/readme.md
+++ b/keyboards/hhkb/readme.md
@@ -168,13 +168,15 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md
index acc0df68dc..0639512dd3 100644
--- a/keyboards/kc60/readme.md
+++ b/keyboards/kc60/readme.md
@@ -10,18 +10,20 @@ Download or clone the whole firmware and navigate to the keyboards/kc60 folder.
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
 
 ## WS2812 Support
 ![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg)
 
-Build with WS2812 Support by running `make KEYMAP=ws2812`.
+Build with WS2812 Support by running `make ws2812`.
diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md
index a990f9cb99..79c86581e6 100644
--- a/keyboards/kinesis/readme.md
+++ b/keyboards/kinesis/readme.md
@@ -27,16 +27,16 @@ Depending on which keymap you would like to use, you will have to compile slight
 
 ### Default
 
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
 
 ```
-$ make keymap=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
 
 Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
diff --git a/keyboards/planck/readme.md b/keyboards/planck/readme.md
index f89fdeb931..4b24a690e0 100644
--- a/keyboards/planck/readme.md
+++ b/keyboards/planck/readme.md
@@ -13,15 +13,17 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
 
 ### Notable forks (which some of the keymap files are from)
diff --git a/keyboards/preonic/readme.md b/keyboards/preonic/readme.md
index f0be255a09..10763ee97a 100644
--- a/keyboards/preonic/readme.md
+++ b/keyboards/preonic/readme.md
@@ -13,13 +13,15 @@ Download or clone the whole firmware and navigate to the keyboards/preonic folde
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap, create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/retro_refit/readme.md b/keyboards/retro_refit/readme.md
index b01a1a9ca9..77df861cef 100644
--- a/keyboards/retro_refit/readme.md
+++ b/keyboards/retro_refit/readme.md
@@ -12,13 +12,15 @@ Download or clone the whole firmware and navigate to the keyboards/retro_refit f
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file
diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
index 099d586991..94ce829223 100644
--- a/keyboards/s60-x/readme.md
+++ b/keyboards/s60-x/readme.md
@@ -42,9 +42,9 @@ The recommended programs for flashing your keyboard are [Atmel FLIP](http://www.
 
 ## Building the firmware
 
-To build firmware binary hex file with a certain keymap just run `make` with the `keymap` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
 
-    $ make keymap=[custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
+    $ make [custom|poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
 
 For a more detailed explanation of the build process and the environment setup, see the ["Getting Started" section](/readme.md#getting-started).
 
diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md
index e3b557fe2d..4f691a4ca0 100644
--- a/keyboards/tv44/readme.md
+++ b/keyboards/tv44/readme.md
@@ -13,16 +13,16 @@ Depending on which keymap you would like to use, you will have to compile slight
 
 ### Default
 
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
 
 ```
-$ make keymap=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
 
 Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
-- 
cgit v1.2.3


From a25480b3b58f1fb779fe6d441023eeb3c72811f5 Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Fri, 19 Aug 2016 20:55:50 -0600
Subject: Bringing over changes from default map.

---
 keyboards/ergodox/keymaps/jafo/keymap.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/jafo/keymap.c b/keyboards/ergodox/keymaps/jafo/keymap.c
index c5f21bd82e..4f1428f2ba 100644
--- a/keyboards/ergodox/keymaps/jafo/keymap.c
+++ b/keyboards/ergodox/keymaps/jafo/keymap.c
@@ -1,6 +1,7 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
+#include "version.h"
 
 #define BASE 0 // default layer
 #define SYMB 1 // symbols
@@ -145,9 +146,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       switch(id) {
         case 0:
         if (record->event.pressed) {
-          register_code(KC_RSFT);
-        } else {
-          unregister_code(KC_RSFT);
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
         }
         break;
       }
-- 
cgit v1.2.3


From 9e03517ae51ff30d332accae27469ae3b1b25e73 Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Fri, 19 Aug 2016 21:47:00 -0600
Subject: Restructuring of the ergodox README.

---
 keyboards/ergodox/readme.md | 134 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 105 insertions(+), 29 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index 1c1181dbae..1627883c91 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -1,44 +1,121 @@
-# Infinity on Ubuntu Quickstart
+# Customizing Keymap
 
-To build an Infinity firmware under Ubuntu (tested on 15.10):
+There are external tools for customizing the layout, but those do not use
+the featurs of this qmk firmware.  These sites include:
+
+  - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez
+  - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files
+
+You can also find an existing firmware that you like, for example from:
+
+  - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/)
+
+This qmk firmware also provides the ability to customize keymaps, but requires
+a toolchain to build the firmware.  See below for instructions on building
+firmware and customizing keymaps.
+
+# Customizing Keymaps
+
+There are many existing keymaps in the "keymaps" directory.  If you just want
+to use one of them, you don't need to modify keymaps and can just build and
+flash the firmware as described below.  These directories each have a
+"readme.md" file which describe them.
+
+If none of the existing keymaps suit you, you can create your own custom
+keymap.  This will require some experience with coding.  Follow these steps
+to customize a keymap:
+
+  - Read the [qmk firmware README](https://github.com/jackhumbert/qmk_firmware) from top to bottom.  Then come back here.  :)
+
+  - Clone the qmk_firmware repository
+
+  - Set up your build environment (see below).
+
+  - Make a new directory under "keymaps" to hold your customizations.
+
+  - Copy an existing keymap that is close to what you want, such as
+    "keymaps/default/keymap.c".
+
+  - Use an editor to modify the new "keymap.c".  See "Finding the keycodes you
+    need" below).  Try to edit the comments as well, so the "text graphics"
+    represent your layout correctly.
+
+  - Compile your new firmware (see below)
+
+  - Flash your firmware (see below)
+
+  - Test the changes.
+
+  - Submit your keymap as a pull request to the qmk_firmware repository so
+    others can use it.  You will want to add a "readme.md" that describes the
+    keymap.
+
+# Build Dependencies
+
+Before you can build, you will need the build dependencies.  There is a script
+to try to do this for Linux:
 
   - Run the `util/install_dependencies.sh` script as root.
-  - Check out the submodules with `git submodule update --init --recursive`
-  - Go into the ErgoDox directory with `cd keyboards/ergodox`
+
+For the Infinity, you need the chibios submodules to be checked out or you
+will receive errors about the build process being unable to find the chibios
+files.  Check them out with:
+
+  - Go to the top level repo directory and run: `git submodule update --init --recursive`
+
+# Flashing Firmware
+
+## ErgoDox Ez
+
+The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html).
+
+Linux users need to modify udev rules as described on the Teensy Linux page.
+Some distributions provide a binary, maybe called `teensy-loader-cli`).
+
+To flash the firmware:
+
+  - Build the firmware with `make keymap=keymapname`, for example `make
+    keymap=default`
+
+  - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
+    `ergodox_ez_default.hex`
+
+  - Start the teensy loader.
+
+  - Load the .hex file into it.
+
+  - Press the Reset button by inserting a paperclip gently into the reset hole
+    in the top right corder.
+
+  - Click the button in the Teensy app to download the firmware.
+
+## ErgoDox Infinity
+
+The Infinity is two completely independent keyboards, and needs to be flashed
+for the left and right halves seperately.  To flash them:
+
+  - Remove the build directory with `rm -rf ../../.build`
+
   - Build the firmware with `make keymap=keymapname subproject=infinity`
-  - Plug in the left hand keyboard only.
-  - Press the program button (back of keyboard, above thumb pad).
-  - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity`
-  - Install the right hand firmware, but I haven't figured this out yet.
 
-# Getting started
+  - Plug in the left hand keyboard only.
 
-There are two main ways you could customize the ErgoDox (EZ and Infinity)
+  - Press the program button (back of keyboard, above thumb pad).
 
-## The Easy Way: Use an existing firmware file and just flash it (ErgoDox EZ only)
+  - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity`
 
-1. Download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). Some Linux distributions already provide a binary (may be called `teensy-loader-cli`), so you may prefer to use this.
-2. Find a firmware file you like. There are [dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/) you can browse and download. You can also use the [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) to create a firmware Hex file you like.
-3. Download the firmware file
-4. Connect the keyboard, press its Reset button (gently insert a paperclip into the hole in the top-right corner) and flash it using the Teensy loader you installed on step 1 and the firmware you downloaded.
+  - Remove the left-hand build with `rm -rf ../../.build`
 
-## More technical: compile an existing keymap, or create your own totally custom firmware by editing the source files.
+  - Build left hand firmware with `make keymap=keymapname subproject=infinity MASTER=right`
 
-This requires a little bit of familiarity with coding.
-If you are just compiling an existing keymap and don't want to create your own, you can skip step 4, 5 and 8.
+  - Plug in the right hand keyboard only.
 
-1. Go to https://github.com/jackhumbert/qmk_firmware and read the readme at the base of this repository, top to bottom. Then come back here :)
-2. Clone the repository (download it)
-3. Set up a build environment as per the readme.
-4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`)
-5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work.
-6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command.
-7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`.
+  - Press the program button (back of keyboard, above thumb pad).
 
-   **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity`
-8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics.
+  - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity MASTER=right`
 
-Good luck! :)
+More information on the Infinity firmware is available in the [TMK/chibios for
+Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md)
 
 ## Contributing your keymap
 
@@ -49,7 +126,6 @@ The QMK firmware is open-source, so it would be wonderful to have your contribut
 3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :)
 4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout.
 
-
 ## Finding the keycodes you need
 
 Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`.
-- 
cgit v1.2.3


From d98e5ddf30e6ced925e3d4fa705ae5449808074b Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Fri, 19 Aug 2016 21:50:04 -0600
Subject: Tweaks after review.

---
 keyboards/ergodox/readme.md | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index 1627883c91..349a0ce40c 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -1,4 +1,4 @@
-# Customizing Keymap
+# Keymap Options
 
 There are external tools for customizing the layout, but those do not use
 the featurs of this qmk firmware.  These sites include:
@@ -117,7 +117,7 @@ for the left and right halves seperately.  To flash them:
 More information on the Infinity firmware is available in the [TMK/chibios for
 Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md)
 
-## Contributing your keymap
+# Contributing your keymap
 
 The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format.
 
@@ -126,7 +126,7 @@ The QMK firmware is open-source, so it would be wonderful to have your contribut
 3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :)
 4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout.
 
-## Finding the keycodes you need
+# Finding the keycodes you need
 
 Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`.
 
-- 
cgit v1.2.3


From 8f78ba1f739ac585d7b211bab473f6820452bc45 Mon Sep 17 00:00:00 2001
From: Nicholas Keene <git@nicholaskeene.com>
Date: Fri, 19 Aug 2016 23:38:13 -0500
Subject: The Ordinary Layout is boring because all the keys are where you
 expect them to be

---
 keyboards/ergodox/keymaps/ordinary/keymap.c        | 118 ++++++++++-----------
 .../ergodox/keymaps/ordinary/ordinary-base.png     | Bin 76549 -> 98200 bytes
 .../ergodox/keymaps/ordinary/ordinary-media.png    | Bin 96205 -> 123435 bytes
 .../ergodox/keymaps/ordinary/ordinary-special.png  | Bin 68418 -> 68292 bytes
 .../ergodox/keymaps/ordinary/ordinary-special.txt  |  14 +--
 .../ergodox/keymaps/ordinary/ordinary-symbol.png   | Bin 73009 -> 101255 bytes
 .../ergodox/keymaps/ordinary/ordinary-symbol.txt   |  12 +--
 keyboards/ergodox/keymaps/ordinary/readme.md       |  65 +++++-------
 8 files changed, 98 insertions(+), 111 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c
index eda45b7cb3..302c41cc8d 100644
--- a/keyboards/ergodox/keymaps/ordinary/keymap.c
+++ b/keyboards/ergodox/keymaps/ordinary/keymap.c
@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "led.h"
 #include "debug.h"
 #include "action_layer.h"
@@ -31,31 +31,31 @@
  * If you use or modify this layout I would love to hear from you.
  *
  * Details: readme.md
- *          https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary
+ *          https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary
  */
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-/******* Base Layer ********************************************************************************************************
+/******* Base Layer ****************************************************************************************************
  *
- * ,------------------------------------------------------.           ,------------------------------------------------------.
- * | Special `~ |   1  |   2  |   3  |   4  |   5  | ESC  |           |  -   |   6  |   7  |   8  |   9  |   0  | =+ Special |
- * |------------+------+------+------+------+-------------|           |------+------+------+------+------+------+------------|
- * | Media  Tab |   Q  |   W  |   E  |   R  |   T  |   [  |           |  ]   |   Y  |   U  |   I  |   O  |   P  | \|   Media |
- * |------------+------+------+------+------+------|      |           |      |------+------+------+------+------+------------|
- * | Symbol     |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |  ;   | '"  Symbol |
- * |------------+------+------+------+------+------|Shift |           | Tab  |------+------+------+------+------+------------|
- * | Capitals   |   Z  |   X  |   C  |   V  |   B  | -Tab |           |      |   N  |   M  |   ,  |   .  |  /   |   Capitals |
- * `------------+------+------+------+------+-------------'           `-------------+------+------+------+------+------------'
- *      | LCtrl | Meh  |Hyper | LAlt | LGui |                                       | RGui | RAlt | Hyper|  Meh | RCtrl |
- *      `-----------------------------------'                                       `-----------------------------------'
- *                                          ,-------------.           ,-------------.
- *                                          | Home | End  |           | Left | Right|
- *                                   ,------|------|------|           |------+------+------.
- *                                   |      |      | PgUp |           |  Up  |      |      |
- *                                   |Backsp| Del  |------|           |------| Enter| Space|
- *                                   |      |      | PgDn |           | Down |      |      |
- *                                   `--------------------'           `--------------------'
+ * ,------------------------------------------------------.       ,------------------------------------------------------.
+ * | Special `~ |   1  |   2  |   3  |   4  |   5  | ESC  |       |  -   |   6  |   7  |   8  |   9  |   0  | =+ Special |
+ * |------------+------+------+------+------+-------------|       |------+------+------+------+------+------+------------|
+ * | Media  Tab |   Q  |   W  |   E  |   R  |   T  |   [  |       |  ]   |   Y  |   U  |   I  |   O  |   P  | \|   Media |
+ * |------------+------+------+------+------+------|      |       |      |------+------+------+------+------+------------|
+ * | Symbol     |   A  |   S  |   D  |   F  |   G  |------|       |------|   H  |   J  |   K  |   L  |  ;   | '"  Symbol |
+ * |------------+------+------+------+------+------|Shift |       | Tab  |------+------+------+------+------+------------|
+ * | Capitals   |   Z  |   X  |   C  |   V  |   B  | -Tab |       |      |   N  |   M  |   ,  |   .  |  /   |   Capitals |
+ * `------------+------+------+------+------+-------------'       `-------------+------+------+------+------+------------'
+ *      | LCtrl | Meh  |Hyper | LAlt | LGui |                                   | RGui | RAlt | Hyper|  Meh | RCtrl |
+ *      `-----------------------------------'                                   `-----------------------------------'
+ *                                          ,-------------.       ,-------------.
+ *                                          | Home | End  |       | Left | Right|
+ *                                   ,------|------|------|       |------+------+------.
+ *                                   |      |      | PgUp |       |  Up  |      |      |
+ *                                   |Backsp| Del  |------|       |------| Enter| Space|
+ *                                   |      |      | PgDn |       | Down |      |      |
+ *                                   `--------------------'       `--------------------'
  */
 [BASE] = KEYMAP(
 // left hand
@@ -67,37 +67,37 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                          ,KC_HOME,KC_END
                                                  ,KC_PGUP
                                  ,KC_BSPC,KC_DEL ,KC_PGDN
-                                                                      // right hand
-                                                                     ,KC_MINS ,KC_6   ,KC_7   ,KC_8   ,KC_9    ,KC_0     ,F(RSpec)
-                                                                     ,KC_RBRC ,KC_Y   ,KC_U   ,KC_I   ,KC_O    ,KC_P     ,F(RMdia)
-                                                                              ,KC_H   ,KC_J   ,KC_K   ,KC_L    ,KC_SCLN  ,F(RSymb)
-                                                                     ,KC_TAB  ,KC_N   ,KC_M   ,KC_COMM,KC_DOT  ,KC_SLSH  ,KC_RSFT
-                                                                                      ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH   ,KC_RCTL
-                                                                     ,KC_LEFT ,KC_RGHT
-                                                                     ,KC_UP
-                                                                     ,KC_DOWN ,KC_ENT ,KC_SPC
+                                                                  // right hand
+                                                                 ,KC_MINS ,KC_6   ,KC_7   ,KC_8   ,KC_9    ,KC_0     ,F(RSpec)
+                                                                 ,KC_RBRC ,KC_Y   ,KC_U   ,KC_I   ,KC_O    ,KC_P     ,F(RMdia)
+                                                                          ,KC_H   ,KC_J   ,KC_K   ,KC_L    ,KC_SCLN  ,F(RSymb)
+                                                                 ,KC_TAB  ,KC_N   ,KC_M   ,KC_COMM,KC_DOT  ,KC_SLSH  ,KC_RSFT
+                                                                                  ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH   ,KC_RCTL
+                                                                 ,KC_LEFT ,KC_RGHT
+                                                                 ,KC_UP
+                                                                 ,KC_DOWN ,KC_ENT ,KC_SPC
     ),
 
-/******* Symbols Layer *****************************************************************************************************
+/******* Symbols Layer *************************************************************************************************
  *
- * ,-----------------------------------------------------.           ,-----------------------------------------------------.
- * |           |  F1  |  F2  |  F3  |  F4  |  F5  | Esc  |           |  -   |  F6  |  F7  |  F8  |  F9  |  F10 |           |
- * |-----------+------+------+------+------+-------------|           |------+------+------+------+------+------+-----------|
- * |           |   !  |   @  |   {  |   }  |   &  |  <   |           |  >   |   |  |   7  |   8  |   9  |   /  |           |
- * |-----------+------+------+------+------+------|      |           |      |------+------+------+------+------+-----------|
- * |           |   #  |   $  |   (  |   )  |   `  |------|           |------|   /  |   4  |   5  |   6  |   *  |           |
- * |-----------+------+------+------+------+------| Tab  |           | Shift|------+------+------+------+------+-----------|
- * |           |   %  |   ^  |   [  |   ]  |   ~  |      |           |  -Tab|   \  |   1  |   2  |   3  |   -  |           |
- * `-----------+------+------+------+------+-------------'           `-------------+------+------+------+------+-----------'
- *     | LCtrl | Meh  |Hyper | LAlt | LGui |                                       |   0  |   .  |   =  |   +  |  Ent  |
- *     `-----------------------------------'                                       `-----------------------------------'
- *                                         ,-------------.           ,-------------.
- *                                         | Left | Right|           | Home | End  |
- *                                  ,------|------|------|           |------+------+------.
- *                                  |      |      |  Up  |           | PgUp |      |      |
- *                                  |Space |Enter |------|           |------|BackSp| Del  |
- *                                  |      |      | Down |           | PgDn |      |      |
- *                                  `--------------------'           `--------------------'
+ * ,-----------------------------------------------------.       ,-----------------------------------------------------.
+ * |           |  F1  |  F2  |  F3  |  F4  |  F5  | Esc  |       |  -   |  F6  |  F7  |  F8  |  F9  |  F10 |           |
+ * |-----------+------+------+------+------+-------------|       |------+------+------+------+------+------+-----------|
+ * |           |   !  |   @  |   {  |   }  |   &  |  <   |       |  >   |   |  |   7  |   8  |   9  |   /  |           |
+ * |-----------+------+------+------+------+------|      |       |      |------+------+------+------+------+-----------|
+ * |           |   #  |   $  |   (  |   )  |   `  |------|       |------|   /  |   4  |   5  |   6  |   *  |           |
+ * |-----------+------+------+------+------+------| Tab  |       | Shift|------+------+------+------+------+-----------|
+ * |           |   %  |   ^  |   [  |   ]  |   ~  |      |       |  -Tab|   \  |   1  |   2  |   3  |   -  |           |
+ * `-----------+------+------+------+------+-------------'       `-------------+------+------+------+------+-----------'
+ *     | LCtrl | Meh  |Hyper | LAlt | LGui |                                   |   0  |   .  |   =  |   +  |  Ent  |
+ *     `-----------------------------------'                                   `-----------------------------------'
+ *                                         ,-------------.       ,-------------.
+ *                                         | Left | Right|       | Home | End  |
+ *                                  ,------|------|------|       |------+------+------.
+ *                                  |      |      |  Up  |       | PgUp |      |      |
+ *                                  |Space |Enter |------|       |------|BackSp| Del  |
+ *                                  |      |      | Down |       | PgDn |      |      |
+ *                                  `--------------------'       `--------------------'
  */
 [SYMB] = KEYMAP(
 // left hand
@@ -105,19 +105,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ,KC_TRNS ,KC_EXLM ,KC_AT   ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM)
 ,KC_TRNS ,KC_HASH ,KC_DLR  ,KC_LPRN ,KC_RPRN ,KC_GRV
 ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB
-,KC_LCTL   ,KC_MEH ,KC_HYPR,KC_LALT ,KC_LGUI
+,KC_LCTL ,KC_MEH  ,KC_HYPR ,KC_LALT ,KC_LGUI
                                              ,KC_LEFT ,KC_RGHT
                                                       ,KC_UP
                                     ,KC_SPC  ,KC_ENT  ,KC_DOWN
-                                                                     // right hand
-                                                                     ,KC_MINS     ,KC_F6   ,KC_F7 ,KC_F8  ,KC_F9 ,KC_F10  ,KC_TRNS
-                                                                     ,LSFT(KC_DOT),KC_PIPE ,KC_7  ,KC_8   ,KC_9  ,KC_SLSH ,KC_TRNS
-                                                                                  ,KC_SLSH ,KC_4  ,KC_5   ,KC_6  ,KC_ASTR ,KC_TRNS
-                                                                     ,LSFT(KC_TAB),KC_BSLS ,KC_1  ,KC_2   ,KC_3  ,KC_MINS ,KC_TRNS
-                                                                                           ,KC_0  ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT
-                                                                     ,KC_HOME     ,KC_END
-                                                                     ,KC_PGUP
-                                                                     ,KC_PGDN     ,KC_BSPC ,KC_DEL
+                                                                 // right hand
+                                                                 ,KC_MINS     ,KC_F6   ,KC_F7 ,KC_F8  ,KC_F9 ,KC_F10  ,KC_TRNS
+                                                                 ,LSFT(KC_DOT),KC_PIPE ,KC_7  ,KC_8   ,KC_9  ,KC_SLSH ,KC_TRNS
+                                                                              ,KC_SLSH ,KC_4  ,KC_5   ,KC_6  ,KC_ASTR ,KC_TRNS
+                                                                 ,LSFT(KC_TAB),KC_BSLS ,KC_1  ,KC_2   ,KC_3  ,KC_MINS ,KC_TRNS
+                                                                                       ,KC_0  ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT
+                                                                 ,KC_HOME     ,KC_END
+                                                                 ,KC_PGUP
+                                                                 ,KC_PGDN     ,KC_BSPC ,KC_DEL
 ),
 
 /******* Media Layer *******************************************************************************************************
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png
index 7f8c1b5c1f..831db4f5d3 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png
index bb78b7c7a8..5ff3f53385 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png
index 399c5fc754..4fb9d1d166 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt
index 6f9d8ef047..97f40f9dbc 100644
--- a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt
+++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt
@@ -1,21 +1,21 @@
 [{x:3.5,a:7},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"_\n\n\n\n\n\n-"],
 [{y:-0.875,x:5.5,a:7},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""],
-[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"],
+[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#ff8500"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"],
 [{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"{\n["],
 [{y:-0.875,x:5.5,a:7},"",{h:1.5},"",{x:4.5,h:1.5},"",""],
-[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nLock"],
-[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""],
+[{y:-0.875,c:"#c6c600",t:"#002299",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
 [{y:-0.875,x:5.5},"",{x:6.5},""],
-[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"],
-[{y:-0.625,x:6.5,c:"#cccccc",a:7,h:1.5},"",{x:4.5,h:1.5},""],
+[{y:-0.875,c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"],
+[{y:-0.625,x:6.5,c:"#cccccc",t:"#000000",a:7,h:1.5},"",{x:4.5,h:1.5},""],
 [{y:-0.75,x:3.5},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
 [{y:-0.875,x:5.5},"",{x:6.5},""],
-[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"],
-[{y:-0.375,x:3.5,c:"#cccccc",a:7},"",{x:10.5},""],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
 [{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
 [{y:-0.75,x:0.5},"","",{x:14.5},"",""],
 [{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""],
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png
index 48cda5f6b6..dd90863295 100644
Binary files a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png and b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png differ
diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt
index 5c5bc155aa..001bf370d8 100644
--- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt
+++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt
@@ -1,11 +1,11 @@
 [{x:3.5,c:"#99de2a"},"F3",{x:10.5},"F8"],
 [{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"],
 [{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#bbddbb"},"_\n\n\n\n\n\n-",{c:"#99de2a"},"F6"],
-[{y:-0.875,c:"#dddd77",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#dddd77",w:1.5},"\n\nShift\n\n\n\n\nLock"],
+[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"],
 [{y:-0.375,x:3.5,c:"#bbddbb"},"{",{x:10.5,c:"#89b087"},"8"],
 [{y:-0.875,x:2.5,c:"#bbddbb"},"@",{x:1},"}",{x:8.5,c:"#89b087"},"7",{x:1},"9"],
 [{y:-0.875,x:5.5,c:"#bbddbb"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"],
-[{y:-0.875,c:"#dddd77",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#dddd77",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
+[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#c6c600",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
 [{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"(",{x:10.5,c:"#89b087"},"5"],
 [{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"],
 [{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"],
@@ -14,10 +14,10 @@
 [{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"],
 [{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"],
 [{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"],
-[{y:-0.875,c:"#dddd77",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#dddd77",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
-[{y:-0.375,x:3.5,c:"#c6c600",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."],
-[{y:-0.875,x:2.5,c:"#c6c600"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="],
-[{y:-0.75,x:0.5,c:"#c6c600"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."],
+[{y:-0.875,x:2.5,c:"#dddd77"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="],
+[{y:-0.75,x:0.5,c:"#dddd77"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"],
 [{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Left","Right"],
 [{h:2},"Space",{h:2},"Enter","Up"],
 [{x:2},"Down"],
diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md
index 21d40477ca..9c5294c5be 100644
--- a/keyboards/ergodox/keymaps/ordinary/readme.md
+++ b/keyboards/ergodox/keymaps/ordinary/readme.md
@@ -10,66 +10,51 @@ no rights reserved, use for any purposes, credit me if you are a nice person
 
 ## The Base Layout ##
 
-* The light blue keys are modifiers: traditional Control, Option, and Command keys, plus Hyper and Meh
-* The dark blue keys are Shift keys: Capitals Shift (traditional shift), Symbol Shift, and Media Shift; plus a Shift Lock key
-* Several dark blue keys double for entry of characters which would typically be in those locations
-* The turquoise keys are text navigation and manipulation
-* The red keys is Escape and it is always found in that location no matter what
+* *White Keys* are all the normal characters and symbols in all the normal locations (except for the brackets).
+* *Modifier Keys* are light yellow and in the traditional location: Control, Option, Command, plus Hyper and Meh.
+* *Shift Keys* are dark yellow, found on the outsides of the keyboard. Capitals Shift (traditional shift) is found in the usual place and above that is found Symbol Shift, Media Shift, and Special Shift (Shift Lock).
+* Several of the shift keys double for entry of characters which would typically be in those locations.
+* *Thumb Keys* shown in orange are for text navigation and manipulation.
+* *Escape* is red and it is always found in that location no matter what.
 
 ![Ordinary base layout](ordinary-base.png)
 
-This layout puts the modifier keys along the bottom of the keyboard where they are on most keyboards. They are in the regular order, with the addition of Hyper and Meh keys. The modifier keys are all in the same place on all layers, although some layers also assign symbols on those buttons. On the outside edges are the Shift keys. The traditional shift key is called Capitals Shift and it is in the normal location. Above that are Symbols Shift and Media Shift. Each Shift key momentarily switches the layout to that layer, and if you use the Shift Lock button you can lock the layout to that layer.
-
-Touch typists will also find tilde, tab, equals/plus, slash/pipe, and quote/double-quote sharing space on those Shift keys where they would probably be on a common keyboard. Other than the turquoise keys the only buttons which move to new locations are the Brackets and Dash and Escape. Most touch typists dont touch-type brackets or dash anyway so only Escape really requires retraining of muscle memory, and see below for the Special Escape Sequence.
-
-The four big turquoise keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another.
+The four big orane keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another.
 
 The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code.
 
 ## The Symbols Layer ##
 
-* The light green keys are the eponymous symbols
-* The bright green keys are F-Keys
-* The dark green keys constitute a number pad
-* The turquoise keys are the *reverse* of the turquoise keys on the base layer
+* *Symbols* shown in light green. All kinds of brackets are available on this layer. Ampersand and Pipe justapose each other. Pipe, slash, and backslash are arranged in a column.
+* *F-Keys* are bright green and overlay the row of numerals.
+* *Number pad* in dark green under the right hand includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads so that NumLock is not needed.
+* *Thumb keys* on this layer are the *reverse* of the orange keys on the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be.
 
 ![Ordinary symbol layout](ordinary-symbol.png)
 
-The Ergodox EZ ships with the "Coder Layer" which I like to call the Symbols layer. There are some significant improvements in The Ordinary Layout over the default layout.
-
-The symbol keys are mostly the same as on the default layout, which did a good job in this regard, but with a few enhancements:
-
-* Angle brackets on this layer mean that curly, square, and angle brackets are all available on different layers of the same two buttons. Also, they mean that all kinds of brackets, including parentheses, are available on both the Base and Symbols layers.
-* The slash, backslash, and pipe characters are grouped together as a memory aid.
-* The & and | symbols are juxtaposed as a memory aid
-
-The number pad area here, in green, includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads, because this layout does not use a Num Lock key to switch the buttons between numeric keycodes and navigational keycodes. See the explanation in The Media Layout section about navigation using these same buttons.
-
-Finally, consider the turquoise text-nav keys. Here in the Symbols layer, these are *reversed* from the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be.
+The Symbols Layer is based on the Coder Layer from the default Ergodox EZ layout. I slightly rearranged the symbols, added some symbols, expanded the number pad, and straightened out the F-Keys. It's very handy to have the symbols directly underneath the normal typing keys.
 
 ## The Media Layer ##
 
-* The dark orange keys on the left move the mouse cursor
-* The dark orange keys on the right move the text cursor
-* The light orange keys are for scrolling and paging
-* The bright green keys are more F-keys
-* The dark yellow keys signal Web and Audio applications
-* The light yellow keys signal the operating system
+* *Mouse Cursor Keys* are under the left hand, shown in dark blue. Diagonal keys won't automatically repeat unless combined with other keys. Buttons to left- middle- and right-click the mouse are also featured.
+* *Text Cursor Keys* are under the right hand, shown in dark blue. They overlay the numberpad from the Symbols Layer, such that in the Media Layer the same keys can be used as if they were a number pad in navigational mode (Num Lock off). For instance, in traditional number pads the '3' key became 'Page Down', and so it is here. This means a user can do text navigation without moving either hand.
+* *Scrolling and Paging* keys are shown in light blue and have some useful redundancy across the layout.
+* Higher-order *F-Keys* are shown in bright green overylaying the numerals.
+* *Application Keys* to control web browsers and audio players are dark purple but don't get too excited because these have weak support on operating systems I've looked at. Good luck.
+* The light purple keys are various operating system keys such as NumLock and Mute and a button to navigate to My Computer (usually your home dir).
 * The dark gray keys do nothing in case you bump them by accident
 
 ![Ordinary media layout](ordinary-media.png)
 
-This layer was inspired by the Media layer on the Ergodox EZ but takes it farther. The Fingerworks TouchStream keyboard had a very useful feature for controlling the text cursor easily and this layer does something similar. The left hand can move the mouse, the right hand moves the text cursor, in all four directions, in small or large increments. This greatly enhances navigation in text documents.
+This layer is a substantial extension of the Media layer on the Ergodox EZ default layout. The Fingerworks TouchStream keyboard had a very useful feature for controlling the text cursor easily and this layer does something similar. The left hand can move the mouse, the right hand moves the text cursor, in all four directions, in small or large increments. This greatly enhances navigation in text documents.
 
-Moreover, the orange keys on the right overlay the numberpad from the Symbols Layer, such that in the Media Layer the same keys can be used as if they were a number pad in navigational mode (Num Lock off). For instance, in traditional number pads the '3' key became 'Page Down', and so it is here. This means a user can do text navigation without moving either hand.
-
-Alas, the yellow keys have at best spotty success with common software. Good luck with those but don't expect too much.
+Keys to directly interact with the operating system are also found on this layer, such as volume and shutdown.
 
 ## Switching Between Layers ##
 
 In addition to Symbols and Media there is the Capitals layer which is exactly the same as pressing the shift key. Each layer is accessed by a shift key on each edge of the keyboard and corresponds to one of the three LEDs on the keyboard: Capitals (red), Symbols (green), Media (blue). The color of a layer illuminates when the layer is active.
 
-Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. Lock the shift keys using the Shift Lock button, which is the same as the Special Shift button. You can press the shift and shift-lock buttons in either order.
+Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. Lock the shift keys using the Shift Lock button, which is the same as the Special Shift button.
 
 Multiple layers can be turned on at once. The Capitals layer will affect characters on other layers to capitalize. Other layers, however, don't 'mix': Symbols blankets the base layout; Media blankets Symbols.
 
@@ -77,6 +62,8 @@ Multiple layers can be turned on at once. The Capitals layer will affect charact
 
 ![Ordinary special layout](ordinary-special.png)
 
+The Special Shift layer is mostly used to lock the shift keys but in order to make this layout more _ordinary_ there are a few special sequences which put some keys near their most common traditional locations.
+
 ### Escape ###
 
 The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape.
@@ -85,7 +72,7 @@ The Ordinary layout offers as a consolation prize a Special sequence for Escape:
 
 ### Backspace ###
 
-At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence, using the 0 key, to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times.
+At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence using the 0 key to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times.
 
 ### Other Characters ###
 
@@ -93,11 +80,11 @@ The Escape and Backspace special sequences are so useful why not have a few more
 
 ****
 
-The Ordinary Layout for the Ergodox EZ keyboard, v4
+The Ordinary Layout for the Ergodox EZ keyboard, v4.20
 
 Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com
 
 No rights reserved. This software is in the public domain. Credit me if you are friendly but if you're a jerk don't bother.
 
 Details: readme.md
-         https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary
+         https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary
-- 
cgit v1.2.3


From 6a9a6b9477749d9fc80cad8f026140b52715b5ec Mon Sep 17 00:00:00 2001
From: Nicholas Keene <git@nicholaskeene.com>
Date: Fri, 19 Aug 2016 23:44:08 -0500
Subject: The Ordinary Layout is boring because all the keys are where you
 expect them to be

---
 keyboards/ergodox/keymaps/ordinary/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md
index 9c5294c5be..820b80b454 100644
--- a/keyboards/ergodox/keymaps/ordinary/readme.md
+++ b/keyboards/ergodox/keymaps/ordinary/readme.md
@@ -19,7 +19,7 @@ no rights reserved, use for any purposes, credit me if you are a nice person
 
 ![Ordinary base layout](ordinary-base.png)
 
-The four big orane keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another.
+The four big orange keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another.
 
 The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code.
 
-- 
cgit v1.2.3


From aff792545d70fbf281e64757b74d0ed776187bb2 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Fri, 19 Aug 2016 22:30:34 -0700
Subject: Changed my keymap to match normal keymaps.

---
 keyboards/ergodox/keymaps/xyverz/keymap.c | 512 ++++++++++++------------------
 1 file changed, 198 insertions(+), 314 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
index 397c8566f5..5927de33fb 100644
--- a/keyboards/ergodox/keymaps/xyverz/keymap.c
+++ b/keyboards/ergodox/keymaps/xyverz/keymap.c
@@ -45,331 +45,215 @@ extern keymap_config_t keymap_config;
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-[_DV] = {  // layer 0 : Dvorak
-/*  
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
- * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
- * | LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | LCtr | LAlt |       | Ralt | RCtr |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      | Home |       | PgUp |      |      |
- *                                 | BkSp | Del  |------|       |------| Enter| Space|
- *                                 |      |      | End  |       | PgDn |      |      |
- *                                 `--------------------'       `--------------------'
+/* Layer 0 : Dvorak
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * |   ]    |   1  |   2  |   3  |   4  |   5  | ESC  | | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | Tab    |   '  |   ,  |   .  |   P  |   Y  |      | |      |   F  |   G  |   C  |   R  |   L  |   \    |
+ * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   O  |   E  |   U  |   I  |------| |------|   D  |   H  |   T  |   N  |   S  |   -    |
+ * |--------+------+------+------+------+------| _MD  | | _KP  |------+------+------+------+------+--------|
+ * | LShift |   ;  |   Q  |   J  |   K  |   X  |      | |      |   B  |   M  |   W  |   V  |   Z  | RShift |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                             |  Up  |  Dn  |   /  |   =  | RGUI |
+ *   `----------------------------------'                             `----------------------------------'
+ *                                      ,-------------. ,-------------.
+ *                                      | LCTL | LALT | | RALT | RCTL |
+ *                               ,------|------|------| |------+------+------.
+ *                               |      |      | Home | | PgUp |      |      |
+ *                               | BkSp | Del  |------| |------| Enter| Space|
+ *                               |      |      | End  | | PgDn |      |      |
+ *                               `--------------------' `--------------------'
  *
  */
-#ifdef SUBPROJECT_infinity // Infinity Ergodox
-	// left hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME},
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END },
-	{KC_6,    MO(_KP), XXXXXXX, MO(_MD), KC_DEL },
-	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_BSPC},
-	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT},
-	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT},
-	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS },
-	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV },
-	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI},
-
-	//Right Hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP},
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN},
-	{KC_ESC,  MO(_MD), XXXXXXX, MO(_KP), KC_ENT },
-	{KC_6,    KC_F,    KC_D,    KC_B,    KC_SPC },
-	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP  },
-	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN},
-	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH},
-	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL },
-	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI}
-#else // Ergodox and Ergodox EZ 
+[_DV] = KEYMAP(
         // left hand
-	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX},
-	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV,  KC_END },
-	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS,  KC_DEL },
-	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT, KC_BSPC},
-	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT, KC_HOME},
-	{KC_5,    KC_Y,    KC_I,    KC_X,    XXXXXXX, KC_LCTL},
-	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT},
-
-	// right hand
-	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT},
-	{KC_6,    KC_F,    KC_D,    KC_B,    XXXXXXX, KC_RCTL},
-	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP,   KC_PGUP},
-	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN, KC_SPC },
-	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH, KC_ENT },
-	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL,  KC_PGDN},
-	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, XXXXXXX}
-#endif
-  },
-
-
-[_QW] = {  // layer 1 : QWERTY
-/* 
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
- * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
- * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | LCtr | LAlt |       | Ralt | RCtr |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      | Home |       | PgUp |      |      |
- *                                 | BkSp | Del  |------|       |------| Enter| Space|
- *                                 |      |      | End  |       | PgDn |      |      |
- *                                 `--------------------'       `--------------------'
+        KC_RBRC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_ESC,
+        KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    XXXXXXX,
+        KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,
+        KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    MO(_MD),
+        KC_LGUI, KC_GRV,  KC_INS,  KC_LEFT, KC_RGHT,
+                                            KC_LCTL, KC_LALT,
+                                                     KC_HOME,
+                                   KC_BSPC, KC_DEL,  KC_END,
+        // right hand
+        KC_ESC,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC,
+        XXXXXXX, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSLS,
+                 KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+        MO(_KP), KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                          KC_UP,   KC_DOWN, KC_SLSH, KC_EQL,  KC_RGUI,
+        KC_RALT, KC_RCTL,
+        KC_PGUP,
+        KC_PGDN, KC_ENT,  KC_SPC
+  ),
+
+
+/* Layer 1: QWERTY
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  | | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   E  |   R  |   T  |      | |      |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   S  |   D  |   F  |   G  |------| |------|   H  |   J  |   K  |   L  |   ;  |   '    |
+ * |--------+------+------+------+------+------| _MD  | | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      | |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                             |  Up  |  Dn  |   /  |   =  | RGUI |
+ *   `----------------------------------'                             `----------------------------------'
+ *                                      ,-------------. ,-------------.
+ *                                      | LCTL | LALT | | RALT | RCTL |
+ *                               ,------|------|------| |------+------+------.
+ *                               |      |      | Home | | PgUp |      |      |
+ *                               | BkSp | Del  |------| |------| Enter| Space|
+ *                               |      |      | End  | | PgDn |      |      |
+ *                               `--------------------' `--------------------'
  */
-#ifdef SUBPROJECT_infinity // Infinity Ergodox
-	// left hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME},
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END },
-	{KC_6,    MO(_KP), XXXXXXX, MO(_MD), KC_DEL },
-	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_BSPC},
-	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT},
-	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT},
-	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS },
-	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV },
-	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI},
-
-	//Right Hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP},
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN},
-	{KC_ESC,  MO(_MD), XXXXXXX, MO(_KP), KC_ENT },
-	{KC_6,    KC_F,    KC_D,    KC_B,    KC_SPC },
-	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP  },
-	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN},
-	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH},
-	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL },
-	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI}
-#else // Ergodox and Ergodox EZ 
+[_QW] = KEYMAP(
         // left hand
-	{KC_EQL,  KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, XXXXXXX},
-	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
-	{KC_2,    KC_W,    KC_S,    KC_X,    KC_INS,  KC_DEL },
-	{KC_3,    KC_E,    KC_D,    KC_C,    KC_LEFT, KC_BSPC},
-	{KC_4,    KC_R,    KC_F,    KC_V,    KC_RGHT, KC_HOME},
-	{KC_5,    KC_T,    KC_G,    KC_B,    XXXXXXX, KC_LCTL},
-	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT},
-
-	// right hand
-	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT},
-	{KC_6,    KC_Y,    KC_H,    KC_N,    XXXXXXX, KC_RCTL},
-	{KC_7,    KC_U,    KC_J,    KC_M,    KC_UP,   KC_PGUP},
-	{KC_8,    KC_I,    KC_K,    KC_COMM, KC_DOWN, KC_SPC },
-	{KC_9,    KC_O,    KC_L,    KC_DOT,  KC_LBRC, KC_ENT },
-	{KC_0,    KC_P,    KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN},
-	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX}
-#endif
-  },
-
-
-[_CM] = {  // layer 2 : Colemak
-/* 
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
- * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
- * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | LCtr | LAlt |       | Ralt | RCtr |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      | Home |       | PgUp |      |      |
- *                                 | BkSp | Del  |------|       |------| Enter| Space|
- *                                 |      |      | End  |       | PgDn |      |      |
- *                                 `--------------------'       `--------------------'
+        KC_EQL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LEFT,
+        KC_DELT, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    XXXXXXX,
+        KC_BSPC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    MO(_MD),
+        KC_LGUI, KC_GRV,  KC_INS,  KC_LEFT, KC_RGHT,
+                                            KC_LCTL, KC_LALT,
+                                                     KC_HOME,
+                                   KC_BSPC, KC_DEL,  KC_END,
+        // right hand
+        KC_ESC,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+        XXXXXXX, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+                 KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        MO(_KP), KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                          KC_UP,   KC_DOWN, KC_LBRC, KC_RBRC, KC_RGUI,
+        KC_LALT, KC_LCTL,
+        KC_PGUP,
+        KC_PGDN, KC_ENT, KC_SPC
+  ),
+
+
+/* Layer 2 : Colemak
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  | | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   F  |   P  |   G  |      | |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
+ * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
+ * | BkSpc  |   A  |   R  |   S  |   T  |   D  |------| |------|   H  |   N  |   E  |   I  |   O  |   '    |
+ * |--------+------+------+------+------+------| _MD  | | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      | |      |   K  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                             |  Up  |  Dn  |   /  |   =  | RGUI |
+ *   `----------------------------------'                             `----------------------------------'
+ *                                      ,-------------. ,-------------.
+ *                                      | LCTL | LALT | | RALT | RCTL |
+ *                               ,------|------|------| |------+------+------.
+ *                               |      |      | Home | | PgUp |      |      |
+ *                               | BkSp | Del  |------| |------| Enter| Space|
+ *                               |      |      | End  | | PgDn |      |      |
+ *                               `--------------------' `--------------------'
  */
-#ifdef SUBPROJECT_infinity // Infinity Ergodox
-	// left hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT, KC_HOME},
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL, KC_END },
-	{KC_6,    MO(_KP), XXXXXXX, MO(_MD), KC_DEL },
-	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_BSPC},
-	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT},
-	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT},
-	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS },
-	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV },
-	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI},
-
-	//Right Hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RALT, KC_PGUP},
-	{XXXXXXX, XXXXXXX, XXXXXXX, KC_RCTL, KC_PGDN},
-	{KC_ESC,  MO(_MD), XXXXXXX, MO(_KP), KC_ENT },
-	{KC_6,    KC_F,    KC_D,    KC_B,    KC_SPC },
-	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP  },
-	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN},
-	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH},
-	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL },
-	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI}
-#else // Ergodox and Ergodox EZ 
+[_CM] = KEYMAP( 
         // left hand
-	{KC_EQL,  KC_TAB,  KC_BSPC, KC_LSFT, KC_LGUI, XXXXXXX},
-	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
-	{KC_2,    KC_W,    KC_R,    KC_X,    KC_INS,  KC_DEL },
-	{KC_3,    KC_F,    KC_S,    KC_C,    KC_LEFT, KC_BSPC},
-	{KC_4,    KC_P,    KC_T,    KC_V,    KC_RGHT, KC_HOME},
-	{KC_5,    KC_G,    KC_D,    KC_B,    XXXXXXX, KC_LCTL},
-	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_MD), XXXXXXX, KC_LALT},
-
-	// right hand
-	{KC_ESC,  XXXXXXX, XXXXXXX, MO(_KP), XXXXXXX, KC_RALT},
-	{KC_6,    KC_J,    KC_H,    KC_K,    XXXXXXX, KC_RCTL},
-	{KC_7,    KC_L,    KC_N,    KC_M,    KC_UP,   KC_PGUP},
-	{KC_8,    KC_U,    KC_E,    KC_COMM, KC_DOWN, KC_SPC },
-	{KC_9,    KC_Y,    KC_I,    KC_DOT,  KC_LBRC, KC_ENT },
-	{KC_0,    KC_SCLN, KC_O,    KC_SLSH, KC_RBRC, KC_PGDN},
-	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, XXXXXXX}
-#endif
-  },
-
-
-[_MD] = { // layer 3 : Media layer
-/* 
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      | PrSc | ScLk | Paus |      |      |           |      |      | Mute | Vol- | Vol+ |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |      |      |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
+        KC_EQL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LEFT,
+        KC_DELT, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    XXXXXXX,
+        KC_BSPC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    MO(_MD),
+        KC_LGUI, KC_GRV,  KC_INS,  KC_LEFT, KC_RGHT,
+                                            KC_LCTL, KC_LALT,
+                                                     KC_HOME,
+                                   KC_BSPC, KC_DEL,  KC_END,
+        // right hand
+        KC_ESC,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+        XXXXXXX, KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSLS,
+                 KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+        MO(_KP), KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                          KC_UP,   KC_DOWN, KC_LBRC, KC_RBRC, KC_RGUI,
+        KC_LALT, KC_LCTL,
+        KC_PGUP,
+        KC_PGDN, KC_ENT, KC_SPC
+  ),
+
+
+/* Layer 3 : Media layer
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * | TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  | |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * |        |      | PrSc | ScLk | Paus |      |      | |      |      | Mute | Vol- | Vol+ |      |        |
+ * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------| |------| Stop | Prev | Play | Next | Sel  |        |
+ * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
+ * |        |      |Dvorak|Qwerty|Colemk|      |      | |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                             |      |      |      |      |      |
+ *   `----------------------------------'                             `----------------------------------'
+ *                                      ,-------------. ,-------------.
+ *                                      |      |      | |      |      |
+ *                               ,------|------|------| |------+------+------.
+ *                               |      |      |      | |      |      |      |
+ *                               |      |      |------| |------|      |      |
+ *                               |      |      |      | |      |      |      |
+ *                               `--------------------' `--------------------'
  */
-#ifdef SUBPROJECT_infinity // Infinity Ergodox
-	// left hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{KC_F11,  _______, XXXXXXX, _______, _______},
-	{KC_F5,   _______, _______, _______, _______},
-	{KC_F4,   KC_PAUS, _______, COLEMAK, _______},
-	{KC_F3,   KC_SLCK, _______, QWERTY,  _______},
-	{KC_F2,   KC_PSCR, _______, DVORAK,  _______},
-	{KC_F1,   _______, _______, _______, _______},
-	{RESET,   _______, _______, _______, _______},
-
-	//Right Hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{KC_F12,  _______, XXXXXXX, _______, _______},
-	{KC_F6,   _______, KC_MSTP, _______, _______},
-	{KC_F7,   KC_VOLU, KC_MPRV, _______, _______},
-	{KC_F8,   KC_VOLD, KC_MPLY, _______, _______},
-	{KC_F9,   KC_MUTE, KC_MNXT, _______, _______},
-	{KC_F10,  _______, KC_MSEL, _______, _______},
-	{_______, _______, _______, _______, _______},
-#else // Ergodox and Ergodox EZ 
+[_MD] = KEYMAP(
         // left hand
-	{RESET,   _______, _______, _______, _______, XXXXXXX},
-	{KC_F1,   _______, _______, _______, _______, _______},
-	{KC_F2,   KC_PSCR, _______, DVORAK,  _______, _______},
-	{KC_F3,   KC_SLCK, _______, QWERTY,  _______, _______},
-	{KC_F4,   KC_PAUS, _______, COLEMAK, _______, _______},
-	{KC_F5,   _______, _______, _______, XXXXXXX, _______},
-	{KC_F11,  XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
-
-	// right hand
-	{KC_F12,  XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
-	{KC_F6,   _______, KC_MSTP, _______, XXXXXXX, _______},
-	{KC_F7,   KC_MUTE, KC_MPRV, _______, _______, _______},
-	{KC_F8,   KC_VOLD, KC_MPLY, _______, _______, _______},
-	{KC_F9,   KC_VOLU, KC_MNXT, _______, _______, _______},
-	{KC_F10,  _______, KC_MSEL, _______, _______, _______},
-	{_______, _______, _______, _______, _______, XXXXXXX}
-#endif
-  },
-
-
-[_KP] = { // layer 4 : Keypad layer
-/* 
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP * | KP - |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Sleep  |      |      |      |      |      |      |           |      |      | KP 7 | KP 8 | KP 9 | KP + |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F11,
+        _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______,
+        _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______,
+                                            _______, _______,
+                                                     _______,
+                                   _______, _______, _______,
+        // right hand
+        KC_F12,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+        _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,
+                 KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSEL, _______,
+        _______, _______, _______, _______, _______, _______, _______,
+                          _______, _______, _______, _______, _______,
+        _______, _______,
+        _______,
+        _______, _______, _______
+  ),
+
+
+/* Layer 4 : Keypad layer
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * | Power  |      |      |      |      |      |      | |      |      | NmLk | KP = | KP / | KP * |        |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | Sleep  |      |      |      |      |      |      | |      |      | KP 7 | KP 8 | KP 9 | KP - |        |
+ * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
+ * | Wake   |      |      |      |      |      |------| |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
+ * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      | |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                             | KP 0 |      |      |KP Ent|      |
+ *   `----------------------------------'                             `----------------------------------'
+ *                                      ,-------------. ,-------------.
+ *                                      |      |      | |      |      |
+ *                               ,------|------|------| |------+------+------.
+ *                               |      |      |      | |      |      |      |
+ *                               |      |      |------| |------|      |      |
+ *                               |      |      |      | |      |      |      |
+ *                               `--------------------' `--------------------'
  */
-#ifdef SUBPROJECT_infinity // Infinity Ergodox
-	// left hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{_______, _______, XXXXXXX, _______, _______},
-	{_______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, _______},
-	{KC_PWR,  KC_SLEP, KC_WAKE, _______, _______},
-
-	//Right Hand
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{XXXXXXX, XXXXXXX, XXXXXXX, _______, _______},
-	{_______, _______, XXXXXXX, _______, _______},
-	{_______, _______, KC_MSTP, _______, _______},
-	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0  },
-	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   _______},
-	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT},
-	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT},
-	{_______, _______, _______, _______, _______},
-#else // Ergodox and Ergodox EZ 
+[_KP] = KEYMAP(
         // left hand
-	{KC_PWR,  KC_SLEP, KC_WAKE, _______, _______, XXXXXXX},
-	{_______, _______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, _______, _______},
-	{_______, _______, _______, _______, XXXXXXX, _______},
-	{_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
-
-	// right hand
-	{_______, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______},
-	{_______, _______, _______, _______, XXXXXXX, _______},
-	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0,   _______},
-	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   XXXXXXX, _______},
-	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT, _______},
-	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, _______},
-	{_______, _______, _______, _______, XXXXXXX, XXXXXXX}
-#endif
-  },
-
+        KC_PWR,  _______, _______, _______, _______, _______, _______,
+        KC_SLEP, _______, _______, _______, _______, _______, _______,
+        KC_WAKE, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______,
+                                            _______, _______,
+                                                     _______,
+                                   _______, _______, _______,
+        // right hand
+        _______, _______, KC_NLCK, KC_PEQL, KC_PSLS, KC_PAST, _______,
+        _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, _______,
+                 _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, _______,
+        _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PENT, _______,
+                          _______, _______, _______, _______, _______,
+        _______, _______,
+        _______,
+        _______, _______, _______
+  ),
 
 };
 
-- 
cgit v1.2.3


From e4984f65decbd005d147d29b56d7a0c7d7a8dafd Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Fri, 19 Aug 2016 22:45:20 -0700
Subject: Changed the Ergodox keymap to use the KEYMAP() macro, updated
 readme.md.

---
 keyboards/ergodox/keymaps/xyverz/keymap.c  | 13 +++----------
 keyboards/ergodox/keymaps/xyverz/readme.md | 14 +++++++-------
 2 files changed, 10 insertions(+), 17 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
index 5927de33fb..08ee5aeda5 100644
--- a/keyboards/ergodox/keymaps/xyverz/keymap.c
+++ b/keyboards/ergodox/keymaps/xyverz/keymap.c
@@ -1,8 +1,4 @@
 /*
- * PLEASE NOTE: This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity,
- * simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file is untested
- * on the Infinity ErgoDox.
- * 
  * About this keymap:
  * 
  * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak
@@ -14,9 +10,6 @@
  *
  * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck
  * layouts.
- * 
- * For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the
- * keymap is defined, beginning on line 81.
  *
  */
 
@@ -197,7 +190,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F11,
         _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______,
         _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, DVORAK,  QWERTY,  COLEMAK, _______, _______,
         _______, _______, _______, _______, _______,
                                             _______, _______,
                                                      _______,
@@ -224,7 +217,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+------+------+------+------+------|      | |      |------+------+------+------+------+--------|
  * |        |      |      |      |      |      |      | |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
  * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                             | KP 0 |      |      |KP Ent|      |
+ *   |      |      |      |      |      |                             | KP 0 |      | KP . |KP Ent|      |
  *   `----------------------------------'                             `----------------------------------'
  *                                      ,-------------. ,-------------.
  *                                      |      |      | |      |      |
@@ -249,7 +242,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, _______,
                  _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, _______,
         _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PENT, _______,
-                          _______, _______, _______, _______, _______,
+                          KC_P0,   _______, KC_PDOT, KC_PENT, _______,
         _______, _______,
         _______,
         _______, _______, _______
diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md
index e6cb582c5c..6ecdabc9ed 100644
--- a/keyboards/ergodox/keymaps/xyverz/readme.md
+++ b/keyboards/ergodox/keymaps/xyverz/readme.md
@@ -1,9 +1,5 @@
 # Xyverz's ErgoDox EZ Keymap
 
-## Please Note:
-
-This keymap has been updated to work with the Infinity ErgoDox. To build for the Infinity, simply append `SUBPROJECT=infinity` to the end of your `make` statement. This keymap file builds cleanly as is but as of this writing has not been tested on the Infinity ErgoDox. YMMV.
-
 ## About this keymap:
 
 The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my ErgoDox.
@@ -12,7 +8,11 @@ The QWERTY layout shown here is based entirely on the Kinesis Advantage layout,
 
 I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts.
 
-For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the keymap is defined beginning on line 81, or in ../../infinity/infinity.h beginning at line 72.
+## Still to do:
+
+ * Need to figure out a better position for the ESC key.
+ * Come up with a function for the empty keys shown in the alpha layers below.
+ * Fix the CapsLock, NumLock, and ScrLck LEDs.
 
 ### Layer 0: Dvorak layer
 
@@ -103,9 +103,9 @@ For a better explanation of the layout matrices shown below, take a look at ../.
 ### Keymap 4: Keypad layer
 
 	,--------------------------------------------------.,--------------------------------------------------.
-	| Power  |      |      |      |      |      |      ||      |      | NmLk | KP / | KP * | KP - |        |
+	| Power  |      |      |      |      |      |      ||      |      | NmLk | KP = | KP / | KP * |        |
 	|--------+------+------+------+------+-------------||------+------+------+------+------+------+--------|
-	| Sleep  |      |      |      |      |      |      ||      |      | KP 7 | KP 8 | KP 9 | KP + |        |
+	| Sleep  |      |      |      |      |      |      ||      |      | KP 7 | KP 8 | KP 9 | KP - |        |
 	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
 	| Wake   |      |      |      |      |      |------||------|      | KP 4 | KP 5 | KP 6 | KP + |        |
 	|--------+------+------+------+------+------|      ||      |------+------+------+------+------+--------|
-- 
cgit v1.2.3


From 5febdb0a3c9e63d79d6695ebc1f58259669dd168 Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 20 Aug 2016 10:26:36 -0500
Subject: Initial Commmit

---
 keyboards/vision_division/Makefile                 |  75 ++++++++++
 keyboards/vision_division/config.h                 | 162 +++++++++++++++++++++
 keyboards/vision_division/keymaps/default/Makefile |  21 +++
 keyboards/vision_division/keymaps/default/config.h |   8 +
 keyboards/vision_division/keymaps/default/keymap.c |  44 ++++++
 .../vision_division/keymaps/default/readme.md      |   1 +
 keyboards/vision_division/readme.md                |  28 ++++
 keyboards/vision_division/vision_division.c        |  28 ++++
 keyboards/vision_division/vision_division.h        |  19 +++
 9 files changed, 386 insertions(+)
 create mode 100644 keyboards/vision_division/Makefile
 create mode 100644 keyboards/vision_division/config.h
 create mode 100644 keyboards/vision_division/keymaps/default/Makefile
 create mode 100644 keyboards/vision_division/keymaps/default/config.h
 create mode 100644 keyboards/vision_division/keymaps/default/keymap.c
 create mode 100644 keyboards/vision_division/keymaps/default/readme.md
 create mode 100644 keyboards/vision_division/readme.md
 create mode 100644 keyboards/vision_division/vision_division.c
 create mode 100644 keyboards/vision_division/vision_division.h

(limited to 'keyboards')

diff --git a/keyboards/vision_division/Makefile b/keyboards/vision_division/Makefile
new file mode 100644
index 0000000000..3f6d133c9b
--- /dev/null
+++ b/keyboards/vision_division/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
new file mode 100644
index 0000000000..106cf384c3
--- /dev/null
+++ b/keyboards/vision_division/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    You
+#define PRODUCT         vision_division
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D5 }
+#define MATRIX_COL_PINS { F1, F0, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/keymap.c b/keyboards/vision_division/keymaps/default/keymap.c
new file mode 100644
index 0000000000..599c2cb522
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/keymap.c
@@ -0,0 +1,44 @@
+#include "vision_division.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Base */
+  KC_A,  KC_1,  KC_H, \
+    KC_TAB,  KC_SPC   \
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/readme.md b/keyboards/vision_division/keymaps/default/readme.md
new file mode 100644
index 0000000000..bb0ed38622
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for vision_division
\ No newline at end of file
diff --git a/keyboards/vision_division/readme.md b/keyboards/vision_division/readme.md
new file mode 100644
index 0000000000..0a637fd068
--- /dev/null
+++ b/keyboards/vision_division/readme.md
@@ -0,0 +1,28 @@
+vision_division keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/vision_division folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
diff --git a/keyboards/vision_division/vision_division.c b/keyboards/vision_division/vision_division.c
new file mode 100644
index 0000000000..eb9336fa33
--- /dev/null
+++ b/keyboards/vision_division/vision_division.c
@@ -0,0 +1,28 @@
+#include "vision_division.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/vision_division/vision_division.h b/keyboards/vision_division/vision_division.h
new file mode 100644
index 0000000000..d30fc84998
--- /dev/null
+++ b/keyboards/vision_division/vision_division.h
@@ -0,0 +1,19 @@
+#ifndef VISION_DIVISION_H
+#define VISION_DIVISION_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, \
+      k10,  k11   \
+) \
+{ \
+    { k00, k01,   k02 }, \
+    { k10, KC_NO, k11 }, \
+}
+
+#endif
-- 
cgit v1.2.3


From 4807feec8a8ea51db40b881b5057784b2b00310b Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 20 Aug 2016 14:49:16 -0500
Subject: In Progress Merge

---
 keyboards/vision_division/Makefile                 |  11 +-
 keyboards/vision_division/config.h                 |  31 ++++--
 keyboards/vision_division/keymaps/default/Makefile |   2 +-
 keyboards/vision_division/vision_division.h        | 111 ++++++++++++++++++++-
 4 files changed, 137 insertions(+), 18 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/vision_division/Makefile b/keyboards/vision_division/Makefile
index 3f6d133c9b..4f3130c483 100644
--- a/keyboards/vision_division/Makefile
+++ b/keyboards/vision_division/Makefile
@@ -1,8 +1,9 @@
 
 
 # MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
+MCU = at90usb1286
+# MCU = at90usb1287
+# MCU = atmega32u4
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
@@ -47,13 +48,13 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
+OPT_DEFS += -DBOOTLOADER_SIZE=1024
 
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
 CONSOLE_ENABLE ?= yes        # Console for debug(+400)
@@ -61,7 +62,7 @@ COMMAND_ENABLE ?= yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE ?= no            # MIDI controls
 UNICODE_ENABLE ?= no         # Unicode
diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
index 106cf384c3..1faea335ad 100644
--- a/keyboards/vision_division/config.h
+++ b/keyboards/vision_division/config.h
@@ -22,15 +22,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define PRODUCT_ID      0x2525
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    You
-#define PRODUCT         vision_division
-#define DESCRIPTION     A custom keyboard
+#define PRODUCT         Vision Division
+#define DESCRIPTION     Split or Full Keyboard
+#define MATRIX_EXTENDED
 
 /* key matrix size */
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 3
+#ifdef MATRIX_EXTENDED
+	#define MATRIX_ROWS 6
+	#define MATRIX_COLS 24
+#else 
+	#define MATRIX_ROWS 6
+	#define MATRIX_COLS 12
+#endif
 
 /*
  * Keyboard Matrix Assignments
@@ -42,8 +48,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define MATRIX_ROW_PINS { D0, D5 }
-#define MATRIX_COL_PINS { F1, F0, B0 }
+
+#ifdef MATRIX_EXTENDED
+ // Note that the extended colums are reversed because the second PCB has col 1 on the far right.
+	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
+	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3, E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7}
+#else #ifdef MATRIX_LEFT 
+	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
+	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3 }
+
+
+	#define MATRIX_COL_PINS { B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1 }
+#endif
+
 #define UNUSED_PINS
 
 /* COL2ROW or ROW2COL */
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
index f4671a9d11..43fee26686 100644
--- a/keyboards/vision_division/keymaps/default/Makefile
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -2,7 +2,7 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
diff --git a/keyboards/vision_division/vision_division.h b/keyboards/vision_division/vision_division.h
index d30fc84998..deeb85c1fb 100644
--- a/keyboards/vision_division/vision_division.h
+++ b/keyboards/vision_division/vision_division.h
@@ -7,13 +7,114 @@
 // The following is an example using the Planck MIT layout
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
-    k00, k01, k02, \
-      k10,  k11   \
+#define KEYMAP_EXTENDED( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+{ \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
+    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
+    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
+    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
+}
+
+#define KEYMAP_LEFT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+{ \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C },\
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C },\
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C },\
+    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C },\
+    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C },\
+    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C },\
+}
+
+#define KEYMAP_RIGHT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
 ) \
 { \
-    { k00, k01,   k02 }, \
-    { k10, KC_NO, k11 }, \
+    { k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
+    { k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
+    { k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
+    { k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
+    { k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
+    { k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
 }
 
+#ifdef MATRIX_EXTENDED
+#define KEYMAP( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+KEYMAP_EXTENDED( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+)
+#endif
+
+#ifdef MATRIX_LEFT
+#define KEYMAP( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+KEYMAP_LEFT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+)
+#endif
+
+#ifdef MATRIX_RIGHT
+#define KEYMAP( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+KEYMAP_RIGHT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+)
+
+#endif
+
+
 #endif
-- 
cgit v1.2.3


From 66adbfcab5c197f01ead2c07a79b25d2f2b93b1a Mon Sep 17 00:00:00 2001
From: Joe Wasson <jwasson+github@gmail.com>
Date: Thu, 28 Jul 2016 01:25:29 -0700
Subject: Add default swap configs for a couple of boards.

---
 keyboards/ergodox/infinity/infinity.c | 24 ++++++++++++++++++++++++
 keyboards/planck/planck.c             | 10 ++++++++++
 keyboards/preonic/preonic.c           | 11 +++++++++++
 3 files changed, 45 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c
index f89e046d0d..c5793385fe 100644
--- a/keyboards/ergodox/infinity/infinity.c
+++ b/keyboards/ergodox/infinity/infinity.c
@@ -130,3 +130,27 @@ void ergodox_right_led_3_off(void){
 
 void ergodox_right_led_off(uint8_t led){
 }
+
+#ifdef ONEHAND_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}},
+    {{0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}},
+    {{0, 11}, {1, 11}, {2, 11}, {3, 11}, {4, 11}},
+    {{0, 12}, {1, 12}, {2, 12}, {3, 12}, {4, 12}},
+    {{0, 13}, {1, 13}, {2, 13}, {3, 13}, {4, 13}},
+    {{0, 14}, {1, 14}, {2, 14}, {3, 14}, {4, 14}},
+    {{0, 15}, {1, 15}, {2, 15}, {3, 15}, {4, 15}},
+    {{0, 16}, {1, 16}, {2, 16}, {3, 16}, {4, 16}},
+    {{0, 17}, {1, 17}, {2, 17}, {3, 17}, {4, 17}},
+    {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}},
+    {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}},
+    {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}},
+    {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}},
+    {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}},
+    {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}},
+    {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}},
+    {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}},
+    {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}},
+};
+#endif
diff --git a/keyboards/planck/planck.c b/keyboards/planck/planck.c
index 8d70bb4e5a..645b450d1d 100644
--- a/keyboards/planck/planck.c
+++ b/keyboards/planck/planck.c
@@ -1,5 +1,15 @@
 #include "planck.h"
 
+#ifdef ONEHAND_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+  {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+  {{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+  {{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+  {{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
+};
+#endif
+
 void matrix_init_kb(void) {
 	// Turn status LED on
 	DDRE |= (1<<6);
diff --git a/keyboards/preonic/preonic.c b/keyboards/preonic/preonic.c
index 889c3fc8fd..d9c119b8da 100644
--- a/keyboards/preonic/preonic.c
+++ b/keyboards/preonic/preonic.c
@@ -1,5 +1,16 @@
 #include "preonic.h"
 
+#ifdef ONEHAND_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+  {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+  {{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+  {{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+  {{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
+  {{11, 4}, {10, 4}, {9, 4}, {8, 4}, {7, 4}, {6, 4}, {5, 4}, {4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
+};
+#endif
+
 void matrix_init_kb(void) {
 
     // Turn status LED on
-- 
cgit v1.2.3


From c20bf83afd698a4535fa1b8df901f6ab1e3cb532 Mon Sep 17 00:00:00 2001
From: Joe Wasson <jwasson+github@gmail.com>
Date: Sat, 20 Aug 2016 18:32:13 -0700
Subject: Add one-hand key to planck/experimental keymap.

---
 keyboards/planck/keymaps/experimental/Makefile | 1 +
 keyboards/planck/keymaps/experimental/keymap.c | 8 ++++----
 2 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/experimental/Makefile b/keyboards/planck/keymaps/experimental/Makefile
index 877c4aed0e..3a8250a9b5 100644
--- a/keyboards/planck/keymaps/experimental/Makefile
+++ b/keyboards/planck/keymaps/experimental/Makefile
@@ -16,6 +16,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+ONEHAND_ENABLE = yes        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
diff --git a/keyboards/planck/keymaps/experimental/keymap.c b/keyboards/planck/keymaps/experimental/keymap.c
index 2c12700944..569dbcc8aa 100644
--- a/keyboards/planck/keymaps/experimental/keymap.c
+++ b/keyboards/planck/keymaps/experimental/keymap.c
@@ -70,7 +70,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
   {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
-  {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_FN0,  KC_FN0,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
 
 /* Colemak
@@ -88,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
   {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
-  {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_FN0,  KC_FN0,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
 
 /* Dvorak
@@ -106,7 +106,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
   {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
   {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
-  {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_FN0,  KC_FN0,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
 
 /* Lower
@@ -186,7 +186,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-
+  ACTION_SWAP_HANDS_TAP_KEY(KC_SPC),
 };
 
 #ifdef AUDIO_ENABLE
-- 
cgit v1.2.3


From 30de8663a9fbf5b751bd68598479256c956f7eae Mon Sep 17 00:00:00 2001
From: Kyle Berry <kyle@kyleberry.com>
Date: Sun, 21 Aug 2016 14:01:43 -0700
Subject: Fixing Dvorak

Updating with proper Dvorak layout.
---
 keyboards/tv44/keymaps/default/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/tv44/keymaps/default/keymap.c b/keyboards/tv44/keymaps/default/keymap.c
index 6a4fef3da2..f3f989f2d1 100644
--- a/keyboards/tv44/keymaps/default/keymap.c
+++ b/keyboards/tv44/keymaps/default/keymap.c
@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
   },
   [_DV] = { /* Dvorak */
-    {KC_TAB,  KC_COMM, KC_DOT,  KC_SLSH, KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_BSPC },
+    {KC_TAB,  KC_SLSH, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
     {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
     {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
     {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
-- 
cgit v1.2.3


From d7b6d74842cb8c0406996e1a890c40c23b063bb6 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Sun, 21 Aug 2016 23:20:24 +0200
Subject: - Inverted key Tab and Esc - Reorganised bottom row

---
 keyboards/planck/keymaps/dbroqua/keymap.c   |  24 ++++++++++++------------
 keyboards/planck/keymaps/dbroqua/layout.png | Bin 20479 -> 21724 bytes
 2 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
index 3d89ff1d34..e02d98f6ae 100644
--- a/keyboards/planck/keymaps/dbroqua/keymap.c
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -17,7 +17,7 @@ extern keymap_config_t keymap_config;
 #define _QWERTY 0
 #define _LOWER 1
 #define _RAISE 2
-#define _ESC 3
+#define _MULTIMEDIA 3
 #define _ADJUST 4
 
 enum planck_keycodes {
@@ -32,31 +32,31 @@ enum planck_keycodes {
 #define XXXXXXX KC_NO
 
 // Func macro definitions.
-#define SFT_ESC  FUNC(0) // Tap for Enter, hold for Shift
+#define SFT_TAB  FUNC(0) // Tap for Enter, hold for Shift
 
 // Enable these functions using FUNC(n) macro.
 const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_TAP_KEY(_ESC, KC_ESC)
+    [0] = ACTION_LAYER_TAP_KEY(_MULTIMEDIA, KC_TAB)
  };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Qwerty
  * ,-----------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl | GUI  | Lower| Raise|  Alt |    Space    |AltGr | Left | Down |  Up  |Right |
+ * | Ctrl | GUI  | AltGr| Alt  | Lower|    Space    | Raise| Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
 [_QWERTY] = {
-  {KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-  {SFT_ESC,  KC_A,    KC_S,    KC_D,   KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
-  {KC_LCTL, KC_LGUI, LOWER,   RAISE,  KC_LALT, KC_SPC,  KC_SPC,  KC_RALT, KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT}
+  {KC_ESC,  KC_Q,       KC_W,       KC_E,       KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {SFT_TAB, KC_A,       KC_S,       KC_D,       KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,       KC_X,       KC_C,       KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {KC_LCTL, KC_LGUI,    KC_RALT,    KC_LALT,    LOWER,  KC_SPC, KC_SPC, RAISE,  KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT}
 },
 
 /* Lower
@@ -95,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 },
 
-/* Esc
+/* _MULTIMEDIA
  * ,-----------------------------------------------------------------------------------.
  * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -106,7 +106,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Prev | Play | Next |  Del |
  * `-----------------------------------------------------------------------------------'
  */
-[_ESC] = {
+[_MULTIMEDIA] = {
   {KC_F1,   KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,     KC_F12},
   {_______, _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______},
   {_______, _______,    _______,    _______,    _______,    KC_MUTE,    KC_VOLU,    KC_VOLD,    _______,    _______,    _______,    KC_INS},
diff --git a/keyboards/planck/keymaps/dbroqua/layout.png b/keyboards/planck/keymaps/dbroqua/layout.png
index 0deafefe27..846a385f0a 100644
Binary files a/keyboards/planck/keymaps/dbroqua/layout.png and b/keyboards/planck/keymaps/dbroqua/layout.png differ
-- 
cgit v1.2.3


From 364b77563c5056eae8177aeac169dae87cb06228 Mon Sep 17 00:00:00 2001
From: Xyverz <xyverz@gmail.com>
Date: Sun, 21 Aug 2016 18:59:10 -0700
Subject: Added missing key K3A to KEYMAP() macro in tv44.h

---
 keyboards/tv44/tv44.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/tv44/tv44.h b/keyboards/tv44/tv44.h
index 4c30174acc..65c0b45939 100644
--- a/keyboards/tv44/tv44.h
+++ b/keyboards/tv44/tv44.h
@@ -11,7 +11,7 @@
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
-    K30, K31, K32, K33,           K37, K38,      K39,      K3B  \
+    K30, K31, K32, K33,           K37, K38,      K39, K3A, K3B  \
 ) \
 { \
     { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \
-- 
cgit v1.2.3


From 705c775a4a433249081321cea0c2def2627817dc Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sun, 21 Aug 2016 22:05:55 -0500
Subject: Nightly

Only major change to qmk was the addition of A0-A7 pins for the AT90USB
---
 keyboards/vision_division/Potential Layouts.txt    |  84 +++++++++++
 keyboards/vision_division/config.h                 |  44 +-----
 keyboards/vision_division/keymaps/default/config.h |  36 ++++-
 keyboards/vision_division/keymaps/default/keymap.c |  28 +++-
 keyboards/vision_division/matrix_types.h           | 167 +++++++++++++++++++++
 keyboards/vision_division/vision_division.h        | 114 --------------
 6 files changed, 312 insertions(+), 161 deletions(-)
 create mode 100644 keyboards/vision_division/Potential Layouts.txt
 create mode 100644 keyboards/vision_division/matrix_types.h

(limited to 'keyboards')

diff --git a/keyboards/vision_division/Potential Layouts.txt b/keyboards/vision_division/Potential Layouts.txt
new file mode 100644
index 0000000000..f715ac8c65
--- /dev/null
+++ b/keyboards/vision_division/Potential Layouts.txt	
@@ -0,0 +1,84 @@
+/* Numeric Max / Numeric Normal - Full Grid
+ * .-----------------------------------.       .--------------------------------------------------------------_--------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |   o   |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ */
+
+//* Numeric Max / Homing Normal - Full Grid
+ * .-----------------------------------.       .--------------------------------------------------------------_--------------------------------------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |   o   |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+ */
+
+//* Numeric Max / Homing Normal - Traditional
+ * .-----------------------------------.       .-----------------------------------.        .-----------------_-----------------.        .-----------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------'        '-----------------------------------'        '-----------------------------------'       '--------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+        |   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       '--------+--------+--------'
+ * |        |        |        |        |   o   |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|                .--------.
+ * |        |        |        |        |       |                 |        |        |        |        |        |        |        |        |        |        |                 |                |        |
+ * |--------+--------+--------+        |       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       .--------+--------+--------.
+ * |                 |        |        |       |        |        |        |        |        |        |                 |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+ */
+
+/* Numeric Max / Numeric Normal
+ * .-----------------------------------.       .--------------------------------------------------------------_--------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |  1U    |        |        |  1U    |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |  1U    |        |        |  1U    |
+ * |  /     +--------+--------+  /     |   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |  /     +--------+--------+  /     |
+ * |  2U    |        |        |  2U    |   o   |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |                 |       |  2U    |        |        |  2U    |
+ * |--------+--------+--------+--------|   o   |-----------------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |        '--------+--------'        |       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |        '--------+--------'        |
+ * |  1U / 2UH / 2UV |  1U / 2UH / 2UV |       |        |        |        |        |        |        |     1U / 2U     |        |        |        |        |        |        |       |  1U / 2UH / 2UV |  1U / 2UH / 2UV |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ */
+
+/* Numeric Max / Numeric Max
+ * .-----------------------------------.       .-----------------------------------------------------------------------_-----------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |  1U    |        |        |  1U    |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |  1U    |        |        |  1U    |
+ * |  /     +--------+--------+  /     |   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |  /     +--------+--------+  /     |
+ * |  2U    |        |        |  2U    |   o   |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |        |        |                 |       |  2U    |        |        |  2U    |
+ * |--------+--------+--------+--------|   o   |-----------------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |        '--------+--------'        |       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |        '--------+--------'        |
+ * |  1U / 2UH / 2UV |  1U / 2UH / 2UV |       |        |        |        |        |        |        |     1U / 2U     |     1U / 2U     |        |        |        |        |        |        |       |  1U / 2UH / 2UV |  1U / 2UH / 2UV |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ */
diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
index 1faea335ad..37b834973c 100644
--- a/keyboards/vision_division/config.h
+++ b/keyboards/vision_division/config.h
@@ -20,52 +20,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2525
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    You
-#define PRODUCT         Vision Division
-#define DESCRIPTION     Split or Full Keyboard
-#define MATRIX_EXTENDED
-
-/* key matrix size */
-#ifdef MATRIX_EXTENDED
-	#define MATRIX_ROWS 6
-	#define MATRIX_COLS 24
-#else 
-	#define MATRIX_ROWS 6
-	#define MATRIX_COLS 12
-#endif
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
+// Due to the configurability of this keyboard, matrix sizes are determined in the keymap's config.h
 
-#ifdef MATRIX_EXTENDED
- // Note that the extended colums are reversed because the second PCB has col 1 on the far right.
-	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
-	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3, E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7}
-#else #ifdef MATRIX_LEFT 
-	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
-	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3 }
-
-
-	#define MATRIX_COL_PINS { B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1 }
-#endif
-
-#define UNUSED_PINS
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
- 
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
index df06a26206..c005aa8c5a 100644
--- a/keyboards/vision_division/keymaps/default/config.h
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -2,7 +2,41 @@
 #define CONFIG_USER_H
 
 #include "../../config.h"
+#include "matrix_types.h"
 
-// place overrides here
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      GET_PID(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    IBNobody
+#define PRODUCT         Vision Division
+#define DESCRIPTION     Full / Split Keyboard
+
+
+#define MATRIX_ROWS 6
+#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
+
+#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+
+#define UNUSED_PINS
+
+#define KEYMAP( \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C, \
+      k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B, k61C  \
+) \
+KEYMAP_MASTER(NUMERIC_MAX_TEENSY, NUMERIC_MAX, \
+      k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C, \
+      k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, k61C  \
+) \
 
 #endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/keymap.c b/keyboards/vision_division/keymaps/default/keymap.c
index 599c2cb522..3fddee78b7 100644
--- a/keyboards/vision_division/keymaps/default/keymap.c
+++ b/keyboards/vision_division/keymaps/default/keymap.c
@@ -1,10 +1,30 @@
 #include "vision_division.h"
 
+
+
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP( /* Base */
-  KC_A,  KC_1,  KC_H, \
-    KC_TAB,  KC_SPC   \
-),
+
+  [0] = KEYMAP( \
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12  \
+)
+
+/*
+      KC_VOLU, KC_MUTE, KC_VOLU, KC_F24,           KC_F20,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12     k119, k11A, k11B, k11C, \
+      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,          KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,       k219, k21A, k21B, k21C, \
+      KC_KP_7, KC_KP_8, KC_KP_9, KC_F23,           KC_F19,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,       k319, k31A, k31B, k31C, \
+      KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS,          KC_F18,  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP,       k419, k41A, k41B, k41C, \
+      KC_KP_1, KC_KP_2, KC_KP_3, KC_F22,           KC_F17,  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN,       k519, k51A, k51B, k51C. \
+      KC_KP_0, KC_F21,  KC_PDOT, KC_PENT,          KC_F16,  KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT,       k619, k61A, k61B, k61C  \
+
+    ) //-----, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------,
+
+*/
 };
 
 const uint16_t PROGMEM fn_actions[] = {
diff --git a/keyboards/vision_division/matrix_types.h b/keyboards/vision_division/matrix_types.h
new file mode 100644
index 0000000000..d40b2079a6
--- /dev/null
+++ b/keyboards/vision_division/matrix_types.h
@@ -0,0 +1,167 @@
+#ifndef MATRIX_TYPES_H
+#define MATRIX_TYPES_H
+
+// Because the vision/division keyboard allows for multiple PCB configurations, the configuration
+// can get tricky. The PCB itself has 12 columns, but to achieve a full sized 14-column keyboard
+// with a 4-column numeric pad on the left and a 3-column homing key cluster on the right, the
+// right PCB must have its rightmost column cut off. Also either the rightmost two columns on the
+// left PCB or the leftmost two columns on the right PCB need to be cut away.
+//
+//                          _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
+// Left Numeric Max       = 1 2 3 4 _ 5 6 7 8 9 0 A B C
+// Left Homing Max        =   2 3 4 _ 5 6 7 8 9 0 A B C
+// Left Numeric Extended  = 1 2 3 4 _ 5 6 7 8 9 0 A B
+// Left Homing Extended   =   2 3 4 _ 5 6 7 8 9 0 A B
+// Left Numeric Normal    = 1 2 3 4 _ 5 6 7 8 9 0 A
+// Left Homing Normal     =   2 3 4 _ 5 6 7 8 9 0 A
+// Right Numeric Max      =                             1 2 3 4 5 6 7 8 _ 9 A B C
+// Right Homing Max       =                             1 2 3 4 5 6 7 8 _ 9 A B
+// Right Numeric Extended =                               2 3 4 5 6 7 8 _ 9 A B C
+// Right Homing Extended  =                               2 3 4 5 6 7 8 _ 9 A B
+// Right Numeric Normal   =                                 3 4 5 6 7 8 _ 9 A B C
+// Right Homing Normal    =                                 3 4 5 6 7 8 _ 9 A B
+//
+//
+// A full keyboard would look like this:
+//
+// _Left_Numeric_Max__________|_Right_Homing_Normal
+// 1 2 3 4 _ 5 6 7 8 9 0 A B C|3 4 5 6 7 8 _ 9 A B
+//
+// The ideal full keyboard would use a normal and max rather than two extended because the max
+// size allows for a centered 2U space key.
+
+
+#define MATRIX_TYPE_ABSENT                      0
+#define MATRIX_TYPE_NUMERIC_MAX                 1
+#define MATRIX_TYPE_HOMING_MAX                  2
+#define MATRIX_TYPE_NUMERIC_EXTENDED            3
+#define MATRIX_TYPE_HOMING_EXTENDED             4
+#define MATRIX_TYPE_NUMERIC_NORMAL              5
+#define MATRIX_TYPE_HOMING_NORMAL               6
+#define MATRIX_TYPE_NUMERIC_MAX_TEENSY          7
+#define MATRIX_TYPE_HOMING_MAX_TEENSY           8
+#define MATRIX_TYPE_NUMERIC_EXTENDED_TEENSY     9
+#define MATRIX_TYPE_HOMING_EXTENDED_TEENSY      10
+#define MATRIX_TYPE_NUMERIC_NORMAL_TEENSY       11
+#define MATRIX_TYPE_HOMING_NORMAL_TEENSY        12
+
+
+// Column Length
+
+#define MATRIX_COLS_ABSENT                       0
+#define MATRIX_COLS_NUMERIC_MAX                 12
+#define MATRIX_COLS_HOMING_MAX                  11
+#define MATRIX_COLS_NUMERIC_EXTENDED            11
+#define MATRIX_COLS_HOMING_EXTENDED             10
+#define MATRIX_COLS_NUMERIC_NORMAL              10
+#define MATRIX_COLS_HOMING_NORMAL                9
+#define MATRIX_COLS_NUMERIC_MAX_TEENSY          12
+#define MATRIX_COLS_HOMING_MAX_TEENSY           11
+#define MATRIX_COLS_NUMERIC_EXTENDED_TEENSY     11
+#define MATRIX_COLS_HOMING_EXTENDED_TEENSY      10
+#define MATRIX_COLS_NUMERIC_NORMAL_TEENSY       10
+#define MATRIX_COLS_HOMING_NORMAL_TEENSY         9
+
+// Left PCB Pin assignments
+
+#define MATRIX_COL_PINS_LEFT_ABSENT
+
+#define MATRIX_COL_PINS_LEFT_NUMERIC_MAX                 C7, C5, C4, A7, A3, A6, A2, A5, A1, A0, A4, E6
+#define MATRIX_COL_PINS_LEFT_HOMING_MAX                      C5, C4, A7, A3, A6, A2, A5, A1, A0, A4, E6
+#define MATRIX_COL_PINS_LEFT_NUMERIC_EXTENDED            C7, C5, C4, A7, A3, A6, A2, A5, A1, A0, A4
+#define MATRIX_COL_PINS_LEFT_HOMING_EXTENDED                 C5, C4, A7, A3, A6, A2, A5, A1, A0, A4
+#define MATRIX_COL_PINS_LEFT_NUMERIC_NORMAL              C7, C5, C4, A7, A3, A6, A2, A5, A1, A0
+#define MATRIX_COL_PINS_LEFT_HOMING_NORMAL                   C5, C4, A7, A3, A6, A2, A5, A1, A0
+
+#define MATRIX_COL_PINS_LEFT_NUMERIC_MAX_TEENSY          C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3
+#define MATRIX_COL_PINS_LEFT_HOMING_MAX_TEENSY               C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3
+#define MATRIX_COL_PINS_LEFT_NUMERIC_EXTENDED_TEENSY     C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2
+#define MATRIX_COL_PINS_LEFT_HOMING_EXTENDED_TEENSY          C0, E1, E0, F3, F2, F1, F0, B0, B1, B2
+#define MATRIX_COL_PINS_LEFT_NUMERIC_NORMAL_TEENSY       C1, C0, E1, E0, F3, F2, F1, F0, B0, B1
+#define MATRIX_COL_PINS_LEFT_HOMING_NORMAL_TEENSY            C0, E1, E0, F3, F2, F1, F0, B0, B1
+
+// Right PCB Pin assignments
+
+#define MATRIX_COL_PINS_RIGHT_ABSENT
+
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_MAX                 E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7
+#define MATRIX_COL_PINS_RIGHT_HOMING_MAX                  E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_EXTENDED                A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7
+#define MATRIX_COL_PINS_RIGHT_HOMING_EXTENDED                 A4, A0, A1, A5, A2, A6, A3, A7, C4, C5
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_NORMAL                      A0, A1, A5, A2, A6, A3, A7, C4, C5, C7
+#define MATRIX_COL_PINS_RIGHT_HOMING_NORMAL                       A0, A1, A5, A2, A6, A3, A7, C4, C5
+
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_MAX_TEENSY          B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1
+#define MATRIX_COL_PINS_RIGHT_HOMING_MAX_TEENSY           B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_EXTENDED_TEENSY         B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1
+#define MATRIX_COL_PINS_RIGHT_HOMING_EXTENDED_TEENSY          B2, B1, B0, F0, F1, F2, F3, E0, E1, C0
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_NORMAL_TEENSY               B1, B0, F0, F1, F2, F3, E0, E1, C0, C1
+#define MATRIX_COL_PINS_RIGHT_HOMING_NORMAL_TEENSY                B1, B0, F0, F1, F2, F3, E0, E1, C0
+
+// Fetch Macros
+
+#define GET_PID(LEFT_TYPE, RIGHT_TYPE) ( ( ( MATRIX_TYPE_ ## LEFT_TYPE ) << 8 ) + ( MATRIX_TYPE_ ## RIGHT_TYPE ) )
+#define GET_MATRIX_COL(TYPE) MATRIX_COLS_ ## TYPE
+#define GET_MATRIX_COLS(LEFT_TYPE, RIGHT_TYPE) ( ( GET_MATRIX_COL(LEFT_TYPE) ) + ( GET_MATRIX_COL(RIGHT_TYPE) ) )
+#define GET_MATRIX_COL_PINS(LEFT_TYPE, RIGHT_TYPE) { MATRIX_COL_PINS_LEFT_ ## LEFT_TYPE, MATRIX_COL_PINS_RIGHT_ ## RIGHT_TYPE }
+
+// Specialized Row Macros
+
+#define KEYMAP_ROW_LEFT_ABSENT(                   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)
+
+#define KEYMAP_ROW_LEFT_NUMERIC_MAX(              k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_HOMING_MAX(               k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_NUMERIC_EXTENDED(         k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_HOMING_EXTENDED(          k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_NUMERIC_NORMAL(           k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A
+#define KEYMAP_ROW_LEFT_HOMING_NORMAL(            k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A
+#define KEYMAP_ROW_LEFT_NUMERIC_MAX_TEENSY(       k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_HOMING_MAX_TEENSY(        k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_NUMERIC_EXTENDED_TEENSY(  k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_HOMING_EXTENDED_TEENSY(   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_NUMERIC_NORMAL_TEENSY(    k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A
+#define KEYMAP_ROW_LEFT_HOMING_NORMAL_TEENSY(     k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A
+
+#define KEYMAP_ROW_RIGHT_ABSENT(                  k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)
+
+#define KEYMAP_ROW_RIGHT_NUMERIC_MAX(             k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_MAX(              k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_EXTENDED(        k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_EXTENDED(         k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_NORMAL(          k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_NORMAL(           k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_MAX_TEENSY(      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_MAX_TEENSY(       k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_EXTENDED_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_EXTENDED_TEENSY(  k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_NORMAL_TEENSY(   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_NORMAL_TEENSY(    k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+
+// Changable Row Macro
+
+#define KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, \
+  k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+) \
+KEYMAP_ROW_LEFT_ ## LEFT_TYPE(k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C), KEYMAP_ROW_RIGHT_ ## RIGHT_TYPE(k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C)
+
+// Changable Master Macro
+
+#define KEYMAP_MASTER(LEFT_TYPE, RIGHT_TYPE, \
+      k001, k002, k003, k004,       k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018,       k019, k01A, k01B, k01C, \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C  \
+) \
+{ \
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C ) },\
+}
+
+
+#endif // MATRIX_TYPES_H
\ No newline at end of file
diff --git a/keyboards/vision_division/vision_division.h b/keyboards/vision_division/vision_division.h
index deeb85c1fb..a1f3195e9e 100644
--- a/keyboards/vision_division/vision_division.h
+++ b/keyboards/vision_division/vision_division.h
@@ -3,118 +3,4 @@
 
 #include "quantum.h"
 
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-#define KEYMAP_EXTENDED( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-{ \
-    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
-    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
-    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
-    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
-    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
-    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
-}
-
-#define KEYMAP_LEFT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-{ \
-    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C },\
-    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C },\
-    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C },\
-    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C },\
-    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C },\
-    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C },\
-}
-
-#define KEYMAP_RIGHT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-{ \
-    { k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
-    { k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
-    { k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
-    { k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
-    { k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
-    { k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
-}
-
-#ifdef MATRIX_EXTENDED
-#define KEYMAP( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-KEYMAP_EXTENDED( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-)
-#endif
-
-#ifdef MATRIX_LEFT
-#define KEYMAP( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-KEYMAP_LEFT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-)
-#endif
-
-#ifdef MATRIX_RIGHT
-#define KEYMAP( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-KEYMAP_RIGHT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-)
-
-#endif
-
-
 #endif
-- 
cgit v1.2.3


From 0418ecc073d420fff3be2603bfb7a6fa234bd357 Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <jafo@tummy.com>
Date: Mon, 22 Aug 2016 10:26:18 -0600
Subject: Changes from review by @fredizzimo and @Xyverz

---
 keyboards/ergodox/readme.md | 35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index 349a0ce40c..304f2b01f2 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -1,18 +1,3 @@
-# Keymap Options
-
-There are external tools for customizing the layout, but those do not use
-the featurs of this qmk firmware.  These sites include:
-
-  - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez
-  - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files
-
-You can also find an existing firmware that you like, for example from:
-
-  - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/)
-
-This qmk firmware also provides the ability to customize keymaps, but requires
-a toolchain to build the firmware.  See below for instructions on building
-firmware and customizing keymaps.
 
 # Customizing Keymaps
 
@@ -94,8 +79,6 @@ To flash the firmware:
 The Infinity is two completely independent keyboards, and needs to be flashed
 for the left and right halves seperately.  To flash them:
 
-  - Remove the build directory with `rm -rf ../../.build`
-
   - Build the firmware with `make keymap=keymapname subproject=infinity`
 
   - Plug in the left hand keyboard only.
@@ -104,8 +87,6 @@ for the left and right halves seperately.  To flash them:
 
   - Install the firmware with `sudo make dfu-util keymap=keymapname subproject=infinity`
 
-  - Remove the left-hand build with `rm -rf ../../.build`
-
   - Build left hand firmware with `make keymap=keymapname subproject=infinity MASTER=right`
 
   - Plug in the right hand keyboard only.
@@ -133,3 +114,19 @@ Let's say you want a certain key in your layout to send a colon; to figure out w
 That file contains a big list of all of the special, fancy keys (like, being able to send % on its own and whatnot).
 
 If you want to send a plain vanilla key, you can look up its code under `doc/keycode.txt`. That's where all the boring keys hang out.
+
+# Other Firmware Options
+
+There are external tools for customizing the layout, but those do not use
+the featurs of this qmk firmware.  These sites include:
+
+  - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez
+  - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files
+
+You can also find an existing firmware that you like, for example from:
+
+  - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/)
+
+This qmk firmware also provides the ability to customize keymaps, but requires
+a toolchain to build the firmware.  See below for instructions on building
+firmware and customizing keymaps.
-- 
cgit v1.2.3


From a26ee57eb8202e7da31049b1761ca74be5184414 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ren=C3=A9=20Werner?= <mail@renewerner.net>
Date: Mon, 22 Aug 2016 20:34:29 +0200
Subject: Added support for the Kitten Paw controller

This adds support for the 2016 revision of the Kitten Paw [1] replacement
controller by Bathroom Epiphanies.

[1] http://bathroomepiphanies.com/controllers/
---
 keyboards/kitten_paw/Makefile                 |  77 ++++++++++++
 keyboards/kitten_paw/config.h                 | 162 +++++++++++++++++++++++++
 keyboards/kitten_paw/keymaps/default/keymap.c |  51 ++++++++
 keyboards/kitten_paw/kitten_paw.c             |  30 +++++
 keyboards/kitten_paw/kitten_paw.h             |  47 ++++++++
 keyboards/kitten_paw/led.c                    |  47 ++++++++
 keyboards/kitten_paw/matrix.c                 | 164 ++++++++++++++++++++++++++
 keyboards/kitten_paw/readme.md                |  32 +++++
 keyboards/readme.md                           |   1 +
 9 files changed, 611 insertions(+)
 create mode 100644 keyboards/kitten_paw/Makefile
 create mode 100644 keyboards/kitten_paw/config.h
 create mode 100644 keyboards/kitten_paw/keymaps/default/keymap.c
 create mode 100644 keyboards/kitten_paw/kitten_paw.c
 create mode 100644 keyboards/kitten_paw/kitten_paw.h
 create mode 100644 keyboards/kitten_paw/led.c
 create mode 100644 keyboards/kitten_paw/matrix.c
 create mode 100644 keyboards/kitten_paw/readme.md

(limited to 'keyboards')

diff --git a/keyboards/kitten_paw/Makefile b/keyboards/kitten_paw/Makefile
new file mode 100644
index 0000000000..9122921737
--- /dev/null
+++ b/keyboards/kitten_paw/Makefile
@@ -0,0 +1,77 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+	OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c led.c
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
diff --git a/keyboards/kitten_paw/config.h b/keyboards/kitten_paw/config.h
new file mode 100644
index 0000000000..d7089734aa
--- /dev/null
+++ b/keyboards/kitten_paw/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Costar
+#define PRODUCT         Majestouch
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+//#define MATRIX_ROW_PINS { D0, D5 }
+//#define MATRIX_COL_PINS { F1, F0, B0 }
+//#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/kitten_paw/keymaps/default/keymap.c b/keyboards/kitten_paw/keymaps/default/keymap.c
new file mode 100644
index 0000000000..f672357455
--- /dev/null
+++ b/keyboards/kitten_paw/keymaps/default/keymap.c
@@ -0,0 +1,51 @@
+#include "kitten_paw.h"
+
+enum layers {
+    DEFAULT,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [DEFAULT] = KEYMAP(\
+       KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_PSCR,KC_SLCK,KC_PAUS,                        \
+       KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC,   KC_INS,KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+       KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,   KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
+      KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
+      KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,            KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
+      KC_LCTL,KC_LGUI,KC_LALT,                 KC_SPC,                                KC_RALT,KC_RGUI,KC_MENU,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/kitten_paw/kitten_paw.c b/keyboards/kitten_paw/kitten_paw.c
new file mode 100644
index 0000000000..8713baf433
--- /dev/null
+++ b/keyboards/kitten_paw/kitten_paw.c
@@ -0,0 +1,30 @@
+#include "kitten_paw.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+    matrix_init_quantum();
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+    matrix_scan_quantum();
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/kitten_paw/kitten_paw.h b/keyboards/kitten_paw/kitten_paw.h
new file mode 100644
index 0000000000..a6c1d27de7
--- /dev/null
+++ b/keyboards/kitten_paw/kitten_paw.h
@@ -0,0 +1,47 @@
+#ifndef KITTEN_PAW_H
+#define KITTEN_PAW_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+/*
+  Matrix col/row mapping
+  
+  ,----.    ,-------------------. ,-------------------. ,-------------------. ,--------------.
+  | J6 |    | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
+  `----'    `-------------------' `-------------------' `-------------------' `--------------'
+  ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
+  | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 |     B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
+  |-------------------------------------------------------------------------| |--------------| |-------------------|
+  | J2   | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 |   B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
+  |-------------------------------------------------------------------------| '--------------' |--------------     |
+  | O5    | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 |       B1 |                  | K2 | L2 | Q2 |    |
+  |-------------------------------------------------------------------------|      ,----.      |-------------------|
+  | N2      | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 |          N3 |      | O6 |      | K3 | L3 | Q3 | O3 |
+  |-------------------------------------------------------------------------| ,--------------. |--------------     |
+  | A4 | P2 | C6 |                  K6                  | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6      | Q6 |    |
+  `-------------------------------------------------------------------------' `--------------' `-------------------'
+*/
+
+#define KEYMAP( \
+  KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5,                       \
+  KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4,   KK1, KL1, KQ1, KQ0, \
+  KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7,   KK5, KL5, KQ5, KO5, \
+  KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                    KK2, KL2, KQ2,      \
+  KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,        KK3, KL3, KQ3, KO3, \
+  KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0,   KL6,      KQ6       \
+) \
+{ \
+    {KC_NO,  KB0,  KC0,  KD0,KC_NO,  KF0,  KG0,KC_NO,KC_NO,KC_NO,  KK0,  KL0,KC_NO,KC_NO,  KO0,KC_NO,  KQ0,  KR0}, \
+    {  KA1,  KB1,KC_NO,  KD1,  KE1,  KF1,  KG1,  KH1,  KI1,  KJ1,  KK1,  KL1,KC_NO,KC_NO,KC_NO,KC_NO,  KQ1,KC_NO}, \
+    {KC_NO,  KB2,KC_NO,  KD2,  KE2,  KF2,  KG2,  KH2,  KI2,  KJ2,  KK2,  KL2,KC_NO,  KN2,KC_NO,  KP2,  KQ2,  KR2}, \
+    {KC_NO,  KB3,KC_NO,  KD3,  KE3,  KF3,  KG3,  KH3,  KI3,  KJ3,  KK3,  KL3,  KM3,  KN3,  KO3,KC_NO,  KQ3,  KR3}, \
+    {  KA4,  KB4,KC_NO,  KD4,  KE4,  KF4,  KG4,  KH4,  KI4,  KJ4,  KK4,  KL4,KC_NO,KC_NO,  KO4,KC_NO,  KQ4,  KR4}, \
+    {  KA5,KC_NO,  KC5,  KD5,  KE5,  KF5,  KG5,  KH5,  KI5,  KJ5,  KK5,  KL5,KC_NO,KC_NO,  KO5,KC_NO,  KQ5,  KR5}, \
+    {KC_NO,  KB6,  KC6,KC_NO,  KE6,  KF6,  KG6,  KH6,  KI6,  KJ6,  KK6,  KL6,KC_NO,KC_NO,  KO6,KC_NO,  KQ6,  KR6}, \
+    {  KA7,  KB7,  KC7,  KD7,  KE7,  KF7,  KG7,  KH7,  KI7,  KJ7,KC_NO,KC_NO,KC_NO,KC_NO,  KO7,KC_NO,  KQ7,  KR7} \
+}
+
+#endif
diff --git a/keyboards/kitten_paw/led.c b/keyboards/kitten_paw/led.c
new file mode 100644
index 0000000000..a1bf057c4c
--- /dev/null
+++ b/keyboards/kitten_paw/led.c
@@ -0,0 +1,47 @@
+/*
+  Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+/* LED pin configuration
+ *
+ * Scroll Lock  PC5
+ * Caps Lock    PC6
+ * Num Lock     PB7
+ *
+ */
+void led_set(uint8_t usb_led) {
+  DDRB |= (1<<7);
+  DDRC |= (1<<5) | (1<<6);
+  
+  if (usb_led & (1<<USB_LED_CAPS_LOCK))
+    PORTC &= ~(1<<6);
+  else
+    PORTC |=  (1<<6);
+  
+  if (usb_led & (1<<USB_LED_NUM_LOCK))
+    PORTB &= ~(1<<7);
+  else
+    PORTB |=  (1<<7);
+  
+  if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+    PORTC &= ~(1<<5);
+  else
+    PORTC |=  (1<<5);
+}
diff --git a/keyboards/kitten_paw/matrix.c b/keyboards/kitten_paw/matrix.c
new file mode 100644
index 0000000000..46875293fc
--- /dev/null
+++ b/keyboards/kitten_paw/matrix.c
@@ -0,0 +1,164 @@
+/*
+  Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(void);
+static void select_col(uint8_t col);
+
+inline uint8_t matrix_rows(void) {
+  return MATRIX_ROWS;
+}
+
+inline uint8_t matrix_cols(void) {
+  return MATRIX_COLS;
+}
+
+/* Column pin configuration
+ *
+ * col: 0    1    2    3    4    5    6    7
+ * pin: PC7  PD5  PD3  PD1  PC2  PD6  PD4  PD2
+ *
+ * Rrr pin configuration 
+ *
+ * These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low
+ * active), together with 2 rrrs driven directly from the micro
+ * controller, to control the 18 rrrs. The rrrs are driven from
+ * pins B6,5,4,3,2,1,0.
+ */
+void matrix_init(void) {
+  DDRC  &= ~0b10000100;  // Row input pins
+  DDRD  &= ~0b01111110;
+  PORTC |=  0b10000100;
+  PORTD |=  0b01111110;
+
+  DDRB  |=  0b01111111;  // Column output pins
+
+  for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+}
+
+uint8_t matrix_scan(void) {
+  for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+    select_col(col);
+    _delay_us(3);
+    uint8_t rows = read_rows();
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+      bool curr_bit = rows & (1<<row);
+      if (prev_bit != curr_bit) {
+        matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+        debouncing = DEBOUNCING_DELAY;
+      }
+    }
+  }
+  
+  if (debouncing) {
+    if (--debouncing) {
+      _delay_ms(1);
+    }
+    else {
+      for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        matrix[i] = matrix_debouncing[i];
+      }
+    }
+  }
+  
+  return 1;
+}
+
+bool matrix_is_modified(void) {
+  if (debouncing)
+    return false;
+  else
+    return true;
+}
+
+inline bool matrix_is_on(uint8_t row, uint8_t col) {
+  return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+  return matrix[row];
+}
+
+void matrix_print(void) {
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+  }
+}
+
+uint8_t matrix_key_count(void) {
+  uint8_t count = 0;
+  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+    count += bitpop32(matrix[i]);
+  }
+  return count;
+}
+
+static uint8_t read_rows(void) {
+  return
+    (PINC&(1<<7) ? 0 : (1<<0)) |
+    (PIND&(1<<5) ? 0 : (1<<1)) |
+    (PIND&(1<<3) ? 0 : (1<<2)) |
+    (PIND&(1<<1) ? 0 : (1<<3)) |
+    (PINC&(1<<2) ? 0 : (1<<4)) |
+    (PIND&(1<<2) ? 0 : (1<<5)) |
+    (PIND&(1<<4) ? 0 : (1<<6)) |
+    (PIND&(1<<6) ? 0 : (1<<7));
+}
+
+static void select_col(uint8_t col) {
+  switch (col) {
+  case  0: PORTB = (PORTB & ~0b01111111) | 0b01100100; break;
+  case  1: PORTB = (PORTB & ~0b01111111) | 0b01101100; break;
+  case  2: PORTB = (PORTB & ~0b01111111) | 0b01100010; break;
+  case  3: PORTB = (PORTB & ~0b01111111) | 0b01111010; break;
+  case  4: PORTB = (PORTB & ~0b01111111) | 0b01100110; break;
+  case  5: PORTB = (PORTB & ~0b01111111) | 0b01110110; break;
+  case  6: PORTB = (PORTB & ~0b01111111) | 0b01101110; break;
+  case  7: PORTB = (PORTB & ~0b01111111) | 0b01111110; break;
+  case  8: PORTB = (PORTB & ~0b01111111) | 0b01000001; break;
+  case  9: PORTB = (PORTB & ~0b01111111) | 0b00100001; break;
+  case 10: PORTB = (PORTB & ~0b01111111) | 0b01101010; break;
+  case 11: PORTB = (PORTB & ~0b01111111) | 0b01110010; break;
+  case 12: PORTB = (PORTB & ~0b01111111) | 0b01111100; break;
+  case 13: PORTB = (PORTB & ~0b01111111) | 0b01110100; break;
+  case 14: PORTB = (PORTB & ~0b01111111) | 0b01111000; break;
+  case 15: PORTB = (PORTB & ~0b01111111) | 0b01110000; break;
+  case 16: PORTB = (PORTB & ~0b01111111) | 0b01100000; break;
+  case 17: PORTB = (PORTB & ~0b01111111) | 0b01101000; break;
+  }
+}
diff --git a/keyboards/kitten_paw/readme.md b/keyboards/kitten_paw/readme.md
new file mode 100644
index 0000000000..a6ef2a0672
--- /dev/null
+++ b/keyboards/kitten_paw/readme.md
@@ -0,0 +1,32 @@
+kitten_paw keyboard firmware
+======================
+This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies.
+Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies).
+
+NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/kitten_paw folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
diff --git a/keyboards/readme.md b/keyboards/readme.md
index f6c90b1f63..4f17962191 100644
--- a/keyboards/readme.md
+++ b/keyboards/readme.md
@@ -39,6 +39,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [hhkb](/keyboards/hhkb) &mdash; The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
 * [jd45](/keyboards/jd45) &mdash; Another Geekhack community project, designed by jdcarpe.
 * [kc60](/keyboards/kc60) &mdash; A programmable Chinese-made keyboard, lost in the mists of time.
+* [kitten_paw](/keyboards/kitten_paw) &mdash; A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies](https://github.com/BathroomEpiphanies)
 * [phantom](/keyboards/phantom) &mdash; A tenkeyless kit by Teel, also from Geekhack.
 * [retro_refit](/keyboards/retro_refit) &mdash; Another creation by IBNobody.
 * [satan](/keyboards/satan) &mdash; A GH60 variant.
-- 
cgit v1.2.3


From 92fe78a5ea98cc8ca36d74ce86c24fe284729c39 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Mon, 22 Aug 2016 21:19:03 +0200
Subject: - Added PrintScreen key on multimedia layer

---
 keyboards/planck/keymaps/dbroqua/keymap.c   |   4 ++--
 keyboards/planck/keymaps/dbroqua/layout.png | Bin 21724 -> 21895 bytes
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/keymap.c b/keyboards/planck/keymaps/dbroqua/keymap.c
index e02d98f6ae..33929cb3af 100644
--- a/keyboards/planck/keymaps/dbroqua/keymap.c
+++ b/keyboards/planck/keymaps/dbroqua/keymap.c
@@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |  Psc |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      | Mute | Vol+ | Vol- |      |      |      |Insert|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -108,7 +108,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_MULTIMEDIA] = {
   {KC_F1,   KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,     KC_F12},
-  {_______, _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______},
+  {_______, _______,    _______,    _______,    _______,    _______,    _______,    KC_PSCR,    _______,    _______,    _______,    _______},
   {_______, _______,    _______,    _______,    _______,    KC_MUTE,    KC_VOLU,    KC_VOLD,    _______,    _______,    _______,    KC_INS},
   {_______, _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_MPRV,    KC_MPLY,    KC_MNXT,    KC_DEL}
 },
diff --git a/keyboards/planck/keymaps/dbroqua/layout.png b/keyboards/planck/keymaps/dbroqua/layout.png
index 846a385f0a..37b74cdc5e 100644
Binary files a/keyboards/planck/keymaps/dbroqua/layout.png and b/keyboards/planck/keymaps/dbroqua/layout.png differ
-- 
cgit v1.2.3


From 86656690f12e98f7aa6c2faddbcef3b9bcdad35b Mon Sep 17 00:00:00 2001
From: Jason Green <jason@jasg.org>
Date: Mon, 1 Aug 2016 18:28:21 +0000
Subject: TxBolt (Steno) Serial protocol for Ergodox Ez

---
 keyboards/ergodox/keymaps/steno/Makefile  |   3 +
 keyboards/ergodox/keymaps/steno/keymap.c  | 324 ++++++++++++++++++++++++++++++
 keyboards/ergodox/keymaps/steno/readme.md |  92 +++++++++
 3 files changed, 419 insertions(+)
 create mode 100644 keyboards/ergodox/keymaps/steno/Makefile
 create mode 100644 keyboards/ergodox/keymaps/steno/keymap.c
 create mode 100644 keyboards/ergodox/keymaps/steno/readme.md

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/steno/Makefile b/keyboards/ergodox/keymaps/steno/Makefile
new file mode 100644
index 0000000000..b6fb9b1a80
--- /dev/null
+++ b/keyboards/ergodox/keymaps/steno/Makefile
@@ -0,0 +1,3 @@
+VIRTSER_ENABLE = yes
+# Not enough interupts, so something has to go
+MOUSEKEY_ENABLE = no
diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c
new file mode 100644
index 0000000000..f885ac575a
--- /dev/null
+++ b/keyboards/ergodox/keymaps/steno/keymap.c
@@ -0,0 +1,324 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "lufa.h"
+#include "sendchar.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+#define TXBOLT 3 // TxBolt Steno Virtual Serial
+#define TXBOLT2 4 // TxBolt Steno Virtual Serial Alternative Layout
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   ALL_T(KC_NO),
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
+                                              ALT_T(KC_APP),  KC_LGUI,
+                                                              KC_HOME,
+                                               KC_SPC,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
+             TG(TXBOLT),  KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+             MEH_T(KC_NO),KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                                  KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
+             KC_LALT,        CTL_T(KC_ESC),
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       M(0),   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+// TxBolt Codes
+#define Sl 0b00000001
+#define Tl 0b00000010
+#define Kl 0b00000100
+#define Pl 0b00001000
+#define Wl 0b00010000
+#define Hl 0b00100000
+#define Rl 0b01000001
+#define Al 0b01000010
+#define Ol 0b01000100
+#define X  0b01001000
+#define Er 0b01010000
+#define Ur 0b01100000
+#define Fr 0b10000001
+#define Rr 0b10000010
+#define Pr 0b10000100
+#define Br 0b10001000
+#define Lr 0b10010000
+#define Gr 0b10100000
+#define Tr 0b11000001
+#define Sr 0b11000010
+#define Dr 0b11000100
+#define Zr 0b11001000
+#define NM 0b11010000
+#define GRPMASK 0b11000000
+#define GRP0 0b00000000
+#define GRP1 0b01000000
+#define GRP2 0b10000000
+#define GRP3 0b11000000
+/* Keymap 3: TxBolt (Serial)
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   A  |   O  |------|       |------|   E  |   U  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// TxBolt over Serial
+[TXBOLT] = KEYMAP(
+       KC_BSPC, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),  KC_NO,  
+       KC_NO,   M(Sl),   M(Tl),   M(Pl),   M(Hl),   M(X),
+       KC_NO,   M(Sl),   M(Kl),   M(Wl),   M(Rl),   M(X),   KC_NO,
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+                                           KC_NO,   KC_NO,  
+                                                    KC_NO,  
+                                  M(Al),   M(Ol),   KC_NO,  
+    // right hand
+       KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_TRNS,  M(NM),   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),
+                 M(X),    M(Fr),   M(Pr),   M(Lr),   M(Tr),   M(Dr),
+       KC_NO,    M(X),    M(Rr),   M(Br),   M(Gr),   M(Sr),   M(Zr),
+                          KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   KC_NO,  
+       KC_NO,  
+       KC_NO,   M(Er),   M(Ur)
+),
+/* Keymap 4: TxBolt (Serial) Alternative
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |      |           |      |   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |------|           |------|   *  |   R  |   B  |   G  |   S  |   Z    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |   A  |   O  |                                       |   E  |   U  |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// TxBolt over Serial
+[TXBOLT2] = KEYMAP(
+       KC_NO,   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),  KC_NO,  
+       KC_NO,   M(Sl),   M(Tl),   M(Pl),   M(Hl),   M(X),   KC_NO,  
+       KC_NO,   M(Sl),   M(Kl),   M(Wl),   M(Rl),   M(X),
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   KC_NO,   KC_NO,   M(Al),   M(Ol),
+                                           KC_NO,   KC_NO,  
+                                                    KC_NO,  
+                                  KC_NO,   KC_NO,   KC_NO,  
+    // right hand
+       KC_NO,    M(NM),   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),
+       KC_TRNS,  M(X),    M(Fr),   M(Pr),   M(Lr),   M(Tr),   M(Dr),
+                 M(X),    M(Rr),   M(Br),   M(Gr),   M(Sr),   M(Zr),
+       KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+                          M(Er),   M(Ur),   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   KC_NO,  
+       KC_NO,  
+       KC_NO,   KC_NO,   KC_NO
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+uint8_t chord[4] = {0,0,0,0};
+uint8_t pressed_count = 0;
+
+void send_chord(void)
+{
+  for(uint8_t i = 0; i < 4; i++)
+  {
+    if(chord[i])
+      virtser_send(chord[i]);
+  }
+  virtser_send(0);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+  // We need to track keypresses in all modes, in case the user
+  // changes mode whilst pressing other keys.
+  if (record->event.pressed)
+    pressed_count++;
+  else
+    pressed_count--;
+  return true;
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+
+  if (record->event.pressed) {
+    uint8_t grp = (id & GRPMASK) >> 6;
+    chord[grp] |= id;
+  }
+  else {
+    if (pressed_count == 0) {
+      send_chord();
+      chord[0] = chord[1] = chord[2] = chord[3] = 0;
+    }
+  }
+  return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/ergodox/keymaps/steno/readme.md b/keyboards/ergodox/keymaps/steno/readme.md
new file mode 100644
index 0000000000..d67cde2a3c
--- /dev/null
+++ b/keyboards/ergodox/keymaps/steno/readme.md
@@ -0,0 +1,92 @@
+# ErgoDox EZ Steno Configuration
+
+This layout has a layer that uses the TxBolt Stenograph protocol over a Virtual Serial port. It requires something like Plover in order to function.
+
+In Plover, you can select TX Bolt as the Stenotype Machine, and find the COM port that was assigned. In this way, your regular keyboard will still function normally, and you can switch back and forth between the Steno and Keyboard layers.
+
+<pre><code>
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 2: Media keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 3: TxBolt (Serial)
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   A  |   O  |------|       |------|   E  |   U  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+</code></pre>
-- 
cgit v1.2.3


From ec62cbe384c7366b90e913d83bed3ba3325406df Mon Sep 17 00:00:00 2001
From: Jason Green <jason@jasg.org>
Date: Tue, 23 Aug 2016 04:32:40 +0000
Subject: add missing #include

---
 keyboards/ergodox/keymaps/steno/keymap.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c
index f885ac575a..399059d5f4 100644
--- a/keyboards/ergodox/keymaps/steno/keymap.c
+++ b/keyboards/ergodox/keymaps/steno/keymap.c
@@ -3,6 +3,7 @@
 #include "action_layer.h"
 #include "lufa.h"
 #include "sendchar.h"
+#include "virtser.h"
 
 #define BASE 0 // default layer
 #define SYMB 1 // symbols
-- 
cgit v1.2.3


From 104ca8a5e1a9f3a30c0fa149556b5424684905dd Mon Sep 17 00:00:00 2001
From: Jason Green <jason@jasg.org>
Date: Tue, 23 Aug 2016 04:49:05 +0000
Subject: Remove unneeded include

---
 keyboards/ergodox/keymaps/steno/keymap.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c
index 399059d5f4..3e9830905c 100644
--- a/keyboards/ergodox/keymaps/steno/keymap.c
+++ b/keyboards/ergodox/keymaps/steno/keymap.c
@@ -1,7 +1,6 @@
 #include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
-#include "lufa.h"
 #include "sendchar.h"
 #include "virtser.h"
 
-- 
cgit v1.2.3


From feebc58d327b969fe1ef11cd5b5989a60c51ac87 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Tue, 23 Aug 2016 09:42:11 +0300
Subject: Split kitten_paw into Makefile/rules.mk

---
 keyboards/kitten_paw/Makefile | 76 +------------------------------------------
 keyboards/kitten_paw/rules.mk | 72 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 73 insertions(+), 75 deletions(-)
 create mode 100644 keyboards/kitten_paw/rules.mk

(limited to 'keyboards')

diff --git a/keyboards/kitten_paw/Makefile b/keyboards/kitten_paw/Makefile
index 9122921737..57b2ef62e5 100644
--- a/keyboards/kitten_paw/Makefile
+++ b/keyboards/kitten_paw/Makefile
@@ -1,77 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u2
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-	OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c led.c
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
-
diff --git a/keyboards/kitten_paw/rules.mk b/keyboards/kitten_paw/rules.mk
new file mode 100644
index 0000000000..dab7cabc52
--- /dev/null
+++ b/keyboards/kitten_paw/rules.mk
@@ -0,0 +1,72 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+	OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c led.c
-- 
cgit v1.2.3


From 7009112752ed0729b9c20382c936a8d373062ada Mon Sep 17 00:00:00 2001
From: Jason Green <jason@jasg.org>
Date: Tue, 23 Aug 2016 07:02:44 +0000
Subject: move to ergodox-ez only

---
 keyboards/ergodox/ez/keymaps/steno/Makefile  |   3 +
 keyboards/ergodox/ez/keymaps/steno/keymap.c  | 324 +++++++++++++++++++++++++++
 keyboards/ergodox/ez/keymaps/steno/readme.md |  92 ++++++++
 keyboards/ergodox/keymaps/steno/Makefile     |   3 -
 keyboards/ergodox/keymaps/steno/keymap.c     | 324 ---------------------------
 keyboards/ergodox/keymaps/steno/readme.md    |  92 --------
 6 files changed, 419 insertions(+), 419 deletions(-)
 create mode 100644 keyboards/ergodox/ez/keymaps/steno/Makefile
 create mode 100644 keyboards/ergodox/ez/keymaps/steno/keymap.c
 create mode 100644 keyboards/ergodox/ez/keymaps/steno/readme.md
 delete mode 100644 keyboards/ergodox/keymaps/steno/Makefile
 delete mode 100644 keyboards/ergodox/keymaps/steno/keymap.c
 delete mode 100644 keyboards/ergodox/keymaps/steno/readme.md

(limited to 'keyboards')

diff --git a/keyboards/ergodox/ez/keymaps/steno/Makefile b/keyboards/ergodox/ez/keymaps/steno/Makefile
new file mode 100644
index 0000000000..b6fb9b1a80
--- /dev/null
+++ b/keyboards/ergodox/ez/keymaps/steno/Makefile
@@ -0,0 +1,3 @@
+VIRTSER_ENABLE = yes
+# Not enough interupts, so something has to go
+MOUSEKEY_ENABLE = no
diff --git a/keyboards/ergodox/ez/keymaps/steno/keymap.c b/keyboards/ergodox/ez/keymaps/steno/keymap.c
new file mode 100644
index 0000000000..3e9830905c
--- /dev/null
+++ b/keyboards/ergodox/ez/keymaps/steno/keymap.c
@@ -0,0 +1,324 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "sendchar.h"
+#include "virtser.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+#define TXBOLT 3 // TxBolt Steno Virtual Serial
+#define TXBOLT2 4 // TxBolt Steno Virtual Serial Alternative Layout
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   ALL_T(KC_NO),
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
+                                              ALT_T(KC_APP),  KC_LGUI,
+                                                              KC_HOME,
+                                               KC_SPC,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
+             TG(TXBOLT),  KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+             MEH_T(KC_NO),KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                                  KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
+             KC_LALT,        CTL_T(KC_ESC),
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       M(0),   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+// TxBolt Codes
+#define Sl 0b00000001
+#define Tl 0b00000010
+#define Kl 0b00000100
+#define Pl 0b00001000
+#define Wl 0b00010000
+#define Hl 0b00100000
+#define Rl 0b01000001
+#define Al 0b01000010
+#define Ol 0b01000100
+#define X  0b01001000
+#define Er 0b01010000
+#define Ur 0b01100000
+#define Fr 0b10000001
+#define Rr 0b10000010
+#define Pr 0b10000100
+#define Br 0b10001000
+#define Lr 0b10010000
+#define Gr 0b10100000
+#define Tr 0b11000001
+#define Sr 0b11000010
+#define Dr 0b11000100
+#define Zr 0b11001000
+#define NM 0b11010000
+#define GRPMASK 0b11000000
+#define GRP0 0b00000000
+#define GRP1 0b01000000
+#define GRP2 0b10000000
+#define GRP3 0b11000000
+/* Keymap 3: TxBolt (Serial)
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   A  |   O  |------|       |------|   E  |   U  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// TxBolt over Serial
+[TXBOLT] = KEYMAP(
+       KC_BSPC, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),  KC_NO,  
+       KC_NO,   M(Sl),   M(Tl),   M(Pl),   M(Hl),   M(X),
+       KC_NO,   M(Sl),   M(Kl),   M(Wl),   M(Rl),   M(X),   KC_NO,
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+                                           KC_NO,   KC_NO,  
+                                                    KC_NO,  
+                                  M(Al),   M(Ol),   KC_NO,  
+    // right hand
+       KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_TRNS,  M(NM),   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),
+                 M(X),    M(Fr),   M(Pr),   M(Lr),   M(Tr),   M(Dr),
+       KC_NO,    M(X),    M(Rr),   M(Br),   M(Gr),   M(Sr),   M(Zr),
+                          KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   KC_NO,  
+       KC_NO,  
+       KC_NO,   M(Er),   M(Ur)
+),
+/* Keymap 4: TxBolt (Serial) Alternative
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |      |           |      |   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |------|           |------|   *  |   R  |   B  |   G  |   S  |   Z    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |   A  |   O  |                                       |   E  |   U  |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// TxBolt over Serial
+[TXBOLT2] = KEYMAP(
+       KC_NO,   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),  KC_NO,  
+       KC_NO,   M(Sl),   M(Tl),   M(Pl),   M(Hl),   M(X),   KC_NO,  
+       KC_NO,   M(Sl),   M(Kl),   M(Wl),   M(Rl),   M(X),
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   KC_NO,   KC_NO,   M(Al),   M(Ol),
+                                           KC_NO,   KC_NO,  
+                                                    KC_NO,  
+                                  KC_NO,   KC_NO,   KC_NO,  
+    // right hand
+       KC_NO,    M(NM),   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),
+       KC_TRNS,  M(X),    M(Fr),   M(Pr),   M(Lr),   M(Tr),   M(Dr),
+                 M(X),    M(Rr),   M(Br),   M(Gr),   M(Sr),   M(Zr),
+       KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
+                          M(Er),   M(Ur),   KC_NO,   KC_NO,   KC_NO,  
+       KC_NO,   KC_NO,  
+       KC_NO,  
+       KC_NO,   KC_NO,   KC_NO
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+uint8_t chord[4] = {0,0,0,0};
+uint8_t pressed_count = 0;
+
+void send_chord(void)
+{
+  for(uint8_t i = 0; i < 4; i++)
+  {
+    if(chord[i])
+      virtser_send(chord[i]);
+  }
+  virtser_send(0);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+  // We need to track keypresses in all modes, in case the user
+  // changes mode whilst pressing other keys.
+  if (record->event.pressed)
+    pressed_count++;
+  else
+    pressed_count--;
+  return true;
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+
+  if (record->event.pressed) {
+    uint8_t grp = (id & GRPMASK) >> 6;
+    chord[grp] |= id;
+  }
+  else {
+    if (pressed_count == 0) {
+      send_chord();
+      chord[0] = chord[1] = chord[2] = chord[3] = 0;
+    }
+  }
+  return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/ergodox/ez/keymaps/steno/readme.md b/keyboards/ergodox/ez/keymaps/steno/readme.md
new file mode 100644
index 0000000000..d67cde2a3c
--- /dev/null
+++ b/keyboards/ergodox/ez/keymaps/steno/readme.md
@@ -0,0 +1,92 @@
+# ErgoDox EZ Steno Configuration
+
+This layout has a layer that uses the TxBolt Stenograph protocol over a Virtual Serial port. It requires something like Plover in order to function.
+
+In Plover, you can select TX Bolt as the Stenotype Machine, and find the COM port that was assigned. In this way, your regular keyboard will still function normally, and you can switch back and forth between the Steno and Keyboard layers.
+
+<pre><code>
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 2: Media keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+/* Keymap 3: TxBolt (Serial)
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   A  |   O  |------|       |------|   E  |   U  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+</code></pre>
diff --git a/keyboards/ergodox/keymaps/steno/Makefile b/keyboards/ergodox/keymaps/steno/Makefile
deleted file mode 100644
index b6fb9b1a80..0000000000
--- a/keyboards/ergodox/keymaps/steno/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-VIRTSER_ENABLE = yes
-# Not enough interupts, so something has to go
-MOUSEKEY_ENABLE = no
diff --git a/keyboards/ergodox/keymaps/steno/keymap.c b/keyboards/ergodox/keymaps/steno/keymap.c
deleted file mode 100644
index 3e9830905c..0000000000
--- a/keyboards/ergodox/keymaps/steno/keymap.c
+++ /dev/null
@@ -1,324 +0,0 @@
-#include "ergodox.h"
-#include "debug.h"
-#include "action_layer.h"
-#include "sendchar.h"
-#include "virtser.h"
-
-#define BASE 0 // default layer
-#define SYMB 1 // symbols
-#define MDIA 2 // media keys
-#define TXBOLT 3 // TxBolt Steno Virtual Serial
-#define TXBOLT2 4 // TxBolt Steno Virtual Serial Alternative Layout
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap 0: Basic layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
- * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
- * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
- * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
- *                                 ,------|------|------|       |------+--------+------.
- *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |      |ace   | End  |       | PgDn |        |      |
- *                                 `--------------------'       `----------------------'
- */
-// If it accepts an argument (i.e, is a function), it doesn't need KC_.
-// Otherwise, it needs KC_*
-[BASE] = KEYMAP(  // layer 0 : default
-        // left hand
-        KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
-        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
-        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   ALL_T(KC_NO),
-        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
-                                              ALT_T(KC_APP),  KC_LGUI,
-                                                              KC_HOME,
-                                               KC_SPC,KC_BSPC,KC_END,
-        // right hand
-             KC_RGHT,     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
-             TG(TXBOLT),  KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
-                          KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
-             MEH_T(KC_NO),KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
-                                  KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
-             KC_LALT,        CTL_T(KC_ESC),
-             KC_PGUP,
-             KC_PGDN,KC_TAB, KC_ENT
-    ),
-/* Keymap 1: Symbol Layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// SYMBOLS
-[SYMB] = KEYMAP(
-       // left hand
-       M(0),   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
-       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
-       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
-       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
-       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-                                       KC_TRNS,KC_TRNS,
-                                               KC_TRNS,
-                               KC_TRNS,KC_TRNS,KC_TRNS,
-       // right hand
-       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
-       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
-                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
-       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
-                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS
-),
-/* Keymap 2: Media and mouse keys
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |Brwser|
- *                                 |      |      |------|       |------|      |Back  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// MEDIA AND MOUSE
-[MDIA] = KEYMAP(
-       RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
-                                           KC_TRNS, KC_TRNS,
-                                                    KC_TRNS,
-                                  KC_TRNS, KC_TRNS, KC_TRNS,
-    // right hand
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
-                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_WBAK
-),
-// TxBolt Codes
-#define Sl 0b00000001
-#define Tl 0b00000010
-#define Kl 0b00000100
-#define Pl 0b00001000
-#define Wl 0b00010000
-#define Hl 0b00100000
-#define Rl 0b01000001
-#define Al 0b01000010
-#define Ol 0b01000100
-#define X  0b01001000
-#define Er 0b01010000
-#define Ur 0b01100000
-#define Fr 0b10000001
-#define Rr 0b10000010
-#define Pr 0b10000100
-#define Br 0b10001000
-#define Lr 0b10010000
-#define Gr 0b10100000
-#define Tr 0b11000001
-#define Sr 0b11000010
-#define Dr 0b11000100
-#define Zr 0b11001000
-#define NM 0b11010000
-#define GRPMASK 0b11000000
-#define GRP0 0b00000000
-#define GRP1 0b01000000
-#define GRP2 0b10000000
-#define GRP3 0b11000000
-/* Keymap 3: TxBolt (Serial)
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |      |      |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |   A  |   O  |------|       |------|   E  |   U  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// TxBolt over Serial
-[TXBOLT] = KEYMAP(
-       KC_BSPC, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
-       KC_NO,   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),  KC_NO,  
-       KC_NO,   M(Sl),   M(Tl),   M(Pl),   M(Hl),   M(X),
-       KC_NO,   M(Sl),   M(Kl),   M(Wl),   M(Rl),   M(X),   KC_NO,
-       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                                           KC_NO,   KC_NO,  
-                                                    KC_NO,  
-                                  M(Al),   M(Ol),   KC_NO,  
-    // right hand
-       KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
-       KC_TRNS,  M(NM),   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),
-                 M(X),    M(Fr),   M(Pr),   M(Lr),   M(Tr),   M(Dr),
-       KC_NO,    M(X),    M(Rr),   M(Br),   M(Gr),   M(Sr),   M(Zr),
-                          KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
-       KC_NO,   KC_NO,  
-       KC_NO,  
-       KC_NO,   M(Er),   M(Ur)
-),
-/* Keymap 4: TxBolt (Serial) Alternative
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   S  |   T  |   P  |   H  |   *  |      |           |      |   *  |   F  |   P  |   L  |   T  |   D    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   S  |   K  |   W  |   R  |   *  |------|           |------|   *  |   R  |   B  |   G  |   S  |   Z    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |   A  |   O  |                                       |   E  |   U  |      |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-// TxBolt over Serial
-[TXBOLT2] = KEYMAP(
-       KC_NO,   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),  KC_NO,  
-       KC_NO,   M(Sl),   M(Tl),   M(Pl),   M(Hl),   M(X),   KC_NO,  
-       KC_NO,   M(Sl),   M(Kl),   M(Wl),   M(Rl),   M(X),
-       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
-       KC_NO,   KC_NO,   KC_NO,   M(Al),   M(Ol),
-                                           KC_NO,   KC_NO,  
-                                                    KC_NO,  
-                                  KC_NO,   KC_NO,   KC_NO,  
-    // right hand
-       KC_NO,    M(NM),   M(NM),   M(NM),   M(NM),   M(NM),   M(NM),
-       KC_TRNS,  M(X),    M(Fr),   M(Pr),   M(Lr),   M(Tr),   M(Dr),
-                 M(X),    M(Rr),   M(Br),   M(Gr),   M(Sr),   M(Zr),
-       KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  
-                          M(Er),   M(Ur),   KC_NO,   KC_NO,   KC_NO,  
-       KC_NO,   KC_NO,  
-       KC_NO,  
-       KC_NO,   KC_NO,   KC_NO
-),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
-};
-
-uint8_t chord[4] = {0,0,0,0};
-uint8_t pressed_count = 0;
-
-void send_chord(void)
-{
-  for(uint8_t i = 0; i < 4; i++)
-  {
-    if(chord[i])
-      virtser_send(chord[i]);
-  }
-  virtser_send(0);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record)
-{
-  // We need to track keypresses in all modes, in case the user
-  // changes mode whilst pressing other keys.
-  if (record->event.pressed)
-    pressed_count++;
-  else
-    pressed_count--;
-  return true;
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-
-  if (record->event.pressed) {
-    uint8_t grp = (id & GRPMASK) >> 6;
-    chord[grp] |= id;
-  }
-  else {
-    if (pressed_count == 0) {
-      send_chord();
-      chord[0] = chord[1] = chord[2] = chord[3] = 0;
-    }
-  }
-  return MACRO_NONE;
-};
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-
-    uint8_t layer = biton32(layer_state);
-
-    ergodox_board_led_off();
-    ergodox_right_led_1_off();
-    ergodox_right_led_2_off();
-    ergodox_right_led_3_off();
-    switch (layer) {
-      // TODO: Make this relevant to the ErgoDox EZ.
-        case 1:
-            ergodox_right_led_1_on();
-            break;
-        case 2:
-            ergodox_right_led_2_on();
-            break;
-        default:
-            // none
-            break;
-    }
-
-};
diff --git a/keyboards/ergodox/keymaps/steno/readme.md b/keyboards/ergodox/keymaps/steno/readme.md
deleted file mode 100644
index d67cde2a3c..0000000000
--- a/keyboards/ergodox/keymaps/steno/readme.md
+++ /dev/null
@@ -1,92 +0,0 @@
-# ErgoDox EZ Steno Configuration
-
-This layout has a layer that uses the TxBolt Stenograph protocol over a Virtual Serial port. It requires something like Plover in order to function.
-
-In Plover, you can select TX Bolt as the Stenotype Machine, and find the COM port that was assigned. In this way, your regular keyboard will still function normally, and you can switch back and forth between the Steno and Keyboard layers.
-
-<pre><code>
-/* Keymap 0: Basic layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  TX  |   Y  |   U  |   I  |   O  |   P  |   \    |
- * |--------+------+------+------+------+------|      |           | BOLT |------+------+------+------+------+--------|
- * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
- * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
- *                                 ,------|------|------|       |------+--------+------.
- *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |      |ace   | End  |       | PgDn |        |      |
- *                                 `--------------------'       `----------------------'
- */
-/* Keymap 1: Symbol Layer
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |      |      |------|       |------|      |      |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-/* Keymap 2: Media keys
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | RESET  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |------|           |------|      |      |      |      |      |  Play  |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |VolUp |VolDn | Mute |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |Brwser|
- *                                 |      |      |------|       |------|      |Back  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-/* Keymap 3: TxBolt (Serial)
- *
- * ,--------------------------------------------------.           ,--------------------------------------------------.
- * | BKSPC  |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |   #  |   #  |   #  |   #  |   #  |      |           |      |   #  |   #  |   #  |   #  |   #  |   #    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   S  |   T  |   P  |   H  |   *  |------|           |------|   *  |   F  |   P  |   L  |   T  |   D    |
- * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |   S  |   K  |   W  |   R  |   *  |      |           |      |   *  |   R  |   B  |   G  |   S  |   Z    |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |      |      |      |      |
- *   `----------------------------------'                                       `----------------------------------'
- *                                        ,-------------.       ,-------------.
- *                                        |      |      |       |      |      |
- *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |      |
- *                                 |   A  |   O  |------|       |------|   E  |   U  |
- *                                 |      |      |      |       |      |      |      |
- *                                 `--------------------'       `--------------------'
- */
-</code></pre>
-- 
cgit v1.2.3


From 06c82a063bd668cb0b5b80d455c6fd7384131c86 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ren=C3=A9=20Werner?= <mail@renewerner.net>
Date: Tue, 23 Aug 2016 12:15:29 +0200
Subject: Fixed wrong keycode in default keymap

Where I used KC_MENU I should have used KC_APP instead.
---
 keyboards/kitten_paw/keymaps/default/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/kitten_paw/keymaps/default/keymap.c b/keyboards/kitten_paw/keymaps/default/keymap.c
index f672357455..64aa672d0a 100644
--- a/keyboards/kitten_paw/keymaps/default/keymap.c
+++ b/keyboards/kitten_paw/keymaps/default/keymap.c
@@ -11,7 +11,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,   KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
       KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
       KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,            KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
-      KC_LCTL,KC_LGUI,KC_LALT,                 KC_SPC,                                KC_RALT,KC_RGUI,KC_MENU,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT)
+      KC_LCTL,KC_LGUI,KC_LALT,                 KC_SPC,                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT)
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-- 
cgit v1.2.3


From 6a61c89477678e3df9aba9189b3dd67fc24e94ab Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ren=C3=A9=20Werner?= <mail@renewerner.net>
Date: Tue, 23 Aug 2016 13:20:59 +0200
Subject: added my personal keymap

I ported my keymap from tmk to QMK.
---
 keyboards/kitten_paw/keymaps/ickerwx/config.h |  31 ++++
 keyboards/kitten_paw/keymaps/ickerwx/keymap.c | 220 ++++++++++++++++++++++++++
 2 files changed, 251 insertions(+)
 create mode 100644 keyboards/kitten_paw/keymaps/ickerwx/config.h
 create mode 100644 keyboards/kitten_paw/keymaps/ickerwx/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/kitten_paw/keymaps/ickerwx/config.h b/keyboards/kitten_paw/keymaps/ickerwx/config.h
new file mode 100644
index 0000000000..04a2d253c7
--- /dev/null
+++ b/keyboards/kitten_paw/keymaps/ickerwx/config.h
@@ -0,0 +1,31 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#undef MOUSEKEY_MOVE_MAX
+#define MOUSEKEY_MOVE_MAX       127
+#undef MOUSEKEY_WHEEL_MAX
+#define MOUSEKEY_WHEEL_MAX      110
+#undef MOUSEKEY_MOVE_DELTA
+#define MOUSEKEY_MOVE_DELTA     5
+#undef MOUSEKEY_WHEEL_DELTA
+#define MOUSEKEY_WHEEL_DELTA    1
+#undef MOUSEKEY_DELAY
+#define MOUSEKEY_DELAY 50
+#undef MOUSEKEY_INTERVAL
+#define MOUSEKEY_INTERVAL 20
+#undef MOUSEKEY_MAX_SPEED
+#define MOUSEKEY_MAX_SPEED 4
+#undef MOUSEKEY_TIME_TO_MAX
+#define MOUSEKEY_TIME_TO_MAX 30
+#undef MOUSEKEY_WHEEL_MAX_SPEED
+#define MOUSEKEY_WHEEL_MAX_SPEED 3
+#undef MOUSEKEY_WHEEL_TIME_TO_MAX
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 1000
+#undef ONESHOT_TIMEOUT
+#define ONESHOT_TIMEOUT 500
+#undef TAPPING_TOGGLE
+#define TAPPING_TOGGLE 2
+
+#endif
diff --git a/keyboards/kitten_paw/keymaps/ickerwx/keymap.c b/keyboards/kitten_paw/keymaps/ickerwx/keymap.c
new file mode 100644
index 0000000000..276fc30a80
--- /dev/null
+++ b/keyboards/kitten_paw/keymaps/ickerwx/keymap.c
@@ -0,0 +1,220 @@
+#include "kitten_paw.h"
+#include "mousekey.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define LC LCTL
+#define KC_SLCT KC_SELECT
+
+enum layers {
+    DEFAULT,
+    PROG1,
+    PROG2,
+    MEDIA,
+    MOUSE1,
+    MOUSE2,
+    MISC,
+};
+
+enum function_id {
+    LSHFT_PAREN,
+    RSHFT_PAREN,
+    LCTRL_BRACKET,
+    RCTRL_BRACKET,
+    LALT_CURLY,
+    RALT_CURLY,
+    CTRL_CLICK
+};
+
+enum macro_id {
+    GRV,
+    CFLEX
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [DEFAULT] = KEYMAP(\
+       KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,    KC_F10,    KC_F11,               KC_F12,          KC_PSCR,KC_SLCK,KC_PAUS,                        \
+       KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,      KC_0,   KC_MINS,               KC_EQL,KC_BSPC,   KC_INS,KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+       KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,      KC_P,   KC_LBRC,              KC_RBRC,KC_BSLS,   KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
+         F(0),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,   KC_QUOT,                       KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
+         F(8),KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM,    KC_DOT,   KC_SLSH,                         F(9),            KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
+         F(1),KC_LGUI,   F(3),               LT(MISC, KC_SPC),                              F(4),      F(5),  LT(MEDIA,   KC_APP),   F(2),  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT),
+  /* Layer 1: Programming Layer 1, emulating US layout */
+  [PROG1] = KEYMAP(\
+       KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,   _______,   _______,                _______,_______,_______,                         \
+       M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,   KC_SLSH,   S(KC_0),      _______,  _______,_______,_______,  _______,_______,_______,_______, \
+      _______,_______,_______,_______,_______,_______,   KC_Z,_______,_______,_______,   _______,RALT(KC_8),RALT(KC_9),RALT(KC_MINS),  _______,_______,_______,  _______,_______,_______,_______, \
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(KC_COMM),S(KC_BSLS),                 _______,                            _______,_______,_______,      \
+    MO(PROG2),_______,   KC_Y,_______,_______,_______,_______,_______,_______,_______,   _______,   S(KC_7),               MO(PROG2),          _______,          _______,_______,_______,_______, \
+      _______,_______,_______,                        _______,                           _______,   _______,   _______,      _______,  _______,_______,_______,  _______,_______),
+    /* Layer 2: programming layer 2
+       all keys that are not FN keys are sent as LSFT+key on this layer
+    */
+  [PROG2] = KEYMAP(\
+      _______,   _______,   _______,_______,_______,_______, _______,_______,   _______,_______,   _______,    _______,   _______,                _______,_______,_______,                        \
+RALT(KC_RBRC),   _______,RALT(KC_Q),KC_BSLS,_______,_______,M(CFLEX),S(KC_6),S(KC_RBRC),S(KC_8),   S(KC_9), S(KC_SLSH),   KC_RBRC,      _______,  _______,_______,_______,  _______,_______,_______,_______, \
+      _______,   _______,   _______,_______,_______,_______, _______,_______,   _______,_______,   _______, RALT(KC_7),RALT(KC_0),RALT(KC_NUBS),  _______,_______,_______,  _______,_______,_______,_______, \
+      _______,   _______,   _______,_______,_______,_______, _______,_______,   _______,_______, S(KC_DOT),    S(KC_2),                 _______,                            _______,_______,_______,      \
+      _______,S(KC_NUBS),   _______,_______,_______,_______, _______,_______,   _______,KC_NUBS,S(KC_NUBS), S(KC_MINS),                 _______,          _______,          _______,_______,_______,_______, \
+      _______,   _______,   _______,                         _______,                              _______,    _______,   _______,      _______,  _______,_______,_______,  _______,_______),          \
+    /* Layer 3: media layer */
+  [MEDIA] = KEYMAP(\
+          KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,          XXXXXXX,XXXXXXX,XXXXXXX,                   \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  KC_MPRV,KC_MPLY,KC_MNXT,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  KC_VOLD,KC_MUTE,KC_VOLU,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,                            XXXXXXX,XXXXXXX,XXXXXXX,      \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,          KC_EJCT,          XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,XXXXXXX,XXXXXXX,                        XXXXXXX,                        XXXXXXX,XXXXXXX,_______,XXXXXXX,  KC_MRWD,KC_MSTP,KC_MFFD,  XXXXXXX,XXXXXXX),
+    /* Layer 4: Mouse layer */
+  [MOUSE1] = KEYMAP(\
+            F(6),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,          XXXXXXX,XXXXXXX,XXXXXXX,                         \
+         XXXXXXX,KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,KC_BSPC,   KC_INS,KC_HOME,KC_PGUP,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,KC_BTN4, KC_WH_D, KC_MS_U, KC_WH_U, XXXXXXX,   KC_Y,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,   KC_DEL, KC_END,KC_PGDN,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+            F(0),KC_BTN5, KC_MS_L, KC_MS_D, KC_MS_R,    F(7),KC_WH_L,KC_WH_D,KC_WH_U,    KC_WH_R,    XXXXXXX,XXXXXXX,        KC_BTN1,                            XXXXXXX,XXXXXXX,XXXXXXX,      \
+      MO(MOUSE2),XXXXXXX,LC(KC_Y),LC(KC_X),LC(KC_C),LC(KC_V),XXXXXXX,KC_BTN2,KC_BTN3,LC(KC_PGUP),LC(KC_PGDN),XXXXXXX,        KC_RSFT,            KC_UP,          XXXXXXX,XXXXXXX,XXXXXXX,KC_PENT, \
+         KC_LCTL,KC_LGUI,KC_LALT,                            KC_BTN1,                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,  XXXXXXX,XXXXXXX),
+    /* Layer 5: Mouse layer 2*/
+  [MOUSE2] = KEYMAP(\
+         _______,_______,_______,  _______, _______, _______,_______,_______,_______,   _______,     _______,_______,_______,          _______,_______,_______,                         \
+         _______,_______,_______,  _______, _______, _______,_______,_______,_______,   _______,     _______,_______,_______,_______,  _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,KC_BTN2,  KC_WH_U, KC_BTN3, _______,_______,_______,_______,   _______,     _______,_______,_______,_______,  _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,KC_WH_L,  KC_WH_D, KC_WH_R, _______,KC_MS_L,KC_MS_D,KC_MS_U,   KC_MS_R,     _______,_______,        _______,                            _______,_______,_______,      \
+         _______,_______,_______,  _______, _______, _______,_______,_______,_______,   _______,     _______,_______,        _______,          _______,          _______,_______,_______,_______, \
+         _______,_______,_______,                            _______,                                _______,_______,_______,_______,  _______,_______,_______,  _______,_______),
+    /* Layer 6: Misc layer */
+  [MISC] = KEYMAP(\
+         XXXXXXX, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17, KC_F18, KC_F19, KC_F20,     KC_F21,     KC_F22, KC_F23, KC_F24,          XXXXXXX,XXXXXXX,XXXXXXX,                         \
+         XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,KC_SLCT,LC(KC_W),   KC_UP, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,KC_BSPC,     KC_DEL,    XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX,KC_HOME,KC_PGDN,KC_PGUP,    XXXXXXX,    XXXXXXX,XXXXXXX,        XXXXXXX,                            XXXXXXX,XXXXXXX,XXXXXXX,      \
+         KC_LSFT,XXXXXXX,LC(KC_Y),LC(KC_X),LC(KC_C),LC(KC_V), KC_SPC, KC_END,XXXXXXX,LC(KC_PGUP),LC(KC_PGDN),XXXXXXX,        KC_RSFT,          XXXXXXX,          XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         KC_LCTL,KC_LGUI, KC_LALT,                  LT(MISC, KC_SPC),                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE1), // toggle enable mouse layer (4)
+    [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET),  // tap to print [
+    [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET),  // tap to print ]
+    [3] = ACTION_FUNCTION_TAP(LALT_CURLY),  // tap to print {
+    [4] = ACTION_FUNCTION_TAP(RALT_CURLY),  // tap to print }
+    [5] = ACTION_LAYER_TAP_TOGGLE(PROG1), // toggle programming layer 1 (1)
+    [6] = ACTION_LAYER_SET_CLEAR(DEFAULT),
+    [7] = ACTION_FUNCTION_TAP(CTRL_CLICK),
+    [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN),  // tap to print (
+    [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN),  // tap to print )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case GRV: // macro to print accent grave
+            return (record->event.pressed ?
+                    MACRO( D(LSFT), T(EQL), U(RALT), T(SPC), END) :
+                    MACRO_NONE );
+        case CFLEX: // print accent circonflex
+            return (record->event.pressed ?
+                    MACRO( T(GRV), T(SPC), END ) :
+                    MACRO_NONE );
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint16_t macro_kc ) {
+  if (record->event.pressed) {
+      if (record->tap.count > 0 && !record->tap.interrupted) {
+          if (record->tap.interrupted) {
+              register_mods(MOD_BIT(orig_mod));
+          }
+      } else {
+          register_mods(MOD_BIT(orig_mod));
+      }
+  } else {
+      if (record->tap.count > 0 && !(record->tap.interrupted)) {
+          add_weak_mods(MOD_BIT(macro_mod));
+          send_keyboard_report();
+          register_code(macro_kc);
+          unregister_code(macro_kc);
+          del_weak_mods(MOD_BIT(macro_mod));
+          send_keyboard_report();
+          record->tap.count = 0;  // ad hoc: cancel tap
+      } else {
+          unregister_mods(MOD_BIT(orig_mod));
+      }
+  }
+}
+
+/* if LCTRL is tabbed, print (, or ) if RCTRL is tabbed, same for LALT/RALT and [/] */
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    // The code is copied from keymap_hasu.c in the tmk keyboards hhkb folder
+    switch (id) {
+        case LCTRL_BRACKET:
+            tap_helper(record, KC_LCTL, KC_RALT, KC_8);
+            break;
+        case RCTRL_BRACKET:
+            tap_helper(record, KC_RCTL, KC_RALT, KC_9);
+            break;
+        case LALT_CURLY:
+            tap_helper(record, KC_LALT, KC_RALT, KC_7);
+            break;
+        case RALT_CURLY:
+            tap_helper(record, KC_RALT, KC_RALT, KC_0);
+            break;
+        case LSHFT_PAREN:
+            tap_helper(record, KC_LSFT, KC_LSFT, KC_8);
+            break;
+        case RSHFT_PAREN:
+            tap_helper(record, KC_RSFT, KC_LSFT, KC_9);
+            break;
+        case CTRL_CLICK:
+            if (record->event.pressed) {
+                mousekey_clear();
+                register_mods(MOD_BIT(KC_LCTL));
+                send_keyboard_report();
+                wait_ms(5);
+                mousekey_on(KC_BTN1);
+                mousekey_send();
+                wait_ms(10);
+                mousekey_off(KC_BTN1);
+                mousekey_send();
+                wait_ms(5);
+                unregister_mods(MOD_BIT(KC_LCTL));
+                send_keyboard_report();
+            }
+            break;
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    uint8_t layer;
+    layer = biton32(layer_state);
+    if (layer == PROG2) {
+         if (keycode >= KC_A && keycode <= KC_EXSEL && \
+             !(  // do not send LSFT + these keycodes, they are needed for emulating the US layout
+                 keycode == KC_NONUS_BSLASH ||
+                 keycode == KC_RBRC ||
+                 keycode == KC_BSLS ||
+                 keycode == KC_GRV
+            )) {
+              if (record->event.pressed) {
+                  register_mods(MOD_LSFT);
+              } else {
+                  unregister_mods(MOD_LSFT);
+              }
+         }
+    }
+    return true;
+}
-- 
cgit v1.2.3


From a902206735972a15063d8d9852a87041d82d6e7b Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Tue, 23 Aug 2016 23:05:35 -0500
Subject: Nightly

Prep for Vision build
---
 keyboards/atomic/keymaps/pvc/keymap.c              |  32 +-
 keyboards/planck/keymaps/pvc/keymap.c              |  20 +-
 keyboards/vision_division/keymaps/default/Makefile |   4 +-
 keyboards/vision_division/keymaps/default/config.h |  19 +-
 keyboards/vision_division/keymaps/default/keymap.c | 632 +++++++++++++++++++--
 5 files changed, 652 insertions(+), 55 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/atomic/keymaps/pvc/keymap.c b/keyboards/atomic/keymaps/pvc/keymap.c
index f16ec8a6ec..b02e89d2c7 100644
--- a/keyboards/atomic/keymaps/pvc/keymap.c
+++ b/keyboards/atomic/keymaps/pvc/keymap.c
@@ -154,7 +154,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* UPPER
  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
- * | PRINT  | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | NUM LK | /      | *      |        | NUM LK | SCR LK | XXXXXX . PAUSE  |
+ * | PRINT  | BR TOG | BR SP+ | BR SP- | BR RST | XXXXXX | XXXXXX | NUM LK | /      | *      |        | NUM LK | SCR LK | XXXXXX . PAUSE  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
  * |        | F1     | F2     | F3     | F4     |        |        | 7      | 8      | 9      | -      |        |        |        | INS    |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
@@ -180,9 +180,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
  * |        | $      | {      | [      | (      | %      | #      | )      | ]      | }      | @      |        |        |        | INS    |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
- * |        | ^      | *      | +      | -      | ;      | :      | _      | '      | "      | `      |        | XXXXXX .        | HOME   |
+ * |        | ^      | *      | +      | -      | /      | \      | _      | '      | "      | `      |        | XXXXXX .        | HOME   |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
- * |        | |      | &      | !      | ~      | /      | \      | =      | <      | >      | ?      | XXXXXX .        |        | END    |
+ * |        | |      | &      | !      | ~      | ;      | :      | =      | <      | >      | ?      | XXXXXX .        |        | END    |
  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
  * |        |        |        |        |        |                 |        |        |        |        |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
@@ -191,16 +191,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [LAYER_LOWER]        = { // LOWER
   { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ________________  },
   { _______, KC_DLR,  KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT,   _______, _______, _______, KC_INS   },
-  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  _______, ________________, KC_HOME  },
-  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, ________________, _______, KC_END   },
+  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  _______, ________________, KC_HOME  },
+  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, ________________, _______, KC_END   },
   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______  },
  },
 
+/* FUNCTION
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * | NUM LK |        |        |        |        |        |        |        |        |        |        |        |        | XXXXXX .        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | SCR LK | F13    | F14    | F15    | F16    |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * | CAP LK | F17    | F18    | F19    | F20    |        |        |        |        |        |        |        | XXXXXX .        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * |        | F21    | F22    | F23    | F24    |        |        |        |        |        |        | XXXXXX .        | VOL UP | MUTE   |
+ * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        | PLAY/PAUSE      |        |        |        |        |        | PTRACK | VOL DN | NTRACK |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
  [LAYER_FUNCTION]     = { // FUNCTION
-  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ________________  },
-  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,  _______, KC_PAUS  },
-  { KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_PSCR  },
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_VOLU, KC_MUTE  },
+  { KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX  },
+  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  },
+  { KC_CAPS, KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, XXXXXXX  },
+  { _______, KC_F21,  KC_F22,  KC_F23,  KC_F24,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_VOLU, KC_MUTE  },
   { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT  },
  },
 
diff --git a/keyboards/planck/keymaps/pvc/keymap.c b/keyboards/planck/keymaps/pvc/keymap.c
index 2fc5f0da16..0bb7f0def2 100644
--- a/keyboards/planck/keymaps/pvc/keymap.c
+++ b/keyboards/planck/keymaps/pvc/keymap.c
@@ -166,9 +166,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * .-----------------------------------------------------------------------------------------------------------.
  * |        | $      | {      | [      | (      | %      | #      | )      | ]      | }      | @      | PG UP  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        | ^      | *      | +      | -      | ;      | :      | _      | '      | "      | `      | PG DN  |
+ * |        | ^      | *      | +      | -      | /      | \      | _      | '      | "      | `      | PG DN  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        | |      | &      | !      | ~      | /      | \      | =      | <      | >      | ?      | HOME   |
+ * |        | |      | &      | !      | ~      | ;      | :      | =      | <      | >      | ?      | HOME   |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
  * |        |        |        |        |        |        |        |        |        |        |        | END    |
  * '-----------------------------------------------------------------------------------------------------------'
@@ -176,27 +176,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
  [LAYER_LOWER]        = { // LOWER
   { _______, KC_DLR,  KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT,   KC_PGUP  },
-  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  KC_PGDN  },
-  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, KC_HOME  },
+  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  KC_PGDN  },
+  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, KC_HOME  },
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END   },
  },
 
 
 /* FUNCTION
  * .-----------------------------------------------------------------------------------------------------------.
- * | NUM LK | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | PAUSE  |
+ * | NUM LK | F13    | F14    | F15    | F16    | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | PAUSE  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | CAP LK | F11    | F12    | F13    | F14    | F15    | F16    | F17    | F18    | F19    | F20    | PRINT  |
+ * | CAP LK | F17    | F18    | F19    | F20    | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | PRINT  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MUTE   |
+ * | SCR LK | F21    | F22    | F23    | F24    | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MUTE   |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | PLAY   | PLAY   | LOWER  | VOL UP | VOL DN | NEXT   | PREV   |
  * '-----------------------------------------------------------------------------------------------------------'
  */
  [LAYER_FUNCTION]     = { // FUNCTION
-  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_PAUS  },
-  { KC_CAPS, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_PSCR  },
-  { KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE  },
+  { KC_NLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PAUS  },
+  { KC_CAPS, KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR  },
+  { KC_SLCK, KC_F21,  KC_F22,  KC_F23,  KC_F24,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE  },
   { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, KC_VOLU, KC_VOLD, KC_MPRV, KC_MNXT  },
  },
 
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
index 43fee26686..393a9e23a6 100644
--- a/keyboards/vision_division/keymaps/default/Makefile
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -1,11 +1,11 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
index c005aa8c5a..34eaaff5b7 100644
--- a/keyboards/vision_division/keymaps/default/config.h
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -22,7 +22,7 @@
 
 #define UNUSED_PINS
 
-#define KEYMAP( \
+/*#define KEYMAP( \
       k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
       k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
       k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
@@ -37,6 +37,23 @@ KEYMAP_MASTER(NUMERIC_MAX_TEENSY, NUMERIC_MAX, \
       k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \
       k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C, \
       k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, k61C  \
+)*/
+
+#define KEYMAP( \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, \
+      k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A, k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B  \
 ) \
+KEYMAP_MASTER(NUMERIC_NORMAL, HOMING_MAX_TEENSY, \
+      k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, KC_NO, KC_NO, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, KC_NO, \
+      k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, KC_NO, KC_NO, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, KC_NO, \
+      k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, KC_NO, KC_NO, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, KC_NO, \
+      k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, KC_NO, KC_NO, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, KC_NO, \
+      k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, KC_NO, KC_NO, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, KC_NO, \
+      k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, KC_NO, KC_NO, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, KC_NO  \
+)
 
 #endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/keymap.c b/keyboards/vision_division/keymaps/default/keymap.c
index 3fddee78b7..b8cef9c759 100644
--- a/keyboards/vision_division/keymaps/default/keymap.c
+++ b/keyboards/vision_division/keymaps/default/keymap.c
@@ -1,64 +1,630 @@
 #include "vision_division.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "led.h"
 
+#ifdef AUDIO_ENABLE
+    #include "audio.h"
+    #include "song_list.h"
+#endif
 
+#define LAYER_QWERTY                     0
+#define LAYER_COLEMAK                    1
+#define LAYER_DVORAK                     2
+#define LAYER_UPPER                      3
+#define LAYER_LOWER                      4
+#define LAYER_FUNCTION                   5
+#define LAYER_MOUSE                      6
+#define LAYER_ADJUST                     7
 
+#define MACRO_QWERTY                     0
+#define MACRO_COLEMAK                    1
+#define MACRO_DVORAK                     2
+#define MACRO_UPPER                      3
+#define MACRO_LOWER                      4
+#define MACRO_FUNCTION                   5
+#define MACRO_MOUSE                      6
+#define MACRO_TIMBRE_1                   7
+#define MACRO_TIMBRE_2                   8
+#define MACRO_TIMBRE_3                   9
+#define MACRO_TIMBRE_4                  10
+#define MACRO_TEMPO_U                   11
+#define MACRO_TEMPO_D                   12
+#define MACRO_TONE_DEFAULT              13
+#define MACRO_MUSIC_TOGGLE              14
+#define MACRO_AUDIO_TOGGLE              16
+#define MACRO_INC_VOICE                 18
+#define MACRO_DEC_VOICE                 19
+#define MACRO_BACKLIGHT                 20
+#define MACRO_BREATH_TOGGLE             21
+#define MACRO_BREATH_SPEED_INC          23
+#define MACRO_BREATH_SPEED_DEC          24
+#define MACRO_BREATH_DEFAULT            25
+
+#define M_QWRTY             M(MACRO_QWERTY)
+#define M_COLMK             M(MACRO_COLEMAK)
+#define M_DVORK             M(MACRO_DVORAK)
+#define M_UPPER             M(MACRO_UPPER)
+#define M_LOWER             M(MACRO_LOWER)
+#define M_FUNCT             M(MACRO_FUNCTION)
+#define M_MOUSE             M(MACRO_MOUSE)
+#define TIMBR_1             M(MACRO_TIMBRE_1)
+#define TIMBR_2             M(MACRO_TIMBRE_2)
+#define TIMBR_3             M(MACRO_TIMBRE_3)
+#define TIMBR_4             M(MACRO_TIMBRE_4)
+#define TMPO_UP             M(MACRO_TEMPO_U)
+#define TMPO_DN             M(MACRO_TEMPO_D)
+#define TMPO_DF             M(MACRO_TONE_DEFAULT)
+#define M_BACKL             M(MACRO_BACKLIGHT)
+#define M_BRTOG             M(MACRO_BREATH_TOGGLE)
+#define M_BSPDU             M(MACRO_BREATH_SPEED_INC)
+#define M_BSPDD             M(MACRO_BREATH_SPEED_DEC)
+#define M_BDFLT             M(MACRO_BREATH_DEFAULT)
+
+
+#define VC_UP               M(MACRO_INC_VOICE)
+#define VC_DOWN             M(MACRO_DEC_VOICE)
+
+
+#define SC_UNDO             LCTL(KC_Z)
+#define SC_REDO             LCTL(KC_Y)
+#define SC_CUT              LCTL(KC_X)
+#define SC_COPY             LCTL(KC_C)
+#define SC_PSTE             LCTL(KC_V)
+#define SC_SELA             LCTL(KC_A)
+#define SC_SAVE             LCTL(KC_S)
+#define SC_OPEN             LCTL(KC_O)
+#define SC_ACLS             LALT(KC_F4)
+#define SC_CCLS             LCTL(KC_F4)
+
+#define OS_SHFT             KC_FN0
+
+#define _______             KC_TRNS
+#define XXXXXXX             KC_NO
+#define ________________    _______, _______
+#define XXXXXXXXXXXXXXXX    XXXXXXX, XXXXXXX
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [0] = KEYMAP( \
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12  \
+
+KEYMAP( \
+      KC_VOLD, KC_MUTE, KC_VOLU, XXXXXXX,       KC_F1,   KC_F2,   KC_F3,   KC_F4,   XXXXXXX, KC_F5,   KC_F6,   KC_F7,   KC_F8,   XXXXXXX, KC_F9,   KC_F10,  KC_F11,  KC_F12,        KC_PSCR, KC_SLCK, KC_PAUS, \
+      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,       KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_EQL,  KC_BSPC,       KC_INS,  KC_HOME, KC_PGUP, \
+      KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS,       KC_TAB,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_MINS, KC_BSLS,       KC_DEL,  KC_END,  KC_PGDN, \
+      KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS,       KC_CAPS, KC_BSPC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,        XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT,       KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT,       XXXXXXX, KC_UP,   XXXXXXX, \
+      KC_KP_0, KC_KP_0, KC_PDOT, KC_PENT,       KC_LCTL, KC_LCTL, XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC,  KC_SPC,  XXXXXXX, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_RCTL,       KC_LEFT, KC_DOWN, KC_RGHT  \
 )
 
-/*
-      KC_VOLU, KC_MUTE, KC_VOLU, KC_F24,           KC_F20,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12     k119, k11A, k11B, k11C, \
-      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,          KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,       k219, k21A, k21B, k21C, \
-      KC_KP_7, KC_KP_8, KC_KP_9, KC_F23,           KC_F19,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,       k319, k31A, k31B, k31C, \
-      KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS,          KC_F18,  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP,       k419, k41A, k41B, k41C, \
-      KC_KP_1, KC_KP_2, KC_KP_3, KC_F22,           KC_F17,  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN,       k519, k51A, k51B, k51C. \
-      KC_KP_0, KC_F21,  KC_PDOT, KC_PENT,          KC_F16,  KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT,       k619, k61A, k61B, k61C  \
 
-    ) //-----, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------,
+//  [LAYER_QWERTY]       = { // QWERTY
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+//   { KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+//  },
+
+
+// /* Numeric Max / Homing Normal - Traditional
+//  * .-----------------------------------.       .-----------------------------------.        .-----------------_-----------------.        .-----------------------------------.       .--------------------------.
+//  * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+//  * '-----------------------------------'       '-----------------------------------'        '-----------------------------------'        '-----------------------------------'       '--------------------------'
+//  * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .--------------------------.
+//  * |        |        |        |        |       | ESC    | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      |        |       |        |        |        |
+//  * |--------+--------+--------+--------|       | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+//  * |        |        |        |        |       | TAB    | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      |        |       |        |        |        |
+//  * |--------+--------+--------+        |   o   | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       '--------+--------+--------'
+//  * |        |        |        |        |   o   | CAPS   | CAPS   | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |        |
+//  * |--------+--------+--------+--------|   o   | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---+--------|                .--------.
+//  * |        |        |        |        |       | LSHIFT | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | XXXXXX |        |                |        |
+//  * |--------+--------+--------+        |       | -------+ -------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+--------+--------|       .--------+--------+--------.
+//  * |                 |        |        |       | LCTRL  | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  |        |       |        |        |        |
+//  * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+//  */
+
+
+// /* QWERTY
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      | DEL    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAPS   | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      | XXXXXX . ENTER  | PG UP  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | XXXXXX . RSHIFT | UP     | PG DN  |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  | LEFT   | DOWN   | RIGHT  |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_QWERTY]       = { // QWERTY
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+//   { KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+//  },
+
+//  /* COLEMAK
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | TAB    | Q      | W      | F      | P      | G      | J      | L      | U      | Y      | ;      | [      | ]      | \      | DEL    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | BACKSP | A      | R      | S      | T      | D      | H      | N      | E      | I      | O      | '      | XXXXXX . ENTER  | PG UP  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * | LSHIFT | Z      | X      | C      | V      | B      | K      | M      | ,      | .      | /      | XXXXXX . RSHIFT | UP     | PG DN  |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  | LEFT   | DOWN   | RIGHT  |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_COLEMAK]      = { // COLEMAK
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+//   { KC_BSPC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+// },
+
+// /* DVORAK
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | [      | ]      | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | TAB    | '      | ,      | .      | P      | Y      | F      | G      | C      | R      | L      | /      | =      | \      | DEL    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAPS   | A      | O      | E      | U      | I      | D      | H      | T      | N      | S      | -      | XXXXXX . ENTER  | PG UP  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * | LSHIFT | ;      | Q      | J      | K      | X      | B      | M      | W      | V      | Z      | XXXXXX . RSHIFT | UP     | PG DN  |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  | LEFT   | DOWN   | RIGHT  |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_DVORAK]       = { // DVORAK
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS, KC_DEL   },
+//   { KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+//  },
+
+// /* UPPER
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | PRINT  | BR TOG | BR SP+ | BR SP- | BR RST | XXXXXX | XXXXXX | NUM LK | /      | *      |        | NUM LK | SCR LK | XXXXXX . PAUSE  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * |        | F1     | F2     | F3     | F4     |        |        | 7      | 8      | 9      | -      |        |        |        | INS    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAP LK | F5     | F6     | F7     | F8     |        |        | 4      | 5      | 6      | +      |        | XXXXXX .        | HOME   |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * |        | F9     | F10    | F11    | F12    |        |        | 1      | 2      | 3      | ENTER  | XXXXXX .        |        | END    |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * |        |        |        |        |        | 0               |        | RALT   | .      | ENTER  |        |        |        |        |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_UPPER]        = { // UPPER
+//   { KC_PSCR, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PAUS  },
+//   { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   XXXXXXX, XXXXXXX, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, _______, _______, KC_INS   },
+//   { KC_CAPS, KC_F5,   KC_F6,   KC_F7,   KC_F8,   XXXXXXX, XXXXXXX, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, ________________, KC_HOME  },
+//   { _______, KC_F9,   KC_F10,  KC_F11,  KC_F12,  XXXXXXX, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, ________________, _______, KC_END   },
+//   { _______, _______, _______, _______, _______, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, _______, _______, _______, _______  },
+//  },
+
+// /* LOWER
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * |        | $      | {      | [      | (      | %      | #      | )      | ]      | }      | @      |        |        |        | INS    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * |        | ^      | *      | +      | -      | /      | \      | _      | '      | "      | `      |        | XXXXXX .        | HOME   |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * |        | |      | &      | !      | ~      | ;      | :      | =      | <      | >      | ?      | XXXXXX .        |        | END    |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * |        |        |        |        |        |                 |        |        |        |        |        |        |        |        |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_LOWER]        = { // LOWER
+//   { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ________________  },
+//   { _______, KC_DLR,  KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT,   _______, _______, _______, KC_INS   },
+//   { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  _______, ________________, KC_HOME  },
+//   { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, ________________, _______, KC_END   },
+//   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______  },
+//  },
+
+// /* FUNCTION
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | NUM LK |        |        |        |        |        |        |        |        |        |        |        |        | XXXXXX .        |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | SCR LK | F13    | F14    | F15    | F16    |        |        |        |        |        |        |        |        |        |        |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAP LK | F17    | F18    | F19    | F20    |        |        |        |        |        |        |        | XXXXXX .        |        |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * |        | F21    | F22    | F23    | F24    |        |        |        |        |        |        | XXXXXX .        | VOL UP | MUTE   |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * |        |        |        |        |        | PLAY/PAUSE      |        |        |        |        |        | PTRACK | VOL DN | NTRACK |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_FUNCTION]     = { // FUNCTION
+//   { KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX  },
+//   { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  },
+//   { KC_CAPS, KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, XXXXXXX  },
+//   { _______, KC_F21,  KC_F22,  KC_F23,  KC_F24,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_VOLU, KC_MUTE  },
+//   { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT  },
+//  },
+
+// #ifdef MOUSEKEY_ENABLE
+
+//  [LAYER_MOUSE]        = { // MOUSE
+//   { _______, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX  },
+//   { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  },
+//   { XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, KC_WH_U  },
+//   { _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_MS_U, KC_WH_D  },
+//   { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
+//  },
+
+// #endif
+
+//  [LAYER_ADJUST]       = { // ADJUST
+//   { _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, _______, _______, _______, MU_TOG,  AU_TOG,  ________________  },
+//   { _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______  },
+//   { _______, _______, _______, _______, M_BACKL, RESET,   _______, M_MOUSE, _______, _______, _______, ________________, MUV_IN,  _______  },
+//   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, MUV_DE,  _______  },
+//  },
+
+
+// /*
+//  [LAYER_EMPTY]        = { // LAYER
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______, _______  },
+//   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______  },
+//  },
+// */
 
-*/
 };
 
-const uint16_t PROGMEM fn_actions[] = {
+#ifdef AUDIO_ENABLE
+
+float tone_my_startup[][2] = SONG(ODE_TO_JOY);
+float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY);
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
 
+float tone_audio_on[][2]   = SONG(CLOSE_ENCOUNTERS_5_NOTE);
+float tone_music_on[][2]   = SONG(DOE_A_DEER);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_caps_on[][2]    = SONG(CAPS_LOCK_ON_SOUND);
+float tone_caps_off[][2]   = SONG(CAPS_LOCK_OFF_SOUND);
+float tone_numlk_on[][2]   = SONG(NUM_LOCK_ON_SOUND);
+float tone_numlk_off[][2]  = SONG(NUM_LOCK_OFF_SOUND);
+float tone_scroll_on[][2]  = SONG(SCROLL_LOCK_ON_SOUND);
+float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND);
+
+#endif /* AUDIO_ENABLE */
+
+void persistant_default_layer_set(uint16_t default_layer)
+{
+    eeconfig_update_default_layer(default_layer);
+    default_layer_set(default_layer);
+}
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_MODS_ONESHOT(MOD_LSFT),
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
+
+    // MACRODOWN only works in this function
+    switch(id)
+    {
+
+        // case MACRO_BREATH_TOGGLE:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_toggle();
+        //     }
+        //     break;
+
+        // case MACRO_BREATH_SPEED_INC:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_speed_inc(1);
+        //     }
+        //     break;
+
+        // case MACRO_BREATH_SPEED_DEC:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_speed_dec(1);
+        //     }
+        //     break;
+
+        // case MACRO_BREATH_DEFAULT:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_defaults();
+        //     }
+        //     break;
+
+        case MACRO_QWERTY:
+            if (record->event.pressed)
+            {
+                persistant_default_layer_set(1UL<<LAYER_QWERTY);
+                #ifdef AUDIO_ENABLE
+                    PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO);
+                #endif /* AUDIO_ENABLE */
+            }
+            break;
+
+        case MACRO_COLEMAK:
+            if (record->event.pressed)
+            {
+                persistant_default_layer_set(1UL<<LAYER_COLEMAK);
+                #ifdef AUDIO_ENABLE
+                    PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO);
+                #endif /* AUDIO_ENABLE */
+            }
+            break;
+
+        case MACRO_DVORAK:
+            if (record->event.pressed)
+            {
+                persistant_default_layer_set(1UL<<LAYER_DVORAK);
+                #ifdef AUDIO_ENABLE
+                    PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO);
+                #endif /* AUDIO_ENABLE */
+            }
+            break;
+
+        case MACRO_UPPER:
+            if (record->event.pressed)
+            {
+                layer_on(LAYER_UPPER);
+                // breathing_speed_set(2);
+                // breathing_pulse();
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            else
+            {
+                layer_off(LAYER_UPPER);
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            break;
+
+        case MACRO_LOWER:
+            if (record->event.pressed)
+            {
+                layer_on(LAYER_LOWER);
+                // breathing_speed_set(2);
+                // breathing_pulse();
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            else
+            {
+                layer_off(LAYER_LOWER);
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            break;
+
+        case MACRO_FUNCTION:
+            if (record->event.pressed)
+            {
+                // breathing_speed_set(3);
+                // breathing_enable();
+                layer_on(LAYER_FUNCTION);
+            }
+            else
+            {
+                // breathing_speed_set(1);
+                // breathing_self_disable();
+                layer_off(LAYER_FUNCTION);
+            }
+            break;
+
+#ifdef MOUSEKEY_ENABLE
+
+        case MACRO_MOUSE:
+            if (record->event.pressed)
+            {
+                layer_invert(LAYER_MOUSE);
+            }
+            break;
+
+#endif /* MOUSEKEY_ENABLE */
+
+#ifdef AUDIO_ENABLE
+
+        case MACRO_TIMBRE_1:
+            if (record->event.pressed) set_timbre(TIMBRE_12);
+            break;
+
+        case MACRO_TIMBRE_2:
+            if (record->event.pressed) set_timbre(TIMBRE_25);
+            break;
+
+        case MACRO_TIMBRE_3:
+            if (record->event.pressed) set_timbre(TIMBRE_50);
+            break;
+
+        case MACRO_TIMBRE_4:
+            if (record->event.pressed) set_timbre(TIMBRE_75);
+            break;
+
+        case MACRO_TEMPO_U:
+            if (record->event.pressed) increase_tempo(10);
+            break;
+
+        case MACRO_TEMPO_D:
+            if (record->event.pressed) decrease_tempo(10);
+            break;
+
+        case MACRO_TONE_DEFAULT:
+            if (record->event.pressed)
+            {
+                set_timbre(TIMBRE_DEFAULT);
+                set_tempo(TEMPO_DEFAULT);
+            }
+            break;
+
+/*
+        case MACRO_AUDIO_TOGGLE:
+            if (record->event.pressed)
+            {
+                    if (is_audio_on())
+                    {
+                        audio_off();
+                    }
+                    else
+                    {
+                        audio_on();
+                        PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO);
+                    }
+            }
+            break;
+
+        case MACRO_MUSIC_TOGGLE:
+            if (record->event.pressed)
+            {
+                    if (IS_LAYER_ON(LAYER_MUSIC))
+                    {
+                        layer_off(LAYER_MUSIC);
+                        stop_all_notes();
+                    }
+                    else
+                    {
+                    PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO);
+                    layer_on(LAYER_MUSIC);
+                    }
+            }
+            break;
+        case MACRO_INC_VOICE:
+            if (record->event.pressed)
+            {
+                #ifdef AUDIO_ENABLE
+                    voice_iterate();
+                    PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+                #endif
+            }
+            break;
+
+        case MACRO_DEC_VOICE:
+            if (record->event.pressed)
+            {
+                #ifdef AUDIO_ENABLE
+                    voice_deiterate();
+                    PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+                #endif
+            }
+            break;
+*/
+
+#endif /* AUDIO_ENABLE */
+
+#ifdef BACKLIGHT_ENABLE
+        case MACRO_BACKLIGHT:
+            if (record->event.pressed)
+            {
+                backlight_step();
+            }
+#endif
+
+        default:
+            break;
+
+    }
     return MACRO_NONE;
 };
 
 
-void matrix_init_user(void) {
+#ifdef AUDIO_ENABLE
+
+void matrix_init_user(void)
+{
+    set_voice(default_voice);
+    startup_user();
+    println("Matrix Init");
+}
+
+void led_set_user(uint8_t usb_led)
+{
+    static uint8_t old_usb_led = 0;
+
+    _delay_ms(10); // gets rid of tick
+
+    if (!is_playing_notes())
+    {
+        if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK)))
+        {
+                // If CAPS LK LED is turning on...
+                PLAY_NOTE_ARRAY(tone_caps_on,  false, LEGATO);
+        }
+        else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK)))
+        {
+                // If CAPS LK LED is turning off...
+                PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO);
+        }
+        else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK)))
+        {
+                // If NUM LK LED is turning on...
+                PLAY_NOTE_ARRAY(tone_numlk_on,  false, LEGATO);
+        }
+        else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK)))
+        {
+                // If NUM LED is turning off...
+                PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO);
+        }
+        else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
+        {
+                // If SCROLL LK LED is turning on...
+                PLAY_NOTE_ARRAY(tone_scroll_on,  false, LEGATO);
+        }
+        else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
+        {
+                // If SCROLL LED is turning off...
+                PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO);
+        }
+    }
 
+    old_usb_led = usb_led;
 }
 
-void matrix_scan_user(void) {
 
+void startup_user()
+{
+    _delay_ms(10); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_my_startup, false, STACCATO);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_my_goodbye, false, STACCATO);
+    _delay_ms(2000);
+    stop_all_notes();
 }
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
+void audio_on_user(void)
+{
+  PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO);
 }
 
-void led_set_user(uint8_t usb_led) {
+void music_on_user(void)
+{
+  PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO);
+}
+
+void music_scale_user(void)
+{
+  PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+}
 
-}
\ No newline at end of file
+#endif /* AUDIO_ENABLE */
\ No newline at end of file
-- 
cgit v1.2.3


From 235d47e747465000dc2725acff4796a933c2fcea Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Wed, 24 Aug 2016 12:57:32 +0200
Subject: - Updated readme by adding link on kle for each layer

---
 keyboards/planck/keymaps/dbroqua/readme.md | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/dbroqua/readme.md b/keyboards/planck/keymaps/dbroqua/readme.md
index b5cdb9f65d..777c76abd4 100644
--- a/keyboards/planck/keymaps/dbroqua/readme.md
+++ b/keyboards/planck/keymaps/dbroqua/readme.md
@@ -3,6 +3,9 @@
 ![Layout](layout.png "Dbroqua Keymap")
 
 * Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/e77306f9d14cc93fa26123b93b106474
+* Online keyboard layout editor (lower layer): http://www.keyboard-layout-editor.com/#/gists/786e03f6fbd274cb4f4e77a3d67f85fa
+* Online keyboard layout editor (raise layer): http://www.keyboard-layout-editor.com/#/gists/2e22c71f6910103c20d595d1caa713d6
+* Online keyboard layout editor (multimedia layer): http://www.keyboard-layout-editor.com/#/gists/132ebf8053508a7a81dfa8e0756edb40
 
 # Programming Instructions:
 Enter into programming mode and run the following command.
-- 
cgit v1.2.3


From 7debe7cd777f50ef0adf4d3b4623946232f1eccf Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Wed, 24 Aug 2016 09:26:41 -0600
Subject: Changes based on @fredizzimo review, flashing Infinity details

---
 keyboards/ergodox/readme.md | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index 304f2b01f2..4730de36f6 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -1,3 +1,15 @@
+# The Easy Way
+
+If you can find firmware someone else has made that does what you want, that
+is the easiest way to customize your ErgoDox.  It requires no programming
+experience or the setup of a build environment.
+
+Quickstart:
+
+  - Find and download an [existing firmware](#other-firmware-options)
+
+  - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez)
+    or [ErgoDox Infinity](#ergodox-infinity)
 
 # Customizing Keymaps
 
@@ -98,6 +110,28 @@ for the left and right halves seperately.  To flash them:
 More information on the Infinity firmware is available in the [TMK/chibios for
 Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md)
 
+### Infinity Master/Two Halves
+
+The Infinity is two completely independent keyboards, that can connect together.
+You have a few options in how you flash the firmware:
+
+- Flash the left half, rebuild the firmware with "MASTER=right" and then flash
+  the right half.  This allows you to plug in either half directly to the
+  computer and is what the above instructions do.
+
+- Flash the left half, then flash the same firmware on the right.  This only
+  works when the left half is plugged directly to the computer and the keymap
+  is mirrored.  It saves the small extra step of rebuilding with
+  "MASTER=right".
+
+- The same as the previous one but with "MASTER=right" when you build the
+  firmware, then flash the same firmware to both halves.  You just have to
+  directly connect the right half to the computer.
+
+- For minor changes such as changing only the keymap without having updated
+  any part of the firmware code itself, you can program only the MASTER half.
+  It is safest to program both halves though.
+
 # Contributing your keymap
 
 The QMK firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed dozens of user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format.
-- 
cgit v1.2.3


From 0dfd1712bb22be9fe63b8754eb8fe72675906c6f Mon Sep 17 00:00:00 2001
From: Sean Reifschneider <sean@realgo.com>
Date: Wed, 24 Aug 2016 09:30:29 -0600
Subject: Making the existing firmware link better

---
 keyboards/ergodox/readme.md | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md
index 4730de36f6..b113ca7dd2 100644
--- a/keyboards/ergodox/readme.md
+++ b/keyboards/ergodox/readme.md
@@ -6,7 +6,8 @@ experience or the setup of a build environment.
 
 Quickstart:
 
-  - Find and download an [existing firmware](#other-firmware-options)
+  - Find and download an existing firmware
+    [from Other Firmware Options](#other-firmware-options)
 
   - Then flash the firmware to your [ErgoDox Ez](#ergodox-ez)
     or [ErgoDox Infinity](#ergodox-infinity)
-- 
cgit v1.2.3


From 5979051de339d0b064aaaeb59948df00aa7c3951 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Wed, 24 Aug 2016 21:53:49 +0200
Subject: - Updated kc60.h for 2x 1u backspace (K49) - Added dbroqua layout

---
 keyboards/kc60/kc60.h                    |   8 ++-
 keyboards/kc60/keymaps/dbroqua/keymap.c  | 103 +++++++++++++++++++++++++++++++
 keyboards/kc60/keymaps/dbroqua/readme.md |  11 ++++
 3 files changed, 119 insertions(+), 3 deletions(-)
 create mode 100644 keyboards/kc60/keymaps/dbroqua/keymap.c
 create mode 100644 keyboards/kc60/keymaps/dbroqua/readme.md

(limited to 'keyboards')

diff --git a/keyboards/kc60/kc60.h b/keyboards/kc60/kc60.h
index 34eab4b2a0..f11d3435c9 100644
--- a/keyboards/kc60/kc60.h
+++ b/keyboards/kc60/kc60.h
@@ -3,6 +3,8 @@
 
 #include "quantum.h"
 
+// K49 key is for the key at row 1 and column 15 when you split the backspace in 2 1U key.
+
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a multi-dimensional array
@@ -11,13 +13,13 @@
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
     ) { \
-  {  K00,  K01,  K02,  K03,    K04,    K05,  K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D  },  \
+  {  K00,  K01,  K02,  K03,    K04,    K05,  K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D,  },  \
   {  K10,  K11,  K12,  K13,    K14,    K15,  K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,  K1D  },  \
   {  K20,  K21,  K22,  K23,    K24,    K25,  K26,    K27,    K28,    K29,  K2A,  K2B,  K2C,  K2D  },  \
   {  K30,  K31,  K32,  K33,    K34,    K35,  K36,    K37,    K38,    K39,  K3A,  K3B,  K3C,  K3D  },  \
-  {  K40,  K41,  K42,  KC_NO,  KC_NO,  K45,  KC_NO,  KC_NO,  KC_NO,  KC_NO,K4A,  K4B,  K4C,  K4D  }   \
+  {  K40,  K41,  K42,  KC_NO,  KC_NO,  K45,  KC_NO,  KC_NO,  KC_NO,  K49,  K4A,  K4B,  K4C,  K4D  }   \
 }
 
 #endif
diff --git a/keyboards/kc60/keymaps/dbroqua/keymap.c b/keyboards/kc60/keymaps/dbroqua/keymap.c
new file mode 100644
index 0000000000..e17827fad9
--- /dev/null
+++ b/keyboards/kc60/keymaps/dbroqua/keymap.c
@@ -0,0 +1,103 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "kc60.h"
+
+#define _QWERTY 0
+#define _FNCAPS 1
+#define _FNRIGHTSHIFT 2
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Func macro definitions.
+#define S_LED   FUNC(0)
+#define S_LEDI  FUNC(1)
+#define S_LEDD  FUNC(2)
+
+// Enable these functions using FUNC(n) macro.
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_BACKLIGHT_TOGGLE(),
+	[1] = ACTION_BACKLIGHT_INCREASE(),
+	[2] = ACTION_BACKLIGHT_DECREASE()
+ };
+
+/*
+ * |     |     |
+ * |       |   |
+ * |        |  |
+ * |         | |
+ * |           |
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  `  | Bksp|
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Caps/FN1|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |     Up    | FN2 |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl  | Gui   | Alt   |               Space             | AltGr | Left  | Down  | Right |
+ * `-----------------------------------------------------------------------------------------'
+ */
+  [0] = KEYMAP( /* Basic QWERTY */
+      KC_ESC,   KC_1,     KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  \
+      KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  \
+      LT(_FNCAPS, KC_CAPS),  KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
+      KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_N,    KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  MO(_FNRIGHTSHIFT),  KC_UP,  \
+      KC_LCTL,  KC_LGUI,  KC_LALT,  KC_SPC,  KC_BSPC,  KC_RALT,  KC_LEFT, KC_DOWN, KC_RIGHT \
+      ),
+
+/* Layer 1
+ * ,-----------------------------------------------------------------------------------------.
+ * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |        |     |     |     |     |     |     |     |     |     |     |     |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         |     |     |     |     |     |     | Psc |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Led | Led-| Led+|     | Mute| Vol+| Vol-|     |     |     |    Play   |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |       |       |       |                                 |       | Prev  | Stop  | Next  |
+ * `-----------------------------------------------------------------------------------------'
+ */
+  [_FNCAPS] = KEYMAP( /* Layer 1 */
+      ______,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS,  \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, ______, ______, ______, ______, ______, KC_PSCR,______, ______, ______, ______, ______, ______,   \
+      ______,   ______,  S_LED,  S_LEDI, S_LEDD,______,KC_MUTE,KC_VOLU,KC_VOLD,______, ______, ______, ______,KC_MPLY,  \
+      ______,   ______, ______,                 ______,         KC_DEL,         ______, KC_MPRV,    KC_MSTP,    KC_MNXT \
+      ),
+
+/* Layer 2
+ * ,-----------------------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |        |     |     |     |     |     |     |     |     |     |     |     |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         |     |     |     |     |     |     |     |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           |     |     |     |     |     |     |     |     |     |     |   PgUp    |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |       |       |       |                                 |       | Home  | PgDown| End   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+  [_FNRIGHTSHIFT] = KEYMAP( /* Layer 2 */
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,   \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PGUP,  \
+      ______,   ______, ______,                 ______,         ______,                 ______, KC_HOME,KC_PGDN,KC_END \
+      ),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+  return MACRO_NONE;
+};
diff --git a/keyboards/kc60/keymaps/dbroqua/readme.md b/keyboards/kc60/keymaps/dbroqua/readme.md
new file mode 100644
index 0000000000..b71d10ab04
--- /dev/null
+++ b/keyboards/kc60/keymaps/dbroqua/readme.md
@@ -0,0 +1,11 @@
+# Dbroqua Layout
+
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/24fa7821d4955ec3c76037c8e159a199
+* Online keyboard layout editor (caps layer): http://www.keyboard-layout-editor.com/#/gists/4136d4d1555d6f0d9403c21aaf50fd37
+* Online keyboard layout editor (fn2 layer): http://www.keyboard-layout-editor.com/#/gists/cf4955f73f339020dbb41c15364e7e4f
+
+# Programming Instructions:
+Enter into programming mode and run the following command.
+```
+$ sudo KEYMAP=dbroqua make dfu
+```
\ No newline at end of file
-- 
cgit v1.2.3


From e6dcb8de8ce1a051b3c34c3e61fac4f2d6af8773 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Wed, 24 Aug 2016 22:22:14 +0200
Subject: - Fixed layout for kc60

---
 keyboards/kc60/keymaps/default/keymap.c      |  2 +-
 keyboards/kc60/keymaps/sgoodwin/keymap.c     |  6 +++---
 keyboards/kc60/keymaps/stanleylai/keymap.c   |  8 ++++----
 keyboards/kc60/keymaps/wigguno/keymap.c      |  4 ++--
 keyboards/kc60/keymaps/workman-dead/keymap.c | 10 +++++-----
 keyboards/kc60/keymaps/ws2812/keymap.c       |  6 +++---
 6 files changed, 18 insertions(+), 18 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/kc60/keymaps/default/keymap.c b/keyboards/kc60/keymaps/default/keymap.c
index 6f8352c695..293ff3ab46 100644
--- a/keyboards/kc60/keymaps/default/keymap.c
+++ b/keyboards/kc60/keymaps/default/keymap.c
@@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  \
       KC_CAPS,  KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_N,    KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,  \
-      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                                       KC_RGUI,  KC_RALT,  KC_RCTL,  RESET \
+      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                             KC_NO,    KC_RGUI,  KC_RALT,  KC_RCTL,  RESET \
       ),
 };
 
diff --git a/keyboards/kc60/keymaps/sgoodwin/keymap.c b/keyboards/kc60/keymaps/sgoodwin/keymap.c
index 99e95c2326..3192b25142 100644
--- a/keyboards/kc60/keymaps/sgoodwin/keymap.c
+++ b/keyboards/kc60/keymaps/sgoodwin/keymap.c
@@ -13,21 +13,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB,   KC_Q,     KC_W,     KC_F,    KC_P,     KC_G,     KC_J,     KC_L,  KC_U,  KC_Y,     KC_SCLN,  KC_LBRC,  KC_RBRC,  KC_BSLS,  \
       MO(2),    KC_A,     KC_R,     KC_S,    KC_T,     KC_D,     KC_H,     KC_N,  KC_E,  KC_I,     KC_O,     KC_QUOT,  KC_NO,    KC_ENT,   \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_K,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,  \
-      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                                     KC_RGUI,  KC_RALT,  KC_RCTL,  DF(1)  \
+      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                           KC_NO,    KC_RGUI,  KC_RALT,  KC_RCTL,  DF(1)  \
       ),
   [1] = KEYMAP( /* Basic QWERTY */
       KC_ESC,   KC_1,     KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  \
       KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  \
       MO(2),    KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_N,    KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,  \
-      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                                       KC_RGUI,  KC_RALT,  KC_RCTL,  DF(0) \
+      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                             KC_NO,    KC_RGUI,  KC_RALT,  KC_RCTL,  DF(0) \
       ),
   [2] = KEYMAP( /* KBP v60-like arrows, media keys, etc */
       KC_GRV,   KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,  KC_DEL,   \
       KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_UP,    BL_INC,    BL_DEC,  BL_STEP,  \
       KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  KC_NO,   KC_TRNS,  \
       KC_TRNS,  KC_NO,    KC_MPRV,  KC_MPLY,   KC_MNXT,  KC_VOLD,  KC_VOLU,  KC_MUTE,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_NO,   KC_TRNS,  \
-      KC_TRNS,  KC_TRNS,  KC_TRNS,                       KC_SPC,                                           DEBUG,    RESET,     KC_TRNS, KC_NO     \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,                       KC_SPC,                                 KC_NO,    DEBUG,    RESET,     KC_TRNS, KC_NO     \
       ),
 };
 
diff --git a/keyboards/kc60/keymaps/stanleylai/keymap.c b/keyboards/kc60/keymaps/stanleylai/keymap.c
index 057c73bf4d..212fa88bd0 100644
--- a/keyboards/kc60/keymaps/stanleylai/keymap.c
+++ b/keyboards/kc60/keymaps/stanleylai/keymap.c
@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,           KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,  KC_RBRC,  KC_BSLS, \
   LT(_FL, KC_CAPS), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,  KC_NO,    KC_ENT,  \
   KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  MO(_FL),  KC_UP,   \
-  KC_LCTL, KC_LALT, KC_LGUI,                KC_SPC,                                 KC_RGUI,KC_LEFT,  KC_DOWN,  KC_RGHT),
+  KC_LCTL, KC_LALT, KC_LGUI,                KC_SPC,                         KC_NO,  KC_RGUI,KC_LEFT,  KC_DOWN,  KC_RGHT),
 
 // Function layer
 [_FL] = KEYMAP(
@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_NO,  KC_MPRV,KC_UP,  KC_MNXT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_PSCR,KC_SLCK,  KC_PAUS,  KC_INS, \
   KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO,  \
   KC_TRNS,KC_NO,  KC_MUTE,KC_VOLD,KC_VOLU,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_TRNS,  LT(_RGBL, KC_PGUP),\
-  KC_TRNS,KC_TRNS,KC_TRNS,                KC_MPLY,                                KC_TRNS,KC_HOME,  KC_PGDN,  KC_END),
+  KC_TRNS,KC_TRNS,KC_TRNS,                KC_MPLY,                        KC_NO,  KC_TRNS,KC_HOME,  KC_PGDN,  KC_END),
 
 // RGB Layer
 [_RGBL] = KEYMAP(
@@ -39,13 +39,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO,  \
   KC_TRNS,KC_NO,  RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,BL_STEP,BL_TOGG,  KC_TRNS,  KC_TRNS,\
-  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                                KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
+  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_NO,  KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
   #else
   RESET,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO,  \
   KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  BL_STEP,BL_TOGG,  KC_TRNS,  KC_TRNS,\
-  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                                KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
+  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_NO,  KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
   #endif
 };
 
diff --git a/keyboards/kc60/keymaps/wigguno/keymap.c b/keyboards/kc60/keymaps/wigguno/keymap.c
index 50b1d0f981..dca2826eb1 100644
--- a/keyboards/kc60/keymaps/wigguno/keymap.c
+++ b/keyboards/kc60/keymaps/wigguno/keymap.c
@@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,   \
       KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,    \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,   \
-      KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,                                           KC_RALT,  MO(1),    KC_RGUI,  KC_RCTL    \
+      KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,                                 KC_NO,    KC_RALT,  MO(1),    KC_RGUI,  KC_RCTL    \
       ),
 	  	
    /*
@@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR,  KC_TRNS,  KC_TRNS,  KC_TRNS,   \
       KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  BL_DEC,   BL_INC,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   \
       KC_TRNS,  KC_TRNS,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_HOME,  KC_END,   KC_TRNS,  KC_TRNS,  KC_TRNS,   \
-      RESET,    KC_TRNS,  KC_TRNS,                      BL_TOGG,                                          KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS    \
+      RESET,    KC_TRNS,  KC_TRNS,                      BL_TOGG,                                KC_NO,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS    \
       ),
 };
 
diff --git a/keyboards/kc60/keymaps/workman-dead/keymap.c b/keyboards/kc60/keymaps/workman-dead/keymap.c
index 103adeef61..9786e37d8c 100644
--- a/keyboards/kc60/keymaps/workman-dead/keymap.c
+++ b/keyboards/kc60/keymaps/workman-dead/keymap.c
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TABM,          KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \
   KC_LCTL,          KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    KC_QUOT, _______, KC_ENT,  \
   KC_LSFT, _______, KC_Z,    KC_X,    KC_M,    KC_C,    KC_V,    KC_K,    KC_L,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,                   KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW),
 
 // QWERTY
 /*
@@ -77,7 +77,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TABM,          KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
   KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, _______, KC_ENT,  \
   KC_LSFT, _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,                   KC_RALT, KC_RGUI, KC_RCTL, KC_DOWN),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, KC_DOWN),
 
 // dead key layer
 /*
@@ -98,7 +98,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   XXXXXXX,          KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT,   KC_DLR,  KC_UNDS, KC_LBRC, KC_RBRC, KC_EXLM, KC_TILD, KC_CIRC, _______, \
   _______,          KC_HASH, KC_LPRN, KC_EQL,  KC_0,    KC_LCBR, KC_RCBR, KC_1,    KC_ASTR, KC_RPRN, KC_MINS, KC_GRV,  _______, KC_CENT, \
   _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_PIPE, KC_BSLS, KC_2,    DK_REL,  KC_4,    KC_5,             _______, _______, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_COMS,                   KC_RALT, KC_RGUI, KC_RCTL, _______),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_COMS,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, _______),
 
 // function layer
 /*
@@ -119,7 +119,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_ESC,           KC_CMDQ, KC_CMDD, KC_CSTB, KC_C_TB, _______, _______, KC_PGDN, KC_UP,   KC_PGUP, _______, _______, _______, KC_INS,  \
   KC_LSFT,          KC_CMDA, KC_CMDS, KC_C_LF, KC_C_RT, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_END,  _______, KC_BSPC, \
   KC_LSFT, _______, KC_CMDZ, KC_CMDX, _______, KC_CMDC, KC_CMDV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______,          _______, _______, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_TRNS,                   KC_RALT, KC_RGUI, KC_RCTL, RESET),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_TRNS,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, RESET),
 
 // mouse layer
 /*
@@ -140,7 +140,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   XXXXXXX,          KC_ACL2, KC_ACL1, KC_ACL0, _______, _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, \
   _______,          _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN2, _______, _______, _______, \
   _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-  _______, _______, _______,                   KC_BTN1,                   _______, _______, _______, _______),
+  _______, _______, _______,                   KC_BTN1,          _______, _______, _______, _______, _______),
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
diff --git a/keyboards/kc60/keymaps/ws2812/keymap.c b/keyboards/kc60/keymaps/ws2812/keymap.c
index 1c0574df09..ae11ebf91c 100644
--- a/keyboards/kc60/keymaps/ws2812/keymap.c
+++ b/keyboards/kc60/keymaps/ws2812/keymap.c
@@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,  KC_RBRC, KC_BSLS, \
   KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,  KC_NO,   KC_ENT,  \
   KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_NO,   KC_RSFT, \
-  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, MO(_FL), KC_RCTL),
+  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                         KC_NO,  KC_RALT,KC_RGUI, MO(_FL), KC_RCTL),
 
   /* Keymap _FL: Function Layer
    * ,-----------------------------------------------------------.
@@ -53,13 +53,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_INC,  BL_TOGG, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, RESET),
+  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, RESET),
   #else
   KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
   KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_INC,  BL_TOGG, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, RESET),
+  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, RESET),
   #endif
 };
 
-- 
cgit v1.2.3


From a72d46d1ecf7c317830aca91aadc3fae01f00bca Mon Sep 17 00:00:00 2001
From: Joshua T <joshua@sonofone.net>
Date: Wed, 24 Aug 2016 23:58:59 -0500
Subject: Added replicaJunction keymap

---
 .../atreus-replica-base-colemakdh.png              | Bin 0 -> 76319 bytes
 .../replicaJunction/atreus-replica-extend.png      | Bin 0 -> 91555 bytes
 .../replicaJunction/atreus-replica-function.png    | Bin 0 -> 92516 bytes
 .../replicaJunction/atreus-replica-game.png        | Bin 0 -> 72509 bytes
 .../keymaps/replicaJunction/atreus-replica-num.png | Bin 0 -> 73171 bytes
 keyboards/atreus/keymaps/replicaJunction/config.h  |  94 ++++++++++++++++++
 keyboards/atreus/keymaps/replicaJunction/keymap.c  | 107 +++++++++++++++++++++
 keyboards/atreus/keymaps/replicaJunction/readme.md |  57 +++++++++++
 8 files changed, 258 insertions(+)
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/atreus-replica-base-colemakdh.png
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/atreus-replica-extend.png
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/atreus-replica-function.png
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/atreus-replica-game.png
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/atreus-replica-num.png
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/config.h
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/keymap.c
 create mode 100644 keyboards/atreus/keymaps/replicaJunction/readme.md

(limited to 'keyboards')

diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-base-colemakdh.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-base-colemakdh.png
new file mode 100644
index 0000000000..4640f9f529
Binary files /dev/null and b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-base-colemakdh.png differ
diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-extend.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-extend.png
new file mode 100644
index 0000000000..08c2e6140c
Binary files /dev/null and b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-extend.png differ
diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-function.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-function.png
new file mode 100644
index 0000000000..34ad03decd
Binary files /dev/null and b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-function.png differ
diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-game.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-game.png
new file mode 100644
index 0000000000..14ae35b54e
Binary files /dev/null and b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-game.png differ
diff --git a/keyboards/atreus/keymaps/replicaJunction/atreus-replica-num.png b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-num.png
new file mode 100644
index 0000000000..6598acb27b
Binary files /dev/null and b/keyboards/atreus/keymaps/replicaJunction/atreus-replica-num.png differ
diff --git a/keyboards/atreus/keymaps/replicaJunction/config.h b/keyboards/atreus/keymaps/replicaJunction/config.h
new file mode 100644
index 0000000000..437aa662c8
--- /dev/null
+++ b/keyboards/atreus/keymaps/replicaJunction/config.h
@@ -0,0 +1,94 @@
+/*
+Config file - Atreus QMK with replicaJunction layout
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Technomancy
+#define PRODUCT         Atreus
+#define DESCRIPTION     q.m.k. keyboard firmware for Atreus
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+// Change this to how you wired your keyboard
+// COLS: Left to right, ROWS: Top to bottom
+#if defined(ATREUS_ASTAR)
+#   define MATRIX_ROW_PINS { D0, D1, D3, D2 }
+#   define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
+#   define UNUSED_PINS
+#elif defined(ATREUS_TEENSY2)
+#   define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#   define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 }
+#   define UNUSED_PINS
+#endif
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+// Default: 5
+#define DEBOUNCING_DELAY 6
+
+// I don't have any locking keys, so I don't need these features
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Prevent modifiers from sticking when switching layers */
+#define PREVENT_STUCK_MODIFIERS
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/atreus/keymaps/replicaJunction/keymap.c b/keyboards/atreus/keymaps/replicaJunction/keymap.c
new file mode 100644
index 0000000000..52d3677fa7
--- /dev/null
+++ b/keyboards/atreus/keymaps/replicaJunction/keymap.c
@@ -0,0 +1,107 @@
+/*
+ * Keyboard: Atreus
+ * Keymap:   replicaJunction
+ * Version:  0.3
+ *
+ * This keymap is designed to complement my Ergodox keyboard layout, found in keyboards/ergodox_ez.
+ * The Atreus keyboard is a 40% board whose design was heavily influenced by the Ergodox. I now
+ * have both keyboards, so I've designed these layouts in an effort to make switching between the
+ * two as easy as possible.
+ *
+ * Clearly, the Atreus is the limiting factor in this equation, so I've taken heavy advantage of
+ * function and dual-role keys.
+ *
+ * The default key layout in this keymap is Colemak-ModDH. Information on that layout can be found
+ * here: https://colemakmods.github.io/mod-dh/
+ */
+
+#include "atreus.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+// Note that whatever is set as layer 0 will be the default layer of the keyboard.
+
+#define _CO 0 // Colemak
+#define _QW 1 // QWERTY
+#define _GA 2 // Gaming
+#define _EX 3 // Extend
+#define _NU 4 // Numpad
+#define _FN 5 // Function
+
+// Some quick aliases, just to make it look pretty
+#define _______ KC_TRNS
+#define KCX_CA  LCTL(KC_LALT)
+#define KCX_CS  LCTL(KC_LSFT)
+#define KCX_CSA LCTL(LSFT(KC_LALT))
+#define KCX_LST LSFT(KC_TAB)
+#define KX_COPY LCTL(KC_C)
+#define KX_CUT  LCTL(KC_X)
+#define KX_PAST LCTL(KC_V)
+#define KX_UNDO LCTL(KC_Z)
+
+; // This doesn't do anything. It's just for VSCode because its syntax highlighting is weird for the above #define statements.
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_CO] = KEYMAP(
+  KC_Q,        KC_W,    KC_F,    KC_P,    KC_B,                                   KC_J,            KC_L,    KC_U,    KC_Y,    KC_SCLN,
+  KC_A,        KC_R,    KC_S,    KC_T,    KC_G,                                   KC_M,            KC_N,    KC_E,    KC_I,    KC_O,
+  SFT_T(KC_Z), KC_X,    KC_C,    KC_D,    KC_V,                                   KC_K,            KC_H,    KC_COMM, KC_DOT,  SFT_T(KC_SLSH),
+  KC_ESC,      KC_LGUI, KC_TAB,  KC_LALT, KC_BSPC, CTL_T(KC_DEL), ALT_T(KC_ENT),  LT(_NU, KC_SPC), MO(_EX), KC_MINS, KC_QUOT, KC_EQL
+),
+
+[_QW] = KEYMAP( /* Qwerty */
+  KC_Q,        KC_W,    KC_E,    KC_R,    KC_T,                                  KC_Y,            KC_U,    KC_I,    KC_O,    KC_P,
+  KC_A,        KC_S,    KC_D,    KC_F,    KC_G,                                  KC_H,            KC_J,    KC_K,    KC_L,    KC_SCLN,
+  SFT_T(KC_Z), KC_X,    KC_C,    KC_V,    KC_B,                                  KC_N,            KC_M,    KC_COMM, KC_DOT,  SFT_T(KC_SLSH),
+  KC_ESC,      KC_LGUI, KC_TAB,  KC_LALT, KC_BSPC, CTL_T(KC_DEL), ALT_T(KC_ENT), LT(_NU, KC_SPC), MO(_EX), KC_MINS, KC_QUOT, KC_EQL
+),
+
+[_EX] = KEYMAP( /* Extend */
+  KC_CAPS, _______, _______, _______, _______,                   KC_PGUP, KC_HOME, KC_UP,   KC_END,  KC_DEL,
+  _______, KC_LGUI, KC_LALT, KC_LCTL, _______,                   KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC,
+  _______, KX_CUT,  KX_COPY, _______, KX_PAST,                   _______, KC_TAB,  KCX_LST, _______, KC_INSERT,
+  _______, _______, _______, _______, _______, _______, _______, KC_SPC,  _______, _______, _______, KC_PSCR
+),
+
+[_NU] = KEYMAP( /* Numbers and symbols */
+  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_AMPR,                    KC_SLSH, KC_7,    KC_8,   KC_9,   KC_ASTR,
+  KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_TILD,                    KC_PIPE, KC_4,    KC_5,   KC_6,   KC_MINS,
+  KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_GRV,                     KC_BSLS, KC_1,    KC_2,   KC_3,   KC_PLUS,
+  _______, TG(_GA), _______, MO(_FN), _______, _______,  _______, _______, KC_0,    KC_DOT, KC_EQL, _______
+),
+
+[_FN] = KEYMAP( /* Functions */
+  KC_DEL,  KC_HOME, KC_UP,   KC_END,  KC_PGUP,                   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,
+  KC_BSPC, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN,                   _______, KC_F4,   KC_F5,   KC_F6,   KC_F11,
+  _______, KC_VOLU, KC_MUTE, KC_VOLD, KC_MPLY,                   _______, KC_F1,   KC_F2,   KC_F3,   KC_F12,
+  _______, _______, _______, _______, KC_MSTP, _______, _______, _______, KC_NO,   DF(_CO), DF(_QW), RESET
+),
+
+[_GA] = KEYMAP( /* Gaming */
+  _______, _______, _______, _______, _______,                   _______, KC_WH_U, KC_MS_U, KC_WH_D, _______,
+  _______, _______, _______, _______, _______,                   _______, KC_MS_L, KC_MS_D, KC_MS_R, _______,
+  KC_Z,    _______, _______, _______, _______,                   KC_BTN3, _______, KC_MS_D, _______, _______,
+  _______, TG(_GA), _______, KC_LSFT, KC_SPC,  KC_BSPC, KC_BTN2, KC_BTN1, _______, _______, _______, _______
+)};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/atreus/keymaps/replicaJunction/readme.md b/keyboards/atreus/keymaps/replicaJunction/readme.md
new file mode 100644
index 0000000000..21af48e8fd
--- /dev/null
+++ b/keyboards/atreus/keymaps/replicaJunction/readme.md
@@ -0,0 +1,57 @@
+# replicaJunction - Atreus Layout #
+
+This layout is designed to make the absolute most out of the Atreus 40% keyboard.
+
+I was enchanted with the idea of the Atreus keyboard after using my Ergodox for several months. I wanted something of a similar form factor that was easily portable, so I could bring and transport a keyboard to my workplace without much hassle. After building the Atreus keyboard, though, I realized very quickly that the 40% form factor requires a lot more creativity than a full-size keyboard (even one as strangely-shaped as the Ergodox).
+
+The default Atreus keyboard layout provides all the necessary keys in order to function with the keyboard, but as a programmer, I needed quicker access to just about everything. I noticed that the default layer didn't include any dual-role keys, and so I started on my journey to build my perfect layout for the Atreus.
+
+I won't claim that this layout is perfect for everyone. It does make several significant changes from the "normal" Atreus layout. In my own use, though, I've found this keyboard turbocharges my Atreus, and gives it the power of a full-size keyboard without the size.
+
+## Base Layer ##
+
+![Atreus base layout](atreus-replica-base-colemakdh.png)
+
+The letters on this layout are arranged in the [Colemak Mod-DH layout](https://colemakmods.github.io/mod-dh/).
+
+Note that there are four dual-purpose keys: Shift (Backspace), Ctrl (Delete), Alt (Enter), and Space (Number layer). In QMK, these dual-role keys can be made to hold their primary key by double-tapping the key and holding on the second tap. For example, if I wanted to insert a long string of Spaces, I would tap the Space key, then tap it again and hold. A single press and hold would trigger the secondary function of the key instead.
+
+The secondary Alt on the left bottom row exists to provide a single-hand Alt+Tab shortcut, which would take two rows otherwise.
+
+## Extend Layer ##
+
+![Atreus extend layer](atreus-replica-extend.png)
+
+This layout is designed primarily for keyboard navigation. Arrow keys are easily accessible under the right hand (a welcome change from the original Atreus layout, which places them under the left hand), along with Home/End and PgUp/PgDn.
+
+Modifiers are also placed under the home row of the left hand. One of the single keyboard actions I use most is Shift+Ctrl+Left/Right to select a whole word; this layer makes those keypresses simple by adding the Ctrl key in an easy-to-reach location.
+
+For the common Ctrl shortcuts, I also added some hotkeys to this layer over the letter keys they are associated with. This gives the Extend key some extra utility by letting it "feel" like a Ctrl key in some cases.
+
+The Space key exists to prevent going from this layer directly into the Number layer. Similarly, the Shift key on the left pinky helps make sure that the normal letter (Z) doesn't fire.
+
+## Number and Symbol Layer ##
+
+![Atreus number and symbol layer](atreus-replica-num.png)
+
+This layer provides the only way of accessing number keys on this keyboard, since it's too small for its own number row. Note that even though they are laid out in the number pad fashion, they send the "regular" number keystrokes. Games and programs that specifically use NumPad keys are not supported in this layout at the moment.
+
+This layer also provides plenty of symbol shortcuts. Most of these can be accessed through other means (like Shift+8 for the asterisk), but having shortcut keys to them makes for one less keypress, which adds up quickly when using these symbols on a regular basis. I've been through many revisions of this concept on my Ergodox as well as the Atreus, and I've finally arrived at this layout as the one that provides the symbols I need most frequently in places I can think to expect them. The Ordinary layout from the Ergodox-EZ keyboard in this repository was a large influence in this design.
+
+## Function Layer ##
+
+![Atreus function layer](atreus-replica-function.png)
+
+Function keys (F1-F12) are on this layer, as well as some more generic "functions" such as media keys. I've also set up a mirror image of the arrows from the Extend layer in case I need to use these with my left hand, but I don't do this very often.
+
+The reset key is on this layer, as well as a toggle from Colemak to QWERTY and back. The QWERTY layer is not currently documented, but it is functionally identical to the base layer except for letter positions.
+
+## Gaming Layer ##
+
+![Atreus gaming layer](atreus-replica-game.png)
+
+This is a small layer developed to allow some simple gameplay without a mouse. This layer is a toggle (from the Number layer), so it is designed to stay on while in use.
+
+The keys on the left hand bring Space into the left thumb's reach, as well as overriding the dual-role Shift with its standard function (Z in both QWERTY and in Colemak). This allows easy Shift presses without blocking the Z key, commonly used in games.
+
+I would probably not consider this a hard-core gaming keyboard, and this layout does have the huge problem of blocking access to the number keys, but for more casual games, it plays quite well. I've used it quite a bit on Minecraft, for example, and I'm quite pleased with it.
\ No newline at end of file
-- 
cgit v1.2.3


From 936a26d04ffa12801031c058f27e221174e3fabd Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Thu, 25 Aug 2016 00:15:41 -0500
Subject: Added pin support for A0-A7

Vision Division - It works!
---
 keyboards/vision_division/config.h                 | 2 +-
 keyboards/vision_division/keymaps/default/Makefile | 2 +-
 keyboards/vision_division/keymaps/default/config.h | 6 +++---
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
index 37b834973c..f50378ffa8 100644
--- a/keyboards/vision_division/config.h
+++ b/keyboards/vision_division/config.h
@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 /* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
+#define DIODE_DIRECTION ROW2COL
 
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
index 393a9e23a6..ecbe7e1ab2 100644
--- a/keyboards/vision_division/keymaps/default/Makefile
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -10,7 +10,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = yes          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
index 34eaaff5b7..16740fb15b 100644
--- a/keyboards/vision_division/keymaps/default/config.h
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -7,7 +7,7 @@
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      GET_PID(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define PRODUCT_ID      GET_PID(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    IBNobody
 #define PRODUCT         Vision Division
@@ -17,8 +17,8 @@
 #define MATRIX_ROWS 6
 #define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
 
-#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
-#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
+#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
 
 #define UNUSED_PINS
 
-- 
cgit v1.2.3


From 601feed87e3ab303fbc7b5987dd6d451b6fa3453 Mon Sep 17 00:00:00 2001
From: JeeBak Kim <jeebak.kim@gmail.com>
Date: Tue, 23 Aug 2016 20:08:06 -0700
Subject: [jd45] Add "jeebak" keymap folder as a copy of the "default" folder

---
 keyboards/jd45/keymaps/jeebak/keymap.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 keyboards/jd45/keymaps/jeebak/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/jd45/keymaps/jeebak/keymap.c b/keyboards/jd45/keymaps/jeebak/keymap.c
new file mode 100644
index 0000000000..95abb1505c
--- /dev/null
+++ b/keyboards/jd45/keymaps/jeebak/keymap.c
@@ -0,0 +1,17 @@
+#include "jd45.h"
+
+/* this keymap is to provide a basic keyboard layout for testing the matrix
+ * for more practical and complicated keymap refer to other keymaps in the same folder
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(
+  ESC,   Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,     QUOT, BSPC,
+  TAB,   A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN,  ENT,
+  LSFT,  Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,  RSFT,
+  PAUSE, LCTL, LALT, DEL,  SPC,  DEL,  LEFT, UP,   DOWN, RIGHT ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
-- 
cgit v1.2.3


From 9c0c8c307d36aa7a1909718e5da58a0eb8fcedb6 Mon Sep 17 00:00:00 2001
From: JeeBak Kim <jeebak.kim@gmail.com>
Date: Tue, 23 Aug 2016 20:56:19 -0700
Subject: [jd45] Port jeebak's planck keymap to jd45

---
 keyboards/jd45/keymaps/jeebak/config.h  |  16 ++
 keyboards/jd45/keymaps/jeebak/keymap.c  | 424 +++++++++++++++++++++++++++++++-
 keyboards/jd45/keymaps/jeebak/readme.md | 129 ++++++++++
 3 files changed, 560 insertions(+), 9 deletions(-)
 create mode 100644 keyboards/jd45/keymaps/jeebak/config.h
 create mode 100644 keyboards/jd45/keymaps/jeebak/readme.md

(limited to 'keyboards')

diff --git a/keyboards/jd45/keymaps/jeebak/config.h b/keyboards/jd45/keymaps/jeebak/config.h
new file mode 100644
index 0000000000..53a1f0a307
--- /dev/null
+++ b/keyboards/jd45/keymaps/jeebak/config.h
@@ -0,0 +1,16 @@
+#include "../../config.h"
+
+/**
+ *JD45 keymap definition macro
+ */
+#define KEYMAP_JD45( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
+    K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \
+    K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \
+    K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \
+) { \
+    { K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K10,   K11,   K12,   K13   }, \
+    { K14,   K15,   K16,   K17,   K18,   K19,   K20,   K21,   K22,   K23,   K24,   K25,   KC_NO }, \
+    { K26,   K27,   K28,   K29,   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   KC_NO }, \
+    { K38,   K39,   K40,   K41,   K42, KC_NO,   K43, KC_NO,   K44,   K45,   K46,   K47,   KC_NO }  \
+}
diff --git a/keyboards/jd45/keymaps/jeebak/keymap.c b/keyboards/jd45/keymaps/jeebak/keymap.c
index 95abb1505c..ac3e010a91 100644
--- a/keyboards/jd45/keymaps/jeebak/keymap.c
+++ b/keyboards/jd45/keymaps/jeebak/keymap.c
@@ -1,17 +1,423 @@
 #include "jd45.h"
 
-/* this keymap is to provide a basic keyboard layout for testing the matrix
- * for more practical and complicated keymap refer to other keymaps in the same folder
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _TOUCHCURSOR 6
+#define _MOUSECURSOR 7
+#define _ADJUST 16
+
+// Keycodes
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+enum macro_keycodes {
+  KC_ALT_TAB,
+  KC_CMD_TAB,
+  KC_CTL_TAB,
+  KC_CMD_SLSH,
+  KC_AG_FIND,
+  KC_AG_AGAIN,
+  KC_AG_UNDO,
+  KC_AG_CUT,
+  KC_AG_COPY,
+  KC_AG_PASTE,
+  KC_AG_DESK_L,
+  KC_AG_DESK_R,
+  KC_AG_TAB_C,
+  KC_AG_TAB_N,
+  KC_AG_TAB_R,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper
+#define GUI_SEM     GUI_T(KC_SCLN)              // Tap for Semicolon, hold for GUI
+#define ALT_QUO     ALT_T(KC_QUOT)              // Tap for Quote, hold for Alt
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_TC       LT(_TOUCHCURSOR, KC_SPC)    // L-ayer T-ap T-ouch C-ursor
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define ALT_TAB     M(KC_ALT_TAB)               // Macro for Alt-Tab
+#define CMD_TAB     M(KC_CMD_TAB)               // Macro for Cmd-Tab
+#define CTL_TAB     M(KC_CTL_TAB)               // Macro for Ctl-Tab
+#define CMD_SLSH    M(KC_CMD_SLSH)              // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility)
+#define AG_FIND     M(KC_AG_FIND)               // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings
+#define AG_AGAIN    M(KC_AG_AGAIN)
+#define AG_UNDO     M(KC_AG_UNDO)
+#define AG_CUT      M(KC_AG_CUT)
+#define AG_COPY     M(KC_AG_COPY)
+#define AG_PASTE    M(KC_AG_PASTE)
+#define AG_D_L      M(KC_AG_DESK_L)             // For Virtual Desktop Switching: Left, and
+#define AG_D_R      M(KC_AG_DESK_R)             //                                Right
+#define AG_T_C      M(KC_AG_TAB_C)              // For Chrome, etc. Tab Close,
+#define AG_T_N      M(KC_AG_TAB_N)              //                  Tab New, and
+#define AG_T_R      M(KC_AG_TAB_R)              //                  Tab Reopen Closed
+
+/* Qwerty
+ *
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   [  | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * | Ctrl/Esc |   A  |   S  | MC/D |   F  |   G  |   H  |   J  |   K  |   L  |GUI/; |   Alt/"    |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   Shift   |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
  */
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP(
-  ESC,   Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,     QUOT, BSPC,
-  TAB,   A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN,  ENT,
-  LSFT,  Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,  RSFT,
-  PAUSE, LCTL, LALT, DEL,  SPC,  DEL,  LEFT, UP,   DOWN, RIGHT ),
-};
+[_QWERTY] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    HPR_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    CTL_ESC ,   KC_A, KC_S,LT_MC(KC_D),    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, GUI_SEM,    ALT_QUO     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  ,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_RGUI  ,  KC_LALT  ,  KC_LGUI  ,   LOWER   ,   LT_TC   ,   LT_TC   ,    RAISE  ,  KC_VOLD  ,  KC_VOLU  , KC_MPLY),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Colemak
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |Hyper/Tab|   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  |   [  | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * | Ctrl/Esc |   A  |   R  | MC/S |   T  |   D  |   H  |   N  |   E  |   I  |   O  |    "       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | Shift     |   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_COLEMAK] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    HPR_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, KC_LBRC, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    CTL_ESC ,   KC_A, KC_R,LT_MC(KC_S),    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  ,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_RGUI  ,  KC_LALT  ,  KC_LGUI  ,   LOWER   ,   LT_TC   ,   LT_TC   ,    RAISE  ,  KC_VOLD  ,  KC_VOLU  , KC_MPLY),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Dvorak
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |Hyper/Tab|   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |   /  | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * | Ctrl/Esc |   A  |   O  | MC/E |   U  |   I  |   D  |   H  |   T  |   N  |   S  |    /       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | Shift     |   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_DVORAK] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    HPR_TAB,KC_QUOT, KC_COMM,  KC_DOT,    KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L, KC_SLSH, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    CTL_ESC ,   KC_A,    KC_O,LT_MC(KC_E), KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  , KC_SCLN,   KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_RGUI  ,  KC_LALT  ,  KC_LGUI  ,   LOWER   ,   LT_TC   ,   LT_TC   ,    RAISE  ,  KC_VOLD  ,  KC_VOLU  , KC_MPLY),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Lower
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |   [      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |   "|"      |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   ]       |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   -  |   =  |   [  |   ]  |    \      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_LOWER] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    KC_TILD,KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    KC_LBRC ,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR,    KC_PIPE     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_RBRC  ,  KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC,    KC_BSLS    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    BACKLIT  ,    _______,    _______,    _______,  _______  ,  _______  ,    _______,    KC_MPRV,    KC_MNXT, KC_MUTE),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Raise
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |   $      |   4  |   5  |   6  |   .  |   +  |   .  |   4  |   5  |   6  |   *  |   "|"      |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   =       |   7  |   8  |   9  |   0  |   -  |   .  |   1  |   2  |   3  |   /  |    \      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_RAISE] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    KC_0   ,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, _______, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    KC_DLR  ,   KC_4,    KC_5,    KC_6,  KC_DOT, KC_PLUS,  KC_DOT,    KC_4,    KC_5,    KC_6, KC_ASTR,    KC_PIPE     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_EQL   ,   KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_DOT,    KC_1,    KC_2,    KC_3, KC_SLSH,    KC_BSLS    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    BACKLIT  ,    _______,    _______,    _______,  _______  ,  _______  ,    _______,    KC_MPRV,    KC_MNXT, KC_MUTE),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * | AltTab  |CmdTab|CtlTab| GUI  |Shift |  ~   |Insert| Home |  Up  | End  | Bksp |      |      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |          | Alt  |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|  Desk_R    |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           | Undo | Cut  | Copy |Paste |  `   | PgDn | Del  |Tab_N |Tab_R |iTerm2|           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |        |       |       |       |          |          |         |        |        |          |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ *
+ * The KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND, and KC_AGAIN keycodes don't
+ * seem to work on Mac. Presumably they'll work under Windows.
+ */
 
-const uint16_t PROGMEM fn_actions[] = {
+[_TOUCHCURSOR] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    ALT_TAB,CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD,  KC_INS, KC_HOME,   KC_UP,  KC_END, KC_BSPC, _______, _______,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    _______ ,KC_LALT,  KC_SPC,  AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT,  AG_D_L,    AG_D_R      ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,AG_UNDO,  AG_CUT, AG_COPY,AG_PASTE,  KC_GRV, KC_PGDN,  KC_DEL,  AG_T_N,  AG_T_R,CMD_SLSH,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______  ,    _______,    _______,    _______, _______   , _______   ,    _______,    _______,    _______, _______),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
 
+/* Mouse Layer
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |         |      |ACCL0 |      |      |      |      |WHL_L |  Up  |WHL_R | BTN2 |      |      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |          |ACCL2 | BTN2 |      | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 |   BTN5     |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           |      |      |      | BTN3 |      |WHL_Dn| BTN1 |      |      | BTN3 |           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |        |       |       |       |          |          |         |        |        |          |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+
+[_MOUSECURSOR] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    _______,_______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______, _______,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    _______ ,KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4,    KC_BTN5     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,_______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______  ,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Plover layer (http://opensteno.org)
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |      #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |         |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |     D       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | TogOut    |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |    Z      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * | Exit   |       |   A   |   O   |          |          |    E    |   U    |        |          |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+
+[_PLOVER] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    KC_1   ,   KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,  KC_1  ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    XXXXXXX ,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    XXXXXXX  ,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,    KC_QUOT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    EXT_PLV  ,    XXXXXXX,       KC_C,       KC_V,  XXXXXXX  ,  XXXXXXX  ,       KC_N,       KC_M,    XXXXXXX, XXXXXXX),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Adjust (Lower + Raise)
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |         |      |      |      |      |      |      |      |      |      |      |      | Del  |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |          |      |      |      |      |AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|            |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           |      |      |      |      |     |       |      |      |      |      |           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |        |       |       |       |          |          |         |        |        |  Reset   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_ADJUST] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    _______,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    _______ ,_______, _______, _______, _______, AG_NORM, AG_SWAP,  QWERTY, COLEMAK,  DVORAK,  PLOVER,    _______     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______  ,    _______,    _______,    _______,  _______  ,  _______  ,    _______,    _______,    _______,  RESET)
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
 };
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    bool use_cmd = true;    // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc.
+    // Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in:
+    // quantum/quantum.c
+    if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) {
+      use_cmd = false;      // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc.
+    }
+
+    switch (id) {
+      case KC_ALT_TAB:
+        if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT),  D(TAB), END ) : MACRO( U(TAB), END )); }
+        else        { return (record->event.pressed ? MACRO( D(LGUI),  D(TAB), END ) : MACRO( U(TAB), END )); }
+      case KC_CMD_TAB:
+        if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI),  D(TAB), END ) : MACRO( U(TAB), END )); }
+        else        { return (record->event.pressed ? MACRO( D(LALT),  D(TAB), END ) : MACRO( U(TAB), END )); }
+
+      case KC_CTL_TAB:
+        return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END ));
+      case KC_CMD_SLSH:
+        return (record->event.pressed ? MACRO( D(LGUI),  D(SLSH),END ) : MACRO( U(SLSH),END ));
+
+      case KC_AG_FIND:
+        return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END );
+      case KC_AG_AGAIN:
+        return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END );
+      case KC_AG_UNDO:
+        return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END );
+      case KC_AG_CUT:
+        return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END );
+      case KC_AG_COPY:
+        return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END );
+      case KC_AG_PASTE:
+        return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END );
+
+      case KC_AG_DESK_L:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END );
+      case KC_AG_DESK_R:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END );
+
+      case KC_AG_TAB_C:
+        return use_cmd ? MACRODOWN( D(LGUI),            T(W), END ) : MACRODOWN( D(LCTRL),            T(W), END );
+      case KC_AG_TAB_N:
+        return use_cmd ? MACRODOWN( D(LGUI),            T(T), END ) : MACRODOWN( D(LCTRL),            T(T), END );
+      case KC_AG_TAB_R:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END );
+    }
+
+    return MACRO_NONE;
+}
diff --git a/keyboards/jd45/keymaps/jeebak/readme.md b/keyboards/jd45/keymaps/jeebak/readme.md
new file mode 100644
index 0000000000..2e45a46d9b
--- /dev/null
+++ b/keyboards/jd45/keymaps/jeebak/readme.md
@@ -0,0 +1,129 @@
+jeebak's JD45 layout
+=======================
+NOTE: This is a port of jeebak's planck layout, for jd45.
+
+This WIP keymap attempts to minimize fingers straying away from the home row.
+To aid in this endeavor, when additional modifyer keys to switch layers are
+needed, they will be mapped to home row keys. The `keymap.c` file will contain
+the exact changes. The diagrams in this README shows the highlights of the
+changes from the default mappings.
+
+I also decided to change all calls to `persistant_default_layer_set()` to
+`default_layer_set()` since this is my personal perference.
+
+## Macros
+```
+#define ALT_TAB     M(KC_ALT_TAB)
+```
+
+## Base Layers (Qwerty/Colemak/Dvorak)
+These base layers are mostly the same as the default mappings. The interesting
+changes are shown below.
+
+- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held,
+- `GUI/;` as `;` and `GUI`,
+- `Alt/"` as `"` and `Alt`,
+- `Sft/Ent` as `Enter` and `Shift`, and
+- `Hyper/Tab` as `Tab` and `Hyper`
+
+A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped.
+The arrow keys, which have been moved to the
+[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been
+replaced with the Media keys as shown. The `MC/kc` key activates the
+`MouseCursor` layer when held, and emits the corresponding `kc` for its layer,
+when tapped.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   [  | Bksp |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  | Ctrl/Esc |   A  |   S  | MC/D |   F  |   G  |   H  |   J  |   K  |   L  |GUI/; |   Alt/"    |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   Shift   |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## Lower Layer (Symbols and Function Keys)
+The symbols and functions keys are essentially the same as the default mapping.
+The most notable changes are that the symbol keys from the `RAISE` layer have
+been moved here. The remaining Media keys replace those that are now on the
+base layers. The `BACKLIT` key has also been moved here.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      | Bksp |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |   [      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |   "|"      |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   ]       |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   -  |   =  |   [  |   ]  |    \      |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## Raise Layer (Numbers and Arithmetic Operators)
+All of the numbers and arithmetic operators are available on this layer. Some
+keys are duplicated for the convenience of their positions. The `0` and `$`
+keys at the far left are for quick access to beginning and end of line in vim.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      | Bksp |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |   $      |   4  |   5  |   6  |   .  |   +  |   .  |   4  |   5  |   6  |   *  |   "|"      |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   =       |   7  |   8  |   9  |   0  |   -  |   .  |   1  |   2  |   3  |   /  |    \      |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## TouchCursor layer plus personal customizations
+[TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key
+as the modifier, with the `IJKL` home row keys representing the inverted-T of
+the arrow keys. All of the default TouchCursor keymappings for the right hand
+are represented below. My personalizations include all of the keys shown for
+the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key
+from the base layers) readily accessible from the home row allows quick word
+jumps and highlighting when used in conjunction with the arrow keys. The
+`Alt-Tab` macro is not only useful under Windows, but also under Mac when used
+with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch).
+The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in
+this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN`
+keycodes do not seem to work. There are macros in place that'll "automatically"
+choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`,
+etc.) depending on which layout you've currently selected (`AG_NORM` or
+`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I
+use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and
+`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as
+Google Chrome.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  | AltTab  |CmdTab|CtlTab| GUI  |Shift |  ~   |Insert| Home |  Up  | End  | Bksp |      |      |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |          | Alt  |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|  Desk_R    |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |           | Undo | Cut  | Copy |Paste |  `   | PgDn | Del  |Tab_N |Tab_R |iTerm2|           |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |        |       |       |       |          |          |         |        |        |          |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## Mouse Layer
+The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer.
+The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the
+mouse from the `doc/keycode.txt` file are represented, and logically located,
+IMHO. The left and right click buttons are duplicated; on the right hand side,
+for a quick click here and there, and again on the left hand side for when the
+buttons need to be held for dragging things or highlighting text, thus allowing
+the right hand to be free to use the up/down/left/right actions.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |         |      |ACCL0 |      |      |      |      |WHL_L |  Up  |WHL_R | BTN2 |      |      |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |          |ACCL2 | BTN2 |      | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 |   BTN5     |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |           |      |      |      | BTN3 |      |WHL_Dn| BTN1 |      |      | BTN3 |           |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |        |       |       |       |          |          |         |        |        |          |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
-- 
cgit v1.2.3


From c34399c5924c321d037e154bb3d5781dcc5c433a Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Thu, 25 Aug 2016 08:29:30 +0200
Subject: - Updated kc60/readme - Added layout examples for kc60

---
 keyboards/kc60/kc60.h    | 69 ++++++++++++++++++++++++++++++++++++++++++++++++
 keyboards/kc60/readme.md |  7 +++++
 2 files changed, 76 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/kc60/kc60.h b/keyboards/kc60/kc60.h
index f11d3435c9..c3a0165c09 100644
--- a/keyboards/kc60/kc60.h
+++ b/keyboards/kc60/kc60.h
@@ -8,6 +8,19 @@
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a multi-dimensional array
+/*
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | K49 |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3D       | K3C |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
 #define KEYMAP( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
@@ -23,3 +36,59 @@
 }
 
 #endif
+
+/* Default layout
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C             |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+
+/* Mini Lshift
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30   |K31| K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C             |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+
+/* Mini Rshift
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | K3D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+
+/* Mini Enter
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | K2D   |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C             |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
\ No newline at end of file
diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md
index acc0df68dc..b29c6be302 100644
--- a/keyboards/kc60/readme.md
+++ b/keyboards/kc60/readme.md
@@ -25,3 +25,10 @@ Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` fol
 ![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg)
 
 Build with WS2812 Support by running `make KEYMAP=ws2812`.
+
+## Warning
+For those who want to use 2x1U instead of classic backspace you need to use K0D and K49 like this:
+* K0D represents the key at the right of =.
+* K49 represents the last key of the row (is wired at the right of the space key on the PCB)
+
+In kc60.h I've put several definitions' examples of possible layouts proposed by online editor (http://123.57.250.164:9128/).
\ No newline at end of file
-- 
cgit v1.2.3


From 94597a27c5d138eb269d864c57e2de89207f7f91 Mon Sep 17 00:00:00 2001
From: JeeBak Kim <jeebak.kim@gmail.com>
Date: Thu, 25 Aug 2016 03:06:42 -0700
Subject: Make the "extra" key in the top row another backspace

---
 keyboards/jd45/keymaps/jeebak/keymap.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/jd45/keymaps/jeebak/keymap.c b/keyboards/jd45/keymaps/jeebak/keymap.c
index ac3e010a91..8d26cbde12 100644
--- a/keyboards/jd45/keymaps/jeebak/keymap.c
+++ b/keyboards/jd45/keymaps/jeebak/keymap.c
@@ -78,7 +78,7 @@ enum macro_keycodes {
 /* Qwerty
  *
  * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
- * |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   [  | Bksp |
+ * |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp | Bksp |
  * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
  * | Ctrl/Esc |   A  |   S  | MC/D |   F  |   G  |   H  |   J  |   K  |   L  |GUI/; |   Alt/"    |
  * |----------`------`------`------`------`------`------`------`------`------`------`------------|
@@ -91,7 +91,7 @@ enum macro_keycodes {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_QWERTY] = KEYMAP_JD45(
 /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
-    HPR_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_BSPC,
+    HPR_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_BSPC, KC_BSPC,
 /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
     CTL_ESC ,   KC_A, KC_S,LT_MC(KC_D),    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, GUI_SEM,    ALT_QUO     ,
 /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
@@ -102,7 +102,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Colemak
  * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
- * |Hyper/Tab|   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  |   [  | Bksp |
+ * |Hyper/Tab|   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp | Bksp |
  * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
  * | Ctrl/Esc |   A  |   R  | MC/S |   T  |   D  |   H  |   N  |   E  |   I  |   O  |    "       |
  * |----------`------`------`------`------`------`------`------`------`------`------`------------|
@@ -113,7 +113,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_COLEMAK] = KEYMAP_JD45(
 /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
-    HPR_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, KC_LBRC, KC_BSPC,
+    HPR_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, KC_BSPC, KC_BSPC,
 /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
     CTL_ESC ,   KC_A, KC_R,LT_MC(KC_S),    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT     ,
 /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
@@ -124,7 +124,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Dvorak
  * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
- * |Hyper/Tab|   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |   /  | Bksp |
+ * |Hyper/Tab|   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp | Bksp |
  * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
  * | Ctrl/Esc |   A  |   O  | MC/E |   U  |   I  |   D  |   H  |   T  |   N  |   S  |    /       |
  * |----------`------`------`------`------`------`------`------`------`------`------`------------|
@@ -135,7 +135,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_DVORAK] = KEYMAP_JD45(
 /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
-    HPR_TAB,KC_QUOT, KC_COMM,  KC_DOT,    KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L, KC_SLSH, KC_BSPC,
+    HPR_TAB,KC_QUOT, KC_COMM,  KC_DOT,    KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L, KC_BSPC, KC_BSPC,
 /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
     CTL_ESC ,   KC_A,    KC_O,LT_MC(KC_E), KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH     ,
 /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
@@ -146,7 +146,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Lower
  * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
- * |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      | Bksp |
+ * |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp | Bksp |
  * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
  * |   [      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |   "|"      |
  * |----------`------`------`------`------`------`------`------`------`------`------`------------|
@@ -157,7 +157,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_LOWER] = KEYMAP_JD45(
 /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
-    KC_TILD,KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, KC_BSPC,
+    KC_TILD,KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_BSPC,
 /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
     KC_LBRC ,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR,    KC_PIPE     ,
 /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
@@ -168,7 +168,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Raise
  * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
- * |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      | Bksp |
+ * |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp | Bksp |
  * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
  * |   $      |   4  |   5  |   6  |   .  |   +  |   .  |   4  |   5  |   6  |   *  |   "|"      |
  * |----------`------`------`------`------`------`------`------`------`------`------`------------|
@@ -179,7 +179,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_RAISE] = KEYMAP_JD45(
 /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
-    KC_0   ,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, _______, KC_BSPC,
+    KC_0   ,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_BSPC, KC_BSPC,
 /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
     KC_DLR  ,   KC_4,    KC_5,    KC_6,  KC_DOT, KC_PLUS,  KC_DOT,    KC_4,    KC_5,    KC_6, KC_ASTR,    KC_PIPE     ,
 /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
-- 
cgit v1.2.3


From 1bbd3c1eea78abf0b36a289fb37f80dfc4f9c8bb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ren=C3=A9=20Werner?= <mail@renewerner.net>
Date: Thu, 25 Aug 2016 12:25:57 +0200
Subject: fixed defaulf keymap, added my own keymap

now the LEDs are working like they should
---
 keyboards/kitten_paw/Makefile                  |   2 +-
 keyboards/kitten_paw/keymaps/ickerwx/keymap.c  | 128 +++++++++++++++----------
 keyboards/kitten_paw/keymaps/ickerwx/readme.md |  18 ++++
 keyboards/kitten_paw/kitten_paw.c              |  19 +++-
 keyboards/kitten_paw/kitten_paw.h              |  11 +++
 keyboards/kitten_paw/led.c                     |  47 ---------
 keyboards/kitten_paw/matrix.c                  |   3 +-
 7 files changed, 123 insertions(+), 105 deletions(-)
 create mode 100644 keyboards/kitten_paw/keymaps/ickerwx/readme.md
 delete mode 100644 keyboards/kitten_paw/led.c

(limited to 'keyboards')

diff --git a/keyboards/kitten_paw/Makefile b/keyboards/kitten_paw/Makefile
index 9122921737..3b5585ed6f 100644
--- a/keyboards/kitten_paw/Makefile
+++ b/keyboards/kitten_paw/Makefile
@@ -69,7 +69,7 @@ BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE ?= no           # Audio output on port C6
 
 CUSTOM_MATRIX = yes
-SRC += matrix.c led.c
+SRC += matrix.c
 
 ifndef QUANTUM_DIR
 	include ../../Makefile
diff --git a/keyboards/kitten_paw/keymaps/ickerwx/keymap.c b/keyboards/kitten_paw/keymaps/ickerwx/keymap.c
index 276fc30a80..9a00c80dc8 100644
--- a/keyboards/kitten_paw/keymaps/ickerwx/keymap.c
+++ b/keyboards/kitten_paw/keymaps/ickerwx/keymap.c
@@ -3,8 +3,14 @@
 
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
-#define LC LCTL
+#define  C(kc) LCTL(KC_##kc)
+#define RA(kc) RALT(KC_##kc)
 #define KC_SLCT KC_SELECT
+#define MEDAPP LT(MEDIA, KC_APP)
+#undef S
+#define S(kc) LSFT(KC_##kc)
+
+uint8_t current_layer_global = 255;
 
 enum layers {
     DEFAULT,
@@ -33,75 +39,75 @@ enum macro_id {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [DEFAULT] = KEYMAP(\
-       KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,    KC_F10,    KC_F11,               KC_F12,          KC_PSCR,KC_SLCK,KC_PAUS,                        \
-       KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,      KC_0,   KC_MINS,               KC_EQL,KC_BSPC,   KC_INS,KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
-       KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,      KC_P,   KC_LBRC,              KC_RBRC,KC_BSLS,   KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
-         F(0),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,   KC_QUOT,                       KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
-         F(8),KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM,    KC_DOT,   KC_SLSH,                         F(9),            KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
-         F(1),KC_LGUI,   F(3),               LT(MISC, KC_SPC),                              F(4),      F(5),  LT(MEDIA,   KC_APP),   F(2),  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT),
-  /* Layer 1: Programming Layer 1, emulating US layout */
+          KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,           KC_PSCR,KC_SLCK,KC_PAUS,                                   \
+          KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC,    KC_INS,KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+          KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,    KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
+            F(0),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,                               KC_P4,  KC_P5,  KC_P6,         \
+            F(8),KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,           F(9),             KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
+            F(1),KC_LGUI,   F(3),              LT(MISC,  KC_SPC),                           F(4),   F(5), MEDAPP,   F(2),   KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT),
+  /* Layer 1: Programming Layer 1, emulating US l ayout */
   [PROG1] = KEYMAP(\
-       KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,   _______,   _______,                _______,_______,_______,                         \
-       M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,   KC_SLSH,   S(KC_0),      _______,  _______,_______,_______,  _______,_______,_______,_______, \
-      _______,_______,_______,_______,_______,_______,   KC_Z,_______,_______,_______,   _______,RALT(KC_8),RALT(KC_9),RALT(KC_MINS),  _______,_______,_______,  _______,_______,_______,_______, \
-      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(KC_COMM),S(KC_BSLS),                 _______,                            _______,_______,_______,      \
-    MO(PROG2),_______,   KC_Y,_______,_______,_______,_______,_______,_______,_______,   _______,   S(KC_7),               MO(PROG2),          _______,          _______,_______,_______,_______, \
-      _______,_______,_______,                        _______,                           _______,   _______,   _______,      _______,  _______,_______,_______,  _______,_______),
+          KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
+          M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_SLSH,   S(0),_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,_______,_______,_______,_______,   KC_Z,_______,_______,_______,_______,  RA(8),  RA(9),RA(MINS),  _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(COMM),S(BSLS),        _______,                             _______,_______,_______,         \
+       MO(PROG2),_______,   KC_Y,_______,_______,_______,_______,_______,_______,_______,_______,   S(7),      MO(PROG2),           _______,          _______,_______,_______,_______, \
+         _______,_______,_______,                        _______,                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
     /* Layer 2: programming layer 2
        all keys that are not FN keys are sent as LSFT+key on this layer
     */
   [PROG2] = KEYMAP(\
-      _______,   _______,   _______,_______,_______,_______, _______,_______,   _______,_______,   _______,    _______,   _______,                _______,_______,_______,                        \
-RALT(KC_RBRC),   _______,RALT(KC_Q),KC_BSLS,_______,_______,M(CFLEX),S(KC_6),S(KC_RBRC),S(KC_8),   S(KC_9), S(KC_SLSH),   KC_RBRC,      _______,  _______,_______,_______,  _______,_______,_______,_______, \
-      _______,   _______,   _______,_______,_______,_______, _______,_______,   _______,_______,   _______, RALT(KC_7),RALT(KC_0),RALT(KC_NUBS),  _______,_______,_______,  _______,_______,_______,_______, \
-      _______,   _______,   _______,_______,_______,_______, _______,_______,   _______,_______, S(KC_DOT),    S(KC_2),                 _______,                            _______,_______,_______,      \
-      _______,S(KC_NUBS),   _______,_______,_______,_______, _______,_______,   _______,KC_NUBS,S(KC_NUBS), S(KC_MINS),                 _______,          _______,          _______,_______,_______,_______, \
-      _______,   _______,   _______,                         _______,                              _______,    _______,   _______,      _______,  _______,_______,_______,  _______,_______),          \
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
+        RA(RBRC),_______,  RA(Q),KC_BSLS,_______,_______,M(CFLEX),  S(6),S(RBRC),   S(8),   S(9),S(SLSH),KC_RBRC,_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  RA(7),  RA(0),RA(NUBS),  _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, S(DOT),   S(2),        _______,                             _______,_______,_______,         \
+         _______,S(NUBS),_______,_______,_______,_______,_______,_______,_______,KC_NUBS,S(NUBS),S(MINS),        _______,           _______,          _______,_______,_______,_______, \
+         _______,_______,_______,                        _______,                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
     /* Layer 3: media layer */
-  [MEDIA] = KEYMAP(\
-          KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,          XXXXXXX,XXXXXXX,XXXXXXX,                   \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  KC_MPRV,KC_MPLY,KC_MNXT,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  KC_VOLD,KC_MUTE,KC_VOLU,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,                            XXXXXXX,XXXXXXX,XXXXXXX,      \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,          KC_EJCT,          XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,XXXXXXX,XXXXXXX,                        XXXXXXX,                        XXXXXXX,XXXXXXX,_______,XXXXXXX,  KC_MRWD,KC_MSTP,KC_MFFD,  XXXXXXX,XXXXXXX),
+  [MEDIA] = KEYMAP(\ 
+          KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,           XXXXXXX,XXXXXXX,XXXXXXX,                                   \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,   KC_MPRV,KC_MPLY,KC_MNXT,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,   KC_VOLD,KC_MUTE,KC_VOLU,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,                             XXXXXXX,XXXXXXX,XXXXXXX,         \
+         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,           KC_EJCT,          XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+         XXXXXXX,XXXXXXX,XXXXXXX,                        XXXXXXX,                        XXXXXXX,XXXXXXX,_______,XXXXXXX,   KC_MRWD,KC_MSTP,KC_MFFD,  XXXXXXX,XXXXXXX),
     /* Layer 4: Mouse layer */
   [MOUSE1] = KEYMAP(\
-            F(6),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,          XXXXXXX,XXXXXXX,XXXXXXX,                         \
-         XXXXXXX,KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,KC_BSPC,   KC_INS,KC_HOME,KC_PGUP,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,KC_BTN4, KC_WH_D, KC_MS_U, KC_WH_U, XXXXXXX,   KC_Y,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,   KC_DEL, KC_END,KC_PGDN,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-            F(0),KC_BTN5, KC_MS_L, KC_MS_D, KC_MS_R,    F(7),KC_WH_L,KC_WH_D,KC_WH_U,    KC_WH_R,    XXXXXXX,XXXXXXX,        KC_BTN1,                            XXXXXXX,XXXXXXX,XXXXXXX,      \
-      MO(MOUSE2),XXXXXXX,LC(KC_Y),LC(KC_X),LC(KC_C),LC(KC_V),XXXXXXX,KC_BTN2,KC_BTN3,LC(KC_PGUP),LC(KC_PGDN),XXXXXXX,        KC_RSFT,            KC_UP,          XXXXXXX,XXXXXXX,XXXXXXX,KC_PENT, \
-         KC_LCTL,KC_LGUI,KC_LALT,                            KC_BTN1,                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,  XXXXXXX,XXXXXXX),
+            F(6),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
+         _______,KC_ACL0,KC_ACL1,KC_ACL2,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,KC_BTN4,KC_WH_D,KC_MS_U,KC_WH_U,_______,   C(Z),_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,KC_BTN5,KC_MS_L,KC_MS_D,KC_MS_R,   F(7),KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,_______,_______,        _______,                             _______,_______,_______,         \
+      MO(MOUSE2),_______,   C(Y),   C(X),   C(C),   C(V),_______,KC_BTN2,KC_BTN3,C(PGUP),C(PGDN),_______,        KC_RSFT,           _______,          _______,_______,_______,_______, \
+         KC_LCTL,_______,KC_LALT,                        KC_BTN1,                        KC_RALT,KC_RGUI, KC_APP,KC_RCTL,   _______,_______,_______,  _______,_______),
     /* Layer 5: Mouse layer 2*/
   [MOUSE2] = KEYMAP(\
-         _______,_______,_______,  _______, _______, _______,_______,_______,_______,   _______,     _______,_______,_______,          _______,_______,_______,                         \
-         _______,_______,_______,  _______, _______, _______,_______,_______,_______,   _______,     _______,_______,_______,_______,  _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,KC_BTN2,  KC_WH_U, KC_BTN3, _______,_______,_______,_______,   _______,     _______,_______,_______,_______,  _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,KC_WH_L,  KC_WH_D, KC_WH_R, _______,KC_MS_L,KC_MS_D,KC_MS_U,   KC_MS_R,     _______,_______,        _______,                            _______,_______,_______,      \
-         _______,_______,_______,  _______, _______, _______,_______,_______,_______,   _______,     _______,_______,        _______,          _______,          _______,_______,_______,_______, \
-         _______,_______,_______,                            _______,                                _______,_______,_______,_______,  _______,_______,_______,  _______,_______),
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,KC_BTN2,KC_WH_U,KC_BTN3,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,KC_WH_L,KC_WH_D,KC_WH_R,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______,        _______,                             _______,_______,_______,         \
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,           _______,          _______,_______,_______,_______, \
+         _______,_______,_______,                        _______,                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
     /* Layer 6: Misc layer */
   [MISC] = KEYMAP(\
-         XXXXXXX, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17, KC_F18, KC_F19, KC_F20,     KC_F21,     KC_F22, KC_F23, KC_F24,          XXXXXXX,XXXXXXX,XXXXXXX,                         \
-         XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,    XXXXXXX,    XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,KC_SLCT,LC(KC_W),   KC_UP, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,KC_BSPC,     KC_DEL,    XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX,KC_HOME,KC_PGDN,KC_PGUP,    XXXXXXX,    XXXXXXX,XXXXXXX,        XXXXXXX,                            XXXXXXX,XXXXXXX,XXXXXXX,      \
-         KC_LSFT,XXXXXXX,LC(KC_Y),LC(KC_X),LC(KC_C),LC(KC_V), KC_SPC, KC_END,XXXXXXX,LC(KC_PGUP),LC(KC_PGDN),XXXXXXX,        KC_RSFT,          XXXXXXX,          XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         KC_LCTL,KC_LGUI, KC_LALT,                  LT(MISC, KC_SPC),                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  XXXXXXX,XXXXXXX,XXXXXXX,  XXXXXXX,XXXXXXX),
+         _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24,           _______,_______,_______,                                   \
+         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,KC_SLCT,   C(W),  KC_UP,_______,_______,_______,_______,KC_BSPC, KC_DEL,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
+         _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_HOME,KC_PGDN,KC_PGUP,_______,_______,_______,        _______,                             _______,_______,_______,         \
+         KC_LSFT,_______,   C(Y),   C(X),   C(C),   C(V), KC_SPC, KC_END,_______,C(PGUP),C(PGDN),_______,        _______,           _______,          _______,_______,_______,_______, \
+         _______,_______,_______,               LT(MISC, KC_SPC),                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE1), // toggle enable mouse layer (4)
-    [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET),  // tap to print [
-    [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET),  // tap to print ]
-    [3] = ACTION_FUNCTION_TAP(LALT_CURLY),  // tap to print {
-    [4] = ACTION_FUNCTION_TAP(RALT_CURLY),  // tap to print }
-    [5] = ACTION_LAYER_TAP_TOGGLE(PROG1), // toggle programming layer 1 (1)
+    [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE1),      // tap-toggle mouse layer (4)
+    [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET),   // tap to print [
+    [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET),   // tap to print ]
+    [3] = ACTION_FUNCTION_TAP(LALT_CURLY),      // tap to print {
+    [4] = ACTION_FUNCTION_TAP(RALT_CURLY),      // tap to print }
+    [5] = ACTION_LAYER_TAP_TOGGLE(PROG1),       // tap-toggle programming layer 1
     [6] = ACTION_LAYER_SET_CLEAR(DEFAULT),
     [7] = ACTION_FUNCTION_TAP(CTRL_CLICK),
-    [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN),  // tap to print (
-    [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN),  // tap to print )
+    [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN),     // tap to print (
+    [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN),     // tap to print )
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
@@ -126,7 +132,22 @@ void matrix_init_user(void) {
 }
 
 void matrix_scan_user(void) {
+    uint8_t layer;
+    layer = biton32(layer_state);
 
+    if (current_layer_global != layer) {
+        current_layer_global = layer;
+
+        // unset CAPSLOCK and SCROLL LOCK LEDs
+        led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_CAPS_LOCK));
+        led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_SCROLL_LOCK));
+        // set SCROLL LOCK LED when the mouse layer is active, CAPS LOCK when PROG layer is active
+        if (layer == MOUSE1 || layer == MOUSE2) {
+          led_set_kb(host_keyboard_leds() | (1<<USB_LED_SCROLL_LOCK));
+        } else if (layer == PROG1 || layer == PROG2) {
+          led_set_kb(host_keyboard_leds() | (1<<USB_LED_CAPS_LOCK));
+        }
+    }
 }
 
 void led_set_user(uint8_t usb_led) {
@@ -209,6 +230,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
                  keycode == KC_BSLS ||
                  keycode == KC_GRV
             )) {
+              // LSFT is the modifier for this layer, so we set LSFT for every key to get the expected behavior
               if (record->event.pressed) {
                   register_mods(MOD_LSFT);
               } else {
diff --git a/keyboards/kitten_paw/keymaps/ickerwx/readme.md b/keyboards/kitten_paw/keymaps/ickerwx/readme.md
new file mode 100644
index 0000000000..0d23be4eac
--- /dev/null
+++ b/keyboards/kitten_paw/keymaps/ickerwx/readme.md
@@ -0,0 +1,18 @@
+# My personal keymap for the Kitten Paw controller
+
+This keymap only works correctly when you have your OS configured with a German keymap. Use the keymap however you like. It's most likely a living thing that will never be quite finished.
+
+## Description of the layers
+Layer 0 (DEFAULT) works just like you would expect a keyboard to work, mostly, except:
+Caps Lock switches to the mouse layer, RGUI and APP are switches to the programming layer and media layer.
+Mouse and programming layer switches can be held or double-tapped to lock.
+Holding space switches to the MISC layer where I currently accumulate useful shortcuts.
+Tapping left and right Shift, Ctrl and Alt will send (), [] and {} respectively.
+
+Layers 1 and 2 (PROG1 and PROG2) emulate the US layout while still using a German OS keymap setting. I was annoyed of having to change the OS settings every time I wanted to use the US layout for coding, so I made these layers to behave just like the US layout even though the OS still uses German. The shift keys were a bit tricky, I had to use them as MO(PROG2) switches, so to get the actual expected behavior I enable LSFT for almost every keypress on PROG2 in ```process_record_user```. Since the shift keys are MO() function keys, they do not print () at the moment, which sucks. I'm working on it.
+
+Layer 3 (MEDIA) just has a couple of media keys on it, mainly around the cursor keys and nav key cluster.
+
+Layers 4 and 5 (MOUSE1 and MOUSE2) are mouse layers. Move the cursor using ESDF, scroll using HJKL, Space for left click, N and M for right and middle click. There's more, look at the keymap.
+
+Layer 6 is a layer I don't have a good name for, so I call it MISC. You'll find cursor keys at ESDF, other navigation keys around the HJKL cluster and F12 to F24 on the F-keys. For now.
\ No newline at end of file
diff --git a/keyboards/kitten_paw/kitten_paw.c b/keyboards/kitten_paw/kitten_paw.c
index 8713baf433..92f64b06b4 100644
--- a/keyboards/kitten_paw/kitten_paw.c
+++ b/keyboards/kitten_paw/kitten_paw.c
@@ -4,7 +4,6 @@ void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
-    matrix_init_quantum();
 	matrix_init_user();
 }
 
@@ -12,7 +11,6 @@ void matrix_scan_kb(void) {
 	// put your looping keyboard code here
 	// runs every cycle (a lot)
 
-    matrix_scan_quantum();
     matrix_scan_user();
 }
 
@@ -25,6 +23,21 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
+    CONFIG_LED_IO;
+    CONFIG_LED_IO;
+    print_dec(usb_led);
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+        USB_LED_CAPS_LOCK_ON;
+    else
+        USB_LED_CAPS_LOCK_OFF;
+
+    if (usb_led & (1<<USB_LED_NUM_LOCK))
+        USB_LED_NUM_LOCK_ON;
+    else
+        USB_LED_NUM_LOCK_OFF;
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+        USB_LED_SCROLL_LOCK_ON;
+    else
+        USB_LED_SCROLL_LOCK_OFF;
 	led_set_user(usb_led);
 }
diff --git a/keyboards/kitten_paw/kitten_paw.h b/keyboards/kitten_paw/kitten_paw.h
index a6c1d27de7..189b721b93 100644
--- a/keyboards/kitten_paw/kitten_paw.h
+++ b/keyboards/kitten_paw/kitten_paw.h
@@ -3,6 +3,17 @@
 
 #include "quantum.h"
 
+#define CONFIG_LED_IO \
+  DDRB |= (1<<7); \
+  DDRC |= (1<<5) | (1<<6);
+
+#define USB_LED_CAPS_LOCK_ON    PORTC &= ~(1<<6)
+#define USB_LED_CAPS_LOCK_OFF   PORTC |=  (1<<6)
+#define USB_LED_NUM_LOCK_ON     PORTB &= ~(1<<7)
+#define USB_LED_NUM_LOCK_OFF    PORTB |=  (1<<7)
+#define USB_LED_SCROLL_LOCK_ON  PORTC &= ~(1<<5)
+#define USB_LED_SCROLL_LOCK_OFF PORTC |=  (1<<5)
+
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
diff --git a/keyboards/kitten_paw/led.c b/keyboards/kitten_paw/led.c
deleted file mode 100644
index a1bf057c4c..0000000000
--- a/keyboards/kitten_paw/led.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
-  Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-  This program is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "stdint.h"
-#include "led.h"
-
-/* LED pin configuration
- *
- * Scroll Lock  PC5
- * Caps Lock    PC6
- * Num Lock     PB7
- *
- */
-void led_set(uint8_t usb_led) {
-  DDRB |= (1<<7);
-  DDRC |= (1<<5) | (1<<6);
-  
-  if (usb_led & (1<<USB_LED_CAPS_LOCK))
-    PORTC &= ~(1<<6);
-  else
-    PORTC |=  (1<<6);
-  
-  if (usb_led & (1<<USB_LED_NUM_LOCK))
-    PORTB &= ~(1<<7);
-  else
-    PORTB |=  (1<<7);
-  
-  if (usb_led & (1<<USB_LED_SCROLL_LOCK))
-    PORTC &= ~(1<<5);
-  else
-    PORTC |=  (1<<5);
-}
diff --git a/keyboards/kitten_paw/matrix.c b/keyboards/kitten_paw/matrix.c
index 46875293fc..d436ad56ca 100644
--- a/keyboards/kitten_paw/matrix.c
+++ b/keyboards/kitten_paw/matrix.c
@@ -67,6 +67,7 @@ void matrix_init(void) {
     matrix[i] = 0;
     matrix_debouncing[i] = 0;
   }
+  matrix_init_quantum();
 }
 
 uint8_t matrix_scan(void) {
@@ -94,7 +95,7 @@ uint8_t matrix_scan(void) {
       }
     }
   }
-  
+  matrix_scan_quantum();
   return 1;
 }
 
-- 
cgit v1.2.3


From 34eeea787c8a1c45d5d35221e164e347b7ed65ee Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Thu, 25 Aug 2016 08:16:18 -0500
Subject: Fixed naming of Analog pins to differentiate them from DIO pins used
 by Quantum Matrix

---
 keyboards/lets_split/pro_micro.h | 64 ++++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 32 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h
index 09e219b7b1..f9e7ed75d9 100644
--- a/keyboards/lets_split/pro_micro.h
+++ b/keyboards/lets_split/pro_micro.h
@@ -111,18 +111,18 @@ static const uint8_t SCK  = 15;
 
 // Mapping of analog pins as digital I/O
 // A6-A11 share with digital pins
-static const uint8_t A0 = 18;
-static const uint8_t A1 = 19;
-static const uint8_t A2 = 20;
-static const uint8_t A3 = 21;
-static const uint8_t A4 = 22;
-static const uint8_t A5 = 23;
-static const uint8_t A6 = 24;   // D4
-static const uint8_t A7 = 25;   // D6
-static const uint8_t A8 = 26;   // D8
-static const uint8_t A9 = 27;   // D9
-static const uint8_t A10 = 28;  // D10
-static const uint8_t A11 = 29;  // D12
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
 
 #define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
 #define digitalPinToPCICRbit(p) 0
@@ -220,26 +220,26 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
     PC, // D5 - PC6
     PD, // D6 - PD7
     PE, // D7 - PE6
-    
+
     PB, // D8 - PB4
     PB, // D9 - PB5
     PB, // D10 - PB6
     PB, // D11 - PB7
     PD, // D12 - PD6
     PC, // D13 - PC7
-    
+
     PB, // D14 - MISO - PB3
     PB, // D15 - SCK - PB1
     PB, // D16 - MOSI - PB2
     PB, // D17 - SS - PB0
-    
+
     PF, // D18 - A0 - PF7
     PF, // D19 - A1 - PF6
     PF, // D20 - A2 - PF5
     PF, // D21 - A3 - PF4
     PF, // D22 - A4 - PF1
     PF, // D23 - A5 - PF0
-    
+
     PD, // D24 - PD5
     PD, // D25 / D6 - A7 - PD7
     PB, // D26 / D8 - A8 - PB4
@@ -257,26 +257,26 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
     _BV(6), // D5 - PC6
     _BV(7), // D6 - PD7
     _BV(6), // D7 - PE6
-    
+
     _BV(4), // D8 - PB4
     _BV(5), // D9 - PB5
     _BV(6), // D10 - PB6
     _BV(7), // D11 - PB7
     _BV(6), // D12 - PD6
     _BV(7), // D13 - PC7
-    
+
     _BV(3), // D14 - MISO - PB3
     _BV(1), // D15 - SCK - PB1
     _BV(2), // D16 - MOSI - PB2
     _BV(0), // D17 - SS - PB0
-    
+
     _BV(7), // D18 - A0 - PF7
     _BV(6), // D19 - A1 - PF6
     _BV(5), // D20 - A2 - PF5
     _BV(4), // D21 - A3 - PF4
     _BV(1), // D22 - A4 - PF1
     _BV(0), // D23 - A5 - PF0
-    
+
     _BV(5), // D24 - PD5
     _BV(7), // D25 / D6 - A7 - PD7
     _BV(4), // D26 / D8 - A8 - PB4
@@ -286,24 +286,24 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
 };
 
 const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,   
+    NOT_ON_TIMER,
     NOT_ON_TIMER,
     NOT_ON_TIMER,
     TIMER0B,        /* 3 */
     NOT_ON_TIMER,
     TIMER3A,        /* 5 */
     TIMER4D,        /* 6 */
-    NOT_ON_TIMER,   
-    
-    NOT_ON_TIMER,   
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
     TIMER1A,        /* 9 */
     TIMER1B,        /* 10 */
     TIMER0A,        /* 11 */
-    
-    NOT_ON_TIMER,   
+
+    NOT_ON_TIMER,
     TIMER4A,        /* 13 */
-    
-    NOT_ON_TIMER,   
+
+    NOT_ON_TIMER,
     NOT_ON_TIMER,
     NOT_ON_TIMER,
     NOT_ON_TIMER,
@@ -324,11 +324,11 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
 
 const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
     7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6    
-    5,  // A2               PF5                 ADC5    
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
     4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1    
-    0,  // A5               PF0                 ADC0    
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
     8,  // A6       D4      PD4                 ADC8
     10, // A7       D6      PD7                 ADC10
     11, // A8       D8      PB4                 ADC11
-- 
cgit v1.2.3


From 8d0aed39d11efaf51a0831e78b5641b4b5686197 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Thu, 25 Aug 2016 20:39:55 +0200
Subject: - Added capslock led for KC60 keyboard (based on gitbug.com/jpec/kc60
 works)

---
 keyboards/kc60/Makefile |  3 ++-
 keyboards/kc60/led.c    | 31 +++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)
 create mode 100644 keyboards/kc60/led.c

(limited to 'keyboards')

diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile
index b00a488b91..0d17d32dac 100644
--- a/keyboards/kc60/Makefile
+++ b/keyboards/kc60/Makefile
@@ -1,4 +1,5 @@
-
+# project specific files
+SRC = led.c
 
 # MCU name
 #MCU = at90usb1287
diff --git a/keyboards/kc60/led.c b/keyboards/kc60/led.c
new file mode 100644
index 0000000000..50659d7247
--- /dev/null
+++ b/keyboards/kc60/led.c
@@ -0,0 +1,31 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<2);
+        PORTB &= ~(1<<2);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<2);
+        PORTB &= ~(1<<2);
+    }
+}
\ No newline at end of file
-- 
cgit v1.2.3


From fb8365a378b9393164d31b1dea42c95a9543f761 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Thu, 25 Aug 2016 23:28:10 +0300
Subject: Split vision_division into Makefile/rules.mk

---
 keyboards/vision_division/Makefile | 77 +-------------------------------------
 keyboards/vision_division/rules.mk | 70 ++++++++++++++++++++++++++++++++++
 2 files changed, 72 insertions(+), 75 deletions(-)
 create mode 100644 keyboards/vision_division/rules.mk

(limited to 'keyboards')

diff --git a/keyboards/vision_division/Makefile b/keyboards/vision_division/Makefile
index 4f3130c483..4e2a6f00fd 100644
--- a/keyboards/vision_division/Makefile
+++ b/keyboards/vision_division/Makefile
@@ -1,76 +1,3 @@
-
-
-# MCU name
-MCU = at90usb1286
-# MCU = at90usb1287
-# MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=1024
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-
+endif
\ No newline at end of file
diff --git a/keyboards/vision_division/rules.mk b/keyboards/vision_division/rules.mk
new file mode 100644
index 0000000000..063fba29bd
--- /dev/null
+++ b/keyboards/vision_division/rules.mk
@@ -0,0 +1,70 @@
+
+
+# MCU name
+MCU = at90usb1286
+# MCU = at90usb1287
+# MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=1024
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file
-- 
cgit v1.2.3


From 6cfdd077b5bcdcfe8b390e4c07965eaf6c081c76 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Fri, 26 Aug 2016 00:05:58 +0300
Subject: Fix bad merge

Led should have been added to KC60, not GH60
---
 keyboards/gh60/rules.mk | 3 ---
 keyboards/kc60/rules.mk | 3 ++-
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/gh60/rules.mk b/keyboards/gh60/rules.mk
index b3c5c7271c..aba680e45b 100644
--- a/keyboards/gh60/rules.mk
+++ b/keyboards/gh60/rules.mk
@@ -1,6 +1,3 @@
-# project specific files
-SRC = led.c
-
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk
index 4efd6f9887..a935ed19ee 100644
--- a/keyboards/kc60/rules.mk
+++ b/keyboards/kc60/rules.mk
@@ -1,4 +1,5 @@
-
+# project specific files
+SRC = led.c
 
 # MCU name
 #MCU = at90usb1287
-- 
cgit v1.2.3


From 3f0e1b3a8ea2e8013a77a8ce948d2f69bbdcd869 Mon Sep 17 00:00:00 2001
From: zs <baloghzsof@gmail.com>
Date: Thu, 25 Aug 2016 20:56:15 +0200
Subject: Correct typo in kc60 workman-dead keymap

and rename README.md to readme.md
---
 keyboards/kc60/keymaps/workman-dead/README.md | 17 -----------------
 keyboards/kc60/keymaps/workman-dead/keymap.c  |  8 ++++----
 keyboards/kc60/keymaps/workman-dead/readme.md | 17 +++++++++++++++++
 3 files changed, 21 insertions(+), 21 deletions(-)
 delete mode 100644 keyboards/kc60/keymaps/workman-dead/README.md
 create mode 100644 keyboards/kc60/keymaps/workman-dead/readme.md

(limited to 'keyboards')

diff --git a/keyboards/kc60/keymaps/workman-dead/README.md b/keyboards/kc60/keymaps/workman-dead/README.md
deleted file mode 100644
index f1fcdc9606..0000000000
--- a/keyboards/kc60/keymaps/workman-dead/README.md
+++ /dev/null
@@ -1,17 +0,0 @@
-# Workman dead with spacefn (kc60 @ QMK)
-
-## Layout reference
-![workman dead with spacefn](./kc60-wm-dead.png)
-
-## Build
-
-To build this keymap, simply run `make KEYMAP=workman-dead`.
-
-## Notes
-
-* the default layout is `workman` (try it out, it's awesome!), but it can be changed to `qwerty` with the `rebel` key (the function layer won't change though)
-* `comma` acts as a dead key, that means tapping/holding it will activate the **oneshot** `dead key` layer (marked red in the reference)
-* hold `space` to access the `function` layer (marked blue in the reference)
-* hold `tab` to activate the mouse layer
-* the `function` layer contains mostly osx specific shortcuts
-* on the right side of the bottom row `alt` and `super` are switched compared to a standard layout
diff --git a/keyboards/kc60/keymaps/workman-dead/keymap.c b/keyboards/kc60/keymaps/workman-dead/keymap.c
index 9786e37d8c..9e3b9bb656 100644
--- a/keyboards/kc60/keymaps/workman-dead/keymap.c
+++ b/keyboards/kc60/keymaps/workman-dead/keymap.c
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TABM,          KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \
   KC_LCTL,          KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    KC_QUOT, _______, KC_ENT,  \
   KC_LSFT, _______, KC_Z,    KC_X,    KC_M,    KC_C,    KC_V,    KC_K,    KC_L,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW),
 
 // QWERTY
 /*
@@ -77,7 +77,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TABM,          KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
   KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, _______, KC_ENT,  \
   KC_LSFT, _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, KC_DOWN),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFWM),
 
 // dead key layer
 /*
@@ -98,7 +98,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   XXXXXXX,          KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT,   KC_DLR,  KC_UNDS, KC_LBRC, KC_RBRC, KC_EXLM, KC_TILD, KC_CIRC, _______, \
   _______,          KC_HASH, KC_LPRN, KC_EQL,  KC_0,    KC_LCBR, KC_RCBR, KC_1,    KC_ASTR, KC_RPRN, KC_MINS, KC_GRV,  _______, KC_CENT, \
   _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_PIPE, KC_BSLS, KC_2,    DK_REL,  KC_4,    KC_5,             _______, _______, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_COMS,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, _______),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_COMS,          _______, KC_RALT, KC_RGUI, KC_RCTL, _______),
 
 // function layer
 /*
@@ -119,7 +119,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_ESC,           KC_CMDQ, KC_CMDD, KC_CSTB, KC_C_TB, _______, _______, KC_PGDN, KC_UP,   KC_PGUP, _______, _______, _______, KC_INS,  \
   KC_LSFT,          KC_CMDA, KC_CMDS, KC_C_LF, KC_C_RT, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_END,  _______, KC_BSPC, \
   KC_LSFT, _______, KC_CMDZ, KC_CMDX, _______, KC_CMDC, KC_CMDV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______,          _______, _______, \
-  KC_LCTL, KC_LALT, KC_LGUI,                   KC_TRNS,          KC_NO,   KC_RALT, KC_RGUI, KC_RCTL, RESET),
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_TRNS,          _______, KC_RALT, KC_RGUI, KC_RCTL, RESET),
 
 // mouse layer
 /*
diff --git a/keyboards/kc60/keymaps/workman-dead/readme.md b/keyboards/kc60/keymaps/workman-dead/readme.md
new file mode 100644
index 0000000000..f1fcdc9606
--- /dev/null
+++ b/keyboards/kc60/keymaps/workman-dead/readme.md
@@ -0,0 +1,17 @@
+# Workman dead with spacefn (kc60 @ QMK)
+
+## Layout reference
+![workman dead with spacefn](./kc60-wm-dead.png)
+
+## Build
+
+To build this keymap, simply run `make KEYMAP=workman-dead`.
+
+## Notes
+
+* the default layout is `workman` (try it out, it's awesome!), but it can be changed to `qwerty` with the `rebel` key (the function layer won't change though)
+* `comma` acts as a dead key, that means tapping/holding it will activate the **oneshot** `dead key` layer (marked red in the reference)
+* hold `space` to access the `function` layer (marked blue in the reference)
+* hold `tab` to activate the mouse layer
+* the `function` layer contains mostly osx specific shortcuts
+* on the right side of the bottom row `alt` and `super` are switched compared to a standard layout
-- 
cgit v1.2.3


From ff0e0ee4595cb6d9cfa5a742c58b8f7705d9a3f3 Mon Sep 17 00:00:00 2001
From: JeeBak Kim <jeebak.kim@gmail.com>
Date: Fri, 26 Aug 2016 14:48:03 -0700
Subject: [tv44] Add "jeebak" keymap folder as a copy of the "default" folder

---
 keyboards/tv44/keymaps/jeebak/Makefile  | 21 +++++++
 keyboards/tv44/keymaps/jeebak/config.h  |  8 +++
 keyboards/tv44/keymaps/jeebak/keymap.c  | 97 +++++++++++++++++++++++++++++++++
 keyboards/tv44/keymaps/jeebak/readme.md |  1 +
 4 files changed, 127 insertions(+)
 create mode 100644 keyboards/tv44/keymaps/jeebak/Makefile
 create mode 100644 keyboards/tv44/keymaps/jeebak/config.h
 create mode 100644 keyboards/tv44/keymaps/jeebak/keymap.c
 create mode 100644 keyboards/tv44/keymaps/jeebak/readme.md

(limited to 'keyboards')

diff --git a/keyboards/tv44/keymaps/jeebak/Makefile b/keyboards/tv44/keymaps/jeebak/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/tv44/keymaps/jeebak/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/jeebak/config.h b/keyboards/tv44/keymaps/jeebak/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/tv44/keymaps/jeebak/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/jeebak/keymap.c b/keyboards/tv44/keymaps/jeebak/keymap.c
new file mode 100644
index 0000000000..f3f989f2d1
--- /dev/null
+++ b/keyboards/tv44/keymaps/jeebak/keymap.c
@@ -0,0 +1,97 @@
+#include "tv44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+#define _L3 5
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = { /* Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_DV] = { /* Dvorak */
+    {KC_TAB,  KC_SLSH, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_CM] = { /* Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L2] = { /* LAYER 2 */
+    {_______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______ },
+    {KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______ },
+    {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L3] = { /* LAYER 3 */
+    {_______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______ },
+    {KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______ },
+    {KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______ },
+    {_______, KC_LSFT, KC_B,    KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_C,    _______, _______, XXXXXXX, _______ }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/tv44/keymaps/jeebak/readme.md b/keyboards/tv44/keymaps/jeebak/readme.md
new file mode 100644
index 0000000000..ac84c08cfa
--- /dev/null
+++ b/keyboards/tv44/keymaps/jeebak/readme.md
@@ -0,0 +1 @@
+# The default keymap for tv44
\ No newline at end of file
-- 
cgit v1.2.3


From 5fe883e74b7f8a1265c2069d16e8dcbd25fab18b Mon Sep 17 00:00:00 2001
From: JeeBak Kim <jeebak.kim@gmail.com>
Date: Fri, 26 Aug 2016 15:05:51 -0700
Subject: [tv44] Port jeebak's planck keymap to tv44

---
 keyboards/tv44/keymaps/jeebak/config.h  |  17 +-
 keyboards/tv44/keymaps/jeebak/keymap.c  | 460 +++++++++++++++++++++++++++-----
 keyboards/tv44/keymaps/jeebak/readme.md | 130 ++++++++-
 3 files changed, 538 insertions(+), 69 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/tv44/keymaps/jeebak/config.h b/keyboards/tv44/keymaps/jeebak/config.h
index df06a26206..a59ef2b70a 100644
--- a/keyboards/tv44/keymaps/jeebak/config.h
+++ b/keyboards/tv44/keymaps/jeebak/config.h
@@ -3,6 +3,19 @@
 
 #include "../../config.h"
 
-// place overrides here
+/**
+ *TV44 keymap definition macro
+ */
+#define KEYMAP_TV44( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, \
+    K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, \
+    K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, \
+    K37,   K38,   K39,     K40,     K41,     K42,   K43,   K44  \
+) { \
+    { K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K10,   K11,   K12, }, \
+    { K13,   K14,   K15,   K16,   K17,   K18,   K19,   K20,   K21,   K22,   K23,   K24, }, \
+    { K25,   K26,   K27,   K28,   K29,   K30,   K31,   K32,   K33,   K34,   K35,   K36, }, \
+    { K37,   K38,   K39,   K40, KC_NO, KC_NO,  KC_NO,  K41,   K42,   K43, KC_NO,   K44  }  \
+}
 
-#endif
\ No newline at end of file
+#endif
diff --git a/keyboards/tv44/keymaps/jeebak/keymap.c b/keyboards/tv44/keymaps/jeebak/keymap.c
index f3f989f2d1..1bb1015c36 100644
--- a/keyboards/tv44/keymaps/jeebak/keymap.c
+++ b/keyboards/tv44/keymaps/jeebak/keymap.c
@@ -8,65 +8,281 @@ extern keymap_config_t keymap_config;
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _TOUCHCURSOR 6
+#define _MOUSECURSOR 7
+#define _ADJUST 16
 
-#define _QW 0
-#define _DV 1
-#define _CM 2
-#define _L1 3
-#define _L2 4
-#define _L3 5
+// Keycodes
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
 
-// Macro name shortcuts
-#define QWERTY M(_QW)
-#define DVORAK M(_DV)
-#define COLEMAK M(_CM)
+enum macro_keycodes {
+  KC_ALT_TAB,
+  KC_CMD_TAB,
+  KC_CTL_TAB,
+  KC_CMD_SLSH,
+  KC_AG_FIND,
+  KC_AG_AGAIN,
+  KC_AG_UNDO,
+  KC_AG_CUT,
+  KC_AG_COPY,
+  KC_AG_PASTE,
+  KC_AG_DESK_L,
+  KC_AG_DESK_R,
+  KC_AG_TAB_C,
+  KC_AG_TAB_N,
+  KC_AG_TAB_R,
+};
 
 // Fillers to make layering more clear
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
 
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper
+#define GUI_SEM     GUI_T(KC_SCLN)              // Tap for Semicolon, hold for GUI
+#define ALT_QUO     ALT_T(KC_QUOT)              // Tap for Quote, hold for Alt
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_TC       LT(_TOUCHCURSOR, KC_SPC)    // L-ayer T-ap T-ouch C-ursor
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define ALT_TAB     M(KC_ALT_TAB)               // Macro for Alt-Tab
+#define CMD_TAB     M(KC_CMD_TAB)               // Macro for Cmd-Tab
+#define CTL_TAB     M(KC_CTL_TAB)               // Macro for Ctl-Tab
+#define CMD_SLSH    M(KC_CMD_SLSH)              // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility)
+#define AG_FIND     M(KC_AG_FIND)               // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings
+#define AG_AGAIN    M(KC_AG_AGAIN)
+#define AG_UNDO     M(KC_AG_UNDO)
+#define AG_CUT      M(KC_AG_CUT)
+#define AG_COPY     M(KC_AG_COPY)
+#define AG_PASTE    M(KC_AG_PASTE)
+#define AG_D_L      M(KC_AG_DESK_L)             // For Virtual Desktop Switching: Left, and
+#define AG_D_R      M(KC_AG_DESK_R)             //                                Right
+#define AG_T_C      M(KC_AG_TAB_C)              // For Chrome, etc. Tab Close,
+#define AG_T_N      M(KC_AG_TAB_N)              //                  Tab New, and
+#define AG_T_R      M(KC_AG_TAB_R)              //                  Tab Reopen Closed
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QW] = { /* Qwerty */
-    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
-    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
-    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
-  },
-  [_DV] = { /* Dvorak */
-    {KC_TAB,  KC_SLSH, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
-    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
-    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
-    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
-  },
-  [_CM] = { /* Colemak */
-    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
-    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1) },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
-    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
-  },
-  [_L1] = { /* LAYER 1 */
-    {KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL  },
-    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
-    {_______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
-    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
-  },
-  [_L2] = { /* LAYER 2 */
-    {_______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______ },
-    {KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT  },
-    {_______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______ },
-    {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
-  },
-  [_L3] = { /* LAYER 3 */
-    {_______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______ },
-    {KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______ },
-    {KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______ },
-    {_______, KC_LSFT, KC_B,    KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_C,    _______, _______, XXXXXXX, _______ }
-  }
-};
 
-const uint16_t PROGMEM fn_actions[] = {
+/* Qwerty
+ *
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   Bksp      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * | Ctrl/Esc |   A  |   S  | MC/D |   F  |   G  |   H  |   J  |   K  |   L  |GUI/; |   Alt/"    |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   Shift   |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   Alt   |   GUI   |  Lower  |    TC/Space    |   TC/Space     |  Raise  |   Vol+  |  Play   |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+[_QWERTY] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    HPR_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    CTL_ESC ,   KC_A, KC_S,LT_MC(KC_D),    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, GUI_SEM,    ALT_QUO     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  ,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_LALT   ,   KC_LGUI     ,   LOWER ,      LT_TC     ,      LT_TC      ,  RAISE  ,     KC_VOLU     ,    KC_MPLY   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* Colemak
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |Hyper/Tab|   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  |   Bksp      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * | Ctrl/Esc |   A  |   R  | MC/S |   T  |   D  |   H  |   N  |   E  |   I  |   O  |    "       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | Shift     |   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   Alt   |   GUI   |  Lower  |    TC/Space    |   TC/Space     |  Raise  |   Vol+  |  Play   |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+[_COLEMAK] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    HPR_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN,    KC_BSPC      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    CTL_ESC ,   KC_A, KC_R,LT_MC(KC_S),    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  ,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_LALT   ,   KC_LGUI     ,   LOWER ,      LT_TC     ,      LT_TC      ,  RAISE  ,     KC_VOLU     ,    KC_MPLY   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* Dvorak
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |Hyper/Tab|   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |   Bksp      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * | Ctrl/Esc |   A  |   O  | MC/E |   U  |   I  |   D  |   H  |   T  |   N  |   S  |    /       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | Shift     |   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   Alt   |   GUI   |  Lower  |    TC/Space    |   TC/Space     |  Raise  |   Vol+  |  Play   |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+[_DVORAK] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    HPR_TAB,KC_QUOT, KC_COMM,  KC_DOT,    KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    CTL_ESC ,   KC_A,    KC_O,LT_MC(KC_E), KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  , KC_SCLN,   KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_LALT   ,   KC_LGUI     ,   LOWER ,      LT_TC     ,      LT_TC      ,  RAISE  ,     KC_VOLU     ,    KC_MPLY   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* Lower
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   Bksp      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * |   [      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |   "|"      |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   ]       |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   -  |   =  |   [  |   ]  |    \      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |  Brite  |         |         |                |                |         |   Vol-  |   Mute  |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+[_LOWER] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    KC_TILD,KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,    KC_BSPC      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    KC_LBRC ,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR,    KC_PIPE     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_RBRC  ,  KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC,    KC_BSLS    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    BACKLIT   ,    _______    , _______ ,     _______    ,     _______     , _______ ,     KC_VOLD     ,    KC_MUTE   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* Raise
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   Bksp      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * |   $      |   4  |   5  |   6  |   .  |   +  |   .  |   4  |   5  |   6  |   *  |   "|"      |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   =       |   7  |   8  |   9  |   0  |   -  |   .  |   1  |   2  |   3  |   /  |    \      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |  Brite  |         |         |                |                |         |   Vol-  |   Mute  |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+[_RAISE] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    KC_0   ,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    KC_DLR  ,   KC_4,    KC_5,    KC_6,  KC_DOT, KC_PLUS,  KC_DOT,    KC_4,    KC_5,    KC_6, KC_ASTR,    KC_PIPE     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_EQL   ,   KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_DOT,    KC_1,    KC_2,    KC_3, KC_SLSH,    KC_BSLS    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    BACKLIT   ,    _______    , _______ ,     _______    ,     _______     , _______ ,     KC_VOLD     ,    KC_MUTE   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * | AltTab  |CmdTab|CtlTab| GUI  |Shift |  ~   |Insert| Home |  Up  | End  | Bksp |             |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * |          | Alt  |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|  Desk_R    |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           | Undo | Cut  | Copy |Paste |  `   | PgDn | Del  |Tab_N |Tab_R |iTerm2|           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |         |         |         |                |                |         |         |         |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ *
+ * The KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND, and KC_AGAIN keycodes don't
+ * seem to work on Mac. Presumably they'll work under Windows.
+ */
 
+[_TOUCHCURSOR] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    ALT_TAB,CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD,  KC_INS, KC_HOME,   KC_UP,  KC_END, KC_BSPC,    _______      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    _______ ,KC_LALT,  KC_SPC,  AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT,  AG_D_L,    AG_D_R      ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,AG_UNDO,  AG_CUT, AG_COPY,AG_PASTE,  KC_GRV, KC_PGDN,  KC_DEL,  AG_T_N,  AG_T_R,CMD_SLSH,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______   ,    _______    , _______ ,     _______    ,     _______     , _______ ,     _______     ,    _______   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* Mouse Layer
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |         |      |ACCL0 |      |      |      |      |WHL_L |  Up  |WHL_R | BTN2 |             |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * |          |ACCL2 | BTN2 |      | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 |   BTN5     |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           |      |      |      | BTN3 |      |WHL_Dn| BTN1 |      |      | BTN3 |           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |         |         |         |                |                |         |         |         |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+
+[_MOUSECURSOR] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    _______,_______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2,    _______      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    _______ ,KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4,    KC_BTN5     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,_______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______   ,    _______    , _______ ,     _______    ,     _______     , _______ ,     _______     ,    _______   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* Plover layer (http://opensteno.org)
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |      #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |     #       |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * |         |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |     D       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | TogOut    |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |    Z      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * | Exit    |    A    |    O    |                |                |    E    |    U    |         |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+
+[_PLOVER] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    KC_1   ,   KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,     KC_1        ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    XXXXXXX ,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    XXXXXXX  ,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,    KC_QUOT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    EXT_PLV   ,     KC_C      ,   KC_V  ,     XXXXXXX    ,     XXXXXXX     ,   KC_N  ,      KC_M       ,    XXXXXXX   ),
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
+
+/* Adjust (Lower + Raise)
+ * ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+ * |         |      |      |      |      |      |      |      |      |      |      |    Del      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+ * |          |      |      |      |      |AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|            |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           |      |      |      |      |     |       |      |      |      |      |           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |         |         |         |                |                |         |         |  Reset  |
+ *  `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+ */
+[_ADJUST] = KEYMAP_TV44(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
+    _______,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     KC_DEL      ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
+    _______ ,_______, _______, _______, _______, AG_NORM, AG_SWAP,  QWERTY, COLEMAK,  DVORAK,  PLOVER,    _______     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______   ,    _______    , _______ ,     _______    ,     _______     , _______ ,     _______     ,    RESET     )
+/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
 };
 
 void persistant_default_layer_set(uint16_t default_layer) {
@@ -74,24 +290,136 @@ void persistant_default_layer_set(uint16_t default_layer) {
   default_layer_set(default_layer);
 }
 
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+/*
+ * Macro definition
+ */
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
-      switch(id) {
-        case _DV:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_DV);
-          }
-          break;
-        case _QW:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_QW);
-          }
-          break;
-        case _CM:
-          if (record->event.pressed) {
-            persistant_default_layer_set(1UL<<_CM);
-          }
-          break;
-      }
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    bool use_cmd = true;    // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc.
+    // Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in:
+    // quantum/quantum.c
+    if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) {
+      use_cmd = false;      // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc.
+    }
+
+    switch (id) {
+      case KC_ALT_TAB:
+        if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT),  D(TAB), END ) : MACRO( U(TAB), END )); }
+        else        { return (record->event.pressed ? MACRO( D(LGUI),  D(TAB), END ) : MACRO( U(TAB), END )); }
+      case KC_CMD_TAB:
+        if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI),  D(TAB), END ) : MACRO( U(TAB), END )); }
+        else        { return (record->event.pressed ? MACRO( D(LALT),  D(TAB), END ) : MACRO( U(TAB), END )); }
+
+      case KC_CTL_TAB:
+        return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END ));
+      case KC_CMD_SLSH:
+        return (record->event.pressed ? MACRO( D(LGUI),  D(SLSH),END ) : MACRO( U(SLSH),END ));
+
+      case KC_AG_FIND:
+        return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END );
+      case KC_AG_AGAIN:
+        return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END );
+      case KC_AG_UNDO:
+        return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END );
+      case KC_AG_CUT:
+        return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END );
+      case KC_AG_COPY:
+        return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END );
+      case KC_AG_PASTE:
+        return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END );
+
+      case KC_AG_DESK_L:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END );
+      case KC_AG_DESK_R:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END );
+
+      case KC_AG_TAB_C:
+        return use_cmd ? MACRODOWN( D(LGUI),            T(W), END ) : MACRODOWN( D(LCTRL),            T(W), END );
+      case KC_AG_TAB_N:
+        return use_cmd ? MACRODOWN( D(LGUI),            T(T), END ) : MACRODOWN( D(LCTRL),            T(T), END );
+      case KC_AG_TAB_R:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END );
+    }
+
     return MACRO_NONE;
-};
+}
diff --git a/keyboards/tv44/keymaps/jeebak/readme.md b/keyboards/tv44/keymaps/jeebak/readme.md
index ac84c08cfa..43d20958a6 100644
--- a/keyboards/tv44/keymaps/jeebak/readme.md
+++ b/keyboards/tv44/keymaps/jeebak/readme.md
@@ -1 +1,129 @@
-# The default keymap for tv44
\ No newline at end of file
+jeebak's TV44 layout
+=======================
+NOTE: This is a port of jeebak's planck layout, for tv44.
+
+This WIP keymap attempts to minimize fingers straying away from the home row.
+To aid in this endeavor, when additional modifyer keys to switch layers are
+needed, they will be mapped to home row keys. The `keymap.c` file will contain
+the exact changes. The diagrams in this README shows the highlights of the
+changes from the default mappings.
+
+I also decided to change all calls to `persistant_default_layer_set()` to
+`default_layer_set()` since this is my personal perference.
+
+## Macros
+```
+#define ALT_TAB     M(KC_ALT_TAB)
+```
+
+## Base Layers (Qwerty/Colemak/Dvorak)
+These base layers are mostly the same as the default mappings. The interesting
+changes are shown below.
+
+- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held,
+- `GUI/;` as `;` and `GUI`,
+- `Alt/"` as `"` and `Alt`,
+- `Sft/Ent` as `Enter` and `Shift`, and
+- `Hyper/Tab` as `Tab` and `Hyper`
+
+A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped.
+The arrow keys, which have been moved to the
+[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been
+replaced with the Media keys as shown. The `MC/kc` key activates the
+`MouseCursor` layer when held, and emits the corresponding `kc` for its layer,
+when tapped.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+  |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   Bksp      |
+  |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+  | Ctrl/Esc |   A  |   S  | MC/D |   F  |   G  |   H  |   J  |   K  |   L  |GUI/; |   Alt/"    |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   Shift   |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |   Alt   |   GUI   |  Lower  |    TC/Space    |   TC/Space     |  Raise  |   Vol+  |  Play   |
+   `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+```
+
+## Lower Layer (Symbols and Function Keys)
+The symbols and functions keys are essentially the same as the default mapping.
+The most notable changes are that the symbol keys from the `RAISE` layer have
+been moved here. The remaining Media keys replace those that are now on the
+base layers. The `BACKLIT` key has also been moved here.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+  |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   Bksp      |
+  |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+  |   [      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |   "|"      |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   ]       |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   -  |   =  |   [  |   ]  |    \      |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |  Brite  |         |         |                |                |         |   Vol-  |   Mute  |
+   `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+```
+
+## Raise Layer (Numbers and Arithmetic Operators)
+All of the numbers and arithmetic operators are available on this layer. Some
+keys are duplicated for the convenience of their positions. The `0` and `$`
+keys at the far left are for quick access to beginning and end of line in vim.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+  |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   Bksp      |
+  |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+  |   $      |   4  |   5  |   6  |   .  |   +  |   .  |   4  |   5  |   6  |   *  |   "|"      |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   =       |   7  |   8  |   9  |   0  |   -  |   .  |   1  |   2  |   3  |   /  |    \      |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |  Brite  |         |         |                |                |         |   Vol-  |   Mute  |
+   `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+```
+
+## TouchCursor layer plus personal customizations
+[TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key
+as the modifier, with the `IJKL` home row keys representing the inverted-T of
+the arrow keys. All of the default TouchCursor keymappings for the right hand
+are represented below. My personalizations include all of the keys shown for
+the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key
+from the base layers) readily accessible from the home row allows quick word
+jumps and highlighting when used in conjunction with the arrow keys. The
+`Alt-Tab` macro is not only useful under Windows, but also under Mac when used
+with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch).
+The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in
+this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN`
+keycodes do not seem to work. There are macros in place that'll "automatically"
+choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`,
+etc.) depending on which layout you've currently selected (`AG_NORM` or
+`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I
+use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and
+`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as
+Google Chrome.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+  | AltTab  |CmdTab|CtlTab| GUI  |Shift |  ~   |Insert| Home |  Up  | End  | Bksp |             |
+  |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+  |          | Alt  |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|  Desk_R    |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |           | Undo | Cut  | Copy |Paste |  `   | PgDn | Del  |Tab_N |Tab_R |iTerm2|           |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |         |         |         |                |                |         |         |         |
+   `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+```
+
+## Mouse Layer
+The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer.
+The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the
+mouse from the `doc/keycode.txt` file are represented, and logically located,
+IMHO. The left and right click buttons are duplicated; on the right hand side,
+for a quick click here and there, and again on the left hand side for when the
+buttons need to be held for dragging things or highlighting text, thus allowing
+the right hand to be free to use the up/down/left/right actions.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
+  |         |      |ACCL0 |      |      |      |      |WHL_L |  Up  |WHL_R | BTN2 |             |
+  |---------`------`------`------`------`------`------`------`------`------`------`-------------|
+  |          |ACCL2 | BTN2 |      | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 |   BTN5     |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |           |      |      |      | BTN3 |      |WHL_Dn| BTN1 |      |      | BTN3 |           |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |         |         |         |                |                |         |         |         |
+   `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
+```
-- 
cgit v1.2.3


From a5b1af4999345239df5086351b52a5b4d2daa97e Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sat, 27 Aug 2016 18:40:50 +0300
Subject: Normalize line endings

---
 .../chibios_test/boards/GENERIC_STM32_F103/board.c |   98 +-
 .../chibios_test/boards/GENERIC_STM32_F103/board.h |  332 +++----
 .../boards/GENERIC_STM32_F103/board.mk             |   10 +-
 keyboards/chibios_test/ld/MKL26Z64.ld              |  210 ++--
 .../ld/STM32F103x8_stm32duino_bootloader.ld        |  176 ++--
 keyboards/chibios_test/stm32_f072_onekey/mcuconf.h |  342 +++----
 keyboards/chibios_test/stm32_f103_onekey/mcuconf.h |  418 ++++----
 keyboards/chibios_test/teensy_lc_onekey/chconf.h   | 1048 ++++++++++----------
 keyboards/chibios_test/teensy_lc_onekey/halconf.h  |  374 +++----
 keyboards/chibios_test/teensy_lc_onekey/mcuconf.h  |  110 +-
 keyboards/gh60/Makefile                            |  148 +--
 keyboards/gh60/config.h                            |  322 +++---
 keyboards/gh60/gh60.c                              |   50 +-
 keyboards/gh60/gh60.h                              |  148 +--
 keyboards/gh60/keymaps/robotmaxtron/Makefile       |  224 ++---
 keyboards/gh60/keymaps/robotmaxtron/config.h       |  380 +++----
 keyboards/gh60/pinout.txt                          |   34 +-
 keyboards/gh60/readme.md                           |  120 +--
 keyboards/infinity_chibios/chconf.h                | 1048 ++++++++++----------
 keyboards/infinity_chibios/halconf.h               |  706 ++++++-------
 keyboards/infinity_chibios/mcuconf.h               |  110 +-
 21 files changed, 3204 insertions(+), 3204 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
index 31319ef575..2809c9d184 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
@@ -1,49 +1,49 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
-  stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
index 7253e77826..b31d74307b 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
@@ -1,166 +1,166 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a Generic STM32F103 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F103
-#define BOARD_NAME              "Generic STM32F103x board"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK            32768
-#define STM32_HSECLK            8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments
- */
-
-/* on-board */
-
-#define GPIOC_LED               13
-#define GPIOD_OSC_IN            0
-#define GPIOD_OSC_OUT           1
-
-/* In case your board has a "USB enable" hardware
-   controlled by a pin, define it here. (It could be just
-   a 1.5k resistor connected to D+ line.)
-*/
-/*
-#define GPIOB_USB_DISC          10
-*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- *   0 - Analog input.
- *   1 - Push Pull output 10MHz.
- *   2 - Push Pull output 2MHz.
- *   3 - Push Pull output 50MHz.
- *   4 - Digital input.
- *   5 - Open Drain output 10MHz.
- *   6 - Open Drain output 2MHz.
- *   7 - Open Drain output 50MHz.
- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
- *   9 - Alternate Push Pull output 10MHz.
- *   A - Alternate Push Pull output 2MHz.
- *   B - Alternate Push Pull output 50MHz.
- *   C - Reserved.
- *   D - Alternate Open Drain output 10MHz.
- *   E - Alternate Open Drain output 2MHz.
- *   F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2  - Alternate output  (USART2 TX).
- * PA3  - Normal input      (USART2 RX).
- * PA9  - Alternate output  (USART1 TX).
- * PA10 - Normal input      (USART1 RX).
- */
-#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB10    - Push Pull output  (USB switch).
- */
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC13    - Push Pull output  (LED).
- */
-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0  - Normal input (XTAL).
- * PD1  - Normal input (XTAL).
- */
-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-/* The point is that most of the generic STM32F103* boards
-   have a 1.5k resistor connected on one end to the D+ line
-   and on the other end to some pin. Or even a slightly more
-   complicated "USB enable" circuit, controlled by a pin.
-   That should go here.
-
-   However on some boards (e.g. one that I have), there's no
-   such hardware. In which case it's better to not do anything.
-*/
-/*
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-/*
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOC_LED               13
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
index d692c0ee46..48e0e51fe6 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
@@ -1,5 +1,5 @@
-# List of all the board related files.
-BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
-
-# Required include directories
-BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
+# List of all the board related files.
+BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld
index fb141f888c..c4ca8b874c 100644
--- a/keyboards/chibios_test/ld/MKL26Z64.ld
+++ b/keyboards/chibios_test/ld/MKL26Z64.ld
@@ -1,105 +1,105 @@
-/*
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
- *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * KL26Z64 memory setup.
- */
-MEMORY
-{
-  flash0   : org = 0x00000000, len = 0x100
-  flash1   : org = 0x00000400, len = 0x10
-  flash2   : org = 0x00000410, len = 62k - 0x410
-  flash3   : org = 0x0000F800, len = 2k
-  flash4   : org = 0x00000000, len = 0
-  flash5   : org = 0x00000000, len = 0
-  flash6   : org = 0x00000000, len = 0
-  flash7   : org = 0x00000000, len = 0
-  ram0     : org = 0x1FFFF800, len = 8k
-  ram1     : org = 0x00000000, len = 0
-  ram2     : org = 0x00000000, len = 0
-  ram3     : org = 0x00000000, len = 0
-  ram4     : org = 0x00000000, len = 0
-  ram5     : org = 0x00000000, len = 0
-  ram6     : org = 0x00000000, len = 0
-  ram7     : org = 0x00000000, len = 0
-}
-
-/* Flash region for the configuration bytes.*/
-SECTIONS
-{
-  .cfmprotect : ALIGN(4) SUBALIGN(4)
-  {
-    KEEP(*(.cfmconfig))
-  } > flash1
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash2);
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash2);
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash2);
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash2);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash2);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-__eeprom_workarea_start__ = ORIGIN(flash3);
-__eeprom_workarea_size__  = LENGTH(flash3);
-__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
index 00613328ed..f9bfe9c005 100644
--- a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
+++ b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
@@ -1,88 +1,88 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * ST32F103xB memory setup for use with the maplemini bootloader.
- * You will have to
- * 	#define CORTEX_VTOR_INIT 0x5000
- * in your projects chconf.h
- */
-MEMORY
-{
-    flash0  : org = 0x08002000, len = 128k - 0x2000
-    flash1  : org = 0x00000000, len = 0
-    flash2  : org = 0x00000000, len = 0
-    flash3  : org = 0x00000000, len = 0
-    flash4  : org = 0x00000000, len = 0
-    flash5  : org = 0x00000000, len = 0
-    flash6  : org = 0x00000000, len = 0
-    flash7  : org = 0x00000000, len = 0
-    ram0    : org = 0x20000000, len = 20k
-    ram1    : org = 0x00000000, len = 0
-    ram2    : org = 0x00000000, len = 0
-    ram3    : org = 0x00000000, len = 0
-    ram4    : org = 0x00000000, len = 0
-    ram5    : org = 0x00000000, len = 0
-    ram6    : org = 0x00000000, len = 0
-    ram7    : org = 0x00000000, len = 0
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash0);
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash0);
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash0);
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash0);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash0);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 128k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
index 3d877aaa2b..faca3defdf 100644
--- a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
+++ b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
@@ -1,171 +1,171 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_HSI14_ENABLED                 TRUE
-#define STM32_HSI48_ENABLED                 FALSE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   FALSE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE                  1
-#define STM32_PLLMUL_VALUE                  12
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE                          STM32_PPRE_DIV1
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
-#define STM32_USBSW                         STM32_USBSW_HSI48
-#define STM32_CECSW                         STM32_CECSW_HSI
-#define STM32_I2C1SW                        STM32_I2C1SW_HSI
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM14                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         2
-#define STM32_GPT_TIM2_IRQ_PRIORITY         2
-#define STM32_GPT_TIM3_IRQ_PRIORITY         2
-#define STM32_GPT_TIM14_IRQ_PRIORITY        2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         3
-#define STM32_I2C_I2C2_IRQ_PRIORITY         3
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         3
-#define STM32_ICU_TIM2_IRQ_PRIORITY         3
-#define STM32_ICU_TIM3_IRQ_PRIORITY         3
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         3
-#define STM32_PWM_TIM2_IRQ_PRIORITY         3
-#define STM32_PWM_TIM3_IRQ_PRIORITY         3
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        3
-#define STM32_SERIAL_USART2_PRIORITY        3
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         2
-#define STM32_SPI_SPI2_IRQ_PRIORITY         2
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               2
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      3
-#define STM32_UART_USART2_IRQ_PRIORITY      3
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
-
-#endif /* _MCUCONF_H_ */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
index 626332a6aa..276829216e 100644
--- a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
+++ b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
@@ -1,209 +1,209 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define STM32F103_MCUCONF
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   FALSE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE                  9
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED            TRUE
-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC1_IRQ_PRIORITY         6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY         11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM8                  FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM8_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM8                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM8_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM8                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM8_IRQ_PRIORITY         7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY              15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART3             FALSE
-#define STM32_SERIAL_USE_UART4              FALSE
-#define STM32_SERIAL_USE_UART5              FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
-#define STM32_SERIAL_UART4_PRIORITY         12
-#define STM32_SERIAL_UART5_PRIORITY         12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
-
-#endif /* _MCUCONF_H_ */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
index cb36996c33..3294ac7eee 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/chconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
@@ -1,524 +1,524 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 1000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 20
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                TRUE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               TRUE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           TRUE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 TRUE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
index b1d2cd5502..0436408b09 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/halconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
@@ -1,187 +1,187 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
index c636590197..2764e88989 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
@@ -1,55 +1,55 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define KL2x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#if 1
-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
-#define KINETIS_PLLCLK_FREQUENCY    96000000UL
-#define KINETIS_SYSCLK_FREQUENCY    48000000UL
-#endif
-
-#if 0
-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
-#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */
-#endif
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0              TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0                  TRUE
-/* Need to redefine this, since the default is for K20x */
-/* This is for Teensy LC; you should comment it out (or change to 5)
- * for Teensy 3.x */
-#define KINETIS_USB_USB0_IRQ_PRIORITY         2
-
-#endif /* _MCUCONF_H_ */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#if 1
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#endif
+
+#if 0
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                  TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY         2
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile
index 39a9cc0ae1..075b77256f 100644
--- a/keyboards/gh60/Makefile
+++ b/keyboards/gh60/Makefile
@@ -1,74 +1,74 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-ifndef QUANTUM_DIR
-	include ../../Makefile
-endif
-
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES			# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h
index 4813c4e786..97753bc069 100644
--- a/keyboards/gh60/config.h
+++ b/keyboards/gh60/config.h
@@ -1,161 +1,161 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
-#define PRODUCT_ID   0x6060
-#define DEVICE_VER   0x0001
-#define MANUFACTURER    geekhack
-#define PRODUCT         GH60
-#define DESCRIPTION     t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-// Rev A
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
-// Rev B/C
-   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1     H
-//#define MAGIC_KEY_HELP2     SLASH
-//#define MAGIC_KEY_DEBUG     D
-//#define MAGIC_KEY_DEBUG_MATRIX  X
-//#define MAGIC_KEY_DEBUG_KBD   K
-//#define MAGIC_KEY_DEBUG_MOUSE  M
-//#define MAGIC_KEY_VERSION    V
-//#define MAGIC_KEY_STATUS     S
-//#define MAGIC_KEY_CONSOLE    C
-//#define MAGIC_KEY_LAYER0_ALT1  ESC
-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
-//#define MAGIC_KEY_LAYER0     0
-//#define MAGIC_KEY_LAYER1     1
-//#define MAGIC_KEY_LAYER2     2
-//#define MAGIC_KEY_LAYER3     3
-//#define MAGIC_KEY_LAYER4     4
-//#define MAGIC_KEY_LAYER5     5
-//#define MAGIC_KEY_LAYER6     6
-//#define MAGIC_KEY_LAYER7     7
-//#define MAGIC_KEY_LAYER8     8
-//#define MAGIC_KEY_LAYER9     9
-//#define MAGIC_KEY_BOOTLOADER   PAUSE
-//#define MAGIC_KEY_LOCK      CAPS
-//#define MAGIC_KEY_EEPROM     E
-//#define MAGIC_KEY_NKRO      N
-//#define MAGIC_KEY_SLEEP_LED   Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/gh60/gh60.c b/keyboards/gh60/gh60.c
index 255d87de99..f5a158e12f 100644
--- a/keyboards/gh60/gh60.c
+++ b/keyboards/gh60/gh60.c
@@ -1,25 +1,25 @@
-#include "gh60.h"
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-	
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-		gh60_caps_led_on();
-		} else {
-		gh60_caps_led_off(); 
-    }
-	
-    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-		// gh60_esc_led_on();
-		// } else {
-		// gh60_esc_led_off(); 
-    // }
-	
-    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-		// gh60_fn_led_on();
-		// } else {
-		// gh60_fn_led_off(); 	
-    // }
-
-	led_set_user(usb_led);	
-}
+#include "gh60.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		gh60_caps_led_on();
+		} else {
+		gh60_caps_led_off(); 
+    }
+	
+    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+		// gh60_esc_led_on();
+		// } else {
+		// gh60_esc_led_off(); 
+    // }
+	
+    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+		// gh60_fn_led_on();
+		// } else {
+		// gh60_fn_led_off(); 	
+    // }
+
+	led_set_user(usb_led);	
+}
diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h
index ca30562a44..82624b6148 100644
--- a/keyboards/gh60/gh60.h
+++ b/keyboards/gh60/gh60.h
@@ -1,74 +1,74 @@
-#ifndef GH60_H
-#define GH60_H
-
-#include "quantum.h"
-#include "led.h"
-
-/* GH60 LEDs 
- *   GPIO pads
- *   0 F7 WASD LEDs
- *   1 F6 ESC LED
- *   2 F5 FN LED
- *   3 F4 POKER Arrow LEDs
- *   B2 Capslock LED
- *   B0 not connected
- */
-inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }
-
-inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
-
-/* GH60 keymap definition macro
- * K2C, K31 and  K3C are extra keys for ISO
- */
-#define KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
-    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D }  \
-}
-
-/* ANSI valiant. No extra keys for ISO */
-#define KEYMAP_ANSI( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
-) KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
-    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO,  K3D, \
-    K40, K41, K42,           K45,                NO,  K4A, K4B, K4C, K4D  \
-)
-
-#define KEYMAP_HHKB( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \
-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
-) KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
-    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
-    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
-)
-
-#endif
+#ifndef GH60_H
+#define GH60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* GH60 LEDs 
+ *   GPIO pads
+ *   0 F7 WASD LEDs
+ *   1 F6 ESC LED
+ *   2 F5 FN LED
+ *   3 F4 POKER Arrow LEDs
+ *   B2 Capslock LED
+ *   B0 not connected
+ */
+inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }
+
+inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+
+/* GH60 keymap definition macro
+ * K2C, K31 and  K3C are extra keys for ISO
+ */
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D }  \
+}
+
+/* ANSI valiant. No extra keys for ISO */
+#define KEYMAP_ANSI( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
+    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO,  K3D, \
+    K40, K41, K42,           K45,                NO,  K4A, K4B, K4C, K4D  \
+)
+
+#define KEYMAP_HHKB( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
+    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
+)
+
+#endif
diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile
index 2e69aee298..c73cf11417 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/Makefile
+++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile
@@ -1,112 +1,112 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
-
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES		# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+
diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h
index 8272875ed0..6a29e6b8c2 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/config.h
+++ b/keyboards/gh60/keymaps/robotmaxtron/config.h
@@ -1,190 +1,190 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
-#define PRODUCT_ID   0x6060
-#define DEVICE_VER   0x0001
-#define MANUFACTURER    geekhack
-#define PRODUCT         GH60
-#define DESCRIPTION     t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-// Rev A
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
-// Rev B/C
-   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1     H
-//#define MAGIC_KEY_HELP2     SLASH
-//#define MAGIC_KEY_DEBUG     D
-//#define MAGIC_KEY_DEBUG_MATRIX  X
-//#define MAGIC_KEY_DEBUG_KBD   K
-//#define MAGIC_KEY_DEBUG_MOUSE  M
-//#define MAGIC_KEY_VERSION    V
-//#define MAGIC_KEY_STATUS     S
-//#define MAGIC_KEY_CONSOLE    C
-//#define MAGIC_KEY_LAYER0_ALT1  ESC
-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
-//#define MAGIC_KEY_LAYER0     0
-//#define MAGIC_KEY_LAYER1     1
-//#define MAGIC_KEY_LAYER2     2
-//#define MAGIC_KEY_LAYER3     3
-//#define MAGIC_KEY_LAYER4     4
-//#define MAGIC_KEY_LAYER5     5
-//#define MAGIC_KEY_LAYER6     6
-//#define MAGIC_KEY_LAYER7     7
-//#define MAGIC_KEY_LAYER8     8
-//#define MAGIC_KEY_LAYER9     9
-//#define MAGIC_KEY_BOOTLOADER   PAUSE
-//#define MAGIC_KEY_LOCK      CAPS
-//#define MAGIC_KEY_EEPROM     E
-//#define MAGIC_KEY_NKRO      N
-//#define MAGIC_KEY_SLEEP_LED   Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * RGB Underglow
- * These settings are for the F4 by default:
- * 
- *
- * #define ws2812_PORTREG  PORTF
- * #define ws2812_DDRREG   DDRF
- * #define ws2812_pin PF4
- * #define RGBLED_NUM 14     // Number of LEDs
- * #define RGBLIGHT_HUE_STEP 10
- * #define RGBLIGHT_SAT_STEP 17
- * #define RGBLIGHT_VAL_STEP 17
- *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 
- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
-*/
-
-/* Deprecated code below
-#define ws2812_PORTREG  PORTF 
-#define ws2812_DDRREG   DDRF
-#define ws2812_pin PF4
-*/ 
-#define RGB_DI_PIN F4
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 8         // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * RGB Underglow
+ * These settings are for the F4 by default:
+ * 
+ *
+ * #define ws2812_PORTREG  PORTF
+ * #define ws2812_DDRREG   DDRF
+ * #define ws2812_pin PF4
+ * #define RGBLED_NUM 14     // Number of LEDs
+ * #define RGBLIGHT_HUE_STEP 10
+ * #define RGBLIGHT_SAT_STEP 17
+ * #define RGBLIGHT_VAL_STEP 17
+ *
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 
+ * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
+*/
+
+/* Deprecated code below
+#define ws2812_PORTREG  PORTF 
+#define ws2812_DDRREG   DDRF
+#define ws2812_pin PF4
+*/ 
+#define RGB_DI_PIN F4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8         // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
diff --git a/keyboards/gh60/pinout.txt b/keyboards/gh60/pinout.txt
index 3787f938e7..e9bf1983a5 100644
--- a/keyboards/gh60/pinout.txt
+++ b/keyboards/gh60/pinout.txt
@@ -1,18 +1,18 @@
-    /* Column pin configuration
-    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
-    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
-    */
-     
-    /* Row pin configuration
-    * row: 0   1   2   3   4
-    * pin: D0  D1  D2  D3  D5
-    */
-     
-    GPIO pads
-    0 F7 WASD LEDs
-    1 F6 ESC LED
-    2 F5 FN LED
-    3 F4 POKER Arrow LEDs
-     
-    B2 Capslock LED
+    /* Column pin configuration
+    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
+    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
+    */
+     
+    /* Row pin configuration
+    * row: 0   1   2   3   4
+    * pin: D0  D1  D2  D3  D5
+    */
+     
+    GPIO pads
+    0 F7 WASD LEDs
+    1 F6 ESC LED
+    2 F5 FN LED
+    3 F4 POKER Arrow LEDs
+     
+    B2 Capslock LED
     B0 not connected
\ No newline at end of file
diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md
index 92302d507c..ad042483d8 100644
--- a/keyboards/gh60/readme.md
+++ b/keyboards/gh60/readme.md
@@ -1,60 +1,60 @@
-## gh60 Rev C keyboard firmware
-
-![gh60 Rev C PCB](gh60revc.jpg)
-
-    /* Column pin configuration
-    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
-    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
-    */
-     
-    /* Row pin configuration
-    * row: 0   1   2   3   4
-    * pin: D0  D1  D2  D3  D5
-    */
-     
-    GPIO pads
-    0 F7 WASD LEDs
-    1 F6 ESC LED
-    2 F5 FN LED
-    3 F4 POKER Arrow LEDs
-     
-    B2 Capslock LED
-    B0 not connected
-	
-Functions to controls LED clusters
-	
-    gh60_caps_led_on()
-    gh60_poker_leds_on()
-    gh60_fn_led_on()
-    gh60_esc_led_on()
-    gh60_wasd_leds_on()
-    
-    gh60_caps_led_off()
-    gh60_poker_leds_off()
-    gh60_fn_led_off()
-    gh60_esc_led_off()
-    gh60_wasd_leds_off()
-	
-======================
-
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/readme.md).
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-To build with the default keymap, simply run `make`.
-
-### Other Keymaps
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
-```
-$ make KEYMAP=[default|jack|<name>]
-```
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
+## gh60 Rev C keyboard firmware
+
+![gh60 Rev C PCB](gh60revc.jpg)
+
+    /* Column pin configuration
+    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
+    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
+    */
+     
+    /* Row pin configuration
+    * row: 0   1   2   3   4
+    * pin: D0  D1  D2  D3  D5
+    */
+     
+    GPIO pads
+    0 F7 WASD LEDs
+    1 F6 ESC LED
+    2 F5 FN LED
+    3 F4 POKER Arrow LEDs
+     
+    B2 Capslock LED
+    B0 not connected
+	
+Functions to controls LED clusters
+	
+    gh60_caps_led_on()
+    gh60_poker_leds_on()
+    gh60_fn_led_on()
+    gh60_esc_led_on()
+    gh60_wasd_leds_on()
+    
+    gh60_caps_led_off()
+    gh60_poker_leds_off()
+    gh60_fn_led_off()
+    gh60_esc_led_off()
+    gh60_wasd_leds_off()
+	
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/infinity_chibios/chconf.h b/keyboards/infinity_chibios/chconf.h
index b886c383bb..43c845739a 100644
--- a/keyboards/infinity_chibios/chconf.h
+++ b/keyboards/infinity_chibios/chconf.h
@@ -1,524 +1,524 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 1000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 20
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                FALSE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 FALSE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/halconf.h b/keyboards/infinity_chibios/halconf.h
index 53538de149..46b37a4f46 100644
--- a/keyboards/infinity_chibios/halconf.h
+++ b/keyboards/infinity_chibios/halconf.h
@@ -1,353 +1,353 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          TRUE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/mcuconf.h b/keyboards/infinity_chibios/mcuconf.h
index 66b6ce25de..f453304b75 100644
--- a/keyboards/infinity_chibios/mcuconf.h
+++ b/keyboards/infinity_chibios/mcuconf.h
@@ -1,55 +1,55 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define K20x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-
-/* Select the MCU clocking mode below by enabling the appropriate block. */
-
-#define KINETIS_NO_INIT             FALSE
-
-/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
-#define KINETIS_CLKDIV1_OUTDIV1     1
-#define KINETIS_CLKDIV1_OUTDIV2     1
-#define KINETIS_CLKDIV1_OUTDIV4     2
-#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
-#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0            TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0                TRUE
-/* Need to redefine this, since the default is for K20x */
-/* This is for Teensy LC; you should comment it out (or change to 5)
- * for Teensy 3.x */
-#define KINETIS_USB_USB0_IRQ_PRIORITY       2
-
-#endif /* _MCUCONF_H_ */
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1
+#define KINETIS_CLKDIV1_OUTDIV2     1
+#define KINETIS_CLKDIV1_OUTDIV4     2
+#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY       2
+
+#endif /* _MCUCONF_H_ */
-- 
cgit v1.2.3


From 8ab9c5c55a0f90266b1c70e40fc034065ad027de Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sat, 27 Aug 2016 23:14:27 +0300
Subject: Rename infinity_chibios to infinity60, and add readme

---
 keyboards/infinity60/MEMO.txt                      | 385 +++++++++++++++
 keyboards/infinity60/Makefile                      |   3 +
 keyboards/infinity60/bootloader_defs.h             |   1 +
 keyboards/infinity60/chconf.h                      | 524 +++++++++++++++++++++
 keyboards/infinity60/config.h                      |  77 +++
 keyboards/infinity60/halconf.h                     | 353 ++++++++++++++
 keyboards/infinity60/infinity60.c                  |  17 +
 keyboards/infinity60/infinity60.h                  |  66 +++
 keyboards/infinity60/keymaps/default/keymap.c      |  48 ++
 keyboards/infinity60/keymaps/depariel/keymap.c     |  82 ++++
 keyboards/infinity60/keymaps/hasu/keymap.c         | 113 +++++
 keyboards/infinity60/led.c                         |  24 +
 keyboards/infinity60/matrix.c                      | 171 +++++++
 keyboards/infinity60/mcuconf.h                     |  55 +++
 keyboards/infinity60/readme.md                     |  29 ++
 keyboards/infinity60/rules.mk                      |  66 +++
 keyboards/infinity_chibios/MEMO.txt                | 385 ---------------
 keyboards/infinity_chibios/Makefile                |   3 -
 keyboards/infinity_chibios/bootloader_defs.h       |   1 -
 keyboards/infinity_chibios/chconf.h                | 524 ---------------------
 keyboards/infinity_chibios/config.h                |  78 ---
 keyboards/infinity_chibios/halconf.h               | 353 --------------
 keyboards/infinity_chibios/infinity_chibios.c      |  17 -
 keyboards/infinity_chibios/infinity_chibios.h      |  66 ---
 .../infinity_chibios/keymaps/default/keymap.c      |  48 --
 .../infinity_chibios/keymaps/depariel/keymap.c     |  82 ----
 keyboards/infinity_chibios/keymaps/hasu/keymap.c   | 113 -----
 keyboards/infinity_chibios/led.c                   |  24 -
 keyboards/infinity_chibios/matrix.c                | 171 -------
 keyboards/infinity_chibios/mcuconf.h               |  55 ---
 keyboards/infinity_chibios/rules.mk                |  66 ---
 31 files changed, 2014 insertions(+), 1986 deletions(-)
 create mode 100644 keyboards/infinity60/MEMO.txt
 create mode 100644 keyboards/infinity60/Makefile
 create mode 100644 keyboards/infinity60/bootloader_defs.h
 create mode 100644 keyboards/infinity60/chconf.h
 create mode 100644 keyboards/infinity60/config.h
 create mode 100644 keyboards/infinity60/halconf.h
 create mode 100644 keyboards/infinity60/infinity60.c
 create mode 100644 keyboards/infinity60/infinity60.h
 create mode 100644 keyboards/infinity60/keymaps/default/keymap.c
 create mode 100755 keyboards/infinity60/keymaps/depariel/keymap.c
 create mode 100644 keyboards/infinity60/keymaps/hasu/keymap.c
 create mode 100644 keyboards/infinity60/led.c
 create mode 100644 keyboards/infinity60/matrix.c
 create mode 100644 keyboards/infinity60/mcuconf.h
 create mode 100644 keyboards/infinity60/readme.md
 create mode 100644 keyboards/infinity60/rules.mk
 delete mode 100644 keyboards/infinity_chibios/MEMO.txt
 delete mode 100644 keyboards/infinity_chibios/Makefile
 delete mode 100644 keyboards/infinity_chibios/bootloader_defs.h
 delete mode 100644 keyboards/infinity_chibios/chconf.h
 delete mode 100644 keyboards/infinity_chibios/config.h
 delete mode 100644 keyboards/infinity_chibios/halconf.h
 delete mode 100644 keyboards/infinity_chibios/infinity_chibios.c
 delete mode 100644 keyboards/infinity_chibios/infinity_chibios.h
 delete mode 100644 keyboards/infinity_chibios/keymaps/default/keymap.c
 delete mode 100755 keyboards/infinity_chibios/keymaps/depariel/keymap.c
 delete mode 100644 keyboards/infinity_chibios/keymaps/hasu/keymap.c
 delete mode 100644 keyboards/infinity_chibios/led.c
 delete mode 100644 keyboards/infinity_chibios/matrix.c
 delete mode 100644 keyboards/infinity_chibios/mcuconf.h
 delete mode 100644 keyboards/infinity_chibios/rules.mk

(limited to 'keyboards')

diff --git a/keyboards/infinity60/MEMO.txt b/keyboards/infinity60/MEMO.txt
new file mode 100644
index 0000000000..e2886aa002
--- /dev/null
+++ b/keyboards/infinity60/MEMO.txt
@@ -0,0 +1,385 @@
+flabbergast's TMK/ChibiOS port
+==============================
+2015/10/16
+
+
+Build
+-----
+$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
+
+$ cd tmk_keyboard
+$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+or
+$ cd tmk_keyboard/tmk_core/tool/chibios
+$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+
+$ cd tmk_keyboard/keyboard/infinity_chibios
+$ make
+
+
+
+
+Chibios Configuration
+---------------------
+halconf.h: for HAL configuration
+    placed in project directory
+    read in chibios/os/hal/hal.mk
+    included in chibios/os/hal/include/hal.h
+mcuconf.h: for MCU configuration
+    placed in project directory
+    included in halconf.h
+
+
+Chibios Term
+------------
+PAL = Port Abstraction Layer
+    palWritePad
+    palReadPad
+    palSetPad
+    chibios/os/hal/include/pal.h
+
+LLD = Low Level Driver
+
+
+Makefile
+--------
+    #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+    MCU_FAMILY = KINETIS
+    MCU_SERIES = KL2x
+
+    # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+    #   or <this_dir>/ld/
+    MCU_LDSCRIPT = MKL26Z64
+
+    #  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+    MCU_STARTUP = kl2x
+
+    # Board: it should exist either in <chibios>/os/hal/boards/
+    #  or <this_dir>/boards
+    BOARD = PJRC_TEENSY_LC
+
+    MCU  = cortex-m0
+
+    # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+    ARMV = 6
+
+
+halconf.h
+---------
+
+
+mcuconf.h
+---------
+
+
+chconf.h
+--------
+
+
+ld script
+---------
+--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld     2015-10-15 09:08:58.732904304 +0900
++++ ld/MKL26Z64.ld      2015-10-15 08:48:06.430215496 +0900
+@@ -27,7 +27,8 @@
+ {
+   flash0   :  org = 0x00000000,  len = 0xc0
+   flashcfg :  org = 0x00000400,  len = 0x10
+-  flash    :  org = 0x00000410,  len = 64k - 0x410
++  flash    :  org = 0x00000410,  len = 62k - 0x410
++  eeprom_emu : org = 0x0000F800, len = 2k
+   ram      :  org = 0x1FFFF800,  len = 8k
+ }
+
+@@ -35,6 +36,10 @@
+ __ram_size__            = LENGTH(ram);
+ __ram_end__             = __ram_start__ + __ram_size__;
+
++__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
++__eeprom_workarea_size__  = LENGTH(eeprom_emu);
++__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
++
+ SECTIONS
+ {
+   . = 0;
+
+
+
+Configuration/Startup for Infinity 60%
+--------------------------------------
+Configuration:
+
+
+Clock:
+Inifinity   
+    FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
+    Clock dividor:
+    SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
+    SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
+    SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
+    Internal reference clock:
+    MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
+    MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
+    FLL multipilication:
+    MCG_C4[DMX32] = 1
+    MCG_C4[DRST_DRS] = 01   FLL factor 1464 * 32.768kHz = 48MHz
+
+chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
+    k20x_clock_init(): called in __early_init() defined in board.c
+        disable watchdog and configure clock
+
+        configurable macros:
+        KINETIS_NO_INIT: whether init or not
+        KINETIS_MCG_MODE: clock mode   
+            KINETIS_MCG_MODE_FEI
+            KINETIS_MCG_MODE_PEE
+                hal/ports/KINETIS/K20x/hal_lld.h
+            
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
+    PALConfig pal_default_config
+    boardInit()
+    __early_init()
+    macro definitions for board infos, freq and mcu type
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
+
+USB
+
+
+Startup
+-------
+    common/ports/ARMCMx/GCC/crt0_v[67]m.s
+        Reset_Handler: startup code
+    common/ports/ARMCMx/GCC/crt1.c
+        __core_init(): weak
+        __early_init(): weak
+        __late_init(): weak
+        __default_exit(): weak
+            called from Reset_Handler of crt0
+    common/ports/ARMCMx/GCC/vector.c
+    common/ports/ARMCMx/GCC/ld/*.ld
+
+chibios/os/common/ports/ARMCMx/compilers/GCC/
+├── crt0_v6m.s
+├── crt0_v7m.s
+├── crt1.c
+├── ld
+│   ├── MK20DX128BLDR3.ld
+│   ├── MK20DX128BLDR4.ld
+│   ├── MK20DX128.ld
+│   ├── MK20DX256.ld
+│   ├── MKL25Z128.ld
+│   ├── MKL26Z128.ld
+│   ├── MKL26Z64.ld
+│   └── STM32L476xG.ld
+├── mk
+│   ├── startup_k20x5.mk
+│   ├── startup_k20x7.mk
+│   ├── startup_k20x.mk
+│   ├── startup_kl2x.mk
+│   └── startup_stm32l4xx.mk
+├── rules.ld
+├── rules.mk
+└── vectors.c
+
+chibios/os/hal/
+├── boards
+│   ├── FREESCALE_FREEDOM_K20D50M
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── MCHCK_K20
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── PJRC_TEENSY_3
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── PJRC_TEENSY_3_1
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── PJRC_TEENSY_LC
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── readme.txt
+│   ├── simulator
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   └── board.mk
+│   ├── ST_NUCLEO_F030R8
+│   │   ├── board.c
+│   │   ├── board.h
+│   │   ├── board.mk
+│   │   └── cfg
+│   │       └── board.chcfg
+├── hal.mk
+├── include
+│   ├── adc.h
+│   ├── can.h
+│   ├── dac.h
+│   ├── ext.h
+│   ├── gpt.h
+│   ├── hal_channels.h
+│   ├── hal_files.h
+│   ├── hal.h
+│   ├── hal_ioblock.h
+│   ├── hal_mmcsd.h
+│   ├── hal_queues.h
+│   ├── hal_streams.h
+│   ├── i2c.h
+│   ├── i2s.h
+│   ├── icu.h
+│   ├── mac.h
+│   ├── mii.h
+│   ├── mmc_spi.h
+│   ├── pal.h
+│   ├── pwm.h
+│   ├── rtc.h
+│   ├── sdc.h
+│   ├── serial.h
+│   ├── serial_usb.h
+│   ├── spi.h
+│   ├── st.h
+│   ├── uart.h
+│   └── usb.h
+├── lib
+│   └── streams
+│       ├── chprintf.c
+│       ├── chprintf.h
+│       ├── memstreams.c
+│       ├── memstreams.h
+│       ├── nullstreams.c
+│       └── nullstreams.h
+├── osal
+│   ├── nil
+│   │   ├── osal.c
+│   │   ├── osal.h
+│   │   └── osal.mk
+│   ├── os-less
+│   │   └── ARMCMx
+│   │       ├── osal.c
+│   │       ├── osal.h
+│   │       └── osal.mk
+│   └── rt
+│       ├── osal.c
+│       ├── osal.h
+│       └── osal.mk
+├── ports
+│   ├── AVR
+│   ├── common
+│   │   └── ARMCMx
+│   │       ├── mpu.h
+│   │       ├── nvic.c
+│   │       └── nvic.h
+│   ├── KINETIS
+│   │   ├── K20x
+│   │   │   ├── hal_lld.c
+│   │   │   ├── hal_lld.h
+│   │   │   ├── kinetis_registry.h
+│   │   │   ├── platform.dox
+│   │   │   ├── platform.mk
+│   │   │   ├── pwm_lld.c
+│   │   │   ├── pwm_lld.h
+│   │   │   ├── spi_lld.c
+│   │   │   └── spi_lld.h
+│   │   ├── KL2x
+│   │   │   ├── hal_lld.c
+│   │   │   ├── hal_lld.h
+│   │   │   ├── kinetis_registry.h
+│   │   │   ├── platform.mk
+│   │   │   ├── pwm_lld.c
+│   │   │   └── pwm_lld.h
+│   │   ├── LLD
+│   │   │   ├── adc_lld.c
+│   │   │   ├── adc_lld.h
+│   │   │   ├── ext_lld.c
+│   │   │   ├── ext_lld.h
+│   │   │   ├── gpt_lld.c
+│   │   │   ├── gpt_lld.h
+│   │   │   ├── i2c_lld.c
+│   │   │   ├── i2c_lld.h
+│   │   │   ├── pal_lld.c
+│   │   │   ├── pal_lld.h
+│   │   │   ├── serial_lld.c
+│   │   │   ├── serial_lld.h
+│   │   │   ├── st_lld.c
+│   │   │   ├── st_lld.h
+│   │   │   ├── usb_lld.c
+│   │   │   └── usb_lld.h
+│   │   └── README.md
+│   ├── LPC
+│   ├── simulator
+│   └── STM32
+├── src
+│   ├── adc.c
+│   ├── can.c
+│   ├── dac.c
+│   ├── ext.c
+│   ├── gpt.c
+│   ├── hal.c
+│   ├── hal_mmcsd.c
+│   ├── hal_queues.c
+│   ├── i2c.c
+│   ├── i2s.c
+│   ├── icu.c
+│   ├── mac.c
+│   ├── mmc_spi.c
+│   ├── pal.c
+│   ├── pwm.c
+│   ├── rtc.c
+│   ├── sdc.c
+│   ├── serial.c
+│   ├── serial_usb.c
+│   ├── spi.c
+│   ├── st.c
+│   ├── uart.c
+│   └── usb.c
+└── templates
+    ├── adc_lld.c
+    ├── adc_lld.h
+    ├── can_lld.c
+    ├── can_lld.h
+    ├── dac_lld.c
+    ├── dac_lld.h
+    ├── ext_lld.c
+    ├── ext_lld.h
+    ├── gpt_lld.c
+    ├── gpt_lld.h
+    ├── halconf.h
+    ├── hal_lld.c
+    ├── hal_lld.h
+    ├── i2c_lld.c
+    ├── i2c_lld.h
+    ├── i2s_lld.c
+    ├── i2s_lld.h
+    ├── icu_lld.c
+    ├── icu_lld.h
+    ├── mac_lld.c
+    ├── mac_lld.h
+    ├── mcuconf.h
+    ├── osal
+    │   ├── osal.c
+    │   ├── osal.h
+    │   └── osal.mk
+    ├── pal_lld.c
+    ├── pal_lld.h
+    ├── platform.mk
+    ├── pwm_lld.c
+    ├── pwm_lld.h
+    ├── rtc_lld.c
+    ├── rtc_lld.h
+    ├── sdc_lld.c
+    ├── sdc_lld.h
+    ├── serial_lld.c
+    ├── serial_lld.h
+    ├── spi_lld.c
+    ├── spi_lld.h
+    ├── st_lld.c
+    ├── st_lld.h
+    ├── uart_lld.c
+    ├── uart_lld.h
+    ├── usb_lld.c
+    └── usb_lld.h
diff --git a/keyboards/infinity60/Makefile b/keyboards/infinity60/Makefile
new file mode 100644
index 0000000000..4e2a6f00fd
--- /dev/null
+++ b/keyboards/infinity60/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/infinity60/bootloader_defs.h b/keyboards/infinity60/bootloader_defs.h
new file mode 100644
index 0000000000..c67153be60
--- /dev/null
+++ b/keyboards/infinity60/bootloader_defs.h
@@ -0,0 +1 @@
+#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/infinity60/chconf.h b/keyboards/infinity60/chconf.h
new file mode 100644
index 0000000000..43c845739a
--- /dev/null
+++ b/keyboards/infinity60/chconf.h
@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/infinity60/config.h b/keyboards/infinity60/config.h
new file mode 100644
index 0000000000..f8346fe165
--- /dev/null
+++ b/keyboards/infinity60/config.h
@@ -0,0 +1,77 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "Input Club"
+#define USBSTR_MANUFACTURER    'I', '\x00', 'n', '\x00', 'p', '\x00', 'u', '\x00', 't', '\x00', ' ', '\x00', 'C', '\x00', 'l', '\x00', 'u', '\x00', 'b', '\x00'
+#define PRODUCT "Infinity keyboard/QMK"
+#define USBSTR_PRODUCT         'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'Q', '\x00', 'M', '\x00', 'K', '\x00'
+/* key matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 7
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Keymap for Infinity prototype */
+//#define INFINITY_PROTOTYPE
+
+/* Keymap for Infinity 1.1a (first revision with LED support) */
+//#define INFINITY_LED
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/infinity60/halconf.h b/keyboards/infinity60/halconf.h
new file mode 100644
index 0000000000..46b37a4f46
--- /dev/null
+++ b/keyboards/infinity60/halconf.h
@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/infinity60/infinity60.c b/keyboards/infinity60/infinity60.c
new file mode 100644
index 0000000000..e471250feb
--- /dev/null
+++ b/keyboards/infinity60/infinity60.c
@@ -0,0 +1,17 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "infinity60.h"
diff --git a/keyboards/infinity60/infinity60.h b/keyboards/infinity60/infinity60.h
new file mode 100644
index 0000000000..f1ba15e489
--- /dev/null
+++ b/keyboards/infinity60/infinity60.h
@@ -0,0 +1,66 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "quantum.h"
+
+#ifdef INFINITY_PROTOTYPE
+
+/* Infinity prototype */
+#define KEYMAP( \
+    K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \
+    K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \
+    K13, K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, \
+    K54, K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, \
+    K06, K16, K26,           K36,                K46, K56, K66, K76 \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06 }, \
+    { K10, K11, K12, K13, K14, K15, K16 }, \
+    { K20, K21, K22, K23, K24, K25, K26 }, \
+    { K30, K31, K32, K33, K34, K35, K36 }, \
+    { K40, K41, K42, K43, K44, K45, K46 }, \
+    { K50, K51, K52, K53, K54, K55, K56 }, \
+    { K60, K61, K62, K63, K64, K65, K66 }, \
+    { K70, K71, K72, K73, K74, K75, K76 }, \
+    { K80, K81, K82, K83, K84, K85, K86 }  \
+}
+
+#else
+
+/* Infinity production */
+#define KEYMAP( \
+    K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \
+    K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \
+    K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \
+    K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \
+    K16, K26, K36,           K46,                K56, K66, K76, K86 \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06 }, \
+    { K10, K11, K12, K13, K14, K15, K16 }, \
+    { K20, K21, K22, K23, K24, K25, K26 }, \
+    { K30, K31, K32, K33, K34, K35, K36 }, \
+    { K40, K41, K42, K43, K44, K45, K46 }, \
+    { K50, K51, K52, K53, K54, K55, K56 }, \
+    { K60, K61, K62, K63, K64, K65, K66 }, \
+    { K70, K71, K72, K73, K74, K75, K76 }, \
+    { K80, K81, K82, K83, K84, K85, K86 }  \
+}
+
+#endif
+
+#endif
diff --git a/keyboards/infinity60/keymaps/default/keymap.c b/keyboards/infinity60/keymaps/default/keymap.c
new file mode 100644
index 0000000000..4434128579
--- /dev/null
+++ b/keyboards/infinity60/keymaps/default/keymap.c
@@ -0,0 +1,48 @@
+#include "infinity60.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn0|
+     * |-----------------------------------------------------------'
+     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
+     * `-----------------------------------------------------------'
+     */
+    [0] = KEYMAP(
+      KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS, KC_GRV, \
+      KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC, \
+      KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,  \
+      KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,MO(1), \
+      KC_NO,  KC_LGUI,KC_LALT,          KC_SPC,                KC_RALT,KC_RGUI,KC_NO, KC_NO),
+
+    /* Layer 1: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------.
+     * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
+     * |-----------------------------------------------------------|
+     * |      |VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
+     * `-----------------------------------------------------------'
+     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
+     * `-----------------------------------------------------------'
+     */ 
+    [1] = KEYMAP(
+      KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,   \
+      KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS, KC_BSPC,      \
+      KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT,            \
+      KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS,            \
+      KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+};
+
+const uint16_t fn_actions[] = {
+    
+};
+
diff --git a/keyboards/infinity60/keymaps/depariel/keymap.c b/keyboards/infinity60/keymaps/depariel/keymap.c
new file mode 100755
index 0000000000..7412b9b9dd
--- /dev/null
+++ b/keyboards/infinity60/keymaps/depariel/keymap.c
@@ -0,0 +1,82 @@
+#include "infinity60.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Bksp|
+     * |-----------------------------------------------------------|
+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2|
+     * |-----------------------------------------------------------'
+     * |Fn2 |Gui |Alt |         Space           |RAlt|Prv|PlPs|Next|
+     * `-----------------------------------------------------------'
+     */
+    [0] = KEYMAP(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,            KC_BSLS,  KC_GRV, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSPC, \
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, LT(5, KC_ENT),  \
+        KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC, MO(4), \
+        MO(4),   KC_LGUI, KC_LALT,               LT(3, KC_SPC),                 KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
+
+    /* Layer 1: "Toggle" off SpaceFn for League of Legends
+     */
+    [1] = KEYMAP(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS,  KC_GRV, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(4), \
+        MO(4),   KC_LGUI, KC_LALT,                   KC_SPC,                    KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
+           
+    /* Layer 2: "Toggle" off SpaceFn for MapleRoyals
+     */
+    [2] = KEYMAP(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS,  KC_GRV, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_LSFT, \
+        MO(4),   KC_LGUI, KC_LALT,                   KC_SPC,                    KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+
+    /* Layer 3: FN layer 1
+     */ 
+    [3] = KEYMAP(
+        KC_NO,           KC_F1,   KC_F2,   KC_F3,   KC_F4,          KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_NO,   \
+        KC_NO,           KC_BTN1, KC_MS_U, KC_BTN2, LALT(KC_F4),    KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_UP,   KC_NO,   KC_LPRN, KC_RPRN, KC_DEL,      \
+        MO(6),           KC_MS_L, KC_MS_D, KC_MS_R, KC_NO,          KC_END,  KC_PGDN, KC_TILD, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,           \
+        LGUI(KC_SPC),    KC_NO,   KC_NO,   KC_NO,   KC_NO,          KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_CALC, KC_MENU, KC_TRNS, TG(4),           \
+        KC_TRNS,         KC_TRNS, KC_TRNS,                       LT(3, KC_SPC),                KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU),
+    
+    /* Layer 4: FN layer 2
+     */ 
+    [4] = KEYMAP(
+        KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_PMNS, KC_PPLS, KC_PSLS, TG(2),   \
+        KC_CAPS, KC_NO,   KC_UP,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_PSCR, KC_NO,   KC_P7,   KC_P8,   KC_P9,   KC_PAST, KC_BSPC,      \
+        KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_P4,   KC_P5,   KC_P6,   KC_PENT,           \
+        KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_P1,   KC_P2,   KC_P3,   KC_RSFT, MO(4),           \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                   KC_P0,   KC_PDOT, KC_NO,   TG(1)),
+    
+    /* Layer 5: FN layer 3
+     */ 
+    [5] = KEYMAP(
+        KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,            KC_NO,   KC_NO,   \
+        KC_TAB , KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_NO,            KC_TRNS,      \
+        KC_TRNS, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F17,  KC_F18,  KC_F19,  KC_F20,  LT(5, KC_ENT),           \
+        KC_TRNS, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F21,  KC_F22,  KC_F23,  KC_F24,  KC_TRNS, KC_TRNS,           \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                   KC_RALT, KC_NO,   KC_NO,  KC_NO),
+    
+    /* Layer 6: FN layer 4
+     */ 
+    [6] = KEYMAP(
+        KC_NO,                 KC_NO,            KC_NO,          KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   \
+        LCTL(LSFT(KC_TAB)),    KC_NO,            LGUI(KC_UP),    KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,      \
+        MO(6),                 LGUI(KC_LEFT),    LGUI(KC_DOWN),  LGUI(KC_RGHT),    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,       \
+        KC_TRNS,               KC_NO,            KC_NO,          KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_TRNS, KC_TRNS,           \
+        KC_TRNS,               KC_TRNS,          KC_TRNS,                   KC_TRNS,                 KC_TRNS, KC_NO,   KC_NO,   KC_NO),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
diff --git a/keyboards/infinity60/keymaps/hasu/keymap.c b/keyboards/infinity60/keymaps/hasu/keymap.c
new file mode 100644
index 0000000000..d3728869ab
--- /dev/null
+++ b/keyboards/infinity60/keymaps/hasu/keymap.c
@@ -0,0 +1,113 @@
+#include "infinity60.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn0|
+     * |-----------------------------------------------------------'
+     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
+     * `-----------------------------------------------------------'
+     */
+    [0] = KEYMAP(
+        KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,           KC_MINS,KC_EQL, KC_BSLS,KC_GRV, \
+        KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,           KC_LBRC,KC_RBRC,KC_BSPC, \
+        KC_LCTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   LT(3, KC_SCLN), KC_QUOT,MT(KC_RCTL, KC_ENT), \
+        OSM(MOD_LSFT), KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, LT(2, KC_SLSH), KC_RSFT,TG(1), \
+        KC_NO,     KC_LGUI,KC_LALT,         LT(4, KC_SPC),                 MO(4),  KC_RGUI,KC_NO,          KC_NO),
+
+    /* Layer 1: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------.
+     * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
+     * |-----------------------------------------------------------|
+     * |      |VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
+     * `-----------------------------------------------------------'
+     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
+     * `-----------------------------------------------------------'
+     */ 
+    [1] = KEYMAP(
+        KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+        KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP,  KC_TRNS,KC_BSPC, \
+        KC_LCTL,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_ENT, \
+        KC_LSFT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS, \
+        KC_TRNS,KC_LGUI,KC_LALT,          KC_TRNS,                      KC_RALT,KC_RGUI,KC_TRNS,KC_TRNS),
+
+    /* Layer 2: Vi mode[Slash]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd|   |   |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgUlEnd|Fn0|Shift |   |
+     * `-----------------------------------------------------------'
+     *       |Gui|Alt  |          Space        |Alt  |Gui|
+     *       `-------------------------------------------'
+     */
+    [2] = KEYMAP(
+        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,         KC_F11, KC_F12, KC_INS, KC_DEL, \
+        KC_TAB, KC_HOME,KC_PGDN,KC_UP,  KC_PGUP,KC_END, KC_HOME,KC_PGDN,KC_PGUP,KC_END, KC_NO,          KC_NO,  KC_NO,  KC_BSPC, \
+        KC_LCTL,KC_NO,  KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,  KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT,KC_NO,          KC_NO,  KC_ENT, \
+        KC_LSFT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_HOME,KC_PGDN,KC_PGUP,KC_END, LT(2, KC_SLSH), KC_RSFT,KC_TRNS, \
+        KC_TRNS,KC_LGUI,KC_LALT,          KC_SPC,                       KC_RALT,KC_RGUI,KC_TRNS,        KC_TRNS),
+
+    /* Layer 3: Mouse mode(IJKL)[Semicolon]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+     * |-----------------------------------------------------------|
+     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Fn |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
+     * `-----------------------------------------------------------'
+     *      |Gui |Alt  |          Mb1          |Fn   |Fn |
+     *      `--------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    [3] = KEYMAP(
+        KC_GRV,       KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,          KC_F9,          KC_F10,         KC_F11,         KC_F12,        KC_INS, KC_DEL, \
+        LALT(KC_TAB), KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_MS_U,        KC_WH_U,        KC_WH_R,        ALT_T(KC_LEFT), ALT_T(KC_RGHT),LALT(KC_TAB), \
+        KC_LCTL,      KC_ACL0,KC_ACL1,KC_ACL2,KC_ACL2,KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,        KC_MS_R,        LT(3, KC_SCLN), KC_NO,          KC_ENT, \
+        KC_LSFT,      KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT), ALT_T(KC_RGHT), KC_NO,          KC_RSFT,        KC_TRNS, \
+        KC_TRNS,      KC_LGUI,KC_LALT,          KC_BTN1,                      KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS),
+
+    /* Layer 4: Mouse mode(IJKL)[Space]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+     * |-----------------------------------------------------------|
+     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Mb1|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
+     * `-----------------------------------------------------------'
+     *      |Gui |Alt  |          Mb1          |Fn   |Fn |
+     *      `--------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    [4] = KEYMAP(
+        KC_GRV,       KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,         KC_F9,         KC_F10, KC_F11, KC_F12, KC_INS,       KC_DEL, \
+        LALT(KC_TAB), KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_MS_U,       KC_WH_U,       KC_WH_R,KC_BTN4,KC_BTN5,LALT(KC_TAB), \
+        KC_LCTL,      KC_VOLD,KC_VOLU,KC_MUTE,KC_NO,  KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,       KC_MS_R,       KC_BTN1,KC_NO,  KC_ENT, \
+        KC_LSFT,      KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT),ALT_T(KC_RGHT),KC_NO,  KC_RSFT,KC_TRNS, \
+        KC_TRNS,      KC_LGUI,KC_LALT,          KC_TRNS,                      KC_TRNS,       KC_TRNS,       KC_TRNS,KC_TRNS),
+
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t fn_actions[] = {
+
+};
diff --git a/keyboards/infinity60/led.c b/keyboards/infinity60/led.c
new file mode 100644
index 0000000000..aed66c7c03
--- /dev/null
+++ b/keyboards/infinity60/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+}
diff --git a/keyboards/infinity60/matrix.c b/keyboards/infinity60/matrix.c
new file mode 100644
index 0000000000..62c165aa53
--- /dev/null
+++ b/keyboards/infinity60/matrix.c
@@ -0,0 +1,171 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "print.h"
+#include "matrix.h"
+
+
+/*
+ * Infinity Pinusage:
+ * Column pins are input with internal pull-down. Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *  INFINITY PRODUCTION (NO LED)
+ *     col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
+ *     row: { PTB0, PTB1, PTB2, PTB3, PTB16, PTB17, PTC4, PTC5, PTD0 }
+ *  INFINITY PRODUCTION (WITH LED)
+ *     col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
+ *     row: { PTC0, PTC1, PTC2, PTC3, PTC4, PTC5, PTC6, PTC7, PTD0 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+
+void matrix_init(void)
+{
+    /* Column(sense) */
+    palSetPadMode(GPIOD, 1,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 2,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 3,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 4,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 5,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 6,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 7,  PAL_MODE_INPUT_PULLDOWN);
+
+#ifdef INFINITY_LED
+    /* Row(strobe) */
+    palSetPadMode(GPIOC, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 1,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 2,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 3,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 4,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 5,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 6,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 7,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOD, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+#else
+    /* Row(strobe) */
+    palSetPadMode(GPIOB, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 1,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 2,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 3,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 17, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 4,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 5,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOD, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+#endif
+    memset(matrix, 0, MATRIX_ROWS);
+    memset(matrix_debouncing, 0, MATRIX_ROWS);
+}
+
+uint8_t matrix_scan(void)
+{
+    for (int row = 0; row < MATRIX_ROWS; row++) {
+        matrix_row_t data = 0;
+    #ifdef INFINITY_LED
+        // strobe row
+        switch (row) {
+            case 0: palSetPad(GPIOC, 0);    break;
+            case 1: palSetPad(GPIOC, 1);    break;
+            case 2: palSetPad(GPIOC, 2);    break;
+            case 3: palSetPad(GPIOC, 3);    break;
+            case 4: palSetPad(GPIOC, 4);    break;
+            case 5: palSetPad(GPIOC, 5);    break;
+            case 6: palSetPad(GPIOC, 6);    break;
+            case 7: palSetPad(GPIOC, 7);    break;
+            case 8: palSetPad(GPIOD, 0);    break;
+        }
+    #else
+        // strobe row
+        switch (row) {
+            case 0: palSetPad(GPIOB, 0);    break;
+            case 1: palSetPad(GPIOB, 1);    break;
+            case 2: palSetPad(GPIOB, 2);    break;
+            case 3: palSetPad(GPIOB, 3);    break;
+            case 4: palSetPad(GPIOB, 16);   break;
+            case 5: palSetPad(GPIOB, 17);   break;
+            case 6: palSetPad(GPIOC, 4);    break;
+            case 7: palSetPad(GPIOC, 5);    break;
+            case 8: palSetPad(GPIOD, 0);    break;
+        }
+    #endif
+
+        wait_us(1); // need wait to settle pin state
+
+        // read col data
+        data = (palReadPort(GPIOD)>>1);
+    #ifdef INFINITY_LED
+        // un-strobe row
+        switch (row) {
+            case 0: palClearPad(GPIOC, 0);    break;
+            case 1: palClearPad(GPIOC, 1);    break;
+            case 2: palClearPad(GPIOC, 2);    break;
+            case 3: palClearPad(GPIOC, 3);    break;
+            case 4: palClearPad(GPIOC, 4);    break;
+            case 5: palClearPad(GPIOC, 5);    break;
+            case 6: palClearPad(GPIOC, 6);    break;
+            case 7: palClearPad(GPIOC, 7);    break;
+            case 8: palClearPad(GPIOD, 0);    break;
+        }
+    #else
+        // un-strobe row
+        switch (row) {
+            case 0: palClearPad(GPIOB, 0);    break;
+            case 1: palClearPad(GPIOB, 1);    break;
+            case 2: palClearPad(GPIOB, 2);    break;
+            case 3: palClearPad(GPIOB, 3);    break;
+            case 4: palClearPad(GPIOB, 16);   break;
+            case 5: palClearPad(GPIOB, 17);   break;
+            case 6: palClearPad(GPIOC, 4);    break;
+            case 7: palClearPad(GPIOC, 5);    break;
+            case 8: palClearPad(GPIOD, 0);    break;
+        }
+    #endif
+
+        if (matrix_debouncing[row] != data) {
+            matrix_debouncing[row] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            matrix[row] = matrix_debouncing[row];
+        }
+        debouncing = false;
+    }
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    xprintf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        xprintf("%02X: ");
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                xprintf("1");
+            else
+                xprintf("0");
+        }
+        xprintf("\n");
+    }
+}
diff --git a/keyboards/infinity60/mcuconf.h b/keyboards/infinity60/mcuconf.h
new file mode 100644
index 0000000000..f453304b75
--- /dev/null
+++ b/keyboards/infinity60/mcuconf.h
@@ -0,0 +1,55 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1
+#define KINETIS_CLKDIV1_OUTDIV2     1
+#define KINETIS_CLKDIV1_OUTDIV4     2
+#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY       2
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/infinity60/readme.md b/keyboards/infinity60/readme.md
new file mode 100644
index 0000000000..97457b4077
--- /dev/null
+++ b/keyboards/infinity60/readme.md
@@ -0,0 +1,29 @@
+Infinity 60% keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Keymaps
+
+Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
+
+
+## Compiling
+
+Download or clone the whole firmware and navigate to the keyboards/infinity60 folder. Once your dev env is setup, you'll be able to use the `make` command to both compile your keymap and flash it to your keyboard.
+
+To just compile, which generates the output files in the `.build` folder at the root of the repository, run `make keymap`, where keymap is the name of the keymap that you want to compile.
+
+## Flashing
+
+To flash the firmware to the keyboard
+
+1. First press the flash button on the bottom of the keyboard. If you already have a flah button mapped in a keyboard layout running on the keyboard, you can also use that.
+2. Then run `make keymap-dfu-util`, where keymap is the name of the keymap you want to flash. On Linux based operating systems you might need to run the comamnd as root, for example `sudo make keymap-dfu-util` on Ubuntu.
+
+**Tip** `make keymap-dfu-util` will also compile the keymap if needed, so you can skip the compilation step if you want to.
+
diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk
new file mode 100644
index 0000000000..56d6470b59
--- /dev/null
+++ b/keyboards/infinity60/rules.mk
@@ -0,0 +1,66 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX128BLDR4
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity KB
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x5
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+BOARD = MCHCK_K20
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+CONSOLE_ENABLE ?= yes	# Console for debug
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	    # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file
diff --git a/keyboards/infinity_chibios/MEMO.txt b/keyboards/infinity_chibios/MEMO.txt
deleted file mode 100644
index e2886aa002..0000000000
--- a/keyboards/infinity_chibios/MEMO.txt
+++ /dev/null
@@ -1,385 +0,0 @@
-flabbergast's TMK/ChibiOS port
-==============================
-2015/10/16
-
-
-Build
------
-$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
-
-$ cd tmk_keyboard
-$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
-or
-$ cd tmk_keyboard/tmk_core/tool/chibios
-$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
-
-$ cd tmk_keyboard/keyboard/infinity_chibios
-$ make
-
-
-
-
-Chibios Configuration
----------------------
-halconf.h: for HAL configuration
-    placed in project directory
-    read in chibios/os/hal/hal.mk
-    included in chibios/os/hal/include/hal.h
-mcuconf.h: for MCU configuration
-    placed in project directory
-    included in halconf.h
-
-
-Chibios Term
-------------
-PAL = Port Abstraction Layer
-    palWritePad
-    palReadPad
-    palSetPad
-    chibios/os/hal/include/pal.h
-
-LLD = Low Level Driver
-
-
-Makefile
---------
-    #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-    MCU_FAMILY = KINETIS
-    MCU_SERIES = KL2x
-
-    # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-    #   or <this_dir>/ld/
-    MCU_LDSCRIPT = MKL26Z64
-
-    #  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-    MCU_STARTUP = kl2x
-
-    # Board: it should exist either in <chibios>/os/hal/boards/
-    #  or <this_dir>/boards
-    BOARD = PJRC_TEENSY_LC
-
-    MCU  = cortex-m0
-
-    # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-    ARMV = 6
-
-
-halconf.h
----------
-
-
-mcuconf.h
----------
-
-
-chconf.h
---------
-
-
-ld script
----------
---- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld     2015-10-15 09:08:58.732904304 +0900
-+++ ld/MKL26Z64.ld      2015-10-15 08:48:06.430215496 +0900
-@@ -27,7 +27,8 @@
- {
-   flash0   :  org = 0x00000000,  len = 0xc0
-   flashcfg :  org = 0x00000400,  len = 0x10
--  flash    :  org = 0x00000410,  len = 64k - 0x410
-+  flash    :  org = 0x00000410,  len = 62k - 0x410
-+  eeprom_emu : org = 0x0000F800, len = 2k
-   ram      :  org = 0x1FFFF800,  len = 8k
- }
-
-@@ -35,6 +36,10 @@
- __ram_size__            = LENGTH(ram);
- __ram_end__             = __ram_start__ + __ram_size__;
-
-+__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
-+__eeprom_workarea_size__  = LENGTH(eeprom_emu);
-+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-+
- SECTIONS
- {
-   . = 0;
-
-
-
-Configuration/Startup for Infinity 60%
---------------------------------------
-Configuration:
-
-
-Clock:
-Inifinity   
-    FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
-    Clock dividor:
-    SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
-    SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
-    SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
-    Internal reference clock:
-    MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
-    MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
-    FLL multipilication:
-    MCG_C4[DMX32] = 1
-    MCG_C4[DRST_DRS] = 01   FLL factor 1464 * 32.768kHz = 48MHz
-
-chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
-    k20x_clock_init(): called in __early_init() defined in board.c
-        disable watchdog and configure clock
-
-        configurable macros:
-        KINETIS_NO_INIT: whether init or not
-        KINETIS_MCG_MODE: clock mode   
-            KINETIS_MCG_MODE_FEI
-            KINETIS_MCG_MODE_PEE
-                hal/ports/KINETIS/K20x/hal_lld.h
-            
-
-chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
-    PALConfig pal_default_config
-    boardInit()
-    __early_init()
-    macro definitions for board infos, freq and mcu type
-
-chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
-
-USB
-
-
-Startup
--------
-    common/ports/ARMCMx/GCC/crt0_v[67]m.s
-        Reset_Handler: startup code
-    common/ports/ARMCMx/GCC/crt1.c
-        __core_init(): weak
-        __early_init(): weak
-        __late_init(): weak
-        __default_exit(): weak
-            called from Reset_Handler of crt0
-    common/ports/ARMCMx/GCC/vector.c
-    common/ports/ARMCMx/GCC/ld/*.ld
-
-chibios/os/common/ports/ARMCMx/compilers/GCC/
-├── crt0_v6m.s
-├── crt0_v7m.s
-├── crt1.c
-├── ld
-│   ├── MK20DX128BLDR3.ld
-│   ├── MK20DX128BLDR4.ld
-│   ├── MK20DX128.ld
-│   ├── MK20DX256.ld
-│   ├── MKL25Z128.ld
-│   ├── MKL26Z128.ld
-│   ├── MKL26Z64.ld
-│   └── STM32L476xG.ld
-├── mk
-│   ├── startup_k20x5.mk
-│   ├── startup_k20x7.mk
-│   ├── startup_k20x.mk
-│   ├── startup_kl2x.mk
-│   └── startup_stm32l4xx.mk
-├── rules.ld
-├── rules.mk
-└── vectors.c
-
-chibios/os/hal/
-├── boards
-│   ├── FREESCALE_FREEDOM_K20D50M
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── MCHCK_K20
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── PJRC_TEENSY_3
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── PJRC_TEENSY_3_1
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── PJRC_TEENSY_LC
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── readme.txt
-│   ├── simulator
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── ST_NUCLEO_F030R8
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   ├── board.mk
-│   │   └── cfg
-│   │       └── board.chcfg
-├── hal.mk
-├── include
-│   ├── adc.h
-│   ├── can.h
-│   ├── dac.h
-│   ├── ext.h
-│   ├── gpt.h
-│   ├── hal_channels.h
-│   ├── hal_files.h
-│   ├── hal.h
-│   ├── hal_ioblock.h
-│   ├── hal_mmcsd.h
-│   ├── hal_queues.h
-│   ├── hal_streams.h
-│   ├── i2c.h
-│   ├── i2s.h
-│   ├── icu.h
-│   ├── mac.h
-│   ├── mii.h
-│   ├── mmc_spi.h
-│   ├── pal.h
-│   ├── pwm.h
-│   ├── rtc.h
-│   ├── sdc.h
-│   ├── serial.h
-│   ├── serial_usb.h
-│   ├── spi.h
-│   ├── st.h
-│   ├── uart.h
-│   └── usb.h
-├── lib
-│   └── streams
-│       ├── chprintf.c
-│       ├── chprintf.h
-│       ├── memstreams.c
-│       ├── memstreams.h
-│       ├── nullstreams.c
-│       └── nullstreams.h
-├── osal
-│   ├── nil
-│   │   ├── osal.c
-│   │   ├── osal.h
-│   │   └── osal.mk
-│   ├── os-less
-│   │   └── ARMCMx
-│   │       ├── osal.c
-│   │       ├── osal.h
-│   │       └── osal.mk
-│   └── rt
-│       ├── osal.c
-│       ├── osal.h
-│       └── osal.mk
-├── ports
-│   ├── AVR
-│   ├── common
-│   │   └── ARMCMx
-│   │       ├── mpu.h
-│   │       ├── nvic.c
-│   │       └── nvic.h
-│   ├── KINETIS
-│   │   ├── K20x
-│   │   │   ├── hal_lld.c
-│   │   │   ├── hal_lld.h
-│   │   │   ├── kinetis_registry.h
-│   │   │   ├── platform.dox
-│   │   │   ├── platform.mk
-│   │   │   ├── pwm_lld.c
-│   │   │   ├── pwm_lld.h
-│   │   │   ├── spi_lld.c
-│   │   │   └── spi_lld.h
-│   │   ├── KL2x
-│   │   │   ├── hal_lld.c
-│   │   │   ├── hal_lld.h
-│   │   │   ├── kinetis_registry.h
-│   │   │   ├── platform.mk
-│   │   │   ├── pwm_lld.c
-│   │   │   └── pwm_lld.h
-│   │   ├── LLD
-│   │   │   ├── adc_lld.c
-│   │   │   ├── adc_lld.h
-│   │   │   ├── ext_lld.c
-│   │   │   ├── ext_lld.h
-│   │   │   ├── gpt_lld.c
-│   │   │   ├── gpt_lld.h
-│   │   │   ├── i2c_lld.c
-│   │   │   ├── i2c_lld.h
-│   │   │   ├── pal_lld.c
-│   │   │   ├── pal_lld.h
-│   │   │   ├── serial_lld.c
-│   │   │   ├── serial_lld.h
-│   │   │   ├── st_lld.c
-│   │   │   ├── st_lld.h
-│   │   │   ├── usb_lld.c
-│   │   │   └── usb_lld.h
-│   │   └── README.md
-│   ├── LPC
-│   ├── simulator
-│   └── STM32
-├── src
-│   ├── adc.c
-│   ├── can.c
-│   ├── dac.c
-│   ├── ext.c
-│   ├── gpt.c
-│   ├── hal.c
-│   ├── hal_mmcsd.c
-│   ├── hal_queues.c
-│   ├── i2c.c
-│   ├── i2s.c
-│   ├── icu.c
-│   ├── mac.c
-│   ├── mmc_spi.c
-│   ├── pal.c
-│   ├── pwm.c
-│   ├── rtc.c
-│   ├── sdc.c
-│   ├── serial.c
-│   ├── serial_usb.c
-│   ├── spi.c
-│   ├── st.c
-│   ├── uart.c
-│   └── usb.c
-└── templates
-    ├── adc_lld.c
-    ├── adc_lld.h
-    ├── can_lld.c
-    ├── can_lld.h
-    ├── dac_lld.c
-    ├── dac_lld.h
-    ├── ext_lld.c
-    ├── ext_lld.h
-    ├── gpt_lld.c
-    ├── gpt_lld.h
-    ├── halconf.h
-    ├── hal_lld.c
-    ├── hal_lld.h
-    ├── i2c_lld.c
-    ├── i2c_lld.h
-    ├── i2s_lld.c
-    ├── i2s_lld.h
-    ├── icu_lld.c
-    ├── icu_lld.h
-    ├── mac_lld.c
-    ├── mac_lld.h
-    ├── mcuconf.h
-    ├── osal
-    │   ├── osal.c
-    │   ├── osal.h
-    │   └── osal.mk
-    ├── pal_lld.c
-    ├── pal_lld.h
-    ├── platform.mk
-    ├── pwm_lld.c
-    ├── pwm_lld.h
-    ├── rtc_lld.c
-    ├── rtc_lld.h
-    ├── sdc_lld.c
-    ├── sdc_lld.h
-    ├── serial_lld.c
-    ├── serial_lld.h
-    ├── spi_lld.c
-    ├── spi_lld.h
-    ├── st_lld.c
-    ├── st_lld.h
-    ├── uart_lld.c
-    ├── uart_lld.h
-    ├── usb_lld.c
-    └── usb_lld.h
diff --git a/keyboards/infinity_chibios/Makefile b/keyboards/infinity_chibios/Makefile
deleted file mode 100644
index 4e2a6f00fd..0000000000
--- a/keyboards/infinity_chibios/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-ifndef MAKEFILE_INCLUDED
-	include ../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/infinity_chibios/bootloader_defs.h b/keyboards/infinity_chibios/bootloader_defs.h
deleted file mode 100644
index c67153be60..0000000000
--- a/keyboards/infinity_chibios/bootloader_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/infinity_chibios/chconf.h b/keyboards/infinity_chibios/chconf.h
deleted file mode 100644
index 43c845739a..0000000000
--- a/keyboards/infinity_chibios/chconf.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 1000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 20
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                FALSE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 FALSE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/infinity_chibios/config.h b/keyboards/infinity_chibios/config.h
deleted file mode 100644
index 452cc2a9fb..0000000000
--- a/keyboards/infinity_chibios/config.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define PREVENT_STUCK_MODIFIERS
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
-#define DEVICE_VER      0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/*   at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER "TMK"
-#define USBSTR_MANUFACTURER    'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00'
-#define PRODUCT "Infinity keyboard/TMK"
-#define USBSTR_PRODUCT         'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00'
-
-/* key matrix size */
-#define MATRIX_ROWS 9
-#define MATRIX_COLS 7
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Keymap for Infinity prototype */
-//#define INFINITY_PROTOTYPE
-
-/* Keymap for Infinity 1.1a (first revision with LED support) */
-//#define INFINITY_LED
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/infinity_chibios/halconf.h b/keyboards/infinity_chibios/halconf.h
deleted file mode 100644
index 46b37a4f46..0000000000
--- a/keyboards/infinity_chibios/halconf.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          TRUE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/keyboards/infinity_chibios/infinity_chibios.c b/keyboards/infinity_chibios/infinity_chibios.c
deleted file mode 100644
index 845eda01b0..0000000000
--- a/keyboards/infinity_chibios/infinity_chibios.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "infinity_chibios.h"
diff --git a/keyboards/infinity_chibios/infinity_chibios.h b/keyboards/infinity_chibios/infinity_chibios.h
deleted file mode 100644
index f1ba15e489..0000000000
--- a/keyboards/infinity_chibios/infinity_chibios.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
-
-#include "quantum.h"
-
-#ifdef INFINITY_PROTOTYPE
-
-/* Infinity prototype */
-#define KEYMAP( \
-    K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \
-    K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \
-    K13, K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, \
-    K54, K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, \
-    K06, K16, K26,           K36,                K46, K56, K66, K76 \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06 }, \
-    { K10, K11, K12, K13, K14, K15, K16 }, \
-    { K20, K21, K22, K23, K24, K25, K26 }, \
-    { K30, K31, K32, K33, K34, K35, K36 }, \
-    { K40, K41, K42, K43, K44, K45, K46 }, \
-    { K50, K51, K52, K53, K54, K55, K56 }, \
-    { K60, K61, K62, K63, K64, K65, K66 }, \
-    { K70, K71, K72, K73, K74, K75, K76 }, \
-    { K80, K81, K82, K83, K84, K85, K86 }  \
-}
-
-#else
-
-/* Infinity production */
-#define KEYMAP( \
-    K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \
-    K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \
-    K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \
-    K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \
-    K16, K26, K36,           K46,                K56, K66, K76, K86 \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06 }, \
-    { K10, K11, K12, K13, K14, K15, K16 }, \
-    { K20, K21, K22, K23, K24, K25, K26 }, \
-    { K30, K31, K32, K33, K34, K35, K36 }, \
-    { K40, K41, K42, K43, K44, K45, K46 }, \
-    { K50, K51, K52, K53, K54, K55, K56 }, \
-    { K60, K61, K62, K63, K64, K65, K66 }, \
-    { K70, K71, K72, K73, K74, K75, K76 }, \
-    { K80, K81, K82, K83, K84, K85, K86 }  \
-}
-
-#endif
-
-#endif
diff --git a/keyboards/infinity_chibios/keymaps/default/keymap.c b/keyboards/infinity_chibios/keymaps/default/keymap.c
deleted file mode 100644
index 5f3b46a367..0000000000
--- a/keyboards/infinity_chibios/keymaps/default/keymap.c
+++ /dev/null
@@ -1,48 +0,0 @@
-#include "infinity_chibios.h"
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Layer 0: Default Layer
-     * ,-----------------------------------------------------------.
-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-     * |-----------------------------------------------------------|
-     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn0|
-     * |-----------------------------------------------------------'
-     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
-     * `-----------------------------------------------------------'
-     */
-    [0] = KEYMAP(
-      KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS, KC_GRV, \
-      KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC, \
-      KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,  \
-      KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,MO(1), \
-      KC_NO,  KC_LGUI,KC_LALT,          KC_SPC,                KC_RALT,KC_RGUI,KC_NO, KC_NO),
-
-    /* Layer 1: HHKB mode (HHKB Fn)
-     * ,-----------------------------------------------------------.
-     * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
-     * |-----------------------------------------------------------|
-     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
-     * |-----------------------------------------------------------|
-     * |      |VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
-     * |-----------------------------------------------------------|
-     * |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
-     * `-----------------------------------------------------------'
-     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
-     * `-----------------------------------------------------------'
-     */ 
-    [1] = KEYMAP(
-      KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,   \
-      KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS, KC_BSPC,      \
-      KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT,            \
-      KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS,            \
-      KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-};
-
-const uint16_t fn_actions[] = {
-    
-};
-
diff --git a/keyboards/infinity_chibios/keymaps/depariel/keymap.c b/keyboards/infinity_chibios/keymaps/depariel/keymap.c
deleted file mode 100755
index e68891f79e..0000000000
--- a/keyboards/infinity_chibios/keymaps/depariel/keymap.c
+++ /dev/null
@@ -1,82 +0,0 @@
-#include "infinity_chibios.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Layer 0: Default Layer
-     * ,-----------------------------------------------------------.
-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Bksp|
-     * |-----------------------------------------------------------|
-     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2|
-     * |-----------------------------------------------------------'
-     * |Fn2 |Gui |Alt |         Space           |RAlt|Prv|PlPs|Next|
-     * `-----------------------------------------------------------'
-     */
-    [0] = KEYMAP(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,            KC_BSLS,  KC_GRV, \
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSPC, \
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, LT(5, KC_ENT),  \
-        KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC, MO(4), \
-        MO(4),   KC_LGUI, KC_LALT,               LT(3, KC_SPC),                 KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
-
-    /* Layer 1: "Toggle" off SpaceFn for League of Legends
-     */
-    [1] = KEYMAP(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS,  KC_GRV, \
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(4), \
-        MO(4),   KC_LGUI, KC_LALT,                   KC_SPC,                    KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
-           
-    /* Layer 2: "Toggle" off SpaceFn for MapleRoyals
-     */
-    [2] = KEYMAP(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS,  KC_GRV, \
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_LSFT, \
-        MO(4),   KC_LGUI, KC_LALT,                   KC_SPC,                    KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
-
-    /* Layer 3: FN layer 1
-     */ 
-    [3] = KEYMAP(
-        KC_NO,           KC_F1,   KC_F2,   KC_F3,   KC_F4,          KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_NO,   \
-        KC_NO,           KC_BTN1, KC_MS_U, KC_BTN2, LALT(KC_F4),    KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_UP,   KC_NO,   KC_LPRN, KC_RPRN, KC_DEL,      \
-        MO(6),           KC_MS_L, KC_MS_D, KC_MS_R, KC_NO,          KC_END,  KC_PGDN, KC_TILD, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,           \
-        LGUI(KC_SPC),    KC_NO,   KC_NO,   KC_NO,   KC_NO,          KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_CALC, KC_MENU, KC_TRNS, TG(4),           \
-        KC_TRNS,         KC_TRNS, KC_TRNS,                       LT(3, KC_SPC),                KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU),
-    
-    /* Layer 4: FN layer 2
-     */ 
-    [4] = KEYMAP(
-        KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_PMNS, KC_PPLS, KC_PSLS, TG(2),   \
-        KC_CAPS, KC_NO,   KC_UP,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_PSCR, KC_NO,   KC_P7,   KC_P8,   KC_P9,   KC_PAST, KC_BSPC,      \
-        KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_P4,   KC_P5,   KC_P6,   KC_PENT,           \
-        KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_P1,   KC_P2,   KC_P3,   KC_RSFT, MO(4),           \
-        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                   KC_P0,   KC_PDOT, KC_NO,   TG(1)),
-    
-    /* Layer 5: FN layer 3
-     */ 
-    [5] = KEYMAP(
-        KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,            KC_NO,   KC_NO,   \
-        KC_TAB , KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_NO,            KC_TRNS,      \
-        KC_TRNS, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F17,  KC_F18,  KC_F19,  KC_F20,  LT(5, KC_ENT),           \
-        KC_TRNS, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F21,  KC_F22,  KC_F23,  KC_F24,  KC_TRNS, KC_TRNS,           \
-        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                   KC_RALT, KC_NO,   KC_NO,  KC_NO),
-    
-    /* Layer 6: FN layer 4
-     */ 
-    [6] = KEYMAP(
-        KC_NO,                 KC_NO,            KC_NO,          KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   \
-        LCTL(LSFT(KC_TAB)),    KC_NO,            LGUI(KC_UP),    KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,      \
-        MO(6),                 LGUI(KC_LEFT),    LGUI(KC_DOWN),  LGUI(KC_RGHT),    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,       \
-        KC_TRNS,               KC_NO,            KC_NO,          KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_TRNS, KC_TRNS,           \
-        KC_TRNS,               KC_TRNS,          KC_TRNS,                   KC_TRNS,                 KC_TRNS, KC_NO,   KC_NO,   KC_NO),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
diff --git a/keyboards/infinity_chibios/keymaps/hasu/keymap.c b/keyboards/infinity_chibios/keymaps/hasu/keymap.c
deleted file mode 100644
index a1954d2587..0000000000
--- a/keyboards/infinity_chibios/keymaps/hasu/keymap.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include "infinity_chibios.h"
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Layer 0: Default Layer
-     * ,-----------------------------------------------------------.
-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-     * |-----------------------------------------------------------|
-     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn0|
-     * |-----------------------------------------------------------'
-     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
-     * `-----------------------------------------------------------'
-     */
-    [0] = KEYMAP(
-        KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,           KC_MINS,KC_EQL, KC_BSLS,KC_GRV, \
-        KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,           KC_LBRC,KC_RBRC,KC_BSPC, \
-        KC_LCTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   LT(3, KC_SCLN), KC_QUOT,MT(KC_RCTL, KC_ENT), \
-        OSM(MOD_LSFT), KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, LT(2, KC_SLSH), KC_RSFT,TG(1), \
-        KC_NO,     KC_LGUI,KC_LALT,         LT(4, KC_SPC),                 MO(4),  KC_RGUI,KC_NO,          KC_NO),
-
-    /* Layer 1: HHKB mode (HHKB Fn)
-     * ,-----------------------------------------------------------.
-     * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
-     * |-----------------------------------------------------------|
-     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
-     * |-----------------------------------------------------------|
-     * |      |VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
-     * |-----------------------------------------------------------|
-     * |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
-     * `-----------------------------------------------------------'
-     * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
-     * `-----------------------------------------------------------'
-     */ 
-    [1] = KEYMAP(
-        KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
-        KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP,  KC_TRNS,KC_BSPC, \
-        KC_LCTL,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_ENT, \
-        KC_LSFT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS, \
-        KC_TRNS,KC_LGUI,KC_LALT,          KC_TRNS,                      KC_RALT,KC_RGUI,KC_TRNS,KC_TRNS),
-
-    /* Layer 2: Vi mode[Slash]
-     * ,-----------------------------------------------------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
-     * |-----------------------------------------------------------|
-     * |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd|   |   |   |Backs|
-     * |-----------------------------------------------------------|
-     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |   |   |   |   |   |Hom|PgD|PgUlEnd|Fn0|Shift |   |
-     * `-----------------------------------------------------------'
-     *       |Gui|Alt  |          Space        |Alt  |Gui|
-     *       `-------------------------------------------'
-     */
-    [2] = KEYMAP(
-        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,         KC_F11, KC_F12, KC_INS, KC_DEL, \
-        KC_TAB, KC_HOME,KC_PGDN,KC_UP,  KC_PGUP,KC_END, KC_HOME,KC_PGDN,KC_PGUP,KC_END, KC_NO,          KC_NO,  KC_NO,  KC_BSPC, \
-        KC_LCTL,KC_NO,  KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,  KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT,KC_NO,          KC_NO,  KC_ENT, \
-        KC_LSFT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_HOME,KC_PGDN,KC_PGUP,KC_END, LT(2, KC_SLSH), KC_RSFT,KC_TRNS, \
-        KC_TRNS,KC_LGUI,KC_LALT,          KC_SPC,                       KC_RALT,KC_RGUI,KC_TRNS,        KC_TRNS),
-
-    /* Layer 3: Mouse mode(IJKL)[Semicolon]
-     * ,-----------------------------------------------------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
-     * |-----------------------------------------------------------|
-     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
-     * |-----------------------------------------------------------|
-     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Fn |   |Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
-     * `-----------------------------------------------------------'
-     *      |Gui |Alt  |          Mb1          |Fn   |Fn |
-     *      `--------------------------------------------'
-     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
-     */
-    [3] = KEYMAP(
-        KC_GRV,       KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,          KC_F9,          KC_F10,         KC_F11,         KC_F12,        KC_INS, KC_DEL, \
-        LALT(KC_TAB), KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_MS_U,        KC_WH_U,        KC_WH_R,        ALT_T(KC_LEFT), ALT_T(KC_RGHT),LALT(KC_TAB), \
-        KC_LCTL,      KC_ACL0,KC_ACL1,KC_ACL2,KC_ACL2,KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,        KC_MS_R,        LT(3, KC_SCLN), KC_NO,          KC_ENT, \
-        KC_LSFT,      KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT), ALT_T(KC_RGHT), KC_NO,          KC_RSFT,        KC_TRNS, \
-        KC_TRNS,      KC_LGUI,KC_LALT,          KC_BTN1,                      KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS),
-
-    /* Layer 4: Mouse mode(IJKL)[Space]
-     * ,-----------------------------------------------------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
-     * |-----------------------------------------------------------|
-     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
-     * |-----------------------------------------------------------|
-     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Mb1|   |Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
-     * `-----------------------------------------------------------'
-     *      |Gui |Alt  |          Mb1          |Fn   |Fn |
-     *      `--------------------------------------------'
-     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
-     */
-    [4] = KEYMAP(
-        KC_GRV,       KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,         KC_F9,         KC_F10, KC_F11, KC_F12, KC_INS,       KC_DEL, \
-        LALT(KC_TAB), KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_MS_U,       KC_WH_U,       KC_WH_R,KC_BTN4,KC_BTN5,LALT(KC_TAB), \
-        KC_LCTL,      KC_VOLD,KC_VOLU,KC_MUTE,KC_NO,  KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,       KC_MS_R,       KC_BTN1,KC_NO,  KC_ENT, \
-        KC_LSFT,      KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT),ALT_T(KC_RGHT),KC_NO,  KC_RSFT,KC_TRNS, \
-        KC_TRNS,      KC_LGUI,KC_LALT,          KC_TRNS,                      KC_TRNS,       KC_TRNS,       KC_TRNS,KC_TRNS),
-
-};
-
-/*
- * Fn action definition
- */
-const uint16_t fn_actions[] = {
-
-};
diff --git a/keyboards/infinity_chibios/led.c b/keyboards/infinity_chibios/led.c
deleted file mode 100644
index aed66c7c03..0000000000
--- a/keyboards/infinity_chibios/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-
-#include "led.h"
-
-
-void led_set(uint8_t usb_led) {
-}
diff --git a/keyboards/infinity_chibios/matrix.c b/keyboards/infinity_chibios/matrix.c
deleted file mode 100644
index 62c165aa53..0000000000
--- a/keyboards/infinity_chibios/matrix.c
+++ /dev/null
@@ -1,171 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include "hal.h"
-#include "timer.h"
-#include "wait.h"
-#include "print.h"
-#include "matrix.h"
-
-
-/*
- * Infinity Pinusage:
- * Column pins are input with internal pull-down. Row pins are output and strobe with high.
- * Key is high or 1 when it turns on.
- *  INFINITY PRODUCTION (NO LED)
- *     col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
- *     row: { PTB0, PTB1, PTB2, PTB3, PTB16, PTB17, PTC4, PTC5, PTD0 }
- *  INFINITY PRODUCTION (WITH LED)
- *     col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
- *     row: { PTC0, PTC1, PTC2, PTC3, PTC4, PTC5, PTC6, PTC7, PTD0 }
- */
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-static bool debouncing = false;
-static uint16_t debouncing_time = 0;
-
-
-void matrix_init(void)
-{
-    /* Column(sense) */
-    palSetPadMode(GPIOD, 1,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 2,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 3,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 4,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 5,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 6,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 7,  PAL_MODE_INPUT_PULLDOWN);
-
-#ifdef INFINITY_LED
-    /* Row(strobe) */
-    palSetPadMode(GPIOC, 0,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 1,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 2,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 3,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 4,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 5,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 6,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 7,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOD, 0,  PAL_MODE_OUTPUT_PUSHPULL);
-#else
-    /* Row(strobe) */
-    palSetPadMode(GPIOB, 0,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 1,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 2,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 3,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 17, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 4,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 5,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOD, 0,  PAL_MODE_OUTPUT_PUSHPULL);
-#endif
-    memset(matrix, 0, MATRIX_ROWS);
-    memset(matrix_debouncing, 0, MATRIX_ROWS);
-}
-
-uint8_t matrix_scan(void)
-{
-    for (int row = 0; row < MATRIX_ROWS; row++) {
-        matrix_row_t data = 0;
-    #ifdef INFINITY_LED
-        // strobe row
-        switch (row) {
-            case 0: palSetPad(GPIOC, 0);    break;
-            case 1: palSetPad(GPIOC, 1);    break;
-            case 2: palSetPad(GPIOC, 2);    break;
-            case 3: palSetPad(GPIOC, 3);    break;
-            case 4: palSetPad(GPIOC, 4);    break;
-            case 5: palSetPad(GPIOC, 5);    break;
-            case 6: palSetPad(GPIOC, 6);    break;
-            case 7: palSetPad(GPIOC, 7);    break;
-            case 8: palSetPad(GPIOD, 0);    break;
-        }
-    #else
-        // strobe row
-        switch (row) {
-            case 0: palSetPad(GPIOB, 0);    break;
-            case 1: palSetPad(GPIOB, 1);    break;
-            case 2: palSetPad(GPIOB, 2);    break;
-            case 3: palSetPad(GPIOB, 3);    break;
-            case 4: palSetPad(GPIOB, 16);   break;
-            case 5: palSetPad(GPIOB, 17);   break;
-            case 6: palSetPad(GPIOC, 4);    break;
-            case 7: palSetPad(GPIOC, 5);    break;
-            case 8: palSetPad(GPIOD, 0);    break;
-        }
-    #endif
-
-        wait_us(1); // need wait to settle pin state
-
-        // read col data
-        data = (palReadPort(GPIOD)>>1);
-    #ifdef INFINITY_LED
-        // un-strobe row
-        switch (row) {
-            case 0: palClearPad(GPIOC, 0);    break;
-            case 1: palClearPad(GPIOC, 1);    break;
-            case 2: palClearPad(GPIOC, 2);    break;
-            case 3: palClearPad(GPIOC, 3);    break;
-            case 4: palClearPad(GPIOC, 4);    break;
-            case 5: palClearPad(GPIOC, 5);    break;
-            case 6: palClearPad(GPIOC, 6);    break;
-            case 7: palClearPad(GPIOC, 7);    break;
-            case 8: palClearPad(GPIOD, 0);    break;
-        }
-    #else
-        // un-strobe row
-        switch (row) {
-            case 0: palClearPad(GPIOB, 0);    break;
-            case 1: palClearPad(GPIOB, 1);    break;
-            case 2: palClearPad(GPIOB, 2);    break;
-            case 3: palClearPad(GPIOB, 3);    break;
-            case 4: palClearPad(GPIOB, 16);   break;
-            case 5: palClearPad(GPIOB, 17);   break;
-            case 6: palClearPad(GPIOC, 4);    break;
-            case 7: palClearPad(GPIOC, 5);    break;
-            case 8: palClearPad(GPIOD, 0);    break;
-        }
-    #endif
-
-        if (matrix_debouncing[row] != data) {
-            matrix_debouncing[row] = data;
-            debouncing = true;
-            debouncing_time = timer_read();
-        }
-    }
-
-    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            matrix[row] = matrix_debouncing[row];
-        }
-        debouncing = false;
-    }
-    return 1;
-}
-
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & (1<<col));
-}
-
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    xprintf("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        xprintf("%02X: ");
-        matrix_row_t data = matrix_get_row(row);
-        for (int col = 0; col < MATRIX_COLS; col++) {
-            if (data & (1<<col))
-                xprintf("1");
-            else
-                xprintf("0");
-        }
-        xprintf("\n");
-    }
-}
diff --git a/keyboards/infinity_chibios/mcuconf.h b/keyboards/infinity_chibios/mcuconf.h
deleted file mode 100644
index f453304b75..0000000000
--- a/keyboards/infinity_chibios/mcuconf.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define K20x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-
-/* Select the MCU clocking mode below by enabling the appropriate block. */
-
-#define KINETIS_NO_INIT             FALSE
-
-/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
-#define KINETIS_CLKDIV1_OUTDIV1     1
-#define KINETIS_CLKDIV1_OUTDIV2     1
-#define KINETIS_CLKDIV1_OUTDIV4     2
-#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
-#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0            TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0                TRUE
-/* Need to redefine this, since the default is for K20x */
-/* This is for Teensy LC; you should comment it out (or change to 5)
- * for Teensy 3.x */
-#define KINETIS_USB_USB0_IRQ_PRIORITY       2
-
-#endif /* _MCUCONF_H_ */
diff --git a/keyboards/infinity_chibios/rules.mk b/keyboards/infinity_chibios/rules.mk
deleted file mode 100644
index 56d6470b59..0000000000
--- a/keyboards/infinity_chibios/rules.mk
+++ /dev/null
@@ -1,66 +0,0 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX128BLDR4
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity KB
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-BOARD = MCHCK_K20
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file
-- 
cgit v1.2.3


From 3bdebd2270a40593f4779f0013f588e47b3c53fc Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 28 Aug 2016 00:52:32 +0300
Subject: Update list of community keyboards

---
 keyboards/readme.md | 47 ++++++++++++++++++++++++++++-------------------
 1 file changed, 28 insertions(+), 19 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/readme.md b/keyboards/readme.md
index 4f17962191..81a23c7e55 100644
--- a/keyboards/readme.md
+++ b/keyboards/readme.md
@@ -9,38 +9,47 @@ These keyboards are manufactured by the maintainers of QMK.
 
 What makes OLKB keyboards shine is a combo of lean aesthetics, compact size, and killer tactile feel. These are available through [olkb.com](http://olkb.com) as well as through [Massdrop](http://massdrop.com) from time to time, as easy to assemble kits.
 
-* [Planck](/keyboards/planck/) - A 40% DIY powerhouse of customizability and modification capability. It's a lean, mean, typing machine.
-* [Preonic](/keyboards/preonic/) - Like the Planck, but bigger. 50%.
-* [Atomic](/keyboards/atomic/) - Imagine the size of the Planck. Now imagine the size of the Preonic. Now imagine _bigger_. That is the Atomic. A 60% keyboard.
+* [Planck](/keyboards/planck/) &mdash; A 40% DIY powerhouse of customizability and modification capability. It's a lean, mean, typing machine.
+* [Preonic](/keyboards/preonic/) &mdash; Like the Planck, but bigger. 50%.
+* [Atomic](/keyboards/atomic/) &mdash; Imagine the size of the Planck. Now imagine the size of the Preonic. Now imagine _bigger_. That is the Atomic. A 60% keyboard.
 
 ### ErgoDox EZ - Erez Zukerman
 
 Made in Taiwan using advanced robotic manufacturing, the ErgoDox EZ is a fully-assembled, premium ergonomic keyboard. Its split design allows you to place both halves shoulder width, and its custom-made wrist rests and tilt/tent kit make for incredibly comfortable typing. Available on [ergodox-ez.com](https://ergodox-ez.com).
 
-* [ErgoDox EZ](/keyboards/ergodox/) - Our one and only product. Yes, it's that awesome. Comes with either printed or blank keycaps, and 7 different keyswitch types.
+* [ErgoDox EZ](/keyboards/ergodox/) &mdash; Our one and only product. Yes, it's that awesome. Comes with either printed or blank keycaps, and 7 different keyswitch types.
 
 ### Clueboard - Zach White
 
 Designed and built in Felton, CA, Clueboards keyboard emphasize quality and locally sourced components, available on [clueboard.co](http://clueboard.co)
 
-* [Clueboard](/keyboards/clueboard/) - The 66% custom keyboard.
-* [Cluepad](/keyboards/cluepad/) - A mechanical numpad with QMK superpowers.
+* [Clueboard](/keyboards/clueboard/) &mdash; The 66% custom keyboard.
+* [Cluecard](/keyboards/cluecard/) &mdash; A small board to help you hack on QMK.
+* [Cluepad](/keyboards/cluepad/) &mdash; A mechanical numpad with QMK superpowers.
 
 
 ## Community-supported QMK Keyboards
 
 These keyboards are part of the QMK repository, but their manufacturers are not official maintainers of the repository.
 
-* [alps64](/keyboards/alps64/) &mdash; A 60% keyboard for Alps keyswitches.
-* [arrow_pad](/keyboards/arrow_pad) &mdash; A custom creation by IBNobody.
-* [atreus](/keyboards/atreus) &mdash; Made by Technomancy.
-* [bantam44](/keyboards/bantam44) &mdash; It is a 44-key 40% staggered keyboard.
-* [gh60](/keyboards/gh60) &mdash; A 60% Geekhack community-driven project.
-* [hhkb](/keyboards/hhkb) &mdash; The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
-* [jd45](/keyboards/jd45) &mdash; Another Geekhack community project, designed by jdcarpe.
-* [kc60](/keyboards/kc60) &mdash; A programmable Chinese-made keyboard, lost in the mists of time.
-* [kitten_paw](/keyboards/kitten_paw) &mdash; A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies](https://github.com/BathroomEpiphanies)
-* [phantom](/keyboards/phantom) &mdash; A tenkeyless kit by Teel, also from Geekhack.
-* [retro_refit](/keyboards/retro_refit) &mdash; Another creation by IBNobody.
-* [satan](/keyboards/satan) &mdash; A GH60 variant.
-* [sixkeyboard](/keyboards/sixkeyboard) &mdash; A 6-key keyboard made by TechKeys.
+* [Alps64](/keyboards/alps64) &mdash; A 60% keyboard for Alps keyswitches.
+* [AMJ60](/keyboards/amj60) &mdash; DIY/Assembled compact 60% keyboard.
+* [Arrow Pad](/keyboards/arrow_pad) &mdash; A custom creation by IBNobody.
+* [Atreus](/keyboards/atreus) &mdash; Made by Technomancy.
+* [Bantam44](/keyboards/bantam44) &mdash; It is a 44-key 40% staggered keyboard.
+* [Ergodox Infinity](/keyboards/ergodox) - Ergonomic Split Keyboard by Input Club.
+* [GH60](/keyboards/gh60) &mdash; A 60% Geekhack community-driven project.
+* [Happy Hacking Keyboard](/keyboards/hhkb) &mdash; The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
+* [Infinity 60%](/keyboards/infinity60) - &mdash; Compact community keyboard by Input Club.
+* [JD45](/keyboards/jd45) &mdash; Another Geekhack community project, designed by jdcarpe.
+* [KC60](/keyboards/kc60) &mdash; A programmable Chinese-made keyboard, lost in the mists of time.
+* [Kinesis Advantage](/keyboards/kinesis) &mdash; Contoured ergonomic keyboard by Kinesis Computer Ergonomics.
+* [The Kitten Paw](/keyboards/kitten_paw) &mdash; A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies](https://github.com/BathroomEpiphanies).
+* [Lets Split](/keyboards/lets_split) - Split ortholinear 40% keyboard.
+* [Phantom](/keyboards/phantom) &mdash; A tenkeyless kit by Teel, also from Geekhack.
+* [Retro Refit](/keyboards/retro_refit) &mdash; Another creation by IBNobody.
+* [S60-x](/keyboards/s60-x) &mdash; DIY compact keyboard designed by VinnyCordeiro for Sentraq.
+* [Satan](/keyboards/satan) &mdash; A GH60 variant.
+* [SixKeyBoard](/keyboards/sixkeyboard) &mdash; A 6-key keyboard made by TechKeys.
+* [TheVan 44](/keyboars/tv44) &mdash; A 44-key staggered keybard by Evangs.
+* [Vision Division](/keyboards/vision_division) &mdash; Full Size / Split Linear Keyboard by IBNobody.
-- 
cgit v1.2.3


From 42f1ce08dc09ff784add32750e55aa03e2427f5e Mon Sep 17 00:00:00 2001
From: Jack Henahan <jhenahan@me.com>
Date: Mon, 29 Aug 2016 11:35:07 -0400
Subject: jhenahan layout

---
 keyboards/planck/keymaps/jhenahan/Makefile  |  25 +++
 keyboards/planck/keymaps/jhenahan/config.h  |   9 +
 keyboards/planck/keymaps/jhenahan/keymap.c  | 314 ++++++++++++++++++++++++++++
 keyboards/planck/keymaps/jhenahan/readme.md |  35 ++++
 4 files changed, 383 insertions(+)
 create mode 100644 keyboards/planck/keymaps/jhenahan/Makefile
 create mode 100644 keyboards/planck/keymaps/jhenahan/config.h
 create mode 100644 keyboards/planck/keymaps/jhenahan/keymap.c
 create mode 100644 keyboards/planck/keymaps/jhenahan/readme.md

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/jhenahan/Makefile b/keyboards/planck/keymaps/jhenahan/Makefile
new file mode 100644
index 0000000000..de01ad2404
--- /dev/null
+++ b/keyboards/planck/keymaps/jhenahan/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/planck/keymaps/jhenahan/config.h b/keyboards/planck/keymaps/jhenahan/config.h
new file mode 100644
index 0000000000..cd3adc41cc
--- /dev/null
+++ b/keyboards/planck/keymaps/jhenahan/config.h
@@ -0,0 +1,9 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define FORCE_NKRO
+#define WORKMAN_SOUND COLEMAK_SOUND
+
+#endif
diff --git a/keyboards/planck/keymaps/jhenahan/keymap.c b/keyboards/planck/keymaps/jhenahan/keymap.c
new file mode 100644
index 0000000000..2bda4b6956
--- /dev/null
+++ b/keyboards/planck/keymaps/jhenahan/keymap.c
@@ -0,0 +1,314 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _WORKMAN 0
+#define _DEAD 1
+#define _QWERTY 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _ADJUST 16
+
+enum planck_keycodes {
+  WORKMAN = SAFE_RANGE,
+  DEAD,
+  QWERTY,
+  LOWER,
+  RAISE,
+  PLOVER,
+  EXT_PLV,
+  TOG_PLV
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+/* Workman
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   D  |   R  |   W  |   B  |   J  |   F  |   U  |   P  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   H  |   T  |   G  |   Y  |   N  |   E  |   O  |   I  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   M  |   C  |   V  |   K  |   L  | Dead |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | RAlt | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_WORKMAN] = {
+  {KC_TAB,              KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN, KC_BSPC},
+  {MT(MOD_LCTL,KC_ESC), KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    KC_QUOT},
+  {KC_LSFT,             KC_Z,    KC_X,    KC_M,    KC_C,    KC_V,    KC_K,    KC_L,    DEAD,    KC_DOT,  KC_SLSH, KC_ENT},
+  {KC_LCTL,             KC_RALT, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Workman Dead Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   %  |   &  |   ?  |   +  |   @  |   $  |   _  |   [  |   ]  |   !  |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   /  |   (  |   =  |   0  |   {  |   }  |   1  |   *  |   )  |   -  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   6  |   7  |   8  |   9  |   |  |   \  |   2  |   3  |   4  |   5  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |   <  |   ~  |   `  |      ,      |   #  |   ^  |   >  |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DEAD] = {
+  {XXXXXXX,  KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT,   KC_DLR,  KC_UNDS, KC_LBRC, KC_RBRC,  KC_EXLM, XXXXXXX},
+  {XXXXXXX,  KC_SLSH, KC_LPRN, KC_EQL,  KC_0,    KC_LCBR, KC_RCBR, KC_1,    KC_ASTR, KC_RPRN,  KC_MINS, XXXXXXX},
+  {XXXXXXX,  KC_6,    KC_7,    KC_8,    KC_9,    KC_PIPE, KC_BSLS, KC_2,    KC_3,    KC_4,     KC_5,    XXXXXXX},
+  {XXXXXXX,  XXXXXXX, KC_LT,   KC_TILD, KC_GRV,  KC_COMM, KC_COMM, KC_HASH, KC_CIRC, KC_GT,    XXXXXXX, XXXXXXX}
+},
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | RAlt | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      | Vol+ |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Next | Vol- | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC},
+  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS), _______, KC_VOLU, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV,    KC_MNXT, KC_VOLD, KC_MPLY}
+},
+
+/* Raise - KWM Interaction
+ * ,-----------------------------------------------------------------------------------.
+ * |Restrt|      |TgSplt|Flotng|Parent|FlScrn|InsMrk| InsW | InsS | InsN | InsE |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      | Mark |Rotate|Prefix| Term | BSP  |SwpMrk|SwapW |SwapS |SwapN |SwapE |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |MarkW |MarkS |MarkN |MarkE |Monocl|Float |FocusW|FocusS|FocusN|FocusE|      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {LCAG(KC_Q), XXXXXXX,    LCAG(KC_S),       LCAG(KC_W),   LCAG(KC_D), LCAG(KC_F),        LCTL(S(KC_X)),    LCTL(S(KC_H)),    LCTL(S(KC_J)),     LCTL(S(KC_K)),    LCTL(S(KC_L)),    XXXXXXX},
+  {XXXXXXX,    LCAG(KC_M), LGUI(LCTL(KC_R)), LCAG(KC_DOT), LCAG(KC_T), LGUI(LCTL(KC_A)),  LCTL(LALT(KC_M)), LCTL(LALT(KC_H)), LCTL(LALT(KC_J)),  LCTL(LALT(KC_K)), LCTL(LALT(KC_L)), XXXXXXX},
+  {_______,    LCAG(KC_H), LCAG(KC_J),       LCAG(KC_K),   LCAG(KC_L), LGUI(LCTL(KC_S)),  LGUI(LCTL(KC_D)), LGUI(LALT(KC_H)), LGUI(LALT(KC_J)),  LGUI(LALT(KC_K)), LGUI(LALT(KC_L)), _______},
+  {_______,    _______,    _______,          _______,      _______,    _______,           _______,          _______,          _______,           _______,          _______,          _______}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |TogOut|   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN, KC_BSPC},
+  {TOG_PLV, KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_M,    KC_C,    XXXXXXX, XXXXXXX, KC_L,    KC_COMM, XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Workmn|Plover|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  WORKMAN, PLOVER,  _______, _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_workman[][2]    = SONG(WORKMAN_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case WORKMAN:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_workman, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_WORKMAN);
+      }
+      return false;
+      break;
+    case DEAD:
+      if (record->event.pressed) {
+        layer_on(_DEAD);
+        set_oneshot_layer(_DEAD, ONESHOT_START);
+        clear_oneshot_layer_state(ONESHOT_PRESSED);
+      }
+      return false;
+      break;
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_NOTE_ARRAY(tone_plover, false, 0);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  case TOG_PLV:
+    if (record->event.pressed) {
+      register_code(KC_R);
+      register_code(KC_W);
+      register_code(KC_T);
+      register_code(KC_C);
+      register_code(KC_P);
+      register_code(KC_O);
+      clear_keyboard();
+    }
+    return false;
+    break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
diff --git a/keyboards/planck/keymaps/jhenahan/readme.md b/keyboards/planck/keymaps/jhenahan/readme.md
new file mode 100644
index 0000000000..1d803fe321
--- /dev/null
+++ b/keyboards/planck/keymaps/jhenahan/readme.md
@@ -0,0 +1,35 @@
+# jhenahan's layout
+
+## Layout
+
+The base layer is based on the
+[Workman Dead](https://github.com/ojbucao/Workman/tree/master/mac) layout. The
+primary interaction layer is a slightly modified Workman layout with a 'dead'
+key on the third row under the middle finger. The dead key activates a layer of
+special characters.
+
+## [Layers](http://www.keyboard-layout-editor.com/#/gists/2b875f7d5d76fe4408c0a5b3bd76ddae)
+### Function Layer
+
+This is very slightly modified from the default, mainly just to rearrange the media keys.
+
+### [KWM](https://github.com/koekeishiya/kwm) Interaction Layer
+
+`kwm` is a tiling window manager for OS X. The keys defined in my keymap
+correspond to the settings I use in
+[my `kwmrc` file](https://github.com/jhenahan/dotfiles/blob/master/kwm/kwmrc).
+
+### QWERTY
+
+Just in case.
+
+### [Plover](http://www.openstenoproject.org/plover/)
+
+The Plover layer in this keymap is identical to that of the default. This layout
+functions exactly as a QWERTY layout unless you're running the Plover
+application.
+
+### Adjust Layer
+
+This layer is only slightly modified from the default to remove Dvorak and
+Colemak and replace them with Workman.
-- 
cgit v1.2.3


From 6d7637ae3eb4b37ab7d294818aa92ea9562df4b9 Mon Sep 17 00:00:00 2001
From: Jack Henahan <jhenahan@me.com>
Date: Mon, 29 Aug 2016 11:43:06 -0400
Subject: Update README

---
 keyboards/planck/keymaps/jhenahan/readme.md | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/jhenahan/readme.md b/keyboards/planck/keymaps/jhenahan/readme.md
index 1d803fe321..a80506fc9d 100644
--- a/keyboards/planck/keymaps/jhenahan/readme.md
+++ b/keyboards/planck/keymaps/jhenahan/readme.md
@@ -25,9 +25,15 @@ Just in case.
 
 ### [Plover](http://www.openstenoproject.org/plover/)
 
-The Plover layer in this keymap is identical to that of the default. This layout
-functions exactly as a QWERTY layout unless you're running the Plover
-application.
+This layout functions exactly as a Workman layout unless you're running the Plover
+application. Includes a key for toggling Plover while it's running.
+
+Add this in the appropriate section of your `plover.cfg` to allow this altered layout:
+
+``` ini
+[System: English Stenotype]
+keymap[keyboard] = [["#", ["1", "2", "3", "4", "5", "6", "7", "8", "9", "0", "-", "="]], ["S-", ["q", "a"]], ["T-", ["d"]], ["K-", ["s"]], ["P-", ["r"]], ["W-", ["h"]], ["H-", ["w"]], ["R-", ["t"]], ["A-", ["m"]], ["O-", ["c"]], ["*", ["y", "g", "j", "b"]], ["-E", ["l"]], ["-U", [","]], ["-F", ["f"]], ["-R", ["n"]], ["-P", ["u"]], ["-B", ["e"]], ["-L", ["p"]], ["-G", ["o"]], ["-T", [";"]], ["-S", ["i"]], ["-D", ["BackSpace"]], ["-Z", ["'"]], ["no-op", ["\\", "]", "x", ".", "/"]], ["arpeggiate", ["space"]]]
+```
 
 ### Adjust Layer
 
-- 
cgit v1.2.3