From 411ed54b0a4ab2d9e93b22cb22fc988c763cf277 Mon Sep 17 00:00:00 2001 From: Zykrah <23428162+zykrah@users.noreply.github.com> Date: Tue, 13 Dec 2022 20:23:37 +1100 Subject: [Keyboard] Add Fuyu (#19055) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/zykrah/fuyu/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/zykrah/fuyu/readme.md (limited to 'keyboards/zykrah/fuyu/readme.md') diff --git a/keyboards/zykrah/fuyu/readme.md b/keyboards/zykrah/fuyu/readme.md new file mode 100644 index 0000000000..88a3ea806e --- /dev/null +++ b/keyboards/zykrah/fuyu/readme.md @@ -0,0 +1,27 @@ +# FUYU + +![FUYU](https://i.imgur.com/uWB5EqJh.png) + +A F12 TKL H87-Compat Type-C PCB for the Geon F1-8K + +* Keyboard Maintainer: [Zykrah](https://github.com/zykrah) +* Hardware Supported: Fuyu rev1 PCB +* Hardware Availability: [Github Repo](https://github.com/zykrah/fuyu), [GEON Store](https://geon.works/products/fuyu-pcb-for-f1-8k), [CustomKBD](https://customkbd.com/products/fuyu-pcb-for-f1-8k) + +Make example for this keyboard (after setting up your build environment): + + make zykrah/fuyu:default + +Flashing example for this keyboard: + + make zykrah/fuyu:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly short the `RST` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3