From bffbb4b42d3167125f54b5aeb7a30fef44ff5dbe Mon Sep 17 00:00:00 2001 From: Wilba Date: Sun, 21 Jul 2019 21:46:22 +1000 Subject: Refactoring wilba.tech PCBs, updating Rama Works U80-A (#6272) * Added WT65-B, WT75-B, minor fixes * Update keyboards/wilba_tech/wt65_b/config.h Co-Authored-By: Drashna Jaelre * Update keyboards/wilba_tech/wt65_b/readme.md Co-Authored-By: fauxpark * Update keyboards/wilba_tech/wt75_b/config.h Co-Authored-By: Drashna Jaelre * Change DEBOUNCING_DELAY to DEBOUNCE * Change DEBOUNCING_DELAY to DEBOUNCE * Move Zeal60/Zeal65 files to keyboards/wilba_tech * Change DEBOUNCING_DELAY to DEBOUNCE * Refactoring zeal60 code to wilba_tech * Moved Rama Works PCBs to wilba_tech * Rename Rama Works files * Cleanup info.json * Cleanup readme.md * Cleanup USB device strings * U80-A RGB matrix, IS31FL3731 driver changes * Fixed #include from keyboards/zeal60 --- keyboards/zeal60/rules.mk | 79 ----------------------------------------------- 1 file changed, 79 deletions(-) delete mode 100644 keyboards/zeal60/rules.mk (limited to 'keyboards/zeal60/rules.mk') diff --git a/keyboards/zeal60/rules.mk b/keyboards/zeal60/rules.mk deleted file mode 100644 index 1327d88210..0000000000 --- a/keyboards/zeal60/rules.mk +++ /dev/null @@ -1,79 +0,0 @@ - - -# project specific files -SRC = rgb_backlight.c \ - quantum/color.c \ - drivers/issi/is31fl3731.c \ - drivers/avr/i2c_master.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section -BOOTLOADER = atmel-dfu - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes -CIE1931_CURVE = yes - -LAYOUTS = 60_ansi 60_iso 60_hhkb 60_ansi_split_bs_rshift -- cgit v1.2.3