From 78ccd9c201199444bc06161b05ee8d7ba9c31613 Mon Sep 17 00:00:00 2001
From: peepeetee <43021794+peepeetee@users.noreply.github.com>
Date: Sat, 21 Aug 2021 22:53:49 -0500
Subject: Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159)

* reset; redoing my steps; and recommit

* include xd002/.noci
---
 keyboards/xiudi/xd68/config.h | 115 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 keyboards/xiudi/xd68/config.h

(limited to 'keyboards/xiudi/xd68/config.h')

diff --git a/keyboards/xiudi/xd68/config.h b/keyboards/xiudi/xd68/config.h
new file mode 100644
index 0000000000..4fbb66b815
--- /dev/null
+++ b/keyboards/xiudi/xd68/config.h
@@ -0,0 +1,115 @@
+/*
+Copyright 2019 Michael Campbell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7844   // "XD"
+#define PRODUCT_ID      0x6868
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    xiudi
+#define PRODUCT         XD68
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
+#define BACKLIGHT_PIN F5
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+#define BACKLIGHT_ON_STATE 0
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+// ws2812 options
+#define RGB_DI_PIN F6 // pin the DI on the ws2812 is hooked-up to
+#define RGBLIGHT_ANIMATIONS // run RGB animations
+#define RGBLED_NUM 12 // number of LEDs
+#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
+#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
-- 
cgit v1.2.3