From b1783db4eacacaf8181cfbce13146db1941486ba Mon Sep 17 00:00:00 2001 From: Ryan Date: Sun, 18 Jun 2023 14:39:07 +1000 Subject: Move `RGBLED_NUM` to data driven (#21278) --- keyboards/wilba_tech/wt70_jb/config.h | 1 - keyboards/wilba_tech/wt70_jb/info.json | 3 +++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'keyboards/wilba_tech') diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h index 914d9b2763..3408a65ee4 100644 --- a/keyboards/wilba_tech/wt70_jb/config.h +++ b/keyboards/wilba_tech/wt70_jb/config.h @@ -21,7 +21,6 @@ #define LOCKING_RESYNC_ENABLE // RGBLIGHT configuation - #define RGBLED_NUM 2 #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json index d750e86d90..b04b964090 100644 --- a/keyboards/wilba_tech/wt70_jb/info.json +++ b/keyboards/wilba_tech/wt70_jb/info.json @@ -8,6 +8,9 @@ "pid": "0x001F", "device_version": "0.0.1" }, + "rgblight": { + "led_count": 2 + }, "ws2812": { "pin": "B2" }, -- cgit v1.2.3 From 4ae9bfd17ab01608e1bf2492c35d79bd2ad5c0fe Mon Sep 17 00:00:00 2001 From: Ryan Date: Sat, 24 Jun 2023 17:37:54 +1000 Subject: Move `RGBLIGHT_HUE/SAT/VAL_STEP` to data driven (#21292) Co-authored-by: Nick Brassel --- keyboards/wilba_tech/wt70_jb/config.h | 3 --- keyboards/wilba_tech/wt70_jb/info.json | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'keyboards/wilba_tech') diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h index 3408a65ee4..83db90da84 100644 --- a/keyboards/wilba_tech/wt70_jb/config.h +++ b/keyboards/wilba_tech/wt70_jb/config.h @@ -21,9 +21,6 @@ #define LOCKING_RESYNC_ENABLE // RGBLIGHT configuation - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json index b04b964090..b03e9e6f73 100644 --- a/keyboards/wilba_tech/wt70_jb/info.json +++ b/keyboards/wilba_tech/wt70_jb/info.json @@ -9,6 +9,8 @@ "device_version": "0.0.1" }, "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, "led_count": 2 }, "ws2812": { -- cgit v1.2.3 From 37bc9499453f95e4e835faa751dbfffff9bfd644 Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 23 Aug 2023 10:00:03 +1000 Subject: RGB Matrix: driver naming cleanups (#21594) --- keyboards/wilba_tech/wt_mono_backlight.c | 28 +++--- keyboards/wilba_tech/wt_rgb_backlight.c | 144 +++++++++++++++---------------- 2 files changed, 86 insertions(+), 86 deletions(-) (limited to 'keyboards/wilba_tech') diff --git a/keyboards/wilba_tech/wt_mono_backlight.c b/keyboards/wilba_tech/wt_mono_backlight.c index c79fc02cd9..28ee5fae81 100644 --- a/keyboards/wilba_tech/wt_mono_backlight.c +++ b/keyboards/wilba_tech/wt_mono_backlight.c @@ -64,12 +64,12 @@ void backlight_init_drivers(void) { // Initialize I2C i2c_init(); - IS31FL3736_init( ISSI_ADDR_DEFAULT ); + is31fl3736_init( ISSI_ADDR_DEFAULT ); for ( uint8_t index = 0; index < 96; index++ ) { - IS31FL3736_mono_set_led_control_register( index, true ); + is31fl3736_mono_set_led_control_register( index, true ); } - IS31FL3736_update_led_control_registers( ISSI_ADDR_DEFAULT, 0x00 ); + is31fl3736_update_led_control_registers( ISSI_ADDR_DEFAULT, 0x00 ); } void backlight_set_key_hit(uint8_t row, uint8_t column) @@ -119,17 +119,17 @@ void backlight_set_suspend_state(bool state) void backlight_set_brightness_all( uint8_t value ) { - IS31FL3736_mono_set_brightness_all( value ); + is31fl3736_mono_set_brightness_all( value ); } void backlight_effect_all_off(void) { - IS31FL3736_mono_set_brightness_all( 0 ); + is31fl3736_mono_set_brightness_all( 0 ); } void backlight_effect_all_on(void) { - IS31FL3736_mono_set_brightness_all( g_config.brightness ); + is31fl3736_mono_set_brightness_all( g_config.brightness ); } void backlight_effect_raindrops(bool initialize) @@ -143,7 +143,7 @@ void backlight_effect_raindrops(bool initialize) // If not, all but one will stay the same as before. if ( initialize || i == led_to_change ) { - IS31FL3736_mono_set_brightness(i, rand() & 0xFF ); + is31fl3736_mono_set_brightness(i, rand() & 0xFF ); } } } @@ -165,9 +165,9 @@ void backlight_effect_indicators(void) // SW7,CS8 = (6*8+7) = 55 // SW8,CS8 = (7*8+7) = 63 // SW9,CS8 = (8*8+7) = 71 - IS31FL3736_mono_set_brightness(55, rgb.r); - IS31FL3736_mono_set_brightness(63, rgb.g); - IS31FL3736_mono_set_brightness(71, rgb.b); + is31fl3736_mono_set_brightness(55, rgb.r); + is31fl3736_mono_set_brightness(63, rgb.g); + is31fl3736_mono_set_brightness(71, rgb.b); #endif // MONO_BACKLIGHT_WT75_A // This pairs with "All Off" already setting zero brightness, @@ -181,19 +181,19 @@ defined(MONO_BACKLIGHT_WT75_C) || \ defined(MONO_BACKLIGHT_WT80_A) if ( host_keyboard_led_state().caps_lock ) { // SW3,CS1 = (2*8+0) = 16 - IS31FL3736_mono_set_brightness(16, 255); + is31fl3736_mono_set_brightness(16, 255); } #endif #if defined(MONO_BACKLIGHT_WT80_A) if ( host_keyboard_led_state().scroll_lock ) { // SW7,CS7 = (6*8+6) = 54 - IS31FL3736_mono_set_brightness(54, 255); + is31fl3736_mono_set_brightness(54, 255); } #endif #if defined(MONO_BACKLIGHT_WT75_C) if ( host_keyboard_led_state().scroll_lock ) { // SW7,CS8 = (6*8+7) = 55 - IS31FL3736_mono_set_brightness(55, 255); + is31fl3736_mono_set_brightness(55, 255); } #endif } @@ -361,7 +361,7 @@ void backlight_config_save(void) void backlight_update_pwm_buffers(void) { - IS31FL3736_update_pwm_buffers(ISSI_ADDR_DEFAULT,0x00); + is31fl3736_update_pwm_buffers(ISSI_ADDR_DEFAULT,0x00); } bool process_record_backlight(uint16_t keycode, keyrecord_t *record) diff --git a/keyboards/wilba_tech/wt_rgb_backlight.c b/keyboards/wilba_tech/wt_rgb_backlight.c index 1cd00ae41f..6c57416622 100644 --- a/keyboards/wilba_tech/wt_rgb_backlight.c +++ b/keyboards/wilba_tech/wt_rgb_backlight.c @@ -1771,36 +1771,36 @@ void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led ) void backlight_update_pwm_buffers(void) { #if defined(RGB_BACKLIGHT_M6_B) - IS31FL3218_update_pwm_buffers(); + is31fl3218_update_pwm_buffers(); #elif defined(RGB_BACKLIGHT_PORTICO75) - IS31FL3741_update_pwm_buffers( ISSI_ADDR_1, 0 ); - IS31FL3741_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3741_update_pwm_buffers( ISSI_ADDR_1, 0 ); + is31fl3741_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_M10_C) - IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); + is31fl3731_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_HS60) - IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3733_update_pwm_buffers( ISSI_ADDR_1, 0 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_NEBULA68) || defined(RGB_BACKLIGHT_NK87) || defined(RGB_BACKLIGHT_KW_MEGA) - IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 ); - IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); + is31fl3733_update_pwm_buffers( ISSI_ADDR_1, 0 ); + is31fl3733_update_pwm_buffers( ISSI_ADDR_2, 1 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #elif defined(RGB_BACKLIGHT_NEBULA12) - IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); + is31fl3731_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_U80_A) static uint8_t driver = 0; switch ( driver ) { case 0: - IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); + is31fl3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); break; case 1: - IS31FL3731_update_pwm_buffers( ISSI_ADDR_2, 1 ); + is31fl3731_update_pwm_buffers( ISSI_ADDR_2, 1 ); break; case 2: - IS31FL3731_update_pwm_buffers( ISSI_ADDR_3, 2 ); + is31fl3731_update_pwm_buffers( ISSI_ADDR_3, 2 ); break; } if ( ++driver > 2 ) @@ -1808,31 +1808,31 @@ void backlight_update_pwm_buffers(void) driver = 0; } #else - IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); - IS31FL3731_update_pwm_buffers( ISSI_ADDR_2, 1 ); - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 ); - IS31FL3731_update_led_control_registers( ISSI_ADDR_2, 1 ); + is31fl3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); + is31fl3731_update_pwm_buffers( ISSI_ADDR_2, 1 ); + is31fl3731_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3731_update_led_control_registers( ISSI_ADDR_2, 1 ); #endif } void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) { #if defined(RGB_BACKLIGHT_M6_B) - IS31FL3218_set_color( index, red, green, blue ); + is31fl3218_set_color( index, red, green, blue ); #elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_NEBULA68) || defined(RGB_BACKLIGHT_KW_MEGA) - IS31FL3733_set_color( index, red, green, blue ); + is31fl3733_set_color( index, red, green, blue ); #elif defined (RGB_BACKLIGHT_PORTICO) - IS31FL3731_set_color( index, red, green, blue ); + is31fl3731_set_color( index, red, green, blue ); #elif defined (RGB_BACKLIGHT_PORTICO75) - IS31FL3741_set_color( index, red, green, blue ); + is31fl3741_set_color( index, red, green, blue ); #elif defined(RGB_BACKLIGHT_NK87) // This is done to avoid indicator LEDs being set if (( index != 63+64-1 ) && ( index != 48+64-1 )) { - IS31FL3733_set_color( index, red, green, blue ); + is31fl3733_set_color( index, red, green, blue ); } #elif defined(RGB_BACKLIGHT_DAWN60) if( index < RGB_MATRIX_LED_COUNT ) { - IS31FL3731_set_color( index, red, green, blue ); + is31fl3731_set_color( index, red, green, blue ); } else { g_ws2812_leds[index - RGB_MATRIX_LED_COUNT].r = red; g_ws2812_leds[index - RGB_MATRIX_LED_COUNT].g = green; @@ -1840,38 +1840,38 @@ void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) ws2812_setleds(g_ws2812_leds, WS2812_LED_TOTAL); } #else - IS31FL3731_set_color( index, red, green, blue ); + is31fl3731_set_color( index, red, green, blue ); #endif } void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) { #if defined(RGB_BACKLIGHT_M6_B) - IS31FL3218_set_color_all( red, green, blue ); + is31fl3218_set_color_all( red, green, blue ); #elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_NEBULA68) || defined(RGB_BACKLIGHT_KW_MEGA) // This is done to avoid indicator LEDs being set for (int i = 0; i < BACKLIGHT_LED_COUNT; i++) { - IS31FL3733_set_color(i, red, green, blue); + is31fl3733_set_color(i, red, green, blue); } #elif defined (RGB_BACKLIGHT_PORTICO) // This is done to avoid indicator LEDs being set for (int i = 0; i < BACKLIGHT_LED_COUNT; i++) { - IS31FL3731_set_color(i, red, green, blue); + is31fl3731_set_color(i, red, green, blue); } #elif defined (RGB_BACKLIGHT_PORTICO75) // This is done to avoid indicator LEDs being set for (int i = 0; i < BACKLIGHT_LED_COUNT; i++) { - IS31FL3741_set_color(i, red, green, blue); + is31fl3741_set_color(i, red, green, blue); } #elif defined(RGB_BACKLIGHT_NK87) // This is done to avoid indicator LEDs being set for (int i = 0; i < BACKLIGHT_LED_COUNT; i++) { if (( i != 63+64-1 ) && ( i != 48+64-1 )) { - IS31FL3733_set_color(i, red, green, blue); + is31fl3733_set_color(i, red, green, blue); } } #elif defined(RGB_BACKLIGHT_DAWN60) - IS31FL3731_set_color_all( red, green, blue ); + is31fl3731_set_color_all( red, green, blue ); for (uint8_t i = 0; i < WS2812_LED_TOTAL; i++) { g_ws2812_leds[i].r = red; g_ws2812_leds[i].g = green; @@ -1879,7 +1879,7 @@ void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) } ws2812_setleds(g_ws2812_leds, WS2812_LED_TOTAL); #else - IS31FL3731_set_color_all( red, green, blue ); + is31fl3731_set_color_all( red, green, blue ); #endif } @@ -2914,9 +2914,9 @@ void backlight_init_drivers(void) i2c_init(); #if defined(RGB_BACKLIGHT_M6_B) - IS31FL3218_init(); + is31fl3218_init(); #elif defined(RGB_BACKLIGHT_HS60) - IS31FL3733_init( ISSI_ADDR_1, 0 ); + is31fl3733_init( ISSI_ADDR_1, 0 ); for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) { @@ -2932,28 +2932,28 @@ void backlight_init_drivers(void) ( index == 61-1 ) ); //LA61 #endif // This only caches it for later - IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + is31fl3733_set_led_control_register( index, enabled, enabled, enabled ); } // This actually updates the LED drivers - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_NK65) - IS31FL3733_init( ISSI_ADDR_1, 0 ); - IS31FL3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, 0 ); + is31fl3733_init( ISSI_ADDR_2, 0 ); for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) { bool enabled = !( ( index == 61-1 ) || //LA61 ( index > 6+64-1 ) ); //LB7-LB64 // This only caches it for later - IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + is31fl3733_set_led_control_register( index, enabled, enabled, enabled ); } - IS31FL3733_set_led_control_register( 7+64-1, 0, 1, 0 ); //Enable LB7 green enable for indicators + is31fl3733_set_led_control_register( 7+64-1, 0, 1, 0 ); //Enable LB7 green enable for indicators // This actually updates the LED drivers - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #elif defined(RGB_BACKLIGHT_NK87) - IS31FL3733_init( ISSI_ADDR_1, 0 ); - IS31FL3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, 0 ); + is31fl3733_init( ISSI_ADDR_2, 0 ); for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) { @@ -2975,59 +2975,59 @@ void backlight_init_drivers(void) ( index == 58+64-1 ) || ( index == 62+64-1 ) ); // This only caches it for later - IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + is31fl3733_set_led_control_register( index, enabled, enabled, enabled ); } - IS31FL3733_set_led_control_register( 48+64-1, 0, 0, 1 ); //Enable LB48 blue enable for indicators + is31fl3733_set_led_control_register( 48+64-1, 0, 0, 1 ); //Enable LB48 blue enable for indicators // This actually updates the LED drivers - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #elif defined(RGB_BACKLIGHT_NEBULA68) - IS31FL3733_init( ISSI_ADDR_1, 0 ); - IS31FL3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, 0 ); + is31fl3733_init( ISSI_ADDR_2, 0 ); for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) { bool enabled = !( ( index == 61-1 ) || //LA61 ( index > 5+64-1 ) ); //LB6-LB64 // This only caches it for later - IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + is31fl3733_set_led_control_register( index, enabled, enabled, enabled ); } // This actually updates the LED drivers - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #elif defined(RGB_BACKLIGHT_PORTICO75) - IS31FL3741_init( ISSI_ADDR_1 ); + is31fl3741_init( ISSI_ADDR_1 ); bool enabled = true; for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) { - IS31FL3741_set_led_control_register( index, enabled, enabled, enabled ); + is31fl3741_set_led_control_register( index, enabled, enabled, enabled ); } // This actually updates the LED drivers - IS31FL3741_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3741_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_KW_MEGA) - IS31FL3733_init( ISSI_ADDR_1, 0 ); - IS31FL3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, 0 ); + is31fl3733_init( ISSI_ADDR_2, 0 ); for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) { bool enabled = !( ( index == 61-1 ) || //LA61 ( index > 6+64-1 ) ); //LB7-LB64 // This only caches it for later - IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + is31fl3733_set_led_control_register( index, enabled, enabled, enabled ); } // This actually updates the LED drivers - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #else // Init the #1 driver - IS31FL3731_init( ISSI_ADDR_1 ); + is31fl3731_init( ISSI_ADDR_1 ); // Init the #2 driver (if used) #if !defined(RGB_BACKLIGHT_NEBULA12) && !defined(RGB_BACKLIGHT_M10_C) - IS31FL3731_init( ISSI_ADDR_2 ); + is31fl3731_init( ISSI_ADDR_2 ); #endif // Init the #3 driver (if used) #if defined(RGB_BACKLIGHT_U80_A) - IS31FL3731_init( ISSI_ADDR_3 ); + is31fl3731_init( ISSI_ADDR_3 ); #endif // Experimental feature, not in configuration yet @@ -3156,16 +3156,16 @@ void backlight_init_drivers(void) bool enabled = true; #endif // This only caches it for later - IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); + is31fl3731_set_led_control_register( index, enabled, enabled, enabled ); } // This actually updates the LED drivers // TODO: refactor this to use DRIVER_COUNT - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 ); + is31fl3731_update_led_control_registers( ISSI_ADDR_1, 0 ); #if !defined(RGB_BACKLIGHT_NEBULA12) && !defined(RGB_BACKLIGHT_M10_C) - IS31FL3731_update_led_control_registers( ISSI_ADDR_2, 1 ); + is31fl3731_update_led_control_registers( ISSI_ADDR_2, 1 ); #endif #if defined(RGB_BACKLIGHT_U80_A) - IS31FL3731_update_led_control_registers( ISSI_ADDR_3, 2 ); + is31fl3731_update_led_control_registers( ISSI_ADDR_3, 2 ); #endif #endif @@ -3399,11 +3399,11 @@ void backlight_test_led( uint8_t index, bool red, bool green, bool blue ) { if ( i == index ) { - IS31FL3731_set_led_control_register( i, red, green, blue ); + is31fl3731_set_led_control_register( i, red, green, blue ); } else { - IS31FL3731_set_led_control_register( i, false, false, false ); + is31fl3731_set_led_control_register( i, false, false, false ); } } } -- cgit v1.2.3 From 023d644bb69748d97feb49091e2c24f3fcd3da11 Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 24 Aug 2023 07:11:39 +1000 Subject: Move RGBLight animations to data driven (#21635) * Move RGBLight animations to data driven, 0-9 * Move RGBLight animations to data driven, A * Move RGBLight animations to data driven, B * Move RGBLight animations to data driven, C * Move RGBLight animations to data driven, D * Move RGBLight animations to data driven, E * Move RGBLight animations to data driven, F * Move RGBLight animations to data driven, G * Move RGBLight animations to data driven, H * Move RGBLight animations to data driven, handwired * Move RGBLight animations to data driven, I * Move RGBLight animations to data driven, J * Move RGBLight animations to data driven, K * Move RGBLight animations to data driven, L * Move RGBLight animations to data driven, M * Move RGBLight animations to data driven, N * Move RGBLight animations to data driven, O * Move RGBLight animations to data driven, P * Move RGBLight animations to data driven, Q * Move RGBLight animations to data driven, R * Move RGBLight animations to data driven, S * Move RGBLight animations to data driven, T * Move RGBLight animations to data driven, U * Move RGBLight animations to data driven, V * Move RGBLight animations to data driven, W * Move RGBLight animations to data driven, X * Move RGBLight animations to data driven, Y * Move RGBLight animations to data driven, Z * Fix incorrect placement * Fix build failures and mismatches --- keyboards/wilba_tech/wt70_jb/config.h | 12 ------------ keyboards/wilba_tech/wt70_jb/info.json | 14 +++++++++++++- 2 files changed, 13 insertions(+), 13 deletions(-) (limited to 'keyboards/wilba_tech') diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h index 83db90da84..9b6b3c7955 100644 --- a/keyboards/wilba_tech/wt70_jb/config.h +++ b/keyboards/wilba_tech/wt70_jb/config.h @@ -19,15 +19,3 @@ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -// RGBLIGHT configuation -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json index b03e9e6f73..e02cb61509 100644 --- a/keyboards/wilba_tech/wt70_jb/info.json +++ b/keyboards/wilba_tech/wt70_jb/info.json @@ -11,7 +11,19 @@ "rgblight": { "saturation_steps": 8, "brightness_steps": 8, - "led_count": 2 + "led_count": 2, + "animations": { + "breathing": true, + "rainbow_mood": true, + "rainbow_swirl": true, + "snake": true, + "knight": true, + "christmas": true, + "static_gradient": true, + "rgb_test": true, + "alternating": true, + "twinkle": true + } }, "ws2812": { "pin": "B2" -- cgit v1.2.3