From 23c365b023e409885e6f201f12df56e5145dde47 Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 6 Mar 2023 09:53:52 +1100 Subject: Move matrix config to info.json, part 1 (#19985) --- .../unicomp/classic_ultracl_post_2013/info.json | 5 +++++ .../overnumpad_1xb/config.h | 24 ---------------------- .../unicomp/classic_ultracl_pre_2013/info.json | 5 +++++ .../overnumpad_1xb/config.h | 24 ---------------------- keyboards/unicomp/pc122/info.json | 5 +++++ keyboards/unicomp/pc122/overnumpad_1xb/config.h | 24 ---------------------- keyboards/unicomp/spacesaver_m_post_2013/info.json | 5 +++++ .../spacesaver_m_post_2013/overnumpad_1xb/config.h | 24 ---------------------- keyboards/unicomp/spacesaver_m_pre_2013/info.json | 5 +++++ .../spacesaver_m_pre_2013/overnumpad_1xb/config.h | 24 ---------------------- 10 files changed, 25 insertions(+), 120 deletions(-) (limited to 'keyboards/unicomp') diff --git a/keyboards/unicomp/classic_ultracl_post_2013/info.json b/keyboards/unicomp/classic_ultracl_post_2013/info.json index dee9f85acc..4535371186 100644 --- a/keyboards/unicomp/classic_ultracl_post_2013/info.json +++ b/keyboards/unicomp/classic_ultracl_post_2013/info.json @@ -8,6 +8,11 @@ "pid": "0x27DB", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["C3", "C2", "C1", "C0", "A3", "A4", "A5", "A6", "A7", "C4", "C5", "B0", "B1", "B10", "B12", "B13"], + "rows": ["B14", "B15", "C6", "C7", "C8", "C9", "A8", "A9"] + }, + "diode_direction": "ROW2COL", "indicators": { "caps_lock": "C11", "num_lock": "C12", diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h index 88eb8c2c51..c02ea1f913 100644 --- a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h @@ -18,30 +18,6 @@ #define SERIAL_NUMBER "purdea.ro:overnumpad_controller" -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -// All pins in order from left-to-right, as seen on the keyboard: -// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, -// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. - -// On this keyboard the right-most pin is not used, so that is A10. -// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. - -#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } -#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/info.json b/keyboards/unicomp/classic_ultracl_pre_2013/info.json index aa28ce85c8..44262e071c 100644 --- a/keyboards/unicomp/classic_ultracl_pre_2013/info.json +++ b/keyboards/unicomp/classic_ultracl_pre_2013/info.json @@ -8,6 +8,11 @@ "pid": "0x27DB", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["C3", "C2", "C1", "C0", "A3", "A4", "A5", "A6", "A7", "C4", "C5", "B0", "B1", "B10", "B12", "B13"], + "rows": ["B14", "B15", "C6", "C7", "C8", "C9", "A8", "A9"] + }, + "diode_direction": "ROW2COL", "indicators": { "caps_lock": "C11", "num_lock": "C12", diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h index 88eb8c2c51..c02ea1f913 100644 --- a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h @@ -18,30 +18,6 @@ #define SERIAL_NUMBER "purdea.ro:overnumpad_controller" -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -// All pins in order from left-to-right, as seen on the keyboard: -// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, -// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. - -// On this keyboard the right-most pin is not used, so that is A10. -// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. - -#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } -#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/unicomp/pc122/info.json b/keyboards/unicomp/pc122/info.json index f1d47ef1b0..6b8a6cf9c7 100644 --- a/keyboards/unicomp/pc122/info.json +++ b/keyboards/unicomp/pc122/info.json @@ -8,6 +8,11 @@ "pid": "0x27DB", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["C3", "C2", "C1", "C0", "A3", "A4", "A5", "A6", "A7", "C4", "C5", "B0", "B1", "B10", "B12", "B13"], + "rows": ["B14", "B15", "C6", "C7", "C8", "C9", "A8", "A9"] + }, + "diode_direction": "ROW2COL", "indicators": { "caps_lock": "C11", "num_lock": "C12", diff --git a/keyboards/unicomp/pc122/overnumpad_1xb/config.h b/keyboards/unicomp/pc122/overnumpad_1xb/config.h index 88eb8c2c51..c02ea1f913 100644 --- a/keyboards/unicomp/pc122/overnumpad_1xb/config.h +++ b/keyboards/unicomp/pc122/overnumpad_1xb/config.h @@ -18,30 +18,6 @@ #define SERIAL_NUMBER "purdea.ro:overnumpad_controller" -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -// All pins in order from left-to-right, as seen on the keyboard: -// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, -// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. - -// On this keyboard the right-most pin is not used, so that is A10. -// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. - -#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } -#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/unicomp/spacesaver_m_post_2013/info.json b/keyboards/unicomp/spacesaver_m_post_2013/info.json index c484553e89..7afe842b8a 100644 --- a/keyboards/unicomp/spacesaver_m_post_2013/info.json +++ b/keyboards/unicomp/spacesaver_m_post_2013/info.json @@ -8,6 +8,11 @@ "pid": "0x27DB", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["C3", "C2", "C1", "C0", "A3", "A4", "A5", "A6", "A7", "C4", "C5", "B0", "B1", "B10", "B12", "B13"], + "rows": ["B14", "B15", "C6", "C7", "C8", "C9", "A8", "A9"] + }, + "diode_direction": "ROW2COL", "indicators": { "caps_lock": "C12" }, diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h index 88eb8c2c51..c02ea1f913 100644 --- a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h @@ -18,30 +18,6 @@ #define SERIAL_NUMBER "purdea.ro:overnumpad_controller" -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -// All pins in order from left-to-right, as seen on the keyboard: -// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, -// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. - -// On this keyboard the right-most pin is not used, so that is A10. -// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. - -#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } -#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/info.json b/keyboards/unicomp/spacesaver_m_pre_2013/info.json index 249b33fdd2..52d2849e8a 100644 --- a/keyboards/unicomp/spacesaver_m_pre_2013/info.json +++ b/keyboards/unicomp/spacesaver_m_pre_2013/info.json @@ -8,6 +8,11 @@ "pid": "0x27DB", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["C3", "C2", "C1", "C0", "A3", "A4", "A5", "A6", "A7", "C4", "C5", "B0", "B1", "B10", "B12", "B13"], + "rows": ["B14", "B15", "C6", "C7", "C8", "C9", "A8", "A9"] + }, + "diode_direction": "ROW2COL", "indicators": { "caps_lock": "C12" }, diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h index 88eb8c2c51..c02ea1f913 100644 --- a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h @@ -18,30 +18,6 @@ #define SERIAL_NUMBER "purdea.ro:overnumpad_controller" -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -// All pins in order from left-to-right, as seen on the keyboard: -// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, -// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. - -// On this keyboard the right-most pin is not used, so that is A10. -// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. - -#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } -#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST -- cgit v1.2.3