From b867522f8cf90aef6f4531e669e35aba5ec0bf1c Mon Sep 17 00:00:00 2001 From: Ryan Date: Tue, 31 Jan 2023 07:45:41 +1100 Subject: Clean up Force NKRO in config.h (#19718) --- keyboards/takashicompany/center_enter/config.h | 21 --------------------- keyboards/takashicompany/compacx/config.h | 21 --------------------- keyboards/takashicompany/dogtag/config.h | 21 --------------------- keyboards/takashicompany/endzone34/config.h | 21 --------------------- keyboards/takashicompany/heavy_left/config.h | 21 --------------------- keyboards/takashicompany/minizone/config.h | 21 --------------------- keyboards/takashicompany/qoolee/config.h | 21 --------------------- keyboards/takashicompany/radialex/config.h | 21 --------------------- 8 files changed, 168 deletions(-) (limited to 'keyboards/takashicompany') diff --git a/keyboards/takashicompany/center_enter/config.h b/keyboards/takashicompany/center_enter/config.h index 42842359b8..3a89589e92 100644 --- a/keyboards/takashicompany/center_enter/config.h +++ b/keyboards/takashicompany/center_enter/config.h @@ -94,27 +94,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashicompany/compacx/config.h b/keyboards/takashicompany/compacx/config.h index ca67aed64b..fe7cffbca9 100644 --- a/keyboards/takashicompany/compacx/config.h +++ b/keyboards/takashicompany/compacx/config.h @@ -90,27 +90,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashicompany/dogtag/config.h b/keyboards/takashicompany/dogtag/config.h index 08661a97b6..b6dc8e4896 100644 --- a/keyboards/takashicompany/dogtag/config.h +++ b/keyboards/takashicompany/dogtag/config.h @@ -93,27 +93,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashicompany/endzone34/config.h b/keyboards/takashicompany/endzone34/config.h index 934fc9b677..fa87b84b60 100644 --- a/keyboards/takashicompany/endzone34/config.h +++ b/keyboards/takashicompany/endzone34/config.h @@ -92,27 +92,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashicompany/heavy_left/config.h b/keyboards/takashicompany/heavy_left/config.h index 0f8a16a607..89fe2991f6 100644 --- a/keyboards/takashicompany/heavy_left/config.h +++ b/keyboards/takashicompany/heavy_left/config.h @@ -86,27 +86,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashicompany/minizone/config.h b/keyboards/takashicompany/minizone/config.h index 75270a48b0..0a1991b5f4 100644 --- a/keyboards/takashicompany/minizone/config.h +++ b/keyboards/takashicompany/minizone/config.h @@ -76,27 +76,6 @@ */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashicompany/qoolee/config.h b/keyboards/takashicompany/qoolee/config.h index 3593870303..219297740b 100644 --- a/keyboards/takashicompany/qoolee/config.h +++ b/keyboards/takashicompany/qoolee/config.h @@ -94,27 +94,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashicompany/radialex/config.h b/keyboards/takashicompany/radialex/config.h index 6691971a0d..c1dd0681ec 100644 --- a/keyboards/takashicompany/radialex/config.h +++ b/keyboards/takashicompany/radialex/config.h @@ -80,27 +80,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. -- cgit v1.2.3