From 1a2a54c326d0bb0dba899b3098487450d6d9dee6 Mon Sep 17 00:00:00 2001 From: Yan-Fa Li Date: Mon, 24 Jun 2019 12:29:54 -0700 Subject: [Keyboard] Add TA-65 PCB to QMK (#6180) * [keyboard] TA-65 by maartenwut Add ta65 to QMK with 4 layouts * Simplify config.h * Simplify keymap * Update bootloader - confirmed to be qmk-dfu by maartenwut * Update keyboards/ta65/readme.md Co-Authored-By: fauxpark * Review feedback - fauxpark recommendations - noroadsleft recommendations * Repair info.json structure JSON objects were not properly nested according to the QMK specification. * Switch info.json to "debug linting" So I can read the file more easily. * Remove k2c and k31 from LAYOUT_tsangan k2c was the Non-US Hash position, and k31 was the Non-US Backslash position, but this layout is intended for ANSI. * Correct LAYOUT_tsangan data in info.json * Update tsangan keymap to use updated LAYOUT_tsangan macro correctly * Rename LAYOUT_tsangan to LAYOUT_ansi_tsangan Increased clarity. * Rename tsangan keymap as default_ansi_tsangan Per QMK Keyboard Guidelines. * Fix object ordering for ISO layouts in info.json ISO Enter's object was out of sequence in both layouts. * Rename ISO keymaps per QMK Keyboard Guidelines - rename iso keymap as default_iso - rename iso_tsangan keymap as default_iso_tsangan * Add default_ansi keymap For user reference. * Enable Community Layout support LAYOUT_ansi and LAYOUT_iso conform to the 65_ansi and 65_iso Community Layouts, respectively. - rename LAYOUT_ansi to LAYOUT_65_ansi - rename LAYOUT_iso to LAYOUT_65_iso - update keymaps as appropriate - add LAYOUTS rule to rules.mk * Disambiguate key labels in info.json * Remove trailing white space from info.json * Update keyboards/ta65/keymaps/maartenwut/config.h Co-Authored-By: Drashna Jaelre --- keyboards/ta65/rules.mk | 65 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 keyboards/ta65/rules.mk (limited to 'keyboards/ta65/rules.mk') diff --git a/keyboards/ta65/rules.mk b/keyboards/ta65/rules.mk new file mode 100644 index 0000000000..47207cd46d --- /dev/null +++ b/keyboards/ta65/rules.mk @@ -0,0 +1,65 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +BOOTLOADER = qmk-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +LAYOUTS = 65_ansi 65_iso -- cgit v1.2.3