From b8bbd0cb9a6f5ded5c1ec31bf0249ed843d200e8 Mon Sep 17 00:00:00 2001 From: Uy Bui Date: Wed, 8 Jun 2022 01:28:13 +0700 Subject: [Keyboard] Add Stello65 keyboard (#17168) * [Keyboard] add Stello65 keyboard * Apply suggestions from code review Co-authored-by: Drashna Jaelre * Apply suggestions from code review Co-authored-by: Ryan * [Keyboard] update config pinout for stello65_sl_rev1 Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/stello65/sl_rev1/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/stello65/sl_rev1/readme.md (limited to 'keyboards/stello65/sl_rev1/readme.md') diff --git a/keyboards/stello65/sl_rev1/readme.md b/keyboards/stello65/sl_rev1/readme.md new file mode 100644 index 0000000000..027ab25a3a --- /dev/null +++ b/keyboards/stello65/sl_rev1/readme.md @@ -0,0 +1,27 @@ +# Stello65 + +![Stello65](https://i.imgur.com/dvzVYH1h.png) + +Stello keyboard + +* Keyboard Maintainer: [@wekey](https://github.com/wekey-dev) +* Hardware Supported: Stello65 case, ATMEGA32U4 +* Hardware Availability: Group buy + +Make example for this keyboard (after setting up your build environment): + + make stello65/sl_rev1:default + +Flashing example for this keyboard: + + make stello65/sl_rev1:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.3